2 * This file is part of the Chelsio T4 PCI-E SR-IOV Virtual Function Ethernet
5 * Copyright (c) 2009-2010 Chelsio Communications, Inc. All rights reserved.
7 * This software is available to you under a choice of one of two
8 * licenses. You may choose to be licensed under the terms of the GNU
9 * General Public License (GPL) Version 2, available from the file
10 * COPYING in the main directory of this source tree, or the
11 * OpenIB.org BSD license below:
13 * Redistribution and use in source and binary forms, with or
14 * without modification, are permitted provided that the following
17 * - Redistributions of source code must retain the above
18 * copyright notice, this list of conditions and the following
21 * - Redistributions in binary form must reproduce the above
22 * copyright notice, this list of conditions and the following
23 * disclaimer in the documentation and/or other materials
24 * provided with the distribution.
26 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
27 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
28 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
29 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
30 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
31 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
32 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
36 #include <linux/pci.h>
38 #include "t4vf_common.h"
39 #include "t4vf_defs.h"
41 #include "../cxgb4/t4_regs.h"
42 #include "../cxgb4/t4_values.h"
43 #include "../cxgb4/t4fw_api.h"
46 * Wait for the device to become ready (signified by our "who am I" register
47 * returning a value other than all 1's). Return an error if it doesn't
50 int t4vf_wait_dev_ready(struct adapter
*adapter
)
52 const u32 whoami
= T4VF_PL_BASE_ADDR
+ PL_VF_WHOAMI
;
53 const u32 notready1
= 0xffffffff;
54 const u32 notready2
= 0xeeeeeeee;
57 val
= t4_read_reg(adapter
, whoami
);
58 if (val
!= notready1
&& val
!= notready2
)
61 val
= t4_read_reg(adapter
, whoami
);
62 if (val
!= notready1
&& val
!= notready2
)
69 * Get the reply to a mailbox command and store it in @rpl in big-endian order
70 * (since the firmware data structures are specified in a big-endian layout).
72 static void get_mbox_rpl(struct adapter
*adapter
, __be64
*rpl
, int size
,
75 for ( ; size
; size
-= 8, mbox_data
+= 8)
76 *rpl
++ = cpu_to_be64(t4_read_reg64(adapter
, mbox_data
));
80 * t4vf_record_mbox - record a Firmware Mailbox Command/Reply in the log
81 * @adapter: the adapter
82 * @cmd: the Firmware Mailbox Command or Reply
83 * @size: command length in bytes
84 * @access: the time (ms) needed to access the Firmware Mailbox
85 * @execute: the time (ms) the command spent being executed
87 static void t4vf_record_mbox(struct adapter
*adapter
, const __be64
*cmd
,
88 int size
, int access
, int execute
)
90 struct mbox_cmd_log
*log
= adapter
->mbox_log
;
91 struct mbox_cmd
*entry
;
94 entry
= mbox_cmd_log_entry(log
, log
->cursor
++);
95 if (log
->cursor
== log
->size
)
98 for (i
= 0; i
< size
/ 8; i
++)
99 entry
->cmd
[i
] = be64_to_cpu(cmd
[i
]);
100 while (i
< MBOX_LEN
/ 8)
102 entry
->timestamp
= jiffies
;
103 entry
->seqno
= log
->seqno
++;
104 entry
->access
= access
;
105 entry
->execute
= execute
;
109 * t4vf_wr_mbox_core - send a command to FW through the mailbox
110 * @adapter: the adapter
111 * @cmd: the command to write
112 * @size: command length in bytes
113 * @rpl: where to optionally store the reply
114 * @sleep_ok: if true we may sleep while awaiting command completion
116 * Sends the given command to FW through the mailbox and waits for the
117 * FW to execute the command. If @rpl is not %NULL it is used to store
118 * the FW's reply to the command. The command and its optional reply
119 * are of the same length. FW can take up to 500 ms to respond.
120 * @sleep_ok determines whether we may sleep while awaiting the response.
121 * If sleeping is allowed we use progressive backoff otherwise we spin.
123 * The return value is 0 on success or a negative errno on failure. A
124 * failure can happen either because we are not able to execute the
125 * command or FW executes it but signals an error. In the latter case
126 * the return value is the error code indicated by FW (negated).
128 int t4vf_wr_mbox_core(struct adapter
*adapter
, const void *cmd
, int size
,
129 void *rpl
, bool sleep_ok
)
131 static const int delay
[] = {
132 1, 1, 3, 5, 10, 10, 20, 50, 100
135 u16 access
= 0, execute
= 0;
137 int i
, ms
, delay_idx
, ret
;
139 u32 mbox_ctl
= T4VF_CIM_BASE_ADDR
+ CIM_VF_EXT_MAILBOX_CTRL
;
140 u32 cmd_op
= FW_CMD_OP_G(be32_to_cpu(((struct fw_cmd_hdr
*)cmd
)->hi
));
141 __be64 cmd_rpl
[MBOX_LEN
/ 8];
142 struct mbox_list entry
;
144 /* In T6, mailbox size is changed to 128 bytes to avoid
145 * invalidating the entire prefetch buffer.
147 if (CHELSIO_CHIP_VERSION(adapter
->params
.chip
) <= CHELSIO_T5
)
148 mbox_data
= T4VF_MBDATA_BASE_ADDR
;
150 mbox_data
= T6VF_MBDATA_BASE_ADDR
;
153 * Commands must be multiples of 16 bytes in length and may not be
154 * larger than the size of the Mailbox Data register array.
156 if ((size
% 16) != 0 ||
157 size
> NUM_CIM_VF_MAILBOX_DATA_INSTANCES
* 4)
160 /* Queue ourselves onto the mailbox access list. When our entry is at
161 * the front of the list, we have rights to access the mailbox. So we
162 * wait [for a while] till we're at the front [or bail out with an
165 spin_lock(&adapter
->mbox_lock
);
166 list_add_tail(&entry
.list
, &adapter
->mlist
.list
);
167 spin_unlock(&adapter
->mbox_lock
);
172 for (i
= 0; ; i
+= ms
) {
173 /* If we've waited too long, return a busy indication. This
174 * really ought to be based on our initial position in the
175 * mailbox access list but this is a start. We very rearely
176 * contend on access to the mailbox ...
178 if (i
> FW_CMD_MAX_TIMEOUT
) {
179 spin_lock(&adapter
->mbox_lock
);
180 list_del(&entry
.list
);
181 spin_unlock(&adapter
->mbox_lock
);
183 t4vf_record_mbox(adapter
, cmd
, size
, access
, ret
);
187 /* If we're at the head, break out and start the mailbox
190 if (list_first_entry(&adapter
->mlist
.list
, struct mbox_list
,
194 /* Delay for a bit before checking again ... */
196 ms
= delay
[delay_idx
]; /* last element may repeat */
197 if (delay_idx
< ARRAY_SIZE(delay
) - 1)
206 * Loop trying to get ownership of the mailbox. Return an error
207 * if we can't gain ownership.
209 v
= MBOWNER_G(t4_read_reg(adapter
, mbox_ctl
));
210 for (i
= 0; v
== MBOX_OWNER_NONE
&& i
< 3; i
++)
211 v
= MBOWNER_G(t4_read_reg(adapter
, mbox_ctl
));
212 if (v
!= MBOX_OWNER_DRV
) {
213 spin_lock(&adapter
->mbox_lock
);
214 list_del(&entry
.list
);
215 spin_unlock(&adapter
->mbox_lock
);
216 ret
= (v
== MBOX_OWNER_FW
) ? -EBUSY
: -ETIMEDOUT
;
217 t4vf_record_mbox(adapter
, cmd
, size
, access
, ret
);
222 * Write the command array into the Mailbox Data register array and
223 * transfer ownership of the mailbox to the firmware.
225 * For the VFs, the Mailbox Data "registers" are actually backed by
226 * T4's "MA" interface rather than PL Registers (as is the case for
227 * the PFs). Because these are in different coherency domains, the
228 * write to the VF's PL-register-backed Mailbox Control can race in
229 * front of the writes to the MA-backed VF Mailbox Data "registers".
230 * So we need to do a read-back on at least one byte of the VF Mailbox
231 * Data registers before doing the write to the VF Mailbox Control
234 if (cmd_op
!= FW_VI_STATS_CMD
)
235 t4vf_record_mbox(adapter
, cmd
, size
, access
, 0);
236 for (i
= 0, p
= cmd
; i
< size
; i
+= 8)
237 t4_write_reg64(adapter
, mbox_data
+ i
, be64_to_cpu(*p
++));
238 t4_read_reg(adapter
, mbox_data
); /* flush write */
240 t4_write_reg(adapter
, mbox_ctl
,
241 MBMSGVALID_F
| MBOWNER_V(MBOX_OWNER_FW
));
242 t4_read_reg(adapter
, mbox_ctl
); /* flush write */
245 * Spin waiting for firmware to acknowledge processing our command.
250 for (i
= 0; i
< FW_CMD_MAX_TIMEOUT
; i
+= ms
) {
252 ms
= delay
[delay_idx
];
253 if (delay_idx
< ARRAY_SIZE(delay
) - 1)
260 * If we're the owner, see if this is the reply we wanted.
262 v
= t4_read_reg(adapter
, mbox_ctl
);
263 if (MBOWNER_G(v
) == MBOX_OWNER_DRV
) {
265 * If the Message Valid bit isn't on, revoke ownership
266 * of the mailbox and continue waiting for our reply.
