projects / deliverable / linux.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
Merge branch 'akpm-incoming-2'
[deliverable/linux.git] / drivers / net / e1000 / e1000_hw.h
1 /*******************************************************************************
2
3 Intel PRO/1000 Linux driver
4 Copyright(c) 1999 - 2006 Intel Corporation.
5
6 This program is free software; you can redistribute it and/or modify it
7 under the terms and conditions of the GNU General Public License,
8 version 2, as published by the Free Software Foundation.
9
10 This program is distributed in the hope it will be useful, but WITHOUT
11 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
13 more details.
14
15 You should have received a copy of the GNU General Public License along with
16 this program; if not, write to the Free Software Foundation, Inc.,
17 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
18
19 The full GNU General Public License is included in this distribution in
20 the file called "COPYING".
21
22 Contact Information:
23 Linux NICS <linux.nics@intel.com>
24 e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
25 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
26
27 *******************************************************************************/
28
29 /* e1000_hw.h
30 * Structures, enums, and macros for the MAC
31 */
32
33 #ifndef _E1000_HW_H_
34 #define _E1000_HW_H_
35
36 #include "e1000_osdep.h"
37
38
39 /* Forward declarations of structures used by the shared code */
40 struct e1000_hw;
41 struct e1000_hw_stats;
42
43 /* Enumerated types specific to the e1000 hardware */
44 /* Media Access Controlers */
45 typedef enum {
46 e1000_undefined = 0,
47 e1000_82542_rev2_0,
48 e1000_82542_rev2_1,
49 e1000_82543,
50 e1000_82544,
51 e1000_82540,
52 e1000_82545,
53 e1000_82545_rev_3,
54 e1000_82546,
55 e1000_82546_rev_3,
56 e1000_82541,
57 e1000_82541_rev_2,
58 e1000_82547,
59 e1000_82547_rev_2,
60 e1000_num_macs
61 } e1000_mac_type;
62
63 typedef enum {
64 e1000_eeprom_uninitialized = 0,
65 e1000_eeprom_spi,
66 e1000_eeprom_microwire,
67 e1000_eeprom_flash,
68 e1000_eeprom_none, /* No NVM support */
69 e1000_num_eeprom_types
70 } e1000_eeprom_type;
71
72 /* Media Types */
73 typedef enum {
74 e1000_media_type_copper = 0,
75 e1000_media_type_fiber = 1,
76 e1000_media_type_internal_serdes = 2,
77 e1000_num_media_types
78 } e1000_media_type;
79
80 typedef enum {
81 e1000_10_half = 0,
82 e1000_10_full = 1,
83 e1000_100_half = 2,
84 e1000_100_full = 3
85 } e1000_speed_duplex_type;
86
87 /* Flow Control Settings */
88 typedef enum {
89 E1000_FC_NONE = 0,
90 E1000_FC_RX_PAUSE = 1,
91 E1000_FC_TX_PAUSE = 2,
92 E1000_FC_FULL = 3,
93 E1000_FC_DEFAULT = 0xFF
94 } e1000_fc_type;
95
96 struct e1000_shadow_ram {
97 u16 eeprom_word;
98 bool modified;
99 };
100
101 /* PCI bus types */
102 typedef enum {
103 e1000_bus_type_unknown = 0,
104 e1000_bus_type_pci,
105 e1000_bus_type_pcix,
106 e1000_bus_type_reserved
107 } e1000_bus_type;
108
109 /* PCI bus speeds */
110 typedef enum {
111 e1000_bus_speed_unknown = 0,
112 e1000_bus_speed_33,
113 e1000_bus_speed_66,
114 e1000_bus_speed_100,
115 e1000_bus_speed_120,
116 e1000_bus_speed_133,
117 e1000_bus_speed_reserved
118 } e1000_bus_speed;
119
120 /* PCI bus widths */
121 typedef enum {
122 e1000_bus_width_unknown = 0,
123 e1000_bus_width_32,
124 e1000_bus_width_64,
125 e1000_bus_width_reserved
126 } e1000_bus_width;
127
128 /* PHY status info structure and supporting enums */
129 typedef enum {
130 e1000_cable_length_50 = 0,
131 e1000_cable_length_50_80,
132 e1000_cable_length_80_110,
133 e1000_cable_length_110_140,
134 e1000_cable_length_140,
135 e1000_cable_length_undefined = 0xFF
136 } e1000_cable_length;
137
138 typedef enum {
139 e1000_gg_cable_length_60 = 0,
140 e1000_gg_cable_length_60_115 = 1,
141 e1000_gg_cable_length_115_150 = 2,
142 e1000_gg_cable_length_150 = 4
143 } e1000_gg_cable_length;
144
145 typedef enum {
146 e1000_igp_cable_length_10 = 10,
147 e1000_igp_cable_length_20 = 20,
148 e1000_igp_cable_length_30 = 30,
149 e1000_igp_cable_length_40 = 40,
150 e1000_igp_cable_length_50 = 50,
151 e1000_igp_cable_length_60 = 60,
152 e1000_igp_cable_length_70 = 70,
153 e1000_igp_cable_length_80 = 80,
154 e1000_igp_cable_length_90 = 90,
155 e1000_igp_cable_length_100 = 100,
156 e1000_igp_cable_length_110 = 110,
157 e1000_igp_cable_length_115 = 115,
158 e1000_igp_cable_length_120 = 120,
159 e1000_igp_cable_length_130 = 130,
160 e1000_igp_cable_length_140 = 140,
161 e1000_igp_cable_length_150 = 150,
162 e1000_igp_cable_length_160 = 160,
163 e1000_igp_cable_length_170 = 170,
164 e1000_igp_cable_length_180 = 180
165 } e1000_igp_cable_length;
166
167 typedef enum {
168 e1000_10bt_ext_dist_enable_normal = 0,
169 e1000_10bt_ext_dist_enable_lower,
170 e1000_10bt_ext_dist_enable_undefined = 0xFF
171 } e1000_10bt_ext_dist_enable;
172
173 typedef enum {
174 e1000_rev_polarity_normal = 0,
175 e1000_rev_polarity_reversed,
176 e1000_rev_polarity_undefined = 0xFF
177 } e1000_rev_polarity;
178
179 typedef enum {
180 e1000_downshift_normal = 0,
181 e1000_downshift_activated,
182 e1000_downshift_undefined = 0xFF
183 } e1000_downshift;
184
185 typedef enum {
186 e1000_smart_speed_default = 0,
187 e1000_smart_speed_on,
188 e1000_smart_speed_off
189 } e1000_smart_speed;
190
191 typedef enum {
192 e1000_polarity_reversal_enabled = 0,
193 e1000_polarity_reversal_disabled,
194 e1000_polarity_reversal_undefined = 0xFF
195 } e1000_polarity_reversal;
196
197 typedef enum {
198 e1000_auto_x_mode_manual_mdi = 0,
199 e1000_auto_x_mode_manual_mdix,
200 e1000_auto_x_mode_auto1,
201 e1000_auto_x_mode_auto2,
202 e1000_auto_x_mode_undefined = 0xFF
203 } e1000_auto_x_mode;
204
205 typedef enum {
206 e1000_1000t_rx_status_not_ok = 0,
207 e1000_1000t_rx_status_ok,
208 e1000_1000t_rx_status_undefined = 0xFF
209 } e1000_1000t_rx_status;
210
211 typedef enum {
212 e1000_phy_m88 = 0,
213 e1000_phy_igp,
214 e1000_phy_undefined = 0xFF
215 } e1000_phy_type;
216
217 typedef enum {
218 e1000_ms_hw_default = 0,
219 e1000_ms_force_master,
220 e1000_ms_force_slave,
221 e1000_ms_auto
222 } e1000_ms_type;
223
224 typedef enum {
225 e1000_ffe_config_enabled = 0,
226 e1000_ffe_config_active,
227 e1000_ffe_config_blocked
228 } e1000_ffe_config;
229
230 typedef enum {
231 e1000_dsp_config_disabled = 0,
232 e1000_dsp_config_enabled,
233 e1000_dsp_config_activated,
234 e1000_dsp_config_undefined = 0xFF
235 } e1000_dsp_config;
236
237 struct e1000_phy_info {
238 e1000_cable_length cable_length;
239 e1000_10bt_ext_dist_enable extended_10bt_distance;
240 e1000_rev_polarity cable_polarity;
241 e1000_downshift downshift;
242 e1000_polarity_reversal polarity_correction;
243 e1000_auto_x_mode mdix_mode;
244 e1000_1000t_rx_status local_rx;
245 e1000_1000t_rx_status remote_rx;
246 };
247
248 struct e1000_phy_stats {
249 u32 idle_errors;
250 u32 receive_errors;
251 };
252
253 struct e1000_eeprom_info {
254 e1000_eeprom_type type;
255 u16 word_size;
256 u16 opcode_bits;
257 u16 address_bits;
258 u16 delay_usec;
259 u16 page_size;
260 };
261
262 /* Flex ASF Information */
263 #define E1000_HOST_IF_MAX_SIZE 2048
264
265 typedef enum {
266 e1000_byte_align = 0,
267 e1000_word_align = 1,
268 e1000_dword_align = 2
269 } e1000_align_type;
270
271 /* Error Codes */
272 #define E1000_SUCCESS 0
273 #define E1000_ERR_EEPROM 1
274 #define E1000_ERR_PHY 2
275 #define E1000_ERR_CONFIG 3
276 #define E1000_ERR_PARAM 4
277 #define E1000_ERR_MAC_TYPE 5
278 #define E1000_ERR_PHY_TYPE 6
279 #define E1000_ERR_RESET 9
280 #define E1000_ERR_MASTER_REQUESTS_PENDING 10
281 #define E1000_ERR_HOST_INTERFACE_COMMAND 11
282 #define E1000_BLK_PHY_RESET 12
283
284 #define E1000_BYTE_SWAP_WORD(_value) ((((_value) & 0x00ff) << 8) | \
285 (((_value) & 0xff00) >> 8))
286
287 /* Function prototypes */
288 /* Initialization */
289 s32 e1000_reset_hw(struct e1000_hw *hw);
290 s32 e1000_init_hw(struct e1000_hw *hw);
291 s32 e1000_set_mac_type(struct e1000_hw *hw);
292 void e1000_set_media_type(struct e1000_hw *hw);
293
294 /* Link Configuration */
295 s32 e1000_setup_link(struct e1000_hw *hw);
296 s32 e1000_phy_setup_autoneg(struct e1000_hw *hw);
297 void e1000_config_collision_dist(struct e1000_hw *hw);
298 s32 e1000_check_for_link(struct e1000_hw *hw);
299 s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 * speed, u16 * duplex);
300 s32 e1000_force_mac_fc(struct e1000_hw *hw);
301
302 /* PHY */
303 s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 * phy_data);
304 s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 data);
305 s32 e1000_phy_hw_reset(struct e1000_hw *hw);
306 s32 e1000_phy_reset(struct e1000_hw *hw);
307 s32 e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info);
308 s32 e1000_validate_mdi_setting(struct e1000_hw *hw);
309
310 /* EEPROM Functions */
311 s32 e1000_init_eeprom_params(struct e1000_hw *hw);
312
313 /* MNG HOST IF functions */
314 u32 e1000_enable_mng_pass_thru(struct e1000_hw *hw);
315
316 #define E1000_MNG_DHCP_TX_PAYLOAD_CMD 64
317 #define E1000_HI_MAX_MNG_DATA_LENGTH 0x6F8 /* Host Interface data length */
318
319 #define E1000_MNG_DHCP_COMMAND_TIMEOUT 10 /* Time in ms to process MNG command */
320 #define E1000_MNG_DHCP_COOKIE_OFFSET 0x6F0 /* Cookie offset */
321 #define E1000_MNG_DHCP_COOKIE_LENGTH 0x10 /* Cookie length */
322 #define E1000_MNG_IAMT_MODE 0x3
323 #define E1000_MNG_ICH_IAMT_MODE 0x2
324 #define E1000_IAMT_SIGNATURE 0x544D4149 /* Intel(R) Active Management Technology signature */
325
326 #define E1000_MNG_DHCP_COOKIE_STATUS_PARSING_SUPPORT 0x1 /* DHCP parsing enabled */
327 #define E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT 0x2 /* DHCP parsing enabled */
328 #define E1000_VFTA_ENTRY_SHIFT 0x5
329 #define E1000_VFTA_ENTRY_MASK 0x7F
330 #define E1000_VFTA_ENTRY_BIT_SHIFT_MASK 0x1F
331
332 struct e1000_host_mng_command_header {
333 u8 command_id;
334 u8 checksum;
335 u16 reserved1;
336 u16 reserved2;
337 u16 command_length;
338 };
339
340 struct e1000_host_mng_command_info {
341 struct e1000_host_mng_command_header command_header; /* Command Head/Command Result Head has 4 bytes */
342 u8 command_data[E1000_HI_MAX_MNG_DATA_LENGTH]; /* Command data can length 0..0x658 */
343 };
344 #ifdef __BIG_ENDIAN
345 struct e1000_host_mng_dhcp_cookie {
346 u32 signature;
347 u16 vlan_id;
348 u8 reserved0;
349 u8 status;
350 u32 reserved1;
351 u8 checksum;
352 u8 reserved3;
353 u16 reserved2;
354 };
355 #else
356 struct e1000_host_mng_dhcp_cookie {
357 u32 signature;
358 u8 status;
359 u8 reserved0;
360 u16 vlan_id;
361 u32 reserved1;
362 u16 reserved2;
363 u8 reserved3;
364 u8 checksum;
365 };
366 #endif
367
368 bool e1000_check_mng_mode(struct e1000_hw *hw);
369 s32 e1000_read_eeprom(struct e1000_hw *hw, u16 reg, u16 words, u16 * data);
370 s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw);
371 s32 e1000_update_eeprom_checksum(struct e1000_hw *hw);
372 s32 e1000_write_eeprom(struct e1000_hw *hw, u16 reg, u16 words, u16 * data);
373 s32 e1000_read_mac_addr(struct e1000_hw *hw);
374
375 /* Filters (multicast, vlan, receive) */
376 u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 * mc_addr);
377 void e1000_mta_set(struct e1000_hw *hw, u32 hash_value);
378 void e1000_rar_set(struct e1000_hw *hw, u8 * mc_addr, u32 rar_index);
379 void e1000_write_vfta(struct e1000_hw *hw, u32 offset, u32 value);
380
381 /* LED functions */
382 s32 e1000_setup_led(struct e1000_hw *hw);
383 s32 e1000_cleanup_led(struct e1000_hw *hw);
384 s32 e1000_led_on(struct e1000_hw *hw);
385 s32 e1000_led_off(struct e1000_hw *hw);
386 s32 e1000_blink_led_start(struct e1000_hw *hw);
387
388 /* Adaptive IFS Functions */
389
390 /* Everything else */
391 void e1000_reset_adaptive(struct e1000_hw *hw);
392 void e1000_update_adaptive(struct e1000_hw *hw);
393 void e1000_tbi_adjust_stats(struct e1000_hw *hw, struct e1000_hw_stats *stats,
394 u32 frame_len, u8 * mac_addr);
395 void e1000_get_bus_info(struct e1000_hw *hw);
396 void e1000_pci_set_mwi(struct e1000_hw *hw);
397 void e1000_pci_clear_mwi(struct e1000_hw *hw);
398 void e1000_pcix_set_mmrbc(struct e1000_hw *hw, int mmrbc);
399 int e1000_pcix_get_mmrbc(struct e1000_hw *hw);
400 /* Port I/O is only supported on 82544 and newer */
401 void e1000_io_write(struct e1000_hw *hw, unsigned long port, u32 value);
402
403 #define E1000_READ_REG_IO(a, reg) \
404 e1000_read_reg_io((a), E1000_##reg)
405 #define E1000_WRITE_REG_IO(a, reg, val) \
406 e1000_write_reg_io((a), E1000_##reg, val)
407
408 /* PCI Device IDs */
409 #define E1000_DEV_ID_82542 0x1000
410 #define E1000_DEV_ID_82543GC_FIBER 0x1001
411 #define E1000_DEV_ID_82543GC_COPPER 0x1004
412 #define E1000_DEV_ID_82544EI_COPPER 0x1008
413 #define E1000_DEV_ID_82544EI_FIBER 0x1009
414 #define E1000_DEV_ID_82544GC_COPPER 0x100C
415 #define E1000_DEV_ID_82544GC_LOM 0x100D
416 #define E1000_DEV_ID_82540EM 0x100E
417 #define E1000_DEV_ID_82540EM_LOM 0x1015
418 #define E1000_DEV_ID_82540EP_LOM 0x1016
419 #define E1000_DEV_ID_82540EP 0x1017
420 #define E1000_DEV_ID_82540EP_LP 0x101E
421 #define E1000_DEV_ID_82545EM_COPPER 0x100F
422 #define E1000_DEV_ID_82545EM_FIBER 0x1011
423 #define E1000_DEV_ID_82545GM_COPPER 0x1026
424 #define E1000_DEV_ID_82545GM_FIBER 0x1027
425 #define E1000_DEV_ID_82545GM_SERDES 0x1028
426 #define E1000_DEV_ID_82546EB_COPPER 0x1010
427 #define E1000_DEV_ID_82546EB_FIBER 0x1012
428 #define E1000_DEV_ID_82546EB_QUAD_COPPER 0x101D
429 #define E1000_DEV_ID_82541EI 0x1013
430 #define E1000_DEV_ID_82541EI_MOBILE 0x1018
431 #define E1000_DEV_ID_82541ER_LOM 0x1014
432 #define E1000_DEV_ID_82541ER 0x1078
433 #define E1000_DEV_ID_82547GI 0x1075
434 #define E1000_DEV_ID_82541GI 0x1076
435 #define E1000_DEV_ID_82541GI_MOBILE 0x1077
436 #define E1000_DEV_ID_82541GI_LF 0x107C
437 #define E1000_DEV_ID_82546GB_COPPER 0x1079
438 #define E1000_DEV_ID_82546GB_FIBER 0x107A
439 #define E1000_DEV_ID_82546GB_SERDES 0x107B
440 #define E1000_DEV_ID_82546GB_PCIE 0x108A
441 #define E1000_DEV_ID_82546GB_QUAD_COPPER 0x1099
442 #define E1000_DEV_ID_82547EI 0x1019
443 #define E1000_DEV_ID_82547EI_MOBILE 0x101A
444 #define E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3 0x10B5
445
446 #define NODE_ADDRESS_SIZE 6
447 #define ETH_LENGTH_OF_ADDRESS 6
448
449 /* MAC decode size is 128K - This is the size of BAR0 */
450 #define MAC_DECODE_SIZE (128 * 1024)
451
452 #define E1000_82542_2_0_REV_ID 2
453 #define E1000_82542_2_1_REV_ID 3
454 #define E1000_REVISION_0 0
455 #define E1000_REVISION_1 1
456 #define E1000_REVISION_2 2
457 #define E1000_REVISION_3 3
458
459 #define SPEED_10 10
460 #define SPEED_100 100
461 #define SPEED_1000 1000
462 #define HALF_DUPLEX 1
463 #define FULL_DUPLEX 2
464
465 /* The sizes (in bytes) of a ethernet packet */
466 #define ENET_HEADER_SIZE 14
467 #define MINIMUM_ETHERNET_FRAME_SIZE 64 /* With FCS */
468 #define ETHERNET_FCS_SIZE 4
469 #define MINIMUM_ETHERNET_PACKET_SIZE \
470 (MINIMUM_ETHERNET_FRAME_SIZE - ETHERNET_FCS_SIZE)
471 #define CRC_LENGTH ETHERNET_FCS_SIZE
472 #define MAX_JUMBO_FRAME_SIZE 0x3F00
473
474 /* 802.1q VLAN Packet Sizes */
475 #define VLAN_TAG_SIZE 4 /* 802.3ac tag (not DMAed) */
476
477 /* Ethertype field values */
478 #define ETHERNET_IEEE_VLAN_TYPE 0x8100 /* 802.3ac packet */
479 #define ETHERNET_IP_TYPE 0x0800 /* IP packets */
480 #define ETHERNET_ARP_TYPE 0x0806 /* Address Resolution Protocol (ARP) */
481
482 /* Packet Header defines */
483 #define IP_PROTOCOL_TCP 6
484 #define IP_PROTOCOL_UDP 0x11
485
486 /* This defines the bits that are set in the Interrupt Mask
487 * Set/Read Register. Each bit is documented below:
488 * o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0)
489 * o RXSEQ = Receive Sequence Error
490 */
491 #define POLL_IMS_ENABLE_MASK ( \
492 E1000_IMS_RXDMT0 | \
493 E1000_IMS_RXSEQ)
494
495 /* This defines the bits that are set in the Interrupt Mask
496 * Set/Read Register. Each bit is documented below:
497 * o RXT0 = Receiver Timer Interrupt (ring 0)
498 * o TXDW = Transmit Descriptor Written Back
499 * o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0)
500 * o RXSEQ = Receive Sequence Error
501 * o LSC = Link Status Change
502 */
503 #define IMS_ENABLE_MASK ( \
504 E1000_IMS_RXT0 | \
505 E1000_IMS_TXDW | \
506 E1000_IMS_RXDMT0 | \
507 E1000_IMS_RXSEQ | \
508 E1000_IMS_LSC)
509
510 /* Number of high/low register pairs in the RAR. The RAR (Receive Address
511 * Registers) holds the directed and multicast addresses that we monitor. We
512 * reserve one of these spots for our directed address, allowing us room for
513 * E1000_RAR_ENTRIES - 1 multicast addresses.
