2 * Copyright (C) 2005 - 2016 Broadcom
5 * This program is free software; you can redistribute it and/or
6 * modify it under the terms of the GNU General Public License version 2
7 * as published by the Free Software Foundation. The full GNU General
8 * Public License is included in this distribution in the file called COPYING.
10 * Contact Information:
11 * linux-drivers@emulex.com
15 * Costa Mesa, CA 92626
18 #include <linux/prefetch.h>
19 #include <linux/module.h>
22 #include <asm/div64.h>
23 #include <linux/aer.h>
24 #include <linux/if_bridge.h>
25 #include <net/busy_poll.h>
26 #include <net/vxlan.h>
28 MODULE_VERSION(DRV_VER
);
29 MODULE_DESCRIPTION(DRV_DESC
" " DRV_VER
);
30 MODULE_AUTHOR("Emulex Corporation");
31 MODULE_LICENSE("GPL");
33 /* num_vfs module param is obsolete.
34 * Use sysfs method to enable/disable VFs.
36 static unsigned int num_vfs
;
37 module_param(num_vfs
, uint
, S_IRUGO
);
38 MODULE_PARM_DESC(num_vfs
, "Number of PCI VFs to initialize");
40 static ushort rx_frag_size
= 2048;
41 module_param(rx_frag_size
, ushort
, S_IRUGO
);
42 MODULE_PARM_DESC(rx_frag_size
, "Size of a fragment that holds rcvd data.");
44 /* Per-module error detection/recovery workq shared across all functions.
45 * Each function schedules its own work request on this shared workq.
47 struct workqueue_struct
*be_err_recovery_workq
;
49 static const struct pci_device_id be_dev_ids
[] = {
50 { PCI_DEVICE(BE_VENDOR_ID
, BE_DEVICE_ID1
) },
51 { PCI_DEVICE(BE_VENDOR_ID
, BE_DEVICE_ID2
) },
52 { PCI_DEVICE(BE_VENDOR_ID
, OC_DEVICE_ID1
) },
53 { PCI_DEVICE(BE_VENDOR_ID
, OC_DEVICE_ID2
) },
54 { PCI_DEVICE(EMULEX_VENDOR_ID
, OC_DEVICE_ID3
)},
55 { PCI_DEVICE(EMULEX_VENDOR_ID
, OC_DEVICE_ID4
)},
56 { PCI_DEVICE(EMULEX_VENDOR_ID
, OC_DEVICE_ID5
)},
57 { PCI_DEVICE(EMULEX_VENDOR_ID
, OC_DEVICE_ID6
)},
60 MODULE_DEVICE_TABLE(pci
, be_dev_ids
);
62 /* Workqueue used by all functions for defering cmd calls to the adapter */
63 struct workqueue_struct
*be_wq
;
65 /* UE Status Low CSR */
66 static const char * const ue_status_low_desc
[] = {
101 /* UE Status High CSR */
102 static const char * const ue_status_hi_desc
[] = {
137 #define BE_VF_IF_EN_FLAGS (BE_IF_FLAGS_UNTAGGED | \
138 BE_IF_FLAGS_BROADCAST | \
139 BE_IF_FLAGS_MULTICAST | \
140 BE_IF_FLAGS_PASS_L3L4_ERRORS)
142 static void be_queue_free(struct be_adapter
*adapter
, struct be_queue_info
*q
)
144 struct be_dma_mem
*mem
= &q
->dma_mem
;
147 dma_free_coherent(&adapter
->pdev
->dev
, mem
->size
, mem
->va
,
153 static int be_queue_alloc(struct be_adapter
*adapter
, struct be_queue_info
*q
,
154 u16 len
, u16 entry_size
)
156 struct be_dma_mem
*mem
= &q
->dma_mem
;
158 memset(q
, 0, sizeof(*q
));
160 q
->entry_size
= entry_size
;
161 mem
->size
= len
* entry_size
;
162 mem
->va
= dma_zalloc_coherent(&adapter
->pdev
->dev
, mem
->size
, &mem
->dma
,
169 static void be_reg_intr_set(struct be_adapter
*adapter
, bool enable
)
173 pci_read_config_dword(adapter
->pdev
, PCICFG_MEMBAR_CTRL_INT_CTRL_OFFSET
,
175 enabled
= reg
& MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK
;
177 if (!enabled
&& enable
)
178 reg
|= MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK
;
179 else if (enabled
&& !enable
)
180 reg
&= ~MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK
;
184 pci_write_config_dword(adapter
->pdev
,
185 PCICFG_MEMBAR_CTRL_INT_CTRL_OFFSET
, reg
);
188 static void be_intr_set(struct be_adapter
*adapter
, bool enable
)
192 /* On lancer interrupts can't be controlled via this register */
193 if (lancer_chip(adapter
))
196 if (be_check_error(adapter
, BE_ERROR_EEH
))
199 status
= be_cmd_intr_set(adapter
, enable
);
201 be_reg_intr_set(adapter
, enable
);
204 static void be_rxq_notify(struct be_adapter
*adapter
, u16 qid
, u16 posted
)
208 if (be_check_error(adapter
, BE_ERROR_HW
))
211 val
|= qid
& DB_RQ_RING_ID_MASK
;
212 val
|= posted
<< DB_RQ_NUM_POSTED_SHIFT
;
215 iowrite32(val
, adapter
->db
+ DB_RQ_OFFSET
);
218 static void be_txq_notify(struct be_adapter
*adapter
, struct be_tx_obj
*txo
,
223 if (be_check_error(adapter
, BE_ERROR_HW
))
226 val
|= txo
->q
.id
& DB_TXULP_RING_ID_MASK
;
227 val
|= (posted
& DB_TXULP_NUM_POSTED_MASK
) << DB_TXULP_NUM_POSTED_SHIFT
;
230 iowrite32(val
, adapter
->db
+ txo
->db_offset
);
233 static void be_eq_notify(struct be_adapter
*adapter
, u16 qid
,
234 bool arm
, bool clear_int
, u16 num_popped
,
235 u32 eq_delay_mult_enc
)
239 val
|= qid
& DB_EQ_RING_ID_MASK
;
240 val
|= ((qid
& DB_EQ_RING_ID_EXT_MASK
) << DB_EQ_RING_ID_EXT_MASK_SHIFT
);
242 if (be_check_error(adapter
, BE_ERROR_HW
))
246 val
|= 1 << DB_EQ_REARM_SHIFT
;
248 val
|= 1 << DB_EQ_CLR_SHIFT
;
249 val
|= 1 << DB_EQ_EVNT_SHIFT
;
250 val
|= num_popped
<< DB_EQ_NUM_POPPED_SHIFT
;
251 val
|= eq_delay_mult_enc
<< DB_EQ_R2I_DLY_SHIFT
;
252 iowrite32(val
, adapter
->db
+ DB_EQ_OFFSET
);
255 void be_cq_notify(struct be_adapter
*adapter
, u16 qid
, bool arm
, u16 num_popped
)
259 val
|= qid
& DB_CQ_RING_ID_MASK
;
260 val
|= ((qid
& DB_CQ_RING_ID_EXT_MASK
) <<
261 DB_CQ_RING_ID_EXT_MASK_SHIFT
);
263 if (be_check_error(adapter
, BE_ERROR_HW
))
267 val
|= 1 << DB_CQ_REARM_SHIFT
;
268 val
|= num_popped
<< DB_CQ_NUM_POPPED_SHIFT
;
269 iowrite32(val
, adapter
->db
+ DB_CQ_OFFSET
);
272 static int be_mac_addr_set(struct net_device
*netdev
, void *p
)
274 struct be_adapter
*adapter
= netdev_priv(netdev
);
275 struct device
*dev
= &adapter
->pdev
->dev
;
276 struct sockaddr
*addr
= p
;
279 u32 old_pmac_id
= adapter
->pmac_id
[0], curr_pmac_id
= 0;
281 if (!is_valid_ether_addr(addr
->sa_data
))
282 return -EADDRNOTAVAIL
;
284 /* Proceed further only if, User provided MAC is different
287 if (ether_addr_equal(addr
->sa_data
, netdev
->dev_addr
))
290 /* if device is not running, copy MAC to netdev->dev_addr */
291 if (!netif_running(netdev
))
294 /* The PMAC_ADD cmd may fail if the VF doesn't have FILTMGMT
295 * privilege or if PF did not provision the new MAC address.
296 * On BE3, this cmd will always fail if the VF doesn't have the
297 * FILTMGMT privilege. This failure is OK, only if the PF programmed
298 * the MAC for the VF.
300 status
= be_cmd_pmac_add(adapter
, (u8
*)addr
->sa_data
,
301 adapter
->if_handle
, &adapter
->pmac_id
[0], 0);
303 curr_pmac_id
= adapter
->pmac_id
[0];
305 /* Delete the old programmed MAC. This call may fail if the
306 * old MAC was already deleted by the PF driver.
308 if (adapter
->pmac_id
[0] != old_pmac_id
)
309 be_cmd_pmac_del(adapter
, adapter
->if_handle
,
313 /* Decide if the new MAC is successfully activated only after
316 status
= be_cmd_get_active_mac(adapter
, curr_pmac_id
, mac
,
317 adapter
->if_handle
, true, 0);
321 /* The MAC change did not happen, either due to lack of privilege
322 * or PF didn't pre-provision.
324 if (!ether_addr_equal(addr
->sa_data
, mac
)) {
329 ether_addr_copy(netdev
->dev_addr
, addr
->sa_data
);
330 dev_info(dev
, "MAC address changed to %pM\n", addr
->sa_data
);
333 dev_warn(dev
, "MAC address change to %pM failed\n", addr
->sa_data
);
337 /* BE2 supports only v0 cmd */
338 static void *hw_stats_from_cmd(struct be_adapter
*adapter
)
340 if (BE2_chip(adapter
)) {
341 struct be_cmd_resp_get_stats_v0
*cmd
= adapter
->stats_cmd
.va
;
343 return &cmd
->hw_stats
;
344 } else if (BE3_chip(adapter
)) {
345 struct be_cmd_resp_get_stats_v1
*cmd
= adapter
->stats_cmd
.va
;
347 return &cmd
->hw_stats
;
349 struct be_cmd_resp_get_stats_v2
*cmd
= adapter
->stats_cmd
.va
;
351 return &cmd
->hw_stats
;
355 /* BE2 supports only v0 cmd */
356 static void *be_erx_stats_from_cmd(struct be_adapter
*adapter
)
358 if (BE2_chip(adapter
)) {
359 struct be_hw_stats_v0
*hw_stats
= hw_stats_from_cmd(adapter
);
361 return &hw_stats
->erx
;
362 } else if (BE3_chip(adapter
)) {
363 struct be_hw_stats_v1
*hw_stats
= hw_stats_from_cmd(adapter
);
365 return &hw_stats
->erx
;
367 struct be_hw_stats_v2
*hw_stats
= hw_stats_from_cmd(adapter
);
369 return &hw_stats
->erx
;
373 static void populate_be_v0_stats(struct be_adapter
*adapter
)
375 struct be_hw_stats_v0
*hw_stats
= hw_stats_from_cmd(adapter
);
376 struct be_pmem_stats
*pmem_sts
= &hw_stats
->pmem
;
377 struct be_rxf_stats_v0
*rxf_stats
= &hw_stats
->rxf
;
378 struct be_port_rxf_stats_v0
*port_stats
=
379 &rxf_stats
->port
[adapter
->port_num
];
380 struct be_drv_stats
*drvs
= &adapter
->drv_stats
;
382 be_dws_le_to_cpu(hw_stats
, sizeof(*hw_stats
));
383 drvs
->rx_pause_frames
= port_stats
->rx_pause_frames
;
384 drvs
->rx_crc_errors
= port_stats
->rx_crc_errors
;
385 drvs
->rx_control_frames
= port_stats
->rx_control_frames
;
386 drvs
->rx_in_range_errors
= port_stats
->rx_in_range_errors
;
387 drvs
->rx_frame_too_long
= port_stats
->rx_frame_too_long
;
388 drvs
->rx_dropped_runt
= port_stats
->rx_dropped_runt
;
389 drvs
->rx_ip_checksum_errs
= port_stats
->rx_ip_checksum_errs
;
390 drvs
->rx_tcp_checksum_errs
= port_stats
->rx_tcp_checksum_errs
;
391 drvs
->rx_udp_checksum_errs
= port_stats
->rx_udp_checksum_errs
;
392 drvs
->rxpp_fifo_overflow_drop
= port_stats
->rx_fifo_overflow
;
393 drvs
->rx_dropped_tcp_length
= port_stats
->rx_dropped_tcp_length
;
394 drvs
->rx_dropped_too_small
= port_stats
->rx_dropped_too_small
;
395 drvs
->rx_dropped_too_short
= port_stats
->rx_dropped_too_short
;
396 drvs
->rx_out_range_errors
= port_stats
->rx_out_range_errors
;
397 drvs
->rx_input_fifo_overflow_drop
= port_stats
->rx_input_fifo_overflow
;
398 drvs
->rx_dropped_header_too_small
=
399 port_stats
->rx_dropped_header_too_small
;
400 drvs
->rx_address_filtered
=
401 port_stats
->rx_address_filtered
+
402 port_stats
->rx_vlan_filtered
;
403 drvs
->rx_alignment_symbol_errors
=
404 port_stats
->rx_alignment_symbol_errors
;
406 drvs
->tx_pauseframes
= port_stats
->tx_pauseframes
;
407 drvs
->tx_controlframes
= port_stats
->tx_controlframes
;
409 if (adapter
->port_num
)
410 drvs
->jabber_events
= rxf_stats
->port1_jabber_events
;
412 drvs
->jabber_events
= rxf_stats
->port0_jabber_events
;
413 drvs
->rx_drops_no_pbuf
= rxf_stats
->rx_drops_no_pbuf
;
414 drvs
->rx_drops_no_erx_descr
= rxf_stats
->rx_drops_no_erx_descr
;
415 drvs
->forwarded_packets
= rxf_stats
->forwarded_packets
;
416 drvs
->rx_drops_mtu
= rxf_stats
->rx_drops_mtu
;
417 drvs
->rx_drops_no_tpre_descr
= rxf_stats
->rx_drops_no_tpre_descr
;
418 drvs
->rx_drops_too_many_frags
= rxf_stats
->rx_drops_too_many_frags
;
419 adapter
->drv_stats
.eth_red_drops
= pmem_sts
->eth_red_drops
;
422 static void populate_be_v1_stats(struct be_adapter
*adapter
)
424 struct be_hw_stats_v1
*hw_stats
= hw_stats_from_cmd(adapter
);
425 struct be_pmem_stats
*pmem_sts
= &hw_stats
->pmem
;
426 struct be_rxf_stats_v1
*rxf_stats
= &hw_stats
->rxf
;
427 struct be_port_rxf_stats_v1
*port_stats
=
428 &rxf_stats
->port
[adapter
->port_num
];
429 struct be_drv_stats
*drvs
= &adapter
->drv_stats
;
431 be_dws_le_to_cpu(hw_stats
, sizeof(*hw_stats
));
432 drvs
->pmem_fifo_overflow_drop
= port_stats
->pmem_fifo_overflow_drop
;
433 drvs
->rx_priority_pause_frames
= port_stats
->rx_priority_pause_frames
;
434 drvs
->rx_pause_frames
= port_stats
->rx_pause_frames
;
435 drvs
->rx_crc_errors
= port_stats
->rx_crc_errors
;
436 drvs
->rx_control_frames
= port_stats
->rx_control_frames
;
437 drvs
->rx_in_range_errors
= port_stats
->rx_in_range_errors
;
438 drvs
->rx_frame_too_long
= port_stats
->rx_frame_too_long
;
439 drvs
->rx_dropped_runt
= port_stats
->rx_dropped_runt
;
440 drvs
->rx_ip_checksum_errs
= port_stats
->rx_ip_checksum_errs
;
441 drvs
->rx_tcp_checksum_errs
= port_stats
->rx_tcp_checksum_errs
;
442 drvs
->rx_udp_checksum_errs
= port_stats
->rx_udp_checksum_errs
;
443 drvs
->rx_dropped_tcp_length
= port_stats
->rx_dropped_tcp_length
;
444 drvs
->rx_dropped_too_small
= port_stats
->rx_dropped_too_small
;
445 drvs
->rx_dropped_too_short
= port_stats
->rx_dropped_too_short
;
446 drvs
->rx_out_range_errors
= port_stats
->rx_out_range_errors
;
447 drvs
->rx_dropped_header_too_small
=
448 port_stats
->rx_dropped_header_too_small
;
449 drvs
->rx_input_fifo_overflow_drop
=
450 port_stats
->rx_input_fifo_overflow_drop
;
451 drvs
->rx_address_filtered
= port_stats
->rx_address_filtered
;
452 drvs
->rx_alignment_symbol_errors
=
453 port_stats
->rx_alignment_symbol_errors
;
454 drvs
->rxpp_fifo_overflow_drop
= port_stats
->rxpp_fifo_overflow_drop
;
455 drvs
->tx_pauseframes
= port_stats
->tx_pauseframes
;
456 drvs
->tx_controlframes
= port_stats
->tx_controlframes
;
457 drvs
->tx_priority_pauseframes
= port_stats
->tx_priority_pauseframes
;
458 drvs
->jabber_events
= port_stats
->jabber_events
;
459 drvs
->rx_drops_no_pbuf
= rxf_stats
->rx_drops_no_pbuf
;
460 drvs
->rx_drops_no_erx_descr
= rxf_stats
->rx_drops_no_erx_descr
;
461 drvs
->forwarded_packets
= rxf_stats
->forwarded_packets
;
462 drvs
->rx_drops_mtu
= rxf_stats
->rx_drops_mtu
;
463 drvs
->rx_drops_no_tpre_descr
= rxf_stats
->rx_drops_no_tpre_descr
;
464 drvs
->rx_drops_too_many_frags
= rxf_stats
->rx_drops_too_many_frags
;
465 adapter
->drv_stats
.eth_red_drops
= pmem_sts
->eth_red_drops
;
468 static void populate_be_v2_stats(struct be_adapter
*adapter
)
470 struct be_hw_stats_v2
*hw_stats
= hw_stats_from_cmd(adapter
);
471 struct be_pmem_stats
*pmem_sts
= &hw_stats
->pmem
;
472 struct be_rxf_stats_v2
*rxf_stats
= &hw_stats
->rxf
;
473 struct be_port_rxf_stats_v2
*port_stats
=
474 &rxf_stats
->port
[adapter
->port_num
];
475 struct be_drv_stats
*drvs
= &adapter
->drv_stats
;
477 be_dws_le_to_cpu(hw_stats
, sizeof(*hw_stats
));
478 drvs
->pmem_fifo_overflow_drop
= port_stats
->pmem_fifo_overflow_drop
;
479 drvs
->rx_priority_pause_frames
= port_stats
->rx_priority_pause_frames
;
480 drvs
->rx_pause_frames
= port_stats
->rx_pause_frames
;
481 drvs
->rx_crc_errors
= port_stats
->rx_crc_errors
;
482 drvs
->rx_control_frames
= port_stats
->rx_control_frames
;
483 drvs
->rx_in_range_errors
= port_stats
->rx_in_range_errors
;
484 drvs
->rx_frame_too_long
= port_stats
->rx_frame_too_long
;
485 drvs
->rx_dropped_runt
= port_stats
->rx_dropped_runt
;
486 drvs
->rx_ip_checksum_errs
= port_stats
->rx_ip_checksum_errs
;
487 drvs
->rx_tcp_checksum_errs
= port_stats
->rx_tcp_checksum_errs
;
488 drvs
->rx_udp_checksum_errs
= port_stats
->rx_udp_checksum_errs
;
489 drvs
->rx_dropped_tcp_length
= port_stats
->rx_dropped_tcp_length
;
490 drvs
->rx_dropped_too_small
= port_stats
->rx_dropped_too_small
;
491 drvs
->rx_dropped_too_short
= port_stats
->rx_dropped_too_short
;
492 drvs
->rx_out_range_errors
= port_stats
->rx_out_range_errors
;
493 drvs
->rx_dropped_header_too_small
=
494 port_stats
->rx_dropped_header_too_small
;
495 drvs
->rx_input_fifo_overflow_drop
=
496 port_stats
->rx_input_fifo_overflow_drop
;
497 drvs
->rx_address_filtered
= port_stats
->rx_address_filtered
;
498 drvs
->rx_alignment_symbol_errors
=
499 port_stats
->rx_alignment_symbol_errors
;
500 drvs
->rxpp_fifo_overflow_drop
= port_stats
->rxpp_fifo_overflow_drop
;
501 drvs
->tx_pauseframes
= port_stats
->tx_pauseframes
;
502 drvs
->tx_controlframes
= port_stats
->tx_controlframes
;
503 drvs
->tx_priority_pauseframes
= port_stats
->tx_priority_pauseframes
;
504 drvs
->jabber_events
= port_stats
->jabber_events
;
505 drvs
->rx_drops_no_pbuf
= rxf_stats
->rx_drops_no_pbuf
;
506 drvs
->rx_drops_no_erx_descr
= rxf_stats
->rx_drops_no_erx_descr
;
507 drvs
->forwarded_packets
= rxf_stats
->forwarded_packets
;
508 drvs
->rx_drops_mtu
= rxf_stats
->rx_drops_mtu
;
509 drvs
->rx_drops_no_tpre_descr
= rxf_stats
->rx_drops_no_tpre_descr
;
510 drvs
->rx_drops_too_many_frags
= rxf_stats
->rx_drops_too_many_frags
;
511 adapter
->drv_stats
.eth_red_drops
= pmem_sts
->eth_red_drops
;
512 if (be_roce_supported(adapter
)) {
513 drvs
->rx_roce_bytes_lsd
= port_stats
->roce_bytes_received_lsd
;
514 drvs
->rx_roce_bytes_msd
= port_stats
->roce_bytes_received_msd
;
515 drvs
->rx_roce_frames
= port_stats
->roce_frames_received
;
516 drvs
->roce_drops_crc
= port_stats
->roce_drops_crc
;
517 drvs
->roce_drops_payload_len
=
518 port_stats
->roce_drops_payload_len
;
522 static void populate_lancer_stats(struct be_adapter
*adapter
)
524 struct be_drv_stats
*drvs
= &adapter
->drv_stats
;
525 struct lancer_pport_stats
*pport_stats
= pport_stats_from_cmd(adapter
);
527 be_dws_le_to_cpu(pport_stats
, sizeof(*pport_stats
));
528 drvs
->rx_pause_frames
= pport_stats
->rx_pause_frames_lo
;
529 drvs
->rx_crc_errors
= pport_stats
->rx_crc_errors_lo
;
530 drvs
->rx_control_frames
= pport_stats
->rx_control_frames_lo
;
531 drvs
->rx_in_range_errors
= pport_stats
->rx_in_range_errors
;
532 drvs
->rx_frame_too_long
= pport_stats
->rx_frames_too_long_lo
;
533 drvs
->rx_dropped_runt
= pport_stats
->rx_dropped_runt
;
534 drvs
->rx_ip_checksum_errs
= pport_stats
->rx_ip_checksum_errors
;
535 drvs
->rx_tcp_checksum_errs
= pport_stats
->rx_tcp_checksum_errors
;
536 drvs
->rx_udp_checksum_errs
= pport_stats
->rx_udp_checksum_errors
;
537 drvs
->rx_dropped_tcp_length
=
538 pport_stats
->rx_dropped_invalid_tcp_length
;
539 drvs
->rx_dropped_too_small
= pport_stats
->rx_dropped_too_small
;
540 drvs
->rx_dropped_too_short
= pport_stats
->rx_dropped_too_short
;
541 drvs
->rx_out_range_errors
= pport_stats
->rx_out_of_range_errors
;
542 drvs
->rx_dropped_header_too_small
=
543 pport_stats
->rx_dropped_header_too_small
;
544 drvs
->rx_input_fifo_overflow_drop
= pport_stats
->rx_fifo_overflow
;
545 drvs
->rx_address_filtered
=
546 pport_stats
->rx_address_filtered
+
547 pport_stats
->rx_vlan_filtered
;
548 drvs
->rx_alignment_symbol_errors
= pport_stats
->rx_symbol_errors_lo
;
549 drvs
->rxpp_fifo_overflow_drop
= pport_stats
->rx_fifo_overflow
;
550 drvs
->tx_pauseframes
= pport_stats
->tx_pause_frames_lo
;
551 drvs
->tx_controlframes
= pport_stats
->tx_control_frames_lo
;
552 drvs
->jabber_events
= pport_stats
->rx_jabbers
;
553 drvs
->forwarded_packets
= pport_stats
->num_forwards_lo
;
554 drvs
->rx_drops_mtu
= pport_stats
->rx_drops_mtu_lo
;
555 drvs
->rx_drops_too_many_frags
=
556 pport_stats
->rx_drops_too_many_frags_lo
;
559 static void accumulate_16bit_val(u32
*acc
, u16 val
)
561 #define lo(x) (x & 0xFFFF)
562 #define hi(x) (x & 0xFFFF0000)
563 bool wrapped
= val
< lo(*acc
);
564 u32 newacc
= hi(*acc
) + val
;
568 ACCESS_ONCE(*acc
) = newacc
;
571 static void populate_erx_stats(struct be_adapter
*adapter
,
572 struct be_rx_obj
*rxo
, u32 erx_stat
)
574 if (!BEx_chip(adapter
))
575 rx_stats(rxo
)->rx_drops_no_frags
= erx_stat
;
577 /* below erx HW counter can actually wrap around after
578 * 65535. Driver accumulates a 32-bit value
580 accumulate_16bit_val(&rx_stats(rxo
)->rx_drops_no_frags
,
584 void be_parse_stats(struct be_adapter
*adapter
)
586 struct be_erx_stats_v2
*erx
= be_erx_stats_from_cmd(adapter
);
587 struct be_rx_obj
*rxo
;
591 if (lancer_chip(adapter
)) {
592 populate_lancer_stats(adapter
);
594 if (BE2_chip(adapter
))
595 populate_be_v0_stats(adapter
);
596 else if (BE3_chip(adapter
))
598 populate_be_v1_stats(adapter
);
600 populate_be_v2_stats(adapter
);
602 /* erx_v2 is longer than v0, v1. use v2 for v0, v1 access */
603 for_all_rx_queues(adapter
, rxo
, i
) {
604 erx_stat
= erx
->rx_drops_no_fragments
[rxo
->q
.id
];
605 populate_erx_stats(adapter
, rxo
, erx_stat
);
610 static struct rtnl_link_stats64
*be_get_stats64(struct net_device
*netdev
,
611 struct rtnl_link_stats64
*stats
)
613 struct be_adapter
*adapter
= netdev_priv(netdev
);
614 struct be_drv_stats
*drvs
= &adapter
->drv_stats
;
615 struct be_rx_obj
*rxo
;
616 struct be_tx_obj
*txo
;
621 for_all_rx_queues(adapter
, rxo
, i
) {
622 const struct be_rx_stats
*rx_stats
= rx_stats(rxo
);
625 start
= u64_stats_fetch_begin_irq(&rx_stats
->sync
);
626 pkts
= rx_stats(rxo
)->rx_pkts
;
627 bytes
= rx_stats(rxo
)->rx_bytes
;
628 } while (u64_stats_fetch_retry_irq(&rx_stats
->sync
, start
));
629 stats
->rx_packets
+= pkts
;
630 stats
->rx_bytes
+= bytes
;
631 stats
->multicast
+= rx_stats(rxo
)->rx_mcast_pkts
;
632 stats
->rx_dropped
+= rx_stats(rxo
)->rx_drops_no_skbs
+
633 rx_stats(rxo
)->rx_drops_no_frags
;
636 for_all_tx_queues(adapter
, txo
, i
) {
637 const struct be_tx_stats
*tx_stats
= tx_stats(txo
);
640 start
= u64_stats_fetch_begin_irq(&tx_stats
->sync
);
641 pkts
= tx_stats(txo
)->tx_pkts
;
642 bytes
= tx_stats(txo
)->tx_bytes
;
643 } while (u64_stats_fetch_retry_irq(&tx_stats
->sync
, start
));
644 stats
->tx_packets
+= pkts
;
645 stats
->tx_bytes
+= bytes
;
648 /* bad pkts received */
649 stats
->rx_errors
= drvs
->rx_crc_errors
+
650 drvs
->rx_alignment_symbol_errors
+
651 drvs
->rx_in_range_errors
+
652 drvs
->rx_out_range_errors
+
653 drvs
->rx_frame_too_long
+
654 drvs
->rx_dropped_too_small
+
655 drvs
->rx_dropped_too_short
+
656 drvs
->rx_dropped_header_too_small
+
657 drvs
->rx_dropped_tcp_length
+
658 drvs
->rx_dropped_runt
;
660 /* detailed rx errors */
661 stats
->rx_length_errors
= drvs
->rx_in_range_errors
+
662 drvs
->rx_out_range_errors
+
663 drvs
->rx_frame_too_long
;
665 stats
->rx_crc_errors
= drvs
->rx_crc_errors
;
667 /* frame alignment errors */
668 stats
->rx_frame_errors
= drvs
->rx_alignment_symbol_errors
;
670 /* receiver fifo overrun */
671 /* drops_no_pbuf is no per i/f, it's per BE card */
672 stats
->rx_fifo_errors
= drvs
->rxpp_fifo_overflow_drop
+
673 drvs
->rx_input_fifo_overflow_drop
+
674 drvs
->rx_drops_no_pbuf
;
678 void be_link_status_update(struct be_adapter
*adapter
, u8 link_status
)
680 struct net_device
*netdev
= adapter
->netdev
;
682 if (!(adapter
->flags
& BE_FLAGS_LINK_STATUS_INIT
)) {
683 netif_carrier_off(netdev
);
684 adapter
->flags
|= BE_FLAGS_LINK_STATUS_INIT
;
688 netif_carrier_on(netdev
);
690 netif_carrier_off(netdev
);
692 netdev_info(netdev
, "Link is %s\n", link_status
? "Up" : "Down");
695 static void be_tx_stats_update(struct be_tx_obj
*txo
, struct sk_buff
*skb
)
697 struct be_tx_stats
*stats
= tx_stats(txo
);
698 u64 tx_pkts
= skb_shinfo(skb
)->gso_segs
? : 1;
700 u64_stats_update_begin(&stats
->sync
);
702 stats
->tx_bytes
+= skb
->len
;
703 stats
->tx_pkts
+= tx_pkts
;
704 if (skb
->encapsulation
&& skb
->ip_summed
== CHECKSUM_PARTIAL
)
705 stats
->tx_vxlan_offload_pkts
+= tx_pkts
;
706 u64_stats_update_end(&stats
->sync
);
709 /* Returns number of WRBs needed for the skb */
710 static u32
skb_wrb_cnt(struct sk_buff
*skb
)
712 /* +1 for the header wrb */
713 return 1 + (skb_headlen(skb
) ? 1 : 0) + skb_shinfo(skb
)->nr_frags
;
716 static inline void wrb_fill(struct be_eth_wrb
*wrb
, u64 addr
, int len
)
718 wrb
->frag_pa_hi
= cpu_to_le32(upper_32_bits(addr
));
719 wrb
->frag_pa_lo
= cpu_to_le32(lower_32_bits(addr
));
720 wrb
->frag_len
= cpu_to_le32(len
& ETH_WRB_FRAG_LEN_MASK
);
724 /* A dummy wrb is just all zeros. Using a separate routine for dummy-wrb
725 * to avoid the swap and shift/mask operations in wrb_fill().