268 if ((v
& MBMSGVALID_F
) == 0) {
269 t4_write_reg(adapter
, mbox_ctl
,
270 MBOWNER_V(MBOX_OWNER_NONE
));
275 * We now have our reply. Extract the command return
276 * value, copy the reply back to our caller's buffer
277 * (if specified) and revoke ownership of the mailbox.
278 * We return the (negated) firmware command return
279 * code (this depends on FW_SUCCESS == 0).
281 get_mbox_rpl(adapter
, cmd_rpl
, size
, mbox_data
);
283 /* return value in low-order little-endian word */
284 v
= be64_to_cpu(cmd_rpl
[0]);
287 /* request bit in high-order BE word */
288 WARN_ON((be32_to_cpu(*(const __be32
*)cmd
)
289 & FW_CMD_REQUEST_F
) == 0);
290 memcpy(rpl
, cmd_rpl
, size
);
291 WARN_ON((be32_to_cpu(*(__be32
*)rpl
)
292 & FW_CMD_REQUEST_F
) != 0);
294 t4_write_reg(adapter
, mbox_ctl
,
295 MBOWNER_V(MBOX_OWNER_NONE
));
297 if (cmd_op
!= FW_VI_STATS_CMD
)
298 t4vf_record_mbox(adapter
, cmd_rpl
, size
, access
,
300 spin_lock(&adapter
->mbox_lock
);
301 list_del(&entry
.list
);
302 spin_unlock(&adapter
->mbox_lock
);
303 return -FW_CMD_RETVAL_G(v
);
307 /* We timed out. Return the error ... */
309 t4vf_record_mbox(adapter
, cmd
, size
, access
, ret
);
310 spin_lock(&adapter
->mbox_lock
);
311 list_del(&entry
.list
);
312 spin_unlock(&adapter
->mbox_lock
);
316 #define ADVERT_MASK (FW_PORT_CAP_SPEED_100M | FW_PORT_CAP_SPEED_1G |\
317 FW_PORT_CAP_SPEED_10G | FW_PORT_CAP_SPEED_40G | \
318 FW_PORT_CAP_SPEED_100G | FW_PORT_CAP_ANEG)
321 * init_link_config - initialize a link's SW state
322 * @lc: structure holding the link state
323 * @caps: link capabilities
325 * Initializes the SW state maintained for each link, including the link's
326 * capabilities and default speed/flow-control/autonegotiation settings.
328 static void init_link_config(struct link_config
*lc
, unsigned int caps
)
330 lc
->supported
= caps
;
331 lc
->lp_advertising
= 0;
332 lc
->requested_speed
= 0;
334 lc
->requested_fc
= lc
->fc
= PAUSE_RX
| PAUSE_TX
;
335 if (lc
->supported
& FW_PORT_CAP_ANEG
) {
336 lc
->advertising
= lc
->supported
& ADVERT_MASK
;
337 lc
->autoneg
= AUTONEG_ENABLE
;
338 lc
->requested_fc
|= PAUSE_AUTONEG
;
341 lc
->autoneg
= AUTONEG_DISABLE
;
346 * t4vf_port_init - initialize port hardware/software state
347 * @adapter: the adapter
348 * @pidx: the adapter port index
350 int t4vf_port_init(struct adapter
*adapter
, int pidx
)
352 struct port_info
*pi
= adap2pinfo(adapter
, pidx
);
353 struct fw_vi_cmd vi_cmd
, vi_rpl
;
354 struct fw_port_cmd port_cmd
, port_rpl
;
358 * Execute a VI Read command to get our Virtual Interface information
359 * like MAC address, etc.
361 memset(&vi_cmd
, 0, sizeof(vi_cmd
));
362 vi_cmd
.op_to_vfn
= cpu_to_be32(FW_CMD_OP_V(FW_VI_CMD
) |
365 vi_cmd
.alloc_to_len16
= cpu_to_be32(FW_LEN16(vi_cmd
));
366 vi_cmd
.type_viid
= cpu_to_be16(FW_VI_CMD_VIID_V(pi
->viid
));
367 v
= t4vf_wr_mbox(adapter
, &vi_cmd
, sizeof(vi_cmd
), &vi_rpl
);
371 BUG_ON(pi
->port_id
!= FW_VI_CMD_PORTID_G(vi_rpl
.portid_pkd
));
372 pi
->rss_size
= FW_VI_CMD_RSSSIZE_G(be16_to_cpu(vi_rpl
.rsssize_pkd
));
373 t4_os_set_hw_addr(adapter
, pidx
, vi_rpl
.mac
);
376 * If we don't have read access to our port information, we're done
377 * now. Otherwise, execute a PORT Read command to get it ...
379 if (!(adapter
->params
.vfres
.r_caps
& FW_CMD_CAP_PORT
))
382 memset(&port_cmd
, 0, sizeof(port_cmd
));
383 port_cmd
.op_to_portid
= cpu_to_be32(FW_CMD_OP_V(FW_PORT_CMD
) |
386 FW_PORT_CMD_PORTID_V(pi
->port_id
));
387 port_cmd
.action_to_len16
=
388 cpu_to_be32(FW_PORT_CMD_ACTION_V(FW_PORT_ACTION_GET_PORT_INFO
) |
390 v
= t4vf_wr_mbox(adapter
, &port_cmd
, sizeof(port_cmd
), &port_rpl
);
394 v
= be32_to_cpu(port_rpl
.u
.info
.lstatus_to_modtype
);
395 pi
->mdio_addr
= (v
& FW_PORT_CMD_MDIOCAP_F
) ?
396 FW_PORT_CMD_MDIOADDR_G(v
) : -1;
397 pi
->port_type
= FW_PORT_CMD_PTYPE_G(v
);
398 pi
->mod_type
= FW_PORT_MOD_TYPE_NA
;
400 init_link_config(&pi
->link_cfg
, be16_to_cpu(port_rpl
.u
.info
.pcap
));
406 * t4vf_fw_reset - issue a reset to FW
407 * @adapter: the adapter
409 * Issues a reset command to FW. For a Physical Function this would
410 * result in the Firmware resetting all of its state. For a Virtual
411 * Function this just resets the state associated with the VF.
413 int t4vf_fw_reset(struct adapter
*adapter
)
415 struct fw_reset_cmd cmd
;
417 memset(&cmd
, 0, sizeof(cmd
));
418 cmd
.op_to_write
= cpu_to_be32(FW_CMD_OP_V(FW_RESET_CMD
) |
420 cmd
.retval_len16
= cpu_to_be32(FW_LEN16(cmd
));
421 return t4vf_wr_mbox(adapter
, &cmd
, sizeof(cmd
), NULL
);
425 * t4vf_query_params - query FW or device parameters
426 * @adapter: the adapter
427 * @nparams: the number of parameters
428 * @params: the parameter names
429 * @vals: the parameter values
431 * Reads the values of firmware or device parameters. Up to 7 parameters
432 * can be queried at once.
434 static int t4vf_query_params(struct adapter
*adapter
, unsigned int nparams
,
435 const u32
*params
, u32
*vals
)
438 struct fw_params_cmd cmd
, rpl
;
439 struct fw_params_param
*p
;
445 memset(&cmd
, 0, sizeof(cmd
));
446 cmd
.op_to_vfn
= cpu_to_be32(FW_CMD_OP_V(FW_PARAMS_CMD
) |
449 len16
= DIV_ROUND_UP(offsetof(struct fw_params_cmd
,
450 param
[nparams
].mnem
), 16);
451 cmd
.retval_len16
= cpu_to_be32(FW_CMD_LEN16_V(len16
));
452 for (i
= 0, p
= &cmd
.param
[0]; i
< nparams
; i
++, p
++)
453 p
->mnem
= htonl(*params
++);
455 ret
= t4vf_wr_mbox(adapter
, &cmd
, sizeof(cmd
), &rpl
);
457 for (i
= 0, p
= &rpl
.param
[0]; i
< nparams
; i
++, p
++)
458 *vals
++ = be32_to_cpu(p
->val
);
463 * t4vf_set_params - sets FW or device parameters
464 * @adapter: the adapter
465 * @nparams: the number of parameters
466 * @params: the parameter names
467 * @vals: the parameter values
469 * Sets the values of firmware or device parameters. Up to 7 parameters
470 * can be specified at once.
472 int t4vf_set_params(struct adapter
*adapter
, unsigned int nparams
,
473 const u32
*params
, const u32
*vals
)
476 struct fw_params_cmd cmd
;
477 struct fw_params_param
*p
;
483 memset(&cmd
, 0, sizeof(cmd
));
484 cmd
.op_to_vfn
= cpu_to_be32(FW_CMD_OP_V(FW_PARAMS_CMD
) |
487 len16
= DIV_ROUND_UP(offsetof(struct fw_params_cmd
,
488 param
[nparams
]), 16);
489 cmd
.retval_len16
= cpu_to_be32(FW_CMD_LEN16_V(len16
));
490 for (i
= 0, p
= &cmd
.param
[0]; i
< nparams
; i
++, p
++) {
491 p
->mnem
= cpu_to_be32(*params
++);
492 p
->val
= cpu_to_be32(*vals
++);
495 return t4vf_wr_mbox(adapter
, &cmd
, sizeof(cmd
), NULL
);
499 * t4vf_fl_pkt_align - return the fl packet alignment
500 * @adapter: the adapter
502 * T4 has a single field to specify the packing and padding boundary.