514 */
515 #define E1000_RAR_ENTRIES 15
516
517 #define MIN_NUMBER_OF_DESCRIPTORS 8
518 #define MAX_NUMBER_OF_DESCRIPTORS 0xFFF8
519
520 /* Receive Descriptor */
521 struct e1000_rx_desc {
522 __le64 buffer_addr; /* Address of the descriptor's data buffer */
523 __le16 length; /* Length of data DMAed into data buffer */
524 __le16 csum; /* Packet checksum */
525 u8 status; /* Descriptor status */
526 u8 errors; /* Descriptor Errors */
527 __le16 special;
528 };
529
530 /* Receive Descriptor - Extended */
531 union e1000_rx_desc_extended {
532 struct {
533 __le64 buffer_addr;
534 __le64 reserved;
535 } read;
536 struct {
537 struct {
538 __le32 mrq; /* Multiple Rx Queues */
539 union {
540 __le32 rss; /* RSS Hash */
541 struct {
542 __le16 ip_id; /* IP id */
543 __le16 csum; /* Packet Checksum */
544 } csum_ip;
545 } hi_dword;
546 } lower;
547 struct {
548 __le32 status_error; /* ext status/error */
549 __le16 length;
550 __le16 vlan; /* VLAN tag */
551 } upper;
552 } wb; /* writeback */
553 };
554
555 #define MAX_PS_BUFFERS 4
556 /* Receive Descriptor - Packet Split */
557 union e1000_rx_desc_packet_split {
558 struct {
559 /* one buffer for protocol header(s), three data buffers */
560 __le64 buffer_addr[MAX_PS_BUFFERS];
561 } read;
562 struct {
563 struct {
564 __le32 mrq; /* Multiple Rx Queues */
565 union {
566 __le32 rss; /* RSS Hash */
567 struct {
568 __le16 ip_id; /* IP id */
569 __le16 csum; /* Packet Checksum */
570 } csum_ip;
571 } hi_dword;
572 } lower;
573 struct {
574 __le32 status_error; /* ext status/error */
575 __le16 length0; /* length of buffer 0 */
576 __le16 vlan; /* VLAN tag */
577 } middle;
578 struct {
579 __le16 header_status;
580 __le16 length[3]; /* length of buffers 1-3 */
581 } upper;
582 __le64 reserved;
583 } wb; /* writeback */
584 };
585
586 /* Receive Descriptor bit definitions */
587 #define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */
588 #define E1000_RXD_STAT_EOP 0x02 /* End of Packet */
589 #define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */
590 #define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */
591 #define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum calculated */
592 #define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */
593 #define E1000_RXD_STAT_IPCS 0x40 /* IP xsum calculated */
594 #define E1000_RXD_STAT_PIF 0x80 /* passed in-exact filter */
595 #define E1000_RXD_STAT_IPIDV 0x200 /* IP identification valid */
596 #define E1000_RXD_STAT_UDPV 0x400 /* Valid UDP checksum */
597 #define E1000_RXD_STAT_ACK 0x8000 /* ACK Packet indication */
598 #define E1000_RXD_ERR_CE 0x01 /* CRC Error */
599 #define E1000_RXD_ERR_SE 0x02 /* Symbol Error */
600 #define E1000_RXD_ERR_SEQ 0x04 /* Sequence Error */
601 #define E1000_RXD_ERR_CXE 0x10 /* Carrier Extension Error */
602 #define E1000_RXD_ERR_TCPE 0x20 /* TCP/UDP Checksum Error */
603 #define E1000_RXD_ERR_IPE 0x40 /* IP Checksum Error */
604 #define E1000_RXD_ERR_RXE 0x80 /* Rx Data Error */
605 #define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */
606 #define E1000_RXD_SPC_PRI_MASK 0xE000 /* Priority is in upper 3 bits */
607 #define E1000_RXD_SPC_PRI_SHIFT 13
608 #define E1000_RXD_SPC_CFI_MASK 0x1000 /* CFI is bit 12 */
609 #define E1000_RXD_SPC_CFI_SHIFT 12
610
611 #define E1000_RXDEXT_STATERR_CE 0x01000000
612 #define E1000_RXDEXT_STATERR_SE 0x02000000
613 #define E1000_RXDEXT_STATERR_SEQ 0x04000000
614 #define E1000_RXDEXT_STATERR_CXE 0x10000000
615 #define E1000_RXDEXT_STATERR_TCPE 0x20000000
616 #define E1000_RXDEXT_STATERR_IPE 0x40000000
617 #define E1000_RXDEXT_STATERR_RXE 0x80000000
618
619 #define E1000_RXDPS_HDRSTAT_HDRSP 0x00008000
620 #define E1000_RXDPS_HDRSTAT_HDRLEN_MASK 0x000003FF
621
622 /* mask to determine if packets should be dropped due to frame errors */
623 #define E1000_RXD_ERR_FRAME_ERR_MASK ( \
624 E1000_RXD_ERR_CE | \
625 E1000_RXD_ERR_SE | \
626 E1000_RXD_ERR_SEQ | \
627 E1000_RXD_ERR_CXE | \
628 E1000_RXD_ERR_RXE)
629
630 /* Same mask, but for extended and packet split descriptors */
631 #define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \
632 E1000_RXDEXT_STATERR_CE | \
633 E1000_RXDEXT_STATERR_SE | \
634 E1000_RXDEXT_STATERR_SEQ | \
635 E1000_RXDEXT_STATERR_CXE | \
636 E1000_RXDEXT_STATERR_RXE)
637
638 /* Transmit Descriptor */
639 struct e1000_tx_desc {
640 __le64 buffer_addr; /* Address of the descriptor's data buffer */
641 union {
642 __le32 data;
643 struct {
644 __le16 length; /* Data buffer length */
645 u8 cso; /* Checksum offset */
646 u8 cmd; /* Descriptor control */
647 } flags;
648 } lower;
649 union {
650 __le32 data;
651 struct {
652 u8 status; /* Descriptor status */
653 u8 css; /* Checksum start */
654 __le16 special;
655 } fields;
656 } upper;
657 };
658
659 /* Transmit Descriptor bit definitions */
660 #define E1000_TXD_DTYP_D 0x00100000 /* Data Descriptor */
661 #define E1000_TXD_DTYP_C 0x00000000 /* Context Descriptor */
662 #define E1000_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */
663 #define E1000_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */
664 #define E1000_TXD_CMD_EOP 0x01000000 /* End of Packet */
665 #define E1000_TXD_CMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */
666 #define E1000_TXD_CMD_IC 0x04000000 /* Insert Checksum */
667 #define E1000_TXD_CMD_RS 0x08000000 /* Report Status */
668 #define E1000_TXD_CMD_RPS 0x10000000 /* Report Packet Sent */
669 #define E1000_TXD_CMD_DEXT 0x20000000 /* Descriptor extension (0 = legacy) */
670 #define E1000_TXD_CMD_VLE 0x40000000 /* Add VLAN tag */
671 #define E1000_TXD_CMD_IDE 0x80000000 /* Enable Tidv register */
672 #define E1000_TXD_STAT_DD 0x00000001 /* Descriptor Done */
673 #define E1000_TXD_STAT_EC 0x00000002 /* Excess Collisions */
674 #define E1000_TXD_STAT_LC 0x00000004 /* Late Collisions */
675 #define E1000_TXD_STAT_TU 0x00000008 /* Transmit underrun */
676 #define E1000_TXD_CMD_TCP 0x01000000 /* TCP packet */
677 #define E1000_TXD_CMD_IP 0x02000000 /* IP packet */
678 #define E1000_TXD_CMD_TSE 0x04000000 /* TCP Seg enable */
679 #define E1000_TXD_STAT_TC 0x00000004 /* Tx Underrun */
680
681 /* Offload Context Descriptor */
682 struct e1000_context_desc {
683 union {
684 __le32 ip_config;
685 struct {
686 u8 ipcss; /* IP checksum start */
687 u8 ipcso; /* IP checksum offset */
688 __le16 ipcse; /* IP checksum end */
689 } ip_fields;
690 } lower_setup;
691 union {
692 __le32 tcp_config;
693 struct {
694 u8 tucss; /* TCP checksum start */
695 u8 tucso; /* TCP checksum offset */
696 __le16 tucse; /* TCP checksum end */
697 } tcp_fields;
698 } upper_setup;
699 __le32 cmd_and_length; /* */
700 union {
701 __le32 data;
702 struct {
703 u8 status; /* Descriptor status */
704 u8 hdr_len; /* Header length */
705 __le16 mss; /* Maximum segment size */
706 } fields;
707 } tcp_seg_setup;
708 };
709
710 /* Offload data descriptor */
711 struct e1000_data_desc {
712 __le64 buffer_addr; /* Address of the descriptor's buffer address */
713 union {
714 __le32 data;
715 struct {
716 __le16 length; /* Data buffer length */
717 u8 typ_len_ext; /* */
718 u8 cmd; /* */
719 } flags;
720 } lower;
721 union {
722 __le32 data;
723 struct {
724 u8 status; /* Descriptor status */
725 u8 popts; /* Packet Options */
726 __le16 special; /* */
727 } fields;
728 } upper;
729 };
730
731 /* Filters */
732 #define E1000_NUM_UNICAST 16 /* Unicast filter entries */
733 #define E1000_MC_TBL_SIZE 128 /* Multicast Filter Table (4096 bits) */
734 #define E1000_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */
735
736 /* Receive Address Register */
737 struct e1000_rar {
738 volatile __le32 low; /* receive address low */
739 volatile __le32 high; /* receive address high */
740 };
741
742 /* Number of entries in the Multicast Table Array (MTA). */
743 #define E1000_NUM_MTA_REGISTERS 128
744
745 /* IPv4 Address Table Entry */
746 struct e1000_ipv4_at_entry {
747 volatile u32 ipv4_addr; /* IP Address (RW) */
748 volatile u32 reserved;
749 };
750
751 /* Four wakeup IP addresses are supported */
752 #define E1000_WAKEUP_IP_ADDRESS_COUNT_MAX 4
753 #define E1000_IP4AT_SIZE E1000_WAKEUP_IP_ADDRESS_COUNT_MAX
754 #define E1000_IP6AT_SIZE 1
755
756 /* IPv6 Address Table Entry */
757 struct e1000_ipv6_at_entry {
758 volatile u8 ipv6_addr[16];
759 };
760
761 /* Flexible Filter Length Table Entry */
762 struct e1000_fflt_entry {
763 volatile u32 length; /* Flexible Filter Length (RW) */
764 volatile u32 reserved;
765 };
766
767 /* Flexible Filter Mask Table Entry */
768 struct e1000_ffmt_entry {
769 volatile u32 mask; /* Flexible Filter Mask (RW) */
770 volatile u32 reserved;
771 };
772
773 /* Flexible Filter Value Table Entry */
774 struct e1000_ffvt_entry {
775 volatile u32 value; /* Flexible Filter Value (RW) */
776 volatile u32 reserved;
777 };
778
779 /* Four Flexible Filters are supported */
780 #define E1000_FLEXIBLE_FILTER_COUNT_MAX 4
781
782 /* Each Flexible Filter is at most 128 (0x80) bytes in length */
783 #define E1000_FLEXIBLE_FILTER_SIZE_MAX 128
784
785 #define E1000_FFLT_SIZE E1000_FLEXIBLE_FILTER_COUNT_MAX
786 #define E1000_FFMT_SIZE E1000_FLEXIBLE_FILTER_SIZE_MAX
787 #define E1000_FFVT_SIZE E1000_FLEXIBLE_FILTER_SIZE_MAX
788
789 #define E1000_DISABLE_SERDES_LOOPBACK 0x0400
790
791 /* Register Set. (82543, 82544)
792 *
793 * Registers are defined to be 32 bits and should be accessed as 32 bit values.
794 * These registers are physically located on the NIC, but are mapped into the
795 * host memory address space.
796 *
797 * RW - register is both readable and writable
798 * RO - register is read only
799 * WO - register is write only
800 * R/clr - register is read only and is cleared when read
801 * A - register array
802 */
803 #define E1000_CTRL 0x00000 /* Device Control - RW */
804 #define E1000_CTRL_DUP 0x00004 /* Device Control Duplicate (Shadow) - RW */
805 #define E1000_STATUS 0x00008 /* Device Status - RO */
806 #define E1000_EECD 0x00010 /* EEPROM/Flash Control - RW */
807 #define E1000_EERD 0x00014 /* EEPROM Read - RW */
808 #define E1000_CTRL_EXT 0x00018 /* Extended Device Control - RW */
809 #define E1000_FLA 0x0001C /* Flash Access - RW */
810 #define E1000_MDIC 0x00020 /* MDI Control - RW */
811 #define E1000_SCTL 0x00024 /* SerDes Control - RW */
812 #define E1000_FEXTNVM 0x00028 /* Future Extended NVM register */
813 #define E1000_FCAL 0x00028 /* Flow Control Address Low - RW */
814 #define E1000_FCAH 0x0002C /* Flow Control Address High -RW */
815 #define E1000_FCT 0x00030 /* Flow Control Type - RW */
816 #define E1000_VET 0x00038 /* VLAN Ether Type - RW */
817 #define E1000_ICR 0x000C0 /* Interrupt Cause Read - R/clr */
818 #define E1000_ITR 0x000C4 /* Interrupt Throttling Rate - RW */
819 #define E1000_ICS 0x000C8 /* Interrupt Cause Set - WO */
820 #define E1000_IMS 0x000D0 /* Interrupt Mask Set - RW */
821 #define E1000_IMC 0x000D8 /* Interrupt Mask Clear - WO */
822 #define E1000_IAM 0x000E0 /* Interrupt Acknowledge Auto Mask */
823 #define E1000_RCTL 0x00100 /* RX Control - RW */
824 #define E1000_RDTR1 0x02820 /* RX Delay Timer (1) - RW */
825 #define E1000_RDBAL1 0x02900 /* RX Descriptor Base Address Low (1) - RW */
826 #define E1000_RDBAH1 0x02904 /* RX Descriptor Base Address High (1) - RW */
827 #define E1000_RDLEN1 0x02908 /* RX Descriptor Length (1) - RW */
828 #define E1000_RDH1 0x02910 /* RX Descriptor Head (1) - RW */
829 #define E1000_RDT1 0x02918 /* RX Descriptor Tail (1) - RW */
830 #define E1000_FCTTV 0x00170 /* Flow Control Transmit Timer Value - RW */
831 #define E1000_TXCW 0x00178 /* TX Configuration Word - RW */
832 #define E1000_RXCW 0x00180 /* RX Configuration Word - RO */
833 #define E1000_TCTL 0x00400 /* TX Control - RW */
834 #define E1000_TCTL_EXT 0x00404 /* Extended TX Control - RW */
835 #define E1000_TIPG 0x00410 /* TX Inter-packet gap -RW */
836 #define E1000_TBT 0x00448 /* TX Burst Timer - RW */
837 #define E1000_AIT 0x00458 /* Adaptive Interframe Spacing Throttle - RW */
838 #define E1000_LEDCTL 0x00E00 /* LED Control - RW */
839 #define E1000_EXTCNF_CTRL 0x00F00 /* Extended Configuration Control */
840 #define E1000_EXTCNF_SIZE 0x00F08 /* Extended Configuration Size */
841 #define E1000_PHY_CTRL 0x00F10 /* PHY Control Register in CSR */
842 #define FEXTNVM_SW_CONFIG 0x0001
843 #define E1000_PBA 0x01000 /* Packet Buffer Allocation - RW */
844 #define E1000_PBS 0x01008 /* Packet Buffer Size */
845 #define E1000_EEMNGCTL 0x01010 /* MNG EEprom Control */
846 #define E1000_FLASH_UPDATES 1000
847 #define E1000_EEARBC 0x01024 /* EEPROM Auto Read Bus Control */
848 #define E1000_FLASHT 0x01028 /* FLASH Timer Register */
849 #define E1000_EEWR 0x0102C /* EEPROM Write Register - RW */
850 #define E1000_FLSWCTL 0x01030 /* FLASH control register */
851 #define E1000_FLSWDATA 0x01034 /* FLASH data register */
852 #define E1000_FLSWCNT 0x01038 /* FLASH Access Counter */
853 #define E1000_FLOP 0x0103C /* FLASH Opcode Register */
854 #define E1000_ERT 0x02008 /* Early Rx Threshold - RW */
855 #define E1000_FCRTL 0x02160 /* Flow Control Receive Threshold Low - RW */
856 #define E1000_FCRTH 0x02168 /* Flow Control Receive Threshold High - RW */
857 #define E1000_PSRCTL 0x02170 /* Packet Split Receive Control - RW */
858 #define E1000_RDBAL 0x02800 /* RX Descriptor Base Address Low - RW */
859 #define E1000_RDBAH 0x02804 /* RX Descriptor Base Address High - RW */
860 #define E1000_RDLEN 0x02808 /* RX Descriptor Length - RW */
861 #define E1000_RDH 0x02810 /* RX Descriptor Head - RW */
862 #define E1000_RDT 0x02818 /* RX Descriptor Tail - RW */
863 #define E1000_RDTR 0x02820 /* RX Delay Timer - RW */
864 #define E1000_RDBAL0 E1000_RDBAL /* RX Desc Base Address Low (0) - RW */
865 #define E1000_RDBAH0 E1000_RDBAH /* RX Desc Base Address High (0) - RW */
866 #define E1000_RDLEN0 E1000_RDLEN /* RX Desc Length (0) - RW */
867 #define E1000_RDH0 E1000_RDH /* RX Desc Head (0) - RW */
868 #define E1000_RDT0 E1000_RDT /* RX Desc Tail (0) - RW */
869 #define E1000_RDTR0 E1000_RDTR /* RX Delay Timer (0) - RW */
870 #define E1000_RXDCTL 0x02828 /* RX Descriptor Control queue 0 - RW */
871 #define E1000_RXDCTL1 0x02928 /* RX Descriptor Control queue 1 - RW */
872 #define E1000_RADV 0x0282C /* RX Interrupt Absolute Delay Timer - RW */
873 #define E1000_RSRPD 0x02C00 /* RX Small Packet Detect - RW */
874 #define E1000_RAID 0x02C08 /* Receive Ack Interrupt Delay - RW */
875 #define E1000_TXDMAC 0x03000 /* TX DMA Control - RW */
876 #define E1000_KABGTXD 0x03004 /* AFE Band Gap Transmit Ref Data */
877 #define E1000_TDFH 0x03410 /* TX Data FIFO Head - RW */
878 #define E1000_TDFT 0x03418 /* TX Data FIFO Tail - RW */
879 #define E1000_TDFHS 0x03420 /* TX Data FIFO Head Saved - RW */
880 #define E1000_TDFTS 0x03428 /* TX Data FIFO Tail Saved - RW */
881 #define E1000_TDFPC 0x03430 /* TX Data FIFO Packet Count - RW */
882 #define E1000_TDBAL 0x03800 /* TX Descriptor Base Address Low - RW */
883 #define E1000_TDBAH 0x03804 /* TX Descriptor Base Address High - RW */
884 #define E1000_TDLEN 0x03808 /* TX Descriptor Length - RW */
885 #define E1000_TDH 0x03810 /* TX Descriptor Head - RW */
886 #define E1000_TDT 0x03818 /* TX Descripotr Tail - RW */
887 #define E1000_TIDV 0x03820 /* TX Interrupt Delay Value - RW */
888 #define E1000_TXDCTL 0x03828 /* TX Descriptor Control - RW */
889 #define E1000_TADV 0x0382C /* TX Interrupt Absolute Delay Val - RW */
890 #define E1000_TSPMT 0x03830 /* TCP Segmentation PAD & Min Threshold - RW */
891 #define E1000_TARC0 0x03840 /* TX Arbitration Count (0) */
892 #define E1000_TDBAL1 0x03900 /* TX Desc Base Address Low (1) - RW */
893 #define E1000_TDBAH1 0x03904 /* TX Desc Base Address High (1) - RW */
894 #define E1000_TDLEN1 0x03908 /* TX Desc Length (1) - RW */
895 #define E1000_TDH1 0x03910 /* TX Desc Head (1) - RW */
896 #define E1000_TDT1 0x03918 /* TX Desc Tail (1) - RW */
897 #define E1000_TXDCTL1 0x03928 /* TX Descriptor Control (1) - RW */
898 #define E1000_TARC1 0x03940 /* TX Arbitration Count (1) */
899 #define E1000_CRCERRS 0x04000 /* CRC Error Count - R/clr */
900 #define E1000_ALGNERRC 0x04004 /* Alignment Error Count - R/clr */
901 #define E1000_SYMERRS 0x04008 /* Symbol Error Count - R/clr */
902 #define E1000_RXERRC 0x0400C /* Receive Error Count - R/clr */
903 #define E1000_MPC 0x04010 /* Missed Packet Count - R/clr */
904 #define E1000_SCC 0x04014 /* Single Collision Count - R/clr */
905 #define E1000_ECOL 0x04018 /* Excessive Collision Count - R/clr */
906 #define E1000_MCC 0x0401C /* Multiple Collision Count - R/clr */
907 #define E1000_LATECOL 0x04020 /* Late Collision Count - R/clr */
908 #define E1000_COLC 0x04028 /* Collision Count - R/clr */
909 #define E1000_DC 0x04030 /* Defer Count - R/clr */
910 #define E1000_TNCRS 0x04034 /* TX-No CRS - R/clr */
911 #define E1000_SEC 0x04038 /* Sequence Error Count - R/clr */
912 #define E1000_CEXTERR 0x0403C /* Carrier Extension Error Count - R/clr */
913 #define E1000_RLEC 0x04040 /* Receive Length Error Count - R/clr */
914 #define E1000_XONRXC 0x04048 /* XON RX Count - R/clr */
915 #define E1000_XONTXC 0x0404C /* XON TX Count - R/clr */
916 #define E1000_XOFFRXC 0x04050 /* XOFF RX Count - R/clr */
917 #define E1000_XOFFTXC 0x04054 /* XOFF TX Count - R/clr */
918 #define E1000_FCRUC 0x04058 /* Flow Control RX Unsupported Count- R/clr */
919 #define E1000_PRC64 0x0405C /* Packets RX (64 bytes) - R/clr */
920 #define E1000_PRC127 0x04060 /* Packets RX (65-127 bytes) - R/clr */
921 #define E1000_PRC255 0x04064 /* Packets RX (128-255 bytes) - R/clr */
922 #define E1000_PRC511 0x04068 /* Packets RX (255-511 bytes) - R/clr */
923 #define E1000_PRC1023 0x0406C /* Packets RX (512-1023 bytes) - R/clr */
924 #define E1000_PRC1522 0x04070 /* Packets RX (1024-1522 bytes) - R/clr */
925 #define E1000_GPRC 0x04074 /* Good Packets RX Count - R/clr */
926 #define E1000_BPRC 0x04078 /* Broadcast Packets RX Count - R/clr */
927 #define E1000_MPRC 0x0407C /* Multicast Packets RX Count - R/clr */
928 #define E1000_GPTC 0x04080 /* Good Packets TX Count - R/clr */
929 #define E1000_GORCL 0x04088 /* Good Octets RX Count Low - R/clr */
930 #define E1000_GORCH 0x0408C /* Good Octets RX Count High - R/clr */
931 #define E1000_GOTCL 0x04090 /* Good Octets TX Count Low - R/clr */
932 #define E1000_GOTCH 0x04094 /* Good Octets TX Count High - R/clr */
933 #define E1000_RNBC 0x040A0 /* RX No Buffers Count - R/clr */
934 #define E1000_RUC 0x040A4 /* RX Undersize Count - R/clr */
935 #define E1000_RFC 0x040A8 /* RX Fragment Count - R/clr */
936 #define E1000_ROC 0x040AC /* RX Oversize Count - R/clr */
937 #define E1000_RJC 0x040B0 /* RX Jabber Count - R/clr */
938 #define E1000_MGTPRC 0x040B4 /* Management Packets RX Count - R/clr */
939 #define E1000_MGTPDC 0x040B8 /* Management Packets Dropped Count - R/clr */
940 #define E1000_MGTPTC 0x040BC /* Management Packets TX Count - R/clr */
941 #define E1000_TORL 0x040C0 /* Total Octets RX Low - R/clr */
942 #define E1000_TORH 0x040C4 /* Total Octets RX High - R/clr */
943 #define E1000_TOTL 0x040C8 /* Total Octets TX Low - R/clr */
944 #define E1000_TOTH 0x040CC /* Total Octets TX High - R/clr */
945 #define E1000_TPR 0x040D0 /* Total Packets RX - R/clr */
946 #define E1000_TPT 0x040D4 /* Total Packets TX - R/clr */
947 #define E1000_PTC64 0x040D8 /* Packets TX (64 bytes) - R/clr */
948 #define E1000_PTC127 0x040DC /* Packets TX (65-127 bytes) - R/clr */
949 #define E1000_PTC255 0x040E0 /* Packets TX (128-255 bytes) - R/clr */
950 #define E1000_PTC511 0x040E4 /* Packets TX (256-511 bytes) - R/clr */
951 #define E1000_PTC1023 0x040E8 /* Packets TX (512-1023 bytes) - R/clr */
952 #define E1000_PTC1522 0x040EC /* Packets TX (1024-1522 Bytes) - R/clr */
953 #define E1000_MPTC 0x040F0 /* Multicast Packets TX Count - R/clr */
954 #define E1000_BPTC 0x040F4 /* Broadcast Packets TX Count - R/clr */
955 #define E1000_TSCTC 0x040F8 /* TCP Segmentation Context TX - R/clr */
956 #define E1000_TSCTFC 0x040FC /* TCP Segmentation Context TX Fail - R/clr */
957 #define E1000_IAC 0x04100 /* Interrupt Assertion Count */
958 #define E1000_ICRXPTC 0x04104 /* Interrupt Cause Rx Packet Timer Expire Count */
959 #define E1000_ICRXATC 0x04108 /* Interrupt Cause Rx Absolute Timer Expire Count */
960 #define E1000_ICTXPTC 0x0410C /* Interrupt Cause Tx Packet Timer Expire Count */
961 #define E1000_ICTXATC 0x04110 /* Interrupt Cause Tx Absolute Timer Expire Count */
962 #define E1000_ICTXQEC 0x04118 /* Interrupt Cause Tx Queue Empty Count */
963 #define E1000_ICTXQMTC 0x0411C /* Interrupt Cause Tx Queue Minimum Threshold Count */
964 #define E1000_ICRXDMTC 0x04120 /* Interrupt Cause Rx Descriptor Minimum Threshold Count */
965 #define E1000_ICRXOC 0x04124 /* Interrupt Cause Receiver Overrun Count */
966 #define E1000_RXCSUM 0x05000 /* RX Checksum Control - RW */
967 #define E1000_RFCTL 0x05008 /* Receive Filter Control */
968 #define E1000_MTA 0x05200 /* Multicast Table Array - RW Array */
969 #define E1000_RA 0x05400 /* Receive Address - RW Array */
970 #define E1000_VFTA 0x05600 /* VLAN Filter Table Array - RW Array */
971 #define E1000_WUC 0x05800 /* Wakeup Control - RW */
972 #define E1000_WUFC 0x05808 /* Wakeup Filter Control - RW */
973 #define E1000_WUS 0x05810 /* Wakeup Status - RO */
974 #define E1000_MANC 0x05820 /* Management Control - RW */
975 #define E1000_IPAV 0x05838 /* IP Address Valid - RW */
976 #define E1000_IP4AT 0x05840 /* IPv4 Address Table - RW Array */
977 #define E1000_IP6AT 0x05880 /* IPv6 Address Table - RW Array */
978 #define E1000_WUPL 0x05900 /* Wakeup Packet Length - RW */
979 #define E1000_WUPM 0x05A00 /* Wakeup Packet Memory - RO A */
980 #define E1000_FFLT 0x05F00 /* Flexible Filter Length Table - RW Array */
981 #define E1000_HOST_IF 0x08800 /* Host Interface */
982 #define E1000_FFMT 0x09000 /* Flexible Filter Mask Table - RW Array */
983 #define E1000_FFVT 0x09800 /* Flexible Filter Value Table - RW Array */
984
985 #define E1000_KUMCTRLSTA 0x00034 /* MAC-PHY interface - RW */
986 #define E1000_MDPHYA 0x0003C /* PHY address - RW */
987 #define E1000_MANC2H 0x05860 /* Managment Control To Host - RW */
988 #define E1000_SW_FW_SYNC 0x05B5C /* Software-Firmware Synchronization - RW */
989
990 #define E1000_GCR 0x05B00 /* PCI-Ex Control */
991 #define E1000_GSCL_1 0x05B10 /* PCI-Ex Statistic Control #1 */
992 #define E1000_GSCL_2 0x05B14 /* PCI-Ex Statistic Control #2 */
993 #define E1000_GSCL_3 0x05B18 /* PCI-Ex Statistic Control #3 */
994 #define E1000_GSCL_4 0x05B1C /* PCI-Ex Statistic Control #4 */
995 #define E1000_FACTPS 0x05B30 /* Function Active and Power State to MNG */
996 #define E1000_SWSM 0x05B50 /* SW Semaphore */
997 #define E1000_FWSM 0x05B54 /* FW Semaphore */
998 #define E1000_FFLT_DBG 0x05F04 /* Debug Register */
999 #define E1000_HICR 0x08F00 /* Host Interface Control */
1000
1001 /* RSS registers */
1002 #define E1000_CPUVEC 0x02C10 /* CPU Vector Register - RW */
1003 #define E1000_MRQC 0x05818 /* Multiple Receive Control - RW */
1004 #define E1000_RETA 0x05C00 /* Redirection Table - RW Array */
1005 #define E1000_RSSRK 0x05C80 /* RSS Random Key - RW Array */
1006 #define E1000_RSSIM 0x05864 /* RSS Interrupt Mask */
1007 #define E1000_RSSIR 0x05868 /* RSS Interrupt Request */
1008 /* Register Set (82542)
1009 *
1010 * Some of the 82542 registers are located at different offsets than they are
1011 * in more current versions of the 8254x. Despite the difference in location,
1012 * the registers function in the same manner.
