1 /*******************************************************************************
3 Intel PRO/1000 Linux driver
4 Copyright(c) 1999 - 2006 Intel Corporation.
6 This program is free software; you can redistribute it and/or modify it
7 under the terms and conditions of the GNU General Public License,
8 version 2, as published by the Free Software Foundation.
10 This program is distributed in the hope it will be useful, but WITHOUT
11 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
15 You should have received a copy of the GNU General Public License along with
16 this program; if not, write to the Free Software Foundation, Inc.,
17 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
19 The full GNU General Public License is included in this distribution in
20 the file called "COPYING".
23 Linux NICS <linux.nics@intel.com>
24 e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
25 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
27 *******************************************************************************/
30 #include <net/ip6_checksum.h>
32 #include <linux/prefetch.h>
33 #include <linux/bitops.h>
34 #include <linux/if_vlan.h>
36 char e1000_driver_name
[] = "e1000";
37 static char e1000_driver_string
[] = "Intel(R) PRO/1000 Network Driver";
38 #define DRV_VERSION "7.3.21-k8-NAPI"
39 const char e1000_driver_version
[] = DRV_VERSION
;
40 static const char e1000_copyright
[] = "Copyright (c) 1999-2006 Intel Corporation.";
42 /* e1000_pci_tbl - PCI Device ID Table
44 * Last entry must be all 0s
47 * {PCI_DEVICE(PCI_VENDOR_ID_INTEL, device_id)}
49 static DEFINE_PCI_DEVICE_TABLE(e1000_pci_tbl
) = {
50 INTEL_E1000_ETHERNET_DEVICE(0x1000),
51 INTEL_E1000_ETHERNET_DEVICE(0x1001),
52 INTEL_E1000_ETHERNET_DEVICE(0x1004),
53 INTEL_E1000_ETHERNET_DEVICE(0x1008),
54 INTEL_E1000_ETHERNET_DEVICE(0x1009),
55 INTEL_E1000_ETHERNET_DEVICE(0x100C),
56 INTEL_E1000_ETHERNET_DEVICE(0x100D),
57 INTEL_E1000_ETHERNET_DEVICE(0x100E),
58 INTEL_E1000_ETHERNET_DEVICE(0x100F),
59 INTEL_E1000_ETHERNET_DEVICE(0x1010),
60 INTEL_E1000_ETHERNET_DEVICE(0x1011),
61 INTEL_E1000_ETHERNET_DEVICE(0x1012),
62 INTEL_E1000_ETHERNET_DEVICE(0x1013),
63 INTEL_E1000_ETHERNET_DEVICE(0x1014),
64 INTEL_E1000_ETHERNET_DEVICE(0x1015),
65 INTEL_E1000_ETHERNET_DEVICE(0x1016),
66 INTEL_E1000_ETHERNET_DEVICE(0x1017),
67 INTEL_E1000_ETHERNET_DEVICE(0x1018),
68 INTEL_E1000_ETHERNET_DEVICE(0x1019),
69 INTEL_E1000_ETHERNET_DEVICE(0x101A),
70 INTEL_E1000_ETHERNET_DEVICE(0x101D),
71 INTEL_E1000_ETHERNET_DEVICE(0x101E),
72 INTEL_E1000_ETHERNET_DEVICE(0x1026),
73 INTEL_E1000_ETHERNET_DEVICE(0x1027),
74 INTEL_E1000_ETHERNET_DEVICE(0x1028),
75 INTEL_E1000_ETHERNET_DEVICE(0x1075),
76 INTEL_E1000_ETHERNET_DEVICE(0x1076),
77 INTEL_E1000_ETHERNET_DEVICE(0x1077),
78 INTEL_E1000_ETHERNET_DEVICE(0x1078),
79 INTEL_E1000_ETHERNET_DEVICE(0x1079),
80 INTEL_E1000_ETHERNET_DEVICE(0x107A),
81 INTEL_E1000_ETHERNET_DEVICE(0x107B),
82 INTEL_E1000_ETHERNET_DEVICE(0x107C),
83 INTEL_E1000_ETHERNET_DEVICE(0x108A),
84 INTEL_E1000_ETHERNET_DEVICE(0x1099),
85 INTEL_E1000_ETHERNET_DEVICE(0x10B5),
86 INTEL_E1000_ETHERNET_DEVICE(0x2E6E),
87 /* required last entry */
91 MODULE_DEVICE_TABLE(pci
, e1000_pci_tbl
);
93 int e1000_up(struct e1000_adapter
*adapter
);
94 void e1000_down(struct e1000_adapter
*adapter
);
95 void e1000_reinit_locked(struct e1000_adapter
*adapter
);
96 void e1000_reset(struct e1000_adapter
*adapter
);
97 int e1000_setup_all_tx_resources(struct e1000_adapter
*adapter
);
98 int e1000_setup_all_rx_resources(struct e1000_adapter
*adapter
);
99 void e1000_free_all_tx_resources(struct e1000_adapter
*adapter
);
100 void e1000_free_all_rx_resources(struct e1000_adapter
*adapter
);
101 static int e1000_setup_tx_resources(struct e1000_adapter
*adapter
,
102 struct e1000_tx_ring
*txdr
);
103 static int e1000_setup_rx_resources(struct e1000_adapter
*adapter
,
104 struct e1000_rx_ring
*rxdr
);
105 static void e1000_free_tx_resources(struct e1000_adapter
*adapter
,
106 struct e1000_tx_ring
*tx_ring
);
107 static void e1000_free_rx_resources(struct e1000_adapter
*adapter
,
108 struct e1000_rx_ring
*rx_ring
);
109 void e1000_update_stats(struct e1000_adapter
*adapter
);
111 static int e1000_init_module(void);
112 static void e1000_exit_module(void);
113 static int e1000_probe(struct pci_dev
*pdev
, const struct pci_device_id
*ent
);
114 static void __devexit
e1000_remove(struct pci_dev
*pdev
);
115 static int e1000_alloc_queues(struct e1000_adapter
*adapter
);
116 static int e1000_sw_init(struct e1000_adapter
*adapter
);
117 static int e1000_open(struct net_device
*netdev
);
118 static int e1000_close(struct net_device
*netdev
);
119 static void e1000_configure_tx(struct e1000_adapter
*adapter
);
120 static void e1000_configure_rx(struct e1000_adapter
*adapter
);
121 static void e1000_setup_rctl(struct e1000_adapter
*adapter
);
122 static void e1000_clean_all_tx_rings(struct e1000_adapter
*adapter
);
123 static void e1000_clean_all_rx_rings(struct e1000_adapter
*adapter
);
124 static void e1000_clean_tx_ring(struct e1000_adapter
*adapter
,
125 struct e1000_tx_ring
*tx_ring
);
126 static void e1000_clean_rx_ring(struct e1000_adapter
*adapter
,
127 struct e1000_rx_ring
*rx_ring
);
128 static void e1000_set_rx_mode(struct net_device
*netdev
);
129 static void e1000_update_phy_info_task(struct work_struct
*work
);
130 static void e1000_watchdog(struct work_struct
*work
);
131 static void e1000_82547_tx_fifo_stall_task(struct work_struct
*work
);
132 static netdev_tx_t
e1000_xmit_frame(struct sk_buff
*skb
,
133 struct net_device
*netdev
);
134 static struct net_device_stats
* e1000_get_stats(struct net_device
*netdev
);
135 static int e1000_change_mtu(struct net_device
*netdev
, int new_mtu
);
136 static int e1000_set_mac(struct net_device
*netdev
, void *p