727 static inline void wrb_fill_dummy(struct be_eth_wrb
*wrb
)
735 static inline u16
be_get_tx_vlan_tag(struct be_adapter
*adapter
,
741 vlan_tag
= skb_vlan_tag_get(skb
);
742 vlan_prio
= (vlan_tag
& VLAN_PRIO_MASK
) >> VLAN_PRIO_SHIFT
;
743 /* If vlan priority provided by OS is NOT in available bmap */
744 if (!(adapter
->vlan_prio_bmap
& (1 << vlan_prio
)))
745 vlan_tag
= (vlan_tag
& ~VLAN_PRIO_MASK
) |
746 adapter
->recommended_prio_bits
;
751 /* Used only for IP tunnel packets */
752 static u16
skb_inner_ip_proto(struct sk_buff
*skb
)
754 return (inner_ip_hdr(skb
)->version
== 4) ?
755 inner_ip_hdr(skb
)->protocol
: inner_ipv6_hdr(skb
)->nexthdr
;
758 static u16
skb_ip_proto(struct sk_buff
*skb
)
760 return (ip_hdr(skb
)->version
== 4) ?
761 ip_hdr(skb
)->protocol
: ipv6_hdr(skb
)->nexthdr
;
764 static inline bool be_is_txq_full(struct be_tx_obj
*txo
)
766 return atomic_read(&txo
->q
.used
) + BE_MAX_TX_FRAG_COUNT
>= txo
->q
.len
;
769 static inline bool be_can_txq_wake(struct be_tx_obj
*txo
)
771 return atomic_read(&txo
->q
.used
) < txo
->q
.len
/ 2;
774 static inline bool be_is_tx_compl_pending(struct be_tx_obj
*txo
)
776 return atomic_read(&txo
->q
.used
) > txo
->pend_wrb_cnt
;
779 static void be_get_wrb_params_from_skb(struct be_adapter
*adapter
,
781 struct be_wrb_params
*wrb_params
)
785 if (skb_is_gso(skb
)) {
786 BE_WRB_F_SET(wrb_params
->features
, LSO
, 1);
787 wrb_params
->lso_mss
= skb_shinfo(skb
)->gso_size
;
788 if (skb_is_gso_v6(skb
) && !lancer_chip(adapter
))
789 BE_WRB_F_SET(wrb_params
->features
, LSO6
, 1);
790 } else if (skb
->ip_summed
== CHECKSUM_PARTIAL
) {
791 if (skb
->encapsulation
) {
792 BE_WRB_F_SET(wrb_params
->features
, IPCS
, 1);
793 proto
= skb_inner_ip_proto(skb
);
795 proto
= skb_ip_proto(skb
);
797 if (proto
== IPPROTO_TCP
)
798 BE_WRB_F_SET(wrb_params
->features
, TCPCS
, 1);
799 else if (proto
== IPPROTO_UDP
)
800 BE_WRB_F_SET(wrb_params
->features
, UDPCS
, 1);
803 if (skb_vlan_tag_present(skb
)) {
804 BE_WRB_F_SET(wrb_params
->features
, VLAN
, 1);
805 wrb_params
->vlan_tag
= be_get_tx_vlan_tag(adapter
, skb
);
808 BE_WRB_F_SET(wrb_params
->features
, CRC
, 1);
811 static void wrb_fill_hdr(struct be_adapter
*adapter
,
812 struct be_eth_hdr_wrb
*hdr
,
813 struct be_wrb_params
*wrb_params
,
816 memset(hdr
, 0, sizeof(*hdr
));
818 SET_TX_WRB_HDR_BITS(crc
, hdr
,
819 BE_WRB_F_GET(wrb_params
->features
, CRC
));
820 SET_TX_WRB_HDR_BITS(ipcs
, hdr
,
821 BE_WRB_F_GET(wrb_params
->features
, IPCS
));
822 SET_TX_WRB_HDR_BITS(tcpcs
, hdr
,
823 BE_WRB_F_GET(wrb_params
->features
, TCPCS
));
824 SET_TX_WRB_HDR_BITS(udpcs
, hdr
,
825 BE_WRB_F_GET(wrb_params
->features
, UDPCS
));
827 SET_TX_WRB_HDR_BITS(lso
, hdr
,
828 BE_WRB_F_GET(wrb_params
->features
, LSO
));
829 SET_TX_WRB_HDR_BITS(lso6
, hdr
,
830 BE_WRB_F_GET(wrb_params
->features
, LSO6
));
831 SET_TX_WRB_HDR_BITS(lso_mss
, hdr
, wrb_params
->lso_mss
);
833 /* Hack to skip HW VLAN tagging needs evt = 1, compl = 0. When this
834 * hack is not needed, the evt bit is set while ringing DB.
836 SET_TX_WRB_HDR_BITS(event
, hdr
,
837 BE_WRB_F_GET(wrb_params
->features
, VLAN_SKIP_HW
));
838 SET_TX_WRB_HDR_BITS(vlan
, hdr
,
839 BE_WRB_F_GET(wrb_params
->features
, VLAN
));
840 SET_TX_WRB_HDR_BITS(vlan_tag
, hdr
, wrb_params
->vlan_tag
);
842 SET_TX_WRB_HDR_BITS(num_wrb
, hdr
, skb_wrb_cnt(skb
));
843 SET_TX_WRB_HDR_BITS(len
, hdr
, skb
->len
);
844 SET_TX_WRB_HDR_BITS(mgmt
, hdr
,
845 BE_WRB_F_GET(wrb_params
->features
, OS2BMC
));
848 static void unmap_tx_frag(struct device
*dev
, struct be_eth_wrb
*wrb
,
852 u32 frag_len
= le32_to_cpu(wrb
->frag_len
);
855 dma
= (u64
)le32_to_cpu(wrb
->frag_pa_hi
) << 32 |
856 (u64
)le32_to_cpu(wrb
->frag_pa_lo
);
859 dma_unmap_single(dev
, dma
, frag_len
, DMA_TO_DEVICE
);
861 dma_unmap_page(dev
, dma
, frag_len
, DMA_TO_DEVICE
);
865 /* Grab a WRB header for xmit */
866 static u32
be_tx_get_wrb_hdr(struct be_tx_obj
*txo
)
868 u32 head
= txo
->q
.head
;
870 queue_head_inc(&txo
->q
);
874 /* Set up the WRB header for xmit */
875 static void be_tx_setup_wrb_hdr(struct be_adapter
*adapter
,
876 struct be_tx_obj
*txo
,
877 struct be_wrb_params
*wrb_params
,
878 struct sk_buff
*skb
, u16 head
)
880 u32 num_frags
= skb_wrb_cnt(skb
);
881 struct be_queue_info
*txq
= &txo
->q
;
882 struct be_eth_hdr_wrb
*hdr
= queue_index_node(txq
, head
);
884 wrb_fill_hdr(adapter
, hdr
, wrb_params
, skb
);
885 be_dws_cpu_to_le(hdr
, sizeof(*hdr
));
887 BUG_ON(txo
->sent_skb_list
[head
]);
888 txo
->sent_skb_list
[head
] = skb
;
889 txo
->last_req_hdr
= head
;
890 atomic_add(num_frags
, &txq
->used
);
891 txo
->last_req_wrb_cnt
= num_frags
;
892 txo
->pend_wrb_cnt
+= num_frags
;
895 /* Setup a WRB fragment (buffer descriptor) for xmit */
896 static void be_tx_setup_wrb_frag(struct be_tx_obj
*txo
, dma_addr_t busaddr
,
899 struct be_eth_wrb
*wrb
;
900 struct be_queue_info
*txq
= &txo
->q
;
902 wrb
= queue_head_node(txq
);
903 wrb_fill(wrb
, busaddr
, len
);
907 /* Bring the queue back to the state it was in before be_xmit_enqueue() routine
908 * was invoked. The producer index is restored to the previous packet and the
909 * WRBs of the current packet are unmapped. Invoked to handle tx setup errors.
911 static void be_xmit_restore(struct be_adapter
*adapter
,
912 struct be_tx_obj
*txo
, u32 head
, bool map_single
,
916 struct be_eth_wrb
*wrb
;
917 struct be_queue_info
*txq
= &txo
->q
;
919 dev
= &adapter
->pdev
->dev
;
922 /* skip the first wrb (hdr); it's not mapped */
925 wrb
= queue_head_node(txq
);
926 unmap_tx_frag(dev
, wrb
, map_single
);
928 copied
-= le32_to_cpu(wrb
->frag_len
);
935 /* Enqueue the given packet for transmit. This routine allocates WRBs for the
936 * packet, dma maps the packet buffers and sets up the WRBs. Returns the number
937 * of WRBs used up by the packet.
939 static u32
be_xmit_enqueue(struct be_adapter
*adapter
, struct be_tx_obj
*txo
,
941 struct be_wrb_params
*wrb_params
)
943 u32 i
, copied
= 0, wrb_cnt
= skb_wrb_cnt(skb
);
944 struct device
*dev
= &adapter
->pdev
->dev
;
945 struct be_queue_info
*txq
= &txo
->q
;
946 bool map_single
= false;
947 u32 head
= txq
->head
;
951 head
= be_tx_get_wrb_hdr(txo
);
953 if (skb
->len
> skb
->data_len
) {
954 len
= skb_headlen(skb
);
956 busaddr
= dma_map_single(dev
, skb
->data
, len
, DMA_TO_DEVICE
);
957 if (dma_mapping_error(dev
, busaddr
))
960 be_tx_setup_wrb_frag(txo
, busaddr
, len
);
964 for (i
= 0; i
< skb_shinfo(skb
)->nr_frags
; i
++) {
965 const struct skb_frag_struct
*frag
= &skb_shinfo(skb
)->frags
[i
];
966 len
= skb_frag_size(frag
);
968 busaddr
= skb_frag_dma_map(dev
, frag
, 0, len
, DMA_TO_DEVICE
);
969 if (dma_mapping_error(dev
, busaddr
))
971 be_tx_setup_wrb_frag(txo
, busaddr
, len
);
975 be_tx_setup_wrb_hdr(adapter
, txo
, wrb_params
, skb
, head
);
977 be_tx_stats_update(txo
, skb
);
981 adapter
->drv_stats
.dma_map_errors
++;
982 be_xmit_restore(adapter
, txo
, head
, map_single
, copied
);
986 static inline int qnq_async_evt_rcvd(struct be_adapter
*adapter
)
988 return adapter
->flags
& BE_FLAGS_QNQ_ASYNC_EVT_RCVD
;
991 static struct sk_buff
*be_insert_vlan_in_pkt(struct be_adapter
*adapter
,
998 skb
= skb_share_check(skb
, GFP_ATOMIC
);
1002 if (skb_vlan_tag_present(skb
))
1003 vlan_tag
= be_get_tx_vlan_tag(adapter
, skb
);
1005 if (qnq_async_evt_rcvd(adapter
) && adapter
->pvid
) {
1007 vlan_tag
= adapter
->pvid
;
1008 /* f/w workaround to set skip_hw_vlan = 1, informs the F/W to
1009 * skip VLAN insertion
1011 BE_WRB_F_SET(wrb_params
->features
, VLAN_SKIP_HW
, 1);
1015 skb
= vlan_insert_tag_set_proto(skb
, htons(ETH_P_8021Q
),
1022 /* Insert the outer VLAN, if any */
1023 if (adapter
->qnq_vid
) {
1024 vlan_tag
= adapter
->qnq_vid
;
1025 skb
= vlan_insert_tag_set_proto(skb
, htons(ETH_P_8021Q
),
1029 BE_WRB_F_SET(wrb_params
->features
, VLAN_SKIP_HW
, 1);
1035 static bool be_ipv6_exthdr_check(struct sk_buff
*skb
)
1037 struct ethhdr
*eh
= (struct ethhdr
*)skb
->data
;
1038 u16 offset
= ETH_HLEN
;
1040 if (eh
->h_proto
== htons(ETH_P_IPV6
)) {
1041 struct ipv6hdr
*ip6h
= (struct ipv6hdr
*)(skb
->data
+ offset
);
1043 offset
+= sizeof(struct ipv6hdr
);
1044 if (ip6h
->nexthdr
!= NEXTHDR_TCP
&&
1045 ip6h
->nexthdr
!= NEXTHDR_UDP
) {
1046 struct ipv6_opt_hdr
*ehdr
=
1047 (struct ipv6_opt_hdr
*)(skb
->data
+ offset
);
1049 /* offending pkt: 2nd byte following IPv6 hdr is 0xff */
1050 if (ehdr
->hdrlen
== 0xff)
1057 static int be_vlan_tag_tx_chk(struct be_adapter
*adapter
, struct sk_buff
*skb
)
1059 return skb_vlan_tag_present(skb
) || adapter
->pvid
|| adapter
->qnq_vid
;
1062 static int be_ipv6_tx_stall_chk(struct be_adapter
*adapter
, struct sk_buff
*skb
)
1064 return BE3_chip(adapter
) && be_ipv6_exthdr_check(skb
);
1067 static struct sk_buff
*be_lancer_xmit_workarounds(struct be_adapter
*adapter
,
1068 struct sk_buff
*skb
,
1069 struct be_wrb_params
1072 struct vlan_ethhdr
*veh
= (struct vlan_ethhdr
*)skb
->data
;
1073 unsigned int eth_hdr_len
;
1076 /* For padded packets, BE HW modifies tot_len field in IP header
1077 * incorrecly when VLAN tag is inserted by HW.
1078 * For padded packets, Lancer computes incorrect checksum.
1080 eth_hdr_len
= ntohs(skb
->protocol
) == ETH_P_8021Q
?
1081 VLAN_ETH_HLEN
: ETH_HLEN
;
1082 if (skb
->len
<= 60 &&
1083 (lancer_chip(adapter
) || skb_vlan_tag_present(skb
)) &&
1085 ip
= (struct iphdr
*)ip_hdr(skb
);
1086 pskb_trim(skb
, eth_hdr_len
+ ntohs(ip
->tot_len
));
1089 /* If vlan tag is already inlined in the packet, skip HW VLAN
1090 * tagging in pvid-tagging mode
1092 if (be_pvid_tagging_enabled(adapter
) &&
1093 veh
->h_vlan_proto
== htons(ETH_P_8021Q
))
1094 BE_WRB_F_SET(wrb_params
->features
, VLAN_SKIP_HW
, 1);
1096 /* HW has a bug wherein it will calculate CSUM for VLAN
1097 * pkts even though it is disabled.
1098 * Manually insert VLAN in pkt.
1100 if (skb
->ip_summed
!= CHECKSUM_PARTIAL
&&
1101 skb_vlan_tag_present(skb
)) {
1102 skb
= be_insert_vlan_in_pkt(adapter
, skb
, wrb_params
);
1107 /* HW may lockup when VLAN HW tagging is requested on
1108 * certain ipv6 packets. Drop such pkts if the HW workaround to
1109 * skip HW tagging is not enabled by FW.
1111 if (unlikely(be_ipv6_tx_stall_chk(adapter
, skb
) &&
1112 (adapter
->pvid
|| adapter
->qnq_vid
) &&
1113 !qnq_async_evt_rcvd(adapter
)))
1116 /* Manual VLAN tag insertion to prevent:
1117 * ASIC lockup when the ASIC inserts VLAN tag into
1118 * certain ipv6 packets. Insert VLAN tags in driver,
1119 * and set event, completion, vlan bits accordingly
1122 if (be_ipv6_tx_stall_chk(adapter
, skb
) &&
1123 be_vlan_tag_tx_chk(adapter
, skb
)) {
1124 skb
= be_insert_vlan_in_pkt(adapter
, skb
, wrb_params
);
1131 dev_kfree_skb_any(skb
);
1136 static struct sk_buff
*be_xmit_workarounds(struct be_adapter
*adapter
,
1137 struct sk_buff
*skb
,
1138 struct be_wrb_params
*wrb_params
)
1142 /* Lancer, SH and BE3 in SRIOV mode have a bug wherein
1143 * packets that are 32b or less may cause a transmit stall
1144 * on that port. The workaround is to pad such packets
1145 * (len <= 32 bytes) to a minimum length of 36b.
1147 if (skb
->len
<= 32) {
1148 if (skb_put_padto(skb
, 36))
1152 if (BEx_chip(adapter
) || lancer_chip(adapter
)) {
1153 skb
= be_lancer_xmit_workarounds(adapter
, skb
, wrb_params
);
1158 /* The stack can send us skbs with length greater than
1159 * what the HW can handle. Trim the extra bytes.
1161 WARN_ON_ONCE(skb
->len
> BE_MAX_GSO_SIZE
);
1162 err
= pskb_trim(skb
, BE_MAX_GSO_SIZE
);
1168 static void be_xmit_flush(struct be_adapter
*adapter
, struct be_tx_obj
*txo
)
1170 struct be_queue_info
*txq
= &txo
->q
;
1171 struct be_eth_hdr_wrb
*hdr
= queue_index_node(txq
, txo
->last_req_hdr
);
1173 /* Mark the last request eventable if it hasn't been marked already */
1174 if (!(hdr
->dw
[2] & cpu_to_le32(TX_HDR_WRB_EVT
)))
1175 hdr
->dw
[2] |= cpu_to_le32(TX_HDR_WRB_EVT
| TX_HDR_WRB_COMPL
);
1177 /* compose a dummy wrb if there are odd set of wrbs to notify */
1178 if (!lancer_chip(adapter
) && (txo
->pend_wrb_cnt
& 1)) {
1179 wrb_fill_dummy(queue_head_node(txq
));
1180 queue_head_inc(txq
);
1181 atomic_inc(&txq
->used
);
1182 txo
->pend_wrb_cnt
++;
1183 hdr
->dw
[2] &= ~cpu_to_le32(TX_HDR_WRB_NUM_MASK
<<
1184 TX_HDR_WRB_NUM_SHIFT
);
1185 hdr
->dw
[2] |= cpu_to_le32((txo
->last_req_wrb_cnt
+ 1) <<
1186 TX_HDR_WRB_NUM_SHIFT
);
1188 be_txq_notify(adapter
, txo
, txo
->pend_wrb_cnt
);
1189 txo
->pend_wrb_cnt
= 0;
1192 /* OS2BMC related */
1194 #define DHCP_CLIENT_PORT 68
1195 #define DHCP_SERVER_PORT 67
1196 #define NET_BIOS_PORT1 137
1197 #define NET_BIOS_PORT2 138
1198 #define DHCPV6_RAS_PORT 547
1200 #define is_mc_allowed_on_bmc(adapter, eh) \
1201 (!is_multicast_filt_enabled(adapter) && \
1202 is_multicast_ether_addr(eh->h_dest) && \
1203 !is_broadcast_ether_addr(eh->h_dest))
1205 #define is_bc_allowed_on_bmc(adapter, eh) \
1206 (!is_broadcast_filt_enabled(adapter) && \
1207 is_broadcast_ether_addr(eh->h_dest))
1209 #define is_arp_allowed_on_bmc(adapter, skb) \
1210 (is_arp(skb) && is_arp_filt_enabled(adapter))
1212 #define is_broadcast_packet(eh, adapter) \
1213 (is_multicast_ether_addr(eh->h_dest) && \
1214 !compare_ether_addr(eh->h_dest, adapter->netdev->broadcast))
1216 #define is_arp(skb) (skb->protocol == htons(ETH_P_ARP))
1218 #define is_arp_filt_enabled(adapter) \
1219 (adapter->bmc_filt_mask & (BMC_FILT_BROADCAST_ARP))
1221 #define is_dhcp_client_filt_enabled(adapter) \
1222 (adapter->bmc_filt_mask & BMC_FILT_BROADCAST_DHCP_CLIENT)
1224 #define is_dhcp_srvr_filt_enabled(adapter) \
1225 (adapter->bmc_filt_mask & BMC_FILT_BROADCAST_DHCP_SERVER)
1227 #define is_nbios_filt_enabled(adapter) \
1228 (adapter->bmc_filt_mask & BMC_FILT_BROADCAST_NET_BIOS)
1230 #define is_ipv6_na_filt_enabled(adapter) \
1231 (adapter->bmc_filt_mask & \
1232 BMC_FILT_MULTICAST_IPV6_NEIGH_ADVER)
1234 #define is_ipv6_ra_filt_enabled(adapter) \
1235 (adapter->bmc_filt_mask & BMC_FILT_MULTICAST_IPV6_RA)
1237 #define is_ipv6_ras_filt_enabled(adapter) \
1238 (adapter->bmc_filt_mask & BMC_FILT_MULTICAST_IPV6_RAS)
1240 #define is_broadcast_filt_enabled(adapter) \
1241 (adapter->bmc_filt_mask & BMC_FILT_BROADCAST)
1243 #define is_multicast_filt_enabled(adapter) \
1244 (adapter->bmc_filt_mask & BMC_FILT_MULTICAST)
1246 static bool be_send_pkt_to_bmc(struct be_adapter
*adapter
,
1247 struct sk_buff
**skb
)
1249 struct ethhdr
*eh
= (struct ethhdr
*)(*skb
)->data
;
1250 bool os2bmc
= false;
1252 if (!be_is_os2bmc_enabled(adapter
))
1255 if (!is_multicast_ether_addr(eh
->h_dest
))
1258 if (is_mc_allowed_on_bmc(adapter
, eh
) ||
1259 is_bc_allowed_on_bmc(adapter
, eh
) ||
1260 is_arp_allowed_on_bmc(adapter
, (*skb
))) {
1265 if ((*skb
)->protocol
== htons(ETH_P_IPV6
)) {
1266 struct ipv6hdr
*hdr
= ipv6_hdr((*skb
));
1267 u8 nexthdr
= hdr
->nexthdr
;
1269 if (nexthdr
== IPPROTO_ICMPV6
) {
1270 struct icmp6hdr
*icmp6
= icmp6_hdr((*skb
));
1272 switch (icmp6
->icmp6_type
) {
1273 case NDISC_ROUTER_ADVERTISEMENT
:
1274 os2bmc
= is_ipv6_ra_filt_enabled(adapter
);
1276 case NDISC_NEIGHBOUR_ADVERTISEMENT
:
1277 os2bmc
= is_ipv6_na_filt_enabled(adapter
);
1285 if (is_udp_pkt((*skb
))) {
1286 struct udphdr
*udp
= udp_hdr((*skb
));
1288 switch (ntohs(udp
->dest
)) {
1289 case DHCP_CLIENT_PORT
:
1290 os2bmc
= is_dhcp_client_filt_enabled(adapter
);
1292 case DHCP_SERVER_PORT
:
1293 os2bmc
= is_dhcp_srvr_filt_enabled(adapter
);
1295 case NET_BIOS_PORT1
:
1296 case NET_BIOS_PORT2
:
1297 os2bmc
= is_nbios_filt_enabled(adapter
);
1299 case DHCPV6_RAS_PORT
:
1300 os2bmc
= is_ipv6_ras_filt_enabled(adapter
);
1307 /* For packets over a vlan, which are destined
1308 * to BMC, asic expects the vlan to be inline in the packet.
1311 *skb
= be_insert_vlan_in_pkt(adapter
, *skb
, NULL
);
1316 static netdev_tx_t
be_xmit(struct sk_buff
*skb
, struct net_device
*netdev
)
1318 struct be_adapter
*adapter
= netdev_priv(netdev
);
1319 u16 q_idx
= skb_get_queue_mapping(skb
);
1320 struct be_tx_obj
*txo
= &adapter
->tx_obj
[q_idx
];
1321 struct be_wrb_params wrb_params
= { 0 };
1322 bool flush
= !skb
->xmit_more
;
1325 skb
= be_xmit_workarounds(adapter
, skb
, &wrb_params
);
1329 be_get_wrb_params_from_skb(adapter
, skb
, &wrb_params
);
1331 wrb_cnt
= be_xmit_enqueue(adapter
, txo
, skb
, &wrb_params
);
1332 if (unlikely(!wrb_cnt
)) {
1333 dev_kfree_skb_any(skb
);
1337 /* if os2bmc is enabled and if the pkt is destined to bmc,
1338 * enqueue the pkt a 2nd time with mgmt bit set.
