1 /* bnx2x_reg.h: Broadcom Everest network driver.
3 * Copyright (c) 2007-2008 Broadcom Corporation
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License as published by
7 * the Free Software Foundation.
9 * The registers description starts with the regsister Access type followed
10 * by size in bits. For example [RW 32]. The access types are:
14 * ST - Statistics register (clear on read)
16 * WB - Wide bus register - the size is over 32 bits and it should be
17 * read/write in consecutive 32 bits accesses
18 * WR - Write Clear (write 1 to clear the bit)
23 /* [R 19] Interrupt register #0 read */
24 #define BRB1_REG_BRB1_INT_STS 0x6011c
25 /* [RW 4] Parity mask register #0 read/write */
26 #define BRB1_REG_BRB1_PRTY_MASK 0x60138
27 /* [R 4] Parity register #0 read */
28 #define BRB1_REG_BRB1_PRTY_STS 0x6012c
29 /* [RW 10] At address BRB1_IND_FREE_LIST_PRS_CRDT initialize free head. At
30 address BRB1_IND_FREE_LIST_PRS_CRDT+1 initialize free tail. At address
31 BRB1_IND_FREE_LIST_PRS_CRDT+2 initialize parser initial credit. */
32 #define BRB1_REG_FREE_LIST_PRS_CRDT 0x60200
33 /* [RW 23] LL RAM data. */
34 #define BRB1_REG_LL_RAM 0x61000
35 /* [R 24] The number of full blocks. */
36 #define BRB1_REG_NUM_OF_FULL_BLOCKS 0x60090
37 /* [ST 32] The number of cycles that the write_full signal towards MAC #0
39 #define BRB1_REG_NUM_OF_FULL_CYCLES_0 0x600c8
40 #define BRB1_REG_NUM_OF_FULL_CYCLES_1 0x600cc
41 #define BRB1_REG_NUM_OF_FULL_CYCLES_4 0x600d8
42 /* [ST 32] The number of cycles that the pause signal towards MAC #0 was
44 #define BRB1_REG_NUM_OF_PAUSE_CYCLES_0 0x600b8
45 #define BRB1_REG_NUM_OF_PAUSE_CYCLES_1 0x600bc
46 /* [RW 10] Write client 0: De-assert pause threshold. */
47 #define BRB1_REG_PAUSE_HIGH_THRESHOLD_0 0x60078
48 #define BRB1_REG_PAUSE_HIGH_THRESHOLD_1 0x6007c
49 /* [RW 10] Write client 0: Assert pause threshold. */
50 #define BRB1_REG_PAUSE_LOW_THRESHOLD_0 0x60068
51 #define BRB1_REG_PAUSE_LOW_THRESHOLD_1 0x6006c
52 /* [R 24] The number of full blocks occpied by port. */
53 #define BRB1_REG_PORT_NUM_OCC_BLOCKS_0 0x60094
54 /* [RW 1] Reset the design by software. */
55 #define BRB1_REG_SOFT_RESET 0x600dc
56 /* [R 5] Used to read the value of the XX protection CAM occupancy counter. */
57 #define CCM_REG_CAM_OCCUP 0xd0188
58 /* [RW 1] CM - CFC Interface enable. If 0 - the valid input is disregarded;
59 acknowledge output is deasserted; all other signals are treated as usual;
60 if 1 - normal activity. */
61 #define CCM_REG_CCM_CFC_IFEN 0xd003c
62 /* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input is
63 disregarded; valid is deasserted; all other signals are treated as usual;
64 if 1 - normal activity. */
65 #define CCM_REG_CCM_CQM_IFEN 0xd000c
66 /* [RW 1] If set the Q index; received from the QM is inserted to event ID.
67 Otherwise 0 is inserted. */
68 #define CCM_REG_CCM_CQM_USE_Q 0xd00c0
69 /* [RW 11] Interrupt mask register #0 read/write */
70 #define CCM_REG_CCM_INT_MASK 0xd01e4
71 /* [R 11] Interrupt register #0 read */
72 #define CCM_REG_CCM_INT_STS 0xd01d8
73 /* [R 27] Parity register #0 read */
74 #define CCM_REG_CCM_PRTY_STS 0xd01e8
75 /* [RW 3] The size of AG context region 0 in REG-pairs. Designates the MS
76 REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5).
77 Is used to determine the number of the AG context REG-pairs written back;
78 when the input message Reg1WbFlg isn't set. */
79 #define CCM_REG_CCM_REG0_SZ 0xd00c4
80 /* [RW 1] CM - STORM 0 Interface enable. If 0 - the acknowledge input is
81 disregarded; valid is deasserted; all other signals are treated as usual;
82 if 1 - normal activity. */
83 #define CCM_REG_CCM_STORM0_IFEN 0xd0004
84 /* [RW 1] CM - STORM 1 Interface enable. If 0 - the acknowledge input is
85 disregarded; valid is deasserted; all other signals are treated as usual;
86 if 1 - normal activity. */
87 #define CCM_REG_CCM_STORM1_IFEN 0xd0008
88 /* [RW 1] CDU AG read Interface enable. If 0 - the request input is
89 disregarded; valid output is deasserted; all other signals are treated as
90 usual; if 1 - normal activity. */
91 #define CCM_REG_CDU_AG_RD_IFEN 0xd0030
92 /* [RW 1] CDU AG write Interface enable. If 0 - the request and valid input
93 are disregarded; all other signals are treated as usual; if 1 - normal
95 #define CCM_REG_CDU_AG_WR_IFEN 0xd002c
96 /* [RW 1] CDU STORM read Interface enable. If 0 - the request input is
97 disregarded; valid output is deasserted; all other signals are treated as
98 usual; if 1 - normal activity. */
99 #define CCM_REG_CDU_SM_RD_IFEN 0xd0038
100 /* [RW 1] CDU STORM write Interface enable. If 0 - the request and valid
101 input is disregarded; all other signals are treated as usual; if 1 -
103 #define CCM_REG_CDU_SM_WR_IFEN 0xd0034
104 /* [RW 4] CFC output initial credit. Max credit available - 15.Write writes
105 the initial credit value; read returns the current value of the credit
106 counter. Must be initialized to 1 at start-up. */
107 #define CCM_REG_CFC_INIT_CRD 0xd0204
108 /* [RW 2] Auxillary counter flag Q number 1. */
109 #define CCM_REG_CNT_AUX1_Q 0xd00c8
110 /* [RW 2] Auxillary counter flag Q number 2. */
111 #define CCM_REG_CNT_AUX2_Q 0xd00cc
112 /* [RW 28] The CM header value for QM request (primary). */
113 #define CCM_REG_CQM_CCM_HDR_P 0xd008c
114 /* [RW 28] The CM header value for QM request (secondary). */
115 #define CCM_REG_CQM_CCM_HDR_S 0xd0090
116 /* [RW 1] QM - CM Interface enable. If 0 - the valid input is disregarded;
117 acknowledge output is deasserted; all other signals are treated as usual;
118 if 1 - normal activity. */
119 #define CCM_REG_CQM_CCM_IFEN 0xd0014
120 /* [RW 6] QM output initial credit. Max credit available - 32. Write writes
121 the initial credit value; read returns the current value of the credit
122 counter. Must be initialized to 32 at start-up. */
123 #define CCM_REG_CQM_INIT_CRD 0xd020c
124 /* [RW 3] The weight of the QM (primary) input in the WRR mechanism. 0
125 stands for weight 8 (the most prioritised); 1 stands for weight 1(least
126 prioritised); 2 stands for weight 2; tc. */
127 #define CCM_REG_CQM_P_WEIGHT 0xd00b8
128 /* [RW 1] Input SDM Interface enable. If 0 - the valid input is disregarded;
129 acknowledge output is deasserted; all other signals are treated as usual;
130 if 1 - normal activity. */
131 #define CCM_REG_CSDM_IFEN 0xd0018
132 /* [RC 1] Set when the message length mismatch (relative to last indication)
133 at the SDM interface is detected. */
134 #define CCM_REG_CSDM_LENGTH_MIS 0xd0170
135 /* [RW 28] The CM header for QM formatting in case of an error in the QM
137 #define CCM_REG_ERR_CCM_HDR 0xd0094
138 /* [RW 8] The Event ID in case the input message ErrorFlg is set. */
139 #define CCM_REG_ERR_EVNT_ID 0xd0098
140 /* [RW 8] FIC0 output initial credit. Max credit available - 255. Write
141 writes the initial credit value; read returns the current value of the
142 credit counter. Must be initialized to 64 at start-up. */
143 #define CCM_REG_FIC0_INIT_CRD 0xd0210
144 /* [RW 8] FIC1 output initial credit. Max credit available - 255.Write
145 writes the initial credit value; read returns the current value of the
146 credit counter. Must be initialized to 64 at start-up. */
147 #define CCM_REG_FIC1_INIT_CRD 0xd0214
148 /* [RW 1] Arbitration between Input Arbiter groups: 0 - fair Round-Robin; 1
149 - strict priority defined by ~ccm_registers_gr_ag_pr.gr_ag_pr;
150 ~ccm_registers_gr_ld0_pr.gr_ld0_pr and
151 ~ccm_registers_gr_ld1_pr.gr_ld1_pr. Groups are according to channels and
152 outputs to STORM: aggregation; load FIC0; load FIC1 and store. */
153 #define CCM_REG_GR_ARB_TYPE 0xd015c
154 /* [RW 2] Load (FIC0) channel group priority. The lowest priority is 0; the
155 highest priority is 3. It is supposed; that the Store channel priority is
156 the compliment to 4 of the rest priorities - Aggregation channel; Load
157 (FIC0) channel and Load (FIC1). */
158 #define CCM_REG_GR_LD0_PR 0xd0164
159 /* [RW 2] Load (FIC1) channel group priority. The lowest priority is 0; the
160 highest priority is 3. It is supposed; that the Store channel priority is
161 the compliment to 4 of the rest priorities - Aggregation channel; Load
162 (FIC0) channel and Load (FIC1). */
163 #define CCM_REG_GR_LD1_PR 0xd0168
164 /* [RW 2] General flags index. */
165 #define CCM_REG_INV_DONE_Q 0xd0108
166 /* [RW 4] The number of double REG-pairs(128 bits); loaded from the STORM
167 context and sent to STORM; for a specific connection type. The double
168 REG-pairs are used in order to align to STORM context row size of 128
169 bits. The offset of these data in the STORM context is always 0. Index
170 _(0..15) stands for the connection type (one of 16). */
171 #define CCM_REG_N_SM_CTX_LD_0 0xd004c
172 #define CCM_REG_N_SM_CTX_LD_1 0xd0050
173 #define CCM_REG_N_SM_CTX_LD_10 0xd0074
174 #define CCM_REG_N_SM_CTX_LD_11 0xd0078
175 #define CCM_REG_N_SM_CTX_LD_12 0xd007c
176 #define CCM_REG_N_SM_CTX_LD_13 0xd0080
177 #define CCM_REG_N_SM_CTX_LD_14 0xd0084
178 #define CCM_REG_N_SM_CTX_LD_15 0xd0088
179 #define CCM_REG_N_SM_CTX_LD_2 0xd0054
180 #define CCM_REG_N_SM_CTX_LD_3 0xd0058
181 #define CCM_REG_N_SM_CTX_LD_4 0xd005c
182 /* [RW 1] Input pbf Interface enable. If 0 - the valid input is disregarded;
183 acknowledge output is deasserted; all other signals are treated as usual;
184 if 1 - normal activity. */
185 #define CCM_REG_PBF_IFEN 0xd0028
186 /* [RC 1] Set when the message length mismatch (relative to last indication)
187 at the pbf interface is detected. */
188 #define CCM_REG_PBF_LENGTH_MIS 0xd0180
189 /* [RW 3] The weight of the input pbf in the WRR mechanism. 0 stands for
190 weight 8 (the most prioritised); 1 stands for weight 1(least
191 prioritised); 2 stands for weight 2; tc. */
192 #define CCM_REG_PBF_WEIGHT 0xd00ac
193 #define CCM_REG_PHYS_QNUM1_0 0xd0134
194 #define CCM_REG_PHYS_QNUM1_1 0xd0138
195 #define CCM_REG_PHYS_QNUM2_0 0xd013c
196 #define CCM_REG_PHYS_QNUM2_1 0xd0140
197 #define CCM_REG_PHYS_QNUM3_0 0xd0144
198 #define CCM_REG_PHYS_QNUM3_1 0xd0148
199 #define CCM_REG_QOS_PHYS_QNUM0_0 0xd0114
200 #define CCM_REG_QOS_PHYS_QNUM0_1 0xd0118
201 #define CCM_REG_QOS_PHYS_QNUM1_0 0xd011c
202 #define CCM_REG_QOS_PHYS_QNUM1_1 0xd0120
203 #define CCM_REG_QOS_PHYS_QNUM2_0 0xd0124
204 #define CCM_REG_QOS_PHYS_QNUM2_1 0xd0128
205 #define CCM_REG_QOS_PHYS_QNUM3_0 0xd012c
206 #define CCM_REG_QOS_PHYS_QNUM3_1 0xd0130
207 /* [RW 1] STORM - CM Interface enable. If 0 - the valid input is
208 disregarded; acknowledge output is deasserted; all other signals are
209 treated as usual; if 1 - normal activity. */
210 #define CCM_REG_STORM_CCM_IFEN 0xd0010
211 /* [RC 1] Set when the message length mismatch (relative to last indication)
212 at the STORM interface is detected. */
213 #define CCM_REG_STORM_LENGTH_MIS 0xd016c
214 /* [RW 1] Input tsem Interface enable. If 0 - the valid input is
215 disregarded; acknowledge output is deasserted; all other signals are
216 treated as usual; if 1 - normal activity. */
217 #define CCM_REG_TSEM_IFEN 0xd001c
218 /* [RC 1] Set when the message length mismatch (relative to last indication)
219 at the tsem interface is detected. */
220 #define CCM_REG_TSEM_LENGTH_MIS 0xd0174
221 /* [RW 3] The weight of the input tsem in the WRR mechanism. 0 stands for
222 weight 8 (the most prioritised); 1 stands for weight 1(least
223 prioritised); 2 stands for weight 2; tc. */
224 #define CCM_REG_TSEM_WEIGHT 0xd00a0
225 /* [RW 1] Input usem Interface enable. If 0 - the valid input is
226 disregarded; acknowledge output is deasserted; all other signals are
227 treated as usual; if 1 - normal activity. */
228 #define CCM_REG_USEM_IFEN 0xd0024
229 /* [RC 1] Set when message length mismatch (relative to last indication) at
230 the usem interface is detected. */
231 #define CCM_REG_USEM_LENGTH_MIS 0xd017c
232 /* [RW 3] The weight of the input usem in the WRR mechanism. 0 stands for
233 weight 8 (the most prioritised); 1 stands for weight 1(least
234 prioritised); 2 stands for weight 2; tc. */
235 #define CCM_REG_USEM_WEIGHT 0xd00a8
236 /* [RW 1] Input xsem Interface enable. If 0 - the valid input is
237 disregarded; acknowledge output is deasserted; all other signals are
238 treated as usual; if 1 - normal activity. */
239 #define CCM_REG_XSEM_IFEN 0xd0020
240 /* [RC 1] Set when the message length mismatch (relative to last indication)
241 at the xsem interface is detected. */
242 #define CCM_REG_XSEM_LENGTH_MIS 0xd0178
243 /* [RW 3] The weight of the input xsem in the WRR mechanism. 0 stands for
244 weight 8 (the most prioritised); 1 stands for weight 1(least
245 prioritised); 2 stands for weight 2; tc. */
246 #define CCM_REG_XSEM_WEIGHT 0xd00a4
247 /* [RW 19] Indirect access to the descriptor table of the XX protection
248 mechanism. The fields are: [5:0] - message length; [12:6] - message
249 pointer; 18:13] - next pointer. */
250 #define CCM_REG_XX_DESCR_TABLE 0xd0300
251 #define CCM_REG_XX_DESCR_TABLE_SIZE 36
252 /* [R 7] Used to read the value of XX protection Free counter. */
253 #define CCM_REG_XX_FREE 0xd0184
254 /* [RW 6] Initial value for the credit counter; responsible for fulfilling
255 of the Input Stage XX protection buffer by the XX protection pending
256 messages. Max credit available - 127. Write writes the initial credit
257 value; read returns the current value of the credit counter. Must be
258 initialized to maximum XX protected message size - 2 at start-up. */
259 #define CCM_REG_XX_INIT_CRD 0xd0220
260 /* [RW 7] The maximum number of pending messages; which may be stored in XX
261 protection. At read the ~ccm_registers_xx_free.xx_free counter is read.
262 At write comprises the start value of the ~ccm_registers_xx_free.xx_free
264 #define CCM_REG_XX_MSG_NUM 0xd0224
265 /* [RW 8] The Event ID; sent to the STORM in case of XX overflow. */
266 #define CCM_REG_XX_OVFL_EVNT_ID 0xd0044
267 /* [RW 18] Indirect access to the XX table of the XX protection mechanism.
268 The fields are: [5:0] - tail pointer; 11:6] - Link List size; 17:12] -
270 #define CCM_REG_XX_TABLE 0xd0280
271 #define CDU_REG_CDU_CHK_MASK0 0x101000
272 #define CDU_REG_CDU_CHK_MASK1 0x101004
273 #define CDU_REG_CDU_CONTROL0 0x101008
274 #define CDU_REG_CDU_DEBUG 0x101010
275 #define CDU_REG_CDU_GLOBAL_PARAMS 0x101020
276 /* [RW 7] Interrupt mask register #0 read/write */
277 #define CDU_REG_CDU_INT_MASK 0x10103c
278 /* [R 7] Interrupt register #0 read */
279 #define CDU_REG_CDU_INT_STS 0x101030
280 /* [RW 5] Parity mask register #0 read/write */
281 #define CDU_REG_CDU_PRTY_MASK 0x10104c
282 /* [R 5] Parity register #0 read */
283 #define CDU_REG_CDU_PRTY_STS 0x101040
284 /* [RC 32] logging of error data in case of a CDU load error:
285 {expected_cid[15:0]; xpected_type[2:0]; xpected_region[2:0]; ctive_error;
286 ype_error; ctual_active; ctual_compressed_context}; */
287 #define CDU_REG_ERROR_DATA 0x101014
288 /* [WB 216] L1TT ram access. each entry has the following format :
289 {mrege_regions[7:0]; ffset12[5:0]...offset0[5:0];
290 ength12[5:0]...length0[5:0]; d12[3:0]...id0[3:0]} */
291 #define CDU_REG_L1TT 0x101800
292 /* [WB 24] MATT ram access. each entry has the following
293 format:{RegionLength[11:0]; egionOffset[11:0]} */
294 #define CDU_REG_MATT 0x101100
295 /* [RW 1] when this bit is set the CDU operates in e1hmf mode */
296 #define CDU_REG_MF_MODE 0x101050
297 /* [R 1] indication the initializing the activity counter by the hardware
299 #define CFC_REG_AC_INIT_DONE 0x104078
300 /* [RW 13] activity counter ram access */
301 #define CFC_REG_ACTIVITY_COUNTER 0x104400
302 #define CFC_REG_ACTIVITY_COUNTER_SIZE 256
303 /* [R 1] indication the initializing the cams by the hardware was done. */
304 #define CFC_REG_CAM_INIT_DONE 0x10407c
305 /* [RW 2] Interrupt mask register #0 read/write */
306 #define CFC_REG_CFC_INT_MASK 0x104108
307 /* [R 2] Interrupt register #0 read */
308 #define CFC_REG_CFC_INT_STS 0x1040fc
309 /* [RC 2] Interrupt register #0 read clear */
310 #define CFC_REG_CFC_INT_STS_CLR 0x104100
311 /* [RW 4] Parity mask register #0 read/write */
312 #define CFC_REG_CFC_PRTY_MASK 0x104118
313 /* [R 4] Parity register #0 read */
314 #define CFC_REG_CFC_PRTY_STS 0x10410c
315 /* [RW 21] CID cam access (21:1 - Data; alid - 0) */
316 #define CFC_REG_CID_CAM 0x104800
317 #define CFC_REG_CONTROL0 0x104028
318 #define CFC_REG_DEBUG0 0x104050
319 /* [RW 14] indicates per error (in #cfc_registers_cfc_error_vector.cfc_error
320 vector) whether the cfc should be disabled upon it */
321 #define CFC_REG_DISABLE_ON_ERROR 0x104044
322 /* [RC 14] CFC error vector. when the CFC detects an internal error it will
323 set one of these bits. the bit description can be found in CFC
325 #define CFC_REG_ERROR_VECTOR 0x10403c
326 #define CFC_REG_INIT_REG 0x10404c
327 /* [RW 24] {weight_load_client7[2:0] to weight_load_client0[2:0]}. this
328 field allows changing the priorities of the weighted-round-robin arbiter
329 which selects which CFC load client should be served next */
330 #define CFC_REG_LCREQ_WEIGHTS 0x104084
331 /* [RW 16] Link List ram access; data = {prev_lcid; ext_lcid} */
332 #define CFC_REG_LINK_LIST 0x104c00
333 #define CFC_REG_LINK_LIST_SIZE 256
334 /* [R 1] indication the initializing the link list by the hardware was done. */
335 #define CFC_REG_LL_INIT_DONE 0x104074
336 /* [R 9] Number of allocated LCIDs which are at empty state */
337 #define CFC_REG_NUM_LCIDS_ALLOC 0x104020
338 /* [R 9] Number of Arriving LCIDs in Link List Block */
339 #define CFC_REG_NUM_LCIDS_ARRIVING 0x104004
340 /* [R 9] Number of Inside LCIDs in Link List Block */
341 #define CFC_REG_NUM_LCIDS_INSIDE 0x104008
342 /* [R 9] Number of Leaving LCIDs in Link List Block */
343 #define CFC_REG_NUM_LCIDS_LEAVING 0x104018
344 /* [RW 8] The event id for aggregated interrupt 0 */
345 #define CSDM_REG_AGG_INT_EVENT_0 0xc2038
346 #define CSDM_REG_AGG_INT_EVENT_1 0xc203c
347 #define CSDM_REG_AGG_INT_EVENT_10 0xc2060
348 #define CSDM_REG_AGG_INT_EVENT_11 0xc2064
349 #define CSDM_REG_AGG_INT_EVENT_12 0xc2068
350 #define CSDM_REG_AGG_INT_EVENT_13 0xc206c
351 #define CSDM_REG_AGG_INT_EVENT_14 0xc2070
352 #define CSDM_REG_AGG_INT_EVENT_15 0xc2074
353 #define CSDM_REG_AGG_INT_EVENT_16 0xc2078
354 #define CSDM_REG_AGG_INT_EVENT_17 0xc207c
355 #define CSDM_REG_AGG_INT_EVENT_18 0xc2080
356 #define CSDM_REG_AGG_INT_EVENT_19 0xc2084
357 #define CSDM_REG_AGG_INT_EVENT_2 0xc2040
358 #define CSDM_REG_AGG_INT_EVENT_20 0xc2088
359 #define CSDM_REG_AGG_INT_EVENT_21 0xc208c
360 #define CSDM_REG_AGG_INT_EVENT_22 0xc2090
361 #define CSDM_REG_AGG_INT_EVENT_23 0xc2094
362 #define CSDM_REG_AGG_INT_EVENT_24 0xc2098
363 #define CSDM_REG_AGG_INT_EVENT_25 0xc209c
364 #define CSDM_REG_AGG_INT_EVENT_26 0xc20a0
365 #define CSDM_REG_AGG_INT_EVENT_27 0xc20a4
366 #define CSDM_REG_AGG_INT_EVENT_28 0xc20a8
367 #define CSDM_REG_AGG_INT_EVENT_29 0xc20ac
368 #define CSDM_REG_AGG_INT_EVENT_3 0xc2044
369 #define CSDM_REG_AGG_INT_EVENT_30 0xc20b0
370 #define CSDM_REG_AGG_INT_EVENT_31 0xc20b4
371 #define CSDM_REG_AGG_INT_EVENT_4 0xc2048
372 /* [RW 1] The T bit for aggregated interrupt 0 */
373 #define CSDM_REG_AGG_INT_T_0 0xc20b8
374 #define CSDM_REG_AGG_INT_T_1 0xc20bc
375 #define CSDM_REG_AGG_INT_T_10 0xc20e0
376 #define CSDM_REG_AGG_INT_T_11 0xc20e4
377 #define CSDM_REG_AGG_INT_T_12 0xc20e8
378 #define CSDM_REG_AGG_INT_T_13 0xc20ec
379 #define CSDM_REG_AGG_INT_T_14 0xc20f0
380 #define CSDM_REG_AGG_INT_T_15 0xc20f4
381 #define CSDM_REG_AGG_INT_T_16 0xc20f8
382 #define CSDM_REG_AGG_INT_T_17 0xc20fc
383 #define CSDM_REG_AGG_INT_T_18 0xc2100
384 #define CSDM_REG_AGG_INT_T_19 0xc2104
385 /* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */
386 #define CSDM_REG_CFC_RSP_START_ADDR 0xc2008
387 /* [RW 16] The maximum value of the competion counter #0 */
388 #define CSDM_REG_CMP_COUNTER_MAX0 0xc201c
389 /* [RW 16] The maximum value of the competion counter #1 */
390 #define CSDM_REG_CMP_COUNTER_MAX1 0xc2020
391 /* [RW 16] The maximum value of the competion counter #2 */
392 #define CSDM_REG_CMP_COUNTER_MAX2 0xc2024
393 /* [RW 16] The maximum value of the competion counter #3 */
394 #define CSDM_REG_CMP_COUNTER_MAX3 0xc2028
395 /* [RW 13] The start address in the internal RAM for the completion
397 #define CSDM_REG_CMP_COUNTER_START_ADDR 0xc200c
398 /* [RW 32] Interrupt mask register #0 read/write */
399 #define CSDM_REG_CSDM_INT_MASK_0 0xc229c
400 #define CSDM_REG_CSDM_INT_MASK_1 0xc22ac
401 /* [R 32] Interrupt register #0 read */
402 #define CSDM_REG_CSDM_INT_STS_0 0xc2290
403 #define CSDM_REG_CSDM_INT_STS_1 0xc22a0
404 /* [RW 11] Parity mask register #0 read/write */
405 #define CSDM_REG_CSDM_PRTY_MASK 0xc22bc
406 /* [R 11] Parity register #0 read */
407 #define CSDM_REG_CSDM_PRTY_STS 0xc22b0
408 #define CSDM_REG_ENABLE_IN1 0xc2238
409 #define CSDM_REG_ENABLE_IN2 0xc223c
410 #define CSDM_REG_ENABLE_OUT1 0xc2240
411 #define CSDM_REG_ENABLE_OUT2 0xc2244
412 /* [RW 4] The initial number of messages that can be sent to the pxp control
413 interface without receiving any ACK. */
414 #define CSDM_REG_INIT_CREDIT_PXP_CTRL 0xc24bc
415 /* [ST 32] The number of ACK after placement messages received */
416 #define CSDM_REG_NUM_OF_ACK_AFTER_PLACE 0xc227c
417 /* [ST 32] The number of packet end messages received from the parser */
418 #define CSDM_REG_NUM_OF_PKT_END_MSG 0xc2274
419 /* [ST 32] The number of requests received from the pxp async if */
420 #define CSDM_REG_NUM_OF_PXP_ASYNC_REQ 0xc2278
421 /* [ST 32] The number of commands received in queue 0 */
422 #define CSDM_REG_NUM_OF_Q0_CMD 0xc2248
423 /* [ST 32] The number of commands received in queue 10 */
424 #define CSDM_REG_NUM_OF_Q10_CMD 0xc226c
425 /* [ST 32] The number of commands received in queue 11 */
426 #define CSDM_REG_NUM_OF_Q11_CMD 0xc2270
427 /* [ST 32] The number of commands received in queue 1 */
428 #define CSDM_REG_NUM_OF_Q1_CMD 0xc224c
429 /* [ST 32] The number of commands received in queue 3 */
430 #define CSDM_REG_NUM_OF_Q3_CMD 0xc2250
431 /* [ST 32] The number of commands received in queue 4 */
432 #define CSDM_REG_NUM_OF_Q4_CMD 0xc2254
433 /* [ST 32] The number of commands received in queue 5 */
434 #define CSDM_REG_NUM_OF_Q5_CMD 0xc2258
435 /* [ST 32] The number of commands received in queue 6 */
436 #define CSDM_REG_NUM_OF_Q6_CMD 0xc225c
437 /* [ST 32] The number of commands received in queue 7 */
438 #define CSDM_REG_NUM_OF_Q7_CMD 0xc2260
439 /* [ST 32] The number of commands received in queue 8 */
440 #define CSDM_REG_NUM_OF_Q8_CMD 0xc2264
441 /* [ST 32] The number of commands received in queue 9 */
442 #define CSDM_REG_NUM_OF_Q9_CMD 0xc2268
443 /* [RW 13] The start address in the internal RAM for queue counters */
444 #define CSDM_REG_Q_COUNTER_START_ADDR 0xc2010
445 /* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */
446 #define CSDM_REG_RSP_PXP_CTRL_RDATA_EMPTY 0xc2548
447 /* [R 1] parser fifo empty in sdm_sync block */
448 #define CSDM_REG_SYNC_PARSER_EMPTY 0xc2550
449 /* [R 1] parser serial fifo empty in sdm_sync block */
450 #define CSDM_REG_SYNC_SYNC_EMPTY 0xc2558
451 /* [RW 32] Tick for timer counter. Applicable only when
452 ~csdm_registers_timer_tick_enable.timer_tick_enable =1 */
453 #define CSDM_REG_TIMER_TICK 0xc2000
454 /* [RW 5] The number of time_slots in the arbitration cycle */
455 #define CSEM_REG_ARB_CYCLE_SIZE 0x200034
456 /* [RW 3] The source that is associated with arbitration element 0. Source
457 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
458 sleeping thread with priority 1; 4- sleeping thread with priority 2 */
459 #define CSEM_REG_ARB_ELEMENT0 0x200020
460 /* [RW 3] The source that is associated with arbitration element 1. Source
461 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
462 sleeping thread with priority 1; 4- sleeping thread with priority 2.
463 Could not be equal to register ~csem_registers_arb_element0.arb_element0 */
464 #define CSEM_REG_ARB_ELEMENT1 0x200024
465 /* [RW 3] The source that is associated with arbitration element 2. Source
466 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
467 sleeping thread with priority 1; 4- sleeping thread with priority 2.
468 Could not be equal to register ~csem_registers_arb_element0.arb_element0
469 and ~csem_registers_arb_element1.arb_element1 */
470 #define CSEM_REG_ARB_ELEMENT2 0x200028
471 /* [RW 3] The source that is associated with arbitration element 3. Source
472 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
473 sleeping thread with priority 1; 4- sleeping thread with priority 2.Could
474 not be equal to register ~csem_registers_arb_element0.arb_element0 and
475 ~csem_registers_arb_element1.arb_element1 and
476 ~csem_registers_arb_element2.arb_element2 */
477 #define CSEM_REG_ARB_ELEMENT3 0x20002c
478 /* [RW 3] The source that is associated with arbitration element 4. Source
479 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
480 sleeping thread with priority 1; 4- sleeping thread with priority 2.
481 Could not be equal to register ~csem_registers_arb_element0.arb_element0
482 and ~csem_registers_arb_element1.arb_element1 and
483 ~csem_registers_arb_element2.arb_element2 and
484 ~csem_registers_arb_element3.arb_element3 */
485 #define CSEM_REG_ARB_ELEMENT4 0x200030
486 /* [RW 32] Interrupt mask register #0 read/write */
487 #define CSEM_REG_CSEM_INT_MASK_0 0x200110
488 #define CSEM_REG_CSEM_INT_MASK_1 0x200120
489 /* [R 32] Interrupt register #0 read */
490 #define CSEM_REG_CSEM_INT_STS_0 0x200104
491 #define CSEM_REG_CSEM_INT_STS_1 0x200114
492 /* [RW 32] Parity mask register #0 read/write */
493 #define CSEM_REG_CSEM_PRTY_MASK_0 0x200130
494 #define CSEM_REG_CSEM_PRTY_MASK_1 0x200140
495 /* [R 32] Parity register #0 read */
496 #define CSEM_REG_CSEM_PRTY_STS_0 0x200124
497 #define CSEM_REG_CSEM_PRTY_STS_1 0x200134
498 #define CSEM_REG_ENABLE_IN 0x2000a4
499 #define CSEM_REG_ENABLE_OUT 0x2000a8
500 /* [RW 32] This address space contains all registers and memories that are
501 placed in SEM_FAST block. The SEM_FAST registers are described in
502 appendix B. In order to access the sem_fast registers the base address
503 ~fast_memory.fast_memory should be added to eachsem_fast register offset. */
504 #define CSEM_REG_FAST_MEMORY 0x220000
505 /* [RW 1] Disables input messages from FIC0 May be updated during run_time
507 #define CSEM_REG_FIC0_DISABLE 0x200224
508 /* [RW 1] Disables input messages from FIC1 May be updated during run_time
510 #define CSEM_REG_FIC1_DISABLE 0x200234
511 /* [RW 15] Interrupt table Read and write access to it is not possible in
512 the middle of the work */
513 #define CSEM_REG_INT_TABLE 0x200400
514 /* [ST 24] Statistics register. The number of messages that entered through
516 #define CSEM_REG_MSG_NUM_FIC0 0x200000
517 /* [ST 24] Statistics register. The number of messages that entered through
519 #define CSEM_REG_MSG_NUM_FIC1 0x200004
520 /* [ST 24] Statistics register. The number of messages that were sent to
522 #define CSEM_REG_MSG_NUM_FOC0 0x200008
523 /* [ST 24] Statistics register. The number of messages that were sent to
525 #define CSEM_REG_MSG_NUM_FOC1 0x20000c
526 /* [ST 24] Statistics register. The number of messages that were sent to
528 #define CSEM_REG_MSG_NUM_FOC2 0x200010
529 /* [ST 24] Statistics register. The number of messages that were sent to
531 #define CSEM_REG_MSG_NUM_FOC3 0x200014
532 /* [RW 1] Disables input messages from the passive buffer May be updated
533 during run_time by the microcode */
534 #define CSEM_REG_PAS_DISABLE 0x20024c
535 /* [WB 128] Debug only. Passive buffer memory */
536 #define CSEM_REG_PASSIVE_BUFFER 0x202000
537 /* [WB 46] pram memory. B45 is parity; b[44:0] - data. */
538 #define CSEM_REG_PRAM 0x240000
539 /* [R 16] Valid sleeping threads indication have bit per thread */
540 #define CSEM_REG_SLEEP_THREADS_VALID 0x20026c
541 /* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */
542 #define CSEM_REG_SLOW_EXT_STORE_EMPTY 0x2002a0
543 /* [RW 16] List of free threads . There is a bit per thread. */
544 #define CSEM_REG_THREADS_LIST 0x2002e4
545 /* [RW 3] The arbitration scheme of time_slot 0 */
546 #define CSEM_REG_TS_0_AS 0x200038
547 /* [RW 3] The arbitration scheme of time_slot 10 */
548 #define CSEM_REG_TS_10_AS 0x200060
549 /* [RW 3] The arbitration scheme of time_slot 11 */
550 #define CSEM_REG_TS_11_AS 0x200064
551 /* [RW 3] The arbitration scheme of time_slot 12 */
552 #define CSEM_REG_TS_12_AS 0x200068
553 /* [RW 3] The arbitration scheme of time_slot 13 */
554 #define CSEM_REG_TS_13_AS 0x20006c
555 /* [RW 3] The arbitration scheme of time_slot 14 */
556 #define CSEM_REG_TS_14_AS 0x200070
557 /* [RW 3] The arbitration scheme of time_slot 15 */
558 #define CSEM_REG_TS_15_AS 0x200074
559 /* [RW 3] The arbitration scheme of time_slot 16 */
560 #define CSEM_REG_TS_16_AS 0x200078
561 /* [RW 3] The arbitration scheme of time_slot 17 */
562 #define CSEM_REG_TS_17_AS 0x20007c
563 /* [RW 3] The arbitration scheme of time_slot 18 */
564 #define CSEM_REG_TS_18_AS 0x200080
565 /* [RW 3] The arbitration scheme of time_slot 1 */
566 #define CSEM_REG_TS_1_AS 0x20003c
567 /* [RW 3] The arbitration scheme of time_slot 2 */
568 #define CSEM_REG_TS_2_AS 0x200040
569 /* [RW 3] The arbitration scheme of time_slot 3 */
570 #define CSEM_REG_TS_3_AS 0x200044
571 /* [RW 3] The arbitration scheme of time_slot 4 */
572 #define CSEM_REG_TS_4_AS 0x200048
573 /* [RW 3] The arbitration scheme of time_slot 5 */
574 #define CSEM_REG_TS_5_AS 0x20004c
575 /* [RW 3] The arbitration scheme of time_slot 6 */
576 #define CSEM_REG_TS_6_AS 0x200050
577 /* [RW 3] The arbitration scheme of time_slot 7 */
578 #define CSEM_REG_TS_7_AS 0x200054
579 /* [RW 3] The arbitration scheme of time_slot 8 */
580 #define CSEM_REG_TS_8_AS 0x200058
581 /* [RW 3] The arbitration scheme of time_slot 9 */
582 #define CSEM_REG_TS_9_AS 0x20005c
583 /* [RW 1] Parity mask register #0 read/write */
584 #define DBG_REG_DBG_PRTY_MASK 0xc0a8
585 /* [R 1] Parity register #0 read */
586 #define DBG_REG_DBG_PRTY_STS 0xc09c
587 /* [RW 32] Commands memory. The address to command X; row Y is to calculated
589 #define DMAE_REG_CMD_MEM 0x102400
590 #define DMAE_REG_CMD_MEM_SIZE 224
591 /* [RW 1] If 0 - the CRC-16c initial value is all zeroes; if 1 - the CRC-16c
592 initial value is all ones. */
593 #define DMAE_REG_CRC16C_INIT 0x10201c
594 /* [RW 1] If 0 - the CRC-16 T10 initial value is all zeroes; if 1 - the
595 CRC-16 T10 initial value is all ones. */
596 #define DMAE_REG_CRC16T10_INIT 0x102020
597 /* [RW 2] Interrupt mask register #0 read/write */
598 #define DMAE_REG_DMAE_INT_MASK 0x102054
599 /* [RW 4] Parity mask register #0 read/write */
600 #define DMAE_REG_DMAE_PRTY_MASK 0x102064
601 /* [R 4] Parity register #0 read */
602 #define DMAE_REG_DMAE_PRTY_STS 0x102058
603 /* [RW 1] Command 0 go. */
604 #define DMAE_REG_GO_C0 0x102080
605 /* [RW 1] Command 1 go. */
606 #define DMAE_REG_GO_C1 0x102084
607 /* [RW 1] Command 10 go. */
608 #define DMAE_REG_GO_C10 0x102088
609 #define DMAE_REG_GO_C10_SIZE 1
610 /* [RW 1] Command 11 go. */
611 #define DMAE_REG_GO_C11 0x10208c
612 #define DMAE_REG_GO_C11_SIZE 1
613 /* [RW 1] Command 12 go. */
614 #define DMAE_REG_GO_C12 0x102090
615 #define DMAE_REG_GO_C12_SIZE 1
616 /* [RW 1] Command 13 go. */
617 #define DMAE_REG_GO_C13 0x102094
618 #define DMAE_REG_GO_C13_SIZE 1
619 /* [RW 1] Command 14 go. */
620 #define DMAE_REG_GO_C14 0x102098
621 #define DMAE_REG_GO_C14_SIZE 1
622 /* [RW 1] Command 15 go. */
623 #define DMAE_REG_GO_C15 0x10209c
624 #define DMAE_REG_GO_C15_SIZE 1
625 /* [RW 1] Command 10 go. */
626 #define DMAE_REG_GO_C10 0x102088
627 /* [RW 1] Command 11 go. */
628 #define DMAE_REG_GO_C11 0x10208c
629 /* [RW 1] Command 12 go. */
630 #define DMAE_REG_GO_C12 0x102090
631 /* [RW 1] Command 13 go. */
632 #define DMAE_REG_GO_C13 0x102094
633 /* [RW 1] Command 14 go. */
634 #define DMAE_REG_GO_C14 0x102098
635 /* [RW 1] Command 15 go. */
636 #define DMAE_REG_GO_C15 0x10209c
637 /* [RW 1] Command 2 go. */
638 #define DMAE_REG_GO_C2 0x1020a0
639 /* [RW 1] Command 3 go. */
640 #define DMAE_REG_GO_C3 0x1020a4
641 /* [RW 1] Command 4 go. */
642 #define DMAE_REG_GO_C4 0x1020a8
643 /* [RW 1] Command 5 go. */
644 #define DMAE_REG_GO_C5 0x1020ac
645 /* [RW 1] Command 6 go. */
646 #define DMAE_REG_GO_C6 0x1020b0
647 /* [RW 1] Command 7 go. */
648 #define DMAE_REG_GO_C7 0x1020b4
649 /* [RW 1] Command 8 go. */
650 #define DMAE_REG_GO_C8 0x1020b8
651 /* [RW 1] Command 9 go. */
652 #define DMAE_REG_GO_C9 0x1020bc
653 /* [RW 1] DMAE GRC Interface (Target; aster) enable. If 0 - the acknowledge
654 input is disregarded; valid is deasserted; all other signals are treated
655 as usual; if 1 - normal activity. */
656 #define DMAE_REG_GRC_IFEN 0x102008
657 /* [RW 1] DMAE PCI Interface (Request; ead; rite) enable. If 0 - the
658 acknowledge input is disregarded; valid is deasserted; full is asserted;
659 all other signals are treated as usual; if 1 - normal activity. */
660 #define DMAE_REG_PCI_IFEN 0x102004
661 /* [RW 4] DMAE- PCI Request Interface initial credit. Write writes the
662 initial value to the credit counter; related to the address. Read returns
663 the current value of the counter. */
664 #define DMAE_REG_PXP_REQ_INIT_CRD 0x1020c0
665 /* [RW 8] Aggregation command. */
666 #define DORQ_REG_AGG_CMD0 0x170060
667 /* [RW 8] Aggregation command. */
668 #define DORQ_REG_AGG_CMD1 0x170064
669 /* [RW 8] Aggregation command. */
670 #define DORQ_REG_AGG_CMD2 0x170068
671 /* [RW 8] Aggregation command. */
672 #define DORQ_REG_AGG_CMD3 0x17006c
673 /* [RW 28] UCM Header. */
674 #define DORQ_REG_CMHEAD_RX 0x170050
675 /* [RW 32] Doorbell address for RBC doorbells (function 0). */
676 #define DORQ_REG_DB_ADDR0 0x17008c
677 /* [RW 5] Interrupt mask register #0 read/write */
678 #define DORQ_REG_DORQ_INT_MASK 0x170180
679 /* [R 5] Interrupt register #0 read */
680 #define DORQ_REG_DORQ_INT_STS 0x170174
681 /* [RC 5] Interrupt register #0 read clear */
682 #define DORQ_REG_DORQ_INT_STS_CLR 0x170178
683 /* [RW 2] Parity mask register #0 read/write */
684 #define DORQ_REG_DORQ_PRTY_MASK 0x170190
685 /* [R 2] Parity register #0 read */
686 #define DORQ_REG_DORQ_PRTY_STS 0x170184
687 /* [RW 8] The address to write the DPM CID to STORM. */
688 #define DORQ_REG_DPM_CID_ADDR 0x170044
689 /* [RW 5] The DPM mode CID extraction offset. */
690 #define DORQ_REG_DPM_CID_OFST 0x170030
691 /* [RW 12] The threshold of the DQ FIFO to send the almost full interrupt. */
692 #define DORQ_REG_DQ_FIFO_AFULL_TH 0x17007c
693 /* [RW 12] The threshold of the DQ FIFO to send the full interrupt. */
694 #define DORQ_REG_DQ_FIFO_FULL_TH 0x170078
695 /* [R 13] Current value of the DQ FIFO fill level according to following
696 pointer. The range is 0 - 256 FIFO rows; where each row stands for the
698 #define DORQ_REG_DQ_FILL_LVLF 0x1700a4
699 /* [R 1] DQ FIFO full status. Is set; when FIFO filling level is more or
700 equal to full threshold; reset on full clear. */
701 #define DORQ_REG_DQ_FULL_ST 0x1700c0
702 /* [RW 28] The value sent to CM header in the case of CFC load error. */
703 #define DORQ_REG_ERR_CMHEAD 0x170058
704 #define DORQ_REG_IF_EN 0x170004
705 #define DORQ_REG_MODE_ACT 0x170008
706 /* [RW 5] The normal mode CID extraction offset. */
707 #define DORQ_REG_NORM_CID_OFST 0x17002c
708 /* [RW 28] TCM Header when only TCP context is loaded. */
709 #define DORQ_REG_NORM_CMHEAD_TX 0x17004c
710 /* [RW 3] The number of simultaneous outstanding requests to Context Fetch
712 #define DORQ_REG_OUTST_REQ 0x17003c
713 #define DORQ_REG_REGN 0x170038
714 /* [R 4] Current value of response A counter credit. Initial credit is
715 configured through write to ~dorq_registers_rsp_init_crd.rsp_init_crd
717 #define DORQ_REG_RSPA_CRD_CNT 0x1700ac
718 /* [R 4] Current value of response B counter credit. Initial credit is
719 configured through write to ~dorq_registers_rsp_init_crd.rsp_init_crd
721 #define DORQ_REG_RSPB_CRD_CNT 0x1700b0
722 /* [RW 4] The initial credit at the Doorbell Response Interface. The write
723 writes the same initial credit to the rspa_crd_cnt and rspb_crd_cnt. The
724 read reads this written value. */
725 #define DORQ_REG_RSP_INIT_CRD 0x170048
726 /* [RW 4] Initial activity counter value on the load request; when the
728 #define DORQ_REG_SHRT_ACT_CNT 0x170070
729 /* [RW 28] TCM Header when both ULP and TCP context is loaded. */
730 #define DORQ_REG_SHRT_CMHEAD 0x170054
731 #define HC_CONFIG_0_REG_ATTN_BIT_EN_0 (0x1<<4)
732 #define HC_CONFIG_0_REG_INT_LINE_EN_0 (0x1<<3)
733 #define HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 (0x1<<2)
734 #define HC_CONFIG_0_REG_SINGLE_ISR_EN_0 (0x1<<1)
735 #define HC_REG_AGG_INT_0 0x108050
736 #define HC_REG_AGG_INT_1 0x108054
737 #define HC_REG_ATTN_BIT 0x108120
738 #define HC_REG_ATTN_IDX 0x108100
739 #define HC_REG_ATTN_MSG0_ADDR_L 0x108018
740 #define HC_REG_ATTN_MSG1_ADDR_L 0x108020
741 #define HC_REG_ATTN_NUM_P0 0x108038
742 #define HC_REG_ATTN_NUM_P1 0x10803c
743 #define HC_REG_CONFIG_0 0x108000
744 #define HC_REG_CONFIG_1 0x108004
745 #define HC_REG_FUNC_NUM_P0 0x1080ac
746 #define HC_REG_FUNC_NUM_P1 0x1080b0
747 /* [RW 3] Parity mask register #0 read/write */
748 #define HC_REG_HC_PRTY_MASK 0x1080a0
749 /* [R 3] Parity register #0 read */
750 #define HC_REG_HC_PRTY_STS 0x108094
751 #define HC_REG_INT_MASK 0x108108
752 #define HC_REG_LEADING_EDGE_0 0x108040
753 #define HC_REG_LEADING_EDGE_1 0x108048
754 #define HC_REG_P0_PROD_CONS 0x108200
755 #define HC_REG_P1_PROD_CONS 0x108400
756 #define HC_REG_PBA_COMMAND 0x108140
757 #define HC_REG_PCI_CONFIG_0 0x108010
758 #define HC_REG_PCI_CONFIG_1 0x108014
759 #define HC_REG_STATISTIC_COUNTERS 0x109000
760 #define HC_REG_TRAILING_EDGE_0 0x108044
761 #define HC_REG_TRAILING_EDGE_1 0x10804c
762 #define HC_REG_UC_RAM_ADDR_0 0x108028
763 #define HC_REG_UC_RAM_ADDR_1 0x108030
764 #define HC_REG_USTORM_ADDR_FOR_COALESCE 0x108068
765 #define HC_REG_VQID_0 0x108008
766 #define HC_REG_VQID_1 0x10800c
767 #define MCP_REG_MCPR_NVM_ACCESS_ENABLE 0x86424
768 #define MCP_REG_MCPR_NVM_ADDR 0x8640c
769 #define MCP_REG_MCPR_NVM_CFG4 0x8642c
770 #define MCP_REG_MCPR_NVM_COMMAND 0x86400
771 #define MCP_REG_MCPR_NVM_READ 0x86410
772 #define MCP_REG_MCPR_NVM_SW_ARB 0x86420
773 #define MCP_REG_MCPR_NVM_WRITE 0x86408
774 #define MCP_REG_MCPR_NVM_WRITE1 0x86428
775 #define MCP_REG_MCPR_SCRATCH 0xa0000
776 /* [R 32] read first 32 bit after inversion of function 0. mapped as
777 follows: [0] NIG attention for function0; [1] NIG attention for
778 function1; [2] GPIO1 mcp; [3] GPIO2 mcp; [4] GPIO3 mcp; [5] GPIO4 mcp;
779 [6] GPIO1 function 1; [7] GPIO2 function 1; [8] GPIO3 function 1; [9]
780 GPIO4 function 1; [10] PCIE glue/PXP VPD event function0; [11] PCIE
781 glue/PXP VPD event function1; [12] PCIE glue/PXP Expansion ROM event0;
782 [13] PCIE glue/PXP Expansion ROM event1; [14] SPIO4; [15] SPIO5; [16]
783 MSI/X indication for mcp; [17] MSI/X indication for function 1; [18] BRB
784 Parity error; [19] BRB Hw interrupt; [20] PRS Parity error; [21] PRS Hw
785 interrupt; [22] SRC Parity error; [23] SRC Hw interrupt; [24] TSDM Parity
786 error; [25] TSDM Hw interrupt; [26] TCM Parity error; [27] TCM Hw
787 interrupt; [28] TSEMI Parity error; [29] TSEMI Hw interrupt; [30] PBF
788 Parity error; [31] PBF Hw interrupt; */
789 #define MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 0xa42c
790 #define MISC_REG_AEU_AFTER_INVERT_1_FUNC_1 0xa430
791 /* [R 32] read first 32 bit after inversion of mcp. mapped as follows: [0]
792 NIG attention for function0; [1] NIG attention for function1; [2] GPIO1
793 mcp; [3] GPIO2 mcp; [4] GPIO3 mcp; [5] GPIO4 mcp; [6] GPIO1 function 1;
794 [7] GPIO2 function 1; [8] GPIO3 function 1; [9] GPIO4 function 1; [10]
795 PCIE glue/PXP VPD event function0; [11] PCIE glue/PXP VPD event
796 function1; [12] PCIE glue/PXP Expansion ROM event0; [13] PCIE glue/PXP
797 Expansion ROM event1; [14] SPIO4; [15] SPIO5; [16] MSI/X indication for
798 mcp; [17] MSI/X indication for function 1; [18] BRB Parity error; [19]
799 BRB Hw interrupt; [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC
800 Parity error; [23] SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw
801 interrupt; [26] TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI
802 Parity error; [29] TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw
804 #define MISC_REG_AEU_AFTER_INVERT_1_MCP 0xa434
805 /* [R 32] read second 32 bit after inversion of function 0. mapped as
806 follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM
807 Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw
808 interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity
809 error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw
810 interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14]
811 NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error;
812 [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw
813 interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM
814 Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI
815 Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM
816 Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw
818 #define MISC_REG_AEU_AFTER_INVERT_2_FUNC_0 0xa438
819 #define MISC_REG_AEU_AFTER_INVERT_2_FUNC_1 0xa43c
820 /* [R 32] read second 32 bit after inversion of mcp. mapped as follows: [0]
821 PBClient Parity error; [1] PBClient Hw interrupt; [2] QM Parity error;
822 [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw interrupt;
823 [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity error; [9]
824 XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw interrupt; [12]
825 DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14] NIG Parity
826 error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error; [17] Vaux
827 PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw interrupt;
828 [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM Parity error;
829 [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI Hw interrupt;
830 [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM Parity error;
831 [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw interrupt; */
832 #define MISC_REG_AEU_AFTER_INVERT_2_MCP 0xa440
833 /* [R 32] read third 32 bit after inversion of function 0. mapped as
834 follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP Parity
835 error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error; [5]
836 PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw
837 interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity
838 error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC)
839 Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16]
840 pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20]
841 MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23]
842 SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW
843 timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3
844 func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General
846 #define MISC_REG_AEU_AFTER_INVERT_3_FUNC_0 0xa444
847 #define MISC_REG_AEU_AFTER_INVERT_3_FUNC_1 0xa448
848 /* [R 32] read third 32 bit after inversion of mcp. mapped as follows: [0]
849 CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP Parity error; [3] PXP
850 Hw interrupt; [4] PXPpciClockClient Parity error; [5] PXPpciClockClient
851 Hw interrupt; [6] CFC Parity error; [7] CFC Hw interrupt; [8] CDU Parity
852 error; [9] CDU Hw interrupt; [10] DMAE Parity error; [11] DMAE Hw
853 interrupt; [12] IGU (HC) Parity error; [13] IGU (HC) Hw interrupt; [14]