);
137 static irqreturn_t
e1000_intr(int irq
, void *data
);
138 static bool e1000_clean_tx_irq(struct e1000_adapter
*adapter
,
139 struct e1000_tx_ring
*tx_ring
);
140 static int e1000_clean(struct napi_struct
*napi
, int budget
);
141 static bool e1000_clean_rx_irq(struct e1000_adapter
*adapter
,
142 struct e1000_rx_ring
*rx_ring
,
143 int *work_done
, int work_to_do
);
144 static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter
*adapter
,
145 struct e1000_rx_ring
*rx_ring
,
146 int *work_done
, int work_to_do
);
147 static void e1000_alloc_rx_buffers(struct e1000_adapter
*adapter
,
148 struct e1000_rx_ring
*rx_ring
,
150 static void e1000_alloc_jumbo_rx_buffers(struct e1000_adapter
*adapter
,
151 struct e1000_rx_ring
*rx_ring
,
153 static int e1000_ioctl(struct net_device
*netdev
, struct ifreq
*ifr
, int cmd
);
154 static int e1000_mii_ioctl(struct net_device
*netdev
, struct ifreq
*ifr
,
156 static void e1000_enter_82542_rst(struct e1000_adapter
*adapter
);
157 static void e1000_leave_82542_rst(struct e1000_adapter
*adapter
);
158 static void e1000_tx_timeout(struct net_device
*dev
);
159 static void e1000_reset_task(struct work_struct
*work
);
160 static void e1000_smartspeed(struct e1000_adapter
*adapter
);
161 static int e1000_82547_fifo_workaround(struct e1000_adapter
*adapter
,
162 struct sk_buff
*skb
);
164 static bool e1000_vlan_used(struct e1000_adapter
*adapter
);
165 static void e1000_vlan_mode(struct net_device
*netdev
,
166 netdev_features_t features
);
167 static void e1000_vlan_filter_on_off(struct e1000_adapter
*adapter
,
169 static int e1000_vlan_rx_add_vid(struct net_device
*netdev
, u16 vid
);
170 static int e1000_vlan_rx_kill_vid(struct net_device
*netdev
, u16 vid
);
171 static void e1000_restore_vlan(struct e1000_adapter
*adapter
);
174 static int e1000_suspend(struct pci_dev
*pdev
, pm_message_t state
);
175 static int e1000_resume(struct pci_dev
*pdev
);
177 static void e1000_shutdown(struct pci_dev
*pdev
);
179 #ifdef CONFIG_NET_POLL_CONTROLLER
180 /* for netdump / net console */
181 static void e1000_netpoll (struct net_device
*netdev
);
184 #define COPYBREAK_DEFAULT 256
185 static unsigned int copybreak __read_mostly
= COPYBREAK_DEFAULT
;
186 module_param(copybreak
, uint
, 0644);
187 MODULE_PARM_DESC(copybreak
,
188 "Maximum size of packet that is copied to a new buffer on receive");
190 static pci_ers_result_t
e1000_io_error_detected(struct pci_dev
*pdev
,
191 pci_channel_state_t state
);
192 static pci_ers_result_t
e1000_io_slot_reset(struct pci_dev
*pdev
);
193 static void e1000_io_resume(struct pci_dev
*pdev
);
195 static struct pci_error_handlers e1000_err_handler
= {
196 .error_detected
= e1000_io_error_detected
,
197 .slot_reset
= e1000_io_slot_reset
,
198 .resume
= e1000_io_resume
,
201 static struct pci_driver e1000_driver
= {
202 .name
= e1000_driver_name
,
203 .id_table
= e1000_pci_tbl
,
204 .probe
= e1000_probe
,
205 .remove
= __devexit_p(e1000_remove
),
207 /* Power Management Hooks */
208 .suspend
= e1000_suspend
,
209 .resume
= e1000_resume
,
211 .shutdown
= e1000_shutdown
,
212 .err_handler
= &e1000_err_handler
215 MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
216 MODULE_DESCRIPTION("Intel(R) PRO/1000 Network Driver");
217 MODULE_LICENSE("GPL");
218 MODULE_VERSION(DRV_VERSION
);
220 #define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK)
221 static int debug
= -1;
222 module_param(debug
, int, 0);
223 MODULE_PARM_DESC(debug
, "Debug level (0=none,...,16=all)");
226 * e1000_get_hw_dev - return device
227 * used by hardware layer to print debugging information
230 struct net_device
*e1000_get_hw_dev(struct e1000_hw
*hw
)
232 struct e1000_adapter
*adapter
= hw
->back
;
233 return adapter
->netdev
;
237 * e1000_init_module - Driver Registration Routine
239 * e1000_init_module is the first routine called when the driver is
240 * loaded. All it does is register with the PCI subsystem.
243 static int __init
e1000_init_module(void)
246 pr_info("%s - version %s\n", e1000_driver_string
, e1000_driver_version
);
248 pr_info("%s\n", e1000_copyright
);
250 ret
= pci_register_driver(&e1000_driver
);
251 if (copybreak
!= COPYBREAK_DEFAULT
) {
253 pr_info("copybreak disabled\n");
255 pr_info("copybreak enabled for "
256 "packets <= %u bytes\n", copybreak
);
261 module_init(e1000_init_module
);
264 * e1000_exit_module - Driver Exit Cleanup Routine
266 * e1000_exit_module is called just before the driver is removed
270 static void __exit
e1000_exit_module(void)
272 pci_unregister_driver(&e1000_driver
);
275 module_exit(e1000_exit_module
);
277 static int e1000_request_irq(struct e1000_adapter
*adapter
)
279 struct net_device
*netdev
= adapter
->netdev
;
280 irq_handler_t handler
= e1000_intr
;
281 int irq_flags
= IRQF_SHARED
;
284 err
= request_irq(adapter
->pdev
->irq
, handler
, irq_flags
, netdev
->name
,
287 e_err(probe
, "Unable to allocate interrupt Error: %d\n", err
);
293 static void e1000_free_irq(struct e1000_adapter
*adapter
)
295 struct net_device
*netdev
= adapter
->netdev
;
297 free_irq(adapter
->pdev
->irq
, netdev
);
301 * e1000_irq_disable - Mask off interrupt generation on the NIC
302 * @adapter: board private structure
305 static void e1000_irq_disable(struct e1000_adapter
*adapter
)
307 struct e1000_hw
*hw
= &adapter
->hw
;
311 synchronize_irq(adapter
->pdev
->irq
);
315 * e1000_irq_enable - Enable default interrupt generation settings
316 * @adapter: board private structure
319 static void e1000_irq_enable(struct e1000_adapter
*adapter
)
321 struct e1000_hw
*hw
= &adapter
->hw
;
323 ew32(IMS
, IMS_ENABLE_MASK
);
327 static void e1000_update_mng_vlan(struct e1000_adapter
*adapter
)
329 struct e1000_hw
*hw
= &adapter
->hw
;
330 struct net_device
*netdev
= adapter
->netdev
;
331 u16 vid
= hw
->mng_cookie