1340 if (be_send_pkt_to_bmc(adapter
, &skb
)) {
1341 BE_WRB_F_SET(wrb_params
.features
, OS2BMC
, 1);
1342 wrb_cnt
= be_xmit_enqueue(adapter
, txo
, skb
, &wrb_params
);
1343 if (unlikely(!wrb_cnt
))
1349 if (be_is_txq_full(txo
)) {
1350 netif_stop_subqueue(netdev
, q_idx
);
1351 tx_stats(txo
)->tx_stops
++;
1354 if (flush
|| __netif_subqueue_stopped(netdev
, q_idx
))
1355 be_xmit_flush(adapter
, txo
);
1357 return NETDEV_TX_OK
;
1359 tx_stats(txo
)->tx_drv_drops
++;
1360 /* Flush the already enqueued tx requests */
1361 if (flush
&& txo
->pend_wrb_cnt
)
1362 be_xmit_flush(adapter
, txo
);
1364 return NETDEV_TX_OK
;
1367 static int be_change_mtu(struct net_device
*netdev
, int new_mtu
)
1369 struct be_adapter
*adapter
= netdev_priv(netdev
);
1370 struct device
*dev
= &adapter
->pdev
->dev
;
1372 if (new_mtu
< BE_MIN_MTU
|| new_mtu
> BE_MAX_MTU
) {
1373 dev_info(dev
, "MTU must be between %d and %d bytes\n",
1374 BE_MIN_MTU
, BE_MAX_MTU
);
1378 dev_info(dev
, "MTU changed from %d to %d bytes\n",
1379 netdev
->mtu
, new_mtu
);
1380 netdev
->mtu
= new_mtu
;
1384 static inline bool be_in_all_promisc(struct be_adapter
*adapter
)
1386 return (adapter
->if_flags
& BE_IF_FLAGS_ALL_PROMISCUOUS
) ==
1387 BE_IF_FLAGS_ALL_PROMISCUOUS
;
1390 static int be_set_vlan_promisc(struct be_adapter
*adapter
)
1392 struct device
*dev
= &adapter
->pdev
->dev
;
1395 if (adapter
->if_flags
& BE_IF_FLAGS_VLAN_PROMISCUOUS
)
1398 status
= be_cmd_rx_filter(adapter
, BE_IF_FLAGS_VLAN_PROMISCUOUS
, ON
);
1400 dev_info(dev
, "Enabled VLAN promiscuous mode\n");
1401 adapter
->if_flags
|= BE_IF_FLAGS_VLAN_PROMISCUOUS
;
1403 dev_err(dev
, "Failed to enable VLAN promiscuous mode\n");
1408 static int be_clear_vlan_promisc(struct be_adapter
*adapter
)
1410 struct device
*dev
= &adapter
->pdev
->dev
;
1413 status
= be_cmd_rx_filter(adapter
, BE_IF_FLAGS_VLAN_PROMISCUOUS
, OFF
);
1415 dev_info(dev
, "Disabling VLAN promiscuous mode\n");
1416 adapter
->if_flags
&= ~BE_IF_FLAGS_VLAN_PROMISCUOUS
;
1422 * A max of 64 (BE_NUM_VLANS_SUPPORTED) vlans can be configured in BE.
1423 * If the user configures more, place BE in vlan promiscuous mode.
1425 static int be_vid_config(struct be_adapter
*adapter
)
1427 struct device
*dev
= &adapter
->pdev
->dev
;
1428 u16 vids
[BE_NUM_VLANS_SUPPORTED
];
1432 /* No need to change the VLAN state if the I/F is in promiscuous */
1433 if (adapter
->netdev
->flags
& IFF_PROMISC
)
1436 if (adapter
->vlans_added
> be_max_vlans(adapter
))
1437 return be_set_vlan_promisc(adapter
);
1439 if (adapter
->if_flags
& BE_IF_FLAGS_VLAN_PROMISCUOUS
) {
1440 status
= be_clear_vlan_promisc(adapter
);
1444 /* Construct VLAN Table to give to HW */
1445 for_each_set_bit(i
, adapter
->vids
, VLAN_N_VID
)
1446 vids
[num
++] = cpu_to_le16(i
);
1448 status
= be_cmd_vlan_config(adapter
, adapter
->if_handle
, vids
, num
, 0);
1450 dev_err(dev
, "Setting HW VLAN filtering failed\n");
1451 /* Set to VLAN promisc mode as setting VLAN filter failed */
1452 if (addl_status(status
) == MCC_ADDL_STATUS_INSUFFICIENT_VLANS
||
1453 addl_status(status
) ==
1454 MCC_ADDL_STATUS_INSUFFICIENT_RESOURCES
)
1455 return be_set_vlan_promisc(adapter
);
1460 static int be_vlan_add_vid(struct net_device
*netdev
, __be16 proto
, u16 vid
)
1462 struct be_adapter
*adapter
= netdev_priv(netdev
);
1465 mutex_lock(&adapter
->rx_filter_lock
);
1467 /* Packets with VID 0 are always received by Lancer by default */
1468 if (lancer_chip(adapter
) && vid
== 0)
1471 if (test_bit(vid
, adapter
->vids
))
1474 set_bit(vid
, adapter
->vids
);
1475 adapter
->vlans_added
++;
1477 status
= be_vid_config(adapter
);
1479 mutex_unlock(&adapter
->rx_filter_lock
);
1483 static int be_vlan_rem_vid(struct net_device
*netdev
, __be16 proto
, u16 vid
)
1485 struct be_adapter
*adapter
= netdev_priv(netdev
);
1488 mutex_lock(&adapter
->rx_filter_lock
);
1490 /* Packets with VID 0 are always received by Lancer by default */
1491 if (lancer_chip(adapter
) && vid
== 0)
1494 if (!test_bit(vid
, adapter
->vids
))
1497 clear_bit(vid
, adapter
->vids
);
1498 adapter
->vlans_added
--;
1500 status
= be_vid_config(adapter
);
1502 mutex_unlock(&adapter
->rx_filter_lock
);
1506 static void be_set_all_promisc(struct be_adapter
*adapter
)
1508 be_cmd_rx_filter(adapter
, BE_IF_FLAGS_ALL_PROMISCUOUS
, ON
);
1509 adapter
->if_flags
|= BE_IF_FLAGS_ALL_PROMISCUOUS
;
1512 static void be_set_mc_promisc(struct be_adapter
*adapter
)
1516 if (adapter
->if_flags
& BE_IF_FLAGS_MCAST_PROMISCUOUS
)
1519 status
= be_cmd_rx_filter(adapter
, BE_IF_FLAGS_MCAST_PROMISCUOUS
, ON
);
1521 adapter
->if_flags
|= BE_IF_FLAGS_MCAST_PROMISCUOUS
;
1524 static void be_set_uc_promisc(struct be_adapter
*adapter
)
1528 if (adapter
->if_flags
& BE_IF_FLAGS_PROMISCUOUS
)
1531 status
= be_cmd_rx_filter(adapter
, BE_IF_FLAGS_PROMISCUOUS
, ON
);
1533 adapter
->if_flags
|= BE_IF_FLAGS_PROMISCUOUS
;
1536 static void be_clear_uc_promisc(struct be_adapter
*adapter
)
1540 if (!(adapter
->if_flags
& BE_IF_FLAGS_PROMISCUOUS
))
1543 status
= be_cmd_rx_filter(adapter
, BE_IF_FLAGS_PROMISCUOUS
, OFF
);
1545 adapter
->if_flags
&= ~BE_IF_FLAGS_PROMISCUOUS
;
1548 /* The below 2 functions are the callback args for __dev_mc_sync/dev_uc_sync().
1549 * We use a single callback function for both sync and unsync. We really don't
1550 * add/remove addresses through this callback. But, we use it to detect changes
1551 * to the uc/mc lists. The entire uc/mc list is programmed in be_set_rx_mode().
1553 static int be_uc_list_update(struct net_device
*netdev
,
1554 const unsigned char *addr
)
1556 struct be_adapter
*adapter
= netdev_priv(netdev
);
1558 adapter
->update_uc_list
= true;
1562 static int be_mc_list_update(struct net_device
*netdev
,
1563 const unsigned char *addr
)
1565 struct be_adapter
*adapter
= netdev_priv(netdev
);
1567 adapter
->update_mc_list
= true;
1571 static void be_set_mc_list(struct be_adapter
*adapter
)
1573 struct net_device
*netdev
= adapter
->netdev
;
1574 struct netdev_hw_addr
*ha
;
1575 bool mc_promisc
= false;
1578 netif_addr_lock_bh(netdev
);
1579 __dev_mc_sync(netdev
, be_mc_list_update
, be_mc_list_update
);
1581 if (netdev
->flags
& IFF_PROMISC
) {
1582 adapter
->update_mc_list
= false;
1583 } else if (netdev
->flags
& IFF_ALLMULTI
||
1584 netdev_mc_count(netdev
) > be_max_mc(adapter
)) {
1585 /* Enable multicast promisc if num configured exceeds
1589 adapter
->update_mc_list
= false;
1590 } else if (adapter
->if_flags
& BE_IF_FLAGS_MCAST_PROMISCUOUS
) {
1591 /* Update mc-list unconditionally if the iface was previously
1592 * in mc-promisc mode and now is out of that mode.
1594 adapter
->update_mc_list
= true;
1597 if (adapter
->update_mc_list
) {
1600 /* cache the mc-list in adapter */
1601 netdev_for_each_mc_addr(ha
, netdev
) {
1602 ether_addr_copy(adapter
->mc_list
[i
].mac
, ha
->addr
);
1605 adapter
->mc_count
= netdev_mc_count(netdev
);
1607 netif_addr_unlock_bh(netdev
);
1610 be_set_mc_promisc(adapter
);
1611 } else if (adapter
->update_mc_list
) {
1612 status
= be_cmd_rx_filter(adapter
, BE_IF_FLAGS_MULTICAST
, ON
);
1614 adapter
->if_flags
&= ~BE_IF_FLAGS_MCAST_PROMISCUOUS
;
1616 be_set_mc_promisc(adapter
);
1618 adapter
->update_mc_list
= false;
1622 static void be_clear_mc_list(struct be_adapter
*adapter
)
1624 struct net_device
*netdev
= adapter
->netdev
;
1626 __dev_mc_unsync(netdev
, NULL
);
1627 be_cmd_rx_filter(adapter
, BE_IF_FLAGS_MULTICAST
, OFF
);
1628 adapter
->mc_count
= 0;
1631 static void be_set_uc_list(struct be_adapter
*adapter
)
1633 struct net_device
*netdev
= adapter
->netdev
;
1634 struct netdev_hw_addr
*ha
;
1635 bool uc_promisc
= false;
1636 int curr_uc_macs
= 0, i
;
1638 netif_addr_lock_bh(netdev
);
1639 __dev_uc_sync(netdev
, be_uc_list_update
, be_uc_list_update
);
1641 if (netdev
->flags
& IFF_PROMISC
) {
1642 adapter
->update_uc_list
= false;
1643 } else if (netdev_uc_count(netdev
) > (be_max_uc(adapter
) - 1)) {
1645 adapter
->update_uc_list
= false;
1646 } else if (adapter
->if_flags
& BE_IF_FLAGS_PROMISCUOUS
) {
1647 /* Update uc-list unconditionally if the iface was previously
1648 * in uc-promisc mode and now is out of that mode.
1650 adapter
->update_uc_list
= true;
1653 if (adapter
->update_uc_list
) {
1654 i
= 1; /* First slot is claimed by the Primary MAC */
1656 /* cache the uc-list in adapter array */
1657 netdev_for_each_uc_addr(ha
, netdev
) {
1658 ether_addr_copy(adapter
->uc_list
[i
].mac
, ha
->addr
);
1661 curr_uc_macs
= netdev_uc_count(netdev
);
1663 netif_addr_unlock_bh(netdev
);
1666 be_set_uc_promisc(adapter
);
1667 } else if (adapter
->update_uc_list
) {
1668 be_clear_uc_promisc(adapter
);
1670 for (i
= 0; i
< adapter
->uc_macs
; i
++)
1671 be_cmd_pmac_del(adapter
, adapter
->if_handle
,
1672 adapter
->pmac_id
[i
+ 1], 0);
1674 for (i
= 0; i
< curr_uc_macs
; i
++)
1675 be_cmd_pmac_add(adapter
, adapter
->uc_list
[i
].mac
,
1677 &adapter
->pmac_id
[i
+ 1], 0);
1678 adapter
->uc_macs
= curr_uc_macs
;
1679 adapter
->update_uc_list
= false;
1683 static void be_clear_uc_list(struct be_adapter
*adapter
)
1685 struct net_device
*netdev
= adapter
->netdev
;
1688 __dev_uc_unsync(netdev
, NULL
);
1689 for (i
= 0; i
< adapter
->uc_macs
; i
++)
1690 be_cmd_pmac_del(adapter
, adapter
->if_handle
,
1691 adapter
->pmac_id
[i
+ 1], 0);
1692 adapter
->uc_macs
= 0;
1695 static void __be_set_rx_mode(struct be_adapter
*adapter
)
1697 struct net_device
*netdev
= adapter
->netdev
;
1699 mutex_lock(&adapter
->rx_filter_lock
);
1701 if (netdev
->flags
& IFF_PROMISC
) {
1702 if (!be_in_all_promisc(adapter
))
1703 be_set_all_promisc(adapter
);
1704 } else if (be_in_all_promisc(adapter
)) {
1705 /* We need to re-program the vlan-list or clear
1706 * vlan-promisc mode (if needed) when the interface
1707 * comes out of promisc mode.
1709 be_vid_config(adapter
);
1712 be_set_uc_list(adapter
);
1713 be_set_mc_list(adapter
);
1715 mutex_unlock(&adapter
->rx_filter_lock
);
1718 static void be_work_set_rx_mode(struct work_struct
*work
)
1720 struct be_cmd_work
*cmd_work
=
1721 container_of(work
, struct be_cmd_work
, work
);
1723 __be_set_rx_mode(cmd_work
->adapter
);
1727 static int be_set_vf_mac(struct net_device
*netdev
, int vf
, u8
*mac
)
1729 struct be_adapter
*adapter
= netdev_priv(netdev
);
1730 struct be_vf_cfg
*vf_cfg
= &adapter
->vf_cfg
[vf
];
1733 if (!sriov_enabled(adapter
))
1736 if (!is_valid_ether_addr(mac
) || vf
>= adapter
->num_vfs
)
1739 /* Proceed further only if user provided MAC is different
1742 if (ether_addr_equal(mac
, vf_cfg
->mac_addr
))
1745 if (BEx_chip(adapter
)) {
1746 be_cmd_pmac_del(adapter
, vf_cfg
->if_handle
, vf_cfg
->pmac_id
,
1749 status
= be_cmd_pmac_add(adapter
, mac
, vf_cfg
->if_handle
,
1750 &vf_cfg
->pmac_id
, vf
+ 1);
1752 status
= be_cmd_set_mac(adapter
, mac
, vf_cfg
->if_handle
,
1757 dev_err(&adapter
->pdev
->dev
, "MAC %pM set on VF %d Failed: %#x",
1759 return be_cmd_status(status
);
1762 ether_addr_copy(vf_cfg
->mac_addr
, mac
);
1767 static int be_get_vf_config(struct net_device
*netdev
, int vf
,
1768 struct ifla_vf_info
*vi
)
1770 struct be_adapter
*adapter
= netdev_priv(netdev
);
1771 struct be_vf_cfg
*vf_cfg
= &adapter
->vf_cfg
[vf
];
1773 if (!sriov_enabled(adapter
))
1776 if (vf
>= adapter
->num_vfs
)
1780 vi
->max_tx_rate
= vf_cfg
->tx_rate
;
1781 vi
->min_tx_rate
= 0;
1782 vi
->vlan
= vf_cfg
->vlan_tag
& VLAN_VID_MASK
;
1783 vi
->qos
= vf_cfg
->vlan_tag
>> VLAN_PRIO_SHIFT
;
1784 memcpy(&vi
->mac
, vf_cfg
->mac_addr
, ETH_ALEN
);
1785 vi
->linkstate
= adapter
->vf_cfg
[vf
].plink_tracking
;
1786 vi
->spoofchk
= adapter
->vf_cfg
[vf
].spoofchk
;
1791 static int be_set_vf_tvt(struct be_adapter
*adapter
, int vf
, u16 vlan
)
1793 struct be_vf_cfg
*vf_cfg
= &adapter
->vf_cfg
[vf
];
1794 u16 vids
[BE_NUM_VLANS_SUPPORTED
];
1795 int vf_if_id
= vf_cfg
->if_handle
;
1798 /* Enable Transparent VLAN Tagging */
1799 status
= be_cmd_set_hsw_config(adapter
, vlan
, vf
+ 1, vf_if_id
, 0, 0);
1803 /* Clear pre-programmed VLAN filters on VF if any, if TVT is enabled */
1805 status
= be_cmd_vlan_config(adapter
, vf_if_id
, vids
, 1, vf
+ 1);
1807 dev_info(&adapter
->pdev
->dev
,
1808 "Cleared guest VLANs on VF%d", vf
);
1810 /* After TVT is enabled, disallow VFs to program VLAN filters */
1811 if (vf_cfg
->privileges
& BE_PRIV_FILTMGMT
) {
1812 status
= be_cmd_set_fn_privileges(adapter
, vf_cfg
->privileges
&
1813 ~BE_PRIV_FILTMGMT
, vf
+ 1);
1815 vf_cfg
->privileges
&= ~BE_PRIV_FILTMGMT
;
1820 static int be_clear_vf_tvt(struct be_adapter
*adapter
, int vf
)
1822 struct be_vf_cfg
*vf_cfg
= &adapter
->vf_cfg
[vf
];
1823 struct device
*dev
= &adapter
->pdev
->dev
;
1826 /* Reset Transparent VLAN Tagging. */
1827 status
= be_cmd_set_hsw_config(adapter
, BE_RESET_VLAN_TAG_ID
, vf
+ 1,
1828 vf_cfg
->if_handle
, 0, 0);
1832 /* Allow VFs to program VLAN filtering */
1833 if (!(vf_cfg
->privileges
& BE_PRIV_FILTMGMT
)) {
1834 status
= be_cmd_set_fn_privileges(adapter
, vf_cfg
->privileges
|
1835 BE_PRIV_FILTMGMT
, vf
+ 1);
1837 vf_cfg
->privileges
|= BE_PRIV_FILTMGMT
;
1838 dev_info(dev
, "VF%d: FILTMGMT priv enabled", vf
);
1843 "Disable/re-enable i/f in VM to clear Transparent VLAN tag");
1847 static int be_set_vf_vlan(struct net_device
*netdev
, int vf
, u16 vlan
, u8 qos
)
1849 struct be_adapter
*adapter
= netdev_priv(netdev
);
1850 struct be_vf_cfg
*vf_cfg
= &adapter
->vf_cfg
[vf
];
1853 if (!sriov_enabled(adapter
))
1856 if (vf
>= adapter
->num_vfs
|| vlan
> 4095 || qos
> 7)
1860 vlan
|= qos
<< VLAN_PRIO_SHIFT
;
1861 status
= be_set_vf_tvt(adapter
, vf
, vlan
);
1863 status
= be_clear_vf_tvt(adapter
, vf
);
1867 dev_err(&adapter
->pdev
->dev
,
1868 "VLAN %d config on VF %d failed : %#x\n", vlan
, vf
,
1870 return be_cmd_status(status
);
1873 vf_cfg
->vlan_tag
= vlan
;
1877 static int be_set_vf_tx_rate(struct net_device
*netdev
, int vf
,
1878 int min_tx_rate
, int max_tx_rate
)
1880 struct be_adapter
*adapter
= netdev_priv(netdev
);
1881 struct device
*dev
= &adapter
->pdev
->dev
;
1882 int percent_rate
, status
= 0;
1886 if (!sriov_enabled(adapter
))
1889 if (vf
>= adapter
->num_vfs
)
1898 status
= be_cmd_link_status_query(adapter
, &link_speed
,
1904 dev_err(dev
, "TX-rate setting not allowed when link is down\n");
1909 if (max_tx_rate
< 100 || max_tx_rate
> link_speed
) {
1910 dev_err(dev
, "TX-rate must be between 100 and %d Mbps\n",
1916 /* On Skyhawk the QOS setting must be done only as a % value */
1917 percent_rate
= link_speed
/ 100;
1918 if (skyhawk_chip(adapter
) && (max_tx_rate
% percent_rate
)) {
1919 dev_err(dev
, "TX-rate must be a multiple of %d Mbps\n",
1926 status
= be_cmd_config_qos(adapter
, max_tx_rate
, link_speed
, vf
+ 1);
1930 adapter
->vf_cfg
[vf
].tx_rate
= max_tx_rate
;
1934 dev_err(dev
, "TX-rate setting of %dMbps on VF%d failed\n",
1936 return be_cmd_status(status
);
1939 static int be_set_vf_link_state(struct net_device
*netdev
, int vf
,
1942 struct be_adapter
*adapter
= netdev_priv(netdev
);
1945 if (!sriov_enabled(adapter
))
1948 if (vf
>= adapter
->num_vfs
)
1951 status
= be_cmd_set_logical_link_config(adapter
, link_state
, vf
+1);
1953 dev_err(&adapter
->pdev
->dev
,
1954 "Link state change on VF %d failed: %#x\n", vf
, status
);
1955 return be_cmd_status(status
);
1958 adapter
->vf_cfg
[vf
].plink_tracking
= link_state
;
1963 static int be_set_vf_spoofchk(struct net_device
*netdev
, int vf
, bool enable
)
1965 struct be_adapter
*adapter
= netdev_priv(netdev
);
1966 struct be_vf_cfg
*vf_cfg
= &adapter
->vf_cfg
[vf
];
1970 if (!sriov_enabled(adapter
))
1973 if (vf
>= adapter
->num_vfs
)
1976 if (BEx_chip(adapter
))
1979 if (enable
== vf_cfg
->spoofchk
)
1982 spoofchk
= enable
? ENABLE_MAC_SPOOFCHK
: DISABLE_MAC_SPOOFCHK
;
1984 status
= be_cmd_set_hsw_config(adapter
, 0, vf
+ 1, vf_cfg
->if_handle
,
1987 dev_err(&adapter
->pdev
->dev
,
1988 "Spoofchk change on VF %d failed: %#x\n", vf
, status
);
1989 return be_cmd_status(status
);
1992 vf_cfg
->spoofchk
= enable
;
1996 static void be_aic_update(struct be_aic_obj
*aic
, u64 rx_pkts
, u64 tx_pkts
,
1999 aic
->rx_pkts_prev
= rx_pkts
;
2000 aic
->tx_reqs_prev
= tx_pkts
;
2004 static int be_get_new_eqd(struct be_eq_obj
*eqo
)
2006 struct be_adapter
*adapter
= eqo
->adapter
;
2008 struct be_aic_obj
*aic
;
2009 struct be_rx_obj
*rxo
;
2010 struct be_tx_obj
*txo
;
2011 u64 rx_pkts
= 0, tx_pkts
= 0;
2016 aic
= &adapter
->aic_obj
[eqo
->idx
];
2024 for_all_rx_queues_on_eq(adapter
, eqo
, rxo
, i
) {
2026 start
= u64_stats_fetch_begin_irq(&rxo
->stats
.sync
);
2027 rx_pkts
+= rxo
->stats
.rx_pkts
;
2028 } while (u64_stats_fetch_retry_irq(&rxo
->stats
.sync
, start
));
2031 for_all_tx_queues_on_eq(adapter
, eqo
, txo
, i
) {
2033 start
= u64_stats_fetch_begin_irq(&txo
->stats
.sync
);
2034 tx_pkts
+= txo
->stats
.tx_reqs
;
2035 } while (u64_stats_fetch_retry_irq(&txo
->stats
.sync
, start
));
2038 /* Skip, if wrapped around or first calculation */
2040 if (!aic
->jiffies
|| time_before(now
, aic
->jiffies
) ||
2041 rx_pkts
< aic
->rx_pkts_prev
||
2042 tx_pkts
< aic
->tx_reqs_prev
) {
2043 be_aic_update(aic
, rx_pkts
, tx_pkts
, now
);
2044 return aic
->prev_eqd
;
2047 delta
= jiffies_to_msecs(now
- aic
->jiffies
);
2049 return aic
->prev_eqd
;
2051 pps
= (((u32
)(rx_pkts
- aic
->rx_pkts_prev
) * 1000) / delta
) +
2052 (((u32
)(tx_pkts
- aic
->tx_reqs_prev
) * 1000) / delta
);
2053 eqd
= (pps
/ 15000) << 2;
2057 eqd
= min_t(u32
, eqd
, aic
->max_eqd
);
2058 eqd
= max_t(u32
, eqd
, aic
->min_eqd
);
2060 be_aic_update(aic
, rx_pkts
, tx_pkts
, now
);
2065 /* For Skyhawk-R only */
2066 static u32
be_get_eq_delay_mult_enc(struct be_eq_obj
*eqo
)
2068 struct be_adapter
*adapter
= eqo
->adapter
;
2069 struct be_aic_obj
*aic
= &adapter
->aic_obj
[eqo
->idx
];
2070 ulong now
= jiffies
;
2077 if (jiffies_to_msecs(now
- aic
->jiffies
) < 1)
2078 eqd
= aic
->prev_eqd
;
2080 eqd
= be_get_new_eqd(eqo
);
2083 mult_enc
= R2I_DLY_ENC_1
;
2085 mult_enc
= R2I_DLY_ENC_2
;
2087 mult_enc
= R2I_DLY_ENC_3
;
2089 mult_enc
= R2I_DLY_ENC_0
;
2091 aic
->prev_eqd
= eqd
;
2096 void be_eqd_update(struct be_adapter
*adapter
, bool force_update
)
2098 struct be_set_eqd set_eqd
[MAX_EVT_QS
];
2099 struct be_aic_obj
*aic
;
2100 struct be_eq_obj
*eqo
;
2101 int i
, num
= 0, eqd
;
2103 for_all_evt_queues(adapter
, eqo
, i
) {
2104 aic
= &adapter
->aic_obj
[eqo
->idx
];
2105 eqd
= be_get_new_eqd(eqo
);
2106 if (force_update
|| eqd
!= aic
->prev_eqd
) {
2107 set_eqd
[num
].delay_multiplier
= (eqd
* 65)/100;
2108 set_eqd
[num
].eq_id
= eqo
->q
.id
;
2109 aic
->prev_eqd
= eqd
;
2115 be_cmd_modify_eqd(adapter
, set_eqd
, num
);
2118 static void be_rx_stats_update(struct be_rx_obj
*rxo
,
2119 struct be_rx_compl_info
*rxcp
)
2121 struct be_rx_stats
*stats
= rx_stats(rxo
);
2123 u64_stats_update_begin(&stats
->sync
);
2125 stats
->rx_bytes
+= rxcp
->pkt_size
;
2128 stats
->rx_vxlan_offload_pkts
++;
2129 if (rxcp
->pkt_type
== BE_MULTICAST_PACKET
)
2130 stats
->rx_mcast_pkts
++;
2132 stats
->rx_compl_err
++;
2133 u64_stats_update_end(&stats
->sync
);
2136 static inline bool csum_passed(struct be_rx_compl_info
*rxcp
)
2138 /* L4 checksum is not reliable for non TCP/UDP packets.
