1 /* bnx2x_reg.h: Broadcom Everest network driver.
3 * Copyright (c) 2007-2009 Broadcom Corporation
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License as published by
7 * the Free Software Foundation.
9 * The registers description starts with the register Access type followed
10 * by size in bits. For example [RW 32]. The access types are:
14 * ST - Statistics register (clear on read)
16 * WB - Wide bus register - the size is over 32 bits and it should be
17 * read/write in consecutive 32 bits accesses
18 * WR - Write Clear (write 1 to clear the bit)
23 /* [R 19] Interrupt register #0 read */
24 #define BRB1_REG_BRB1_INT_STS 0x6011c
25 /* [RW 4] Parity mask register #0 read/write */
26 #define BRB1_REG_BRB1_PRTY_MASK 0x60138
27 /* [R 4] Parity register #0 read */
28 #define BRB1_REG_BRB1_PRTY_STS 0x6012c
29 /* [RW 10] At address BRB1_IND_FREE_LIST_PRS_CRDT initialize free head. At
30 address BRB1_IND_FREE_LIST_PRS_CRDT+1 initialize free tail. At address
31 BRB1_IND_FREE_LIST_PRS_CRDT+2 initialize parser initial credit. */
32 #define BRB1_REG_FREE_LIST_PRS_CRDT 0x60200
33 /* [RW 10] The number of free blocks above which the High_llfc signal to
34 interface #n is de-asserted. */
35 #define BRB1_REG_HIGH_LLFC_HIGH_THRESHOLD_0 0x6014c
36 /* [RW 10] The number of free blocks below which the High_llfc signal to
37 interface #n is asserted. */
38 #define BRB1_REG_HIGH_LLFC_LOW_THRESHOLD_0 0x6013c
39 /* [RW 23] LL RAM data. */
40 #define BRB1_REG_LL_RAM 0x61000
41 /* [RW 10] The number of free blocks above which the Low_llfc signal to
42 interface #n is de-asserted. */
43 #define BRB1_REG_LOW_LLFC_HIGH_THRESHOLD_0 0x6016c
44 /* [RW 10] The number of free blocks below which the Low_llfc signal to
45 interface #n is asserted. */
46 #define BRB1_REG_LOW_LLFC_LOW_THRESHOLD_0 0x6015c
47 /* [R 24] The number of full blocks. */
48 #define BRB1_REG_NUM_OF_FULL_BLOCKS 0x60090
49 /* [ST 32] The number of cycles that the write_full signal towards MAC #0
51 #define BRB1_REG_NUM_OF_FULL_CYCLES_0 0x600c8
52 #define BRB1_REG_NUM_OF_FULL_CYCLES_1 0x600cc
53 #define BRB1_REG_NUM_OF_FULL_CYCLES_4 0x600d8
54 /* [ST 32] The number of cycles that the pause signal towards MAC #0 was
56 #define BRB1_REG_NUM_OF_PAUSE_CYCLES_0 0x600b8
57 #define BRB1_REG_NUM_OF_PAUSE_CYCLES_1 0x600bc
58 /* [RW 10] Write client 0: De-assert pause threshold. */
59 #define BRB1_REG_PAUSE_HIGH_THRESHOLD_0 0x60078
60 #define BRB1_REG_PAUSE_HIGH_THRESHOLD_1 0x6007c
61 /* [RW 10] Write client 0: Assert pause threshold. */
62 #define BRB1_REG_PAUSE_LOW_THRESHOLD_0 0x60068
63 #define BRB1_REG_PAUSE_LOW_THRESHOLD_1 0x6006c
64 /* [R 24] The number of full blocks occupied by port. */
65 #define BRB1_REG_PORT_NUM_OCC_BLOCKS_0 0x60094
66 /* [RW 1] Reset the design by software. */
67 #define BRB1_REG_SOFT_RESET 0x600dc
68 /* [R 5] Used to read the value of the XX protection CAM occupancy counter. */
69 #define CCM_REG_CAM_OCCUP 0xd0188
70 /* [RW 1] CM - CFC Interface enable. If 0 - the valid input is disregarded;
71 acknowledge output is deasserted; all other signals are treated as usual;
72 if 1 - normal activity. */
73 #define CCM_REG_CCM_CFC_IFEN 0xd003c
74 /* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input is
75 disregarded; valid is deasserted; all other signals are treated as usual;
76 if 1 - normal activity. */
77 #define CCM_REG_CCM_CQM_IFEN 0xd000c
78 /* [RW 1] If set the Q index; received from the QM is inserted to event ID.
79 Otherwise 0 is inserted. */
80 #define CCM_REG_CCM_CQM_USE_Q 0xd00c0
81 /* [RW 11] Interrupt mask register #0 read/write */
82 #define CCM_REG_CCM_INT_MASK 0xd01e4
83 /* [R 11] Interrupt register #0 read */
84 #define CCM_REG_CCM_INT_STS 0xd01d8
85 /* [R 27] Parity register #0 read */
86 #define CCM_REG_CCM_PRTY_STS 0xd01e8
87 /* [RW 3] The size of AG context region 0 in REG-pairs. Designates the MS
88 REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5).
89 Is used to determine the number of the AG context REG-pairs written back;
90 when the input message Reg1WbFlg isn't set. */
91 #define CCM_REG_CCM_REG0_SZ 0xd00c4
92 /* [RW 1] CM - STORM 0 Interface enable. If 0 - the acknowledge input is
93 disregarded; valid is deasserted; all other signals are treated as usual;
94 if 1 - normal activity. */
95 #define CCM_REG_CCM_STORM0_IFEN 0xd0004
96 /* [RW 1] CM - STORM 1 Interface enable. If 0 - the acknowledge input is
97 disregarded; valid is deasserted; all other signals are treated as usual;
98 if 1 - normal activity. */
99 #define CCM_REG_CCM_STORM1_IFEN 0xd0008
100 /* [RW 1] CDU AG read Interface enable. If 0 - the request input is
101 disregarded; valid output is deasserted; all other signals are treated as
102 usual; if 1 - normal activity. */
103 #define CCM_REG_CDU_AG_RD_IFEN 0xd0030
104 /* [RW 1] CDU AG write Interface enable. If 0 - the request and valid input
105 are disregarded; all other signals are treated as usual; if 1 - normal
107 #define CCM_REG_CDU_AG_WR_IFEN 0xd002c
108 /* [RW 1] CDU STORM read Interface enable. If 0 - the request input is
109 disregarded; valid output is deasserted; all other signals are treated as
110 usual; if 1 - normal activity. */
111 #define CCM_REG_CDU_SM_RD_IFEN 0xd0038
112 /* [RW 1] CDU STORM write Interface enable. If 0 - the request and valid
113 input is disregarded; all other signals are treated as usual; if 1 -
115 #define CCM_REG_CDU_SM_WR_IFEN 0xd0034
116 /* [RW 4] CFC output initial credit. Max credit available - 15.Write writes
117 the initial credit value; read returns the current value of the credit
118 counter. Must be initialized to 1 at start-up. */
119 #define CCM_REG_CFC_INIT_CRD 0xd0204
120 /* [RW 2] Auxillary counter flag Q number 1. */
121 #define CCM_REG_CNT_AUX1_Q 0xd00c8
122 /* [RW 2] Auxillary counter flag Q number 2. */
123 #define CCM_REG_CNT_AUX2_Q 0xd00cc
124 /* [RW 28] The CM header value for QM request (primary). */
125 #define CCM_REG_CQM_CCM_HDR_P 0xd008c
126 /* [RW 28] The CM header value for QM request (secondary). */
127 #define CCM_REG_CQM_CCM_HDR_S 0xd0090
128 /* [RW 1] QM - CM Interface enable. If 0 - the valid input is disregarded;
129 acknowledge output is deasserted; all other signals are treated as usual;
130 if 1 - normal activity. */
131 #define CCM_REG_CQM_CCM_IFEN 0xd0014
132 /* [RW 6] QM output initial credit. Max credit available - 32. Write writes
133 the initial credit value; read returns the current value of the credit
134 counter. Must be initialized to 32 at start-up. */
135 #define CCM_REG_CQM_INIT_CRD 0xd020c
136 /* [RW 3] The weight of the QM (primary) input in the WRR mechanism. 0
137 stands for weight 8 (the most prioritised); 1 stands for weight 1(least
138 prioritised); 2 stands for weight 2; tc. */
139 #define CCM_REG_CQM_P_WEIGHT 0xd00b8
140 /* [RW 3] The weight of the QM (secondary) input in the WRR mechanism. 0
141 stands for weight 8 (the most prioritised); 1 stands for weight 1(least
142 prioritised); 2 stands for weight 2; tc. */
143 #define CCM_REG_CQM_S_WEIGHT 0xd00bc
144 /* [RW 1] Input SDM Interface enable. If 0 - the valid input is disregarded;
145 acknowledge output is deasserted; all other signals are treated as usual;
146 if 1 - normal activity. */
147 #define CCM_REG_CSDM_IFEN 0xd0018
148 /* [RC 1] Set when the message length mismatch (relative to last indication)
149 at the SDM interface is detected. */
150 #define CCM_REG_CSDM_LENGTH_MIS 0xd0170
151 /* [RW 3] The weight of the SDM input in the WRR mechanism. 0 stands for
152 weight 8 (the most prioritised); 1 stands for weight 1(least
153 prioritised); 2 stands for weight 2; tc. */
154 #define CCM_REG_CSDM_WEIGHT 0xd00b4
155 /* [RW 28] The CM header for QM formatting in case of an error in the QM
157 #define CCM_REG_ERR_CCM_HDR 0xd0094
158 /* [RW 8] The Event ID in case the input message ErrorFlg is set. */
159 #define CCM_REG_ERR_EVNT_ID 0xd0098
160 /* [RW 8] FIC0 output initial credit. Max credit available - 255. Write
161 writes the initial credit value; read returns the current value of the
162 credit counter. Must be initialized to 64 at start-up. */
163 #define CCM_REG_FIC0_INIT_CRD 0xd0210
164 /* [RW 8] FIC1 output initial credit. Max credit available - 255.Write
165 writes the initial credit value; read returns the current value of the
166 credit counter. Must be initialized to 64 at start-up. */
167 #define CCM_REG_FIC1_INIT_CRD 0xd0214
168 /* [RW 1] Arbitration between Input Arbiter groups: 0 - fair Round-Robin; 1
169 - strict priority defined by ~ccm_registers_gr_ag_pr.gr_ag_pr;
170 ~ccm_registers_gr_ld0_pr.gr_ld0_pr and
171 ~ccm_registers_gr_ld1_pr.gr_ld1_pr. Groups are according to channels and
172 outputs to STORM: aggregation; load FIC0; load FIC1 and store. */
173 #define CCM_REG_GR_ARB_TYPE 0xd015c
174 /* [RW 2] Load (FIC0) channel group priority. The lowest priority is 0; the
175 highest priority is 3. It is supposed; that the Store channel priority is
176 the compliment to 4 of the rest priorities - Aggregation channel; Load
177 (FIC0) channel and Load (FIC1). */
178 #define CCM_REG_GR_LD0_PR 0xd0164
179 /* [RW 2] Load (FIC1) channel group priority. The lowest priority is 0; the
180 highest priority is 3. It is supposed; that the Store channel priority is
181 the compliment to 4 of the rest priorities - Aggregation channel; Load
182 (FIC0) channel and Load (FIC1). */
183 #define CCM_REG_GR_LD1_PR 0xd0168
184 /* [RW 2] General flags index. */
185 #define CCM_REG_INV_DONE_Q 0xd0108
186 /* [RW 4] The number of double REG-pairs(128 bits); loaded from the STORM
187 context and sent to STORM; for a specific connection type. The double
188 REG-pairs are used in order to align to STORM context row size of 128
189 bits. The offset of these data in the STORM context is always 0. Index
190 _(0..15) stands for the connection type (one of 16). */
191 #define CCM_REG_N_SM_CTX_LD_0 0xd004c
192 #define CCM_REG_N_SM_CTX_LD_1 0xd0050
193 #define CCM_REG_N_SM_CTX_LD_2 0xd0054
194 #define CCM_REG_N_SM_CTX_LD_3 0xd0058
195 #define CCM_REG_N_SM_CTX_LD_4 0xd005c
196 /* [RW 1] Input pbf Interface enable. If 0 - the valid input is disregarded;
197 acknowledge output is deasserted; all other signals are treated as usual;
198 if 1 - normal activity. */
199 #define CCM_REG_PBF_IFEN 0xd0028
200 /* [RC 1] Set when the message length mismatch (relative to last indication)
201 at the pbf interface is detected. */
202 #define CCM_REG_PBF_LENGTH_MIS 0xd0180
203 /* [RW 3] The weight of the input pbf in the WRR mechanism. 0 stands for
204 weight 8 (the most prioritised); 1 stands for weight 1(least
205 prioritised); 2 stands for weight 2; tc. */
206 #define CCM_REG_PBF_WEIGHT 0xd00ac
207 #define CCM_REG_PHYS_QNUM1_0 0xd0134
208 #define CCM_REG_PHYS_QNUM1_1 0xd0138
209 #define CCM_REG_PHYS_QNUM2_0 0xd013c
210 #define CCM_REG_PHYS_QNUM2_1 0xd0140
211 #define CCM_REG_PHYS_QNUM3_0 0xd0144
212 #define CCM_REG_PHYS_QNUM3_1 0xd0148
213 #define CCM_REG_QOS_PHYS_QNUM0_0 0xd0114
214 #define CCM_REG_QOS_PHYS_QNUM0_1 0xd0118
215 #define CCM_REG_QOS_PHYS_QNUM1_0 0xd011c
216 #define CCM_REG_QOS_PHYS_QNUM1_1 0xd0120
217 #define CCM_REG_QOS_PHYS_QNUM2_0 0xd0124
218 #define CCM_REG_QOS_PHYS_QNUM2_1 0xd0128
219 #define CCM_REG_QOS_PHYS_QNUM3_0 0xd012c
220 #define CCM_REG_QOS_PHYS_QNUM3_1 0xd0130
221 /* [RW 1] STORM - CM Interface enable. If 0 - the valid input is
222 disregarded; acknowledge output is deasserted; all other signals are
223 treated as usual; if 1 - normal activity. */
224 #define CCM_REG_STORM_CCM_IFEN 0xd0010
225 /* [RC 1] Set when the message length mismatch (relative to last indication)
226 at the STORM interface is detected. */
227 #define CCM_REG_STORM_LENGTH_MIS 0xd016c
228 /* [RW 3] The weight of the STORM input in the WRR (Weighted Round robin)
229 mechanism. 0 stands for weight 8 (the most prioritised); 1 stands for
230 weight 1(least prioritised); 2 stands for weight 2 (more prioritised);
232 #define CCM_REG_STORM_WEIGHT 0xd009c
233 /* [RW 1] Input tsem Interface enable. If 0 - the valid input is
234 disregarded; acknowledge output is deasserted; all other signals are
235 treated as usual; if 1 - normal activity. */
236 #define CCM_REG_TSEM_IFEN 0xd001c
237 /* [RC 1] Set when the message length mismatch (relative to last indication)
238 at the tsem interface is detected. */
239 #define CCM_REG_TSEM_LENGTH_MIS 0xd0174
240 /* [RW 3] The weight of the input tsem in the WRR mechanism. 0 stands for
241 weight 8 (the most prioritised); 1 stands for weight 1(least
242 prioritised); 2 stands for weight 2; tc. */
243 #define CCM_REG_TSEM_WEIGHT 0xd00a0
244 /* [RW 1] Input usem Interface enable. If 0 - the valid input is
245 disregarded; acknowledge output is deasserted; all other signals are
246 treated as usual; if 1 - normal activity. */
247 #define CCM_REG_USEM_IFEN 0xd0024
248 /* [RC 1] Set when message length mismatch (relative to last indication) at
249 the usem interface is detected. */
250 #define CCM_REG_USEM_LENGTH_MIS 0xd017c
251 /* [RW 3] The weight of the input usem in the WRR mechanism. 0 stands for
252 weight 8 (the most prioritised); 1 stands for weight 1(least
253 prioritised); 2 stands for weight 2; tc. */
254 #define CCM_REG_USEM_WEIGHT 0xd00a8
255 /* [RW 1] Input xsem Interface enable. If 0 - the valid input is
256 disregarded; acknowledge output is deasserted; all other signals are
257 treated as usual; if 1 - normal activity. */
258 #define CCM_REG_XSEM_IFEN 0xd0020
259 /* [RC 1] Set when the message length mismatch (relative to last indication)
260 at the xsem interface is detected. */
261 #define CCM_REG_XSEM_LENGTH_MIS 0xd0178
262 /* [RW 3] The weight of the input xsem in the WRR mechanism. 0 stands for
263 weight 8 (the most prioritised); 1 stands for weight 1(least
264 prioritised); 2 stands for weight 2; tc. */
265 #define CCM_REG_XSEM_WEIGHT 0xd00a4
266 /* [RW 19] Indirect access to the descriptor table of the XX protection
267 mechanism. The fields are: [5:0] - message length; [12:6] - message
268 pointer; 18:13] - next pointer. */
269 #define CCM_REG_XX_DESCR_TABLE 0xd0300
270 #define CCM_REG_XX_DESCR_TABLE_SIZE 36
271 /* [R 7] Used to read the value of XX protection Free counter. */
272 #define CCM_REG_XX_FREE 0xd0184
273 /* [RW 6] Initial value for the credit counter; responsible for fulfilling
274 of the Input Stage XX protection buffer by the XX protection pending
275 messages. Max credit available - 127. Write writes the initial credit
276 value; read returns the current value of the credit counter. Must be
277 initialized to maximum XX protected message size - 2 at start-up. */
278 #define CCM_REG_XX_INIT_CRD 0xd0220
279 /* [RW 7] The maximum number of pending messages; which may be stored in XX
280 protection. At read the ~ccm_registers_xx_free.xx_free counter is read.
281 At write comprises the start value of the ~ccm_registers_xx_free.xx_free
283 #define CCM_REG_XX_MSG_NUM 0xd0224
284 /* [RW 8] The Event ID; sent to the STORM in case of XX overflow. */
285 #define CCM_REG_XX_OVFL_EVNT_ID 0xd0044
286 /* [RW 18] Indirect access to the XX table of the XX protection mechanism.
287 The fields are: [5:0] - tail pointer; 11:6] - Link List size; 17:12] -
289 #define CCM_REG_XX_TABLE 0xd0280
290 #define CDU_REG_CDU_CHK_MASK0 0x101000
291 #define CDU_REG_CDU_CHK_MASK1 0x101004
292 #define CDU_REG_CDU_CONTROL0 0x101008
293 #define CDU_REG_CDU_DEBUG 0x101010
294 #define CDU_REG_CDU_GLOBAL_PARAMS 0x101020
295 /* [RW 7] Interrupt mask register #0 read/write */
296 #define CDU_REG_CDU_INT_MASK 0x10103c
297 /* [R 7] Interrupt register #0 read */
298 #define CDU_REG_CDU_INT_STS 0x101030
299 /* [RW 5] Parity mask register #0 read/write */
300 #define CDU_REG_CDU_PRTY_MASK 0x10104c
301 /* [R 5] Parity register #0 read */
302 #define CDU_REG_CDU_PRTY_STS 0x101040
303 /* [RC 32] logging of error data in case of a CDU load error:
304 {expected_cid[15:0]; xpected_type[2:0]; xpected_region[2:0]; ctive_error;
305 ype_error; ctual_active; ctual_compressed_context}; */
306 #define CDU_REG_ERROR_DATA 0x101014
307 /* [WB 216] L1TT ram access. each entry has the following format :
308 {mrege_regions[7:0]; ffset12[5:0]...offset0[5:0];
309 ength12[5:0]...length0[5:0]; d12[3:0]...id0[3:0]} */
310 #define CDU_REG_L1TT 0x101800
311 /* [WB 24] MATT ram access. each entry has the following
312 format:{RegionLength[11:0]; egionOffset[11:0]} */
313 #define CDU_REG_MATT 0x101100
314 /* [RW 1] when this bit is set the CDU operates in e1hmf mode */
315 #define CDU_REG_MF_MODE 0x101050
316 /* [R 1] indication the initializing the activity counter by the hardware
318 #define CFC_REG_AC_INIT_DONE 0x104078
319 /* [RW 13] activity counter ram access */
320 #define CFC_REG_ACTIVITY_COUNTER 0x104400
321 #define CFC_REG_ACTIVITY_COUNTER_SIZE 256
322 /* [R 1] indication the initializing the cams by the hardware was done. */
323 #define CFC_REG_CAM_INIT_DONE 0x10407c
324 /* [RW 2] Interrupt mask register #0 read/write */
325 #define CFC_REG_CFC_INT_MASK 0x104108
326 /* [R 2] Interrupt register #0 read */
327 #define CFC_REG_CFC_INT_STS 0x1040fc
328 /* [RC 2] Interrupt register #0 read clear */
329 #define CFC_REG_CFC_INT_STS_CLR 0x104100
330 /* [RW 4] Parity mask register #0 read/write */
331 #define CFC_REG_CFC_PRTY_MASK 0x104118
332 /* [R 4] Parity register #0 read */
333 #define CFC_REG_CFC_PRTY_STS 0x10410c
334 /* [RW 21] CID cam access (21:1 - Data; alid - 0) */
335 #define CFC_REG_CID_CAM 0x104800
336 #define CFC_REG_CONTROL0 0x104028
337 #define CFC_REG_DEBUG0 0x104050
338 /* [RW 14] indicates per error (in #cfc_registers_cfc_error_vector.cfc_error
339 vector) whether the cfc should be disabled upon it */
340 #define CFC_REG_DISABLE_ON_ERROR 0x104044
341 /* [RC 14] CFC error vector. when the CFC detects an internal error it will
342 set one of these bits. the bit description can be found in CFC
344 #define CFC_REG_ERROR_VECTOR 0x10403c
345 /* [WB 93] LCID info ram access */
346 #define CFC_REG_INFO_RAM 0x105000
347 #define CFC_REG_INFO_RAM_SIZE 1024
348 #define CFC_REG_INIT_REG 0x10404c
349 #define CFC_REG_INTERFACES 0x104058
350 /* [RW 24] {weight_load_client7[2:0] to weight_load_client0[2:0]}. this
351 field allows changing the priorities of the weighted-round-robin arbiter
352 which selects which CFC load client should be served next */
353 #define CFC_REG_LCREQ_WEIGHTS 0x104084
354 /* [RW 16] Link List ram access; data = {prev_lcid; ext_lcid} */
355 #define CFC_REG_LINK_LIST 0x104c00
356 #define CFC_REG_LINK_LIST_SIZE 256
357 /* [R 1] indication the initializing the link list by the hardware was done. */
358 #define CFC_REG_LL_INIT_DONE 0x104074
359 /* [R 9] Number of allocated LCIDs which are at empty state */
360 #define CFC_REG_NUM_LCIDS_ALLOC 0x104020
361 /* [R 9] Number of Arriving LCIDs in Link List Block */
362 #define CFC_REG_NUM_LCIDS_ARRIVING 0x104004
363 /* [R 9] Number of Leaving LCIDs in Link List Block */
364 #define CFC_REG_NUM_LCIDS_LEAVING 0x104018
365 /* [RW 8] The event id for aggregated interrupt 0 */
366 #define CSDM_REG_AGG_INT_EVENT_0 0xc2038
367 #define CSDM_REG_AGG_INT_EVENT_10 0xc2060
368 #define CSDM_REG_AGG_INT_EVENT_11 0xc2064
369 #define CSDM_REG_AGG_INT_EVENT_12 0xc2068
370 #define CSDM_REG_AGG_INT_EVENT_13 0xc206c
371 #define CSDM_REG_AGG_INT_EVENT_14 0xc2070
372 #define CSDM_REG_AGG_INT_EVENT_15 0xc2074
373 #define CSDM_REG_AGG_INT_EVENT_16 0xc2078
374 #define CSDM_REG_AGG_INT_EVENT_2 0xc2040
375 #define CSDM_REG_AGG_INT_EVENT_3 0xc2044
376 #define CSDM_REG_AGG_INT_EVENT_4 0xc2048
377 #define CSDM_REG_AGG_INT_EVENT_5 0xc204c
378 #define CSDM_REG_AGG_INT_EVENT_6 0xc2050
379 #define CSDM_REG_AGG_INT_EVENT_7 0xc2054
380 #define CSDM_REG_AGG_INT_EVENT_8 0xc2058
381 #define CSDM_REG_AGG_INT_EVENT_9 0xc205c
382 /* [RW 1] For each aggregated interrupt index whether the mode is normal (0)
383 or auto-mask-mode (1) */
384 #define CSDM_REG_AGG_INT_MODE_10 0xc21e0
385 #define CSDM_REG_AGG_INT_MODE_11 0xc21e4
386 #define CSDM_REG_AGG_INT_MODE_12 0xc21e8
387 #define CSDM_REG_AGG_INT_MODE_13 0xc21ec
388 #define CSDM_REG_AGG_INT_MODE_14 0xc21f0
389 #define CSDM_REG_AGG_INT_MODE_15 0xc21f4
390 #define CSDM_REG_AGG_INT_MODE_16 0xc21f8
391 #define CSDM_REG_AGG_INT_MODE_6 0xc21d0
392 #define CSDM_REG_AGG_INT_MODE_7 0xc21d4
393 #define CSDM_REG_AGG_INT_MODE_8 0xc21d8
394 #define CSDM_REG_AGG_INT_MODE_9 0xc21dc
395 /* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */
396 #define CSDM_REG_CFC_RSP_START_ADDR 0xc2008
397 /* [RW 16] The maximum value of the competion counter #0 */
398 #define CSDM_REG_CMP_COUNTER_MAX0 0xc201c
399 /* [RW 16] The maximum value of the competion counter #1 */
400 #define CSDM_REG_CMP_COUNTER_MAX1 0xc2020
401 /* [RW 16] The maximum value of the competion counter #2 */
402 #define CSDM_REG_CMP_COUNTER_MAX2 0xc2024
403 /* [RW 16] The maximum value of the competion counter #3 */
404 #define CSDM_REG_CMP_COUNTER_MAX3 0xc2028
405 /* [RW 13] The start address in the internal RAM for the completion
407 #define CSDM_REG_CMP_COUNTER_START_ADDR 0xc200c
408 /* [RW 32] Interrupt mask register #0 read/write */
409 #define CSDM_REG_CSDM_INT_MASK_0 0xc229c
410 #define CSDM_REG_CSDM_INT_MASK_1 0xc22ac
411 /* [R 32] Interrupt register #0 read */
412 #define CSDM_REG_CSDM_INT_STS_0 0xc2290
413 #define CSDM_REG_CSDM_INT_STS_1 0xc22a0
414 /* [RW 11] Parity mask register #0 read/write */
415 #define CSDM_REG_CSDM_PRTY_MASK 0xc22bc
416 /* [R 11] Parity register #0 read */
417 #define CSDM_REG_CSDM_PRTY_STS 0xc22b0
418 #define CSDM_REG_ENABLE_IN1 0xc2238
419 #define CSDM_REG_ENABLE_IN2 0xc223c
420 #define CSDM_REG_ENABLE_OUT1 0xc2240
421 #define CSDM_REG_ENABLE_OUT2 0xc2244
422 /* [RW 4] The initial number of messages that can be sent to the pxp control
423 interface without receiving any ACK. */
424 #define CSDM_REG_INIT_CREDIT_PXP_CTRL 0xc24bc
425 /* [ST 32] The number of ACK after placement messages received */
426 #define CSDM_REG_NUM_OF_ACK_AFTER_PLACE 0xc227c
427 /* [ST 32] The number of packet end messages received from the parser */
428 #define CSDM_REG_NUM_OF_PKT_END_MSG 0xc2274
429 /* [ST 32] The number of requests received from the pxp async if */
430 #define CSDM_REG_NUM_OF_PXP_ASYNC_REQ 0xc2278
431 /* [ST 32] The number of commands received in queue 0 */
432 #define CSDM_REG_NUM_OF_Q0_CMD 0xc2248
433 /* [ST 32] The number of commands received in queue 10 */
434 #define CSDM_REG_NUM_OF_Q10_CMD 0xc226c
435 /* [ST 32] The number of commands received in queue 11 */
436 #define CSDM_REG_NUM_OF_Q11_CMD 0xc2270
437 /* [ST 32] The number of commands received in queue 1 */
438 #define CSDM_REG_NUM_OF_Q1_CMD 0xc224c
439 /* [ST 32] The number of commands received in queue 3 */
440 #define CSDM_REG_NUM_OF_Q3_CMD 0xc2250
441 /* [ST 32] The number of commands received in queue 4 */
442 #define CSDM_REG_NUM_OF_Q4_CMD 0xc2254
443 /* [ST 32] The number of commands received in queue 5 */
444 #define CSDM_REG_NUM_OF_Q5_CMD 0xc2258
445 /* [ST 32] The number of commands received in queue 6 */
446 #define CSDM_REG_NUM_OF_Q6_CMD 0xc225c
447 /* [ST 32] The number of commands received in queue 7 */
448 #define CSDM_REG_NUM_OF_Q7_CMD 0xc2260
449 /* [ST 32] The number of commands received in queue 8 */
450 #define CSDM_REG_NUM_OF_Q8_CMD 0xc2264
451 /* [ST 32] The number of commands received in queue 9 */
452 #define CSDM_REG_NUM_OF_Q9_CMD 0xc2268
453 /* [RW 13] The start address in the internal RAM for queue counters */
454 #define CSDM_REG_Q_COUNTER_START_ADDR 0xc2010
455 /* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */
456 #define CSDM_REG_RSP_PXP_CTRL_RDATA_EMPTY 0xc2548
457 /* [R 1] parser fifo empty in sdm_sync block */
458 #define CSDM_REG_SYNC_PARSER_EMPTY 0xc2550
459 /* [R 1] parser serial fifo empty in sdm_sync block */
460 #define CSDM_REG_SYNC_SYNC_EMPTY 0xc2558
461 /* [RW 32] Tick for timer counter. Applicable only when
462 ~csdm_registers_timer_tick_enable.timer_tick_enable =1 */
463 #define CSDM_REG_TIMER_TICK 0xc2000
464 /* [RW 5] The number of time_slots in the arbitration cycle */
465 #define CSEM_REG_ARB_CYCLE_SIZE 0x200034
466 /* [RW 3] The source that is associated with arbitration element 0. Source
467 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
468 sleeping thread with priority 1; 4- sleeping thread with priority 2 */
469 #define CSEM_REG_ARB_ELEMENT0 0x200020
470 /* [RW 3] The source that is associated with arbitration element 1. Source
471 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
472 sleeping thread with priority 1; 4- sleeping thread with priority 2.
473 Could not be equal to register ~csem_registers_arb_element0.arb_element0 */
474 #define CSEM_REG_ARB_ELEMENT1 0x200024
475 /* [RW 3] The source that is associated with arbitration element 2. Source
476 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
477 sleeping thread with priority 1; 4- sleeping thread with priority 2.
478 Could not be equal to register ~csem_registers_arb_element0.arb_element0
479 and ~csem_registers_arb_element1.arb_element1 */
480 #define CSEM_REG_ARB_ELEMENT2 0x200028
481 /* [RW 3] The source that is associated with arbitration element 3. Source
482 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
483 sleeping thread with priority 1; 4- sleeping thread with priority 2.Could
484 not be equal to register ~csem_registers_arb_element0.arb_element0 and
485 ~csem_registers_arb_element1.arb_element1 and
486 ~csem_registers_arb_element2.arb_element2 */
487 #define CSEM_REG_ARB_ELEMENT3 0x20002c
488 /* [RW 3] The source that is associated with arbitration element 4. Source
489 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
490 sleeping thread with priority 1; 4- sleeping thread with priority 2.