.vlan_id
;
332 u16 old_vid
= adapter
->mng_vlan_id
;
334 if (!e1000_vlan_used(adapter
))
337 if (!test_bit(vid
, adapter
->active_vlans
)) {
338 if (hw
->mng_cookie
.status
&
339 E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT
) {
340 e1000_vlan_rx_add_vid(netdev
, vid
);
341 adapter
->mng_vlan_id
= vid
;
343 adapter
->mng_vlan_id
= E1000_MNG_VLAN_NONE
;
345 if ((old_vid
!= (u16
)E1000_MNG_VLAN_NONE
) &&
347 !test_bit(old_vid
, adapter
->active_vlans
))
348 e1000_vlan_rx_kill_vid(netdev
, old_vid
);
350 adapter
->mng_vlan_id
= vid
;
354 static void e1000_init_manageability(struct e1000_adapter
*adapter
)
356 struct e1000_hw
*hw
= &adapter
->hw
;
358 if (adapter
->en_mng_pt
) {
359 u32 manc
= er32(MANC
);
361 /* disable hardware interception of ARP */
362 manc
&= ~(E1000_MANC_ARP_EN
);
368 static void e1000_release_manageability(struct e1000_adapter
*adapter
)
370 struct e1000_hw
*hw
= &adapter
->hw
;
372 if (adapter
->en_mng_pt
) {
373 u32 manc
= er32(MANC
);
375 /* re-enable hardware interception of ARP */
376 manc
|= E1000_MANC_ARP_EN
;
383 * e1000_configure - configure the hardware for RX and TX
384 * @adapter = private board structure
386 static void e1000_configure(struct e1000_adapter
*adapter
)
388 struct net_device
*netdev
= adapter
->netdev
;
391 e1000_set_rx_mode(netdev
);
393 e1000_restore_vlan(adapter
);
394 e1000_init_manageability(adapter
);
396 e1000_configure_tx(adapter
);
397 e1000_setup_rctl(adapter
);
398 e1000_configure_rx(adapter
);
399 /* call E1000_DESC_UNUSED which always leaves
400 * at least 1 descriptor unused to make sure
401 * next_to_use != next_to_clean */
402 for (i
= 0; i
< adapter
->num_rx_queues
; i
++) {
403 struct e1000_rx_ring
*ring
= &adapter
->rx_ring
[i
];
404 adapter
->alloc_rx_buf(adapter
, ring
,
405 E1000_DESC_UNUSED(ring
));
409 int e1000_up(struct e1000_adapter
*adapter
)
411 struct e1000_hw
*hw
= &adapter
->hw
;
413 /* hardware has been reset, we need to reload some things */
414 e1000_configure(adapter
);
416 clear_bit(__E1000_DOWN
, &adapter
->flags
);
418 napi_enable(&adapter
->napi
);
420 e1000_irq_enable(adapter
);
422 netif_wake_queue(adapter
->netdev
);
424 /* fire a link change interrupt to start the watchdog */
425 ew32(ICS
, E1000_ICS_LSC
);
430 * e1000_power_up_phy - restore link in case the phy was powered down
431 * @adapter: address of board private structure
433 * The phy may be powered down to save power and turn off link when the
434 * driver is unloaded and wake on lan is not enabled (among others)
435 * *** this routine MUST be followed by a call to e1000_reset ***
439 void e1000_power_up_phy(struct e1000_adapter
*adapter
)
441 struct e1000_hw
*hw
= &adapter
->hw
;
444 /* Just clear the power down bit to wake the phy back up */
445 if (hw
->media_type
== e1000_media_type_copper
) {
446 /* according to the manual, the phy will retain its
447 * settings across a power-down/up cycle */
448 e1000_read_phy_reg(hw
, PHY_CTRL
, &mii_reg
);
449 mii_reg
&= ~MII_CR_POWER_DOWN
;
450 e1000_write_phy_reg(hw
, PHY_CTRL
, mii_reg
);
454 static void e1000_power_down_phy(struct e1000_adapter
*adapter
)
456 struct e1000_hw
*hw
= &adapter
->hw
;
458 /* Power down the PHY so no link is implied when interface is down *
459 * The PHY cannot be powered down if any of the following is true *
462 * (c) SoL/IDER session is active */
463 if (!adapter
->wol
&& hw
->mac_type
>= e1000_82540
&&
464 hw
->media_type
== e1000_media_type_copper
) {
467 switch (hw
->mac_type
) {
470 case e1000_82545_rev_3
:
473 case e1000_82546_rev_3
:
475 case e1000_82541_rev_2
:
477 case e1000_82547_rev_2
:
478 if (er32(MANC
) & E1000_MANC_SMBUS_EN
)
484 e1000_read_phy_reg(hw
, PHY_CTRL
, &mii_reg
);
485 mii_reg
|= MII_CR_POWER_DOWN
;
486 e1000_write_phy_reg(hw
, PHY_CTRL
, mii_reg
);
493 static void e1000_down_and_stop(struct e1000_adapter
*adapter
)
495 set_bit(__E1000_DOWN
, &adapter
->flags
);
496 cancel_work_sync(&adapter
->reset_task
);
497 cancel_delayed_work_sync(&adapter
->watchdog_task
);
498 cancel_delayed_work_sync(&adapter
->phy_info_task
);
499 cancel_delayed_work_sync(&adapter
->fifo_stall_task
);
502 void e1000_down(struct e1000_adapter
*adapter
)
504 struct e1000_hw
*hw
= &adapter
->hw
;
505 struct net_device
*netdev
= adapter
->netdev
;
509 /* disable receives in the hardware */
511 ew32(RCTL
, rctl
& ~E1000_RCTL_EN
);
512 /* flush and sleep below */
514 netif_tx_disable(netdev
);
516 /* disable transmits in the hardware */
518 tctl
&= ~E1000_TCTL_EN
;
520 /* flush both disables and wait for them to finish */
524 napi_disable(&adapter
->napi
);
526 e1000_irq_disable(adapter
);
529 * Setting DOWN must be after irq_disable to prevent
530 * a screaming interrupt. Setting DOWN also prevents
531 * tasks from rescheduling.
533 e1000_down_and_stop(adapter
);
535 adapter
->link_speed
= 0;
536 adapter
->link_duplex
= 0;
537 netif_carrier_off(netdev
);
539 e1000_reset(adapter
);
540 e1000_clean_all_tx_rings(adapter
);
541 e1000_clean_all_rx_rings(adapter
);
544 static void e1000_reinit_safe(struct e1000_adapter
*adapter
)
546 while (test_and_set_bit(__E1000_RESETTING
, &adapter
->flags
))
548 mutex_lock(&adapter
->mutex
);
551 mutex_unlock(&adapter
->mutex
);
552 clear_bit(__E1000_RESETTING
, &adapter
->flags
);
555 void e1000_reinit_locked(struct e1000_adapter
*adapter
)
557 /* if rtnl_lock is not held the call path is bogus */
559 WARN_ON(in_interrupt());
560 while (test_and_set_bit(__E1000_RESETTING
, &adapter
->flags
))
564 clear_bit(__E1000_RESETTING
, &adapter
->flags
);
567 void e1000_reset(struct e1000_adapter
*adapter
)
569 struct e1000_hw
*hw
= &adapter
->hw
;
570 u32 pba
= 0, tx_space
, min_tx_space
, min_rx_space
;
571 bool legacy_pba_adjust
= false;
574 /* Repartition Pba for greater than 9k mtu
575 * To take effect CTRL.RST is required.
