drivers/net/arcnet/Kconfig

   1 #
   2 # Arcnet configuration
   3 #
   4
   5 menu "ARCnet devices"
   6         depends on NETDEVICES && (ISA || PCI)
   7
   8 config ARCNET
   9         tristate "ARCnet support"
  10         ---help---
  11           If you have a network card of this type, say Y and check out the
  12           (arguably) beautiful poetry in
  13           <file:Documentation/networking/arcnet.txt>.
  14
  15           You need both this driver, and the driver for the particular ARCnet
  16           chipset of your card. If you don't know, then it's probably a
  17           COM90xx type card, so say Y (or M) to "ARCnet COM90xx chipset
  18           support" below.
  19
  20           You might also want to have a look at the Ethernet-HOWTO, available
  21           from <http://www.tldp.org/docs.html#howto>(even though ARCnet
  22           is not really Ethernet).
  23
  24           To compile this driver as a module, choose M here and read
  25           <file:Documentation/networking/net-modules.txt>.  The module will
  26           be called arcnet.
  27
  28 config ARCNET_1201
  29         tristate "Enable standard ARCNet packet format (RFC 1201)"
  30         depends on ARCNET
  31         help
  32           This allows you to use RFC1201 with your ARCnet card via the virtual
  33           arc0 device.  You need to say Y here to communicate with
  34           industry-standard RFC1201 implementations, like the arcether.com
  35           packet driver or most DOS/Windows ODI drivers.  Please read the
  36           ARCnet documentation in <file:Documentation/networking/arcnet.txt>
  37           for more information about using arc0.
  38
  39 config ARCNET_1051
  40         tristate "Enable old ARCNet packet format (RFC 1051)"
  41         depends on ARCNET
  42         ---help---
  43           This allows you to use RFC1051 with your ARCnet card via the virtual
  44           arc0s device. You only need arc0s if you want to talk to ARCnet
  45           software complying with the "old" standard, specifically, the DOS
  46           arcnet.com packet driver, Amigas running AmiTCP, and some variants
  47           of NetBSD. You do not need to say Y here to communicate with
  48           industry-standard RFC1201 implementations, like the arcether.com
  49           packet driver or most DOS/Windows ODI drivers. RFC1201 is included
  50           automatically as the arc0 device. Please read the ARCnet
  51           documentation in <file:Documentation/networking/arcnet.txt> for more
  52           information about using arc0e and arc0s.
  53
  54 config ARCNET_RAW
  55         tristate "Enable raw mode packet interface"
  56         depends on ARCNET
  57         help
  58           ARCnet "raw mode" packet encapsulation, no soft headers.  Unlikely
  59           to work unless talking to a copy of the same Linux arcnet driver,
  60           but perhaps marginally faster in that case.
  61
  62 config ARCNET_CAP
  63         tristate "Enable CAP mode packet interface"
  64         depends on ARCNET
  65         help
  66           ARCnet "cap mode" packet encapsulation. Used to get the hardware
  67           acknowledge back to userspace. After the initial protocol byte every
  68           packet is stuffed with an extra 4 byte "cookie" which doesn't
  69           actually appear on the network. After transmit the driver will send
  70           back a packet with protocol byte 0 containing the status of the
  71           transmission:
  72              0=no hardware acknowledge
  73              1=excessive nak
  74              2=transmission accepted by the receiver hardware
  75
  76           Received packets are also stuffed with the extra 4 bytes but it will
  77           be random data.
  78
  79           Cap only listens to protocol 1-8.
  80
  81 config ARCNET_COM90xx
  82         tristate "ARCnet COM90xx (normal) chipset driver"
  83         depends on ARCNET
  84         help
  85           This is the chipset driver for the standard COM90xx cards. If you
  86           have always used the old ARCnet driver without knowing what type of
  87           card you had, this is probably the one for you.
  88
  89           To compile this driver as a module, choose M here and read
  90           <file:Documentation/networking/net-modules.txt>.  The module will
  91           be called com90xx.
  92
  93 config ARCNET_COM90xxIO
  94         tristate "ARCnet COM90xx (IO mapped) chipset driver"
  95         depends on ARCNET
  96         ---help---
  97           This is the chipset driver for the COM90xx cards, using them in
  98           IO-mapped mode instead of memory-mapped mode. This is slower than
  99           the normal driver. Only use it if your card doesn't support shared
 100           memory.
 101
 102           To compile this driver as a module, choose M here and read
 103           <file:Documentation/networking/net-modules.txt>.  The module will
 104           be called com90io.
 105
 106 config ARCNET_RIM_I
 107         tristate "ARCnet COM90xx (RIM I) chipset driver"
 108         depends on ARCNET
 109         ---help---
 110           This is yet another chipset driver for the COM90xx cards, but this
 111           time only using memory-mapped mode, and no IO ports at all. This
 112           driver is completely untested, so if you have one of these cards,
 113           please mail <dwmw2@infradead.org>, especially if it works!
 114
 115           To compile this driver as a module, choose M here and read
 116           <file:Documentation/networking/net-modules.txt>.  The module will
 117           be called arc-rimi.
 118
 119 config ARCNET_COM20020
 120         tristate "ARCnet COM20020 chipset driver"
 121         depends on ARCNET
 122         help
 123           This is the driver for the new COM20020 chipset. It supports such
 124           things as promiscuous mode, so packet sniffing is possible, and
 125           extra diagnostic information.
 126
 127           To compile this driver as a module, choose M here and read
 128           <file:Documentation/networking/net-modules.txt>.  The module will
 129           be called com20020.
 130
 131 config ARCNET_COM20020_ISA
 132         tristate "Support for COM20020 on ISA"
 133         depends on ARCNET_COM20020 && ISA
 134
 135 config ARCNET_COM20020_PCI
 136         tristate "Support for COM20020 on PCI"
 137         depends on ARCNET_COM20020 && PCI
 138
 139 endmenu
 140