491 Could not be equal to register ~csem_registers_arb_element0.arb_element0
492 and ~csem_registers_arb_element1.arb_element1 and
493 ~csem_registers_arb_element2.arb_element2 and
494 ~csem_registers_arb_element3.arb_element3 */
495 #define CSEM_REG_ARB_ELEMENT4 0x200030
496 /* [RW 32] Interrupt mask register #0 read/write */
497 #define CSEM_REG_CSEM_INT_MASK_0 0x200110
498 #define CSEM_REG_CSEM_INT_MASK_1 0x200120
499 /* [R 32] Interrupt register #0 read */
500 #define CSEM_REG_CSEM_INT_STS_0 0x200104
501 #define CSEM_REG_CSEM_INT_STS_1 0x200114
502 /* [RW 32] Parity mask register #0 read/write */
503 #define CSEM_REG_CSEM_PRTY_MASK_0 0x200130
504 #define CSEM_REG_CSEM_PRTY_MASK_1 0x200140
505 /* [R 32] Parity register #0 read */
506 #define CSEM_REG_CSEM_PRTY_STS_0 0x200124
507 #define CSEM_REG_CSEM_PRTY_STS_1 0x200134
508 #define CSEM_REG_ENABLE_IN 0x2000a4
509 #define CSEM_REG_ENABLE_OUT 0x2000a8
510 /* [RW 32] This address space contains all registers and memories that are
511 placed in SEM_FAST block. The SEM_FAST registers are described in
512 appendix B. In order to access the sem_fast registers the base address
513 ~fast_memory.fast_memory should be added to eachsem_fast register offset. */
514 #define CSEM_REG_FAST_MEMORY 0x220000
515 /* [RW 1] Disables input messages from FIC0 May be updated during run_time
517 #define CSEM_REG_FIC0_DISABLE 0x200224
518 /* [RW 1] Disables input messages from FIC1 May be updated during run_time
520 #define CSEM_REG_FIC1_DISABLE 0x200234
521 /* [RW 15] Interrupt table Read and write access to it is not possible in
522 the middle of the work */
523 #define CSEM_REG_INT_TABLE 0x200400
524 /* [ST 24] Statistics register. The number of messages that entered through
526 #define CSEM_REG_MSG_NUM_FIC0 0x200000
527 /* [ST 24] Statistics register. The number of messages that entered through
529 #define CSEM_REG_MSG_NUM_FIC1 0x200004
530 /* [ST 24] Statistics register. The number of messages that were sent to
532 #define CSEM_REG_MSG_NUM_FOC0 0x200008
533 /* [ST 24] Statistics register. The number of messages that were sent to
535 #define CSEM_REG_MSG_NUM_FOC1 0x20000c
536 /* [ST 24] Statistics register. The number of messages that were sent to
538 #define CSEM_REG_MSG_NUM_FOC2 0x200010
539 /* [ST 24] Statistics register. The number of messages that were sent to
541 #define CSEM_REG_MSG_NUM_FOC3 0x200014
542 /* [RW 1] Disables input messages from the passive buffer May be updated
543 during run_time by the microcode */
544 #define CSEM_REG_PAS_DISABLE 0x20024c
545 /* [WB 128] Debug only. Passive buffer memory */
546 #define CSEM_REG_PASSIVE_BUFFER 0x202000
547 /* [WB 46] pram memory. B45 is parity; b[44:0] - data. */
548 #define CSEM_REG_PRAM 0x240000
549 /* [R 16] Valid sleeping threads indication have bit per thread */
550 #define CSEM_REG_SLEEP_THREADS_VALID 0x20026c
551 /* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */
552 #define CSEM_REG_SLOW_EXT_STORE_EMPTY 0x2002a0
553 /* [RW 16] List of free threads . There is a bit per thread. */
554 #define CSEM_REG_THREADS_LIST 0x2002e4
555 /* [RW 3] The arbitration scheme of time_slot 0 */
556 #define CSEM_REG_TS_0_AS 0x200038
557 /* [RW 3] The arbitration scheme of time_slot 10 */
558 #define CSEM_REG_TS_10_AS 0x200060
559 /* [RW 3] The arbitration scheme of time_slot 11 */
560 #define CSEM_REG_TS_11_AS 0x200064
561 /* [RW 3] The arbitration scheme of time_slot 12 */
562 #define CSEM_REG_TS_12_AS 0x200068
563 /* [RW 3] The arbitration scheme of time_slot 13 */
564 #define CSEM_REG_TS_13_AS 0x20006c
565 /* [RW 3] The arbitration scheme of time_slot 14 */
566 #define CSEM_REG_TS_14_AS 0x200070
567 /* [RW 3] The arbitration scheme of time_slot 15 */
568 #define CSEM_REG_TS_15_AS 0x200074
569 /* [RW 3] The arbitration scheme of time_slot 16 */
570 #define CSEM_REG_TS_16_AS 0x200078
571 /* [RW 3] The arbitration scheme of time_slot 17 */
572 #define CSEM_REG_TS_17_AS 0x20007c
573 /* [RW 3] The arbitration scheme of time_slot 18 */
574 #define CSEM_REG_TS_18_AS 0x200080
575 /* [RW 3] The arbitration scheme of time_slot 1 */
576 #define CSEM_REG_TS_1_AS 0x20003c
577 /* [RW 3] The arbitration scheme of time_slot 2 */
578 #define CSEM_REG_TS_2_AS 0x200040
579 /* [RW 3] The arbitration scheme of time_slot 3 */
580 #define CSEM_REG_TS_3_AS 0x200044
581 /* [RW 3] The arbitration scheme of time_slot 4 */
582 #define CSEM_REG_TS_4_AS 0x200048
583 /* [RW 3] The arbitration scheme of time_slot 5 */
584 #define CSEM_REG_TS_5_AS 0x20004c
585 /* [RW 3] The arbitration scheme of time_slot 6 */
586 #define CSEM_REG_TS_6_AS 0x200050
587 /* [RW 3] The arbitration scheme of time_slot 7 */
588 #define CSEM_REG_TS_7_AS 0x200054
589 /* [RW 3] The arbitration scheme of time_slot 8 */
590 #define CSEM_REG_TS_8_AS 0x200058
591 /* [RW 3] The arbitration scheme of time_slot 9 */
592 #define CSEM_REG_TS_9_AS 0x20005c
593 /* [RW 1] Parity mask register #0 read/write */
594 #define DBG_REG_DBG_PRTY_MASK 0xc0a8
595 /* [R 1] Parity register #0 read */
596 #define DBG_REG_DBG_PRTY_STS 0xc09c
597 /* [RW 32] Commands memory. The address to command X; row Y is to calculated
599 #define DMAE_REG_CMD_MEM 0x102400
600 #define DMAE_REG_CMD_MEM_SIZE 224
601 /* [RW 1] If 0 - the CRC-16c initial value is all zeroes; if 1 - the CRC-16c
602 initial value is all ones. */
603 #define DMAE_REG_CRC16C_INIT 0x10201c
604 /* [RW 1] If 0 - the CRC-16 T10 initial value is all zeroes; if 1 - the
605 CRC-16 T10 initial value is all ones. */
606 #define DMAE_REG_CRC16T10_INIT 0x102020
607 /* [RW 2] Interrupt mask register #0 read/write */
608 #define DMAE_REG_DMAE_INT_MASK 0x102054
609 /* [RW 4] Parity mask register #0 read/write */
610 #define DMAE_REG_DMAE_PRTY_MASK 0x102064
611 /* [R 4] Parity register #0 read */
612 #define DMAE_REG_DMAE_PRTY_STS 0x102058
613 /* [RW 1] Command 0 go. */
614 #define DMAE_REG_GO_C0 0x102080
615 /* [RW 1] Command 1 go. */
616 #define DMAE_REG_GO_C1 0x102084
617 /* [RW 1] Command 10 go. */
618 #define DMAE_REG_GO_C10 0x102088
619 /* [RW 1] Command 11 go. */
620 #define DMAE_REG_GO_C11 0x10208c
621 /* [RW 1] Command 12 go. */
622 #define DMAE_REG_GO_C12 0x102090
623 /* [RW 1] Command 13 go. */
624 #define DMAE_REG_GO_C13 0x102094
625 /* [RW 1] Command 14 go. */
626 #define DMAE_REG_GO_C14 0x102098
627 /* [RW 1] Command 15 go. */
628 #define DMAE_REG_GO_C15 0x10209c
629 /* [RW 1] Command 2 go. */
630 #define DMAE_REG_GO_C2 0x1020a0
631 /* [RW 1] Command 3 go. */
632 #define DMAE_REG_GO_C3 0x1020a4
633 /* [RW 1] Command 4 go. */
634 #define DMAE_REG_GO_C4 0x1020a8
635 /* [RW 1] Command 5 go. */
636 #define DMAE_REG_GO_C5 0x1020ac
637 /* [RW 1] Command 6 go. */
638 #define DMAE_REG_GO_C6 0x1020b0
639 /* [RW 1] Command 7 go. */
640 #define DMAE_REG_GO_C7 0x1020b4
641 /* [RW 1] Command 8 go. */
642 #define DMAE_REG_GO_C8 0x1020b8
643 /* [RW 1] Command 9 go. */
644 #define DMAE_REG_GO_C9 0x1020bc
645 /* [RW 1] DMAE GRC Interface (Target; aster) enable. If 0 - the acknowledge
646 input is disregarded; valid is deasserted; all other signals are treated
647 as usual; if 1 - normal activity. */
648 #define DMAE_REG_GRC_IFEN 0x102008
649 /* [RW 1] DMAE PCI Interface (Request; ead; rite) enable. If 0 - the
650 acknowledge input is disregarded; valid is deasserted; full is asserted;
651 all other signals are treated as usual; if 1 - normal activity. */
652 #define DMAE_REG_PCI_IFEN 0x102004
653 /* [RW 4] DMAE- PCI Request Interface initial credit. Write writes the
654 initial value to the credit counter; related to the address. Read returns
655 the current value of the counter. */
656 #define DMAE_REG_PXP_REQ_INIT_CRD 0x1020c0
657 /* [RW 8] Aggregation command. */
658 #define DORQ_REG_AGG_CMD0 0x170060
659 /* [RW 8] Aggregation command. */
660 #define DORQ_REG_AGG_CMD1 0x170064
661 /* [RW 8] Aggregation command. */
662 #define DORQ_REG_AGG_CMD2 0x170068
663 /* [RW 8] Aggregation command. */
664 #define DORQ_REG_AGG_CMD3 0x17006c
665 /* [RW 28] UCM Header. */
666 #define DORQ_REG_CMHEAD_RX 0x170050
667 /* [RW 32] Doorbell address for RBC doorbells (function 0). */
668 #define DORQ_REG_DB_ADDR0 0x17008c
669 /* [RW 5] Interrupt mask register #0 read/write */
670 #define DORQ_REG_DORQ_INT_MASK 0x170180
671 /* [R 5] Interrupt register #0 read */
672 #define DORQ_REG_DORQ_INT_STS 0x170174
673 /* [RC 5] Interrupt register #0 read clear */
674 #define DORQ_REG_DORQ_INT_STS_CLR 0x170178
675 /* [RW 2] Parity mask register #0 read/write */
676 #define DORQ_REG_DORQ_PRTY_MASK 0x170190
677 /* [R 2] Parity register #0 read */
678 #define DORQ_REG_DORQ_PRTY_STS 0x170184
679 /* [RW 8] The address to write the DPM CID to STORM. */
680 #define DORQ_REG_DPM_CID_ADDR 0x170044
681 /* [RW 5] The DPM mode CID extraction offset. */
682 #define DORQ_REG_DPM_CID_OFST 0x170030
683 /* [RW 12] The threshold of the DQ FIFO to send the almost full interrupt. */
684 #define DORQ_REG_DQ_FIFO_AFULL_TH 0x17007c
685 /* [RW 12] The threshold of the DQ FIFO to send the full interrupt. */
686 #define DORQ_REG_DQ_FIFO_FULL_TH 0x170078
687 /* [R 13] Current value of the DQ FIFO fill level according to following
688 pointer. The range is 0 - 256 FIFO rows; where each row stands for the
690 #define DORQ_REG_DQ_FILL_LVLF 0x1700a4
691 /* [R 1] DQ FIFO full status. Is set; when FIFO filling level is more or
692 equal to full threshold; reset on full clear. */
693 #define DORQ_REG_DQ_FULL_ST 0x1700c0
694 /* [RW 28] The value sent to CM header in the case of CFC load error. */
695 #define DORQ_REG_ERR_CMHEAD 0x170058
696 #define DORQ_REG_IF_EN 0x170004
697 #define DORQ_REG_MODE_ACT 0x170008
698 /* [RW 5] The normal mode CID extraction offset. */
699 #define DORQ_REG_NORM_CID_OFST 0x17002c
700 /* [RW 28] TCM Header when only TCP context is loaded. */
701 #define DORQ_REG_NORM_CMHEAD_TX 0x17004c
702 /* [RW 3] The number of simultaneous outstanding requests to Context Fetch
704 #define DORQ_REG_OUTST_REQ 0x17003c
705 #define DORQ_REG_REGN 0x170038
706 /* [R 4] Current value of response A counter credit. Initial credit is
707 configured through write to ~dorq_registers_rsp_init_crd.rsp_init_crd
709 #define DORQ_REG_RSPA_CRD_CNT 0x1700ac
710 /* [R 4] Current value of response B counter credit. Initial credit is
711 configured through write to ~dorq_registers_rsp_init_crd.rsp_init_crd
713 #define DORQ_REG_RSPB_CRD_CNT 0x1700b0
714 /* [RW 4] The initial credit at the Doorbell Response Interface. The write
715 writes the same initial credit to the rspa_crd_cnt and rspb_crd_cnt. The
716 read reads this written value. */
717 #define DORQ_REG_RSP_INIT_CRD 0x170048
718 /* [RW 4] Initial activity counter value on the load request; when the
720 #define DORQ_REG_SHRT_ACT_CNT 0x170070
721 /* [RW 28] TCM Header when both ULP and TCP context is loaded. */
722 #define DORQ_REG_SHRT_CMHEAD 0x170054
723 #define HC_CONFIG_0_REG_ATTN_BIT_EN_0 (0x1<<4)
724 #define HC_CONFIG_0_REG_INT_LINE_EN_0 (0x1<<3)
725 #define HC_CONFIG_0_REG_MSI_ATTN_EN_0 (0x1<<7)
726 #define HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 (0x1<<2)
727 #define HC_CONFIG_0_REG_SINGLE_ISR_EN_0 (0x1<<1)
728 #define HC_REG_AGG_INT_0 0x108050
729 #define HC_REG_AGG_INT_1 0x108054
730 #define HC_REG_ATTN_BIT 0x108120
731 #define HC_REG_ATTN_IDX 0x108100
732 #define HC_REG_ATTN_MSG0_ADDR_L 0x108018
733 #define HC_REG_ATTN_MSG1_ADDR_L 0x108020
734 #define HC_REG_ATTN_NUM_P0 0x108038
735 #define HC_REG_ATTN_NUM_P1 0x10803c
736 #define HC_REG_COMMAND_REG 0x108180
737 #define HC_REG_CONFIG_0 0x108000
738 #define HC_REG_CONFIG_1 0x108004
739 #define HC_REG_FUNC_NUM_P0 0x1080ac
740 #define HC_REG_FUNC_NUM_P1 0x1080b0
741 /* [RW 3] Parity mask register #0 read/write */
742 #define HC_REG_HC_PRTY_MASK 0x1080a0
743 /* [R 3] Parity register #0 read */
744 #define HC_REG_HC_PRTY_STS 0x108094
745 #define HC_REG_INT_MASK 0x108108
746 #define HC_REG_LEADING_EDGE_0 0x108040
747 #define HC_REG_LEADING_EDGE_1 0x108048
748 #define HC_REG_P0_PROD_CONS 0x108200
749 #define HC_REG_P1_PROD_CONS 0x108400
750 #define HC_REG_PBA_COMMAND 0x108140
751 #define HC_REG_PCI_CONFIG_0 0x108010
752 #define HC_REG_PCI_CONFIG_1 0x108014
753 #define HC_REG_STATISTIC_COUNTERS 0x109000
754 #define HC_REG_TRAILING_EDGE_0 0x108044
755 #define HC_REG_TRAILING_EDGE_1 0x10804c
756 #define HC_REG_UC_RAM_ADDR_0 0x108028
757 #define HC_REG_UC_RAM_ADDR_1 0x108030
758 #define HC_REG_USTORM_ADDR_FOR_COALESCE 0x108068
759 #define HC_REG_VQID_0 0x108008
760 #define HC_REG_VQID_1 0x10800c
761 #define MCP_REG_MCPR_NVM_ACCESS_ENABLE 0x86424
762 #define MCP_REG_MCPR_NVM_ADDR 0x8640c
763 #define MCP_REG_MCPR_NVM_CFG4 0x8642c
764 #define MCP_REG_MCPR_NVM_COMMAND 0x86400
765 #define MCP_REG_MCPR_NVM_READ 0x86410
766 #define MCP_REG_MCPR_NVM_SW_ARB 0x86420
767 #define MCP_REG_MCPR_NVM_WRITE 0x86408
768 #define MCP_REG_MCPR_SCRATCH 0xa0000
769 /* [R 32] read first 32 bit after inversion of function 0. mapped as
770 follows: [0] NIG attention for function0; [1] NIG attention for
771 function1; [2] GPIO1 mcp; [3] GPIO2 mcp; [4] GPIO3 mcp; [5] GPIO4 mcp;
772 [6] GPIO1 function 1; [7] GPIO2 function 1; [8] GPIO3 function 1; [9]
773 GPIO4 function 1; [10] PCIE glue/PXP VPD event function0; [11] PCIE
774 glue/PXP VPD event function1; [12] PCIE glue/PXP Expansion ROM event0;
775 [13] PCIE glue/PXP Expansion ROM event1; [14] SPIO4; [15] SPIO5; [16]
776 MSI/X indication for mcp; [17] MSI/X indication for function 1; [18] BRB
777 Parity error; [19] BRB Hw interrupt; [20] PRS Parity error; [21] PRS Hw
778 interrupt; [22] SRC Parity error; [23] SRC Hw interrupt; [24] TSDM Parity
779 error; [25] TSDM Hw interrupt; [26] TCM Parity error; [27] TCM Hw
780 interrupt; [28] TSEMI Parity error; [29] TSEMI Hw interrupt; [30] PBF
781 Parity error; [31] PBF Hw interrupt; */
782 #define MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 0xa42c
783 #define MISC_REG_AEU_AFTER_INVERT_1_FUNC_1 0xa430
784 /* [R 32] read first 32 bit after inversion of mcp. mapped as follows: [0]
785 NIG attention for function0; [1] NIG attention for function1; [2] GPIO1
786 mcp; [3] GPIO2 mcp; [4] GPIO3 mcp; [5] GPIO4 mcp; [6] GPIO1 function 1;
787 [7] GPIO2 function 1; [8] GPIO3 function 1; [9] GPIO4 function 1; [10]
788 PCIE glue/PXP VPD event function0; [11] PCIE glue/PXP VPD event
789 function1; [12] PCIE glue/PXP Expansion ROM event0; [13] PCIE glue/PXP
790 Expansion ROM event1; [14] SPIO4; [15] SPIO5; [16] MSI/X indication for
791 mcp; [17] MSI/X indication for function 1; [18] BRB Parity error; [19]
792 BRB Hw interrupt; [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC
793 Parity error; [23] SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw
794 interrupt; [26] TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI
795 Parity error; [29] TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw
797 #define MISC_REG_AEU_AFTER_INVERT_1_MCP 0xa434
798 /* [R 32] read second 32 bit after inversion of function 0. mapped as
799 follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM
800 Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw
801 interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity
802 error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw
803 interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14]
804 NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error;
805 [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw
806 interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM
807 Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI
808 Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM
809 Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw
811 #define MISC_REG_AEU_AFTER_INVERT_2_FUNC_0 0xa438
812 #define MISC_REG_AEU_AFTER_INVERT_2_FUNC_1 0xa43c
813 /* [R 32] read second 32 bit after inversion of mcp. mapped as follows: [0]
814 PBClient Parity error; [1] PBClient Hw interrupt; [2] QM Parity error;
815 [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw interrupt;
816 [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity error; [9]
817 XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw interrupt; [12]
818 DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14] NIG Parity
819 error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error; [17] Vaux
820 PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw interrupt;
821 [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM Parity error;
822 [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI Hw interrupt;
823 [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM Parity error;
824 [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw interrupt; */
825 #define MISC_REG_AEU_AFTER_INVERT_2_MCP 0xa440
826 /* [R 32] read third 32 bit after inversion of function 0. mapped as
827 follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP Parity
828 error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error; [5]
829 PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw
830 interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity
831 error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC)
832 Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16]
833 pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20]
834 MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23]
835 SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW
836 timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3
837 func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General
839 #define MISC_REG_AEU_AFTER_INVERT_3_FUNC_0 0xa444
840 #define MISC_REG_AEU_AFTER_INVERT_3_FUNC_1 0xa448
841 /* [R 32] read third 32 bit after inversion of mcp. mapped as follows: [0]
842 CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP Parity error; [3] PXP
843 Hw interrupt; [4] PXPpciClockClient Parity error; [5] PXPpciClockClient
844 Hw interrupt; [6] CFC Parity error; [7] CFC Hw interrupt; [8] CDU Parity
845 error; [9] CDU Hw interrupt; [10] DMAE Parity error; [11] DMAE Hw
846 interrupt; [12] IGU (HC) Parity error; [13] IGU (HC) Hw interrupt; [14]
847 MISC Parity error; [15] MISC Hw interrupt; [16] pxp_misc_mps_attn; [17]
848 Flash event; [18] SMB event; [19] MCP attn0; [20] MCP attn1; [21] SW
849 timers attn_1 func0; [22] SW timers attn_2 func0; [23] SW timers attn_3
850 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW timers attn_1
851 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3 func1; [29] SW
852 timers attn_4 func1; [30] General attn0; [31] General attn1; */
853 #define MISC_REG_AEU_AFTER_INVERT_3_MCP 0xa44c
854 /* [R 32] read fourth 32 bit after inversion of function 0. mapped as
855 follows: [0] General attn2; [1] General attn3; [2] General attn4; [3]
856 General attn5; [4] General attn6; [5] General attn7; [6] General attn8;
857 [7] General attn9; [8] General attn10; [9] General attn11; [10] General
858 attn12; [11] General attn13; [12] General attn14; [13] General attn15;
859 [14] General attn16; [15] General attn17; [16] General attn18; [17]
860 General attn19; [18] General attn20; [19] General attn21; [20] Main power
861 interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN
862 Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC
863 Latched timeout attention; [27] GRC Latched reserved access attention;
864 [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP
865 Latched ump_tx_parity; [31] MCP Latched scpad_parity; */
866 #define MISC_REG_AEU_AFTER_INVERT_4_FUNC_0 0xa450
867 #define MISC_REG_AEU_AFTER_INVERT_4_FUNC_1 0xa454
868 /* [R 32] read fourth 32 bit after inversion of mcp. mapped as follows: [0]
869 General attn2; [1] General attn3; [2] General attn4; [3] General attn5;
870 [4] General attn6; [5] General attn7; [6] General attn8; [7] General
871 attn9; [8] General attn10; [9] General attn11; [10] General attn12; [11]
872 General attn13; [12] General attn14; [13] General attn15; [14] General
873 attn16; [15] General attn17; [16] General attn18; [17] General attn19;
874 [18] General attn20; [19] General attn21; [20] Main power interrupt; [21]
875 RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN Latched attn; [24]
876 RBCU Latched attn; [25] RBCP Latched attn; [26] GRC Latched timeout
877 attention; [27] GRC Latched reserved access attention; [28] MCP Latched
878 rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP Latched
879 ump_tx_parity; [31] MCP Latched scpad_parity; */
880 #define MISC_REG_AEU_AFTER_INVERT_4_MCP 0xa458
881 /* [W 14] write to this register results with the clear of the latched
882 signals; one in d0 clears RBCR latch; one in d1 clears RBCT latch; one in
883 d2 clears RBCN latch; one in d3 clears RBCU latch; one in d4 clears RBCP
884 latch; one in d5 clears GRC Latched timeout attention; one in d6 clears
885 GRC Latched reserved access attention; one in d7 clears Latched
886 rom_parity; one in d8 clears Latched ump_rx_parity; one in d9 clears
887 Latched ump_tx_parity; one in d10 clears Latched scpad_parity (both
888 ports); one in d11 clears pxpv_misc_mps_attn; one in d12 clears
889 pxp_misc_exp_rom_attn0; one in d13 clears pxp_misc_exp_rom_attn1; read
890 from this register return zero */
891 #define MISC_REG_AEU_CLR_LATCH_SIGNAL 0xa45c
892 /* [RW 32] first 32b for enabling the output for function 0 output0. mapped
893 as follows: [0] NIG attention for function0; [1] NIG attention for
894 function1; [2] GPIO1 function 0; [3] GPIO2 function 0; [4] GPIO3 function
895 0; [5] GPIO4 function 0; [6] GPIO1 function 1; [7] GPIO2 function 1; [8]
896 GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event
897 function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP
898 Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14]
899 SPIO4; [15] SPIO5; [16] MSI/X indication for function 0; [17] MSI/X
900 indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt;
901 [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23]
902 SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26]
903 TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29]
904 TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */
905 #define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0 0xa06c
906 #define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_1 0xa07c
907 #define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_2 0xa08c
908 #define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_3 0xa09c
909 #define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_5 0xa0bc
910 #define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_6 0xa0cc
911 #define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_7 0xa0dc
912 /* [RW 32] first 32b for enabling the output for function 1 output0. mapped
913 as follows: [0] NIG attention for function0; [1] NIG attention for
914 function1; [2] GPIO1 function 1; [3] GPIO2 function 1; [4] GPIO3 function
915 1; [5] GPIO4 function 1; [6] GPIO1 function 1; [7] GPIO2 function 1; [8]
916 GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event
917 function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP
918 Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14]
919 SPIO4; [15] SPIO5; [16] MSI/X indication for function 1; [17] MSI/X
920 indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt;
921 [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23]
922 SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26]
923 TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29]
924 TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */
925 #define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 0xa10c
926 #define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_1 0xa11c
927 #define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_2 0xa12c
928 #define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_3 0xa13c
929 #define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_5 0xa15c
930 #define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_6 0xa16c
931 #define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_7 0xa17c
932 /* [RW 32] first 32b for enabling the output for close the gate nig. mapped
933 as follows: [0] NIG attention for function0; [1] NIG attention for
934 function1; [2] GPIO1 function 0; [3] GPIO2 function 0; [4] GPIO3 function
935 0; [5] GPIO4 function 0; [6] GPIO1 function 1; [7] GPIO2 function 1; [8]
936 GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event
937 function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP
938 Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14]
939 SPIO4; [15] SPIO5; [16] MSI/X indication for function 0; [17] MSI/X
940 indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt;
941 [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23]
942 SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26]
943 TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29]
944 TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */
945 #define MISC_REG_AEU_ENABLE1_NIG_0 0xa0ec
946 #define MISC_REG_AEU_ENABLE1_NIG_1 0xa18c
947 /* [RW 32] first 32b for enabling the output for close the gate pxp. mapped
948 as follows: [0] NIG attention for function0; [1] NIG attention for
949 function1; [2] GPIO1 function 0; [3] GPIO2 function 0; [4] GPIO3 function
950 0; [5] GPIO4 function 0; [6] GPIO1 function 1; [7] GPIO2 function 1; [8]
951 GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event
952 function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP
953 Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14]
954 SPIO4; [15] SPIO5; [16] MSI/X indication for function 0; [17] MSI/X
955 indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt;
956 [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23]
957 SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26]
958 TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29]
959 TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */
960 #define MISC_REG_AEU_ENABLE1_PXP_0 0xa0fc
961 #define MISC_REG_AEU_ENABLE1_PXP_1 0xa19c
962 /* [RW 32] second 32b for enabling the output for function 0 output0. mapped
963 as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM
964 Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw
965 interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity
966 error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw
967 interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14]
968 NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error;
969 [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw
970 interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM
971 Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI
972 Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM
973 Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw
975 #define MISC_REG_AEU_ENABLE2_FUNC_0_OUT_0 0xa070
976 #define MISC_REG_AEU_ENABLE2_FUNC_0_OUT_1 0xa080
977 /* [RW 32] second 32b for enabling the output for function 1 output0. mapped
978 as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM
979 Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw
980 interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity
981 error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw
982 interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14]
983 NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error;
984 [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw
985 interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM
986 Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI
987 Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM
988 Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw
990 #define MISC_REG_AEU_ENABLE2_FUNC_1_OUT_0 0xa110
991 #define MISC_REG_AEU_ENABLE2_FUNC_1_OUT_1 0xa120
992 /* [RW 32] second 32b for enabling the output for close the gate nig. mapped
993 as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM
994 Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw
995 interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity
996 error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw
997 interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14]
998 NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error;
999 [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw
1000 interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM
1001 Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI
1002 Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM
1003 Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw
1005 #define MISC_REG_AEU_ENABLE2_NIG_0 0xa0f0
1006 #define MISC_REG_AEU_ENABLE2_NIG_1 0xa190
1007 /* [RW 32] second 32b for enabling the output for close the gate pxp. mapped
1008 as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM
1009 Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw
1010 interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity
1011 error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw
1012 interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14]
1013 NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error;
1014 [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw
1015 interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM
1016 Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI
1017 Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM
1018 Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw
1020 #define MISC_REG_AEU_ENABLE2_PXP_0 0xa100
1021 #define MISC_REG_AEU_ENABLE2_PXP_1 0xa1a0
1022 /* [RW 32] third 32b for enabling the output for function 0 output0. mapped
1023 as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP
1024 Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error;
1025 [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw
1026 interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity
1027 error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC)
1028 Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16]
1029 pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20]
1030 MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23]
1031 SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW
1032 timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3
1033 func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General
1035 #define MISC_REG_AEU_ENABLE3_FUNC_0_OUT_0 0xa074
1036 #define MISC_REG_AEU_ENABLE3_FUNC_0_OUT_1 0xa084
1037 /* [RW 32] third 32b for enabling the output for function 1 output0. mapped
1038 as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP
1039 Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error;
1040 [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw
1041 interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity
1042 error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC)
1043 Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16]
1044 pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20]
1045 MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23]
1046 SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW
1047 timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3
1048 func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General
1050 #define MISC_REG_AEU_ENABLE3_FUNC_1_OUT_0 0xa114
1051 #define MISC_REG_AEU_ENABLE3_FUNC_1_OUT_1 0xa124
1052 /* [RW 32] third 32b for enabling the output for close the gate nig. mapped
1053 as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP
1054 Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error;
1055 [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw
1056 interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity
1057 error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC)
1058 Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16]
1059 pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20]
1060 MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23]
1061 SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW
1062 timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3
1063 func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General
1065 #define MISC_REG_AEU_ENABLE3_NIG_0 0xa0f4
1066 #define MISC_REG_AEU_ENABLE3_NIG_1 0xa194
1067 /* [RW 32] third 32b for enabling the output for close the gate pxp. mapped
1068 as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP
1069 Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error;
1070 [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw
1071 interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity
1072 error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC)
1073 Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16]
1074 pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20]
1075 MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23]
1076 SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW
1077 timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3
1078 func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General
1080 #define MISC_REG_AEU_ENABLE3_PXP_0 0xa104
1081 #define MISC_REG_AEU_ENABLE3_PXP_1 0xa1a4
1082 /* [RW 32] fourth 32b for enabling the output for function 0 output0.mapped
1083 as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3]
1084 General attn5; [4] General attn6; [5] General attn7; [6] General attn8;
1085 [7] General attn9; [8] General attn10; [9] General attn11; [10] General
1086 attn12; [11] General attn13; [12] General attn14; [13] General attn15;
1087 [14] General attn16; [15] General attn17; [16] General attn18; [17]
1088 General attn19; [18] General attn20; [19] General attn21; [20] Main power
1089 interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN
1090 Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC
1091 Latched timeout attention; [27] GRC Latched reserved access attention;
1092 [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP
1093 Latched ump_tx_parity; [31] MCP Latched scpad_parity; */
1094 #define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_0 0xa078
1095 #define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_2 0xa098
1096 #define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_4 0xa0b8
1097 #define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_5 0xa0c8
1098 #define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_6 0xa0d8
1099 #define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_7 0xa0e8
1100 /* [RW 32] fourth 32b for enabling the output for function 1 output0.mapped
1101 as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3]
1102 General attn5; [4] General attn6; [5] General attn7; [6] General attn8;
1103 [7] General attn9; [8] General attn10; [9] General attn11; [10] General
1104 attn12; [11] General attn13; [12] General attn14; [13] General attn15;
1105 [14] General attn16; [15] General attn17; [16] General attn18; [17]
1106 General attn19; [18] General attn20; [19] General attn21; [20] Main power
1107 interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN
1108 Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC
1109 Latched timeout attention; [27] GRC Latched reserved access attention;
1110 [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP
1111 Latched ump_tx_parity; [31] MCP Latched scpad_parity; */
1112 #define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_0 0xa118
1113 #define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_2 0xa138
1114 #define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_4 0xa158
1115 #define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_5 0xa168
1116 #define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_6 0xa178
1117 #define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_7 0xa188
1118 /* [RW 32] fourth 32b for enabling the output for close the gate nig.mapped
1119 as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3]
1120 General attn5; [4] General attn6; [5] General attn7; [6] General attn8;
1121 [7] General attn9; [8] General attn10; [9] General attn11; [10] General
1122 attn12; [11] General attn13; [12] General attn14; [13] General attn15;
1123 [14] General attn16; [15] General attn17; [16] General attn18; [17]
1124 General attn19; [18] General attn20; [19] General attn21; [20] Main power
1125 interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN
1126 Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC
1127 Latched timeout attention; [27] GRC Latched reserved access attention;
1128 [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP
1129 Latched ump_tx_parity; [31] MCP Latched scpad_parity; */
1130 #define MISC_REG_AEU_ENABLE4_NIG_0 0xa0f8
1131 #define MISC_REG_AEU_ENABLE4_NIG_1 0xa198
1132 /* [RW 32] fourth 32b for enabling the output for close the gate pxp.mapped
1133 as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3]
1134 General attn5; [4] General attn6; [5] General attn7; [6] General attn8;
1135 [7] General attn9; [8] General attn10; [9] General attn11; [10] General
1136 attn12; [11] General attn13; [12] General attn14; [13] General attn15;
1137 [14] General attn16; [15] General attn17; [16] General attn18; [17]
1138 General attn19; [18] General attn20; [19] General attn21; [20] Main power
1139 interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN
1140 Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC
1141 Latched timeout attention; [27] GRC Latched reserved access attention;
1142 [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP
1143 Latched ump_tx_parity; [31] MCP Latched scpad_parity; */
1144 #define MISC_REG_AEU_ENABLE4_PXP_0 0xa108
1145 #define MISC_REG_AEU_ENABLE4_PXP_1 0xa1a8
1146 /* [RW 1] set/clr general attention 0; this will set/clr bit 94 in the aeu
1148 #define MISC_REG_AEU_GENERAL_ATTN_0 0xa000
1149 #define MISC_REG_AEU_GENERAL_ATTN_1 0xa004
1150 #define MISC_REG_AEU_GENERAL_ATTN_10 0xa028
1151 #define MISC_REG_AEU_GENERAL_ATTN_11 0xa02c
1152 #define MISC_REG_AEU_GENERAL_ATTN_12 0xa030
1153 #define MISC_REG_AEU_GENERAL_ATTN_2 0xa008
1154 #define MISC_REG_AEU_GENERAL_ATTN_3 0xa00c
1155 #define MISC_REG_AEU_GENERAL_ATTN_4 0xa010
1156 #define MISC_REG_AEU_GENERAL_ATTN_5 0xa014
1157 #define MISC_REG_AEU_GENERAL_ATTN_6 0xa018
1158 #define MISC_REG_AEU_GENERAL_ATTN_7 0xa01c
1159 #define MISC_REG_AEU_GENERAL_ATTN_8 0xa020
1160 #define MISC_REG_AEU_GENERAL_ATTN_9 0xa024
1161 #define MISC_REG_AEU_GENERAL_MASK 0xa61c
1162 /* [RW 32] first 32b for inverting the input for function 0; for each bit:
1163 0= do not invert; 1= invert; mapped as follows: [0] NIG attention for
1164 function0; [1] NIG attention for function1; [2] GPIO1 mcp; [3] GPIO2 mcp;
1165 [4] GPIO3 mcp; [5] GPIO4 mcp; [6] GPIO1 function 1; [7] GPIO2 function 1;
1166 [8] GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event
1167 function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP
1168 Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14]
1169 SPIO4; [15] SPIO5; [16] MSI/X indication for mcp; [17] MSI/X indication
1170 for function 1; [18] BRB Parity error; [19] BRB Hw interrupt; [20] PRS
1171 Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23] SRC Hw
1172 interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26] TCM
1173 Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29] TSEMI
1174 Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */
1175 #define MISC_REG_AEU_INVERTER_1_FUNC_0 0xa22c
1176 #define MISC_REG_AEU_INVERTER_1_FUNC_1 0xa23c
1177 /* [RW 32] second 32b for inverting the input for function 0; for each bit:
1178 0= do not invert; 1= invert. mapped as follows: [0] PBClient Parity
1179 error; [1] PBClient Hw interrupt; [2] QM Parity error; [3] QM Hw
1180 interrupt; [4] Timers Parity error; [5] Timers Hw interrupt; [6] XSDM
1181 Parity error; [7] XSDM Hw interrupt; [8] XCM Parity error; [9] XCM Hw
1182 interrupt; [10] XSEMI Parity error; [11] XSEMI Hw interrupt; [12]
1183 DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14] NIG Parity
1184 error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error; [17] Vaux
1185 PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw interrupt;
1186 [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM Parity error;
1187 [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI Hw interrupt;
1188 [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM Parity error;
1189 [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw interrupt; */
1190 #define MISC_REG_AEU_INVERTER_2_FUNC_0 0xa230
1191 #define MISC_REG_AEU_INVERTER_2_FUNC_1 0xa240
1192 /* [RW 10] [7:0] = mask 8 attention output signals toward IGU function0;
1193 [9:8] = raserved. Zero = mask; one = unmask */
1194 #define MISC_REG_AEU_MASK_ATTN_FUNC_0 0xa060
1195 #define MISC_REG_AEU_MASK_ATTN_FUNC_1 0xa064
1196 /* [RW 1] If set a system kill occurred */
1197 #define MISC_REG_AEU_SYS_KILL_OCCURRED 0xa610
1198 /* [RW 32] Represent the status of the input vector to the AEU when a system
1199 kill occurred. The register is reset in por reset. Mapped as follows: [0]
1200 NIG attention for function0; [1] NIG attention for function1; [2] GPIO1
1201 mcp; [3] GPIO2 mcp; [4] GPIO3 mcp; [5] GPIO4 mcp; [6] GPIO1 function 1;
1202 [7] GPIO2 function 1; [8] GPIO3 function 1; [9] GPIO4 function 1; [10]
1203 PCIE glue/PXP VPD event function0; [11] PCIE glue/PXP VPD event
1204 function1; [12] PCIE glue/PXP Expansion ROM event0; [13] PCIE glue/PXP
1205 Expansion ROM event1; [14] SPIO4; [15] SPIO5; [16] MSI/X indication for
1206 mcp; [17] MSI/X indication for function 1; [18] BRB Parity error; [19]
1207 BRB Hw interrupt; [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC
1208 Parity error; [23] SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw
1209 interrupt; [26] TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI
1210 Parity error; [29] TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw
1212 #define MISC_REG_AEU_SYS_KILL_STATUS_0 0xa600
1213 #define MISC_REG_AEU_SYS_KILL_STATUS_1 0xa604
1214 #define MISC_REG_AEU_SYS_KILL_STATUS_2 0xa608
1215 #define MISC_REG_AEU_SYS_KILL_STATUS_3 0xa60c
1216 /* [R 4] This field indicates the type of the device. '0' - 2 Ports; '1' - 1
1218 #define MISC_REG_BOND_ID 0xa400
1219 /* [R 8] These bits indicate the metal revision of the chip. This value
1220 starts at 0x00 for each all-layer tape-out and increments by one for each
1222 #define MISC_REG_CHIP_METAL 0xa404
1223 /* [R 16] These bits indicate the part number for the chip. */
1224 #define MISC_REG_CHIP_NUM 0xa408
1225 /* [R 4] These bits indicate the base revision of the chip. This value
1226 starts at 0x0 for the A0 tape-out and increments by one for each
1227 all-layer tape-out. */
1228 #define MISC_REG_CHIP_REV 0xa40c
1229 /* [RW 32] The following driver registers(1...16) represent 16 drivers and
1230 32 clients. Each client can be controlled by one driver only. One in each
1231 bit represent that this driver control the appropriate client (Ex: bit 5
1232 is set means this driver control client number 5). addr1 = set; addr0 =
1233 clear; read from both addresses will give the same result = status. write
1234 to address 1 will set a request to control all the clients that their
1235 appropriate bit (in the write command) is set. if the client is free (the
1236 appropriate bit in all the other drivers is clear) one will be written to
1237 that driver register; if the client isn't free the bit will remain zero.
1238 if the appropriate bit is set (the driver request to gain control on a
1239 client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW
1240 interrupt will be asserted). write to address 0 will set a request to
1241 free all the clients that their appropriate bit (in the write command) is
1242 set. if the appropriate bit is clear (the driver request to free a client
1243 it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will
1245 #define MISC_REG_DRIVER_CONTROL_1 0xa510
1246 #define MISC_REG_DRIVER_CONTROL_7 0xa3c8
1247 /* [RW 1] e1hmf for WOL. If clr WOL signal o the PXP will be send on bit 0
1249 #define MISC_REG_E1HMF_MODE 0xa5f8
1250 /* [RW 32] Debug only: spare RW register reset by core reset */
1251 #define MISC_REG_GENERIC_CR_0 0xa460
1252 /* [RW 32] GPIO. [31-28] FLOAT port 0; [27-24] FLOAT port 0; When any of
1253 these bits is written as a '1'; the corresponding SPIO bit will turn off
1254 it's drivers and become an input. This is the reset state of all GPIO
1255 pins. The read value of these bits will be a '1' if that last command
1256 (#SET; #CLR; or #FLOAT) for this bit was a #FLOAT. (reset value 0xff).
1257 [23-20] CLR port 1; 19-16] CLR port 0; When any of these bits is written
1258 as a '1'; the corresponding GPIO bit will drive low. The read value of
1259 these bits will be a '1' if that last command (#SET; #CLR; or #FLOAT) for
1260 this bit was a #CLR. (reset value 0). [15-12] SET port 1; 11-8] port 0;
1261 SET When any of these bits is written as a '1'; the corresponding GPIO
1262 bit will drive high (if it has that capability). The read value of these
1263 bits will be a '1' if that last command (#SET; #CLR; or #FLOAT) for this
1264 bit was a #SET. (reset value 0). [7-4] VALUE port 1; [3-0] VALUE port 0;
1265 RO; These bits indicate the read value of each of the eight GPIO pins.
1266 This is the result value of the pin; not the drive value. Writing these
1267 bits will have not effect. */
1268 #define MISC_REG_GPIO 0xa490
1269 /* [RW 8] These bits enable the GPIO_INTs to signals event to the
1270 IGU/MCP.according to the following map: [0] p0_gpio_0; [1] p0_gpio_1; [2]
1271 p0_gpio_2; [3] p0_gpio_3; [4] p1_gpio_0; [5] p1_gpio_1; [6] p1_gpio_2;
1273 #define MISC_REG_GPIO_EVENT_EN 0xa2bc
1274 /* [RW 32] GPIO INT. [31-28] OLD_CLR port1; [27-24] OLD_CLR port0; Writing a
1275 '1' to these bit clears the corresponding bit in the #OLD_VALUE register.
1276 This will acknowledge an interrupt on the falling edge of corresponding
1277 GPIO input (reset value 0). [23-16] OLD_SET [23-16] port1; OLD_SET port0;
1278 Writing a '1' to these bit sets the corresponding bit in the #OLD_VALUE
1279 register. This will acknowledge an interrupt on the rising edge of
1280 corresponding SPIO input (reset value 0). [15-12] OLD_VALUE [11-8] port1;
1281 OLD_VALUE port0; RO; These bits indicate the old value of the GPIO input
1282 value. When the ~INT_STATE bit is set; this bit indicates the OLD value
1283 of the pin such that if ~INT_STATE is set and this bit is '0'; then the
1284 interrupt is due to a low to high edge. If ~INT_STATE is set and this bit
1285 is '1'; then the interrupt is due to a high to low edge (reset value 0).
1286 [7-4] INT_STATE port1; [3-0] INT_STATE RO port0; These bits indicate the
1287 current GPIO interrupt state for each GPIO pin. This bit is cleared when
1288 the appropriate #OLD_SET or #OLD_CLR command bit is written. This bit is
1289 set when the GPIO input does not match the current value in #OLD_VALUE
1291 #define MISC_REG_GPIO_INT 0xa494
1292 /* [R 28] this field hold the last information that caused reserved
1293 attention. bits [19:0] - address; [22:20] function; [23] reserved;
1294 [27:24] the master that caused the attention - according to the following
1295 encodeing:1 = pxp; 2 = mcp; 3 = usdm; 4 = tsdm; 5 = xsdm; 6 = csdm; 7 =
1297 #define MISC_REG_GRC_RSV_ATTN 0xa3c0
1298 /* [R 28] this field hold the last information that caused timeout
1299 attention. bits [19:0] - address; [22:20] function; [23] reserved;
1300 [27:24] the master that caused the attention - according to the following
1301 encodeing:1 = pxp; 2 = mcp; 3 = usdm; 4 = tsdm; 5 = xsdm; 6 = csdm; 7 =
1303 #define MISC_REG_GRC_TIMEOUT_ATTN 0xa3c4
1304 /* [RW 1] Setting this bit enables a timer in the GRC block to timeout any
1305 access that does not finish within
1306 ~misc_registers_grc_timout_val.grc_timeout_val cycles. When this bit is
1307 cleared; this timeout is disabled. If this timeout occurs; the GRC shall
1308 assert it attention output. */
1309 #define MISC_REG_GRC_TIMEOUT_EN 0xa280
1310 /* [RW 28] 28 LSB of LCPLL first register; reset val = 521. inside order of
1311 the bits is: [2:0] OAC reset value 001) CML output buffer bias control;
1312 111 for +40%; 011 for +20%; 001 for 0%; 000 for -20%. [5:3] Icp_ctrl
1313 (reset value 001) Charge pump current control; 111 for 720u; 011 for
1314 600u; 001 for 480u and 000 for 360u. [7:6] Bias_ctrl (reset value 00)
1315 Global bias control; When bit 7 is high bias current will be 10 0gh; When
1316 bit 6 is high bias will be 100w; Valid values are 00; 10; 01. [10:8]
1317 Pll_observe (reset value 010) Bits to control observability. bit 10 is
1318 for test bias; bit 9 is for test CK; bit 8 is test Vc. [12:11] Vth_ctrl
1319 (reset value 00) Comparator threshold control. 00 for 0.6V; 01 for 0.54V
1320 and 10 for 0.66V. [13] pllSeqStart (reset value 0) Enables VCO tuning
1321 sequencer: 1= sequencer disabled; 0= sequencer enabled (inverted
1322 internally). [14] reserved (reset value 0) Reset for VCO sequencer is
1323 connected to RESET input directly. [15] capRetry_en (reset value 0)
1324 enable retry on cap search failure (inverted). [16] freqMonitor_e (reset
1325 value 0) bit to continuously monitor vco freq (inverted). [17]
1326 freqDetRestart_en (reset value 0) bit to enable restart when not freq
1327 locked (inverted). [18] freqDetRetry_en (reset value 0) bit to enable
1328 retry on freq det failure(inverted). [19] pllForceFdone_en (reset value
1329 0) bit to enable pllForceFdone & pllForceFpass into pllSeq. [20]
1330 pllForceFdone (reset value 0) bit to force freqDone. [21] pllForceFpass
1331 (reset value 0) bit to force freqPass. [22] pllForceDone_en (reset value
1332 0) bit to enable pllForceCapDone. [23] pllForceCapDone (reset value 0)
1333 bit to force capDone. [24] pllForceCapPass_en (reset value 0) bit to
1334 enable pllForceCapPass. [25] pllForceCapPass (reset value 0) bit to force
1335 capPass. [26] capRestart (reset value 0) bit to force cap sequencer to
1336 restart. [27] capSelectM_en (reset value 0) bit to enable cap select
1338 #define MISC_REG_LCPLL_CTRL_1 0xa2a4
1339 #define MISC_REG_LCPLL_CTRL_REG_2 0xa2a8
1340 /* [RW 4] Interrupt mask register #0 read/write */
1341 #define MISC_REG_MISC_INT_MASK 0xa388
1342 /* [RW 1] Parity mask register #0 read/write */
1343 #define MISC_REG_MISC_PRTY_MASK 0xa398
1344 /* [R 1] Parity register #0 read */
1345 #define MISC_REG_MISC_PRTY_STS 0xa38c
1346 #define MISC_REG_NIG_WOL_P0 0xa270
1347 #define MISC_REG_NIG_WOL_P1 0xa274
1348 /* [R 1] If set indicate that the pcie_rst_b was asserted without perst
1350 #define MISC_REG_PCIE_HOT_RESET 0xa618
1351 /* [RW 32] 32 LSB of storm PLL first register; reset val = 0x 071d2911.
1352 inside order of the bits is: [0] P1 divider[0] (reset value 1); [1] P1
1353 divider[1] (reset value 0); [2] P1 divider[2] (reset value 0); [3] P1
1354 divider[3] (reset value 0); [4] P2 divider[0] (reset value 1); [5] P2
1355 divider[1] (reset value 0); [6] P2 divider[2] (reset value 0); [7] P2
1356 divider[3] (reset value 0); [8] ph_det_dis (reset value 1); [9]
1357 freq_det_dis (reset value 0); [10] Icpx[0] (reset value 0); [11] Icpx[1]
1358 (reset value 1); [12] Icpx[2] (reset value 0); [13] Icpx[3] (reset value
1359 1); [14] Icpx[4] (reset value 0); [15] Icpx[5] (reset value 0); [16]
1360 Rx[0] (reset value 1); [17] Rx[1] (reset value 0); [18] vc_en (reset
1361 value 1); [19] vco_rng[0] (reset value 1); [20] vco_rng[1] (reset value
1362 1); [21] Kvco_xf[0] (reset value 0); [22] Kvco_xf[1] (reset value 0);
1363 [23] Kvco_xf[2] (reset value 0); [24] Kvco_xs[0] (reset value 1); [25]
1364 Kvco_xs[1] (reset value 1); [26] Kvco_xs[2] (reset value 1); [27]
1365 testd_en (reset value 0); [28] testd_sel[0] (reset value 0); [29]
1366 testd_sel[1] (reset value 0); [30] testd_sel[2] (reset value 0); [31]
1367 testa_en (reset value 0); */
1368 #define MISC_REG_PLL_STORM_CTRL_1 0xa294
1369 #define MISC_REG_PLL_STORM_CTRL_2 0xa298
1370 #define MISC_REG_PLL_STORM_CTRL_3 0xa29c
1371 #define MISC_REG_PLL_STORM_CTRL_4 0xa2a0
1372 /* [RW 32] reset reg#2; rite/read one = the specific block is out of reset;
1373 write/read zero = the specific block is in reset; addr 0-wr- the write
1374 value will be written to the register; addr 1-set - one will be written
1375 to all the bits that have the value of one in the data written (bits that
1376 have the value of zero will not be change) ; addr 2-clear - zero will be
1377 written to all the bits that have the value of one in the data written
1378 (bits that have the value of zero will not be change); addr 3-ignore;
1379 read ignore from all addr except addr 00; inside order of the bits is:
1380 [0] rst_bmac0; [1] rst_bmac1; [2] rst_emac0; [3] rst_emac1; [4] rst_grc;
1381 [5] rst_mcp_n_reset_reg_hard_core; [6] rst_ mcp_n_hard_core_rst_b; [7]
1382 rst_ mcp_n_reset_cmn_cpu; [8] rst_ mcp_n_reset_cmn_core; [9] rst_rbcn;
1383 [10] rst_dbg; [11] rst_misc_core; [12] rst_dbue (UART); [13]
1384 Pci_resetmdio_n; [14] rst_emac0_hard_core; [15] rst_emac1_hard_core; 16]
1385 rst_pxp_rq_rd_wr; 31:17] reserved */
1386 #define MISC_REG_RESET_REG_2 0xa590
1387 /* [RW 20] 20 bit GRC address where the scratch-pad of the MCP that is
1388 shared with the driver resides */
1389 #define MISC_REG_SHARED_MEM_ADDR 0xa2b4
1390 /* [RW 32] SPIO. [31-24] FLOAT When any of these bits is written as a '1';
1391 the corresponding SPIO bit will turn off it's drivers and become an
1392 input. This is the reset state of all SPIO pins. The read value of these
1393 bits will be a '1' if that last command (#SET; #CL; or #FLOAT) for this
1394 bit was a #FLOAT. (reset value 0xff). [23-16] CLR When any of these bits
1395 is written as a '1'; the corresponding SPIO bit will drive low. The read
1396 value of these bits will be a '1' if that last command (#SET; #CLR; or
1397 #FLOAT) for this bit was a #CLR. (reset value 0). [15-8] SET When any of
1398 these bits is written as a '1'; the corresponding SPIO bit will drive
1399 high (if it has that capability). The read value of these bits will be a
1400 '1' if that last command (#SET; #CLR; or #FLOAT) for this bit was a #SET.
1401 (reset value 0). [7-0] VALUE RO; These bits indicate the read value of
1402 each of the eight SPIO pins. This is the result value of the pin; not the
1403 drive value. Writing these bits will have not effect. Each 8 bits field
1404 is divided as follows: [0] VAUX Enable; when pulsed low; enables supply
1405 from VAUX. (This is an output pin only; the FLOAT field is not applicable
1406 for this pin); [1] VAUX Disable; when pulsed low; disables supply form
1407 VAUX. (This is an output pin only; FLOAT field is not applicable for this
1408 pin); [2] SEL_VAUX_B - Control to power switching logic. Drive low to
1409 select VAUX supply. (This is an output pin only; it is not controlled by
1410 the SET and CLR fields; it is controlled by the Main Power SM; the FLOAT
1411 field is not applicable for this pin; only the VALUE fields is relevant -
1412 it reflects the output value); [3] port swap [4] spio_4; [5] spio_5; [6]
1413 Bit 0 of UMP device ID select; read by UMP firmware; [7] Bit 1 of UMP
1414 device ID select; read by UMP firmware. */
1415 #define MISC_REG_SPIO 0xa4fc
1416 /* [RW 8] These bits enable the SPIO_INTs to signals event to the IGU/MC.