854 MISC Parity error; [15] MISC Hw interrupt; [16] pxp_misc_mps_attn; [17]
855 Flash event; [18] SMB event; [19] MCP attn0; [20] MCP attn1; [21] SW
856 timers attn_1 func0; [22] SW timers attn_2 func0; [23] SW timers attn_3
857 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW timers attn_1
858 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3 func1; [29] SW
859 timers attn_4 func1; [30] General attn0; [31] General attn1; */
860 #define MISC_REG_AEU_AFTER_INVERT_3_MCP 0xa44c
861 /* [R 32] read fourth 32 bit after inversion of function 0. mapped as
862 follows: [0] General attn2; [1] General attn3; [2] General attn4; [3]
863 General attn5; [4] General attn6; [5] General attn7; [6] General attn8;
864 [7] General attn9; [8] General attn10; [9] General attn11; [10] General
865 attn12; [11] General attn13; [12] General attn14; [13] General attn15;
866 [14] General attn16; [15] General attn17; [16] General attn18; [17]
867 General attn19; [18] General attn20; [19] General attn21; [20] Main power
868 interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN
869 Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC
870 Latched timeout attention; [27] GRC Latched reserved access attention;
871 [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP
872 Latched ump_tx_parity; [31] MCP Latched scpad_parity; */
873 #define MISC_REG_AEU_AFTER_INVERT_4_FUNC_0 0xa450
874 #define MISC_REG_AEU_AFTER_INVERT_4_FUNC_1 0xa454
875 /* [R 32] read fourth 32 bit after inversion of mcp. mapped as follows: [0]
876 General attn2; [1] General attn3; [2] General attn4; [3] General attn5;
877 [4] General attn6; [5] General attn7; [6] General attn8; [7] General
878 attn9; [8] General attn10; [9] General attn11; [10] General attn12; [11]
879 General attn13; [12] General attn14; [13] General attn15; [14] General
880 attn16; [15] General attn17; [16] General attn18; [17] General attn19;
881 [18] General attn20; [19] General attn21; [20] Main power interrupt; [21]
882 RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN Latched attn; [24]
883 RBCU Latched attn; [25] RBCP Latched attn; [26] GRC Latched timeout
884 attention; [27] GRC Latched reserved access attention; [28] MCP Latched
885 rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP Latched
886 ump_tx_parity; [31] MCP Latched scpad_parity; */
887 #define MISC_REG_AEU_AFTER_INVERT_4_MCP 0xa458
888 /* [W 14] write to this register results with the clear of the latched
889 signals; one in d0 clears RBCR latch; one in d1 clears RBCT latch; one in
890 d2 clears RBCN latch; one in d3 clears RBCU latch; one in d4 clears RBCP
891 latch; one in d5 clears GRC Latched timeout attention; one in d6 clears
892 GRC Latched reserved access attention; one in d7 clears Latched
893 rom_parity; one in d8 clears Latched ump_rx_parity; one in d9 clears
894 Latched ump_tx_parity; one in d10 clears Latched scpad_parity (both
895 ports); one in d11 clears pxpv_misc_mps_attn; one in d12 clears
896 pxp_misc_exp_rom_attn0; one in d13 clears pxp_misc_exp_rom_attn1; read
897 from this register return zero */
898 #define MISC_REG_AEU_CLR_LATCH_SIGNAL 0xa45c
899 /* [RW 32] first 32b for enabling the output for function 0 output0. mapped
900 as follows: [0] NIG attention for function0; [1] NIG attention for
901 function1; [2] GPIO1 function 0; [3] GPIO2 function 0; [4] GPIO3 function
902 0; [5] GPIO4 function 0; [6] GPIO1 function 1; [7] GPIO2 function 1; [8]
903 GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event
904 function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP
905 Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14]
906 SPIO4; [15] SPIO5; [16] MSI/X indication for function 0; [17] MSI/X
907 indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt;
908 [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23]
909 SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26]
910 TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29]
911 TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */
912 #define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0 0xa06c
913 #define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_1 0xa07c
914 #define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_2 0xa08c
915 #define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_3 0xa09c
916 #define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_5 0xa0bc
917 #define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_6 0xa0cc
918 #define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_7 0xa0dc
919 /* [RW 32] first 32b for enabling the output for function 1 output0. mapped
920 as follows: [0] NIG attention for function0; [1] NIG attention for
921 function1; [2] GPIO1 function 1; [3] GPIO2 function 1; [4] GPIO3 function
922 1; [5] GPIO4 function 1; [6] GPIO1 function 1; [7] GPIO2 function 1; [8]
923 GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event
924 function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP
925 Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14]
926 SPIO4; [15] SPIO5; [16] MSI/X indication for function 1; [17] MSI/X
927 indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt;
928 [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23]
929 SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26]
930 TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29]
931 TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */
932 #define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 0xa10c
933 #define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_1 0xa11c
934 #define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_2 0xa12c
935 #define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_3 0xa13c
936 #define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_5 0xa15c
937 #define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_6 0xa16c
938 #define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_7 0xa17c
939 /* [RW 32] first 32b for enabling the output for close the gate nig. mapped
940 as follows: [0] NIG attention for function0; [1] NIG attention for
941 function1; [2] GPIO1 function 0; [3] GPIO2 function 0; [4] GPIO3 function
942 0; [5] GPIO4 function 0; [6] GPIO1 function 1; [7] GPIO2 function 1; [8]
943 GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event
944 function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP
945 Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14]
946 SPIO4; [15] SPIO5; [16] MSI/X indication for function 0; [17] MSI/X
947 indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt;
948 [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23]
949 SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26]
950 TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29]
951 TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */
952 #define MISC_REG_AEU_ENABLE1_NIG_0 0xa0ec
953 #define MISC_REG_AEU_ENABLE1_NIG_1 0xa18c
954 /* [RW 32] first 32b for enabling the output for close the gate pxp. mapped
955 as follows: [0] NIG attention for function0; [1] NIG attention for
956 function1; [2] GPIO1 function 0; [3] GPIO2 function 0; [4] GPIO3 function
957 0; [5] GPIO4 function 0; [6] GPIO1 function 1; [7] GPIO2 function 1; [8]
958 GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event
959 function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP
960 Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14]
961 SPIO4; [15] SPIO5; [16] MSI/X indication for function 0; [17] MSI/X
962 indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt;
963 [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23]
964 SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26]
965 TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29]
966 TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */
967 #define MISC_REG_AEU_ENABLE1_PXP_0 0xa0fc
968 #define MISC_REG_AEU_ENABLE1_PXP_1 0xa19c
969 /* [RW 32] second 32b for enabling the output for function 0 output0. mapped
970 as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM
971 Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw
972 interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity
973 error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw
974 interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14]
975 NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error;
976 [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw
977 interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM
978 Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI
979 Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM
980 Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw
982 #define MISC_REG_AEU_ENABLE2_FUNC_0_OUT_0 0xa070
983 #define MISC_REG_AEU_ENABLE2_FUNC_0_OUT_1 0xa080
984 /* [RW 32] second 32b for enabling the output for function 1 output0. mapped
985 as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM
986 Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw
987 interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity
988 error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw
989 interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14]
990 NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error;
991 [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw
992 interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM
993 Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI
994 Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM
995 Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw
997 #define MISC_REG_AEU_ENABLE2_FUNC_1_OUT_0 0xa110
998 #define MISC_REG_AEU_ENABLE2_FUNC_1_OUT_1 0xa120
999 /* [RW 32] second 32b for enabling the output for close the gate nig. mapped
1000 as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM
1001 Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw
1002 interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity
1003 error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw
1004 interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14]
1005 NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error;
1006 [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw
1007 interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM
1008 Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI
1009 Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM
1010 Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw
1012 #define MISC_REG_AEU_ENABLE2_NIG_0 0xa0f0
1013 #define MISC_REG_AEU_ENABLE2_NIG_1 0xa190
1014 /* [RW 32] second 32b for enabling the output for close the gate pxp. mapped
1015 as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM
1016 Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw
1017 interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity
1018 error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw
1019 interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14]
1020 NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error;
1021 [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw
1022 interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM
1023 Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI
1024 Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM
1025 Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw
1027 #define MISC_REG_AEU_ENABLE2_PXP_0 0xa100
1028 #define MISC_REG_AEU_ENABLE2_PXP_1 0xa1a0
1029 /* [RW 32] third 32b for enabling the output for function 0 output0. mapped
1030 as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP
1031 Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error;
1032 [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw
1033 interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity
1034 error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC)
1035 Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16]
1036 pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20]
1037 MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23]
1038 SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW
1039 timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3
1040 func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General
1042 #define MISC_REG_AEU_ENABLE3_FUNC_0_OUT_0 0xa074
1043 #define MISC_REG_AEU_ENABLE3_FUNC_0_OUT_1 0xa084
1044 /* [RW 32] third 32b for enabling the output for function 1 output0. mapped
1045 as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP
1046 Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error;
1047 [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw
1048 interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity
1049 error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC)
1050 Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16]
1051 pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20]
1052 MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23]
1053 SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW
1054 timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3
1055 func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General
1057 #define MISC_REG_AEU_ENABLE3_FUNC_1_OUT_0 0xa114
1058 #define MISC_REG_AEU_ENABLE3_FUNC_1_OUT_1 0xa124
1059 /* [RW 32] third 32b for enabling the output for close the gate nig. mapped
1060 as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP
1061 Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error;
1062 [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw
1063 interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity
1064 error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC)
1065 Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16]
1066 pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20]
1067 MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23]
1068 SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW
1069 timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3
1070 func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General
1072 #define MISC_REG_AEU_ENABLE3_NIG_0 0xa0f4
1073 #define MISC_REG_AEU_ENABLE3_NIG_1 0xa194
1074 /* [RW 32] third 32b for enabling the output for close the gate pxp. mapped
1075 as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP
1076 Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error;
1077 [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw
1078 interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity
1079 error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC)
1080 Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16]
1081 pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20]
1082 MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23]
1083 SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW
1084 timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3
1085 func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General
1087 #define MISC_REG_AEU_ENABLE3_PXP_0 0xa104
1088 #define MISC_REG_AEU_ENABLE3_PXP_1 0xa1a4
1089 /* [RW 32] fourth 32b for enabling the output for function 0 output0.mapped
1090 as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3]
1091 General attn5; [4] General attn6; [5] General attn7; [6] General attn8;
1092 [7] General attn9; [8] General attn10; [9] General attn11; [10] General
1093 attn12; [11] General attn13; [12] General attn14; [13] General attn15;
1094 [14] General attn16; [15] General attn17; [16] General attn18; [17]
1095 General attn19; [18] General attn20; [19] General attn21; [20] Main power
1096 interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN
1097 Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC
1098 Latched timeout attention; [27] GRC Latched reserved access attention;
1099 [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP
1100 Latched ump_tx_parity; [31] MCP Latched scpad_parity; */
1101 #define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_0 0xa078
1102 #define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_2 0xa098
1103 #define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_4 0xa0b8
1104 #define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_5 0xa0c8
1105 #define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_6 0xa0d8
1106 #define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_7 0xa0e8
1107 /* [RW 32] fourth 32b for enabling the output for function 1 output0.mapped
1108 as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3]
1109 General attn5; [4] General attn6; [5] General attn7; [6] General attn8;
1110 [7] General attn9; [8] General attn10; [9] General attn11; [10] General
1111 attn12; [11] General attn13; [12] General attn14; [13] General attn15;
1112 [14] General attn16; [15] General attn17; [16] General attn18; [17]
1113 General attn19; [18] General attn20; [19] General attn21; [20] Main power
1114 interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN
1115 Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC
1116 Latched timeout attention; [27] GRC Latched reserved access attention;
1117 [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP
1118 Latched ump_tx_parity; [31] MCP Latched scpad_parity; */
1119 #define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_0 0xa118
1120 #define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_2 0xa138
1121 #define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_4 0xa158
1122 #define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_5 0xa168
1123 #define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_6 0xa178
1124 #define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_7 0xa188
1125 /* [RW 32] fourth 32b for enabling the output for close the gate nig.mapped
1126 as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3]
1127 General attn5; [4] General attn6; [5] General attn7; [6] General attn8;
1128 [7] General attn9; [8] General attn10; [9] General attn11; [10] General
1129 attn12; [11] General attn13; [12] General attn14; [13] General attn15;
1130 [14] General attn16; [15] General attn17; [16] General attn18; [17]
1131 General attn19; [18] General attn20; [19] General attn21; [20] Main power
1132 interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN
1133 Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC
1134 Latched timeout attention; [27] GRC Latched reserved access attention;
1135 [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP
1136 Latched ump_tx_parity; [31] MCP Latched scpad_parity; */
1137 #define MISC_REG_AEU_ENABLE4_NIG_0 0xa0f8
1138 #define MISC_REG_AEU_ENABLE4_NIG_1 0xa198
1139 /* [RW 32] fourth 32b for enabling the output for close the gate pxp.mapped
1140 as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3]
1141 General attn5; [4] General attn6; [5] General attn7; [6] General attn8;
1142 [7] General attn9; [8] General attn10; [9] General attn11; [10] General
1143 attn12; [11] General attn13; [12] General attn14; [13] General attn15;
1144 [14] General attn16; [15] General attn17; [16] General attn18; [17]
1145 General attn19; [18] General attn20; [19] General attn21; [20] Main power
1146 interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN
1147 Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC
1148 Latched timeout attention; [27] GRC Latched reserved access attention;
1149 [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP
1150 Latched ump_tx_parity; [31] MCP Latched scpad_parity; */
1151 #define MISC_REG_AEU_ENABLE4_PXP_0 0xa108
1152 #define MISC_REG_AEU_ENABLE4_PXP_1 0xa1a8
1153 /* [RW 1] set/clr general attention 0; this will set/clr bit 94 in the aeu
1155 #define MISC_REG_AEU_GENERAL_ATTN_0 0xa000
1156 #define MISC_REG_AEU_GENERAL_ATTN_1 0xa004
1157 #define MISC_REG_AEU_GENERAL_ATTN_10 0xa028
1158 #define MISC_REG_AEU_GENERAL_ATTN_11 0xa02c
1159 #define MISC_REG_AEU_GENERAL_ATTN_12 0xa030
1160 #define MISC_REG_AEU_GENERAL_ATTN_13 0xa034
1161 #define MISC_REG_AEU_GENERAL_ATTN_14 0xa038
1162 #define MISC_REG_AEU_GENERAL_ATTN_15 0xa03c
1163 #define MISC_REG_AEU_GENERAL_ATTN_16 0xa040
1164 #define MISC_REG_AEU_GENERAL_ATTN_17 0xa044
1165 #define MISC_REG_AEU_GENERAL_ATTN_18 0xa048
1166 #define MISC_REG_AEU_GENERAL_ATTN_19 0xa04c
1167 #define MISC_REG_AEU_GENERAL_ATTN_10 0xa028
1168 #define MISC_REG_AEU_GENERAL_ATTN_11 0xa02c
1169 #define MISC_REG_AEU_GENERAL_ATTN_12 0xa030
1170 #define MISC_REG_AEU_GENERAL_ATTN_2 0xa008
1171 #define MISC_REG_AEU_GENERAL_ATTN_20 0xa050
1172 #define MISC_REG_AEU_GENERAL_ATTN_21 0xa054
1173 #define MISC_REG_AEU_GENERAL_ATTN_3 0xa00c
1174 #define MISC_REG_AEU_GENERAL_ATTN_4 0xa010
1175 #define MISC_REG_AEU_GENERAL_ATTN_5 0xa014
1176 #define MISC_REG_AEU_GENERAL_ATTN_6 0xa018
1177 #define MISC_REG_AEU_GENERAL_ATTN_7 0xa01c
1178 #define MISC_REG_AEU_GENERAL_ATTN_8 0xa020
1179 #define MISC_REG_AEU_GENERAL_ATTN_9 0xa024
1180 #define MISC_REG_AEU_GENERAL_MASK 0xa61c
1181 /* [RW 32] first 32b for inverting the input for function 0; for each bit:
1182 0= do not invert; 1= invert; mapped as follows: [0] NIG attention for
1183 function0; [1] NIG attention for function1; [2] GPIO1 mcp; [3] GPIO2 mcp;
1184 [4] GPIO3 mcp; [5] GPIO4 mcp; [6] GPIO1 function 1; [7] GPIO2 function 1;
1185 [8] GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event
1186 function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP
1187 Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14]
1188 SPIO4; [15] SPIO5; [16] MSI/X indication for mcp; [17] MSI/X indication
1189 for function 1; [18] BRB Parity error; [19] BRB Hw interrupt; [20] PRS
1190 Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23] SRC Hw
1191 interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26] TCM
1192 Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29] TSEMI
1193 Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */
1194 #define MISC_REG_AEU_INVERTER_1_FUNC_0 0xa22c
1195 #define MISC_REG_AEU_INVERTER_1_FUNC_1 0xa23c
1196 /* [RW 32] second 32b for inverting the input for function 0; for each bit:
1197 0= do not invert; 1= invert. mapped as follows: [0] PBClient Parity
1198 error; [1] PBClient Hw interrupt; [2] QM Parity error; [3] QM Hw
1199 interrupt; [4] Timers Parity error; [5] Timers Hw interrupt; [6] XSDM
1200 Parity error; [7] XSDM Hw interrupt; [8] XCM Parity error; [9] XCM Hw
1201 interrupt; [10] XSEMI Parity error; [11] XSEMI Hw interrupt; [12]
1202 DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14] NIG Parity
1203 error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error; [17] Vaux
1204 PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw interrupt;
1205 [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM Parity error;
1206 [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI Hw interrupt;
1207 [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM Parity error;
1208 [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw interrupt; */
1209 #define MISC_REG_AEU_INVERTER_2_FUNC_0 0xa230
1210 #define MISC_REG_AEU_INVERTER_2_FUNC_1 0xa240
1211 /* [RW 10] [7:0] = mask 8 attention output signals toward IGU function0;
1212 [9:8] = raserved. Zero = mask; one = unmask */
1213 #define MISC_REG_AEU_MASK_ATTN_FUNC_0 0xa060
1214 #define MISC_REG_AEU_MASK_ATTN_FUNC_1 0xa064
1215 /* [RW 1] If set a system kill occurred */
1216 #define MISC_REG_AEU_SYS_KILL_OCCURRED 0xa610
1217 /* [RW 32] Represent the status of the input vector to the AEU when a system
1218 kill occurred. The register is reset in por reset. Mapped as follows: [0]
1219 NIG attention for function0; [1] NIG attention for function1; [2] GPIO1
1220 mcp; [3] GPIO2 mcp; [4] GPIO3 mcp; [5] GPIO4 mcp; [6] GPIO1 function 1;
1221 [7] GPIO2 function 1; [8] GPIO3 function 1; [9] GPIO4 function 1; [10]
1222 PCIE glue/PXP VPD event function0; [11] PCIE glue/PXP VPD event
1223 function1; [12] PCIE glue/PXP Expansion ROM event0; [13] PCIE glue/PXP
1224 Expansion ROM event1; [14] SPIO4; [15] SPIO5; [16] MSI/X indication for
1225 mcp; [17] MSI/X indication for function 1; [18] BRB Parity error; [19]
1226 BRB Hw interrupt; [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC
1227 Parity error; [23] SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw
1228 interrupt; [26] TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI
1229 Parity error; [29] TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw
1231 #define MISC_REG_AEU_SYS_KILL_STATUS_0 0xa600
1232 #define MISC_REG_AEU_SYS_KILL_STATUS_1 0xa604
1233 #define MISC_REG_AEU_SYS_KILL_STATUS_2 0xa608
1234 #define MISC_REG_AEU_SYS_KILL_STATUS_3 0xa60c
1235 /* [R 4] This field indicates the type of the device. '0' - 2 Ports; '1' - 1
1237 #define MISC_REG_BOND_ID 0xa400
1238 /* [R 8] These bits indicate the metal revision of the chip. This value
1239 starts at 0x00 for each all-layer tape-out and increments by one for each
1241 #define MISC_REG_CHIP_METAL 0xa404
1242 /* [R 16] These bits indicate the part number for the chip. */
1243 #define MISC_REG_CHIP_NUM 0xa408
1244 /* [R 4] These bits indicate the base revision of the chip. This value
1245 starts at 0x0 for the A0 tape-out and increments by one for each
1246 all-layer tape-out. */
1247 #define MISC_REG_CHIP_REV 0xa40c
1248 /* [RW 32] The following driver registers(1...16) represent 16 drivers and
1249 32 clients. Each client can be controlled by one driver only. One in each
1250 bit represent that this driver control the appropriate client (Ex: bit 5
1251 is set means this driver control client number 5). addr1 = set; addr0 =
1252 clear; read from both addresses will give the same result = status. write
1253 to address 1 will set a request to control all the clients that their
1254 appropriate bit (in the write command) is set. if the client is free (the
1255 appropriate bit in all the other drivers is clear) one will be written to
1256 that driver register; if the client isn't free the bit will remain zero.
1257 if the appropriate bit is set (the driver request to gain control on a
1258 client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW
1259 interrupt will be asserted). write to address 0 will set a request to
1260 free all the clients that their appropriate bit (in the write command) is
1261 set. if the appropriate bit is clear (the driver request to free a client
1262 it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will
1264 #define MISC_REG_DRIVER_CONTROL_10 0xa3e0
1265 #define MISC_REG_DRIVER_CONTROL_10_SIZE 2
1266 /* [RW 32] The following driver registers(1...16) represent 16 drivers and
1267 32 clients. Each client can be controlled by one driver only. One in each
1268 bit represent that this driver control the appropriate client (Ex: bit 5
1269 is set means this driver control client number 5). addr1 = set; addr0 =
1270 clear; read from both addresses will give the same result = status. write
1271 to address 1 will set a request to control all the clients that their
1272 appropriate bit (in the write command) is set. if the client is free (the
1273 appropriate bit in all the other drivers is clear) one will be written to
1274 that driver register; if the client isn't free the bit will remain zero.
1275 if the appropriate bit is set (the driver request to gain control on a
1276 client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW
1277 interrupt will be asserted). write to address 0 will set a request to
1278 free all the clients that their appropriate bit (in the write command) is
1279 set. if the appropriate bit is clear (the driver request to free a client
1280 it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will
1282 #define MISC_REG_DRIVER_CONTROL_11 0xa3e8
1283 #define MISC_REG_DRIVER_CONTROL_11_SIZE 2
1284 /* [RW 32] The following driver registers(1...16) represent 16 drivers and
1285 32 clients. Each client can be controlled by one driver only. One in each
1286 bit represent that this driver control the appropriate client (Ex: bit 5
1287 is set means this driver control client number 5). addr1 = set; addr0 =
1288 clear; read from both addresses will give the same result = status. write
1289 to address 1 will set a request to control all the clients that their
1290 appropriate bit (in the write command) is set. if the client is free (the
1291 appropriate bit in all the other drivers is clear) one will be written to
1292 that driver register; if the client isn't free the bit will remain zero.
1293 if the appropriate bit is set (the driver request to gain control on a
1294 client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW
1295 interrupt will be asserted). write to address 0 will set a request to
1296 free all the clients that their appropriate bit (in the write command) is
1297 set. if the appropriate bit is clear (the driver request to free a client
1298 it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will
1300 #define MISC_REG_DRIVER_CONTROL_12 0xa3f0
1301 #define MISC_REG_DRIVER_CONTROL_12_SIZE 2
1302 /* [RW 32] The following driver registers(1...16) represent 16 drivers and
1303 32 clients. Each client can be controlled by one driver only. One in each
1304 bit represent that this driver control the appropriate client (Ex: bit 5
1305 is set means this driver control client number 5). addr1 = set; addr0 =
1306 clear; read from both addresses will give the same result = status. write
1307 to address 1 will set a request to control all the clients that their
1308 appropriate bit (in the write command) is set. if the client is free (the
1309 appropriate bit in all the other drivers is clear) one will be written to
1310 that driver register; if the client isn't free the bit will remain zero.
1311 if the appropriate bit is set (the driver request to gain control on a
1312 client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW
1313 interrupt will be asserted). write to address 0 will set a request to
1314 free all the clients that their appropriate bit (in the write command) is
1315 set. if the appropriate bit is clear (the driver request to free a client
1316 it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will
1318 #define MISC_REG_DRIVER_CONTROL_13 0xa3f8
1319 #define MISC_REG_DRIVER_CONTROL_13_SIZE 2
1320 /* [RW 32] The following driver registers(1...16) represent 16 drivers and
1321 32 clients. Each client can be controlled by one driver only. One in each
1322 bit represent that this driver control the appropriate client (Ex: bit 5
1323 is set means this driver control client number 5). addr1 = set; addr0 =
1324 clear; read from both addresses will give the same result = status. write
1325 to address 1 will set a request to control all the clients that their
1326 appropriate bit (in the write command) is set. if the client is free (the
1327 appropriate bit in all the other drivers is clear) one will be written to
1328 that driver register; if the client isn't free the bit will remain zero.
1329 if the appropriate bit is set (the driver request to gain control on a
1330 client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW
1331 interrupt will be asserted). write to address 0 will set a request to
1332 free all the clients that their appropriate bit (in the write command) is
1333 set. if the appropriate bit is clear (the driver request to free a client
1334 it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will
1336 #define MISC_REG_DRIVER_CONTROL_1 0xa510
1337 #define MISC_REG_DRIVER_CONTROL_14 0xa5e0
1338 #define MISC_REG_DRIVER_CONTROL_14_SIZE 2
1339 /* [RW 32] The following driver registers(1...16) represent 16 drivers and
1340 32 clients. Each client can be controlled by one driver only. One in each
1341 bit represent that this driver control the appropriate client (Ex: bit 5
1342 is set means this driver control client number 5). addr1 = set; addr0 =
1343 clear; read from both addresses will give the same result = status. write
1344 to address 1 will set a request to control all the clients that their
1345 appropriate bit (in the write command) is set. if the client is free (the
1346 appropriate bit in all the other drivers is clear) one will be written to
1347 that driver register; if the client isn't free the bit will remain zero.
1348 if the appropriate bit is set (the driver request to gain control on a
1349 client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW
1350 interrupt will be asserted). write to address 0 will set a request to
1351 free all the clients that their appropriate bit (in the write command) is
1352 set. if the appropriate bit is clear (the driver request to free a client
1353 it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will
1355 #define MISC_REG_DRIVER_CONTROL_15 0xa5e8
1356 #define MISC_REG_DRIVER_CONTROL_15_SIZE 2
1357 /* [RW 32] The following driver registers(1...16) represent 16 drivers and
1358 32 clients. Each client can be controlled by one driver only. One in each
1359 bit represent that this driver control the appropriate client (Ex: bit 5
1360 is set means this driver control client number 5). addr1 = set; addr0 =
1361 clear; read from both addresses will give the same result = status. write
1362 to address 1 will set a request to control all the clients that their
1363 appropriate bit (in the write command) is set. if the client is free (the
1364 appropriate bit in all the other drivers is clear) one will be written to
1365 that driver register; if the client isn't free the bit will remain zero.
1366 if the appropriate bit is set (the driver request to gain control on a
1367 client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW
1368 interrupt will be asserted). write to address 0 will set a request to
1369 free all the clients that their appropriate bit (in the write command) is
1370 set. if the appropriate bit is clear (the driver request to free a client
1371 it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will
1373 #define MISC_REG_DRIVER_CONTROL_16 0xa5f0
1374 #define MISC_REG_DRIVER_CONTROL_16_SIZE 2
1375 /* [RW 32] The following driver registers(1...16) represent 16 drivers and
1376 32 clients. Each client can be controlled by one driver only. One in each
1377 bit represent that this driver control the appropriate client (Ex: bit 5
1378 is set means this driver control client number 5). addr1 = set; addr0 =
1379 clear; read from both addresses will give the same result = status. write
1380 to address 1 will set a request to control all the clients that their
1381 appropriate bit (in the write command) is set. if the client is free (the
1382 appropriate bit in all the other drivers is clear) one will be written to
1383 that driver register; if the client isn't free the bit will remain zero.
1384 if the appropriate bit is set (the driver request to gain control on a
1385 client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW
1386 interrupt will be asserted). write to address 0 will set a request to
1387 free all the clients that their appropriate bit (in the write command) is
1388 set. if the appropriate bit is clear (the driver request to free a client
1389 it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will
1391 #define MISC_REG_DRIVER_CONTROL_7 0xa3c8
1392 /* [RW 1] e1hmf for WOL. If clr WOL signal o the PXP will be send on bit 0
1394 #define MISC_REG_E1HMF_MODE 0xa5f8
1395 /* [RW 32] GPIO. [31-28] FLOAT port 0; [27-24] FLOAT port 0; When any of
1396 these bits is written as a '1'; the corresponding SPIO bit will turn off
1397 it's drivers and become an input. This is the reset state of all GPIO
1398 pins. The read value of these bits will be a '1' if that last command
1399 (#SET; #CLR; or #FLOAT) for this bit was a #FLOAT. (reset value 0xff).
1400 [23-20] CLR port 1; 19-16] CLR port 0; When any of these bits is written
1401 as a '1'; the corresponding GPIO bit will drive low. The read value of
1402 these bits will be a '1' if that last command (#SET; #CLR; or #FLOAT) for
1403 this bit was a #CLR. (reset value 0). [15-12] SET port 1; 11-8] port 0;
1404 SET When any of these bits is written as a '1'; the corresponding GPIO
1405 bit will drive high (if it has that capability). The read value of these
1406 bits will be a '1' if that last command (#SET; #CLR; or #FLOAT) for this
1407 bit was a #SET. (reset value 0). [7-4] VALUE port 1; [3-0] VALUE port 0;
1408 RO; These bits indicate the read value of each of the eight GPIO pins.
1409 This is the result value of the pin; not the drive value. Writing these
1410 bits will have not effect. */
1411 #define MISC_REG_GPIO 0xa490
1412 /* [R 28] this field hold the last information that caused reserved
1413 attention. bits [19:0] - address; [22:20] function; [23] reserved;
1414 [27:24] the master thatcaused the attention - according to the following
1415 encodeing:1 = pxp; 2 = mcp; 3 = usdm; 4 = tsdm; 5 = xsdm; 6 = csdm; 7 =
1417 #define MISC_REG_GRC_RSV_ATTN 0xa3c0
1418 /* [R 28] this field hold the last information that caused timeout
1419 attention. bits [19:0] - address; [22:20] function; [23] reserved;
1420 [27:24] the master thatcaused the attention - according to the following
1421 encodeing:1 = pxp; 2 = mcp; 3 = usdm; 4 = tsdm; 5 = xsdm; 6 = csdm; 7 =
1423 #define MISC_REG_GRC_TIMEOUT_ATTN 0xa3c4
1424 /* [RW 1] Setting this bit enables a timer in the GRC block to timeout any
1425 access that does not finish within
1426 ~misc_registers_grc_timout_val.grc_timeout_val cycles. When this bit is
1427 cleared; this timeout is disabled. If this timeout occurs; the GRC shall
1428 assert it attention output. */
1429 #define MISC_REG_GRC_TIMEOUT_EN 0xa280
1430 /* [RW 28] 28 LSB of LCPLL first register; reset val = 521. inside order of
1431 the bits is: [2:0] OAC reset value 001) CML output buffer bias control;
1432 111 for +40%; 011 for +20%; 001 for 0%; 000 for -20%. [5:3] Icp_ctrl
1433 (reset value 001) Charge pump current control; 111 for 720u; 011 for
1434 600u; 001 for 480u and 000 for 360u. [7:6] Bias_ctrl (reset value 00)
1435 Global bias control; When bit 7 is high bias current will be 10 0gh; When
1436 bit 6 is high bias will be 100w; Valid values are 00; 10; 01. [10:8]
1437 Pll_observe (reset value 010) Bits to control observability. bit 10 is
1438 for test bias; bit 9 is for test CK; bit 8 is test Vc. [12:11] Vth_ctrl
1439 (reset value 00) Comparator threshold control. 00 for 0.6V; 01 for 0.54V
1440 and 10 for 0.66V. [13] pllSeqStart (reset value 0) Enables VCO tuning
1441 sequencer: 1= sequencer disabled; 0= sequencer enabled (inverted
1442 internally). [14] reserved (reset value 0) Reset for VCO sequencer is
1443 connected to RESET input directly. [15] capRetry_en (reset value 0)
1444 enable retry on cap search failure (inverted). [16] freqMonitor_e (reset
1445 value 0) bit to continuously monitor vco freq (inverted). [17]
1446 freqDetRestart_en (reset value 0) bit to enable restart when not freq
1447 locked (inverted). [18] freqDetRetry_en (reset value 0) bit to enable
1448 retry on freq det failure(inverted). [19] pllForceFdone_en (reset value
1449 0) bit to enable pllForceFdone & pllForceFpass into pllSeq. [20]
1450 pllForceFdone (reset value 0) bit to force freqDone. [21] pllForceFpass
1451 (reset value 0) bit to force freqPass. [22] pllForceDone_en (reset value
1452 0) bit to enable pllForceCapDone. [23] pllForceCapDone (reset value 0)
1453 bit to force capDone. [24] pllForceCapPass_en (reset value 0) bit to
1454 enable pllForceCapPass. [25] pllForceCapPass (reset value 0) bit to force
1455 capPass. [26] capRestart (reset value 0) bit to force cap sequencer to
1456 restart. [27] capSelectM_en (reset value 0) bit to enable cap select
1458 #define MISC_REG_LCPLL_CTRL_1 0xa2a4
1459 #define MISC_REG_LCPLL_CTRL_REG_2 0xa2a8
1460 /* [RW 4] Interrupt mask register #0 read/write */
1461 #define MISC_REG_MISC_INT_MASK 0xa388
1462 /* [RW 1] Parity mask register #0 read/write */
1463 #define MISC_REG_MISC_PRTY_MASK 0xa398
1464 /* [R 1] Parity register #0 read */
1465 #define MISC_REG_MISC_PRTY_STS 0xa38c
1466 #define MISC_REG_NIG_WOL_P0 0xa270
1467 #define MISC_REG_NIG_WOL_P1 0xa274
1468 /* [R 1] If set indicate that the pcie_rst_b was asserted without perst
1470 #define MISC_REG_PCIE_HOT_RESET 0xa618
1471 /* [RW 32] 32 LSB of storm PLL first register; reset val = 0x 071d2911.
1472 inside order of the bits is: [0] P1 divider[0] (reset value 1); [1] P1
1473 divider[1] (reset value 0); [2] P1 divider[2] (reset value 0); [3] P1
1474 divider[3] (reset value 0); [4] P2 divider[0] (reset value 1); [5] P2
1475 divider[1] (reset value 0); [6] P2 divider[2] (reset value 0); [7] P2
1476 divider[3] (reset value 0); [8] ph_det_dis (reset value 1); [9]
1477 freq_det_dis (reset value 0); [10] Icpx[0] (reset value 0); [11] Icpx[1]
1478 (reset value 1); [12] Icpx[2] (reset value 0); [13] Icpx[3] (reset value
1479 1); [14] Icpx[4] (reset value 0); [15] Icpx[5] (reset value 0); [16]
1480 Rx[0] (reset value 1); [17] Rx[1] (reset value 0); [18] vc_en (reset
1481 value 1); [19] vco_rng[0] (reset value 1); [20] vco_rng[1] (reset value
1482 1); [21] Kvco_xf[0] (reset value 0); [22] Kvco_xf[1] (reset value 0);
1483 [23] Kvco_xf[2] (reset value 0); [24] Kvco_xs[0] (reset value 1); [25]
1484 Kvco_xs[1] (reset value 1); [26] Kvco_xs[2] (reset value 1); [27]
1485 testd_en (reset value 0); [28] testd_sel[0] (reset value 0); [29]
1486 testd_sel[1] (reset value 0); [30] testd_sel[2] (reset value 0); [31]
1487 testa_en (reset value 0); */
1488 #define MISC_REG_PLL_STORM_CTRL_1 0xa294
1489 #define MISC_REG_PLL_STORM_CTRL_2 0xa298
1490 #define MISC_REG_PLL_STORM_CTRL_3 0xa29c
1491 #define MISC_REG_PLL_STORM_CTRL_4 0xa2a0
1492 /* [RW 32] reset reg#2; rite/read one = the specific block is out of reset;
1493 write/read zero = the specific block is in reset; addr 0-wr- the write
1494 value will be written to the register; addr 1-set - one will be written
1495 to all the bits that have the value of one in the data written (bits that
1496 have the value of zero will not be change) ; addr 2-clear - zero will be
1497 written to all the bits that have the value of one in the data written
1498 (bits that have the value of zero will not be change); addr 3-ignore;
1499 read ignore from all addr except addr 00; inside order of the bits is:
1500 [0] rst_bmac0; [1] rst_bmac1; [2] rst_emac0; [3] rst_emac1; [4] rst_grc;
1501 [5] rst_mcp_n_reset_reg_hard_core; [6] rst_ mcp_n_hard_core_rst_b; [7]
1502 rst_ mcp_n_reset_cmn_cpu; [8] rst_ mcp_n_reset_cmn_core; [9] rst_rbcn;
1503 [10] rst_dbg; [11] rst_misc_core; [12] rst_dbue (UART); [13]
1504 Pci_resetmdio_n; [14] rst_emac0_hard_core; [15] rst_emac1_hard_core; 16]
1505 rst_pxp_rq_rd_wr; 31:17] reserved */
1506 #define MISC_REG_RESET_REG_2 0xa590
1507 /* [RW 20] 20 bit GRC address where the scratch-pad of the MCP that is
1508 shared with the driver resides */
1509 #define MISC_REG_SHARED_MEM_ADDR 0xa2b4
1510 /* [RW 32] SPIO. [31-24] FLOAT When any of these bits is written as a '1';
1511 the corresponding SPIO bit will turn off it's drivers and become an
1512 input. This is the reset state of all SPIO pins. The read value of these
1513 bits will be a '1' if that last command (#SET; #CL; or #FLOAT) for this
1514 bit was a #FLOAT. (reset value 0xff). [23-16] CLR When any of these bits
1515 is written as a '1'; the corresponding SPIO bit will drive low. The read
1516 value of these bits will be a '1' if that last command (#SET; #CLR; or
1517 #FLOAT) for this bit was a #CLR. (reset value 0). [15-8] SET When any of
1518 these bits is written as a '1'; the corresponding SPIO bit will drive
1519 high (if it has that capability). The read value of these bits will be a
1520 '1' if that last command (#SET; #CLR; or #FLOAT) for this bit was a #SET.