1013 */
1014 #define E1000_82542_CTRL E1000_CTRL
1015 #define E1000_82542_CTRL_DUP E1000_CTRL_DUP
1016 #define E1000_82542_STATUS E1000_STATUS
1017 #define E1000_82542_EECD E1000_EECD
1018 #define E1000_82542_EERD E1000_EERD
1019 #define E1000_82542_CTRL_EXT E1000_CTRL_EXT
1020 #define E1000_82542_FLA E1000_FLA
1021 #define E1000_82542_MDIC E1000_MDIC
1022 #define E1000_82542_SCTL E1000_SCTL
1023 #define E1000_82542_FEXTNVM E1000_FEXTNVM
1024 #define E1000_82542_FCAL E1000_FCAL
1025 #define E1000_82542_FCAH E1000_FCAH
1026 #define E1000_82542_FCT E1000_FCT
1027 #define E1000_82542_VET E1000_VET
1028 #define E1000_82542_RA 0x00040
1029 #define E1000_82542_ICR E1000_ICR
1030 #define E1000_82542_ITR E1000_ITR
1031 #define E1000_82542_ICS E1000_ICS
1032 #define E1000_82542_IMS E1000_IMS
1033 #define E1000_82542_IMC E1000_IMC
1034 #define E1000_82542_RCTL E1000_RCTL
1035 #define E1000_82542_RDTR 0x00108
1036 #define E1000_82542_RDBAL 0x00110
1037 #define E1000_82542_RDBAH 0x00114
1038 #define E1000_82542_RDLEN 0x00118
1039 #define E1000_82542_RDH 0x00120
1040 #define E1000_82542_RDT 0x00128
1041 #define E1000_82542_RDTR0 E1000_82542_RDTR
1042 #define E1000_82542_RDBAL0 E1000_82542_RDBAL
1043 #define E1000_82542_RDBAH0 E1000_82542_RDBAH
1044 #define E1000_82542_RDLEN0 E1000_82542_RDLEN
1045 #define E1000_82542_RDH0 E1000_82542_RDH
1046 #define E1000_82542_RDT0 E1000_82542_RDT
1047 #define E1000_82542_SRRCTL(_n) (0x280C + ((_n) << 8)) /* Split and Replication
1048 * RX Control - RW */
1049 #define E1000_82542_DCA_RXCTRL(_n) (0x02814 + ((_n) << 8))
1050 #define E1000_82542_RDBAH3 0x02B04 /* RX Desc Base High Queue 3 - RW */
1051 #define E1000_82542_RDBAL3 0x02B00 /* RX Desc Low Queue 3 - RW */
1052 #define E1000_82542_RDLEN3 0x02B08 /* RX Desc Length Queue 3 - RW */
1053 #define E1000_82542_RDH3 0x02B10 /* RX Desc Head Queue 3 - RW */
1054 #define E1000_82542_RDT3 0x02B18 /* RX Desc Tail Queue 3 - RW */
1055 #define E1000_82542_RDBAL2 0x02A00 /* RX Desc Base Low Queue 2 - RW */
1056 #define E1000_82542_RDBAH2 0x02A04 /* RX Desc Base High Queue 2 - RW */
1057 #define E1000_82542_RDLEN2 0x02A08 /* RX Desc Length Queue 2 - RW */
1058 #define E1000_82542_RDH2 0x02A10 /* RX Desc Head Queue 2 - RW */
1059 #define E1000_82542_RDT2 0x02A18 /* RX Desc Tail Queue 2 - RW */
1060 #define E1000_82542_RDTR1 0x00130
1061 #define E1000_82542_RDBAL1 0x00138
1062 #define E1000_82542_RDBAH1 0x0013C
1063 #define E1000_82542_RDLEN1 0x00140
1064 #define E1000_82542_RDH1 0x00148
1065 #define E1000_82542_RDT1 0x00150
1066 #define E1000_82542_FCRTH 0x00160
1067 #define E1000_82542_FCRTL 0x00168
1068 #define E1000_82542_FCTTV E1000_FCTTV
1069 #define E1000_82542_TXCW E1000_TXCW
1070 #define E1000_82542_RXCW E1000_RXCW
1071 #define E1000_82542_MTA 0x00200
1072 #define E1000_82542_TCTL E1000_TCTL
1073 #define E1000_82542_TCTL_EXT E1000_TCTL_EXT
1074 #define E1000_82542_TIPG E1000_TIPG
1075 #define E1000_82542_TDBAL 0x00420
1076 #define E1000_82542_TDBAH 0x00424
1077 #define E1000_82542_TDLEN 0x00428
1078 #define E1000_82542_TDH 0x00430
1079 #define E1000_82542_TDT 0x00438
1080 #define E1000_82542_TIDV 0x00440
1081 #define E1000_82542_TBT E1000_TBT
1082 #define E1000_82542_AIT E1000_AIT
1083 #define E1000_82542_VFTA 0x00600
1084 #define E1000_82542_LEDCTL E1000_LEDCTL
1085 #define E1000_82542_PBA E1000_PBA
1086 #define E1000_82542_PBS E1000_PBS
1087 #define E1000_82542_EEMNGCTL E1000_EEMNGCTL
1088 #define E1000_82542_EEARBC E1000_EEARBC
1089 #define E1000_82542_FLASHT E1000_FLASHT
1090 #define E1000_82542_EEWR E1000_EEWR
1091 #define E1000_82542_FLSWCTL E1000_FLSWCTL
1092 #define E1000_82542_FLSWDATA E1000_FLSWDATA
1093 #define E1000_82542_FLSWCNT E1000_FLSWCNT
1094 #define E1000_82542_FLOP E1000_FLOP
1095 #define E1000_82542_EXTCNF_CTRL E1000_EXTCNF_CTRL
1096 #define E1000_82542_EXTCNF_SIZE E1000_EXTCNF_SIZE
1097 #define E1000_82542_PHY_CTRL E1000_PHY_CTRL
1098 #define E1000_82542_ERT E1000_ERT
1099 #define E1000_82542_RXDCTL E1000_RXDCTL
1100 #define E1000_82542_RXDCTL1 E1000_RXDCTL1
1101 #define E1000_82542_RADV E1000_RADV
1102 #define E1000_82542_RSRPD E1000_RSRPD
1103 #define E1000_82542_TXDMAC E1000_TXDMAC
1104 #define E1000_82542_KABGTXD E1000_KABGTXD
1105 #define E1000_82542_TDFHS E1000_TDFHS
1106 #define E1000_82542_TDFTS E1000_TDFTS
1107 #define E1000_82542_TDFPC E1000_TDFPC
1108 #define E1000_82542_TXDCTL E1000_TXDCTL
1109 #define E1000_82542_TADV E1000_TADV
1110 #define E1000_82542_TSPMT E1000_TSPMT
1111 #define E1000_82542_CRCERRS E1000_CRCERRS
1112 #define E1000_82542_ALGNERRC E1000_ALGNERRC
1113 #define E1000_82542_SYMERRS E1000_SYMERRS
1114 #define E1000_82542_RXERRC E1000_RXERRC
1115 #define E1000_82542_MPC E1000_MPC
1116 #define E1000_82542_SCC E1000_SCC
1117 #define E1000_82542_ECOL E1000_ECOL
1118 #define E1000_82542_MCC E1000_MCC
1119 #define E1000_82542_LATECOL E1000_LATECOL
1120 #define E1000_82542_COLC E1000_COLC
1121 #define E1000_82542_DC E1000_DC
1122 #define E1000_82542_TNCRS E1000_TNCRS
1123 #define E1000_82542_SEC E1000_SEC
1124 #define E1000_82542_CEXTERR E1000_CEXTERR
1125 #define E1000_82542_RLEC E1000_RLEC
1126 #define E1000_82542_XONRXC E1000_XONRXC
1127 #define E1000_82542_XONTXC E1000_XONTXC
1128 #define E1000_82542_XOFFRXC E1000_XOFFRXC
1129 #define E1000_82542_XOFFTXC E1000_XOFFTXC
1130 #define E1000_82542_FCRUC E1000_FCRUC
1131 #define E1000_82542_PRC64 E1000_PRC64
1132 #define E1000_82542_PRC127 E1000_PRC127
1133 #define E1000_82542_PRC255 E1000_PRC255
1134 #define E1000_82542_PRC511 E1000_PRC511
1135 #define E1000_82542_PRC1023 E1000_PRC1023
1136 #define E1000_82542_PRC1522 E1000_PRC1522
1137 #define E1000_82542_GPRC E1000_GPRC
1138 #define E1000_82542_BPRC E1000_BPRC
1139 #define E1000_82542_MPRC E1000_MPRC
1140 #define E1000_82542_GPTC E1000_GPTC
1141 #define E1000_82542_GORCL E1000_GORCL
1142 #define E1000_82542_GORCH E1000_GORCH
1143 #define E1000_82542_GOTCL E1000_GOTCL
1144 #define E1000_82542_GOTCH E1000_GOTCH
1145 #define E1000_82542_RNBC E1000_RNBC
1146 #define E1000_82542_RUC E1000_RUC
1147 #define E1000_82542_RFC E1000_RFC
1148 #define E1000_82542_ROC E1000_ROC
1149 #define E1000_82542_RJC E1000_RJC
1150 #define E1000_82542_MGTPRC E1000_MGTPRC
1151 #define E1000_82542_MGTPDC E1000_MGTPDC
1152 #define E1000_82542_MGTPTC E1000_MGTPTC
1153 #define E1000_82542_TORL E1000_TORL
1154 #define E1000_82542_TORH E1000_TORH
1155 #define E1000_82542_TOTL E1000_TOTL
1156 #define E1000_82542_TOTH E1000_TOTH
1157 #define E1000_82542_TPR E1000_TPR
1158 #define E1000_82542_TPT E1000_TPT
1159 #define E1000_82542_PTC64 E1000_PTC64
1160 #define E1000_82542_PTC127 E1000_PTC127
1161 #define E1000_82542_PTC255 E1000_PTC255
1162 #define E1000_82542_PTC511 E1000_PTC511
1163 #define E1000_82542_PTC1023 E1000_PTC1023
1164 #define E1000_82542_PTC1522 E1000_PTC1522
1165 #define E1000_82542_MPTC E1000_MPTC
1166 #define E1000_82542_BPTC E1000_BPTC
1167 #define E1000_82542_TSCTC E1000_TSCTC
1168 #define E1000_82542_TSCTFC E1000_TSCTFC
1169 #define E1000_82542_RXCSUM E1000_RXCSUM
1170 #define E1000_82542_WUC E1000_WUC
1171 #define E1000_82542_WUFC E1000_WUFC
1172 #define E1000_82542_WUS E1000_WUS
1173 #define E1000_82542_MANC E1000_MANC
1174 #define E1000_82542_IPAV E1000_IPAV
1175 #define E1000_82542_IP4AT E1000_IP4AT
1176 #define E1000_82542_IP6AT E1000_IP6AT
1177 #define E1000_82542_WUPL E1000_WUPL
1178 #define E1000_82542_WUPM E1000_WUPM
1179 #define E1000_82542_FFLT E1000_FFLT
1180 #define E1000_82542_TDFH 0x08010
1181 #define E1000_82542_TDFT 0x08018
1182 #define E1000_82542_FFMT E1000_FFMT
1183 #define E1000_82542_FFVT E1000_FFVT
1184 #define E1000_82542_HOST_IF E1000_HOST_IF
1185 #define E1000_82542_IAM E1000_IAM
1186 #define E1000_82542_EEMNGCTL E1000_EEMNGCTL
1187 #define E1000_82542_PSRCTL E1000_PSRCTL
1188 #define E1000_82542_RAID E1000_RAID
1189 #define E1000_82542_TARC0 E1000_TARC0
1190 #define E1000_82542_TDBAL1 E1000_TDBAL1
1191 #define E1000_82542_TDBAH1 E1000_TDBAH1
1192 #define E1000_82542_TDLEN1 E1000_TDLEN1
1193 #define E1000_82542_TDH1 E1000_TDH1
1194 #define E1000_82542_TDT1 E1000_TDT1
1195 #define E1000_82542_TXDCTL1 E1000_TXDCTL1
1196 #define E1000_82542_TARC1 E1000_TARC1
1197 #define E1000_82542_RFCTL E1000_RFCTL
1198 #define E1000_82542_GCR E1000_GCR
1199 #define E1000_82542_GSCL_1 E1000_GSCL_1
1200 #define E1000_82542_GSCL_2 E1000_GSCL_2
1201 #define E1000_82542_GSCL_3 E1000_GSCL_3
1202 #define E1000_82542_GSCL_4 E1000_GSCL_4
1203 #define E1000_82542_FACTPS E1000_FACTPS
1204 #define E1000_82542_SWSM E1000_SWSM
1205 #define E1000_82542_FWSM E1000_FWSM
1206 #define E1000_82542_FFLT_DBG E1000_FFLT_DBG
1207 #define E1000_82542_IAC E1000_IAC
1208 #define E1000_82542_ICRXPTC E1000_ICRXPTC
1209 #define E1000_82542_ICRXATC E1000_ICRXATC
1210 #define E1000_82542_ICTXPTC E1000_ICTXPTC
1211 #define E1000_82542_ICTXATC E1000_ICTXATC
1212 #define E1000_82542_ICTXQEC E1000_ICTXQEC
1213 #define E1000_82542_ICTXQMTC E1000_ICTXQMTC
1214 #define E1000_82542_ICRXDMTC E1000_ICRXDMTC
1215 #define E1000_82542_ICRXOC E1000_ICRXOC
1216 #define E1000_82542_HICR E1000_HICR
1217
1218 #define E1000_82542_CPUVEC E1000_CPUVEC
1219 #define E1000_82542_MRQC E1000_MRQC
1220 #define E1000_82542_RETA E1000_RETA
1221 #define E1000_82542_RSSRK E1000_RSSRK
1222 #define E1000_82542_RSSIM E1000_RSSIM
1223 #define E1000_82542_RSSIR E1000_RSSIR
1224 #define E1000_82542_KUMCTRLSTA E1000_KUMCTRLSTA
1225 #define E1000_82542_SW_FW_SYNC E1000_SW_FW_SYNC
1226
1227 /* Statistics counters collected by the MAC */
1228 struct e1000_hw_stats {
1229 u64 crcerrs;
1230 u64 algnerrc;
1231 u64 symerrs;
1232 u64 rxerrc;
1233 u64 txerrc;
1234 u64 mpc;
1235 u64 scc;
1236 u64 ecol;
1237 u64 mcc;
1238 u64 latecol;
1239 u64 colc;
1240 u64 dc;
1241 u64 tncrs;
1242 u64 sec;
1243 u64 cexterr;
1244 u64 rlec;
1245 u64 xonrxc;
1246 u64 xontxc;
1247 u64 xoffrxc;
1248 u64 xofftxc;
1249 u64 fcruc;
1250 u64 prc64;
1251 u64 prc127;
1252 u64 prc255;
1253 u64 prc511;
1254 u64 prc1023;
1255 u64 prc1522;
1256 u64 gprc;
1257 u64 bprc;
1258 u64 mprc;
1259 u64 gptc;
1260 u64 gorcl;
1261 u64 gorch;
1262 u64 gotcl;
1263 u64 gotch;
1264 u64 rnbc;
1265 u64 ruc;
1266 u64 rfc;
1267 u64 roc;
1268 u64 rlerrc;
1269 u64 rjc;
1270 u64 mgprc;
1271 u64 mgpdc;
1272 u64 mgptc;
1273 u64 torl;
1274 u64 torh;
1275 u64 totl;
1276 u64 toth;
1277 u64 tpr;
1278 u64 tpt;
1279 u64 ptc64;
1280 u64 ptc127;
1281 u64 ptc255;
1282 u64 ptc511;
1283 u64 ptc1023;
1284 u64 ptc1522;
1285 u64 mptc;
1286 u64 bptc;
1287 u64 tsctc;
1288 u64 tsctfc;
1289 u64 iac;
1290 u64 icrxptc;
1291 u64 icrxatc;
1292 u64 ictxptc;
1293 u64 ictxatc;
1294 u64 ictxqec;
1295 u64 ictxqmtc;
1296 u64 icrxdmtc;
1297 u64 icrxoc;
1298 };
1299
1300 /* Structure containing variables used by the shared code (e1000_hw.c) */
1301 struct e1000_hw {
1302 u8 __iomem *hw_addr;
1303 u8 __iomem *flash_address;
1304 e1000_mac_type mac_type;
1305 e1000_phy_type phy_type;
1306 u32 phy_init_script;
1307 e1000_media_type media_type;
1308 void *back;
1309 struct e1000_shadow_ram *eeprom_shadow_ram;
1310 u32 flash_bank_size;
1311 u32 flash_base_addr;
1312 e1000_fc_type fc;
1313 e1000_bus_speed bus_speed;
1314 e1000_bus_width bus_width;
1315 e1000_bus_type bus_type;
1316 struct e1000_eeprom_info eeprom;
1317 e1000_ms_type master_slave;
1318 e1000_ms_type original_master_slave;
1319 e1000_ffe_config ffe_config_state;
1320 u32 asf_firmware_present;
1321 u32 eeprom_semaphore_present;
1322 unsigned long io_base;
1323 u32 phy_id;
1324 u32 phy_revision;
1325 u32 phy_addr;
1326 u32 original_fc;
1327 u32 txcw;
1328 u32 autoneg_failed;
1329 u32 max_frame_size;
1330 u32 min_frame_size;
1331 u32 mc_filter_type;
1332 u32 num_mc_addrs;
1333 u32 collision_delta;
1334 u32 tx_packet_delta;
1335 u32 ledctl_default;
1336 u32 ledctl_mode1;
1337 u32 ledctl_mode2;
1338 bool tx_pkt_filtering;
1339 struct e1000_host_mng_dhcp_cookie mng_cookie;
1340 u16 phy_spd_default;
1341 u16 autoneg_advertised;
1342 u16 pci_cmd_word;
1343 u16 fc_high_water;
1344 u16 fc_low_water;
1345 u16 fc_pause_time;
1346 u16 current_ifs_val;
1347 u16 ifs_min_val;
1348 u16 ifs_max_val;
1349 u16 ifs_step_size;
1350 u16 ifs_ratio;
1351 u16 device_id;
1352 u16 vendor_id;
1353 u16 subsystem_id;
1354 u16 subsystem_vendor_id;
1355 u8 revision_id;
1356 u8 autoneg;
1357 u8 mdix;
1358 u8 forced_speed_duplex;
1359 u8 wait_autoneg_complete;
1360 u8 dma_fairness;
1361 u8 mac_addr[NODE_ADDRESS_SIZE];
1362 u8 perm_mac_addr[NODE_ADDRESS_SIZE];
1363 bool disable_polarity_correction;
1364 bool speed_downgraded;
1365 e1000_smart_speed smart_speed;
1366 e1000_dsp_config dsp_config_state;
1367 bool get_link_status;
1368 bool serdes_has_link;
1369 bool tbi_compatibility_en;
1370 bool tbi_compatibility_on;
1371 bool laa_is_present;
1372 bool phy_reset_disable;
1373 bool initialize_hw_bits_disable;
1374 bool fc_send_xon;
1375 bool fc_strict_ieee;
1376 bool report_tx_early;
1377 bool adaptive_ifs;
1378 bool ifs_params_forced;
1379 bool in_ifs_mode;
1380 bool mng_reg_access_disabled;
1381 bool leave_av_bit_off;
1382 bool bad_tx_carr_stats_fd;
1383 bool has_smbus;
1384 };
1385
1386 #define E1000_EEPROM_SWDPIN0 0x0001 /* SWDPIN 0 EEPROM Value */
1387 #define E1000_EEPROM_LED_LOGIC 0x0020 /* Led Logic Word */
1388 #define E1000_EEPROM_RW_REG_DATA 16 /* Offset to data in EEPROM read/write registers */
1389 #define E1000_EEPROM_RW_REG_DONE 2 /* Offset to READ/WRITE done bit */
1390 #define E1000_EEPROM_RW_REG_START 1 /* First bit for telling part to start operation */
1391 #define E1000_EEPROM_RW_ADDR_SHIFT 2 /* Shift to the address bits */
1392 #define E1000_EEPROM_POLL_WRITE 1 /* Flag for polling for write complete */
1393 #define E1000_EEPROM_POLL_READ 0 /* Flag for polling for read complete */
1394 /* Register Bit Masks */
1395 /* Device Control */
1396 #define E1000_CTRL_FD 0x00000001 /* Full duplex.0=half; 1=full */
1397 #define E1000_CTRL_BEM 0x00000002 /* Endian Mode.0=little,1=big */
1398 #define E1000_CTRL_PRIOR 0x00000004 /* Priority on PCI. 0=rx,1=fair */
1399 #define E1000_CTRL_GIO_MASTER_DISABLE 0x00000004 /*Blocks new Master requests */
1400 #define E1000_CTRL_LRST 0x00000008 /* Link reset. 0=normal,1=reset */
1401 #define E1000_CTRL_TME 0x00000010 /* Test mode. 0=normal,1=test */
1402 #define E1000_CTRL_SLE 0x00000020 /* Serial Link on 0=dis,1=en */
1403 #define E1000_CTRL_ASDE 0x00000020 /* Auto-speed detect enable */
1404 #define E1000_CTRL_SLU 0x00000040 /* Set link up (Force Link) */
1405 #define E1000_CTRL_ILOS 0x00000080 /* Invert Loss-Of Signal */
1406 #define E1000_CTRL_SPD_SEL 0x00000300 /* Speed Select Mask */
1407 #define E1000_CTRL_SPD_10 0x00000000 /* Force 10Mb */
1408 #define E1000_CTRL_SPD_100 0x00000100 /* Force 100Mb */
1409 #define E1000_CTRL_SPD_1000 0x00000200 /* Force 1Gb */
1410 #define E1000_CTRL_BEM32 0x00000400 /* Big Endian 32 mode */
1411 #define E1000_CTRL_FRCSPD 0x00000800 /* Force Speed */
1412 #define E1000_CTRL_FRCDPX 0x00001000 /* Force Duplex */
1413 #define E1000_CTRL_D_UD_EN 0x00002000 /* Dock/Undock enable */
1414 #define E1000_CTRL_D_UD_POLARITY 0x00004000 /* Defined polarity of Dock/Undock indication in SDP[0] */
1415 #define E1000_CTRL_FORCE_PHY_RESET 0x00008000 /* Reset both PHY ports, through PHYRST_N pin */
1416 #define E1000_CTRL_EXT_LINK_EN 0x00010000 /* enable link status from external LINK_0 and LINK_1 pins */
1417 #define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */
1418 #define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */
1419 #define E1000_CTRL_SWDPIN2 0x00100000 /* SWDPIN 2 value */
1420 #define E1000_CTRL_SWDPIN3 0x00200000 /* SWDPIN 3 value */
1421 #define E1000_CTRL_SWDPIO0 0x00400000 /* SWDPIN 0 Input or output */
1422 #define E1000_CTRL_SWDPIO1 0x00800000 /* SWDPIN 1 input or output */
1423 #define E1000_CTRL_SWDPIO2 0x01000000 /* SWDPIN 2 input or output */
1424 #define E1000_CTRL_SWDPIO3 0x02000000 /* SWDPIN 3 input or output */
1425 #define E1000_CTRL_RST 0x04000000 /* Global reset */
1426 #define E1000_CTRL_RFCE 0x08000000 /* Receive Flow Control enable */
1427 #define E1000_CTRL_TFCE 0x10000000 /* Transmit flow control enable */
1428 #define E1000_CTRL_RTE 0x20000000 /* Routing tag enable */