1417 according to the following map: [3:0] reserved; [4] spio_4 [5] spio_5;
1419 #define MISC_REG_SPIO_EVENT_EN 0xa2b8
1420 /* [RW 32] SPIO INT. [31-24] OLD_CLR Writing a '1' to these bit clears the
1421 corresponding bit in the #OLD_VALUE register. This will acknowledge an
1422 interrupt on the falling edge of corresponding SPIO input (reset value
1423 0). [23-16] OLD_SET Writing a '1' to these bit sets the corresponding bit
1424 in the #OLD_VALUE register. This will acknowledge an interrupt on the
1425 rising edge of corresponding SPIO input (reset value 0). [15-8] OLD_VALUE
1426 RO; These bits indicate the old value of the SPIO input value. When the
1427 ~INT_STATE bit is set; this bit indicates the OLD value of the pin such
1428 that if ~INT_STATE is set and this bit is '0'; then the interrupt is due
1429 to a low to high edge. If ~INT_STATE is set and this bit is '1'; then the
1430 interrupt is due to a high to low edge (reset value 0). [7-0] INT_STATE
1431 RO; These bits indicate the current SPIO interrupt state for each SPIO
1432 pin. This bit is cleared when the appropriate #OLD_SET or #OLD_CLR
1433 command bit is written. This bit is set when the SPIO input does not
1434 match the current value in #OLD_VALUE (reset value 0). */
1435 #define MISC_REG_SPIO_INT 0xa500
1436 /* [RW 32] reload value for counter 4 if reload; the value will be reload if
1437 the counter reached zero and the reload bit
1438 (~misc_registers_sw_timer_cfg_4.sw_timer_cfg_4[1] ) is set */
1439 #define MISC_REG_SW_TIMER_RELOAD_VAL_4 0xa2fc
1440 /* [RW 32] the value of the counter for sw timers1-8. there are 8 addresses
1441 in this register. addres 0 - timer 1; address - timer 2�address 7 -
1443 #define MISC_REG_SW_TIMER_VAL 0xa5c0
1444 /* [RW 1] Set by the MCP to remember if one or more of the drivers is/are
1445 loaded; 0-prepare; -unprepare */
1446 #define MISC_REG_UNPREPARED 0xa424
1447 #define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_BRCST (0x1<<0)
1448 #define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_MLCST (0x1<<1)
1449 #define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_NO_VLAN (0x1<<4)
1450 #define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_UNCST (0x1<<2)
1451 #define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_VLAN (0x1<<3)
1452 #define NIG_MASK_INTERRUPT_PORT0_REG_MASK_EMAC0_MISC_MI_INT (0x1<<0)
1453 #define NIG_MASK_INTERRUPT_PORT0_REG_MASK_SERDES0_LINK_STATUS (0x1<<9)
1454 #define NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK10G (0x1<<15)
1455 #define NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK_STATUS (0xf<<18)
1456 /* [RW 1] Input enable for RX_BMAC0 IF */
1457 #define NIG_REG_BMAC0_IN_EN 0x100ac
1458 /* [RW 1] output enable for TX_BMAC0 IF */
1459 #define NIG_REG_BMAC0_OUT_EN 0x100e0
1460 /* [RW 1] output enable for TX BMAC pause port 0 IF */
1461 #define NIG_REG_BMAC0_PAUSE_OUT_EN 0x10110
1462 /* [RW 1] output enable for RX_BMAC0_REGS IF */
1463 #define NIG_REG_BMAC0_REGS_OUT_EN 0x100e8
1464 /* [RW 1] output enable for RX BRB1 port0 IF */
1465 #define NIG_REG_BRB0_OUT_EN 0x100f8
1466 /* [RW 1] Input enable for TX BRB1 pause port 0 IF */
1467 #define NIG_REG_BRB0_PAUSE_IN_EN 0x100c4
1468 /* [RW 1] output enable for RX BRB1 port1 IF */
1469 #define NIG_REG_BRB1_OUT_EN 0x100fc
1470 /* [RW 1] Input enable for TX BRB1 pause port 1 IF */
1471 #define NIG_REG_BRB1_PAUSE_IN_EN 0x100c8
1472 /* [RW 1] output enable for RX BRB1 LP IF */
1473 #define NIG_REG_BRB_LB_OUT_EN 0x10100
1474 /* [WB_W 82] Debug packet to LP from RBC; Data spelling:[63:0] data; 64]
1475 error; [67:65]eop_bvalid; [68]eop; [69]sop; [70]port_id; 71]flush;
1476 72:73]-vnic_num; 81:74]-sideband_info */
1477 #define NIG_REG_DEBUG_PACKET_LB 0x10800
1478 /* [RW 1] Input enable for TX Debug packet */
1479 #define NIG_REG_EGRESS_DEBUG_IN_EN 0x100dc
1480 /* [RW 1] If 1 - egress drain mode for port0 is active. In this mode all
1481 packets from PBFare not forwarded to the MAC and just deleted from FIFO.
1482 First packet may be deleted from the middle. And last packet will be
1483 always deleted till the end. */
1484 #define NIG_REG_EGRESS_DRAIN0_MODE 0x10060
1485 /* [RW 1] Output enable to EMAC0 */
1486 #define NIG_REG_EGRESS_EMAC0_OUT_EN 0x10120
1487 /* [RW 1] MAC configuration for packets of port0. If 1 - all packet outputs
1488 to emac for port0; other way to bmac for port0 */
1489 #define NIG_REG_EGRESS_EMAC0_PORT 0x10058
1490 /* [RW 1] Input enable for TX PBF user packet port0 IF */
1491 #define NIG_REG_EGRESS_PBF0_IN_EN 0x100cc
1492 /* [RW 1] Input enable for TX PBF user packet port1 IF */
1493 #define NIG_REG_EGRESS_PBF1_IN_EN 0x100d0
1494 /* [RW 1] Input enable for TX UMP management packet port0 IF */
1495 #define NIG_REG_EGRESS_UMP0_IN_EN 0x100d4
1496 /* [RW 1] Input enable for RX_EMAC0 IF */
1497 #define NIG_REG_EMAC0_IN_EN 0x100a4
1498 /* [RW 1] output enable for TX EMAC pause port 0 IF */
1499 #define NIG_REG_EMAC0_PAUSE_OUT_EN 0x10118
1500 /* [R 1] status from emac0. This bit is set when MDINT from either the
1501 EXT_MDINT pin or from the Copper PHY is driven low. This condition must
1502 be cleared in the attached PHY device that is driving the MINT pin. */
1503 #define NIG_REG_EMAC0_STATUS_MISC_MI_INT 0x10494
1504 /* [WB 48] This address space contains BMAC0 registers. The BMAC registers
1505 are described in appendix A. In order to access the BMAC0 registers; the
1506 base address; NIG_REGISTERS_INGRESS_BMAC0_MEM; Offset: 0x10c00; should be
1507 added to each BMAC register offset */
1508 #define NIG_REG_INGRESS_BMAC0_MEM 0x10c00
1509 /* [WB 48] This address space contains BMAC1 registers. The BMAC registers
1510 are described in appendix A. In order to access the BMAC0 registers; the
1511 base address; NIG_REGISTERS_INGRESS_BMAC1_MEM; Offset: 0x11000; should be
1512 added to each BMAC register offset */
1513 #define NIG_REG_INGRESS_BMAC1_MEM 0x11000
1514 /* [R 1] FIFO empty in EOP descriptor FIFO of LP in NIG_RX_EOP */
1515 #define NIG_REG_INGRESS_EOP_LB_EMPTY 0x104e0
1516 /* [RW 17] Debug only. RX_EOP_DSCR_lb_FIFO in NIG_RX_EOP. Data
1517 packet_length[13:0]; mac_error[14]; trunc_error[15]; parity[16] */
1518 #define NIG_REG_INGRESS_EOP_LB_FIFO 0x104e4
1519 /* [RW 27] 0 - must be active for Everest A0; 1- for Everest B0 when latch
1520 logic for interrupts must be used. Enable per bit of interrupt of
1521 ~latch_status.latch_status */
1522 #define NIG_REG_LATCH_BC_0 0x16210
1523 /* [RW 27] Latch for each interrupt from Unicore.b[0]
1524 status_emac0_misc_mi_int; b[1] status_emac0_misc_mi_complete;
1525 b[2]status_emac0_misc_cfg_change; b[3]status_emac0_misc_link_status;
1526 b[4]status_emac0_misc_link_change; b[5]status_emac0_misc_attn;
1527 b[6]status_serdes0_mac_crs; b[7]status_serdes0_autoneg_complete;
1528 b[8]status_serdes0_fiber_rxact; b[9]status_serdes0_link_status;
1529 b[10]status_serdes0_mr_page_rx; b[11]status_serdes0_cl73_an_complete;
1530 b[12]status_serdes0_cl73_mr_page_rx; b[13]status_serdes0_rx_sigdet;
1531 b[14]status_xgxs0_remotemdioreq; b[15]status_xgxs0_link10g;
1532 b[16]status_xgxs0_autoneg_complete; b[17]status_xgxs0_fiber_rxact;
1533 b[21:18]status_xgxs0_link_status; b[22]status_xgxs0_mr_page_rx;
1534 b[23]status_xgxs0_cl73_an_complete; b[24]status_xgxs0_cl73_mr_page_rx;
1535 b[25]status_xgxs0_rx_sigdet; b[26]status_xgxs0_mac_crs */
1536 #define NIG_REG_LATCH_STATUS_0 0x18000
1537 /* [RW 1] led 10g for port 0 */
1538 #define NIG_REG_LED_10G_P0 0x10320
1539 /* [RW 1] led 10g for port 1 */
1540 #define NIG_REG_LED_10G_P1 0x10324
1541 /* [RW 1] Port0: This bit is set to enable the use of the
1542 ~nig_registers_led_control_blink_rate_p0.led_control_blink_rate_p0 field
1543 defined below. If this bit is cleared; then the blink rate will be about
1545 #define NIG_REG_LED_CONTROL_BLINK_RATE_ENA_P0 0x10318
1546 /* [RW 12] Port0: Specifies the period of each blink cycle (on + off) for
1547 Traffic LED in milliseconds. Must be a non-zero value. This 12-bit field
1548 is reset to 0x080; giving a default blink period of approximately 8Hz. */
1549 #define NIG_REG_LED_CONTROL_BLINK_RATE_P0 0x10310
1550 /* [RW 1] Port0: If set along with the
1551 ~nig_registers_led_control_override_traffic_p0.led_control_override_traffic_p0
1552 bit and ~nig_registers_led_control_traffic_p0.led_control_traffic_p0 LED
1553 bit; the Traffic LED will blink with the blink rate specified in
1554 ~nig_registers_led_control_blink_rate_p0.led_control_blink_rate_p0 and
1555 ~nig_registers_led_control_blink_rate_ena_p0.led_control_blink_rate_ena_p0
1557 #define NIG_REG_LED_CONTROL_BLINK_TRAFFIC_P0 0x10308
1558 /* [RW 1] Port0: If set overrides hardware control of the Traffic LED. The
1559 Traffic LED will then be controlled via bit ~nig_registers_
1560 led_control_traffic_p0.led_control_traffic_p0 and bit
1561 ~nig_registers_led_control_blink_traffic_p0.led_control_blink_traffic_p0 */
1562 #define NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0 0x102f8
1563 /* [RW 1] Port0: If set along with the led_control_override_trafic_p0 bit;
1564 turns on the Traffic LED. If the led_control_blink_traffic_p0 bit is also
1565 set; the LED will blink with blink rate specified in
1566 ~nig_registers_led_control_blink_rate_p0.led_control_blink_rate_p0 and
1567 ~nig_regsters_led_control_blink_rate_ena_p0.led_control_blink_rate_ena_p0
1569 #define NIG_REG_LED_CONTROL_TRAFFIC_P0 0x10300
1570 /* [RW 4] led mode for port0: 0 MAC; 1-3 PHY1; 4 MAC2; 5-7 PHY4; 8-MAC3;
1571 9-11PHY7; 12 MAC4; 13-15 PHY10; */
1572 #define NIG_REG_LED_MODE_P0 0x102f0
1573 /* [RW 3] for port0 enable for llfc ppp and pause. b0 - brb1 enable; b1-
1574 tsdm enable; b2- usdm enable */
1575 #define NIG_REG_LLFC_EGRESS_SRC_ENABLE_0 0x16070
1576 #define NIG_REG_LLFC_EGRESS_SRC_ENABLE_1 0x16074
1577 /* [RW 1] SAFC enable for port0. This register may get 1 only when
1578 ~ppp_enable.ppp_enable = 0 and pause_enable.pause_enable =0 for the same
1580 #define NIG_REG_LLFC_ENABLE_0 0x16208
1581 /* [RW 16] classes are high-priority for port0 */
1582 #define NIG_REG_LLFC_HIGH_PRIORITY_CLASSES_0 0x16058
1583 /* [RW 16] classes are low-priority for port0 */
1584 #define NIG_REG_LLFC_LOW_PRIORITY_CLASSES_0 0x16060
1585 /* [RW 1] Output enable of message to LLFC BMAC IF for port0 */
1586 #define NIG_REG_LLFC_OUT_EN_0 0x160c8
1587 #define NIG_REG_LLH0_ACPI_PAT_0_CRC 0x1015c
1588 #define NIG_REG_LLH0_ACPI_PAT_6_LEN 0x10154
1589 #define NIG_REG_LLH0_BRB1_DRV_MASK 0x10244
1590 #define NIG_REG_LLH0_BRB1_DRV_MASK_MF 0x16048
1591 /* [RW 1] send to BRB1 if no match on any of RMP rules. */
1592 #define NIG_REG_LLH0_BRB1_NOT_MCP 0x1025c
1593 /* [RW 2] Determine the classification participants. 0: no classification.1:
1594 classification upon VLAN id. 2: classification upon MAC address. 3:
1595 classification upon both VLAN id & MAC addr. */
1596 #define NIG_REG_LLH0_CLS_TYPE 0x16080
1597 /* [RW 32] cm header for llh0 */
1598 #define NIG_REG_LLH0_CM_HEADER 0x1007c
1599 #define NIG_REG_LLH0_DEST_IP_0_1 0x101dc
1600 #define NIG_REG_LLH0_DEST_MAC_0_0 0x101c0
1601 /* [RW 16] destination TCP address 1. The LLH will look for this address in
1602 all incoming packets. */
1603 #define NIG_REG_LLH0_DEST_TCP_0 0x10220
1604 /* [RW 16] destination UDP address 1 The LLH will look for this address in
1605 all incoming packets. */
1606 #define NIG_REG_LLH0_DEST_UDP_0 0x10214
1607 #define NIG_REG_LLH0_ERROR_MASK 0x1008c
1608 /* [RW 8] event id for llh0 */
1609 #define NIG_REG_LLH0_EVENT_ID 0x10084
1610 #define NIG_REG_LLH0_FUNC_EN 0x160fc
1611 #define NIG_REG_LLH0_FUNC_VLAN_ID 0x16100
1612 /* [RW 1] Determine the IP version to look for in
1613 ~nig_registers_llh0_dest_ip_0.llh0_dest_ip_0. 0 - IPv6; 1-IPv4 */
1614 #define NIG_REG_LLH0_IPV4_IPV6_0 0x10208
1615 /* [RW 1] t bit for llh0 */
1616 #define NIG_REG_LLH0_T_BIT 0x10074
1617 /* [RW 12] VLAN ID 1. In case of VLAN packet the LLH will look for this ID. */
1618 #define NIG_REG_LLH0_VLAN_ID_0 0x1022c
1619 /* [RW 8] init credit counter for port0 in LLH */
1620 #define NIG_REG_LLH0_XCM_INIT_CREDIT 0x10554
1621 #define NIG_REG_LLH0_XCM_MASK 0x10130
1622 #define NIG_REG_LLH1_BRB1_DRV_MASK 0x10248
1623 /* [RW 1] send to BRB1 if no match on any of RMP rules. */
1624 #define NIG_REG_LLH1_BRB1_NOT_MCP 0x102dc
1625 /* [RW 2] Determine the classification participants. 0: no classification.1:
1626 classification upon VLAN id. 2: classification upon MAC address. 3:
1627 classification upon both VLAN id & MAC addr. */
1628 #define NIG_REG_LLH1_CLS_TYPE 0x16084
1629 /* [RW 32] cm header for llh1 */
1630 #define NIG_REG_LLH1_CM_HEADER 0x10080
1631 #define NIG_REG_LLH1_ERROR_MASK 0x10090
1632 /* [RW 8] event id for llh1 */
1633 #define NIG_REG_LLH1_EVENT_ID 0x10088
1634 /* [RW 8] init credit counter for port1 in LLH */
1635 #define NIG_REG_LLH1_XCM_INIT_CREDIT 0x10564
1636 #define NIG_REG_LLH1_XCM_MASK 0x10134
1637 /* [RW 1] When this bit is set; the LLH will expect all packets to be with
1639 #define NIG_REG_LLH_E1HOV_MODE 0x160d8
1640 /* [RW 1] When this bit is set; the LLH will classify the packet before
1641 sending it to the BRB or calculating WoL on it. */
1642 #define NIG_REG_LLH_MF_MODE 0x16024
1643 #define NIG_REG_MASK_INTERRUPT_PORT0 0x10330
1644 #define NIG_REG_MASK_INTERRUPT_PORT1 0x10334
1645 /* [RW 1] Output signal from NIG to EMAC0. When set enables the EMAC0 block. */
1646 #define NIG_REG_NIG_EMAC0_EN 0x1003c
1647 /* [RW 1] Output signal from NIG to EMAC1. When set enables the EMAC1 block. */
1648 #define NIG_REG_NIG_EMAC1_EN 0x10040
1649 /* [RW 1] Output signal from NIG to TX_EMAC0. When set indicates to the
1650 EMAC0 to strip the CRC from the ingress packets. */
1651 #define NIG_REG_NIG_INGRESS_EMAC0_NO_CRC 0x10044
1652 /* [R 32] Interrupt register #0 read */
1653 #define NIG_REG_NIG_INT_STS_0 0x103b0
1654 #define NIG_REG_NIG_INT_STS_1 0x103c0
1655 /* [R 32] Parity register #0 read */
1656 #define NIG_REG_NIG_PRTY_STS 0x103d0
1657 /* [RW 1] Pause enable for port0. This register may get 1 only when
1658 ~safc_enable.safc_enable = 0 and ppp_enable.ppp_enable =0 for the same
1660 #define NIG_REG_PAUSE_ENABLE_0 0x160c0
1661 /* [RW 1] Input enable for RX PBF LP IF */
1662 #define NIG_REG_PBF_LB_IN_EN 0x100b4
1663 /* [RW 1] Value of this register will be transmitted to port swap when
1664 ~nig_registers_strap_override.strap_override =1 */
1665 #define NIG_REG_PORT_SWAP 0x10394
1666 /* [RW 1] output enable for RX parser descriptor IF */
1667 #define NIG_REG_PRS_EOP_OUT_EN 0x10104
1668 /* [RW 1] Input enable for RX parser request IF */
1669 #define NIG_REG_PRS_REQ_IN_EN 0x100b8
1670 /* [RW 5] control to serdes - CL45 DEVAD */
1671 #define NIG_REG_SERDES0_CTRL_MD_DEVAD 0x10370
1672 /* [RW 1] control to serdes; 0 - clause 45; 1 - clause 22 */
1673 #define NIG_REG_SERDES0_CTRL_MD_ST 0x1036c
1674 /* [RW 5] control to serdes - CL22 PHY_ADD and CL45 PRTAD */
1675 #define NIG_REG_SERDES0_CTRL_PHY_ADDR 0x10374
1676 /* [R 1] status from serdes0 that inputs to interrupt logic of link status */
1677 #define NIG_REG_SERDES0_STATUS_LINK_STATUS 0x10578
1678 /* [R 32] Rx statistics : In user packets discarded due to BRB backpressure
1680 #define NIG_REG_STAT0_BRB_DISCARD 0x105f0
1681 /* [R 32] Rx statistics : In user packets truncated due to BRB backpressure
1683 #define NIG_REG_STAT0_BRB_TRUNCATE 0x105f8
1684 /* [WB_R 36] Tx statistics : Number of packets from emac0 or bmac0 that
1685 between 1024 and 1522 bytes for port0 */
1686 #define NIG_REG_STAT0_EGRESS_MAC_PKT0 0x10750
1687 /* [WB_R 36] Tx statistics : Number of packets from emac0 or bmac0 that
1688 between 1523 bytes and above for port0 */
1689 #define NIG_REG_STAT0_EGRESS_MAC_PKT1 0x10760
1690 /* [R 32] Rx statistics : In user packets discarded due to BRB backpressure
1692 #define NIG_REG_STAT1_BRB_DISCARD 0x10628
1693 /* [WB_R 36] Tx statistics : Number of packets from emac1 or bmac1 that
1694 between 1024 and 1522 bytes for port1 */
1695 #define NIG_REG_STAT1_EGRESS_MAC_PKT0 0x107a0
1696 /* [WB_R 36] Tx statistics : Number of packets from emac1 or bmac1 that
1697 between 1523 bytes and above for port1 */
1698 #define NIG_REG_STAT1_EGRESS_MAC_PKT1 0x107b0
1699 /* [WB_R 64] Rx statistics : User octets received for LP */
1700 #define NIG_REG_STAT2_BRB_OCTET 0x107e0
1701 #define NIG_REG_STATUS_INTERRUPT_PORT0 0x10328
1702 #define NIG_REG_STATUS_INTERRUPT_PORT1 0x1032c
1703 /* [RW 1] port swap mux selection. If this register equal to 0 then port
1704 swap is equal to SPIO pin that inputs from ifmux_serdes_swap. If 1 then
1705 ort swap is equal to ~nig_registers_port_swap.port_swap */
1706 #define NIG_REG_STRAP_OVERRIDE 0x10398
1707 /* [RW 1] output enable for RX_XCM0 IF */
1708 #define NIG_REG_XCM0_OUT_EN 0x100f0
1709 /* [RW 1] output enable for RX_XCM1 IF */
1710 #define NIG_REG_XCM1_OUT_EN 0x100f4
1711 /* [RW 1] control to xgxs - remote PHY in-band MDIO */
1712 #define NIG_REG_XGXS0_CTRL_EXTREMOTEMDIOST 0x10348
1713 /* [RW 5] control to xgxs - CL45 DEVAD */
1714 #define NIG_REG_XGXS0_CTRL_MD_DEVAD 0x1033c
1715 /* [RW 1] control to xgxs; 0 - clause 45; 1 - clause 22 */
1716 #define NIG_REG_XGXS0_CTRL_MD_ST 0x10338
1717 /* [RW 5] control to xgxs - CL22 PHY_ADD and CL45 PRTAD */
1718 #define NIG_REG_XGXS0_CTRL_PHY_ADDR 0x10340
1719 /* [R 1] status from xgxs0 that inputs to interrupt logic of link10g. */
1720 #define NIG_REG_XGXS0_STATUS_LINK10G 0x10680
1721 /* [R 4] status from xgxs0 that inputs to interrupt logic of link status */
1722 #define NIG_REG_XGXS0_STATUS_LINK_STATUS 0x10684
1723 /* [RW 2] selection for XGXS lane of port 0 in NIG_MUX block */
1724 #define NIG_REG_XGXS_LANE_SEL_P0 0x102e8
1725 /* [RW 1] selection for port0 for NIG_MUX block : 0 = SerDes; 1 = XGXS */
1726 #define NIG_REG_XGXS_SERDES0_MODE_SEL 0x102e0
1727 #define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_EMAC0_MISC_MI_INT (0x1<<0)
1728 #define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_SERDES0_LINK_STATUS (0x1<<9)
1729 #define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK10G (0x1<<15)
1730 #define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS (0xf<<18)
1731 #define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS_SIZE 18
1732 /* [RW 1] Disable processing further tasks from port 0 (after ending the
1733 current task in process). */
1734 #define PBF_REG_DISABLE_NEW_TASK_PROC_P0 0x14005c
1735 /* [RW 1] Disable processing further tasks from port 1 (after ending the
1736 current task in process). */
1737 #define PBF_REG_DISABLE_NEW_TASK_PROC_P1 0x140060
1738 /* [RW 1] Disable processing further tasks from port 4 (after ending the
1739 current task in process). */
1740 #define PBF_REG_DISABLE_NEW_TASK_PROC_P4 0x14006c
1741 #define PBF_REG_IF_ENABLE_REG 0x140044
1742 /* [RW 1] Init bit. When set the initial credits are copied to the credit
1743 registers (except the port credits). Should be set and then reset after
1744 the configuration of the block has ended. */
1745 #define PBF_REG_INIT 0x140000
1746 /* [RW 1] Init bit for port 0. When set the initial credit of port 0 is
1747 copied to the credit register. Should be set and then reset after the
1748 configuration of the port has ended. */
1749 #define PBF_REG_INIT_P0 0x140004
1750 /* [RW 1] Init bit for port 1. When set the initial credit of port 1 is
1751 copied to the credit register. Should be set and then reset after the
1752 configuration of the port has ended. */
1753 #define PBF_REG_INIT_P1 0x140008
1754 /* [RW 1] Init bit for port 4. When set the initial credit of port 4 is
1755 copied to the credit register. Should be set and then reset after the
1756 configuration of the port has ended. */
1757 #define PBF_REG_INIT_P4 0x14000c
1758 /* [RW 1] Enable for mac interface 0. */
1759 #define PBF_REG_MAC_IF0_ENABLE 0x140030
1760 /* [RW 1] Enable for mac interface 1. */
1761 #define PBF_REG_MAC_IF1_ENABLE 0x140034
1762 /* [RW 1] Enable for the loopback interface. */
1763 #define PBF_REG_MAC_LB_ENABLE 0x140040
1764 /* [RW 10] Port 0 threshold used by arbiter in 16 byte lines used when pause
1766 #define PBF_REG_P0_ARB_THRSH 0x1400e4
1767 /* [R 11] Current credit for port 0 in the tx port buffers in 16 byte lines. */
1768 #define PBF_REG_P0_CREDIT 0x140200
1769 /* [RW 11] Initial credit for port 0 in the tx port buffers in 16 byte
1771 #define PBF_REG_P0_INIT_CRD 0x1400d0
1772 /* [RW 1] Indication that pause is enabled for port 0. */
1773 #define PBF_REG_P0_PAUSE_ENABLE 0x140014
1774 /* [R 8] Number of tasks in port 0 task queue. */
1775 #define PBF_REG_P0_TASK_CNT 0x140204
1776 /* [R 11] Current credit for port 1 in the tx port buffers in 16 byte lines. */
1777 #define PBF_REG_P1_CREDIT 0x140208
1778 /* [RW 11] Initial credit for port 1 in the tx port buffers in 16 byte
1780 #define PBF_REG_P1_INIT_CRD 0x1400d4
1781 /* [R 8] Number of tasks in port 1 task queue. */
1782 #define PBF_REG_P1_TASK_CNT 0x14020c
1783 /* [R 11] Current credit for port 4 in the tx port buffers in 16 byte lines. */
1784 #define PBF_REG_P4_CREDIT 0x140210
1785 /* [RW 11] Initial credit for port 4 in the tx port buffers in 16 byte
1787 #define PBF_REG_P4_INIT_CRD 0x1400e0
1788 /* [R 8] Number of tasks in port 4 task queue. */
1789 #define PBF_REG_P4_TASK_CNT 0x140214
1790 /* [RW 5] Interrupt mask register #0 read/write */
1791 #define PBF_REG_PBF_INT_MASK 0x1401d4
1792 /* [R 5] Interrupt register #0 read */
1793 #define PBF_REG_PBF_INT_STS 0x1401c8
1794 #define PB_REG_CONTROL 0
1795 /* [RW 2] Interrupt mask register #0 read/write */
1796 #define PB_REG_PB_INT_MASK 0x28
1797 /* [R 2] Interrupt register #0 read */
1798 #define PB_REG_PB_INT_STS 0x1c
1799 /* [RW 4] Parity mask register #0 read/write */
1800 #define PB_REG_PB_PRTY_MASK 0x38
1801 /* [R 4] Parity register #0 read */
1802 #define PB_REG_PB_PRTY_STS 0x2c
1803 #define PRS_REG_A_PRSU_20 0x40134
1804 /* [R 8] debug only: CFC load request current credit. Transaction based. */
1805 #define PRS_REG_CFC_LD_CURRENT_CREDIT 0x40164
1806 /* [R 8] debug only: CFC search request current credit. Transaction based. */
1807 #define PRS_REG_CFC_SEARCH_CURRENT_CREDIT 0x40168
1808 /* [RW 6] The initial credit for the search message to the CFC interface.
1809 Credit is transaction based. */
1810 #define PRS_REG_CFC_SEARCH_INITIAL_CREDIT 0x4011c
1811 /* [RW 24] CID for port 0 if no match */
1812 #define PRS_REG_CID_PORT_0 0x400fc
1813 /* [RW 32] The CM header for flush message where 'load existed' bit in CFC
1814 load response is reset and packet type is 0. Used in packet start message
1816 #define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_0 0x400dc
1817 #define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_1 0x400e0
1818 #define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_2 0x400e4
1819 #define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_3 0x400e8
1820 #define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_4 0x400ec
1821 #define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_5 0x400f0
1822 /* [RW 32] The CM header for flush message where 'load existed' bit in CFC
1823 load response is set and packet type is 0. Used in packet start message
1825 #define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_0 0x400bc
1826 #define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_1 0x400c0
1827 #define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_2 0x400c4
1828 #define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_3 0x400c8
1829 #define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_4 0x400cc
1830 #define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_5 0x400d0
1831 /* [RW 32] The CM header for a match and packet type 1 for loopback port.
1832 Used in packet start message to TCM. */
1833 #define PRS_REG_CM_HDR_LOOPBACK_TYPE_1 0x4009c
1834 #define PRS_REG_CM_HDR_LOOPBACK_TYPE_2 0x400a0
1835 #define PRS_REG_CM_HDR_LOOPBACK_TYPE_3 0x400a4
1836 #define PRS_REG_CM_HDR_LOOPBACK_TYPE_4 0x400a8
1837 /* [RW 32] The CM header for a match and packet type 0. Used in packet start
1839 #define PRS_REG_CM_HDR_TYPE_0 0x40078
1840 #define PRS_REG_CM_HDR_TYPE_1 0x4007c
1841 #define PRS_REG_CM_HDR_TYPE_2 0x40080
1842 #define PRS_REG_CM_HDR_TYPE_3 0x40084
1843 #define PRS_REG_CM_HDR_TYPE_4 0x40088
1844 /* [RW 32] The CM header in case there was not a match on the connection */
1845 #define PRS_REG_CM_NO_MATCH_HDR 0x400b8
1846 /* [RW 1] Indicates if in e1hov mode. 0=non-e1hov mode; 1=e1hov mode. */
1847 #define PRS_REG_E1HOV_MODE 0x401c8
1848 /* [RW 8] The 8-bit event ID for a match and packet type 1. Used in packet
1849 start message to TCM. */
1850 #define PRS_REG_EVENT_ID_1 0x40054
1851 #define PRS_REG_EVENT_ID_2 0x40058
1852 #define PRS_REG_EVENT_ID_3 0x4005c
1853 /* [RW 16] The Ethernet type value for FCoE */
1854 #define PRS_REG_FCOE_TYPE 0x401d0
1855 /* [RW 8] Context region for flush packet with packet type 0. Used in CFC
1856 load request message. */
1857 #define PRS_REG_FLUSH_REGIONS_TYPE_0 0x40004
1858 #define PRS_REG_FLUSH_REGIONS_TYPE_1 0x40008
1859 #define PRS_REG_FLUSH_REGIONS_TYPE_2 0x4000c
1860 #define PRS_REG_FLUSH_REGIONS_TYPE_3 0x40010
1861 #define PRS_REG_FLUSH_REGIONS_TYPE_4 0x40014
1862 #define PRS_REG_FLUSH_REGIONS_TYPE_5 0x40018
1863 #define PRS_REG_FLUSH_REGIONS_TYPE_6 0x4001c
1864 #define PRS_REG_FLUSH_REGIONS_TYPE_7 0x40020
1865 /* [RW 4] The increment value to send in the CFC load request message */
1866 #define PRS_REG_INC_VALUE 0x40048
1867 /* [RW 1] If set indicates not to send messages to CFC on received packets */
1868 #define PRS_REG_NIC_MODE 0x40138
1869 /* [RW 8] The 8-bit event ID for cases where there is no match on the
1870 connection. Used in packet start message to TCM. */
1871 #define PRS_REG_NO_MATCH_EVENT_ID 0x40070
1872 /* [ST 24] The number of input CFC flush packets */
1873 #define PRS_REG_NUM_OF_CFC_FLUSH_MESSAGES 0x40128
1874 /* [ST 32] The number of cycles the Parser halted its operation since it
1875 could not allocate the next serial number */
1876 #define PRS_REG_NUM_OF_DEAD_CYCLES 0x40130
1877 /* [ST 24] The number of input packets */
1878 #define PRS_REG_NUM_OF_PACKETS 0x40124
1879 /* [ST 24] The number of input transparent flush packets */
1880 #define PRS_REG_NUM_OF_TRANSPARENT_FLUSH_MESSAGES 0x4012c
1881 /* [RW 8] Context region for received Ethernet packet with a match and
1882 packet type 0. Used in CFC load request message */
1883 #define PRS_REG_PACKET_REGIONS_TYPE_0 0x40028
1884 #define PRS_REG_PACKET_REGIONS_TYPE_1 0x4002c
1885 #define PRS_REG_PACKET_REGIONS_TYPE_2 0x40030
1886 #define PRS_REG_PACKET_REGIONS_TYPE_3 0x40034
1887 #define PRS_REG_PACKET_REGIONS_TYPE_4 0x40038
1888 #define PRS_REG_PACKET_REGIONS_TYPE_5 0x4003c
1889 #define PRS_REG_PACKET_REGIONS_TYPE_6 0x40040
1890 #define PRS_REG_PACKET_REGIONS_TYPE_7 0x40044
1891 /* [R 2] debug only: Number of pending requests for CAC on port 0. */
1892 #define PRS_REG_PENDING_BRB_CAC0_RQ 0x40174
1893 /* [R 2] debug only: Number of pending requests for header parsing. */
1894 #define PRS_REG_PENDING_BRB_PRS_RQ 0x40170
1895 /* [R 1] Interrupt register #0 read */
1896 #define PRS_REG_PRS_INT_STS 0x40188
1897 /* [RW 8] Parity mask register #0 read/write */
1898 #define PRS_REG_PRS_PRTY_MASK 0x401a4
1899 /* [R 8] Parity register #0 read */
1900 #define PRS_REG_PRS_PRTY_STS 0x40198
1901 /* [RW 8] Context region for pure acknowledge packets. Used in CFC load
1903 #define PRS_REG_PURE_REGIONS 0x40024
1904 /* [R 32] debug only: Serial number status lsb 32 bits. '1' indicates this
1905 serail number was released by SDM but cannot be used because a previous
1906 serial number was not released. */
1907 #define PRS_REG_SERIAL_NUM_STATUS_LSB 0x40154
1908 /* [R 32] debug only: Serial number status msb 32 bits. '1' indicates this
1909 serail number was released by SDM but cannot be used because a previous
1910 serial number was not released. */
1911 #define PRS_REG_SERIAL_NUM_STATUS_MSB 0x40158
1912 /* [R 4] debug only: SRC current credit. Transaction based. */
1913 #define PRS_REG_SRC_CURRENT_CREDIT 0x4016c
1914 /* [R 8] debug only: TCM current credit. Cycle based. */
1915 #define PRS_REG_TCM_CURRENT_CREDIT 0x40160
1916 /* [R 8] debug only: TSDM current credit. Transaction based. */
1917 #define PRS_REG_TSDM_CURRENT_CREDIT 0x4015c
1918 /* [R 6] Debug only: Number of used entries in the data FIFO */
1919 #define PXP2_REG_HST_DATA_FIFO_STATUS 0x12047c
1920 /* [R 7] Debug only: Number of used entries in the header FIFO */
1921 #define PXP2_REG_HST_HEADER_FIFO_STATUS 0x120478
1922 #define PXP2_REG_PGL_ADDR_88_F0 0x120534
1923 #define PXP2_REG_PGL_ADDR_8C_F0 0x120538
1924 #define PXP2_REG_PGL_ADDR_90_F0 0x12053c
1925 #define PXP2_REG_PGL_ADDR_94_F0 0x120540
1926 #define PXP2_REG_PGL_CONTROL0 0x120490
1927 #define PXP2_REG_PGL_CONTROL1 0x120514
1928 #define PXP2_REG_PGL_DEBUG 0x120520
1929 /* [RW 32] third dword data of expansion rom request. this register is
1930 special. reading from it provides a vector outstanding read requests. if
1931 a bit is zero it means that a read request on the corresponding tag did
1932 not finish yet (not all completions have arrived for it) */
1933 #define PXP2_REG_PGL_EXP_ROM2 0x120808
1934 /* [RW 32] Inbound interrupt table for CSDM: bits[31:16]-mask;
1935 its[15:0]-address */
1936 #define PXP2_REG_PGL_INT_CSDM_0 0x1204f4
1937 #define PXP2_REG_PGL_INT_CSDM_1 0x1204f8
1938 #define PXP2_REG_PGL_INT_CSDM_2 0x1204fc
1939 #define PXP2_REG_PGL_INT_CSDM_3 0x120500
1940 #define PXP2_REG_PGL_INT_CSDM_4 0x120504
1941 #define PXP2_REG_PGL_INT_CSDM_5 0x120508
1942 #define PXP2_REG_PGL_INT_CSDM_6 0x12050c
1943 #define PXP2_REG_PGL_INT_CSDM_7 0x120510
1944 /* [RW 32] Inbound interrupt table for TSDM: bits[31:16]-mask;
1945 its[15:0]-address */
1946 #define PXP2_REG_PGL_INT_TSDM_0 0x120494
1947 #define PXP2_REG_PGL_INT_TSDM_1 0x120498
1948 #define PXP2_REG_PGL_INT_TSDM_2 0x12049c
1949 #define PXP2_REG_PGL_INT_TSDM_3 0x1204a0
1950 #define PXP2_REG_PGL_INT_TSDM_4 0x1204a4
1951 #define PXP2_REG_PGL_INT_TSDM_5 0x1204a8
1952 #define PXP2_REG_PGL_INT_TSDM_6 0x1204ac
1953 #define PXP2_REG_PGL_INT_TSDM_7 0x1204b0
1954 /* [RW 32] Inbound interrupt table for USDM: bits[31:16]-mask;
1955 its[15:0]-address */
1956 #define PXP2_REG_PGL_INT_USDM_0 0x1204b4
1957 #define PXP2_REG_PGL_INT_USDM_1 0x1204b8
1958 #define PXP2_REG_PGL_INT_USDM_2 0x1204bc
1959 #define PXP2_REG_PGL_INT_USDM_3 0x1204c0
1960 #define PXP2_REG_PGL_INT_USDM_4 0x1204c4
1961 #define PXP2_REG_PGL_INT_USDM_5 0x1204c8
1962 #define PXP2_REG_PGL_INT_USDM_6 0x1204cc
1963 #define PXP2_REG_PGL_INT_USDM_7 0x1204d0
1964 /* [RW 32] Inbound interrupt table for XSDM: bits[31:16]-mask;
1965 its[15:0]-address */
1966 #define PXP2_REG_PGL_INT_XSDM_0 0x1204d4
1967 #define PXP2_REG_PGL_INT_XSDM_1 0x1204d8
1968 #define PXP2_REG_PGL_INT_XSDM_2 0x1204dc
1969 #define PXP2_REG_PGL_INT_XSDM_3 0x1204e0
1970 #define PXP2_REG_PGL_INT_XSDM_4 0x1204e4
1971 #define PXP2_REG_PGL_INT_XSDM_5 0x1204e8
1972 #define PXP2_REG_PGL_INT_XSDM_6 0x1204ec
1973 #define PXP2_REG_PGL_INT_XSDM_7 0x1204f0
1974 /* [RW 3] this field allows one function to pretend being another function
1975 when accessing any BAR mapped resource within the device. the value of
1976 the field is the number of the function that will be accessed
1977 effectively. after software write to this bit it must read it in order to
1978 know that the new value is updated */
1979 #define PXP2_REG_PGL_PRETEND_FUNC_F0 0x120674
1980 #define PXP2_REG_PGL_PRETEND_FUNC_F1 0x120678
1981 #define PXP2_REG_PGL_PRETEND_FUNC_F2 0x12067c
1982 #define PXP2_REG_PGL_PRETEND_FUNC_F3 0x120680
1983 #define PXP2_REG_PGL_PRETEND_FUNC_F4 0x120684
1984 #define PXP2_REG_PGL_PRETEND_FUNC_F5 0x120688
1985 #define PXP2_REG_PGL_PRETEND_FUNC_F6 0x12068c
1986 #define PXP2_REG_PGL_PRETEND_FUNC_F7 0x120690
1987 /* [R 1] this bit indicates that a read request was blocked because of
1988 bus_master_en was deasserted */
1989 #define PXP2_REG_PGL_READ_BLOCKED 0x120568
1990 #define PXP2_REG_PGL_TAGS_LIMIT 0x1205a8
1991 /* [R 18] debug only */
1992 #define PXP2_REG_PGL_TXW_CDTS 0x12052c
1993 /* [R 1] this bit indicates that a write request was blocked because of
1994 bus_master_en was deasserted */
1995 #define PXP2_REG_PGL_WRITE_BLOCKED 0x120564
1996 #define PXP2_REG_PSWRQ_BW_ADD1 0x1201c0
1997 #define PXP2_REG_PSWRQ_BW_ADD10 0x1201e4
1998 #define PXP2_REG_PSWRQ_BW_ADD11 0x1201e8
1999 #define PXP2_REG_PSWRQ_BW_ADD2 0x1201c4
2000 #define PXP2_REG_PSWRQ_BW_ADD28 0x120228
2001 #define PXP2_REG_PSWRQ_BW_ADD3 0x1201c8
2002 #define PXP2_REG_PSWRQ_BW_ADD6 0x1201d4
2003 #define PXP2_REG_PSWRQ_BW_ADD7 0x1201d8
2004 #define PXP2_REG_PSWRQ_BW_ADD8 0x1201dc
2005 #define PXP2_REG_PSWRQ_BW_ADD9 0x1201e0
2006 #define PXP2_REG_PSWRQ_BW_CREDIT 0x12032c
2007 #define PXP2_REG_PSWRQ_BW_L1 0x1202b0
2008 #define PXP2_REG_PSWRQ_BW_L10 0x1202d4
2009 #define PXP2_REG_PSWRQ_BW_L11 0x1202d8
2010 #define PXP2_REG_PSWRQ_BW_L2 0x1202b4
2011 #define PXP2_REG_PSWRQ_BW_L28 0x120318
2012 #define PXP2_REG_PSWRQ_BW_L3 0x1202b8
2013 #define PXP2_REG_PSWRQ_BW_L6 0x1202c4
2014 #define PXP2_REG_PSWRQ_BW_L7 0x1202c8
2015 #define PXP2_REG_PSWRQ_BW_L8 0x1202cc
2016 #define PXP2_REG_PSWRQ_BW_L9 0x1202d0
2017 #define PXP2_REG_PSWRQ_BW_RD 0x120324
2018 #define PXP2_REG_PSWRQ_BW_UB1 0x120238
2019 #define PXP2_REG_PSWRQ_BW_UB10 0x12025c
2020 #define PXP2_REG_PSWRQ_BW_UB11 0x120260
2021 #define PXP2_REG_PSWRQ_BW_UB2 0x12023c
2022 #define PXP2_REG_PSWRQ_BW_UB28 0x1202a0
2023 #define PXP2_REG_PSWRQ_BW_UB3 0x120240
2024 #define PXP2_REG_PSWRQ_BW_UB6 0x12024c
2025 #define PXP2_REG_PSWRQ_BW_UB7 0x120250
2026 #define PXP2_REG_PSWRQ_BW_UB8 0x120254
2027 #define PXP2_REG_PSWRQ_BW_UB9 0x120258
2028 #define PXP2_REG_PSWRQ_BW_WR 0x120328
2029 #define PXP2_REG_PSWRQ_CDU0_L2P 0x120000
2030 #define PXP2_REG_PSWRQ_QM0_L2P 0x120038
2031 #define PXP2_REG_PSWRQ_SRC0_L2P 0x120054
2032 #define PXP2_REG_PSWRQ_TM0_L2P 0x12001c
2033 #define PXP2_REG_PSWRQ_TSDM0_L2P 0x1200e0
2034 /* [RW 32] Interrupt mask register #0 read/write */
2035 #define PXP2_REG_PXP2_INT_MASK_0 0x120578
2036 /* [R 32] Interrupt register #0 read */
2037 #define PXP2_REG_PXP2_INT_STS_0 0x12056c
2038 #define PXP2_REG_PXP2_INT_STS_1 0x120608
2039 /* [RC 32] Interrupt register #0 read clear */
2040 #define PXP2_REG_PXP2_INT_STS_CLR_0 0x120570
2041 /* [RW 32] Parity mask register #0 read/write */
2042 #define PXP2_REG_PXP2_PRTY_MASK_0 0x120588
2043 #define PXP2_REG_PXP2_PRTY_MASK_1 0x120598
2044 /* [R 32] Parity register #0 read */
2045 #define PXP2_REG_PXP2_PRTY_STS_0 0x12057c
2046 #define PXP2_REG_PXP2_PRTY_STS_1 0x12058c
2047 /* [R 1] Debug only: The 'almost full' indication from each fifo (gives
2048 indication about backpressure) */
2049 #define PXP2_REG_RD_ALMOST_FULL_0 0x120424
2050 /* [R 8] Debug only: The blocks counter - number of unused block ids */
2051 #define PXP2_REG_RD_BLK_CNT 0x120418
2052 /* [RW 8] Debug only: Total number of available blocks in Tetris Buffer.