1521 (reset value 0). [7-0] VALUE RO; These bits indicate the read value of
1522 each of the eight SPIO pins. This is the result value of the pin; not the
1523 drive value. Writing these bits will have not effect. Each 8 bits field
1524 is divided as follows: [0] VAUX Enable; when pulsed low; enables supply
1525 from VAUX. (This is an output pin only; the FLOAT field is not applicable
1526 for this pin); [1] VAUX Disable; when pulsed low; disables supply form
1527 VAUX. (This is an output pin only; FLOAT field is not applicable for this
1528 pin); [2] SEL_VAUX_B - Control to power switching logic. Drive low to
1529 select VAUX supply. (This is an output pin only; it is not controlled by
1530 the SET and CLR fields; it is controlled by the Main Power SM; the FLOAT
1531 field is not applicable for this pin; only the VALUE fields is relevant -
1532 it reflects the output value); [3] port swap [4] spio_4; [5] spio_5; [6]
1533 Bit 0 of UMP device ID select; read by UMP firmware; [7] Bit 1 of UMP
1534 device ID select; read by UMP firmware. */
1535 #define MISC_REG_SPIO 0xa4fc
1536 /* [RW 8] These bits enable the SPIO_INTs to signals event to the IGU/MC.
1537 according to the following map: [3:0] reserved; [4] spio_4 [5] spio_5;
1539 #define MISC_REG_SPIO_EVENT_EN 0xa2b8
1540 /* [RW 32] SPIO INT. [31-24] OLD_CLR Writing a '1' to these bit clears the
1541 corresponding bit in the #OLD_VALUE register. This will acknowledge an
1542 interrupt on the falling edge of corresponding SPIO input (reset value
1543 0). [23-16] OLD_SET Writing a '1' to these bit sets the corresponding bit
1544 in the #OLD_VALUE register. This will acknowledge an interrupt on the
1545 rising edge of corresponding SPIO input (reset value 0). [15-8] OLD_VALUE
1546 RO; These bits indicate the old value of the SPIO input value. When the
1547 ~INT_STATE bit is set; this bit indicates the OLD value of the pin such
1548 that if ~INT_STATE is set and this bit is '0'; then the interrupt is due
1549 to a low to high edge. If ~INT_STATE is set and this bit is '1'; then the
1550 interrupt is due to a high to low edge (reset value 0). [7-0] INT_STATE
1551 RO; These bits indicate the current SPIO interrupt state for each SPIO
1552 pin. This bit is cleared when the appropriate #OLD_SET or #OLD_CLR
1553 command bit is written. This bit is set when the SPIO input does not
1554 match the current value in #OLD_VALUE (reset value 0). */
1555 #define MISC_REG_SPIO_INT 0xa500
1556 /* [RW 1] Set by the MCP to remember if one or more of the drivers is/are
1557 loaded; 0-prepare; -unprepare */
1558 #define MISC_REG_UNPREPARED 0xa424
1559 #define NIG_MASK_INTERRUPT_PORT0_REG_MASK_EMAC0_MISC_MI_INT (0x1<<0)
1560 #define NIG_MASK_INTERRUPT_PORT0_REG_MASK_SERDES0_LINK_STATUS (0x1<<9)
1561 #define NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK10G (0x1<<15)
1562 #define NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK_STATUS (0xf<<18)
1563 /* [RW 1] Input enable for RX_BMAC0 IF */
1564 #define NIG_REG_BMAC0_IN_EN 0x100ac
1565 /* [RW 1] output enable for TX_BMAC0 IF */
1566 #define NIG_REG_BMAC0_OUT_EN 0x100e0
1567 /* [RW 1] output enable for TX BMAC pause port 0 IF */
1568 #define NIG_REG_BMAC0_PAUSE_OUT_EN 0x10110
1569 /* [RW 1] output enable for RX_BMAC0_REGS IF */
1570 #define NIG_REG_BMAC0_REGS_OUT_EN 0x100e8
1571 /* [RW 1] output enable for RX BRB1 port0 IF */
1572 #define NIG_REG_BRB0_OUT_EN 0x100f8
1573 /* [RW 1] Input enable for TX BRB1 pause port 0 IF */
1574 #define NIG_REG_BRB0_PAUSE_IN_EN 0x100c4
1575 /* [RW 1] output enable for RX BRB1 port1 IF */
1576 #define NIG_REG_BRB1_OUT_EN 0x100fc
1577 /* [RW 1] Input enable for TX BRB1 pause port 1 IF */
1578 #define NIG_REG_BRB1_PAUSE_IN_EN 0x100c8
1579 /* [RW 1] output enable for RX BRB1 LP IF */
1580 #define NIG_REG_BRB_LB_OUT_EN 0x10100
1581 /* [WB_W 82] Debug packet to LP from RBC; Data spelling:[63:0] data; 64]
1582 error; [67:65]eop_bvalid; [68]eop; [69]sop; [70]port_id; 71]flush;
1583 72:73]-vnic_num; 81:74]-sideband_info */
1584 #define NIG_REG_DEBUG_PACKET_LB 0x10800
1585 /* [RW 1] Input enable for TX Debug packet */
1586 #define NIG_REG_EGRESS_DEBUG_IN_EN 0x100dc
1587 /* [RW 1] If 1 - egress drain mode for port0 is active. In this mode all
1588 packets from PBFare not forwarded to the MAC and just deleted from FIFO.
1589 First packet may be deleted from the middle. And last packet will be
1590 always deleted till the end. */
1591 #define NIG_REG_EGRESS_DRAIN0_MODE 0x10060
1592 /* [RW 1] Output enable to EMAC0 */
1593 #define NIG_REG_EGRESS_EMAC0_OUT_EN 0x10120
1594 /* [RW 1] MAC configuration for packets of port0. If 1 - all packet outputs
1595 to emac for port0; other way to bmac for port0 */
1596 #define NIG_REG_EGRESS_EMAC0_PORT 0x10058
1597 /* [RW 32] TX_MNG_FIFO in NIG_TX_PORT0; data[31:0] written in FIFO order. */
1598 #define NIG_REG_EGRESS_MNG0_FIFO 0x1045c
1599 /* [RW 1] Input enable for TX PBF user packet port0 IF */
1600 #define NIG_REG_EGRESS_PBF0_IN_EN 0x100cc
1601 /* [RW 1] Input enable for TX PBF user packet port1 IF */
1602 #define NIG_REG_EGRESS_PBF1_IN_EN 0x100d0
1603 /* [RW 1] Input enable for RX_EMAC0 IF */
1604 #define NIG_REG_EMAC0_IN_EN 0x100a4
1605 /* [RW 1] output enable for TX EMAC pause port 0 IF */
1606 #define NIG_REG_EMAC0_PAUSE_OUT_EN 0x10118
1607 /* [R 1] status from emac0. This bit is set when MDINT from either the
1608 EXT_MDINT pin or from the Copper PHY is driven low. This condition must
1609 be cleared in the attached PHY device that is driving the MINT pin. */
1610 #define NIG_REG_EMAC0_STATUS_MISC_MI_INT 0x10494
1611 /* [WB 48] This address space contains BMAC0 registers. The BMAC registers
1612 are described in appendix A. In order to access the BMAC0 registers; the
1613 base address; NIG_REGISTERS_INGRESS_BMAC0_MEM; Offset: 0x10c00; should be
1614 added to each BMAC register offset */
1615 #define NIG_REG_INGRESS_BMAC0_MEM 0x10c00
1616 /* [WB 48] This address space contains BMAC1 registers. The BMAC registers
1617 are described in appendix A. In order to access the BMAC0 registers; the
1618 base address; NIG_REGISTERS_INGRESS_BMAC1_MEM; Offset: 0x11000; should be
1619 added to each BMAC register offset */
1620 #define NIG_REG_INGRESS_BMAC1_MEM 0x11000
1621 /* [R 1] FIFO empty in EOP descriptor FIFO of LP in NIG_RX_EOP */
1622 #define NIG_REG_INGRESS_EOP_LB_EMPTY 0x104e0
1623 /* [RW 17] Debug only. RX_EOP_DSCR_lb_FIFO in NIG_RX_EOP. Data
1624 packet_length[13:0]; mac_error[14]; trunc_error[15]; parity[16] */
1625 #define NIG_REG_INGRESS_EOP_LB_FIFO 0x104e4
1626 /* [RW 1] led 10g for port 0 */
1627 #define NIG_REG_LED_10G_P0 0x10320
1628 /* [RW 1] led 10g for port 1 */
1629 #define NIG_REG_LED_10G_P1 0x10324
1630 /* [RW 1] Port0: This bit is set to enable the use of the
1631 ~nig_registers_led_control_blink_rate_p0.led_control_blink_rate_p0 field
1632 defined below. If this bit is cleared; then the blink rate will be about
1634 #define NIG_REG_LED_CONTROL_BLINK_RATE_ENA_P0 0x10318
1635 /* [RW 12] Port0: Specifies the period of each blink cycle (on + off) for
1636 Traffic LED in milliseconds. Must be a non-zero value. This 12-bit field
1637 is reset to 0x080; giving a default blink period of approximately 8Hz. */
1638 #define NIG_REG_LED_CONTROL_BLINK_RATE_P0 0x10310
1639 /* [RW 1] Port0: If set along with the
1640 ~nig_registers_led_control_override_traffic_p0.led_control_override_traffic_p0
1641 bit and ~nig_registers_led_control_traffic_p0.led_control_traffic_p0 LED
1642 bit; the Traffic LED will blink with the blink rate specified in
1643 ~nig_registers_led_control_blink_rate_p0.led_control_blink_rate_p0 and
1644 ~nig_registers_led_control_blink_rate_ena_p0.led_control_blink_rate_ena_p0
1646 #define NIG_REG_LED_CONTROL_BLINK_TRAFFIC_P0 0x10308
1647 /* [RW 1] Port0: If set overrides hardware control of the Traffic LED. The
1648 Traffic LED will then be controlled via bit ~nig_registers_
1649 led_control_traffic_p0.led_control_traffic_p0 and bit
1650 ~nig_registers_led_control_blink_traffic_p0.led_control_blink_traffic_p0 */
1651 #define NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0 0x102f8
1652 /* [RW 1] Port0: If set along with the led_control_override_trafic_p0 bit;
1653 turns on the Traffic LED. If the led_control_blink_traffic_p0 bit is also
1654 set; the LED will blink with blink rate specified in
1655 ~nig_registers_led_control_blink_rate_p0.led_control_blink_rate_p0 and
1656 ~nig_regsters_led_control_blink_rate_ena_p0.led_control_blink_rate_ena_p0
1658 #define NIG_REG_LED_CONTROL_TRAFFIC_P0 0x10300
1659 /* [RW 4] led mode for port0: 0 MAC; 1-3 PHY1; 4 MAC2; 5-7 PHY4; 8-MAC3;
1660 9-11PHY7; 12 MAC4; 13-15 PHY10; */
1661 #define NIG_REG_LED_MODE_P0 0x102f0
1662 #define NIG_REG_LLH0_ACPI_PAT_0_CRC 0x1015c
1663 #define NIG_REG_LLH0_ACPI_PAT_6_LEN 0x10154
1664 #define NIG_REG_LLH0_BRB1_DRV_MASK 0x10244
1665 #define NIG_REG_LLH0_BRB1_DRV_MASK_MF 0x16048
1666 /* [RW 1] send to BRB1 if no match on any of RMP rules. */
1667 #define NIG_REG_LLH0_BRB1_NOT_MCP 0x1025c
1668 /* [RW 2] Determine the classification participants. 0: no classification.1:
1669 classification upon VLAN id. 2: classification upon MAC address. 3:
1670 classification upon both VLAN id & MAC addr. */
1671 #define NIG_REG_LLH0_CLS_TYPE 0x16080
1672 /* [RW 32] cm header for llh0 */
1673 #define NIG_REG_LLH0_CM_HEADER 0x1007c
1674 #define NIG_REG_LLH0_DEST_IP_0_1 0x101dc
1675 #define NIG_REG_LLH0_DEST_MAC_0_0 0x101c0
1676 /* [RW 16] destination TCP address 1. The LLH will look for this address in
1677 all incoming packets. */
1678 #define NIG_REG_LLH0_DEST_TCP_0 0x10220
1679 /* [RW 16] destination UDP address 1 The LLH will look for this address in
1680 all incoming packets. */
1681 #define NIG_REG_LLH0_DEST_UDP_0 0x10214
1682 #define NIG_REG_LLH0_ERROR_MASK 0x1008c
1683 /* [RW 8] event id for llh0 */
1684 #define NIG_REG_LLH0_EVENT_ID 0x10084
1685 #define NIG_REG_LLH0_FUNC_EN 0x160fc
1686 #define NIG_REG_LLH0_FUNC_VLAN_ID 0x16100
1687 /* [RW 1] Determine the IP version to look for in
1688 ~nig_registers_llh0_dest_ip_0.llh0_dest_ip_0. 0 - IPv6; 1-IPv4 */
1689 #define NIG_REG_LLH0_IPV4_IPV6_0 0x10208
1690 /* [RW 1] t bit for llh0 */
1691 #define NIG_REG_LLH0_T_BIT 0x10074
1692 /* [RW 12] VLAN ID 1. In case of VLAN packet the LLH will look for this ID. */
1693 #define NIG_REG_LLH0_VLAN_ID_0 0x1022c
1694 /* [RW 8] init credit counter for port0 in LLH */
1695 #define NIG_REG_LLH0_XCM_INIT_CREDIT 0x10554
1696 #define NIG_REG_LLH0_XCM_MASK 0x10130
1697 #define NIG_REG_LLH1_BRB1_DRV_MASK 0x10248
1698 /* [RW 1] send to BRB1 if no match on any of RMP rules. */
1699 #define NIG_REG_LLH1_BRB1_NOT_MCP 0x102dc
1700 /* [RW 2] Determine the classification participants. 0: no classification.1:
1701 classification upon VLAN id. 2: classification upon MAC address. 3:
1702 classification upon both VLAN id & MAC addr. */
1703 #define NIG_REG_LLH1_CLS_TYPE 0x16084
1704 /* [RW 32] cm header for llh1 */
1705 #define NIG_REG_LLH1_CM_HEADER 0x10080
1706 #define NIG_REG_LLH1_ERROR_MASK 0x10090
1707 /* [RW 8] event id for llh1 */
1708 #define NIG_REG_LLH1_EVENT_ID 0x10088
1709 /* [RW 8] init credit counter for port1 in LLH */
1710 #define NIG_REG_LLH1_XCM_INIT_CREDIT 0x10564
1711 #define NIG_REG_LLH1_XCM_MASK 0x10134
1712 /* [RW 1] When this bit is set; the LLH will expect all packets to be with
1714 #define NIG_REG_LLH_E1HOV_MODE 0x160d8
1715 /* [RW 1] When this bit is set; the LLH will classify the packet before
1716 sending it to the BRB or calculating WoL on it. */
1717 #define NIG_REG_LLH_MF_MODE 0x16024
1718 #define NIG_REG_MASK_INTERRUPT_PORT0 0x10330
1719 #define NIG_REG_MASK_INTERRUPT_PORT1 0x10334
1720 /* [RW 1] Output signal from NIG to EMAC0. When set enables the EMAC0 block. */
1721 #define NIG_REG_NIG_EMAC0_EN 0x1003c
1722 /* [RW 1] Output signal from NIG to EMAC1. When set enables the EMAC1 block. */
1723 #define NIG_REG_NIG_EMAC1_EN 0x10040
1724 /* [RW 1] Output signal from NIG to TX_EMAC0. When set indicates to the
1725 EMAC0 to strip the CRC from the ingress packets. */
1726 #define NIG_REG_NIG_INGRESS_EMAC0_NO_CRC 0x10044
1727 /* [R 32] Interrupt register #0 read */
1728 #define NIG_REG_NIG_INT_STS_0 0x103b0
1729 #define NIG_REG_NIG_INT_STS_1 0x103c0
1730 /* [R 32] Parity register #0 read */
1731 #define NIG_REG_NIG_PRTY_STS 0x103d0
1732 /* [RW 1] Input enable for RX PBF LP IF */
1733 #define NIG_REG_PBF_LB_IN_EN 0x100b4
1734 /* [RW 1] Value of this register will be transmitted to port swap when
1735 ~nig_registers_strap_override.strap_override =1 */
1736 #define NIG_REG_PORT_SWAP 0x10394
1737 /* [RW 1] output enable for RX parser descriptor IF */
1738 #define NIG_REG_PRS_EOP_OUT_EN 0x10104
1739 /* [RW 1] Input enable for RX parser request IF */
1740 #define NIG_REG_PRS_REQ_IN_EN 0x100b8
1741 /* [RW 5] control to serdes - CL22 PHY_ADD and CL45 PRTAD */
1742 #define NIG_REG_SERDES0_CTRL_PHY_ADDR 0x10374
1743 /* [R 1] status from serdes0 that inputs to interrupt logic of link status */
1744 #define NIG_REG_SERDES0_STATUS_LINK_STATUS 0x10578
1745 /* [R 32] Rx statistics : In user packets discarded due to BRB backpressure
1747 #define NIG_REG_STAT0_BRB_DISCARD 0x105f0
1748 /* [R 32] Rx statistics : In user packets truncated due to BRB backpressure
1750 #define NIG_REG_STAT0_BRB_TRUNCATE 0x105f8
1751 /* [WB_R 36] Tx statistics : Number of packets from emac0 or bmac0 that
1752 between 1024 and 1522 bytes for port0 */
1753 #define NIG_REG_STAT0_EGRESS_MAC_PKT0 0x10750
1754 /* [WB_R 36] Tx statistics : Number of packets from emac0 or bmac0 that
1755 between 1523 bytes and above for port0 */
1756 #define NIG_REG_STAT0_EGRESS_MAC_PKT1 0x10760
1757 /* [R 32] Rx statistics : In user packets discarded due to BRB backpressure
1759 #define NIG_REG_STAT1_BRB_DISCARD 0x10628
1760 /* [WB_R 36] Tx statistics : Number of packets from emac1 or bmac1 that
1761 between 1024 and 1522 bytes for port1 */
1762 #define NIG_REG_STAT1_EGRESS_MAC_PKT0 0x107a0
1763 /* [WB_R 36] Tx statistics : Number of packets from emac1 or bmac1 that
1764 between 1523 bytes and above for port1 */
1765 #define NIG_REG_STAT1_EGRESS_MAC_PKT1 0x107b0
1766 /* [WB_R 64] Rx statistics : User octets received for LP */
1767 #define NIG_REG_STAT2_BRB_OCTET 0x107e0
1768 #define NIG_REG_STATUS_INTERRUPT_PORT0 0x10328
1769 #define NIG_REG_STATUS_INTERRUPT_PORT1 0x1032c
1770 /* [RW 1] port swap mux selection. If this register equal to 0 then port
1771 swap is equal to SPIO pin that inputs from ifmux_serdes_swap. If 1 then
1772 ort swap is equal to ~nig_registers_port_swap.port_swap */
1773 #define NIG_REG_STRAP_OVERRIDE 0x10398
1774 /* [RW 1] output enable for RX_XCM0 IF */
1775 #define NIG_REG_XCM0_OUT_EN 0x100f0
1776 /* [RW 1] output enable for RX_XCM1 IF */
1777 #define NIG_REG_XCM1_OUT_EN 0x100f4
1778 /* [RW 1] control to xgxs - remote PHY in-band MDIO */
1779 #define NIG_REG_XGXS0_CTRL_EXTREMOTEMDIOST 0x10348
1780 /* [RW 5] control to xgxs - CL45 DEVAD */
1781 #define NIG_REG_XGXS0_CTRL_MD_DEVAD 0x1033c
1782 /* [RW 1] control to xgxs; 0 - clause 45; 1 - clause 22 */
1783 #define NIG_REG_XGXS0_CTRL_MD_ST 0x10338
1784 /* [RW 5] control to xgxs - CL22 PHY_ADD and CL45 PRTAD */
1785 #define NIG_REG_XGXS0_CTRL_PHY_ADDR 0x10340
1786 /* [R 1] status from xgxs0 that inputs to interrupt logic of link10g. */
1787 #define NIG_REG_XGXS0_STATUS_LINK10G 0x10680
1788 /* [R 4] status from xgxs0 that inputs to interrupt logic of link status */
1789 #define NIG_REG_XGXS0_STATUS_LINK_STATUS 0x10684
1790 /* [RW 2] selection for XGXS lane of port 0 in NIG_MUX block */
1791 #define NIG_REG_XGXS_LANE_SEL_P0 0x102e8
1792 /* [RW 1] selection for port0 for NIG_MUX block : 0 = SerDes; 1 = XGXS */
1793 #define NIG_REG_XGXS_SERDES0_MODE_SEL 0x102e0
1794 #define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_SERDES0_LINK_STATUS (0x1<<9)
1795 #define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK10G (0x1<<15)
1796 #define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS (0xf<<18)
1797 #define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS_SIZE 18
1798 /* [RW 1] Disable processing further tasks from port 0 (after ending the
1799 current task in process). */
1800 #define PBF_REG_DISABLE_NEW_TASK_PROC_P0 0x14005c
1801 /* [RW 1] Disable processing further tasks from port 1 (after ending the
1802 current task in process). */
1803 #define PBF_REG_DISABLE_NEW_TASK_PROC_P1 0x140060
1804 /* [RW 1] Disable processing further tasks from port 4 (after ending the
1805 current task in process). */
1806 #define PBF_REG_DISABLE_NEW_TASK_PROC_P4 0x14006c
1807 #define PBF_REG_IF_ENABLE_REG 0x140044
1808 /* [RW 1] Init bit. When set the initial credits are copied to the credit
1809 registers (except the port credits). Should be set and then reset after
1810 the configuration of the block has ended. */
1811 #define PBF_REG_INIT 0x140000
1812 /* [RW 1] Init bit for port 0. When set the initial credit of port 0 is
1813 copied to the credit register. Should be set and then reset after the
1814 configuration of the port has ended. */
1815 #define PBF_REG_INIT_P0 0x140004
1816 /* [RW 1] Init bit for port 1. When set the initial credit of port 1 is
1817 copied to the credit register. Should be set and then reset after the
1818 configuration of the port has ended. */
1819 #define PBF_REG_INIT_P1 0x140008
1820 /* [RW 1] Init bit for port 4. When set the initial credit of port 4 is
1821 copied to the credit register. Should be set and then reset after the
1822 configuration of the port has ended. */
1823 #define PBF_REG_INIT_P4 0x14000c
1824 /* [RW 1] Enable for mac interface 0. */
1825 #define PBF_REG_MAC_IF0_ENABLE 0x140030
1826 /* [RW 1] Enable for mac interface 1. */
1827 #define PBF_REG_MAC_IF1_ENABLE 0x140034
1828 /* [RW 1] Enable for the loopback interface. */
1829 #define PBF_REG_MAC_LB_ENABLE 0x140040
1830 /* [RW 10] Port 0 threshold used by arbiter in 16 byte lines used when pause
1832 #define PBF_REG_P0_ARB_THRSH 0x1400e4
1833 /* [R 11] Current credit for port 0 in the tx port buffers in 16 byte lines. */
1834 #define PBF_REG_P0_CREDIT 0x140200
1835 /* [RW 11] Initial credit for port 0 in the tx port buffers in 16 byte
1837 #define PBF_REG_P0_INIT_CRD 0x1400d0
1838 /* [RW 1] Indication that pause is enabled for port 0. */
1839 #define PBF_REG_P0_PAUSE_ENABLE 0x140014
1840 /* [R 8] Number of tasks in port 0 task queue. */
1841 #define PBF_REG_P0_TASK_CNT 0x140204
1842 /* [R 11] Current credit for port 1 in the tx port buffers in 16 byte lines. */
1843 #define PBF_REG_P1_CREDIT 0x140208
1844 /* [RW 11] Initial credit for port 1 in the tx port buffers in 16 byte
1846 #define PBF_REG_P1_INIT_CRD 0x1400d4
1847 /* [R 8] Number of tasks in port 1 task queue. */
1848 #define PBF_REG_P1_TASK_CNT 0x14020c
1849 /* [R 11] Current credit for port 4 in the tx port buffers in 16 byte lines. */
1850 #define PBF_REG_P4_CREDIT 0x140210
1851 /* [RW 11] Initial credit for port 4 in the tx port buffers in 16 byte
1853 #define PBF_REG_P4_INIT_CRD 0x1400e0
1854 /* [R 8] Number of tasks in port 4 task queue. */
1855 #define PBF_REG_P4_TASK_CNT 0x140214
1856 /* [RW 5] Interrupt mask register #0 read/write */
1857 #define PBF_REG_PBF_INT_MASK 0x1401d4
1858 /* [R 5] Interrupt register #0 read */
1859 #define PBF_REG_PBF_INT_STS 0x1401c8
1860 #define PB_REG_CONTROL 0
1861 /* [RW 2] Interrupt mask register #0 read/write */
1862 #define PB_REG_PB_INT_MASK 0x28
1863 /* [R 2] Interrupt register #0 read */
1864 #define PB_REG_PB_INT_STS 0x1c
1865 /* [RW 4] Parity mask register #0 read/write */
1866 #define PB_REG_PB_PRTY_MASK 0x38
1867 /* [R 4] Parity register #0 read */
1868 #define PB_REG_PB_PRTY_STS 0x2c
1869 #define PRS_REG_A_PRSU_20 0x40134
1870 /* [R 8] debug only: CFC load request current credit. Transaction based. */
1871 #define PRS_REG_CFC_LD_CURRENT_CREDIT 0x40164
1872 /* [R 8] debug only: CFC search request current credit. Transaction based. */
1873 #define PRS_REG_CFC_SEARCH_CURRENT_CREDIT 0x40168
1874 /* [RW 6] The initial credit for the search message to the CFC interface.
1875 Credit is transaction based. */
1876 #define PRS_REG_CFC_SEARCH_INITIAL_CREDIT 0x4011c
1877 /* [RW 24] CID for port 0 if no match */
1878 #define PRS_REG_CID_PORT_0 0x400fc
1879 /* [RW 32] The CM header for flush message where 'load existed' bit in CFC
1880 load response is reset and packet type is 0. Used in packet start message
1882 #define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_0 0x400dc
1883 #define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_1 0x400e0
1884 #define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_2 0x400e4
1885 #define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_3 0x400e8
1886 #define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_4 0x400ec
1887 /* [RW 32] The CM header for flush message where 'load existed' bit in CFC
1888 load response is set and packet type is 0. Used in packet start message
1890 #define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_0 0x400bc
1891 #define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_1 0x400c0
1892 #define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_2 0x400c4
1893 #define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_3 0x400c8
1894 #define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_4 0x400cc
1895 /* [RW 32] The CM header for a match and packet type 1 for loopback port.
1896 Used in packet start message to TCM. */
1897 #define PRS_REG_CM_HDR_LOOPBACK_TYPE_1 0x4009c
1898 #define PRS_REG_CM_HDR_LOOPBACK_TYPE_2 0x400a0
1899 #define PRS_REG_CM_HDR_LOOPBACK_TYPE_3 0x400a4
1900 #define PRS_REG_CM_HDR_LOOPBACK_TYPE_4 0x400a8
1901 /* [RW 32] The CM header for a match and packet type 0. Used in packet start
1903 #define PRS_REG_CM_HDR_TYPE_0 0x40078
1904 #define PRS_REG_CM_HDR_TYPE_1 0x4007c
1905 #define PRS_REG_CM_HDR_TYPE_2 0x40080
1906 #define PRS_REG_CM_HDR_TYPE_3 0x40084
1907 #define PRS_REG_CM_HDR_TYPE_4 0x40088
1908 /* [RW 32] The CM header in case there was not a match on the connection */
1909 #define PRS_REG_CM_NO_MATCH_HDR 0x400b8
1910 /* [RW 1] Indicates if in e1hov mode. 0=non-e1hov mode; 1=e1hov mode. */
1911 #define PRS_REG_E1HOV_MODE 0x401c8
1912 /* [RW 8] The 8-bit event ID for a match and packet type 1. Used in packet
1913 start message to TCM. */
1914 #define PRS_REG_EVENT_ID_1 0x40054
1915 #define PRS_REG_EVENT_ID_2 0x40058
1916 #define PRS_REG_EVENT_ID_3 0x4005c
1917 /* [RW 16] The Ethernet type value for FCoE */
1918 #define PRS_REG_FCOE_TYPE 0x401d0
1919 /* [RW 8] Context region for flush packet with packet type 0. Used in CFC
1920 load request message. */
1921 #define PRS_REG_FLUSH_REGIONS_TYPE_0 0x40004
1922 #define PRS_REG_FLUSH_REGIONS_TYPE_1 0x40008
1923 #define PRS_REG_FLUSH_REGIONS_TYPE_2 0x4000c
1924 #define PRS_REG_FLUSH_REGIONS_TYPE_3 0x40010
1925 #define PRS_REG_FLUSH_REGIONS_TYPE_4 0x40014
1926 #define PRS_REG_FLUSH_REGIONS_TYPE_5 0x40018
1927 #define PRS_REG_FLUSH_REGIONS_TYPE_6 0x4001c
1928 #define PRS_REG_FLUSH_REGIONS_TYPE_7 0x40020
1929 /* [RW 4] The increment value to send in the CFC load request message */
1930 #define PRS_REG_INC_VALUE 0x40048
1931 /* [RW 1] If set indicates not to send messages to CFC on received packets */
1932 #define PRS_REG_NIC_MODE 0x40138
1933 /* [RW 8] The 8-bit event ID for cases where there is no match on the
1934 connection. Used in packet start message to TCM. */
1935 #define PRS_REG_NO_MATCH_EVENT_ID 0x40070
1936 /* [ST 24] The number of input CFC flush packets */
1937 #define PRS_REG_NUM_OF_CFC_FLUSH_MESSAGES 0x40128
1938 /* [ST 32] The number of cycles the Parser halted its operation since it
1939 could not allocate the next serial number */
1940 #define PRS_REG_NUM_OF_DEAD_CYCLES 0x40130
1941 /* [ST 24] The number of input packets */
1942 #define PRS_REG_NUM_OF_PACKETS 0x40124
1943 /* [ST 24] The number of input transparent flush packets */
1944 #define PRS_REG_NUM_OF_TRANSPARENT_FLUSH_MESSAGES 0x4012c
1945 /* [RW 8] Context region for received Ethernet packet with a match and
1946 packet type 0. Used in CFC load request message */
1947 #define PRS_REG_PACKET_REGIONS_TYPE_0 0x40028
1948 #define PRS_REG_PACKET_REGIONS_TYPE_1 0x4002c
1949 #define PRS_REG_PACKET_REGIONS_TYPE_2 0x40030
1950 #define PRS_REG_PACKET_REGIONS_TYPE_3 0x40034
1951 #define PRS_REG_PACKET_REGIONS_TYPE_4 0x40038
1952 #define PRS_REG_PACKET_REGIONS_TYPE_5 0x4003c
1953 #define PRS_REG_PACKET_REGIONS_TYPE_6 0x40040
1954 #define PRS_REG_PACKET_REGIONS_TYPE_7 0x40044
1955 /* [R 2] debug only: Number of pending requests for CAC on port 0. */
1956 #define PRS_REG_PENDING_BRB_CAC0_RQ 0x40174
1957 /* [R 2] debug only: Number of pending requests for header parsing. */
1958 #define PRS_REG_PENDING_BRB_PRS_RQ 0x40170
1959 /* [R 1] Interrupt register #0 read */
1960 #define PRS_REG_PRS_INT_STS 0x40188
1961 /* [RW 8] Parity mask register #0 read/write */
1962 #define PRS_REG_PRS_PRTY_MASK 0x401a4
1963 /* [R 8] Parity register #0 read */
1964 #define PRS_REG_PRS_PRTY_STS 0x40198
1965 /* [RW 8] Context region for pure acknowledge packets. Used in CFC load
1967 #define PRS_REG_PURE_REGIONS 0x40024
1968 /* [R 32] debug only: Serial number status lsb 32 bits. '1' indicates this
1969 serail number was released by SDM but cannot be used because a previous
1970 serial number was not released. */
1971 #define PRS_REG_SERIAL_NUM_STATUS_LSB 0x40154
1972 /* [R 32] debug only: Serial number status msb 32 bits. '1' indicates this
1973 serail number was released by SDM but cannot be used because a previous
1974 serial number was not released. */
1975 #define PRS_REG_SERIAL_NUM_STATUS_MSB 0x40158
1976 /* [R 4] debug only: SRC current credit. Transaction based. */
1977 #define PRS_REG_SRC_CURRENT_CREDIT 0x4016c
1978 /* [R 8] debug only: TCM current credit. Cycle based. */
1979 #define PRS_REG_TCM_CURRENT_CREDIT 0x40160
1980 /* [R 8] debug only: TSDM current credit. Transaction based. */
1981 #define PRS_REG_TSDM_CURRENT_CREDIT 0x4015c
1982 /* [R 6] Debug only: Number of used entries in the data FIFO */
1983 #define PXP2_REG_HST_DATA_FIFO_STATUS 0x12047c
1984 /* [R 7] Debug only: Number of used entries in the header FIFO */
1985 #define PXP2_REG_HST_HEADER_FIFO_STATUS 0x120478
1986 #define PXP2_REG_PGL_ADDR_88_F0 0x120534
1987 #define PXP2_REG_PGL_ADDR_8C_F0 0x120538
1988 #define PXP2_REG_PGL_ADDR_90_F0 0x12053c
1989 #define PXP2_REG_PGL_ADDR_94_F0 0x120540
1990 #define PXP2_REG_PGL_CONTROL0 0x120490
1991 #define PXP2_REG_PGL_CONTROL1 0x120514
1992 /* [RW 32] third dword data of expansion rom request. this register is
1993 special. reading from it provides a vector outstanding read requests. if
1994 a bit is zero it means that a read request on the corresponding tag did
1995 not finish yet (not all completions have arrived for it) */
1996 #define PXP2_REG_PGL_EXP_ROM2 0x120808
1997 /* [RW 32] Inbound interrupt table for CSDM: bits[31:16]-mask;
1998 its[15:0]-address */
1999 #define PXP2_REG_PGL_INT_CSDM_0 0x1204f4
2000 #define PXP2_REG_PGL_INT_CSDM_1 0x1204f8
2001 #define PXP2_REG_PGL_INT_CSDM_2 0x1204fc
2002 #define PXP2_REG_PGL_INT_CSDM_3 0x120500
2003 #define PXP2_REG_PGL_INT_CSDM_4 0x120504
2004 #define PXP2_REG_PGL_INT_CSDM_5 0x120508
2005 #define PXP2_REG_PGL_INT_CSDM_6 0x12050c
2006 #define PXP2_REG_PGL_INT_CSDM_7 0x120510
2007 /* [RW 32] Inbound interrupt table for TSDM: bits[31:16]-mask;
2008 its[15:0]-address */
2009 #define PXP2_REG_PGL_INT_TSDM_0 0x120494
2010 #define PXP2_REG_PGL_INT_TSDM_1 0x120498
2011 #define PXP2_REG_PGL_INT_TSDM_2 0x12049c
2012 #define PXP2_REG_PGL_INT_TSDM_3 0x1204a0
2013 #define PXP2_REG_PGL_INT_TSDM_4 0x1204a4
2014 #define PXP2_REG_PGL_INT_TSDM_5 0x1204a8
2015 #define PXP2_REG_PGL_INT_TSDM_6 0x1204ac
2016 #define PXP2_REG_PGL_INT_TSDM_7 0x1204b0
2017 /* [RW 32] Inbound interrupt table for USDM: bits[31:16]-mask;
2018 its[15:0]-address */
2019 #define PXP2_REG_PGL_INT_USDM_0 0x1204b4
2020 #define PXP2_REG_PGL_INT_USDM_1 0x1204b8
2021 #define PXP2_REG_PGL_INT_USDM_2 0x1204bc
2022 #define PXP2_REG_PGL_INT_USDM_3 0x1204c0
2023 #define PXP2_REG_PGL_INT_USDM_4 0x1204c4
2024 #define PXP2_REG_PGL_INT_USDM_5 0x1204c8
2025 #define PXP2_REG_PGL_INT_USDM_6 0x1204cc
2026 #define PXP2_REG_PGL_INT_USDM_7 0x1204d0
2027 /* [RW 32] Inbound interrupt table for XSDM: bits[31:16]-mask;
2028 its[15:0]-address */
2029 #define PXP2_REG_PGL_INT_XSDM_0 0x1204d4
2030 #define PXP2_REG_PGL_INT_XSDM_1 0x1204d8
2031 #define PXP2_REG_PGL_INT_XSDM_2 0x1204dc
2032 #define PXP2_REG_PGL_INT_XSDM_3 0x1204e0
2033 #define PXP2_REG_PGL_INT_XSDM_4 0x1204e4
2034 #define PXP2_REG_PGL_INT_XSDM_5 0x1204e8
2035 #define PXP2_REG_PGL_INT_XSDM_6 0x1204ec
2036 #define PXP2_REG_PGL_INT_XSDM_7 0x1204f0
2037 /* [R 1] this bit indicates that a read request was blocked because of
2038 bus_master_en was deasserted */
2039 #define PXP2_REG_PGL_READ_BLOCKED 0x120568
2040 #define PXP2_REG_PGL_TAGS_LIMIT 0x1205a8
2041 /* [R 18] debug only */
2042 #define PXP2_REG_PGL_TXW_CDTS 0x12052c
2043 /* [R 1] this bit indicates that a write request was blocked because of
2044 bus_master_en was deasserted */
2045 #define PXP2_REG_PGL_WRITE_BLOCKED 0x120564
2046 #define PXP2_REG_PSWRQ_BW_ADD1 0x1201c0
2047 #define PXP2_REG_PSWRQ_BW_ADD10 0x1201e4
2048 #define PXP2_REG_PSWRQ_BW_ADD11 0x1201e8
2049 #define PXP2_REG_PSWRQ_BW_ADD10 0x1201e4
2050 #define PXP2_REG_PSWRQ_BW_ADD11 0x1201e8
2051 #define PXP2_REG_PSWRQ_BW_ADD2 0x1201c4
2052 #define PXP2_REG_PSWRQ_BW_ADD28 0x120228
2053 #define PXP2_REG_PSWRQ_BW_ADD28 0x120228
2054 #define PXP2_REG_PSWRQ_BW_ADD3 0x1201c8
2055 #define PXP2_REG_PSWRQ_BW_ADD6 0x1201d4
2056 #define PXP2_REG_PSWRQ_BW_ADD7 0x1201d8
2057 #define PXP2_REG_PSWRQ_BW_ADD8 0x1201dc
2058 #define PXP2_REG_PSWRQ_BW_ADD9 0x1201e0
2059 #define PXP2_REG_PSWRQ_BW_CREDIT 0x12032c
2060 #define PXP2_REG_PSWRQ_BW_L1 0x1202b0
2061 #define PXP2_REG_PSWRQ_BW_L10 0x1202d4
2062 #define PXP2_REG_PSWRQ_BW_L11 0x1202d8
2063 #define PXP2_REG_PSWRQ_BW_L10 0x1202d4
2064 #define PXP2_REG_PSWRQ_BW_L11 0x1202d8
2065 #define PXP2_REG_PSWRQ_BW_L2 0x1202b4
2066 #define PXP2_REG_PSWRQ_BW_L28 0x120318
2067 #define PXP2_REG_PSWRQ_BW_L28 0x120318
2068 #define PXP2_REG_PSWRQ_BW_L3 0x1202b8
2069 #define PXP2_REG_PSWRQ_BW_L6 0x1202c4
2070 #define PXP2_REG_PSWRQ_BW_L7 0x1202c8
2071 #define PXP2_REG_PSWRQ_BW_L8 0x1202cc
2072 #define PXP2_REG_PSWRQ_BW_L9 0x1202d0
2073 #define PXP2_REG_PSWRQ_BW_RD 0x120324
2074 #define PXP2_REG_PSWRQ_BW_UB1 0x120238
2075 #define PXP2_REG_PSWRQ_BW_UB10 0x12025c
2076 #define PXP2_REG_PSWRQ_BW_UB11 0x120260
2077 #define PXP2_REG_PSWRQ_BW_UB10 0x12025c
2078 #define PXP2_REG_PSWRQ_BW_UB11 0x120260
2079 #define PXP2_REG_PSWRQ_BW_UB2 0x12023c
2080 #define PXP2_REG_PSWRQ_BW_UB28 0x1202a0
2081 #define PXP2_REG_PSWRQ_BW_UB28 0x1202a0
2082 #define PXP2_REG_PSWRQ_BW_UB3 0x120240
2083 #define PXP2_REG_PSWRQ_BW_UB6 0x12024c
2084 #define PXP2_REG_PSWRQ_BW_UB7 0x120250
2085 #define PXP2_REG_PSWRQ_BW_UB8 0x120254
2086 #define PXP2_REG_PSWRQ_BW_UB9 0x120258
2087 #define PXP2_REG_PSWRQ_BW_WR 0x120328
2088 #define PXP2_REG_PSWRQ_CDU0_L2P 0x120000
2089 #define PXP2_REG_PSWRQ_QM0_L2P 0x120038
2090 #define PXP2_REG_PSWRQ_SRC0_L2P 0x120054
2091 #define PXP2_REG_PSWRQ_TM0_L2P 0x12001c
2092 #define PXP2_REG_PSWRQ_TSDM0_L2P 0x1200e0
2093 /* [RW 32] Interrupt mask register #0 read/write */
2094 #define PXP2_REG_PXP2_INT_MASK_0 0x120578
2095 /* [R 32] Interrupt register #0 read */
2096 #define PXP2_REG_PXP2_INT_STS_0 0x12056c
2097 #define PXP2_REG_PXP2_INT_STS_1 0x120608
2098 /* [RC 32] Interrupt register #0 read clear */
2099 #define PXP2_REG_PXP2_INT_STS_CLR_0 0x120570
2100 /* [RW 32] Parity mask register #0 read/write */
2101 #define PXP2_REG_PXP2_PRTY_MASK_0 0x120588
2102 #define PXP2_REG_PXP2_PRTY_MASK_1 0x120598
2103 /* [R 32] Parity register #0 read */
2104 #define PXP2_REG_PXP2_PRTY_STS_0 0x12057c
2105 #define PXP2_REG_PXP2_PRTY_STS_1 0x12058c
2106 /* [R 1] Debug only: The 'almost full' indication from each fifo (gives
2107 indication about backpressure) */
2108 #define PXP2_REG_RD_ALMOST_FULL_0 0x120424
2109 /* [R 8] Debug only: The blocks counter - number of unused block ids */
2110 #define PXP2_REG_RD_BLK_CNT 0x120418
2111 /* [RW 8] Debug only: Total number of available blocks in Tetris Buffer.