1429 #define E1000_CTRL_VME 0x40000000 /* IEEE VLAN mode enable */
1430 #define E1000_CTRL_PHY_RST 0x80000000 /* PHY Reset */
1431 #define E1000_CTRL_SW2FW_INT 0x02000000 /* Initiate an interrupt to manageability engine */
1432
1433 /* Device Status */
1434 #define E1000_STATUS_FD 0x00000001 /* Full duplex.0=half,1=full */
1435 #define E1000_STATUS_LU 0x00000002 /* Link up.0=no,1=link */
1436 #define E1000_STATUS_FUNC_MASK 0x0000000C /* PCI Function Mask */
1437 #define E1000_STATUS_FUNC_SHIFT 2
1438 #define E1000_STATUS_FUNC_0 0x00000000 /* Function 0 */
1439 #define E1000_STATUS_FUNC_1 0x00000004 /* Function 1 */
1440 #define E1000_STATUS_TXOFF 0x00000010 /* transmission paused */
1441 #define E1000_STATUS_TBIMODE 0x00000020 /* TBI mode */
1442 #define E1000_STATUS_SPEED_MASK 0x000000C0
1443 #define E1000_STATUS_SPEED_10 0x00000000 /* Speed 10Mb/s */
1444 #define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */
1445 #define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */
1446 #define E1000_STATUS_LAN_INIT_DONE 0x00000200 /* Lan Init Completion
1447 by EEPROM/Flash */
1448 #define E1000_STATUS_ASDV 0x00000300 /* Auto speed detect value */
1449 #define E1000_STATUS_DOCK_CI 0x00000800 /* Change in Dock/Undock state. Clear on write '0'. */
1450 #define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master requests. */
1451 #define E1000_STATUS_MTXCKOK 0x00000400 /* MTX clock running OK */
1452 #define E1000_STATUS_PCI66 0x00000800 /* In 66Mhz slot */
1453 #define E1000_STATUS_BUS64 0x00001000 /* In 64 bit slot */
1454 #define E1000_STATUS_PCIX_MODE 0x00002000 /* PCI-X mode */
1455 #define E1000_STATUS_PCIX_SPEED 0x0000C000 /* PCI-X bus speed */
1456 #define E1000_STATUS_BMC_SKU_0 0x00100000 /* BMC USB redirect disabled */
1457 #define E1000_STATUS_BMC_SKU_1 0x00200000 /* BMC SRAM disabled */
1458 #define E1000_STATUS_BMC_SKU_2 0x00400000 /* BMC SDRAM disabled */
1459 #define E1000_STATUS_BMC_CRYPTO 0x00800000 /* BMC crypto disabled */
1460 #define E1000_STATUS_BMC_LITE 0x01000000 /* BMC external code execution disabled */
1461 #define E1000_STATUS_RGMII_ENABLE 0x02000000 /* RGMII disabled */
1462 #define E1000_STATUS_FUSE_8 0x04000000
1463 #define E1000_STATUS_FUSE_9 0x08000000
1464 #define E1000_STATUS_SERDES0_DIS 0x10000000 /* SERDES disabled on port 0 */
1465 #define E1000_STATUS_SERDES1_DIS 0x20000000 /* SERDES disabled on port 1 */
1466
1467 /* Constants used to interpret the masked PCI-X bus speed. */
1468 #define E1000_STATUS_PCIX_SPEED_66 0x00000000 /* PCI-X bus speed 50-66 MHz */
1469 #define E1000_STATUS_PCIX_SPEED_100 0x00004000 /* PCI-X bus speed 66-100 MHz */
1470 #define E1000_STATUS_PCIX_SPEED_133 0x00008000 /* PCI-X bus speed 100-133 MHz */
1471
1472 /* EEPROM/Flash Control */
1473 #define E1000_EECD_SK 0x00000001 /* EEPROM Clock */
1474 #define E1000_EECD_CS 0x00000002 /* EEPROM Chip Select */
1475 #define E1000_EECD_DI 0x00000004 /* EEPROM Data In */
1476 #define E1000_EECD_DO 0x00000008 /* EEPROM Data Out */
1477 #define E1000_EECD_FWE_MASK 0x00000030
1478 #define E1000_EECD_FWE_DIS 0x00000010 /* Disable FLASH writes */
1479 #define E1000_EECD_FWE_EN 0x00000020 /* Enable FLASH writes */
1480 #define E1000_EECD_FWE_SHIFT 4
1481 #define E1000_EECD_REQ 0x00000040 /* EEPROM Access Request */
1482 #define E1000_EECD_GNT 0x00000080 /* EEPROM Access Grant */
1483 #define E1000_EECD_PRES 0x00000100 /* EEPROM Present */
1484 #define E1000_EECD_SIZE 0x00000200 /* EEPROM Size (0=64 word 1=256 word) */
1485 #define E1000_EECD_ADDR_BITS 0x00000400 /* EEPROM Addressing bits based on type
1486 * (0-small, 1-large) */
1487 #define E1000_EECD_TYPE 0x00002000 /* EEPROM Type (1-SPI, 0-Microwire) */
1488 #ifndef E1000_EEPROM_GRANT_ATTEMPTS
1489 #define E1000_EEPROM_GRANT_ATTEMPTS 1000 /* EEPROM # attempts to gain grant */
1490 #endif
1491 #define E1000_EECD_AUTO_RD 0x00000200 /* EEPROM Auto Read done */
1492 #define E1000_EECD_SIZE_EX_MASK 0x00007800 /* EEprom Size */
1493 #define E1000_EECD_SIZE_EX_SHIFT 11
1494 #define E1000_EECD_NVADDS 0x00018000 /* NVM Address Size */
1495 #define E1000_EECD_SELSHAD 0x00020000 /* Select Shadow RAM */
1496 #define E1000_EECD_INITSRAM 0x00040000 /* Initialize Shadow RAM */
1497 #define E1000_EECD_FLUPD 0x00080000 /* Update FLASH */
1498 #define E1000_EECD_AUPDEN 0x00100000 /* Enable Autonomous FLASH update */
1499 #define E1000_EECD_SHADV 0x00200000 /* Shadow RAM Data Valid */
1500 #define E1000_EECD_SEC1VAL 0x00400000 /* Sector One Valid */
1501 #define E1000_EECD_SECVAL_SHIFT 22
1502 #define E1000_STM_OPCODE 0xDB00
1503 #define E1000_HICR_FW_RESET 0xC0
1504
1505 #define E1000_SHADOW_RAM_WORDS 2048
1506 #define E1000_ICH_NVM_SIG_WORD 0x13
1507 #define E1000_ICH_NVM_SIG_MASK 0xC0
1508
1509 /* EEPROM Read */
1510 #define E1000_EERD_START 0x00000001 /* Start Read */
1511 #define E1000_EERD_DONE 0x00000010 /* Read Done */
1512 #define E1000_EERD_ADDR_SHIFT 8
1513 #define E1000_EERD_ADDR_MASK 0x0000FF00 /* Read Address */
1514 #define E1000_EERD_DATA_SHIFT 16
1515 #define E1000_EERD_DATA_MASK 0xFFFF0000 /* Read Data */
1516
1517 /* SPI EEPROM Status Register */
1518 #define EEPROM_STATUS_RDY_SPI 0x01
1519 #define EEPROM_STATUS_WEN_SPI 0x02
1520 #define EEPROM_STATUS_BP0_SPI 0x04
1521 #define EEPROM_STATUS_BP1_SPI 0x08
1522 #define EEPROM_STATUS_WPEN_SPI 0x80
1523
1524 /* Extended Device Control */
1525 #define E1000_CTRL_EXT_GPI0_EN 0x00000001 /* Maps SDP4 to GPI0 */
1526 #define E1000_CTRL_EXT_GPI1_EN 0x00000002 /* Maps SDP5 to GPI1 */
1527 #define E1000_CTRL_EXT_PHYINT_EN E1000_CTRL_EXT_GPI1_EN
1528 #define E1000_CTRL_EXT_GPI2_EN 0x00000004 /* Maps SDP6 to GPI2 */
1529 #define E1000_CTRL_EXT_GPI3_EN 0x00000008 /* Maps SDP7 to GPI3 */
1530 #define E1000_CTRL_EXT_SDP4_DATA 0x00000010 /* Value of SW Defineable Pin 4 */
1531 #define E1000_CTRL_EXT_SDP5_DATA 0x00000020 /* Value of SW Defineable Pin 5 */
1532 #define E1000_CTRL_EXT_PHY_INT E1000_CTRL_EXT_SDP5_DATA
1533 #define E1000_CTRL_EXT_SDP6_DATA 0x00000040 /* Value of SW Defineable Pin 6 */
1534 #define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Defineable Pin 7 */
1535 #define E1000_CTRL_EXT_SDP4_DIR 0x00000100 /* Direction of SDP4 0=in 1=out */
1536 #define E1000_CTRL_EXT_SDP5_DIR 0x00000200 /* Direction of SDP5 0=in 1=out */
1537 #define E1000_CTRL_EXT_SDP6_DIR 0x00000400 /* Direction of SDP6 0=in 1=out */
1538 #define E1000_CTRL_EXT_SDP7_DIR 0x00000800 /* Direction of SDP7 0=in 1=out */
1539 #define E1000_CTRL_EXT_ASDCHK 0x00001000 /* Initiate an ASD sequence */
1540 #define E1000_CTRL_EXT_EE_RST 0x00002000 /* Reinitialize from EEPROM */
1541 #define E1000_CTRL_EXT_IPS 0x00004000 /* Invert Power State */
1542 #define E1000_CTRL_EXT_SPD_BYPS 0x00008000 /* Speed Select Bypass */
1543 #define E1000_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */
1544 #define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000
1545 #define E1000_CTRL_EXT_LINK_MODE_GMII 0x00000000
1546 #define E1000_CTRL_EXT_LINK_MODE_TBI 0x00C00000
1547 #define E1000_CTRL_EXT_LINK_MODE_KMRN 0x00000000
1548 #define E1000_CTRL_EXT_LINK_MODE_SERDES 0x00C00000
1549 #define E1000_CTRL_EXT_LINK_MODE_SGMII 0x00800000
1550 #define E1000_CTRL_EXT_WR_WMARK_MASK 0x03000000
1551 #define E1000_CTRL_EXT_WR_WMARK_256 0x00000000
1552 #define E1000_CTRL_EXT_WR_WMARK_320 0x01000000
1553 #define E1000_CTRL_EXT_WR_WMARK_384 0x02000000
1554 #define E1000_CTRL_EXT_WR_WMARK_448 0x03000000
1555 #define E1000_CTRL_EXT_DRV_LOAD 0x10000000 /* Driver loaded bit for FW */
1556 #define E1000_CTRL_EXT_IAME 0x08000000 /* Interrupt acknowledge Auto-mask */
1557 #define E1000_CTRL_EXT_INT_TIMER_CLR 0x20000000 /* Clear Interrupt timers after IMS clear */
1558 #define E1000_CRTL_EXT_PB_PAREN 0x01000000 /* packet buffer parity error detection enabled */
1559 #define E1000_CTRL_EXT_DF_PAREN 0x02000000 /* descriptor FIFO parity error detection enable */
1560 #define E1000_CTRL_EXT_GHOST_PAREN 0x40000000
1561
1562 /* MDI Control */
1563 #define E1000_MDIC_DATA_MASK 0x0000FFFF
1564 #define E1000_MDIC_REG_MASK 0x001F0000
1565 #define E1000_MDIC_REG_SHIFT 16
1566 #define E1000_MDIC_PHY_MASK 0x03E00000
1567 #define E1000_MDIC_PHY_SHIFT 21
1568 #define E1000_MDIC_OP_WRITE 0x04000000
1569 #define E1000_MDIC_OP_READ 0x08000000
1570 #define E1000_MDIC_READY 0x10000000
1571 #define E1000_MDIC_INT_EN 0x20000000
1572 #define E1000_MDIC_ERROR 0x40000000
1573
1574 #define E1000_KUMCTRLSTA_MASK 0x0000FFFF
1575 #define E1000_KUMCTRLSTA_OFFSET 0x001F0000
1576 #define E1000_KUMCTRLSTA_OFFSET_SHIFT 16
1577 #define E1000_KUMCTRLSTA_REN 0x00200000
1578
1579 #define E1000_KUMCTRLSTA_OFFSET_FIFO_CTRL 0x00000000
1580 #define E1000_KUMCTRLSTA_OFFSET_CTRL 0x00000001
1581 #define E1000_KUMCTRLSTA_OFFSET_INB_CTRL 0x00000002
1582 #define E1000_KUMCTRLSTA_OFFSET_DIAG 0x00000003
1583 #define E1000_KUMCTRLSTA_OFFSET_TIMEOUTS 0x00000004
1584 #define E1000_KUMCTRLSTA_OFFSET_INB_PARAM 0x00000009
1585 #define E1000_KUMCTRLSTA_OFFSET_HD_CTRL 0x00000010
1586 #define E1000_KUMCTRLSTA_OFFSET_M2P_SERDES 0x0000001E
1587 #define E1000_KUMCTRLSTA_OFFSET_M2P_MODES 0x0000001F
1588
1589 /* FIFO Control */
1590 #define E1000_KUMCTRLSTA_FIFO_CTRL_RX_BYPASS 0x00000008
1591 #define E1000_KUMCTRLSTA_FIFO_CTRL_TX_BYPASS 0x00000800
1592
1593 /* In-Band Control */
1594 #define E1000_KUMCTRLSTA_INB_CTRL_LINK_STATUS_TX_TIMEOUT_DEFAULT 0x00000500
1595 #define E1000_KUMCTRLSTA_INB_CTRL_DIS_PADDING 0x00000010
1596
1597 /* Half-Duplex Control */
1598 #define E1000_KUMCTRLSTA_HD_CTRL_10_100_DEFAULT 0x00000004
1599 #define E1000_KUMCTRLSTA_HD_CTRL_1000_DEFAULT 0x00000000
1600
1601 #define E1000_KUMCTRLSTA_OFFSET_K0S_CTRL 0x0000001E
1602
1603 #define E1000_KUMCTRLSTA_DIAG_FELPBK 0x2000
1604 #define E1000_KUMCTRLSTA_DIAG_NELPBK 0x1000
1605
1606 #define E1000_KUMCTRLSTA_K0S_100_EN 0x2000
1607 #define E1000_KUMCTRLSTA_K0S_GBE_EN 0x1000
1608 #define E1000_KUMCTRLSTA_K0S_ENTRY_LATENCY_MASK 0x0003
1609
1610 #define E1000_KABGTXD_BGSQLBIAS 0x00050000
1611
1612 #define E1000_PHY_CTRL_SPD_EN 0x00000001
1613 #define E1000_PHY_CTRL_D0A_LPLU 0x00000002
1614 #define E1000_PHY_CTRL_NOND0A_LPLU 0x00000004
1615 #define E1000_PHY_CTRL_NOND0A_GBE_DISABLE 0x00000008
1616 #define E1000_PHY_CTRL_GBE_DISABLE 0x00000040
1617 #define E1000_PHY_CTRL_B2B_EN 0x00000080
1618
1619 /* LED Control */
1620 #define E1000_LEDCTL_LED0_MODE_MASK 0x0000000F
1621 #define E1000_LEDCTL_LED0_MODE_SHIFT 0
1622 #define E1000_LEDCTL_LED0_BLINK_RATE 0x0000020
1623 #define E1000_LEDCTL_LED0_IVRT 0x00000040
1624 #define E1000_LEDCTL_LED0_BLINK 0x00000080
1625 #define E1000_LEDCTL_LED1_MODE_MASK 0x00000F00
1626 #define E1000_LEDCTL_LED1_MODE_SHIFT 8
1627 #define E1000_LEDCTL_LED1_BLINK_RATE 0x0002000
1628 #define E1000_LEDCTL_LED1_IVRT 0x00004000
1629 #define E1000_LEDCTL_LED1_BLINK 0x00008000
1630 #define E1000_LEDCTL_LED2_MODE_MASK 0x000F0000
1631 #define E1000_LEDCTL_LED2_MODE_SHIFT 16
1632 #define E1000_LEDCTL_LED2_BLINK_RATE 0x00200000
1633 #define E1000_LEDCTL_LED2_IVRT 0x00400000
1634 #define E1000_LEDCTL_LED2_BLINK 0x00800000
1635 #define E1000_LEDCTL_LED3_MODE_MASK 0x0F000000
1636 #define E1000_LEDCTL_LED3_MODE_SHIFT 24
1637 #define E1000_LEDCTL_LED3_BLINK_RATE 0x20000000
1638 #define E1000_LEDCTL_LED3_IVRT 0x40000000
1639 #define E1000_LEDCTL_LED3_BLINK 0x80000000
1640
1641 #define E1000_LEDCTL_MODE_LINK_10_1000 0x0
1642 #define E1000_LEDCTL_MODE_LINK_100_1000 0x1
1643 #define E1000_LEDCTL_MODE_LINK_UP 0x2
1644 #define E1000_LEDCTL_MODE_ACTIVITY 0x3
1645 #define E1000_LEDCTL_MODE_LINK_ACTIVITY 0x4
1646 #define E1000_LEDCTL_MODE_LINK_10 0x5
1647 #define E1000_LEDCTL_MODE_LINK_100 0x6
1648 #define E1000_LEDCTL_MODE_LINK_1000 0x7
1649 #define E1000_LEDCTL_MODE_PCIX_MODE 0x8
1650 #define E1000_LEDCTL_MODE_FULL_DUPLEX 0x9
1651 #define E1000_LEDCTL_MODE_COLLISION 0xA
1652 #define E1000_LEDCTL_MODE_BUS_SPEED 0xB
1653 #define E1000_LEDCTL_MODE_BUS_SIZE 0xC
1654 #define E1000_LEDCTL_MODE_PAUSED 0xD
1655 #define E1000_LEDCTL_MODE_LED_ON 0xE
1656 #define E1000_LEDCTL_MODE_LED_OFF 0xF
1657
1658 /* Receive Address */
1659 #define E1000_RAH_AV 0x80000000 /* Receive descriptor valid */
1660
1661 /* Interrupt Cause Read */
1662 #define E1000_ICR_TXDW 0x00000001 /* Transmit desc written back */
1663 #define E1000_ICR_TXQE 0x00000002 /* Transmit Queue empty */
1664 #define E1000_ICR_LSC 0x00000004 /* Link Status Change */
1665 #define E1000_ICR_RXSEQ 0x00000008 /* rx sequence error */
1666 #define E1000_ICR_RXDMT0 0x00000010 /* rx desc min. threshold (0) */
1667 #define E1000_ICR_RXO 0x00000040 /* rx overrun */
1668 #define E1000_ICR_RXT0 0x00000080 /* rx timer intr (ring 0) */
1669 #define E1000_ICR_MDAC 0x00000200 /* MDIO access complete */
1670 #define E1000_ICR_RXCFG 0x00000400 /* RX /c/ ordered set */
1671 #define E1000_ICR_GPI_EN0 0x00000800 /* GP Int 0 */
1672 #define E1000_ICR_GPI_EN1 0x00001000 /* GP Int 1 */
1673 #define E1000_ICR_GPI_EN2 0x00002000 /* GP Int 2 */
1674 #define E1000_ICR_GPI_EN3 0x00004000 /* GP Int 3 */
1675 #define E1000_ICR_TXD_LOW 0x00008000
1676 #define E1000_ICR_SRPD 0x00010000
1677 #define E1000_ICR_ACK 0x00020000 /* Receive Ack frame */
1678 #define E1000_ICR_MNG 0x00040000 /* Manageability event */
1679 #define E1000_ICR_DOCK 0x00080000 /* Dock/Undock */
1680 #define E1000_ICR_INT_ASSERTED 0x80000000 /* If this bit asserted, the driver should claim the interrupt */
1681 #define E1000_ICR_RXD_FIFO_PAR0 0x00100000 /* queue 0 Rx descriptor FIFO parity error */
1682 #define E1000_ICR_TXD_FIFO_PAR0 0x00200000 /* queue 0 Tx descriptor FIFO parity error */
1683 #define E1000_ICR_HOST_ARB_PAR 0x00400000 /* host arb read buffer parity error */
1684 #define E1000_ICR_PB_PAR 0x00800000 /* packet buffer parity error */
1685 #define E1000_ICR_RXD_FIFO_PAR1 0x01000000 /* queue 1 Rx descriptor FIFO parity error */
1686 #define E1000_ICR_TXD_FIFO_PAR1 0x02000000 /* queue 1 Tx descriptor FIFO parity error */
1687 #define E1000_ICR_ALL_PARITY 0x03F00000 /* all parity error bits */
1688 #define E1000_ICR_DSW 0x00000020 /* FW changed the status of DISSW bit in the FWSM */
1689 #define E1000_ICR_PHYINT 0x00001000 /* LAN connected device generates an interrupt */
1690 #define E1000_ICR_EPRST 0x00100000 /* ME hardware reset occurs */
1691
1692 /* Interrupt Cause Set */
1693 #define E1000_ICS_TXDW E1000_ICR_TXDW /* Transmit desc written back */
1694 #define E1000_ICS_TXQE E1000_ICR_TXQE /* Transmit Queue empty */
1695 #define E1000_ICS_LSC E1000_ICR_LSC /* Link Status Change */
1696 #define E1000_ICS_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */
1697 #define E1000_ICS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */
1698 #define E1000_ICS_RXO E1000_ICR_RXO /* rx overrun */
1699 #define E1000_ICS_RXT0 E1000_ICR_RXT0 /* rx timer intr */
1700 #define E1000_ICS_MDAC E1000_ICR_MDAC /* MDIO access complete */
1701 #define E1000_ICS_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */
1702 #define E1000_ICS_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */
1703 #define E1000_ICS_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */
1704 #define E1000_ICS_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */
1705 #define E1000_ICS_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */
1706 #define E1000_ICS_TXD_LOW E1000_ICR_TXD_LOW
1707 #define E1000_ICS_SRPD E1000_ICR_SRPD
1708 #define E1000_ICS_ACK E1000_ICR_ACK /* Receive Ack frame */
1709 #define E1000_ICS_MNG E1000_ICR_MNG /* Manageability event */
1710 #define E1000_ICS_DOCK E1000_ICR_DOCK /* Dock/Undock */
1711 #define E1000_ICS_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */
1712 #define E1000_ICS_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */
1713 #define E1000_ICS_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer parity error */
1714 #define E1000_ICS_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */
1715 #define E1000_ICS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */
1716 #define E1000_ICS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */
1717 #define E1000_ICS_DSW E1000_ICR_DSW
1718 #define E1000_ICS_PHYINT E1000_ICR_PHYINT
1719 #define E1000_ICS_EPRST E1000_ICR_EPRST
1720
1721 /* Interrupt Mask Set */