2053 Must be bigger than 6. Normally should not be changed. */
2054 #define PXP2_REG_RD_BLK_NUM_CFG 0x12040c
2055 /* [RW 2] CDU byte swapping mode configuration for master read requests */
2056 #define PXP2_REG_RD_CDURD_SWAP_MODE 0x120404
2057 /* [RW 1] When '1'; inputs to the PSWRD block are ignored */
2058 #define PXP2_REG_RD_DISABLE_INPUTS 0x120374
2059 /* [R 1] PSWRD internal memories initialization is done */
2060 #define PXP2_REG_RD_INIT_DONE 0x120370
2061 /* [RW 8] The maximum number of blocks in Tetris Buffer that can be
2062 allocated for vq10 */
2063 #define PXP2_REG_RD_MAX_BLKS_VQ10 0x1203a0
2064 /* [RW 8] The maximum number of blocks in Tetris Buffer that can be
2065 allocated for vq11 */
2066 #define PXP2_REG_RD_MAX_BLKS_VQ11 0x1203a4
2067 /* [RW 8] The maximum number of blocks in Tetris Buffer that can be
2068 allocated for vq17 */
2069 #define PXP2_REG_RD_MAX_BLKS_VQ17 0x1203bc
2070 /* [RW 8] The maximum number of blocks in Tetris Buffer that can be
2071 allocated for vq18 */
2072 #define PXP2_REG_RD_MAX_BLKS_VQ18 0x1203c0
2073 /* [RW 8] The maximum number of blocks in Tetris Buffer that can be
2074 allocated for vq19 */
2075 #define PXP2_REG_RD_MAX_BLKS_VQ19 0x1203c4
2076 /* [RW 8] The maximum number of blocks in Tetris Buffer that can be
2077 allocated for vq22 */
2078 #define PXP2_REG_RD_MAX_BLKS_VQ22 0x1203d0
2079 /* [RW 8] The maximum number of blocks in Tetris Buffer that can be
2080 allocated for vq25 */
2081 #define PXP2_REG_RD_MAX_BLKS_VQ25 0x1203dc
2082 /* [RW 8] The maximum number of blocks in Tetris Buffer that can be
2083 allocated for vq6 */
2084 #define PXP2_REG_RD_MAX_BLKS_VQ6 0x120390
2085 /* [RW 8] The maximum number of blocks in Tetris Buffer that can be
2086 allocated for vq9 */
2087 #define PXP2_REG_RD_MAX_BLKS_VQ9 0x12039c
2088 /* [RW 2] PBF byte swapping mode configuration for master read requests */
2089 #define PXP2_REG_RD_PBF_SWAP_MODE 0x1203f4
2090 /* [R 1] Debug only: Indication if delivery ports are idle */
2091 #define PXP2_REG_RD_PORT_IS_IDLE_0 0x12041c
2092 #define PXP2_REG_RD_PORT_IS_IDLE_1 0x120420
2093 /* [RW 2] QM byte swapping mode configuration for master read requests */
2094 #define PXP2_REG_RD_QM_SWAP_MODE 0x1203f8
2095 /* [R 7] Debug only: The SR counter - number of unused sub request ids */
2096 #define PXP2_REG_RD_SR_CNT 0x120414
2097 /* [RW 2] SRC byte swapping mode configuration for master read requests */
2098 #define PXP2_REG_RD_SRC_SWAP_MODE 0x120400
2099 /* [RW 7] Debug only: Total number of available PCI read sub-requests. Must
2100 be bigger than 1. Normally should not be changed. */
2101 #define PXP2_REG_RD_SR_NUM_CFG 0x120408
2102 /* [RW 1] Signals the PSWRD block to start initializing internal memories */
2103 #define PXP2_REG_RD_START_INIT 0x12036c
2104 /* [RW 2] TM byte swapping mode configuration for master read requests */
2105 #define PXP2_REG_RD_TM_SWAP_MODE 0x1203fc
2106 /* [RW 10] Bandwidth addition to VQ0 write requests */
2107 #define PXP2_REG_RQ_BW_RD_ADD0 0x1201bc
2108 /* [RW 10] Bandwidth addition to VQ12 read requests */
2109 #define PXP2_REG_RQ_BW_RD_ADD12 0x1201ec
2110 /* [RW 10] Bandwidth addition to VQ13 read requests */
2111 #define PXP2_REG_RQ_BW_RD_ADD13 0x1201f0
2112 /* [RW 10] Bandwidth addition to VQ14 read requests */
2113 #define PXP2_REG_RQ_BW_RD_ADD14 0x1201f4
2114 /* [RW 10] Bandwidth addition to VQ15 read requests */
2115 #define PXP2_REG_RQ_BW_RD_ADD15 0x1201f8
2116 /* [RW 10] Bandwidth addition to VQ16 read requests */
2117 #define PXP2_REG_RQ_BW_RD_ADD16 0x1201fc
2118 /* [RW 10] Bandwidth addition to VQ17 read requests */
2119 #define PXP2_REG_RQ_BW_RD_ADD17 0x120200
2120 /* [RW 10] Bandwidth addition to VQ18 read requests */
2121 #define PXP2_REG_RQ_BW_RD_ADD18 0x120204
2122 /* [RW 10] Bandwidth addition to VQ19 read requests */
2123 #define PXP2_REG_RQ_BW_RD_ADD19 0x120208
2124 /* [RW 10] Bandwidth addition to VQ20 read requests */
2125 #define PXP2_REG_RQ_BW_RD_ADD20 0x12020c
2126 /* [RW 10] Bandwidth addition to VQ22 read requests */
2127 #define PXP2_REG_RQ_BW_RD_ADD22 0x120210
2128 /* [RW 10] Bandwidth addition to VQ23 read requests */
2129 #define PXP2_REG_RQ_BW_RD_ADD23 0x120214
2130 /* [RW 10] Bandwidth addition to VQ24 read requests */
2131 #define PXP2_REG_RQ_BW_RD_ADD24 0x120218
2132 /* [RW 10] Bandwidth addition to VQ25 read requests */
2133 #define PXP2_REG_RQ_BW_RD_ADD25 0x12021c
2134 /* [RW 10] Bandwidth addition to VQ26 read requests */
2135 #define PXP2_REG_RQ_BW_RD_ADD26 0x120220
2136 /* [RW 10] Bandwidth addition to VQ27 read requests */
2137 #define PXP2_REG_RQ_BW_RD_ADD27 0x120224
2138 /* [RW 10] Bandwidth addition to VQ4 read requests */
2139 #define PXP2_REG_RQ_BW_RD_ADD4 0x1201cc
2140 /* [RW 10] Bandwidth addition to VQ5 read requests */
2141 #define PXP2_REG_RQ_BW_RD_ADD5 0x1201d0
2142 /* [RW 10] Bandwidth Typical L for VQ0 Read requests */
2143 #define PXP2_REG_RQ_BW_RD_L0 0x1202ac
2144 /* [RW 10] Bandwidth Typical L for VQ12 Read requests */
2145 #define PXP2_REG_RQ_BW_RD_L12 0x1202dc
2146 /* [RW 10] Bandwidth Typical L for VQ13 Read requests */
2147 #define PXP2_REG_RQ_BW_RD_L13 0x1202e0
2148 /* [RW 10] Bandwidth Typical L for VQ14 Read requests */
2149 #define PXP2_REG_RQ_BW_RD_L14 0x1202e4
2150 /* [RW 10] Bandwidth Typical L for VQ15 Read requests */
2151 #define PXP2_REG_RQ_BW_RD_L15 0x1202e8
2152 /* [RW 10] Bandwidth Typical L for VQ16 Read requests */
2153 #define PXP2_REG_RQ_BW_RD_L16 0x1202ec
2154 /* [RW 10] Bandwidth Typical L for VQ17 Read requests */
2155 #define PXP2_REG_RQ_BW_RD_L17 0x1202f0
2156 /* [RW 10] Bandwidth Typical L for VQ18 Read requests */
2157 #define PXP2_REG_RQ_BW_RD_L18 0x1202f4
2158 /* [RW 10] Bandwidth Typical L for VQ19 Read requests */
2159 #define PXP2_REG_RQ_BW_RD_L19 0x1202f8
2160 /* [RW 10] Bandwidth Typical L for VQ20 Read requests */
2161 #define PXP2_REG_RQ_BW_RD_L20 0x1202fc
2162 /* [RW 10] Bandwidth Typical L for VQ22 Read requests */
2163 #define PXP2_REG_RQ_BW_RD_L22 0x120300
2164 /* [RW 10] Bandwidth Typical L for VQ23 Read requests */
2165 #define PXP2_REG_RQ_BW_RD_L23 0x120304
2166 /* [RW 10] Bandwidth Typical L for VQ24 Read requests */
2167 #define PXP2_REG_RQ_BW_RD_L24 0x120308
2168 /* [RW 10] Bandwidth Typical L for VQ25 Read requests */
2169 #define PXP2_REG_RQ_BW_RD_L25 0x12030c
2170 /* [RW 10] Bandwidth Typical L for VQ26 Read requests */
2171 #define PXP2_REG_RQ_BW_RD_L26 0x120310
2172 /* [RW 10] Bandwidth Typical L for VQ27 Read requests */
2173 #define PXP2_REG_RQ_BW_RD_L27 0x120314
2174 /* [RW 10] Bandwidth Typical L for VQ4 Read requests */
2175 #define PXP2_REG_RQ_BW_RD_L4 0x1202bc
2176 /* [RW 10] Bandwidth Typical L for VQ5 Read- currently not used */
2177 #define PXP2_REG_RQ_BW_RD_L5 0x1202c0
2178 /* [RW 7] Bandwidth upper bound for VQ0 read requests */
2179 #define PXP2_REG_RQ_BW_RD_UBOUND0 0x120234
2180 /* [RW 7] Bandwidth upper bound for VQ12 read requests */
2181 #define PXP2_REG_RQ_BW_RD_UBOUND12 0x120264
2182 /* [RW 7] Bandwidth upper bound for VQ13 read requests */
2183 #define PXP2_REG_RQ_BW_RD_UBOUND13 0x120268
2184 /* [RW 7] Bandwidth upper bound for VQ14 read requests */
2185 #define PXP2_REG_RQ_BW_RD_UBOUND14 0x12026c
2186 /* [RW 7] Bandwidth upper bound for VQ15 read requests */
2187 #define PXP2_REG_RQ_BW_RD_UBOUND15 0x120270
2188 /* [RW 7] Bandwidth upper bound for VQ16 read requests */
2189 #define PXP2_REG_RQ_BW_RD_UBOUND16 0x120274
2190 /* [RW 7] Bandwidth upper bound for VQ17 read requests */
2191 #define PXP2_REG_RQ_BW_RD_UBOUND17 0x120278
2192 /* [RW 7] Bandwidth upper bound for VQ18 read requests */
2193 #define PXP2_REG_RQ_BW_RD_UBOUND18 0x12027c
2194 /* [RW 7] Bandwidth upper bound for VQ19 read requests */
2195 #define PXP2_REG_RQ_BW_RD_UBOUND19 0x120280
2196 /* [RW 7] Bandwidth upper bound for VQ20 read requests */
2197 #define PXP2_REG_RQ_BW_RD_UBOUND20 0x120284
2198 /* [RW 7] Bandwidth upper bound for VQ22 read requests */
2199 #define PXP2_REG_RQ_BW_RD_UBOUND22 0x120288
2200 /* [RW 7] Bandwidth upper bound for VQ23 read requests */
2201 #define PXP2_REG_RQ_BW_RD_UBOUND23 0x12028c
2202 /* [RW 7] Bandwidth upper bound for VQ24 read requests */
2203 #define PXP2_REG_RQ_BW_RD_UBOUND24 0x120290
2204 /* [RW 7] Bandwidth upper bound for VQ25 read requests */
2205 #define PXP2_REG_RQ_BW_RD_UBOUND25 0x120294
2206 /* [RW 7] Bandwidth upper bound for VQ26 read requests */
2207 #define PXP2_REG_RQ_BW_RD_UBOUND26 0x120298
2208 /* [RW 7] Bandwidth upper bound for VQ27 read requests */
2209 #define PXP2_REG_RQ_BW_RD_UBOUND27 0x12029c
2210 /* [RW 7] Bandwidth upper bound for VQ4 read requests */
2211 #define PXP2_REG_RQ_BW_RD_UBOUND4 0x120244
2212 /* [RW 7] Bandwidth upper bound for VQ5 read requests */
2213 #define PXP2_REG_RQ_BW_RD_UBOUND5 0x120248
2214 /* [RW 10] Bandwidth addition to VQ29 write requests */
2215 #define PXP2_REG_RQ_BW_WR_ADD29 0x12022c
2216 /* [RW 10] Bandwidth addition to VQ30 write requests */
2217 #define PXP2_REG_RQ_BW_WR_ADD30 0x120230
2218 /* [RW 10] Bandwidth Typical L for VQ29 Write requests */
2219 #define PXP2_REG_RQ_BW_WR_L29 0x12031c
2220 /* [RW 10] Bandwidth Typical L for VQ30 Write requests */
2221 #define PXP2_REG_RQ_BW_WR_L30 0x120320
2222 /* [RW 7] Bandwidth upper bound for VQ29 */
2223 #define PXP2_REG_RQ_BW_WR_UBOUND29 0x1202a4
2224 /* [RW 7] Bandwidth upper bound for VQ30 */
2225 #define PXP2_REG_RQ_BW_WR_UBOUND30 0x1202a8
2226 /* [RW 18] external first_mem_addr field in L2P table for CDU module port 0 */
2227 #define PXP2_REG_RQ_CDU0_EFIRST_MEM_ADDR 0x120008
2228 /* [RW 2] Endian mode for cdu */
2229 #define PXP2_REG_RQ_CDU_ENDIAN_M 0x1201a0
2230 #define PXP2_REG_RQ_CDU_FIRST_ILT 0x12061c
2231 #define PXP2_REG_RQ_CDU_LAST_ILT 0x120620
2232 /* [RW 3] page size in L2P table for CDU module; -4k; -8k; -16k; -32k; -64k;
2234 #define PXP2_REG_RQ_CDU_P_SIZE 0x120018
2235 /* [R 1] 1' indicates that the requester has finished its internal
2237 #define PXP2_REG_RQ_CFG_DONE 0x1201b4
2238 /* [RW 2] Endian mode for debug */
2239 #define PXP2_REG_RQ_DBG_ENDIAN_M 0x1201a4
2240 /* [RW 1] When '1'; requests will enter input buffers but wont get out
2242 #define PXP2_REG_RQ_DISABLE_INPUTS 0x120330
2243 /* [RW 1] 1 - SR will be aligned by 64B; 0 - SR will be aligned by 8B */
2244 #define PXP2_REG_RQ_DRAM_ALIGN 0x1205b0
2245 /* [RW 1] If 1 ILT failiue will not result in ELT access; An interrupt will
2247 #define PXP2_REG_RQ_ELT_DISABLE 0x12066c
2248 /* [RW 2] Endian mode for hc */
2249 #define PXP2_REG_RQ_HC_ENDIAN_M 0x1201a8
2250 /* [RW 1] when '0' ILT logic will work as in A0; otherwise B0; for back
2251 compatibility needs; Note that different registers are used per mode */
2252 #define PXP2_REG_RQ_ILT_MODE 0x1205b4
2253 /* [WB 53] Onchip address table */
2254 #define PXP2_REG_RQ_ONCHIP_AT 0x122000
2255 /* [WB 53] Onchip address table - B0 */
2256 #define PXP2_REG_RQ_ONCHIP_AT_B0 0x128000
2257 /* [RW 13] Pending read limiter threshold; in Dwords */
2258 #define PXP2_REG_RQ_PDR_LIMIT 0x12033c
2259 /* [RW 2] Endian mode for qm */
2260 #define PXP2_REG_RQ_QM_ENDIAN_M 0x120194
2261 #define PXP2_REG_RQ_QM_FIRST_ILT 0x120634
2262 #define PXP2_REG_RQ_QM_LAST_ILT 0x120638
2263 /* [RW 3] page size in L2P table for QM module; -4k; -8k; -16k; -32k; -64k;
2265 #define PXP2_REG_RQ_QM_P_SIZE 0x120050
2266 /* [RW 1] 1' indicates that the RBC has finished configuring the PSWRQ */
2267 #define PXP2_REG_RQ_RBC_DONE 0x1201b0
2268 /* [RW 3] Max burst size filed for read requests port 0; 000 - 128B;
2269 001:256B; 010: 512B; 11:1K:100:2K; 01:4K */
2270 #define PXP2_REG_RQ_RD_MBS0 0x120160
2271 /* [RW 3] Max burst size filed for read requests port 1; 000 - 128B;
2272 001:256B; 010: 512B; 11:1K:100:2K; 01:4K */
2273 #define PXP2_REG_RQ_RD_MBS1 0x120168
2274 /* [RW 2] Endian mode for src */
2275 #define PXP2_REG_RQ_SRC_ENDIAN_M 0x12019c
2276 #define PXP2_REG_RQ_SRC_FIRST_ILT 0x12063c
2277 #define PXP2_REG_RQ_SRC_LAST_ILT 0x120640
2278 /* [RW 3] page size in L2P table for SRC module; -4k; -8k; -16k; -32k; -64k;
2280 #define PXP2_REG_RQ_SRC_P_SIZE 0x12006c
2281 /* [RW 2] Endian mode for tm */
2282 #define PXP2_REG_RQ_TM_ENDIAN_M 0x120198
2283 #define PXP2_REG_RQ_TM_FIRST_ILT 0x120644
2284 #define PXP2_REG_RQ_TM_LAST_ILT 0x120648
2285 /* [RW 3] page size in L2P table for TM module; -4k; -8k; -16k; -32k; -64k;
2287 #define PXP2_REG_RQ_TM_P_SIZE 0x120034
2288 /* [R 5] Number of entries in the ufifo; his fifo has l2p completions */
2289 #define PXP2_REG_RQ_UFIFO_NUM_OF_ENTRY 0x12080c
2290 /* [RW 18] external first_mem_addr field in L2P table for USDM module port 0 */
2291 #define PXP2_REG_RQ_USDM0_EFIRST_MEM_ADDR 0x120094
2292 /* [R 8] Number of entries occupied by vq 0 in pswrq memory */
2293 #define PXP2_REG_RQ_VQ0_ENTRY_CNT 0x120810
2294 /* [R 8] Number of entries occupied by vq 10 in pswrq memory */
2295 #define PXP2_REG_RQ_VQ10_ENTRY_CNT 0x120818
2296 /* [R 8] Number of entries occupied by vq 11 in pswrq memory */
2297 #define PXP2_REG_RQ_VQ11_ENTRY_CNT 0x120820
2298 /* [R 8] Number of entries occupied by vq 12 in pswrq memory */
2299 #define PXP2_REG_RQ_VQ12_ENTRY_CNT 0x120828
2300 /* [R 8] Number of entries occupied by vq 13 in pswrq memory */
2301 #define PXP2_REG_RQ_VQ13_ENTRY_CNT 0x120830
2302 /* [R 8] Number of entries occupied by vq 14 in pswrq memory */
2303 #define PXP2_REG_RQ_VQ14_ENTRY_CNT 0x120838
2304 /* [R 8] Number of entries occupied by vq 15 in pswrq memory */
2305 #define PXP2_REG_RQ_VQ15_ENTRY_CNT 0x120840
2306 /* [R 8] Number of entries occupied by vq 16 in pswrq memory */
2307 #define PXP2_REG_RQ_VQ16_ENTRY_CNT 0x120848
2308 /* [R 8] Number of entries occupied by vq 17 in pswrq memory */
2309 #define PXP2_REG_RQ_VQ17_ENTRY_CNT 0x120850
2310 /* [R 8] Number of entries occupied by vq 18 in pswrq memory */
2311 #define PXP2_REG_RQ_VQ18_ENTRY_CNT 0x120858
2312 /* [R 8] Number of entries occupied by vq 19 in pswrq memory */
2313 #define PXP2_REG_RQ_VQ19_ENTRY_CNT 0x120860
2314 /* [R 8] Number of entries occupied by vq 1 in pswrq memory */
2315 #define PXP2_REG_RQ_VQ1_ENTRY_CNT 0x120868
2316 /* [R 8] Number of entries occupied by vq 20 in pswrq memory */
2317 #define PXP2_REG_RQ_VQ20_ENTRY_CNT 0x120870
2318 /* [R 8] Number of entries occupied by vq 21 in pswrq memory */
2319 #define PXP2_REG_RQ_VQ21_ENTRY_CNT 0x120878
2320 /* [R 8] Number of entries occupied by vq 22 in pswrq memory */
2321 #define PXP2_REG_RQ_VQ22_ENTRY_CNT 0x120880
2322 /* [R 8] Number of entries occupied by vq 23 in pswrq memory */
2323 #define PXP2_REG_RQ_VQ23_ENTRY_CNT 0x120888
2324 /* [R 8] Number of entries occupied by vq 24 in pswrq memory */
2325 #define PXP2_REG_RQ_VQ24_ENTRY_CNT 0x120890
2326 /* [R 8] Number of entries occupied by vq 25 in pswrq memory */
2327 #define PXP2_REG_RQ_VQ25_ENTRY_CNT 0x120898
2328 /* [R 8] Number of entries occupied by vq 26 in pswrq memory */
2329 #define PXP2_REG_RQ_VQ26_ENTRY_CNT 0x1208a0
2330 /* [R 8] Number of entries occupied by vq 27 in pswrq memory */
2331 #define PXP2_REG_RQ_VQ27_ENTRY_CNT 0x1208a8
2332 /* [R 8] Number of entries occupied by vq 28 in pswrq memory */
2333 #define PXP2_REG_RQ_VQ28_ENTRY_CNT 0x1208b0
2334 /* [R 8] Number of entries occupied by vq 29 in pswrq memory */
2335 #define PXP2_REG_RQ_VQ29_ENTRY_CNT 0x1208b8
2336 /* [R 8] Number of entries occupied by vq 2 in pswrq memory */
2337 #define PXP2_REG_RQ_VQ2_ENTRY_CNT 0x1208c0
2338 /* [R 8] Number of entries occupied by vq 30 in pswrq memory */
2339 #define PXP2_REG_RQ_VQ30_ENTRY_CNT 0x1208c8
2340 /* [R 8] Number of entries occupied by vq 31 in pswrq memory */
2341 #define PXP2_REG_RQ_VQ31_ENTRY_CNT 0x1208d0
2342 /* [R 8] Number of entries occupied by vq 3 in pswrq memory */
2343 #define PXP2_REG_RQ_VQ3_ENTRY_CNT 0x1208d8
2344 /* [R 8] Number of entries occupied by vq 4 in pswrq memory */
2345 #define PXP2_REG_RQ_VQ4_ENTRY_CNT 0x1208e0
2346 /* [R 8] Number of entries occupied by vq 5 in pswrq memory */
2347 #define PXP2_REG_RQ_VQ5_ENTRY_CNT 0x1208e8
2348 /* [R 8] Number of entries occupied by vq 6 in pswrq memory */
2349 #define PXP2_REG_RQ_VQ6_ENTRY_CNT 0x1208f0
2350 /* [R 8] Number of entries occupied by vq 7 in pswrq memory */
2351 #define PXP2_REG_RQ_VQ7_ENTRY_CNT 0x1208f8
2352 /* [R 8] Number of entries occupied by vq 8 in pswrq memory */
2353 #define PXP2_REG_RQ_VQ8_ENTRY_CNT 0x120900
2354 /* [R 8] Number of entries occupied by vq 9 in pswrq memory */
2355 #define PXP2_REG_RQ_VQ9_ENTRY_CNT 0x120908
2356 /* [RW 3] Max burst size filed for write requests port 0; 000 - 128B;
2357 001:256B; 010: 512B; */
2358 #define PXP2_REG_RQ_WR_MBS0 0x12015c
2359 /* [RW 3] Max burst size filed for write requests port 1; 000 - 128B;
2360 001:256B; 010: 512B; */
2361 #define PXP2_REG_RQ_WR_MBS1 0x120164
2362 /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
2363 buffer reaches this number has_payload will be asserted */
2364 #define PXP2_REG_WR_CDU_MPS 0x1205f0
2365 /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
2366 buffer reaches this number has_payload will be asserted */
2367 #define PXP2_REG_WR_CSDM_MPS 0x1205d0
2368 /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
2369 buffer reaches this number has_payload will be asserted */
2370 #define PXP2_REG_WR_DBG_MPS 0x1205e8
2371 /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
2372 buffer reaches this number has_payload will be asserted */
2373 #define PXP2_REG_WR_DMAE_MPS 0x1205ec
2374 /* [RW 10] if Number of entries in dmae fifo will be higher than this
2375 threshold then has_payload indication will be asserted; the default value
2376 should be equal to > write MBS size! */
2377 #define PXP2_REG_WR_DMAE_TH 0x120368
2378 /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
2379 buffer reaches this number has_payload will be asserted */
2380 #define PXP2_REG_WR_HC_MPS 0x1205c8
2381 /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
2382 buffer reaches this number has_payload will be asserted */
2383 #define PXP2_REG_WR_QM_MPS 0x1205dc
2384 /* [RW 1] 0 - working in A0 mode; - working in B0 mode */
2385 #define PXP2_REG_WR_REV_MODE 0x120670
2386 /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
2387 buffer reaches this number has_payload will be asserted */
2388 #define PXP2_REG_WR_SRC_MPS 0x1205e4
2389 /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
2390 buffer reaches this number has_payload will be asserted */
2391 #define PXP2_REG_WR_TM_MPS 0x1205e0
2392 /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
2393 buffer reaches this number has_payload will be asserted */
2394 #define PXP2_REG_WR_TSDM_MPS 0x1205d4
2395 /* [RW 10] if Number of entries in usdmdp fifo will be higher than this
2396 threshold then has_payload indication will be asserted; the default value
2397 should be equal to > write MBS size! */
2398 #define PXP2_REG_WR_USDMDP_TH 0x120348
2399 /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
2400 buffer reaches this number has_payload will be asserted */
2401 #define PXP2_REG_WR_USDM_MPS 0x1205cc
2402 /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
2403 buffer reaches this number has_payload will be asserted */
2404 #define PXP2_REG_WR_XSDM_MPS 0x1205d8
2405 /* [R 1] debug only: Indication if PSWHST arbiter is idle */
2406 #define PXP_REG_HST_ARB_IS_IDLE 0x103004
2407 /* [R 8] debug only: A bit mask for all PSWHST arbiter clients. '1' means
2408 this client is waiting for the arbiter. */
2409 #define PXP_REG_HST_CLIENTS_WAITING_TO_ARB 0x103008
2410 /* [R 1] debug only: '1' means this PSWHST is discarding doorbells. This bit
2411 should update accoring to 'hst_discard_doorbells' register when the state
2413 #define PXP_REG_HST_DISCARD_DOORBELLS_STATUS 0x1030a0
2414 /* [R 6] debug only: A bit mask for all PSWHST internal write clients. '1'
2415 means this PSWHST is discarding inputs from this client. Each bit should
2416 update accoring to 'hst_discard_internal_writes' register when the state
2418 #define PXP_REG_HST_DISCARD_INTERNAL_WRITES_STATUS 0x10309c
2419 /* [WB 160] Used for initialization of the inbound interrupts memory */
2420 #define PXP_REG_HST_INBOUND_INT 0x103800
2421 /* [RW 32] Interrupt mask register #0 read/write */
2422 #define PXP_REG_PXP_INT_MASK_0 0x103074
2423 #define PXP_REG_PXP_INT_MASK_1 0x103084
2424 /* [R 32] Interrupt register #0 read */
2425 #define PXP_REG_PXP_INT_STS_0 0x103068
2426 #define PXP_REG_PXP_INT_STS_1 0x103078
2427 /* [RC 32] Interrupt register #0 read clear */
2428 #define PXP_REG_PXP_INT_STS_CLR_0 0x10306c
2429 /* [RW 26] Parity mask register #0 read/write */
2430 #define PXP_REG_PXP_PRTY_MASK 0x103094
2431 /* [R 26] Parity register #0 read */
2432 #define PXP_REG_PXP_PRTY_STS 0x103088
2433 /* [RW 4] The activity counter initial increment value sent in the load
2435 #define QM_REG_ACTCTRINITVAL_0 0x168040
2436 #define QM_REG_ACTCTRINITVAL_1 0x168044
2437 #define QM_REG_ACTCTRINITVAL_2 0x168048
2438 #define QM_REG_ACTCTRINITVAL_3 0x16804c
2439 /* [RW 32] The base logical address (in bytes) of each physical queue. The
2440 index I represents the physical queue number. The 12 lsbs are ignore and
2441 considered zero so practically there are only 20 bits in this register;
2443 #define QM_REG_BASEADDR 0x168900
2444 /* [RW 32] The base logical address (in bytes) of each physical queue. The
2445 index I represents the physical queue number. The 12 lsbs are ignore and
2446 considered zero so practically there are only 20 bits in this register;
2448 #define QM_REG_BASEADDR_EXT_A 0x16e100
2449 /* [RW 16] The byte credit cost for each task. This value is for both ports */
2450 #define QM_REG_BYTECRDCOST 0x168234
2451 /* [RW 16] The initial byte credit value for both ports. */
2452 #define QM_REG_BYTECRDINITVAL 0x168238
2453 /* [RW 32] A bit per physical queue. If the bit is cleared then the physical
2454 queue uses port 0 else it uses port 1; queues 31-0 */
2455 #define QM_REG_BYTECRDPORT_LSB 0x168228
2456 /* [RW 32] A bit per physical queue. If the bit is cleared then the physical
2457 queue uses port 0 else it uses port 1; queues 95-64 */
2458 #define QM_REG_BYTECRDPORT_LSB_EXT_A 0x16e520
2459 /* [RW 32] A bit per physical queue. If the bit is cleared then the physical
2460 queue uses port 0 else it uses port 1; queues 63-32 */
2461 #define QM_REG_BYTECRDPORT_MSB 0x168224
2462 /* [RW 32] A bit per physical queue. If the bit is cleared then the physical
2463 queue uses port 0 else it uses port 1; queues 127-96 */
2464 #define QM_REG_BYTECRDPORT_MSB_EXT_A 0x16e51c
2465 /* [RW 16] The byte credit value that if above the QM is considered almost
2467 #define QM_REG_BYTECREDITAFULLTHR 0x168094
2468 /* [RW 4] The initial credit for interface */
2469 #define QM_REG_CMINITCRD_0 0x1680cc
2470 #define QM_REG_CMINITCRD_1 0x1680d0
2471 #define QM_REG_CMINITCRD_2 0x1680d4
2472 #define QM_REG_CMINITCRD_3 0x1680d8
2473 #define QM_REG_CMINITCRD_4 0x1680dc
2474 #define QM_REG_CMINITCRD_5 0x1680e0
2475 #define QM_REG_CMINITCRD_6 0x1680e4
2476 #define QM_REG_CMINITCRD_7 0x1680e8
2477 /* [RW 8] A mask bit per CM interface. If this bit is 0 then this interface
2479 #define QM_REG_CMINTEN 0x1680ec
2480 /* [RW 12] A bit vector which indicates which one of the queues are tied to
2482 #define QM_REG_CMINTVOQMASK_0 0x1681f4
2483 #define QM_REG_CMINTVOQMASK_1 0x1681f8
2484 #define QM_REG_CMINTVOQMASK_2 0x1681fc
2485 #define QM_REG_CMINTVOQMASK_3 0x168200
2486 #define QM_REG_CMINTVOQMASK_4 0x168204
2487 #define QM_REG_CMINTVOQMASK_5 0x168208
2488 #define QM_REG_CMINTVOQMASK_6 0x16820c
2489 #define QM_REG_CMINTVOQMASK_7 0x168210
2490 /* [RW 20] The number of connections divided by 16 which dictates the size
2491 of each queue which belongs to even function number. */
2492 #define QM_REG_CONNNUM_0 0x168020
2493 /* [R 6] Keep the fill level of the fifo from write client 4 */
2494 #define QM_REG_CQM_WRC_FIFOLVL 0x168018
2495 /* [RW 8] The context regions sent in the CFC load request */
2496 #define QM_REG_CTXREG_0 0x168030
2497 #define QM_REG_CTXREG_1 0x168034
2498 #define QM_REG_CTXREG_2 0x168038
2499 #define QM_REG_CTXREG_3 0x16803c
2500 /* [RW 12] The VOQ mask used to select the VOQs which needs to be full for
2502 #define QM_REG_ENBYPVOQMASK 0x16823c
2503 /* [RW 32] A bit mask per each physical queue. If a bit is set then the
2504 physical queue uses the byte credit; queues 31-0 */
2505 #define QM_REG_ENBYTECRD_LSB 0x168220
2506 /* [RW 32] A bit mask per each physical queue. If a bit is set then the
2507 physical queue uses the byte credit; queues 95-64 */
2508 #define QM_REG_ENBYTECRD_LSB_EXT_A 0x16e518
2509 /* [RW 32] A bit mask per each physical queue. If a bit is set then the
2510 physical queue uses the byte credit; queues 63-32 */
2511 #define QM_REG_ENBYTECRD_MSB 0x16821c
2512 /* [RW 32] A bit mask per each physical queue. If a bit is set then the
2513 physical queue uses the byte credit; queues 127-96 */
2514 #define QM_REG_ENBYTECRD_MSB_EXT_A 0x16e514
2515 /* [RW 4] If cleared then the secondary interface will not be served by the
2517 #define QM_REG_ENSEC 0x1680f0
2519 #define QM_REG_FUNCNUMSEL_LSB 0x168230
2521 #define QM_REG_FUNCNUMSEL_MSB 0x16822c
2522 /* [RW 32] A mask register to mask the Almost empty signals which will not
2523 be use for the almost empty indication to the HW block; queues 31:0 */
2524 #define QM_REG_HWAEMPTYMASK_LSB 0x168218
2525 /* [RW 32] A mask register to mask the Almost empty signals which will not
2526 be use for the almost empty indication to the HW block; queues 95-64 */
2527 #define QM_REG_HWAEMPTYMASK_LSB_EXT_A 0x16e510
2528 /* [RW 32] A mask register to mask the Almost empty signals which will not
2529 be use for the almost empty indication to the HW block; queues 63:32 */
2530 #define QM_REG_HWAEMPTYMASK_MSB 0x168214
2531 /* [RW 32] A mask register to mask the Almost empty signals which will not
2532 be use for the almost empty indication to the HW block; queues 127-96 */
2533 #define QM_REG_HWAEMPTYMASK_MSB_EXT_A 0x16e50c
2534 /* [RW 4] The number of outstanding request to CFC */
2535 #define QM_REG_OUTLDREQ 0x168804
2536 /* [RC 1] A flag to indicate that overflow error occurred in one of the
2538 #define QM_REG_OVFERROR 0x16805c
2539 /* [RC 7] the Q where the overflow occurs */
2540 #define QM_REG_OVFQNUM 0x168058
2541 /* [R 16] Pause state for physical queues 15-0 */
2542 #define QM_REG_PAUSESTATE0 0x168410
2543 /* [R 16] Pause state for physical queues 31-16 */
2544 #define QM_REG_PAUSESTATE1 0x168414
2545 /* [R 16] Pause state for physical queues 47-32 */
2546 #define QM_REG_PAUSESTATE2 0x16e684
2547 /* [R 16] Pause state for physical queues 63-48 */
2548 #define QM_REG_PAUSESTATE3 0x16e688
2549 /* [R 16] Pause state for physical queues 79-64 */
2550 #define QM_REG_PAUSESTATE4 0x16e68c
2551 /* [R 16] Pause state for physical queues 95-80 */
2552 #define QM_REG_PAUSESTATE5 0x16e690
2553 /* [R 16] Pause state for physical queues 111-96 */
2554 #define QM_REG_PAUSESTATE6 0x16e694
2555 /* [R 16] Pause state for physical queues 127-112 */
2556 #define QM_REG_PAUSESTATE7 0x16e698
2557 /* [RW 2] The PCI attributes field used in the PCI request. */
2558 #define QM_REG_PCIREQAT 0x168054
2559 /* [R 16] The byte credit of port 0 */
2560 #define QM_REG_PORT0BYTECRD 0x168300
2561 /* [R 16] The byte credit of port 1 */
2562 #define QM_REG_PORT1BYTECRD 0x168304
2563 /* [RW 3] pci function number of queues 15-0 */
2564 #define QM_REG_PQ2PCIFUNC_0 0x16e6bc
2565 #define QM_REG_PQ2PCIFUNC_1 0x16e6c0
2566 #define QM_REG_PQ2PCIFUNC_2 0x16e6c4
2567 #define QM_REG_PQ2PCIFUNC_3 0x16e6c8
2568 #define QM_REG_PQ2PCIFUNC_4 0x16e6cc
2569 #define QM_REG_PQ2PCIFUNC_5 0x16e6d0
2570 #define QM_REG_PQ2PCIFUNC_6 0x16e6d4
2571 #define QM_REG_PQ2PCIFUNC_7 0x16e6d8
2572 /* [WB 54] Pointer Table Memory for queues 63-0; The mapping is as follow:
2573 ptrtbl[53:30] read pointer; ptrtbl[29:6] write pointer; ptrtbl[5:4] read
2574 bank0; ptrtbl[3:2] read bank 1; ptrtbl[1:0] write bank; */
2575 #define QM_REG_PTRTBL 0x168a00
2576 /* [WB 54] Pointer Table Memory for queues 127-64; The mapping is as follow:
2577 ptrtbl[53:30] read pointer; ptrtbl[29:6] write pointer; ptrtbl[5:4] read
2578 bank0; ptrtbl[3:2] read bank 1; ptrtbl[1:0] write bank; */
2579 #define QM_REG_PTRTBL_EXT_A 0x16e200
2580 /* [RW 2] Interrupt mask register #0 read/write */
2581 #define QM_REG_QM_INT_MASK 0x168444
2582 /* [R 2] Interrupt register #0 read */
2583 #define QM_REG_QM_INT_STS 0x168438
2584 /* [RW 12] Parity mask register #0 read/write */
2585 #define QM_REG_QM_PRTY_MASK 0x168454
2586 /* [R 12] Parity register #0 read */
2587 #define QM_REG_QM_PRTY_STS 0x168448
2588 /* [R 32] Current queues in pipeline: Queues from 32 to 63 */
2589 #define QM_REG_QSTATUS_HIGH 0x16802c
2590 /* [R 32] Current queues in pipeline: Queues from 96 to 127 */
2591 #define QM_REG_QSTATUS_HIGH_EXT_A 0x16e408
2592 /* [R 32] Current queues in pipeline: Queues from 0 to 31 */
2593 #define QM_REG_QSTATUS_LOW 0x168028
2594 /* [R 32] Current queues in pipeline: Queues from 64 to 95 */
2595 #define QM_REG_QSTATUS_LOW_EXT_A 0x16e404
2596 /* [R 24] The number of tasks queued for each queue; queues 63-0 */
2597 #define QM_REG_QTASKCTR_0 0x168308
2598 /* [R 24] The number of tasks queued for each queue; queues 127-64 */
2599 #define QM_REG_QTASKCTR_EXT_A_0 0x16e584
2600 /* [RW 4] Queue tied to VOQ */
2601 #define QM_REG_QVOQIDX_0 0x1680f4
2602 #define QM_REG_QVOQIDX_10 0x16811c
2603 #define QM_REG_QVOQIDX_100 0x16e49c
2604 #define QM_REG_QVOQIDX_101 0x16e4a0
2605 #define QM_REG_QVOQIDX_102 0x16e4a4
2606 #define QM_REG_QVOQIDX_103 0x16e4a8
2607 #define QM_REG_QVOQIDX_104 0x16e4ac
2608 #define QM_REG_QVOQIDX_105 0x16e4b0
2609 #define QM_REG_QVOQIDX_106 0x16e4b4
2610 #define QM_REG_QVOQIDX_107 0x16e4b8
2611 #define QM_REG_QVOQIDX_108 0x16e4bc
2612 #define QM_REG_QVOQIDX_109 0x16e4c0
2613 #define QM_REG_QVOQIDX_11 0x168120
2614 #define QM_REG_QVOQIDX_110 0x16e4c4
2615 #define QM_REG_QVOQIDX_111 0x16e4c8
2616 #define QM_REG_QVOQIDX_112 0x16e4cc
2617 #define QM_REG_QVOQIDX_113 0x16e4d0
2618 #define QM_REG_QVOQIDX_114 0x16e4d4
2619 #define QM_REG_QVOQIDX_115 0x16e4d8
2620 #define QM_REG_QVOQIDX_116 0x16e4dc
2621 #define QM_REG_QVOQIDX_117 0x16e4e0
2622 #define QM_REG_QVOQIDX_118 0x16e4e4
2623 #define QM_REG_QVOQIDX_119 0x16e4e8
2624 #define QM_REG_QVOQIDX_12 0x168124
2625 #define QM_REG_QVOQIDX_120 0x16e4ec
2626 #define QM_REG_QVOQIDX_121 0x16e4f0
2627 #define QM_REG_QVOQIDX_122 0x16e4f4
2628 #define QM_REG_QVOQIDX_123 0x16e4f8
2629 #define QM_REG_QVOQIDX_124 0x16e4fc
2630 #define QM_REG_QVOQIDX_125 0x16e500
2631 #define QM_REG_QVOQIDX_126 0x16e504
2632 #define QM_REG_QVOQIDX_127 0x16e508
2633 #define QM_REG_QVOQIDX_13 0x168128
2634 #define QM_REG_QVOQIDX_14 0x16812c
2635 #define QM_REG_QVOQIDX_15 0x168130
2636 #define QM_REG_QVOQIDX_16 0x168134
2637 #define QM_REG_QVOQIDX_17 0x168138
2638 #define QM_REG_QVOQIDX_21 0x168148
2639 #define QM_REG_QVOQIDX_22 0x16814c
2640 #define QM_REG_QVOQIDX_23 0x168150
2641 #define QM_REG_QVOQIDX_24 0x168154
2642 #define QM_REG_QVOQIDX_25 0x168158
2643 #define QM_REG_QVOQIDX_26 0x16815c
2644 #define QM_REG_QVOQIDX_27 0x168160
2645 #define QM_REG_QVOQIDX_28 0x168164
2646 #define QM_REG_QVOQIDX_29 0x168168
2647 #define QM_REG_QVOQIDX_30 0x16816c
2648 #define QM_REG_QVOQIDX_31 0x168170
2649 #define QM_REG_QVOQIDX_32 0x168174
2650 #define QM_REG_QVOQIDX_33 0x168178
2651 #define QM_REG_QVOQIDX_34 0x16817c
2652 #define QM_REG_QVOQIDX_35 0x168180
2653 #define QM_REG_QVOQIDX_36 0x168184
2654 #define QM_REG_QVOQIDX_37 0x168188
2655 #define QM_REG_QVOQIDX_38 0x16818c
2656 #define QM_REG_QVOQIDX_39 0x168190
2657 #define QM_REG_QVOQIDX_40 0x168194
2658 #define QM_REG_QVOQIDX_41 0x168198
2659 #define QM_REG_QVOQIDX_42 0x16819c
2660 #define QM_REG_QVOQIDX_43 0x1681a0
2661 #define QM_REG_QVOQIDX_44 0x1681a4
2662 #define QM_REG_QVOQIDX_45 0x1681a8
2663 #define QM_REG_QVOQIDX_46 0x1681ac
2664 #define QM_REG_QVOQIDX_47 0x1681b0
2665 #define QM_REG_QVOQIDX_48 0x1681b4
2666 #define QM_REG_QVOQIDX_49 0x1681b8
2667 #define QM_REG_QVOQIDX_5 0x168108
2668 #define QM_REG_QVOQIDX_50 0x1681bc
2669 #define QM_REG_QVOQIDX_51 0x1681c0
2670 #define QM_REG_QVOQIDX_52 0x1681c4
2671 #define QM_REG_QVOQIDX_53 0x1681c8
2672 #define QM_REG_QVOQIDX_54 0x1681cc
2673 #define QM_REG_QVOQIDX_55 0x1681d0
2674 #define QM_REG_QVOQIDX_56 0x1681d4