2112 Must be bigger than 6. Normally should not be changed. */
2113 #define PXP2_REG_RD_BLK_NUM_CFG 0x12040c
2114 /* [RW 2] CDU byte swapping mode configuration for master read requests */
2115 #define PXP2_REG_RD_CDURD_SWAP_MODE 0x120404
2116 /* [RW 1] When '1'; inputs to the PSWRD block are ignored */
2117 #define PXP2_REG_RD_DISABLE_INPUTS 0x120374
2118 /* [R 1] PSWRD internal memories initialization is done */
2119 #define PXP2_REG_RD_INIT_DONE 0x120370
2120 /* [RW 8] The maximum number of blocks in Tetris Buffer that can be
2121 allocated for vq10 */
2122 #define PXP2_REG_RD_MAX_BLKS_VQ10 0x1203a0
2123 /* [RW 8] The maximum number of blocks in Tetris Buffer that can be
2124 allocated for vq11 */
2125 #define PXP2_REG_RD_MAX_BLKS_VQ11 0x1203a4
2126 /* [RW 8] The maximum number of blocks in Tetris Buffer that can be
2127 allocated for vq17 */
2128 #define PXP2_REG_RD_MAX_BLKS_VQ17 0x1203bc
2129 /* [RW 8] The maximum number of blocks in Tetris Buffer that can be
2130 allocated for vq18 */
2131 #define PXP2_REG_RD_MAX_BLKS_VQ18 0x1203c0
2132 /* [RW 8] The maximum number of blocks in Tetris Buffer that can be
2133 allocated for vq19 */
2134 #define PXP2_REG_RD_MAX_BLKS_VQ19 0x1203c4
2135 /* [RW 8] The maximum number of blocks in Tetris Buffer that can be
2136 allocated for vq22 */
2137 #define PXP2_REG_RD_MAX_BLKS_VQ22 0x1203d0
2138 /* [RW 8] The maximum number of blocks in Tetris Buffer that can be
2139 allocated for vq6 */
2140 #define PXP2_REG_RD_MAX_BLKS_VQ6 0x120390
2141 /* [RW 8] The maximum number of blocks in Tetris Buffer that can be
2142 allocated for vq9 */
2143 #define PXP2_REG_RD_MAX_BLKS_VQ9 0x12039c
2144 /* [RW 2] PBF byte swapping mode configuration for master read requests */
2145 #define PXP2_REG_RD_PBF_SWAP_MODE 0x1203f4
2146 /* [R 1] Debug only: Indication if delivery ports are idle */
2147 #define PXP2_REG_RD_PORT_IS_IDLE_0 0x12041c
2148 #define PXP2_REG_RD_PORT_IS_IDLE_1 0x120420
2149 /* [RW 2] QM byte swapping mode configuration for master read requests */
2150 #define PXP2_REG_RD_QM_SWAP_MODE 0x1203f8
2151 /* [R 7] Debug only: The SR counter - number of unused sub request ids */
2152 #define PXP2_REG_RD_SR_CNT 0x120414
2153 /* [RW 2] SRC byte swapping mode configuration for master read requests */
2154 #define PXP2_REG_RD_SRC_SWAP_MODE 0x120400
2155 /* [RW 7] Debug only: Total number of available PCI read sub-requests. Must
2156 be bigger than 1. Normally should not be changed. */
2157 #define PXP2_REG_RD_SR_NUM_CFG 0x120408
2158 /* [RW 1] Signals the PSWRD block to start initializing internal memories */
2159 #define PXP2_REG_RD_START_INIT 0x12036c
2160 /* [RW 2] TM byte swapping mode configuration for master read requests */
2161 #define PXP2_REG_RD_TM_SWAP_MODE 0x1203fc
2162 /* [RW 10] Bandwidth addition to VQ0 write requests */
2163 #define PXP2_REG_RQ_BW_RD_ADD0 0x1201bc
2164 /* [RW 10] Bandwidth addition to VQ12 read requests */
2165 #define PXP2_REG_RQ_BW_RD_ADD12 0x1201ec
2166 /* [RW 10] Bandwidth addition to VQ13 read requests */
2167 #define PXP2_REG_RQ_BW_RD_ADD13 0x1201f0
2168 /* [RW 10] Bandwidth addition to VQ14 read requests */
2169 #define PXP2_REG_RQ_BW_RD_ADD14 0x1201f4
2170 /* [RW 10] Bandwidth addition to VQ15 read requests */
2171 #define PXP2_REG_RQ_BW_RD_ADD15 0x1201f8
2172 /* [RW 10] Bandwidth addition to VQ16 read requests */
2173 #define PXP2_REG_RQ_BW_RD_ADD16 0x1201fc
2174 /* [RW 10] Bandwidth addition to VQ17 read requests */
2175 #define PXP2_REG_RQ_BW_RD_ADD17 0x120200
2176 /* [RW 10] Bandwidth addition to VQ18 read requests */
2177 #define PXP2_REG_RQ_BW_RD_ADD18 0x120204
2178 /* [RW 10] Bandwidth addition to VQ19 read requests */
2179 #define PXP2_REG_RQ_BW_RD_ADD19 0x120208
2180 /* [RW 10] Bandwidth addition to VQ20 read requests */
2181 #define PXP2_REG_RQ_BW_RD_ADD20 0x12020c
2182 /* [RW 10] Bandwidth addition to VQ22 read requests */
2183 #define PXP2_REG_RQ_BW_RD_ADD22 0x120210
2184 /* [RW 10] Bandwidth addition to VQ23 read requests */
2185 #define PXP2_REG_RQ_BW_RD_ADD23 0x120214
2186 /* [RW 10] Bandwidth addition to VQ24 read requests */
2187 #define PXP2_REG_RQ_BW_RD_ADD24 0x120218
2188 /* [RW 10] Bandwidth addition to VQ25 read requests */
2189 #define PXP2_REG_RQ_BW_RD_ADD25 0x12021c
2190 /* [RW 10] Bandwidth addition to VQ26 read requests */
2191 #define PXP2_REG_RQ_BW_RD_ADD26 0x120220
2192 /* [RW 10] Bandwidth addition to VQ27 read requests */
2193 #define PXP2_REG_RQ_BW_RD_ADD27 0x120224
2194 /* [RW 10] Bandwidth addition to VQ4 read requests */
2195 #define PXP2_REG_RQ_BW_RD_ADD4 0x1201cc
2196 /* [RW 10] Bandwidth addition to VQ5 read requests */
2197 #define PXP2_REG_RQ_BW_RD_ADD5 0x1201d0
2198 /* [RW 10] Bandwidth Typical L for VQ0 Read requests */
2199 #define PXP2_REG_RQ_BW_RD_L0 0x1202ac
2200 /* [RW 10] Bandwidth Typical L for VQ12 Read requests */
2201 #define PXP2_REG_RQ_BW_RD_L12 0x1202dc
2202 /* [RW 10] Bandwidth Typical L for VQ13 Read requests */
2203 #define PXP2_REG_RQ_BW_RD_L13 0x1202e0
2204 /* [RW 10] Bandwidth Typical L for VQ14 Read requests */
2205 #define PXP2_REG_RQ_BW_RD_L14 0x1202e4
2206 /* [RW 10] Bandwidth Typical L for VQ15 Read requests */
2207 #define PXP2_REG_RQ_BW_RD_L15 0x1202e8
2208 /* [RW 10] Bandwidth Typical L for VQ16 Read requests */
2209 #define PXP2_REG_RQ_BW_RD_L16 0x1202ec
2210 /* [RW 10] Bandwidth Typical L for VQ17 Read requests */
2211 #define PXP2_REG_RQ_BW_RD_L17 0x1202f0
2212 /* [RW 10] Bandwidth Typical L for VQ18 Read requests */
2213 #define PXP2_REG_RQ_BW_RD_L18 0x1202f4
2214 /* [RW 10] Bandwidth Typical L for VQ19 Read requests */
2215 #define PXP2_REG_RQ_BW_RD_L19 0x1202f8
2216 /* [RW 10] Bandwidth Typical L for VQ20 Read requests */
2217 #define PXP2_REG_RQ_BW_RD_L20 0x1202fc
2218 /* [RW 10] Bandwidth Typical L for VQ22 Read requests */
2219 #define PXP2_REG_RQ_BW_RD_L22 0x120300
2220 /* [RW 10] Bandwidth Typical L for VQ23 Read requests */
2221 #define PXP2_REG_RQ_BW_RD_L23 0x120304
2222 /* [RW 10] Bandwidth Typical L for VQ24 Read requests */
2223 #define PXP2_REG_RQ_BW_RD_L24 0x120308
2224 /* [RW 10] Bandwidth Typical L for VQ25 Read requests */
2225 #define PXP2_REG_RQ_BW_RD_L25 0x12030c
2226 /* [RW 10] Bandwidth Typical L for VQ26 Read requests */
2227 #define PXP2_REG_RQ_BW_RD_L26 0x120310
2228 /* [RW 10] Bandwidth Typical L for VQ27 Read requests */
2229 #define PXP2_REG_RQ_BW_RD_L27 0x120314
2230 /* [RW 10] Bandwidth Typical L for VQ4 Read requests */
2231 #define PXP2_REG_RQ_BW_RD_L4 0x1202bc
2232 /* [RW 10] Bandwidth Typical L for VQ5 Read- currently not used */
2233 #define PXP2_REG_RQ_BW_RD_L5 0x1202c0
2234 /* [RW 7] Bandwidth upper bound for VQ0 read requests */
2235 #define PXP2_REG_RQ_BW_RD_UBOUND0 0x120234
2236 /* [RW 7] Bandwidth upper bound for VQ12 read requests */
2237 #define PXP2_REG_RQ_BW_RD_UBOUND12 0x120264
2238 /* [RW 7] Bandwidth upper bound for VQ13 read requests */
2239 #define PXP2_REG_RQ_BW_RD_UBOUND13 0x120268
2240 /* [RW 7] Bandwidth upper bound for VQ14 read requests */
2241 #define PXP2_REG_RQ_BW_RD_UBOUND14 0x12026c
2242 /* [RW 7] Bandwidth upper bound for VQ15 read requests */
2243 #define PXP2_REG_RQ_BW_RD_UBOUND15 0x120270
2244 /* [RW 7] Bandwidth upper bound for VQ16 read requests */
2245 #define PXP2_REG_RQ_BW_RD_UBOUND16 0x120274
2246 /* [RW 7] Bandwidth upper bound for VQ17 read requests */
2247 #define PXP2_REG_RQ_BW_RD_UBOUND17 0x120278
2248 /* [RW 7] Bandwidth upper bound for VQ18 read requests */
2249 #define PXP2_REG_RQ_BW_RD_UBOUND18 0x12027c
2250 /* [RW 7] Bandwidth upper bound for VQ19 read requests */
2251 #define PXP2_REG_RQ_BW_RD_UBOUND19 0x120280
2252 /* [RW 7] Bandwidth upper bound for VQ20 read requests */
2253 #define PXP2_REG_RQ_BW_RD_UBOUND20 0x120284
2254 /* [RW 7] Bandwidth upper bound for VQ22 read requests */
2255 #define PXP2_REG_RQ_BW_RD_UBOUND22 0x120288
2256 /* [RW 7] Bandwidth upper bound for VQ23 read requests */
2257 #define PXP2_REG_RQ_BW_RD_UBOUND23 0x12028c
2258 /* [RW 7] Bandwidth upper bound for VQ24 read requests */
2259 #define PXP2_REG_RQ_BW_RD_UBOUND24 0x120290
2260 /* [RW 7] Bandwidth upper bound for VQ25 read requests */
2261 #define PXP2_REG_RQ_BW_RD_UBOUND25 0x120294
2262 /* [RW 7] Bandwidth upper bound for VQ26 read requests */
2263 #define PXP2_REG_RQ_BW_RD_UBOUND26 0x120298
2264 /* [RW 7] Bandwidth upper bound for VQ27 read requests */
2265 #define PXP2_REG_RQ_BW_RD_UBOUND27 0x12029c
2266 /* [RW 7] Bandwidth upper bound for VQ4 read requests */
2267 #define PXP2_REG_RQ_BW_RD_UBOUND4 0x120244
2268 /* [RW 7] Bandwidth upper bound for VQ5 read requests */
2269 #define PXP2_REG_RQ_BW_RD_UBOUND5 0x120248
2270 /* [RW 10] Bandwidth addition to VQ29 write requests */
2271 #define PXP2_REG_RQ_BW_WR_ADD29 0x12022c
2272 /* [RW 10] Bandwidth addition to VQ30 write requests */
2273 #define PXP2_REG_RQ_BW_WR_ADD30 0x120230
2274 /* [RW 10] Bandwidth Typical L for VQ29 Write requests */
2275 #define PXP2_REG_RQ_BW_WR_L29 0x12031c
2276 /* [RW 10] Bandwidth Typical L for VQ30 Write requests */
2277 #define PXP2_REG_RQ_BW_WR_L30 0x120320
2278 /* [RW 7] Bandwidth upper bound for VQ29 */
2279 #define PXP2_REG_RQ_BW_WR_UBOUND29 0x1202a4
2280 /* [RW 7] Bandwidth upper bound for VQ30 */
2281 #define PXP2_REG_RQ_BW_WR_UBOUND30 0x1202a8
2282 /* [RW 18] external first_mem_addr field in L2P table for CDU module port 0 */
2283 #define PXP2_REG_RQ_CDU0_EFIRST_MEM_ADDR 0x120008
2284 /* [RW 2] Endian mode for cdu */
2285 #define PXP2_REG_RQ_CDU_ENDIAN_M 0x1201a0
2286 #define PXP2_REG_RQ_CDU_FIRST_ILT 0x12061c
2287 #define PXP2_REG_RQ_CDU_LAST_ILT 0x120620
2288 /* [RW 3] page size in L2P table for CDU module; -4k; -8k; -16k; -32k; -64k;
2290 #define PXP2_REG_RQ_CDU_P_SIZE 0x120018
2291 /* [R 1] 1' indicates that the requester has finished its internal
2293 #define PXP2_REG_RQ_CFG_DONE 0x1201b4
2294 /* [RW 2] Endian mode for debug */
2295 #define PXP2_REG_RQ_DBG_ENDIAN_M 0x1201a4
2296 /* [RW 1] When '1'; requests will enter input buffers but wont get out
2298 #define PXP2_REG_RQ_DISABLE_INPUTS 0x120330
2299 /* [RW 1] 1 - SR will be aligned by 64B; 0 - SR will be aligned by 8B */
2300 #define PXP2_REG_RQ_DRAM_ALIGN 0x1205b0
2301 /* [RW 1] If 1 ILT failiue will not result in ELT access; An interrupt will
2303 #define PXP2_REG_RQ_ELT_DISABLE 0x12066c
2304 /* [RW 2] Endian mode for hc */
2305 #define PXP2_REG_RQ_HC_ENDIAN_M 0x1201a8
2306 /* [RW 1] when '0' ILT logic will work as in A0; otherwise B0; for back
2307 compatibility needs; Note that different registers are used per mode */
2308 #define PXP2_REG_RQ_ILT_MODE 0x1205b4
2309 /* [WB 53] Onchip address table */
2310 #define PXP2_REG_RQ_ONCHIP_AT 0x122000
2311 /* [WB 53] Onchip address table - B0 */
2312 #define PXP2_REG_RQ_ONCHIP_AT_B0 0x128000
2313 /* [RW 13] Pending read limiter threshold; in Dwords */
2314 #define PXP2_REG_RQ_PDR_LIMIT 0x12033c
2315 /* [RW 2] Endian mode for qm */
2316 #define PXP2_REG_RQ_QM_ENDIAN_M 0x120194
2317 #define PXP2_REG_RQ_QM_FIRST_ILT 0x120634
2318 #define PXP2_REG_RQ_QM_LAST_ILT 0x120638
2319 /* [RW 3] page size in L2P table for QM module; -4k; -8k; -16k; -32k; -64k;
2321 #define PXP2_REG_RQ_QM_P_SIZE 0x120050
2322 /* [RW 1] 1' indicates that the RBC has finished configurating the PSWRQ */
2323 #define PXP2_REG_RQ_RBC_DONE 0x1201b0
2324 /* [RW 3] Max burst size filed for read requests port 0; 000 - 128B;
2325 001:256B; 010: 512B; 11:1K:100:2K; 01:4K */
2326 #define PXP2_REG_RQ_RD_MBS0 0x120160
2327 /* [RW 3] Max burst size filed for read requests port 1; 000 - 128B;
2328 001:256B; 010: 512B; 11:1K:100:2K; 01:4K */
2329 #define PXP2_REG_RQ_RD_MBS1 0x120168
2330 /* [RW 2] Endian mode for src */
2331 #define PXP2_REG_RQ_SRC_ENDIAN_M 0x12019c
2332 #define PXP2_REG_RQ_SRC_FIRST_ILT 0x12063c
2333 #define PXP2_REG_RQ_SRC_LAST_ILT 0x120640
2334 /* [RW 3] page size in L2P table for SRC module; -4k; -8k; -16k; -32k; -64k;
2336 #define PXP2_REG_RQ_SRC_P_SIZE 0x12006c
2337 /* [RW 2] Endian mode for tm */
2338 #define PXP2_REG_RQ_TM_ENDIAN_M 0x120198
2339 #define PXP2_REG_RQ_TM_FIRST_ILT 0x120644
2340 #define PXP2_REG_RQ_TM_LAST_ILT 0x120648
2341 /* [RW 3] page size in L2P table for TM module; -4k; -8k; -16k; -32k; -64k;
2343 #define PXP2_REG_RQ_TM_P_SIZE 0x120034
2344 /* [R 5] Number of entries in the ufifo; his fifo has l2p completions */
2345 #define PXP2_REG_RQ_UFIFO_NUM_OF_ENTRY 0x12080c
2346 /* [RW 18] external first_mem_addr field in L2P table for USDM module port 0 */
2347 #define PXP2_REG_RQ_USDM0_EFIRST_MEM_ADDR 0x120094
2348 /* [R 8] Number of entries occupied by vq 0 in pswrq memory */
2349 #define PXP2_REG_RQ_VQ0_ENTRY_CNT 0x120810
2350 /* [R 8] Number of entries occupied by vq 10 in pswrq memory */
2351 #define PXP2_REG_RQ_VQ10_ENTRY_CNT 0x120818
2352 /* [R 8] Number of entries occupied by vq 11 in pswrq memory */
2353 #define PXP2_REG_RQ_VQ11_ENTRY_CNT 0x120820
2354 /* [R 8] Number of entries occupied by vq 12 in pswrq memory */
2355 #define PXP2_REG_RQ_VQ12_ENTRY_CNT 0x120828
2356 /* [R 8] Number of entries occupied by vq 13 in pswrq memory */
2357 #define PXP2_REG_RQ_VQ13_ENTRY_CNT 0x120830
2358 /* [R 8] Number of entries occupied by vq 14 in pswrq memory */
2359 #define PXP2_REG_RQ_VQ14_ENTRY_CNT 0x120838
2360 /* [R 8] Number of entries occupied by vq 15 in pswrq memory */
2361 #define PXP2_REG_RQ_VQ15_ENTRY_CNT 0x120840
2362 /* [R 8] Number of entries occupied by vq 16 in pswrq memory */
2363 #define PXP2_REG_RQ_VQ16_ENTRY_CNT 0x120848
2364 /* [R 8] Number of entries occupied by vq 17 in pswrq memory */
2365 #define PXP2_REG_RQ_VQ17_ENTRY_CNT 0x120850
2366 /* [R 8] Number of entries occupied by vq 18 in pswrq memory */
2367 #define PXP2_REG_RQ_VQ18_ENTRY_CNT 0x120858
2368 /* [R 8] Number of entries occupied by vq 19 in pswrq memory */
2369 #define PXP2_REG_RQ_VQ19_ENTRY_CNT 0x120860
2370 /* [R 8] Number of entries occupied by vq 1 in pswrq memory */
2371 #define PXP2_REG_RQ_VQ1_ENTRY_CNT 0x120868
2372 /* [R 8] Number of entries occupied by vq 20 in pswrq memory */
2373 #define PXP2_REG_RQ_VQ20_ENTRY_CNT 0x120870
2374 /* [R 8] Number of entries occupied by vq 21 in pswrq memory */
2375 #define PXP2_REG_RQ_VQ21_ENTRY_CNT 0x120878
2376 /* [R 8] Number of entries occupied by vq 22 in pswrq memory */
2377 #define PXP2_REG_RQ_VQ22_ENTRY_CNT 0x120880
2378 /* [R 8] Number of entries occupied by vq 23 in pswrq memory */
2379 #define PXP2_REG_RQ_VQ23_ENTRY_CNT 0x120888
2380 /* [R 8] Number of entries occupied by vq 24 in pswrq memory */
2381 #define PXP2_REG_RQ_VQ24_ENTRY_CNT 0x120890
2382 /* [R 8] Number of entries occupied by vq 25 in pswrq memory */
2383 #define PXP2_REG_RQ_VQ25_ENTRY_CNT 0x120898
2384 /* [R 8] Number of entries occupied by vq 26 in pswrq memory */
2385 #define PXP2_REG_RQ_VQ26_ENTRY_CNT 0x1208a0
2386 /* [R 8] Number of entries occupied by vq 27 in pswrq memory */
2387 #define PXP2_REG_RQ_VQ27_ENTRY_CNT 0x1208a8
2388 /* [R 8] Number of entries occupied by vq 28 in pswrq memory */
2389 #define PXP2_REG_RQ_VQ28_ENTRY_CNT 0x1208b0
2390 /* [R 8] Number of entries occupied by vq 29 in pswrq memory */
2391 #define PXP2_REG_RQ_VQ29_ENTRY_CNT 0x1208b8
2392 /* [R 8] Number of entries occupied by vq 2 in pswrq memory */
2393 #define PXP2_REG_RQ_VQ2_ENTRY_CNT 0x1208c0
2394 /* [R 8] Number of entries occupied by vq 30 in pswrq memory */
2395 #define PXP2_REG_RQ_VQ30_ENTRY_CNT 0x1208c8
2396 /* [R 8] Number of entries occupied by vq 31 in pswrq memory */
2397 #define PXP2_REG_RQ_VQ31_ENTRY_CNT 0x1208d0
2398 /* [R 8] Number of entries occupied by vq 3 in pswrq memory */
2399 #define PXP2_REG_RQ_VQ3_ENTRY_CNT 0x1208d8
2400 /* [R 8] Number of entries occupied by vq 4 in pswrq memory */
2401 #define PXP2_REG_RQ_VQ4_ENTRY_CNT 0x1208e0
2402 /* [R 8] Number of entries occupied by vq 5 in pswrq memory */
2403 #define PXP2_REG_RQ_VQ5_ENTRY_CNT 0x1208e8
2404 /* [R 8] Number of entries occupied by vq 6 in pswrq memory */
2405 #define PXP2_REG_RQ_VQ6_ENTRY_CNT 0x1208f0
2406 /* [R 8] Number of entries occupied by vq 7 in pswrq memory */
2407 #define PXP2_REG_RQ_VQ7_ENTRY_CNT 0x1208f8
2408 /* [R 8] Number of entries occupied by vq 8 in pswrq memory */
2409 #define PXP2_REG_RQ_VQ8_ENTRY_CNT 0x120900
2410 /* [R 8] Number of entries occupied by vq 9 in pswrq memory */
2411 #define PXP2_REG_RQ_VQ9_ENTRY_CNT 0x120908
2412 /* [RW 3] Max burst size filed for write requests port 0; 000 - 128B;
2413 001:256B; 010: 512B; */
2414 #define PXP2_REG_RQ_WR_MBS0 0x12015c
2415 /* [RW 3] Max burst size filed for write requests port 1; 000 - 128B;
2416 001:256B; 010: 512B; */
2417 #define PXP2_REG_RQ_WR_MBS1 0x120164
2418 /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
2419 buffer reaches this number has_payload will be asserted */
2420 #define PXP2_REG_WR_CDU_MPS 0x1205f0
2421 /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
2422 buffer reaches this number has_payload will be asserted */
2423 #define PXP2_REG_WR_CSDM_MPS 0x1205d0
2424 /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
2425 buffer reaches this number has_payload will be asserted */
2426 #define PXP2_REG_WR_DBG_MPS 0x1205e8
2427 /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
2428 buffer reaches this number has_payload will be asserted */
2429 #define PXP2_REG_WR_DMAE_MPS 0x1205ec
2430 /* [RW 10] if Number of entries in dmae fifo will be higer than this
2431 threshold then has_payload indication will be asserted; the default value
2432 should be equal to > write MBS size! */
2433 #define PXP2_REG_WR_DMAE_TH 0x120368
2434 /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
2435 buffer reaches this number has_payload will be asserted */
2436 #define PXP2_REG_WR_HC_MPS 0x1205c8
2437 /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
2438 buffer reaches this number has_payload will be asserted */
2439 #define PXP2_REG_WR_QM_MPS 0x1205dc
2440 /* [RW 1] 0 - working in A0 mode; - working in B0 mode */
2441 #define PXP2_REG_WR_REV_MODE 0x120670
2442 /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
2443 buffer reaches this number has_payload will be asserted */
2444 #define PXP2_REG_WR_SRC_MPS 0x1205e4
2445 /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
2446 buffer reaches this number has_payload will be asserted */
2447 #define PXP2_REG_WR_TM_MPS 0x1205e0
2448 /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
2449 buffer reaches this number has_payload will be asserted */
2450 #define PXP2_REG_WR_TSDM_MPS 0x1205d4
2451 /* [RW 10] if Number of entries in usdmdp fifo will be higer than this
2452 threshold then has_payload indication will be asserted; the default value
2453 should be equal to > write MBS size! */
2454 #define PXP2_REG_WR_USDMDP_TH 0x120348
2455 /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
2456 buffer reaches this number has_payload will be asserted */
2457 #define PXP2_REG_WR_USDM_MPS 0x1205cc
2458 /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
2459 buffer reaches this number has_payload will be asserted */
2460 #define PXP2_REG_WR_XSDM_MPS 0x1205d8
2461 /* [R 1] debug only: Indication if PSWHST arbiter is idle */
2462 #define PXP_REG_HST_ARB_IS_IDLE 0x103004
2463 /* [R 8] debug only: A bit mask for all PSWHST arbiter clients. '1' means
2464 this client is waiting for the arbiter. */
2465 #define PXP_REG_HST_CLIENTS_WAITING_TO_ARB 0x103008
2466 /* [R 1] debug only: '1' means this PSWHST is discarding doorbells. This bit
2467 should update accoring to 'hst_discard_doorbells' register when the state
2469 #define PXP_REG_HST_DISCARD_DOORBELLS_STATUS 0x1030a0
2470 /* [R 6] debug only: A bit mask for all PSWHST internal write clients. '1'
2471 means this PSWHST is discarding inputs from this client. Each bit should
2472 update accoring to 'hst_discard_internal_writes' register when the state
2474 #define PXP_REG_HST_DISCARD_INTERNAL_WRITES_STATUS 0x10309c
2475 /* [WB 160] Used for initialization of the inbound interrupts memory */
2476 #define PXP_REG_HST_INBOUND_INT 0x103800
2477 /* [RW 32] Interrupt mask register #0 read/write */
2478 #define PXP_REG_PXP_INT_MASK_0 0x103074
2479 #define PXP_REG_PXP_INT_MASK_1 0x103084
2480 /* [R 32] Interrupt register #0 read */
2481 #define PXP_REG_PXP_INT_STS_0 0x103068
2482 #define PXP_REG_PXP_INT_STS_1 0x103078
2483 /* [RC 32] Interrupt register #0 read clear */
2484 #define PXP_REG_PXP_INT_STS_CLR_0 0x10306c
2485 /* [RW 26] Parity mask register #0 read/write */
2486 #define PXP_REG_PXP_PRTY_MASK 0x103094
2487 /* [R 26] Parity register #0 read */
2488 #define PXP_REG_PXP_PRTY_STS 0x103088
2489 /* [RW 4] The activity counter initial increment value sent in the load
2491 #define QM_REG_ACTCTRINITVAL_0 0x168040
2492 #define QM_REG_ACTCTRINITVAL_1 0x168044
2493 #define QM_REG_ACTCTRINITVAL_2 0x168048
2494 #define QM_REG_ACTCTRINITVAL_3 0x16804c
2495 /* [RW 32] The base logical address (in bytes) of each physical queue. The
2496 index I represents the physical queue number. The 12 lsbs are ignore and
2497 considered zero so practically there are only 20 bits in this register;
2499 #define QM_REG_BASEADDR 0x168900
2500 /* [RW 16] The byte credit cost for each task. This value is for both ports */
2501 #define QM_REG_BYTECRDCOST 0x168234
2502 /* [RW 16] The initial byte credit value for both ports. */
2503 #define QM_REG_BYTECRDINITVAL 0x168238
2504 /* [RW 32] A bit per physical queue. If the bit is cleared then the physical
2505 queue uses port 0 else it uses port 1; queues 31-0 */
2506 #define QM_REG_BYTECRDPORT_LSB 0x168228
2507 /* [RW 32] A bit per physical queue. If the bit is cleared then the physical
2508 queue uses port 0 else it uses port 1; queues 95-64 */
2509 #define QM_REG_BYTECRDPORT_LSB_EXT_A 0x16e520
2510 /* [RW 32] A bit per physical queue. If the bit is cleared then the physical
2511 queue uses port 0 else it uses port 1; queues 63-32 */
2512 #define QM_REG_BYTECRDPORT_MSB 0x168224
2513 /* [RW 32] A bit per physical queue. If the bit is cleared then the physical
2514 queue uses port 0 else it uses port 1; queues 127-96 */
2515 #define QM_REG_BYTECRDPORT_MSB_EXT_A 0x16e51c
2516 /* [RW 16] The byte credit value that if above the QM is considered almost
2518 #define QM_REG_BYTECREDITAFULLTHR 0x168094
2519 /* [RW 4] The initial credit for interface */
2520 #define QM_REG_CMINITCRD_0 0x1680cc
2521 #define QM_REG_CMINITCRD_1 0x1680d0
2522 #define QM_REG_CMINITCRD_2 0x1680d4
2523 #define QM_REG_CMINITCRD_3 0x1680d8
2524 #define QM_REG_CMINITCRD_4 0x1680dc
2525 #define QM_REG_CMINITCRD_5 0x1680e0
2526 #define QM_REG_CMINITCRD_6 0x1680e4
2527 #define QM_REG_CMINITCRD_7 0x1680e8
2528 /* [RW 8] A mask bit per CM interface. If this bit is 0 then this interface
2530 #define QM_REG_CMINTEN 0x1680ec
2531 /* [RW 12] A bit vector which indicates which one of the queues are tied to
2533 #define QM_REG_CMINTVOQMASK_0 0x1681f4
2534 #define QM_REG_CMINTVOQMASK_1 0x1681f8
2535 #define QM_REG_CMINTVOQMASK_2 0x1681fc
2536 #define QM_REG_CMINTVOQMASK_3 0x168200
2537 #define QM_REG_CMINTVOQMASK_4 0x168204
2538 #define QM_REG_CMINTVOQMASK_5 0x168208
2539 #define QM_REG_CMINTVOQMASK_6 0x16820c
2540 #define QM_REG_CMINTVOQMASK_7 0x168210
2541 /* [RW 20] The number of connections divided by 16 which dictates the size
2542 of each queue which belongs to even function number. */
2543 #define QM_REG_CONNNUM_0 0x168020
2544 /* [R 6] Keep the fill level of the fifo from write client 4 */
2545 #define QM_REG_CQM_WRC_FIFOLVL 0x168018
2546 /* [RW 8] The context regions sent in the CFC load request */
2547 #define QM_REG_CTXREG_0 0x168030
2548 #define QM_REG_CTXREG_1 0x168034
2549 #define QM_REG_CTXREG_2 0x168038
2550 #define QM_REG_CTXREG_3 0x16803c
2551 /* [RW 12] The VOQ mask used to select the VOQs which needs to be full for
2553 #define QM_REG_ENBYPVOQMASK 0x16823c
2554 /* [RW 32] A bit mask per each physical queue. If a bit is set then the
2555 physical queue uses the byte credit; queues 31-0 */
2556 #define QM_REG_ENBYTECRD_LSB 0x168220
2557 /* [RW 32] A bit mask per each physical queue. If a bit is set then the
2558 physical queue uses the byte credit; queues 95-64 */
2559 #define QM_REG_ENBYTECRD_LSB_EXT_A 0x16e518
2560 /* [RW 32] A bit mask per each physical queue. If a bit is set then the
2561 physical queue uses the byte credit; queues 63-32 */
2562 #define QM_REG_ENBYTECRD_MSB 0x16821c
2563 /* [RW 32] A bit mask per each physical queue. If a bit is set then the
2564 physical queue uses the byte credit; queues 127-96 */
2565 #define QM_REG_ENBYTECRD_MSB_EXT_A 0x16e514
2566 /* [RW 4] If cleared then the secondary interface will not be served by the
2568 #define QM_REG_ENSEC 0x1680f0
2570 #define QM_REG_FUNCNUMSEL_LSB 0x168230
2572 #define QM_REG_FUNCNUMSEL_MSB 0x16822c
2573 /* [RW 32] A mask register to mask the Almost empty signals which will not
2574 be use for the almost empty indication to the HW block; queues 31:0 */
2575 #define QM_REG_HWAEMPTYMASK_LSB 0x168218
2576 /* [RW 32] A mask register to mask the Almost empty signals which will not
2577 be use for the almost empty indication to the HW block; queues 95-64 */
2578 #define QM_REG_HWAEMPTYMASK_LSB_EXT_A 0x16e510
2579 /* [RW 32] A mask register to mask the Almost empty signals which will not
2580 be use for the almost empty indication to the HW block; queues 63:32 */
2581 #define QM_REG_HWAEMPTYMASK_MSB 0x168214
2582 /* [RW 32] A mask register to mask the Almost empty signals which will not
2583 be use for the almost empty indication to the HW block; queues 127-96 */
2584 #define QM_REG_HWAEMPTYMASK_MSB_EXT_A 0x16e50c
2585 /* [RW 4] The number of outstanding request to CFC */
2586 #define QM_REG_OUTLDREQ 0x168804
2587 /* [RC 1] A flag to indicate that overflow error occurred in one of the
2589 #define QM_REG_OVFERROR 0x16805c
2590 /* [RC 7] the Q were the qverflow occurs */
2591 #define QM_REG_OVFQNUM 0x168058
2592 /* [R 16] Pause state for physical queues 15-0 */
2593 #define QM_REG_PAUSESTATE0 0x168410
2594 /* [R 16] Pause state for physical queues 31-16 */
2595 #define QM_REG_PAUSESTATE1 0x168414
2596 /* [R 16] Pause state for physical queues 47-32 */
2597 #define QM_REG_PAUSESTATE2 0x16e684
2598 /* [R 16] Pause state for physical queues 63-48 */
2599 #define QM_REG_PAUSESTATE3 0x16e688
2600 /* [R 16] Pause state for physical queues 79-64 */
2601 #define QM_REG_PAUSESTATE4 0x16e68c
2602 /* [R 16] Pause state for physical queues 95-80 */
2603 #define QM_REG_PAUSESTATE5 0x16e690
2604 /* [R 16] Pause state for physical queues 111-96 */
2605 #define QM_REG_PAUSESTATE6 0x16e694
2606 /* [R 16] Pause state for physical queues 127-112 */
2607 #define QM_REG_PAUSESTATE7 0x16e698
2608 /* [RW 2] The PCI attributes field used in the PCI request. */
2609 #define QM_REG_PCIREQAT 0x168054
2610 /* [R 16] The byte credit of port 0 */
2611 #define QM_REG_PORT0BYTECRD 0x168300
2612 /* [R 16] The byte credit of port 1 */
2613 #define QM_REG_PORT1BYTECRD 0x168304
2614 /* [RW 3] pci function number of queues 15-0 */
2615 #define QM_REG_PQ2PCIFUNC_0 0x16e6bc
2616 #define QM_REG_PQ2PCIFUNC_1 0x16e6c0
2617 #define QM_REG_PQ2PCIFUNC_2 0x16e6c4
2618 #define QM_REG_PQ2PCIFUNC_3 0x16e6c8
2619 #define QM_REG_PQ2PCIFUNC_4 0x16e6cc
2620 #define QM_REG_PQ2PCIFUNC_5 0x16e6d0
2621 #define QM_REG_PQ2PCIFUNC_6 0x16e6d4
2622 #define QM_REG_PQ2PCIFUNC_7 0x16e6d8
2623 /* [WB 54] Pointer Table Memory for queues 63-0; The mapping is as follow:
2624 ptrtbl[53:30] read pointer; ptrtbl[29:6] write pointer; ptrtbl[5:4] read
2625 bank0; ptrtbl[3:2] read bank 1; ptrtbl[1:0] write bank; */
2626 #define QM_REG_PTRTBL 0x168a00
2627 /* [WB 54] Pointer Table Memory for queues 127-64; The mapping is as follow:
2628 ptrtbl[53:30] read pointer; ptrtbl[29:6] write pointer; ptrtbl[5:4] read
2629 bank0; ptrtbl[3:2] read bank 1; ptrtbl[1:0] write bank; */
2630 #define QM_REG_PTRTBL_EXT_A 0x16e200
2631 /* [RW 2] Interrupt mask register #0 read/write */
2632 #define QM_REG_QM_INT_MASK 0x168444
2633 /* [R 2] Interrupt register #0 read */
2634 #define QM_REG_QM_INT_STS 0x168438
2635 /* [RW 12] Parity mask register #0 read/write */
2636 #define QM_REG_QM_PRTY_MASK 0x168454
2637 /* [R 12] Parity register #0 read */
2638 #define QM_REG_QM_PRTY_STS 0x168448
2639 /* [R 32] Current queues in pipeline: Queues from 32 to 63 */
2640 #define QM_REG_QSTATUS_HIGH 0x16802c
2641 /* [R 32] Current queues in pipeline: Queues from 96 to 127 */
2642 #define QM_REG_QSTATUS_HIGH_EXT_A 0x16e408
2643 /* [R 32] Current queues in pipeline: Queues from 0 to 31 */
2644 #define QM_REG_QSTATUS_LOW 0x168028
2645 /* [R 32] Current queues in pipeline: Queues from 64 to 95 */
2646 #define QM_REG_QSTATUS_LOW_EXT_A 0x16e404
2647 /* [R 24] The number of tasks queued for each queue; queues 63-0 */
2648 #define QM_REG_QTASKCTR_0 0x168308
2649 /* [R 24] The number of tasks queued for each queue; queues 127-64 */
2650 #define QM_REG_QTASKCTR_EXT_A_0 0x16e584
2651 /* [RW 4] Queue tied to VOQ */
2652 #define QM_REG_QVOQIDX_0 0x1680f4
2653 #define QM_REG_QVOQIDX_10 0x16811c
2654 #define QM_REG_QVOQIDX_100 0x16e49c
2655 #define QM_REG_QVOQIDX_101 0x16e4a0
2656 #define QM_REG_QVOQIDX_102 0x16e4a4
2657 #define QM_REG_QVOQIDX_103 0x16e4a8
2658 #define QM_REG_QVOQIDX_104 0x16e4ac
2659 #define QM_REG_QVOQIDX_105 0x16e4b0
2660 #define QM_REG_QVOQIDX_106 0x16e4b4
2661 #define QM_REG_QVOQIDX_107 0x16e4b8
2662 #define QM_REG_QVOQIDX_108 0x16e4bc
2663 #define QM_REG_QVOQIDX_109 0x16e4c0
2664 #define QM_REG_QVOQIDX_100 0x16e49c
2665 #define QM_REG_QVOQIDX_101 0x16e4a0
2666 #define QM_REG_QVOQIDX_102 0x16e4a4
2667 #define QM_REG_QVOQIDX_103 0x16e4a8
2668 #define QM_REG_QVOQIDX_104 0x16e4ac
2669 #define QM_REG_QVOQIDX_105 0x16e4b0
2670 #define QM_REG_QVOQIDX_106 0x16e4b4
2671 #define QM_REG_QVOQIDX_107 0x16e4b8
2672 #define QM_REG_QVOQIDX_108 0x16e4bc
2673 #define QM_REG_QVOQIDX_109 0x16e4c0
2674 #define QM_REG_QVOQIDX_11 0x168120
2675 #define QM_REG_QVOQIDX_110 0x16e4c4
2676 #define QM_REG_QVOQIDX_111 0x16e4c8
2677 #define QM_REG_QVOQIDX_112 0x16e4cc
2678 #define QM_REG_QVOQIDX_113 0x16e4d0
2679 #define QM_REG_QVOQIDX_114 0x16e4d4
2680 #define QM_REG_QVOQIDX_115 0x16e4d8
2681 #define QM_REG_QVOQIDX_116 0x16e4dc
2682 #define QM_REG_QVOQIDX_117 0x16e4e0
2683 #define QM_REG_QVOQIDX_118 0x16e4e4
2684 #define QM_REG_QVOQIDX_119 0x16e4e8
2685 #define QM_REG_QVOQIDX_110 0x16e4c4
2686 #define QM_REG_QVOQIDX_111 0x16e4c8
2687 #define QM_REG_QVOQIDX_112 0x16e4cc
2688 #define QM_REG_QVOQIDX_113 0x16e4d0
2689 #define QM_REG_QVOQIDX_114 0x16e4d4
2690 #define QM_REG_QVOQIDX_115 0x16e4d8
2691 #define QM_REG_QVOQIDX_116 0x16e4dc
2692 #define QM_REG_QVOQIDX_117 0x16e4e0
2693 #define QM_REG_QVOQIDX_118 0x16e4e4
2694 #define QM_REG_QVOQIDX_119 0x16e4e8
2695 #define QM_REG_QVOQIDX_12 0x168124
2696 #define QM_REG_QVOQIDX_120 0x16e4ec
2697 #define QM_REG_QVOQIDX_121 0x16e4f0
2698 #define QM_REG_QVOQIDX_122 0x16e4f4
2699 #define QM_REG_QVOQIDX_123 0x16e4f8
2700 #define QM_REG_QVOQIDX_124 0x16e4fc
2701 #define QM_REG_QVOQIDX_125 0x16e500
2702 #define QM_REG_QVOQIDX_126 0x16e504
2703 #define QM_REG_QVOQIDX_127 0x16e508
2704 #define QM_REG_QVOQIDX_120 0x16e4ec
2705 #define QM_REG_QVOQIDX_121 0x16e4f0
2706 #define QM_REG_QVOQIDX_122 0x16e4f4
2707 #define QM_REG_QVOQIDX_123 0x16e4f8
2708 #define QM_REG_QVOQIDX_124 0x16e4fc
2709 #define QM_REG_QVOQIDX_125 0x16e500
2710 #define QM_REG_QVOQIDX_126 0x16e504
2711 #define QM_REG_QVOQIDX_127 0x16e508
2712 #define QM_REG_QVOQIDX_13 0x168128
2713 #define QM_REG_QVOQIDX_14 0x16812c
2714 #define QM_REG_QVOQIDX_15 0x168130
2715 #define QM_REG_QVOQIDX_16 0x168134
2716 #define QM_REG_QVOQIDX_17 0x168138
2717 #define QM_REG_QVOQIDX_21 0x168148
2718 #define QM_REG_QVOQIDX_22 0x16814c
2719 #define QM_REG_QVOQIDX_23 0x168150
2720 #define QM_REG_QVOQIDX_24 0x168154
2721 #define QM_REG_QVOQIDX_25 0x168158
2722 #define QM_REG_QVOQIDX_26 0x16815c
2723 #define QM_REG_QVOQIDX_27 0x168160
2724 #define QM_REG_QVOQIDX_28 0x168164
2725 #define QM_REG_QVOQIDX_29 0x168168
2726 #define QM_REG_QVOQIDX_30 0x16816c
2727 #define QM_REG_QVOQIDX_31 0x168170
2728 #define QM_REG_QVOQIDX_32 0x168174
2729 #define QM_REG_QVOQIDX_33 0x168178
2730 #define QM_REG_QVOQIDX_34 0x16817c
2731 #define QM_REG_QVOQIDX_35 0x168180
2732 #define QM_REG_QVOQIDX_36 0x168184
2733 #define QM_REG_QVOQIDX_37 0x168188
2734 #define QM_REG_QVOQIDX_38 0x16818c
2735 #define QM_REG_QVOQIDX_39 0x168190
2736 #define QM_REG_QVOQIDX_40 0x168194
2737 #define QM_REG_QVOQIDX_41 0x168198
2738 #define QM_REG_QVOQIDX_42 0x16819c
2739 #define QM_REG_QVOQIDX_43 0x1681a0
2740 #define QM_REG_QVOQIDX_44 0x1681a4
2741 #define QM_REG_QVOQIDX_45 0x1681a8
2742 #define QM_REG_QVOQIDX_46 0x1681ac
2743 #define QM_REG_QVOQIDX_47 0x1681b0
2744 #define QM_REG_QVOQIDX_48 0x1681b4
2745 #define QM_REG_QVOQIDX_49 0x1681b8
2746 #define QM_REG_QVOQIDX_5 0x168108
2747 #define QM_REG_QVOQIDX_50 0x1681bc
2748 #define QM_REG_QVOQIDX_51 0x1681c0
2749 #define QM_REG_QVOQIDX_52 0x1681c4
2750 #define QM_REG_QVOQIDX_53 0x1681c8
2751 #define QM_REG_QVOQIDX_54 0x1681cc
2752 #define QM_REG_QVOQIDX_55 0x1681d0
2753 #define QM_REG_QVOQIDX_56 0x1681d4
2754 #define QM_REG_QVOQIDX_57 0x1681d8
2755 #define QM_REG_QVOQIDX_58 0x1681dc
2756 #define QM_REG_QVOQIDX_59 0x1681e0
2757 #define QM_REG_QVOQIDX_50 0x1681bc
2758 #define QM_REG_QVOQIDX_51 0x1681c0
2759 #define QM_REG_QVOQIDX_52 0x1681c4
2760 #define QM_REG_QVOQIDX_53 0x1681c8
2761 #define QM_REG_QVOQIDX_54 0x1681cc
2762 #define QM_REG_QVOQIDX_55 0x1681d0
2763 #define QM_REG_QVOQIDX_56 0x1681d4
2764 #define QM_REG_QVOQIDX_57 0x1681d8
2765 #define QM_REG_QVOQIDX_58 0x1681dc
2766 #define QM_REG_QVOQIDX_59 0x1681e0
2767 #define QM_REG_QVOQIDX_6 0x16810c
2768 #define QM_REG_QVOQIDX_60 0x1681e4
2769 #define QM_REG_QVOQIDX_61 0x1681e8
2770 #define QM_REG_QVOQIDX_62 0x1681ec
2771 #define QM_REG_QVOQIDX_63 0x1681f0
2772 #define QM_REG_QVOQIDX_64 0x16e40c
2773 #define QM_REG_QVOQIDX_65 0x16e410
2774 #define QM_REG_QVOQIDX_66 0x16e414
2775 #define QM_REG_QVOQIDX_67 0x16e418
2776 #define QM_REG_QVOQIDX_68 0x16e41c
2777 #define QM_REG_QVOQIDX_69 0x16e420
2778 #define QM_REG_QVOQIDX_60 0x1681e4
2779 #define QM_REG_QVOQIDX_61 0x1681e8
2780 #define QM_REG_QVOQIDX_62 0x1681ec
2781 #define QM_REG_QVOQIDX_63 0x1681f0
2782 #define QM_REG_QVOQIDX_64 0x16e40c
2783 #define QM_REG_QVOQIDX_65 0x16e410
2784 #define QM_REG_QVOQIDX_69 0x16e420
2785 #define QM_REG_QVOQIDX_7 0x168110
2786 #define QM_REG_QVOQIDX_70 0x16e424
2787 #define QM_REG_QVOQIDX_71 0x16e428
2788 #define QM_REG_QVOQIDX_72 0x16e42c
2789 #define QM_REG_QVOQIDX_73 0x16e430
2790 #define QM_REG_QVOQIDX_74 0x16e434
2791 #define QM_REG_QVOQIDX_75 0x16e438
2792 #define QM_REG_QVOQIDX_76 0x16e43c
2793 #define QM_REG_QVOQIDX_77 0x16e440
2794 #define QM_REG_QVOQIDX_78 0x16e444
2795 #define QM_REG_QVOQIDX_79 0x16e448
2796 #define QM_REG_QVOQIDX_70 0x16e424
2797 #define QM_REG_QVOQIDX_71 0x16e428
2798 #define QM_REG_QVOQIDX_72 0x16e42c
2799 #define QM_REG_QVOQIDX_73 0x16e430
2800 #define QM_REG_QVOQIDX_74 0x16e434
2801 #define QM_REG_QVOQIDX_75 0x16e438
2802 #define QM_REG_QVOQIDX_76 0x16e43c
2803 #define QM_REG_QVOQIDX_77 0x16e440
2804 #define QM_REG_QVOQIDX_78 0x16e444
2805 #define QM_REG_QVOQIDX_79 0x16e448
2806 #define QM_REG_QVOQIDX_8 0x168114
2807 #define QM_REG_QVOQIDX_80 0x16e44c
2808 #define QM_REG_QVOQIDX_81 0x16e450
2809 #define QM_REG_QVOQIDX_82 0x16e454
2810 #define QM_REG_QVOQIDX_83 0x16e458
2811 #define QM_REG_QVOQIDX_84 0x16e45c
2812 #define QM_REG_QVOQIDX_85 0x16e460
2813 #define QM_REG_QVOQIDX_86 0x16e464
2814 #define QM_REG_QVOQIDX_87 0x16e468
2815 #define QM_REG_QVOQIDX_88 0x16e46c
2816 #define QM_REG_QVOQIDX_89 0x16e470
2817 #define QM_REG_QVOQIDX_80 0x16e44c
2818 #define QM_REG_QVOQIDX_81 0x16e450
2819 #define QM_REG_QVOQIDX_85 0x16e460
2820 #define QM_REG_QVOQIDX_86 0x16e464
2821 #define QM_REG_QVOQIDX_87 0x16e468
2822 #define QM_REG_QVOQIDX_88 0x16e46c
2823 #define QM_REG_QVOQIDX_89 0x16e470
2824 #define QM_REG_QVOQIDX_9 0x168118
2825 #define QM_REG_QVOQIDX_90 0x16e474
2826 #define QM_REG_QVOQIDX_91 0x16e478
2827 #define QM_REG_QVOQIDX_92 0x16e47c
2828 #define QM_REG_QVOQIDX_93 0x16e480
2829 #define QM_REG_QVOQIDX_94 0x16e484
2830 #define QM_REG_QVOQIDX_95 0x16e488
2831 #define QM_REG_QVOQIDX_96 0x16e48c
2832 #define QM_REG_QVOQIDX_97 0x16e490
2833 #define QM_REG_QVOQIDX_98 0x16e494
2834 #define QM_REG_QVOQIDX_99 0x16e498
2835 #define QM_REG_QVOQIDX_90 0x16e474
2836 #define QM_REG_QVOQIDX_91 0x16e478
2837 #define QM_REG_QVOQIDX_92 0x16e47c
2838 #define QM_REG_QVOQIDX_93 0x16e480
2839 #define QM_REG_QVOQIDX_94 0x16e484
2840 #define QM_REG_QVOQIDX_95 0x16e488
2841 #define QM_REG_QVOQIDX_96 0x16e48c
2842 #define QM_REG_QVOQIDX_97 0x16e490
2843 #define QM_REG_QVOQIDX_98 0x16e494
2844 #define QM_REG_QVOQIDX_99 0x16e498
2845 /* [RW 1] Initialization bit command */
2846 #define QM_REG_SOFT_RESET 0x168428
2847 /* [RW 8] The credit cost per every task in the QM. A value per each VOQ */
2848 #define QM_REG_TASKCRDCOST_0 0x16809c
2849 #define QM_REG_TASKCRDCOST_1 0x1680a0
2850 #define QM_REG_TASKCRDCOST_10 0x1680c4
2851 #define QM_REG_TASKCRDCOST_11 0x1680c8
2852 #define QM_REG_TASKCRDCOST_2 0x1680a4
2853 #define QM_REG_TASKCRDCOST_4 0x1680ac
2854 #define QM_REG_TASKCRDCOST_5 0x1680b0
2855 /* [R 6] Keep the fill level of the fifo from write client 3 */
2856 #define QM_REG_TQM_WRC_FIFOLVL 0x168010
2857 /* [R 6] Keep the fill level of the fifo from write client 2 */
2858 #define QM_REG_UQM_WRC_FIFOLVL 0x168008
2859 /* [RC 32] Credit update error register */
2860 #define QM_REG_VOQCRDERRREG 0x168408
2861 /* [R 16] The credit value for each VOQ */
2862 #define QM_REG_VOQCREDIT_0 0x1682d0
2863 #define QM_REG_VOQCREDIT_1 0x1682d4
2864 #define QM_REG_VOQCREDIT_10 0x1682f8
2865 #define QM_REG_VOQCREDIT_11 0x1682fc
2866 #define QM_REG_VOQCREDIT_4 0x1682e0
2867 /* [RW 16] The credit value that if above the QM is considered almost full */
2868 #define QM_REG_VOQCREDITAFULLTHR 0x168090
2869 /* [RW 16] The init and maximum credit for each VoQ */
2870 #define QM_REG_VOQINITCREDIT_0 0x168060
2871 #define QM_REG_VOQINITCREDIT_1 0x168064
2872 #define QM_REG_VOQINITCREDIT_10 0x168088
2873 #define QM_REG_VOQINITCREDIT_11 0x16808c
2874 #define QM_REG_VOQINITCREDIT_2 0x168068
2875 #define QM_REG_VOQINITCREDIT_4 0x168070
2876 #define QM_REG_VOQINITCREDIT_5 0x168074
2877 /* [RW 1] The port of which VOQ belongs */
2878 #define QM_REG_VOQPORT_0 0x1682a0
2879 #define QM_REG_VOQPORT_1 0x1682a4
2880 #define QM_REG_VOQPORT_10 0x1682c8
2881 #define QM_REG_VOQPORT_11 0x1682cc
2882 #define QM_REG_VOQPORT_2 0x1682a8
2883 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
2884 #define QM_REG_VOQQMASK_0_LSB 0x168240
2885 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
2886 #define QM_REG_VOQQMASK_0_LSB_EXT_A 0x16e524
2887 /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
2888 #define QM_REG_VOQQMASK_0_MSB 0x168244
2889 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
2890 #define QM_REG_VOQQMASK_0_MSB_EXT_A 0x16e528
2891 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
2892 #define QM_REG_VOQQMASK_10_LSB 0x168290
2893 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
2894 #define QM_REG_VOQQMASK_10_LSB_EXT_A 0x16e574
2895 /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
2896 #define QM_REG_VOQQMASK_10_MSB 0x168294
2897 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
2898 #define QM_REG_VOQQMASK_10_MSB_EXT_A 0x16e578
2899 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
2900 #define QM_REG_VOQQMASK_11_LSB 0x168298
2901 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
2902 #define QM_REG_VOQQMASK_11_LSB_EXT_A 0x16e57c
2903 /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
2904 #define QM_REG_VOQQMASK_11_MSB 0x16829c
2905 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
2906 #define QM_REG_VOQQMASK_11_MSB_EXT_A 0x16e580
2907 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
2908 #define QM_REG_VOQQMASK_1_LSB 0x168248
2909 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
2910 #define QM_REG_VOQQMASK_1_LSB_EXT_A 0x16e52c
2911 /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
2912 #define QM_REG_VOQQMASK_1_MSB 0x16824c
2913 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
2914 #define QM_REG_VOQQMASK_1_MSB_EXT_A 0x16e530
2915 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
2916 #define QM_REG_VOQQMASK_2_LSB 0x168250
2917 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
2918 #define QM_REG_VOQQMASK_2_LSB_EXT_A 0x16e534
2919 /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
2920 #define QM_REG_VOQQMASK_2_MSB 0x168254
2921 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
2922 #define QM_REG_VOQQMASK_2_MSB_EXT_A 0x16e538
2923 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
2924 #define QM_REG_VOQQMASK_3_LSB 0x168258
2925 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
2926 #define QM_REG_VOQQMASK_3_LSB_EXT_A 0x16e53c
2927 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
2928 #define QM_REG_VOQQMASK_3_MSB_EXT_A 0x16e540
2929 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
2930 #define QM_REG_VOQQMASK_4_LSB 0x168260
2931 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