503 * T5 onwards has separate fields for this and hence the alignment for
504 * next packet offset is maximum of these two. And T6 changes the
505 * Ingress Padding Boundary Shift, so it's all a mess and it's best
506 * if we put this in low-level Common Code ...
509 int t4vf_fl_pkt_align(struct adapter
*adapter
)
511 u32 sge_control
, sge_control2
;
512 unsigned int ingpadboundary
, ingpackboundary
, fl_align
, ingpad_shift
;
514 sge_control
= adapter
->params
.sge
.sge_control
;
516 /* T4 uses a single control field to specify both the PCIe Padding and
517 * Packing Boundary. T5 introduced the ability to specify these
518 * separately. The actual Ingress Packet Data alignment boundary
519 * within Packed Buffer Mode is the maximum of these two
520 * specifications. (Note that it makes no real practical sense to
521 * have the Pading Boudary be larger than the Packing Boundary but you
522 * could set the chip up that way and, in fact, legacy T4 code would
523 * end doing this because it would initialize the Padding Boundary and
524 * leave the Packing Boundary initialized to 0 (16 bytes).)
525 * Padding Boundary values in T6 starts from 8B,
526 * where as it is 32B for T4 and T5.
528 if (CHELSIO_CHIP_VERSION(adapter
->params
.chip
) <= CHELSIO_T5
)
529 ingpad_shift
= INGPADBOUNDARY_SHIFT_X
;
531 ingpad_shift
= T6_INGPADBOUNDARY_SHIFT_X
;
533 ingpadboundary
= 1 << (INGPADBOUNDARY_G(sge_control
) + ingpad_shift
);
535 fl_align
= ingpadboundary
;
536 if (!is_t4(adapter
->params
.chip
)) {
537 /* T5 has a different interpretation of one of the PCIe Packing
540 sge_control2
= adapter
->params
.sge
.sge_control2
;
541 ingpackboundary
= INGPACKBOUNDARY_G(sge_control2
);
542 if (ingpackboundary
== INGPACKBOUNDARY_16B_X
)
543 ingpackboundary
= 16;
545 ingpackboundary
= 1 << (ingpackboundary
+
546 INGPACKBOUNDARY_SHIFT_X
);
548 fl_align
= max(ingpadboundary
, ingpackboundary
);
554 * t4vf_bar2_sge_qregs - return BAR2 SGE Queue register information
555 * @adapter: the adapter
557 * @qtype: the Ingress or Egress type for @qid
558 * @pbar2_qoffset: BAR2 Queue Offset
559 * @pbar2_qid: BAR2 Queue ID or 0 for Queue ID inferred SGE Queues
561 * Returns the BAR2 SGE Queue Registers information associated with the
562 * indicated Absolute Queue ID. These are passed back in return value
563 * pointers. @qtype should be T4_BAR2_QTYPE_EGRESS for Egress Queue
564 * and T4_BAR2_QTYPE_INGRESS for Ingress Queues.
566 * This may return an error which indicates that BAR2 SGE Queue
567 * registers aren't available. If an error is not returned, then the
568 * following values are returned:
570 * *@pbar2_qoffset: the BAR2 Offset of the @qid Registers
571 * *@pbar2_qid: the BAR2 SGE Queue ID or 0 of @qid
573 * If the returned BAR2 Queue ID is 0, then BAR2 SGE registers which
574 * require the "Inferred Queue ID" ability may be used. E.g. the
575 * Write Combining Doorbell Buffer. If the BAR2 Queue ID is not 0,
576 * then these "Inferred Queue ID" register may not be used.
578 int t4vf_bar2_sge_qregs(struct adapter
*adapter
,
580 enum t4_bar2_qtype qtype
,
582 unsigned int *pbar2_qid
)
584 unsigned int page_shift
, page_size
, qpp_shift
, qpp_mask
;
585 u64 bar2_page_offset
, bar2_qoffset
;
586 unsigned int bar2_qid
, bar2_qid_offset
, bar2_qinferred
;
588 /* T4 doesn't support BAR2 SGE Queue registers.
590 if (is_t4(adapter
->params
.chip
))
593 /* Get our SGE Page Size parameters.
595 page_shift
= adapter
->params
.sge
.sge_vf_hps
+ 10;
596 page_size
= 1 << page_shift
;
598 /* Get the right Queues per Page parameters for our Queue.
600 qpp_shift
= (qtype
== T4_BAR2_QTYPE_EGRESS
601 ? adapter
->params
.sge
.sge_vf_eq_qpp
602 : adapter
->params
.sge
.sge_vf_iq_qpp
);
603 qpp_mask
= (1 << qpp_shift
) - 1;
605 /* Calculate the basics of the BAR2 SGE Queue register area:
606 * o The BAR2 page the Queue registers will be in.
607 * o The BAR2 Queue ID.
608 * o The BAR2 Queue ID Offset into the BAR2 page.
610 bar2_page_offset
= ((u64
)(qid
>> qpp_shift
) << page_shift
);
611 bar2_qid
= qid
& qpp_mask
;
612 bar2_qid_offset
= bar2_qid
* SGE_UDB_SIZE
;
614 /* If the BAR2 Queue ID Offset is less than the Page Size, then the
615 * hardware will infer the Absolute Queue ID simply from the writes to
616 * the BAR2 Queue ID Offset within the BAR2 Page (and we need to use a
617 * BAR2 Queue ID of 0 for those writes). Otherwise, we'll simply
618 * write to the first BAR2 SGE Queue Area within the BAR2 Page with
619 * the BAR2 Queue ID and the hardware will infer the Absolute Queue ID
620 * from the BAR2 Page and BAR2 Queue ID.
622 * One important censequence of this is that some BAR2 SGE registers
623 * have a "Queue ID" field and we can write the BAR2 SGE Queue ID
624 * there. But other registers synthesize the SGE Queue ID purely
625 * from the writes to the registers -- the Write Combined Doorbell
626 * Buffer is a good example. These BAR2 SGE Registers are only
627 * available for those BAR2 SGE Register areas where the SGE Absolute
628 * Queue ID can be inferred from simple writes.
630 bar2_qoffset
= bar2_page_offset
;
631 bar2_qinferred
= (bar2_qid_offset
< page_size
);
632 if (bar2_qinferred
) {
633 bar2_qoffset
+= bar2_qid_offset
;
637 *pbar2_qoffset
= bar2_qoffset
;
638 *pbar2_qid
= bar2_qid
;
642 unsigned int t4vf_get_pf_from_vf(struct adapter
*adapter
)
646 whoami
= t4_read_reg(adapter
, T4VF_PL_BASE_ADDR
+ PL_VF_WHOAMI_A
);
647 return (CHELSIO_CHIP_VERSION(adapter
->params
.chip
) <= CHELSIO_T5
?
648 SOURCEPF_G(whoami
) : T6_SOURCEPF_G(whoami
));
652 * t4vf_get_sge_params - retrieve adapter Scatter gather Engine parameters
653 * @adapter: the adapter
655 * Retrieves various core SGE parameters in the form of hardware SGE
656 * register values. The caller is responsible for decoding these as
657 * needed. The SGE parameters are stored in @adapter->params.sge.
659 int t4vf_get_sge_params(struct adapter
*adapter
)
661 struct sge_params
*sge_params
= &adapter
->params
.sge
;
662 u32 params
[7], vals
[7];
665 params
[0] = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_REG
) |
666 FW_PARAMS_PARAM_XYZ_V(SGE_CONTROL_A
));
667 params
[1] = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_REG
) |
668 FW_PARAMS_PARAM_XYZ_V(SGE_HOST_PAGE_SIZE_A
));
669 params
[2] = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_REG
) |
670 FW_PARAMS_PARAM_XYZ_V(SGE_FL_BUFFER_SIZE0_A
));
671 params
[3] = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_REG
) |
672 FW_PARAMS_PARAM_XYZ_V(SGE_FL_BUFFER_SIZE1_A
));
673 params
[4] = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_REG
) |
674 FW_PARAMS_PARAM_XYZ_V(SGE_TIMER_VALUE_0_AND_1_A
));
675 params
[5] = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_REG
) |
676 FW_PARAMS_PARAM_XYZ_V(SGE_TIMER_VALUE_2_AND_3_A
));
677 params
[6] = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_REG
) |
678 FW_PARAMS_PARAM_XYZ_V(SGE_TIMER_VALUE_4_AND_5_A
));
679 v
= t4vf_query_params(adapter
, 7, params
, vals
);
682 sge_params
->sge_control
= vals
[0];
683 sge_params
->sge_host_page_size
= vals
[1];
684 sge_params
->sge_fl_buffer_size
[0] = vals
[2];
685 sge_params
->sge_fl_buffer_size
[1] = vals
[3];
686 sge_params
->sge_timer_value_0_and_1
= vals
[4];
687 sge_params
->sge_timer_value_2_and_3
= vals
[5];
688 sge_params
->sge_timer_value_4_and_5
= vals
[6];
690 /* T4 uses a single control field to specify both the PCIe Padding and
691 * Packing Boundary. T5 introduced the ability to specify these
692 * separately with the Padding Boundary in SGE_CONTROL and and Packing
693 * Boundary in SGE_CONTROL2. So for T5 and later we need to grab
694 * SGE_CONTROL in order to determine how ingress packet data will be
695 * laid out in Packed Buffer Mode. Unfortunately, older versions of
696 * the firmware won't let us retrieve SGE_CONTROL2 so if we get a
697 * failure grabbing it we throw an error since we can't figure out the
700 if (!is_t4(adapter
->params
.chip
)) {
701 params
[0] = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_REG
) |
702 FW_PARAMS_PARAM_XYZ_V(SGE_CONTROL2_A
));
703 v
= t4vf_query_params(adapter
, 1, params
, vals
);
704 if (v
!= FW_SUCCESS
) {
705 dev_err(adapter
->pdev_dev
,
706 "Unable to get SGE Control2; "
707 "probably old firmware.\n");
710 sge_params
->sge_control2
= vals
[0];
713 params
[0] = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_REG
) |
714 FW_PARAMS_PARAM_XYZ_V(SGE_INGRESS_RX_THRESHOLD_A
));
715 params
[1] = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_REG
) |
716 FW_PARAMS_PARAM_XYZ_V(SGE_CONM_CTRL_A
));
717 v
= t4vf_query_params(adapter
, 2, params
, vals
);
720 sge_params
->sge_ingress_rx_threshold
= vals
[0];
721 sge_params
->sge_congestion_control
= vals
[1];
723 /* For T5 and later we want to use the new BAR2 Doorbells.