578 switch (hw
->mac_type
) {
579 case e1000_82542_rev2_0
:
580 case e1000_82542_rev2_1
:
585 case e1000_82541_rev_2
:
586 legacy_pba_adjust
= true;
590 case e1000_82545_rev_3
:
593 case e1000_82546_rev_3
:
597 case e1000_82547_rev_2
:
598 legacy_pba_adjust
= true;
601 case e1000_undefined
:
606 if (legacy_pba_adjust
) {
607 if (hw
->max_frame_size
> E1000_RXBUFFER_8192
)
608 pba
-= 8; /* allocate more FIFO for Tx */
610 if (hw
->mac_type
== e1000_82547
) {
611 adapter
->tx_fifo_head
= 0;
612 adapter
->tx_head_addr
= pba
<< E1000_TX_HEAD_ADDR_SHIFT
;
613 adapter
->tx_fifo_size
=
614 (E1000_PBA_40K
- pba
) << E1000_PBA_BYTES_SHIFT
;
615 atomic_set(&adapter
->tx_fifo_stall
, 0);
617 } else if (hw
->max_frame_size
> ETH_FRAME_LEN
+ ETH_FCS_LEN
) {
618 /* adjust PBA for jumbo frames */
621 /* To maintain wire speed transmits, the Tx FIFO should be
622 * large enough to accommodate two full transmit packets,
623 * rounded up to the next 1KB and expressed in KB. Likewise,
624 * the Rx FIFO should be large enough to accommodate at least
625 * one full receive packet and is similarly rounded up and
626 * expressed in KB. */
628 /* upper 16 bits has Tx packet buffer allocation size in KB */
629 tx_space
= pba
>> 16;
630 /* lower 16 bits has Rx packet buffer allocation size in KB */
633 * the tx fifo also stores 16 bytes of information about the tx
634 * but don't include ethernet FCS because hardware appends it
636 min_tx_space
= (hw
->max_frame_size
+
637 sizeof(struct e1000_tx_desc
) -
639 min_tx_space
= ALIGN(min_tx_space
, 1024);
641 /* software strips receive CRC, so leave room for it */
642 min_rx_space
= hw
->max_frame_size
;
643 min_rx_space
= ALIGN(min_rx_space
, 1024);
646 /* If current Tx allocation is less than the min Tx FIFO size,
647 * and the min Tx FIFO size is less than the current Rx FIFO
648 * allocation, take space away from current Rx allocation */
649 if (tx_space
< min_tx_space
&&
650 ((min_tx_space
- tx_space
) < pba
)) {
651 pba
= pba
- (min_tx_space
- tx_space
);
653 /* PCI/PCIx hardware has PBA alignment constraints */
654 switch (hw
->mac_type
) {
655 case e1000_82545
... e1000_82546_rev_3
:
656 pba
&= ~(E1000_PBA_8K
- 1);
662 /* if short on rx space, rx wins and must trump tx
663 * adjustment or use Early Receive if available */
664 if (pba
< min_rx_space
)
672 * flow control settings:
673 * The high water mark must be low enough to fit one full frame
674 * (or the size used for early receive) above it in the Rx FIFO.
675 * Set it to the lower of:
676 * - 90% of the Rx FIFO size, and
677 * - the full Rx FIFO size minus the early receive size (for parts
678 * with ERT support assuming ERT set to E1000_ERT_2048), or
679 * - the full Rx FIFO size minus one full frame
681 hwm
= min(((pba
<< 10) * 9 / 10),
682 ((pba
<< 10) - hw
->max_frame_size
));
684 hw
->fc_high_water
= hwm
& 0xFFF8; /* 8-byte granularity */
685 hw
->fc_low_water
= hw
->fc_high_water
- 8;
686 hw
->fc_pause_time
= E1000_FC_PAUSE_TIME
;
688 hw
->fc
= hw
->original_fc
;
690 /* Allow time for pending master requests to run */
692 if (hw
->mac_type
>= e1000_82544
)
695 if (e1000_init_hw(hw
))
696 e_dev_err("Hardware Error\n");
697 e1000_update_mng_vlan(adapter
);
699 /* if (adapter->hwflags & HWFLAGS_PHY_PWR_BIT) { */
700 if (hw
->mac_type
>= e1000_82544
&&
702 hw
->autoneg_advertised
== ADVERTISE_1000_FULL
) {
703 u32 ctrl
= er32(CTRL
);
704 /* clear phy power management bit if we are in gig only mode,
705 * which if enabled will attempt negotiation to 100Mb, which
706 * can cause a loss of link at power off or driver unload */
707 ctrl
&= ~E1000_CTRL_SWDPIN3
;
711 /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
712 ew32(VET
, ETHERNET_IEEE_VLAN_TYPE
);
714 e1000_reset_adaptive(hw
);
715 e1000_phy_get_info(hw
, &adapter
->phy_info
);
717 e1000_release_manageability(adapter
);
721 * Dump the eeprom for users having checksum issues
723 static void e1000_dump_eeprom(struct e1000_adapter
*adapter
)
725 struct net_device
*netdev
= adapter
->netdev
;
726 struct ethtool_eeprom eeprom
;
727 const struct ethtool_ops
*ops
= netdev
->ethtool_ops
;
730 u16 csum_old
, csum_new
= 0;
732 eeprom
.len
= ops
->get_eeprom_len(netdev
);
735 data
= kmalloc(eeprom
.len
, GFP_KERNEL
);
739 ops
->get_eeprom(netdev
, &eeprom
, data
);
741 csum_old
= (data
[EEPROM_CHECKSUM_REG
* 2]) +
742 (data
[EEPROM_CHECKSUM_REG
* 2 + 1] << 8);
743 for (i
= 0; i
< EEPROM_CHECKSUM_REG
* 2; i
+= 2)
744 csum_new
+= data
[i
] + (data
[i
+ 1] << 8);
745 csum_new
= EEPROM_SUM
- csum_new
;
747 pr_err("/*********************/\n");
748 pr_err("Current EEPROM Checksum : 0x%04x\n", csum_old
);
749 pr_err("Calculated : 0x%04x\n", csum_new
);
751 pr_err("Offset Values\n");
752 pr_err("======== ======\n");
753 print_hex_dump(KERN_ERR
, "", DUMP_PREFIX_OFFSET
, 16, 1, data
, 128, 0);
755 pr_err("Include this output when contacting your support provider.\n");
756 pr_err("This is not a software error! Something bad happened to\n");
757 pr_err("your hardware or EEPROM image. Ignoring this problem could\n");
758 pr_err("result in further problems, possibly loss of data,\n");
759 pr_err("corruption or system hangs!\n");
760 pr_err("The MAC Address will be reset to 00:00:00:00:00:00,\n");
761 pr_err("which is invalid and requires you to set the proper MAC\n");
762 pr_err("address manually before continuing to enable this network\n");
763 pr_err("device. Please inspect the EEPROM dump and report the\n");
764 pr_err("issue to your hardware vendor or Intel Customer Support.\n");
765 pr_err("/*********************/\n");
771 * e1000_is_need_ioport - determine if an adapter needs ioport resources or not
772 * @pdev: PCI device information struct
774 * Return true if an adapter needs ioport resources
776 static int e1000_is_need_ioport(struct pci_dev
*pdev
)
778 switch (pdev
->device
) {
779 case E1000_DEV_ID_82540EM
:
780 case E1000_DEV_ID_82540EM_LOM
:
781 case E1000_DEV_ID_82540EP
:
782 case E1000_DEV_ID_82540EP_LOM
:
783 case E1000_DEV_ID_82540EP_LP
:
784 case E1000_DEV_ID_82541EI
:
785 case E1000_DEV_ID_82541EI_MOBILE
:
786 case E1000_DEV_ID_82541ER
:
787 case E1000_DEV_ID_82541ER_LOM
:
788 case E1000_DEV_ID_82541GI
:
789 case E1000_DEV_ID_82541GI_LF
:
790 case E1000_DEV_ID_82541GI_MOBILE
:
791 case E1000_DEV_ID_82544EI_COPPER
:
792 case E1000_DEV_ID_82544EI_FIBER
:
793 case E1000_DEV_ID_82544GC_COPPER
:
794 case E1000_DEV_ID_82544GC_LOM
:
795 case E1000_DEV_ID_82545EM_COPPER
:
796 case E1000_DEV_ID_82545EM_FIBER
:
797 case E1000_DEV_ID_82546EB_COPPER
:
798 case E1000_DEV_ID_82546EB_FIBER
:
799 case E1000_DEV_ID_82546EB_QUAD_COPPER
:
806 static netdev_features_t
e1000_fix_features(struct net_device
*netdev
,
807 netdev_features_t features
)
810 * Since there is no support for separate rx/tx vlan accel
811 * enable/disable make sure tx flag is always in same state as rx.