2139 * Also ignore ipcksm for ipv6 pkts
2141 return (rxcp
->tcpf
|| rxcp
->udpf
) && rxcp
->l4_csum
&&
2142 (rxcp
->ip_csum
|| rxcp
->ipv6
) && !rxcp
->err
;
2145 static struct be_rx_page_info
*get_rx_page_info(struct be_rx_obj
*rxo
)
2147 struct be_adapter
*adapter
= rxo
->adapter
;
2148 struct be_rx_page_info
*rx_page_info
;
2149 struct be_queue_info
*rxq
= &rxo
->q
;
2150 u32 frag_idx
= rxq
->tail
;
2152 rx_page_info
= &rxo
->page_info_tbl
[frag_idx
];
2153 BUG_ON(!rx_page_info
->page
);
2155 if (rx_page_info
->last_frag
) {
2156 dma_unmap_page(&adapter
->pdev
->dev
,
2157 dma_unmap_addr(rx_page_info
, bus
),
2158 adapter
->big_page_size
, DMA_FROM_DEVICE
);
2159 rx_page_info
->last_frag
= false;
2161 dma_sync_single_for_cpu(&adapter
->pdev
->dev
,
2162 dma_unmap_addr(rx_page_info
, bus
),
2163 rx_frag_size
, DMA_FROM_DEVICE
);
2166 queue_tail_inc(rxq
);
2167 atomic_dec(&rxq
->used
);
2168 return rx_page_info
;
2171 /* Throwaway the data in the Rx completion */
2172 static void be_rx_compl_discard(struct be_rx_obj
*rxo
,
2173 struct be_rx_compl_info
*rxcp
)
2175 struct be_rx_page_info
*page_info
;
2176 u16 i
, num_rcvd
= rxcp
->num_rcvd
;
2178 for (i
= 0; i
< num_rcvd
; i
++) {
2179 page_info
= get_rx_page_info(rxo
);
2180 put_page(page_info
->page
);
2181 memset(page_info
, 0, sizeof(*page_info
));
2186 * skb_fill_rx_data forms a complete skb for an ether frame
2187 * indicated by rxcp.
2189 static void skb_fill_rx_data(struct be_rx_obj
*rxo
, struct sk_buff
*skb
,
2190 struct be_rx_compl_info
*rxcp
)
2192 struct be_rx_page_info
*page_info
;
2194 u16 hdr_len
, curr_frag_len
, remaining
;
2197 page_info
= get_rx_page_info(rxo
);
2198 start
= page_address(page_info
->page
) + page_info
->page_offset
;
2201 /* Copy data in the first descriptor of this completion */
2202 curr_frag_len
= min(rxcp
->pkt_size
, rx_frag_size
);
2204 skb
->len
= curr_frag_len
;
2205 if (curr_frag_len
<= BE_HDR_LEN
) { /* tiny packet */
2206 memcpy(skb
->data
, start
, curr_frag_len
);
2207 /* Complete packet has now been moved to data */
2208 put_page(page_info
->page
);
2210 skb
->tail
+= curr_frag_len
;
2213 memcpy(skb
->data
, start
, hdr_len
);
2214 skb_shinfo(skb
)->nr_frags
= 1;
2215 skb_frag_set_page(skb
, 0, page_info
->page
);
2216 skb_shinfo(skb
)->frags
[0].page_offset
=
2217 page_info
->page_offset
+ hdr_len
;
2218 skb_frag_size_set(&skb_shinfo(skb
)->frags
[0],
2219 curr_frag_len
- hdr_len
);
2220 skb
->data_len
= curr_frag_len
- hdr_len
;
2221 skb
->truesize
+= rx_frag_size
;
2222 skb
->tail
+= hdr_len
;
2224 page_info
->page
= NULL
;
2226 if (rxcp
->pkt_size
<= rx_frag_size
) {
2227 BUG_ON(rxcp
->num_rcvd
!= 1);
2231 /* More frags present for this completion */
2232 remaining
= rxcp
->pkt_size
- curr_frag_len
;
2233 for (i
= 1, j
= 0; i
< rxcp
->num_rcvd
; i
++) {
2234 page_info
= get_rx_page_info(rxo
);
2235 curr_frag_len
= min(remaining
, rx_frag_size
);
2237 /* Coalesce all frags from the same physical page in one slot */
2238 if (page_info
->page_offset
== 0) {
2241 skb_frag_set_page(skb
, j
, page_info
->page
);
2242 skb_shinfo(skb
)->frags
[j
].page_offset
=
2243 page_info
->page_offset
;
2244 skb_frag_size_set(&skb_shinfo(skb
)->frags
[j
], 0);
2245 skb_shinfo(skb
)->nr_frags
++;
2247 put_page(page_info
->page
);
2250 skb_frag_size_add(&skb_shinfo(skb
)->frags
[j
], curr_frag_len
);
2251 skb
->len
+= curr_frag_len
;
2252 skb
->data_len
+= curr_frag_len
;
2253 skb
->truesize
+= rx_frag_size
;
2254 remaining
-= curr_frag_len
;
2255 page_info
->page
= NULL
;
2257 BUG_ON(j
> MAX_SKB_FRAGS
);
2260 /* Process the RX completion indicated by rxcp when GRO is disabled */
2261 static void be_rx_compl_process(struct be_rx_obj
*rxo
, struct napi_struct
*napi
,
2262 struct be_rx_compl_info
*rxcp
)
2264 struct be_adapter
*adapter
= rxo
->adapter
;
2265 struct net_device
*netdev
= adapter
->netdev
;
2266 struct sk_buff
*skb
;
2268 skb
= netdev_alloc_skb_ip_align(netdev
, BE_RX_SKB_ALLOC_SIZE
);
2269 if (unlikely(!skb
)) {
2270 rx_stats(rxo
)->rx_drops_no_skbs
++;
2271 be_rx_compl_discard(rxo
, rxcp
);
2275 skb_fill_rx_data(rxo
, skb
, rxcp
);
2277 if (likely((netdev
->features
& NETIF_F_RXCSUM
) && csum_passed(rxcp
)))
2278 skb
->ip_summed
= CHECKSUM_UNNECESSARY
;
2280 skb_checksum_none_assert(skb
);
2282 skb
->protocol
= eth_type_trans(skb
, netdev
);
2283 skb_record_rx_queue(skb
, rxo
- &adapter
->rx_obj
[0]);
2284 if (netdev
->features
& NETIF_F_RXHASH
)
2285 skb_set_hash(skb
, rxcp
->rss_hash
, PKT_HASH_TYPE_L3
);
2287 skb
->csum_level
= rxcp
->tunneled
;
2288 skb_mark_napi_id(skb
, napi
);
2291 __vlan_hwaccel_put_tag(skb
, htons(ETH_P_8021Q
), rxcp
->vlan_tag
);
2293 netif_receive_skb(skb
);
2296 /* Process the RX completion indicated by rxcp when GRO is enabled */
2297 static void be_rx_compl_process_gro(struct be_rx_obj
*rxo
,
2298 struct napi_struct
*napi
,
2299 struct be_rx_compl_info
*rxcp
)
2301 struct be_adapter
*adapter
= rxo
->adapter
;
2302 struct be_rx_page_info
*page_info
;
2303 struct sk_buff
*skb
= NULL
;
2304 u16 remaining
, curr_frag_len
;
2307 skb
= napi_get_frags(napi
);
2309 be_rx_compl_discard(rxo
, rxcp
);
2313 remaining
= rxcp
->pkt_size
;
2314 for (i
= 0, j
= -1; i
< rxcp
->num_rcvd
; i
++) {
2315 page_info
= get_rx_page_info(rxo
);
2317 curr_frag_len
= min(remaining
, rx_frag_size
);
2319 /* Coalesce all frags from the same physical page in one slot */
2320 if (i
== 0 || page_info
->page_offset
== 0) {
2321 /* First frag or Fresh page */
2323 skb_frag_set_page(skb
, j
, page_info
->page
);
2324 skb_shinfo(skb
)->frags
[j
].page_offset
=
2325 page_info
->page_offset
;
2326 skb_frag_size_set(&skb_shinfo(skb
)->frags
[j
], 0);
2328 put_page(page_info
->page
);
2330 skb_frag_size_add(&skb_shinfo(skb
)->frags
[j
], curr_frag_len
);
2331 skb
->truesize
+= rx_frag_size
;
2332 remaining
-= curr_frag_len
;
2333 memset(page_info
, 0, sizeof(*page_info
));
2335 BUG_ON(j
> MAX_SKB_FRAGS
);
2337 skb_shinfo(skb
)->nr_frags
= j
+ 1;
2338 skb
->len
= rxcp
->pkt_size
;
2339 skb
->data_len
= rxcp
->pkt_size
;
2340 skb
->ip_summed
= CHECKSUM_UNNECESSARY
;
2341 skb_record_rx_queue(skb
, rxo
- &adapter
->rx_obj
[0]);
2342 if (adapter
->netdev
->features
& NETIF_F_RXHASH
)
2343 skb_set_hash(skb
, rxcp
->rss_hash
, PKT_HASH_TYPE_L3
);
2345 skb
->csum_level
= rxcp
->tunneled
;
2348 __vlan_hwaccel_put_tag(skb
, htons(ETH_P_8021Q
), rxcp
->vlan_tag
);
2350 napi_gro_frags(napi
);
2353 static void be_parse_rx_compl_v1(struct be_eth_rx_compl
*compl,
2354 struct be_rx_compl_info
*rxcp
)
2356 rxcp
->pkt_size
= GET_RX_COMPL_V1_BITS(pktsize
, compl);
2357 rxcp
->vlanf
= GET_RX_COMPL_V1_BITS(vtp
, compl);
2358 rxcp
->err
= GET_RX_COMPL_V1_BITS(err
, compl);
2359 rxcp
->tcpf
= GET_RX_COMPL_V1_BITS(tcpf
, compl);
2360 rxcp
->udpf
= GET_RX_COMPL_V1_BITS(udpf
, compl);
2361 rxcp
->ip_csum
= GET_RX_COMPL_V1_BITS(ipcksm
, compl);
2362 rxcp
->l4_csum
= GET_RX_COMPL_V1_BITS(l4_cksm
, compl);
2363 rxcp
->ipv6
= GET_RX_COMPL_V1_BITS(ip_version
, compl);
2364 rxcp
->num_rcvd
= GET_RX_COMPL_V1_BITS(numfrags
, compl);
2365 rxcp
->pkt_type
= GET_RX_COMPL_V1_BITS(cast_enc
, compl);
2366 rxcp
->rss_hash
= GET_RX_COMPL_V1_BITS(rsshash
, compl);
2368 rxcp
->qnq
= GET_RX_COMPL_V1_BITS(qnq
, compl);
2369 rxcp
->vlan_tag
= GET_RX_COMPL_V1_BITS(vlan_tag
, compl);
2371 rxcp
->port
= GET_RX_COMPL_V1_BITS(port
, compl);
2373 GET_RX_COMPL_V1_BITS(tunneled
, compl);
2376 static void be_parse_rx_compl_v0(struct be_eth_rx_compl
*compl,
2377 struct be_rx_compl_info
*rxcp
)
2379 rxcp
->pkt_size
= GET_RX_COMPL_V0_BITS(pktsize
, compl);
2380 rxcp
->vlanf
= GET_RX_COMPL_V0_BITS(vtp
, compl);
2381 rxcp
->err
= GET_RX_COMPL_V0_BITS(err
, compl);
2382 rxcp
->tcpf
= GET_RX_COMPL_V0_BITS(tcpf
, compl);
2383 rxcp
->udpf
= GET_RX_COMPL_V0_BITS(udpf
, compl);
2384 rxcp
->ip_csum
= GET_RX_COMPL_V0_BITS(ipcksm
, compl);
2385 rxcp
->l4_csum
= GET_RX_COMPL_V0_BITS(l4_cksm
, compl);
2386 rxcp
->ipv6
= GET_RX_COMPL_V0_BITS(ip_version
, compl);
2387 rxcp
->num_rcvd
= GET_RX_COMPL_V0_BITS(numfrags
, compl);
2388 rxcp
->pkt_type
= GET_RX_COMPL_V0_BITS(cast_enc
, compl);
2389 rxcp
->rss_hash
= GET_RX_COMPL_V0_BITS(rsshash
, compl);
2391 rxcp
->qnq
= GET_RX_COMPL_V0_BITS(qnq
, compl);
2392 rxcp
->vlan_tag
= GET_RX_COMPL_V0_BITS(vlan_tag
, compl);
2394 rxcp
->port
= GET_RX_COMPL_V0_BITS(port
, compl);
2395 rxcp
->ip_frag
= GET_RX_COMPL_V0_BITS(ip_frag
, compl);
2398 static struct be_rx_compl_info
*be_rx_compl_get(struct be_rx_obj
*rxo
)
2400 struct be_eth_rx_compl
*compl = queue_tail_node(&rxo
->cq
);
2401 struct be_rx_compl_info
*rxcp
= &rxo
->rxcp
;
2402 struct be_adapter
*adapter
= rxo
->adapter
;
2404 /* For checking the valid bit it is Ok to use either definition as the
2405 * valid bit is at the same position in both v0 and v1 Rx compl */
2406 if (compl->dw
[offsetof(struct amap_eth_rx_compl_v1
, valid
) / 32] == 0)
2410 be_dws_le_to_cpu(compl, sizeof(*compl));
2412 if (adapter
->be3_native
)
2413 be_parse_rx_compl_v1(compl, rxcp
);
2415 be_parse_rx_compl_v0(compl, rxcp
);
2421 /* In QNQ modes, if qnq bit is not set, then the packet was
2422 * tagged only with the transparent outer vlan-tag and must
2423 * not be treated as a vlan packet by host
2425 if (be_is_qnq_mode(adapter
) && !rxcp
->qnq
)
2428 if (!lancer_chip(adapter
))
2429 rxcp
->vlan_tag
= swab16(rxcp
->vlan_tag
);
2431 if (adapter
->pvid
== (rxcp
->vlan_tag
& VLAN_VID_MASK
) &&
2432 !test_bit(rxcp
->vlan_tag
, adapter
->vids
))
2436 /* As the compl has been parsed, reset it; we wont touch it again */
2437 compl->dw
[offsetof(struct amap_eth_rx_compl_v1
, valid
) / 32] = 0;
2439 queue_tail_inc(&rxo
->cq
);
2443 static inline struct page
*be_alloc_pages(u32 size
, gfp_t gfp
)
2445 u32 order
= get_order(size
);
2449 return alloc_pages(gfp
, order
);
2453 * Allocate a page, split it to fragments of size rx_frag_size and post as
2454 * receive buffers to BE
2456 static void be_post_rx_frags(struct be_rx_obj
*rxo
, gfp_t gfp
, u32 frags_needed
)
2458 struct be_adapter
*adapter
= rxo
->adapter
;
2459 struct be_rx_page_info
*page_info
= NULL
, *prev_page_info
= NULL
;
2460 struct be_queue_info
*rxq
= &rxo
->q
;
2461 struct page
*pagep
= NULL
;
2462 struct device
*dev
= &adapter
->pdev
->dev
;
2463 struct be_eth_rx_d
*rxd
;
2464 u64 page_dmaaddr
= 0, frag_dmaaddr
;
2465 u32 posted
, page_offset
= 0, notify
= 0;
2467 page_info
= &rxo
->page_info_tbl
[rxq
->head
];
2468 for (posted
= 0; posted
< frags_needed
&& !page_info
->page
; posted
++) {
2470 pagep
= be_alloc_pages(adapter
->big_page_size
, gfp
);
2471 if (unlikely(!pagep
)) {
2472 rx_stats(rxo
)->rx_post_fail
++;
2475 page_dmaaddr
= dma_map_page(dev
, pagep
, 0,
2476 adapter
->big_page_size
,
2478 if (dma_mapping_error(dev
, page_dmaaddr
)) {
2481 adapter
->drv_stats
.dma_map_errors
++;
2487 page_offset
+= rx_frag_size
;
2489 page_info
->page_offset
= page_offset
;
2490 page_info
->page
= pagep
;
2492 rxd
= queue_head_node(rxq
);
2493 frag_dmaaddr
= page_dmaaddr
+ page_info
->page_offset
;
2494 rxd
->fragpa_lo
= cpu_to_le32(frag_dmaaddr
& 0xFFFFFFFF);
2495 rxd
->fragpa_hi
= cpu_to_le32(upper_32_bits(frag_dmaaddr
));
2497 /* Any space left in the current big page for another frag? */
2498 if ((page_offset
+ rx_frag_size
+ rx_frag_size
) >
2499 adapter
->big_page_size
) {
2501 page_info
->last_frag
= true;
2502 dma_unmap_addr_set(page_info
, bus
, page_dmaaddr
);
2504 dma_unmap_addr_set(page_info
, bus
, frag_dmaaddr
);
2507 prev_page_info
= page_info
;
2508 queue_head_inc(rxq
);
2509 page_info
= &rxo
->page_info_tbl
[rxq
->head
];
2512 /* Mark the last frag of a page when we break out of the above loop
2513 * with no more slots available in the RXQ
2516 prev_page_info
->last_frag
= true;
2517 dma_unmap_addr_set(prev_page_info
, bus
, page_dmaaddr
);
2521 atomic_add(posted
, &rxq
->used
);
2522 if (rxo
->rx_post_starved
)
2523 rxo
->rx_post_starved
= false;
2525 notify
= min(MAX_NUM_POST_ERX_DB
, posted
);
2526 be_rxq_notify(adapter
, rxq
->id
, notify
);
2529 } else if (atomic_read(&rxq
->used
) == 0) {
2530 /* Let be_worker replenish when memory is available */
2531 rxo
->rx_post_starved
= true;
2535 static struct be_tx_compl_info
*be_tx_compl_get(struct be_tx_obj
*txo
)
2537 struct be_queue_info
*tx_cq
= &txo
->cq
;
2538 struct be_tx_compl_info
*txcp
= &txo
->txcp
;
2539 struct be_eth_tx_compl
*compl = queue_tail_node(tx_cq
);
2541 if (compl->dw
[offsetof(struct amap_eth_tx_compl
, valid
) / 32] == 0)
2544 /* Ensure load ordering of valid bit dword and other dwords below */
2546 be_dws_le_to_cpu(compl, sizeof(*compl));
2548 txcp
->status
= GET_TX_COMPL_BITS(status
, compl);
2549 txcp
->end_index
= GET_TX_COMPL_BITS(wrb_index
, compl);
2551 compl->dw
[offsetof(struct amap_eth_tx_compl
, valid
) / 32] = 0;
2552 queue_tail_inc(tx_cq
);
2556 static u16
be_tx_compl_process(struct be_adapter
*adapter
,
2557 struct be_tx_obj
*txo
, u16 last_index
)
2559 struct sk_buff
**sent_skbs
= txo
->sent_skb_list
;
2560 struct be_queue_info
*txq
= &txo
->q
;
2561 struct sk_buff
*skb
= NULL
;
2562 bool unmap_skb_hdr
= false;
2563 struct be_eth_wrb
*wrb
;
2568 if (sent_skbs
[txq
->tail
]) {
2569 /* Free skb from prev req */
2571 dev_consume_skb_any(skb
);
2572 skb
= sent_skbs
[txq
->tail
];
2573 sent_skbs
[txq
->tail
] = NULL
;
2574 queue_tail_inc(txq
); /* skip hdr wrb */
2576 unmap_skb_hdr
= true;
2578 wrb
= queue_tail_node(txq
);
2579 frag_index
= txq
->tail
;
2580 unmap_tx_frag(&adapter
->pdev
->dev
, wrb
,
2581 (unmap_skb_hdr
&& skb_headlen(skb
)));
2582 unmap_skb_hdr
= false;
2583 queue_tail_inc(txq
);
2585 } while (frag_index
!= last_index
);
2586 dev_consume_skb_any(skb
);
2591 /* Return the number of events in the event queue */
2592 static inline int events_get(struct be_eq_obj
*eqo
)
2594 struct be_eq_entry
*eqe
;
2598 eqe
= queue_tail_node(&eqo
->q
);
2605 queue_tail_inc(&eqo
->q
);
2611 /* Leaves the EQ is disarmed state */
2612 static void be_eq_clean(struct be_eq_obj
*eqo
)
2614 int num
= events_get(eqo
);
2616 be_eq_notify(eqo
->adapter
, eqo
->q
.id
, false, true, num
, 0);
2619 /* Free posted rx buffers that were not used */
2620 static void be_rxq_clean(struct be_rx_obj
*rxo
)
2622 struct be_queue_info
*rxq
= &rxo
->q
;
2623 struct be_rx_page_info
*page_info
;
2625 while (atomic_read(&rxq
->used
) > 0) {
2626 page_info
= get_rx_page_info(rxo
);
2627 put_page(page_info
->page
);
2628 memset(page_info
, 0, sizeof(*page_info
));
2630 BUG_ON(atomic_read(&rxq
->used
));
2635 static void be_rx_cq_clean(struct be_rx_obj
*rxo
)
2637 struct be_queue_info
*rx_cq
= &rxo
->cq
;
2638 struct be_rx_compl_info
*rxcp
;
2639 struct be_adapter
*adapter
= rxo
->adapter
;
2642 /* Consume pending rx completions.
2643 * Wait for the flush completion (identified by zero num_rcvd)
2644 * to arrive. Notify CQ even when there are no more CQ entries
2645 * for HW to flush partially coalesced CQ entries.
2646 * In Lancer, there is no need to wait for flush compl.
2649 rxcp
= be_rx_compl_get(rxo
);
2651 if (lancer_chip(adapter
))
2654 if (flush_wait
++ > 50 ||
2655 be_check_error(adapter
,
2657 dev_warn(&adapter
->pdev
->dev
,
2658 "did not receive flush compl\n");
2661 be_cq_notify(adapter
, rx_cq
->id
, true, 0);
2664 be_rx_compl_discard(rxo
, rxcp
);
2665 be_cq_notify(adapter
, rx_cq
->id
, false, 1);
2666 if (rxcp
->num_rcvd
== 0)
2671 /* After cleanup, leave the CQ in unarmed state */
2672 be_cq_notify(adapter
, rx_cq
->id
, false, 0);
2675 static void be_tx_compl_clean(struct be_adapter
*adapter
)
2677 struct device
*dev
= &adapter
->pdev
->dev
;
2678 u16 cmpl
= 0, timeo
= 0, num_wrbs
= 0;
2679 struct be_tx_compl_info
*txcp
;
2680 struct be_queue_info
*txq
;
2681 u32 end_idx
, notified_idx
;
2682 struct be_tx_obj
*txo
;
2683 int i
, pending_txqs
;
2685 /* Stop polling for compls when HW has been silent for 10ms */
2687 pending_txqs
= adapter
->num_tx_qs
;
2689 for_all_tx_queues(adapter
, txo
, i
) {
2693 while ((txcp
= be_tx_compl_get(txo
))) {
2695 be_tx_compl_process(adapter
, txo
,
2700 be_cq_notify(adapter
, txo
->cq
.id
, false, cmpl
);
2701 atomic_sub(num_wrbs
, &txq
->used
);
2704 if (!be_is_tx_compl_pending(txo
))
2708 if (pending_txqs
== 0 || ++timeo
> 10 ||
2709 be_check_error(adapter
, BE_ERROR_HW
))
2715 /* Free enqueued TX that was never notified to HW */
2716 for_all_tx_queues(adapter
, txo
, i
) {
2719 if (atomic_read(&txq
->used
)) {
2720 dev_info(dev
, "txq%d: cleaning %d pending tx-wrbs\n",
2721 i
, atomic_read(&txq
->used
));
2722 notified_idx
= txq
->tail
;
2723 end_idx
= txq
->tail
;
2724 index_adv(&end_idx
, atomic_read(&txq
->used
) - 1,
2726 /* Use the tx-compl process logic to handle requests
2727 * that were not sent to the HW.
2729 num_wrbs
= be_tx_compl_process(adapter
, txo
, end_idx
);
2730 atomic_sub(num_wrbs
, &txq
->used
);
2731 BUG_ON(atomic_read(&txq
->used
));
2732 txo
->pend_wrb_cnt
= 0;
2733 /* Since hw was never notified of these requests,
2736 txq
->head
= notified_idx
;
2737 txq
->tail
= notified_idx
;
2742 static void be_evt_queues_destroy(struct be_adapter
*adapter
)
2744 struct be_eq_obj
*eqo
;
2747 for_all_evt_queues(adapter
, eqo
, i
) {
2748 if (eqo
->q
.created
) {
2750 be_cmd_q_destroy(adapter
, &eqo
->q
, QTYPE_EQ
);
2751 napi_hash_del(&eqo
->napi
);
2752 netif_napi_del(&eqo
->napi
);
2753 free_cpumask_var(eqo
->affinity_mask
);
2755 be_queue_free(adapter
, &eqo
->q
);
2759 static int be_evt_queues_create(struct be_adapter
*adapter
)
2761 struct be_queue_info
*eq
;
2762 struct be_eq_obj
*eqo
;
2763 struct be_aic_obj
*aic
;
2766 /* need enough EQs to service both RX and TX queues */
2767 adapter
->num_evt_qs
= min_t(u16
, num_irqs(adapter
),
2768 max(adapter
->cfg_num_rx_irqs
,
2769 adapter
->cfg_num_tx_irqs
));
2771 for_all_evt_queues(adapter
, eqo
, i
) {
2772 int numa_node
= dev_to_node(&adapter
->pdev
->dev
);
2774 aic
= &adapter
->aic_obj
[i
];
2775 eqo
->adapter
= adapter
;
2777 aic
->max_eqd
= BE_MAX_EQD
;
2781 rc
= be_queue_alloc(adapter
, eq
, EVNT_Q_LEN
,
2782 sizeof(struct be_eq_entry
));
2786 rc
= be_cmd_eq_create(adapter
, eqo
);
2790 if (!zalloc_cpumask_var(&eqo
->affinity_mask
, GFP_KERNEL
))
2792 cpumask_set_cpu(cpumask_local_spread(i
, numa_node
),
2793 eqo
->affinity_mask
);
2794 netif_napi_add(adapter
->netdev
, &eqo
->napi
, be_poll
,
2800 static void be_mcc_queues_destroy(struct be_adapter
*adapter
)
2802 struct be_queue_info
*q
;
2804 q
= &adapter
->mcc_obj
.q
;
2806 be_cmd_q_destroy(adapter
, q
, QTYPE_MCCQ
);
2807 be_queue_free(adapter
, q
);
2809 q
= &adapter
->mcc_obj
.cq
;
2811 be_cmd_q_destroy(adapter
, q
, QTYPE_CQ
);
2812 be_queue_free(adapter
, q
);
2815 /* Must be called only after TX qs are created as MCC shares TX EQ */
2816 static int be_mcc_queues_create(struct be_adapter
*adapter
)
2818 struct be_queue_info
*q
, *cq
;
2820 cq
= &adapter
->mcc_obj
.cq
;
2821 if (be_queue_alloc(adapter
, cq
, MCC_CQ_LEN
,
2822 sizeof(struct be_mcc_compl
)))
2825 /* Use the default EQ for MCC completions */
2826 if (be_cmd_cq_create(adapter
, cq
, &mcc_eqo(adapter
)->q
, true, 0))
2829 q
= &adapter
->mcc_obj
.q
;
2830 if (be_queue_alloc(adapter
, q
, MCC_Q_LEN
, sizeof(struct be_mcc_wrb
)))
2831 goto mcc_cq_destroy
;
2833 if (be_cmd_mccq_create(adapter
, q
, cq
))
2839 be_queue_free(adapter
, q
);
2841 be_cmd_q_destroy(adapter
, cq
, QTYPE_CQ
);
2843 be_queue_free(adapter
, cq
);
2848 static void be_tx_queues_destroy(struct be_adapter
*adapter
)
2850 struct be_queue_info
*q
;
2851 struct be_tx_obj
*txo
;
2854 for_all_tx_queues(adapter
, txo
, i
) {
2857 be_cmd_q_destroy(adapter
, q
, QTYPE_TXQ
);
2858 be_queue_free(adapter
, q
);
2862 be_cmd_q_destroy(adapter
, q
, QTYPE_CQ
);
2863 be_queue_free(adapter
, q
);
2867 static int be_tx_qs_create(struct be_adapter
*adapter
)
2869 struct be_queue_info
*cq
;
2870 struct be_tx_obj
*txo
;
2871 struct be_eq_obj
*eqo
;
2874 adapter
->num_tx_qs
= min(adapter
->num_evt_qs
, adapter
->cfg_num_tx_irqs
);
2876 for_all_tx_queues(adapter
, txo
, i
) {
2878 status
= be_queue_alloc(adapter
, cq
, TX_CQ_LEN
,
2879 sizeof(struct be_eth_tx_compl
));
2883 u64_stats_init(&txo
->stats
.sync
);
2884 u64_stats_init(&txo
->stats
.sync_compl
);
2886 /* If num_evt_qs is less than num_tx_qs, then more than
2887 * one txq share an eq
2889 eqo
= &adapter
->eq_obj
[i
% adapter
->num_evt_qs
];
2890 status
= be_cmd_cq_create(adapter
, cq
, &eqo
->q
, false, 3);
2894 status
= be_queue_alloc(adapter
, &txo
->q
, TX_Q_LEN
,
2895 sizeof(struct be_eth_wrb
));
2899 status
= be_cmd_txq_create(adapter
, txo
);
2903 netif_set_xps_queue(adapter
->netdev
, eqo
->affinity_mask
,
2907 dev_info(&adapter
->pdev
->dev
, "created %d TX queue(s)\n",
2908 adapter
->num_tx_qs
);
2912 static void be_rx_cqs_destroy(struct be_adapter
*adapter
)
2914 struct be_queue_info
*q
;
2915 struct be_rx_obj
*rxo
;
2918 for_all_rx_queues(adapter
, rxo
, i
) {
2921 be_cmd_q_destroy(adapter
, q
, QTYPE_CQ
);
2922 be_queue_free(adapter
, q
);
2926 static int be_rx_cqs_create(struct be_adapter
*adapter
)
2928 struct be_queue_info
*eq
, *cq
;
2929 struct be_rx_obj
*rxo
;
2932 adapter
->num_rss_qs
=
2933 min(adapter
->num_evt_qs
, adapter
->cfg_num_rx_irqs
);
2935 /* We'll use RSS only if atleast 2 RSS rings are supported. */
2936 if (adapter
->num_rss_qs
< 2)
2937 adapter
->num_rss_qs
= 0;
2939 adapter
->num_rx_qs
= adapter
->num_rss_qs
+ adapter
->need_def_rxq
;
2941 /* When the interface is not capable of RSS rings (and there is no
2942 * need to create a default RXQ) we'll still need one RXQ
2944 if (adapter
->num_rx_qs
== 0)
2945 adapter
->num_rx_qs
= 1;
2947 adapter
->big_page_size
= (1 << get_order(rx_frag_size
)) * PAGE_SIZE
;
2948 for_all_rx_queues(adapter
, rxo
, i
) {
2949 rxo
->adapter
= adapter
;
2951 rc
= be_queue_alloc(adapter
, cq
, RX_CQ_LEN
,
2952 sizeof(struct be_eth_rx_compl
));
2956 u64_stats_init(&rxo
->stats
.sync
);
2957 eq
= &adapter
->eq_obj
[i
% adapter
->num_evt_qs
].q
;
2958 rc
= be_cmd_cq_create(adapter
, cq
, eq
, false, 3);
2963 dev_info(&adapter
->pdev
->dev
,
2964 "created %d RX queue(s)\n", adapter
->num_rx_qs
);
2968 static irqreturn_t
be_intx(int irq
, void *dev
)
2970 struct be_eq_obj
*eqo
= dev
;
2971 struct be_adapter
*adapter
= eqo
->adapter
;
2974 /* IRQ is not expected when NAPI is scheduled as the EQ
2975 * will not be armed.