2932 #define QM_REG_VOQQMASK_4_LSB_EXT_A 0x16e544
2933 /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
2934 #define QM_REG_VOQQMASK_4_MSB 0x168264
2935 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
2936 #define QM_REG_VOQQMASK_4_MSB_EXT_A 0x16e548
2937 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
2938 #define QM_REG_VOQQMASK_5_LSB 0x168268
2939 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
2940 #define QM_REG_VOQQMASK_5_LSB_EXT_A 0x16e54c
2941 /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
2942 #define QM_REG_VOQQMASK_5_MSB 0x16826c
2943 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
2944 #define QM_REG_VOQQMASK_5_MSB_EXT_A 0x16e550
2945 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
2946 #define QM_REG_VOQQMASK_6_LSB 0x168270
2947 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
2948 #define QM_REG_VOQQMASK_6_LSB_EXT_A 0x16e554
2949 /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
2950 #define QM_REG_VOQQMASK_6_MSB 0x168274
2951 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
2952 #define QM_REG_VOQQMASK_6_MSB_EXT_A 0x16e558
2953 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
2954 #define QM_REG_VOQQMASK_7_LSB 0x168278
2955 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
2956 #define QM_REG_VOQQMASK_7_LSB_EXT_A 0x16e55c
2957 /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
2958 #define QM_REG_VOQQMASK_7_MSB 0x16827c
2959 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
2960 #define QM_REG_VOQQMASK_7_MSB_EXT_A 0x16e560
2961 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
2962 #define QM_REG_VOQQMASK_8_LSB 0x168280
2963 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
2964 #define QM_REG_VOQQMASK_8_LSB_EXT_A 0x16e564
2965 /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
2966 #define QM_REG_VOQQMASK_8_MSB 0x168284
2967 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
2968 #define QM_REG_VOQQMASK_8_MSB_EXT_A 0x16e568
2969 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
2970 #define QM_REG_VOQQMASK_9_LSB 0x168288
2971 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
2972 #define QM_REG_VOQQMASK_9_LSB_EXT_A 0x16e56c
2973 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
2974 #define QM_REG_VOQQMASK_9_MSB_EXT_A 0x16e570
2975 /* [RW 32] Wrr weights */
2976 #define QM_REG_WRRWEIGHTS_0 0x16880c
2977 #define QM_REG_WRRWEIGHTS_1 0x168810
2978 #define QM_REG_WRRWEIGHTS_10 0x168814
2979 #define QM_REG_WRRWEIGHTS_10_SIZE 1
2980 /* [RW 32] Wrr weights */
2981 #define QM_REG_WRRWEIGHTS_11 0x168818
2982 #define QM_REG_WRRWEIGHTS_11_SIZE 1
2983 /* [RW 32] Wrr weights */
2984 #define QM_REG_WRRWEIGHTS_12 0x16881c
2985 #define QM_REG_WRRWEIGHTS_12_SIZE 1
2986 /* [RW 32] Wrr weights */
2987 #define QM_REG_WRRWEIGHTS_13 0x168820
2988 #define QM_REG_WRRWEIGHTS_13_SIZE 1
2989 /* [RW 32] Wrr weights */
2990 #define QM_REG_WRRWEIGHTS_14 0x168824
2991 #define QM_REG_WRRWEIGHTS_14_SIZE 1
2992 /* [RW 32] Wrr weights */
2993 #define QM_REG_WRRWEIGHTS_15 0x168828
2994 #define QM_REG_WRRWEIGHTS_15_SIZE 1
2995 /* [RW 32] Wrr weights */
2996 #define QM_REG_WRRWEIGHTS_16 0x16e000
2997 #define QM_REG_WRRWEIGHTS_16_SIZE 1
2998 /* [RW 32] Wrr weights */
2999 #define QM_REG_WRRWEIGHTS_17 0x16e004
3000 #define QM_REG_WRRWEIGHTS_17_SIZE 1
3001 /* [RW 32] Wrr weights */
3002 #define QM_REG_WRRWEIGHTS_18 0x16e008
3003 #define QM_REG_WRRWEIGHTS_18_SIZE 1
3004 /* [RW 32] Wrr weights */
3005 #define QM_REG_WRRWEIGHTS_19 0x16e00c
3006 #define QM_REG_WRRWEIGHTS_19_SIZE 1
3007 /* [RW 32] Wrr weights */
3008 #define QM_REG_WRRWEIGHTS_10 0x168814
3009 #define QM_REG_WRRWEIGHTS_11 0x168818
3010 #define QM_REG_WRRWEIGHTS_12 0x16881c
3011 #define QM_REG_WRRWEIGHTS_13 0x168820
3012 #define QM_REG_WRRWEIGHTS_14 0x168824
3013 #define QM_REG_WRRWEIGHTS_15 0x168828
3014 #define QM_REG_WRRWEIGHTS_16 0x16e000
3015 #define QM_REG_WRRWEIGHTS_17 0x16e004
3016 #define QM_REG_WRRWEIGHTS_18 0x16e008
3017 #define QM_REG_WRRWEIGHTS_19 0x16e00c
3018 #define QM_REG_WRRWEIGHTS_2 0x16882c
3019 #define QM_REG_WRRWEIGHTS_20 0x16e010
3020 #define QM_REG_WRRWEIGHTS_20_SIZE 1
3021 /* [RW 32] Wrr weights */
3022 #define QM_REG_WRRWEIGHTS_21 0x16e014
3023 #define QM_REG_WRRWEIGHTS_21_SIZE 1
3024 /* [RW 32] Wrr weights */
3025 #define QM_REG_WRRWEIGHTS_22 0x16e018
3026 #define QM_REG_WRRWEIGHTS_22_SIZE 1
3027 /* [RW 32] Wrr weights */
3028 #define QM_REG_WRRWEIGHTS_23 0x16e01c
3029 #define QM_REG_WRRWEIGHTS_23_SIZE 1
3030 /* [RW 32] Wrr weights */
3031 #define QM_REG_WRRWEIGHTS_24 0x16e020
3032 #define QM_REG_WRRWEIGHTS_24_SIZE 1
3033 /* [RW 32] Wrr weights */
3034 #define QM_REG_WRRWEIGHTS_25 0x16e024
3035 #define QM_REG_WRRWEIGHTS_25_SIZE 1
3036 /* [RW 32] Wrr weights */
3037 #define QM_REG_WRRWEIGHTS_26 0x16e028
3038 #define QM_REG_WRRWEIGHTS_26_SIZE 1
3039 /* [RW 32] Wrr weights */
3040 #define QM_REG_WRRWEIGHTS_27 0x16e02c
3041 #define QM_REG_WRRWEIGHTS_27_SIZE 1
3042 /* [RW 32] Wrr weights */
3043 #define QM_REG_WRRWEIGHTS_28 0x16e030
3044 #define QM_REG_WRRWEIGHTS_28_SIZE 1
3045 /* [RW 32] Wrr weights */
3046 #define QM_REG_WRRWEIGHTS_29 0x16e034
3047 #define QM_REG_WRRWEIGHTS_29_SIZE 1
3048 /* [RW 32] Wrr weights */
3049 #define QM_REG_WRRWEIGHTS_20 0x16e010
3050 #define QM_REG_WRRWEIGHTS_21 0x16e014
3051 #define QM_REG_WRRWEIGHTS_22 0x16e018
3052 #define QM_REG_WRRWEIGHTS_23 0x16e01c
3053 #define QM_REG_WRRWEIGHTS_24 0x16e020
3054 #define QM_REG_WRRWEIGHTS_25 0x16e024
3055 #define QM_REG_WRRWEIGHTS_26 0x16e028
3056 #define QM_REG_WRRWEIGHTS_27 0x16e02c
3057 #define QM_REG_WRRWEIGHTS_28 0x16e030
3058 #define QM_REG_WRRWEIGHTS_29 0x16e034
3059 #define QM_REG_WRRWEIGHTS_3 0x168830
3060 #define QM_REG_WRRWEIGHTS_30 0x16e038
3061 #define QM_REG_WRRWEIGHTS_30_SIZE 1
3062 /* [RW 32] Wrr weights */
3063 #define QM_REG_WRRWEIGHTS_31 0x16e03c
3064 #define QM_REG_WRRWEIGHTS_31_SIZE 1
3065 /* [RW 32] Wrr weights */
3066 #define QM_REG_WRRWEIGHTS_30 0x16e038
3067 #define QM_REG_WRRWEIGHTS_31 0x16e03c
3068 #define QM_REG_WRRWEIGHTS_4 0x168834
3069 #define QM_REG_WRRWEIGHTS_5 0x168838
3070 #define QM_REG_WRRWEIGHTS_6 0x16883c
3071 #define QM_REG_WRRWEIGHTS_7 0x168840
3072 #define QM_REG_WRRWEIGHTS_8 0x168844
3073 #define QM_REG_WRRWEIGHTS_9 0x168848
3074 /* [R 6] Keep the fill level of the fifo from write client 1 */
3075 #define QM_REG_XQM_WRC_FIFOLVL 0x168000
3076 #define BRB1_BRB1_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
3077 #define BRB1_BRB1_INT_STS_REG_ADDRESS_ERROR_SIZE 0
3078 #define BRB1_BRB1_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
3079 #define BRB1_BRB1_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
3080 #define BRB1_BRB1_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
3081 #define BRB1_BRB1_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
3082 #define BRB1_BRB1_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
3083 #define BRB1_BRB1_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
3084 #define CCM_CCM_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
3085 #define CCM_CCM_INT_STS_REG_ADDRESS_ERROR_SIZE 0
3086 #define CCM_CCM_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
3087 #define CCM_CCM_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
3088 #define CCM_CCM_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
3089 #define CCM_CCM_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
3090 #define CCM_CCM_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
3091 #define CCM_CCM_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
3092 #define CDU_CDU_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
3093 #define CDU_CDU_INT_STS_REG_ADDRESS_ERROR_SIZE 0
3094 #define CDU_CDU_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
3095 #define CDU_CDU_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
3096 #define CDU_CDU_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
3097 #define CDU_CDU_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
3098 #define CDU_CDU_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
3099 #define CDU_CDU_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
3100 #define CFC_CFC_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
3101 #define CFC_CFC_INT_STS_REG_ADDRESS_ERROR_SIZE 0
3102 #define CFC_CFC_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
3103 #define CFC_CFC_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
3104 #define CFC_CFC_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
3105 #define CFC_CFC_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
3106 #define CFC_CFC_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
3107 #define CFC_CFC_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
3108 #define CSDM_CSDM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
3109 #define CSDM_CSDM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
3110 #define CSDM_CSDM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
3111 #define CSDM_CSDM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0
3112 #define CSDM_CSDM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0)
3113 #define CSDM_CSDM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
3114 #define CSDM_CSDM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
3115 #define CSDM_CSDM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
3116 #define CSEM_CSEM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
3117 #define CSEM_CSEM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
3118 #define CSEM_CSEM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
3119 #define CSEM_CSEM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0
3120 #define CSEM_CSEM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0)
3121 #define CSEM_CSEM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
3122 #define CSEM_CSEM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
3123 #define CSEM_CSEM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
3124 #define DBG_DBG_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
3125 #define DBG_DBG_INT_STS_REG_ADDRESS_ERROR_SIZE 0
3126 #define DBG_DBG_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
3127 #define DBG_DBG_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
3128 #define DBG_DBG_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
3129 #define DBG_DBG_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
3130 #define DBG_DBG_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
3131 #define DBG_DBG_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
3132 #define DMAE_DMAE_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
3133 #define DMAE_DMAE_INT_STS_REG_ADDRESS_ERROR_SIZE 0
3134 #define DMAE_DMAE_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
3135 #define DMAE_DMAE_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
3136 #define DMAE_DMAE_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
3137 #define DMAE_DMAE_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
3138 #define DMAE_DMAE_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
3139 #define DMAE_DMAE_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
3140 #define DORQ_DORQ_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
3141 #define DORQ_DORQ_INT_STS_REG_ADDRESS_ERROR_SIZE 0
3142 #define DORQ_DORQ_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
3143 #define DORQ_DORQ_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
3144 #define DORQ_DORQ_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
3145 #define DORQ_DORQ_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
3146 #define DORQ_DORQ_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
3147 #define DORQ_DORQ_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
3148 #define HC_HC_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
3149 #define HC_HC_INT_STS_REG_ADDRESS_ERROR_SIZE 0
3150 #define HC_HC_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
3151 #define HC_HC_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
3152 #define HC_HC_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
3153 #define HC_HC_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
3154 #define HC_HC_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
3155 #define HC_HC_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
3156 #define MISC_MISC_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
3157 #define MISC_MISC_INT_STS_REG_ADDRESS_ERROR_SIZE 0
3158 #define MISC_MISC_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
3159 #define MISC_MISC_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
3160 #define MISC_MISC_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
3161 #define MISC_MISC_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
3162 #define MISC_MISC_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
3163 #define MISC_MISC_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
3164 #define NIG_NIG_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
3165 #define NIG_NIG_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
3166 #define NIG_NIG_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
3167 #define NIG_NIG_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0
3168 #define NIG_NIG_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0)
3169 #define NIG_NIG_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
3170 #define NIG_NIG_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
3171 #define NIG_NIG_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
3172 #define PBF_PBF_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
3173 #define PBF_PBF_INT_STS_REG_ADDRESS_ERROR_SIZE 0
3174 #define PBF_PBF_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
3175 #define PBF_PBF_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
3176 #define PBF_PBF_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
3177 #define PBF_PBF_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
3178 #define PBF_PBF_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
3179 #define PBF_PBF_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
3180 #define PB_PB_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
3181 #define PB_PB_INT_STS_REG_ADDRESS_ERROR_SIZE 0
3182 #define PB_PB_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
3183 #define PB_PB_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
3184 #define PB_PB_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
3185 #define PB_PB_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
3186 #define PB_PB_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
3187 #define PB_PB_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
3188 #define PRS_PRS_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
3189 #define PRS_PRS_INT_STS_REG_ADDRESS_ERROR_SIZE 0
3190 #define PRS_PRS_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
3191 #define PRS_PRS_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
3192 #define PRS_PRS_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
3193 #define PRS_PRS_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
3194 #define PRS_PRS_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
3195 #define PRS_PRS_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
3196 #define PXP2_PXP2_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
3197 #define PXP2_PXP2_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
3198 #define PXP2_PXP2_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
3199 #define PXP2_PXP2_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0
3200 #define PXP2_PXP2_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0)
3201 #define PXP2_PXP2_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
3202 #define PXP2_PXP2_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
3203 #define PXP2_PXP2_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
3204 #define PXP_PXP_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
3205 #define PXP_PXP_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
3206 #define PXP_PXP_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
3207 #define PXP_PXP_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0
3208 #define PXP_PXP_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0)
3209 #define PXP_PXP_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
3210 #define PXP_PXP_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
3211 #define PXP_PXP_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
3212 #define QM_QM_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
3213 #define QM_QM_INT_STS_REG_ADDRESS_ERROR_SIZE 0
3214 #define QM_QM_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
3215 #define QM_QM_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
3216 #define QM_QM_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
3217 #define QM_QM_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
3218 #define QM_QM_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
3219 #define QM_QM_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
3220 #define SEM_FAST_SEM_FAST_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
3221 #define SEM_FAST_SEM_FAST_INT_STS_REG_ADDRESS_ERROR_SIZE 0
3222 #define SEM_FAST_SEM_FAST_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
3223 #define SEM_FAST_SEM_FAST_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
3224 #define SEM_FAST_SEM_FAST_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
3225 #define SEM_FAST_SEM_FAST_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
3226 #define SEM_FAST_SEM_FAST_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
3227 #define SEM_FAST_SEM_FAST_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
3228 #define SRC_SRC_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
3229 #define SRC_SRC_INT_STS_REG_ADDRESS_ERROR_SIZE 0
3230 #define SRC_SRC_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
3231 #define SRC_SRC_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
3232 #define SRC_SRC_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
3233 #define SRC_SRC_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
3234 #define SRC_SRC_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
3235 #define SRC_SRC_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
3236 #define TCM_TCM_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
3237 #define TCM_TCM_INT_STS_REG_ADDRESS_ERROR_SIZE 0
3238 #define TCM_TCM_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
3239 #define TCM_TCM_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
3240 #define TCM_TCM_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
3241 #define TCM_TCM_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
3242 #define TCM_TCM_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
3243 #define TCM_TCM_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
3244 #define TM_TM_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
3245 #define TM_TM_INT_STS_REG_ADDRESS_ERROR_SIZE 0
3246 #define TM_TM_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
3247 #define TM_TM_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
3248 #define TM_TM_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
3249 #define TM_TM_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
3250 #define TM_TM_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
3251 #define TM_TM_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
3252 #define TSDM_TSDM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
3253 #define TSDM_TSDM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
3254 #define TSDM_TSDM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
3255 #define TSDM_TSDM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0
3256 #define TSDM_TSDM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0)
3257 #define TSDM_TSDM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
3258 #define TSDM_TSDM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
3259 #define TSDM_TSDM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
3260 #define TSEM_TSEM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
3261 #define TSEM_TSEM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
3262 #define TSEM_TSEM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
3263 #define TSEM_TSEM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0
3264 #define TSEM_TSEM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0)
3265 #define TSEM_TSEM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
3266 #define TSEM_TSEM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
3267 #define TSEM_TSEM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
3268 #define UCM_UCM_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
3269 #define UCM_UCM_INT_STS_REG_ADDRESS_ERROR_SIZE 0
3270 #define UCM_UCM_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
3271 #define UCM_UCM_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
3272 #define UCM_UCM_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
3273 #define UCM_UCM_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
3274 #define UCM_UCM_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
3275 #define UCM_UCM_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
3276 #define USDM_USDM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
3277 #define USDM_USDM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
3278 #define USDM_USDM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
3279 #define USDM_USDM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0
3280 #define USDM_USDM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0)
3281 #define USDM_USDM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
3282 #define USDM_USDM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
3283 #define USDM_USDM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
3284 #define USEM_USEM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
3285 #define USEM_USEM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
3286 #define USEM_USEM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
3287 #define USEM_USEM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0
3288 #define USEM_USEM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0)
3289 #define USEM_USEM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
3290 #define USEM_USEM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
3291 #define USEM_USEM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
3292 #define XCM_XCM_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
3293 #define XCM_XCM_INT_STS_REG_ADDRESS_ERROR_SIZE 0
3294 #define XCM_XCM_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
3295 #define XCM_XCM_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
3296 #define XCM_XCM_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
3297 #define XCM_XCM_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
3298 #define XCM_XCM_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
3299 #define XCM_XCM_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
3300 #define XSDM_XSDM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
3301 #define XSDM_XSDM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
3302 #define XSDM_XSDM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
3303 #define XSDM_XSDM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0
3304 #define XSDM_XSDM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0)
3305 #define XSDM_XSDM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
3306 #define XSDM_XSDM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
3307 #define XSDM_XSDM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
3308 #define XSEM_XSEM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
3309 #define XSEM_XSEM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
3310 #define XSEM_XSEM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
3311 #define XSEM_XSEM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0
3312 #define XSEM_XSEM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0)
3313 #define XSEM_XSEM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
3314 #define XSEM_XSEM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
3315 #define XSEM_XSEM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
3316 #define CFC_DEBUG1_REG_WRITE_AC (0x1<<4)
3317 #define CFC_DEBUG1_REG_WRITE_AC_SIZE 4
3318 /* [R 1] debug only: This bit indicates wheter indicates that external
3319 buffer was wrapped (oldest data was thrown); Relevant only when
3320 ~dbg_registers_debug_target=2 (PCI) & ~dbg_registers_full_mode=1 (wrap); */
3321 #define DBG_REG_WRAP_ON_EXT_BUFFER 0xc124
3322 #define DBG_REG_WRAP_ON_EXT_BUFFER_SIZE 1
3323 /* [R 1] debug only: This bit indicates wheter the internal buffer was
3324 wrapped (oldest data was thrown) Relevant only when
3325 ~dbg_registers_debug_target=0 (internal buffer) */
3326 #define DBG_REG_WRAP_ON_INT_BUFFER 0xc128
3327 #define DBG_REG_WRAP_ON_INT_BUFFER_SIZE 1
3328 #define QM_QM_PRTY_STS_REG_WRBUFF (0x1<<8)
3329 #define QM_QM_PRTY_STS_REG_WRBUFF_SIZE 8
3330 #define QM_QM_PRTY_STS_CLR_REG_WRBUFF (0x1<<8)
3331 #define QM_QM_PRTY_STS_CLR_REG_WRBUFF_SIZE 8
3332 #define QM_QM_PRTY_STS_WR_REG_WRBUFF (0x1<<8)
3333 #define QM_QM_PRTY_STS_WR_REG_WRBUFF_SIZE 8
3334 #define QM_QM_PRTY_MASK_REG_WRBUFF (0x1<<8)
3335 #define QM_QM_PRTY_MASK_REG_WRBUFF_SIZE 8
3336 /* [RW 32] Wrr weights */
3337 #define QM_REG_WRRWEIGHTS_0 0x16880c
3338 #define QM_REG_WRRWEIGHTS_0_SIZE 1
3339 /* [RW 32] Wrr weights */
3340 #define QM_REG_WRRWEIGHTS_1 0x168810
3341 #define QM_REG_WRRWEIGHTS_1_SIZE 1
3342 /* [RW 32] Wrr weights */
3343 #define QM_REG_WRRWEIGHTS_10 0x168814
3344 #define QM_REG_WRRWEIGHTS_10_SIZE 1
3345 /* [RW 32] Wrr weights */
3346 #define QM_REG_WRRWEIGHTS_11 0x168818
3347 #define QM_REG_WRRWEIGHTS_11_SIZE 1
3348 /* [RW 32] Wrr weights */
3349 #define QM_REG_WRRWEIGHTS_12 0x16881c
3350 #define QM_REG_WRRWEIGHTS_12_SIZE 1
3351 /* [RW 32] Wrr weights */
3352 #define QM_REG_WRRWEIGHTS_13 0x168820
3353 #define QM_REG_WRRWEIGHTS_13_SIZE 1
3354 /* [RW 32] Wrr weights */
3355 #define QM_REG_WRRWEIGHTS_14 0x168824
3356 #define QM_REG_WRRWEIGHTS_14_SIZE 1
3357 /* [RW 32] Wrr weights */
3358 #define QM_REG_WRRWEIGHTS_15 0x168828
3359 #define QM_REG_WRRWEIGHTS_15_SIZE 1
3360 /* [RW 32] Wrr weights */
3361 #define QM_REG_WRRWEIGHTS_2 0x16882c
3362 #define QM_REG_WRRWEIGHTS_2_SIZE 1
3363 /* [RW 32] Wrr weights */
3364 #define QM_REG_WRRWEIGHTS_3 0x168830
3365 #define QM_REG_WRRWEIGHTS_3_SIZE 1
3366 /* [RW 32] Wrr weights */
3367 #define QM_REG_WRRWEIGHTS_4 0x168834
3368 #define QM_REG_WRRWEIGHTS_4_SIZE 1
3369 /* [RW 32] Wrr weights */
3370 #define QM_REG_WRRWEIGHTS_5 0x168838
3371 #define QM_REG_WRRWEIGHTS_5_SIZE 1
3372 /* [RW 32] Wrr weights */
3373 #define QM_REG_WRRWEIGHTS_6 0x16883c
3374 #define QM_REG_WRRWEIGHTS_6_SIZE 1
3375 /* [RW 32] Wrr weights */
3376 #define QM_REG_WRRWEIGHTS_7 0x168840
3377 #define QM_REG_WRRWEIGHTS_7_SIZE 1
3378 /* [RW 32] Wrr weights */
3379 #define QM_REG_WRRWEIGHTS_8 0x168844
3380 #define QM_REG_WRRWEIGHTS_8_SIZE 1
3381 /* [RW 32] Wrr weights */
3382 #define QM_REG_WRRWEIGHTS_9 0x168848
3383 #define QM_REG_WRRWEIGHTS_9_SIZE 1
3384 /* [RW 32] Wrr weights */
3385 #define QM_REG_WRRWEIGHTS_16 0x16e000
3386 #define QM_REG_WRRWEIGHTS_16_SIZE 1
3387 /* [RW 32] Wrr weights */
3388 #define QM_REG_WRRWEIGHTS_17 0x16e004
3389 #define QM_REG_WRRWEIGHTS_17_SIZE 1
3390 /* [RW 32] Wrr weights */
3391 #define QM_REG_WRRWEIGHTS_18 0x16e008
3392 #define QM_REG_WRRWEIGHTS_18_SIZE 1
3393 /* [RW 32] Wrr weights */
3394 #define QM_REG_WRRWEIGHTS_19 0x16e00c
3395 #define QM_REG_WRRWEIGHTS_19_SIZE 1
3396 /* [RW 32] Wrr weights */
3397 #define QM_REG_WRRWEIGHTS_20 0x16e010
3398 #define QM_REG_WRRWEIGHTS_20_SIZE 1
3399 /* [RW 32] Wrr weights */
3400 #define QM_REG_WRRWEIGHTS_21 0x16e014
3401 #define QM_REG_WRRWEIGHTS_21_SIZE 1
3402 /* [RW 32] Wrr weights */
3403 #define QM_REG_WRRWEIGHTS_22 0x16e018
3404 #define QM_REG_WRRWEIGHTS_22_SIZE 1
3405 /* [RW 32] Wrr weights */
3406 #define QM_REG_WRRWEIGHTS_23 0x16e01c
3407 #define QM_REG_WRRWEIGHTS_23_SIZE 1
3408 /* [RW 32] Wrr weights */
3409 #define QM_REG_WRRWEIGHTS_24 0x16e020
3410 #define QM_REG_WRRWEIGHTS_24_SIZE 1
3411 /* [RW 32] Wrr weights */
3412 #define QM_REG_WRRWEIGHTS_25 0x16e024
3413 #define QM_REG_WRRWEIGHTS_25_SIZE 1
3414 /* [RW 32] Wrr weights */
3415 #define QM_REG_WRRWEIGHTS_26 0x16e028
3416 #define QM_REG_WRRWEIGHTS_26_SIZE 1
3417 /* [RW 32] Wrr weights */
3418 #define QM_REG_WRRWEIGHTS_27 0x16e02c
3419 #define QM_REG_WRRWEIGHTS_27_SIZE 1
3420 /* [RW 32] Wrr weights */
3421 #define QM_REG_WRRWEIGHTS_28 0x16e030
3422 #define QM_REG_WRRWEIGHTS_28_SIZE 1
3423 /* [RW 32] Wrr weights */
3424 #define QM_REG_WRRWEIGHTS_29 0x16e034
3425 #define QM_REG_WRRWEIGHTS_29_SIZE 1
3426 /* [RW 32] Wrr weights */
3427 #define QM_REG_WRRWEIGHTS_30 0x16e038
3428 #define QM_REG_WRRWEIGHTS_30_SIZE 1
3429 /* [RW 32] Wrr weights */
3430 #define QM_REG_WRRWEIGHTS_31 0x16e03c
3431 #define QM_REG_WRRWEIGHTS_31_SIZE 1
3432 #define SRC_REG_COUNTFREE0 0x40500
3433 /* [RW 1] If clr the searcher is compatible to E1 A0 - support only two
3434 ports. If set the searcher support 8 functions. */
3435 #define SRC_REG_E1HMF_ENABLE 0x404cc
3436 #define SRC_REG_FIRSTFREE0 0x40510
3437 #define SRC_REG_KEYRSS0_0 0x40408
3438 #define SRC_REG_KEYRSS0_7 0x40424
3439 #define SRC_REG_KEYRSS1_9 0x40454
3440 #define SRC_REG_LASTFREE0 0x40530
3441 #define SRC_REG_NUMBER_HASH_BITS0 0x40400
3442 /* [RW 1] Reset internal state machines. */
3443 #define SRC_REG_SOFT_RST 0x4049c
3444 /* [R 3] Interrupt register #0 read */
3445 #define SRC_REG_SRC_INT_STS 0x404ac
3446 /* [RW 3] Parity mask register #0 read/write */
3447 #define SRC_REG_SRC_PRTY_MASK 0x404c8
3448 /* [R 3] Parity register #0 read */
3449 #define SRC_REG_SRC_PRTY_STS 0x404bc
3450 /* [R 4] Used to read the value of the XX protection CAM occupancy counter. */
3451 #define TCM_REG_CAM_OCCUP 0x5017c
3452 /* [RW 1] CDU AG read Interface enable. If 0 - the request input is
3453 disregarded; valid output is deasserted; all other signals are treated as
3454 usual; if 1 - normal activity. */
3455 #define TCM_REG_CDU_AG_RD_IFEN 0x50034
3456 /* [RW 1] CDU AG write Interface enable. If 0 - the request and valid input
3457 are disregarded; all other signals are treated as usual; if 1 - normal
3459 #define TCM_REG_CDU_AG_WR_IFEN 0x50030
3460 /* [RW 1] CDU STORM read Interface enable. If 0 - the request input is
3461 disregarded; valid output is deasserted; all other signals are treated as
3462 usual; if 1 - normal activity. */
3463 #define TCM_REG_CDU_SM_RD_IFEN 0x5003c
3464 /* [RW 1] CDU STORM write Interface enable. If 0 - the request and valid
3465 input is disregarded; all other signals are treated as usual; if 1 -
3467 #define TCM_REG_CDU_SM_WR_IFEN 0x50038
3468 /* [RW 4] CFC output initial credit. Max credit available - 15.Write writes
3469 the initial credit value; read returns the current value of the credit
3470 counter. Must be initialized to 1 at start-up. */
3471 #define TCM_REG_CFC_INIT_CRD 0x50204
3472 /* [RW 3] The weight of the CP input in the WRR mechanism. 0 stands for
3473 weight 8 (the most prioritised); 1 stands for weight 1(least
3474 prioritised); 2 stands for weight 2; tc. */
3475 #define TCM_REG_CP_WEIGHT 0x500c0
3476 /* [RW 1] Input csem Interface enable. If 0 - the valid input is
3477 disregarded; acknowledge output is deasserted; all other signals are
3478 treated as usual; if 1 - normal activity. */
3479 #define TCM_REG_CSEM_IFEN 0x5002c
3480 /* [RC 1] Message length mismatch (relative to last indication) at the In#9
3482 #define TCM_REG_CSEM_LENGTH_MIS 0x50174
3483 /* [RW 8] The Event ID in case of ErrorFlg is set in the input message. */
3484 #define TCM_REG_ERR_EVNT_ID 0x500a0
3485 /* [RW 28] The CM erroneous header for QM and Timers formatting. */
3486 #define TCM_REG_ERR_TCM_HDR 0x5009c
3487 /* [RW 8] The Event ID for Timers expiration. */
3488 #define TCM_REG_EXPR_EVNT_ID 0x500a4
3489 /* [RW 8] FIC0 output initial credit. Max credit available - 255.Write
3490 writes the initial credit value; read returns the current value of the
3491 credit counter. Must be initialized to 64 at start-up. */
3492 #define TCM_REG_FIC0_INIT_CRD 0x5020c
3493 /* [RW 8] FIC1 output initial credit. Max credit available - 255.Write
3494 writes the initial credit value; read returns the current value of the
3495 credit counter. Must be initialized to 64 at start-up. */
3496 #define TCM_REG_FIC1_INIT_CRD 0x50210
3497 /* [RW 1] Arbitration between Input Arbiter groups: 0 - fair Round-Robin; 1
3498 - strict priority defined by ~tcm_registers_gr_ag_pr.gr_ag_pr;
3499 ~tcm_registers_gr_ld0_pr.gr_ld0_pr and
3500 ~tcm_registers_gr_ld1_pr.gr_ld1_pr. */
3501 #define TCM_REG_GR_ARB_TYPE 0x50114
3502 /* [RW 2] Load (FIC0) channel group priority. The lowest priority is 0; the
3503 highest priority is 3. It is supposed that the Store channel is the
3504 compliment of the other 3 groups. */
3505 #define TCM_REG_GR_LD0_PR 0x5011c
3506 /* [RW 2] Load (FIC1) channel group priority. The lowest priority is 0; the
3507 highest priority is 3. It is supposed that the Store channel is the
3508 compliment of the other 3 groups. */
3509 #define TCM_REG_GR_LD1_PR 0x50120
3510 /* [RW 4] The number of double REG-pairs; loaded from the STORM context and
3511 sent to STORM; for a specific connection type. The double REG-pairs are
3512 used to align to STORM context row size of 128 bits. The offset of these
3513 data in the STORM context is always 0. Index _i stands for the connection
3514 type (one of 16). */
3515 #define TCM_REG_N_SM_CTX_LD_0 0x50050
3516 #define TCM_REG_N_SM_CTX_LD_1 0x50054
3517 #define TCM_REG_N_SM_CTX_LD_10 0x50078
3518 #define TCM_REG_N_SM_CTX_LD_11 0x5007c
3519 #define TCM_REG_N_SM_CTX_LD_12 0x50080
3520 #define TCM_REG_N_SM_CTX_LD_13 0x50084
3521 #define TCM_REG_N_SM_CTX_LD_14 0x50088
3522 #define TCM_REG_N_SM_CTX_LD_15 0x5008c
3523 #define TCM_REG_N_SM_CTX_LD_2 0x50058
3524 #define TCM_REG_N_SM_CTX_LD_3 0x5005c
3525 #define TCM_REG_N_SM_CTX_LD_4 0x50060
3526 /* [RW 1] Input pbf Interface enable. If 0 - the valid input is disregarded;
3527 acknowledge output is deasserted; all other signals are treated as usual;
3528 if 1 - normal activity. */
3529 #define TCM_REG_PBF_IFEN 0x50024
3530 /* [RC 1] Message length mismatch (relative to last indication) at the In#7
3532 #define TCM_REG_PBF_LENGTH_MIS 0x5016c
3533 /* [RW 3] The weight of the input pbf in the WRR mechanism. 0 stands for
3534 weight 8 (the most prioritised); 1 stands for weight 1(least
3535 prioritised); 2 stands for weight 2; tc. */
3536 #define TCM_REG_PBF_WEIGHT 0x500b4
3537 #define TCM_REG_PHYS_QNUM0_0 0x500e0
3538 #define TCM_REG_PHYS_QNUM0_1 0x500e4
3539 #define TCM_REG_PHYS_QNUM1_0 0x500e8
3540 #define TCM_REG_PHYS_QNUM1_1 0x500ec
3541 #define TCM_REG_PHYS_QNUM2_0 0x500f0
3542 #define TCM_REG_PHYS_QNUM2_1 0x500f4
3543 #define TCM_REG_PHYS_QNUM3_0 0x500f8
3544 #define TCM_REG_PHYS_QNUM3_1 0x500fc
3545 /* [RW 1] Input prs Interface enable. If 0 - the valid input is disregarded;
3546 acknowledge output is deasserted; all other signals are treated as usual;
3547 if 1 - normal activity. */
3548 #define TCM_REG_PRS_IFEN 0x50020
3549 /* [RC 1] Message length mismatch (relative to last indication) at the In#6
3551 #define TCM_REG_PRS_LENGTH_MIS 0x50168
3552 /* [RW 3] The weight of the input prs in the WRR mechanism. 0 stands for
3553 weight 8 (the most prioritised); 1 stands for weight 1(least
3554 prioritised); 2 stands for weight 2; tc. */
3555 #define TCM_REG_PRS_WEIGHT 0x500b0
3556 /* [RW 8] The Event ID for Timers formatting in case of stop done. */
3557 #define TCM_REG_STOP_EVNT_ID 0x500a8
3558 /* [RC 1] Message length mismatch (relative to last indication) at the STORM
3560 #define TCM_REG_STORM_LENGTH_MIS 0x50160
3561 /* [RW 1] STORM - CM Interface enable. If 0 - the valid input is
3562 disregarded; acknowledge output is deasserted; all other signals are
3563 treated as usual; if 1 - normal activity. */
3564 #define TCM_REG_STORM_TCM_IFEN 0x50010
3565 /* [RW 1] CM - CFC Interface enable. If 0 - the valid input is disregarded;
3566 acknowledge output is deasserted; all other signals are treated as usual;
3567 if 1 - normal activity. */
3568 #define TCM_REG_TCM_CFC_IFEN 0x50040
3569 /* [RW 11] Interrupt mask register #0 read/write */
3570 #define TCM_REG_TCM_INT_MASK 0x501dc
3571 /* [R 11] Interrupt register #0 read */
3572 #define TCM_REG_TCM_INT_STS 0x501d0
3573 /* [R 27] Parity register #0 read */
3574 #define TCM_REG_TCM_PRTY_STS 0x501e0
3575 /* [RW 3] The size of AG context region 0 in REG-pairs. Designates the MS
3576 REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5).
3577 Is used to determine the number of the AG context REG-pairs written back;
3578 when the input message Reg1WbFlg isn't set. */
3579 #define TCM_REG_TCM_REG0_SZ 0x500d8
3580 /* [RW 1] CM - STORM 0 Interface enable. If 0 - the acknowledge input is
3581 disregarded; valid is deasserted; all other signals are treated as usual;
3582 if 1 - normal activity. */
3583 #define TCM_REG_TCM_STORM0_IFEN 0x50004
3584 /* [RW 1] CM - STORM 1 Interface enable. If 0 - the acknowledge input is
3585 disregarded; valid is deasserted; all other signals are treated as usual;
3586 if 1 - normal activity. */
3587 #define TCM_REG_TCM_STORM1_IFEN 0x50008
3588 /* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input is
3589 disregarded; valid is deasserted; all other signals are treated as usual;
3590 if 1 - normal activity. */
3591 #define TCM_REG_TCM_TQM_IFEN 0x5000c
3592 /* [RW 1] If set the Q index; received from the QM is inserted to event ID. */
3593 #define TCM_REG_TCM_TQM_USE_Q 0x500d4
3594 /* [RW 28] The CM header for Timers expiration command. */
3595 #define TCM_REG_TM_TCM_HDR 0x50098
3596 /* [RW 1] Timers - CM Interface enable. If 0 - the valid input is
3597 disregarded; acknowledge output is deasserted; all other signals are
3598 treated as usual; if 1 - normal activity. */
3599 #define TCM_REG_TM_TCM_IFEN 0x5001c
3600 /* [RW 6] QM output initial credit. Max credit available - 32.Write writes
3601 the initial credit value; read returns the current value of the credit
3602 counter. Must be initialized to 32 at start-up. */
3603 #define TCM_REG_TQM_INIT_CRD 0x5021c
3604 /* [RW 28] The CM header value for QM request (primary). */
3605 #define TCM_REG_TQM_TCM_HDR_P 0x50090
3606 /* [RW 28] The CM header value for QM request (secondary). */
3607 #define TCM_REG_TQM_TCM_HDR_S 0x50094
3608 /* [RW 1] QM - CM Interface enable. If 0 - the valid input is disregarded;
3609 acknowledge output is deasserted; all other signals are treated as usual;
3610 if 1 - normal activity. */
3611 #define TCM_REG_TQM_TCM_IFEN 0x50014
3612 /* [RW 1] Input SDM Interface enable. If 0 - the valid input is disregarded;
3613 acknowledge output is deasserted; all other signals are treated as usual;
3614 if 1 - normal activity. */
3615 #define TCM_REG_TSDM_IFEN 0x50018
3616 /* [RC 1] Message length mismatch (relative to last indication) at the SDM
3618 #define TCM_REG_TSDM_LENGTH_MIS 0x50164
3619 /* [RW 3] The weight of the SDM input in the WRR mechanism. 0 stands for
3620 weight 8 (the most prioritised); 1 stands for weight 1(least
3621 prioritised); 2 stands for weight 2; tc. */
3622 #define TCM_REG_TSDM_WEIGHT 0x500c4
3623 /* [RW 1] Input usem Interface enable. If 0 - the valid input is
3624 disregarded; acknowledge output is deasserted; all other signals are
3625 treated as usual; if 1 - normal activity. */
3626 #define TCM_REG_USEM_IFEN 0x50028
3627 /* [RC 1] Message length mismatch (relative to last indication) at the In#8
3629 #define TCM_REG_USEM_LENGTH_MIS 0x50170
3630 /* [RW 21] Indirect access to the descriptor table of the XX protection
3631 mechanism. The fields are: [5:0] - length of the message; 15:6] - message
3632 pointer; 20:16] - next pointer. */
3633 #define TCM_REG_XX_DESCR_TABLE 0x50280
3634 #define TCM_REG_XX_DESCR_TABLE_SIZE 32
3635 /* [R 6] Use to read the value of XX protection Free counter. */
3636 #define TCM_REG_XX_FREE 0x50178
3637 /* [RW 6] Initial value for the credit counter; responsible for fulfilling
3638 of the Input Stage XX protection buffer by the XX protection pending
3639 messages. Max credit available - 127.Write writes the initial credit
3640 value; read returns the current value of the credit counter. Must be
3641 initialized to 19 at start-up. */
3642 #define TCM_REG_XX_INIT_CRD 0x50220
3643 /* [RW 6] Maximum link list size (messages locked) per connection in the XX
3645 #define TCM_REG_XX_MAX_LL_SZ 0x50044
3646 /* [RW 6] The maximum number of pending messages; which may be stored in XX
3647 protection. ~tcm_registers_xx_free.xx_free is read on read. */
3648 #define TCM_REG_XX_MSG_NUM 0x50224
3649 /* [RW 8] The Event ID; sent to the STORM in case of XX overflow. */
3650 #define TCM_REG_XX_OVFL_EVNT_ID 0x50048
3651 /* [RW 16] Indirect access to the XX table of the XX protection mechanism.