2675 #define QM_REG_QVOQIDX_57 0x1681d8
2676 #define QM_REG_QVOQIDX_58 0x1681dc
2677 #define QM_REG_QVOQIDX_59 0x1681e0
2678 #define QM_REG_QVOQIDX_6 0x16810c
2679 #define QM_REG_QVOQIDX_60 0x1681e4
2680 #define QM_REG_QVOQIDX_61 0x1681e8
2681 #define QM_REG_QVOQIDX_62 0x1681ec
2682 #define QM_REG_QVOQIDX_63 0x1681f0
2683 #define QM_REG_QVOQIDX_64 0x16e40c
2684 #define QM_REG_QVOQIDX_65 0x16e410
2685 #define QM_REG_QVOQIDX_69 0x16e420
2686 #define QM_REG_QVOQIDX_7 0x168110
2687 #define QM_REG_QVOQIDX_70 0x16e424
2688 #define QM_REG_QVOQIDX_71 0x16e428
2689 #define QM_REG_QVOQIDX_72 0x16e42c
2690 #define QM_REG_QVOQIDX_73 0x16e430
2691 #define QM_REG_QVOQIDX_74 0x16e434
2692 #define QM_REG_QVOQIDX_75 0x16e438
2693 #define QM_REG_QVOQIDX_76 0x16e43c
2694 #define QM_REG_QVOQIDX_77 0x16e440
2695 #define QM_REG_QVOQIDX_78 0x16e444
2696 #define QM_REG_QVOQIDX_79 0x16e448
2697 #define QM_REG_QVOQIDX_8 0x168114
2698 #define QM_REG_QVOQIDX_80 0x16e44c
2699 #define QM_REG_QVOQIDX_81 0x16e450
2700 #define QM_REG_QVOQIDX_85 0x16e460
2701 #define QM_REG_QVOQIDX_86 0x16e464
2702 #define QM_REG_QVOQIDX_87 0x16e468
2703 #define QM_REG_QVOQIDX_88 0x16e46c
2704 #define QM_REG_QVOQIDX_89 0x16e470
2705 #define QM_REG_QVOQIDX_9 0x168118
2706 #define QM_REG_QVOQIDX_90 0x16e474
2707 #define QM_REG_QVOQIDX_91 0x16e478
2708 #define QM_REG_QVOQIDX_92 0x16e47c
2709 #define QM_REG_QVOQIDX_93 0x16e480
2710 #define QM_REG_QVOQIDX_94 0x16e484
2711 #define QM_REG_QVOQIDX_95 0x16e488
2712 #define QM_REG_QVOQIDX_96 0x16e48c
2713 #define QM_REG_QVOQIDX_97 0x16e490
2714 #define QM_REG_QVOQIDX_98 0x16e494
2715 #define QM_REG_QVOQIDX_99 0x16e498
2716 /* [RW 1] Initialization bit command */
2717 #define QM_REG_SOFT_RESET 0x168428
2718 /* [RW 8] The credit cost per every task in the QM. A value per each VOQ */
2719 #define QM_REG_TASKCRDCOST_0 0x16809c
2720 #define QM_REG_TASKCRDCOST_1 0x1680a0
2721 #define QM_REG_TASKCRDCOST_2 0x1680a4
2722 #define QM_REG_TASKCRDCOST_4 0x1680ac
2723 #define QM_REG_TASKCRDCOST_5 0x1680b0
2724 /* [R 6] Keep the fill level of the fifo from write client 3 */
2725 #define QM_REG_TQM_WRC_FIFOLVL 0x168010
2726 /* [R 6] Keep the fill level of the fifo from write client 2 */
2727 #define QM_REG_UQM_WRC_FIFOLVL 0x168008
2728 /* [RC 32] Credit update error register */
2729 #define QM_REG_VOQCRDERRREG 0x168408
2730 /* [R 16] The credit value for each VOQ */
2731 #define QM_REG_VOQCREDIT_0 0x1682d0
2732 #define QM_REG_VOQCREDIT_1 0x1682d4
2733 #define QM_REG_VOQCREDIT_4 0x1682e0
2734 /* [RW 16] The credit value that if above the QM is considered almost full */
2735 #define QM_REG_VOQCREDITAFULLTHR 0x168090
2736 /* [RW 16] The init and maximum credit for each VoQ */
2737 #define QM_REG_VOQINITCREDIT_0 0x168060
2738 #define QM_REG_VOQINITCREDIT_1 0x168064
2739 #define QM_REG_VOQINITCREDIT_2 0x168068
2740 #define QM_REG_VOQINITCREDIT_4 0x168070
2741 #define QM_REG_VOQINITCREDIT_5 0x168074
2742 /* [RW 1] The port of which VOQ belongs */
2743 #define QM_REG_VOQPORT_0 0x1682a0
2744 #define QM_REG_VOQPORT_1 0x1682a4
2745 #define QM_REG_VOQPORT_2 0x1682a8
2746 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
2747 #define QM_REG_VOQQMASK_0_LSB 0x168240
2748 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
2749 #define QM_REG_VOQQMASK_0_LSB_EXT_A 0x16e524
2750 /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
2751 #define QM_REG_VOQQMASK_0_MSB 0x168244
2752 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
2753 #define QM_REG_VOQQMASK_0_MSB_EXT_A 0x16e528
2754 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
2755 #define QM_REG_VOQQMASK_10_LSB 0x168290
2756 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
2757 #define QM_REG_VOQQMASK_10_LSB_EXT_A 0x16e574
2758 /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
2759 #define QM_REG_VOQQMASK_10_MSB 0x168294
2760 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
2761 #define QM_REG_VOQQMASK_10_MSB_EXT_A 0x16e578
2762 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
2763 #define QM_REG_VOQQMASK_11_LSB 0x168298
2764 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
2765 #define QM_REG_VOQQMASK_11_LSB_EXT_A 0x16e57c
2766 /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
2767 #define QM_REG_VOQQMASK_11_MSB 0x16829c
2768 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
2769 #define QM_REG_VOQQMASK_11_MSB_EXT_A 0x16e580
2770 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
2771 #define QM_REG_VOQQMASK_1_LSB 0x168248
2772 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
2773 #define QM_REG_VOQQMASK_1_LSB_EXT_A 0x16e52c
2774 /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
2775 #define QM_REG_VOQQMASK_1_MSB 0x16824c
2776 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
2777 #define QM_REG_VOQQMASK_1_MSB_EXT_A 0x16e530
2778 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
2779 #define QM_REG_VOQQMASK_2_LSB 0x168250
2780 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
2781 #define QM_REG_VOQQMASK_2_LSB_EXT_A 0x16e534
2782 /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
2783 #define QM_REG_VOQQMASK_2_MSB 0x168254
2784 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
2785 #define QM_REG_VOQQMASK_2_MSB_EXT_A 0x16e538
2786 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
2787 #define QM_REG_VOQQMASK_3_LSB 0x168258
2788 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
2789 #define QM_REG_VOQQMASK_3_LSB_EXT_A 0x16e53c
2790 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
2791 #define QM_REG_VOQQMASK_3_MSB_EXT_A 0x16e540
2792 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
2793 #define QM_REG_VOQQMASK_4_LSB 0x168260
2794 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
2795 #define QM_REG_VOQQMASK_4_LSB_EXT_A 0x16e544
2796 /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
2797 #define QM_REG_VOQQMASK_4_MSB 0x168264
2798 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
2799 #define QM_REG_VOQQMASK_4_MSB_EXT_A 0x16e548
2800 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
2801 #define QM_REG_VOQQMASK_5_LSB 0x168268
2802 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
2803 #define QM_REG_VOQQMASK_5_LSB_EXT_A 0x16e54c
2804 /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
2805 #define QM_REG_VOQQMASK_5_MSB 0x16826c
2806 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
2807 #define QM_REG_VOQQMASK_5_MSB_EXT_A 0x16e550
2808 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
2809 #define QM_REG_VOQQMASK_6_LSB 0x168270
2810 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
2811 #define QM_REG_VOQQMASK_6_LSB_EXT_A 0x16e554
2812 /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
2813 #define QM_REG_VOQQMASK_6_MSB 0x168274
2814 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
2815 #define QM_REG_VOQQMASK_6_MSB_EXT_A 0x16e558
2816 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
2817 #define QM_REG_VOQQMASK_7_LSB 0x168278
2818 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
2819 #define QM_REG_VOQQMASK_7_LSB_EXT_A 0x16e55c
2820 /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
2821 #define QM_REG_VOQQMASK_7_MSB 0x16827c
2822 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
2823 #define QM_REG_VOQQMASK_7_MSB_EXT_A 0x16e560
2824 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
2825 #define QM_REG_VOQQMASK_8_LSB 0x168280
2826 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
2827 #define QM_REG_VOQQMASK_8_LSB_EXT_A 0x16e564
2828 /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
2829 #define QM_REG_VOQQMASK_8_MSB 0x168284
2830 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
2831 #define QM_REG_VOQQMASK_8_MSB_EXT_A 0x16e568
2832 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
2833 #define QM_REG_VOQQMASK_9_LSB 0x168288
2834 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
2835 #define QM_REG_VOQQMASK_9_LSB_EXT_A 0x16e56c
2836 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
2837 #define QM_REG_VOQQMASK_9_MSB_EXT_A 0x16e570
2838 /* [RW 32] Wrr weights */
2839 #define QM_REG_WRRWEIGHTS_0 0x16880c
2840 #define QM_REG_WRRWEIGHTS_1 0x168810
2841 #define QM_REG_WRRWEIGHTS_10 0x168814
2842 #define QM_REG_WRRWEIGHTS_11 0x168818
2843 #define QM_REG_WRRWEIGHTS_12 0x16881c
2844 #define QM_REG_WRRWEIGHTS_13 0x168820
2845 #define QM_REG_WRRWEIGHTS_14 0x168824
2846 #define QM_REG_WRRWEIGHTS_15 0x168828
2847 #define QM_REG_WRRWEIGHTS_16 0x16e000
2848 #define QM_REG_WRRWEIGHTS_17 0x16e004
2849 #define QM_REG_WRRWEIGHTS_18 0x16e008
2850 #define QM_REG_WRRWEIGHTS_19 0x16e00c
2851 #define QM_REG_WRRWEIGHTS_2 0x16882c
2852 #define QM_REG_WRRWEIGHTS_20 0x16e010
2853 #define QM_REG_WRRWEIGHTS_21 0x16e014
2854 #define QM_REG_WRRWEIGHTS_22 0x16e018
2855 #define QM_REG_WRRWEIGHTS_23 0x16e01c
2856 #define QM_REG_WRRWEIGHTS_24 0x16e020
2857 #define QM_REG_WRRWEIGHTS_25 0x16e024
2858 #define QM_REG_WRRWEIGHTS_26 0x16e028
2859 #define QM_REG_WRRWEIGHTS_27 0x16e02c
2860 #define QM_REG_WRRWEIGHTS_28 0x16e030
2861 #define QM_REG_WRRWEIGHTS_29 0x16e034
2862 #define QM_REG_WRRWEIGHTS_3 0x168830
2863 #define QM_REG_WRRWEIGHTS_30 0x16e038
2864 #define QM_REG_WRRWEIGHTS_31 0x16e03c
2865 #define QM_REG_WRRWEIGHTS_4 0x168834
2866 #define QM_REG_WRRWEIGHTS_5 0x168838
2867 #define QM_REG_WRRWEIGHTS_6 0x16883c
2868 #define QM_REG_WRRWEIGHTS_7 0x168840
2869 #define QM_REG_WRRWEIGHTS_8 0x168844
2870 #define QM_REG_WRRWEIGHTS_9 0x168848
2871 /* [R 6] Keep the fill level of the fifo from write client 1 */
2872 #define QM_REG_XQM_WRC_FIFOLVL 0x168000
2873 #define SRC_REG_COUNTFREE0 0x40500
2874 /* [RW 1] If clr the searcher is compatible to E1 A0 - support only two
2875 ports. If set the searcher support 8 functions. */
2876 #define SRC_REG_E1HMF_ENABLE 0x404cc
2877 #define SRC_REG_FIRSTFREE0 0x40510
2878 #define SRC_REG_KEYRSS0_0 0x40408
2879 #define SRC_REG_KEYRSS0_7 0x40424
2880 #define SRC_REG_KEYRSS1_9 0x40454
2881 #define SRC_REG_KEYSEARCH_0 0x40458
2882 #define SRC_REG_KEYSEARCH_1 0x4045c
2883 #define SRC_REG_KEYSEARCH_2 0x40460
2884 #define SRC_REG_KEYSEARCH_3 0x40464
2885 #define SRC_REG_KEYSEARCH_4 0x40468
2886 #define SRC_REG_KEYSEARCH_5 0x4046c
2887 #define SRC_REG_KEYSEARCH_6 0x40470
2888 #define SRC_REG_KEYSEARCH_7 0x40474
2889 #define SRC_REG_KEYSEARCH_8 0x40478
2890 #define SRC_REG_KEYSEARCH_9 0x4047c
2891 #define SRC_REG_LASTFREE0 0x40530
2892 #define SRC_REG_NUMBER_HASH_BITS0 0x40400
2893 /* [RW 1] Reset internal state machines. */
2894 #define SRC_REG_SOFT_RST 0x4049c
2895 /* [R 3] Interrupt register #0 read */
2896 #define SRC_REG_SRC_INT_STS 0x404ac
2897 /* [RW 3] Parity mask register #0 read/write */
2898 #define SRC_REG_SRC_PRTY_MASK 0x404c8
2899 /* [R 3] Parity register #0 read */
2900 #define SRC_REG_SRC_PRTY_STS 0x404bc
2901 /* [R 4] Used to read the value of the XX protection CAM occupancy counter. */
2902 #define TCM_REG_CAM_OCCUP 0x5017c
2903 /* [RW 1] CDU AG read Interface enable. If 0 - the request input is
2904 disregarded; valid output is deasserted; all other signals are treated as
2905 usual; if 1 - normal activity. */
2906 #define TCM_REG_CDU_AG_RD_IFEN 0x50034
2907 /* [RW 1] CDU AG write Interface enable. If 0 - the request and valid input
2908 are disregarded; all other signals are treated as usual; if 1 - normal
2910 #define TCM_REG_CDU_AG_WR_IFEN 0x50030
2911 /* [RW 1] CDU STORM read Interface enable. If 0 - the request input is
2912 disregarded; valid output is deasserted; all other signals are treated as
2913 usual; if 1 - normal activity. */
2914 #define TCM_REG_CDU_SM_RD_IFEN 0x5003c
2915 /* [RW 1] CDU STORM write Interface enable. If 0 - the request and valid
2916 input is disregarded; all other signals are treated as usual; if 1 -
2918 #define TCM_REG_CDU_SM_WR_IFEN 0x50038
2919 /* [RW 4] CFC output initial credit. Max credit available - 15.Write writes
2920 the initial credit value; read returns the current value of the credit
2921 counter. Must be initialized to 1 at start-up. */
2922 #define TCM_REG_CFC_INIT_CRD 0x50204
2923 /* [RW 3] The weight of the CP input in the WRR mechanism. 0 stands for
2924 weight 8 (the most prioritised); 1 stands for weight 1(least
2925 prioritised); 2 stands for weight 2; tc. */
2926 #define TCM_REG_CP_WEIGHT 0x500c0
2927 /* [RW 1] Input csem Interface enable. If 0 - the valid input is
2928 disregarded; acknowledge output is deasserted; all other signals are
2929 treated as usual; if 1 - normal activity. */
2930 #define TCM_REG_CSEM_IFEN 0x5002c
2931 /* [RC 1] Message length mismatch (relative to last indication) at the In#9
2933 #define TCM_REG_CSEM_LENGTH_MIS 0x50174
2934 /* [RW 3] The weight of the input csem in the WRR mechanism. 0 stands for
2935 weight 8 (the most prioritised); 1 stands for weight 1(least
2936 prioritised); 2 stands for weight 2; tc. */
2937 #define TCM_REG_CSEM_WEIGHT 0x500bc
2938 /* [RW 8] The Event ID in case of ErrorFlg is set in the input message. */
2939 #define TCM_REG_ERR_EVNT_ID 0x500a0
2940 /* [RW 28] The CM erroneous header for QM and Timers formatting. */
2941 #define TCM_REG_ERR_TCM_HDR 0x5009c
2942 /* [RW 8] The Event ID for Timers expiration. */
2943 #define TCM_REG_EXPR_EVNT_ID 0x500a4
2944 /* [RW 8] FIC0 output initial credit. Max credit available - 255.Write
2945 writes the initial credit value; read returns the current value of the
2946 credit counter. Must be initialized to 64 at start-up. */
2947 #define TCM_REG_FIC0_INIT_CRD 0x5020c
2948 /* [RW 8] FIC1 output initial credit. Max credit available - 255.Write
2949 writes the initial credit value; read returns the current value of the
2950 credit counter. Must be initialized to 64 at start-up. */
2951 #define TCM_REG_FIC1_INIT_CRD 0x50210
2952 /* [RW 1] Arbitration between Input Arbiter groups: 0 - fair Round-Robin; 1
2953 - strict priority defined by ~tcm_registers_gr_ag_pr.gr_ag_pr;
2954 ~tcm_registers_gr_ld0_pr.gr_ld0_pr and
2955 ~tcm_registers_gr_ld1_pr.gr_ld1_pr. */
2956 #define TCM_REG_GR_ARB_TYPE 0x50114
2957 /* [RW 2] Load (FIC0) channel group priority. The lowest priority is 0; the
2958 highest priority is 3. It is supposed that the Store channel is the
2959 compliment of the other 3 groups. */
2960 #define TCM_REG_GR_LD0_PR 0x5011c
2961 /* [RW 2] Load (FIC1) channel group priority. The lowest priority is 0; the
2962 highest priority is 3. It is supposed that the Store channel is the
2963 compliment of the other 3 groups. */
2964 #define TCM_REG_GR_LD1_PR 0x50120
2965 /* [RW 4] The number of double REG-pairs; loaded from the STORM context and
2966 sent to STORM; for a specific connection type. The double REG-pairs are
2967 used to align to STORM context row size of 128 bits. The offset of these
2968 data in the STORM context is always 0. Index _i stands for the connection
2969 type (one of 16). */
2970 #define TCM_REG_N_SM_CTX_LD_0 0x50050
2971 #define TCM_REG_N_SM_CTX_LD_1 0x50054
2972 #define TCM_REG_N_SM_CTX_LD_2 0x50058
2973 #define TCM_REG_N_SM_CTX_LD_3 0x5005c
2974 #define TCM_REG_N_SM_CTX_LD_4 0x50060
2975 #define TCM_REG_N_SM_CTX_LD_5 0x50064
2976 /* [RW 1] Input pbf Interface enable. If 0 - the valid input is disregarded;
2977 acknowledge output is deasserted; all other signals are treated as usual;
2978 if 1 - normal activity. */
2979 #define TCM_REG_PBF_IFEN 0x50024
2980 /* [RC 1] Message length mismatch (relative to last indication) at the In#7
2982 #define TCM_REG_PBF_LENGTH_MIS 0x5016c
2983 /* [RW 3] The weight of the input pbf in the WRR mechanism. 0 stands for
2984 weight 8 (the most prioritised); 1 stands for weight 1(least
2985 prioritised); 2 stands for weight 2; tc. */
2986 #define TCM_REG_PBF_WEIGHT 0x500b4
2987 #define TCM_REG_PHYS_QNUM0_0 0x500e0
2988 #define TCM_REG_PHYS_QNUM0_1 0x500e4
2989 #define TCM_REG_PHYS_QNUM1_0 0x500e8
2990 #define TCM_REG_PHYS_QNUM1_1 0x500ec
2991 #define TCM_REG_PHYS_QNUM2_0 0x500f0
2992 #define TCM_REG_PHYS_QNUM2_1 0x500f4
2993 #define TCM_REG_PHYS_QNUM3_0 0x500f8
2994 #define TCM_REG_PHYS_QNUM3_1 0x500fc
2995 /* [RW 1] Input prs Interface enable. If 0 - the valid input is disregarded;
2996 acknowledge output is deasserted; all other signals are treated as usual;
2997 if 1 - normal activity. */
2998 #define TCM_REG_PRS_IFEN 0x50020
2999 /* [RC 1] Message length mismatch (relative to last indication) at the In#6
3001 #define TCM_REG_PRS_LENGTH_MIS 0x50168
3002 /* [RW 3] The weight of the input prs in the WRR mechanism. 0 stands for
3003 weight 8 (the most prioritised); 1 stands for weight 1(least
3004 prioritised); 2 stands for weight 2; tc. */
3005 #define TCM_REG_PRS_WEIGHT 0x500b0
3006 /* [RW 8] The Event ID for Timers formatting in case of stop done. */
3007 #define TCM_REG_STOP_EVNT_ID 0x500a8
3008 /* [RC 1] Message length mismatch (relative to last indication) at the STORM
3010 #define TCM_REG_STORM_LENGTH_MIS 0x50160
3011 /* [RW 1] STORM - CM Interface enable. If 0 - the valid input is
3012 disregarded; acknowledge output is deasserted; all other signals are
3013 treated as usual; if 1 - normal activity. */
3014 #define TCM_REG_STORM_TCM_IFEN 0x50010
3015 /* [RW 3] The weight of the STORM input in the WRR mechanism. 0 stands for
3016 weight 8 (the most prioritised); 1 stands for weight 1(least
3017 prioritised); 2 stands for weight 2; tc. */
3018 #define TCM_REG_STORM_WEIGHT 0x500ac
3019 /* [RW 1] CM - CFC Interface enable. If 0 - the valid input is disregarded;
3020 acknowledge output is deasserted; all other signals are treated as usual;
3021 if 1 - normal activity. */
3022 #define TCM_REG_TCM_CFC_IFEN 0x50040
3023 /* [RW 11] Interrupt mask register #0 read/write */
3024 #define TCM_REG_TCM_INT_MASK 0x501dc
3025 /* [R 11] Interrupt register #0 read */
3026 #define TCM_REG_TCM_INT_STS 0x501d0
3027 /* [R 27] Parity register #0 read */
3028 #define TCM_REG_TCM_PRTY_STS 0x501e0
3029 /* [RW 3] The size of AG context region 0 in REG-pairs. Designates the MS
3030 REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5).
3031 Is used to determine the number of the AG context REG-pairs written back;
3032 when the input message Reg1WbFlg isn't set. */
3033 #define TCM_REG_TCM_REG0_SZ 0x500d8
3034 /* [RW 1] CM - STORM 0 Interface enable. If 0 - the acknowledge input is
3035 disregarded; valid is deasserted; all other signals are treated as usual;
3036 if 1 - normal activity. */
3037 #define TCM_REG_TCM_STORM0_IFEN 0x50004
3038 /* [RW 1] CM - STORM 1 Interface enable. If 0 - the acknowledge input is
3039 disregarded; valid is deasserted; all other signals are treated as usual;
3040 if 1 - normal activity. */
3041 #define TCM_REG_TCM_STORM1_IFEN 0x50008
3042 /* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input is
3043 disregarded; valid is deasserted; all other signals are treated as usual;
3044 if 1 - normal activity. */
3045 #define TCM_REG_TCM_TQM_IFEN 0x5000c
3046 /* [RW 1] If set the Q index; received from the QM is inserted to event ID. */
3047 #define TCM_REG_TCM_TQM_USE_Q 0x500d4
3048 /* [RW 28] The CM header for Timers expiration command. */
3049 #define TCM_REG_TM_TCM_HDR 0x50098
3050 /* [RW 1] Timers - CM Interface enable. If 0 - the valid input is
3051 disregarded; acknowledge output is deasserted; all other signals are
3052 treated as usual; if 1 - normal activity. */
3053 #define TCM_REG_TM_TCM_IFEN 0x5001c
3054 /* [RW 3] The weight of the Timers input in the WRR mechanism. 0 stands for
3055 weight 8 (the most prioritised); 1 stands for weight 1(least
3056 prioritised); 2 stands for weight 2; tc. */
3057 #define TCM_REG_TM_WEIGHT 0x500d0
3058 /* [RW 6] QM output initial credit. Max credit available - 32.Write writes
3059 the initial credit value; read returns the current value of the credit
3060 counter. Must be initialized to 32 at start-up. */
3061 #define TCM_REG_TQM_INIT_CRD 0x5021c
3062 /* [RW 3] The weight of the QM (primary) input in the WRR mechanism. 0
3063 stands for weight 8 (the most prioritised); 1 stands for weight 1(least
3064 prioritised); 2 stands for weight 2; tc. */
3065 #define TCM_REG_TQM_P_WEIGHT 0x500c8
3066 /* [RW 3] The weight of the QM (secondary) input in the WRR mechanism. 0
3067 stands for weight 8 (the most prioritised); 1 stands for weight 1(least
3068 prioritised); 2 stands for weight 2; tc. */
3069 #define TCM_REG_TQM_S_WEIGHT 0x500cc
3070 /* [RW 28] The CM header value for QM request (primary). */
3071 #define TCM_REG_TQM_TCM_HDR_P 0x50090
3072 /* [RW 28] The CM header value for QM request (secondary). */
3073 #define TCM_REG_TQM_TCM_HDR_S 0x50094
3074 /* [RW 1] QM - CM Interface enable. If 0 - the valid input is disregarded;
3075 acknowledge output is deasserted; all other signals are treated as usual;
3076 if 1 - normal activity. */
3077 #define TCM_REG_TQM_TCM_IFEN 0x50014
3078 /* [RW 1] Input SDM Interface enable. If 0 - the valid input is disregarded;
3079 acknowledge output is deasserted; all other signals are treated as usual;
3080 if 1 - normal activity. */
3081 #define TCM_REG_TSDM_IFEN 0x50018
3082 /* [RC 1] Message length mismatch (relative to last indication) at the SDM
3084 #define TCM_REG_TSDM_LENGTH_MIS 0x50164
3085 /* [RW 3] The weight of the SDM input in the WRR mechanism. 0 stands for
3086 weight 8 (the most prioritised); 1 stands for weight 1(least
3087 prioritised); 2 stands for weight 2; tc. */
3088 #define TCM_REG_TSDM_WEIGHT 0x500c4
3089 /* [RW 1] Input usem Interface enable. If 0 - the valid input is
3090 disregarded; acknowledge output is deasserted; all other signals are
3091 treated as usual; if 1 - normal activity. */
3092 #define TCM_REG_USEM_IFEN 0x50028
3093 /* [RC 1] Message length mismatch (relative to last indication) at the In#8
3095 #define TCM_REG_USEM_LENGTH_MIS 0x50170
3096 /* [RW 3] The weight of the input usem in the WRR mechanism. 0 stands for
3097 weight 8 (the most prioritised); 1 stands for weight 1(least
3098 prioritised); 2 stands for weight 2; tc. */
3099 #define TCM_REG_USEM_WEIGHT 0x500b8
3100 /* [RW 21] Indirect access to the descriptor table of the XX protection
3101 mechanism. The fields are: [5:0] - length of the message; 15:6] - message
3102 pointer; 20:16] - next pointer. */
3103 #define TCM_REG_XX_DESCR_TABLE 0x50280
3104 #define TCM_REG_XX_DESCR_TABLE_SIZE 32
3105 /* [R 6] Use to read the value of XX protection Free counter. */
3106 #define TCM_REG_XX_FREE 0x50178
3107 /* [RW 6] Initial value for the credit counter; responsible for fulfilling
3108 of the Input Stage XX protection buffer by the XX protection pending
3109 messages. Max credit available - 127.Write writes the initial credit
3110 value; read returns the current value of the credit counter. Must be
3111 initialized to 19 at start-up. */
3112 #define TCM_REG_XX_INIT_CRD 0x50220
3113 /* [RW 6] Maximum link list size (messages locked) per connection in the XX
3115 #define TCM_REG_XX_MAX_LL_SZ 0x50044
3116 /* [RW 6] The maximum number of pending messages; which may be stored in XX
3117 protection. ~tcm_registers_xx_free.xx_free is read on read. */
3118 #define TCM_REG_XX_MSG_NUM 0x50224
3119 /* [RW 8] The Event ID; sent to the STORM in case of XX overflow. */
3120 #define TCM_REG_XX_OVFL_EVNT_ID 0x50048
3121 /* [RW 16] Indirect access to the XX table of the XX protection mechanism.
3122 The fields are:[4:0] - tail pointer; [10:5] - Link List size; 15:11] -
3124 #define TCM_REG_XX_TABLE 0x50240
3125 /* [RW 4] Load value for cfc ac credit cnt. */
3126 #define TM_REG_CFC_AC_CRDCNT_VAL 0x164208
3127 /* [RW 4] Load value for cfc cld credit cnt. */
3128 #define TM_REG_CFC_CLD_CRDCNT_VAL 0x164210
3129 /* [RW 8] Client0 context region. */
3130 #define TM_REG_CL0_CONT_REGION 0x164030
3131 /* [RW 8] Client1 context region. */
3132 #define TM_REG_CL1_CONT_REGION 0x164034
3133 /* [RW 8] Client2 context region. */
3134 #define TM_REG_CL2_CONT_REGION 0x164038
3135 /* [RW 2] Client in High priority client number. */
3136 #define TM_REG_CLIN_PRIOR0_CLIENT 0x164024
3137 /* [RW 4] Load value for clout0 cred cnt. */
3138 #define TM_REG_CLOUT_CRDCNT0_VAL 0x164220
3139 /* [RW 4] Load value for clout1 cred cnt. */
3140 #define TM_REG_CLOUT_CRDCNT1_VAL 0x164228
3141 /* [RW 4] Load value for clout2 cred cnt. */
3142 #define TM_REG_CLOUT_CRDCNT2_VAL 0x164230
3143 /* [RW 1] Enable client0 input. */
3144 #define TM_REG_EN_CL0_INPUT 0x164008
3145 /* [RW 1] Enable client1 input. */
3146 #define TM_REG_EN_CL1_INPUT 0x16400c
3147 /* [RW 1] Enable client2 input. */
3148 #define TM_REG_EN_CL2_INPUT 0x164010
3149 #define TM_REG_EN_LINEAR0_TIMER 0x164014
3150 /* [RW 1] Enable real time counter. */
3151 #define TM_REG_EN_REAL_TIME_CNT 0x1640d8
3152 /* [RW 1] Enable for Timers state machines. */
3153 #define TM_REG_EN_TIMERS 0x164000
3154 /* [RW 4] Load value for expiration credit cnt. CFC max number of
3155 outstanding load requests for timers (expiration) context loading. */
3156 #define TM_REG_EXP_CRDCNT_VAL 0x164238
3157 /* [RW 32] Linear0 logic address. */
3158 #define TM_REG_LIN0_LOGIC_ADDR 0x164240
3159 /* [RW 18] Linear0 Max active cid (in banks of 32 entries). */
3160 #define TM_REG_LIN0_MAX_ACTIVE_CID 0x164048
3161 /* [WB 64] Linear0 phy address. */
3162 #define TM_REG_LIN0_PHY_ADDR 0x164270
3163 /* [RW 1] Linear0 physical address valid. */
3164 #define TM_REG_LIN0_PHY_ADDR_VALID 0x164248
3165 #define TM_REG_LIN0_SCAN_ON 0x1640d0
3166 /* [RW 24] Linear0 array scan timeout. */
3167 #define TM_REG_LIN0_SCAN_TIME 0x16403c
3168 /* [RW 32] Linear1 logic address. */
3169 #define TM_REG_LIN1_LOGIC_ADDR 0x164250
3170 /* [WB 64] Linear1 phy address. */
3171 #define TM_REG_LIN1_PHY_ADDR 0x164280
3172 /* [RW 1] Linear1 physical address valid. */
3173 #define TM_REG_LIN1_PHY_ADDR_VALID 0x164258
3174 /* [RW 6] Linear timer set_clear fifo threshold. */
3175 #define TM_REG_LIN_SETCLR_FIFO_ALFULL_THR 0x164070
3176 /* [RW 2] Load value for pci arbiter credit cnt. */
3177 #define TM_REG_PCIARB_CRDCNT_VAL 0x164260
3178 /* [RW 20] The amount of hardware cycles for each timer tick. */
3179 #define TM_REG_TIMER_TICK_SIZE 0x16401c
3180 /* [RW 8] Timers Context region. */
3181 #define TM_REG_TM_CONTEXT_REGION 0x164044
3182 /* [RW 1] Interrupt mask register #0 read/write */
3183 #define TM_REG_TM_INT_MASK 0x1640fc
3184 /* [R 1] Interrupt register #0 read */
3185 #define TM_REG_TM_INT_STS 0x1640f0
3186 /* [RW 8] The event id for aggregated interrupt 0 */
3187 #define TSDM_REG_AGG_INT_EVENT_0 0x42038
3188 #define TSDM_REG_AGG_INT_EVENT_1 0x4203c
3189 #define TSDM_REG_AGG_INT_EVENT_2 0x42040
3190 #define TSDM_REG_AGG_INT_EVENT_3 0x42044
3191 #define TSDM_REG_AGG_INT_EVENT_4 0x42048
3192 /* [RW 1] The T bit for aggregated interrupt 0 */
3193 #define TSDM_REG_AGG_INT_T_0 0x420b8
3194 #define TSDM_REG_AGG_INT_T_1 0x420bc
3195 /* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */
3196 #define TSDM_REG_CFC_RSP_START_ADDR 0x42008
3197 /* [RW 16] The maximum value of the competion counter #0 */
3198 #define TSDM_REG_CMP_COUNTER_MAX0 0x4201c
3199 /* [RW 16] The maximum value of the competion counter #1 */
3200 #define TSDM_REG_CMP_COUNTER_MAX1 0x42020
3201 /* [RW 16] The maximum value of the competion counter #2 */
3202 #define TSDM_REG_CMP_COUNTER_MAX2 0x42024
3203 /* [RW 16] The maximum value of the competion counter #3 */
3204 #define TSDM_REG_CMP_COUNTER_MAX3 0x42028
3205 /* [RW 13] The start address in the internal RAM for the completion
3207 #define TSDM_REG_CMP_COUNTER_START_ADDR 0x4200c
3208 #define TSDM_REG_ENABLE_IN1 0x42238
3209 #define TSDM_REG_ENABLE_IN2 0x4223c
3210 #define TSDM_REG_ENABLE_OUT1 0x42240
3211 #define TSDM_REG_ENABLE_OUT2 0x42244
3212 /* [RW 4] The initial number of messages that can be sent to the pxp control
3213 interface without receiving any ACK. */
3214 #define TSDM_REG_INIT_CREDIT_PXP_CTRL 0x424bc
3215 /* [ST 32] The number of ACK after placement messages received */
3216 #define TSDM_REG_NUM_OF_ACK_AFTER_PLACE 0x4227c
3217 /* [ST 32] The number of packet end messages received from the parser */
3218 #define TSDM_REG_NUM_OF_PKT_END_MSG 0x42274
3219 /* [ST 32] The number of requests received from the pxp async if */
3220 #define TSDM_REG_NUM_OF_PXP_ASYNC_REQ 0x42278
3221 /* [ST 32] The number of commands received in queue 0 */
3222 #define TSDM_REG_NUM_OF_Q0_CMD 0x42248
3223 /* [ST 32] The number of commands received in queue 10 */
3224 #define TSDM_REG_NUM_OF_Q10_CMD 0x4226c
3225 /* [ST 32] The number of commands received in queue 11 */
3226 #define TSDM_REG_NUM_OF_Q11_CMD 0x42270
3227 /* [ST 32] The number of commands received in queue 1 */
3228 #define TSDM_REG_NUM_OF_Q1_CMD 0x4224c
3229 /* [ST 32] The number of commands received in queue 3 */
3230 #define TSDM_REG_NUM_OF_Q3_CMD 0x42250
3231 /* [ST 32] The number of commands received in queue 4 */
3232 #define TSDM_REG_NUM_OF_Q4_CMD 0x42254
3233 /* [ST 32] The number of commands received in queue 5 */
3234 #define TSDM_REG_NUM_OF_Q5_CMD 0x42258
3235 /* [ST 32] The number of commands received in queue 6 */
3236 #define TSDM_REG_NUM_OF_Q6_CMD 0x4225c
3237 /* [ST 32] The number of commands received in queue 7 */
3238 #define TSDM_REG_NUM_OF_Q7_CMD 0x42260
3239 /* [ST 32] The number of commands received in queue 8 */
3240 #define TSDM_REG_NUM_OF_Q8_CMD 0x42264
3241 /* [ST 32] The number of commands received in queue 9 */
3242 #define TSDM_REG_NUM_OF_Q9_CMD 0x42268
3243 /* [RW 13] The start address in the internal RAM for the packet end message */
3244 #define TSDM_REG_PCK_END_MSG_START_ADDR 0x42014
3245 /* [RW 13] The start address in the internal RAM for queue counters */
3246 #define TSDM_REG_Q_COUNTER_START_ADDR 0x42010
3247 /* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */
3248 #define TSDM_REG_RSP_PXP_CTRL_RDATA_EMPTY 0x42548
3249 /* [R 1] parser fifo empty in sdm_sync block */
3250 #define TSDM_REG_SYNC_PARSER_EMPTY 0x42550
3251 /* [R 1] parser serial fifo empty in sdm_sync block */
3252 #define TSDM_REG_SYNC_SYNC_EMPTY 0x42558
3253 /* [RW 32] Tick for timer counter. Applicable only when
3254 ~tsdm_registers_timer_tick_enable.timer_tick_enable =1 */
3255 #define TSDM_REG_TIMER_TICK 0x42000
3256 /* [RW 32] Interrupt mask register #0 read/write */
3257 #define TSDM_REG_TSDM_INT_MASK_0 0x4229c
3258 #define TSDM_REG_TSDM_INT_MASK_1 0x422ac
3259 /* [R 32] Interrupt register #0 read */
3260 #define TSDM_REG_TSDM_INT_STS_0 0x42290
3261 #define TSDM_REG_TSDM_INT_STS_1 0x422a0
3262 /* [RW 11] Parity mask register #0 read/write */
3263 #define TSDM_REG_TSDM_PRTY_MASK 0x422bc
3264 /* [R 11] Parity register #0 read */
3265 #define TSDM_REG_TSDM_PRTY_STS 0x422b0
3266 /* [RW 5] The number of time_slots in the arbitration cycle */
3267 #define TSEM_REG_ARB_CYCLE_SIZE 0x180034
3268 /* [RW 3] The source that is associated with arbitration element 0. Source
3269 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
3270 sleeping thread with priority 1; 4- sleeping thread with priority 2 */
3271 #define TSEM_REG_ARB_ELEMENT0 0x180020
3272 /* [RW 3] The source that is associated with arbitration element 1. Source
3273 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
3274 sleeping thread with priority 1; 4- sleeping thread with priority 2.
3275 Could not be equal to register ~tsem_registers_arb_element0.arb_element0 */
3276 #define TSEM_REG_ARB_ELEMENT1 0x180024
3277 /* [RW 3] The source that is associated with arbitration element 2. Source
3278 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
3279 sleeping thread with priority 1; 4- sleeping thread with priority 2.
3280 Could not be equal to register ~tsem_registers_arb_element0.arb_element0
3281 and ~tsem_registers_arb_element1.arb_element1 */
3282 #define TSEM_REG_ARB_ELEMENT2 0x180028
3283 /* [RW 3] The source that is associated with arbitration element 3. Source
3284 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
3285 sleeping thread with priority 1; 4- sleeping thread with priority 2.Could
3286 not be equal to register ~tsem_registers_arb_element0.arb_element0 and
3287 ~tsem_registers_arb_element1.arb_element1 and
3288 ~tsem_registers_arb_element2.arb_element2 */
3289 #define TSEM_REG_ARB_ELEMENT3 0x18002c
3290 /* [RW 3] The source that is associated with arbitration element 4. Source
3291 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
3292 sleeping thread with priority 1; 4- sleeping thread with priority 2.