1722 #define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */
1723 #define E1000_IMS_TXQE E1000_ICR_TXQE /* Transmit Queue empty */
1724 #define E1000_IMS_LSC E1000_ICR_LSC /* Link Status Change */
1725 #define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */
1726 #define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */
1727 #define E1000_IMS_RXO E1000_ICR_RXO /* rx overrun */
1728 #define E1000_IMS_RXT0 E1000_ICR_RXT0 /* rx timer intr */
1729 #define E1000_IMS_MDAC E1000_ICR_MDAC /* MDIO access complete */
1730 #define E1000_IMS_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */
1731 #define E1000_IMS_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */
1732 #define E1000_IMS_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */
1733 #define E1000_IMS_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */
1734 #define E1000_IMS_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */
1735 #define E1000_IMS_TXD_LOW E1000_ICR_TXD_LOW
1736 #define E1000_IMS_SRPD E1000_ICR_SRPD
1737 #define E1000_IMS_ACK E1000_ICR_ACK /* Receive Ack frame */
1738 #define E1000_IMS_MNG E1000_ICR_MNG /* Manageability event */
1739 #define E1000_IMS_DOCK E1000_ICR_DOCK /* Dock/Undock */
1740 #define E1000_IMS_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */
1741 #define E1000_IMS_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */
1742 #define E1000_IMS_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer parity error */
1743 #define E1000_IMS_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */
1744 #define E1000_IMS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */
1745 #define E1000_IMS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */
1746 #define E1000_IMS_DSW E1000_ICR_DSW
1747 #define E1000_IMS_PHYINT E1000_ICR_PHYINT
1748 #define E1000_IMS_EPRST E1000_ICR_EPRST
1749
1750 /* Interrupt Mask Clear */
1751 #define E1000_IMC_TXDW E1000_ICR_TXDW /* Transmit desc written back */
1752 #define E1000_IMC_TXQE E1000_ICR_TXQE /* Transmit Queue empty */
1753 #define E1000_IMC_LSC E1000_ICR_LSC /* Link Status Change */
1754 #define E1000_IMC_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */
1755 #define E1000_IMC_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */
1756 #define E1000_IMC_RXO E1000_ICR_RXO /* rx overrun */
1757 #define E1000_IMC_RXT0 E1000_ICR_RXT0 /* rx timer intr */
1758 #define E1000_IMC_MDAC E1000_ICR_MDAC /* MDIO access complete */
1759 #define E1000_IMC_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */
1760 #define E1000_IMC_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */
1761 #define E1000_IMC_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */
1762 #define E1000_IMC_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */
1763 #define E1000_IMC_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */
1764 #define E1000_IMC_TXD_LOW E1000_ICR_TXD_LOW
1765 #define E1000_IMC_SRPD E1000_ICR_SRPD
1766 #define E1000_IMC_ACK E1000_ICR_ACK /* Receive Ack frame */
1767 #define E1000_IMC_MNG E1000_ICR_MNG /* Manageability event */
1768 #define E1000_IMC_DOCK E1000_ICR_DOCK /* Dock/Undock */
1769 #define E1000_IMC_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */
1770 #define E1000_IMC_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */
1771 #define E1000_IMC_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer parity error */
1772 #define E1000_IMC_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */
1773 #define E1000_IMC_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */
1774 #define E1000_IMC_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */
1775 #define E1000_IMC_DSW E1000_ICR_DSW
1776 #define E1000_IMC_PHYINT E1000_ICR_PHYINT
1777 #define E1000_IMC_EPRST E1000_ICR_EPRST
1778
1779 /* Receive Control */
1780 #define E1000_RCTL_RST 0x00000001 /* Software reset */
1781 #define E1000_RCTL_EN 0x00000002 /* enable */
1782 #define E1000_RCTL_SBP 0x00000004 /* store bad packet */
1783 #define E1000_RCTL_UPE 0x00000008 /* unicast promiscuous enable */
1784 #define E1000_RCTL_MPE 0x00000010 /* multicast promiscuous enab */
1785 #define E1000_RCTL_LPE 0x00000020 /* long packet enable */
1786 #define E1000_RCTL_LBM_NO 0x00000000 /* no loopback mode */
1787 #define E1000_RCTL_LBM_MAC 0x00000040 /* MAC loopback mode */
1788 #define E1000_RCTL_LBM_SLP 0x00000080 /* serial link loopback mode */
1789 #define E1000_RCTL_LBM_TCVR 0x000000C0 /* tcvr loopback mode */
1790 #define E1000_RCTL_DTYP_MASK 0x00000C00 /* Descriptor type mask */
1791 #define E1000_RCTL_DTYP_PS 0x00000400 /* Packet Split descriptor */
1792 #define E1000_RCTL_RDMTS_HALF 0x00000000 /* rx desc min threshold size */
1793 #define E1000_RCTL_RDMTS_QUAT 0x00000100 /* rx desc min threshold size */
1794 #define E1000_RCTL_RDMTS_EIGTH 0x00000200 /* rx desc min threshold size */
1795 #define E1000_RCTL_MO_SHIFT 12 /* multicast offset shift */
1796 #define E1000_RCTL_MO_0 0x00000000 /* multicast offset 11:0 */
1797 #define E1000_RCTL_MO_1 0x00001000 /* multicast offset 12:1 */
1798 #define E1000_RCTL_MO_2 0x00002000 /* multicast offset 13:2 */
1799 #define E1000_RCTL_MO_3 0x00003000 /* multicast offset 15:4 */
1800 #define E1000_RCTL_MDR 0x00004000 /* multicast desc ring 0 */
1801 #define E1000_RCTL_BAM 0x00008000 /* broadcast enable */
1802 /* these buffer sizes are valid if E1000_RCTL_BSEX is 0 */
1803 #define E1000_RCTL_SZ_2048 0x00000000 /* rx buffer size 2048 */
1804 #define E1000_RCTL_SZ_1024 0x00010000 /* rx buffer size 1024 */
1805 #define E1000_RCTL_SZ_512 0x00020000 /* rx buffer size 512 */
1806 #define E1000_RCTL_SZ_256 0x00030000 /* rx buffer size 256 */
1807 /* these buffer sizes are valid if E1000_RCTL_BSEX is 1 */
1808 #define E1000_RCTL_SZ_16384 0x00010000 /* rx buffer size 16384 */
1809 #define E1000_RCTL_SZ_8192 0x00020000 /* rx buffer size 8192 */
1810 #define E1000_RCTL_SZ_4096 0x00030000 /* rx buffer size 4096 */
1811 #define E1000_RCTL_VFE 0x00040000 /* vlan filter enable */
1812 #define E1000_RCTL_CFIEN 0x00080000 /* canonical form enable */
1813 #define E1000_RCTL_CFI 0x00100000 /* canonical form indicator */
1814 #define E1000_RCTL_DPF 0x00400000 /* discard pause frames */
1815 #define E1000_RCTL_PMCF 0x00800000 /* pass MAC control frames */
1816 #define E1000_RCTL_BSEX 0x02000000 /* Buffer size extension */
1817 #define E1000_RCTL_SECRC 0x04000000 /* Strip Ethernet CRC */
1818 #define E1000_RCTL_FLXBUF_MASK 0x78000000 /* Flexible buffer size */
1819 #define E1000_RCTL_FLXBUF_SHIFT 27 /* Flexible buffer shift */
1820
1821 /* Use byte values for the following shift parameters
1822 * Usage:
1823 * psrctl |= (((ROUNDUP(value0, 128) >> E1000_PSRCTL_BSIZE0_SHIFT) &
1824 * E1000_PSRCTL_BSIZE0_MASK) |
1825 * ((ROUNDUP(value1, 1024) >> E1000_PSRCTL_BSIZE1_SHIFT) &
1826 * E1000_PSRCTL_BSIZE1_MASK) |
1827 * ((ROUNDUP(value2, 1024) << E1000_PSRCTL_BSIZE2_SHIFT) &
1828 * E1000_PSRCTL_BSIZE2_MASK) |
1829 * ((ROUNDUP(value3, 1024) << E1000_PSRCTL_BSIZE3_SHIFT) |;
1830 * E1000_PSRCTL_BSIZE3_MASK))
1831 * where value0 = [128..16256], default=256
1832 * value1 = [1024..64512], default=4096
1833 * value2 = [0..64512], default=4096
1834 * value3 = [0..64512], default=0
1835 */
1836
1837 #define E1000_PSRCTL_BSIZE0_MASK 0x0000007F
1838 #define E1000_PSRCTL_BSIZE1_MASK 0x00003F00
1839 #define E1000_PSRCTL_BSIZE2_MASK 0x003F0000
1840 #define E1000_PSRCTL_BSIZE3_MASK 0x3F000000
1841
1842 #define E1000_PSRCTL_BSIZE0_SHIFT 7 /* Shift _right_ 7 */
1843 #define E1000_PSRCTL_BSIZE1_SHIFT 2 /* Shift _right_ 2 */
1844 #define E1000_PSRCTL_BSIZE2_SHIFT 6 /* Shift _left_ 6 */
1845 #define E1000_PSRCTL_BSIZE3_SHIFT 14 /* Shift _left_ 14 */
1846
1847 /* SW_W_SYNC definitions */
1848 #define E1000_SWFW_EEP_SM 0x0001
1849 #define E1000_SWFW_PHY0_SM 0x0002
1850 #define E1000_SWFW_PHY1_SM 0x0004
1851 #define E1000_SWFW_MAC_CSR_SM 0x0008
1852
1853 /* Receive Descriptor */
1854 #define E1000_RDT_DELAY 0x0000ffff /* Delay timer (1=1024us) */
1855 #define E1000_RDT_FPDB 0x80000000 /* Flush descriptor block */
1856 #define E1000_RDLEN_LEN 0x0007ff80 /* descriptor length */
1857 #define E1000_RDH_RDH 0x0000ffff /* receive descriptor head */
1858 #define E1000_RDT_RDT 0x0000ffff /* receive descriptor tail */
1859
1860 /* Flow Control */
1861 #define E1000_FCRTH_RTH 0x0000FFF8 /* Mask Bits[15:3] for RTH */
1862 #define E1000_FCRTH_XFCE 0x80000000 /* External Flow Control Enable */
1863 #define E1000_FCRTL_RTL 0x0000FFF8 /* Mask Bits[15:3] for RTL */
1864 #define E1000_FCRTL_XONE 0x80000000 /* Enable XON frame transmission */
1865
1866 /* Header split receive */
1867 #define E1000_RFCTL_ISCSI_DIS 0x00000001
1868 #define E1000_RFCTL_ISCSI_DWC_MASK 0x0000003E
1869 #define E1000_RFCTL_ISCSI_DWC_SHIFT 1
1870 #define E1000_RFCTL_NFSW_DIS 0x00000040
1871 #define E1000_RFCTL_NFSR_DIS 0x00000080
1872 #define E1000_RFCTL_NFS_VER_MASK 0x00000300
1873 #define E1000_RFCTL_NFS_VER_SHIFT 8
1874 #define E1000_RFCTL_IPV6_DIS 0x00000400
1875 #define E1000_RFCTL_IPV6_XSUM_DIS 0x00000800
1876 #define E1000_RFCTL_ACK_DIS 0x00001000
1877 #define E1000_RFCTL_ACKD_DIS 0x00002000
1878 #define E1000_RFCTL_IPFRSP_DIS 0x00004000
1879 #define E1000_RFCTL_EXTEN 0x00008000
1880 #define E1000_RFCTL_IPV6_EX_DIS 0x00010000
1881 #define E1000_RFCTL_NEW_IPV6_EXT_DIS 0x00020000
1882
1883 /* Receive Descriptor Control */
1884 #define E1000_RXDCTL_PTHRESH 0x0000003F /* RXDCTL Prefetch Threshold */
1885 #define E1000_RXDCTL_HTHRESH 0x00003F00 /* RXDCTL Host Threshold */
1886 #define E1000_RXDCTL_WTHRESH 0x003F0000 /* RXDCTL Writeback Threshold */
1887 #define E1000_RXDCTL_GRAN 0x01000000 /* RXDCTL Granularity */
1888
1889 /* Transmit Descriptor Control */
1890 #define E1000_TXDCTL_PTHRESH 0x0000003F /* TXDCTL Prefetch Threshold */
1891 #define E1000_TXDCTL_HTHRESH 0x00003F00 /* TXDCTL Host Threshold */
1892 #define E1000_TXDCTL_WTHRESH 0x003F0000 /* TXDCTL Writeback Threshold */
1893 #define E1000_TXDCTL_GRAN 0x01000000 /* TXDCTL Granularity */
1894 #define E1000_TXDCTL_LWTHRESH 0xFE000000 /* TXDCTL Low Threshold */
1895 #define E1000_TXDCTL_FULL_TX_DESC_WB 0x01010000 /* GRAN=1, WTHRESH=1 */
1896 #define E1000_TXDCTL_COUNT_DESC 0x00400000 /* Enable the counting of desc.
1897 still to be processed. */
1898 /* Transmit Configuration Word */
1899 #define E1000_TXCW_FD 0x00000020 /* TXCW full duplex */
1900 #define E1000_TXCW_HD 0x00000040 /* TXCW half duplex */
1901 #define E1000_TXCW_PAUSE 0x00000080 /* TXCW sym pause request */
1902 #define E1000_TXCW_ASM_DIR 0x00000100 /* TXCW astm pause direction */
1903 #define E1000_TXCW_PAUSE_MASK 0x00000180 /* TXCW pause request mask */
1904 #define E1000_TXCW_RF 0x00003000 /* TXCW remote fault */
1905 #define E1000_TXCW_NP 0x00008000 /* TXCW next page */
1906 #define E1000_TXCW_CW 0x0000ffff /* TxConfigWord mask */
1907 #define E1000_TXCW_TXC 0x40000000 /* Transmit Config control */
1908 #define E1000_TXCW_ANE 0x80000000 /* Auto-neg enable */
1909
1910 /* Receive Configuration Word */
1911 #define E1000_RXCW_CW 0x0000ffff /* RxConfigWord mask */
1912 #define E1000_RXCW_NC 0x04000000 /* Receive config no carrier */
1913 #define E1000_RXCW_IV 0x08000000 /* Receive config invalid */
1914 #define E1000_RXCW_CC 0x10000000 /* Receive config change */
1915 #define E1000_RXCW_C 0x20000000 /* Receive config */
1916 #define E1000_RXCW_SYNCH 0x40000000 /* Receive config synch */
1917 #define E1000_RXCW_ANC 0x80000000 /* Auto-neg complete */
1918
1919 /* Transmit Control */
1920 #define E1000_TCTL_RST 0x00000001 /* software reset */
1921 #define E1000_TCTL_EN 0x00000002 /* enable tx */
1922 #define E1000_TCTL_BCE 0x00000004 /* busy check enable */
1923 #define E1000_TCTL_PSP 0x00000008 /* pad short packets */
1924 #define E1000_TCTL_CT 0x00000ff0 /* collision threshold */
1925 #define E1000_TCTL_COLD 0x003ff000 /* collision distance */
1926 #define E1000_TCTL_SWXOFF 0x00400000 /* SW Xoff transmission */
1927 #define E1000_TCTL_PBE 0x00800000 /* Packet Burst Enable */
1928 #define E1000_TCTL_RTLC 0x01000000 /* Re-transmit on late collision */
1929 #define E1000_TCTL_NRTU 0x02000000 /* No Re-transmit on underrun */
1930 #define E1000_TCTL_MULR 0x10000000 /* Multiple request support */
1931 /* Extended Transmit Control */
1932 #define E1000_TCTL_EXT_BST_MASK 0x000003FF /* Backoff Slot Time */
1933 #define E1000_TCTL_EXT_GCEX_MASK 0x000FFC00 /* Gigabit Carry Extend Padding */
1934
1935 /* Receive Checksum Control */
1936 #define E1000_RXCSUM_PCSS_MASK 0x000000FF /* Packet Checksum Start */
1937 #define E1000_RXCSUM_IPOFL 0x00000100 /* IPv4 checksum offload */
1938 #define E1000_RXCSUM_TUOFL 0x00000200 /* TCP / UDP checksum offload */
1939 #define E1000_RXCSUM_IPV6OFL 0x00000400 /* IPv6 checksum offload */
1940 #define E1000_RXCSUM_IPPCSE 0x00001000 /* IP payload checksum enable */
1941 #define E1000_RXCSUM_PCSD 0x00002000 /* packet checksum disabled */
1942
1943 /* Multiple Receive Queue Control */
1944 #define E1000_MRQC_ENABLE_MASK 0x00000003
1945 #define E1000_MRQC_ENABLE_RSS_2Q 0x00000001
1946 #define E1000_MRQC_ENABLE_RSS_INT 0x00000004
1947 #define E1000_MRQC_RSS_FIELD_MASK 0xFFFF0000
1948 #define E1000_MRQC_RSS_FIELD_IPV4_TCP 0x00010000
1949 #define E1000_MRQC_RSS_FIELD_IPV4 0x00020000
1950 #define E1000_MRQC_RSS_FIELD_IPV6_TCP_EX 0x00040000
1951 #define E1000_MRQC_RSS_FIELD_IPV6_EX 0x00080000
1952 #define E1000_MRQC_RSS_FIELD_IPV6 0x00100000
1953 #define E1000_MRQC_RSS_FIELD_IPV6_TCP 0x00200000
1954
1955 /* Definitions for power management and wakeup registers */
1956 /* Wake Up Control */
1957 #define E1000_WUC_APME 0x00000001 /* APM Enable */
1958 #define E1000_WUC_PME_EN 0x00000002 /* PME Enable */
1959 #define E1000_WUC_PME_STATUS 0x00000004 /* PME Status */
1960 #define E1000_WUC_APMPME 0x00000008 /* Assert PME on APM Wakeup */
1961 #define E1000_WUC_SPM 0x80000000 /* Enable SPM */
1962
1963 /* Wake Up Filter Control */
1964 #define E1000_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */
1965 #define E1000_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */
1966 #define E1000_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */
1967 #define E1000_WUFC_MC 0x00000008 /* Directed Multicast Wakeup Enable */
1968 #define E1000_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */
1969 #define E1000_WUFC_ARP 0x00000020 /* ARP Request Packet Wakeup Enable */
1970 #define E1000_WUFC_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Enable */
1971 #define E1000_WUFC_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Enable */
1972 #define E1000_WUFC_IGNORE_TCO 0x00008000 /* Ignore WakeOn TCO packets */
1973 #define E1000_WUFC_FLX0 0x00010000 /* Flexible Filter 0 Enable */
1974 #define E1000_WUFC_FLX1 0x00020000 /* Flexible Filter 1 Enable */
1975 #define E1000_WUFC_FLX2 0x00040000 /* Flexible Filter 2 Enable */
1976 #define E1000_WUFC_FLX3 0x00080000 /* Flexible Filter 3 Enable */
1977 #define E1000_WUFC_ALL_FILTERS 0x000F00FF /* Mask for all wakeup filters */
1978 #define E1000_WUFC_FLX_OFFSET 16 /* Offset to the Flexible Filters bits */
1979 #define E1000_WUFC_FLX_FILTERS 0x000F0000 /* Mask for the 4 flexible filters */
1980
1981 /* Wake Up Status */
1982 #define E1000_WUS_LNKC 0x00000001 /* Link Status Changed */
1983 #define E1000_WUS_MAG 0x00000002 /* Magic Packet Received */
1984 #define E1000_WUS_EX 0x00000004 /* Directed Exact Received */
1985 #define E1000_WUS_MC 0x00000008 /* Directed Multicast Received */
1986 #define E1000_WUS_BC 0x00000010 /* Broadcast Received */
1987 #define E1000_WUS_ARP 0x00000020 /* ARP Request Packet Received */
1988 #define E1000_WUS_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Received */
1989 #define E1000_WUS_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Received */
1990 #define E1000_WUS_FLX0 0x00010000 /* Flexible Filter 0 Match */
1991 #define E1000_WUS_FLX1 0x00020000 /* Flexible Filter 1 Match */
1992 #define E1000_WUS_FLX2 0x00040000 /* Flexible Filter 2 Match */
1993 #define E1000_WUS_FLX3 0x00080000 /* Flexible Filter 3 Match */
1994 #define E1000_WUS_FLX_FILTERS 0x000F0000 /* Mask for the 4 flexible filters */
1995
1996 /* Management Control */
1997 #define E1000_MANC_SMBUS_EN 0x00000001 /* SMBus Enabled - RO */