3652 The fields are:[4:0] - tail pointer; [10:5] - Link List size; 15:11] -
3654 #define TCM_REG_XX_TABLE 0x50240
3655 /* [RW 4] Load value for for cfc ac credit cnt. */
3656 #define TM_REG_CFC_AC_CRDCNT_VAL 0x164208
3657 /* [RW 4] Load value for cfc cld credit cnt. */
3658 #define TM_REG_CFC_CLD_CRDCNT_VAL 0x164210
3659 /* [RW 8] Client0 context region. */
3660 #define TM_REG_CL0_CONT_REGION 0x164030
3661 /* [RW 8] Client1 context region. */
3662 #define TM_REG_CL1_CONT_REGION 0x164034
3663 /* [RW 8] Client2 context region. */
3664 #define TM_REG_CL2_CONT_REGION 0x164038
3665 /* [RW 2] Client in High priority client number. */
3666 #define TM_REG_CLIN_PRIOR0_CLIENT 0x164024
3667 /* [RW 4] Load value for clout0 cred cnt. */
3668 #define TM_REG_CLOUT_CRDCNT0_VAL 0x164220
3669 /* [RW 4] Load value for clout1 cred cnt. */
3670 #define TM_REG_CLOUT_CRDCNT1_VAL 0x164228
3671 /* [RW 4] Load value for clout2 cred cnt. */
3672 #define TM_REG_CLOUT_CRDCNT2_VAL 0x164230
3673 /* [RW 1] Enable client0 input. */
3674 #define TM_REG_EN_CL0_INPUT 0x164008
3675 /* [RW 1] Enable client1 input. */
3676 #define TM_REG_EN_CL1_INPUT 0x16400c
3677 /* [RW 1] Enable client2 input. */
3678 #define TM_REG_EN_CL2_INPUT 0x164010
3679 /* [RW 1] Enable real time counter. */
3680 #define TM_REG_EN_REAL_TIME_CNT 0x1640d8
3681 /* [RW 1] Enable for Timers state machines. */
3682 #define TM_REG_EN_TIMERS 0x164000
3683 /* [RW 4] Load value for expiration credit cnt. CFC max number of
3684 outstanding load requests for timers (expiration) context loading. */
3685 #define TM_REG_EXP_CRDCNT_VAL 0x164238
3686 /* [RW 18] Linear0 Max active cid (in banks of 32 entries). */
3687 #define TM_REG_LIN0_MAX_ACTIVE_CID 0x164048
3688 /* [WB 64] Linear0 phy address. */
3689 #define TM_REG_LIN0_PHY_ADDR 0x164270
3690 /* [RW 24] Linear0 array scan timeout. */
3691 #define TM_REG_LIN0_SCAN_TIME 0x16403c
3692 /* [WB 64] Linear1 phy address. */
3693 #define TM_REG_LIN1_PHY_ADDR 0x164280
3694 /* [RW 6] Linear timer set_clear fifo threshold. */
3695 #define TM_REG_LIN_SETCLR_FIFO_ALFULL_THR 0x164070
3696 /* [RW 2] Load value for pci arbiter credit cnt. */
3697 #define TM_REG_PCIARB_CRDCNT_VAL 0x164260
3698 /* [RW 1] Timer software reset - active high. */
3699 #define TM_REG_TIMER_SOFT_RST 0x164004
3700 /* [RW 20] The amount of hardware cycles for each timer tick. */
3701 #define TM_REG_TIMER_TICK_SIZE 0x16401c
3702 /* [RW 8] Timers Context region. */
3703 #define TM_REG_TM_CONTEXT_REGION 0x164044
3704 /* [RW 1] Interrupt mask register #0 read/write */
3705 #define TM_REG_TM_INT_MASK 0x1640fc
3706 /* [R 1] Interrupt register #0 read */
3707 #define TM_REG_TM_INT_STS 0x1640f0
3708 /* [RW 8] The event id for aggregated interrupt 0 */
3709 #define TSDM_REG_AGG_INT_EVENT_0 0x42038
3710 #define TSDM_REG_AGG_INT_EVENT_2 0x42040
3711 #define TSDM_REG_AGG_INT_EVENT_20 0x42088
3712 #define TSDM_REG_AGG_INT_EVENT_21 0x4208c
3713 #define TSDM_REG_AGG_INT_EVENT_22 0x42090
3714 #define TSDM_REG_AGG_INT_EVENT_23 0x42094
3715 #define TSDM_REG_AGG_INT_EVENT_24 0x42098
3716 #define TSDM_REG_AGG_INT_EVENT_25 0x4209c
3717 #define TSDM_REG_AGG_INT_EVENT_26 0x420a0
3718 #define TSDM_REG_AGG_INT_EVENT_27 0x420a4
3719 #define TSDM_REG_AGG_INT_EVENT_28 0x420a8
3720 #define TSDM_REG_AGG_INT_EVENT_29 0x420ac
3721 #define TSDM_REG_AGG_INT_EVENT_3 0x42044
3722 #define TSDM_REG_AGG_INT_EVENT_30 0x420b0
3723 #define TSDM_REG_AGG_INT_EVENT_31 0x420b4
3724 #define TSDM_REG_AGG_INT_EVENT_4 0x42048
3725 /* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */
3726 #define TSDM_REG_CFC_RSP_START_ADDR 0x42008
3727 /* [RW 16] The maximum value of the competion counter #0 */
3728 #define TSDM_REG_CMP_COUNTER_MAX0 0x4201c
3729 /* [RW 16] The maximum value of the competion counter #1 */
3730 #define TSDM_REG_CMP_COUNTER_MAX1 0x42020
3731 /* [RW 16] The maximum value of the competion counter #2 */
3732 #define TSDM_REG_CMP_COUNTER_MAX2 0x42024
3733 /* [RW 16] The maximum value of the competion counter #3 */
3734 #define TSDM_REG_CMP_COUNTER_MAX3 0x42028
3735 /* [RW 13] The start address in the internal RAM for the completion
3737 #define TSDM_REG_CMP_COUNTER_START_ADDR 0x4200c
3738 #define TSDM_REG_ENABLE_IN1 0x42238
3739 #define TSDM_REG_ENABLE_IN2 0x4223c
3740 #define TSDM_REG_ENABLE_OUT1 0x42240
3741 #define TSDM_REG_ENABLE_OUT2 0x42244
3742 /* [RW 4] The initial number of messages that can be sent to the pxp control
3743 interface without receiving any ACK. */
3744 #define TSDM_REG_INIT_CREDIT_PXP_CTRL 0x424bc
3745 /* [ST 32] The number of ACK after placement messages received */
3746 #define TSDM_REG_NUM_OF_ACK_AFTER_PLACE 0x4227c
3747 /* [ST 32] The number of packet end messages received from the parser */
3748 #define TSDM_REG_NUM_OF_PKT_END_MSG 0x42274
3749 /* [ST 32] The number of requests received from the pxp async if */
3750 #define TSDM_REG_NUM_OF_PXP_ASYNC_REQ 0x42278
3751 /* [ST 32] The number of commands received in queue 0 */
3752 #define TSDM_REG_NUM_OF_Q0_CMD 0x42248
3753 /* [ST 32] The number of commands received in queue 10 */
3754 #define TSDM_REG_NUM_OF_Q10_CMD 0x4226c
3755 /* [ST 32] The number of commands received in queue 11 */
3756 #define TSDM_REG_NUM_OF_Q11_CMD 0x42270
3757 /* [ST 32] The number of commands received in queue 1 */
3758 #define TSDM_REG_NUM_OF_Q1_CMD 0x4224c
3759 /* [ST 32] The number of commands received in queue 3 */
3760 #define TSDM_REG_NUM_OF_Q3_CMD 0x42250
3761 /* [ST 32] The number of commands received in queue 4 */
3762 #define TSDM_REG_NUM_OF_Q4_CMD 0x42254
3763 /* [ST 32] The number of commands received in queue 5 */
3764 #define TSDM_REG_NUM_OF_Q5_CMD 0x42258
3765 /* [ST 32] The number of commands received in queue 6 */
3766 #define TSDM_REG_NUM_OF_Q6_CMD 0x4225c
3767 /* [ST 32] The number of commands received in queue 7 */
3768 #define TSDM_REG_NUM_OF_Q7_CMD 0x42260
3769 /* [ST 32] The number of commands received in queue 8 */
3770 #define TSDM_REG_NUM_OF_Q8_CMD 0x42264
3771 /* [ST 32] The number of commands received in queue 9 */
3772 #define TSDM_REG_NUM_OF_Q9_CMD 0x42268
3773 /* [RW 13] The start address in the internal RAM for the packet end message */
3774 #define TSDM_REG_PCK_END_MSG_START_ADDR 0x42014
3775 /* [RW 13] The start address in the internal RAM for queue counters */
3776 #define TSDM_REG_Q_COUNTER_START_ADDR 0x42010
3777 /* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */
3778 #define TSDM_REG_RSP_PXP_CTRL_RDATA_EMPTY 0x42548
3779 /* [R 1] parser fifo empty in sdm_sync block */
3780 #define TSDM_REG_SYNC_PARSER_EMPTY 0x42550
3781 /* [R 1] parser serial fifo empty in sdm_sync block */
3782 #define TSDM_REG_SYNC_SYNC_EMPTY 0x42558
3783 /* [RW 32] Tick for timer counter. Applicable only when
3784 ~tsdm_registers_timer_tick_enable.timer_tick_enable =1 */
3785 #define TSDM_REG_TIMER_TICK 0x42000
3786 /* [RW 32] Interrupt mask register #0 read/write */
3787 #define TSDM_REG_TSDM_INT_MASK_0 0x4229c
3788 #define TSDM_REG_TSDM_INT_MASK_1 0x422ac
3789 /* [R 32] Interrupt register #0 read */
3790 #define TSDM_REG_TSDM_INT_STS_0 0x42290
3791 #define TSDM_REG_TSDM_INT_STS_1 0x422a0
3792 /* [RW 11] Parity mask register #0 read/write */
3793 #define TSDM_REG_TSDM_PRTY_MASK 0x422bc
3794 /* [R 11] Parity register #0 read */
3795 #define TSDM_REG_TSDM_PRTY_STS 0x422b0
3796 /* [RW 5] The number of time_slots in the arbitration cycle */
3797 #define TSEM_REG_ARB_CYCLE_SIZE 0x180034
3798 /* [RW 3] The source that is associated with arbitration element 0. Source
3799 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
3800 sleeping thread with priority 1; 4- sleeping thread with priority 2 */
3801 #define TSEM_REG_ARB_ELEMENT0 0x180020
3802 /* [RW 3] The source that is associated with arbitration element 1. Source
3803 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
3804 sleeping thread with priority 1; 4- sleeping thread with priority 2.
3805 Could not be equal to register ~tsem_registers_arb_element0.arb_element0 */
3806 #define TSEM_REG_ARB_ELEMENT1 0x180024
3807 /* [RW 3] The source that is associated with arbitration element 2. Source
3808 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
3809 sleeping thread with priority 1; 4- sleeping thread with priority 2.
3810 Could not be equal to register ~tsem_registers_arb_element0.arb_element0
3811 and ~tsem_registers_arb_element1.arb_element1 */
3812 #define TSEM_REG_ARB_ELEMENT2 0x180028
3813 /* [RW 3] The source that is associated with arbitration element 3. Source
3814 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
3815 sleeping thread with priority 1; 4- sleeping thread with priority 2.Could
3816 not be equal to register ~tsem_registers_arb_element0.arb_element0 and
3817 ~tsem_registers_arb_element1.arb_element1 and
3818 ~tsem_registers_arb_element2.arb_element2 */
3819 #define TSEM_REG_ARB_ELEMENT3 0x18002c
3820 /* [RW 3] The source that is associated with arbitration element 4. Source
3821 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
3822 sleeping thread with priority 1; 4- sleeping thread with priority 2.
3823 Could not be equal to register ~tsem_registers_arb_element0.arb_element0
3824 and ~tsem_registers_arb_element1.arb_element1 and
3825 ~tsem_registers_arb_element2.arb_element2 and
3826 ~tsem_registers_arb_element3.arb_element3 */
3827 #define TSEM_REG_ARB_ELEMENT4 0x180030
3828 #define TSEM_REG_ENABLE_IN 0x1800a4
3829 #define TSEM_REG_ENABLE_OUT 0x1800a8
3830 /* [RW 32] This address space contains all registers and memories that are
3831 placed in SEM_FAST block. The SEM_FAST registers are described in
3832 appendix B. In order to access the sem_fast registers the base address
3833 ~fast_memory.fast_memory should be added to eachsem_fast register offset. */
3834 #define TSEM_REG_FAST_MEMORY 0x1a0000
3835 /* [RW 1] Disables input messages from FIC0 May be updated during run_time
3837 #define TSEM_REG_FIC0_DISABLE 0x180224
3838 /* [RW 1] Disables input messages from FIC1 May be updated during run_time
3840 #define TSEM_REG_FIC1_DISABLE 0x180234
3841 /* [RW 15] Interrupt table Read and write access to it is not possible in
3842 the middle of the work */
3843 #define TSEM_REG_INT_TABLE 0x180400
3844 /* [ST 24] Statistics register. The number of messages that entered through
3846 #define TSEM_REG_MSG_NUM_FIC0 0x180000
3847 /* [ST 24] Statistics register. The number of messages that entered through
3849 #define TSEM_REG_MSG_NUM_FIC1 0x180004
3850 /* [ST 24] Statistics register. The number of messages that were sent to
3852 #define TSEM_REG_MSG_NUM_FOC0 0x180008
3853 /* [ST 24] Statistics register. The number of messages that were sent to
3855 #define TSEM_REG_MSG_NUM_FOC1 0x18000c
3856 /* [ST 24] Statistics register. The number of messages that were sent to
3858 #define TSEM_REG_MSG_NUM_FOC2 0x180010
3859 /* [ST 24] Statistics register. The number of messages that were sent to
3861 #define TSEM_REG_MSG_NUM_FOC3 0x180014
3862 /* [RW 1] Disables input messages from the passive buffer May be updated
3863 during run_time by the microcode */
3864 #define TSEM_REG_PAS_DISABLE 0x18024c
3865 /* [WB 128] Debug only. Passive buffer memory */
3866 #define TSEM_REG_PASSIVE_BUFFER 0x181000
3867 /* [WB 46] pram memory. B45 is parity; b[44:0] - data. */
3868 #define TSEM_REG_PRAM 0x1c0000
3869 /* [R 8] Valid sleeping threads indication have bit per thread */
3870 #define TSEM_REG_SLEEP_THREADS_VALID 0x18026c
3871 /* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */
3872 #define TSEM_REG_SLOW_EXT_STORE_EMPTY 0x1802a0
3873 /* [RW 8] List of free threads . There is a bit per thread. */
3874 #define TSEM_REG_THREADS_LIST 0x1802e4
3875 /* [RW 3] The arbitration scheme of time_slot 0 */
3876 #define TSEM_REG_TS_0_AS 0x180038
3877 /* [RW 3] The arbitration scheme of time_slot 10 */
3878 #define TSEM_REG_TS_10_AS 0x180060
3879 /* [RW 3] The arbitration scheme of time_slot 11 */
3880 #define TSEM_REG_TS_11_AS 0x180064
3881 /* [RW 3] The arbitration scheme of time_slot 12 */
3882 #define TSEM_REG_TS_12_AS 0x180068
3883 /* [RW 3] The arbitration scheme of time_slot 13 */
3884 #define TSEM_REG_TS_13_AS 0x18006c
3885 /* [RW 3] The arbitration scheme of time_slot 14 */
3886 #define TSEM_REG_TS_14_AS 0x180070
3887 /* [RW 3] The arbitration scheme of time_slot 15 */
3888 #define TSEM_REG_TS_15_AS 0x180074
3889 /* [RW 3] The arbitration scheme of time_slot 16 */
3890 #define TSEM_REG_TS_16_AS 0x180078
3891 /* [RW 3] The arbitration scheme of time_slot 17 */
3892 #define TSEM_REG_TS_17_AS 0x18007c
3893 /* [RW 3] The arbitration scheme of time_slot 18 */
3894 #define TSEM_REG_TS_18_AS 0x180080
3895 /* [RW 3] The arbitration scheme of time_slot 1 */
3896 #define TSEM_REG_TS_1_AS 0x18003c
3897 /* [RW 3] The arbitration scheme of time_slot 2 */
3898 #define TSEM_REG_TS_2_AS 0x180040
3899 /* [RW 3] The arbitration scheme of time_slot 3 */
3900 #define TSEM_REG_TS_3_AS 0x180044
3901 /* [RW 3] The arbitration scheme of time_slot 4 */
3902 #define TSEM_REG_TS_4_AS 0x180048
3903 /* [RW 3] The arbitration scheme of time_slot 5 */
3904 #define TSEM_REG_TS_5_AS 0x18004c
3905 /* [RW 3] The arbitration scheme of time_slot 6 */
3906 #define TSEM_REG_TS_6_AS 0x180050
3907 /* [RW 3] The arbitration scheme of time_slot 7 */
3908 #define TSEM_REG_TS_7_AS 0x180054
3909 /* [RW 3] The arbitration scheme of time_slot 8 */
3910 #define TSEM_REG_TS_8_AS 0x180058
3911 /* [RW 3] The arbitration scheme of time_slot 9 */
3912 #define TSEM_REG_TS_9_AS 0x18005c
3913 /* [RW 32] Interrupt mask register #0 read/write */
3914 #define TSEM_REG_TSEM_INT_MASK_0 0x180100
3915 #define TSEM_REG_TSEM_INT_MASK_1 0x180110
3916 /* [R 32] Interrupt register #0 read */
3917 #define TSEM_REG_TSEM_INT_STS_0 0x1800f4
3918 #define TSEM_REG_TSEM_INT_STS_1 0x180104
3919 /* [RW 32] Parity mask register #0 read/write */
3920 #define TSEM_REG_TSEM_PRTY_MASK_0 0x180120
3921 #define TSEM_REG_TSEM_PRTY_MASK_1 0x180130
3922 /* [R 32] Parity register #0 read */
3923 #define TSEM_REG_TSEM_PRTY_STS_0 0x180114
3924 #define TSEM_REG_TSEM_PRTY_STS_1 0x180124
3925 /* [R 5] Used to read the XX protection CAM occupancy counter. */
3926 #define UCM_REG_CAM_OCCUP 0xe0170
3927 /* [RW 1] CDU AG read Interface enable. If 0 - the request input is
3928 disregarded; valid output is deasserted; all other signals are treated as
3929 usual; if 1 - normal activity. */
3930 #define UCM_REG_CDU_AG_RD_IFEN 0xe0038
3931 /* [RW 1] CDU AG write Interface enable. If 0 - the request and valid input
3932 are disregarded; all other signals are treated as usual; if 1 - normal
3934 #define UCM_REG_CDU_AG_WR_IFEN 0xe0034
3935 /* [RW 1] CDU STORM read Interface enable. If 0 - the request input is
3936 disregarded; valid output is deasserted; all other signals are treated as
3937 usual; if 1 - normal activity. */
3938 #define UCM_REG_CDU_SM_RD_IFEN 0xe0040
3939 /* [RW 1] CDU STORM write Interface enable. If 0 - the request and valid
3940 input is disregarded; all other signals are treated as usual; if 1 -
3942 #define UCM_REG_CDU_SM_WR_IFEN 0xe003c
3943 /* [RW 4] CFC output initial credit. Max credit available - 15.Write writes
3944 the initial credit value; read returns the current value of the credit
3945 counter. Must be initialized to 1 at start-up. */
3946 #define UCM_REG_CFC_INIT_CRD 0xe0204
3947 /* [RW 3] The weight of the CP input in the WRR mechanism. 0 stands for
3948 weight 8 (the most prioritised); 1 stands for weight 1(least
3949 prioritised); 2 stands for weight 2; tc. */
3950 #define UCM_REG_CP_WEIGHT 0xe00c4
3951 /* [RW 1] Input csem Interface enable. If 0 - the valid input is
3952 disregarded; acknowledge output is deasserted; all other signals are
3953 treated as usual; if 1 - normal activity. */
3954 #define UCM_REG_CSEM_IFEN 0xe0028
3955 /* [RC 1] Set when the message length mismatch (relative to last indication)
3956 at the csem interface is detected. */
3957 #define UCM_REG_CSEM_LENGTH_MIS 0xe0160
3958 /* [RW 3] The weight of the input csem in the WRR mechanism. 0 stands for
3959 weight 8 (the most prioritised); 1 stands for weight 1(least
3960 prioritised); 2 stands for weight 2; tc. */
3961 #define UCM_REG_CSEM_WEIGHT 0xe00b8
3962 /* [RW 1] Input dorq Interface enable. If 0 - the valid input is
3963 disregarded; acknowledge output is deasserted; all other signals are
3964 treated as usual; if 1 - normal activity. */
3965 #define UCM_REG_DORQ_IFEN 0xe0030
3966 /* [RC 1] Set when the message length mismatch (relative to last indication)
3967 at the dorq interface is detected. */
3968 #define UCM_REG_DORQ_LENGTH_MIS 0xe0168
3969 /* [RW 8] The Event ID in case ErrorFlg input message bit is set. */
3970 #define UCM_REG_ERR_EVNT_ID 0xe00a4
3971 /* [RW 28] The CM erroneous header for QM and Timers formatting. */
3972 #define UCM_REG_ERR_UCM_HDR 0xe00a0
3973 /* [RW 8] The Event ID for Timers expiration. */
3974 #define UCM_REG_EXPR_EVNT_ID 0xe00a8
3975 /* [RW 8] FIC0 output initial credit. Max credit available - 255.Write
3976 writes the initial credit value; read returns the current value of the
3977 credit counter. Must be initialized to 64 at start-up. */
3978 #define UCM_REG_FIC0_INIT_CRD 0xe020c
3979 /* [RW 8] FIC1 output initial credit. Max credit available - 255.Write
3980 writes the initial credit value; read returns the current value of the
3981 credit counter. Must be initialized to 64 at start-up. */
3982 #define UCM_REG_FIC1_INIT_CRD 0xe0210
3983 /* [RW 1] Arbitration between Input Arbiter groups: 0 - fair Round-Robin; 1
3984 - strict priority defined by ~ucm_registers_gr_ag_pr.gr_ag_pr;
3985 ~ucm_registers_gr_ld0_pr.gr_ld0_pr and
3986 ~ucm_registers_gr_ld1_pr.gr_ld1_pr. */
3987 #define UCM_REG_GR_ARB_TYPE 0xe0144
3988 /* [RW 2] Load (FIC0) channel group priority. The lowest priority is 0; the
3989 highest priority is 3. It is supposed that the Store channel group is
3990 compliment to the others. */
3991 #define UCM_REG_GR_LD0_PR 0xe014c
3992 /* [RW 2] Load (FIC1) channel group priority. The lowest priority is 0; the
3993 highest priority is 3. It is supposed that the Store channel group is
3994 compliment to the others. */
3995 #define UCM_REG_GR_LD1_PR 0xe0150
3996 /* [RW 2] The queue index for invalidate counter flag decision. */
3997 #define UCM_REG_INV_CFLG_Q 0xe00e4
3998 /* [RW 5] The number of double REG-pairs; loaded from the STORM context and
3999 sent to STORM; for a specific connection type. the double REG-pairs are
4000 used in order to align to STORM context row size of 128 bits. The offset
4001 of these data in the STORM context is always 0. Index _i stands for the
4002 connection type (one of 16). */
4003 #define UCM_REG_N_SM_CTX_LD_0 0xe0054
4004 #define UCM_REG_N_SM_CTX_LD_1 0xe0058
4005 #define UCM_REG_N_SM_CTX_LD_10 0xe007c
4006 #define UCM_REG_N_SM_CTX_LD_11 0xe0080
4007 #define UCM_REG_N_SM_CTX_LD_12 0xe0084
4008 #define UCM_REG_N_SM_CTX_LD_13 0xe0088
4009 #define UCM_REG_N_SM_CTX_LD_14 0xe008c
4010 #define UCM_REG_N_SM_CTX_LD_15 0xe0090
4011 #define UCM_REG_N_SM_CTX_LD_2 0xe005c
4012 #define UCM_REG_N_SM_CTX_LD_3 0xe0060
4013 #define UCM_REG_N_SM_CTX_LD_4 0xe0064
4014 #define UCM_REG_N_SM_CTX_LD_5 0xe0068
4015 #define UCM_REG_PHYS_QNUM0_0 0xe0110
4016 #define UCM_REG_PHYS_QNUM0_1 0xe0114
4017 #define UCM_REG_PHYS_QNUM1_0 0xe0118
4018 #define UCM_REG_PHYS_QNUM1_1 0xe011c
4019 #define UCM_REG_PHYS_QNUM2_0 0xe0120
4020 #define UCM_REG_PHYS_QNUM2_1 0xe0124
4021 #define UCM_REG_PHYS_QNUM3_0 0xe0128
4022 #define UCM_REG_PHYS_QNUM3_1 0xe012c
4023 /* [RW 8] The Event ID for Timers formatting in case of stop done. */
4024 #define UCM_REG_STOP_EVNT_ID 0xe00ac
4025 /* [RC 1] Set when the message length mismatch (relative to last indication)
4026 at the STORM interface is detected. */
4027 #define UCM_REG_STORM_LENGTH_MIS 0xe0154
4028 /* [RW 1] STORM - CM Interface enable. If 0 - the valid input is
4029 disregarded; acknowledge output is deasserted; all other signals are
4030 treated as usual; if 1 - normal activity. */
4031 #define UCM_REG_STORM_UCM_IFEN 0xe0010
4032 /* [RW 4] Timers output initial credit. Max credit available - 15.Write
4033 writes the initial credit value; read returns the current value of the
4034 credit counter. Must be initialized to 4 at start-up. */
4035 #define UCM_REG_TM_INIT_CRD 0xe021c
4036 /* [RW 28] The CM header for Timers expiration command. */
4037 #define UCM_REG_TM_UCM_HDR 0xe009c
4038 /* [RW 1] Timers - CM Interface enable. If 0 - the valid input is
4039 disregarded; acknowledge output is deasserted; all other signals are
4040 treated as usual; if 1 - normal activity. */
4041 #define UCM_REG_TM_UCM_IFEN 0xe001c
4042 /* [RW 1] Input tsem Interface enable. If 0 - the valid input is
4043 disregarded; acknowledge output is deasserted; all other signals are
4044 treated as usual; if 1 - normal activity. */
4045 #define UCM_REG_TSEM_IFEN 0xe0024
4046 /* [RC 1] Set when the message length mismatch (relative to last indication)
4047 at the tsem interface is detected. */
4048 #define UCM_REG_TSEM_LENGTH_MIS 0xe015c
4049 /* [RW 3] The weight of the input tsem in the WRR mechanism. 0 stands for
4050 weight 8 (the most prioritised); 1 stands for weight 1(least
4051 prioritised); 2 stands for weight 2; tc. */
4052 #define UCM_REG_TSEM_WEIGHT 0xe00b4
4053 /* [RW 1] CM - CFC Interface enable. If 0 - the valid input is disregarded;
4054 acknowledge output is deasserted; all other signals are treated as usual;
4055 if 1 - normal activity. */
4056 #define UCM_REG_UCM_CFC_IFEN 0xe0044
4057 /* [RW 11] Interrupt mask register #0 read/write */
4058 #define UCM_REG_UCM_INT_MASK 0xe01d4
4059 /* [R 11] Interrupt register #0 read */
4060 #define UCM_REG_UCM_INT_STS 0xe01c8
4061 /* [R 27] Parity register #0 read */
4062 #define UCM_REG_UCM_PRTY_STS 0xe01d8
4063 /* [RW 2] The size of AG context region 0 in REG-pairs. Designates the MS
4064 REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5).
4065 Is used to determine the number of the AG context REG-pairs written back;
4066 when the Reg1WbFlg isn't set. */
4067 #define UCM_REG_UCM_REG0_SZ 0xe00dc
4068 /* [RW 1] CM - STORM 0 Interface enable. If 0 - the acknowledge input is
4069 disregarded; valid is deasserted; all other signals are treated as usual;
4070 if 1 - normal activity. */
4071 #define UCM_REG_UCM_STORM0_IFEN 0xe0004
4072 /* [RW 1] CM - STORM 1 Interface enable. If 0 - the acknowledge input is
4073 disregarded; valid is deasserted; all other signals are treated as usual;
4074 if 1 - normal activity. */
4075 #define UCM_REG_UCM_STORM1_IFEN 0xe0008
4076 /* [RW 1] CM - Timers Interface enable. If 0 - the valid input is
4077 disregarded; acknowledge output is deasserted; all other signals are
4078 treated as usual; if 1 - normal activity. */
4079 #define UCM_REG_UCM_TM_IFEN 0xe0020
4080 /* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input is
4081 disregarded; valid is deasserted; all other signals are treated as usual;
4082 if 1 - normal activity. */
4083 #define UCM_REG_UCM_UQM_IFEN 0xe000c
4084 /* [RW 1] If set the Q index; received from the QM is inserted to event ID. */
4085 #define UCM_REG_UCM_UQM_USE_Q 0xe00d8
4086 /* [RW 6] QM output initial credit. Max credit available - 32.Write writes
4087 the initial credit value; read returns the current value of the credit
4088 counter. Must be initialized to 32 at start-up. */
4089 #define UCM_REG_UQM_INIT_CRD 0xe0220
4090 /* [RW 3] The weight of the QM (primary) input in the WRR mechanism. 0
4091 stands for weight 8 (the most prioritised); 1 stands for weight 1(least
4092 prioritised); 2 stands for weight 2; tc. */
4093 #define UCM_REG_UQM_P_WEIGHT 0xe00cc
4094 /* [RW 28] The CM header value for QM request (primary). */
4095 #define UCM_REG_UQM_UCM_HDR_P 0xe0094
4096 /* [RW 28] The CM header value for QM request (secondary). */
4097 #define UCM_REG_UQM_UCM_HDR_S 0xe0098
4098 /* [RW 1] QM - CM Interface enable. If 0 - the valid input is disregarded;
4099 acknowledge output is deasserted; all other signals are treated as usual;
4100 if 1 - normal activity. */
4101 #define UCM_REG_UQM_UCM_IFEN 0xe0014
4102 /* [RW 1] Input SDM Interface enable. If 0 - the valid input is disregarded;
4103 acknowledge output is deasserted; all other signals are treated as usual;
4104 if 1 - normal activity. */
4105 #define UCM_REG_USDM_IFEN 0xe0018
4106 /* [RC 1] Set when the message length mismatch (relative to last indication)
4107 at the SDM interface is detected. */
4108 #define UCM_REG_USDM_LENGTH_MIS 0xe0158
4109 /* [RW 1] Input xsem Interface enable. If 0 - the valid input is
4110 disregarded; acknowledge output is deasserted; all other signals are
4111 treated as usual; if 1 - normal activity. */
4112 #define UCM_REG_XSEM_IFEN 0xe002c
4113 /* [RC 1] Set when the message length mismatch (relative to last indication)
4114 at the xsem interface isdetected. */
4115 #define UCM_REG_XSEM_LENGTH_MIS 0xe0164
4116 /* [RW 20] Indirect access to the descriptor table of the XX protection
4117 mechanism. The fields are:[5:0] - message length; 14:6] - message
4118 pointer; 19:15] - next pointer. */
4119 #define UCM_REG_XX_DESCR_TABLE 0xe0280
4120 #define UCM_REG_XX_DESCR_TABLE_SIZE 32
4121 /* [R 6] Use to read the XX protection Free counter. */
4122 #define UCM_REG_XX_FREE 0xe016c
4123 /* [RW 6] Initial value for the credit counter; responsible for fulfilling
4124 of the Input Stage XX protection buffer by the XX protection pending
4125 messages. Write writes the initial credit value; read returns the current
4126 value of the credit counter. Must be initialized to 12 at start-up. */
4127 #define UCM_REG_XX_INIT_CRD 0xe0224
4128 /* [RW 6] The maximum number of pending messages; which may be stored in XX
4129 protection. ~ucm_registers_xx_free.xx_free read on read. */
4130 #define UCM_REG_XX_MSG_NUM 0xe0228
4131 /* [RW 8] The Event ID; sent to the STORM in case of XX overflow. */
4132 #define UCM_REG_XX_OVFL_EVNT_ID 0xe004c
4133 /* [RW 16] Indirect access to the XX table of the XX protection mechanism.
4134 The fields are: [4:0] - tail pointer; 10:5] - Link List size; 15:11] -
4136 #define UCM_REG_XX_TABLE 0xe0300
4137 /* [RW 8] The event id for aggregated interrupt 0 */
4138 #define USDM_REG_AGG_INT_EVENT_0 0xc4038
4139 #define USDM_REG_AGG_INT_EVENT_1 0xc403c
4140 #define USDM_REG_AGG_INT_EVENT_10 0xc4060
4141 #define USDM_REG_AGG_INT_EVENT_11 0xc4064
4142 #define USDM_REG_AGG_INT_EVENT_12 0xc4068
4143 #define USDM_REG_AGG_INT_EVENT_13 0xc406c
4144 #define USDM_REG_AGG_INT_EVENT_14 0xc4070
4145 #define USDM_REG_AGG_INT_EVENT_15 0xc4074
4146 #define USDM_REG_AGG_INT_EVENT_16 0xc4078
4147 #define USDM_REG_AGG_INT_EVENT_17 0xc407c
4148 #define USDM_REG_AGG_INT_EVENT_18 0xc4080
4149 #define USDM_REG_AGG_INT_EVENT_19 0xc4084
4150 #define USDM_REG_AGG_INT_EVENT_2 0xc4040
4151 #define USDM_REG_AGG_INT_EVENT_20 0xc4088
4152 #define USDM_REG_AGG_INT_EVENT_21 0xc408c
4153 #define USDM_REG_AGG_INT_EVENT_22 0xc4090
4154 #define USDM_REG_AGG_INT_EVENT_23 0xc4094
4155 #define USDM_REG_AGG_INT_EVENT_24 0xc4098
4156 #define USDM_REG_AGG_INT_EVENT_25 0xc409c
4157 #define USDM_REG_AGG_INT_EVENT_26 0xc40a0
4158 #define USDM_REG_AGG_INT_EVENT_27 0xc40a4
4159 #define USDM_REG_AGG_INT_EVENT_28 0xc40a8
4160 #define USDM_REG_AGG_INT_EVENT_29 0xc40ac
4161 #define USDM_REG_AGG_INT_EVENT_3 0xc4044
4162 #define USDM_REG_AGG_INT_EVENT_30 0xc40b0
4163 #define USDM_REG_AGG_INT_EVENT_31 0xc40b4
4164 #define USDM_REG_AGG_INT_EVENT_4 0xc4048
4165 /* [RW 1] For each aggregated interrupt index whether the mode is normal (0)
4166 or auto-mask-mode (1) */
4167 #define USDM_REG_AGG_INT_MODE_0 0xc41b8
4168 #define USDM_REG_AGG_INT_MODE_1 0xc41bc
4169 #define USDM_REG_AGG_INT_MODE_10 0xc41e0
4170 #define USDM_REG_AGG_INT_MODE_11 0xc41e4
4171 #define USDM_REG_AGG_INT_MODE_12 0xc41e8
4172 #define USDM_REG_AGG_INT_MODE_13 0xc41ec
4173 #define USDM_REG_AGG_INT_MODE_14 0xc41f0
4174 #define USDM_REG_AGG_INT_MODE_15 0xc41f4
4175 #define USDM_REG_AGG_INT_MODE_16 0xc41f8
4176 #define USDM_REG_AGG_INT_MODE_17 0xc41fc
4177 #define USDM_REG_AGG_INT_MODE_18 0xc4200
4178 #define USDM_REG_AGG_INT_MODE_19 0xc4204
4179 /* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */
4180 #define USDM_REG_CFC_RSP_START_ADDR 0xc4008
4181 /* [RW 16] The maximum value of the competion counter #0 */
4182 #define USDM_REG_CMP_COUNTER_MAX0 0xc401c
4183 /* [RW 16] The maximum value of the competion counter #1 */
4184 #define USDM_REG_CMP_COUNTER_MAX1 0xc4020
4185 /* [RW 16] The maximum value of the competion counter #2 */
4186 #define USDM_REG_CMP_COUNTER_MAX2 0xc4024
4187 /* [RW 16] The maximum value of the competion counter #3 */
4188 #define USDM_REG_CMP_COUNTER_MAX3 0xc4028
4189 /* [RW 13] The start address in the internal RAM for the completion
4191 #define USDM_REG_CMP_COUNTER_START_ADDR 0xc400c
4192 #define USDM_REG_ENABLE_IN1 0xc4238
4193 #define USDM_REG_ENABLE_IN2 0xc423c
4194 #define USDM_REG_ENABLE_OUT1 0xc4240
4195 #define USDM_REG_ENABLE_OUT2 0xc4244
4196 /* [RW 4] The initial number of messages that can be sent to the pxp control
4197 interface without receiving any ACK. */
4198 #define USDM_REG_INIT_CREDIT_PXP_CTRL 0xc44c0
4199 /* [ST 32] The number of ACK after placement messages received */
4200 #define USDM_REG_NUM_OF_ACK_AFTER_PLACE 0xc4280
4201 /* [ST 32] The number of packet end messages received from the parser */
4202 #define USDM_REG_NUM_OF_PKT_END_MSG 0xc4278
4203 /* [ST 32] The number of requests received from the pxp async if */
4204 #define USDM_REG_NUM_OF_PXP_ASYNC_REQ 0xc427c
4205 /* [ST 32] The number of commands received in queue 0 */
4206 #define USDM_REG_NUM_OF_Q0_CMD 0xc4248
4207 /* [ST 32] The number of commands received in queue 10 */
4208 #define USDM_REG_NUM_OF_Q10_CMD 0xc4270
4209 /* [ST 32] The number of commands received in queue 11 */
4210 #define USDM_REG_NUM_OF_Q11_CMD 0xc4274
4211 /* [ST 32] The number of commands received in queue 1 */
4212 #define USDM_REG_NUM_OF_Q1_CMD 0xc424c
4213 /* [ST 32] The number of commands received in queue 2 */
4214 #define USDM_REG_NUM_OF_Q2_CMD 0xc4250
4215 /* [ST 32] The number of commands received in queue 3 */
4216 #define USDM_REG_NUM_OF_Q3_CMD 0xc4254
4217 /* [ST 32] The number of commands received in queue 4 */
4218 #define USDM_REG_NUM_OF_Q4_CMD 0xc4258
4219 /* [ST 32] The number of commands received in queue 5 */
4220 #define USDM_REG_NUM_OF_Q5_CMD 0xc425c
4221 /* [ST 32] The number of commands received in queue 6 */
4222 #define USDM_REG_NUM_OF_Q6_CMD 0xc4260
4223 /* [ST 32] The number of commands received in queue 7 */
4224 #define USDM_REG_NUM_OF_Q7_CMD 0xc4264
4225 /* [ST 32] The number of commands received in queue 8 */
4226 #define USDM_REG_NUM_OF_Q8_CMD 0xc4268
4227 /* [ST 32] The number of commands received in queue 9 */
4228 #define USDM_REG_NUM_OF_Q9_CMD 0xc426c
4229 /* [RW 13] The start address in the internal RAM for the packet end message */
4230 #define USDM_REG_PCK_END_MSG_START_ADDR 0xc4014
4231 /* [RW 13] The start address in the internal RAM for queue counters */
4232 #define USDM_REG_Q_COUNTER_START_ADDR 0xc4010
4233 /* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */
4234 #define USDM_REG_RSP_PXP_CTRL_RDATA_EMPTY 0xc4550
4235 /* [R 1] parser fifo empty in sdm_sync block */
4236 #define USDM_REG_SYNC_PARSER_EMPTY 0xc4558
4237 /* [R 1] parser serial fifo empty in sdm_sync block */
4238 #define USDM_REG_SYNC_SYNC_EMPTY 0xc4560
4239 /* [RW 32] Tick for timer counter. Applicable only when
4240 ~usdm_registers_timer_tick_enable.timer_tick_enable =1 */
4241 #define USDM_REG_TIMER_TICK 0xc4000
4242 /* [RW 32] Interrupt mask register #0 read/write */
4243 #define USDM_REG_USDM_INT_MASK_0 0xc42a0
4244 #define USDM_REG_USDM_INT_MASK_1 0xc42b0
4245 /* [R 32] Interrupt register #0 read */
4246 #define USDM_REG_USDM_INT_STS_0 0xc4294
4247 #define USDM_REG_USDM_INT_STS_1 0xc42a4
4248 /* [RW 11] Parity mask register #0 read/write */
4249 #define USDM_REG_USDM_PRTY_MASK 0xc42c0
4250 /* [R 11] Parity register #0 read */
4251 #define USDM_REG_USDM_PRTY_STS 0xc42b4
4252 /* [RW 5] The number of time_slots in the arbitration cycle */
4253 #define USEM_REG_ARB_CYCLE_SIZE 0x300034
4254 /* [RW 3] The source that is associated with arbitration element 0. Source
4255 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
4256 sleeping thread with priority 1; 4- sleeping thread with priority 2 */
4257 #define USEM_REG_ARB_ELEMENT0 0x300020
4258 /* [RW 3] The source that is associated with arbitration element 1. Source
4259 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
4260 sleeping thread with priority 1; 4- sleeping thread with priority 2.