724 * Unfortunately, older firmware didn't allow the this register to be
727 if (!is_t4(adapter
->params
.chip
)) {
728 unsigned int pf
, s_hps
, s_qpp
;
730 params
[0] = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_REG
) |
731 FW_PARAMS_PARAM_XYZ_V(
732 SGE_EGRESS_QUEUES_PER_PAGE_VF_A
));
733 params
[1] = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_REG
) |
734 FW_PARAMS_PARAM_XYZ_V(
735 SGE_INGRESS_QUEUES_PER_PAGE_VF_A
));
736 v
= t4vf_query_params(adapter
, 2, params
, vals
);
737 if (v
!= FW_SUCCESS
) {
738 dev_warn(adapter
->pdev_dev
,
739 "Unable to get VF SGE Queues/Page; "
740 "probably old firmware.\n");
743 sge_params
->sge_egress_queues_per_page
= vals
[0];
744 sge_params
->sge_ingress_queues_per_page
= vals
[1];
746 /* We need the Queues/Page for our VF. This is based on the
747 * PF from which we're instantiated and is indexed in the
748 * register we just read. Do it once here so other code in
749 * the driver can just use it.
751 pf
= t4vf_get_pf_from_vf(adapter
);
752 s_hps
= (HOSTPAGESIZEPF0_S
+
753 (HOSTPAGESIZEPF1_S
- HOSTPAGESIZEPF0_S
) * pf
);
754 sge_params
->sge_vf_hps
=
755 ((sge_params
->sge_host_page_size
>> s_hps
)
756 & HOSTPAGESIZEPF0_M
);
758 s_qpp
= (QUEUESPERPAGEPF0_S
+
759 (QUEUESPERPAGEPF1_S
- QUEUESPERPAGEPF0_S
) * pf
);
760 sge_params
->sge_vf_eq_qpp
=
761 ((sge_params
->sge_egress_queues_per_page
>> s_qpp
)
762 & QUEUESPERPAGEPF0_M
);
763 sge_params
->sge_vf_iq_qpp
=
764 ((sge_params
->sge_ingress_queues_per_page
>> s_qpp
)
765 & QUEUESPERPAGEPF0_M
);
772 * t4vf_get_vpd_params - retrieve device VPD paremeters
773 * @adapter: the adapter
775 * Retrives various device Vital Product Data parameters. The parameters
776 * are stored in @adapter->params.vpd.
778 int t4vf_get_vpd_params(struct adapter
*adapter
)
780 struct vpd_params
*vpd_params
= &adapter
->params
.vpd
;
781 u32 params
[7], vals
[7];
784 params
[0] = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV
) |
785 FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_CCLK
));
786 v
= t4vf_query_params(adapter
, 1, params
, vals
);
789 vpd_params
->cclk
= vals
[0];
795 * t4vf_get_dev_params - retrieve device paremeters
796 * @adapter: the adapter
798 * Retrives various device parameters. The parameters are stored in
799 * @adapter->params.dev.
801 int t4vf_get_dev_params(struct adapter
*adapter
)
803 struct dev_params
*dev_params
= &adapter
->params
.dev
;
804 u32 params
[7], vals
[7];
807 params
[0] = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV
) |
808 FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_FWREV
));
809 params
[1] = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV
) |
810 FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_TPREV
));
811 v
= t4vf_query_params(adapter
, 2, params
, vals
);
814 dev_params
->fwrev
= vals
[0];
815 dev_params
->tprev
= vals
[1];
821 * t4vf_get_rss_glb_config - retrieve adapter RSS Global Configuration
822 * @adapter: the adapter
824 * Retrieves global RSS mode and parameters with which we have to live
825 * and stores them in the @adapter's RSS parameters.
827 int t4vf_get_rss_glb_config(struct adapter
*adapter
)
829 struct rss_params
*rss
= &adapter
->params
.rss
;
830 struct fw_rss_glb_config_cmd cmd
, rpl
;
834 * Execute an RSS Global Configuration read command to retrieve
835 * our RSS configuration.
837 memset(&cmd
, 0, sizeof(cmd
));
838 cmd
.op_to_write
= cpu_to_be32(FW_CMD_OP_V(FW_RSS_GLB_CONFIG_CMD
) |
841 cmd
.retval_len16
= cpu_to_be32(FW_LEN16(cmd
));
842 v
= t4vf_wr_mbox(adapter
, &cmd
, sizeof(cmd
), &rpl
);
847 * Transate the big-endian RSS Global Configuration into our
848 * cpu-endian format based on the RSS mode. We also do first level
849 * filtering at this point to weed out modes which don't support
852 rss
->mode
= FW_RSS_GLB_CONFIG_CMD_MODE_G(
853 be32_to_cpu(rpl
.u
.manual
.mode_pkd
));
855 case FW_RSS_GLB_CONFIG_CMD_MODE_BASICVIRTUAL
: {
856 u32 word
= be32_to_cpu(
857 rpl
.u
.basicvirtual
.synmapen_to_hashtoeplitz
);
859 rss
->u
.basicvirtual
.synmapen
=
860 ((word
& FW_RSS_GLB_CONFIG_CMD_SYNMAPEN_F
) != 0);
861 rss
->u
.basicvirtual
.syn4tupenipv6
=
862 ((word
& FW_RSS_GLB_CONFIG_CMD_SYN4TUPENIPV6_F
) != 0);
863 rss
->u
.basicvirtual
.syn2tupenipv6
=
864 ((word
& FW_RSS_GLB_CONFIG_CMD_SYN2TUPENIPV6_F
) != 0);
865 rss
->u
.basicvirtual
.syn4tupenipv4
=
866 ((word
& FW_RSS_GLB_CONFIG_CMD_SYN4TUPENIPV4_F
) != 0);
867 rss
->u
.basicvirtual
.syn2tupenipv4
=
868 ((word
& FW_RSS_GLB_CONFIG_CMD_SYN2TUPENIPV4_F
) != 0);
870 rss
->u
.basicvirtual
.ofdmapen
=
871 ((word
& FW_RSS_GLB_CONFIG_CMD_OFDMAPEN_F
) != 0);
873 rss
->u
.basicvirtual
.tnlmapen
=
874 ((word
& FW_RSS_GLB_CONFIG_CMD_TNLMAPEN_F
) != 0);
875 rss
->u
.basicvirtual
.tnlalllookup
=
876 ((word
& FW_RSS_GLB_CONFIG_CMD_TNLALLLKP_F
) != 0);
878 rss
->u
.basicvirtual
.hashtoeplitz
=
879 ((word
& FW_RSS_GLB_CONFIG_CMD_HASHTOEPLITZ_F
) != 0);
881 /* we need at least Tunnel Map Enable to be set */
882 if (!rss
->u
.basicvirtual
.tnlmapen
)
888 /* all unknown/unsupported RSS modes result in an error */
896 * t4vf_get_vfres - retrieve VF resource limits
897 * @adapter: the adapter
899 * Retrieves configured resource limits and capabilities for a virtual
900 * function. The results are stored in @adapter->vfres.
902 int t4vf_get_vfres(struct adapter
*adapter
)
904 struct vf_resources
*vfres
= &adapter
->params
.vfres
;
905 struct fw_pfvf_cmd cmd
, rpl
;
910 * Execute PFVF Read command to get VF resource limits; bail out early
911 * with error on command failure.
913 memset(&cmd
, 0, sizeof(cmd
));
914 cmd
.op_to_vfn
= cpu_to_be32(FW_CMD_OP_V(FW_PFVF_CMD
) |
917 cmd
.retval_len16
= cpu_to_be32(FW_LEN16(cmd
));
918 v
= t4vf_wr_mbox(adapter
, &cmd
, sizeof(cmd
), &rpl
);
923 * Extract VF resource limits and return success.