1998 #define E1000_MANC_ASF_EN 0x00000002 /* ASF Enabled - RO */
1999 #define E1000_MANC_R_ON_FORCE 0x00000004 /* Reset on Force TCO - RO */
2000 #define E1000_MANC_RMCP_EN 0x00000100 /* Enable RCMP 026Fh Filtering */
2001 #define E1000_MANC_0298_EN 0x00000200 /* Enable RCMP 0298h Filtering */
2002 #define E1000_MANC_IPV4_EN 0x00000400 /* Enable IPv4 */
2003 #define E1000_MANC_IPV6_EN 0x00000800 /* Enable IPv6 */
2004 #define E1000_MANC_SNAP_EN 0x00001000 /* Accept LLC/SNAP */
2005 #define E1000_MANC_ARP_EN 0x00002000 /* Enable ARP Request Filtering */
2006 #define E1000_MANC_NEIGHBOR_EN 0x00004000 /* Enable Neighbor Discovery
2007 * Filtering */
2008 #define E1000_MANC_ARP_RES_EN 0x00008000 /* Enable ARP response Filtering */
2009 #define E1000_MANC_TCO_RESET 0x00010000 /* TCO Reset Occurred */
2010 #define E1000_MANC_RCV_TCO_EN 0x00020000 /* Receive TCO Packets Enabled */
2011 #define E1000_MANC_REPORT_STATUS 0x00040000 /* Status Reporting Enabled */
2012 #define E1000_MANC_RCV_ALL 0x00080000 /* Receive All Enabled */
2013 #define E1000_MANC_BLK_PHY_RST_ON_IDE 0x00040000 /* Block phy resets */
2014 #define E1000_MANC_EN_MAC_ADDR_FILTER 0x00100000 /* Enable MAC address
2015 * filtering */
2016 #define E1000_MANC_EN_MNG2HOST 0x00200000 /* Enable MNG packets to host
2017 * memory */
2018 #define E1000_MANC_EN_IP_ADDR_FILTER 0x00400000 /* Enable IP address
2019 * filtering */
2020 #define E1000_MANC_EN_XSUM_FILTER 0x00800000 /* Enable checksum filtering */
2021 #define E1000_MANC_BR_EN 0x01000000 /* Enable broadcast filtering */
2022 #define E1000_MANC_SMB_REQ 0x01000000 /* SMBus Request */
2023 #define E1000_MANC_SMB_GNT 0x02000000 /* SMBus Grant */
2024 #define E1000_MANC_SMB_CLK_IN 0x04000000 /* SMBus Clock In */
2025 #define E1000_MANC_SMB_DATA_IN 0x08000000 /* SMBus Data In */
2026 #define E1000_MANC_SMB_DATA_OUT 0x10000000 /* SMBus Data Out */
2027 #define E1000_MANC_SMB_CLK_OUT 0x20000000 /* SMBus Clock Out */
2028
2029 #define E1000_MANC_SMB_DATA_OUT_SHIFT 28 /* SMBus Data Out Shift */
2030 #define E1000_MANC_SMB_CLK_OUT_SHIFT 29 /* SMBus Clock Out Shift */
2031
2032 /* SW Semaphore Register */
2033 #define E1000_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */
2034 #define E1000_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */
2035 #define E1000_SWSM_WMNG 0x00000004 /* Wake MNG Clock */
2036 #define E1000_SWSM_DRV_LOAD 0x00000008 /* Driver Loaded Bit */
2037
2038 /* FW Semaphore Register */
2039 #define E1000_FWSM_MODE_MASK 0x0000000E /* FW mode */
2040 #define E1000_FWSM_MODE_SHIFT 1
2041 #define E1000_FWSM_FW_VALID 0x00008000 /* FW established a valid mode */
2042
2043 #define E1000_FWSM_RSPCIPHY 0x00000040 /* Reset PHY on PCI reset */
2044 #define E1000_FWSM_DISSW 0x10000000 /* FW disable SW Write Access */
2045 #define E1000_FWSM_SKUSEL_MASK 0x60000000 /* LAN SKU select */
2046 #define E1000_FWSM_SKUEL_SHIFT 29
2047 #define E1000_FWSM_SKUSEL_EMB 0x0 /* Embedded SKU */
2048 #define E1000_FWSM_SKUSEL_CONS 0x1 /* Consumer SKU */
2049 #define E1000_FWSM_SKUSEL_PERF_100 0x2 /* Perf & Corp 10/100 SKU */
2050 #define E1000_FWSM_SKUSEL_PERF_GBE 0x3 /* Perf & Copr GbE SKU */
2051
2052 /* FFLT Debug Register */
2053 #define E1000_FFLT_DBG_INVC 0x00100000 /* Invalid /C/ code handling */
2054
2055 typedef enum {
2056 e1000_mng_mode_none = 0,
2057 e1000_mng_mode_asf,
2058 e1000_mng_mode_pt,
2059 e1000_mng_mode_ipmi,
2060 e1000_mng_mode_host_interface_only
2061 } e1000_mng_mode;
2062
2063 /* Host Interface Control Register */
2064 #define E1000_HICR_EN 0x00000001 /* Enable Bit - RO */
2065 #define E1000_HICR_C 0x00000002 /* Driver sets this bit when done
2066 * to put command in RAM */
2067 #define E1000_HICR_SV 0x00000004 /* Status Validity */
2068 #define E1000_HICR_FWR 0x00000080 /* FW reset. Set by the Host */
2069
2070 /* Host Interface Command Interface - Address range 0x8800-0x8EFF */
2071 #define E1000_HI_MAX_DATA_LENGTH 252 /* Host Interface data length */
2072 #define E1000_HI_MAX_BLOCK_BYTE_LENGTH 1792 /* Number of bytes in range */
2073 #define E1000_HI_MAX_BLOCK_DWORD_LENGTH 448 /* Number of dwords in range */
2074 #define E1000_HI_COMMAND_TIMEOUT 500 /* Time in ms to process HI command */
2075
2076 struct e1000_host_command_header {
2077 u8 command_id;
2078 u8 command_length;
2079 u8 command_options; /* I/F bits for command, status for return */
2080 u8 checksum;
2081 };
2082 struct e1000_host_command_info {
2083 struct e1000_host_command_header command_header; /* Command Head/Command Result Head has 4 bytes */
2084 u8 command_data[E1000_HI_MAX_DATA_LENGTH]; /* Command data can length 0..252 */
2085 };
2086
2087 /* Host SMB register #0 */
2088 #define E1000_HSMC0R_CLKIN 0x00000001 /* SMB Clock in */
2089 #define E1000_HSMC0R_DATAIN 0x00000002 /* SMB Data in */
2090 #define E1000_HSMC0R_DATAOUT 0x00000004 /* SMB Data out */
2091 #define E1000_HSMC0R_CLKOUT 0x00000008 /* SMB Clock out */
2092
2093 /* Host SMB register #1 */
2094 #define E1000_HSMC1R_CLKIN E1000_HSMC0R_CLKIN
2095 #define E1000_HSMC1R_DATAIN E1000_HSMC0R_DATAIN
2096 #define E1000_HSMC1R_DATAOUT E1000_HSMC0R_DATAOUT
2097 #define E1000_HSMC1R_CLKOUT E1000_HSMC0R_CLKOUT
2098
2099 /* FW Status Register */
2100 #define E1000_FWSTS_FWS_MASK 0x000000FF /* FW Status */
2101
2102 /* Wake Up Packet Length */
2103 #define E1000_WUPL_LENGTH_MASK 0x0FFF /* Only the lower 12 bits are valid */
2104
2105 #define E1000_MDALIGN 4096
2106
2107 /* PCI-Ex registers*/
2108
2109 /* PCI-Ex Control Register */
2110 #define E1000_GCR_RXD_NO_SNOOP 0x00000001
2111 #define E1000_GCR_RXDSCW_NO_SNOOP 0x00000002
2112 #define E1000_GCR_RXDSCR_NO_SNOOP 0x00000004
2113 #define E1000_GCR_TXD_NO_SNOOP 0x00000008
2114 #define E1000_GCR_TXDSCW_NO_SNOOP 0x00000010
2115 #define E1000_GCR_TXDSCR_NO_SNOOP 0x00000020
2116
2117 #define PCI_EX_NO_SNOOP_ALL (E1000_GCR_RXD_NO_SNOOP | \
2118 E1000_GCR_RXDSCW_NO_SNOOP | \
2119 E1000_GCR_RXDSCR_NO_SNOOP | \
2120 E1000_GCR_TXD_NO_SNOOP | \
2121 E1000_GCR_TXDSCW_NO_SNOOP | \
2122 E1000_GCR_TXDSCR_NO_SNOOP)
2123
2124 #define PCI_EX_82566_SNOOP_ALL PCI_EX_NO_SNOOP_ALL
2125
2126 #define E1000_GCR_L1_ACT_WITHOUT_L0S_RX 0x08000000
2127 /* Function Active and Power State to MNG */
2128 #define E1000_FACTPS_FUNC0_POWER_STATE_MASK 0x00000003
2129 #define E1000_FACTPS_LAN0_VALID 0x00000004
2130 #define E1000_FACTPS_FUNC0_AUX_EN 0x00000008
2131 #define E1000_FACTPS_FUNC1_POWER_STATE_MASK 0x000000C0
2132 #define E1000_FACTPS_FUNC1_POWER_STATE_SHIFT 6
2133 #define E1000_FACTPS_LAN1_VALID 0x00000100
2134 #define E1000_FACTPS_FUNC1_AUX_EN 0x00000200
2135 #define E1000_FACTPS_FUNC2_POWER_STATE_MASK 0x00003000
2136 #define E1000_FACTPS_FUNC2_POWER_STATE_SHIFT 12
2137 #define E1000_FACTPS_IDE_ENABLE 0x00004000
2138 #define E1000_FACTPS_FUNC2_AUX_EN 0x00008000
2139 #define E1000_FACTPS_FUNC3_POWER_STATE_MASK 0x000C0000
2140 #define E1000_FACTPS_FUNC3_POWER_STATE_SHIFT 18
2141 #define E1000_FACTPS_SP_ENABLE 0x00100000
2142 #define E1000_FACTPS_FUNC3_AUX_EN 0x00200000
2143 #define E1000_FACTPS_FUNC4_POWER_STATE_MASK 0x03000000
2144 #define E1000_FACTPS_FUNC4_POWER_STATE_SHIFT 24
2145 #define E1000_FACTPS_IPMI_ENABLE 0x04000000
2146 #define E1000_FACTPS_FUNC4_AUX_EN 0x08000000
2147 #define E1000_FACTPS_MNGCG 0x20000000
2148 #define E1000_FACTPS_LAN_FUNC_SEL 0x40000000
2149 #define E1000_FACTPS_PM_STATE_CHANGED 0x80000000
2150
2151 /* PCI-Ex Config Space */
2152 #define PCI_EX_LINK_STATUS 0x12
2153 #define PCI_EX_LINK_WIDTH_MASK 0x3F0
2154 #define PCI_EX_LINK_WIDTH_SHIFT 4
2155
2156 /* EEPROM Commands - Microwire */
2157 #define EEPROM_READ_OPCODE_MICROWIRE 0x6 /* EEPROM read opcode */
2158 #define EEPROM_WRITE_OPCODE_MICROWIRE 0x5 /* EEPROM write opcode */
2159 #define EEPROM_ERASE_OPCODE_MICROWIRE 0x7 /* EEPROM erase opcode */
2160 #define EEPROM_EWEN_OPCODE_MICROWIRE 0x13 /* EEPROM erase/write enable */
2161 #define EEPROM_EWDS_OPCODE_MICROWIRE 0x10 /* EEPROM erase/write disable */
2162
2163 /* EEPROM Commands - SPI */
2164 #define EEPROM_MAX_RETRY_SPI 5000 /* Max wait of 5ms, for RDY signal */
2165 #define EEPROM_READ_OPCODE_SPI 0x03 /* EEPROM read opcode */
2166 #define EEPROM_WRITE_OPCODE_SPI 0x02 /* EEPROM write opcode */
2167 #define EEPROM_A8_OPCODE_SPI 0x08 /* opcode bit-3 = address bit-8 */
2168 #define EEPROM_WREN_OPCODE_SPI 0x06 /* EEPROM set Write Enable latch */
2169 #define EEPROM_WRDI_OPCODE_SPI 0x04 /* EEPROM reset Write Enable latch */
2170 #define EEPROM_RDSR_OPCODE_SPI 0x05 /* EEPROM read Status register */
2171 #define EEPROM_WRSR_OPCODE_SPI 0x01 /* EEPROM write Status register */
2172 #define EEPROM_ERASE4K_OPCODE_SPI 0x20 /* EEPROM ERASE 4KB */
2173 #define EEPROM_ERASE64K_OPCODE_SPI 0xD8 /* EEPROM ERASE 64KB */
2174 #define EEPROM_ERASE256_OPCODE_SPI 0xDB /* EEPROM ERASE 256B */
2175
2176 /* EEPROM Size definitions */
2177 #define EEPROM_WORD_SIZE_SHIFT 6
2178 #define EEPROM_SIZE_SHIFT 10
2179 #define EEPROM_SIZE_MASK 0x1C00
2180
2181 /* EEPROM Word Offsets */
2182 #define EEPROM_COMPAT 0x0003
2183 #define EEPROM_ID_LED_SETTINGS 0x0004
2184 #define EEPROM_VERSION 0x0005
2185 #define EEPROM_SERDES_AMPLITUDE 0x0006 /* For SERDES output amplitude adjustment. */
2186 #define EEPROM_PHY_CLASS_WORD 0x0007
2187 #define EEPROM_INIT_CONTROL1_REG 0x000A
2188 #define EEPROM_INIT_CONTROL2_REG 0x000F
2189 #define EEPROM_SWDEF_PINS_CTRL_PORT_1 0x0010
2190 #define EEPROM_INIT_CONTROL3_PORT_B 0x0014
2191 #define EEPROM_INIT_3GIO_3 0x001A
2192 #define EEPROM_SWDEF_PINS_CTRL_PORT_0 0x0020
2193 #define EEPROM_INIT_CONTROL3_PORT_A 0x0024
2194 #define EEPROM_CFG 0x0012
2195 #define EEPROM_FLASH_VERSION 0x0032
2196 #define EEPROM_CHECKSUM_REG 0x003F
2197
2198 #define E1000_EEPROM_CFG_DONE 0x00040000 /* MNG config cycle done */
2199 #define E1000_EEPROM_CFG_DONE_PORT_1 0x00080000 /* ...for second port */
2200
2201 /* Word definitions for ID LED Settings */
2202 #define ID_LED_RESERVED_0000 0x0000
2203 #define ID_LED_RESERVED_FFFF 0xFFFF
2204 #define ID_LED_DEFAULT ((ID_LED_OFF1_ON2 << 12) | \
2205 (ID_LED_OFF1_OFF2 << 8) | \
2206 (ID_LED_DEF1_DEF2 << 4) | \
2207 (ID_LED_DEF1_DEF2))
2208 #define ID_LED_DEF1_DEF2 0x1
2209 #define ID_LED_DEF1_ON2 0x2
2210 #define ID_LED_DEF1_OFF2 0x3
2211 #define ID_LED_ON1_DEF2 0x4
2212 #define ID_LED_ON1_ON2 0x5
2213 #define ID_LED_ON1_OFF2 0x6
2214 #define ID_LED_OFF1_DEF2 0x7
2215 #define ID_LED_OFF1_ON2 0x8
2216 #define ID_LED_OFF1_OFF2 0x9
2217
2218 #define IGP_ACTIVITY_LED_MASK 0xFFFFF0FF
2219 #define IGP_ACTIVITY_LED_ENABLE 0x0300
2220 #define IGP_LED3_MODE 0x07000000
2221
2222 /* Mask bits for SERDES amplitude adjustment in Word 6 of the EEPROM */
2223 #define EEPROM_SERDES_AMPLITUDE_MASK 0x000F
2224
2225 /* Mask bit for PHY class in Word 7 of the EEPROM */
2226 #define EEPROM_PHY_CLASS_A 0x8000
2227
2228 /* Mask bits for fields in Word 0x0a of the EEPROM */
2229 #define EEPROM_WORD0A_ILOS 0x0010
2230 #define EEPROM_WORD0A_SWDPIO 0x01E0
2231 #define EEPROM_WORD0A_LRST 0x0200
2232 #define EEPROM_WORD0A_FD 0x0400
2233 #define EEPROM_WORD0A_66MHZ 0x0800
2234
2235 /* Mask bits for fields in Word 0x0f of the EEPROM */
2236 #define EEPROM_WORD0F_PAUSE_MASK 0x3000
2237 #define EEPROM_WORD0F_PAUSE 0x1000
2238 #define EEPROM_WORD0F_ASM_DIR 0x2000
2239 #define EEPROM_WORD0F_ANE 0x0800
2240 #define EEPROM_WORD0F_SWPDIO_EXT 0x00F0
2241 #define EEPROM_WORD0F_LPLU 0x0001
2242
2243 /* Mask bits for fields in Word 0x10/0x20 of the EEPROM */
2244 #define EEPROM_WORD1020_GIGA_DISABLE 0x0010
2245 #define EEPROM_WORD1020_GIGA_DISABLE_NON_D0A 0x0008
2246
2247 /* Mask bits for fields in Word 0x1a of the EEPROM */
2248 #define EEPROM_WORD1A_ASPM_MASK 0x000C
2249
2250 /* For checksumming, the sum of all words in the EEPROM should equal 0xBABA. */
2251 #define EEPROM_SUM 0xBABA
2252
2253 /* EEPROM Map defines (WORD OFFSETS)*/
2254 #define EEPROM_NODE_ADDRESS_BYTE_0 0
2255 #define EEPROM_PBA_BYTE_1 8
2256
2257 #define EEPROM_RESERVED_WORD 0xFFFF
2258
2259 /* EEPROM Map Sizes (Byte Counts) */
2260 #define PBA_SIZE 4
2261
2262 /* Collision related configuration parameters */
2263 #define E1000_COLLISION_THRESHOLD 15
2264 #define E1000_CT_SHIFT 4
2265 /* Collision distance is a 0-based value that applies to
2266 * half-duplex-capable hardware only. */
2267 #define E1000_COLLISION_DISTANCE 63
2268 #define E1000_COLLISION_DISTANCE_82542 64
2269 #define E1000_FDX_COLLISION_DISTANCE E1000_COLLISION_DISTANCE
2270 #define E1000_HDX_COLLISION_DISTANCE E1000_COLLISION_DISTANCE
2271 #define E1000_COLD_SHIFT 12
2272
2273 /* Number of Transmit and Receive Descriptors must be a multiple of 8 */
2274 #define REQ_TX_DESCRIPTOR_MULTIPLE 8
2275 #define REQ_RX_DESCRIPTOR_MULTIPLE 8
2276
2277 /* Default values for the transmit IPG register */
2278 #define DEFAULT_82542_TIPG_IPGT 10
2279 #define DEFAULT_82543_TIPG_IPGT_FIBER 9
2280 #define DEFAULT_82543_TIPG_IPGT_COPPER 8
2281
2282 #define E1000_TIPG_IPGT_MASK 0x000003FF
2283 #define E1000_TIPG_IPGR1_MASK 0x000FFC00
2284 #define E1000_TIPG_IPGR2_MASK 0x3FF00000
2285
2286 #define DEFAULT_82542_TIPG_IPGR1 2
2287 #define DEFAULT_82543_TIPG_IPGR1 8
2288 #define E1000_TIPG_IPGR1_SHIFT 10
2289
2290 #define DEFAULT_82542_TIPG_IPGR2 10
2291 #define DEFAULT_82543_TIPG_IPGR2 6
2292 #define E1000_TIPG_IPGR2_SHIFT 20
2293
2294 #define E1000_TXDMAC_DPP 0x00000001
2295
2296 /* Adaptive IFS defines */
2297 #define TX_THRESHOLD_START 8
2298 #define TX_THRESHOLD_INCREMENT 10
2299 #define TX_THRESHOLD_DECREMENT 1
2300 #define TX_THRESHOLD_STOP 190
2301 #define TX_THRESHOLD_DISABLE 0
2302 #define TX_THRESHOLD_TIMER_MS 10000
2303 #define MIN_NUM_XMITS 1000
2304 #define IFS_MAX 80
2305 #define IFS_STEP 10
2306 #define IFS_MIN 40
2307 #define IFS_RATIO 4
2308
2309 /* Extended Configuration Control and Size */
2310 #define E1000_EXTCNF_CTRL_PCIE_WRITE_ENABLE 0x00000001
2311 #define E1000_EXTCNF_CTRL_PHY_WRITE_ENABLE 0x00000002
2312 #define E1000_EXTCNF_CTRL_D_UD_ENABLE 0x00000004
2313 #define E1000_EXTCNF_CTRL_D_UD_LATENCY 0x00000008
2314 #define E1000_EXTCNF_CTRL_D_UD_OWNER 0x00000010
2315 #define E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP 0x00000020
2316 #define E1000_EXTCNF_CTRL_MDIO_HW_OWNERSHIP 0x00000040
2317 #define E1000_EXTCNF_CTRL_EXT_CNF_POINTER 0x0FFF0000
2318
2319 #define E1000_EXTCNF_SIZE_EXT_PHY_LENGTH 0x000000FF
2320 #define E1000_EXTCNF_SIZE_EXT_DOCK_LENGTH 0x0000FF00
2321 #define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH 0x00FF0000
2322 #define E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE 0x00000001
2323 #define E1000_EXTCNF_CTRL_SWFLAG 0x00000020
2324
2325 /* PBA constants */
2326 #define E1000_PBA_8K 0x0008 /* 8KB, default Rx allocation */
2327 #define E1000_PBA_12K 0x000C /* 12KB, default Rx allocation */
2328 #define E1000_PBA_16K 0x0010 /* 16KB, default TX allocation */
2329 #define E1000_PBA_20K 0x0014
2330 #define E1000_PBA_22K 0x0016
2331 #define E1000_PBA_24K 0x0018
2332 #define E1000_PBA_30K 0x001E
2333 #define E1000_PBA_32K 0x0020
2334 #define E1000_PBA_34K 0x0022
2335 #define E1000_PBA_38K 0x0026
2336 #define E1000_PBA_40K 0x0028
2337 #define E1000_PBA_48K 0x0030 /* 48KB, default RX allocation */
2338
2339 #define E1000_PBS_16K E1000_PBA_16K
2340
2341 /* Flow Control Constants */
2342 #define FLOW_CONTROL_ADDRESS_LOW 0x00C28001
2343 #define FLOW_CONTROL_ADDRESS_HIGH 0x00000100
2344 #define FLOW_CONTROL_TYPE 0x8808
2345
2346 /* The historical defaults for the flow control values are given below. */
2347 #define FC_DEFAULT_HI_THRESH (0x8000) /* 32KB */
2348 #define FC_DEFAULT_LO_THRESH (0x4000) /* 16KB */
2349 #define FC_DEFAULT_TX_TIMER (0x100) /* ~130 us */
2350
2351 /* PCIX Config space */
2352 #define PCIX_COMMAND_REGISTER 0xE6
2353 #define PCIX_STATUS_REGISTER_LO 0xE8
2354 #define PCIX_STATUS_REGISTER_HI 0xEA
2355
2356 #define PCIX_COMMAND_MMRBC_MASK 0x000C
2357 #define PCIX_COMMAND_MMRBC_SHIFT 0x2
2358 #define PCIX_STATUS_HI_MMRBC_MASK 0x0060
2359 #define PCIX_STATUS_HI_MMRBC_SHIFT 0x5
2360 #define PCIX_STATUS_HI_MMRBC_4K 0x3
2361 #define PCIX_STATUS_HI_MMRBC_2K 0x2
2362
2363 /* Number of bits required to shift right the "pause" bits from the
2364 * EEPROM (bits 13:12) to the "pause" (bits 8:7) field in the TXCW register.