4261 Could not be equal to register ~usem_registers_arb_element0.arb_element0 */
4262 #define USEM_REG_ARB_ELEMENT1 0x300024
4263 /* [RW 3] The source that is associated with arbitration element 2. Source
4264 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
4265 sleeping thread with priority 1; 4- sleeping thread with priority 2.
4266 Could not be equal to register ~usem_registers_arb_element0.arb_element0
4267 and ~usem_registers_arb_element1.arb_element1 */
4268 #define USEM_REG_ARB_ELEMENT2 0x300028
4269 /* [RW 3] The source that is associated with arbitration element 3. Source
4270 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
4271 sleeping thread with priority 1; 4- sleeping thread with priority 2.Could
4272 not be equal to register ~usem_registers_arb_element0.arb_element0 and
4273 ~usem_registers_arb_element1.arb_element1 and
4274 ~usem_registers_arb_element2.arb_element2 */
4275 #define USEM_REG_ARB_ELEMENT3 0x30002c
4276 /* [RW 3] The source that is associated with arbitration element 4. Source
4277 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
4278 sleeping thread with priority 1; 4- sleeping thread with priority 2.
4279 Could not be equal to register ~usem_registers_arb_element0.arb_element0
4280 and ~usem_registers_arb_element1.arb_element1 and
4281 ~usem_registers_arb_element2.arb_element2 and
4282 ~usem_registers_arb_element3.arb_element3 */
4283 #define USEM_REG_ARB_ELEMENT4 0x300030
4284 #define USEM_REG_ENABLE_IN 0x3000a4
4285 #define USEM_REG_ENABLE_OUT 0x3000a8
4286 /* [RW 32] This address space contains all registers and memories that are
4287 placed in SEM_FAST block. The SEM_FAST registers are described in
4288 appendix B. In order to access the sem_fast registers the base address
4289 ~fast_memory.fast_memory should be added to eachsem_fast register offset. */
4290 #define USEM_REG_FAST_MEMORY 0x320000
4291 /* [RW 1] Disables input messages from FIC0 May be updated during run_time
4293 #define USEM_REG_FIC0_DISABLE 0x300224
4294 /* [RW 1] Disables input messages from FIC1 May be updated during run_time
4296 #define USEM_REG_FIC1_DISABLE 0x300234
4297 /* [RW 15] Interrupt table Read and write access to it is not possible in
4298 the middle of the work */
4299 #define USEM_REG_INT_TABLE 0x300400
4300 /* [ST 24] Statistics register. The number of messages that entered through
4302 #define USEM_REG_MSG_NUM_FIC0 0x300000
4303 /* [ST 24] Statistics register. The number of messages that entered through
4305 #define USEM_REG_MSG_NUM_FIC1 0x300004
4306 /* [ST 24] Statistics register. The number of messages that were sent to
4308 #define USEM_REG_MSG_NUM_FOC0 0x300008
4309 /* [ST 24] Statistics register. The number of messages that were sent to
4311 #define USEM_REG_MSG_NUM_FOC1 0x30000c
4312 /* [ST 24] Statistics register. The number of messages that were sent to
4314 #define USEM_REG_MSG_NUM_FOC2 0x300010
4315 /* [ST 24] Statistics register. The number of messages that were sent to
4317 #define USEM_REG_MSG_NUM_FOC3 0x300014
4318 /* [RW 1] Disables input messages from the passive buffer May be updated
4319 during run_time by the microcode */
4320 #define USEM_REG_PAS_DISABLE 0x30024c
4321 /* [WB 128] Debug only. Passive buffer memory */
4322 #define USEM_REG_PASSIVE_BUFFER 0x302000
4323 /* [WB 46] pram memory. B45 is parity; b[44:0] - data. */
4324 #define USEM_REG_PRAM 0x340000
4325 /* [R 16] Valid sleeping threads indication have bit per thread */
4326 #define USEM_REG_SLEEP_THREADS_VALID 0x30026c
4327 /* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */
4328 #define USEM_REG_SLOW_EXT_STORE_EMPTY 0x3002a0
4329 /* [RW 16] List of free threads . There is a bit per thread. */
4330 #define USEM_REG_THREADS_LIST 0x3002e4
4331 /* [RW 3] The arbitration scheme of time_slot 0 */
4332 #define USEM_REG_TS_0_AS 0x300038
4333 /* [RW 3] The arbitration scheme of time_slot 10 */
4334 #define USEM_REG_TS_10_AS 0x300060
4335 /* [RW 3] The arbitration scheme of time_slot 11 */
4336 #define USEM_REG_TS_11_AS 0x300064
4337 /* [RW 3] The arbitration scheme of time_slot 12 */
4338 #define USEM_REG_TS_12_AS 0x300068
4339 /* [RW 3] The arbitration scheme of time_slot 13 */
4340 #define USEM_REG_TS_13_AS 0x30006c
4341 /* [RW 3] The arbitration scheme of time_slot 14 */
4342 #define USEM_REG_TS_14_AS 0x300070
4343 /* [RW 3] The arbitration scheme of time_slot 15 */
4344 #define USEM_REG_TS_15_AS 0x300074
4345 /* [RW 3] The arbitration scheme of time_slot 16 */
4346 #define USEM_REG_TS_16_AS 0x300078
4347 /* [RW 3] The arbitration scheme of time_slot 17 */
4348 #define USEM_REG_TS_17_AS 0x30007c
4349 /* [RW 3] The arbitration scheme of time_slot 18 */
4350 #define USEM_REG_TS_18_AS 0x300080
4351 /* [RW 3] The arbitration scheme of time_slot 1 */
4352 #define USEM_REG_TS_1_AS 0x30003c
4353 /* [RW 3] The arbitration scheme of time_slot 2 */
4354 #define USEM_REG_TS_2_AS 0x300040
4355 /* [RW 3] The arbitration scheme of time_slot 3 */
4356 #define USEM_REG_TS_3_AS 0x300044
4357 /* [RW 3] The arbitration scheme of time_slot 4 */
4358 #define USEM_REG_TS_4_AS 0x300048
4359 /* [RW 3] The arbitration scheme of time_slot 5 */
4360 #define USEM_REG_TS_5_AS 0x30004c
4361 /* [RW 3] The arbitration scheme of time_slot 6 */
4362 #define USEM_REG_TS_6_AS 0x300050
4363 /* [RW 3] The arbitration scheme of time_slot 7 */
4364 #define USEM_REG_TS_7_AS 0x300054
4365 /* [RW 3] The arbitration scheme of time_slot 8 */
4366 #define USEM_REG_TS_8_AS 0x300058
4367 /* [RW 3] The arbitration scheme of time_slot 9 */
4368 #define USEM_REG_TS_9_AS 0x30005c
4369 /* [RW 32] Interrupt mask register #0 read/write */
4370 #define USEM_REG_USEM_INT_MASK_0 0x300110
4371 #define USEM_REG_USEM_INT_MASK_1 0x300120
4372 /* [R 32] Interrupt register #0 read */
4373 #define USEM_REG_USEM_INT_STS_0 0x300104
4374 #define USEM_REG_USEM_INT_STS_1 0x300114
4375 /* [RW 32] Parity mask register #0 read/write */
4376 #define USEM_REG_USEM_PRTY_MASK_0 0x300130
4377 #define USEM_REG_USEM_PRTY_MASK_1 0x300140
4378 /* [R 32] Parity register #0 read */
4379 #define USEM_REG_USEM_PRTY_STS_0 0x300124
4380 #define USEM_REG_USEM_PRTY_STS_1 0x300134
4381 /* [RW 2] The queue index for registration on Aux1 counter flag. */
4382 #define XCM_REG_AUX1_Q 0x20134
4383 /* [RW 2] Per each decision rule the queue index to register to. */
4384 #define XCM_REG_AUX_CNT_FLG_Q_19 0x201b0
4385 /* [R 5] Used to read the XX protection CAM occupancy counter. */
4386 #define XCM_REG_CAM_OCCUP 0x20244
4387 /* [RW 1] CDU AG read Interface enable. If 0 - the request input is
4388 disregarded; valid output is deasserted; all other signals are treated as
4389 usual; if 1 - normal activity. */
4390 #define XCM_REG_CDU_AG_RD_IFEN 0x20044
4391 /* [RW 1] CDU AG write Interface enable. If 0 - the request and valid input
4392 are disregarded; all other signals are treated as usual; if 1 - normal
4394 #define XCM_REG_CDU_AG_WR_IFEN 0x20040
4395 /* [RW 1] CDU STORM read Interface enable. If 0 - the request input is
4396 disregarded; valid output is deasserted; all other signals are treated as
4397 usual; if 1 - normal activity. */
4398 #define XCM_REG_CDU_SM_RD_IFEN 0x2004c
4399 /* [RW 1] CDU STORM write Interface enable. If 0 - the request and valid
4400 input is disregarded; all other signals are treated as usual; if 1 -
4402 #define XCM_REG_CDU_SM_WR_IFEN 0x20048
4403 /* [RW 4] CFC output initial credit. Max credit available - 15.Write writes
4404 the initial credit value; read returns the current value of the credit
4405 counter. Must be initialized to 1 at start-up. */
4406 #define XCM_REG_CFC_INIT_CRD 0x20404
4407 /* [RW 3] The weight of the CP input in the WRR mechanism. 0 stands for
4408 weight 8 (the most prioritised); 1 stands for weight 1(least
4409 prioritised); 2 stands for weight 2; tc. */
4410 #define XCM_REG_CP_WEIGHT 0x200dc
4411 /* [RW 1] Input csem Interface enable. If 0 - the valid input is
4412 disregarded; acknowledge output is deasserted; all other signals are
4413 treated as usual; if 1 - normal activity. */
4414 #define XCM_REG_CSEM_IFEN 0x20028
4415 /* [RC 1] Set at message length mismatch (relative to last indication) at
4416 the csem interface. */
4417 #define XCM_REG_CSEM_LENGTH_MIS 0x20228
4418 /* [RW 3] The weight of the input csem in the WRR mechanism. 0 stands for
4419 weight 8 (the most prioritised); 1 stands for weight 1(least
4420 prioritised); 2 stands for weight 2; tc. */
4421 #define XCM_REG_CSEM_WEIGHT 0x200c4
4422 /* [RW 1] Input dorq Interface enable. If 0 - the valid input is
4423 disregarded; acknowledge output is deasserted; all other signals are
4424 treated as usual; if 1 - normal activity. */
4425 #define XCM_REG_DORQ_IFEN 0x20030
4426 /* [RC 1] Set at message length mismatch (relative to last indication) at
4427 the dorq interface. */
4428 #define XCM_REG_DORQ_LENGTH_MIS 0x20230
4429 /* [RW 8] The Event ID in case the ErrorFlg input message bit is set. */
4430 #define XCM_REG_ERR_EVNT_ID 0x200b0
4431 /* [RW 28] The CM erroneous header for QM and Timers formatting. */
4432 #define XCM_REG_ERR_XCM_HDR 0x200ac
4433 /* [RW 8] The Event ID for Timers expiration. */
4434 #define XCM_REG_EXPR_EVNT_ID 0x200b4
4435 /* [RW 8] FIC0 output initial credit. Max credit available - 255.Write
4436 writes the initial credit value; read returns the current value of the
4437 credit counter. Must be initialized to 64 at start-up. */
4438 #define XCM_REG_FIC0_INIT_CRD 0x2040c
4439 /* [RW 8] FIC1 output initial credit. Max credit available - 255.Write
4440 writes the initial credit value; read returns the current value of the
4441 credit counter. Must be initialized to 64 at start-up. */
4442 #define XCM_REG_FIC1_INIT_CRD 0x20410
4443 #define XCM_REG_GLB_DEL_ACK_MAX_CNT_0 0x20118
4444 #define XCM_REG_GLB_DEL_ACK_MAX_CNT_1 0x2011c
4445 #define XCM_REG_GLB_DEL_ACK_TMR_VAL_0 0x20108
4446 #define XCM_REG_GLB_DEL_ACK_TMR_VAL_1 0x2010c
4447 /* [RW 1] Arbitratiojn between Input Arbiter groups: 0 - fair Round-Robin; 1
4448 - strict priority defined by ~xcm_registers_gr_ag_pr.gr_ag_pr;
4449 ~xcm_registers_gr_ld0_pr.gr_ld0_pr and
4450 ~xcm_registers_gr_ld1_pr.gr_ld1_pr. */
4451 #define XCM_REG_GR_ARB_TYPE 0x2020c
4452 /* [RW 2] Load (FIC0) channel group priority. The lowest priority is 0; the
4453 highest priority is 3. It is supposed that the Channel group is the
4454 compliment of the other 3 groups. */
4455 #define XCM_REG_GR_LD0_PR 0x20214
4456 /* [RW 2] Load (FIC1) channel group priority. The lowest priority is 0; the
4457 highest priority is 3. It is supposed that the Channel group is the
4458 compliment of the other 3 groups. */
4459 #define XCM_REG_GR_LD1_PR 0x20218
4460 /* [RW 1] Input nig0 Interface enable. If 0 - the valid input is
4461 disregarded; acknowledge output is deasserted; all other signals are
4462 treated as usual; if 1 - normal activity. */
4463 #define XCM_REG_NIG0_IFEN 0x20038
4464 /* [RC 1] Set at message length mismatch (relative to last indication) at
4465 the nig0 interface. */
4466 #define XCM_REG_NIG0_LENGTH_MIS 0x20238
4467 /* [RW 1] Input nig1 Interface enable. If 0 - the valid input is
4468 disregarded; acknowledge output is deasserted; all other signals are
4469 treated as usual; if 1 - normal activity. */
4470 #define XCM_REG_NIG1_IFEN 0x2003c
4471 /* [RC 1] Set at message length mismatch (relative to last indication) at
4472 the nig1 interface. */
4473 #define XCM_REG_NIG1_LENGTH_MIS 0x2023c
4474 /* [RW 3] The weight of the input nig1 in the WRR mechanism. 0 stands for
4475 weight 8 (the most prioritised); 1 stands for weight 1(least
4476 prioritised); 2 stands for weight 2; tc. */
4477 #define XCM_REG_NIG1_WEIGHT 0x200d8
4478 /* [RW 5] The number of double REG-pairs; loaded from the STORM context and
4479 sent to STORM; for a specific connection type. The double REG-pairs are
4480 used in order to align to STORM context row size of 128 bits. The offset
4481 of these data in the STORM context is always 0. Index _i stands for the
4482 connection type (one of 16). */
4483 #define XCM_REG_N_SM_CTX_LD_0 0x20060
4484 #define XCM_REG_N_SM_CTX_LD_1 0x20064
4485 #define XCM_REG_N_SM_CTX_LD_10 0x20088
4486 #define XCM_REG_N_SM_CTX_LD_11 0x2008c
4487 #define XCM_REG_N_SM_CTX_LD_12 0x20090
4488 #define XCM_REG_N_SM_CTX_LD_13 0x20094
4489 #define XCM_REG_N_SM_CTX_LD_14 0x20098
4490 #define XCM_REG_N_SM_CTX_LD_15 0x2009c
4491 #define XCM_REG_N_SM_CTX_LD_2 0x20068
4492 #define XCM_REG_N_SM_CTX_LD_3 0x2006c
4493 #define XCM_REG_N_SM_CTX_LD_4 0x20070
4494 #define XCM_REG_N_SM_CTX_LD_5 0x20074
4495 /* [RW 1] Input pbf Interface enable. If 0 - the valid input is disregarded;
4496 acknowledge output is deasserted; all other signals are treated as usual;
4497 if 1 - normal activity. */
4498 #define XCM_REG_PBF_IFEN 0x20034
4499 /* [RC 1] Set at message length mismatch (relative to last indication) at
4500 the pbf interface. */
4501 #define XCM_REG_PBF_LENGTH_MIS 0x20234
4502 /* [RW 3] The weight of the input pbf in the WRR mechanism. 0 stands for
4503 weight 8 (the most prioritised); 1 stands for weight 1(least
4504 prioritised); 2 stands for weight 2; tc. */
4505 #define XCM_REG_PBF_WEIGHT 0x200d0
4506 #define XCM_REG_PHYS_QNUM3_0 0x20100
4507 #define XCM_REG_PHYS_QNUM3_1 0x20104
4508 /* [RW 8] The Event ID for Timers formatting in case of stop done. */
4509 #define XCM_REG_STOP_EVNT_ID 0x200b8
4510 /* [RC 1] Set at message length mismatch (relative to last indication) at
4511 the STORM interface. */
4512 #define XCM_REG_STORM_LENGTH_MIS 0x2021c
4513 /* [RW 3] The weight of the STORM input in the WRR mechanism. 0 stands for
4514 weight 8 (the most prioritised); 1 stands for weight 1(least
4515 prioritised); 2 stands for weight 2; tc. */
4516 #define XCM_REG_STORM_WEIGHT 0x200bc
4517 /* [RW 1] STORM - CM Interface enable. If 0 - the valid input is
4518 disregarded; acknowledge output is deasserted; all other signals are
4519 treated as usual; if 1 - normal activity. */
4520 #define XCM_REG_STORM_XCM_IFEN 0x20010
4521 /* [RW 4] Timers output initial credit. Max credit available - 15.Write
4522 writes the initial credit value; read returns the current value of the
4523 credit counter. Must be initialized to 4 at start-up. */
4524 #define XCM_REG_TM_INIT_CRD 0x2041c
4525 /* [RW 28] The CM header for Timers expiration command. */
4526 #define XCM_REG_TM_XCM_HDR 0x200a8
4527 /* [RW 1] Timers - CM Interface enable. If 0 - the valid input is
4528 disregarded; acknowledge output is deasserted; all other signals are
4529 treated as usual; if 1 - normal activity. */
4530 #define XCM_REG_TM_XCM_IFEN 0x2001c
4531 /* [RW 1] Input tsem Interface enable. If 0 - the valid input is
4532 disregarded; acknowledge output is deasserted; all other signals are
4533 treated as usual; if 1 - normal activity. */
4534 #define XCM_REG_TSEM_IFEN 0x20024
4535 /* [RC 1] Set at message length mismatch (relative to last indication) at
4536 the tsem interface. */
4537 #define XCM_REG_TSEM_LENGTH_MIS 0x20224
4538 /* [RW 3] The weight of the input tsem in the WRR mechanism. 0 stands for
4539 weight 8 (the most prioritised); 1 stands for weight 1(least
4540 prioritised); 2 stands for weight 2; tc. */
4541 #define XCM_REG_TSEM_WEIGHT 0x200c0
4542 /* [RW 2] The queue index for registration on UNA greater NXT decision rule. */
4543 #define XCM_REG_UNA_GT_NXT_Q 0x20120
4544 /* [RW 1] Input usem Interface enable. If 0 - the valid input is
4545 disregarded; acknowledge output is deasserted; all other signals are
4546 treated as usual; if 1 - normal activity. */
4547 #define XCM_REG_USEM_IFEN 0x2002c
4548 /* [RC 1] Message length mismatch (relative to last indication) at the usem
4550 #define XCM_REG_USEM_LENGTH_MIS 0x2022c
4551 /* [RW 3] The weight of the input usem in the WRR mechanism. 0 stands for
4552 weight 8 (the most prioritised); 1 stands for weight 1(least
4553 prioritised); 2 stands for weight 2; tc. */
4554 #define XCM_REG_USEM_WEIGHT 0x200c8
4555 #define XCM_REG_WU_DA_CNT_CMD00 0x201d4
4556 #define XCM_REG_WU_DA_CNT_CMD01 0x201d8
4557 #define XCM_REG_WU_DA_CNT_CMD10 0x201dc
4558 #define XCM_REG_WU_DA_CNT_CMD11 0x201e0
4559 #define XCM_REG_WU_DA_CNT_UPD_VAL00 0x201e4
4560 #define XCM_REG_WU_DA_CNT_UPD_VAL01 0x201e8
4561 #define XCM_REG_WU_DA_CNT_UPD_VAL10 0x201ec
4562 #define XCM_REG_WU_DA_CNT_UPD_VAL11 0x201f0
4563 #define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD00 0x201c4
4564 #define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD01 0x201c8
4565 #define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD10 0x201cc
4566 #define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD11 0x201d0
4567 /* [RW 1] CM - CFC Interface enable. If 0 - the valid input is disregarded;
4568 acknowledge output is deasserted; all other signals are treated as usual;
4569 if 1 - normal activity. */
4570 #define XCM_REG_XCM_CFC_IFEN 0x20050
4571 /* [RW 14] Interrupt mask register #0 read/write */
4572 #define XCM_REG_XCM_INT_MASK 0x202b4
4573 /* [R 14] Interrupt register #0 read */
4574 #define XCM_REG_XCM_INT_STS 0x202a8
4575 /* [R 30] Parity register #0 read */
4576 #define XCM_REG_XCM_PRTY_STS 0x202b8
4577 /* [RW 4] The size of AG context region 0 in REG-pairs. Designates the MS
4578 REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5).
4579 Is used to determine the number of the AG context REG-pairs written back;
4580 when the Reg1WbFlg isn't set. */
4581 #define XCM_REG_XCM_REG0_SZ 0x200f4
4582 /* [RW 1] CM - STORM 0 Interface enable. If 0 - the acknowledge input is
4583 disregarded; valid is deasserted; all other signals are treated as usual;
4584 if 1 - normal activity. */
4585 #define XCM_REG_XCM_STORM0_IFEN 0x20004
4586 /* [RW 1] CM - STORM 1 Interface enable. If 0 - the acknowledge input is
4587 disregarded; valid is deasserted; all other signals are treated as usual;
4588 if 1 - normal activity. */
4589 #define XCM_REG_XCM_STORM1_IFEN 0x20008
4590 /* [RW 1] CM - Timers Interface enable. If 0 - the valid input is
4591 disregarded; acknowledge output is deasserted; all other signals are
4592 treated as usual; if 1 - normal activity. */
4593 #define XCM_REG_XCM_TM_IFEN 0x20020
4594 /* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input is
4595 disregarded; valid is deasserted; all other signals are treated as usual;
4596 if 1 - normal activity. */
4597 #define XCM_REG_XCM_XQM_IFEN 0x2000c
4598 /* [RW 1] If set the Q index; received from the QM is inserted to event ID. */
4599 #define XCM_REG_XCM_XQM_USE_Q 0x200f0
4600 /* [RW 4] The value by which CFC updates the activity counter at QM bypass. */
4601 #define XCM_REG_XQM_BYP_ACT_UPD 0x200fc
4602 /* [RW 6] QM output initial credit. Max credit available - 32.Write writes
4603 the initial credit value; read returns the current value of the credit
4604 counter. Must be initialized to 32 at start-up. */
4605 #define XCM_REG_XQM_INIT_CRD 0x20420
4606 /* [RW 3] The weight of the QM (primary) input in the WRR mechanism. 0
4607 stands for weight 8 (the most prioritised); 1 stands for weight 1(least
4608 prioritised); 2 stands for weight 2; tc. */
4609 #define XCM_REG_XQM_P_WEIGHT 0x200e4
4610 /* [RW 28] The CM header value for QM request (primary). */
4611 #define XCM_REG_XQM_XCM_HDR_P 0x200a0
4612 /* [RW 28] The CM header value for QM request (secondary). */
4613 #define XCM_REG_XQM_XCM_HDR_S 0x200a4
4614 /* [RW 1] QM - CM Interface enable. If 0 - the valid input is disregarded;
4615 acknowledge output is deasserted; all other signals are treated as usual;
4616 if 1 - normal activity. */
4617 #define XCM_REG_XQM_XCM_IFEN 0x20014
4618 /* [RW 1] Input SDM Interface enable. If 0 - the valid input is disregarded;
4619 acknowledge output is deasserted; all other signals are treated as usual;
4620 if 1 - normal activity. */
4621 #define XCM_REG_XSDM_IFEN 0x20018
4622 /* [RC 1] Set at message length mismatch (relative to last indication) at
4623 the SDM interface. */
4624 #define XCM_REG_XSDM_LENGTH_MIS 0x20220
4625 /* [RW 3] The weight of the SDM input in the WRR mechanism. 0 stands for
4626 weight 8 (the most prioritised); 1 stands for weight 1(least
4627 prioritised); 2 stands for weight 2; tc. */
4628 #define XCM_REG_XSDM_WEIGHT 0x200e0
4629 /* [RW 17] Indirect access to the descriptor table of the XX protection
4630 mechanism. The fields are: [5:0] - message length; 11:6] - message
4631 pointer; 16:12] - next pointer. */
4632 #define XCM_REG_XX_DESCR_TABLE 0x20480
4633 #define XCM_REG_XX_DESCR_TABLE_SIZE 32
4634 /* [R 6] Used to read the XX protection Free counter. */
4635 #define XCM_REG_XX_FREE 0x20240
4636 /* [RW 6] Initial value for the credit counter; responsible for fulfilling
4637 of the Input Stage XX protection buffer by the XX protection pending
4638 messages. Max credit available - 3.Write writes the initial credit value;
4639 read returns the current value of the credit counter. Must be initialized
4640 to 2 at start-up. */
4641 #define XCM_REG_XX_INIT_CRD 0x20424
4642 /* [RW 6] The maximum number of pending messages; which may be stored in XX
4643 protection. ~xcm_registers_xx_free.xx_free read on read. */
4644 #define XCM_REG_XX_MSG_NUM 0x20428
4645 /* [RW 8] The Event ID; sent to the STORM in case of XX overflow. */
4646 #define XCM_REG_XX_OVFL_EVNT_ID 0x20058
4647 /* [RW 16] Indirect access to the XX table of the XX protection mechanism.
4648 The fields are:[4:0] - tail pointer; 9:5] - Link List size; 14:10] -
4650 #define XCM_REG_XX_TABLE 0x20500
4651 /* [RW 8] The event id for aggregated interrupt 0 */
4652 #define XSDM_REG_AGG_INT_EVENT_0 0x166038
4653 #define XSDM_REG_AGG_INT_EVENT_1 0x16603c
4654 #define XSDM_REG_AGG_INT_EVENT_10 0x166060
4655 #define XSDM_REG_AGG_INT_EVENT_11 0x166064
4656 #define XSDM_REG_AGG_INT_EVENT_12 0x166068
4657 #define XSDM_REG_AGG_INT_EVENT_13 0x16606c
4658 #define XSDM_REG_AGG_INT_EVENT_14 0x166070
4659 #define XSDM_REG_AGG_INT_EVENT_15 0x166074
4660 #define XSDM_REG_AGG_INT_EVENT_16 0x166078
4661 #define XSDM_REG_AGG_INT_EVENT_17 0x16607c
4662 #define XSDM_REG_AGG_INT_EVENT_18 0x166080
4663 #define XSDM_REG_AGG_INT_EVENT_19 0x166084
4664 #define XSDM_REG_AGG_INT_EVENT_10 0x166060
4665 #define XSDM_REG_AGG_INT_EVENT_11 0x166064
4666 #define XSDM_REG_AGG_INT_EVENT_12 0x166068
4667 #define XSDM_REG_AGG_INT_EVENT_2 0x166040
4668 #define XSDM_REG_AGG_INT_EVENT_20 0x166088
4669 #define XSDM_REG_AGG_INT_EVENT_21 0x16608c
4670 #define XSDM_REG_AGG_INT_EVENT_22 0x166090
4671 #define XSDM_REG_AGG_INT_EVENT_23 0x166094
4672 #define XSDM_REG_AGG_INT_EVENT_24 0x166098
4673 #define XSDM_REG_AGG_INT_EVENT_25 0x16609c
4674 #define XSDM_REG_AGG_INT_EVENT_26 0x1660a0
4675 #define XSDM_REG_AGG_INT_EVENT_27 0x1660a4
4676 #define XSDM_REG_AGG_INT_EVENT_28 0x1660a8
4677 #define XSDM_REG_AGG_INT_EVENT_29 0x1660ac
4678 #define XSDM_REG_AGG_INT_EVENT_3 0x166044
4679 #define XSDM_REG_AGG_INT_EVENT_30 0x1660b0
4680 #define XSDM_REG_AGG_INT_EVENT_31 0x1660b4
4681 #define XSDM_REG_AGG_INT_EVENT_4 0x166048
4682 #define XSDM_REG_AGG_INT_EVENT_5 0x16604c
4683 #define XSDM_REG_AGG_INT_EVENT_6 0x166050
4684 #define XSDM_REG_AGG_INT_EVENT_7 0x166054
4685 #define XSDM_REG_AGG_INT_EVENT_8 0x166058
4686 #define XSDM_REG_AGG_INT_EVENT_9 0x16605c
4687 /* [RW 1] For each aggregated interrupt index whether the mode is normal (0)
4688 or auto-mask-mode (1) */
4689 #define XSDM_REG_AGG_INT_MODE_0 0x1661b8
4690 #define XSDM_REG_AGG_INT_MODE_1 0x1661bc
4691 #define XSDM_REG_AGG_INT_MODE_10 0x1661e0
4692 #define XSDM_REG_AGG_INT_MODE_11 0x1661e4
4693 #define XSDM_REG_AGG_INT_MODE_12 0x1661e8
4694 #define XSDM_REG_AGG_INT_MODE_13 0x1661ec
4695 #define XSDM_REG_AGG_INT_MODE_14 0x1661f0
4696 #define XSDM_REG_AGG_INT_MODE_15 0x1661f4
4697 #define XSDM_REG_AGG_INT_MODE_16 0x1661f8
4698 #define XSDM_REG_AGG_INT_MODE_17 0x1661fc
4699 #define XSDM_REG_AGG_INT_MODE_18 0x166200
4700 #define XSDM_REG_AGG_INT_MODE_19 0x166204
4701 /* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */
4702 #define XSDM_REG_CFC_RSP_START_ADDR 0x166008
4703 /* [RW 16] The maximum value of the competion counter #0 */
4704 #define XSDM_REG_CMP_COUNTER_MAX0 0x16601c
4705 /* [RW 16] The maximum value of the competion counter #1 */
4706 #define XSDM_REG_CMP_COUNTER_MAX1 0x166020
4707 /* [RW 16] The maximum value of the competion counter #2 */
4708 #define XSDM_REG_CMP_COUNTER_MAX2 0x166024
4709 /* [RW 16] The maximum value of the competion counter #3 */
4710 #define XSDM_REG_CMP_COUNTER_MAX3 0x166028
4711 /* [RW 13] The start address in the internal RAM for the completion
4713 #define XSDM_REG_CMP_COUNTER_START_ADDR 0x16600c
4714 #define XSDM_REG_ENABLE_IN1 0x166238
4715 #define XSDM_REG_ENABLE_IN2 0x16623c
4716 #define XSDM_REG_ENABLE_OUT1 0x166240
4717 #define XSDM_REG_ENABLE_OUT2 0x166244
4718 /* [RW 4] The initial number of messages that can be sent to the pxp control
4719 interface without receiving any ACK. */
4720 #define XSDM_REG_INIT_CREDIT_PXP_CTRL 0x1664bc
4721 /* [ST 32] The number of ACK after placement messages received */
4722 #define XSDM_REG_NUM_OF_ACK_AFTER_PLACE 0x16627c
4723 /* [ST 32] The number of packet end messages received from the parser */
4724 #define XSDM_REG_NUM_OF_PKT_END_MSG 0x166274
4725 /* [ST 32] The number of requests received from the pxp async if */
4726 #define XSDM_REG_NUM_OF_PXP_ASYNC_REQ 0x166278
4727 /* [ST 32] The number of commands received in queue 0 */
4728 #define XSDM_REG_NUM_OF_Q0_CMD 0x166248
4729 /* [ST 32] The number of commands received in queue 10 */
4730 #define XSDM_REG_NUM_OF_Q10_CMD 0x16626c
4731 /* [ST 32] The number of commands received in queue 11 */
4732 #define XSDM_REG_NUM_OF_Q11_CMD 0x166270
4733 /* [ST 32] The number of commands received in queue 1 */
4734 #define XSDM_REG_NUM_OF_Q1_CMD 0x16624c
4735 /* [ST 32] The number of commands received in queue 3 */
4736 #define XSDM_REG_NUM_OF_Q3_CMD 0x166250
4737 /* [ST 32] The number of commands received in queue 4 */
4738 #define XSDM_REG_NUM_OF_Q4_CMD 0x166254
4739 /* [ST 32] The number of commands received in queue 5 */
4740 #define XSDM_REG_NUM_OF_Q5_CMD 0x166258
4741 /* [ST 32] The number of commands received in queue 6 */
4742 #define XSDM_REG_NUM_OF_Q6_CMD 0x16625c
4743 /* [ST 32] The number of commands received in queue 7 */
4744 #define XSDM_REG_NUM_OF_Q7_CMD 0x166260
4745 /* [ST 32] The number of commands received in queue 8 */
4746 #define XSDM_REG_NUM_OF_Q8_CMD 0x166264
4747 /* [ST 32] The number of commands received in queue 9 */
4748 #define XSDM_REG_NUM_OF_Q9_CMD 0x166268
4749 /* [RW 13] The start address in the internal RAM for queue counters */
4750 #define XSDM_REG_Q_COUNTER_START_ADDR 0x166010
4751 /* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */
4752 #define XSDM_REG_RSP_PXP_CTRL_RDATA_EMPTY 0x166548
4753 /* [R 1] parser fifo empty in sdm_sync block */
4754 #define XSDM_REG_SYNC_PARSER_EMPTY 0x166550
4755 /* [R 1] parser serial fifo empty in sdm_sync block */
4756 #define XSDM_REG_SYNC_SYNC_EMPTY 0x166558
4757 /* [RW 32] Tick for timer counter. Applicable only when
4758 ~xsdm_registers_timer_tick_enable.timer_tick_enable =1 */
4759 #define XSDM_REG_TIMER_TICK 0x166000
4760 /* [RW 32] Interrupt mask register #0 read/write */
4761 #define XSDM_REG_XSDM_INT_MASK_0 0x16629c
4762 #define XSDM_REG_XSDM_INT_MASK_1 0x1662ac
4763 /* [R 32] Interrupt register #0 read */
4764 #define XSDM_REG_XSDM_INT_STS_0 0x166290
4765 #define XSDM_REG_XSDM_INT_STS_1 0x1662a0
4766 /* [RW 11] Parity mask register #0 read/write */
4767 #define XSDM_REG_XSDM_PRTY_MASK 0x1662bc
4768 /* [R 11] Parity register #0 read */
4769 #define XSDM_REG_XSDM_PRTY_STS 0x1662b0
4770 /* [RW 5] The number of time_slots in the arbitration cycle */
4771 #define XSEM_REG_ARB_CYCLE_SIZE 0x280034
4772 /* [RW 3] The source that is associated with arbitration element 0. Source
4773 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
4774 sleeping thread with priority 1; 4- sleeping thread with priority 2 */
4775 #define XSEM_REG_ARB_ELEMENT0 0x280020
4776 /* [RW 3] The source that is associated with arbitration element 1. Source
4777 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
4778 sleeping thread with priority 1; 4- sleeping thread with priority 2.
4779 Could not be equal to register ~xsem_registers_arb_element0.arb_element0 */
4780 #define XSEM_REG_ARB_ELEMENT1 0x280024
4781 /* [RW 3] The source that is associated with arbitration element 2. Source
4782 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
4783 sleeping thread with priority 1; 4- sleeping thread with priority 2.
4784 Could not be equal to register ~xsem_registers_arb_element0.arb_element0
4785 and ~xsem_registers_arb_element1.arb_element1 */
4786 #define XSEM_REG_ARB_ELEMENT2 0x280028
4787 /* [RW 3] The source that is associated with arbitration element 3. Source
4788 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
4789 sleeping thread with priority 1; 4- sleeping thread with priority 2.Could
4790 not be equal to register ~xsem_registers_arb_element0.arb_element0 and
4791 ~xsem_registers_arb_element1.arb_element1 and
4792 ~xsem_registers_arb_element2.arb_element2 */
4793 #define XSEM_REG_ARB_ELEMENT3 0x28002c
4794 /* [RW 3] The source that is associated with arbitration element 4. Source
4795 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
4796 sleeping thread with priority 1; 4- sleeping thread with priority 2.