925 word
= be32_to_cpu(rpl
.niqflint_niq
);
926 vfres
->niqflint
= FW_PFVF_CMD_NIQFLINT_G(word
);
927 vfres
->niq
= FW_PFVF_CMD_NIQ_G(word
);
929 word
= be32_to_cpu(rpl
.type_to_neq
);
930 vfres
->neq
= FW_PFVF_CMD_NEQ_G(word
);
931 vfres
->pmask
= FW_PFVF_CMD_PMASK_G(word
);
933 word
= be32_to_cpu(rpl
.tc_to_nexactf
);
934 vfres
->tc
= FW_PFVF_CMD_TC_G(word
);
935 vfres
->nvi
= FW_PFVF_CMD_NVI_G(word
);
936 vfres
->nexactf
= FW_PFVF_CMD_NEXACTF_G(word
);
938 word
= be32_to_cpu(rpl
.r_caps_to_nethctrl
);
939 vfres
->r_caps
= FW_PFVF_CMD_R_CAPS_G(word
);
940 vfres
->wx_caps
= FW_PFVF_CMD_WX_CAPS_G(word
);
941 vfres
->nethctrl
= FW_PFVF_CMD_NETHCTRL_G(word
);
947 * t4vf_read_rss_vi_config - read a VI's RSS configuration
948 * @adapter: the adapter
949 * @viid: Virtual Interface ID
950 * @config: pointer to host-native VI RSS Configuration buffer
952 * Reads the Virtual Interface's RSS configuration information and
953 * translates it into CPU-native format.
955 int t4vf_read_rss_vi_config(struct adapter
*adapter
, unsigned int viid
,
956 union rss_vi_config
*config
)
958 struct fw_rss_vi_config_cmd cmd
, rpl
;
961 memset(&cmd
, 0, sizeof(cmd
));
962 cmd
.op_to_viid
= cpu_to_be32(FW_CMD_OP_V(FW_RSS_VI_CONFIG_CMD
) |
965 FW_RSS_VI_CONFIG_CMD_VIID(viid
));
966 cmd
.retval_len16
= cpu_to_be32(FW_LEN16(cmd
));
967 v
= t4vf_wr_mbox(adapter
, &cmd
, sizeof(cmd
), &rpl
);
971 switch (adapter
->params
.rss
.mode
) {
972 case FW_RSS_GLB_CONFIG_CMD_MODE_BASICVIRTUAL
: {
973 u32 word
= be32_to_cpu(rpl
.u
.basicvirtual
.defaultq_to_udpen
);
975 config
->basicvirtual
.ip6fourtupen
=
976 ((word
& FW_RSS_VI_CONFIG_CMD_IP6FOURTUPEN_F
) != 0);
977 config
->basicvirtual
.ip6twotupen
=
978 ((word
& FW_RSS_VI_CONFIG_CMD_IP6TWOTUPEN_F
) != 0);
979 config
->basicvirtual
.ip4fourtupen
=
980 ((word
& FW_RSS_VI_CONFIG_CMD_IP4FOURTUPEN_F
) != 0);
981 config
->basicvirtual
.ip4twotupen
=
982 ((word
& FW_RSS_VI_CONFIG_CMD_IP4TWOTUPEN_F
) != 0);
983 config
->basicvirtual
.udpen
=
984 ((word
& FW_RSS_VI_CONFIG_CMD_UDPEN_F
) != 0);
985 config
->basicvirtual
.defaultq
=
986 FW_RSS_VI_CONFIG_CMD_DEFAULTQ_G(word
);
998 * t4vf_write_rss_vi_config - write a VI's RSS configuration
999 * @adapter: the adapter
1000 * @viid: Virtual Interface ID
1001 * @config: pointer to host-native VI RSS Configuration buffer
1003 * Write the Virtual Interface's RSS configuration information
1004 * (translating it into firmware-native format before writing).
1006 int t4vf_write_rss_vi_config(struct adapter
*adapter
, unsigned int viid
,
1007 union rss_vi_config
*config
)
1009 struct fw_rss_vi_config_cmd cmd
, rpl
;
1011 memset(&cmd
, 0, sizeof(cmd
));
1012 cmd
.op_to_viid
= cpu_to_be32(FW_CMD_OP_V(FW_RSS_VI_CONFIG_CMD
) |
1015 FW_RSS_VI_CONFIG_CMD_VIID(viid
));
1016 cmd
.retval_len16
= cpu_to_be32(FW_LEN16(cmd
));
1017 switch (adapter
->params
.rss
.mode
) {
1018 case FW_RSS_GLB_CONFIG_CMD_MODE_BASICVIRTUAL
: {
1021 if (config
->basicvirtual
.ip6fourtupen
)
1022 word
|= FW_RSS_VI_CONFIG_CMD_IP6FOURTUPEN_F
;
1023 if (config
->basicvirtual
.ip6twotupen
)
1024 word
|= FW_RSS_VI_CONFIG_CMD_IP6TWOTUPEN_F
;
1025 if (config
->basicvirtual
.ip4fourtupen
)
1026 word
|= FW_RSS_VI_CONFIG_CMD_IP4FOURTUPEN_F
;
1027 if (config
->basicvirtual
.ip4twotupen
)
1028 word
|= FW_RSS_VI_CONFIG_CMD_IP4TWOTUPEN_F
;
1029 if (config
->basicvirtual
.udpen
)
1030 word
|= FW_RSS_VI_CONFIG_CMD_UDPEN_F
;
1031 word
|= FW_RSS_VI_CONFIG_CMD_DEFAULTQ_V(
1032 config
->basicvirtual
.defaultq
);
1033 cmd
.u
.basicvirtual
.defaultq_to_udpen
= cpu_to_be32(word
);
1041 return t4vf_wr_mbox(adapter
, &cmd
, sizeof(cmd
), &rpl
);
1045 * t4vf_config_rss_range - configure a portion of the RSS mapping table
1046 * @adapter: the adapter
1047 * @viid: Virtual Interface of RSS Table Slice
1048 * @start: starting entry in the table to write
1049 * @n: how many table entries to write
1050 * @rspq: values for the "Response Queue" (Ingress Queue) lookup table
1051 * @nrspq: number of values in @rspq
1053 * Programs the selected part of the VI's RSS mapping table with the
1054 * provided values. If @nrspq < @n the supplied values are used repeatedly
1055 * until the full table range is populated.
1057 * The caller must ensure the values in @rspq are in the range 0..1023.
1059 int t4vf_config_rss_range(struct adapter
*adapter
, unsigned int viid
,
1060 int start
, int n
, const u16
*rspq
, int nrspq
)
1062 const u16
*rsp
= rspq
;
1063 const u16
*rsp_end
= rspq
+nrspq
;
1064 struct fw_rss_ind_tbl_cmd cmd
;
1067 * Initialize firmware command template to write the RSS table.
1069 memset(&cmd
, 0, sizeof(cmd
));
1070 cmd
.op_to_viid
= cpu_to_be32(FW_CMD_OP_V(FW_RSS_IND_TBL_CMD
) |
1073 FW_RSS_IND_TBL_CMD_VIID_V(viid
));
1074 cmd
.retval_len16
= cpu_to_be32(FW_LEN16(cmd
));
1077 * Each firmware RSS command can accommodate up to 32 RSS Ingress
1078 * Queue Identifiers. These Ingress Queue IDs are packed three to
1079 * a 32-bit word as 10-bit values with the upper remaining 2 bits
1083 __be32
*qp
= &cmd
.iq0_to_iq2
;
1084 int nq
= min(n
, 32);
1088 * Set up the firmware RSS command header to send the next
1089 * "nq" Ingress Queue IDs to the firmware.
1091 cmd
.niqid
= cpu_to_be16(nq
);
1092 cmd
.startidx
= cpu_to_be16(start
);
1095 * "nq" more done for the start of the next loop.
1101 * While there are still Ingress Queue IDs to stuff into the
1102 * current firmware RSS command, retrieve them from the
1103 * Ingress Queue ID array and insert them into the command.
1107 * Grab up to the next 3 Ingress Queue IDs (wrapping
1108 * around the Ingress Queue ID array if necessary) and
1109 * insert them into the firmware RSS command at the
1110 * current 3-tuple position within the commad.
1114 int nqbuf
= min(3, nq
);
1117 qbuf
[0] = qbuf
[1] = qbuf
[2] = 0;
1124 *qp
++ = cpu_to_be32(FW_RSS_IND_TBL_CMD_IQ0_V(qbuf
[0]) |
1125 FW_RSS_IND_TBL_CMD_IQ1_V(qbuf
[1]) |
1126 FW_RSS_IND_TBL_CMD_IQ2_V(qbuf
[2]));
1130 * Send this portion of the RRS table update to the firmware;
1131 * bail out on any errors.
1133 ret
= t4vf_wr_mbox(adapter
, &cmd
, sizeof(cmd
), NULL
);
1141 * t4vf_alloc_vi - allocate a virtual interface on a port
1142 * @adapter: the adapter
1143 * @port_id: physical port associated with the VI
1145 * Allocate a new Virtual Interface and bind it to the indicated
1146 * physical port. Return the new Virtual Interface Identifier on
1147 * success, or a [negative] error number on failure.
1149 int t4vf_alloc_vi(struct adapter
*adapter
, int port_id
)
1151 struct fw_vi_cmd cmd
, rpl
;
1155 * Execute a VI command to allocate Virtual Interface and return its
1158 memset(&cmd
, 0, sizeof(cmd
));
1159 cmd
.op_to_vfn
= cpu_to_be32(FW_CMD_OP_V(FW_VI_CMD
) |
1163 cmd
.alloc_to_len16
= cpu_to_be32(FW_LEN16(cmd
) |
1165 cmd
.portid_pkd
= FW_VI_CMD_PORTID_V(port_id
);
1166 v
= t4vf_wr_mbox(adapter
, &cmd
, sizeof(cmd
), &rpl
);
1170 return FW_VI_CMD_VIID_G(be16_to_cpu(rpl
.type_viid
));
1174 * t4vf_free_vi -- free a virtual interface
1175 * @adapter: the adapter
1176 * @viid: the virtual interface identifier
1178 * Free a previously allocated Virtual Interface. Return an error on
1181 int t4vf_free_vi(struct adapter
*adapter
, int viid
)
1183 struct fw_vi_cmd cmd
;
1186 * Execute a VI command to free the Virtual Interface.