2365 */
2366 #define PAUSE_SHIFT 5
2367
2368 /* Number of bits required to shift left the "SWDPIO" bits from the
2369 * EEPROM (bits 8:5) to the "SWDPIO" (bits 25:22) field in the CTRL register.
2370 */
2371 #define SWDPIO_SHIFT 17
2372
2373 /* Number of bits required to shift left the "SWDPIO_EXT" bits from the
2374 * EEPROM word F (bits 7:4) to the bits 11:8 of The Extended CTRL register.
2375 */
2376 #define SWDPIO__EXT_SHIFT 4
2377
2378 /* Number of bits required to shift left the "ILOS" bit from the EEPROM
2379 * (bit 4) to the "ILOS" (bit 7) field in the CTRL register.
2380 */
2381 #define ILOS_SHIFT 3
2382
2383 #define RECEIVE_BUFFER_ALIGN_SIZE (256)
2384
2385 /* Number of milliseconds we wait for auto-negotiation to complete */
2386 #define LINK_UP_TIMEOUT 500
2387
2388 /* Number of milliseconds we wait for Eeprom auto read bit done after MAC reset */
2389 #define AUTO_READ_DONE_TIMEOUT 10
2390 /* Number of milliseconds we wait for PHY configuration done after MAC reset */
2391 #define PHY_CFG_TIMEOUT 100
2392
2393 #define E1000_TX_BUFFER_SIZE ((u32)1514)
2394
2395 /* The carrier extension symbol, as received by the NIC. */
2396 #define CARRIER_EXTENSION 0x0F
2397
2398 /* TBI_ACCEPT macro definition:
2399 *
2400 * This macro requires:
2401 * adapter = a pointer to struct e1000_hw
2402 * status = the 8 bit status field of the RX descriptor with EOP set
2403 * error = the 8 bit error field of the RX descriptor with EOP set
2404 * length = the sum of all the length fields of the RX descriptors that
2405 * make up the current frame
2406 * last_byte = the last byte of the frame DMAed by the hardware
2407 * max_frame_length = the maximum frame length we want to accept.
2408 * min_frame_length = the minimum frame length we want to accept.
2409 *
2410 * This macro is a conditional that should be used in the interrupt
2411 * handler's Rx processing routine when RxErrors have been detected.
2412 *
2413 * Typical use:
2414 * ...
2415 * if (TBI_ACCEPT) {
2416 * accept_frame = true;
2417 * e1000_tbi_adjust_stats(adapter, MacAddress);
2418 * frame_length--;
2419 * } else {
2420 * accept_frame = false;
2421 * }
2422 * ...
2423 */
2424
2425 #define TBI_ACCEPT(adapter, status, errors, length, last_byte) \
2426 ((adapter)->tbi_compatibility_on && \
2427 (((errors) & E1000_RXD_ERR_FRAME_ERR_MASK) == E1000_RXD_ERR_CE) && \
2428 ((last_byte) == CARRIER_EXTENSION) && \
2429 (((status) & E1000_RXD_STAT_VP) ? \
2430 (((length) > ((adapter)->min_frame_size - VLAN_TAG_SIZE)) && \
2431 ((length) <= ((adapter)->max_frame_size + 1))) : \
2432 (((length) > (adapter)->min_frame_size) && \
2433 ((length) <= ((adapter)->max_frame_size + VLAN_TAG_SIZE + 1)))))
2434
2435 /* Structures, enums, and macros for the PHY */
2436
2437 /* Bit definitions for the Management Data IO (MDIO) and Management Data
2438 * Clock (MDC) pins in the Device Control Register.
2439 */
2440 #define E1000_CTRL_PHY_RESET_DIR E1000_CTRL_SWDPIO0
2441 #define E1000_CTRL_PHY_RESET E1000_CTRL_SWDPIN0
2442 #define E1000_CTRL_MDIO_DIR E1000_CTRL_SWDPIO2
2443 #define E1000_CTRL_MDIO E1000_CTRL_SWDPIN2
2444 #define E1000_CTRL_MDC_DIR E1000_CTRL_SWDPIO3
2445 #define E1000_CTRL_MDC E1000_CTRL_SWDPIN3
2446 #define E1000_CTRL_PHY_RESET_DIR4 E1000_CTRL_EXT_SDP4_DIR
2447 #define E1000_CTRL_PHY_RESET4 E1000_CTRL_EXT_SDP4_DATA
2448
2449 /* PHY 1000 MII Register/Bit Definitions */
2450 /* PHY Registers defined by IEEE */
2451 #define PHY_CTRL 0x00 /* Control Register */
2452 #define PHY_STATUS 0x01 /* Status Register */
2453 #define PHY_ID1 0x02 /* Phy Id Reg (word 1) */
2454 #define PHY_ID2 0x03 /* Phy Id Reg (word 2) */
2455 #define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */
2456 #define PHY_LP_ABILITY 0x05 /* Link Partner Ability (Base Page) */
2457 #define PHY_AUTONEG_EXP 0x06 /* Autoneg Expansion Reg */
2458 #define PHY_NEXT_PAGE_TX 0x07 /* Next Page TX */
2459 #define PHY_LP_NEXT_PAGE 0x08 /* Link Partner Next Page */
2460 #define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Reg */
2461 #define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */
2462 #define PHY_EXT_STATUS 0x0F /* Extended Status Reg */
2463
2464 #define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */
2465 #define MAX_PHY_MULTI_PAGE_REG 0xF /* Registers equal on all pages */
2466
2467 /* M88E1000 Specific Registers */
2468 #define M88E1000_PHY_SPEC_CTRL 0x10 /* PHY Specific Control Register */
2469 #define M88E1000_PHY_SPEC_STATUS 0x11 /* PHY Specific Status Register */
2470 #define M88E1000_INT_ENABLE 0x12 /* Interrupt Enable Register */
2471 #define M88E1000_INT_STATUS 0x13 /* Interrupt Status Register */
2472 #define M88E1000_EXT_PHY_SPEC_CTRL 0x14 /* Extended PHY Specific Control */
2473 #define M88E1000_RX_ERR_CNTR 0x15 /* Receive Error Counter */
2474
2475 #define M88E1000_PHY_EXT_CTRL 0x1A /* PHY extend control register */
2476 #define M88E1000_PHY_PAGE_SELECT 0x1D /* Reg 29 for page number setting */
2477 #define M88E1000_PHY_GEN_CONTROL 0x1E /* Its meaning depends on reg 29 */
2478 #define M88E1000_PHY_VCO_REG_BIT8 0x100 /* Bits 8 & 11 are adjusted for */
2479 #define M88E1000_PHY_VCO_REG_BIT11 0x800 /* improved BER performance */
2480
2481 #define IGP01E1000_IEEE_REGS_PAGE 0x0000
2482 #define IGP01E1000_IEEE_RESTART_AUTONEG 0x3300
2483 #define IGP01E1000_IEEE_FORCE_GIGA 0x0140
2484
2485 /* IGP01E1000 Specific Registers */
2486 #define IGP01E1000_PHY_PORT_CONFIG 0x10 /* PHY Specific Port Config Register */
2487 #define IGP01E1000_PHY_PORT_STATUS 0x11 /* PHY Specific Status Register */
2488 #define IGP01E1000_PHY_PORT_CTRL 0x12 /* PHY Specific Control Register */
2489 #define IGP01E1000_PHY_LINK_HEALTH 0x13 /* PHY Link Health Register */
2490 #define IGP01E1000_GMII_FIFO 0x14 /* GMII FIFO Register */
2491 #define IGP01E1000_PHY_CHANNEL_QUALITY 0x15 /* PHY Channel Quality Register */
2492 #define IGP02E1000_PHY_POWER_MGMT 0x19
2493 #define IGP01E1000_PHY_PAGE_SELECT 0x1F /* PHY Page Select Core Register */
2494
2495 /* IGP01E1000 AGC Registers - stores the cable length values*/
2496 #define IGP01E1000_PHY_AGC_A 0x1172
2497 #define IGP01E1000_PHY_AGC_B 0x1272
2498 #define IGP01E1000_PHY_AGC_C 0x1472
2499 #define IGP01E1000_PHY_AGC_D 0x1872
2500
2501 /* IGP02E1000 AGC Registers for cable length values */
2502 #define IGP02E1000_PHY_AGC_A 0x11B1
2503 #define IGP02E1000_PHY_AGC_B 0x12B1
2504 #define IGP02E1000_PHY_AGC_C 0x14B1
2505 #define IGP02E1000_PHY_AGC_D 0x18B1
2506
2507 /* IGP01E1000 DSP Reset Register */
2508 #define IGP01E1000_PHY_DSP_RESET 0x1F33
2509 #define IGP01E1000_PHY_DSP_SET 0x1F71
2510 #define IGP01E1000_PHY_DSP_FFE 0x1F35
2511
2512 #define IGP01E1000_PHY_CHANNEL_NUM 4
2513 #define IGP02E1000_PHY_CHANNEL_NUM 4
2514
2515 #define IGP01E1000_PHY_AGC_PARAM_A 0x1171
2516 #define IGP01E1000_PHY_AGC_PARAM_B 0x1271
2517 #define IGP01E1000_PHY_AGC_PARAM_C 0x1471
2518 #define IGP01E1000_PHY_AGC_PARAM_D 0x1871
2519
2520 #define IGP01E1000_PHY_EDAC_MU_INDEX 0xC000
2521 #define IGP01E1000_PHY_EDAC_SIGN_EXT_9_BITS 0x8000
2522
2523 #define IGP01E1000_PHY_ANALOG_TX_STATE 0x2890
2524 #define IGP01E1000_PHY_ANALOG_CLASS_A 0x2000
2525 #define IGP01E1000_PHY_FORCE_ANALOG_ENABLE 0x0004
2526 #define IGP01E1000_PHY_DSP_FFE_CM_CP 0x0069
2527
2528 #define IGP01E1000_PHY_DSP_FFE_DEFAULT 0x002A
2529 /* IGP01E1000 PCS Initialization register - stores the polarity status when
2530 * speed = 1000 Mbps. */
2531 #define IGP01E1000_PHY_PCS_INIT_REG 0x00B4
2532 #define IGP01E1000_PHY_PCS_CTRL_REG 0x00B5
2533
2534 #define IGP01E1000_ANALOG_REGS_PAGE 0x20C0
2535
2536 /* PHY Control Register */
2537 #define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */
2538 #define MII_CR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */
2539 #define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */
2540 #define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */
2541 #define MII_CR_ISOLATE 0x0400 /* Isolate PHY from MII */
2542 #define MII_CR_POWER_DOWN 0x0800 /* Power down */
2543 #define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */
2544 #define MII_CR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, 00=10 */
2545 #define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */
2546 #define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */
2547
2548 /* PHY Status Register */
2549 #define MII_SR_EXTENDED_CAPS 0x0001 /* Extended register capabilities */
2550 #define MII_SR_JABBER_DETECT 0x0002 /* Jabber Detected */
2551 #define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */
2552 #define MII_SR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */
2553 #define MII_SR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */
2554 #define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */
2555 #define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */
2556 #define MII_SR_EXTENDED_STATUS 0x0100 /* Ext. status info in Reg 0x0F */
2557 #define MII_SR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */
2558 #define MII_SR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */
2559 #define MII_SR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */
2560 #define MII_SR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */
2561 #define MII_SR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */
2562 #define MII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */
2563 #define MII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */
2564
2565 /* Autoneg Advertisement Register */
2566 #define NWAY_AR_SELECTOR_FIELD 0x0001 /* indicates IEEE 802.3 CSMA/CD */
2567 #define NWAY_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */
2568 #define NWAY_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */
2569 #define NWAY_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */
2570 #define NWAY_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */
2571 #define NWAY_AR_100T4_CAPS 0x0200 /* 100T4 Capable */
2572 #define NWAY_AR_PAUSE 0x0400 /* Pause operation desired */
2573 #define NWAY_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */
2574 #define NWAY_AR_REMOTE_FAULT 0x2000 /* Remote Fault detected */
2575 #define NWAY_AR_NEXT_PAGE 0x8000 /* Next Page ability supported */
2576
2577 /* Link Partner Ability Register (Base Page) */
2578 #define NWAY_LPAR_SELECTOR_FIELD 0x0000 /* LP protocol selector field */
2579 #define NWAY_LPAR_10T_HD_CAPS 0x0020 /* LP is 10T Half Duplex Capable */
2580 #define NWAY_LPAR_10T_FD_CAPS 0x0040 /* LP is 10T Full Duplex Capable */
2581 #define NWAY_LPAR_100TX_HD_CAPS 0x0080 /* LP is 100TX Half Duplex Capable */
2582 #define NWAY_LPAR_100TX_FD_CAPS 0x0100 /* LP is 100TX Full Duplex Capable */
2583 #define NWAY_LPAR_100T4_CAPS 0x0200 /* LP is 100T4 Capable */
2584 #define NWAY_LPAR_PAUSE 0x0400 /* LP Pause operation desired */
2585 #define NWAY_LPAR_ASM_DIR 0x0800 /* LP Asymmetric Pause Direction bit */
2586 #define NWAY_LPAR_REMOTE_FAULT 0x2000 /* LP has detected Remote Fault */
2587 #define NWAY_LPAR_ACKNOWLEDGE 0x4000 /* LP has rx'd link code word */
2588 #define NWAY_LPAR_NEXT_PAGE 0x8000 /* Next Page ability supported */
2589
2590 /* Autoneg Expansion Register */
2591 #define NWAY_ER_LP_NWAY_CAPS 0x0001 /* LP has Auto Neg Capability */
2592 #define NWAY_ER_PAGE_RXD 0x0002 /* LP is 10T Half Duplex Capable */
2593 #define NWAY_ER_NEXT_PAGE_CAPS 0x0004 /* LP is 10T Full Duplex Capable */
2594 #define NWAY_ER_LP_NEXT_PAGE_CAPS 0x0008 /* LP is 100TX Half Duplex Capable */
2595 #define NWAY_ER_PAR_DETECT_FAULT 0x0010 /* LP is 100TX Full Duplex Capable */
2596
2597 /* Next Page TX Register */
2598 #define NPTX_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */
2599 #define NPTX_TOGGLE 0x0800 /* Toggles between exchanges
2600 * of different NP
2601 */
2602 #define NPTX_ACKNOWLDGE2 0x1000 /* 1 = will comply with msg
2603 * 0 = cannot comply with msg
2604 */
2605 #define NPTX_MSG_PAGE 0x2000 /* formatted(1)/unformatted(0) pg */
2606 #define NPTX_NEXT_PAGE 0x8000 /* 1 = addition NP will follow
2607 * 0 = sending last NP
2608 */
2609
2610 /* Link Partner Next Page Register */
2611 #define LP_RNPR_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */
2612 #define LP_RNPR_TOGGLE 0x0800 /* Toggles between exchanges
2613 * of different NP
2614 */
2615 #define LP_RNPR_ACKNOWLDGE2 0x1000 /* 1 = will comply with msg
2616 * 0 = cannot comply with msg
2617 */
2618 #define LP_RNPR_MSG_PAGE 0x2000 /* formatted(1)/unformatted(0) pg */
2619 #define LP_RNPR_ACKNOWLDGE 0x4000 /* 1 = ACK / 0 = NO ACK */
2620 #define LP_RNPR_NEXT_PAGE 0x8000 /* 1 = addition NP will follow
2621 * 0 = sending last NP
2622 */
2623
2624 /* 1000BASE-T Control Register */
2625 #define CR_1000T_ASYM_PAUSE 0x0080 /* Advertise asymmetric pause bit */
2626 #define CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */
2627 #define CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */
2628 #define CR_1000T_REPEATER_DTE 0x0400 /* 1=Repeater/switch device port */
2629 /* 0=DTE device */
2630 #define CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master */
2631 /* 0=Configure PHY as Slave */
2632 #define CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value */
2633 /* 0=Automatic Master/Slave config */
2634 #define CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */
2635 #define CR_1000T_TEST_MODE_1 0x2000 /* Transmit Waveform test */
2636 #define CR_1000T_TEST_MODE_2 0x4000 /* Master Transmit Jitter test */
2637 #define CR_1000T_TEST_MODE_3 0x6000 /* Slave Transmit Jitter test */
2638 #define CR_1000T_TEST_MODE_4 0x8000 /* Transmitter Distortion test */
2639
2640 /* 1000BASE-T Status Register */
2641 #define SR_1000T_IDLE_ERROR_CNT 0x00FF /* Num idle errors since last read */
2642 #define SR_1000T_ASYM_PAUSE_DIR 0x0100 /* LP asymmetric pause direction bit */
2643 #define SR_1000T_LP_HD_CAPS 0x0400 /* LP is 1000T HD capable */
2644 #define SR_1000T_LP_FD_CAPS 0x0800 /* LP is 1000T FD capable */
2645 #define SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */
2646 #define SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */
2647 #define SR_1000T_MS_CONFIG_RES 0x4000 /* 1=Local TX is Master, 0=Slave */
2648 #define SR_1000T_MS_CONFIG_FAULT 0x8000 /* Master/Slave config fault */
2649 #define SR_1000T_REMOTE_RX_STATUS_SHIFT 12
2650 #define SR_1000T_LOCAL_RX_STATUS_SHIFT 13
2651 #define SR_1000T_PHY_EXCESSIVE_IDLE_ERR_COUNT 5
2652 #define FFE_IDLE_ERR_COUNT_TIMEOUT_20 20
2653 #define FFE_IDLE_ERR_COUNT_TIMEOUT_100 100
2654
2655 /* Extended Status Register */
2656 #define IEEE_ESR_1000T_HD_CAPS 0x1000 /* 1000T HD capable */
2657 #define IEEE_ESR_1000T_FD_CAPS 0x2000 /* 1000T FD capable */
2658 #define IEEE_ESR_1000X_HD_CAPS 0x4000 /* 1000X HD capable */
2659 #define IEEE_ESR_1000X_FD_CAPS 0x8000 /* 1000X FD capable */
2660
2661 #define PHY_TX_POLARITY_MASK 0x0100 /* register 10h bit 8 (polarity bit) */
2662 #define PHY_TX_NORMAL_POLARITY 0 /* register 10h bit 8 (normal polarity) */
2663
2664 #define AUTO_POLARITY_DISABLE 0x0010 /* register 11h bit 4 */
2665 /* (0=enable, 1=disable) */
2666
2667 /* M88E1000 PHY Specific Control Register */
2668 #define M88E1000_PSCR_JABBER_DISABLE 0x0001 /* 1=Jabber Function disabled */
2669 #define M88E1000_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reversal enabled */
2670 #define M88E1000_PSCR_SQE_TEST 0x0004 /* 1=SQE Test enabled */
2671 #define M88E1000_PSCR_CLK125_DISABLE 0x0010 /* 1=CLK125 low,
2672 * 0=CLK125 toggling
2673 */
2674 #define M88E1000_PSCR_MDI_MANUAL_MODE 0x0000 /* MDI Crossover Mode bits 6:5 */
2675 /* Manual MDI configuration */
2676 #define M88E1000_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */
2677 #define M88E1000_PSCR_AUTO_X_1000T 0x0040 /* 1000BASE-T: Auto crossover,
2678 * 100BASE-TX/10BASE-T:
2679 * MDI Mode
2680 */
2681 #define M88E1000_PSCR_AUTO_X_MODE 0x0060 /* Auto crossover enabled
2682 * all speeds.
2683 */
2684 #define M88E1000_PSCR_10BT_EXT_DIST_ENABLE 0x0080
2685 /* 1=Enable Extended 10BASE-T distance
2686 * (Lower 10BASE-T RX Threshold)
2687 * 0=Normal 10BASE-T RX Threshold */
2688 #define M88E1000_PSCR_MII_5BIT_ENABLE 0x0100
2689 /* 1=5-Bit interface in 100BASE-TX
2690 * 0=MII interface in 100BASE-TX */
2691 #define M88E1000_PSCR_SCRAMBLER_DISABLE 0x0200 /* 1=Scrambler disable */
2692 #define M88E1000_PSCR_FORCE_LINK_GOOD 0x0400 /* 1=Force link good */
2693 #define M88E1000_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */
2694
2695 #define M88E1000_PSCR_POLARITY_REVERSAL_SHIFT 1
2696 #define M88E1000_PSCR_AUTO_X_MODE_SHIFT 5
2697 #define M88E1000_PSCR_10BT_EXT_DIST_ENABLE_SHIFT 7
2698
2699 /* M88E1000 PHY Specific Status Register */
2700 #define M88E1000_PSSR_JABBER 0x0001 /* 1=Jabber */
2701 #define M88E1000_PSSR_REV_POLARITY 0x0002 /* 1=Polarity reversed */
2702 #define M88E1000_PSSR_DOWNSHIFT 0x0020 /* 1=Downshifted */
2703 #define M88E1000_PSSR_MDIX 0x0040 /* 1=MDIX; 0=MDI */
2704 #define M88E1000_PSSR_CABLE_LENGTH 0x0380 /* 0=<50M;1=50-80M;2=80-110M;
2705 * 3=110-140M;4=>140M */
2706 #define M88E1000_PSSR_LINK 0x0400 /* 1=Link up, 0=Link down */
2707 #define M88E1000_PSSR_SPD_DPLX_RESOLVED 0x0800 /* 1=Speed & Duplex resolved */
2708 #define M88E1000_PSSR_PAGE_RCVD 0x1000 /* 1=Page received */
2709 #define M88E1000_PSSR_DPLX 0x2000 /* 1=Duplex 0=Half Duplex */
2710 #define M88E1000_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */
2711 #define M88E1000_PSSR_10MBS 0x0000 /* 00=10Mbs */
2712 #define M88E1000_PSSR_100MBS 0x4000 /* 01=100Mbs */
2713 #define M88E1000_PSSR_1000MBS 0x8000 /* 10=1000Mbs */
2714
2715 #define M88E1000_PSSR_REV_POLARITY_SHIFT 1
2716 #define M88E1000_PSSR_DOWNSHIFT_SHIFT 5
2717 #define M88E1000_PSSR_MDIX_SHIFT 6
2718 #define M88E1000_PSSR_CABLE_LENGTH_SHIFT 7
2719
2720 /* M88E1000 Extended PHY Specific Control Register */
2721 #define M88E1000_EPSCR_FIBER_LOOPBACK 0x4000 /* 1=Fiber loopback */
2722 #define M88E1000_EPSCR_DOWN_NO_IDLE 0x8000 /* 1=Lost lock detect enabled.