2976 * But, this can happen on Lancer INTx where it takes
2977 * a while to de-assert INTx or in BE2 where occasionaly
2978 * an interrupt may be raised even when EQ is unarmed.
2979 * If NAPI is already scheduled, then counting & notifying
2980 * events will orphan them.
2982 if (napi_schedule_prep(&eqo
->napi
)) {
2983 num_evts
= events_get(eqo
);
2984 __napi_schedule(&eqo
->napi
);
2986 eqo
->spurious_intr
= 0;
2988 be_eq_notify(adapter
, eqo
->q
.id
, false, true, num_evts
, 0);
2990 /* Return IRQ_HANDLED only for the the first spurious intr
2991 * after a valid intr to stop the kernel from branding
2992 * this irq as a bad one!
2994 if (num_evts
|| eqo
->spurious_intr
++ == 0)
3000 static irqreturn_t
be_msix(int irq
, void *dev
)
3002 struct be_eq_obj
*eqo
= dev
;
3004 be_eq_notify(eqo
->adapter
, eqo
->q
.id
, false, true, 0, 0);
3005 napi_schedule(&eqo
->napi
);
3009 static inline bool do_gro(struct be_rx_compl_info
*rxcp
)
3011 return (rxcp
->tcpf
&& !rxcp
->err
&& rxcp
->l4_csum
) ? true : false;
3014 static int be_process_rx(struct be_rx_obj
*rxo
, struct napi_struct
*napi
,
3015 int budget
, int polling
)
3017 struct be_adapter
*adapter
= rxo
->adapter
;
3018 struct be_queue_info
*rx_cq
= &rxo
->cq
;
3019 struct be_rx_compl_info
*rxcp
;
3021 u32 frags_consumed
= 0;
3023 for (work_done
= 0; work_done
< budget
; work_done
++) {
3024 rxcp
= be_rx_compl_get(rxo
);
3028 /* Is it a flush compl that has no data */
3029 if (unlikely(rxcp
->num_rcvd
== 0))
3032 /* Discard compl with partial DMA Lancer B0 */
3033 if (unlikely(!rxcp
->pkt_size
)) {
3034 be_rx_compl_discard(rxo
, rxcp
);
3038 /* On BE drop pkts that arrive due to imperfect filtering in
3039 * promiscuous mode on some skews
3041 if (unlikely(rxcp
->port
!= adapter
->port_num
&&
3042 !lancer_chip(adapter
))) {
3043 be_rx_compl_discard(rxo
, rxcp
);
3047 /* Don't do gro when we're busy_polling */
3048 if (do_gro(rxcp
) && polling
!= BUSY_POLLING
)
3049 be_rx_compl_process_gro(rxo
, napi
, rxcp
);
3051 be_rx_compl_process(rxo
, napi
, rxcp
);
3054 frags_consumed
+= rxcp
->num_rcvd
;
3055 be_rx_stats_update(rxo
, rxcp
);
3059 be_cq_notify(adapter
, rx_cq
->id
, true, work_done
);
3061 /* When an rx-obj gets into post_starved state, just
3062 * let be_worker do the posting.
3064 if (atomic_read(&rxo
->q
.used
) < RX_FRAGS_REFILL_WM
&&
3065 !rxo
->rx_post_starved
)
3066 be_post_rx_frags(rxo
, GFP_ATOMIC
,
3067 max_t(u32
, MAX_RX_POST
,
3074 static inline void be_update_tx_err(struct be_tx_obj
*txo
, u8 status
)
3077 case BE_TX_COMP_HDR_PARSE_ERR
:
3078 tx_stats(txo
)->tx_hdr_parse_err
++;
3080 case BE_TX_COMP_NDMA_ERR
:
3081 tx_stats(txo
)->tx_dma_err
++;
3083 case BE_TX_COMP_ACL_ERR
:
3084 tx_stats(txo
)->tx_spoof_check_err
++;
3089 static inline void lancer_update_tx_err(struct be_tx_obj
*txo
, u8 status
)
3092 case LANCER_TX_COMP_LSO_ERR
:
3093 tx_stats(txo
)->tx_tso_err
++;
3095 case LANCER_TX_COMP_HSW_DROP_MAC_ERR
:
3096 case LANCER_TX_COMP_HSW_DROP_VLAN_ERR
:
3097 tx_stats(txo
)->tx_spoof_check_err
++;
3099 case LANCER_TX_COMP_QINQ_ERR
:
3100 tx_stats(txo
)->tx_qinq_err
++;
3102 case LANCER_TX_COMP_PARITY_ERR
:
3103 tx_stats(txo
)->tx_internal_parity_err
++;
3105 case LANCER_TX_COMP_DMA_ERR
:
3106 tx_stats(txo
)->tx_dma_err
++;
3111 static void be_process_tx(struct be_adapter
*adapter
, struct be_tx_obj
*txo
,
3114 int num_wrbs
= 0, work_done
= 0;
3115 struct be_tx_compl_info
*txcp
;
3117 while ((txcp
= be_tx_compl_get(txo
))) {
3118 num_wrbs
+= be_tx_compl_process(adapter
, txo
, txcp
->end_index
);
3122 if (lancer_chip(adapter
))
3123 lancer_update_tx_err(txo
, txcp
->status
);
3125 be_update_tx_err(txo
, txcp
->status
);
3130 be_cq_notify(adapter
, txo
->cq
.id
, true, work_done
);
3131 atomic_sub(num_wrbs
, &txo
->q
.used
);
3133 /* As Tx wrbs have been freed up, wake up netdev queue
3134 * if it was stopped due to lack of tx wrbs. */
3135 if (__netif_subqueue_stopped(adapter
->netdev
, idx
) &&
3136 be_can_txq_wake(txo
)) {
3137 netif_wake_subqueue(adapter
->netdev
, idx
);
3140 u64_stats_update_begin(&tx_stats(txo
)->sync_compl
);
3141 tx_stats(txo
)->tx_compl
+= work_done
;
3142 u64_stats_update_end(&tx_stats(txo
)->sync_compl
);
3146 #ifdef CONFIG_NET_RX_BUSY_POLL
3147 static inline bool be_lock_napi(struct be_eq_obj
*eqo
)
3151 spin_lock(&eqo
->lock
); /* BH is already disabled */
3152 if (eqo
->state
& BE_EQ_LOCKED
) {
3153 WARN_ON(eqo
->state
& BE_EQ_NAPI
);
3154 eqo
->state
|= BE_EQ_NAPI_YIELD
;
3157 eqo
->state
= BE_EQ_NAPI
;
3159 spin_unlock(&eqo
->lock
);
3163 static inline void be_unlock_napi(struct be_eq_obj
*eqo
)
3165 spin_lock(&eqo
->lock
); /* BH is already disabled */
3167 WARN_ON(eqo
->state
& (BE_EQ_POLL
| BE_EQ_NAPI_YIELD
));
3168 eqo
->state
= BE_EQ_IDLE
;
3170 spin_unlock(&eqo
->lock
);
3173 static inline bool be_lock_busy_poll(struct be_eq_obj
*eqo
)
3177 spin_lock_bh(&eqo
->lock
);
3178 if (eqo
->state
& BE_EQ_LOCKED
) {
3179 eqo
->state
|= BE_EQ_POLL_YIELD
;
3182 eqo
->state
|= BE_EQ_POLL
;
3184 spin_unlock_bh(&eqo
->lock
);
3188 static inline void be_unlock_busy_poll(struct be_eq_obj
*eqo
)
3190 spin_lock_bh(&eqo
->lock
);
3192 WARN_ON(eqo
->state
& (BE_EQ_NAPI
));
3193 eqo
->state
= BE_EQ_IDLE
;
3195 spin_unlock_bh(&eqo
->lock
);
3198 static inline void be_enable_busy_poll(struct be_eq_obj
*eqo
)
3200 spin_lock_init(&eqo
->lock
);
3201 eqo
->state
= BE_EQ_IDLE
;
3204 static inline void be_disable_busy_poll(struct be_eq_obj
*eqo
)
3208 /* It's enough to just acquire napi lock on the eqo to stop
3209 * be_busy_poll() from processing any queueus.
3211 while (!be_lock_napi(eqo
))
3217 #else /* CONFIG_NET_RX_BUSY_POLL */
3219 static inline bool be_lock_napi(struct be_eq_obj
*eqo
)
3224 static inline void be_unlock_napi(struct be_eq_obj
*eqo
)
3228 static inline bool be_lock_busy_poll(struct be_eq_obj
*eqo
)
3233 static inline void be_unlock_busy_poll(struct be_eq_obj
*eqo
)
3237 static inline void be_enable_busy_poll(struct be_eq_obj
*eqo
)
3241 static inline void be_disable_busy_poll(struct be_eq_obj
*eqo
)
3244 #endif /* CONFIG_NET_RX_BUSY_POLL */
3246 int be_poll(struct napi_struct
*napi
, int budget
)
3248 struct be_eq_obj
*eqo
= container_of(napi
, struct be_eq_obj
, napi
);
3249 struct be_adapter
*adapter
= eqo
->adapter
;
3250 int max_work
= 0, work
, i
, num_evts
;
3251 struct be_rx_obj
*rxo
;
3252 struct be_tx_obj
*txo
;
3255 num_evts
= events_get(eqo
);
3257 for_all_tx_queues_on_eq(adapter
, eqo
, txo
, i
)
3258 be_process_tx(adapter
, txo
, i
);
3260 if (be_lock_napi(eqo
)) {
3261 /* This loop will iterate twice for EQ0 in which
3262 * completions of the last RXQ (default one) are also processed
3263 * For other EQs the loop iterates only once
3265 for_all_rx_queues_on_eq(adapter
, eqo
, rxo
, i
) {
3266 work
= be_process_rx(rxo
, napi
, budget
, NAPI_POLLING
);
3267 max_work
= max(work
, max_work
);
3269 be_unlock_napi(eqo
);
3274 if (is_mcc_eqo(eqo
))
3275 be_process_mcc(adapter
);
3277 if (max_work
< budget
) {
3278 napi_complete(napi
);
3280 /* Skyhawk EQ_DB has a provision to set the rearm to interrupt
3281 * delay via a delay multiplier encoding value
3283 if (skyhawk_chip(adapter
))
3284 mult_enc
= be_get_eq_delay_mult_enc(eqo
);
3286 be_eq_notify(adapter
, eqo
->q
.id
, true, false, num_evts
,
3289 /* As we'll continue in polling mode, count and clear events */
3290 be_eq_notify(adapter
, eqo
->q
.id
, false, false, num_evts
, 0);
3295 #ifdef CONFIG_NET_RX_BUSY_POLL
3296 static int be_busy_poll(struct napi_struct
*napi
)
3298 struct be_eq_obj
*eqo
= container_of(napi
, struct be_eq_obj
, napi
);
3299 struct be_adapter
*adapter
= eqo
->adapter
;
3300 struct be_rx_obj
*rxo
;
3303 if (!be_lock_busy_poll(eqo
))
3304 return LL_FLUSH_BUSY
;
3306 for_all_rx_queues_on_eq(adapter
, eqo
, rxo
, i
) {
3307 work
= be_process_rx(rxo
, napi
, 4, BUSY_POLLING
);
3312 be_unlock_busy_poll(eqo
);
3317 void be_detect_error(struct be_adapter
*adapter
)
3319 u32 ue_lo
= 0, ue_hi
= 0, ue_lo_mask
= 0, ue_hi_mask
= 0;
3320 u32 sliport_status
= 0, sliport_err1
= 0, sliport_err2
= 0;
3322 struct device
*dev
= &adapter
->pdev
->dev
;
3324 if (be_check_error(adapter
, BE_ERROR_HW
))
3327 if (lancer_chip(adapter
)) {
3328 sliport_status
= ioread32(adapter
->db
+ SLIPORT_STATUS_OFFSET
);
3329 if (sliport_status
& SLIPORT_STATUS_ERR_MASK
) {
3330 be_set_error(adapter
, BE_ERROR_UE
);
3331 sliport_err1
= ioread32(adapter
->db
+
3332 SLIPORT_ERROR1_OFFSET
);
3333 sliport_err2
= ioread32(adapter
->db
+
3334 SLIPORT_ERROR2_OFFSET
);
3335 /* Do not log error messages if its a FW reset */
3336 if (sliport_err1
== SLIPORT_ERROR_FW_RESET1
&&
3337 sliport_err2
== SLIPORT_ERROR_FW_RESET2
) {
3338 dev_info(dev
, "Firmware update in progress\n");
3340 dev_err(dev
, "Error detected in the card\n");
3341 dev_err(dev
, "ERR: sliport status 0x%x\n",
3343 dev_err(dev
, "ERR: sliport error1 0x%x\n",
3345 dev_err(dev
, "ERR: sliport error2 0x%x\n",
3350 ue_lo
= ioread32(adapter
->pcicfg
+ PCICFG_UE_STATUS_LOW
);
3351 ue_hi
= ioread32(adapter
->pcicfg
+ PCICFG_UE_STATUS_HIGH
);
3352 ue_lo_mask
= ioread32(adapter
->pcicfg
+
3353 PCICFG_UE_STATUS_LOW_MASK
);
3354 ue_hi_mask
= ioread32(adapter
->pcicfg
+
3355 PCICFG_UE_STATUS_HI_MASK
);
3357 ue_lo
= (ue_lo
& ~ue_lo_mask
);
3358 ue_hi
= (ue_hi
& ~ue_hi_mask
);
3360 /* On certain platforms BE hardware can indicate spurious UEs.
3361 * Allow HW to stop working completely in case of a real UE.
3362 * Hence not setting the hw_error for UE detection.
3365 if (ue_lo
|| ue_hi
) {
3366 dev_err(dev
, "Error detected in the adapter");
3367 if (skyhawk_chip(adapter
))
3368 be_set_error(adapter
, BE_ERROR_UE
);
3370 for (i
= 0; ue_lo
; ue_lo
>>= 1, i
++) {
3372 dev_err(dev
, "UE: %s bit set\n",
3373 ue_status_low_desc
[i
]);
3375 for (i
= 0; ue_hi
; ue_hi
>>= 1, i
++) {
3377 dev_err(dev
, "UE: %s bit set\n",
3378 ue_status_hi_desc
[i
]);
3384 static void be_msix_disable(struct be_adapter
*adapter
)
3386 if (msix_enabled(adapter
)) {
3387 pci_disable_msix(adapter
->pdev
);
3388 adapter
->num_msix_vec
= 0;
3389 adapter
->num_msix_roce_vec
= 0;
3393 static int be_msix_enable(struct be_adapter
*adapter
)
3395 unsigned int i
, max_roce_eqs
;
3396 struct device
*dev
= &adapter
->pdev
->dev
;
3399 /* If RoCE is supported, program the max number of vectors that
3400 * could be used for NIC and RoCE, else, just program the number
3401 * we'll use initially.
3403 if (be_roce_supported(adapter
)) {
3405 be_max_func_eqs(adapter
) - be_max_nic_eqs(adapter
);
3406 max_roce_eqs
= min(max_roce_eqs
, num_online_cpus());
3407 num_vec
= be_max_any_irqs(adapter
) + max_roce_eqs
;
3409 num_vec
= max(adapter
->cfg_num_rx_irqs
,
3410 adapter
->cfg_num_tx_irqs
);
3413 for (i
= 0; i
< num_vec
; i
++)
3414 adapter
->msix_entries
[i
].entry
= i
;
3416 num_vec
= pci_enable_msix_range(adapter
->pdev
, adapter
->msix_entries
,
3417 MIN_MSIX_VECTORS
, num_vec
);
3421 if (be_roce_supported(adapter
) && num_vec
> MIN_MSIX_VECTORS
) {
3422 adapter
->num_msix_roce_vec
= num_vec
/ 2;
3423 dev_info(dev
, "enabled %d MSI-x vector(s) for RoCE\n",
3424 adapter
->num_msix_roce_vec
);
3427 adapter
->num_msix_vec
= num_vec
- adapter
->num_msix_roce_vec
;
3429 dev_info(dev
, "enabled %d MSI-x vector(s) for NIC\n",
3430 adapter
->num_msix_vec
);
3434 dev_warn(dev
, "MSIx enable failed\n");
3436 /* INTx is not supported in VFs, so fail probe if enable_msix fails */
3437 if (be_virtfn(adapter
))
3442 static inline int be_msix_vec_get(struct be_adapter
*adapter
,
3443 struct be_eq_obj
*eqo
)
3445 return adapter
->msix_entries
[eqo
->msix_idx
].vector
;
3448 static int be_msix_register(struct be_adapter
*adapter
)
3450 struct net_device
*netdev
= adapter
->netdev
;
3451 struct be_eq_obj
*eqo
;
3454 for_all_evt_queues(adapter
, eqo
, i
) {
3455 sprintf(eqo
->desc
, "%s-q%d", netdev
->name
, i
);
3456 vec
= be_msix_vec_get(adapter
, eqo
);
3457 status
= request_irq(vec
, be_msix
, 0, eqo
->desc
, eqo
);
3461 irq_set_affinity_hint(vec
, eqo
->affinity_mask
);
3466 for (i
--; i
>= 0; i
--) {
3467 eqo
= &adapter
->eq_obj
[i
];
3468 free_irq(be_msix_vec_get(adapter
, eqo
), eqo
);
3470 dev_warn(&adapter
->pdev
->dev
, "MSIX Request IRQ failed - err %d\n",
3472 be_msix_disable(adapter
);
3476 static int be_irq_register(struct be_adapter
*adapter
)
3478 struct net_device
*netdev
= adapter
->netdev
;
3481 if (msix_enabled(adapter
)) {
3482 status
= be_msix_register(adapter
);
3485 /* INTx is not supported for VF */
3486 if (be_virtfn(adapter
))
3490 /* INTx: only the first EQ is used */
3491 netdev
->irq
= adapter
->pdev
->irq
;
3492 status
= request_irq(netdev
->irq
, be_intx
, IRQF_SHARED
, netdev
->name
,
3493 &adapter
->eq_obj
[0]);
3495 dev_err(&adapter
->pdev
->dev
,
3496 "INTx request IRQ failed - err %d\n", status
);
3500 adapter
->isr_registered
= true;
3504 static void be_irq_unregister(struct be_adapter
*adapter
)
3506 struct net_device
*netdev
= adapter
->netdev
;
3507 struct be_eq_obj
*eqo
;
3510 if (!adapter
->isr_registered
)
3514 if (!msix_enabled(adapter
)) {
3515 free_irq(netdev
->irq
, &adapter
->eq_obj
[0]);
3520 for_all_evt_queues(adapter
, eqo
, i
) {
3521 vec
= be_msix_vec_get(adapter
, eqo
);
3522 irq_set_affinity_hint(vec
, NULL
);
3527 adapter
->isr_registered
= false;
3530 static void be_rx_qs_destroy(struct be_adapter
*adapter
)
3532 struct rss_info
*rss
= &adapter
->rss_info
;
3533 struct be_queue_info
*q
;
3534 struct be_rx_obj
*rxo
;
3537 for_all_rx_queues(adapter
, rxo
, i
) {
3540 /* If RXQs are destroyed while in an "out of buffer"
3541 * state, there is a possibility of an HW stall on
3542 * Lancer. So, post 64 buffers to each queue to relieve
3543 * the "out of buffer" condition.
3544 * Make sure there's space in the RXQ before posting.
3546 if (lancer_chip(adapter
)) {
3547 be_rx_cq_clean(rxo
);
3548 if (atomic_read(&q
->used
) == 0)
3549 be_post_rx_frags(rxo
, GFP_KERNEL
,
3553 be_cmd_rxq_destroy(adapter
, q
);
3554 be_rx_cq_clean(rxo
);
3557 be_queue_free(adapter
, q
);
3560 if (rss
->rss_flags
) {
3561 rss
->rss_flags
= RSS_ENABLE_NONE
;
3562 be_cmd_rss_config(adapter
, rss
->rsstable
, rss
->rss_flags
,
3563 128, rss
->rss_hkey
);
3567 static void be_disable_if_filters(struct be_adapter
*adapter
)
3569 be_cmd_pmac_del(adapter
, adapter
->if_handle
,
3570 adapter
->pmac_id
[0], 0);
3572 be_clear_uc_list(adapter
);
3573 be_clear_mc_list(adapter
);
3575 /* The IFACE flags are enabled in the open path and cleared
3576 * in the close path. When a VF gets detached from the host and
3577 * assigned to a VM the following happens:
3578 * - VF's IFACE flags get cleared in the detach path
3579 * - IFACE create is issued by the VF in the attach path
3580 * Due to a bug in the BE3/Skyhawk-R FW
3581 * (Lancer FW doesn't have the bug), the IFACE capability flags
3582 * specified along with the IFACE create cmd issued by a VF are not
3583 * honoured by FW. As a consequence, if a *new* driver
3584 * (that enables/disables IFACE flags in open/close)
3585 * is loaded in the host and an *old* driver is * used by a VM/VF,
3586 * the IFACE gets created *without* the needed flags.
3587 * To avoid this, disable RX-filter flags only for Lancer.
3589 if (lancer_chip(adapter
)) {
3590 be_cmd_rx_filter(adapter
, BE_IF_ALL_FILT_FLAGS
, OFF
);
3591 adapter
->if_flags
&= ~BE_IF_ALL_FILT_FLAGS
;
3595 static int be_close(struct net_device
*netdev
)
3597 struct be_adapter
*adapter
= netdev_priv(netdev
);
3598 struct be_eq_obj
*eqo
;
3601 /* This protection is needed as be_close() may be called even when the
3602 * adapter is in cleared state (after eeh perm failure)
3604 if (!(adapter
->flags
& BE_FLAGS_SETUP_DONE
))
3607 /* Before attempting cleanup ensure all the pending cmds in the
3608 * config_wq have finished execution
3610 flush_workqueue(be_wq
);
3612 be_disable_if_filters(adapter
);
3614 if (adapter
->flags
& BE_FLAGS_NAPI_ENABLED
) {
3615 for_all_evt_queues(adapter
, eqo
, i
) {
3616 napi_disable(&eqo
->napi
);
3617 be_disable_busy_poll(eqo
);
3619 adapter
->flags
&= ~BE_FLAGS_NAPI_ENABLED
;
3622 be_async_mcc_disable(adapter
);
3624 /* Wait for all pending tx completions to arrive so that
3625 * all tx skbs are freed.
