drivers/net/arcnet/Kconfig

   1 #
   2 # Arcnet configuration
   3 #
   4
   5 menuconfig ARCNET
   6         depends on NETDEVICES && (ISA || PCI)
   7         tristate "ARCnet support"
   8         ---help---
   9           If you have a network card of this type, say Y and check out the
  10           (arguably) beautiful poetry in
  11           <file:Documentation/networking/arcnet.txt>.
  12
  13           You need both this driver, and the driver for the particular ARCnet
  14           chipset of your card. If you don't know, then it's probably a
  15           COM90xx type card, so say Y (or M) to "ARCnet COM90xx chipset
  16           support" below.
  17
  18           You might also want to have a look at the Ethernet-HOWTO, available
  19           from <http://www.tldp.org/docs.html#howto>(even though ARCnet
  20           is not really Ethernet).
  21
  22           To compile this driver as a module, choose M here and read
  23           <file:Documentation/networking/net-modules.txt>.  The module will
  24           be called arcnet.
  25
  26 if ARCNET
  27
  28 config ARCNET_1201
  29         tristate "Enable standard ARCNet packet format (RFC 1201)"
  30         help
  31           This allows you to use RFC1201 with your ARCnet card via the virtual
  32           arc0 device.  You need to say Y here to communicate with
  33           industry-standard RFC1201 implementations, like the arcether.com
  34           packet driver or most DOS/Windows ODI drivers.  Please read the
  35           ARCnet documentation in <file:Documentation/networking/arcnet.txt>
  36           for more information about using arc0.
  37
  38 config ARCNET_1051
  39         tristate "Enable old ARCNet packet format (RFC 1051)"
  40         ---help---
  41           This allows you to use RFC1051 with your ARCnet card via the virtual
  42           arc0s device. You only need arc0s if you want to talk to ARCnet
  43           software complying with the "old" standard, specifically, the DOS
  44           arcnet.com packet driver, Amigas running AmiTCP, and some variants
  45           of NetBSD. You do not need to say Y here to communicate with
  46           industry-standard RFC1201 implementations, like the arcether.com
  47           packet driver or most DOS/Windows ODI drivers. RFC1201 is included
  48           automatically as the arc0 device. Please read the ARCnet
  49           documentation in <file:Documentation/networking/arcnet.txt> for more
  50           information about using arc0e and arc0s.
  51
  52 config ARCNET_RAW
  53         tristate "Enable raw mode packet interface"
  54         help
  55           ARCnet "raw mode" packet encapsulation, no soft headers.  Unlikely
  56           to work unless talking to a copy of the same Linux arcnet driver,
  57           but perhaps marginally faster in that case.
  58
  59 config ARCNET_CAP
  60         tristate "Enable CAP mode packet interface"
  61         help
  62           ARCnet "cap mode" packet encapsulation. Used to get the hardware
  63           acknowledge back to userspace. After the initial protocol byte every
  64           packet is stuffed with an extra 4 byte "cookie" which doesn't
  65           actually appear on the network. After transmit the driver will send
  66           back a packet with protocol byte 0 containing the status of the
  67           transmission:
  68              0=no hardware acknowledge
  69              1=excessive nak
  70              2=transmission accepted by the receiver hardware
  71
  72           Received packets are also stuffed with the extra 4 bytes but it will
  73           be random data.
  74
  75           Cap only listens to protocol 1-8.
  76
  77 config ARCNET_COM90xx
  78         tristate "ARCnet COM90xx (normal) chipset driver"
  79         help
  80           This is the chipset driver for the standard COM90xx cards. If you
  81           have always used the old ARCnet driver without knowing what type of
  82           card you had, this is probably the one for you.
  83
  84           To compile this driver as a module, choose M here and read
  85           <file:Documentation/networking/net-modules.txt>.  The module will
  86           be called com90xx.
  87
  88 config ARCNET_COM90xxIO
  89         tristate "ARCnet COM90xx (IO mapped) chipset driver"
  90         ---help---
  91           This is the chipset driver for the COM90xx cards, using them in
  92           IO-mapped mode instead of memory-mapped mode. This is slower than
  93           the normal driver. Only use it if your card doesn't support shared
  94           memory.
  95
  96           To compile this driver as a module, choose M here and read
  97           <file:Documentation/networking/net-modules.txt>.  The module will
  98           be called com90io.
  99
 100 config ARCNET_RIM_I
 101         tristate "ARCnet COM90xx (RIM I) chipset driver"
 102         ---help---
 103           This is yet another chipset driver for the COM90xx cards, but this
 104           time only using memory-mapped mode, and no IO ports at all. This
 105           driver is completely untested, so if you have one of these cards,
 106           please mail <dwmw2@infradead.org>, especially if it works!
 107
 108           To compile this driver as a module, choose M here and read
 109           <file:Documentation/networking/net-modules.txt>.  The module will
 110           be called arc-rimi.
 111
 112 config ARCNET_COM20020
 113         tristate "ARCnet COM20020 chipset driver"
 114         help
 115           This is the driver for the new COM20020 chipset. It supports such
 116           things as promiscuous mode, so packet sniffing is possible, and
 117           extra diagnostic information.
 118
 119           To compile this driver as a module, choose M here and read
 120           <file:Documentation/networking/net-modules.txt>.  The module will
 121           be called com20020.
 122
 123 config ARCNET_COM20020_ISA
 124         tristate "Support for COM20020 on ISA"
 125         depends on ARCNET_COM20020 && ISA
 126
 127 config ARCNET_COM20020_PCI
 128         tristate "Support for COM20020 on PCI"
 129         depends on ARCNET_COM20020 && PCI
 130
 131 endif # ARCNET