2723 * Will assert lost lock and bring
2724 * link down if idle not seen
2725 * within 1ms in 1000BASE-T
2726 */
2727 /* Number of times we will attempt to autonegotiate before downshifting if we
2728 * are the master */
2729 #define M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK 0x0C00
2730 #define M88E1000_EPSCR_MASTER_DOWNSHIFT_1X 0x0000
2731 #define M88E1000_EPSCR_MASTER_DOWNSHIFT_2X 0x0400
2732 #define M88E1000_EPSCR_MASTER_DOWNSHIFT_3X 0x0800
2733 #define M88E1000_EPSCR_MASTER_DOWNSHIFT_4X 0x0C00
2734 /* Number of times we will attempt to autonegotiate before downshifting if we
2735 * are the slave */
2736 #define M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK 0x0300
2737 #define M88E1000_EPSCR_SLAVE_DOWNSHIFT_DIS 0x0000
2738 #define M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X 0x0100
2739 #define M88E1000_EPSCR_SLAVE_DOWNSHIFT_2X 0x0200
2740 #define M88E1000_EPSCR_SLAVE_DOWNSHIFT_3X 0x0300
2741 #define M88E1000_EPSCR_TX_CLK_2_5 0x0060 /* 2.5 MHz TX_CLK */
2742 #define M88E1000_EPSCR_TX_CLK_25 0x0070 /* 25 MHz TX_CLK */
2743 #define M88E1000_EPSCR_TX_CLK_0 0x0000 /* NO TX_CLK */
2744
2745 /* M88EC018 Rev 2 specific DownShift settings */
2746 #define M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK 0x0E00
2747 #define M88EC018_EPSCR_DOWNSHIFT_COUNTER_1X 0x0000
2748 #define M88EC018_EPSCR_DOWNSHIFT_COUNTER_2X 0x0200
2749 #define M88EC018_EPSCR_DOWNSHIFT_COUNTER_3X 0x0400
2750 #define M88EC018_EPSCR_DOWNSHIFT_COUNTER_4X 0x0600
2751 #define M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X 0x0800
2752 #define M88EC018_EPSCR_DOWNSHIFT_COUNTER_6X 0x0A00
2753 #define M88EC018_EPSCR_DOWNSHIFT_COUNTER_7X 0x0C00
2754 #define M88EC018_EPSCR_DOWNSHIFT_COUNTER_8X 0x0E00
2755
2756 /* IGP01E1000 Specific Port Config Register - R/W */
2757 #define IGP01E1000_PSCFR_AUTO_MDIX_PAR_DETECT 0x0010
2758 #define IGP01E1000_PSCFR_PRE_EN 0x0020
2759 #define IGP01E1000_PSCFR_SMART_SPEED 0x0080
2760 #define IGP01E1000_PSCFR_DISABLE_TPLOOPBACK 0x0100
2761 #define IGP01E1000_PSCFR_DISABLE_JABBER 0x0400
2762 #define IGP01E1000_PSCFR_DISABLE_TRANSMIT 0x2000
2763
2764 /* IGP01E1000 Specific Port Status Register - R/O */
2765 #define IGP01E1000_PSSR_AUTONEG_FAILED 0x0001 /* RO LH SC */
2766 #define IGP01E1000_PSSR_POLARITY_REVERSED 0x0002
2767 #define IGP01E1000_PSSR_CABLE_LENGTH 0x007C
2768 #define IGP01E1000_PSSR_FULL_DUPLEX 0x0200
2769 #define IGP01E1000_PSSR_LINK_UP 0x0400
2770 #define IGP01E1000_PSSR_MDIX 0x0800
2771 #define IGP01E1000_PSSR_SPEED_MASK 0xC000 /* speed bits mask */
2772 #define IGP01E1000_PSSR_SPEED_10MBPS 0x4000
2773 #define IGP01E1000_PSSR_SPEED_100MBPS 0x8000
2774 #define IGP01E1000_PSSR_SPEED_1000MBPS 0xC000
2775 #define IGP01E1000_PSSR_CABLE_LENGTH_SHIFT 0x0002 /* shift right 2 */
2776 #define IGP01E1000_PSSR_MDIX_SHIFT 0x000B /* shift right 11 */
2777
2778 /* IGP01E1000 Specific Port Control Register - R/W */
2779 #define IGP01E1000_PSCR_TP_LOOPBACK 0x0010
2780 #define IGP01E1000_PSCR_CORRECT_NC_SCMBLR 0x0200
2781 #define IGP01E1000_PSCR_TEN_CRS_SELECT 0x0400
2782 #define IGP01E1000_PSCR_FLIP_CHIP 0x0800
2783 #define IGP01E1000_PSCR_AUTO_MDIX 0x1000
2784 #define IGP01E1000_PSCR_FORCE_MDI_MDIX 0x2000 /* 0-MDI, 1-MDIX */
2785
2786 /* IGP01E1000 Specific Port Link Health Register */
2787 #define IGP01E1000_PLHR_SS_DOWNGRADE 0x8000
2788 #define IGP01E1000_PLHR_GIG_SCRAMBLER_ERROR 0x4000
2789 #define IGP01E1000_PLHR_MASTER_FAULT 0x2000
2790 #define IGP01E1000_PLHR_MASTER_RESOLUTION 0x1000
2791 #define IGP01E1000_PLHR_GIG_REM_RCVR_NOK 0x0800 /* LH */
2792 #define IGP01E1000_PLHR_IDLE_ERROR_CNT_OFLOW 0x0400 /* LH */
2793 #define IGP01E1000_PLHR_DATA_ERR_1 0x0200 /* LH */
2794 #define IGP01E1000_PLHR_DATA_ERR_0 0x0100
2795 #define IGP01E1000_PLHR_AUTONEG_FAULT 0x0040
2796 #define IGP01E1000_PLHR_AUTONEG_ACTIVE 0x0010
2797 #define IGP01E1000_PLHR_VALID_CHANNEL_D 0x0008
2798 #define IGP01E1000_PLHR_VALID_CHANNEL_C 0x0004
2799 #define IGP01E1000_PLHR_VALID_CHANNEL_B 0x0002
2800 #define IGP01E1000_PLHR_VALID_CHANNEL_A 0x0001
2801
2802 /* IGP01E1000 Channel Quality Register */
2803 #define IGP01E1000_MSE_CHANNEL_D 0x000F
2804 #define IGP01E1000_MSE_CHANNEL_C 0x00F0
2805 #define IGP01E1000_MSE_CHANNEL_B 0x0F00
2806 #define IGP01E1000_MSE_CHANNEL_A 0xF000
2807
2808 #define IGP02E1000_PM_SPD 0x0001 /* Smart Power Down */
2809 #define IGP02E1000_PM_D3_LPLU 0x0004 /* Enable LPLU in non-D0a modes */
2810 #define IGP02E1000_PM_D0_LPLU 0x0002 /* Enable LPLU in D0a mode */
2811
2812 /* IGP01E1000 DSP reset macros */
2813 #define DSP_RESET_ENABLE 0x0
2814 #define DSP_RESET_DISABLE 0x2
2815 #define E1000_MAX_DSP_RESETS 10
2816
2817 /* IGP01E1000 & IGP02E1000 AGC Registers */
2818
2819 #define IGP01E1000_AGC_LENGTH_SHIFT 7 /* Coarse - 13:11, Fine - 10:7 */
2820 #define IGP02E1000_AGC_LENGTH_SHIFT 9 /* Coarse - 15:13, Fine - 12:9 */
2821
2822 /* IGP02E1000 AGC Register Length 9-bit mask */
2823 #define IGP02E1000_AGC_LENGTH_MASK 0x7F
2824
2825 /* 7 bits (3 Coarse + 4 Fine) --> 128 optional values */
2826 #define IGP01E1000_AGC_LENGTH_TABLE_SIZE 128
2827 #define IGP02E1000_AGC_LENGTH_TABLE_SIZE 113
2828
2829 /* The precision error of the cable length is +/- 10 meters */
2830 #define IGP01E1000_AGC_RANGE 10
2831 #define IGP02E1000_AGC_RANGE 15
2832
2833 /* IGP01E1000 PCS Initialization register */
2834 /* bits 3:6 in the PCS registers stores the channels polarity */
2835 #define IGP01E1000_PHY_POLARITY_MASK 0x0078
2836
2837 /* IGP01E1000 GMII FIFO Register */
2838 #define IGP01E1000_GMII_FLEX_SPD 0x10 /* Enable flexible speed
2839 * on Link-Up */
2840 #define IGP01E1000_GMII_SPD 0x20 /* Enable SPD */
2841
2842 /* IGP01E1000 Analog Register */
2843 #define IGP01E1000_ANALOG_SPARE_FUSE_STATUS 0x20D1
2844 #define IGP01E1000_ANALOG_FUSE_STATUS 0x20D0
2845 #define IGP01E1000_ANALOG_FUSE_CONTROL 0x20DC
2846 #define IGP01E1000_ANALOG_FUSE_BYPASS 0x20DE
2847
2848 #define IGP01E1000_ANALOG_FUSE_POLY_MASK 0xF000
2849 #define IGP01E1000_ANALOG_FUSE_FINE_MASK 0x0F80
2850 #define IGP01E1000_ANALOG_FUSE_COARSE_MASK 0x0070
2851 #define IGP01E1000_ANALOG_SPARE_FUSE_ENABLED 0x0100
2852 #define IGP01E1000_ANALOG_FUSE_ENABLE_SW_CONTROL 0x0002
2853
2854 #define IGP01E1000_ANALOG_FUSE_COARSE_THRESH 0x0040
2855 #define IGP01E1000_ANALOG_FUSE_COARSE_10 0x0010
2856 #define IGP01E1000_ANALOG_FUSE_FINE_1 0x0080
2857 #define IGP01E1000_ANALOG_FUSE_FINE_10 0x0500
2858
2859 /* Bit definitions for valid PHY IDs. */
2860 /* I = Integrated
2861 * E = External
2862 */
2863 #define M88_VENDOR 0x0141
2864 #define M88E1000_E_PHY_ID 0x01410C50
2865 #define M88E1000_I_PHY_ID 0x01410C30
2866 #define M88E1011_I_PHY_ID 0x01410C20
2867 #define IGP01E1000_I_PHY_ID 0x02A80380
2868 #define M88E1000_12_PHY_ID M88E1000_E_PHY_ID
2869 #define M88E1000_14_PHY_ID M88E1000_E_PHY_ID
2870 #define M88E1011_I_REV_4 0x04
2871 #define M88E1111_I_PHY_ID 0x01410CC0
2872 #define L1LXT971A_PHY_ID 0x001378E0
2873
2874 /* Bits...
2875 * 15-5: page
2876 * 4-0: register offset
2877 */
2878 #define PHY_PAGE_SHIFT 5
2879 #define PHY_REG(page, reg) \
2880 (((page) << PHY_PAGE_SHIFT) | ((reg) & MAX_PHY_REG_ADDRESS))
2881
2882 #define IGP3_PHY_PORT_CTRL \
2883 PHY_REG(769, 17) /* Port General Configuration */
2884 #define IGP3_PHY_RATE_ADAPT_CTRL \
2885 PHY_REG(769, 25) /* Rate Adapter Control Register */
2886
2887 #define IGP3_KMRN_FIFO_CTRL_STATS \
2888 PHY_REG(770, 16) /* KMRN FIFO's control/status register */
2889 #define IGP3_KMRN_POWER_MNG_CTRL \
2890 PHY_REG(770, 17) /* KMRN Power Management Control Register */
2891 #define IGP3_KMRN_INBAND_CTRL \
2892 PHY_REG(770, 18) /* KMRN Inband Control Register */
2893 #define IGP3_KMRN_DIAG \
2894 PHY_REG(770, 19) /* KMRN Diagnostic register */
2895 #define IGP3_KMRN_DIAG_PCS_LOCK_LOSS 0x0002 /* RX PCS is not synced */
2896 #define IGP3_KMRN_ACK_TIMEOUT \
2897 PHY_REG(770, 20) /* KMRN Acknowledge Timeouts register */
2898
2899 #define IGP3_VR_CTRL \
2900 PHY_REG(776, 18) /* Voltage regulator control register */
2901 #define IGP3_VR_CTRL_MODE_SHUT 0x0200 /* Enter powerdown, shutdown VRs */
2902 #define IGP3_VR_CTRL_MODE_MASK 0x0300 /* Shutdown VR Mask */
2903
2904 #define IGP3_CAPABILITY \
2905 PHY_REG(776, 19) /* IGP3 Capability Register */
2906
2907 /* Capabilities for SKU Control */
2908 #define IGP3_CAP_INITIATE_TEAM 0x0001 /* Able to initiate a team */
2909 #define IGP3_CAP_WFM 0x0002 /* Support WoL and PXE */
2910 #define IGP3_CAP_ASF 0x0004 /* Support ASF */
2911 #define IGP3_CAP_LPLU 0x0008 /* Support Low Power Link Up */
2912 #define IGP3_CAP_DC_AUTO_SPEED 0x0010 /* Support AC/DC Auto Link Speed */
2913 #define IGP3_CAP_SPD 0x0020 /* Support Smart Power Down */
2914 #define IGP3_CAP_MULT_QUEUE 0x0040 /* Support 2 tx & 2 rx queues */
2915 #define IGP3_CAP_RSS 0x0080 /* Support RSS */
2916 #define IGP3_CAP_8021PQ 0x0100 /* Support 802.1Q & 802.1p */
2917 #define IGP3_CAP_AMT_CB 0x0200 /* Support active manageability and circuit breaker */
2918
2919 #define IGP3_PPC_JORDAN_EN 0x0001
2920 #define IGP3_PPC_JORDAN_GIGA_SPEED 0x0002
2921
2922 #define IGP3_KMRN_PMC_EE_IDLE_LINK_DIS 0x0001
2923 #define IGP3_KMRN_PMC_K0S_ENTRY_LATENCY_MASK 0x001E
2924 #define IGP3_KMRN_PMC_K0S_MODE1_EN_GIGA 0x0020
2925 #define IGP3_KMRN_PMC_K0S_MODE1_EN_100 0x0040
2926
2927 #define IGP3E1000_PHY_MISC_CTRL 0x1B /* Misc. Ctrl register */
2928 #define IGP3_PHY_MISC_DUPLEX_MANUAL_SET 0x1000 /* Duplex Manual Set */
2929
2930 #define IGP3_KMRN_EXT_CTRL PHY_REG(770, 18)
2931 #define IGP3_KMRN_EC_DIS_INBAND 0x0080
2932
2933 #define IGP03E1000_E_PHY_ID 0x02A80390
2934 #define IFE_E_PHY_ID 0x02A80330 /* 10/100 PHY */
2935 #define IFE_PLUS_E_PHY_ID 0x02A80320
2936 #define IFE_C_E_PHY_ID 0x02A80310
2937
2938 #define IFE_PHY_EXTENDED_STATUS_CONTROL 0x10 /* 100BaseTx Extended Status, Control and Address */
2939 #define IFE_PHY_SPECIAL_CONTROL 0x11 /* 100BaseTx PHY special control register */
2940 #define IFE_PHY_RCV_FALSE_CARRIER 0x13 /* 100BaseTx Receive False Carrier Counter */
2941 #define IFE_PHY_RCV_DISCONNECT 0x14 /* 100BaseTx Receive Disconnect Counter */
2942 #define IFE_PHY_RCV_ERROT_FRAME 0x15 /* 100BaseTx Receive Error Frame Counter */
2943 #define IFE_PHY_RCV_SYMBOL_ERR 0x16 /* Receive Symbol Error Counter */
2944 #define IFE_PHY_PREM_EOF_ERR 0x17 /* 100BaseTx Receive Premature End Of Frame Error Counter */
2945 #define IFE_PHY_RCV_EOF_ERR 0x18 /* 10BaseT Receive End Of Frame Error Counter */
2946 #define IFE_PHY_TX_JABBER_DETECT 0x19 /* 10BaseT Transmit Jabber Detect Counter */
2947 #define IFE_PHY_EQUALIZER 0x1A /* PHY Equalizer Control and Status */
2948 #define IFE_PHY_SPECIAL_CONTROL_LED 0x1B /* PHY special control and LED configuration */
2949 #define IFE_PHY_MDIX_CONTROL 0x1C /* MDI/MDI-X Control register */
2950 #define IFE_PHY_HWI_CONTROL 0x1D /* Hardware Integrity Control (HWI) */
2951
2952 #define IFE_PESC_REDUCED_POWER_DOWN_DISABLE 0x2000 /* Default 1 = Disable auto reduced power down */
2953 #define IFE_PESC_100BTX_POWER_DOWN 0x0400 /* Indicates the power state of 100BASE-TX */
2954 #define IFE_PESC_10BTX_POWER_DOWN 0x0200 /* Indicates the power state of 10BASE-T */
2955 #define IFE_PESC_POLARITY_REVERSED 0x0100 /* Indicates 10BASE-T polarity */
2956 #define IFE_PESC_PHY_ADDR_MASK 0x007C /* Bit 6:2 for sampled PHY address */
2957 #define IFE_PESC_SPEED 0x0002 /* Auto-negotiation speed result 1=100Mbs, 0=10Mbs */
2958 #define IFE_PESC_DUPLEX 0x0001 /* Auto-negotiation duplex result 1=Full, 0=Half */
2959 #define IFE_PESC_POLARITY_REVERSED_SHIFT 8
2960
2961 #define IFE_PSC_DISABLE_DYNAMIC_POWER_DOWN 0x0100 /* 1 = Dynamic Power Down disabled */
2962 #define IFE_PSC_FORCE_POLARITY 0x0020 /* 1=Reversed Polarity, 0=Normal */
2963 #define IFE_PSC_AUTO_POLARITY_DISABLE 0x0010 /* 1=Auto Polarity Disabled, 0=Enabled */
2964 #define IFE_PSC_JABBER_FUNC_DISABLE 0x0001 /* 1=Jabber Disabled, 0=Normal Jabber Operation */
2965 #define IFE_PSC_FORCE_POLARITY_SHIFT 5
2966 #define IFE_PSC_AUTO_POLARITY_DISABLE_SHIFT 4
2967
2968 #define IFE_PMC_AUTO_MDIX 0x0080 /* 1=enable MDI/MDI-X feature, default 0=disabled */
2969 #define IFE_PMC_FORCE_MDIX 0x0040 /* 1=force MDIX-X, 0=force MDI */
2970 #define IFE_PMC_MDIX_STATUS 0x0020 /* 1=MDI-X, 0=MDI */
2971 #define IFE_PMC_AUTO_MDIX_COMPLETE 0x0010 /* Resolution algorithm is completed */
2972 #define IFE_PMC_MDIX_MODE_SHIFT 6
2973 #define IFE_PHC_MDIX_RESET_ALL_MASK 0x0000 /* Disable auto MDI-X */
2974
2975 #define IFE_PHC_HWI_ENABLE 0x8000 /* Enable the HWI feature */
2976 #define IFE_PHC_ABILITY_CHECK 0x4000 /* 1= Test Passed, 0=failed */
2977 #define IFE_PHC_TEST_EXEC 0x2000 /* PHY launch test pulses on the wire */
2978 #define IFE_PHC_HIGHZ 0x0200 /* 1 = Open Circuit */
2979 #define IFE_PHC_LOWZ 0x0400 /* 1 = Short Circuit */
2980 #define IFE_PHC_LOW_HIGH_Z_MASK 0x0600 /* Mask for indication type of problem on the line */
2981 #define IFE_PHC_DISTANCE_MASK 0x01FF /* Mask for distance to the cable problem, in 80cm granularity */
2982 #define IFE_PHC_RESET_ALL_MASK 0x0000 /* Disable HWI */
2983 #define IFE_PSCL_PROBE_MODE 0x0020 /* LED Probe mode */
2984 #define IFE_PSCL_PROBE_LEDS_OFF 0x0006 /* Force LEDs 0 and 2 off */
2985 #define IFE_PSCL_PROBE_LEDS_ON 0x0007 /* Force LEDs 0 and 2 on */
2986
2987 #define ICH_FLASH_COMMAND_TIMEOUT 5000 /* 5000 uSecs - adjusted */
2988 #define ICH_FLASH_ERASE_TIMEOUT 3000000 /* Up to 3 seconds - worst case */
2989 #define ICH_FLASH_CYCLE_REPEAT_COUNT 10 /* 10 cycles */
2990 #define ICH_FLASH_SEG_SIZE_256 256
2991 #define ICH_FLASH_SEG_SIZE_4K 4096
2992 #define ICH_FLASH_SEG_SIZE_64K 65536
2993
2994 #define ICH_CYCLE_READ 0x0
2995 #define ICH_CYCLE_RESERVED 0x1
2996 #define ICH_CYCLE_WRITE 0x2
2997 #define ICH_CYCLE_ERASE 0x3
2998
2999 #define ICH_FLASH_GFPREG 0x0000
3000 #define ICH_FLASH_HSFSTS 0x0004
3001 #define ICH_FLASH_HSFCTL 0x0006
3002 #define ICH_FLASH_FADDR 0x0008
3003 #define ICH_FLASH_FDATA0 0x0010
3004 #define ICH_FLASH_FRACC 0x0050
3005 #define ICH_FLASH_FREG0 0x0054
3006 #define ICH_FLASH_FREG1 0x0058
3007 #define ICH_FLASH_FREG2 0x005C
3008 #define ICH_FLASH_FREG3 0x0060
3009 #define ICH_FLASH_FPR0 0x0074
3010 #define ICH_FLASH_FPR1 0x0078
3011 #define ICH_FLASH_SSFSTS 0x0090
3012 #define ICH_FLASH_SSFCTL 0x0092
3013 #define ICH_FLASH_PREOP 0x0094
3014 #define ICH_FLASH_OPTYPE 0x0096
3015 #define ICH_FLASH_OPMENU 0x0098
3016
3017 #define ICH_FLASH_REG_MAPSIZE 0x00A0
3018 #define ICH_FLASH_SECTOR_SIZE 4096
3019 #define ICH_GFPREG_BASE_MASK 0x1FFF
3020 #define ICH_FLASH_LINEAR_ADDR_MASK 0x00FFFFFF
3021
3022 /* Miscellaneous PHY bit definitions. */
3023 #define PHY_PREAMBLE 0xFFFFFFFF
3024 #define PHY_SOF 0x01
3025 #define PHY_OP_READ 0x02
3026 #define PHY_OP_WRITE 0x01
3027 #define PHY_TURNAROUND 0x02
3028 #define PHY_PREAMBLE_SIZE 32
3029 #define MII_CR_SPEED_1000 0x0040
3030 #define MII_CR_SPEED_100 0x2000
3031 #define MII_CR_SPEED_10 0x0000
3032 #define E1000_PHY_ADDRESS 0x01
3033 #define PHY_AUTO_NEG_TIME 45 /* 4.5 Seconds */
3034 #define PHY_FORCE_TIME 20 /* 2.0 Seconds */
3035 #define PHY_REVISION_MASK 0xFFFFFFF0
3036 #define DEVICE_SPEED_MASK 0x00000300 /* Device Ctrl Reg Speed Mask */
3037 #define REG4_SPEED_MASK 0x01E0
3038 #define REG9_SPEED_MASK 0x0300
3039 #define ADVERTISE_10_HALF 0x0001
3040 #define ADVERTISE_10_FULL 0x0002
3041 #define ADVERTISE_100_HALF 0x0004
3042 #define ADVERTISE_100_FULL 0x0008
3043 #define ADVERTISE_1000_HALF 0x0010
3044 #define ADVERTISE_1000_FULL 0x0020
3045 #define AUTONEG_ADVERTISE_SPEED_DEFAULT 0x002F /* Everything but 1000-Half */
3046 #define AUTONEG_ADVERTISE_10_100_ALL 0x000F /* All 10/100 speeds */
3047 #define AUTONEG_ADVERTISE_10_ALL 0x0003 /* 10Mbps Full & Half speeds */
3048
3049 #endif /* _E1000_HW_H_ */
Linux kernel - Deliverables
This page took 0.172221 seconds and 5 git commands to generate.