813 if (features
& NETIF_F_HW_VLAN_RX
)
814 features
|= NETIF_F_HW_VLAN_TX
;
816 features
&= ~NETIF_F_HW_VLAN_TX
;
821 static int e1000_set_features(struct net_device
*netdev
,
822 netdev_features_t features
)
824 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
825 netdev_features_t changed
= features
^ netdev
->features
;
827 if (changed
& NETIF_F_HW_VLAN_RX
)
828 e1000_vlan_mode(netdev
, features
);
830 if (!(changed
& NETIF_F_RXCSUM
))
833 adapter
->rx_csum
= !!(features
& NETIF_F_RXCSUM
);
835 if (netif_running(netdev
))
836 e1000_reinit_locked(adapter
);
838 e1000_reset(adapter
);
843 static const struct net_device_ops e1000_netdev_ops
= {
844 .ndo_open
= e1000_open
,
845 .ndo_stop
= e1000_close
,
846 .ndo_start_xmit
= e1000_xmit_frame
,
847 .ndo_get_stats
= e1000_get_stats
,
848 .ndo_set_rx_mode
= e1000_set_rx_mode
,
849 .ndo_set_mac_address
= e1000_set_mac
,
850 .ndo_tx_timeout
= e1000_tx_timeout
,
851 .ndo_change_mtu
= e1000_change_mtu
,
852 .ndo_do_ioctl
= e1000_ioctl
,
853 .ndo_validate_addr
= eth_validate_addr
,
854 .ndo_vlan_rx_add_vid
= e1000_vlan_rx_add_vid
,
855 .ndo_vlan_rx_kill_vid
= e1000_vlan_rx_kill_vid
,
856 #ifdef CONFIG_NET_POLL_CONTROLLER
857 .ndo_poll_controller
= e1000_netpoll
,
859 .ndo_fix_features
= e1000_fix_features
,
860 .ndo_set_features
= e1000_set_features
,
864 * e1000_init_hw_struct - initialize members of hw struct
865 * @adapter: board private struct
866 * @hw: structure used by e1000_hw.c
868 * Factors out initialization of the e1000_hw struct to its own function
869 * that can be called very early at init (just after struct allocation).
870 * Fields are initialized based on PCI device information and
871 * OS network device settings (MTU size).
872 * Returns negative error codes if MAC type setup fails.
874 static int e1000_init_hw_struct(struct e1000_adapter
*adapter
,
877 struct pci_dev
*pdev
= adapter
->pdev
;
879 /* PCI config space info */
880 hw
->vendor_id
= pdev
->vendor
;
881 hw
->device_id
= pdev
->device
;
882 hw
->subsystem_vendor_id
= pdev
->subsystem_vendor
;
883 hw
->subsystem_id
= pdev
->subsystem_device
;
884 hw
->revision_id
= pdev
->revision
;
886 pci_read_config_word(pdev
, PCI_COMMAND
, &hw
->pci_cmd_word
);
888 hw
->max_frame_size
= adapter
->netdev
->mtu
+
889 ENET_HEADER_SIZE
+ ETHERNET_FCS_SIZE
;
890 hw
->min_frame_size
= MINIMUM_ETHERNET_FRAME_SIZE
;
892 /* identify the MAC */
893 if (e1000_set_mac_type(hw
)) {
894 e_err(probe
, "Unknown MAC Type\n");
898 switch (hw
->mac_type
) {
903 case e1000_82541_rev_2
:
904 case e1000_82547_rev_2
:
905 hw
->phy_init_script
= 1;
909 e1000_set_media_type(hw
);
910 e1000_get_bus_info(hw
);
912 hw
->wait_autoneg_complete
= false;
913 hw
->tbi_compatibility_en
= true;
914 hw
->adaptive_ifs
= true;
918 if (hw
->media_type
== e1000_media_type_copper
) {
919 hw
->mdix
= AUTO_ALL_MODES
;
920 hw
->disable_polarity_correction
= false;
921 hw
->master_slave
= E1000_MASTER_SLAVE
;
928 * e1000_probe - Device Initialization Routine
929 * @pdev: PCI device information struct
930 * @ent: entry in e1000_pci_tbl
932 * Returns 0 on success, negative on failure
934 * e1000_probe initializes an adapter identified by a pci_dev structure.
935 * The OS initialization, configuring of the adapter private structure,
936 * and a hardware reset occur.