3293 Could not be equal to register ~tsem_registers_arb_element0.arb_element0
3294 and ~tsem_registers_arb_element1.arb_element1 and
3295 ~tsem_registers_arb_element2.arb_element2 and
3296 ~tsem_registers_arb_element3.arb_element3 */
3297 #define TSEM_REG_ARB_ELEMENT4 0x180030
3298 #define TSEM_REG_ENABLE_IN 0x1800a4
3299 #define TSEM_REG_ENABLE_OUT 0x1800a8
3300 /* [RW 32] This address space contains all registers and memories that are
3301 placed in SEM_FAST block. The SEM_FAST registers are described in
3302 appendix B. In order to access the sem_fast registers the base address
3303 ~fast_memory.fast_memory should be added to eachsem_fast register offset. */
3304 #define TSEM_REG_FAST_MEMORY 0x1a0000
3305 /* [RW 1] Disables input messages from FIC0 May be updated during run_time
3307 #define TSEM_REG_FIC0_DISABLE 0x180224
3308 /* [RW 1] Disables input messages from FIC1 May be updated during run_time
3310 #define TSEM_REG_FIC1_DISABLE 0x180234
3311 /* [RW 15] Interrupt table Read and write access to it is not possible in
3312 the middle of the work */
3313 #define TSEM_REG_INT_TABLE 0x180400
3314 /* [ST 24] Statistics register. The number of messages that entered through
3316 #define TSEM_REG_MSG_NUM_FIC0 0x180000
3317 /* [ST 24] Statistics register. The number of messages that entered through
3319 #define TSEM_REG_MSG_NUM_FIC1 0x180004
3320 /* [ST 24] Statistics register. The number of messages that were sent to
3322 #define TSEM_REG_MSG_NUM_FOC0 0x180008
3323 /* [ST 24] Statistics register. The number of messages that were sent to
3325 #define TSEM_REG_MSG_NUM_FOC1 0x18000c
3326 /* [ST 24] Statistics register. The number of messages that were sent to
3328 #define TSEM_REG_MSG_NUM_FOC2 0x180010
3329 /* [ST 24] Statistics register. The number of messages that were sent to
3331 #define TSEM_REG_MSG_NUM_FOC3 0x180014
3332 /* [RW 1] Disables input messages from the passive buffer May be updated
3333 during run_time by the microcode */
3334 #define TSEM_REG_PAS_DISABLE 0x18024c
3335 /* [WB 128] Debug only. Passive buffer memory */
3336 #define TSEM_REG_PASSIVE_BUFFER 0x181000
3337 /* [WB 46] pram memory. B45 is parity; b[44:0] - data. */
3338 #define TSEM_REG_PRAM 0x1c0000
3339 /* [R 8] Valid sleeping threads indication have bit per thread */
3340 #define TSEM_REG_SLEEP_THREADS_VALID 0x18026c
3341 /* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */
3342 #define TSEM_REG_SLOW_EXT_STORE_EMPTY 0x1802a0
3343 /* [RW 8] List of free threads . There is a bit per thread. */
3344 #define TSEM_REG_THREADS_LIST 0x1802e4
3345 /* [RW 3] The arbitration scheme of time_slot 0 */
3346 #define TSEM_REG_TS_0_AS 0x180038
3347 /* [RW 3] The arbitration scheme of time_slot 10 */
3348 #define TSEM_REG_TS_10_AS 0x180060
3349 /* [RW 3] The arbitration scheme of time_slot 11 */
3350 #define TSEM_REG_TS_11_AS 0x180064
3351 /* [RW 3] The arbitration scheme of time_slot 12 */
3352 #define TSEM_REG_TS_12_AS 0x180068
3353 /* [RW 3] The arbitration scheme of time_slot 13 */
3354 #define TSEM_REG_TS_13_AS 0x18006c
3355 /* [RW 3] The arbitration scheme of time_slot 14 */
3356 #define TSEM_REG_TS_14_AS 0x180070
3357 /* [RW 3] The arbitration scheme of time_slot 15 */
3358 #define TSEM_REG_TS_15_AS 0x180074
3359 /* [RW 3] The arbitration scheme of time_slot 16 */
3360 #define TSEM_REG_TS_16_AS 0x180078
3361 /* [RW 3] The arbitration scheme of time_slot 17 */
3362 #define TSEM_REG_TS_17_AS 0x18007c
3363 /* [RW 3] The arbitration scheme of time_slot 18 */
3364 #define TSEM_REG_TS_18_AS 0x180080
3365 /* [RW 3] The arbitration scheme of time_slot 1 */
3366 #define TSEM_REG_TS_1_AS 0x18003c
3367 /* [RW 3] The arbitration scheme of time_slot 2 */
3368 #define TSEM_REG_TS_2_AS 0x180040
3369 /* [RW 3] The arbitration scheme of time_slot 3 */
3370 #define TSEM_REG_TS_3_AS 0x180044
3371 /* [RW 3] The arbitration scheme of time_slot 4 */
3372 #define TSEM_REG_TS_4_AS 0x180048
3373 /* [RW 3] The arbitration scheme of time_slot 5 */
3374 #define TSEM_REG_TS_5_AS 0x18004c
3375 /* [RW 3] The arbitration scheme of time_slot 6 */
3376 #define TSEM_REG_TS_6_AS 0x180050
3377 /* [RW 3] The arbitration scheme of time_slot 7 */
3378 #define TSEM_REG_TS_7_AS 0x180054
3379 /* [RW 3] The arbitration scheme of time_slot 8 */
3380 #define TSEM_REG_TS_8_AS 0x180058
3381 /* [RW 3] The arbitration scheme of time_slot 9 */
3382 #define TSEM_REG_TS_9_AS 0x18005c
3383 /* [RW 32] Interrupt mask register #0 read/write */
3384 #define TSEM_REG_TSEM_INT_MASK_0 0x180100
3385 #define TSEM_REG_TSEM_INT_MASK_1 0x180110
3386 /* [R 32] Interrupt register #0 read */
3387 #define TSEM_REG_TSEM_INT_STS_0 0x1800f4
3388 #define TSEM_REG_TSEM_INT_STS_1 0x180104
3389 /* [RW 32] Parity mask register #0 read/write */
3390 #define TSEM_REG_TSEM_PRTY_MASK_0 0x180120
3391 #define TSEM_REG_TSEM_PRTY_MASK_1 0x180130
3392 /* [R 32] Parity register #0 read */
3393 #define TSEM_REG_TSEM_PRTY_STS_0 0x180114
3394 #define TSEM_REG_TSEM_PRTY_STS_1 0x180124
3395 /* [R 5] Used to read the XX protection CAM occupancy counter. */
3396 #define UCM_REG_CAM_OCCUP 0xe0170
3397 /* [RW 1] CDU AG read Interface enable. If 0 - the request input is
3398 disregarded; valid output is deasserted; all other signals are treated as
3399 usual; if 1 - normal activity. */
3400 #define UCM_REG_CDU_AG_RD_IFEN 0xe0038
3401 /* [RW 1] CDU AG write Interface enable. If 0 - the request and valid input
3402 are disregarded; all other signals are treated as usual; if 1 - normal
3404 #define UCM_REG_CDU_AG_WR_IFEN 0xe0034
3405 /* [RW 1] CDU STORM read Interface enable. If 0 - the request input is
3406 disregarded; valid output is deasserted; all other signals are treated as
3407 usual; if 1 - normal activity. */
3408 #define UCM_REG_CDU_SM_RD_IFEN 0xe0040
3409 /* [RW 1] CDU STORM write Interface enable. If 0 - the request and valid
3410 input is disregarded; all other signals are treated as usual; if 1 -
3412 #define UCM_REG_CDU_SM_WR_IFEN 0xe003c
3413 /* [RW 4] CFC output initial credit. Max credit available - 15.Write writes
3414 the initial credit value; read returns the current value of the credit
3415 counter. Must be initialized to 1 at start-up. */
3416 #define UCM_REG_CFC_INIT_CRD 0xe0204
3417 /* [RW 3] The weight of the CP input in the WRR mechanism. 0 stands for
3418 weight 8 (the most prioritised); 1 stands for weight 1(least
3419 prioritised); 2 stands for weight 2; tc. */
3420 #define UCM_REG_CP_WEIGHT 0xe00c4
3421 /* [RW 1] Input csem Interface enable. If 0 - the valid input is
3422 disregarded; acknowledge output is deasserted; all other signals are
3423 treated as usual; if 1 - normal activity. */
3424 #define UCM_REG_CSEM_IFEN 0xe0028
3425 /* [RC 1] Set when the message length mismatch (relative to last indication)
3426 at the csem interface is detected. */
3427 #define UCM_REG_CSEM_LENGTH_MIS 0xe0160
3428 /* [RW 3] The weight of the input csem in the WRR mechanism. 0 stands for
3429 weight 8 (the most prioritised); 1 stands for weight 1(least
3430 prioritised); 2 stands for weight 2; tc. */
3431 #define UCM_REG_CSEM_WEIGHT 0xe00b8
3432 /* [RW 1] Input dorq Interface enable. If 0 - the valid input is
3433 disregarded; acknowledge output is deasserted; all other signals are
3434 treated as usual; if 1 - normal activity. */
3435 #define UCM_REG_DORQ_IFEN 0xe0030
3436 /* [RC 1] Set when the message length mismatch (relative to last indication)
3437 at the dorq interface is detected. */
3438 #define UCM_REG_DORQ_LENGTH_MIS 0xe0168
3439 /* [RW 3] The weight of the input dorq in the WRR mechanism. 0 stands for
3440 weight 8 (the most prioritised); 1 stands for weight 1(least
3441 prioritised); 2 stands for weight 2; tc. */
3442 #define UCM_REG_DORQ_WEIGHT 0xe00c0
3443 /* [RW 8] The Event ID in case ErrorFlg input message bit is set. */
3444 #define UCM_REG_ERR_EVNT_ID 0xe00a4
3445 /* [RW 28] The CM erroneous header for QM and Timers formatting. */
3446 #define UCM_REG_ERR_UCM_HDR 0xe00a0
3447 /* [RW 8] The Event ID for Timers expiration. */
3448 #define UCM_REG_EXPR_EVNT_ID 0xe00a8
3449 /* [RW 8] FIC0 output initial credit. Max credit available - 255.Write
3450 writes the initial credit value; read returns the current value of the
3451 credit counter. Must be initialized to 64 at start-up. */
3452 #define UCM_REG_FIC0_INIT_CRD 0xe020c
3453 /* [RW 8] FIC1 output initial credit. Max credit available - 255.Write
3454 writes the initial credit value; read returns the current value of the
3455 credit counter. Must be initialized to 64 at start-up. */
3456 #define UCM_REG_FIC1_INIT_CRD 0xe0210
3457 /* [RW 1] Arbitration between Input Arbiter groups: 0 - fair Round-Robin; 1
3458 - strict priority defined by ~ucm_registers_gr_ag_pr.gr_ag_pr;
3459 ~ucm_registers_gr_ld0_pr.gr_ld0_pr and
3460 ~ucm_registers_gr_ld1_pr.gr_ld1_pr. */
3461 #define UCM_REG_GR_ARB_TYPE 0xe0144
3462 /* [RW 2] Load (FIC0) channel group priority. The lowest priority is 0; the
3463 highest priority is 3. It is supposed that the Store channel group is
3464 compliment to the others. */
3465 #define UCM_REG_GR_LD0_PR 0xe014c
3466 /* [RW 2] Load (FIC1) channel group priority. The lowest priority is 0; the
3467 highest priority is 3. It is supposed that the Store channel group is
3468 compliment to the others. */
3469 #define UCM_REG_GR_LD1_PR 0xe0150
3470 /* [RW 2] The queue index for invalidate counter flag decision. */
3471 #define UCM_REG_INV_CFLG_Q 0xe00e4
3472 /* [RW 5] The number of double REG-pairs; loaded from the STORM context and
3473 sent to STORM; for a specific connection type. the double REG-pairs are
3474 used in order to align to STORM context row size of 128 bits. The offset
3475 of these data in the STORM context is always 0. Index _i stands for the
3476 connection type (one of 16). */
3477 #define UCM_REG_N_SM_CTX_LD_0 0xe0054
3478 #define UCM_REG_N_SM_CTX_LD_1 0xe0058
3479 #define UCM_REG_N_SM_CTX_LD_2 0xe005c
3480 #define UCM_REG_N_SM_CTX_LD_3 0xe0060
3481 #define UCM_REG_N_SM_CTX_LD_4 0xe0064
3482 #define UCM_REG_N_SM_CTX_LD_5 0xe0068
3483 #define UCM_REG_PHYS_QNUM0_0 0xe0110
3484 #define UCM_REG_PHYS_QNUM0_1 0xe0114
3485 #define UCM_REG_PHYS_QNUM1_0 0xe0118
3486 #define UCM_REG_PHYS_QNUM1_1 0xe011c
3487 #define UCM_REG_PHYS_QNUM2_0 0xe0120
3488 #define UCM_REG_PHYS_QNUM2_1 0xe0124
3489 #define UCM_REG_PHYS_QNUM3_0 0xe0128
3490 #define UCM_REG_PHYS_QNUM3_1 0xe012c
3491 /* [RW 8] The Event ID for Timers formatting in case of stop done. */
3492 #define UCM_REG_STOP_EVNT_ID 0xe00ac
3493 /* [RC 1] Set when the message length mismatch (relative to last indication)
3494 at the STORM interface is detected. */
3495 #define UCM_REG_STORM_LENGTH_MIS 0xe0154
3496 /* [RW 1] STORM - CM Interface enable. If 0 - the valid input is
3497 disregarded; acknowledge output is deasserted; all other signals are
3498 treated as usual; if 1 - normal activity. */
3499 #define UCM_REG_STORM_UCM_IFEN 0xe0010
3500 /* [RW 3] The weight of the STORM input in the WRR mechanism. 0 stands for
3501 weight 8 (the most prioritised); 1 stands for weight 1(least
3502 prioritised); 2 stands for weight 2; tc. */
3503 #define UCM_REG_STORM_WEIGHT 0xe00b0
3504 /* [RW 4] Timers output initial credit. Max credit available - 15.Write
3505 writes the initial credit value; read returns the current value of the
3506 credit counter. Must be initialized to 4 at start-up. */
3507 #define UCM_REG_TM_INIT_CRD 0xe021c
3508 /* [RW 28] The CM header for Timers expiration command. */
3509 #define UCM_REG_TM_UCM_HDR 0xe009c
3510 /* [RW 1] Timers - CM Interface enable. If 0 - the valid input is
3511 disregarded; acknowledge output is deasserted; all other signals are
3512 treated as usual; if 1 - normal activity. */
3513 #define UCM_REG_TM_UCM_IFEN 0xe001c
3514 /* [RW 3] The weight of the Timers input in the WRR mechanism. 0 stands for
3515 weight 8 (the most prioritised); 1 stands for weight 1(least
3516 prioritised); 2 stands for weight 2; tc. */
3517 #define UCM_REG_TM_WEIGHT 0xe00d4
3518 /* [RW 1] Input tsem Interface enable. If 0 - the valid input is
3519 disregarded; acknowledge output is deasserted; all other signals are
3520 treated as usual; if 1 - normal activity. */
3521 #define UCM_REG_TSEM_IFEN 0xe0024
3522 /* [RC 1] Set when the message length mismatch (relative to last indication)
3523 at the tsem interface is detected. */
3524 #define UCM_REG_TSEM_LENGTH_MIS 0xe015c
3525 /* [RW 3] The weight of the input tsem in the WRR mechanism. 0 stands for
3526 weight 8 (the most prioritised); 1 stands for weight 1(least
3527 prioritised); 2 stands for weight 2; tc. */
3528 #define UCM_REG_TSEM_WEIGHT 0xe00b4
3529 /* [RW 1] CM - CFC Interface enable. If 0 - the valid input is disregarded;
3530 acknowledge output is deasserted; all other signals are treated as usual;
3531 if 1 - normal activity. */
3532 #define UCM_REG_UCM_CFC_IFEN 0xe0044
3533 /* [RW 11] Interrupt mask register #0 read/write */
3534 #define UCM_REG_UCM_INT_MASK 0xe01d4
3535 /* [R 11] Interrupt register #0 read */
3536 #define UCM_REG_UCM_INT_STS 0xe01c8
3537 /* [R 27] Parity register #0 read */
3538 #define UCM_REG_UCM_PRTY_STS 0xe01d8
3539 /* [RW 2] The size of AG context region 0 in REG-pairs. Designates the MS
3540 REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5).
3541 Is used to determine the number of the AG context REG-pairs written back;
3542 when the Reg1WbFlg isn't set. */
3543 #define UCM_REG_UCM_REG0_SZ 0xe00dc
3544 /* [RW 1] CM - STORM 0 Interface enable. If 0 - the acknowledge input is
3545 disregarded; valid is deasserted; all other signals are treated as usual;
3546 if 1 - normal activity. */
3547 #define UCM_REG_UCM_STORM0_IFEN 0xe0004
3548 /* [RW 1] CM - STORM 1 Interface enable. If 0 - the acknowledge input is
3549 disregarded; valid is deasserted; all other signals are treated as usual;
3550 if 1 - normal activity. */
3551 #define UCM_REG_UCM_STORM1_IFEN 0xe0008
3552 /* [RW 1] CM - Timers Interface enable. If 0 - the valid input is
3553 disregarded; acknowledge output is deasserted; all other signals are
3554 treated as usual; if 1 - normal activity. */
3555 #define UCM_REG_UCM_TM_IFEN 0xe0020
3556 /* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input is
3557 disregarded; valid is deasserted; all other signals are treated as usual;
3558 if 1 - normal activity. */
3559 #define UCM_REG_UCM_UQM_IFEN 0xe000c
3560 /* [RW 1] If set the Q index; received from the QM is inserted to event ID. */
3561 #define UCM_REG_UCM_UQM_USE_Q 0xe00d8
3562 /* [RW 6] QM output initial credit. Max credit available - 32.Write writes
3563 the initial credit value; read returns the current value of the credit
3564 counter. Must be initialized to 32 at start-up. */
3565 #define UCM_REG_UQM_INIT_CRD 0xe0220
3566 /* [RW 3] The weight of the QM (primary) input in the WRR mechanism. 0
3567 stands for weight 8 (the most prioritised); 1 stands for weight 1(least
3568 prioritised); 2 stands for weight 2; tc. */
3569 #define UCM_REG_UQM_P_WEIGHT 0xe00cc
3570 /* [RW 3] The weight of the QM (secondary) input in the WRR mechanism. 0
3571 stands for weight 8 (the most prioritised); 1 stands for weight 1(least
3572 prioritised); 2 stands for weight 2; tc. */
3573 #define UCM_REG_UQM_S_WEIGHT 0xe00d0
3574 /* [RW 28] The CM header value for QM request (primary). */
3575 #define UCM_REG_UQM_UCM_HDR_P 0xe0094
3576 /* [RW 28] The CM header value for QM request (secondary). */
3577 #define UCM_REG_UQM_UCM_HDR_S 0xe0098
3578 /* [RW 1] QM - CM Interface enable. If 0 - the valid input is disregarded;
3579 acknowledge output is deasserted; all other signals are treated as usual;
3580 if 1 - normal activity. */
3581 #define UCM_REG_UQM_UCM_IFEN 0xe0014
3582 /* [RW 1] Input SDM Interface enable. If 0 - the valid input is disregarded;
3583 acknowledge output is deasserted; all other signals are treated as usual;
3584 if 1 - normal activity. */
3585 #define UCM_REG_USDM_IFEN 0xe0018
3586 /* [RC 1] Set when the message length mismatch (relative to last indication)
3587 at the SDM interface is detected. */
3588 #define UCM_REG_USDM_LENGTH_MIS 0xe0158
3589 /* [RW 3] The weight of the SDM input in the WRR mechanism. 0 stands for
3590 weight 8 (the most prioritised); 1 stands for weight 1(least
3591 prioritised); 2 stands for weight 2; tc. */
3592 #define UCM_REG_USDM_WEIGHT 0xe00c8
3593 /* [RW 1] Input xsem Interface enable. If 0 - the valid input is
3594 disregarded; acknowledge output is deasserted; all other signals are
3595 treated as usual; if 1 - normal activity. */
3596 #define UCM_REG_XSEM_IFEN 0xe002c
3597 /* [RC 1] Set when the message length mismatch (relative to last indication)
3598 at the xsem interface isdetected. */
3599 #define UCM_REG_XSEM_LENGTH_MIS 0xe0164
3600 /* [RW 3] The weight of the input xsem in the WRR mechanism. 0 stands for
3601 weight 8 (the most prioritised); 1 stands for weight 1(least
3602 prioritised); 2 stands for weight 2; tc. */
3603 #define UCM_REG_XSEM_WEIGHT 0xe00bc
3604 /* [RW 20] Indirect access to the descriptor table of the XX protection
3605 mechanism. The fields are:[5:0] - message length; 14:6] - message
3606 pointer; 19:15] - next pointer. */
3607 #define UCM_REG_XX_DESCR_TABLE 0xe0280
3608 #define UCM_REG_XX_DESCR_TABLE_SIZE 32
3609 /* [R 6] Use to read the XX protection Free counter. */
3610 #define UCM_REG_XX_FREE 0xe016c
3611 /* [RW 6] Initial value for the credit counter; responsible for fulfilling
3612 of the Input Stage XX protection buffer by the XX protection pending
3613 messages. Write writes the initial credit value; read returns the current
3614 value of the credit counter. Must be initialized to 12 at start-up. */
3615 #define UCM_REG_XX_INIT_CRD 0xe0224
3616 /* [RW 6] The maximum number of pending messages; which may be stored in XX
3617 protection. ~ucm_registers_xx_free.xx_free read on read. */
3618 #define UCM_REG_XX_MSG_NUM 0xe0228
3619 /* [RW 8] The Event ID; sent to the STORM in case of XX overflow. */
3620 #define UCM_REG_XX_OVFL_EVNT_ID 0xe004c
3621 /* [RW 16] Indirect access to the XX table of the XX protection mechanism.
3622 The fields are: [4:0] - tail pointer; 10:5] - Link List size; 15:11] -
3624 #define UCM_REG_XX_TABLE 0xe0300
3625 /* [RW 8] The event id for aggregated interrupt 0 */
3626 #define USDM_REG_AGG_INT_EVENT_0 0xc4038
3627 #define USDM_REG_AGG_INT_EVENT_1 0xc403c
3628 #define USDM_REG_AGG_INT_EVENT_2 0xc4040
3629 #define USDM_REG_AGG_INT_EVENT_4 0xc4048
3630 #define USDM_REG_AGG_INT_EVENT_5 0xc404c
3631 #define USDM_REG_AGG_INT_EVENT_6 0xc4050
3632 /* [RW 1] For each aggregated interrupt index whether the mode is normal (0)
3633 or auto-mask-mode (1) */
3634 #define USDM_REG_AGG_INT_MODE_0 0xc41b8
3635 #define USDM_REG_AGG_INT_MODE_1 0xc41bc
3636 #define USDM_REG_AGG_INT_MODE_4 0xc41c8
3637 #define USDM_REG_AGG_INT_MODE_5 0xc41cc
3638 #define USDM_REG_AGG_INT_MODE_6 0xc41d0
3639 /* [RW 1] The T bit for aggregated interrupt 5 */
3640 #define USDM_REG_AGG_INT_T_5 0xc40cc
3641 #define USDM_REG_AGG_INT_T_6 0xc40d0
3642 /* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */
3643 #define USDM_REG_CFC_RSP_START_ADDR 0xc4008
3644 /* [RW 16] The maximum value of the competion counter #0 */
3645 #define USDM_REG_CMP_COUNTER_MAX0 0xc401c
3646 /* [RW 16] The maximum value of the competion counter #1 */
3647 #define USDM_REG_CMP_COUNTER_MAX1 0xc4020
3648 /* [RW 16] The maximum value of the competion counter #2 */
3649 #define USDM_REG_CMP_COUNTER_MAX2 0xc4024
3650 /* [RW 16] The maximum value of the competion counter #3 */
3651 #define USDM_REG_CMP_COUNTER_MAX3 0xc4028
3652 /* [RW 13] The start address in the internal RAM for the completion
3654 #define USDM_REG_CMP_COUNTER_START_ADDR 0xc400c
3655 #define USDM_REG_ENABLE_IN1 0xc4238
3656 #define USDM_REG_ENABLE_IN2 0xc423c
3657 #define USDM_REG_ENABLE_OUT1 0xc4240
3658 #define USDM_REG_ENABLE_OUT2 0xc4244
3659 /* [RW 4] The initial number of messages that can be sent to the pxp control
3660 interface without receiving any ACK. */
3661 #define USDM_REG_INIT_CREDIT_PXP_CTRL 0xc44c0
3662 /* [ST 32] The number of ACK after placement messages received */
3663 #define USDM_REG_NUM_OF_ACK_AFTER_PLACE 0xc4280
3664 /* [ST 32] The number of packet end messages received from the parser */
3665 #define USDM_REG_NUM_OF_PKT_END_MSG 0xc4278
3666 /* [ST 32] The number of requests received from the pxp async if */
3667 #define USDM_REG_NUM_OF_PXP_ASYNC_REQ 0xc427c
3668 /* [ST 32] The number of commands received in queue 0 */
3669 #define USDM_REG_NUM_OF_Q0_CMD 0xc4248
3670 /* [ST 32] The number of commands received in queue 10 */
3671 #define USDM_REG_NUM_OF_Q10_CMD 0xc4270
3672 /* [ST 32] The number of commands received in queue 11 */
3673 #define USDM_REG_NUM_OF_Q11_CMD 0xc4274
3674 /* [ST 32] The number of commands received in queue 1 */
3675 #define USDM_REG_NUM_OF_Q1_CMD 0xc424c
3676 /* [ST 32] The number of commands received in queue 2 */
3677 #define USDM_REG_NUM_OF_Q2_CMD 0xc4250
3678 /* [ST 32] The number of commands received in queue 3 */
3679 #define USDM_REG_NUM_OF_Q3_CMD 0xc4254
3680 /* [ST 32] The number of commands received in queue 4 */
3681 #define USDM_REG_NUM_OF_Q4_CMD 0xc4258
3682 /* [ST 32] The number of commands received in queue 5 */
3683 #define USDM_REG_NUM_OF_Q5_CMD 0xc425c
3684 /* [ST 32] The number of commands received in queue 6 */
3685 #define USDM_REG_NUM_OF_Q6_CMD 0xc4260
3686 /* [ST 32] The number of commands received in queue 7 */
3687 #define USDM_REG_NUM_OF_Q7_CMD 0xc4264
3688 /* [ST 32] The number of commands received in queue 8 */
3689 #define USDM_REG_NUM_OF_Q8_CMD 0xc4268
3690 /* [ST 32] The number of commands received in queue 9 */
3691 #define USDM_REG_NUM_OF_Q9_CMD 0xc426c
3692 /* [RW 13] The start address in the internal RAM for the packet end message */
3693 #define USDM_REG_PCK_END_MSG_START_ADDR 0xc4014
3694 /* [RW 13] The start address in the internal RAM for queue counters */
3695 #define USDM_REG_Q_COUNTER_START_ADDR 0xc4010
3696 /* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */
3697 #define USDM_REG_RSP_PXP_CTRL_RDATA_EMPTY 0xc4550
3698 /* [R 1] parser fifo empty in sdm_sync block */
3699 #define USDM_REG_SYNC_PARSER_EMPTY 0xc4558
3700 /* [R 1] parser serial fifo empty in sdm_sync block */
3701 #define USDM_REG_SYNC_SYNC_EMPTY 0xc4560
3702 /* [RW 32] Tick for timer counter. Applicable only when
3703 ~usdm_registers_timer_tick_enable.timer_tick_enable =1 */
3704 #define USDM_REG_TIMER_TICK 0xc4000
3705 /* [RW 32] Interrupt mask register #0 read/write */
3706 #define USDM_REG_USDM_INT_MASK_0 0xc42a0
3707 #define USDM_REG_USDM_INT_MASK_1 0xc42b0
3708 /* [R 32] Interrupt register #0 read */
3709 #define USDM_REG_USDM_INT_STS_0 0xc4294
3710 #define USDM_REG_USDM_INT_STS_1 0xc42a4
3711 /* [RW 11] Parity mask register #0 read/write */
3712 #define USDM_REG_USDM_PRTY_MASK 0xc42c0
3713 /* [R 11] Parity register #0 read */
3714 #define USDM_REG_USDM_PRTY_STS 0xc42b4
3715 /* [RW 5] The number of time_slots in the arbitration cycle */
3716 #define USEM_REG_ARB_CYCLE_SIZE 0x300034
3717 /* [RW 3] The source that is associated with arbitration element 0. Source
3718 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
3719 sleeping thread with priority 1; 4- sleeping thread with priority 2 */
3720 #define USEM_REG_ARB_ELEMENT0 0x300020
3721 /* [RW 3] The source that is associated with arbitration element 1. Source
3722 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
3723 sleeping thread with priority 1; 4- sleeping thread with priority 2.
3724 Could not be equal to register ~usem_registers_arb_element0.arb_element0 */
3725 #define USEM_REG_ARB_ELEMENT1 0x300024
3726 /* [RW 3] The source that is associated with arbitration element 2. Source
3727 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
3728 sleeping thread with priority 1; 4- sleeping thread with priority 2.
3729 Could not be equal to register ~usem_registers_arb_element0.arb_element0
3730 and ~usem_registers_arb_element1.arb_element1 */
3731 #define USEM_REG_ARB_ELEMENT2 0x300028
3732 /* [RW 3] The source that is associated with arbitration element 3. Source
3733 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
3734 sleeping thread with priority 1; 4- sleeping thread with priority 2.Could
3735 not be equal to register ~usem_registers_arb_element0.arb_element0 and
3736 ~usem_registers_arb_element1.arb_element1 and
3737 ~usem_registers_arb_element2.arb_element2 */
3738 #define USEM_REG_ARB_ELEMENT3 0x30002c
3739 /* [RW 3] The source that is associated with arbitration element 4. Source
3740 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
3741 sleeping thread with priority 1; 4- sleeping thread with priority 2.
3742 Could not be equal to register ~usem_registers_arb_element0.arb_element0
3743 and ~usem_registers_arb_element1.arb_element1 and
3744 ~usem_registers_arb_element2.arb_element2 and
3745 ~usem_registers_arb_element3.arb_element3 */
3746 #define USEM_REG_ARB_ELEMENT4 0x300030
3747 #define USEM_REG_ENABLE_IN 0x3000a4
3748 #define USEM_REG_ENABLE_OUT 0x3000a8
3749 /* [RW 32] This address space contains all registers and memories that are
3750 placed in SEM_FAST block. The SEM_FAST registers are described in
3751 appendix B. In order to access the sem_fast registers the base address
3752 ~fast_memory.fast_memory should be added to eachsem_fast register offset. */
3753 #define USEM_REG_FAST_MEMORY 0x320000
3754 /* [RW 1] Disables input messages from FIC0 May be updated during run_time
3756 #define USEM_REG_FIC0_DISABLE 0x300224
3757 /* [RW 1] Disables input messages from FIC1 May be updated during run_time
3759 #define USEM_REG_FIC1_DISABLE 0x300234
3760 /* [RW 15] Interrupt table Read and write access to it is not possible in
3761 the middle of the work */
3762 #define USEM_REG_INT_TABLE 0x300400
3763 /* [ST 24] Statistics register. The number of messages that entered through
3765 #define USEM_REG_MSG_NUM_FIC0 0x300000
3766 /* [ST 24] Statistics register. The number of messages that entered through
3768 #define USEM_REG_MSG_NUM_FIC1 0x300004
3769 /* [ST 24] Statistics register. The number of messages that were sent to
3771 #define USEM_REG_MSG_NUM_FOC0 0x300008
3772 /* [ST 24] Statistics register. The number of messages that were sent to
3774 #define USEM_REG_MSG_NUM_FOC1 0x30000c
3775 /* [ST 24] Statistics register. The number of messages that were sent to
3777 #define USEM_REG_MSG_NUM_FOC2 0x300010
3778 /* [ST 24] Statistics register. The number of messages that were sent to
3780 #define USEM_REG_MSG_NUM_FOC3 0x300014
3781 /* [RW 1] Disables input messages from the passive buffer May be updated
3782 during run_time by the microcode */
3783 #define USEM_REG_PAS_DISABLE 0x30024c
3784 /* [WB 128] Debug only. Passive buffer memory */
3785 #define USEM_REG_PASSIVE_BUFFER 0x302000
3786 /* [WB 46] pram memory. B45 is parity; b[44:0] - data. */
3787 #define USEM_REG_PRAM 0x340000
3788 /* [R 16] Valid sleeping threads indication have bit per thread */
3789 #define USEM_REG_SLEEP_THREADS_VALID 0x30026c
3790 /* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */
3791 #define USEM_REG_SLOW_EXT_STORE_EMPTY 0x3002a0
3792 /* [RW 16] List of free threads . There is a bit per thread. */
3793 #define USEM_REG_THREADS_LIST 0x3002e4
3794 /* [RW 3] The arbitration scheme of time_slot 0 */
3795 #define USEM_REG_TS_0_AS 0x300038
3796 /* [RW 3] The arbitration scheme of time_slot 10 */
3797 #define USEM_REG_TS_10_AS 0x300060
3798 /* [RW 3] The arbitration scheme of time_slot 11 */
3799 #define USEM_REG_TS_11_AS 0x300064
3800 /* [RW 3] The arbitration scheme of time_slot 12 */
3801 #define USEM_REG_TS_12_AS 0x300068
3802 /* [RW 3] The arbitration scheme of time_slot 13 */
3803 #define USEM_REG_TS_13_AS 0x30006c
3804 /* [RW 3] The arbitration scheme of time_slot 14 */
3805 #define USEM_REG_TS_14_AS 0x300070
3806 /* [RW 3] The arbitration scheme of time_slot 15 */
3807 #define USEM_REG_TS_15_AS 0x300074
3808 /* [RW 3] The arbitration scheme of time_slot 16 */
3809 #define USEM_REG_TS_16_AS 0x300078
3810 /* [RW 3] The arbitration scheme of time_slot 17 */
3811 #define USEM_REG_TS_17_AS 0x30007c
3812 /* [RW 3] The arbitration scheme of time_slot 18 */
3813 #define USEM_REG_TS_18_AS 0x300080
3814 /* [RW 3] The arbitration scheme of time_slot 1 */
3815 #define USEM_REG_TS_1_AS 0x30003c
3816 /* [RW 3] The arbitration scheme of time_slot 2 */
3817 #define USEM_REG_TS_2_AS 0x300040
3818 /* [RW 3] The arbitration scheme of time_slot 3 */
3819 #define USEM_REG_TS_3_AS 0x300044
3820 /* [RW 3] The arbitration scheme of time_slot 4 */
3821 #define USEM_REG_TS_4_AS 0x300048
3822 /* [RW 3] The arbitration scheme of time_slot 5 */
3823 #define USEM_REG_TS_5_AS 0x30004c
3824 /* [RW 3] The arbitration scheme of time_slot 6 */
3825 #define USEM_REG_TS_6_AS 0x300050
3826 /* [RW 3] The arbitration scheme of time_slot 7 */
3827 #define USEM_REG_TS_7_AS 0x300054
3828 /* [RW 3] The arbitration scheme of time_slot 8 */
3829 #define USEM_REG_TS_8_AS 0x300058
3830 /* [RW 3] The arbitration scheme of time_slot 9 */
3831 #define USEM_REG_TS_9_AS 0x30005c
3832 /* [RW 32] Interrupt mask register #0 read/write */
3833 #define USEM_REG_USEM_INT_MASK_0 0x300110
3834 #define USEM_REG_USEM_INT_MASK_1 0x300120
3835 /* [R 32] Interrupt register #0 read */
3836 #define USEM_REG_USEM_INT_STS_0 0x300104
3837 #define USEM_REG_USEM_INT_STS_1 0x300114
3838 /* [RW 32] Parity mask register #0 read/write */
3839 #define USEM_REG_USEM_PRTY_MASK_0 0x300130
3840 #define USEM_REG_USEM_PRTY_MASK_1 0x300140
3841 /* [R 32] Parity register #0 read */
3842 #define USEM_REG_USEM_PRTY_STS_0 0x300124
3843 #define USEM_REG_USEM_PRTY_STS_1 0x300134
3844 /* [RW 2] The queue index for registration on Aux1 counter flag. */
3845 #define XCM_REG_AUX1_Q 0x20134
3846 /* [RW 2] Per each decision rule the queue index to register to. */
3847 #define XCM_REG_AUX_CNT_FLG_Q_19 0x201b0
3848 /* [R 5] Used to read the XX protection CAM occupancy counter. */
3849 #define XCM_REG_CAM_OCCUP 0x20244
3850 /* [RW 1] CDU AG read Interface enable. If 0 - the request input is
3851 disregarded; valid output is deasserted; all other signals are treated as
3852 usual; if 1 - normal activity. */
3853 #define XCM_REG_CDU_AG_RD_IFEN 0x20044
3854 /* [RW 1] CDU AG write Interface enable. If 0 - the request and valid input
3855 are disregarded; all other signals are treated as usual; if 1 - normal
3857 #define XCM_REG_CDU_AG_WR_IFEN 0x20040
3858 /* [RW 1] CDU STORM read Interface enable. If 0 - the request input is
3859 disregarded; valid output is deasserted; all other signals are treated as
3860 usual; if 1 - normal activity. */
3861 #define XCM_REG_CDU_SM_RD_IFEN 0x2004c
3862 /* [RW 1] CDU STORM write Interface enable. If 0 - the request and valid
3863 input is disregarded; all other signals are treated as usual; if 1 -
3865 #define XCM_REG_CDU_SM_WR_IFEN 0x20048
3866 /* [RW 4] CFC output initial credit. Max credit available - 15.Write writes
3867 the initial credit value; read returns the current value of the credit
3868 counter. Must be initialized to 1 at start-up. */
3869 #define XCM_REG_CFC_INIT_CRD 0x20404
3870 /* [RW 3] The weight of the CP input in the WRR mechanism. 0 stands for
3871 weight 8 (the most prioritised); 1 stands for weight 1(least
3872 prioritised); 2 stands for weight 2; tc. */
3873 #define XCM_REG_CP_WEIGHT 0x200dc
3874 /* [RW 1] Input csem Interface enable. If 0 - the valid input is
3875 disregarded; acknowledge output is deasserted; all other signals are
3876 treated as usual; if 1 - normal activity. */
3877 #define XCM_REG_CSEM_IFEN 0x20028
3878 /* [RC 1] Set at message length mismatch (relative to last indication) at
3879 the csem interface. */
3880 #define XCM_REG_CSEM_LENGTH_MIS 0x20228
3881 /* [RW 3] The weight of the input csem in the WRR mechanism. 0 stands for
3882 weight 8 (the most prioritised); 1 stands for weight 1(least
3883 prioritised); 2 stands for weight 2; tc. */
3884 #define XCM_REG_CSEM_WEIGHT 0x200c4
3885 /* [RW 1] Input dorq Interface enable. If 0 - the valid input is
3886 disregarded; acknowledge output is deasserted; all other signals are
3887 treated as usual; if 1 - normal activity. */
3888 #define XCM_REG_DORQ_IFEN 0x20030
3889 /* [RC 1] Set at message length mismatch (relative to last indication) at
3890 the dorq interface. */
3891 #define XCM_REG_DORQ_LENGTH_MIS 0x20230
3892 /* [RW 3] The weight of the input dorq in the WRR mechanism. 0 stands for
3893 weight 8 (the most prioritised); 1 stands for weight 1(least
3894 prioritised); 2 stands for weight 2; tc. */
3895 #define XCM_REG_DORQ_WEIGHT 0x200cc
3896 /* [RW 8] The Event ID in case the ErrorFlg input message bit is set. */
3897 #define XCM_REG_ERR_EVNT_ID 0x200b0
3898 /* [RW 28] The CM erroneous header for QM and Timers formatting. */
3899 #define XCM_REG_ERR_XCM_HDR 0x200ac
3900 /* [RW 8] The Event ID for Timers expiration. */
3901 #define XCM_REG_EXPR_EVNT_ID 0x200b4
3902 /* [RW 8] FIC0 output initial credit. Max credit available - 255.Write
3903 writes the initial credit value; read returns the current value of the
3904 credit counter. Must be initialized to 64 at start-up. */
3905 #define XCM_REG_FIC0_INIT_CRD 0x2040c
3906 /* [RW 8] FIC1 output initial credit. Max credit available - 255.Write
3907 writes the initial credit value; read returns the current value of the
3908 credit counter. Must be initialized to 64 at start-up. */
3909 #define XCM_REG_FIC1_INIT_CRD 0x20410
3910 #define XCM_REG_GLB_DEL_ACK_MAX_CNT_0 0x20118
3911 #define XCM_REG_GLB_DEL_ACK_MAX_CNT_1 0x2011c
3912 #define XCM_REG_GLB_DEL_ACK_TMR_VAL_0 0x20108
3913 #define XCM_REG_GLB_DEL_ACK_TMR_VAL_1 0x2010c
3914 /* [RW 1] Arbitratiojn between Input Arbiter groups: 0 - fair Round-Robin; 1
3915 - strict priority defined by ~xcm_registers_gr_ag_pr.gr_ag_pr;
3916 ~xcm_registers_gr_ld0_pr.gr_ld0_pr and
3917 ~xcm_registers_gr_ld1_pr.gr_ld1_pr. */
3918 #define XCM_REG_GR_ARB_TYPE 0x2020c
3919 /* [RW 2] Load (FIC0) channel group priority. The lowest priority is 0; the
3920 highest priority is 3. It is supposed that the Channel group is the
3921 compliment of the other 3 groups. */
3922 #define XCM_REG_GR_LD0_PR 0x20214
3923 /* [RW 2] Load (FIC1) channel group priority. The lowest priority is 0; the
3924 highest priority is 3. It is supposed that the Channel group is the
3925 compliment of the other 3 groups. */
3926 #define XCM_REG_GR_LD1_PR 0x20218
3927 /* [RW 1] Input nig0 Interface enable. If 0 - the valid input is
3928 disregarded; acknowledge output is deasserted; all other signals are
3929 treated as usual; if 1 - normal activity. */
3930 #define XCM_REG_NIG0_IFEN 0x20038
3931 /* [RC 1] Set at message length mismatch (relative to last indication) at
3932 the nig0 interface. */
3933 #define XCM_REG_NIG0_LENGTH_MIS 0x20238
3934 /* [RW 3] The weight of the input nig0 in the WRR mechanism. 0 stands for
3935 weight 8 (the most prioritised); 1 stands for weight 1(least
3936 prioritised); 2 stands for weight 2; tc. */
3937 #define XCM_REG_NIG0_WEIGHT 0x200d4
3938 /* [RW 1] Input nig1 Interface enable. If 0 - the valid input is
3939 disregarded; acknowledge output is deasserted; all other signals are
3940 treated as usual; if 1 - normal activity. */
3941 #define XCM_REG_NIG1_IFEN 0x2003c
3942 /* [RC 1] Set at message length mismatch (relative to last indication) at
3943 the nig1 interface. */
3944 #define XCM_REG_NIG1_LENGTH_MIS 0x2023c
3945 /* [RW 5] The number of double REG-pairs; loaded from the STORM context and
3946 sent to STORM; for a specific connection type. The double REG-pairs are
3947 used in order to align to STORM context row size of 128 bits. The offset
3948 of these data in the STORM context is always 0. Index _i stands for the
3949 connection type (one of 16). */
3950 #define XCM_REG_N_SM_CTX_LD_0 0x20060
3951 #define XCM_REG_N_SM_CTX_LD_1 0x20064
3952 #define XCM_REG_N_SM_CTX_LD_2 0x20068
3953 #define XCM_REG_N_SM_CTX_LD_3 0x2006c
3954 #define XCM_REG_N_SM_CTX_LD_4 0x20070
3955 #define XCM_REG_N_SM_CTX_LD_5 0x20074
3956 /* [RW 1] Input pbf Interface enable. If 0 - the valid input is disregarded;
3957 acknowledge output is deasserted; all other signals are treated as usual;
3958 if 1 - normal activity. */
3959 #define XCM_REG_PBF_IFEN 0x20034
3960 /* [RC 1] Set at message length mismatch (relative to last indication) at
3961 the pbf interface. */
3962 #define XCM_REG_PBF_LENGTH_MIS 0x20234
3963 /* [RW 3] The weight of the input pbf in the WRR mechanism. 0 stands for
3964 weight 8 (the most prioritised); 1 stands for weight 1(least
3965 prioritised); 2 stands for weight 2; tc. */
3966 #define XCM_REG_PBF_WEIGHT 0x200d0
3967 #define XCM_REG_PHYS_QNUM3_0 0x20100
3968 #define XCM_REG_PHYS_QNUM3_1 0x20104
3969 /* [RW 8] The Event ID for Timers formatting in case of stop done. */
3970 #define XCM_REG_STOP_EVNT_ID 0x200b8
3971 /* [RC 1] Set at message length mismatch (relative to last indication) at
3972 the STORM interface. */
3973 #define XCM_REG_STORM_LENGTH_MIS 0x2021c
3974 /* [RW 3] The weight of the STORM input in the WRR mechanism. 0 stands for
3975 weight 8 (the most prioritised); 1 stands for weight 1(least
3976 prioritised); 2 stands for weight 2; tc. */
3977 #define XCM_REG_STORM_WEIGHT 0x200bc
3978 /* [RW 1] STORM - CM Interface enable. If 0 - the valid input is
3979 disregarded; acknowledge output is deasserted; all other signals are
3980 treated as usual; if 1 - normal activity. */
3981 #define XCM_REG_STORM_XCM_IFEN 0x20010
3982 /* [RW 4] Timers output initial credit. Max credit available - 15.Write
3983 writes the initial credit value; read returns the current value of the
3984 credit counter. Must be initialized to 4 at start-up. */
3985 #define XCM_REG_TM_INIT_CRD 0x2041c
3986 /* [RW 3] The weight of the Timers input in the WRR mechanism. 0 stands for
3987 weight 8 (the most prioritised); 1 stands for weight 1(least
3988 prioritised); 2 stands for weight 2; tc. */
3989 #define XCM_REG_TM_WEIGHT 0x200ec
3990 /* [RW 28] The CM header for Timers expiration command. */
3991 #define XCM_REG_TM_XCM_HDR 0x200a8
3992 /* [RW 1] Timers - CM Interface enable. If 0 - the valid input is
3993 disregarded; acknowledge output is deasserted; all other signals are
3994 treated as usual; if 1 - normal activity. */
3995 #define XCM_REG_TM_XCM_IFEN 0x2001c
3996 /* [RW 1] Input tsem Interface enable. If 0 - the valid input is
3997 disregarded; acknowledge output is deasserted; all other signals are
3998 treated as usual; if 1 - normal activity. */
3999 #define XCM_REG_TSEM_IFEN 0x20024
4000 /* [RC 1] Set at message length mismatch (relative to last indication) at
4001 the tsem interface. */
4002 #define XCM_REG_TSEM_LENGTH_MIS 0x20224
4003 /* [RW 3] The weight of the input tsem in the WRR mechanism. 0 stands for
4004 weight 8 (the most prioritised); 1 stands for weight 1(least
4005 prioritised); 2 stands for weight 2; tc. */
4006 #define XCM_REG_TSEM_WEIGHT 0x200c0
4007 /* [RW 2] The queue index for registration on UNA greater NXT decision rule. */
4008 #define XCM_REG_UNA_GT_NXT_Q 0x20120
4009 /* [RW 1] Input usem Interface enable. If 0 - the valid input is
4010 disregarded; acknowledge output is deasserted; all other signals are
4011 treated as usual; if 1 - normal activity. */
4012 #define XCM_REG_USEM_IFEN 0x2002c
4013 /* [RC 1] Message length mismatch (relative to last indication) at the usem
4015 #define XCM_REG_USEM_LENGTH_MIS 0x2022c
4016 /* [RW 3] The weight of the input usem in the WRR mechanism. 0 stands for
4017 weight 8 (the most prioritised); 1 stands for weight 1(least
4018 prioritised); 2 stands for weight 2; tc. */
4019 #define XCM_REG_USEM_WEIGHT 0x200c8
4020 #define XCM_REG_WU_DA_CNT_CMD00 0x201d4
4021 #define XCM_REG_WU_DA_CNT_CMD01 0x201d8
4022 #define XCM_REG_WU_DA_CNT_CMD10 0x201dc
4023 #define XCM_REG_WU_DA_CNT_CMD11 0x201e0
4024 #define XCM_REG_WU_DA_CNT_UPD_VAL00 0x201e4
4025 #define XCM_REG_WU_DA_CNT_UPD_VAL01 0x201e8
4026 #define XCM_REG_WU_DA_CNT_UPD_VAL10 0x201ec
4027 #define XCM_REG_WU_DA_CNT_UPD_VAL11 0x201f0
4028 #define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD00 0x201c4
4029 #define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD01 0x201c8
4030 #define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD10 0x201cc
4031 #define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD11 0x201d0
4032 /* [RW 1] CM - CFC Interface enable. If 0 - the valid input is disregarded;
4033 acknowledge output is deasserted; all other signals are treated as usual;