3627 netif_tx_disable(netdev
);
3628 be_tx_compl_clean(adapter
);
3630 be_rx_qs_destroy(adapter
);
3632 for_all_evt_queues(adapter
, eqo
, i
) {
3633 if (msix_enabled(adapter
))
3634 synchronize_irq(be_msix_vec_get(adapter
, eqo
));
3636 synchronize_irq(netdev
->irq
);
3640 be_irq_unregister(adapter
);
3645 static int be_rx_qs_create(struct be_adapter
*adapter
)
3647 struct rss_info
*rss
= &adapter
->rss_info
;
3648 u8 rss_key
[RSS_HASH_KEY_LEN
];
3649 struct be_rx_obj
*rxo
;
3652 for_all_rx_queues(adapter
, rxo
, i
) {
3653 rc
= be_queue_alloc(adapter
, &rxo
->q
, RX_Q_LEN
,
3654 sizeof(struct be_eth_rx_d
));
3659 if (adapter
->need_def_rxq
|| !adapter
->num_rss_qs
) {
3660 rxo
= default_rxo(adapter
);
3661 rc
= be_cmd_rxq_create(adapter
, &rxo
->q
, rxo
->cq
.id
,
3662 rx_frag_size
, adapter
->if_handle
,
3663 false, &rxo
->rss_id
);
3668 for_all_rss_queues(adapter
, rxo
, i
) {
3669 rc
= be_cmd_rxq_create(adapter
, &rxo
->q
, rxo
->cq
.id
,
3670 rx_frag_size
, adapter
->if_handle
,
3671 true, &rxo
->rss_id
);
3676 if (be_multi_rxq(adapter
)) {
3677 for (j
= 0; j
< RSS_INDIR_TABLE_LEN
; j
+= adapter
->num_rss_qs
) {
3678 for_all_rss_queues(adapter
, rxo
, i
) {
3679 if ((j
+ i
) >= RSS_INDIR_TABLE_LEN
)
3681 rss
->rsstable
[j
+ i
] = rxo
->rss_id
;
3682 rss
->rss_queue
[j
+ i
] = i
;
3685 rss
->rss_flags
= RSS_ENABLE_TCP_IPV4
| RSS_ENABLE_IPV4
|
3686 RSS_ENABLE_TCP_IPV6
| RSS_ENABLE_IPV6
;
3688 if (!BEx_chip(adapter
))
3689 rss
->rss_flags
|= RSS_ENABLE_UDP_IPV4
|
3690 RSS_ENABLE_UDP_IPV6
;
3692 netdev_rss_key_fill(rss_key
, RSS_HASH_KEY_LEN
);
3693 rc
= be_cmd_rss_config(adapter
, rss
->rsstable
, rss
->rss_flags
,
3694 RSS_INDIR_TABLE_LEN
, rss_key
);
3696 rss
->rss_flags
= RSS_ENABLE_NONE
;
3700 memcpy(rss
->rss_hkey
, rss_key
, RSS_HASH_KEY_LEN
);
3702 /* Disable RSS, if only default RX Q is created */
3703 rss
->rss_flags
= RSS_ENABLE_NONE
;
3707 /* Post 1 less than RXQ-len to avoid head being equal to tail,
3708 * which is a queue empty condition
3710 for_all_rx_queues(adapter
, rxo
, i
)
3711 be_post_rx_frags(rxo
, GFP_KERNEL
, RX_Q_LEN
- 1);
3716 static int be_enable_if_filters(struct be_adapter
*adapter
)
3720 status
= be_cmd_rx_filter(adapter
, BE_IF_FILT_FLAGS_BASIC
, ON
);
3724 /* For BE3 VFs, the PF programs the initial MAC address */
3725 if (!(BEx_chip(adapter
) && be_virtfn(adapter
))) {
3726 status
= be_cmd_pmac_add(adapter
, adapter
->netdev
->dev_addr
,
3728 &adapter
->pmac_id
[0], 0);
3733 if (adapter
->vlans_added
)
3734 be_vid_config(adapter
);
3736 __be_set_rx_mode(adapter
);
3741 static int be_open(struct net_device
*netdev
)
3743 struct be_adapter
*adapter
= netdev_priv(netdev
);
3744 struct be_eq_obj
*eqo
;
3745 struct be_rx_obj
*rxo
;
3746 struct be_tx_obj
*txo
;
3750 status
= be_rx_qs_create(adapter
);
3754 status
= be_enable_if_filters(adapter
);
3758 status
= be_irq_register(adapter
);
3762 for_all_rx_queues(adapter
, rxo
, i
)
3763 be_cq_notify(adapter
, rxo
->cq
.id
, true, 0);
3765 for_all_tx_queues(adapter
, txo
, i
)
3766 be_cq_notify(adapter
, txo
->cq
.id
, true, 0);
3768 be_async_mcc_enable(adapter
);
3770 for_all_evt_queues(adapter
, eqo
, i
) {
3771 napi_enable(&eqo
->napi
);
3772 be_enable_busy_poll(eqo
);
3773 be_eq_notify(adapter
, eqo
->q
.id
, true, true, 0, 0);
3775 adapter
->flags
|= BE_FLAGS_NAPI_ENABLED
;
3777 status
= be_cmd_link_status_query(adapter
, NULL
, &link_status
, 0);
3779 be_link_status_update(adapter
, link_status
);
3781 netif_tx_start_all_queues(netdev
);
3782 if (skyhawk_chip(adapter
))
3783 udp_tunnel_get_rx_info(netdev
);
3787 be_close(adapter
->netdev
);
3791 static void be_vf_eth_addr_generate(struct be_adapter
*adapter
, u8
*mac
)
3795 addr
= jhash(adapter
->netdev
->dev_addr
, ETH_ALEN
, 0);
3797 mac
[5] = (u8
)(addr
& 0xFF);
3798 mac
[4] = (u8
)((addr
>> 8) & 0xFF);
3799 mac
[3] = (u8
)((addr
>> 16) & 0xFF);
3800 /* Use the OUI from the current MAC address */
3801 memcpy(mac
, adapter
->netdev
->dev_addr
, 3);
3805 * Generate a seed MAC address from the PF MAC Address using jhash.
3806 * MAC Address for VFs are assigned incrementally starting from the seed.
3807 * These addresses are programmed in the ASIC by the PF and the VF driver
3808 * queries for the MAC address during its probe.
3810 static int be_vf_eth_addr_config(struct be_adapter
*adapter
)
3815 struct be_vf_cfg
*vf_cfg
;
3817 be_vf_eth_addr_generate(adapter
, mac
);
3819 for_all_vfs(adapter
, vf_cfg
, vf
) {
3820 if (BEx_chip(adapter
))
3821 status
= be_cmd_pmac_add(adapter
, mac
,
3823 &vf_cfg
->pmac_id
, vf
+ 1);
3825 status
= be_cmd_set_mac(adapter
, mac
, vf_cfg
->if_handle
,
3829 dev_err(&adapter
->pdev
->dev
,
3830 "Mac address assignment failed for VF %d\n",
3833 memcpy(vf_cfg
->mac_addr
, mac
, ETH_ALEN
);
3840 static int be_vfs_mac_query(struct be_adapter
*adapter
)
3844 struct be_vf_cfg
*vf_cfg
;
3846 for_all_vfs(adapter
, vf_cfg
, vf
) {
3847 status
= be_cmd_get_active_mac(adapter
, vf_cfg
->pmac_id
,
3848 mac
, vf_cfg
->if_handle
,
3852 memcpy(vf_cfg
->mac_addr
, mac
, ETH_ALEN
);
3857 static void be_vf_clear(struct be_adapter
*adapter
)
3859 struct be_vf_cfg
*vf_cfg
;
3862 if (pci_vfs_assigned(adapter
->pdev
)) {
3863 dev_warn(&adapter
->pdev
->dev
,
3864 "VFs are assigned to VMs: not disabling VFs\n");
3868 pci_disable_sriov(adapter
->pdev
);
3870 for_all_vfs(adapter
, vf_cfg
, vf
) {
3871 if (BEx_chip(adapter
))
3872 be_cmd_pmac_del(adapter
, vf_cfg
->if_handle
,
3873 vf_cfg
->pmac_id
, vf
+ 1);
3875 be_cmd_set_mac(adapter
, NULL
, vf_cfg
->if_handle
,
3878 be_cmd_if_destroy(adapter
, vf_cfg
->if_handle
, vf
+ 1);
3881 if (BE3_chip(adapter
))
3882 be_cmd_set_hsw_config(adapter
, 0, 0,
3884 PORT_FWD_TYPE_PASSTHRU
, 0);
3886 kfree(adapter
->vf_cfg
);
3887 adapter
->num_vfs
= 0;
3888 adapter
->flags
&= ~BE_FLAGS_SRIOV_ENABLED
;
3891 static void be_clear_queues(struct be_adapter
*adapter
)
3893 be_mcc_queues_destroy(adapter
);
3894 be_rx_cqs_destroy(adapter
);
3895 be_tx_queues_destroy(adapter
);
3896 be_evt_queues_destroy(adapter
);
3899 static void be_cancel_worker(struct be_adapter
*adapter
)
3901 if (adapter
->flags
& BE_FLAGS_WORKER_SCHEDULED
) {
3902 cancel_delayed_work_sync(&adapter
->work
);
3903 adapter
->flags
&= ~BE_FLAGS_WORKER_SCHEDULED
;
3907 static void be_cancel_err_detection(struct be_adapter
*adapter
)
3909 struct be_error_recovery
*err_rec
= &adapter
->error_recovery
;
3911 if (!be_err_recovery_workq
)
3914 if (adapter
->flags
& BE_FLAGS_ERR_DETECTION_SCHEDULED
) {
3915 cancel_delayed_work_sync(&err_rec
->err_detection_work
);
3916 adapter
->flags
&= ~BE_FLAGS_ERR_DETECTION_SCHEDULED
;
3920 static void be_disable_vxlan_offloads(struct be_adapter
*adapter
)
3922 struct net_device
*netdev
= adapter
->netdev
;
3924 if (adapter
->flags
& BE_FLAGS_VXLAN_OFFLOADS
)
3925 be_cmd_manage_iface(adapter
, adapter
->if_handle
,
3926 OP_CONVERT_TUNNEL_TO_NORMAL
);
3928 if (adapter
->vxlan_port
)
3929 be_cmd_set_vxlan_port(adapter
, 0);
3931 adapter
->flags
&= ~BE_FLAGS_VXLAN_OFFLOADS
;
3932 adapter
->vxlan_port
= 0;
3934 netdev
->hw_enc_features
= 0;
3935 netdev
->hw_features
&= ~(NETIF_F_GSO_UDP_TUNNEL
);
3936 netdev
->features
&= ~(NETIF_F_GSO_UDP_TUNNEL
);
3939 static void be_calculate_vf_res(struct be_adapter
*adapter
, u16 num_vfs
,
3940 struct be_resources
*vft_res
)
3942 struct be_resources res
= adapter
->pool_res
;
3943 u32 vf_if_cap_flags
= res
.vf_if_cap_flags
;
3944 struct be_resources res_mod
= {0};
3947 /* Distribute the queue resources among the PF and it's VFs */
3949 /* Divide the rx queues evenly among the VFs and the PF, capped
3950 * at VF-EQ-count. Any remainder queues belong to the PF.
3952 num_vf_qs
= min(SH_VF_MAX_NIC_EQS
,
3953 res
.max_rss_qs
/ (num_vfs
+ 1));
3955 /* Skyhawk-R chip supports only MAX_PORT_RSS_TABLES
3956 * RSS Tables per port. Provide RSS on VFs, only if number of
3957 * VFs requested is less than it's PF Pool's RSS Tables limit.
3959 if (num_vfs
>= be_max_pf_pool_rss_tables(adapter
))
3963 /* Resource with fields set to all '1's by GET_PROFILE_CONFIG cmd,
3964 * which are modifiable using SET_PROFILE_CONFIG cmd.
3966 be_cmd_get_profile_config(adapter
, &res_mod
, NULL
, ACTIVE_PROFILE_TYPE
,
3967 RESOURCE_MODIFIABLE
, 0);
3969 /* If RSS IFACE capability flags are modifiable for a VF, set the
3970 * capability flag as valid and set RSS and DEFQ_RSS IFACE flags if
3971 * more than 1 RSSQ is available for a VF.
3972 * Otherwise, provision only 1 queue pair for VF.
3974 if (res_mod
.vf_if_cap_flags
& BE_IF_FLAGS_RSS
) {
3975 vft_res
->flags
|= BIT(IF_CAPS_FLAGS_VALID_SHIFT
);
3976 if (num_vf_qs
> 1) {
3977 vf_if_cap_flags
|= BE_IF_FLAGS_RSS
;
3978 if (res
.if_cap_flags
& BE_IF_FLAGS_DEFQ_RSS
)
3979 vf_if_cap_flags
|= BE_IF_FLAGS_DEFQ_RSS
;
3981 vf_if_cap_flags
&= ~(BE_IF_FLAGS_RSS
|
3982 BE_IF_FLAGS_DEFQ_RSS
);
3988 if (res_mod
.vf_if_cap_flags
& BE_IF_FLAGS_VLAN_PROMISCUOUS
) {
3989 vft_res
->flags
|= BIT(IF_CAPS_FLAGS_VALID_SHIFT
);
3990 vf_if_cap_flags
&= ~BE_IF_FLAGS_VLAN_PROMISCUOUS
;
3993 vft_res
->vf_if_cap_flags
= vf_if_cap_flags
;
3994 vft_res
->max_rx_qs
= num_vf_qs
;
3995 vft_res
->max_rss_qs
= num_vf_qs
;
3996 vft_res
->max_tx_qs
= res
.max_tx_qs
/ (num_vfs
+ 1);
3997 vft_res
->max_cq_count
= res
.max_cq_count
/ (num_vfs
+ 1);
3999 /* Distribute unicast MACs, VLANs, IFACE count and MCCQ count equally
4000 * among the PF and it's VFs, if the fields are changeable
4002 if (res_mod
.max_uc_mac
== FIELD_MODIFIABLE
)
4003 vft_res
->max_uc_mac
= res
.max_uc_mac
/ (num_vfs
+ 1);
4005 if (res_mod
.max_vlans
== FIELD_MODIFIABLE
)
4006 vft_res
->max_vlans
= res
.max_vlans
/ (num_vfs
+ 1);
4008 if (res_mod
.max_iface_count
== FIELD_MODIFIABLE
)
4009 vft_res
->max_iface_count
= res
.max_iface_count
/ (num_vfs
+ 1);
4011 if (res_mod
.max_mcc_count
== FIELD_MODIFIABLE
)
4012 vft_res
->max_mcc_count
= res
.max_mcc_count
/ (num_vfs
+ 1);
4015 static void be_if_destroy(struct be_adapter
*adapter
)
4017 be_cmd_if_destroy(adapter
, adapter
->if_handle
, 0);
4019 kfree(adapter
->pmac_id
);
4020 adapter
->pmac_id
= NULL
;
4022 kfree(adapter
->mc_list
);
4023 adapter
->mc_list
= NULL
;
4025 kfree(adapter
->uc_list
);
4026 adapter
->uc_list
= NULL
;
4029 static int be_clear(struct be_adapter
*adapter
)
4031 struct pci_dev
*pdev
= adapter
->pdev
;
4032 struct be_resources vft_res
= {0};
4034 be_cancel_worker(adapter
);
4036 flush_workqueue(be_wq
);
4038 if (sriov_enabled(adapter
))
4039 be_vf_clear(adapter
);
4041 /* Re-configure FW to distribute resources evenly across max-supported
4042 * number of VFs, only when VFs are not already enabled.
4044 if (skyhawk_chip(adapter
) && be_physfn(adapter
) &&
4045 !pci_vfs_assigned(pdev
)) {
4046 be_calculate_vf_res(adapter
,
4047 pci_sriov_get_totalvfs(pdev
),
4049 be_cmd_set_sriov_config(adapter
, adapter
->pool_res
,
4050 pci_sriov_get_totalvfs(pdev
),
4054 be_disable_vxlan_offloads(adapter
);
4056 be_if_destroy(adapter
);
4058 be_clear_queues(adapter
);
4060 be_msix_disable(adapter
);
4061 adapter
->flags
&= ~BE_FLAGS_SETUP_DONE
;
4065 static int be_vfs_if_create(struct be_adapter
*adapter
)
4067 struct be_resources res
= {0};
4068 u32 cap_flags
, en_flags
, vf
;
4069 struct be_vf_cfg
*vf_cfg
;
4072 /* If a FW profile exists, then cap_flags are updated */
4073 cap_flags
= BE_VF_IF_EN_FLAGS
;
4075 for_all_vfs(adapter
, vf_cfg
, vf
) {
4076 if (!BE3_chip(adapter
)) {
4077 status
= be_cmd_get_profile_config(adapter
, &res
, NULL
,
4078 ACTIVE_PROFILE_TYPE
,
4082 cap_flags
= res
.if_cap_flags
;
4083 /* Prevent VFs from enabling VLAN promiscuous
4086 cap_flags
&= ~BE_IF_FLAGS_VLAN_PROMISCUOUS
;
4090 /* PF should enable IF flags during proxy if_create call */
4091 en_flags
= cap_flags
& BE_VF_IF_EN_FLAGS
;
4092 status
= be_cmd_if_create(adapter
, cap_flags
, en_flags
,
4093 &vf_cfg
->if_handle
, vf
+ 1);
4101 static int be_vf_setup_init(struct be_adapter
*adapter
)
4103 struct be_vf_cfg
*vf_cfg
;
4106 adapter
->vf_cfg
= kcalloc(adapter
->num_vfs
, sizeof(*vf_cfg
),
4108 if (!adapter
->vf_cfg
)
4111 for_all_vfs(adapter
, vf_cfg
, vf
) {
4112 vf_cfg
->if_handle
= -1;
4113 vf_cfg
->pmac_id
= -1;
4118 static int be_vf_setup(struct be_adapter
*adapter
)
4120 struct device
*dev
= &adapter
->pdev
->dev
;
4121 struct be_vf_cfg
*vf_cfg
;
4122 int status
, old_vfs
, vf
;
4125 old_vfs
= pci_num_vf(adapter
->pdev
);
4127 status
= be_vf_setup_init(adapter
);
4132 for_all_vfs(adapter
, vf_cfg
, vf
) {
4133 status
= be_cmd_get_if_id(adapter
, vf_cfg
, vf
);
4138 status
= be_vfs_mac_query(adapter
);
4142 status
= be_vfs_if_create(adapter
);
4146 status
= be_vf_eth_addr_config(adapter
);
4151 for_all_vfs(adapter
, vf_cfg
, vf
) {
4152 /* Allow VFs to programs MAC/VLAN filters */
4153 status
= be_cmd_get_fn_privileges(adapter
, &vf_cfg
->privileges
,
4155 if (!status
&& !(vf_cfg
->privileges
& BE_PRIV_FILTMGMT
)) {
4156 status
= be_cmd_set_fn_privileges(adapter
,
4157 vf_cfg
->privileges
|
4161 vf_cfg
->privileges
|= BE_PRIV_FILTMGMT
;
4162 dev_info(dev
, "VF%d has FILTMGMT privilege\n",
4167 /* Allow full available bandwidth */
4169 be_cmd_config_qos(adapter
, 0, 0, vf
+ 1);
4171 status
= be_cmd_get_hsw_config(adapter
, NULL
, vf
+ 1,
4172 vf_cfg
->if_handle
, NULL
,
4175 vf_cfg
->spoofchk
= spoofchk
;
4178 be_cmd_enable_vf(adapter
, vf
+ 1);
4179 be_cmd_set_logical_link_config(adapter
,
4180 IFLA_VF_LINK_STATE_AUTO
,
4186 status
= pci_enable_sriov(adapter
->pdev
, adapter
->num_vfs
);
4188 dev_err(dev
, "SRIOV enable failed\n");
4189 adapter
->num_vfs
= 0;
4194 if (BE3_chip(adapter
)) {
4195 /* On BE3, enable VEB only when SRIOV is enabled */
4196 status
= be_cmd_set_hsw_config(adapter
, 0, 0,
4198 PORT_FWD_TYPE_VEB
, 0);
4203 adapter
->flags
|= BE_FLAGS_SRIOV_ENABLED
;
4206 dev_err(dev
, "VF setup failed\n");
4207 be_vf_clear(adapter
);
4211 /* Converting function_mode bits on BE3 to SH mc_type enums */
4213 static u8
be_convert_mc_type(u32 function_mode
)
4215 if (function_mode
& VNIC_MODE
&& function_mode
& QNQ_MODE
)
4217 else if (function_mode
& QNQ_MODE
)
4219 else if (function_mode
& VNIC_MODE
)
4221 else if (function_mode
& UMC_ENABLED
)
4227 /* On BE2/BE3 FW does not suggest the supported limits */
4228 static void BEx_get_resources(struct be_adapter
*adapter
,
4229 struct be_resources
*res
)
4231 bool use_sriov
= adapter
->num_vfs
? 1 : 0;
4233 if (be_physfn(adapter
))
4234 res
->max_uc_mac
= BE_UC_PMAC_COUNT
;
4236 res
->max_uc_mac
= BE_VF_UC_PMAC_COUNT
;
4238 adapter
->mc_type
= be_convert_mc_type(adapter
->function_mode
);
4240 if (be_is_mc(adapter
)) {
4241 /* Assuming that there are 4 channels per port,
4242 * when multi-channel is enabled
4244 if (be_is_qnq_mode(adapter
))
4245 res
->max_vlans
= BE_NUM_VLANS_SUPPORTED
/8;
4247 /* In a non-qnq multichannel mode, the pvid
4248 * takes up one vlan entry
4250 res
->max_vlans
= (BE_NUM_VLANS_SUPPORTED
/ 4) - 1;
4252 res
->max_vlans
= BE_NUM_VLANS_SUPPORTED
;
4255 res
->max_mcast_mac
= BE_MAX_MC
;
4257 /* 1) For BE3 1Gb ports, FW does not support multiple TXQs
4258 * 2) Create multiple TX rings on a BE3-R multi-channel interface
4259 * *only* if it is RSS-capable.
4261 if (BE2_chip(adapter
) || use_sriov
|| (adapter
->port_num
> 1) ||
4262 be_virtfn(adapter
) ||
4263 (be_is_mc(adapter
) &&
4264 !(adapter
->function_caps
& BE_FUNCTION_CAPS_RSS
))) {
4266 } else if (adapter
->function_caps
& BE_FUNCTION_CAPS_SUPER_NIC
) {
4267 struct be_resources super_nic_res
= {0};
4269 /* On a SuperNIC profile, the driver needs to use the
4270 * GET_PROFILE_CONFIG cmd to query the per-function TXQ limits
4272 be_cmd_get_profile_config(adapter
, &super_nic_res
, NULL
,
4273 ACTIVE_PROFILE_TYPE
, RESOURCE_LIMITS
,
4275 /* Some old versions of BE3 FW don't report max_tx_qs value */
4276 res
->max_tx_qs
= super_nic_res
.max_tx_qs
? : BE3_MAX_TX_QS
;
4278 res
->max_tx_qs
= BE3_MAX_TX_QS
;
4281 if ((adapter
->function_caps
& BE_FUNCTION_CAPS_RSS
) &&
4282 !use_sriov
&& be_physfn(adapter
))
4283 res
->max_rss_qs
= (adapter
->be3_native
) ?
4284 BE3_MAX_RSS_QS
: BE2_MAX_RSS_QS
;
4285 res
->max_rx_qs
= res
->max_rss_qs
+ 1;
4287 if (be_physfn(adapter
))
4288 res
->max_evt_qs
= (be_max_vfs(adapter
) > 0) ?
4289 BE3_SRIOV_MAX_EVT_QS
: BE3_MAX_EVT_QS
;
4291 res
->max_evt_qs
= 1;
4293 res
->if_cap_flags
= BE_IF_CAP_FLAGS_WANT
;
4294 res
->if_cap_flags
&= ~BE_IF_FLAGS_DEFQ_RSS
;
4295 if (!(adapter
->function_caps
& BE_FUNCTION_CAPS_RSS
))
4296 res
->if_cap_flags
&= ~BE_IF_FLAGS_RSS
;
4299 static void be_setup_init(struct be_adapter
*adapter
)
4301 adapter
->vlan_prio_bmap
= 0xff;
4302 adapter
->phy
.link_speed
= -1;
4303 adapter
->if_handle
= -1;
4304 adapter
->be3_native
= false;
4305 adapter
->if_flags
= 0;
4306 adapter
->phy_state
= BE_UNKNOWN_PHY_STATE
;
4307 if (be_physfn(adapter
))
4308 adapter
->cmd_privileges
= MAX_PRIVILEGES
;
4310 adapter
->cmd_privileges
= MIN_PRIVILEGES
;
4313 /* HW supports only MAX_PORT_RSS_TABLES RSS Policy Tables per port.
4314 * However, this HW limitation is not exposed to the host via any SLI cmd.
4315 * As a result, in the case of SRIOV and in particular multi-partition configs
4316 * the driver needs to calcuate a proportional share of RSS Tables per PF-pool
4317 * for distribution between the VFs. This self-imposed limit will determine the
4318 * no: of VFs for which RSS can be enabled.
4320 void be_calculate_pf_pool_rss_tables(struct be_adapter
*adapter
)
4322 struct be_port_resources port_res
= {0};
4323 u8 rss_tables_on_port
;
4324 u16 max_vfs
= be_max_vfs(adapter
);
4326 be_cmd_get_profile_config(adapter
, NULL
, &port_res
, SAVED_PROFILE_TYPE
,
4327 RESOURCE_LIMITS
, 0);
4329 rss_tables_on_port
= MAX_PORT_RSS_TABLES
- port_res
.nic_pfs
;
4331 /* Each PF Pool's RSS Tables limit =
4332 * PF's Max VFs / Total_Max_VFs on Port * RSS Tables on Port
4334 adapter
->pool_res
.max_rss_tables
=
4335 max_vfs
* rss_tables_on_port
/ port_res
.max_vfs
;
4338 static int be_get_sriov_config(struct be_adapter
*adapter
)
4340 struct be_resources res
= {0};
4341 int max_vfs
, old_vfs
;
4343 be_cmd_get_profile_config(adapter
, &res
, NULL
, ACTIVE_PROFILE_TYPE
,
4344 RESOURCE_LIMITS
, 0);
4346 /* Some old versions of BE3 FW don't report max_vfs value */
4347 if (BE3_chip(adapter
) && !res
.max_vfs
) {
4348 max_vfs
= pci_sriov_get_totalvfs(adapter
->pdev
);
4349 res
.max_vfs
= max_vfs
> 0 ? min(MAX_VFS
, max_vfs
) : 0;
4352 adapter
->pool_res
= res
;
4354 /* If during previous unload of the driver, the VFs were not disabled,
4355 * then we cannot rely on the PF POOL limits for the TotalVFs value.
4356 * Instead use the TotalVFs value stored in the pci-dev struct.
4358 old_vfs
= pci_num_vf(adapter
->pdev
);
4360 dev_info(&adapter
->pdev
->dev
, "%d VFs are already enabled\n",
4363 adapter
->pool_res
.max_vfs
=
4364 pci_sriov_get_totalvfs(adapter
->pdev
);
4365 adapter
->num_vfs
= old_vfs
;
4368 if (skyhawk_chip(adapter
) && be_max_vfs(adapter
) && !old_vfs
) {
4369 be_calculate_pf_pool_rss_tables(adapter
);
4370 dev_info(&adapter
->pdev
->dev
,
4371 "RSS can be enabled for all VFs if num_vfs <= %d\n",
4372 be_max_pf_pool_rss_tables(adapter
));
4377 static void be_alloc_sriov_res(struct be_adapter
*adapter
)
4379 int old_vfs
= pci_num_vf(adapter
->pdev
);
4380 struct be_resources vft_res
= {0};
4383 be_get_sriov_config(adapter
);
4386 pci_sriov_set_totalvfs(adapter
->pdev
, be_max_vfs(adapter
));
4388 /* When the HW is in SRIOV capable configuration, the PF-pool
4389 * resources are given to PF during driver load, if there are no
4390 * old VFs. This facility is not available in BE3 FW.
4391 * Also, this is done by FW in Lancer chip.
4393 if (skyhawk_chip(adapter
) && be_max_vfs(adapter
) && !old_vfs
) {
4394 be_calculate_vf_res(adapter
, 0, &vft_res
);
4395 status
= be_cmd_set_sriov_config(adapter
, adapter
->pool_res
, 0,
4398 dev_err(&adapter
->pdev
->dev
,
4399 "Failed to optimize SRIOV resources\n");
4403 static int be_get_resources(struct be_adapter
*adapter
)
4405 struct device
*dev
= &adapter
->pdev
->dev
;
4406 struct be_resources res
= {0};
4409 /* For Lancer, SH etc read per-function resource limits from FW.
4410 * GET_FUNC_CONFIG returns per function guaranteed limits.
4411 * GET_PROFILE_CONFIG returns PCI-E related limits PF-pool limits
4413 if (BEx_chip(adapter
)) {
4414 BEx_get_resources(adapter
, &res
);
4416 status
= be_cmd_get_func_config(adapter
, &res
);
4420 /* If a deafault RXQ must be created, we'll use up one RSSQ*/
4421 if (res
.max_rss_qs
&& res
.max_rss_qs
== res
.max_rx_qs
&&
4422 !(res
.if_cap_flags
& BE_IF_FLAGS_DEFQ_RSS
))
4423 res
.max_rss_qs
-= 1;
4426 /* If RoCE is supported stash away half the EQs for RoCE */
4427 res
.max_nic_evt_qs
= be_roce_supported(adapter
) ?