1188 memset(&cmd
, 0, sizeof(cmd
));
1189 cmd
.op_to_vfn
= cpu_to_be32(FW_CMD_OP_V(FW_VI_CMD
) |
1192 cmd
.alloc_to_len16
= cpu_to_be32(FW_LEN16(cmd
) |
1194 cmd
.type_viid
= cpu_to_be16(FW_VI_CMD_VIID_V(viid
));
1195 return t4vf_wr_mbox(adapter
, &cmd
, sizeof(cmd
), NULL
);
1199 * t4vf_enable_vi - enable/disable a virtual interface
1200 * @adapter: the adapter
1201 * @viid: the Virtual Interface ID
1202 * @rx_en: 1=enable Rx, 0=disable Rx
1203 * @tx_en: 1=enable Tx, 0=disable Tx
1205 * Enables/disables a virtual interface.
1207 int t4vf_enable_vi(struct adapter
*adapter
, unsigned int viid
,
1208 bool rx_en
, bool tx_en
)
1210 struct fw_vi_enable_cmd cmd
;
1212 memset(&cmd
, 0, sizeof(cmd
));
1213 cmd
.op_to_viid
= cpu_to_be32(FW_CMD_OP_V(FW_VI_ENABLE_CMD
) |
1216 FW_VI_ENABLE_CMD_VIID_V(viid
));
1217 cmd
.ien_to_len16
= cpu_to_be32(FW_VI_ENABLE_CMD_IEN_V(rx_en
) |
1218 FW_VI_ENABLE_CMD_EEN_V(tx_en
) |
1220 return t4vf_wr_mbox(adapter
, &cmd
, sizeof(cmd
), NULL
);
1224 * t4vf_identify_port - identify a VI's port by blinking its LED
1225 * @adapter: the adapter
1226 * @viid: the Virtual Interface ID
1227 * @nblinks: how many times to blink LED at 2.5 Hz
1229 * Identifies a VI's port by blinking its LED.
1231 int t4vf_identify_port(struct adapter
*adapter
, unsigned int viid
,
1232 unsigned int nblinks
)
1234 struct fw_vi_enable_cmd cmd
;
1236 memset(&cmd
, 0, sizeof(cmd
));
1237 cmd
.op_to_viid
= cpu_to_be32(FW_CMD_OP_V(FW_VI_ENABLE_CMD
) |
1240 FW_VI_ENABLE_CMD_VIID_V(viid
));
1241 cmd
.ien_to_len16
= cpu_to_be32(FW_VI_ENABLE_CMD_LED_F
|
1243 cmd
.blinkdur
= cpu_to_be16(nblinks
);
1244 return t4vf_wr_mbox(adapter
, &cmd
, sizeof(cmd
), NULL
);
1248 * t4vf_set_rxmode - set Rx properties of a virtual interface
1249 * @adapter: the adapter
1251 * @mtu: the new MTU or -1 for no change
1252 * @promisc: 1 to enable promiscuous mode, 0 to disable it, -1 no change
1253 * @all_multi: 1 to enable all-multi mode, 0 to disable it, -1 no change
1254 * @bcast: 1 to enable broadcast Rx, 0 to disable it, -1 no change
1255 * @vlanex: 1 to enable hardware VLAN Tag extraction, 0 to disable it,
1258 * Sets Rx properties of a virtual interface.
1260 int t4vf_set_rxmode(struct adapter
*adapter
, unsigned int viid
,
1261 int mtu
, int promisc
, int all_multi
, int bcast
, int vlanex
,
1264 struct fw_vi_rxmode_cmd cmd
;
1266 /* convert to FW values */
1268 mtu
= FW_VI_RXMODE_CMD_MTU_M
;
1270 promisc
= FW_VI_RXMODE_CMD_PROMISCEN_M
;
1272 all_multi
= FW_VI_RXMODE_CMD_ALLMULTIEN_M
;
1274 bcast
= FW_VI_RXMODE_CMD_BROADCASTEN_M
;
1276 vlanex
= FW_VI_RXMODE_CMD_VLANEXEN_M
;
1278 memset(&cmd
, 0, sizeof(cmd
));
1279 cmd
.op_to_viid
= cpu_to_be32(FW_CMD_OP_V(FW_VI_RXMODE_CMD
) |
1282 FW_VI_RXMODE_CMD_VIID_V(viid
));
1283 cmd
.retval_len16
= cpu_to_be32(FW_LEN16(cmd
));
1284 cmd
.mtu_to_vlanexen
=
1285 cpu_to_be32(FW_VI_RXMODE_CMD_MTU_V(mtu
) |
1286 FW_VI_RXMODE_CMD_PROMISCEN_V(promisc
) |
1287 FW_VI_RXMODE_CMD_ALLMULTIEN_V(all_multi
) |
1288 FW_VI_RXMODE_CMD_BROADCASTEN_V(bcast
) |
1289 FW_VI_RXMODE_CMD_VLANEXEN_V(vlanex
));
1290 return t4vf_wr_mbox_core(adapter
, &cmd
, sizeof(cmd
), NULL
, sleep_ok
);
1294 * t4vf_alloc_mac_filt - allocates exact-match filters for MAC addresses
1295 * @adapter: the adapter
1296 * @viid: the Virtual Interface Identifier
1297 * @free: if true any existing filters for this VI id are first removed
1298 * @naddr: the number of MAC addresses to allocate filters for (up to 7)
1299 * @addr: the MAC address(es)
1300 * @idx: where to store the index of each allocated filter
1301 * @hash: pointer to hash address filter bitmap
1302 * @sleep_ok: call is allowed to sleep
1304 * Allocates an exact-match filter for each of the supplied addresses and
1305 * sets it to the corresponding address. If @idx is not %NULL it should
1306 * have at least @naddr entries, each of which will be set to the index of
1307 * the filter allocated for the corresponding MAC address. If a filter
1308 * could not be allocated for an address its index is set to 0xffff.
1309 * If @hash is not %NULL addresses that fail to allocate an exact filter
1310 * are hashed and update the hash filter bitmap pointed at by @hash.
1312 * Returns a negative error number or the number of filters allocated.
1314 int t4vf_alloc_mac_filt(struct adapter
*adapter
, unsigned int viid
, bool free
,
1315 unsigned int naddr
, const u8
**addr
, u16
*idx
,
1316 u64
*hash
, bool sleep_ok
)
1318 int offset
, ret
= 0;
1319 unsigned nfilters
= 0;
1320 unsigned int rem
= naddr
;
1321 struct fw_vi_mac_cmd cmd
, rpl
;
1322 unsigned int max_naddr
= adapter
->params
.arch
.mps_tcam_size
;
1324 if (naddr
> max_naddr
)
1327 for (offset
= 0; offset
< naddr
; /**/) {
1328 unsigned int fw_naddr
= (rem
< ARRAY_SIZE(cmd
.u
.exact
)
1330 : ARRAY_SIZE(cmd
.u
.exact
));
1331 size_t len16
= DIV_ROUND_UP(offsetof(struct fw_vi_mac_cmd
,
1332 u
.exact
[fw_naddr
]), 16);
1333 struct fw_vi_mac_exact
*p
;
1336 memset(&cmd
, 0, sizeof(cmd
));
1337 cmd
.op_to_viid
= cpu_to_be32(FW_CMD_OP_V(FW_VI_MAC_CMD
) |
1340 (free
? FW_CMD_EXEC_F
: 0) |
1341 FW_VI_MAC_CMD_VIID_V(viid
));
1342 cmd
.freemacs_to_len16
=
1343 cpu_to_be32(FW_VI_MAC_CMD_FREEMACS_V(free
) |
1344 FW_CMD_LEN16_V(len16
));
1346 for (i
= 0, p
= cmd
.u
.exact
; i
< fw_naddr
; i
++, p
++) {
1347 p
->valid_to_idx
= cpu_to_be16(
1348 FW_VI_MAC_CMD_VALID_F
|
1349 FW_VI_MAC_CMD_IDX_V(FW_VI_MAC_ADD_MAC
));
1350 memcpy(p
->macaddr
, addr
[offset
+i
], sizeof(p
->macaddr
));
1354 ret
= t4vf_wr_mbox_core(adapter
, &cmd
, sizeof(cmd
), &rpl
,
1356 if (ret
&& ret
!= -ENOMEM
)
1359 for (i
= 0, p
= rpl
.u
.exact
; i
< fw_naddr
; i
++, p
++) {
1360 u16 index
= FW_VI_MAC_CMD_IDX_G(
1361 be16_to_cpu(p
->valid_to_idx
));
1368 if (index
< max_naddr
)
1371 *hash
|= (1ULL << hash_mac_addr(addr
[offset
+i
]));
1380 * If there were no errors or we merely ran out of room in our MAC
1381 * address arena, return the number of filters actually written.
1383 if (ret
== 0 || ret
== -ENOMEM
)
1389 * t4vf_free_mac_filt - frees exact-match filters of given MAC addresses
1390 * @adapter: the adapter
1392 * @naddr: the number of MAC addresses to allocate filters for (up to 7)
1393 * @addr: the MAC address(es)
1394 * @sleep_ok: call is allowed to sleep
1396 * Frees the exact-match filter for each of the supplied addresses
1398 * Returns a negative error number or the number of filters freed.