938 static int __devinit
e1000_probe(struct pci_dev
*pdev
,
939 const struct pci_device_id
*ent
)
941 struct net_device
*netdev
;
942 struct e1000_adapter
*adapter
;
945 static int cards_found
= 0;
946 static int global_quad_port_a
= 0; /* global ksp3 port a indication */
947 int i
, err
, pci_using_dac
;
950 u16 eeprom_apme_mask
= E1000_EEPROM_APME
;
951 int bars
, need_ioport
;
953 /* do not allocate ioport bars when not needed */
954 need_ioport
= e1000_is_need_ioport(pdev
);
956 bars
= pci_select_bars(pdev
, IORESOURCE_MEM
| IORESOURCE_IO
);
957 err
= pci_enable_device(pdev
);
959 bars
= pci_select_bars(pdev
, IORESOURCE_MEM
);
960 err
= pci_enable_device_mem(pdev
);
965 err
= pci_request_selected_regions(pdev
, bars
, e1000_driver_name
);
969 pci_set_master(pdev
);
970 err
= pci_save_state(pdev
);
972 goto err_alloc_etherdev
;
975 netdev
= alloc_etherdev(sizeof(struct e1000_adapter
));
977 goto err_alloc_etherdev
;
979 SET_NETDEV_DEV(netdev
, &pdev
->dev
);
981 pci_set_drvdata(pdev
, netdev
);
982 adapter
= netdev_priv(netdev
);
983 adapter
->netdev
= netdev
;
984 adapter
->pdev
= pdev
;
985 adapter
->msg_enable
= netif_msg_init(debug
, DEFAULT_MSG_ENABLE
);
986 adapter
->bars
= bars
;
987 adapter
->need_ioport
= need_ioport
;
993 hw
->hw_addr
= pci_ioremap_bar(pdev
, BAR_0
);
997 if (adapter
->need_ioport
) {
998 for (i
= BAR_1
; i
<= BAR_5
; i
++) {
999 if (pci_resource_len(pdev
, i
) == 0)
1001 if (pci_resource_flags(pdev
, i
) & IORESOURCE_IO
) {
1002 hw
->io_base
= pci_resource_start(pdev
, i
);
1008 /* make ready for any if (hw->...) below */
1009 err
= e1000_init_hw_struct(adapter
, hw
);
1014 * there is a workaround being applied below that limits
1015 * 64-bit DMA addresses to 64-bit hardware. There are some
1016 * 32-bit adapters that Tx hang when given 64-bit DMA addresses
1019 if ((hw
->bus_type
== e1000_bus_type_pcix
) &&
1020 !dma_set_mask(&pdev
->dev
, DMA_BIT_MASK(64))) {
1022 * according to DMA-API-HOWTO, coherent calls will always
1023 * succeed if the set call did
1025 dma_set_coherent_mask(&pdev
->dev
, DMA_BIT_MASK(64));
1028 err
= dma_set_mask(&pdev
->dev
, DMA_BIT_MASK(32));
1030 pr_err("No usable DMA config, aborting\n");
1033 dma_set_coherent_mask(&pdev
->dev
, DMA_BIT_MASK(32));
1036 netdev
->netdev_ops
= &e1000_netdev_ops
;
1037 e1000_set_ethtool_ops(netdev
);
1038 netdev
->watchdog_timeo
= 5 * HZ
;
1039 netif_napi_add(netdev
, &adapter
->napi
, e1000_clean
, 64);
1041 strncpy(netdev
->name
, pci_name(pdev
), sizeof(netdev
->name
) - 1);
1043 adapter
->bd_number
= cards_found
;
1045 /* setup the private structure */
1047 err
= e1000_sw_init(adapter
);
1052 if (hw
->mac_type
== e1000_ce4100
) {
1053 hw
->ce4100_gbe_mdio_base_virt
=
1054 ioremap(pci_resource_start(pdev
, BAR_1
),
1055 pci_resource_len(pdev
, BAR_1
));
1057 if (!hw
->ce4100_gbe_mdio_base_virt
)
1058 goto err_mdio_ioremap
;
1061 if (hw
->mac_type
>= e1000_82543
) {
1062 netdev
->hw_features
= NETIF_F_SG
|
1065 netdev
->features
= NETIF_F_HW_VLAN_TX
|
1066 NETIF_F_HW_VLAN_FILTER
;
1069 if ((hw
->mac_type
>= e1000_82544
) &&
1070 (hw
->mac_type
!= e1000_82547
))
1071 netdev
->hw_features
|= NETIF_F_TSO
;
1073 netdev
->priv_flags
|= IFF_SUPP_NOFCS
;
1075 netdev
->features
|= netdev
->hw_features
;
1076 netdev
->hw_features
|= NETIF_F_RXCSUM
;
1077 netdev
->hw_features
|= NETIF_F_RXFCS
;
1079 if (pci_using_dac
) {
1080 netdev
->features
|= NETIF_F_HIGHDMA
;
1081 netdev
->vlan_features
|= NETIF_F_HIGHDMA
;
1084 netdev
->vlan_features
|= NETIF_F_TSO
;
1085 netdev
->vlan_features
|= NETIF_F_HW_CSUM
;
1086 netdev
->vlan_features
|= NETIF_F_SG
;
1088 netdev
->priv_flags
|= IFF_UNICAST_FLT
;
1090 adapter
->en_mng_pt
= e1000_enable_mng_pass_thru(hw
);
1092 /* initialize eeprom parameters */
1093 if (e1000_init_eeprom_params(hw
)) {
1094 e_err(probe
, "EEPROM initialization failed\n");
1098 /* before reading the EEPROM, reset the controller to
1099 * put the device in a known good starting state */
1103 /* make sure the EEPROM is good */
1104 if (e1000_validate_eeprom_checksum(hw
) < 0) {
1105 e_err(probe
, "The EEPROM Checksum Is Not Valid\n");
1106 e1000_dump_eeprom(adapter
);
1108 * set MAC address to all zeroes to invalidate and temporary
1109 * disable this device for the user. This blocks regular
1110 * traffic while still permitting ethtool ioctls from reaching
1111 * the hardware as well as allowing the user to run the
1112 * interface after manually setting a hw addr using
1115 memset(hw
->mac_addr
, 0, netdev
->addr_len
);
1117 /* copy the MAC address out of the EEPROM */
1118 if (e1000_read_mac_addr(hw
))
1119 e_err(probe
, "EEPROM Read Error\n");
1121 /* don't block initalization here due to bad MAC address */
1122 memcpy(netdev
->dev_addr
, hw
->mac_addr
, netdev
->addr_len
);
1123 memcpy(netdev
->perm_addr
, hw
->mac_addr
, netdev
->addr_len
);
1125 if (!is_valid_ether_addr(netdev
->perm_addr
))
1126 e_err(probe
, "Invalid MAC Address\n");
1129 INIT_DELAYED_WORK(&adapter
->watchdog_task
, e1000_watchdog
);
1130 INIT_DELAYED_WORK(&adapter
->fifo_stall_task
,
1131 e1000_82547_tx_fifo_stall_task
);
1132 INIT_DELAYED_WORK(&adapter
->phy_info_task
, e1000_update_phy_info_task
);
1133 INIT_WORK(&adapter
->reset_task
, e1000_reset_task
);
1135 e1000_check_options(adapter
);
1137 /* Initial Wake on LAN setting
1138 * If APM wake is enabled in the EEPROM,
1139 * enable the ACPI Magic Packet filter
1142 switch (hw
->mac_type
) {
1143 case e1000_82542_rev2_0
:
1144 case e1000_82542_rev2_1
:
1148 e1000_read_eeprom(hw
,
1149 EEPROM_INIT_CONTROL2_REG
, 1, &eeprom_data
);
1150 eeprom_apme_mask
= E1000_EEPROM_82544_APM
;
1153 case e1000_82546_rev_3
:
1154 if (er32(STATUS
) & E1000_STATUS_FUNC_1
){
1155 e1000_read_eeprom(hw
,
1156 EEPROM_INIT_CONTROL3_PORT_B
, 1, &eeprom_data
);
1161 e1000_read_eeprom(hw
,
1162 EEPROM_INIT_CONTROL3_PORT_A
, 1, &eeprom_data
);
1165 if (eeprom_data
& eeprom_apme_mask
)
1166 adapter
->eeprom_wol
|= E1000_WUFC_MAG
;
1168 /* now that we have the eeprom settings, apply the special cases
1169 * where the eeprom may be wrong or the board simply won't support