4428 res
.max_evt_qs
/ 2 : res
.max_evt_qs
;
4431 /* If FW supports RSS default queue, then skip creating non-RSS
4432 * queue for non-IP traffic.
4434 adapter
->need_def_rxq
= (be_if_cap_flags(adapter
) &
4435 BE_IF_FLAGS_DEFQ_RSS
) ? 0 : 1;
4437 dev_info(dev
, "Max: txqs %d, rxqs %d, rss %d, eqs %d, vfs %d\n",
4438 be_max_txqs(adapter
), be_max_rxqs(adapter
),
4439 be_max_rss(adapter
), be_max_nic_eqs(adapter
),
4440 be_max_vfs(adapter
));
4441 dev_info(dev
, "Max: uc-macs %d, mc-macs %d, vlans %d\n",
4442 be_max_uc(adapter
), be_max_mc(adapter
),
4443 be_max_vlans(adapter
));
4445 /* Ensure RX and TX queues are created in pairs at init time */
4446 adapter
->cfg_num_rx_irqs
=
4447 min_t(u16
, netif_get_num_default_rss_queues(),
4448 be_max_qp_irqs(adapter
));
4449 adapter
->cfg_num_tx_irqs
= adapter
->cfg_num_rx_irqs
;
4453 static int be_get_config(struct be_adapter
*adapter
)
4458 status
= be_cmd_get_cntl_attributes(adapter
);
4462 status
= be_cmd_query_fw_cfg(adapter
);
4466 if (!lancer_chip(adapter
) && be_physfn(adapter
))
4467 be_cmd_get_fat_dump_len(adapter
, &adapter
->fat_dump_len
);
4469 if (BEx_chip(adapter
)) {
4470 level
= be_cmd_get_fw_log_level(adapter
);
4471 adapter
->msg_enable
=
4472 level
<= FW_LOG_LEVEL_DEFAULT
? NETIF_MSG_HW
: 0;
4475 be_cmd_get_acpi_wol_cap(adapter
);
4476 pci_enable_wake(adapter
->pdev
, PCI_D3hot
, adapter
->wol_en
);
4477 pci_enable_wake(adapter
->pdev
, PCI_D3cold
, adapter
->wol_en
);
4479 be_cmd_query_port_name(adapter
);
4481 if (be_physfn(adapter
)) {
4482 status
= be_cmd_get_active_profile(adapter
, &profile_id
);
4484 dev_info(&adapter
->pdev
->dev
,
4485 "Using profile 0x%x\n", profile_id
);
4491 static int be_mac_setup(struct be_adapter
*adapter
)
4496 if (is_zero_ether_addr(adapter
->netdev
->dev_addr
)) {
4497 status
= be_cmd_get_perm_mac(adapter
, mac
);
4501 memcpy(adapter
->netdev
->dev_addr
, mac
, ETH_ALEN
);
4502 memcpy(adapter
->netdev
->perm_addr
, mac
, ETH_ALEN
);
4508 static void be_schedule_worker(struct be_adapter
*adapter
)
4510 queue_delayed_work(be_wq
, &adapter
->work
, msecs_to_jiffies(1000));
4511 adapter
->flags
|= BE_FLAGS_WORKER_SCHEDULED
;
4514 static void be_destroy_err_recovery_workq(void)
4516 if (!be_err_recovery_workq
)
4519 flush_workqueue(be_err_recovery_workq
);
4520 destroy_workqueue(be_err_recovery_workq
);
4521 be_err_recovery_workq
= NULL
;
4524 static void be_schedule_err_detection(struct be_adapter
*adapter
, u32 delay
)
4526 struct be_error_recovery
*err_rec
= &adapter
->error_recovery
;
4528 if (!be_err_recovery_workq
)
4531 queue_delayed_work(be_err_recovery_workq
, &err_rec
->err_detection_work
,
4532 msecs_to_jiffies(delay
));
4533 adapter
->flags
|= BE_FLAGS_ERR_DETECTION_SCHEDULED
;
4536 static int be_setup_queues(struct be_adapter
*adapter
)
4538 struct net_device
*netdev
= adapter
->netdev
;
4541 status
= be_evt_queues_create(adapter
);
4545 status
= be_tx_qs_create(adapter
);
4549 status
= be_rx_cqs_create(adapter
);
4553 status
= be_mcc_queues_create(adapter
);
4557 status
= netif_set_real_num_rx_queues(netdev
, adapter
->num_rx_qs
);
4561 status
= netif_set_real_num_tx_queues(netdev
, adapter
->num_tx_qs
);
4567 dev_err(&adapter
->pdev
->dev
, "queue_setup failed\n");
4571 static int be_if_create(struct be_adapter
*adapter
)
4573 u32 en_flags
= BE_IF_FLAGS_RSS
| BE_IF_FLAGS_DEFQ_RSS
;
4574 u32 cap_flags
= be_if_cap_flags(adapter
);
4577 /* alloc required memory for other filtering fields */
4578 adapter
->pmac_id
= kcalloc(be_max_uc(adapter
),
4579 sizeof(*adapter
->pmac_id
), GFP_KERNEL
);
4580 if (!adapter
->pmac_id
)
4583 adapter
->mc_list
= kcalloc(be_max_mc(adapter
),
4584 sizeof(*adapter
->mc_list
), GFP_KERNEL
);
4585 if (!adapter
->mc_list
)
4588 adapter
->uc_list
= kcalloc(be_max_uc(adapter
),
4589 sizeof(*adapter
->uc_list
), GFP_KERNEL
);
4590 if (!adapter
->uc_list
)
4593 if (adapter
->cfg_num_rx_irqs
== 1)
4594 cap_flags
&= ~(BE_IF_FLAGS_DEFQ_RSS
| BE_IF_FLAGS_RSS
);
4596 en_flags
&= cap_flags
;
4597 /* will enable all the needed filter flags in be_open() */
4598 status
= be_cmd_if_create(adapter
, be_if_cap_flags(adapter
), en_flags
,
4599 &adapter
->if_handle
, 0);
4607 int be_update_queues(struct be_adapter
*adapter
)
4609 struct net_device
*netdev
= adapter
->netdev
;
4612 if (netif_running(netdev
))
4615 be_cancel_worker(adapter
);
4617 /* If any vectors have been shared with RoCE we cannot re-program
4620 if (!adapter
->num_msix_roce_vec
)
4621 be_msix_disable(adapter
);
4623 be_clear_queues(adapter
);
4624 status
= be_cmd_if_destroy(adapter
, adapter
->if_handle
, 0);
4628 if (!msix_enabled(adapter
)) {
4629 status
= be_msix_enable(adapter
);
4634 status
= be_if_create(adapter
);
4638 status
= be_setup_queues(adapter
);
4642 be_schedule_worker(adapter
);
4644 if (netif_running(netdev
))
4645 status
= be_open(netdev
);
4650 static inline int fw_major_num(const char *fw_ver
)
4652 int fw_major
= 0, i
;
4654 i
= sscanf(fw_ver
, "%d.", &fw_major
);
4661 /* If it is error recovery, FLR the PF
4662 * Else if any VFs are already enabled don't FLR the PF
4664 static bool be_reset_required(struct be_adapter
*adapter
)
4666 if (be_error_recovering(adapter
))
4669 return pci_num_vf(adapter
->pdev
) == 0;
4672 /* Wait for the FW to be ready and perform the required initialization */
4673 static int be_func_init(struct be_adapter
*adapter
)
4677 status
= be_fw_wait_ready(adapter
);
4681 /* FW is now ready; clear errors to allow cmds/doorbell */
4682 be_clear_error(adapter
, BE_CLEAR_ALL
);
4684 if (be_reset_required(adapter
)) {
4685 status
= be_cmd_reset_function(adapter
);
4689 /* Wait for interrupts to quiesce after an FLR */
4693 /* Tell FW we're ready to fire cmds */
4694 status
= be_cmd_fw_init(adapter
);
4698 /* Allow interrupts for other ULPs running on NIC function */
4699 be_intr_set(adapter
, true);
4704 static int be_setup(struct be_adapter
*adapter
)
4706 struct device
*dev
= &adapter
->pdev
->dev
;
4709 status
= be_func_init(adapter
);
4713 be_setup_init(adapter
);
4715 if (!lancer_chip(adapter
))
4716 be_cmd_req_native_mode(adapter
);
4718 /* invoke this cmd first to get pf_num and vf_num which are needed
4719 * for issuing profile related cmds
4721 if (!BEx_chip(adapter
)) {
4722 status
= be_cmd_get_func_config(adapter
, NULL
);
4727 status
= be_get_config(adapter
);
4731 if (!BE2_chip(adapter
) && be_physfn(adapter
))
4732 be_alloc_sriov_res(adapter
);
4734 status
= be_get_resources(adapter
);
4738 status
= be_msix_enable(adapter
);
4742 /* will enable all the needed filter flags in be_open() */
4743 status
= be_if_create(adapter
);
4747 /* Updating real_num_tx/rx_queues() requires rtnl_lock() */
4749 status
= be_setup_queues(adapter
);
4754 be_cmd_get_fn_privileges(adapter
, &adapter
->cmd_privileges
, 0);
4756 status
= be_mac_setup(adapter
);
4760 be_cmd_get_fw_ver(adapter
);
4761 dev_info(dev
, "FW version is %s\n", adapter
->fw_ver
);
4763 if (BE2_chip(adapter
) && fw_major_num(adapter
->fw_ver
) < 4) {
4764 dev_err(dev
, "Firmware on card is old(%s), IRQs may not work",
4766 dev_err(dev
, "Please upgrade firmware to version >= 4.0\n");
4769 status
= be_cmd_set_flow_control(adapter
, adapter
->tx_fc
,
4772 be_cmd_get_flow_control(adapter
, &adapter
->tx_fc
,
4775 dev_info(&adapter
->pdev
->dev
, "HW Flow control - TX:%d RX:%d\n",
4776 adapter
->tx_fc
, adapter
->rx_fc
);
4778 if (be_physfn(adapter
))
4779 be_cmd_set_logical_link_config(adapter
,
4780 IFLA_VF_LINK_STATE_AUTO
, 0);
4782 /* BE3 EVB echoes broadcast/multicast packets back to PF's vport
4783 * confusing a linux bridge or OVS that it might be connected to.
4784 * Set the EVB to PASSTHRU mode which effectively disables the EVB
4785 * when SRIOV is not enabled.
4787 if (BE3_chip(adapter
))
4788 be_cmd_set_hsw_config(adapter
, 0, 0, adapter
->if_handle
,
4789 PORT_FWD_TYPE_PASSTHRU
, 0);
4791 if (adapter
->num_vfs
)
4792 be_vf_setup(adapter
);
4794 status
= be_cmd_get_phy_info(adapter
);
4795 if (!status
&& be_pause_supported(adapter
))
4796 adapter
->phy
.fc_autoneg
= 1;
4798 if (be_physfn(adapter
) && !lancer_chip(adapter
))
4799 be_cmd_set_features(adapter
);
4801 be_schedule_worker(adapter
);
4802 adapter
->flags
|= BE_FLAGS_SETUP_DONE
;
4809 #ifdef CONFIG_NET_POLL_CONTROLLER
4810 static void be_netpoll(struct net_device
*netdev
)
4812 struct be_adapter
*adapter
= netdev_priv(netdev
);
4813 struct be_eq_obj
*eqo
;
4816 for_all_evt_queues(adapter
, eqo
, i
) {
4817 be_eq_notify(eqo
->adapter
, eqo
->q
.id
, false, true, 0, 0);
4818 napi_schedule(&eqo
->napi
);
4823 int be_load_fw(struct be_adapter
*adapter
, u8
*fw_file
)
4825 const struct firmware
*fw
;
4828 if (!netif_running(adapter
->netdev
)) {
4829 dev_err(&adapter
->pdev
->dev
,
4830 "Firmware load not allowed (interface is down)\n");
4834 status
= request_firmware(&fw
, fw_file
, &adapter
->pdev
->dev
);
4838 dev_info(&adapter
->pdev
->dev
, "Flashing firmware file %s\n", fw_file
);
4840 if (lancer_chip(adapter
))
4841 status
= lancer_fw_download(adapter
, fw
);
4843 status
= be_fw_download(adapter
, fw
);
4846 be_cmd_get_fw_ver(adapter
);
4849 release_firmware(fw
);
4853 static int be_ndo_bridge_setlink(struct net_device
*dev
, struct nlmsghdr
*nlh
,
4856 struct be_adapter
*adapter
= netdev_priv(dev
);
4857 struct nlattr
*attr
, *br_spec
;
4862 if (!sriov_enabled(adapter
))
4865 br_spec
= nlmsg_find_attr(nlh
, sizeof(struct ifinfomsg
), IFLA_AF_SPEC
);
4869 nla_for_each_nested(attr
, br_spec
, rem
) {
4870 if (nla_type(attr
) != IFLA_BRIDGE_MODE
)
4873 if (nla_len(attr
) < sizeof(mode
))
4876 mode
= nla_get_u16(attr
);
4877 if (BE3_chip(adapter
) && mode
== BRIDGE_MODE_VEPA
)
4880 if (mode
!= BRIDGE_MODE_VEPA
&& mode
!= BRIDGE_MODE_VEB
)
4883 status
= be_cmd_set_hsw_config(adapter
, 0, 0,
4885 mode
== BRIDGE_MODE_VEPA
?
4886 PORT_FWD_TYPE_VEPA
:
4887 PORT_FWD_TYPE_VEB
, 0);
4891 dev_info(&adapter
->pdev
->dev
, "enabled switch mode: %s\n",
4892 mode
== BRIDGE_MODE_VEPA
? "VEPA" : "VEB");
4897 dev_err(&adapter
->pdev
->dev
, "Failed to set switch mode %s\n",
4898 mode
== BRIDGE_MODE_VEPA
? "VEPA" : "VEB");
4903 static int be_ndo_bridge_getlink(struct sk_buff
*skb
, u32 pid
, u32 seq
,
4904 struct net_device
*dev
, u32 filter_mask
,
4907 struct be_adapter
*adapter
= netdev_priv(dev
);
4911 /* BE and Lancer chips support VEB mode only */
4912 if (BEx_chip(adapter
) || lancer_chip(adapter
)) {
4913 /* VEB is disabled in non-SR-IOV profiles on BE3/Lancer */
4914 if (!pci_sriov_get_totalvfs(adapter
->pdev
))
4916 hsw_mode
= PORT_FWD_TYPE_VEB
;
4918 status
= be_cmd_get_hsw_config(adapter
, NULL
, 0,
4919 adapter
->if_handle
, &hsw_mode
,
4924 if (hsw_mode
== PORT_FWD_TYPE_PASSTHRU
)
4928 return ndo_dflt_bridge_getlink(skb
, pid
, seq
, dev
,
4929 hsw_mode
== PORT_FWD_TYPE_VEPA
?
4930 BRIDGE_MODE_VEPA
: BRIDGE_MODE_VEB
,
4931 0, 0, nlflags
, filter_mask
, NULL
);
4934 static struct be_cmd_work
*be_alloc_work(struct be_adapter
*adapter
,
4935 void (*func
)(struct work_struct
*))
4937 struct be_cmd_work
*work
;
4939 work
= kzalloc(sizeof(*work
), GFP_ATOMIC
);
4941 dev_err(&adapter
->pdev
->dev
,
4942 "be_work memory allocation failed\n");
4946 INIT_WORK(&work
->work
, func
);
4947 work
->adapter
= adapter
;
4951 /* VxLAN offload Notes:
4953 * The stack defines tunnel offload flags (hw_enc_features) for IP and doesn't
4954 * distinguish various types of transports (VxLAN, GRE, NVGRE ..). So, offload
4955 * is expected to work across all types of IP tunnels once exported. Skyhawk
4956 * supports offloads for either VxLAN or NVGRE, exclusively. So we export VxLAN
4957 * offloads in hw_enc_features only when a VxLAN port is added. If other (non
4958 * VxLAN) tunnels are configured while VxLAN offloads are enabled, offloads for
4959 * those other tunnels are unexported on the fly through ndo_features_check().
4961 * Skyhawk supports VxLAN offloads only for one UDP dport. So, if the stack
4962 * adds more than one port, disable offloads and don't re-enable them again
4963 * until after all the tunnels are removed.
4965 static void be_work_add_vxlan_port(struct work_struct
*work
)
4967 struct be_cmd_work
*cmd_work
=
4968 container_of(work
, struct be_cmd_work
, work
);
4969 struct be_adapter
*adapter
= cmd_work
->adapter
;
4970 struct net_device
*netdev
= adapter
->netdev
;
4971 struct device
*dev
= &adapter
->pdev
->dev
;
4972 __be16 port
= cmd_work
->info
.vxlan_port
;
4975 if (adapter
->vxlan_port
== port
&& adapter
->vxlan_port_count
) {
4976 adapter
->vxlan_port_aliases
++;
4980 if (adapter
->flags
& BE_FLAGS_VXLAN_OFFLOADS
) {
4982 "Only one UDP port supported for VxLAN offloads\n");
4983 dev_info(dev
, "Disabling VxLAN offloads\n");
4984 adapter
->vxlan_port_count
++;
4988 if (adapter
->vxlan_port_count
++ >= 1)
4991 status
= be_cmd_manage_iface(adapter
, adapter
->if_handle
,
4992 OP_CONVERT_NORMAL_TO_TUNNEL
);
4994 dev_warn(dev
, "Failed to convert normal interface to tunnel\n");
4998 status
= be_cmd_set_vxlan_port(adapter
, port
);
5000 dev_warn(dev
, "Failed to add VxLAN port\n");
5003 adapter
->flags
|= BE_FLAGS_VXLAN_OFFLOADS
;
5004 adapter
->vxlan_port
= port
;
5006 netdev
->hw_enc_features
|= NETIF_F_IP_CSUM
| NETIF_F_IPV6_CSUM
|
5007 NETIF_F_TSO
| NETIF_F_TSO6
|
5008 NETIF_F_GSO_UDP_TUNNEL
;
5009 netdev
->hw_features
|= NETIF_F_GSO_UDP_TUNNEL
;
5010 netdev
->features
|= NETIF_F_GSO_UDP_TUNNEL
;
5012 dev_info(dev
, "Enabled VxLAN offloads for UDP port %d\n",
5016 be_disable_vxlan_offloads(adapter
);
5021 static void be_work_del_vxlan_port(struct work_struct
*work
)
5023 struct be_cmd_work
*cmd_work
=
5024 container_of(work
, struct be_cmd_work
, work
);
5025 struct be_adapter
*adapter
= cmd_work
->adapter
;
5026 __be16 port
= cmd_work
->info
.vxlan_port
;
5028 if (adapter
->vxlan_port
!= port
)
5031 if (adapter
->vxlan_port_aliases
) {
5032 adapter
->vxlan_port_aliases
--;
5036 be_disable_vxlan_offloads(adapter
);
5038 dev_info(&adapter
->pdev
->dev
,
5039 "Disabled VxLAN offloads for UDP port %d\n",
5042 adapter
->vxlan_port_count
--;
5047 static void be_cfg_vxlan_port(struct net_device
*netdev
,
5048 struct udp_tunnel_info
*ti
,
5049 void (*func
)(struct work_struct
*))
5051 struct be_adapter
*adapter
= netdev_priv(netdev
);
5052 struct be_cmd_work
*cmd_work
;
5054 if (ti
->type
!= UDP_TUNNEL_TYPE_VXLAN
)
5057 if (lancer_chip(adapter
) || BEx_chip(adapter
) || be_is_mc(adapter
))
5060 cmd_work
= be_alloc_work(adapter
, func
);
5062 cmd_work
->info
.vxlan_port
= ti
->port
;
5063 queue_work(be_wq
, &cmd_work
->work
);
5067 static void be_del_vxlan_port(struct net_device
*netdev
,
5068 struct udp_tunnel_info
*ti
)
5070 be_cfg_vxlan_port(netdev
, ti
, be_work_del_vxlan_port
);
5073 static void be_add_vxlan_port(struct net_device
*netdev
,
5074 struct udp_tunnel_info
*ti
)
5076 be_cfg_vxlan_port(netdev
, ti
, be_work_add_vxlan_port
);
5079 static netdev_features_t
be_features_check(struct sk_buff
*skb
,
5080 struct net_device
*dev
,
5081 netdev_features_t features
)
5083 struct be_adapter
*adapter
= netdev_priv(dev
);
5086 /* The code below restricts offload features for some tunneled packets.
5087 * Offload features for normal (non tunnel) packets are unchanged.
5089 if (!skb
->encapsulation
||
5090 !(adapter
->flags
& BE_FLAGS_VXLAN_OFFLOADS
))
5093 /* It's an encapsulated packet and VxLAN offloads are enabled. We
5094 * should disable tunnel offload features if it's not a VxLAN packet,
5095 * as tunnel offloads have been enabled only for VxLAN. This is done to
5096 * allow other tunneled traffic like GRE work fine while VxLAN
5097 * offloads are configured in Skyhawk-R.
5099 switch (vlan_get_protocol(skb
)) {
5100 case htons(ETH_P_IP
):
5101 l4_hdr
= ip_hdr(skb
)->protocol
;
5103 case htons(ETH_P_IPV6
):
5104 l4_hdr
= ipv6_hdr(skb
)->nexthdr
;
5110 if (l4_hdr
!= IPPROTO_UDP
||
5111 skb
->inner_protocol_type
!= ENCAP_TYPE_ETHER
||
5112 skb
->inner_protocol
!= htons(ETH_P_TEB
) ||
5113 skb_inner_mac_header(skb
) - skb_transport_header(skb
) !=
5114 sizeof(struct udphdr
) + sizeof(struct vxlanhdr
))
5115 return features
& ~(NETIF_F_CSUM_MASK
| NETIF_F_GSO_MASK
);
5120 static int be_get_phys_port_id(struct net_device
*dev
,
5121 struct netdev_phys_item_id
*ppid
)
5123 int i
, id_len
= CNTL_SERIAL_NUM_WORDS
* CNTL_SERIAL_NUM_WORD_SZ
+ 1;
5124 struct be_adapter
*adapter
= netdev_priv(dev
);
5127 if (MAX_PHYS_ITEM_ID_LEN
< id_len
)
5130 ppid
->id
[0] = adapter
->hba_port_num
+ 1;
5132 for (i
= CNTL_SERIAL_NUM_WORDS
- 1; i
>= 0;
5133 i
--, id
+= CNTL_SERIAL_NUM_WORD_SZ
)
5134 memcpy(id
, &adapter
->serial_num
[i
], CNTL_SERIAL_NUM_WORD_SZ
);
5136 ppid
->id_len
= id_len
;
5141 static void be_set_rx_mode(struct net_device
*dev
)
5143 struct be_adapter
*adapter
= netdev_priv(dev
);
5144 struct be_cmd_work
*work
;
5146 work
= be_alloc_work(adapter
, be_work_set_rx_mode
);
5148 queue_work(be_wq
, &work
->work
);
5151 static const struct net_device_ops be_netdev_ops
= {
5152 .ndo_open
= be_open
,
5153 .ndo_stop
= be_close
,
5154 .ndo_start_xmit
= be_xmit
,
5155 .ndo_set_rx_mode
= be_set_rx_mode
,
5156 .ndo_set_mac_address
= be_mac_addr_set
,
5157 .ndo_change_mtu
= be_change_mtu
,
5158 .ndo_get_stats64
= be_get_stats64
,
5159 .ndo_validate_addr
= eth_validate_addr
,
5160 .ndo_vlan_rx_add_vid
= be_vlan_add_vid
,
5161 .ndo_vlan_rx_kill_vid
= be_vlan_rem_vid
,
5162 .ndo_set_vf_mac
= be_set_vf_mac
,
5163 .ndo_set_vf_vlan
= be_set_vf_vlan
,
5164 .ndo_set_vf_rate
= be_set_vf_tx_rate
,
5165 .ndo_get_vf_config
= be_get_vf_config
,
5166 .ndo_set_vf_link_state
= be_set_vf_link_state
,
5167 .ndo_set_vf_spoofchk
= be_set_vf_spoofchk
,
5168 #ifdef CONFIG_NET_POLL_CONTROLLER
5169 .ndo_poll_controller
= be_netpoll
,
5171 .ndo_bridge_setlink
= be_ndo_bridge_setlink
,
5172 .ndo_bridge_getlink
= be_ndo_bridge_getlink
,
5173 #ifdef CONFIG_NET_RX_BUSY_POLL
5174 .ndo_busy_poll
= be_busy_poll
,
5176 .ndo_udp_tunnel_add
= be_add_vxlan_port
,
5177 .ndo_udp_tunnel_del
= be_del_vxlan_port
,
5178 .ndo_features_check
= be_features_check
,
5179 .ndo_get_phys_port_id
= be_get_phys_port_id
,
5182 static void be_netdev_init(struct net_device
*netdev
)
5184 struct be_adapter
*adapter
= netdev_priv(netdev
);
5186 netdev
->hw_features
|= NETIF_F_SG
| NETIF_F_TSO
| NETIF_F_TSO6
|
5187 NETIF_F_IP_CSUM
| NETIF_F_IPV6_CSUM
| NETIF_F_RXCSUM
|
5188 NETIF_F_HW_VLAN_CTAG_TX
;
5189 if ((be_if_cap_flags(adapter
) & BE_IF_FLAGS_RSS
))
5190 netdev
->hw_features
|= NETIF_F_RXHASH
;
5192 netdev
->features
|= netdev
->hw_features
|
5193 NETIF_F_HW_VLAN_CTAG_RX
| NETIF_F_HW_VLAN_CTAG_FILTER
;
5195 netdev
->vlan_features
|= NETIF_F_SG
| NETIF_F_TSO
| NETIF_F_TSO6
|
5196 NETIF_F_IP_CSUM
| NETIF_F_IPV6_CSUM
;
5198 netdev
->priv_flags
|= IFF_UNICAST_FLT
;
5200 netdev
->flags
|= IFF_MULTICAST
;
5202 netif_set_gso_max_size(netdev
, BE_MAX_GSO_SIZE
- ETH_HLEN
);
5204 netdev
->netdev_ops
= &be_netdev_ops
;
5206 netdev
->ethtool_ops
= &be_ethtool_ops
;
5209 static void be_cleanup(struct be_adapter
*adapter
)
5211 struct net_device
*netdev
= adapter
->netdev
;
5214 netif_device_detach(netdev
);
5215 if (netif_running(netdev
))
5222 static int be_resume(struct be_adapter
*adapter
)
5224 struct net_device
*netdev
= adapter
->netdev
;
5227 status
= be_setup(adapter
);
5232 if (netif_running(netdev
))
5233 status
= be_open(netdev
);
5239 netif_device_attach(netdev
);
5244 static void be_soft_reset(struct be_adapter
*adapter
)
5248 dev_info(&adapter
->pdev
->dev
, "Initiating chip soft reset\n");
5249 val
= ioread32(adapter
->pcicfg
+ SLIPORT_SOFTRESET_OFFSET
);
5250 val
|= SLIPORT_SOFTRESET_SR_MASK
;
5251 iowrite32(val
, adapter
->pcicfg
+ SLIPORT_SOFTRESET_OFFSET
);
5254 static bool be_err_is_recoverable(struct be_adapter
*adapter
)
5256 struct be_error_recovery
*err_rec
= &adapter
->error_recovery
;
5257 unsigned long initial_idle_time
=
5258 msecs_to_jiffies(ERR_RECOVERY_IDLE_TIME
);
5259 unsigned long recovery_interval
=
5260 msecs_to_jiffies(ERR_RECOVERY_INTERVAL
);
5264 val
= be_POST_stage_get(adapter
);
5265 if ((val
& POST_STAGE_RECOVERABLE_ERR
) != POST_STAGE_RECOVERABLE_ERR
)
5267 ue_err_code
= val
& POST_ERR_RECOVERY_CODE_MASK
;
5268 if (ue_err_code
== 0)
5271 dev_err(&adapter
->pdev
->dev
, "Recoverable HW error code: 0x%x\n",
5274 if (jiffies
- err_rec
->probe_time
<= initial_idle_time
) {
5275 dev_err(&adapter
->pdev
->dev
,
5276 "Cannot recover within %lu sec from driver load\n",
5277 jiffies_to_msecs(initial_idle_time
) / MSEC_PER_SEC
);
5281 if (err_rec
->last_recovery_time
&&
5282 (jiffies
- err_rec
->last_recovery_time
<= recovery_interval
)) {
5283 dev_err(&adapter
->pdev
->dev
,
5284 "Cannot recover within %lu sec from last recovery\n",
5285 jiffies_to_msecs(recovery_interval
) / MSEC_PER_SEC
);
5289 if (ue_err_code
== err_rec
->last_err_code
) {
5290 dev_err(&adapter
->pdev
->dev
,
5291 "Cannot recover from a consecutive TPE error\n");
5295 err_rec
->last_recovery_time
= jiffies
;
5296 err_rec
->last_err_code
= ue_err_code
;
5300 static int be_tpe_recover(struct be_adapter
*adapter
)
5302 struct be_error_recovery
*err_rec
= &adapter
->error_recovery
;
5303 int status
= -EAGAIN
;
5306 switch (err_rec
->recovery_state
) {
5307 case ERR_RECOVERY_ST_NONE
:
5308 err_rec
->recovery_state
= ERR_RECOVERY_ST_DETECT
;
5309 err_rec
->resched_delay
= ERR_RECOVERY_UE_DETECT_DURATION
;
5312 case ERR_RECOVERY_ST_DETECT
:
5313 val
= be_POST_stage_get(adapter
);
5314 if ((val
& POST_STAGE_RECOVERABLE_ERR
) !=
5315 POST_STAGE_RECOVERABLE_ERR
) {
5316 dev_err(&adapter
->pdev
->dev
,
5317 "Unrecoverable HW error detected: 0x%x\n", val
);
5319 err_rec
->resched_delay
= 0;
5323 dev_err(&adapter
->pdev
->dev
, "Recoverable HW error detected\n");
5325 /* Only PF0 initiates Chip Soft Reset. But PF0 must wait UE2SR
5326 * milliseconds before it checks for final error status in
5327 * SLIPORT_SEMAPHORE to determine if recovery criteria is met.