1400 int t4vf_free_mac_filt(struct adapter
*adapter
, unsigned int viid
,
1401 unsigned int naddr
, const u8
**addr
, bool sleep_ok
)
1403 int offset
, ret
= 0;
1404 struct fw_vi_mac_cmd cmd
;
1405 unsigned int nfilters
= 0;
1406 unsigned int max_naddr
= adapter
->params
.arch
.mps_tcam_size
;
1407 unsigned int rem
= naddr
;
1409 if (naddr
> max_naddr
)
1412 for (offset
= 0; offset
< (int)naddr
; /**/) {
1413 unsigned int fw_naddr
= (rem
< ARRAY_SIZE(cmd
.u
.exact
) ?
1414 rem
: ARRAY_SIZE(cmd
.u
.exact
));
1415 size_t len16
= DIV_ROUND_UP(offsetof(struct fw_vi_mac_cmd
,
1416 u
.exact
[fw_naddr
]), 16);
1417 struct fw_vi_mac_exact
*p
;
1420 memset(&cmd
, 0, sizeof(cmd
));
1421 cmd
.op_to_viid
= cpu_to_be32(FW_CMD_OP_V(FW_VI_MAC_CMD
) |
1425 FW_VI_MAC_CMD_VIID_V(viid
));
1426 cmd
.freemacs_to_len16
=
1427 cpu_to_be32(FW_VI_MAC_CMD_FREEMACS_V(0) |
1428 FW_CMD_LEN16_V(len16
));
1430 for (i
= 0, p
= cmd
.u
.exact
; i
< (int)fw_naddr
; i
++, p
++) {
1431 p
->valid_to_idx
= cpu_to_be16(
1432 FW_VI_MAC_CMD_VALID_F
|
1433 FW_VI_MAC_CMD_IDX_V(FW_VI_MAC_MAC_BASED_FREE
));
1434 memcpy(p
->macaddr
, addr
[offset
+i
], sizeof(p
->macaddr
));
1437 ret
= t4vf_wr_mbox_core(adapter
, &cmd
, sizeof(cmd
), &cmd
,
1442 for (i
= 0, p
= cmd
.u
.exact
; i
< fw_naddr
; i
++, p
++) {
1443 u16 index
= FW_VI_MAC_CMD_IDX_G(
1444 be16_to_cpu(p
->valid_to_idx
));
1446 if (index
< max_naddr
)
1460 * t4vf_change_mac - modifies the exact-match filter for a MAC address
1461 * @adapter: the adapter
1462 * @viid: the Virtual Interface ID
1463 * @idx: index of existing filter for old value of MAC address, or -1
1464 * @addr: the new MAC address value
1465 * @persist: if idx < 0, the new MAC allocation should be persistent
1467 * Modifies an exact-match filter and sets it to the new MAC address.
1468 * Note that in general it is not possible to modify the value of a given
1469 * filter so the generic way to modify an address filter is to free the
1470 * one being used by the old address value and allocate a new filter for
1471 * the new address value. @idx can be -1 if the address is a new
1474 * Returns a negative error number or the index of the filter with the new
1477 int t4vf_change_mac(struct adapter
*adapter
, unsigned int viid
,
1478 int idx
, const u8
*addr
, bool persist
)
1481 struct fw_vi_mac_cmd cmd
, rpl
;
1482 struct fw_vi_mac_exact
*p
= &cmd
.u
.exact
[0];
1483 size_t len16
= DIV_ROUND_UP(offsetof(struct fw_vi_mac_cmd
,
1485 unsigned int max_mac_addr
= adapter
->params
.arch
.mps_tcam_size
;
1488 * If this is a new allocation, determine whether it should be
1489 * persistent (across a "freemacs" operation) or not.
1492 idx
= persist
? FW_VI_MAC_ADD_PERSIST_MAC
: FW_VI_MAC_ADD_MAC
;
1494 memset(&cmd
, 0, sizeof(cmd
));
1495 cmd
.op_to_viid
= cpu_to_be32(FW_CMD_OP_V(FW_VI_MAC_CMD
) |
1498 FW_VI_MAC_CMD_VIID_V(viid
));
1499 cmd
.freemacs_to_len16
= cpu_to_be32(FW_CMD_LEN16_V(len16
));
1500 p
->valid_to_idx
= cpu_to_be16(FW_VI_MAC_CMD_VALID_F
|
1501 FW_VI_MAC_CMD_IDX_V(idx
));
1502 memcpy(p
->macaddr
, addr
, sizeof(p
->macaddr
));
1504 ret
= t4vf_wr_mbox(adapter
, &cmd
, sizeof(cmd
), &rpl
);
1506 p
= &rpl
.u
.exact
[0];
1507 ret
= FW_VI_MAC_CMD_IDX_G(be16_to_cpu(p
->valid_to_idx
));
1508 if (ret
>= max_mac_addr
)
1515 * t4vf_set_addr_hash - program the MAC inexact-match hash filter
1516 * @adapter: the adapter
1517 * @viid: the Virtual Interface Identifier
1518 * @ucast: whether the hash filter should also match unicast addresses
1519 * @vec: the value to be written to the hash filter
1520 * @sleep_ok: call is allowed to sleep
1522 * Sets the 64-bit inexact-match hash filter for a virtual interface.
1524 int t4vf_set_addr_hash(struct adapter
*adapter
, unsigned int viid
,
1525 bool ucast
, u64 vec
, bool sleep_ok
)
1527 struct fw_vi_mac_cmd cmd
;
1528 size_t len16
= DIV_ROUND_UP(offsetof(struct fw_vi_mac_cmd
,
1531 memset(&cmd
, 0, sizeof(cmd
));
1532 cmd
.op_to_viid
= cpu_to_be32(FW_CMD_OP_V(FW_VI_MAC_CMD
) |
1535 FW_VI_ENABLE_CMD_VIID_V(viid
));
1536 cmd
.freemacs_to_len16
= cpu_to_be32(FW_VI_MAC_CMD_HASHVECEN_F
|
1537 FW_VI_MAC_CMD_HASHUNIEN_V(ucast
) |
1538 FW_CMD_LEN16_V(len16
));
1539 cmd
.u
.hash
.hashvec
= cpu_to_be64(vec
);
1540 return t4vf_wr_mbox_core(adapter
, &cmd
, sizeof(cmd
), NULL
, sleep_ok
);
1544 * t4vf_get_port_stats - collect "port" statistics
1545 * @adapter: the adapter
1546 * @pidx: the port index
1547 * @s: the stats structure to fill
1549 * Collect statistics for the "port"'s Virtual Interface.
1551 int t4vf_get_port_stats(struct adapter
*adapter
, int pidx
,
1552 struct t4vf_port_stats
*s
)
1554 struct port_info
*pi
= adap2pinfo(adapter
, pidx
);
1555 struct fw_vi_stats_vf fwstats
;
1556 unsigned int rem
= VI_VF_NUM_STATS
;
1557 __be64
*fwsp
= (__be64
*)&fwstats
;
1560 * Grab the Virtual Interface statistics a chunk at a time via mailbox
1561 * commands. We could use a Work Request and get all of them at once
1562 * but that's an asynchronous interface which is awkward to use.
1565 unsigned int ix
= VI_VF_NUM_STATS
- rem
;
1566 unsigned int nstats
= min(6U, rem
);
1567 struct fw_vi_stats_cmd cmd
, rpl
;
1568 size_t len
= (offsetof(struct fw_vi_stats_cmd
, u
) +
1569 sizeof(struct fw_vi_stats_ctl
));
1570 size_t len16
= DIV_ROUND_UP(len
, 16);
1573 memset(&cmd
, 0, sizeof(cmd
));
1574 cmd
.op_to_viid
= cpu_to_be32(FW_CMD_OP_V(FW_VI_STATS_CMD
) |
1575 FW_VI_STATS_CMD_VIID_V(pi
->viid
) |
1578 cmd
.retval_len16
= cpu_to_be32(FW_CMD_LEN16_V(len16
));
1579 cmd
.u
.ctl
.nstats_ix
=
1580 cpu_to_be16(FW_VI_STATS_CMD_IX_V(ix
) |
1581 FW_VI_STATS_CMD_NSTATS_V(nstats
));
1582 ret
= t4vf_wr_mbox_ns(adapter
, &cmd
, len
, &rpl
);
1586 memcpy(fwsp
, &rpl
.u
.ctl
.stat0
, sizeof(__be64
) * nstats
);
1593 * Translate firmware statistics into host native statistics.
1595 s
->tx_bcast_bytes
= be64_to_cpu(fwstats
.tx_bcast_bytes
);
1596 s
->tx_bcast_frames
= be64_to_cpu(fwstats
.tx_bcast_frames
);
1597 s
->tx_mcast_bytes
= be64_to_cpu(fwstats
.tx_mcast_bytes
);
1598 s
->tx_mcast_frames
= be64_to_cpu(fwstats
.tx_mcast_frames
);
1599 s
->tx_ucast_bytes
= be64_to_cpu(fwstats
.tx_ucast_bytes
);
1600 s
->tx_ucast_frames
= be64_to_cpu(fwstats
.tx_ucast_frames
);
1601 s
->tx_drop_frames
= be64_to_cpu(fwstats
.tx_drop_frames
);
1602 s
->tx_offload_bytes
= be64_to_cpu(fwstats
.tx_offload_bytes
);
1603 s
->tx_offload_frames
= be64_to_cpu(fwstats
.tx_offload_frames
);
1605 s
->rx_bcast_bytes
= be64_to_cpu(fwstats
.rx_bcast_bytes
);
1606 s
->rx_bcast_frames
= be64_to_cpu(fwstats
.rx_bcast_frames
);
1607 s
->rx_mcast_bytes
= be64_to_cpu(fwstats
.rx_mcast_bytes
);
1608 s
->rx_mcast_frames
= be64_to_cpu(fwstats
.rx_mcast_frames
);
1609 s
->rx_ucast_bytes
= be64_to_cpu(fwstats
.rx_ucast_bytes
);
1610 s
->rx_ucast_frames
= be64_to_cpu(fwstats
.rx_ucast_frames
);
1612 s
->rx_err_frames
= be64_to_cpu(fwstats
.rx_err_frames
);
1618 * t4vf_iq_free - free an ingress queue and its free lists
1619 * @adapter: the adapter
1620 * @iqtype: the ingress queue type (FW_IQ_TYPE_FL_INT_CAP, etc.)