1170 * wake on lan on a particular port */
1171 switch (pdev
->device
) {
1172 case E1000_DEV_ID_82546GB_PCIE
:
1173 adapter
->eeprom_wol
= 0;
1175 case E1000_DEV_ID_82546EB_FIBER
:
1176 case E1000_DEV_ID_82546GB_FIBER
:
1177 /* Wake events only supported on port A for dual fiber
1178 * regardless of eeprom setting */
1179 if (er32(STATUS
) & E1000_STATUS_FUNC_1
)
1180 adapter
->eeprom_wol
= 0;
1182 case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3
:
1183 /* if quad port adapter, disable WoL on all but port A */
1184 if (global_quad_port_a
!= 0)
1185 adapter
->eeprom_wol
= 0;
1187 adapter
->quad_port_a
= true;
1188 /* Reset for multiple quad port adapters */
1189 if (++global_quad_port_a
== 4)
1190 global_quad_port_a
= 0;
1194 /* initialize the wol settings based on the eeprom settings */
1195 adapter
->wol
= adapter
->eeprom_wol
;
1196 device_set_wakeup_enable(&adapter
->pdev
->dev
, adapter
->wol
);
1198 /* Auto detect PHY address */
1199 if (hw
->mac_type
== e1000_ce4100
) {
1200 for (i
= 0; i
< 32; i
++) {
1202 e1000_read_phy_reg(hw
, PHY_ID2
, &tmp
);
1203 if (tmp
== 0 || tmp
== 0xFF) {
1212 /* reset the hardware with the new settings */
1213 e1000_reset(adapter
);
1215 strcpy(netdev
->name
, "eth%d");
1216 err
= register_netdev(netdev
);
1220 e1000_vlan_filter_on_off(adapter
, false);
1222 /* print bus type/speed/width info */
1223 e_info(probe
, "(PCI%s:%dMHz:%d-bit) %pM\n",
1224 ((hw
->bus_type
== e1000_bus_type_pcix
) ? "-X" : ""),
1225 ((hw
->bus_speed
== e1000_bus_speed_133
) ? 133 :
1226 (hw
->bus_speed
== e1000_bus_speed_120
) ? 120 :
1227 (hw
->bus_speed
== e1000_bus_speed_100
) ? 100 :
1228 (hw
->bus_speed
== e1000_bus_speed_66
) ? 66 : 33),
1229 ((hw
->bus_width
== e1000_bus_width_64
) ? 64 : 32),
1232 /* carrier off reporting is important to ethtool even BEFORE open */
1233 netif_carrier_off(netdev
);
1235 e_info(probe
, "Intel(R) PRO/1000 Network Connection\n");
1242 e1000_phy_hw_reset(hw
);
1244 if (hw
->flash_address
)
1245 iounmap(hw
->flash_address
);
1246 kfree(adapter
->tx_ring
);
1247 kfree(adapter
->rx_ring
);
1251 iounmap(hw
->ce4100_gbe_mdio_base_virt
);
1252 iounmap(hw
->hw_addr
);
1254 free_netdev(netdev
);
1256 pci_release_selected_regions(pdev
, bars
);
1258 pci_disable_device(pdev
);
1263 * e1000_remove - Device Removal Routine
1264 * @pdev: PCI device information struct
1266 * e1000_remove is called by the PCI subsystem to alert the driver
1267 * that it should release a PCI device. The could be caused by a
1268 * Hot-Plug event, or because the driver is going to be removed from
1272 static void __devexit
e1000_remove(struct pci_dev
*pdev
)
1274 struct net_device
*netdev
= pci_get_drvdata(pdev
);
1275 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
1276 struct e1000_hw
*hw
= &adapter
->hw
;
1278 e1000_down_and_stop(adapter
);
1279 e1000_release_manageability(adapter
);
1281 unregister_netdev(netdev
);
1283 e1000_phy_hw_reset(hw
);
1285 kfree(adapter
->tx_ring
);
1286 kfree(adapter
->rx_ring
);
1288 if (hw
->mac_type
== e1000_ce4100
)
1289 iounmap(hw
->ce4100_gbe_mdio_base_virt
);
1290 iounmap(hw
->hw_addr
);
1291 if (hw
->flash_address
)
1292 iounmap(hw
->flash_address
);
1293 pci_release_selected_regions(pdev
, adapter
->bars
);
1295 free_netdev(netdev
);
1297 pci_disable_device(pdev
);
1301 * e1000_sw_init - Initialize general software structures (struct e1000_adapter)
1302 * @adapter: board private structure to initialize
1304 * e1000_sw_init initializes the Adapter private data structure.
1305 * e1000_init_hw_struct MUST be called before this function
1308 static int __devinit
e1000_sw_init(struct e1000_adapter
*adapter
)
1310 adapter
->rx_buffer_len
= MAXIMUM_ETHERNET_VLAN_SIZE
;
1312 adapter
->num_tx_queues
= 1;
1313 adapter
->num_rx_queues
= 1;
1315 if (e1000_alloc_queues(adapter
)) {
1316 e_err(probe
, "Unable to allocate memory for queues\n");
1320 /* Explicitly disable IRQ since the NIC can be in any state. */
1321 e1000_irq_disable(adapter
);
1323 spin_lock_init(&adapter
->stats_lock
);
1324 mutex_init(&adapter
->mutex
);
1326 set_bit(__E1000_DOWN
, &adapter
->flags
);
1332 * e1000_alloc_queues - Allocate memory for all rings
1333 * @adapter: board private structure to initialize
1335 * We allocate one ring per queue at run-time since we don't know the
1336 * number of queues at compile-time.
1339 static int __devinit
e1000_alloc_queues(struct e1000_adapter
*adapter
)
1341 adapter
->tx_ring
= kcalloc(adapter
->num_tx_queues
,
1342 sizeof(struct e1000_tx_ring
), GFP_KERNEL
);
1343 if (!adapter
->tx_ring
)
1346 adapter
->rx_ring
= kcalloc(adapter
->num_rx_queues
,
1347 sizeof(struct e1000_rx_ring
), GFP_KERNEL
);
1348 if (!adapter
->rx_ring
) {
1349 kfree(adapter
->tx_ring
);
1353 return E1000_SUCCESS
;
1357 * e1000_open - Called when a network interface is made active
1358 * @netdev: network interface device structure
1360 * Returns 0 on success, negative value on failure
1362 * The open entry point is called when a network interface is made
1363 * active by the system (IFF_UP). At this point all resources needed
1364 * for transmit and receive operations are allocated, the interrupt
1365 * handler is registered with the OS, the watchdog task is started,
1366 * and the stack is notified that the interface is ready.
1369 static int e1000_open(struct net_device
*netdev
)
1371 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
1372 struct e1000_hw
*hw
= &adapter
->hw
;
1375 /* disallow open during test */
1376 if (test_bit(__E1000_TESTING
, &adapter
->flags
))
1379 netif_carrier_off(netdev
);
1381 /* allocate transmit descriptors */
1382 err
= e1000_setup_all_tx_resources(adapter
);
1386 /* allocate receive descriptors */
1387 err
= e1000_setup_all_rx_resources(adapter
);
1391 e1000_power_up_phy(adapter
);
1393 adapter
->mng_vlan_id
= E1000_MNG_VLAN_NONE
;
1394 if ((hw
->mng_cookie
.status
&
1395 E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT
)) {
1396 e1000_update_mng_vlan(adapter
);
1399 /* before we allocate an interrupt, we must be ready to handle it.