5328 * If it does, then PF0 initiates a Soft Reset.
5330 if (adapter
->pf_num
== 0) {
5331 err_rec
->recovery_state
= ERR_RECOVERY_ST_RESET
;
5332 err_rec
->resched_delay
= err_rec
->ue_to_reset_time
-
5333 ERR_RECOVERY_UE_DETECT_DURATION
;
5337 err_rec
->recovery_state
= ERR_RECOVERY_ST_PRE_POLL
;
5338 err_rec
->resched_delay
= err_rec
->ue_to_poll_time
-
5339 ERR_RECOVERY_UE_DETECT_DURATION
;
5342 case ERR_RECOVERY_ST_RESET
:
5343 if (!be_err_is_recoverable(adapter
)) {
5344 dev_err(&adapter
->pdev
->dev
,
5345 "Failed to meet recovery criteria\n");
5347 err_rec
->resched_delay
= 0;
5350 be_soft_reset(adapter
);
5351 err_rec
->recovery_state
= ERR_RECOVERY_ST_PRE_POLL
;
5352 err_rec
->resched_delay
= err_rec
->ue_to_poll_time
-
5353 err_rec
->ue_to_reset_time
;
5356 case ERR_RECOVERY_ST_PRE_POLL
:
5357 err_rec
->recovery_state
= ERR_RECOVERY_ST_REINIT
;
5358 err_rec
->resched_delay
= 0;
5359 status
= 0; /* done */
5364 err_rec
->resched_delay
= 0;
5371 static int be_err_recover(struct be_adapter
*adapter
)
5375 if (!lancer_chip(adapter
)) {
5376 if (!adapter
->error_recovery
.recovery_supported
||
5377 adapter
->priv_flags
& BE_DISABLE_TPE_RECOVERY
)
5379 status
= be_tpe_recover(adapter
);
5384 /* Wait for adapter to reach quiescent state before
5387 status
= be_fw_wait_ready(adapter
);
5391 adapter
->flags
|= BE_FLAGS_TRY_RECOVERY
;
5393 be_cleanup(adapter
);
5395 status
= be_resume(adapter
);
5399 adapter
->flags
&= ~BE_FLAGS_TRY_RECOVERY
;
5405 static void be_err_detection_task(struct work_struct
*work
)
5407 struct be_error_recovery
*err_rec
=
5408 container_of(work
, struct be_error_recovery
,
5409 err_detection_work
.work
);
5410 struct be_adapter
*adapter
=
5411 container_of(err_rec
, struct be_adapter
,
5413 u32 resched_delay
= ERR_RECOVERY_DETECTION_DELAY
;
5414 struct device
*dev
= &adapter
->pdev
->dev
;
5415 int recovery_status
;
5417 be_detect_error(adapter
);
5418 if (!be_check_error(adapter
, BE_ERROR_HW
))
5419 goto reschedule_task
;
5421 recovery_status
= be_err_recover(adapter
);
5422 if (!recovery_status
) {
5423 err_rec
->recovery_retries
= 0;
5424 err_rec
->recovery_state
= ERR_RECOVERY_ST_NONE
;
5425 dev_info(dev
, "Adapter recovery successful\n");
5426 goto reschedule_task
;
5427 } else if (!lancer_chip(adapter
) && err_rec
->resched_delay
) {
5428 /* BEx/SH recovery state machine */
5429 if (adapter
->pf_num
== 0 &&
5430 err_rec
->recovery_state
> ERR_RECOVERY_ST_DETECT
)
5431 dev_err(&adapter
->pdev
->dev
,
5432 "Adapter recovery in progress\n");
5433 resched_delay
= err_rec
->resched_delay
;
5434 goto reschedule_task
;
5435 } else if (lancer_chip(adapter
) && be_virtfn(adapter
)) {
5436 /* For VFs, check if PF have allocated resources
5439 dev_err(dev
, "Re-trying adapter recovery\n");
5440 goto reschedule_task
;
5441 } else if (lancer_chip(adapter
) && err_rec
->recovery_retries
++ <
5442 ERR_RECOVERY_MAX_RETRY_COUNT
) {
5443 /* In case of another error during recovery, it takes 30 sec
5444 * for adapter to come out of error. Retry error recovery after
5445 * this time interval.
5447 dev_err(&adapter
->pdev
->dev
, "Re-trying adapter recovery\n");
5448 resched_delay
= ERR_RECOVERY_RETRY_DELAY
;
5449 goto reschedule_task
;
5451 dev_err(dev
, "Adapter recovery failed\n");
5452 dev_err(dev
, "Please reboot server to recover\n");
5458 be_schedule_err_detection(adapter
, resched_delay
);
5461 static void be_log_sfp_info(struct be_adapter
*adapter
)
5465 status
= be_cmd_query_sfp_info(adapter
);
5467 dev_err(&adapter
->pdev
->dev
,
5468 "Port %c: %s Vendor: %s part no: %s",
5470 be_misconfig_evt_port_state
[adapter
->phy_state
],
5471 adapter
->phy
.vendor_name
,
5472 adapter
->phy
.vendor_pn
);
5474 adapter
->flags
&= ~BE_FLAGS_PHY_MISCONFIGURED
;
5477 static void be_worker(struct work_struct
*work
)
5479 struct be_adapter
*adapter
=
5480 container_of(work
, struct be_adapter
, work
.work
);
5481 struct be_rx_obj
*rxo
;
5484 if (be_physfn(adapter
) &&
5485 MODULO(adapter
->work_counter
, adapter
->be_get_temp_freq
) == 0)
5486 be_cmd_get_die_temperature(adapter
);
5488 /* when interrupts are not yet enabled, just reap any pending
5491 if (!netif_running(adapter
->netdev
)) {
5493 be_process_mcc(adapter
);
5498 if (!adapter
->stats_cmd_sent
) {
5499 if (lancer_chip(adapter
))
5500 lancer_cmd_get_pport_stats(adapter
,
5501 &adapter
->stats_cmd
);
5503 be_cmd_get_stats(adapter
, &adapter
->stats_cmd
);
5506 for_all_rx_queues(adapter
, rxo
, i
) {
5507 /* Replenish RX-queues starved due to memory
5508 * allocation failures.
5510 if (rxo
->rx_post_starved
)
5511 be_post_rx_frags(rxo
, GFP_KERNEL
, MAX_RX_POST
);
5514 /* EQ-delay update for Skyhawk is done while notifying EQ */
5515 if (!skyhawk_chip(adapter
))
5516 be_eqd_update(adapter
, false);
5518 if (adapter
->flags
& BE_FLAGS_PHY_MISCONFIGURED
)
5519 be_log_sfp_info(adapter
);
5522 adapter
->work_counter
++;
5523 queue_delayed_work(be_wq
, &adapter
->work
, msecs_to_jiffies(1000));
5526 static void be_unmap_pci_bars(struct be_adapter
*adapter
)
5529 pci_iounmap(adapter
->pdev
, adapter
->csr
);
5531 pci_iounmap(adapter
->pdev
, adapter
->db
);
5532 if (adapter
->pcicfg
&& adapter
->pcicfg_mapped
)
5533 pci_iounmap(adapter
->pdev
, adapter
->pcicfg
);
5536 static int db_bar(struct be_adapter
*adapter
)
5538 if (lancer_chip(adapter
) || be_virtfn(adapter
))
5544 static int be_roce_map_pci_bars(struct be_adapter
*adapter
)
5546 if (skyhawk_chip(adapter
)) {
5547 adapter
->roce_db
.size
= 4096;
5548 adapter
->roce_db
.io_addr
= pci_resource_start(adapter
->pdev
,
5550 adapter
->roce_db
.total_size
= pci_resource_len(adapter
->pdev
,
5556 static int be_map_pci_bars(struct be_adapter
*adapter
)
5558 struct pci_dev
*pdev
= adapter
->pdev
;
5562 pci_read_config_dword(adapter
->pdev
, SLI_INTF_REG_OFFSET
, &sli_intf
);
5563 adapter
->sli_family
= (sli_intf
& SLI_INTF_FAMILY_MASK
) >>
5564 SLI_INTF_FAMILY_SHIFT
;
5565 adapter
->virtfn
= (sli_intf
& SLI_INTF_FT_MASK
) ? 1 : 0;
5567 if (BEx_chip(adapter
) && be_physfn(adapter
)) {
5568 adapter
->csr
= pci_iomap(pdev
, 2, 0);
5573 addr
= pci_iomap(pdev
, db_bar(adapter
), 0);
5578 if (skyhawk_chip(adapter
) || BEx_chip(adapter
)) {
5579 if (be_physfn(adapter
)) {
5580 /* PCICFG is the 2nd BAR in BE2 */
5581 addr
= pci_iomap(pdev
, BE2_chip(adapter
) ? 1 : 0, 0);
5584 adapter
->pcicfg
= addr
;
5585 adapter
->pcicfg_mapped
= true;
5587 adapter
->pcicfg
= adapter
->db
+ SRIOV_VF_PCICFG_OFFSET
;
5588 adapter
->pcicfg_mapped
= false;
5592 be_roce_map_pci_bars(adapter
);
5596 dev_err(&pdev
->dev
, "Error in mapping PCI BARs\n");
5597 be_unmap_pci_bars(adapter
);
5601 static void be_drv_cleanup(struct be_adapter
*adapter
)
5603 struct be_dma_mem
*mem
= &adapter
->mbox_mem_alloced
;
5604 struct device
*dev
= &adapter
->pdev
->dev
;
5607 dma_free_coherent(dev
, mem
->size
, mem
->va
, mem
->dma
);
5609 mem
= &adapter
->rx_filter
;
5611 dma_free_coherent(dev
, mem
->size
, mem
->va
, mem
->dma
);
5613 mem
= &adapter
->stats_cmd
;
5615 dma_free_coherent(dev
, mem
->size
, mem
->va
, mem
->dma
);
5618 /* Allocate and initialize various fields in be_adapter struct */
5619 static int be_drv_init(struct be_adapter
*adapter
)
5621 struct be_dma_mem
*mbox_mem_alloc
= &adapter
->mbox_mem_alloced
;
5622 struct be_dma_mem
*mbox_mem_align
= &adapter
->mbox_mem
;
5623 struct be_dma_mem
*rx_filter
= &adapter
->rx_filter
;
5624 struct be_dma_mem
*stats_cmd
= &adapter
->stats_cmd
;
5625 struct device
*dev
= &adapter
->pdev
->dev
;
5628 mbox_mem_alloc
->size
= sizeof(struct be_mcc_mailbox
) + 16;
5629 mbox_mem_alloc
->va
= dma_zalloc_coherent(dev
, mbox_mem_alloc
->size
,
5630 &mbox_mem_alloc
->dma
,
5632 if (!mbox_mem_alloc
->va
)
5635 mbox_mem_align
->size
= sizeof(struct be_mcc_mailbox
);
5636 mbox_mem_align
->va
= PTR_ALIGN(mbox_mem_alloc
->va
, 16);
5637 mbox_mem_align
->dma
= PTR_ALIGN(mbox_mem_alloc
->dma
, 16);
5639 rx_filter
->size
= sizeof(struct be_cmd_req_rx_filter
);
5640 rx_filter
->va
= dma_zalloc_coherent(dev
, rx_filter
->size
,
5641 &rx_filter
->dma
, GFP_KERNEL
);
5642 if (!rx_filter
->va
) {
5647 if (lancer_chip(adapter
))
5648 stats_cmd
->size
= sizeof(struct lancer_cmd_req_pport_stats
);
5649 else if (BE2_chip(adapter
))
5650 stats_cmd
->size
= sizeof(struct be_cmd_req_get_stats_v0
);
5651 else if (BE3_chip(adapter
))
5652 stats_cmd
->size
= sizeof(struct be_cmd_req_get_stats_v1
);
5654 stats_cmd
->size
= sizeof(struct be_cmd_req_get_stats_v2
);
5655 stats_cmd
->va
= dma_zalloc_coherent(dev
, stats_cmd
->size
,
5656 &stats_cmd
->dma
, GFP_KERNEL
);
5657 if (!stats_cmd
->va
) {
5659 goto free_rx_filter
;
5662 mutex_init(&adapter
->mbox_lock
);
5663 mutex_init(&adapter
->mcc_lock
);
5664 mutex_init(&adapter
->rx_filter_lock
);
5665 spin_lock_init(&adapter
->mcc_cq_lock
);
5666 init_completion(&adapter
->et_cmd_compl
);
5668 pci_save_state(adapter
->pdev
);
5670 INIT_DELAYED_WORK(&adapter
->work
, be_worker
);
5672 adapter
->error_recovery
.recovery_state
= ERR_RECOVERY_ST_NONE
;
5673 adapter
->error_recovery
.resched_delay
= 0;
5674 INIT_DELAYED_WORK(&adapter
->error_recovery
.err_detection_work
,
5675 be_err_detection_task
);
5677 adapter
->rx_fc
= true;
5678 adapter
->tx_fc
= true;
5680 /* Must be a power of 2 or else MODULO will BUG_ON */
5681 adapter
->be_get_temp_freq
= 64;
5686 dma_free_coherent(dev
, rx_filter
->size
, rx_filter
->va
, rx_filter
->dma
);
5688 dma_free_coherent(dev
, mbox_mem_alloc
->size
, mbox_mem_alloc
->va
,
5689 mbox_mem_alloc
->dma
);
5693 static void be_remove(struct pci_dev
*pdev
)
5695 struct be_adapter
*adapter
= pci_get_drvdata(pdev
);
5700 be_roce_dev_remove(adapter
);
5701 be_intr_set(adapter
, false);
5703 be_cancel_err_detection(adapter
);
5705 unregister_netdev(adapter
->netdev
);
5709 if (!pci_vfs_assigned(adapter
->pdev
))
5710 be_cmd_reset_function(adapter
);
5712 /* tell fw we're done with firing cmds */
5713 be_cmd_fw_clean(adapter
);
5715 be_unmap_pci_bars(adapter
);
5716 be_drv_cleanup(adapter
);
5718 pci_disable_pcie_error_reporting(pdev
);
5720 pci_release_regions(pdev
);
5721 pci_disable_device(pdev
);
5723 free_netdev(adapter
->netdev
);
5726 static ssize_t
be_hwmon_show_temp(struct device
*dev
,
5727 struct device_attribute
*dev_attr
,
5730 struct be_adapter
*adapter
= dev_get_drvdata(dev
);
5732 /* Unit: millidegree Celsius */
5733 if (adapter
->hwmon_info
.be_on_die_temp
== BE_INVALID_DIE_TEMP
)
5736 return sprintf(buf
, "%u\n",
5737 adapter
->hwmon_info
.be_on_die_temp
* 1000);
5740 static SENSOR_DEVICE_ATTR(temp1_input
, S_IRUGO
,
5741 be_hwmon_show_temp
, NULL
, 1);
5743 static struct attribute
*be_hwmon_attrs
[] = {
5744 &sensor_dev_attr_temp1_input
.dev_attr
.attr
,
5748 ATTRIBUTE_GROUPS(be_hwmon
);
5750 static char *mc_name(struct be_adapter
*adapter
)
5752 char *str
= ""; /* default */
5754 switch (adapter
->mc_type
) {
5780 static inline char *func_name(struct be_adapter
*adapter
)
5782 return be_physfn(adapter
) ? "PF" : "VF";
5785 static inline char *nic_name(struct pci_dev
*pdev
)
5787 switch (pdev
->device
) {
5794 return OC_NAME_LANCER
;
5805 static int be_probe(struct pci_dev
*pdev
, const struct pci_device_id
*pdev_id
)
5807 struct be_adapter
*adapter
;
5808 struct net_device
*netdev
;
5811 dev_info(&pdev
->dev
, "%s version is %s\n", DRV_NAME
, DRV_VER
);
5813 status
= pci_enable_device(pdev
);
5817 status
= pci_request_regions(pdev
, DRV_NAME
);
5820 pci_set_master(pdev
);
5822 netdev
= alloc_etherdev_mqs(sizeof(*adapter
), MAX_TX_QS
, MAX_RX_QS
);
5827 adapter
= netdev_priv(netdev
);
5828 adapter
->pdev
= pdev
;
5829 pci_set_drvdata(pdev
, adapter
);
5830 adapter
->netdev
= netdev
;
5831 SET_NETDEV_DEV(netdev
, &pdev
->dev
);
5833 status
= dma_set_mask_and_coherent(&pdev
->dev
, DMA_BIT_MASK(64));
5835 netdev
->features
|= NETIF_F_HIGHDMA
;
5837 status
= dma_set_mask_and_coherent(&pdev
->dev
, DMA_BIT_MASK(32));
5839 dev_err(&pdev
->dev
, "Could not set PCI DMA Mask\n");
5844 status
= pci_enable_pcie_error_reporting(pdev
);
5846 dev_info(&pdev
->dev
, "PCIe error reporting enabled\n");
5848 status
= be_map_pci_bars(adapter
);
5852 status
= be_drv_init(adapter
);
5856 status
= be_setup(adapter
);
5860 be_netdev_init(netdev
);
5861 status
= register_netdev(netdev
);
5865 be_roce_dev_add(adapter
);
5867 be_schedule_err_detection(adapter
, ERR_DETECTION_DELAY
);
5868 adapter
->error_recovery
.probe_time
= jiffies
;
5870 /* On Die temperature not supported for VF. */
5871 if (be_physfn(adapter
) && IS_ENABLED(CONFIG_BE2NET_HWMON
)) {
5872 adapter
->hwmon_info
.hwmon_dev
=
5873 devm_hwmon_device_register_with_groups(&pdev
->dev
,
5877 adapter
->hwmon_info
.be_on_die_temp
= BE_INVALID_DIE_TEMP
;
5880 dev_info(&pdev
->dev
, "%s: %s %s port %c\n", nic_name(pdev
),
5881 func_name(adapter
), mc_name(adapter
), adapter
->port_name
);
5888 be_drv_cleanup(adapter
);
5890 be_unmap_pci_bars(adapter
);
5892 free_netdev(netdev
);
5894 pci_release_regions(pdev
);
5896 pci_disable_device(pdev
);
5898 dev_err(&pdev
->dev
, "%s initialization failed\n", nic_name(pdev
));
5902 static int be_suspend(struct pci_dev
*pdev
, pm_message_t state
)
5904 struct be_adapter
*adapter
= pci_get_drvdata(pdev
);
5906 be_intr_set(adapter
, false);
5907 be_cancel_err_detection(adapter
);
5909 be_cleanup(adapter
);
5911 pci_save_state(pdev
);
5912 pci_disable_device(pdev
);
5913 pci_set_power_state(pdev
, pci_choose_state(pdev
, state
));
5917 static int be_pci_resume(struct pci_dev
*pdev
)
5919 struct be_adapter
*adapter
= pci_get_drvdata(pdev
);
5922 status
= pci_enable_device(pdev
);
5926 pci_restore_state(pdev
);
5928 status
= be_resume(adapter
);
5932 be_schedule_err_detection(adapter
, ERR_DETECTION_DELAY
);
5938 * An FLR will stop BE from DMAing any data.
5940 static void be_shutdown(struct pci_dev
*pdev
)
5942 struct be_adapter
*adapter
= pci_get_drvdata(pdev
);
5947 be_roce_dev_shutdown(adapter
);
5948 cancel_delayed_work_sync(&adapter
->work
);
5949 be_cancel_err_detection(adapter
);
5951 netif_device_detach(adapter
->netdev
);
5953 be_cmd_reset_function(adapter
);
5955 pci_disable_device(pdev
);
5958 static pci_ers_result_t
be_eeh_err_detected(struct pci_dev
*pdev
,
5959 pci_channel_state_t state
)
5961 struct be_adapter
*adapter
= pci_get_drvdata(pdev
);
5963 dev_err(&adapter
->pdev
->dev
, "EEH error detected\n");
5965 be_roce_dev_remove(adapter
);
5967 if (!be_check_error(adapter
, BE_ERROR_EEH
)) {
5968 be_set_error(adapter
, BE_ERROR_EEH
);
5970 be_cancel_err_detection(adapter
);
5972 be_cleanup(adapter
);
5975 if (state
== pci_channel_io_perm_failure
)
5976 return PCI_ERS_RESULT_DISCONNECT
;
5978 pci_disable_device(pdev
);
5980 /* The error could cause the FW to trigger a flash debug dump.
5981 * Resetting the card while flash dump is in progress
5982 * can cause it not to recover; wait for it to finish.
5983 * Wait only for first function as it is needed only once per
5986 if (pdev
->devfn
== 0)
5989 return PCI_ERS_RESULT_NEED_RESET
;
5992 static pci_ers_result_t
be_eeh_reset(struct pci_dev
*pdev
)
5994 struct be_adapter
*adapter
= pci_get_drvdata(pdev
);
5997 dev_info(&adapter
->pdev
->dev
, "EEH reset\n");
5999 status
= pci_enable_device(pdev
);
6001 return PCI_ERS_RESULT_DISCONNECT
;
6003 pci_set_master(pdev
);
6004 pci_restore_state(pdev
);
6006 /* Check if card is ok and fw is ready */
6007 dev_info(&adapter
->pdev
->dev
,
6008 "Waiting for FW to be ready after EEH reset\n");
6009 status
= be_fw_wait_ready(adapter
);
6011 return PCI_ERS_RESULT_DISCONNECT
;
6013 pci_cleanup_aer_uncorrect_error_status(pdev
);
6014 be_clear_error(adapter
, BE_CLEAR_ALL
);
6015 return PCI_ERS_RESULT_RECOVERED
;
6018 static void be_eeh_resume(struct pci_dev
*pdev
)
6021 struct be_adapter
*adapter
= pci_get_drvdata(pdev
);
6023 dev_info(&adapter
->pdev
->dev
, "EEH resume\n");
6025 pci_save_state(pdev
);
6027 status
= be_resume(adapter
);
6031 be_roce_dev_add(adapter
);
6033 be_schedule_err_detection(adapter
, ERR_DETECTION_DELAY
);
6036 dev_err(&adapter
->pdev
->dev
, "EEH resume failed\n");
6039 static int be_pci_sriov_configure(struct pci_dev
*pdev
, int num_vfs
)
6041 struct be_adapter
*adapter
= pci_get_drvdata(pdev
);
6042 struct be_resources vft_res
= {0};
6046 be_vf_clear(adapter
);
6048 adapter
->num_vfs
= num_vfs
;
6050 if (adapter
->num_vfs
== 0 && pci_vfs_assigned(pdev
)) {
6051 dev_warn(&pdev
->dev
,
6052 "Cannot disable VFs while they are assigned\n");
6056 /* When the HW is in SRIOV capable configuration, the PF-pool resources
6057 * are equally distributed across the max-number of VFs. The user may
6058 * request only a subset of the max-vfs to be enabled.
6059 * Based on num_vfs, redistribute the resources across num_vfs so that
6060 * each VF will have access to more number of resources.
6061 * This facility is not available in BE3 FW.
6062 * Also, this is done by FW in Lancer chip.
6064 if (skyhawk_chip(adapter
) && !pci_num_vf(pdev
)) {
6065 be_calculate_vf_res(adapter
, adapter
->num_vfs
,
6067 status
= be_cmd_set_sriov_config(adapter
, adapter
->pool_res
,
6068 adapter
->num_vfs
, &vft_res
);
6071 "Failed to optimize SR-IOV resources\n");
6074 status
= be_get_resources(adapter
);
6076 return be_cmd_status(status
);
6078 /* Updating real_num_tx/rx_queues() requires rtnl_lock() */
6080 status
= be_update_queues(adapter
);
6083 return be_cmd_status(status
);
6085 if (adapter
->num_vfs
)
6086 status
= be_vf_setup(adapter
);
6089 return adapter
->num_vfs
;
6094 static const struct pci_error_handlers be_eeh_handlers
= {
6095 .error_detected
= be_eeh_err_detected
,
6096 .slot_reset
= be_eeh_reset
,
6097 .resume
= be_eeh_resume
,
6100 static struct pci_driver be_driver
= {
6102 .id_table
= be_dev_ids
,
6104 .remove
= be_remove
,
6105 .suspend
= be_suspend
,
6106 .resume
= be_pci_resume
,
6107 .shutdown
= be_shutdown
,
6108 .sriov_configure
= be_pci_sriov_configure
,
6109 .err_handler
= &be_eeh_handlers
6112 static int __init
be_init_module(void)
6116 if (rx_frag_size
!= 8192 && rx_frag_size
!= 4096 &&
6117 rx_frag_size
!= 2048) {
6118 printk(KERN_WARNING DRV_NAME
6119 " : Module param rx_frag_size must be 2048/4096/8192."
6121 rx_frag_size
= 2048;
6125 pr_info(DRV_NAME
" : Module param num_vfs is obsolete.");
6126 pr_info(DRV_NAME
" : Use sysfs method to enable VFs\n");
6129 be_wq
= create_singlethread_workqueue("be_wq");
6131 pr_warn(DRV_NAME
"workqueue creation failed\n");
6135 be_err_recovery_workq
=
6136 create_singlethread_workqueue("be_err_recover");
6137 if (!be_err_recovery_workq
)
6138 pr_warn(DRV_NAME
"Could not create error recovery workqueue\n");
6140 status
= pci_register_driver(&be_driver
);
6142 destroy_workqueue(be_wq
);
6143 be_destroy_err_recovery_workq();
6147 module_init(be_init_module
);
6149 static void __exit
be_exit_module(void)
6151 pci_unregister_driver(&be_driver
);
6153 be_destroy_err_recovery_workq();
6156 destroy_workqueue(be_wq
);
6158 module_exit(be_exit_module
);