4797 Could not be equal to register ~xsem_registers_arb_element0.arb_element0
4798 and ~xsem_registers_arb_element1.arb_element1 and
4799 ~xsem_registers_arb_element2.arb_element2 and
4800 ~xsem_registers_arb_element3.arb_element3 */
4801 #define XSEM_REG_ARB_ELEMENT4 0x280030
4802 #define XSEM_REG_ENABLE_IN 0x2800a4
4803 #define XSEM_REG_ENABLE_OUT 0x2800a8
4804 /* [RW 32] This address space contains all registers and memories that are
4805 placed in SEM_FAST block. The SEM_FAST registers are described in
4806 appendix B. In order to access the sem_fast registers the base address
4807 ~fast_memory.fast_memory should be added to eachsem_fast register offset. */
4808 #define XSEM_REG_FAST_MEMORY 0x2a0000
4809 /* [RW 1] Disables input messages from FIC0 May be updated during run_time
4811 #define XSEM_REG_FIC0_DISABLE 0x280224
4812 /* [RW 1] Disables input messages from FIC1 May be updated during run_time
4814 #define XSEM_REG_FIC1_DISABLE 0x280234
4815 /* [RW 15] Interrupt table Read and write access to it is not possible in
4816 the middle of the work */
4817 #define XSEM_REG_INT_TABLE 0x280400
4818 /* [ST 24] Statistics register. The number of messages that entered through
4820 #define XSEM_REG_MSG_NUM_FIC0 0x280000
4821 /* [ST 24] Statistics register. The number of messages that entered through
4823 #define XSEM_REG_MSG_NUM_FIC1 0x280004
4824 /* [ST 24] Statistics register. The number of messages that were sent to
4826 #define XSEM_REG_MSG_NUM_FOC0 0x280008
4827 /* [ST 24] Statistics register. The number of messages that were sent to
4829 #define XSEM_REG_MSG_NUM_FOC1 0x28000c
4830 /* [ST 24] Statistics register. The number of messages that were sent to
4832 #define XSEM_REG_MSG_NUM_FOC2 0x280010
4833 /* [ST 24] Statistics register. The number of messages that were sent to
4835 #define XSEM_REG_MSG_NUM_FOC3 0x280014
4836 /* [RW 1] Disables input messages from the passive buffer May be updated
4837 during run_time by the microcode */
4838 #define XSEM_REG_PAS_DISABLE 0x28024c
4839 /* [WB 128] Debug only. Passive buffer memory */
4840 #define XSEM_REG_PASSIVE_BUFFER 0x282000
4841 /* [WB 46] pram memory. B45 is parity; b[44:0] - data. */
4842 #define XSEM_REG_PRAM 0x2c0000
4843 /* [R 16] Valid sleeping threads indication have bit per thread */
4844 #define XSEM_REG_SLEEP_THREADS_VALID 0x28026c
4845 /* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */
4846 #define XSEM_REG_SLOW_EXT_STORE_EMPTY 0x2802a0
4847 /* [RW 16] List of free threads . There is a bit per thread. */
4848 #define XSEM_REG_THREADS_LIST 0x2802e4
4849 /* [RW 3] The arbitration scheme of time_slot 0 */
4850 #define XSEM_REG_TS_0_AS 0x280038
4851 /* [RW 3] The arbitration scheme of time_slot 10 */
4852 #define XSEM_REG_TS_10_AS 0x280060
4853 /* [RW 3] The arbitration scheme of time_slot 11 */
4854 #define XSEM_REG_TS_11_AS 0x280064
4855 /* [RW 3] The arbitration scheme of time_slot 12 */
4856 #define XSEM_REG_TS_12_AS 0x280068
4857 /* [RW 3] The arbitration scheme of time_slot 13 */
4858 #define XSEM_REG_TS_13_AS 0x28006c
4859 /* [RW 3] The arbitration scheme of time_slot 14 */
4860 #define XSEM_REG_TS_14_AS 0x280070
4861 /* [RW 3] The arbitration scheme of time_slot 15 */
4862 #define XSEM_REG_TS_15_AS 0x280074
4863 /* [RW 3] The arbitration scheme of time_slot 16 */
4864 #define XSEM_REG_TS_16_AS 0x280078
4865 /* [RW 3] The arbitration scheme of time_slot 17 */
4866 #define XSEM_REG_TS_17_AS 0x28007c
4867 /* [RW 3] The arbitration scheme of time_slot 18 */
4868 #define XSEM_REG_TS_18_AS 0x280080
4869 /* [RW 3] The arbitration scheme of time_slot 1 */
4870 #define XSEM_REG_TS_1_AS 0x28003c
4871 /* [RW 3] The arbitration scheme of time_slot 2 */
4872 #define XSEM_REG_TS_2_AS 0x280040
4873 /* [RW 3] The arbitration scheme of time_slot 3 */
4874 #define XSEM_REG_TS_3_AS 0x280044
4875 /* [RW 3] The arbitration scheme of time_slot 4 */
4876 #define XSEM_REG_TS_4_AS 0x280048
4877 /* [RW 3] The arbitration scheme of time_slot 5 */
4878 #define XSEM_REG_TS_5_AS 0x28004c
4879 /* [RW 3] The arbitration scheme of time_slot 6 */
4880 #define XSEM_REG_TS_6_AS 0x280050
4881 /* [RW 3] The arbitration scheme of time_slot 7 */
4882 #define XSEM_REG_TS_7_AS 0x280054
4883 /* [RW 3] The arbitration scheme of time_slot 8 */
4884 #define XSEM_REG_TS_8_AS 0x280058
4885 /* [RW 3] The arbitration scheme of time_slot 9 */
4886 #define XSEM_REG_TS_9_AS 0x28005c
4887 /* [RW 32] Interrupt mask register #0 read/write */
4888 #define XSEM_REG_XSEM_INT_MASK_0 0x280110
4889 #define XSEM_REG_XSEM_INT_MASK_1 0x280120
4890 /* [R 32] Interrupt register #0 read */
4891 #define XSEM_REG_XSEM_INT_STS_0 0x280104
4892 #define XSEM_REG_XSEM_INT_STS_1 0x280114
4893 /* [RW 32] Parity mask register #0 read/write */
4894 #define XSEM_REG_XSEM_PRTY_MASK_0 0x280130
4895 #define XSEM_REG_XSEM_PRTY_MASK_1 0x280140
4896 /* [R 32] Parity register #0 read */
4897 #define XSEM_REG_XSEM_PRTY_STS_0 0x280124
4898 #define XSEM_REG_XSEM_PRTY_STS_1 0x280134
4899 #define MCPR_NVM_ACCESS_ENABLE_EN (1L<<0)
4900 #define MCPR_NVM_ACCESS_ENABLE_WR_EN (1L<<1)
4901 #define MCPR_NVM_ADDR_NVM_ADDR_VALUE (0xffffffL<<0)
4902 #define MCPR_NVM_CFG4_FLASH_SIZE (0x7L<<0)
4903 #define MCPR_NVM_COMMAND_DOIT (1L<<4)
4904 #define MCPR_NVM_COMMAND_DONE (1L<<3)
4905 #define MCPR_NVM_COMMAND_FIRST (1L<<7)
4906 #define MCPR_NVM_COMMAND_LAST (1L<<8)
4907 #define MCPR_NVM_COMMAND_WR (1L<<5)
4908 #define MCPR_NVM_COMMAND_WREN (1L<<16)
4909 #define MCPR_NVM_COMMAND_WREN_BITSHIFT 16
4910 #define MCPR_NVM_COMMAND_WRDI (1L<<17)
4911 #define MCPR_NVM_COMMAND_WRDI_BITSHIFT 17
4912 #define MCPR_NVM_SW_ARB_ARB_ARB1 (1L<<9)
4913 #define MCPR_NVM_SW_ARB_ARB_REQ_CLR1 (1L<<5)
4914 #define MCPR_NVM_SW_ARB_ARB_REQ_SET1 (1L<<1)
4915 #define BIGMAC_REGISTER_BMAC_CONTROL (0x00<<3)
4916 #define BIGMAC_REGISTER_BMAC_XGXS_CONTROL (0x01<<3)
4917 #define BIGMAC_REGISTER_CNT_MAX_SIZE (0x05<<3)
4918 #define BIGMAC_REGISTER_RX_CONTROL (0x21<<3)
4919 #define BIGMAC_REGISTER_RX_LLFC_MSG_FLDS (0x46<<3)
4920 #define BIGMAC_REGISTER_RX_MAX_SIZE (0x23<<3)
4921 #define BIGMAC_REGISTER_RX_STAT_GR64 (0x26<<3)
4922 #define BIGMAC_REGISTER_RX_STAT_GRIPJ (0x42<<3)
4923 #define BIGMAC_REGISTER_TX_CONTROL (0x07<<3)
4924 #define BIGMAC_REGISTER_TX_MAX_SIZE (0x09<<3)
4925 #define BIGMAC_REGISTER_TX_PAUSE_THRESHOLD (0x0A<<3)
4926 #define BIGMAC_REGISTER_TX_SOURCE_ADDR (0x08<<3)
4927 #define BIGMAC_REGISTER_TX_STAT_GTBYT (0x20<<3)
4928 #define BIGMAC_REGISTER_TX_STAT_GTPKT (0x0C<<3)
4929 #define EMAC_LED_1000MB_OVERRIDE (1L<<1)
4930 #define EMAC_LED_100MB_OVERRIDE (1L<<2)
4931 #define EMAC_LED_10MB_OVERRIDE (1L<<3)
4932 #define EMAC_LED_2500MB_OVERRIDE (1L<<12)
4933 #define EMAC_LED_OVERRIDE (1L<<0)
4934 #define EMAC_LED_TRAFFIC (1L<<6)
4935 #define EMAC_MDIO_COMM_COMMAND_ADDRESS (0L<<26)
4936 #define EMAC_MDIO_COMM_COMMAND_READ_45 (3L<<26)
4937 #define EMAC_MDIO_COMM_COMMAND_WRITE_45 (1L<<26)
4938 #define EMAC_MDIO_COMM_DATA (0xffffL<<0)
4939 #define EMAC_MDIO_COMM_START_BUSY (1L<<29)
4940 #define EMAC_MDIO_MODE_AUTO_POLL (1L<<4)
4941 #define EMAC_MDIO_MODE_CLAUSE_45 (1L<<31)
4942 #define EMAC_MDIO_MODE_CLOCK_CNT (0x3fL<<16)
4943 #define EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT 16
4944 #define EMAC_MODE_25G_MODE (1L<<5)
4945 #define EMAC_MODE_HALF_DUPLEX (1L<<1)
4946 #define EMAC_MODE_PORT_GMII (2L<<2)
4947 #define EMAC_MODE_PORT_MII (1L<<2)
4948 #define EMAC_MODE_PORT_MII_10M (3L<<2)
4949 #define EMAC_MODE_RESET (1L<<0)
4950 #define EMAC_REG_EMAC_LED 0xc
4951 #define EMAC_REG_EMAC_MAC_MATCH 0x10
4952 #define EMAC_REG_EMAC_MDIO_COMM 0xac
4953 #define EMAC_REG_EMAC_MDIO_MODE 0xb4
4954 #define EMAC_REG_EMAC_MODE 0x0
4955 #define EMAC_REG_EMAC_RX_MODE 0xc8
4956 #define EMAC_REG_EMAC_RX_MTU_SIZE 0x9c
4957 #define EMAC_REG_EMAC_RX_STAT_AC 0x180
4958 #define EMAC_REG_EMAC_RX_STAT_AC_28 0x1f4
4959 #define EMAC_REG_EMAC_RX_STAT_AC_COUNT 23
4960 #define EMAC_REG_EMAC_TX_MODE 0xbc
4961 #define EMAC_REG_EMAC_TX_STAT_AC 0x280
4962 #define EMAC_REG_EMAC_TX_STAT_AC_COUNT 22
4963 #define EMAC_RX_MODE_FLOW_EN (1L<<2)
4964 #define EMAC_RX_MODE_KEEP_VLAN_TAG (1L<<10)
4965 #define EMAC_RX_MODE_PROMISCUOUS (1L<<8)
4966 #define EMAC_RX_MTU_SIZE_JUMBO_ENA (1L<<31)
4967 #define EMAC_TX_MODE_EXT_PAUSE_EN (1L<<3)
4968 #define MISC_REGISTERS_GPIO_0 0
4969 #define MISC_REGISTERS_GPIO_1 1
4970 #define MISC_REGISTERS_GPIO_2 2
4971 #define MISC_REGISTERS_GPIO_3 3
4972 #define MISC_REGISTERS_GPIO_CLR_POS 16
4973 #define MISC_REGISTERS_GPIO_FLOAT (0xffL<<24)
4974 #define MISC_REGISTERS_GPIO_FLOAT_POS 24
4975 #define MISC_REGISTERS_GPIO_HIGH 1
4976 #define MISC_REGISTERS_GPIO_INPUT_HI_Z 2
4977 #define MISC_REGISTERS_GPIO_LOW 0
4978 #define MISC_REGISTERS_GPIO_OUTPUT_HIGH 1
4979 #define MISC_REGISTERS_GPIO_OUTPUT_LOW 0
4980 #define MISC_REGISTERS_GPIO_PORT_SHIFT 4
4981 #define MISC_REGISTERS_GPIO_SET_POS 8
4982 #define MISC_REGISTERS_RESET_REG_1_CLEAR 0x588
4983 #define MISC_REGISTERS_RESET_REG_1_RST_NIG (0x1<<7)
4984 #define MISC_REGISTERS_RESET_REG_1_SET 0x584
4985 #define MISC_REGISTERS_RESET_REG_2_CLEAR 0x598
4986 #define MISC_REGISTERS_RESET_REG_2_RST_BMAC0 (0x1<<0)
4987 #define MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE (0x1<<14)
4988 #define MISC_REGISTERS_RESET_REG_2_SET 0x594
4989 #define MISC_REGISTERS_RESET_REG_3_CLEAR 0x5a8
4990 #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_IDDQ (0x1<<1)
4991 #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_PWRDWN (0x1<<2)
4992 #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_PWRDWN_SD (0x1<<3)
4993 #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_RSTB_HW (0x1<<0)
4994 #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_IDDQ (0x1<<5)
4995 #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_PWRDWN (0x1<<6)
4996 #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_PWRDWN_SD (0x1<<7)
4997 #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_RSTB_HW (0x1<<4)
4998 #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_TXD_FIFO_RSTB (0x1<<8)
4999 #define MISC_REGISTERS_RESET_REG_3_SET 0x5a4
5000 #define MISC_REGISTERS_SPIO_4 4
5001 #define MISC_REGISTERS_SPIO_5 5
5002 #define MISC_REGISTERS_SPIO_7 7
5003 #define MISC_REGISTERS_SPIO_CLR_POS 16
5004 #define MISC_REGISTERS_SPIO_FLOAT (0xffL<<24)
5005 #define GRC_MISC_REGISTERS_SPIO_FLOAT7 0x80000000
5006 #define GRC_MISC_REGISTERS_SPIO_FLOAT6 0x40000000
5007 #define GRC_MISC_REGISTERS_SPIO_FLOAT5 0x20000000
5008 #define GRC_MISC_REGISTERS_SPIO_FLOAT4 0x10000000
5009 #define MISC_REGISTERS_SPIO_FLOAT_POS 24
5010 #define MISC_REGISTERS_SPIO_INPUT_HI_Z 2
5011 #define MISC_REGISTERS_SPIO_INT_OLD_SET_POS 16
5012 #define MISC_REGISTERS_SPIO_OUTPUT_HIGH 1
5013 #define MISC_REGISTERS_SPIO_OUTPUT_LOW 0
5014 #define MISC_REGISTERS_SPIO_SET_POS 8
5015 #define HW_LOCK_MAX_RESOURCE_VALUE 31
5016 #define HW_LOCK_RESOURCE_8072_MDIO 0
5017 #define HW_LOCK_RESOURCE_GPIO 1
5018 #define HW_LOCK_RESOURCE_PORT0_ATT_MASK 3
5019 #define HW_LOCK_RESOURCE_SPIO 2
5020 #define HW_LOCK_RESOURCE_UNDI 5
5021 #define AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR (1<<18)
5022 #define AEU_INPUTS_ATTN_BITS_CCM_HW_INTERRUPT (1<<31)
5023 #define AEU_INPUTS_ATTN_BITS_CDU_HW_INTERRUPT (1<<9)
5024 #define AEU_INPUTS_ATTN_BITS_CDU_PARITY_ERROR (1<<8)
5025 #define AEU_INPUTS_ATTN_BITS_CFC_HW_INTERRUPT (1<<7)
5026 #define AEU_INPUTS_ATTN_BITS_CFC_PARITY_ERROR (1<<6)
5027 #define AEU_INPUTS_ATTN_BITS_CSDM_HW_INTERRUPT (1<<29)
5028 #define AEU_INPUTS_ATTN_BITS_CSDM_PARITY_ERROR (1<<28)
5029 #define AEU_INPUTS_ATTN_BITS_CSEMI_HW_INTERRUPT (1<<1)
5030 #define AEU_INPUTS_ATTN_BITS_CSEMI_PARITY_ERROR (1<<0)
5031 #define AEU_INPUTS_ATTN_BITS_DEBUG_PARITY_ERROR (1<<18)
5032 #define AEU_INPUTS_ATTN_BITS_DMAE_HW_INTERRUPT (1<<11)
5033 #define AEU_INPUTS_ATTN_BITS_DOORBELLQ_HW_INTERRUPT (1<<13)
5034 #define AEU_INPUTS_ATTN_BITS_DOORBELLQ_PARITY_ERROR (1<<12)
5035 #define AEU_INPUTS_ATTN_BITS_IGU_PARITY_ERROR (1<<12)
5036 #define AEU_INPUTS_ATTN_BITS_MISC_HW_INTERRUPT (1<<15)
5037 #define AEU_INPUTS_ATTN_BITS_MISC_PARITY_ERROR (1<<14)
5038 #define AEU_INPUTS_ATTN_BITS_PARSER_PARITY_ERROR (1<<20)
5039 #define AEU_INPUTS_ATTN_BITS_PBCLIENT_PARITY_ERROR (1<<0)
5040 #define AEU_INPUTS_ATTN_BITS_PBF_HW_INTERRUPT (1<<31)
5041 #define AEU_INPUTS_ATTN_BITS_PXP_HW_INTERRUPT (1<<3)
5042 #define AEU_INPUTS_ATTN_BITS_PXP_PARITY_ERROR (1<<2)
5043 #define AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_HW_INTERRUPT (1<<5)
5044 #define AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR (1<<4)
5045 #define AEU_INPUTS_ATTN_BITS_QM_HW_INTERRUPT (1<<3)
5046 #define AEU_INPUTS_ATTN_BITS_QM_PARITY_ERROR (1<<2)
5047 #define AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR (1<<22)
5048 #define AEU_INPUTS_ATTN_BITS_SPIO5 (1<<15)
5049 #define AEU_INPUTS_ATTN_BITS_TCM_HW_INTERRUPT (1<<27)
5050 #define AEU_INPUTS_ATTN_BITS_TIMERS_HW_INTERRUPT (1<<5)
5051 #define AEU_INPUTS_ATTN_BITS_TSDM_HW_INTERRUPT (1<<25)
5052 #define AEU_INPUTS_ATTN_BITS_TSDM_PARITY_ERROR (1<<24)
5053 #define AEU_INPUTS_ATTN_BITS_TSEMI_HW_INTERRUPT (1<<29)
5054 #define AEU_INPUTS_ATTN_BITS_TSEMI_PARITY_ERROR (1<<28)
5055 #define AEU_INPUTS_ATTN_BITS_UCM_HW_INTERRUPT (1<<23)
5056 #define AEU_INPUTS_ATTN_BITS_UPB_HW_INTERRUPT (1<<27)
5057 #define AEU_INPUTS_ATTN_BITS_UPB_PARITY_ERROR (1<<26)
5058 #define AEU_INPUTS_ATTN_BITS_USDM_HW_INTERRUPT (1<<21)
5059 #define AEU_INPUTS_ATTN_BITS_USDM_PARITY_ERROR (1<<20)
5060 #define AEU_INPUTS_ATTN_BITS_USEMI_HW_INTERRUPT (1<<25)
5061 #define AEU_INPUTS_ATTN_BITS_USEMI_PARITY_ERROR (1<<24)
5062 #define AEU_INPUTS_ATTN_BITS_VAUX_PCI_CORE_PARITY_ERROR (1<<16)
5063 #define AEU_INPUTS_ATTN_BITS_XCM_HW_INTERRUPT (1<<9)
5064 #define AEU_INPUTS_ATTN_BITS_XSDM_HW_INTERRUPT (1<<7)
5065 #define AEU_INPUTS_ATTN_BITS_XSDM_PARITY_ERROR (1<<6)
5066 #define AEU_INPUTS_ATTN_BITS_XSEMI_HW_INTERRUPT (1<<11)
5067 #define AEU_INPUTS_ATTN_BITS_XSEMI_PARITY_ERROR (1<<10)
5068 #define RESERVED_GENERAL_ATTENTION_BIT_0 0
5070 #define EVEREST_GEN_ATTN_IN_USE_MASK 0x3ffe0
5071 #define EVEREST_LATCHED_ATTN_IN_USE_MASK 0xffe00000
5073 #define RESERVED_GENERAL_ATTENTION_BIT_6 6
5074 #define RESERVED_GENERAL_ATTENTION_BIT_7 7
5075 #define RESERVED_GENERAL_ATTENTION_BIT_8 8
5076 #define RESERVED_GENERAL_ATTENTION_BIT_9 9
5077 #define RESERVED_GENERAL_ATTENTION_BIT_10 10
5078 #define RESERVED_GENERAL_ATTENTION_BIT_11 11
5079 #define RESERVED_GENERAL_ATTENTION_BIT_12 12
5080 #define RESERVED_GENERAL_ATTENTION_BIT_13 13
5081 #define RESERVED_GENERAL_ATTENTION_BIT_14 14
5082 #define RESERVED_GENERAL_ATTENTION_BIT_15 15
5083 #define RESERVED_GENERAL_ATTENTION_BIT_16 16
5084 #define RESERVED_GENERAL_ATTENTION_BIT_17 17
5085 #define RESERVED_GENERAL_ATTENTION_BIT_18 18
5086 #define RESERVED_GENERAL_ATTENTION_BIT_19 19
5087 #define RESERVED_GENERAL_ATTENTION_BIT_20 20
5088 #define RESERVED_GENERAL_ATTENTION_BIT_21 21
5090 /* storm asserts attention bits */
5091 #define TSTORM_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_7
5092 #define USTORM_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_8
5093 #define CSTORM_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_9
5094 #define XSTORM_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_10
5096 /* mcp error attention bit */
5097 #define MCP_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_11
5099 /*E1H NIG status sync attention mapped to group 4-7*/
5100 #define LINK_SYNC_ATTENTION_BIT_FUNC_0 RESERVED_GENERAL_ATTENTION_BIT_12
5101 #define LINK_SYNC_ATTENTION_BIT_FUNC_1 RESERVED_GENERAL_ATTENTION_BIT_13
5102 #define LINK_SYNC_ATTENTION_BIT_FUNC_2 RESERVED_GENERAL_ATTENTION_BIT_14
5103 #define LINK_SYNC_ATTENTION_BIT_FUNC_3 RESERVED_GENERAL_ATTENTION_BIT_15
5104 #define LINK_SYNC_ATTENTION_BIT_FUNC_4 RESERVED_GENERAL_ATTENTION_BIT_16
5105 #define LINK_SYNC_ATTENTION_BIT_FUNC_5 RESERVED_GENERAL_ATTENTION_BIT_17
5106 #define LINK_SYNC_ATTENTION_BIT_FUNC_6 RESERVED_GENERAL_ATTENTION_BIT_18
5107 #define LINK_SYNC_ATTENTION_BIT_FUNC_7 RESERVED_GENERAL_ATTENTION_BIT_19
5110 #define LATCHED_ATTN_RBCR 23
5111 #define LATCHED_ATTN_RBCT 24
5112 #define LATCHED_ATTN_RBCN 25
5113 #define LATCHED_ATTN_RBCU 26
5114 #define LATCHED_ATTN_RBCP 27
5115 #define LATCHED_ATTN_TIMEOUT_GRC 28
5116 #define LATCHED_ATTN_RSVD_GRC 29
5117 #define LATCHED_ATTN_ROM_PARITY_MCP 30
5118 #define LATCHED_ATTN_UM_RX_PARITY_MCP 31
5119 #define LATCHED_ATTN_UM_TX_PARITY_MCP 32
5120 #define LATCHED_ATTN_SCPAD_PARITY_MCP 33
5122 #define GENERAL_ATTEN_WORD(atten_name) ((94 + atten_name) / 32)
5123 #define GENERAL_ATTEN_OFFSET(atten_name) (1 << ((94 + atten_name) % 32))
5125 * This file defines GRC base address for every block.
5126 * This file is included by chipsim, asm microcode and cpp microcode.
5127 * These values are used in Design.xml on regBase attribute
5128 * Use the base with the generated offsets of specific registers.
5131 #define GRCBASE_PXPCS 0x000000
5132 #define GRCBASE_PCICONFIG 0x002000
5133 #define GRCBASE_PCIREG 0x002400
5134 #define GRCBASE_EMAC0 0x008000
5135 #define GRCBASE_EMAC1 0x008400
5136 #define GRCBASE_DBU 0x008800
5137 #define GRCBASE_MISC 0x00A000
5138 #define GRCBASE_DBG 0x00C000
5139 #define GRCBASE_NIG 0x010000
5140 #define GRCBASE_XCM 0x020000
5141 #define GRCBASE_PRS 0x040000
5142 #define GRCBASE_SRCH 0x040400
5143 #define GRCBASE_TSDM 0x042000
5144 #define GRCBASE_TCM 0x050000
5145 #define GRCBASE_BRB1 0x060000
5146 #define GRCBASE_MCP 0x080000
5147 #define GRCBASE_UPB 0x0C1000
5148 #define GRCBASE_CSDM 0x0C2000
5149 #define GRCBASE_USDM 0x0C4000
5150 #define GRCBASE_CCM 0x0D0000
5151 #define GRCBASE_UCM 0x0E0000
5152 #define GRCBASE_CDU 0x101000
5153 #define GRCBASE_DMAE 0x102000
5154 #define GRCBASE_PXP 0x103000
5155 #define GRCBASE_CFC 0x104000
5156 #define GRCBASE_HC 0x108000
5157 #define GRCBASE_PXP2 0x120000
5158 #define GRCBASE_PBF 0x140000
5159 #define GRCBASE_XPB 0x161000
5160 #define GRCBASE_TIMERS 0x164000
5161 #define GRCBASE_XSDM 0x166000
5162 #define GRCBASE_QM 0x168000
5163 #define GRCBASE_DQ 0x170000
5164 #define GRCBASE_TSEM 0x180000
5165 #define GRCBASE_CSEM 0x200000
5166 #define GRCBASE_XSEM 0x280000
5167 #define GRCBASE_USEM 0x300000
5168 #define GRCBASE_MISC_AEU GRCBASE_MISC
5171 /*the offset of the configuration space in the pci core register*/
5172 #define PCICFG_OFFSET 0x2000
5173 #define PCICFG_VENDOR_ID_OFFSET 0x00
5174 #define PCICFG_DEVICE_ID_OFFSET 0x02
5175 #define PCICFG_COMMAND_OFFSET 0x04
5176 #define PCICFG_STATUS_OFFSET 0x06
5177 #define PCICFG_REVESION_ID 0x08
5178 #define PCICFG_CACHE_LINE_SIZE 0x0c
5179 #define PCICFG_LATENCY_TIMER 0x0d
5180 #define PCICFG_BAR_1_LOW 0x10
5181 #define PCICFG_BAR_1_HIGH 0x14
5182 #define PCICFG_BAR_2_LOW 0x18
5183 #define PCICFG_BAR_2_HIGH 0x1c
5184 #define PCICFG_SUBSYSTEM_VENDOR_ID_OFFSET 0x2c
5185 #define PCICFG_SUBSYSTEM_ID_OFFSET 0x2e
5186 #define PCICFG_INT_LINE 0x3c
5187 #define PCICFG_INT_PIN 0x3d
5188 #define PCICFG_PM_CSR_OFFSET 0x4c
5189 #define PCICFG_GRC_ADDRESS 0x78
5190 #define PCICFG_GRC_DATA 0x80
5191 #define PCICFG_DEVICE_CONTROL 0xb4
5192 #define PCICFG_LINK_CONTROL 0xbc
5194 #define PCICFG_COMMAND_IO_SPACE (1<<0)
5195 #define PCICFG_COMMAND_MEM_SPACE (1<<1)
5196 #define PCICFG_COMMAND_BUS_MASTER (1<<2)
5197 #define PCICFG_COMMAND_SPECIAL_CYCLES (1<<3)
5198 #define PCICFG_COMMAND_MWI_CYCLES (1<<4)
5199 #define PCICFG_COMMAND_VGA_SNOOP (1<<5)
5200 #define PCICFG_COMMAND_PERR_ENA (1<<6)
5201 #define PCICFG_COMMAND_STEPPING (1<<7)
5202 #define PCICFG_COMMAND_SERR_ENA (1<<8)
5203 #define PCICFG_COMMAND_FAST_B2B (1<<9)
5204 #define PCICFG_COMMAND_INT_DISABLE (1<<10)
5205 #define PCICFG_COMMAND_RESERVED (0x1f<<11)
5207 #define PCICFG_PM_CSR_STATE (0x3<<0)
5208 #define PCICFG_PM_CSR_PME_STATUS (1<<15)
5210 #define BAR_USTRORM_INTMEM 0x400000
5211 #define BAR_CSTRORM_INTMEM 0x410000
5212 #define BAR_XSTRORM_INTMEM 0x420000
5213 #define BAR_TSTRORM_INTMEM 0x430000
5215 #define BAR_IGU_INTMEM 0x440000
5217 #define BAR_DOORBELL_OFFSET 0x800000
5219 #define BAR_ME_REGISTER 0x450000
5222 #define GRC_CONFIG_2_SIZE_REG 0x408 /* config_2 offset */
5223 #define PCI_CONFIG_2_BAR1_SIZE (0xfL<<0)
5224 #define PCI_CONFIG_2_BAR1_SIZE_DISABLED (0L<<0)
5225 #define PCI_CONFIG_2_BAR1_SIZE_64K (1L<<0)
5226 #define PCI_CONFIG_2_BAR1_SIZE_128K (2L<<0)
5227 #define PCI_CONFIG_2_BAR1_SIZE_256K (3L<<0)
5228 #define PCI_CONFIG_2_BAR1_SIZE_512K (4L<<0)
5229 #define PCI_CONFIG_2_BAR1_SIZE_1M (5L<<0)
5230 #define PCI_CONFIG_2_BAR1_SIZE_2M (6L<<0)
5231 #define PCI_CONFIG_2_BAR1_SIZE_4M (7L<<0)
5232 #define PCI_CONFIG_2_BAR1_SIZE_8M (8L<<0)
5233 #define PCI_CONFIG_2_BAR1_SIZE_16M (9L<<0)
5234 #define PCI_CONFIG_2_BAR1_SIZE_32M (10L<<0)
5235 #define PCI_CONFIG_2_BAR1_SIZE_64M (11L<<0)
5236 #define PCI_CONFIG_2_BAR1_SIZE_128M (12L<<0)
5237 #define PCI_CONFIG_2_BAR1_SIZE_256M (13L<<0)
5238 #define PCI_CONFIG_2_BAR1_SIZE_512M (14L<<0)
5239 #define PCI_CONFIG_2_BAR1_SIZE_1G (15L<<0)
5240 #define PCI_CONFIG_2_BAR1_64ENA (1L<<4)
5241 #define PCI_CONFIG_2_EXP_ROM_RETRY (1L<<5)
5242 #define PCI_CONFIG_2_CFG_CYCLE_RETRY (1L<<6)
5243 #define PCI_CONFIG_2_FIRST_CFG_DONE (1L<<7)
5244 #define PCI_CONFIG_2_EXP_ROM_SIZE (0xffL<<8)
5245 #define PCI_CONFIG_2_EXP_ROM_SIZE_DISABLED (0L<<8)
5246 #define PCI_CONFIG_2_EXP_ROM_SIZE_2K (1L<<8)
5247 #define PCI_CONFIG_2_EXP_ROM_SIZE_4K (2L<<8)
5248 #define PCI_CONFIG_2_EXP_ROM_SIZE_8K (3L<<8)
5249 #define PCI_CONFIG_2_EXP_ROM_SIZE_16K (4L<<8)
5250 #define PCI_CONFIG_2_EXP_ROM_SIZE_32K (5L<<8)
5251 #define PCI_CONFIG_2_EXP_ROM_SIZE_64K (6L<<8)
5252 #define PCI_CONFIG_2_EXP_ROM_SIZE_128K (7L<<8)
5253 #define PCI_CONFIG_2_EXP_ROM_SIZE_256K (8L<<8)
5254 #define PCI_CONFIG_2_EXP_ROM_SIZE_512K (9L<<8)
5255 #define PCI_CONFIG_2_EXP_ROM_SIZE_1M (10L<<8)
5256 #define PCI_CONFIG_2_EXP_ROM_SIZE_2M (11L<<8)
5257 #define PCI_CONFIG_2_EXP_ROM_SIZE_4M (12L<<8)
5258 #define PCI_CONFIG_2_EXP_ROM_SIZE_8M (13L<<8)
5259 #define PCI_CONFIG_2_EXP_ROM_SIZE_16M (14L<<8)
5260 #define PCI_CONFIG_2_EXP_ROM_SIZE_32M (15L<<8)
5261 #define PCI_CONFIG_2_BAR_PREFETCH (1L<<16)
5262 #define PCI_CONFIG_2_RESERVED0 (0x7fffL<<17)
5264 /* config_3 offset */
5265 #define GRC_CONFIG_3_SIZE_REG (0x40c)
5266 #define PCI_CONFIG_3_STICKY_BYTE (0xffL<<0)
5267 #define PCI_CONFIG_3_FORCE_PME (1L<<24)
5268 #define PCI_CONFIG_3_PME_STATUS (1L<<25)
5269 #define PCI_CONFIG_3_PME_ENABLE (1L<<26)
5270 #define PCI_CONFIG_3_PM_STATE (0x3L<<27)
5271 #define PCI_CONFIG_3_VAUX_PRESET (1L<<30)
5272 #define PCI_CONFIG_3_PCI_POWER (1L<<31)
5274 /* config_2 offset */
5275 #define GRC_CONFIG_2_SIZE_REG 0x408
5277 #define GRC_BAR2_CONFIG 0x4e0
5278 #define PCI_CONFIG_2_BAR2_SIZE (0xfL<<0)
5279 #define PCI_CONFIG_2_BAR2_SIZE_DISABLED (0L<<0)
5280 #define PCI_CONFIG_2_BAR2_SIZE_64K (1L<<0)
5281 #define PCI_CONFIG_2_BAR2_SIZE_128K (2L<<0)
5282 #define PCI_CONFIG_2_BAR2_SIZE_256K (3L<<0)
5283 #define PCI_CONFIG_2_BAR2_SIZE_512K (4L<<0)
5284 #define PCI_CONFIG_2_BAR2_SIZE_1M (5L<<0)
5285 #define PCI_CONFIG_2_BAR2_SIZE_2M (6L<<0)
5286 #define PCI_CONFIG_2_BAR2_SIZE_4M (7L<<0)
5287 #define PCI_CONFIG_2_BAR2_SIZE_8M (8L<<0)
5288 #define PCI_CONFIG_2_BAR2_SIZE_16M (9L<<0)
5289 #define PCI_CONFIG_2_BAR2_SIZE_32M (10L<<0)
5290 #define PCI_CONFIG_2_BAR2_SIZE_64M (11L<<0)
5291 #define PCI_CONFIG_2_BAR2_SIZE_128M (12L<<0)
5292 #define PCI_CONFIG_2_BAR2_SIZE_256M (13L<<0)
5293 #define PCI_CONFIG_2_BAR2_SIZE_512M (14L<<0)
5294 #define PCI_CONFIG_2_BAR2_SIZE_1G (15L<<0)
5295 #define PCI_CONFIG_2_BAR2_64ENA (1L<<4)
5297 #define PCI_PM_DATA_A (0x410)
5298 #define PCI_PM_DATA_B (0x414)
5299 #define PCI_ID_VAL1 (0x434)
5300 #define PCI_ID_VAL2 (0x438)
5302 #define MDIO_REG_BANK_CL73_IEEEB0 0x0
5303 #define MDIO_CL73_IEEEB0_CL73_AN_CONTROL 0x0
5304 #define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_RESTART_AN 0x0200
5305 #define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN 0x1000
5306 #define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_MAIN_RST 0x8000
5308 #define MDIO_REG_BANK_CL73_IEEEB1 0x10
5309 #define MDIO_CL73_IEEEB1_AN_ADV2 0x01
5310 #define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M 0x0000
5311 #define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M_KX 0x0020
5312 #define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KX4 0x0040
5313 #define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KR 0x0080
5315 #define MDIO_REG_BANK_RX0 0x80b0
5316 #define MDIO_RX0_RX_EQ_BOOST 0x1c
5317 #define MDIO_RX0_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7
5318 #define MDIO_RX0_RX_EQ_BOOST_OFFSET_CTRL 0x10
5320 #define MDIO_REG_BANK_RX1 0x80c0
5321 #define MDIO_RX1_RX_EQ_BOOST 0x1c
5322 #define MDIO_RX1_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7
5323 #define MDIO_RX1_RX_EQ_BOOST_OFFSET_CTRL 0x10
5325 #define MDIO_REG_BANK_RX2 0x80d0
5326 #define MDIO_RX2_RX_EQ_BOOST 0x1c
5327 #define MDIO_RX2_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7
5328 #define MDIO_RX2_RX_EQ_BOOST_OFFSET_CTRL 0x10
5330 #define MDIO_REG_BANK_RX3 0x80e0
5331 #define MDIO_RX3_RX_EQ_BOOST 0x1c
5332 #define MDIO_RX3_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7
5333 #define MDIO_RX3_RX_EQ_BOOST_OFFSET_CTRL 0x10
5335 #define MDIO_REG_BANK_RX_ALL 0x80f0
5336 #define MDIO_RX_ALL_RX_EQ_BOOST 0x1c
5337 #define MDIO_RX_ALL_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7
5338 #define MDIO_RX_ALL_RX_EQ_BOOST_OFFSET_CTRL 0x10
5340 #define MDIO_REG_BANK_TX0 0x8060
5341 #define MDIO_TX0_TX_DRIVER 0x17
5342 #define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK 0xf000
5343 #define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT 12
5344 #define MDIO_TX0_TX_DRIVER_IDRIVER_MASK 0x0f00
5345 #define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT 8
5346 #define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK 0x00f0
5347 #define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT 4
5348 #define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK 0x000e
5349 #define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT 1
5350 #define MDIO_TX0_TX_DRIVER_ICBUF1T 1
5352 #define MDIO_REG_BANK_XGXS_BLOCK0 0x8000
5353 #define MDIO_BLOCK0_XGXS_CONTROL 0x10
5355 #define MDIO_REG_BANK_XGXS_BLOCK1 0x8010
5356 #define MDIO_BLOCK1_LANE_CTRL0 0x15
5357 #define MDIO_BLOCK1_LANE_CTRL1 0x16
5358 #define MDIO_BLOCK1_LANE_CTRL2 0x17
5359 #define MDIO_BLOCK1_LANE_PRBS 0x19
5361 #define MDIO_REG_BANK_XGXS_BLOCK2 0x8100
5362 #define MDIO_XGXS_BLOCK2_RX_LN_SWAP 0x10
5363 #define MDIO_XGXS_BLOCK2_RX_LN_SWAP_ENABLE 0x8000
5364 #define MDIO_XGXS_BLOCK2_RX_LN_SWAP_FORCE_ENABLE 0x4000
5365 #define MDIO_XGXS_BLOCK2_TX_LN_SWAP 0x11
5366 #define MDIO_XGXS_BLOCK2_TX_LN_SWAP_ENABLE 0x8000
5367 #define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G 0x14
5368 #define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_CX4_XGXS 0x0001
5369 #define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_HIGIG_XGXS 0x0010
5370 #define MDIO_XGXS_BLOCK2_TEST_MODE_LANE 0x15
5372 #define MDIO_REG_BANK_GP_STATUS 0x8120
5373 #define MDIO_GP_STATUS_TOP_AN_STATUS1 0x1B
5374 #define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_AUTONEG_COMPLETE 0x0001
5375 #define MDIO_GP_STATUS_TOP_AN_STATUS1_CL37_AUTONEG_COMPLETE 0x0002
5376 #define MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS 0x0004
5377 #define MDIO_GP_STATUS_TOP_AN_STATUS1_DUPLEX_STATUS 0x0008
5378 #define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_MR_LP_NP_AN_ABLE 0x0010
5379 #define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_LP_NP_BAM_ABLE 0x0020
5380 #define MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_TXSIDE 0x0040
5381 #define MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_RXSIDE 0x0080
5382 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_MASK 0x3f00
5383 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10M 0x0000
5384 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_100M 0x0100
5385 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G 0x0200
5386 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_2_5G 0x0300
5387 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_5G 0x0400
5388 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_6G 0x0500
5389 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_HIG 0x0600
5390 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_CX4 0x0700
5391 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12G_HIG 0x0800
5392 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12_5G 0x0900
5393 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_13G 0x0A00
5394 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_15G 0x0B00
5395 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_16G 0x0C00
5396 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G_KX 0x0D00
5397 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_KX4 0x0E00
5400 #define MDIO_REG_BANK_10G_PARALLEL_DETECT 0x8130
5401 #define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL 0x11
5402 #define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL_PARDET10G_EN 0x1
5403 #define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK 0x13
5404 #define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK_CNT (0xb71<<1)
5406 #define MDIO_REG_BANK_SERDES_DIGITAL 0x8300
5407 #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1 0x10
5408 #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_FIBER_MODE 0x0001
5409 #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_TBI_IF 0x0002
5410 #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_SIGNAL_DETECT_EN 0x0004
5411 #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_INVERT_SIGNAL_DETECT 0x0008
5412 #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET 0x0010
5413 #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_MSTR_MODE 0x0020
5414 #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2 0x11
5415 #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_PRL_DT_EN 0x0001
5416 #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_AN_FST_TMR 0x0040
5417 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1 0x14
5418 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_DUPLEX 0x0004
5419 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_MASK 0x0018
5420 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_SHIFT 3
5421 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_2_5G 0x0018
5422 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_1G 0x0010
5423 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_100M 0x0008
5424 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_10M 0x0000
5425 #define MDIO_SERDES_DIGITAL_MISC1 0x18
5426 #define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_MASK 0xE000
5427 #define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_25M 0x0000
5428 #define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_100M 0x2000
5429 #define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_125M 0x4000
5430 #define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_156_25M 0x6000
5431 #define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_187_5M 0x8000
5432 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_SEL 0x0010
5433 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_MASK 0x000f
5434 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_2_5G 0x0000
5435 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_5G 0x0001
5436 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_6G 0x0002
5437 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_HIG 0x0003
5438 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_CX4 0x0004
5439 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_12G 0x0005
5440 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_12_5G 0x0006
5441 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_13G 0x0007
5442 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_15G 0x0008
5443 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_16G 0x0009
5445 #define MDIO_REG_BANK_OVER_1G 0x8320
5446 #define MDIO_OVER_1G_DIGCTL_3_4 0x14
5447 #define MDIO_OVER_1G_DIGCTL_3_4_MP_ID_MASK 0xffe0
5448 #define MDIO_OVER_1G_DIGCTL_3_4_MP_ID_SHIFT 5
5449 #define MDIO_OVER_1G_UP1 0x19
5450 #define MDIO_OVER_1G_UP1_2_5G 0x0001
5451 #define MDIO_OVER_1G_UP1_5G 0x0002
5452 #define MDIO_OVER_1G_UP1_6G 0x0004
5453 #define MDIO_OVER_1G_UP1_10G 0x0010
5454 #define MDIO_OVER_1G_UP1_10GH 0x0008
5455 #define MDIO_OVER_1G_UP1_12G 0x0020
5456 #define MDIO_OVER_1G_UP1_12_5G 0x0040
5457 #define MDIO_OVER_1G_UP1_13G 0x0080
5458 #define MDIO_OVER_1G_UP1_15G 0x0100
5459 #define MDIO_OVER_1G_UP1_16G 0x0200
5460 #define MDIO_OVER_1G_UP2 0x1A
5461 #define MDIO_OVER_1G_UP2_IPREDRIVER_MASK 0x0007
5462 #define MDIO_OVER_1G_UP2_IDRIVER_MASK 0x0038
5463 #define MDIO_OVER_1G_UP2_PREEMPHASIS_MASK 0x03C0
5464 #define MDIO_OVER_1G_UP3 0x1B
5465 #define MDIO_OVER_1G_UP3_HIGIG2 0x0001
5466 #define MDIO_OVER_1G_LP_UP1 0x1C
5467 #define MDIO_OVER_1G_LP_UP2 0x1D
5468 #define MDIO_OVER_1G_LP_UP2_MR_ADV_OVER_1G_MASK 0x03ff
5469 #define MDIO_OVER_1G_LP_UP2_PREEMPHASIS_MASK 0x0780
5470 #define MDIO_OVER_1G_LP_UP2_PREEMPHASIS_SHIFT 7
5471 #define MDIO_OVER_1G_LP_UP3 0x1E
5473 #define MDIO_REG_BANK_BAM_NEXT_PAGE 0x8350
5474 #define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL 0x10
5475 #define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_BAM_MODE 0x0001
5476 #define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_TETON_AN 0x0002
5478 #define MDIO_REG_BANK_CL73_USERB0 0x8370
5479 #define MDIO_CL73_USERB0_CL73_BAM_CTRL1 0x12
5480 #define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_EN 0x8000
5481 #define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_STATION_MNGR_EN 0x4000
5482 #define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_NP_AFTER_BP_EN 0x2000
5483 #define MDIO_CL73_USERB0_CL73_BAM_CTRL3 0x14
5484 #define MDIO_CL73_USERB0_CL73_BAM_CTRL3_USE_CL73_HCD_MR 0x0001
5486 #define MDIO_REG_BANK_AER_BLOCK 0xFFD0
5487 #define MDIO_AER_BLOCK_AER_REG 0x1E
5489 #define MDIO_REG_BANK_COMBO_IEEE0 0xFFE0
5490 #define MDIO_COMBO_IEEE0_MII_CONTROL 0x10
5491 #define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_MASK 0x2040
5492 #define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_10 0x0000
5493 #define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_100 0x2000
5494 #define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_1000 0x0040
5495 #define MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX 0x0100
5496 #define MDIO_COMBO_IEEO_MII_CONTROL_RESTART_AN 0x0200
5497 #define MDIO_COMBO_IEEO_MII_CONTROL_AN_EN 0x1000
5498 #define MDIO_COMBO_IEEO_MII_CONTROL_LOOPBACK 0x4000
5499 #define MDIO_COMBO_IEEO_MII_CONTROL_RESET 0x8000
5500 #define MDIO_COMBO_IEEE0_MII_STATUS 0x11
5501 #define MDIO_COMBO_IEEE0_MII_STATUS_LINK_PASS 0x0004
5502 #define MDIO_COMBO_IEEE0_MII_STATUS_AUTONEG_COMPLETE 0x0020
5503 #define MDIO_COMBO_IEEE0_AUTO_NEG_ADV 0x14
5504 #define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX 0x0020
5505 #define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_HALF_DUPLEX 0x0040
5506 #define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK 0x0180
5507 #define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE 0x0000
5508 #define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC 0x0080
5509 #define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC 0x0100
5510 #define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH 0x0180
5511 #define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_NEXT_PAGE 0x8000
5512 #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1 0x15
5513 #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_NEXT_PAGE 0x8000
5514 #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_ACK 0x4000
5515 #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_MASK 0x0180
5516 #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_NONE 0x0000
5517 #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_BOTH 0x0180
5518 #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_HALF_DUP_CAP 0x0040
5519 #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_FULL_DUP_CAP 0x0020
5520 /*WhenthelinkpartnerisinSGMIImode(bit0=1),then
5521 bit15=link,bit12=duplex,bits11:10=speed,bit14=acknowledge.
5522 Theotherbitsarereservedandshouldbezero*/
5523 #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_SGMII_MODE 0x0001
5526 #define MDIO_PMA_DEVAD 0x1
5528 #define MDIO_PMA_REG_CTRL 0x0
5529 #define MDIO_PMA_REG_STATUS 0x1
5530 #define MDIO_PMA_REG_10G_CTRL2 0x7
5531 #define MDIO_PMA_REG_RX_SD 0xa
5533 #define MDIO_PMA_REG_BCM_CTRL 0x0096
5534 #define MDIO_PMA_REG_FEC_CTRL 0x00ab
5535 #define MDIO_PMA_REG_RX_ALARM_CTRL 0x9000
5536 #define MDIO_PMA_REG_LASI_CTRL 0x9002
5537 #define MDIO_PMA_REG_RX_ALARM 0x9003
5538 #define MDIO_PMA_REG_TX_ALARM 0x9004
5539 #define MDIO_PMA_REG_LASI_STATUS 0x9005
5540 #define MDIO_PMA_REG_PHY_IDENTIFIER 0xc800
5541 #define MDIO_PMA_REG_DIGITAL_CTRL 0xc808
5542 #define MDIO_PMA_REG_DIGITAL_STATUS 0xc809
5543 #define MDIO_PMA_REG_TX_POWER_DOWN 0xca02
5544 #define MDIO_PMA_REG_CMU_PLL_BYPASS 0xca09
5545 #define MDIO_PMA_REG_MISC_CTRL 0xca0a
5546 #define MDIO_PMA_REG_GEN_CTRL 0xca10
5547 #define MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP 0x0188
5548 #define MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET 0x018a
5549 #define MDIO_PMA_REG_ROM_VER1 0xca19
5550 #define MDIO_PMA_REG_ROM_VER2 0xca1a
5551 #define MDIO_PMA_REG_EDC_FFE_MAIN 0xca1b
5552 #define MDIO_PMA_REG_PLL_BANDWIDTH 0xca1d
5553 #define MDIO_PMA_REG_CDR_BANDWIDTH 0xca46
5554 #define MDIO_PMA_REG_MISC_CTRL1 0xca85
5556 #define MDIO_PMA_REG_7101_RESET 0xc000
5557 #define MDIO_PMA_REG_7107_LED_CNTL 0xc007
5558 #define MDIO_PMA_REG_7101_VER1 0xc026
5559 #define MDIO_PMA_REG_7101_VER2 0xc027
5562 #define MDIO_WIS_DEVAD 0x2
5564 #define MDIO_WIS_REG_LASI_CNTL 0x9002
5565 #define MDIO_WIS_REG_LASI_STATUS 0x9005
5567 #define MDIO_PCS_DEVAD 0x3
5568 #define MDIO_PCS_REG_STATUS 0x0020
5569 #define MDIO_PCS_REG_LASI_STATUS 0x9005
5570 #define MDIO_PCS_REG_7101_DSP_ACCESS 0xD000
5571 #define MDIO_PCS_REG_7101_SPI_MUX 0xD008
5572 #define MDIO_PCS_REG_7101_SPI_CTRL_ADDR 0xE12A
5573 #define MDIO_PCS_REG_7101_SPI_RESET_BIT (5)
5574 #define MDIO_PCS_REG_7101_SPI_FIFO_ADDR 0xE02A
5575 #define MDIO_PCS_REG_7101_SPI_FIFO_ADDR_WRITE_ENABLE_CMD (6)
5576 #define MDIO_PCS_REG_7101_SPI_FIFO_ADDR_BULK_ERASE_CMD (0xC7)
5577 #define MDIO_PCS_REG_7101_SPI_FIFO_ADDR_PAGE_PROGRAM_CMD (2)
5578 #define MDIO_PCS_REG_7101_SPI_BYTES_TO_TRANSFER_ADDR 0xE028
5581 #define MDIO_XS_DEVAD 0x4
5582 #define MDIO_XS_PLL_SEQUENCER 0x8000
5583 #define MDIO_XS_SFX7101_XGXS_TEST1 0xc00a
5585 #define MDIO_AN_DEVAD 0x7
5587 #define MDIO_AN_REG_CTRL 0x0000
5588 #define MDIO_AN_REG_STATUS 0x0001
5589 #define MDIO_AN_REG_STATUS_AN_COMPLETE 0x0020
5590 #define MDIO_AN_REG_ADV_PAUSE 0x0010
5591 #define MDIO_AN_REG_ADV_PAUSE_PAUSE 0x0400
5592 #define MDIO_AN_REG_ADV_PAUSE_ASYMMETRIC 0x0800
5593 #define MDIO_AN_REG_ADV_PAUSE_BOTH 0x0C00
5594 #define MDIO_AN_REG_ADV_PAUSE_MASK 0x0C00
5595 #define MDIO_AN_REG_ADV 0x0011
5596 #define MDIO_AN_REG_ADV2 0x0012
5597 #define MDIO_AN_REG_LP_AUTO_NEG 0x0013
5598 #define MDIO_AN_REG_MASTER_STATUS 0x0021
5600 #define MDIO_AN_REG_LINK_STATUS 0x8304
5601 #define MDIO_AN_REG_CL37_CL73 0x8370
5602 #define MDIO_AN_REG_CL37_AN 0xffe0
5603 #define MDIO_AN_REG_CL37_FD 0xffe4
5606 #define IGU_FUNC_BASE 0x0400
5608 #define IGU_ADDR_MSIX 0x0000
5609 #define IGU_ADDR_INT_ACK 0x0200
5610 #define IGU_ADDR_PROD_UPD 0x0201
5611 #define IGU_ADDR_ATTN_BITS_UPD 0x0202
5612 #define IGU_ADDR_ATTN_BITS_SET 0x0203
5613 #define IGU_ADDR_ATTN_BITS_CLR 0x0204
5614 #define IGU_ADDR_COALESCE_NOW 0x0205
5615 #define IGU_ADDR_SIMD_MASK 0x0206
5616 #define IGU_ADDR_SIMD_NOMASK 0x0207
5617 #define IGU_ADDR_MSI_CTL 0x0210
5618 #define IGU_ADDR_MSI_ADDR_LO 0x0211
5619 #define IGU_ADDR_MSI_ADDR_HI 0x0212
5620 #define IGU_ADDR_MSI_DATA 0x0213
5622 #define IGU_INT_ENABLE 0
5623 #define IGU_INT_DISABLE 1
5624 #define IGU_INT_NOP 2
5625 #define IGU_INT_NOP2 3
This page took 0.268902 seconds and 6 git commands to generate.