4034 if 1 - normal activity. */
4035 #define XCM_REG_XCM_CFC_IFEN 0x20050
4036 /* [RW 14] Interrupt mask register #0 read/write */
4037 #define XCM_REG_XCM_INT_MASK 0x202b4
4038 /* [R 14] Interrupt register #0 read */
4039 #define XCM_REG_XCM_INT_STS 0x202a8
4040 /* [R 30] Parity register #0 read */
4041 #define XCM_REG_XCM_PRTY_STS 0x202b8
4042 /* [RW 4] The size of AG context region 0 in REG-pairs. Designates the MS
4043 REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5).
4044 Is used to determine the number of the AG context REG-pairs written back;
4045 when the Reg1WbFlg isn't set. */
4046 #define XCM_REG_XCM_REG0_SZ 0x200f4
4047 /* [RW 1] CM - STORM 0 Interface enable. If 0 - the acknowledge input is
4048 disregarded; valid is deasserted; all other signals are treated as usual;
4049 if 1 - normal activity. */
4050 #define XCM_REG_XCM_STORM0_IFEN 0x20004
4051 /* [RW 1] CM - STORM 1 Interface enable. If 0 - the acknowledge input is
4052 disregarded; valid is deasserted; all other signals are treated as usual;
4053 if 1 - normal activity. */
4054 #define XCM_REG_XCM_STORM1_IFEN 0x20008
4055 /* [RW 1] CM - Timers Interface enable. If 0 - the valid input is
4056 disregarded; acknowledge output is deasserted; all other signals are
4057 treated as usual; if 1 - normal activity. */
4058 #define XCM_REG_XCM_TM_IFEN 0x20020
4059 /* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input is
4060 disregarded; valid is deasserted; all other signals are treated as usual;
4061 if 1 - normal activity. */
4062 #define XCM_REG_XCM_XQM_IFEN 0x2000c
4063 /* [RW 1] If set the Q index; received from the QM is inserted to event ID. */
4064 #define XCM_REG_XCM_XQM_USE_Q 0x200f0
4065 /* [RW 4] The value by which CFC updates the activity counter at QM bypass. */
4066 #define XCM_REG_XQM_BYP_ACT_UPD 0x200fc
4067 /* [RW 6] QM output initial credit. Max credit available - 32.Write writes
4068 the initial credit value; read returns the current value of the credit
4069 counter. Must be initialized to 32 at start-up. */
4070 #define XCM_REG_XQM_INIT_CRD 0x20420
4071 /* [RW 3] The weight of the QM (primary) input in the WRR mechanism. 0
4072 stands for weight 8 (the most prioritised); 1 stands for weight 1(least
4073 prioritised); 2 stands for weight 2; tc. */
4074 #define XCM_REG_XQM_P_WEIGHT 0x200e4
4075 /* [RW 3] The weight of the QM (secondary) input in the WRR mechanism. 0
4076 stands for weight 8 (the most prioritised); 1 stands for weight 1(least
4077 prioritised); 2 stands for weight 2; tc. */
4078 #define XCM_REG_XQM_S_WEIGHT 0x200e8
4079 /* [RW 28] The CM header value for QM request (primary). */
4080 #define XCM_REG_XQM_XCM_HDR_P 0x200a0
4081 /* [RW 28] The CM header value for QM request (secondary). */
4082 #define XCM_REG_XQM_XCM_HDR_S 0x200a4
4083 /* [RW 1] QM - CM Interface enable. If 0 - the valid input is disregarded;
4084 acknowledge output is deasserted; all other signals are treated as usual;
4085 if 1 - normal activity. */
4086 #define XCM_REG_XQM_XCM_IFEN 0x20014
4087 /* [RW 1] Input SDM Interface enable. If 0 - the valid input is disregarded;
4088 acknowledge output is deasserted; all other signals are treated as usual;
4089 if 1 - normal activity. */
4090 #define XCM_REG_XSDM_IFEN 0x20018
4091 /* [RC 1] Set at message length mismatch (relative to last indication) at
4092 the SDM interface. */
4093 #define XCM_REG_XSDM_LENGTH_MIS 0x20220
4094 /* [RW 3] The weight of the SDM input in the WRR mechanism. 0 stands for
4095 weight 8 (the most prioritised); 1 stands for weight 1(least
4096 prioritised); 2 stands for weight 2; tc. */
4097 #define XCM_REG_XSDM_WEIGHT 0x200e0
4098 /* [RW 17] Indirect access to the descriptor table of the XX protection
4099 mechanism. The fields are: [5:0] - message length; 11:6] - message
4100 pointer; 16:12] - next pointer. */
4101 #define XCM_REG_XX_DESCR_TABLE 0x20480
4102 #define XCM_REG_XX_DESCR_TABLE_SIZE 32
4103 /* [R 6] Used to read the XX protection Free counter. */
4104 #define XCM_REG_XX_FREE 0x20240
4105 /* [RW 6] Initial value for the credit counter; responsible for fulfilling
4106 of the Input Stage XX protection buffer by the XX protection pending
4107 messages. Max credit available - 3.Write writes the initial credit value;
4108 read returns the current value of the credit counter. Must be initialized
4109 to 2 at start-up. */
4110 #define XCM_REG_XX_INIT_CRD 0x20424
4111 /* [RW 6] The maximum number of pending messages; which may be stored in XX
4112 protection. ~xcm_registers_xx_free.xx_free read on read. */
4113 #define XCM_REG_XX_MSG_NUM 0x20428
4114 /* [RW 8] The Event ID; sent to the STORM in case of XX overflow. */
4115 #define XCM_REG_XX_OVFL_EVNT_ID 0x20058
4116 /* [RW 16] Indirect access to the XX table of the XX protection mechanism.
4117 The fields are:[4:0] - tail pointer; 9:5] - Link List size; 14:10] -
4119 #define XCM_REG_XX_TABLE 0x20500
4120 /* [RW 8] The event id for aggregated interrupt 0 */
4121 #define XSDM_REG_AGG_INT_EVENT_0 0x166038
4122 #define XSDM_REG_AGG_INT_EVENT_1 0x16603c
4123 #define XSDM_REG_AGG_INT_EVENT_10 0x166060
4124 #define XSDM_REG_AGG_INT_EVENT_11 0x166064
4125 #define XSDM_REG_AGG_INT_EVENT_12 0x166068
4126 #define XSDM_REG_AGG_INT_EVENT_13 0x16606c
4127 #define XSDM_REG_AGG_INT_EVENT_14 0x166070
4128 #define XSDM_REG_AGG_INT_EVENT_2 0x166040
4129 #define XSDM_REG_AGG_INT_EVENT_3 0x166044
4130 #define XSDM_REG_AGG_INT_EVENT_4 0x166048
4131 #define XSDM_REG_AGG_INT_EVENT_5 0x16604c
4132 #define XSDM_REG_AGG_INT_EVENT_6 0x166050
4133 #define XSDM_REG_AGG_INT_EVENT_7 0x166054
4134 #define XSDM_REG_AGG_INT_EVENT_8 0x166058
4135 #define XSDM_REG_AGG_INT_EVENT_9 0x16605c
4136 /* [RW 1] For each aggregated interrupt index whether the mode is normal (0)
4137 or auto-mask-mode (1) */
4138 #define XSDM_REG_AGG_INT_MODE_0 0x1661b8
4139 #define XSDM_REG_AGG_INT_MODE_1 0x1661bc
4140 /* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */
4141 #define XSDM_REG_CFC_RSP_START_ADDR 0x166008
4142 /* [RW 16] The maximum value of the competion counter #0 */
4143 #define XSDM_REG_CMP_COUNTER_MAX0 0x16601c
4144 /* [RW 16] The maximum value of the competion counter #1 */
4145 #define XSDM_REG_CMP_COUNTER_MAX1 0x166020
4146 /* [RW 16] The maximum value of the competion counter #2 */
4147 #define XSDM_REG_CMP_COUNTER_MAX2 0x166024
4148 /* [RW 16] The maximum value of the competion counter #3 */
4149 #define XSDM_REG_CMP_COUNTER_MAX3 0x166028
4150 /* [RW 13] The start address in the internal RAM for the completion
4152 #define XSDM_REG_CMP_COUNTER_START_ADDR 0x16600c
4153 #define XSDM_REG_ENABLE_IN1 0x166238
4154 #define XSDM_REG_ENABLE_IN2 0x16623c
4155 #define XSDM_REG_ENABLE_OUT1 0x166240
4156 #define XSDM_REG_ENABLE_OUT2 0x166244
4157 /* [RW 4] The initial number of messages that can be sent to the pxp control
4158 interface without receiving any ACK. */
4159 #define XSDM_REG_INIT_CREDIT_PXP_CTRL 0x1664bc
4160 /* [ST 32] The number of ACK after placement messages received */
4161 #define XSDM_REG_NUM_OF_ACK_AFTER_PLACE 0x16627c
4162 /* [ST 32] The number of packet end messages received from the parser */
4163 #define XSDM_REG_NUM_OF_PKT_END_MSG 0x166274
4164 /* [ST 32] The number of requests received from the pxp async if */
4165 #define XSDM_REG_NUM_OF_PXP_ASYNC_REQ 0x166278
4166 /* [ST 32] The number of commands received in queue 0 */
4167 #define XSDM_REG_NUM_OF_Q0_CMD 0x166248
4168 /* [ST 32] The number of commands received in queue 10 */
4169 #define XSDM_REG_NUM_OF_Q10_CMD 0x16626c
4170 /* [ST 32] The number of commands received in queue 11 */
4171 #define XSDM_REG_NUM_OF_Q11_CMD 0x166270
4172 /* [ST 32] The number of commands received in queue 1 */
4173 #define XSDM_REG_NUM_OF_Q1_CMD 0x16624c
4174 /* [ST 32] The number of commands received in queue 3 */
4175 #define XSDM_REG_NUM_OF_Q3_CMD 0x166250
4176 /* [ST 32] The number of commands received in queue 4 */
4177 #define XSDM_REG_NUM_OF_Q4_CMD 0x166254
4178 /* [ST 32] The number of commands received in queue 5 */
4179 #define XSDM_REG_NUM_OF_Q5_CMD 0x166258
4180 /* [ST 32] The number of commands received in queue 6 */
4181 #define XSDM_REG_NUM_OF_Q6_CMD 0x16625c
4182 /* [ST 32] The number of commands received in queue 7 */
4183 #define XSDM_REG_NUM_OF_Q7_CMD 0x166260
4184 /* [ST 32] The number of commands received in queue 8 */
4185 #define XSDM_REG_NUM_OF_Q8_CMD 0x166264
4186 /* [ST 32] The number of commands received in queue 9 */
4187 #define XSDM_REG_NUM_OF_Q9_CMD 0x166268
4188 /* [RW 13] The start address in the internal RAM for queue counters */
4189 #define XSDM_REG_Q_COUNTER_START_ADDR 0x166010
4190 /* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */
4191 #define XSDM_REG_RSP_PXP_CTRL_RDATA_EMPTY 0x166548
4192 /* [R 1] parser fifo empty in sdm_sync block */
4193 #define XSDM_REG_SYNC_PARSER_EMPTY 0x166550
4194 /* [R 1] parser serial fifo empty in sdm_sync block */
4195 #define XSDM_REG_SYNC_SYNC_EMPTY 0x166558
4196 /* [RW 32] Tick for timer counter. Applicable only when
4197 ~xsdm_registers_timer_tick_enable.timer_tick_enable =1 */
4198 #define XSDM_REG_TIMER_TICK 0x166000
4199 /* [RW 32] Interrupt mask register #0 read/write */
4200 #define XSDM_REG_XSDM_INT_MASK_0 0x16629c
4201 #define XSDM_REG_XSDM_INT_MASK_1 0x1662ac
4202 /* [R 32] Interrupt register #0 read */
4203 #define XSDM_REG_XSDM_INT_STS_0 0x166290
4204 #define XSDM_REG_XSDM_INT_STS_1 0x1662a0
4205 /* [RW 11] Parity mask register #0 read/write */
4206 #define XSDM_REG_XSDM_PRTY_MASK 0x1662bc
4207 /* [R 11] Parity register #0 read */
4208 #define XSDM_REG_XSDM_PRTY_STS 0x1662b0
4209 /* [RW 5] The number of time_slots in the arbitration cycle */
4210 #define XSEM_REG_ARB_CYCLE_SIZE 0x280034
4211 /* [RW 3] The source that is associated with arbitration element 0. Source
4212 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
4213 sleeping thread with priority 1; 4- sleeping thread with priority 2 */
4214 #define XSEM_REG_ARB_ELEMENT0 0x280020
4215 /* [RW 3] The source that is associated with arbitration element 1. Source
4216 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
4217 sleeping thread with priority 1; 4- sleeping thread with priority 2.
4218 Could not be equal to register ~xsem_registers_arb_element0.arb_element0 */
4219 #define XSEM_REG_ARB_ELEMENT1 0x280024
4220 /* [RW 3] The source that is associated with arbitration element 2. Source
4221 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
4222 sleeping thread with priority 1; 4- sleeping thread with priority 2.
4223 Could not be equal to register ~xsem_registers_arb_element0.arb_element0
4224 and ~xsem_registers_arb_element1.arb_element1 */
4225 #define XSEM_REG_ARB_ELEMENT2 0x280028
4226 /* [RW 3] The source that is associated with arbitration element 3. Source
4227 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
4228 sleeping thread with priority 1; 4- sleeping thread with priority 2.Could
4229 not be equal to register ~xsem_registers_arb_element0.arb_element0 and
4230 ~xsem_registers_arb_element1.arb_element1 and
4231 ~xsem_registers_arb_element2.arb_element2 */
4232 #define XSEM_REG_ARB_ELEMENT3 0x28002c
4233 /* [RW 3] The source that is associated with arbitration element 4. Source
4234 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
4235 sleeping thread with priority 1; 4- sleeping thread with priority 2.
4236 Could not be equal to register ~xsem_registers_arb_element0.arb_element0
4237 and ~xsem_registers_arb_element1.arb_element1 and
4238 ~xsem_registers_arb_element2.arb_element2 and
4239 ~xsem_registers_arb_element3.arb_element3 */
4240 #define XSEM_REG_ARB_ELEMENT4 0x280030
4241 #define XSEM_REG_ENABLE_IN 0x2800a4
4242 #define XSEM_REG_ENABLE_OUT 0x2800a8
4243 /* [RW 32] This address space contains all registers and memories that are
4244 placed in SEM_FAST block. The SEM_FAST registers are described in
4245 appendix B. In order to access the sem_fast registers the base address
4246 ~fast_memory.fast_memory should be added to eachsem_fast register offset. */
4247 #define XSEM_REG_FAST_MEMORY 0x2a0000
4248 /* [RW 1] Disables input messages from FIC0 May be updated during run_time
4250 #define XSEM_REG_FIC0_DISABLE 0x280224
4251 /* [RW 1] Disables input messages from FIC1 May be updated during run_time
4253 #define XSEM_REG_FIC1_DISABLE 0x280234
4254 /* [RW 15] Interrupt table Read and write access to it is not possible in
4255 the middle of the work */
4256 #define XSEM_REG_INT_TABLE 0x280400
4257 /* [ST 24] Statistics register. The number of messages that entered through
4259 #define XSEM_REG_MSG_NUM_FIC0 0x280000
4260 /* [ST 24] Statistics register. The number of messages that entered through
4262 #define XSEM_REG_MSG_NUM_FIC1 0x280004
4263 /* [ST 24] Statistics register. The number of messages that were sent to
4265 #define XSEM_REG_MSG_NUM_FOC0 0x280008
4266 /* [ST 24] Statistics register. The number of messages that were sent to
4268 #define XSEM_REG_MSG_NUM_FOC1 0x28000c
4269 /* [ST 24] Statistics register. The number of messages that were sent to
4271 #define XSEM_REG_MSG_NUM_FOC2 0x280010
4272 /* [ST 24] Statistics register. The number of messages that were sent to
4274 #define XSEM_REG_MSG_NUM_FOC3 0x280014
4275 /* [RW 1] Disables input messages from the passive buffer May be updated
4276 during run_time by the microcode */
4277 #define XSEM_REG_PAS_DISABLE 0x28024c
4278 /* [WB 128] Debug only. Passive buffer memory */
4279 #define XSEM_REG_PASSIVE_BUFFER 0x282000
4280 /* [WB 46] pram memory. B45 is parity; b[44:0] - data. */
4281 #define XSEM_REG_PRAM 0x2c0000
4282 /* [R 16] Valid sleeping threads indication have bit per thread */
4283 #define XSEM_REG_SLEEP_THREADS_VALID 0x28026c
4284 /* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */
4285 #define XSEM_REG_SLOW_EXT_STORE_EMPTY 0x2802a0
4286 /* [RW 16] List of free threads . There is a bit per thread. */
4287 #define XSEM_REG_THREADS_LIST 0x2802e4
4288 /* [RW 3] The arbitration scheme of time_slot 0 */
4289 #define XSEM_REG_TS_0_AS 0x280038
4290 /* [RW 3] The arbitration scheme of time_slot 10 */
4291 #define XSEM_REG_TS_10_AS 0x280060
4292 /* [RW 3] The arbitration scheme of time_slot 11 */
4293 #define XSEM_REG_TS_11_AS 0x280064
4294 /* [RW 3] The arbitration scheme of time_slot 12 */
4295 #define XSEM_REG_TS_12_AS 0x280068
4296 /* [RW 3] The arbitration scheme of time_slot 13 */
4297 #define XSEM_REG_TS_13_AS 0x28006c
4298 /* [RW 3] The arbitration scheme of time_slot 14 */
4299 #define XSEM_REG_TS_14_AS 0x280070
4300 /* [RW 3] The arbitration scheme of time_slot 15 */
4301 #define XSEM_REG_TS_15_AS 0x280074
4302 /* [RW 3] The arbitration scheme of time_slot 16 */
4303 #define XSEM_REG_TS_16_AS 0x280078
4304 /* [RW 3] The arbitration scheme of time_slot 17 */
4305 #define XSEM_REG_TS_17_AS 0x28007c
4306 /* [RW 3] The arbitration scheme of time_slot 18 */
4307 #define XSEM_REG_TS_18_AS 0x280080
4308 /* [RW 3] The arbitration scheme of time_slot 1 */
4309 #define XSEM_REG_TS_1_AS 0x28003c
4310 /* [RW 3] The arbitration scheme of time_slot 2 */
4311 #define XSEM_REG_TS_2_AS 0x280040
4312 /* [RW 3] The arbitration scheme of time_slot 3 */
4313 #define XSEM_REG_TS_3_AS 0x280044
4314 /* [RW 3] The arbitration scheme of time_slot 4 */
4315 #define XSEM_REG_TS_4_AS 0x280048
4316 /* [RW 3] The arbitration scheme of time_slot 5 */
4317 #define XSEM_REG_TS_5_AS 0x28004c
4318 /* [RW 3] The arbitration scheme of time_slot 6 */
4319 #define XSEM_REG_TS_6_AS 0x280050
4320 /* [RW 3] The arbitration scheme of time_slot 7 */
4321 #define XSEM_REG_TS_7_AS 0x280054
4322 /* [RW 3] The arbitration scheme of time_slot 8 */
4323 #define XSEM_REG_TS_8_AS 0x280058
4324 /* [RW 3] The arbitration scheme of time_slot 9 */
4325 #define XSEM_REG_TS_9_AS 0x28005c
4326 /* [RW 32] Interrupt mask register #0 read/write */
4327 #define XSEM_REG_XSEM_INT_MASK_0 0x280110
4328 #define XSEM_REG_XSEM_INT_MASK_1 0x280120
4329 /* [R 32] Interrupt register #0 read */
4330 #define XSEM_REG_XSEM_INT_STS_0 0x280104
4331 #define XSEM_REG_XSEM_INT_STS_1 0x280114
4332 /* [RW 32] Parity mask register #0 read/write */
4333 #define XSEM_REG_XSEM_PRTY_MASK_0 0x280130
4334 #define XSEM_REG_XSEM_PRTY_MASK_1 0x280140
4335 /* [R 32] Parity register #0 read */
4336 #define XSEM_REG_XSEM_PRTY_STS_0 0x280124
4337 #define XSEM_REG_XSEM_PRTY_STS_1 0x280134
4338 #define MCPR_NVM_ACCESS_ENABLE_EN (1L<<0)
4339 #define MCPR_NVM_ACCESS_ENABLE_WR_EN (1L<<1)
4340 #define MCPR_NVM_ADDR_NVM_ADDR_VALUE (0xffffffL<<0)
4341 #define MCPR_NVM_CFG4_FLASH_SIZE (0x7L<<0)
4342 #define MCPR_NVM_COMMAND_DOIT (1L<<4)
4343 #define MCPR_NVM_COMMAND_DONE (1L<<3)
4344 #define MCPR_NVM_COMMAND_FIRST (1L<<7)
4345 #define MCPR_NVM_COMMAND_LAST (1L<<8)
4346 #define MCPR_NVM_COMMAND_WR (1L<<5)
4347 #define MCPR_NVM_SW_ARB_ARB_ARB1 (1L<<9)
4348 #define MCPR_NVM_SW_ARB_ARB_REQ_CLR1 (1L<<5)
4349 #define MCPR_NVM_SW_ARB_ARB_REQ_SET1 (1L<<1)
4350 #define BIGMAC_REGISTER_BMAC_CONTROL (0x00<<3)
4351 #define BIGMAC_REGISTER_BMAC_XGXS_CONTROL (0x01<<3)
4352 #define BIGMAC_REGISTER_CNT_MAX_SIZE (0x05<<3)
4353 #define BIGMAC_REGISTER_RX_CONTROL (0x21<<3)
4354 #define BIGMAC_REGISTER_RX_LLFC_MSG_FLDS (0x46<<3)
4355 #define BIGMAC_REGISTER_RX_MAX_SIZE (0x23<<3)
4356 #define BIGMAC_REGISTER_RX_STAT_GR64 (0x26<<3)
4357 #define BIGMAC_REGISTER_RX_STAT_GRIPJ (0x42<<3)
4358 #define BIGMAC_REGISTER_TX_CONTROL (0x07<<3)
4359 #define BIGMAC_REGISTER_TX_MAX_SIZE (0x09<<3)
4360 #define BIGMAC_REGISTER_TX_PAUSE_THRESHOLD (0x0A<<3)
4361 #define BIGMAC_REGISTER_TX_SOURCE_ADDR (0x08<<3)
4362 #define BIGMAC_REGISTER_TX_STAT_GTBYT (0x20<<3)
4363 #define BIGMAC_REGISTER_TX_STAT_GTPKT (0x0C<<3)
4364 #define EMAC_LED_1000MB_OVERRIDE (1L<<1)
4365 #define EMAC_LED_100MB_OVERRIDE (1L<<2)
4366 #define EMAC_LED_10MB_OVERRIDE (1L<<3)
4367 #define EMAC_LED_2500MB_OVERRIDE (1L<<12)
4368 #define EMAC_LED_OVERRIDE (1L<<0)
4369 #define EMAC_LED_TRAFFIC (1L<<6)
4370 #define EMAC_MDIO_COMM_COMMAND_ADDRESS (0L<<26)
4371 #define EMAC_MDIO_COMM_COMMAND_READ_45 (3L<<26)
4372 #define EMAC_MDIO_COMM_COMMAND_WRITE_45 (1L<<26)
4373 #define EMAC_MDIO_COMM_DATA (0xffffL<<0)
4374 #define EMAC_MDIO_COMM_START_BUSY (1L<<29)
4375 #define EMAC_MDIO_MODE_AUTO_POLL (1L<<4)
4376 #define EMAC_MDIO_MODE_CLAUSE_45 (1L<<31)
4377 #define EMAC_MDIO_MODE_CLOCK_CNT (0x3fL<<16)
4378 #define EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT 16
4379 #define EMAC_MODE_25G_MODE (1L<<5)
4380 #define EMAC_MODE_HALF_DUPLEX (1L<<1)
4381 #define EMAC_MODE_PORT_GMII (2L<<2)
4382 #define EMAC_MODE_PORT_MII (1L<<2)
4383 #define EMAC_MODE_PORT_MII_10M (3L<<2)
4384 #define EMAC_MODE_RESET (1L<<0)
4385 #define EMAC_REG_EMAC_LED 0xc
4386 #define EMAC_REG_EMAC_MAC_MATCH 0x10
4387 #define EMAC_REG_EMAC_MDIO_COMM 0xac
4388 #define EMAC_REG_EMAC_MDIO_MODE 0xb4
4389 #define EMAC_REG_EMAC_MODE 0x0
4390 #define EMAC_REG_EMAC_RX_MODE 0xc8
4391 #define EMAC_REG_EMAC_RX_MTU_SIZE 0x9c
4392 #define EMAC_REG_EMAC_RX_STAT_AC 0x180
4393 #define EMAC_REG_EMAC_RX_STAT_AC_28 0x1f4
4394 #define EMAC_REG_EMAC_RX_STAT_AC_COUNT 23
4395 #define EMAC_REG_EMAC_TX_MODE 0xbc
4396 #define EMAC_REG_EMAC_TX_STAT_AC 0x280
4397 #define EMAC_REG_EMAC_TX_STAT_AC_COUNT 22
4398 #define EMAC_RX_MODE_FLOW_EN (1L<<2)
4399 #define EMAC_RX_MODE_KEEP_VLAN_TAG (1L<<10)
4400 #define EMAC_RX_MODE_PROMISCUOUS (1L<<8)
4401 #define EMAC_RX_MODE_RESET (1L<<0)
4402 #define EMAC_RX_MTU_SIZE_JUMBO_ENA (1L<<31)
4403 #define EMAC_TX_MODE_EXT_PAUSE_EN (1L<<3)
4404 #define EMAC_TX_MODE_FLOW_EN (1L<<4)
4405 #define EMAC_TX_MODE_RESET (1L<<0)
4406 #define MISC_REGISTERS_GPIO_0 0
4407 #define MISC_REGISTERS_GPIO_1 1
4408 #define MISC_REGISTERS_GPIO_2 2
4409 #define MISC_REGISTERS_GPIO_3 3
4410 #define MISC_REGISTERS_GPIO_CLR_POS 16
4411 #define MISC_REGISTERS_GPIO_FLOAT (0xffL<<24)
4412 #define MISC_REGISTERS_GPIO_FLOAT_POS 24
4413 #define MISC_REGISTERS_GPIO_HIGH 1
4414 #define MISC_REGISTERS_GPIO_INPUT_HI_Z 2
4415 #define MISC_REGISTERS_GPIO_INT_CLR_POS 24
4416 #define MISC_REGISTERS_GPIO_INT_OUTPUT_CLR 0
4417 #define MISC_REGISTERS_GPIO_INT_OUTPUT_SET 1
4418 #define MISC_REGISTERS_GPIO_INT_SET_POS 16
4419 #define MISC_REGISTERS_GPIO_LOW 0
4420 #define MISC_REGISTERS_GPIO_OUTPUT_HIGH 1
4421 #define MISC_REGISTERS_GPIO_OUTPUT_LOW 0
4422 #define MISC_REGISTERS_GPIO_PORT_SHIFT 4
4423 #define MISC_REGISTERS_GPIO_SET_POS 8
4424 #define MISC_REGISTERS_RESET_REG_1_CLEAR 0x588
4425 #define MISC_REGISTERS_RESET_REG_1_RST_NIG (0x1<<7)
4426 #define MISC_REGISTERS_RESET_REG_1_SET 0x584
4427 #define MISC_REGISTERS_RESET_REG_2_CLEAR 0x598
4428 #define MISC_REGISTERS_RESET_REG_2_RST_BMAC0 (0x1<<0)
4429 #define MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE (0x1<<14)
4430 #define MISC_REGISTERS_RESET_REG_2_SET 0x594
4431 #define MISC_REGISTERS_RESET_REG_3_CLEAR 0x5a8
4432 #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_IDDQ (0x1<<1)
4433 #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_PWRDWN (0x1<<2)
4434 #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_PWRDWN_SD (0x1<<3)
4435 #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_RSTB_HW (0x1<<0)
4436 #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_IDDQ (0x1<<5)
4437 #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_PWRDWN (0x1<<6)
4438 #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_PWRDWN_SD (0x1<<7)
4439 #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_RSTB_HW (0x1<<4)
4440 #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_TXD_FIFO_RSTB (0x1<<8)
4441 #define MISC_REGISTERS_RESET_REG_3_SET 0x5a4
4442 #define MISC_REGISTERS_SPIO_4 4
4443 #define MISC_REGISTERS_SPIO_5 5
4444 #define MISC_REGISTERS_SPIO_7 7
4445 #define MISC_REGISTERS_SPIO_CLR_POS 16
4446 #define MISC_REGISTERS_SPIO_FLOAT (0xffL<<24)
4447 #define MISC_REGISTERS_SPIO_FLOAT_POS 24
4448 #define MISC_REGISTERS_SPIO_INPUT_HI_Z 2
4449 #define MISC_REGISTERS_SPIO_INT_OLD_SET_POS 16
4450 #define MISC_REGISTERS_SPIO_OUTPUT_HIGH 1
4451 #define MISC_REGISTERS_SPIO_OUTPUT_LOW 0
4452 #define MISC_REGISTERS_SPIO_SET_POS 8
4453 #define HW_LOCK_MAX_RESOURCE_VALUE 31
4454 #define HW_LOCK_RESOURCE_GPIO 1
4455 #define HW_LOCK_RESOURCE_MDIO 0
4456 #define HW_LOCK_RESOURCE_PORT0_ATT_MASK 3
4457 #define HW_LOCK_RESOURCE_SPIO 2
4458 #define HW_LOCK_RESOURCE_UNDI 5
4459 #define PRS_FLAG_OVERETH_IPV4 1
4460 #define AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR (1<<18)
4461 #define AEU_INPUTS_ATTN_BITS_CCM_HW_INTERRUPT (1<<31)
4462 #define AEU_INPUTS_ATTN_BITS_CDU_HW_INTERRUPT (1<<9)
4463 #define AEU_INPUTS_ATTN_BITS_CDU_PARITY_ERROR (1<<8)
4464 #define AEU_INPUTS_ATTN_BITS_CFC_HW_INTERRUPT (1<<7)
4465 #define AEU_INPUTS_ATTN_BITS_CFC_PARITY_ERROR (1<<6)
4466 #define AEU_INPUTS_ATTN_BITS_CSDM_HW_INTERRUPT (1<<29)
4467 #define AEU_INPUTS_ATTN_BITS_CSDM_PARITY_ERROR (1<<28)
4468 #define AEU_INPUTS_ATTN_BITS_CSEMI_HW_INTERRUPT (1<<1)
4469 #define AEU_INPUTS_ATTN_BITS_CSEMI_PARITY_ERROR (1<<0)
4470 #define AEU_INPUTS_ATTN_BITS_DEBUG_PARITY_ERROR (1<<18)
4471 #define AEU_INPUTS_ATTN_BITS_DMAE_HW_INTERRUPT (1<<11)
4472 #define AEU_INPUTS_ATTN_BITS_DOORBELLQ_HW_INTERRUPT (1<<13)
4473 #define AEU_INPUTS_ATTN_BITS_DOORBELLQ_PARITY_ERROR (1<<12)
4474 #define AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_0 (1<<5)
4475 #define AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_1 (1<<9)
4476 #define AEU_INPUTS_ATTN_BITS_IGU_PARITY_ERROR (1<<12)
4477 #define AEU_INPUTS_ATTN_BITS_MISC_HW_INTERRUPT (1<<15)
4478 #define AEU_INPUTS_ATTN_BITS_MISC_PARITY_ERROR (1<<14)
4479 #define AEU_INPUTS_ATTN_BITS_PARSER_PARITY_ERROR (1<<20)
4480 #define AEU_INPUTS_ATTN_BITS_PBCLIENT_PARITY_ERROR (1<<0)
4481 #define AEU_INPUTS_ATTN_BITS_PBF_HW_INTERRUPT (1<<31)
4482 #define AEU_INPUTS_ATTN_BITS_PXP_HW_INTERRUPT (1<<3)
4483 #define AEU_INPUTS_ATTN_BITS_PXP_PARITY_ERROR (1<<2)
4484 #define AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_HW_INTERRUPT (1<<5)
4485 #define AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR (1<<4)
4486 #define AEU_INPUTS_ATTN_BITS_QM_HW_INTERRUPT (1<<3)
4487 #define AEU_INPUTS_ATTN_BITS_QM_PARITY_ERROR (1<<2)
4488 #define AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR (1<<22)
4489 #define AEU_INPUTS_ATTN_BITS_SPIO5 (1<<15)
4490 #define AEU_INPUTS_ATTN_BITS_TCM_HW_INTERRUPT (1<<27)
4491 #define AEU_INPUTS_ATTN_BITS_TIMERS_HW_INTERRUPT (1<<5)
4492 #define AEU_INPUTS_ATTN_BITS_TSDM_HW_INTERRUPT (1<<25)
4493 #define AEU_INPUTS_ATTN_BITS_TSDM_PARITY_ERROR (1<<24)
4494 #define AEU_INPUTS_ATTN_BITS_TSEMI_HW_INTERRUPT (1<<29)
4495 #define AEU_INPUTS_ATTN_BITS_TSEMI_PARITY_ERROR (1<<28)
4496 #define AEU_INPUTS_ATTN_BITS_UCM_HW_INTERRUPT (1<<23)
4497 #define AEU_INPUTS_ATTN_BITS_UPB_HW_INTERRUPT (1<<27)
4498 #define AEU_INPUTS_ATTN_BITS_UPB_PARITY_ERROR (1<<26)
4499 #define AEU_INPUTS_ATTN_BITS_USDM_HW_INTERRUPT (1<<21)
4500 #define AEU_INPUTS_ATTN_BITS_USDM_PARITY_ERROR (1<<20)
4501 #define AEU_INPUTS_ATTN_BITS_USEMI_HW_INTERRUPT (1<<25)
4502 #define AEU_INPUTS_ATTN_BITS_USEMI_PARITY_ERROR (1<<24)
4503 #define AEU_INPUTS_ATTN_BITS_VAUX_PCI_CORE_PARITY_ERROR (1<<16)
4504 #define AEU_INPUTS_ATTN_BITS_XCM_HW_INTERRUPT (1<<9)
4505 #define AEU_INPUTS_ATTN_BITS_XSDM_HW_INTERRUPT (1<<7)
4506 #define AEU_INPUTS_ATTN_BITS_XSDM_PARITY_ERROR (1<<6)
4507 #define AEU_INPUTS_ATTN_BITS_XSEMI_HW_INTERRUPT (1<<11)
4508 #define AEU_INPUTS_ATTN_BITS_XSEMI_PARITY_ERROR (1<<10)
4509 #define RESERVED_GENERAL_ATTENTION_BIT_0 0
4511 #define EVEREST_GEN_ATTN_IN_USE_MASK 0x3ffe0
4512 #define EVEREST_LATCHED_ATTN_IN_USE_MASK 0xffe00000
4514 #define RESERVED_GENERAL_ATTENTION_BIT_6 6
4515 #define RESERVED_GENERAL_ATTENTION_BIT_7 7
4516 #define RESERVED_GENERAL_ATTENTION_BIT_8 8
4517 #define RESERVED_GENERAL_ATTENTION_BIT_9 9
4518 #define RESERVED_GENERAL_ATTENTION_BIT_10 10
4519 #define RESERVED_GENERAL_ATTENTION_BIT_11 11
4520 #define RESERVED_GENERAL_ATTENTION_BIT_12 12
4521 #define RESERVED_GENERAL_ATTENTION_BIT_13 13
4522 #define RESERVED_GENERAL_ATTENTION_BIT_14 14
4523 #define RESERVED_GENERAL_ATTENTION_BIT_15 15
4524 #define RESERVED_GENERAL_ATTENTION_BIT_16 16
4525 #define RESERVED_GENERAL_ATTENTION_BIT_17 17
4526 #define RESERVED_GENERAL_ATTENTION_BIT_18 18
4527 #define RESERVED_GENERAL_ATTENTION_BIT_19 19
4528 #define RESERVED_GENERAL_ATTENTION_BIT_20 20
4529 #define RESERVED_GENERAL_ATTENTION_BIT_21 21
4531 /* storm asserts attention bits */
4532 #define TSTORM_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_7
4533 #define USTORM_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_8
4534 #define CSTORM_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_9
4535 #define XSTORM_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_10
4537 /* mcp error attention bit */
4538 #define MCP_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_11
4540 /*E1H NIG status sync attention mapped to group 4-7*/
4541 #define LINK_SYNC_ATTENTION_BIT_FUNC_0 RESERVED_GENERAL_ATTENTION_BIT_12
4542 #define LINK_SYNC_ATTENTION_BIT_FUNC_1 RESERVED_GENERAL_ATTENTION_BIT_13
4543 #define LINK_SYNC_ATTENTION_BIT_FUNC_2 RESERVED_GENERAL_ATTENTION_BIT_14
4544 #define LINK_SYNC_ATTENTION_BIT_FUNC_3 RESERVED_GENERAL_ATTENTION_BIT_15
4545 #define LINK_SYNC_ATTENTION_BIT_FUNC_4 RESERVED_GENERAL_ATTENTION_BIT_16
4546 #define LINK_SYNC_ATTENTION_BIT_FUNC_5 RESERVED_GENERAL_ATTENTION_BIT_17
4547 #define LINK_SYNC_ATTENTION_BIT_FUNC_6 RESERVED_GENERAL_ATTENTION_BIT_18
4548 #define LINK_SYNC_ATTENTION_BIT_FUNC_7 RESERVED_GENERAL_ATTENTION_BIT_19
4551 #define LATCHED_ATTN_RBCR 23
4552 #define LATCHED_ATTN_RBCT 24
4553 #define LATCHED_ATTN_RBCN 25
4554 #define LATCHED_ATTN_RBCU 26
4555 #define LATCHED_ATTN_RBCP 27
4556 #define LATCHED_ATTN_TIMEOUT_GRC 28
4557 #define LATCHED_ATTN_RSVD_GRC 29
4558 #define LATCHED_ATTN_ROM_PARITY_MCP 30
4559 #define LATCHED_ATTN_UM_RX_PARITY_MCP 31
4560 #define LATCHED_ATTN_UM_TX_PARITY_MCP 32
4561 #define LATCHED_ATTN_SCPAD_PARITY_MCP 33
4563 #define GENERAL_ATTEN_WORD(atten_name) ((94 + atten_name) / 32)
4564 #define GENERAL_ATTEN_OFFSET(atten_name)\
4565 (1UL << ((94 + atten_name) % 32))
4567 * This file defines GRC base address for every block.
4568 * This file is included by chipsim, asm microcode and cpp microcode.
4569 * These values are used in Design.xml on regBase attribute
4570 * Use the base with the generated offsets of specific registers.