1621 * @iqid: ingress queue ID
1622 * @fl0id: FL0 queue ID or 0xffff if no attached FL0
1623 * @fl1id: FL1 queue ID or 0xffff if no attached FL1
1625 * Frees an ingress queue and its associated free lists, if any.
1627 int t4vf_iq_free(struct adapter
*adapter
, unsigned int iqtype
,
1628 unsigned int iqid
, unsigned int fl0id
, unsigned int fl1id
)
1630 struct fw_iq_cmd cmd
;
1632 memset(&cmd
, 0, sizeof(cmd
));
1633 cmd
.op_to_vfn
= cpu_to_be32(FW_CMD_OP_V(FW_IQ_CMD
) |
1636 cmd
.alloc_to_len16
= cpu_to_be32(FW_IQ_CMD_FREE_F
|
1638 cmd
.type_to_iqandstindex
=
1639 cpu_to_be32(FW_IQ_CMD_TYPE_V(iqtype
));
1641 cmd
.iqid
= cpu_to_be16(iqid
);
1642 cmd
.fl0id
= cpu_to_be16(fl0id
);
1643 cmd
.fl1id
= cpu_to_be16(fl1id
);
1644 return t4vf_wr_mbox(adapter
, &cmd
, sizeof(cmd
), NULL
);
1648 * t4vf_eth_eq_free - free an Ethernet egress queue
1649 * @adapter: the adapter
1650 * @eqid: egress queue ID
1652 * Frees an Ethernet egress queue.
1654 int t4vf_eth_eq_free(struct adapter
*adapter
, unsigned int eqid
)
1656 struct fw_eq_eth_cmd cmd
;
1658 memset(&cmd
, 0, sizeof(cmd
));
1659 cmd
.op_to_vfn
= cpu_to_be32(FW_CMD_OP_V(FW_EQ_ETH_CMD
) |
1662 cmd
.alloc_to_len16
= cpu_to_be32(FW_EQ_ETH_CMD_FREE_F
|
1664 cmd
.eqid_pkd
= cpu_to_be32(FW_EQ_ETH_CMD_EQID_V(eqid
));
1665 return t4vf_wr_mbox(adapter
, &cmd
, sizeof(cmd
), NULL
);
1669 * t4vf_handle_fw_rpl - process a firmware reply message
1670 * @adapter: the adapter
1671 * @rpl: start of the firmware message
1673 * Processes a firmware message, such as link state change messages.
1675 int t4vf_handle_fw_rpl(struct adapter
*adapter
, const __be64
*rpl
)
1677 const struct fw_cmd_hdr
*cmd_hdr
= (const struct fw_cmd_hdr
*)rpl
;
1678 u8 opcode
= FW_CMD_OP_G(be32_to_cpu(cmd_hdr
->hi
));
1683 * Link/module state change message.
1685 const struct fw_port_cmd
*port_cmd
=
1686 (const struct fw_port_cmd
*)rpl
;
1688 int action
, port_id
, link_ok
, speed
, fc
, pidx
;
1691 * Extract various fields from port status change message.
1693 action
= FW_PORT_CMD_ACTION_G(
1694 be32_to_cpu(port_cmd
->action_to_len16
));
1695 if (action
!= FW_PORT_ACTION_GET_PORT_INFO
) {
1696 dev_err(adapter
->pdev_dev
,
1697 "Unknown firmware PORT reply action %x\n",
1702 port_id
= FW_PORT_CMD_PORTID_G(
1703 be32_to_cpu(port_cmd
->op_to_portid
));
1705 stat
= be32_to_cpu(port_cmd
->u
.info
.lstatus_to_modtype
);
1706 link_ok
= (stat
& FW_PORT_CMD_LSTATUS_F
) != 0;
1709 if (stat
& FW_PORT_CMD_RXPAUSE_F
)
1711 if (stat
& FW_PORT_CMD_TXPAUSE_F
)
1713 if (stat
& FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_100M
))
1715 else if (stat
& FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_1G
))
1717 else if (stat
& FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_10G
))
1719 else if (stat
& FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_40G
))
1723 * Scan all of our "ports" (Virtual Interfaces) looking for
1724 * those bound to the physical port which has changed. If
1725 * our recorded state doesn't match the current state,
1726 * signal that change to the OS code.
1728 for_each_port(adapter
, pidx
) {
1729 struct port_info
*pi
= adap2pinfo(adapter
, pidx
);
1730 struct link_config
*lc
;
1732 if (pi
->port_id
!= port_id
)
1737 mod
= FW_PORT_CMD_MODTYPE_G(stat
);
1738 if (mod
!= pi
->mod_type
) {
1740 t4vf_os_portmod_changed(adapter
, pidx
);
1743 if (link_ok
!= lc
->link_ok
|| speed
!= lc
->speed
||
1745 /* something changed */
1746 lc
->link_ok
= link_ok
;
1750 be16_to_cpu(port_cmd
->u
.info
.pcap
);
1751 lc
->lp_advertising
=
1752 be16_to_cpu(port_cmd
->u
.info
.lpacap
);
1753 t4vf_os_link_changed(adapter
, pidx
, link_ok
);
1760 dev_err(adapter
->pdev_dev
, "Unknown firmware reply %X\n",
1768 int t4vf_prep_adapter(struct adapter
*adapter
)
1771 unsigned int chipid
;
1773 /* Wait for the device to become ready before proceeding ...
1775 err
= t4vf_wait_dev_ready(adapter
);
1779 /* Default port and clock for debugging in case we can't reach
1782 adapter
->params
.nports
= 1;
1783 adapter
->params
.vfres
.pmask
= 1;
1784 adapter
->params
.vpd
.cclk
= 50000;
1786 adapter
->params
.chip
= 0;
1787 switch (CHELSIO_PCI_ID_VER(adapter
->pdev
->device
)) {
1789 adapter
->params
.chip
|= CHELSIO_CHIP_CODE(CHELSIO_T4
, 0);
1790 adapter
->params
.arch
.sge_fl_db
= DBPRIO_F
;
1791 adapter
->params
.arch
.mps_tcam_size
=
1792 NUM_MPS_CLS_SRAM_L_INSTANCES
;
1796 chipid
= REV_G(t4_read_reg(adapter
, PL_VF_REV_A
));
1797 adapter
->params
.chip
|= CHELSIO_CHIP_CODE(CHELSIO_T5
, chipid
);
1798 adapter
->params
.arch
.sge_fl_db
= DBPRIO_F
| DBTYPE_F
;
1799 adapter
->params
.arch
.mps_tcam_size
=
1800 NUM_MPS_T5_CLS_SRAM_L_INSTANCES
;
1804 chipid
= REV_G(t4_read_reg(adapter
, PL_VF_REV_A
));
1805 adapter
->params
.chip
|= CHELSIO_CHIP_CODE(CHELSIO_T6
, chipid
);
1806 adapter
->params
.arch
.sge_fl_db
= 0;
1807 adapter
->params
.arch
.mps_tcam_size
=
1808 NUM_MPS_T5_CLS_SRAM_L_INSTANCES
;
1816 * t4vf_get_vf_mac_acl - Get the MAC address to be set to
1817 * the VI of this VF.
1818 * @adapter: The adapter
1819 * @pf: The pf associated with vf
1820 * @naddr: the number of ACL MAC addresses returned in addr
1821 * @addr: Placeholder for MAC addresses
1823 * Find the MAC address to be set to the VF's VI. The requested MAC address
1824 * is from the host OS via callback in the PF driver.
1826 int t4vf_get_vf_mac_acl(struct adapter
*adapter
, unsigned int pf
,
1827 unsigned int *naddr
, u8
*addr
)
1829 struct fw_acl_mac_cmd cmd
;
1832 memset(&cmd
, 0, sizeof(cmd
));
1833 cmd
.op_to_vfn
= cpu_to_be32(FW_CMD_OP_V(FW_ACL_MAC_CMD
) |
1836 cmd
.en_to_len16
= cpu_to_be32((unsigned int)FW_LEN16(cmd
));
1837 ret
= t4vf_wr_mbox(adapter
, &cmd
, sizeof(cmd
), &cmd
);
1841 if (cmd
.nmac
< *naddr
)
1846 memcpy(addr
, cmd
.macaddr3
, sizeof(cmd
.macaddr3
));
1849 memcpy(addr
, cmd
.macaddr2
, sizeof(cmd
.macaddr2
));
1852 memcpy(addr
, cmd
.macaddr1
, sizeof(cmd
.macaddr1
));
1855 memcpy(addr
, cmd
.macaddr0
, sizeof(cmd
.macaddr0
));