4573 #define GRCBASE_PXPCS 0x000000
4574 #define GRCBASE_PCICONFIG 0x002000
4575 #define GRCBASE_PCIREG 0x002400
4576 #define GRCBASE_EMAC0 0x008000
4577 #define GRCBASE_EMAC1 0x008400
4578 #define GRCBASE_DBU 0x008800
4579 #define GRCBASE_MISC 0x00A000
4580 #define GRCBASE_DBG 0x00C000
4581 #define GRCBASE_NIG 0x010000
4582 #define GRCBASE_XCM 0x020000
4583 #define GRCBASE_PRS 0x040000
4584 #define GRCBASE_SRCH 0x040400
4585 #define GRCBASE_TSDM 0x042000
4586 #define GRCBASE_TCM 0x050000
4587 #define GRCBASE_BRB1 0x060000
4588 #define GRCBASE_MCP 0x080000
4589 #define GRCBASE_UPB 0x0C1000
4590 #define GRCBASE_CSDM 0x0C2000
4591 #define GRCBASE_USDM 0x0C4000
4592 #define GRCBASE_CCM 0x0D0000
4593 #define GRCBASE_UCM 0x0E0000
4594 #define GRCBASE_CDU 0x101000
4595 #define GRCBASE_DMAE 0x102000
4596 #define GRCBASE_PXP 0x103000
4597 #define GRCBASE_CFC 0x104000
4598 #define GRCBASE_HC 0x108000
4599 #define GRCBASE_PXP2 0x120000
4600 #define GRCBASE_PBF 0x140000
4601 #define GRCBASE_XPB 0x161000
4602 #define GRCBASE_TIMERS 0x164000
4603 #define GRCBASE_XSDM 0x166000
4604 #define GRCBASE_QM 0x168000
4605 #define GRCBASE_DQ 0x170000
4606 #define GRCBASE_TSEM 0x180000
4607 #define GRCBASE_CSEM 0x200000
4608 #define GRCBASE_XSEM 0x280000
4609 #define GRCBASE_USEM 0x300000
4610 #define GRCBASE_MISC_AEU GRCBASE_MISC
4613 /* offset of configuration space in the pci core register */
4614 #define PCICFG_OFFSET 0x2000
4615 #define PCICFG_VENDOR_ID_OFFSET 0x00
4616 #define PCICFG_DEVICE_ID_OFFSET 0x02
4617 #define PCICFG_COMMAND_OFFSET 0x04
4618 #define PCICFG_COMMAND_IO_SPACE (1<<0)
4619 #define PCICFG_COMMAND_MEM_SPACE (1<<1)
4620 #define PCICFG_COMMAND_BUS_MASTER (1<<2)
4621 #define PCICFG_COMMAND_SPECIAL_CYCLES (1<<3)
4622 #define PCICFG_COMMAND_MWI_CYCLES (1<<4)
4623 #define PCICFG_COMMAND_VGA_SNOOP (1<<5)
4624 #define PCICFG_COMMAND_PERR_ENA (1<<6)
4625 #define PCICFG_COMMAND_STEPPING (1<<7)
4626 #define PCICFG_COMMAND_SERR_ENA (1<<8)
4627 #define PCICFG_COMMAND_FAST_B2B (1<<9)
4628 #define PCICFG_COMMAND_INT_DISABLE (1<<10)
4629 #define PCICFG_COMMAND_RESERVED (0x1f<<11)
4630 #define PCICFG_STATUS_OFFSET 0x06
4631 #define PCICFG_REVESION_ID_OFFSET 0x08
4632 #define PCICFG_CACHE_LINE_SIZE 0x0c
4633 #define PCICFG_LATENCY_TIMER 0x0d
4634 #define PCICFG_BAR_1_LOW 0x10
4635 #define PCICFG_BAR_1_HIGH 0x14
4636 #define PCICFG_BAR_2_LOW 0x18
4637 #define PCICFG_BAR_2_HIGH 0x1c
4638 #define PCICFG_SUBSYSTEM_VENDOR_ID_OFFSET 0x2c
4639 #define PCICFG_SUBSYSTEM_ID_OFFSET 0x2e
4640 #define PCICFG_INT_LINE 0x3c
4641 #define PCICFG_INT_PIN 0x3d
4642 #define PCICFG_PM_CAPABILITY 0x48
4643 #define PCICFG_PM_CAPABILITY_VERSION (0x3<<16)
4644 #define PCICFG_PM_CAPABILITY_CLOCK (1<<19)
4645 #define PCICFG_PM_CAPABILITY_RESERVED (1<<20)
4646 #define PCICFG_PM_CAPABILITY_DSI (1<<21)
4647 #define PCICFG_PM_CAPABILITY_AUX_CURRENT (0x7<<22)
4648 #define PCICFG_PM_CAPABILITY_D1_SUPPORT (1<<25)
4649 #define PCICFG_PM_CAPABILITY_D2_SUPPORT (1<<26)
4650 #define PCICFG_PM_CAPABILITY_PME_IN_D0 (1<<27)
4651 #define PCICFG_PM_CAPABILITY_PME_IN_D1 (1<<28)
4652 #define PCICFG_PM_CAPABILITY_PME_IN_D2 (1<<29)
4653 #define PCICFG_PM_CAPABILITY_PME_IN_D3_HOT (1<<30)
4654 #define PCICFG_PM_CAPABILITY_PME_IN_D3_COLD (1<<31)
4655 #define PCICFG_PM_CSR_OFFSET 0x4c
4656 #define PCICFG_PM_CSR_STATE (0x3<<0)
4657 #define PCICFG_PM_CSR_PME_ENABLE (1<<8)
4658 #define PCICFG_PM_CSR_PME_STATUS (1<<15)
4659 #define PCICFG_MSI_CAP_ID_OFFSET 0x58
4660 #define PCICFG_MSI_CONTROL_ENABLE (0x1<<16)
4661 #define PCICFG_MSI_CONTROL_MCAP (0x7<<17)
4662 #define PCICFG_MSI_CONTROL_MENA (0x7<<20)
4663 #define PCICFG_MSI_CONTROL_64_BIT_ADDR_CAP (0x1<<23)
4664 #define PCICFG_MSI_CONTROL_MSI_PVMASK_CAPABLE (0x1<<24)
4665 #define PCICFG_GRC_ADDRESS 0x78
4666 #define PCICFG_GRC_DATA 0x80
4667 #define PCICFG_MSIX_CAP_ID_OFFSET 0xa0
4668 #define PCICFG_MSIX_CONTROL_TABLE_SIZE (0x7ff<<16)
4669 #define PCICFG_MSIX_CONTROL_RESERVED (0x7<<27)
4670 #define PCICFG_MSIX_CONTROL_FUNC_MASK (0x1<<30)
4671 #define PCICFG_MSIX_CONTROL_MSIX_ENABLE (0x1<<31)
4673 #define PCICFG_DEVICE_CONTROL 0xb4
4674 #define PCICFG_DEVICE_STATUS 0xb6
4675 #define PCICFG_DEVICE_STATUS_CORR_ERR_DET (1<<0)
4676 #define PCICFG_DEVICE_STATUS_NON_FATAL_ERR_DET (1<<1)
4677 #define PCICFG_DEVICE_STATUS_FATAL_ERR_DET (1<<2)
4678 #define PCICFG_DEVICE_STATUS_UNSUP_REQ_DET (1<<3)
4679 #define PCICFG_DEVICE_STATUS_AUX_PWR_DET (1<<4)
4680 #define PCICFG_DEVICE_STATUS_NO_PEND (1<<5)
4681 #define PCICFG_LINK_CONTROL 0xbc
4684 #define BAR_USTRORM_INTMEM 0x400000
4685 #define BAR_CSTRORM_INTMEM 0x410000
4686 #define BAR_XSTRORM_INTMEM 0x420000
4687 #define BAR_TSTRORM_INTMEM 0x430000
4689 /* for accessing the IGU in case of status block ACK */
4690 #define BAR_IGU_INTMEM 0x440000
4692 #define BAR_DOORBELL_OFFSET 0x800000
4694 #define BAR_ME_REGISTER 0x450000
4696 /* config_2 offset */
4697 #define GRC_CONFIG_2_SIZE_REG 0x408
4698 #define PCI_CONFIG_2_BAR1_SIZE (0xfL<<0)
4699 #define PCI_CONFIG_2_BAR1_SIZE_DISABLED (0L<<0)
4700 #define PCI_CONFIG_2_BAR1_SIZE_64K (1L<<0)
4701 #define PCI_CONFIG_2_BAR1_SIZE_128K (2L<<0)
4702 #define PCI_CONFIG_2_BAR1_SIZE_256K (3L<<0)
4703 #define PCI_CONFIG_2_BAR1_SIZE_512K (4L<<0)
4704 #define PCI_CONFIG_2_BAR1_SIZE_1M (5L<<0)
4705 #define PCI_CONFIG_2_BAR1_SIZE_2M (6L<<0)
4706 #define PCI_CONFIG_2_BAR1_SIZE_4M (7L<<0)
4707 #define PCI_CONFIG_2_BAR1_SIZE_8M (8L<<0)
4708 #define PCI_CONFIG_2_BAR1_SIZE_16M (9L<<0)
4709 #define PCI_CONFIG_2_BAR1_SIZE_32M (10L<<0)
4710 #define PCI_CONFIG_2_BAR1_SIZE_64M (11L<<0)
4711 #define PCI_CONFIG_2_BAR1_SIZE_128M (12L<<0)
4712 #define PCI_CONFIG_2_BAR1_SIZE_256M (13L<<0)
4713 #define PCI_CONFIG_2_BAR1_SIZE_512M (14L<<0)
4714 #define PCI_CONFIG_2_BAR1_SIZE_1G (15L<<0)
4715 #define PCI_CONFIG_2_BAR1_64ENA (1L<<4)
4716 #define PCI_CONFIG_2_EXP_ROM_RETRY (1L<<5)
4717 #define PCI_CONFIG_2_CFG_CYCLE_RETRY (1L<<6)
4718 #define PCI_CONFIG_2_FIRST_CFG_DONE (1L<<7)
4719 #define PCI_CONFIG_2_EXP_ROM_SIZE (0xffL<<8)
4720 #define PCI_CONFIG_2_EXP_ROM_SIZE_DISABLED (0L<<8)
4721 #define PCI_CONFIG_2_EXP_ROM_SIZE_2K (1L<<8)
4722 #define PCI_CONFIG_2_EXP_ROM_SIZE_4K (2L<<8)
4723 #define PCI_CONFIG_2_EXP_ROM_SIZE_8K (3L<<8)
4724 #define PCI_CONFIG_2_EXP_ROM_SIZE_16K (4L<<8)
4725 #define PCI_CONFIG_2_EXP_ROM_SIZE_32K (5L<<8)
4726 #define PCI_CONFIG_2_EXP_ROM_SIZE_64K (6L<<8)
4727 #define PCI_CONFIG_2_EXP_ROM_SIZE_128K (7L<<8)
4728 #define PCI_CONFIG_2_EXP_ROM_SIZE_256K (8L<<8)
4729 #define PCI_CONFIG_2_EXP_ROM_SIZE_512K (9L<<8)
4730 #define PCI_CONFIG_2_EXP_ROM_SIZE_1M (10L<<8)
4731 #define PCI_CONFIG_2_EXP_ROM_SIZE_2M (11L<<8)
4732 #define PCI_CONFIG_2_EXP_ROM_SIZE_4M (12L<<8)
4733 #define PCI_CONFIG_2_EXP_ROM_SIZE_8M (13L<<8)
4734 #define PCI_CONFIG_2_EXP_ROM_SIZE_16M (14L<<8)
4735 #define PCI_CONFIG_2_EXP_ROM_SIZE_32M (15L<<8)
4736 #define PCI_CONFIG_2_BAR_PREFETCH (1L<<16)
4737 #define PCI_CONFIG_2_RESERVED0 (0x7fffL<<17)
4739 /* config_3 offset */
4740 #define GRC_CONFIG_3_SIZE_REG 0x40c
4741 #define PCI_CONFIG_3_STICKY_BYTE (0xffL<<0)
4742 #define PCI_CONFIG_3_FORCE_PME (1L<<24)
4743 #define PCI_CONFIG_3_PME_STATUS (1L<<25)
4744 #define PCI_CONFIG_3_PME_ENABLE (1L<<26)
4745 #define PCI_CONFIG_3_PM_STATE (0x3L<<27)
4746 #define PCI_CONFIG_3_VAUX_PRESET (1L<<30)
4747 #define PCI_CONFIG_3_PCI_POWER (1L<<31)
4749 #define GRC_BAR2_CONFIG 0x4e0
4750 #define PCI_CONFIG_2_BAR2_SIZE (0xfL<<0)
4751 #define PCI_CONFIG_2_BAR2_SIZE_DISABLED (0L<<0)
4752 #define PCI_CONFIG_2_BAR2_SIZE_64K (1L<<0)
4753 #define PCI_CONFIG_2_BAR2_SIZE_128K (2L<<0)
4754 #define PCI_CONFIG_2_BAR2_SIZE_256K (3L<<0)
4755 #define PCI_CONFIG_2_BAR2_SIZE_512K (4L<<0)
4756 #define PCI_CONFIG_2_BAR2_SIZE_1M (5L<<0)
4757 #define PCI_CONFIG_2_BAR2_SIZE_2M (6L<<0)
4758 #define PCI_CONFIG_2_BAR2_SIZE_4M (7L<<0)
4759 #define PCI_CONFIG_2_BAR2_SIZE_8M (8L<<0)
4760 #define PCI_CONFIG_2_BAR2_SIZE_16M (9L<<0)
4761 #define PCI_CONFIG_2_BAR2_SIZE_32M (10L<<0)
4762 #define PCI_CONFIG_2_BAR2_SIZE_64M (11L<<0)
4763 #define PCI_CONFIG_2_BAR2_SIZE_128M (12L<<0)
4764 #define PCI_CONFIG_2_BAR2_SIZE_256M (13L<<0)
4765 #define PCI_CONFIG_2_BAR2_SIZE_512M (14L<<0)
4766 #define PCI_CONFIG_2_BAR2_SIZE_1G (15L<<0)
4767 #define PCI_CONFIG_2_BAR2_64ENA (1L<<4)
4769 #define PCI_PM_DATA_A 0x410
4770 #define PCI_PM_DATA_B 0x414
4771 #define PCI_ID_VAL1 0x434
4772 #define PCI_ID_VAL2 0x438
4775 #define MDIO_REG_BANK_CL73_IEEEB0 0x0
4776 #define MDIO_CL73_IEEEB0_CL73_AN_CONTROL 0x0
4777 #define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_RESTART_AN 0x0200
4778 #define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN 0x1000
4779 #define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_MAIN_RST 0x8000
4781 #define MDIO_REG_BANK_CL73_IEEEB1 0x10
4782 #define MDIO_CL73_IEEEB1_AN_ADV1 0x00
4783 #define MDIO_CL73_IEEEB1_AN_ADV1_PAUSE 0x0400
4784 #define MDIO_CL73_IEEEB1_AN_ADV1_ASYMMETRIC 0x0800
4785 #define MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_BOTH 0x0C00
4786 #define MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_MASK 0x0C00
4787 #define MDIO_CL73_IEEEB1_AN_ADV2 0x01
4788 #define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M 0x0000
4789 #define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M_KX 0x0020
4790 #define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KX4 0x0040
4791 #define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KR 0x0080
4792 #define MDIO_CL73_IEEEB1_AN_LP_ADV1 0x03
4793 #define MDIO_CL73_IEEEB1_AN_LP_ADV1_PAUSE 0x0400
4794 #define MDIO_CL73_IEEEB1_AN_LP_ADV1_ASYMMETRIC 0x0800
4795 #define MDIO_CL73_IEEEB1_AN_LP_ADV1_PAUSE_BOTH 0x0C00
4796 #define MDIO_CL73_IEEEB1_AN_LP_ADV1_PAUSE_MASK 0x0C00
4798 #define MDIO_REG_BANK_RX0 0x80b0
4799 #define MDIO_RX0_RX_STATUS 0x10
4800 #define MDIO_RX0_RX_STATUS_SIGDET 0x8000
4801 #define MDIO_RX0_RX_STATUS_RX_SEQ_DONE 0x1000
4802 #define MDIO_RX0_RX_EQ_BOOST 0x1c
4803 #define MDIO_RX0_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7
4804 #define MDIO_RX0_RX_EQ_BOOST_OFFSET_CTRL 0x10
4806 #define MDIO_REG_BANK_RX1 0x80c0
4807 #define MDIO_RX1_RX_EQ_BOOST 0x1c
4808 #define MDIO_RX1_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7
4809 #define MDIO_RX1_RX_EQ_BOOST_OFFSET_CTRL 0x10
4811 #define MDIO_REG_BANK_RX2 0x80d0
4812 #define MDIO_RX2_RX_EQ_BOOST 0x1c
4813 #define MDIO_RX2_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7
4814 #define MDIO_RX2_RX_EQ_BOOST_OFFSET_CTRL 0x10
4816 #define MDIO_REG_BANK_RX3 0x80e0
4817 #define MDIO_RX3_RX_EQ_BOOST 0x1c
4818 #define MDIO_RX3_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7
4819 #define MDIO_RX3_RX_EQ_BOOST_OFFSET_CTRL 0x10
4821 #define MDIO_REG_BANK_RX_ALL 0x80f0
4822 #define MDIO_RX_ALL_RX_EQ_BOOST 0x1c
4823 #define MDIO_RX_ALL_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7
4824 #define MDIO_RX_ALL_RX_EQ_BOOST_OFFSET_CTRL 0x10
4826 #define MDIO_REG_BANK_TX0 0x8060
4827 #define MDIO_TX0_TX_DRIVER 0x17
4828 #define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK 0xf000
4829 #define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT 12
4830 #define MDIO_TX0_TX_DRIVER_IDRIVER_MASK 0x0f00
4831 #define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT 8
4832 #define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK 0x00f0
4833 #define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT 4
4834 #define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK 0x000e
4835 #define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT 1
4836 #define MDIO_TX0_TX_DRIVER_ICBUF1T 1
4838 #define MDIO_REG_BANK_TX1 0x8070
4839 #define MDIO_TX1_TX_DRIVER 0x17
4840 #define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK 0xf000
4841 #define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT 12
4842 #define MDIO_TX0_TX_DRIVER_IDRIVER_MASK 0x0f00
4843 #define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT 8
4844 #define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK 0x00f0
4845 #define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT 4
4846 #define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK 0x000e
4847 #define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT 1
4848 #define MDIO_TX0_TX_DRIVER_ICBUF1T 1
4850 #define MDIO_REG_BANK_TX2 0x8080
4851 #define MDIO_TX2_TX_DRIVER 0x17
4852 #define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK 0xf000
4853 #define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT 12
4854 #define MDIO_TX0_TX_DRIVER_IDRIVER_MASK 0x0f00
4855 #define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT 8
4856 #define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK 0x00f0
4857 #define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT 4
4858 #define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK 0x000e
4859 #define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT 1
4860 #define MDIO_TX0_TX_DRIVER_ICBUF1T 1
4862 #define MDIO_REG_BANK_TX3 0x8090
4863 #define MDIO_TX3_TX_DRIVER 0x17
4864 #define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK 0xf000
4865 #define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT 12
4866 #define MDIO_TX0_TX_DRIVER_IDRIVER_MASK 0x0f00
4867 #define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT 8
4868 #define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK 0x00f0
4869 #define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT 4
4870 #define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK 0x000e
4871 #define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT 1
4872 #define MDIO_TX0_TX_DRIVER_ICBUF1T 1
4874 #define MDIO_REG_BANK_XGXS_BLOCK0 0x8000
4875 #define MDIO_BLOCK0_XGXS_CONTROL 0x10
4877 #define MDIO_REG_BANK_XGXS_BLOCK1 0x8010
4878 #define MDIO_BLOCK1_LANE_CTRL0 0x15
4879 #define MDIO_BLOCK1_LANE_CTRL1 0x16
4880 #define MDIO_BLOCK1_LANE_CTRL2 0x17
4881 #define MDIO_BLOCK1_LANE_PRBS 0x19
4883 #define MDIO_REG_BANK_XGXS_BLOCK2 0x8100
4884 #define MDIO_XGXS_BLOCK2_RX_LN_SWAP 0x10
4885 #define MDIO_XGXS_BLOCK2_RX_LN_SWAP_ENABLE 0x8000
4886 #define MDIO_XGXS_BLOCK2_RX_LN_SWAP_FORCE_ENABLE 0x4000
4887 #define MDIO_XGXS_BLOCK2_TX_LN_SWAP 0x11
4888 #define MDIO_XGXS_BLOCK2_TX_LN_SWAP_ENABLE 0x8000
4889 #define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G 0x14
4890 #define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_CX4_XGXS 0x0001
4891 #define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_HIGIG_XGXS 0x0010
4892 #define MDIO_XGXS_BLOCK2_TEST_MODE_LANE 0x15
4894 #define MDIO_REG_BANK_GP_STATUS 0x8120
4895 #define MDIO_GP_STATUS_TOP_AN_STATUS1 0x1B
4896 #define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_AUTONEG_COMPLETE 0x0001
4897 #define MDIO_GP_STATUS_TOP_AN_STATUS1_CL37_AUTONEG_COMPLETE 0x0002
4898 #define MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS 0x0004
4899 #define MDIO_GP_STATUS_TOP_AN_STATUS1_DUPLEX_STATUS 0x0008
4900 #define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_MR_LP_NP_AN_ABLE 0x0010
4901 #define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_LP_NP_BAM_ABLE 0x0020
4902 #define MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_TXSIDE 0x0040
4903 #define MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_RXSIDE 0x0080
4904 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_MASK 0x3f00
4905 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10M 0x0000
4906 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_100M 0x0100
4907 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G 0x0200
4908 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_2_5G 0x0300
4909 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_5G 0x0400
4910 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_6G 0x0500
4911 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_HIG 0x0600
4912 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_CX4 0x0700
4913 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12G_HIG 0x0800
4914 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12_5G 0x0900
4915 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_13G 0x0A00
4916 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_15G 0x0B00
4917 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_16G 0x0C00
4918 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G_KX 0x0D00
4919 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_KX4 0x0E00
4922 #define MDIO_REG_BANK_10G_PARALLEL_DETECT 0x8130
4923 #define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_STATUS 0x10
4924 #define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_STATUS_PD_LINK 0x8000
4925 #define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL 0x11
4926 #define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL_PARDET10G_EN 0x1
4927 #define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK 0x13
4928 #define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK_CNT (0xb71<<1)
4930 #define MDIO_REG_BANK_SERDES_DIGITAL 0x8300
4931 #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1 0x10
4932 #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_FIBER_MODE 0x0001
4933 #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_TBI_IF 0x0002
4934 #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_SIGNAL_DETECT_EN 0x0004
4935 #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_INVERT_SIGNAL_DETECT 0x0008
4936 #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET 0x0010
4937 #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_MSTR_MODE 0x0020
4938 #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2 0x11
4939 #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_PRL_DT_EN 0x0001
4940 #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_AN_FST_TMR 0x0040
4941 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1 0x14
4942 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_DUPLEX 0x0004
4943 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_MASK 0x0018
4944 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_SHIFT 3
4945 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_2_5G 0x0018
4946 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_1G 0x0010
4947 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_100M 0x0008
4948 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_10M 0x0000
4949 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS2 0x15
4950 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS2_AN_DISABLED 0x0002
4951 #define MDIO_SERDES_DIGITAL_MISC1 0x18
4952 #define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_MASK 0xE000
4953 #define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_25M 0x0000
4954 #define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_100M 0x2000
4955 #define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_125M 0x4000
4956 #define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_156_25M 0x6000
4957 #define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_187_5M 0x8000
4958 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_SEL 0x0010
4959 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_MASK 0x000f
4960 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_2_5G 0x0000
4961 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_5G 0x0001
4962 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_6G 0x0002
4963 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_HIG 0x0003
4964 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_CX4 0x0004
4965 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_12G 0x0005
4966 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_12_5G 0x0006
4967 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_13G 0x0007
4968 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_15G 0x0008
4969 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_16G 0x0009
4971 #define MDIO_REG_BANK_OVER_1G 0x8320
4972 #define MDIO_OVER_1G_DIGCTL_3_4 0x14
4973 #define MDIO_OVER_1G_DIGCTL_3_4_MP_ID_MASK 0xffe0
4974 #define MDIO_OVER_1G_DIGCTL_3_4_MP_ID_SHIFT 5
4975 #define MDIO_OVER_1G_UP1 0x19
4976 #define MDIO_OVER_1G_UP1_2_5G 0x0001
4977 #define MDIO_OVER_1G_UP1_5G 0x0002
4978 #define MDIO_OVER_1G_UP1_6G 0x0004
4979 #define MDIO_OVER_1G_UP1_10G 0x0010
4980 #define MDIO_OVER_1G_UP1_10GH 0x0008
4981 #define MDIO_OVER_1G_UP1_12G 0x0020
4982 #define MDIO_OVER_1G_UP1_12_5G 0x0040
4983 #define MDIO_OVER_1G_UP1_13G 0x0080
4984 #define MDIO_OVER_1G_UP1_15G 0x0100
4985 #define MDIO_OVER_1G_UP1_16G 0x0200
4986 #define MDIO_OVER_1G_UP2 0x1A
4987 #define MDIO_OVER_1G_UP2_IPREDRIVER_MASK 0x0007
4988 #define MDIO_OVER_1G_UP2_IDRIVER_MASK 0x0038
4989 #define MDIO_OVER_1G_UP2_PREEMPHASIS_MASK 0x03C0
4990 #define MDIO_OVER_1G_UP3 0x1B
4991 #define MDIO_OVER_1G_UP3_HIGIG2 0x0001
4992 #define MDIO_OVER_1G_LP_UP1 0x1C
4993 #define MDIO_OVER_1G_LP_UP2 0x1D
4994 #define MDIO_OVER_1G_LP_UP2_MR_ADV_OVER_1G_MASK 0x03ff
4995 #define MDIO_OVER_1G_LP_UP2_PREEMPHASIS_MASK 0x0780
4996 #define MDIO_OVER_1G_LP_UP2_PREEMPHASIS_SHIFT 7
4997 #define MDIO_OVER_1G_LP_UP3 0x1E
4999 #define MDIO_REG_BANK_REMOTE_PHY 0x8330
5000 #define MDIO_REMOTE_PHY_MISC_RX_STATUS 0x10
5001 #define MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_OVER1G_MSG 0x0010
5002 #define MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_BRCM_OUI_MSG 0x0600
5004 #define MDIO_REG_BANK_BAM_NEXT_PAGE 0x8350
5005 #define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL 0x10
5006 #define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_BAM_MODE 0x0001
5007 #define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_TETON_AN 0x0002
5009 #define MDIO_REG_BANK_CL73_USERB0 0x8370
5010 #define MDIO_CL73_USERB0_CL73_UCTRL 0x10
5011 #define MDIO_CL73_USERB0_CL73_UCTRL_USTAT1_MUXSEL 0x0002
5012 #define MDIO_CL73_USERB0_CL73_USTAT1 0x11
5013 #define MDIO_CL73_USERB0_CL73_USTAT1_LINK_STATUS_CHECK 0x0100
5014 #define MDIO_CL73_USERB0_CL73_USTAT1_AN_GOOD_CHECK_BAM37 0x0400
5015 #define MDIO_CL73_USERB0_CL73_BAM_CTRL1 0x12
5016 #define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_EN 0x8000
5017 #define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_STATION_MNGR_EN 0x4000
5018 #define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_NP_AFTER_BP_EN 0x2000
5019 #define MDIO_CL73_USERB0_CL73_BAM_CTRL3 0x14
5020 #define MDIO_CL73_USERB0_CL73_BAM_CTRL3_USE_CL73_HCD_MR 0x0001
5022 #define MDIO_REG_BANK_AER_BLOCK 0xFFD0
5023 #define MDIO_AER_BLOCK_AER_REG 0x1E
5025 #define MDIO_REG_BANK_COMBO_IEEE0 0xFFE0
5026 #define MDIO_COMBO_IEEE0_MII_CONTROL 0x10
5027 #define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_MASK 0x2040
5028 #define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_10 0x0000
5029 #define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_100 0x2000
5030 #define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_1000 0x0040
5031 #define MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX 0x0100
5032 #define MDIO_COMBO_IEEO_MII_CONTROL_RESTART_AN 0x0200
5033 #define MDIO_COMBO_IEEO_MII_CONTROL_AN_EN 0x1000
5034 #define MDIO_COMBO_IEEO_MII_CONTROL_LOOPBACK 0x4000
5035 #define MDIO_COMBO_IEEO_MII_CONTROL_RESET 0x8000
5036 #define MDIO_COMBO_IEEE0_MII_STATUS 0x11
5037 #define MDIO_COMBO_IEEE0_MII_STATUS_LINK_PASS 0x0004
5038 #define MDIO_COMBO_IEEE0_MII_STATUS_AUTONEG_COMPLETE 0x0020
5039 #define MDIO_COMBO_IEEE0_AUTO_NEG_ADV 0x14
5040 #define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX 0x0020
5041 #define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_HALF_DUPLEX 0x0040
5042 #define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK 0x0180
5043 #define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE 0x0000
5044 #define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC 0x0080
5045 #define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC 0x0100
5046 #define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH 0x0180
5047 #define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_NEXT_PAGE 0x8000
5048 #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1 0x15
5049 #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_NEXT_PAGE 0x8000
5050 #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_ACK 0x4000
5051 #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_MASK 0x0180
5052 #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_NONE 0x0000
5053 #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_BOTH 0x0180
5054 #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_HALF_DUP_CAP 0x0040
5055 #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_FULL_DUP_CAP 0x0020
5056 /*WhenthelinkpartnerisinSGMIImode(bit0=1),then
5057 bit15=link,bit12=duplex,bits11:10=speed,bit14=acknowledge.
5058 Theotherbitsarereservedandshouldbezero*/
5059 #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_SGMII_MODE 0x0001
5062 #define MDIO_PMA_DEVAD 0x1
5064 #define MDIO_PMA_REG_CTRL 0x0
5065 #define MDIO_PMA_REG_STATUS 0x1
5066 #define MDIO_PMA_REG_10G_CTRL2 0x7
5067 #define MDIO_PMA_REG_RX_SD 0xa
5069 #define MDIO_PMA_REG_BCM_CTRL 0x0096
5070 #define MDIO_PMA_REG_FEC_CTRL 0x00ab
5071 #define MDIO_PMA_REG_RX_ALARM_CTRL 0x9000
5072 #define MDIO_PMA_REG_LASI_CTRL 0x9002
5073 #define MDIO_PMA_REG_RX_ALARM 0x9003
5074 #define MDIO_PMA_REG_TX_ALARM 0x9004
5075 #define MDIO_PMA_REG_LASI_STATUS 0x9005
5076 #define MDIO_PMA_REG_PHY_IDENTIFIER 0xc800
5077 #define MDIO_PMA_REG_DIGITAL_CTRL 0xc808
5078 #define MDIO_PMA_REG_DIGITAL_STATUS 0xc809
5079 #define MDIO_PMA_REG_TX_POWER_DOWN 0xca02
5080 #define MDIO_PMA_REG_CMU_PLL_BYPASS 0xca09
5081 #define MDIO_PMA_REG_MISC_CTRL 0xca0a
5082 #define MDIO_PMA_REG_GEN_CTRL 0xca10
5083 #define MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP 0x0188
5084 #define MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET 0x018a
5085 #define MDIO_PMA_REG_M8051_MSGIN_REG 0xca12
5086 #define MDIO_PMA_REG_M8051_MSGOUT_REG 0xca13
5087 #define MDIO_PMA_REG_ROM_VER1 0xca19
5088 #define MDIO_PMA_REG_ROM_VER2 0xca1a
5089 #define MDIO_PMA_REG_EDC_FFE_MAIN 0xca1b
5090 #define MDIO_PMA_REG_PLL_BANDWIDTH 0xca1d
5091 #define MDIO_PMA_REG_PLL_CTRL 0xca1e
5092 #define MDIO_PMA_REG_MISC_CTRL0 0xca23
5093 #define MDIO_PMA_REG_LRM_MODE 0xca3f
5094 #define MDIO_PMA_REG_CDR_BANDWIDTH 0xca46
5095 #define MDIO_PMA_REG_MISC_CTRL1 0xca85
5097 #define MDIO_PMA_REG_SFP_TWO_WIRE_CTRL 0x8000
5098 #define MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK 0x000c
5099 #define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_IDLE 0x0000
5100 #define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_COMPLETE 0x0004
5101 #define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_IN_PROGRESS 0x0008
5102 #define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_FAILED 0x000c
5103 #define MDIO_PMA_REG_SFP_TWO_WIRE_BYTE_CNT 0x8002
5104 #define MDIO_PMA_REG_SFP_TWO_WIRE_MEM_ADDR 0x8003
5105 #define MDIO_PMA_REG_8726_TWO_WIRE_DATA_BUF 0xc820
5106 #define MDIO_PMA_REG_8726_TWO_WIRE_DATA_MASK 0xff
5107 #define MDIO_PMA_REG_8726_TX_CTRL1 0xca01
5108 #define MDIO_PMA_REG_8726_TX_CTRL2 0xca05
5110 #define MDIO_PMA_REG_8727_TWO_WIRE_SLAVE_ADDR 0x8005
5111 #define MDIO_PMA_REG_8727_TWO_WIRE_DATA_BUF 0x8007
5112 #define MDIO_PMA_REG_8727_TWO_WIRE_DATA_MASK 0xff
5113 #define MDIO_PMA_REG_8727_MISC_CTRL 0x8309
5114 #define MDIO_PMA_REG_8727_TX_CTRL1 0xca02
5115 #define MDIO_PMA_REG_8727_TX_CTRL2 0xca05
5116 #define MDIO_PMA_REG_8727_PCS_OPT_CTRL 0xc808
5117 #define MDIO_PMA_REG_8727_GPIO_CTRL 0xc80e
5119 #define MDIO_PMA_REG_8073_CHIP_REV 0xc801
5120 #define MDIO_PMA_REG_8073_SPEED_LINK_STATUS 0xc820
5121 #define MDIO_PMA_REG_8073_XAUI_WA 0xc841
5123 #define MDIO_PMA_REG_7101_RESET 0xc000
5124 #define MDIO_PMA_REG_7107_LED_CNTL 0xc007
5125 #define MDIO_PMA_REG_7101_VER1 0xc026
5126 #define MDIO_PMA_REG_7101_VER2 0xc027
5128 #define MDIO_PMA_REG_8481_PMD_SIGNAL 0xa811
5129 #define MDIO_PMA_REG_8481_LED1_MASK 0xa82c
5130 #define MDIO_PMA_REG_8481_LED2_MASK 0xa82f
5131 #define MDIO_PMA_REG_8481_LED3_MASK 0xa832
5132 #define MDIO_PMA_REG_8481_LED3_BLINK 0xa834
5133 #define MDIO_PMA_REG_8481_SIGNAL_MASK 0xa835
5134 #define MDIO_PMA_REG_8481_LINK_SIGNAL 0xa83b
5137 #define MDIO_WIS_DEVAD 0x2
5139 #define MDIO_WIS_REG_LASI_CNTL 0x9002
5140 #define MDIO_WIS_REG_LASI_STATUS 0x9005
5142 #define MDIO_PCS_DEVAD 0x3
5143 #define MDIO_PCS_REG_STATUS 0x0020
5144 #define MDIO_PCS_REG_LASI_STATUS 0x9005
5145 #define MDIO_PCS_REG_7101_DSP_ACCESS 0xD000
5146 #define MDIO_PCS_REG_7101_SPI_MUX 0xD008
5147 #define MDIO_PCS_REG_7101_SPI_CTRL_ADDR 0xE12A
5148 #define MDIO_PCS_REG_7101_SPI_RESET_BIT (5)
5149 #define MDIO_PCS_REG_7101_SPI_FIFO_ADDR 0xE02A
5150 #define MDIO_PCS_REG_7101_SPI_FIFO_ADDR_WRITE_ENABLE_CMD (6)
5151 #define MDIO_PCS_REG_7101_SPI_FIFO_ADDR_BULK_ERASE_CMD (0xC7)
5152 #define MDIO_PCS_REG_7101_SPI_FIFO_ADDR_PAGE_PROGRAM_CMD (2)
5153 #define MDIO_PCS_REG_7101_SPI_BYTES_TO_TRANSFER_ADDR 0xE028
5156 #define MDIO_XS_DEVAD 0x4
5157 #define MDIO_XS_PLL_SEQUENCER 0x8000
5158 #define MDIO_XS_SFX7101_XGXS_TEST1 0xc00a
5160 #define MDIO_XS_8706_REG_BANK_RX0 0x80bc
5161 #define MDIO_XS_8706_REG_BANK_RX1 0x80cc
5162 #define MDIO_XS_8706_REG_BANK_RX2 0x80dc
5163 #define MDIO_XS_8706_REG_BANK_RX3 0x80ec
5164 #define MDIO_XS_8706_REG_BANK_RXA 0x80fc
5166 #define MDIO_AN_DEVAD 0x7
5168 #define MDIO_AN_REG_CTRL 0x0000
5169 #define MDIO_AN_REG_STATUS 0x0001
5170 #define MDIO_AN_REG_STATUS_AN_COMPLETE 0x0020
5171 #define MDIO_AN_REG_ADV_PAUSE 0x0010
5172 #define MDIO_AN_REG_ADV_PAUSE_PAUSE 0x0400
5173 #define MDIO_AN_REG_ADV_PAUSE_ASYMMETRIC 0x0800
5174 #define MDIO_AN_REG_ADV_PAUSE_BOTH 0x0C00
5175 #define MDIO_AN_REG_ADV_PAUSE_MASK 0x0C00
5176 #define MDIO_AN_REG_ADV 0x0011
5177 #define MDIO_AN_REG_ADV2 0x0012
5178 #define MDIO_AN_REG_LP_AUTO_NEG 0x0013
5179 #define MDIO_AN_REG_MASTER_STATUS 0x0021
5181 #define MDIO_AN_REG_LINK_STATUS 0x8304
5182 #define MDIO_AN_REG_CL37_CL73 0x8370
5183 #define MDIO_AN_REG_CL37_AN 0xffe0
5184 #define MDIO_AN_REG_CL37_FC_LD 0xffe4
5185 #define MDIO_AN_REG_CL37_FC_LP 0xffe5
5187 #define MDIO_AN_REG_8073_2_5G 0x8329
5189 #define MDIO_AN_REG_8481_LEGACY_MII_CTRL 0xffe0
5190 #define MDIO_AN_REG_8481_LEGACY_AN_ADV 0xffe4
5191 #define MDIO_AN_REG_8481_1000T_CTRL 0xffe9
5192 #define MDIO_AN_REG_8481_EXPANSION_REG_RD_RW 0xfff5
5193 #define MDIO_AN_REG_8481_EXPANSION_REG_ACCESS 0xfff7
5194 #define MDIO_AN_REG_8481_LEGACY_SHADOW 0xfffc
5196 #define IGU_FUNC_BASE 0x0400
5198 #define IGU_ADDR_MSIX 0x0000
5199 #define IGU_ADDR_INT_ACK 0x0200
5200 #define IGU_ADDR_PROD_UPD 0x0201
5201 #define IGU_ADDR_ATTN_BITS_UPD 0x0202
5202 #define IGU_ADDR_ATTN_BITS_SET 0x0203
5203 #define IGU_ADDR_ATTN_BITS_CLR 0x0204
5204 #define IGU_ADDR_COALESCE_NOW 0x0205
5205 #define IGU_ADDR_SIMD_MASK 0x0206
5206 #define IGU_ADDR_SIMD_NOMASK 0x0207
5207 #define IGU_ADDR_MSI_CTL 0x0210
5208 #define IGU_ADDR_MSI_ADDR_LO 0x0211
5209 #define IGU_ADDR_MSI_ADDR_HI 0x0212
5210 #define IGU_ADDR_MSI_DATA 0x0213
5212 #define IGU_INT_ENABLE 0
5213 #define IGU_INT_DISABLE 1
5214 #define IGU_INT_NOP 2
5215 #define IGU_INT_NOP2 3
5217 #define COMMAND_REG_INT_ACK 0x0
5218 #define COMMAND_REG_PROD_UPD 0x4
5219 #define COMMAND_REG_ATTN_BITS_UPD 0x8
5220 #define COMMAND_REG_ATTN_BITS_SET 0xc
5221 #define COMMAND_REG_ATTN_BITS_CLR 0x10
5222 #define COMMAND_REG_COALESCE_NOW 0x14
5223 #define COMMAND_REG_SIMD_MASK 0x18
5224 #define COMMAND_REG_SIMD_NOMASK 0x1c
5227 #define IGU_MEM_BASE 0x0000
5229 #define IGU_MEM_MSIX_BASE 0x0000
5230 #define IGU_MEM_MSIX_UPPER 0x007f
5231 #define IGU_MEM_MSIX_RESERVED_UPPER 0x01ff
5233 #define IGU_MEM_PBA_MSIX_BASE 0x0200
5234 #define IGU_MEM_PBA_MSIX_UPPER 0x0200
5236 #define IGU_CMD_BACKWARD_COMP_PROD_UPD 0x0201
5237 #define IGU_MEM_PBA_MSIX_RESERVED_UPPER 0x03ff
5239 #define IGU_CMD_INT_ACK_BASE 0x0400
5240 #define IGU_CMD_INT_ACK_UPPER\
5241 (IGU_CMD_INT_ACK_BASE + MAX_SB_PER_PORT * NUM_OF_PORTS_PER_PATH - 1)
5242 #define IGU_CMD_INT_ACK_RESERVED_UPPER 0x04ff
5244 #define IGU_CMD_E2_PROD_UPD_BASE 0x0500
5245 #define IGU_CMD_E2_PROD_UPD_UPPER\
5246 (IGU_CMD_E2_PROD_UPD_BASE + MAX_SB_PER_PORT * NUM_OF_PORTS_PER_PATH - 1)
5247 #define IGU_CMD_E2_PROD_UPD_RESERVED_UPPER 0x059f
5249 #define IGU_CMD_ATTN_BIT_UPD_UPPER 0x05a0
5250 #define IGU_CMD_ATTN_BIT_SET_UPPER 0x05a1
5251 #define IGU_CMD_ATTN_BIT_CLR_UPPER 0x05a2
5253 #define IGU_REG_SISR_MDPC_WMASK_UPPER 0x05a3
5254 #define IGU_REG_SISR_MDPC_WMASK_LSB_UPPER 0x05a4
5255 #define IGU_REG_SISR_MDPC_WMASK_MSB_UPPER 0x05a5
5256 #define IGU_REG_SISR_MDPC_WOMASK_UPPER 0x05a6
5258 #define IGU_REG_RESERVED_UPPER 0x05ff
5261 #define CDU_REGION_NUMBER_XCM_AG 2
5262 #define CDU_REGION_NUMBER_UCM_AG 4
5266 * String-to-compress [31:8] = CID (all 24 bits)
5267 * String-to-compress [7:4] = Region
5268 * String-to-compress [3:0] = Type
5270 #define CDU_VALID_DATA(_cid, _region, _type)\
5271 (((_cid) << 8) | (((_region)&0xf)<<4) | (((_type)&0xf)))
5272 #define CDU_CRC8(_cid, _region, _type)\
5273 (calc_crc8(CDU_VALID_DATA(_cid, _region, _type), 0xff))
5274 #define CDU_RSRVD_VALUE_TYPE_A(_cid, _region, _type)\
5275 (0x80 | ((CDU_CRC8(_cid, _region, _type)) & 0x7f))
5276 #define CDU_RSRVD_VALUE_TYPE_B(_crc, _type)\
5277 (0x80 | ((_type)&0xf << 3) | ((CDU_CRC8(_cid, _region, _type)) & 0x7))
5278 #define CDU_RSRVD_INVALIDATE_CONTEXT_VALUE(_val) ((_val) & ~0x80)
5280 /******************************************************************************
5282 * Calculates crc 8 on a word value: polynomial 0-1-2-8
5283 * Code was translated from Verilog.
5285 *****************************************************************************/
5286 static inline u8
calc_crc8(u32 data
, u8 crc
)
5294 /* split the data into 31 bits */
5295 for (i
= 0; i
< 32; i
++) {
5296 D
[i
] = (u8
)(data
& 1);
5300 /* split the crc into 8 bits */
5301 for (i
= 0; i
< 8; i
++) {
5306 NewCRC
[0] = D
[31] ^ D
[30] ^ D
[28] ^ D
[23] ^ D
[21] ^ D
[19] ^ D
[18] ^
5307 D
[16] ^ D
[14] ^ D
[12] ^ D
[8] ^ D
[7] ^ D
[6] ^ D
[0] ^ C
[4] ^
5309 NewCRC
[1] = D
[30] ^ D
[29] ^ D
[28] ^ D
[24] ^ D
[23] ^ D
[22] ^ D
[21] ^
5310 D
[20] ^ D
[18] ^ D
[17] ^ D
[16] ^ D
[15] ^ D
[14] ^ D
[13] ^
5311 D
[12] ^ D
[9] ^ D
[6] ^ D
[1] ^ D
[0] ^ C
[0] ^ C
[4] ^ C
[5] ^
5313 NewCRC
[2] = D
[29] ^ D
[28] ^ D
[25] ^ D
[24] ^ D
[22] ^ D
[17] ^ D
[15] ^
5314 D
[13] ^ D
[12] ^ D
[10] ^ D
[8] ^ D
[6] ^ D
[2] ^ D
[1] ^ D
[0] ^
5315 C
[0] ^ C
[1] ^ C
[4] ^ C
[5];
5316 NewCRC
[3] = D
[30] ^ D
[29] ^ D
[26] ^ D
[25] ^ D
[23] ^ D
[18] ^ D
[16] ^
5317 D
[14] ^ D
[13] ^ D
[11] ^ D
[9] ^ D
[7] ^ D
[3] ^ D
[2] ^ D
[1] ^
5318 C
[1] ^ C
[2] ^ C
[5] ^ C
[6];
5319 NewCRC
[4] = D
[31] ^ D
[30] ^ D
[27] ^ D
[26] ^ D
[24] ^ D
[19] ^ D
[17] ^
5320 D
[15] ^ D
[14] ^ D
[12] ^ D
[10] ^ D
[8] ^ D
[4] ^ D
[3] ^ D
[2] ^
5321 C
[0] ^ C
[2] ^ C
[3] ^ C
[6] ^ C
[7];
5322 NewCRC
[5] = D
[31] ^ D
[28] ^ D
[27] ^ D
[25] ^ D
[20] ^ D
[18] ^ D
[16] ^
5323 D
[15] ^ D
[13] ^ D
[11] ^ D
[9] ^ D
[5] ^ D
[4] ^ D
[3] ^ C
[1] ^
5325 NewCRC
[6] = D
[29] ^ D
[28] ^ D
[26] ^ D
[21] ^ D
[19] ^ D
[17] ^ D
[16] ^
5326 D
[14] ^ D
[12] ^ D
[10] ^ D
[6] ^ D
[5] ^ D
[4] ^ C
[2] ^ C
[4] ^
5328 NewCRC
[7] = D
[30] ^ D
[29] ^ D
[27] ^ D
[22] ^ D
[20] ^ D
[18] ^ D
[17] ^
5329 D
[15] ^ D
[13] ^ D
[11] ^ D
[7] ^ D
[6] ^ D
[5] ^ C
[3] ^ C
[5] ^
5333 for (i
= 0; i
< 8; i
++)
5334 crc_res
|= (NewCRC
[i
] << i
);
This page took 0.151978 seconds and 6 git commands to generate.