1400 * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
1401 * as soon as we call pci_request_irq, so we have to setup our
1402 * clean_rx handler before we do so. */
1403 e1000_configure(adapter
);
1405 err
= e1000_request_irq(adapter
);
1409 /* From here on the code is the same as e1000_up() */
1410 clear_bit(__E1000_DOWN
, &adapter
->flags
);
1412 napi_enable(&adapter
->napi
);
1414 e1000_irq_enable(adapter
);
1416 netif_start_queue(netdev
);
1418 /* fire a link status change interrupt to start the watchdog */
1419 ew32(ICS
, E1000_ICS_LSC
);
1421 return E1000_SUCCESS
;
1424 e1000_power_down_phy(adapter
);
1425 e1000_free_all_rx_resources(adapter
);
1427 e1000_free_all_tx_resources(adapter
);
1429 e1000_reset(adapter
);
1435 * e1000_close - Disables a network interface
1436 * @netdev: network interface device structure
1438 * Returns 0, this is not allowed to fail
1440 * The close entry point is called when an interface is de-activated
1441 * by the OS. The hardware is still under the drivers control, but
1442 * needs to be disabled. A global MAC reset is issued to stop the
1443 * hardware, and all transmit and receive resources are freed.
1446 static int e1000_close(struct net_device
*netdev
)
1448 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
1449 struct e1000_hw
*hw
= &adapter
->hw
;
1451 WARN_ON(test_bit(__E1000_RESETTING
, &adapter
->flags
));
1452 e1000_down(adapter
);
1453 e1000_power_down_phy(adapter
);
1454 e1000_free_irq(adapter
);
1456 e1000_free_all_tx_resources(adapter
);
1457 e1000_free_all_rx_resources(adapter
);
1459 /* kill manageability vlan ID if supported, but not if a vlan with
1460 * the same ID is registered on the host OS (let 8021q kill it) */
1461 if ((hw
->mng_cookie
.status
&
1462 E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT
) &&
1463 !test_bit(adapter
->mng_vlan_id
, adapter
->active_vlans
)) {
1464 e1000_vlan_rx_kill_vid(netdev
, adapter
->mng_vlan_id
);
1471 * e1000_check_64k_bound - check that memory doesn't cross 64kB boundary
1472 * @adapter: address of board private structure
1473 * @start: address of beginning of memory
1474 * @len: length of memory
1476 static bool e1000_check_64k_bound(struct e1000_adapter
*adapter
, void *start
,
1479 struct e1000_hw
*hw
= &adapter
->hw
;
1480 unsigned long begin
= (unsigned long)start
;
1481 unsigned long end
= begin
+ len
;
1483 /* First rev 82545 and 82546 need to not allow any memory
1484 * write location to cross 64k boundary due to errata 23 */
1485 if (hw
->mac_type
== e1000_82545
||
1486 hw
->mac_type
== e1000_ce4100
||
1487 hw
->mac_type
== e1000_82546
) {
1488 return ((begin
^ (end
- 1)) >> 16) != 0 ? false : true;
1495 * e1000_setup_tx_resources - allocate Tx resources (Descriptors)
1496 * @adapter: board private structure
1497 * @txdr: tx descriptor ring (for a specific queue) to setup
1499 * Return 0 on success, negative on failure
1502 static int e1000_setup_tx_resources(struct e1000_adapter
*adapter
,
1503 struct e1000_tx_ring
*txdr
)
1505 struct pci_dev
*pdev
= adapter
->pdev
;
1508 size
= sizeof(struct e1000_buffer
) * txdr
->count
;
1509 txdr
->buffer_info
= vzalloc(size
);
1510 if (!txdr
->buffer_info
) {
1511 e_err(probe
, "Unable to allocate memory for the Tx descriptor "
1516 /* round up to nearest 4K */
1518 txdr
->size
= txdr
->count
* sizeof(struct e1000_tx_desc
);
1519 txdr
->size
= ALIGN(txdr
->size
, 4096);
1521 txdr
->desc
= dma_alloc_coherent(&pdev
->dev
, txdr
->size
, &txdr
->dma
,
1525 vfree(txdr
->buffer_info
);
1526 e_err(probe
, "Unable to allocate memory for the Tx descriptor "
1531 /* Fix for errata 23, can't cross 64kB boundary */
1532 if (!e1000_check_64k_bound(adapter
, txdr
->desc
, txdr
->size
)) {
1533 void *olddesc
= txdr
->desc
;
1534 dma_addr_t olddma
= txdr
->dma
;
1535 e_err(tx_err
, "txdr align check failed: %u bytes at %p\n",
1536 txdr
->size
, txdr
->desc
);
1537 /* Try again, without freeing the previous */
1538 txdr
->desc
= dma_alloc_coherent(&pdev
->dev
, txdr
->size
,
1539 &txdr
->dma
, GFP_KERNEL
);
1540 /* Failed allocation, critical failure */
1542 dma_free_coherent(&pdev
->dev
, txdr
->size
, olddesc
,
1544 goto setup_tx_desc_die
;
1547 if (!e1000_check_64k_bound(adapter
, txdr
->desc
, txdr
->size
)) {
1549 dma_free_coherent(&pdev
->dev
, txdr
->size
, txdr
->desc
,
1551 dma_free_coherent(&pdev
->dev
, txdr
->size
, olddesc
,
1553 e_err(probe
, "Unable to allocate aligned memory "
1554 "for the transmit descriptor ring\n");
1555 vfree(txdr
->buffer_info
);
1558 /* Free old allocation, new allocation was successful */
1559 dma_free_coherent(&pdev
->dev
, txdr
->size
, olddesc
,
1563 memset(txdr
->desc
, 0, txdr
->size
);
1565 txdr
->next_to_use
= 0;
1566 txdr
->next_to_clean
= 0;
1572 * e1000_setup_all_tx_resources - wrapper to allocate Tx resources
1573 * (Descriptors) for all queues
1574 * @adapter: board private structure
1576 * Return 0 on success, negative on failure
1579 int e1000_setup_all_tx_resources(struct e1000_adapter
*adapter
)
1583 for (i
= 0; i
< adapter
->num_tx_queues
; i
++) {
1584 err
= e1000_setup_tx_resources(adapter
, &adapter
->tx_ring
[i
]);
1586 e_err(probe
, "Allocation for Tx Queue %u failed\n", i
);
1587 for (i
-- ; i
>= 0; i
--)
1588 e1000_free_tx_resources(adapter
,
1589 &adapter
->tx_ring
[i
]);
1598 * e1000_configure_tx - Configure 8254x Transmit Unit after Reset
1599 * @adapter: board private structure
1601 * Configure the Tx unit of the MAC after a reset.
1604 static void e1000_configure_tx(struct e1000_adapter
*adapter
)
1607 struct e1000_hw
*hw
= &adapter
->hw
;
1608 u32 tdlen
, tctl
, tipg
;
1611 /* Setup the HW Tx Head and Tail descriptor pointers */
1613 switch (adapter
->num_tx_queues
) {
1616 tdba
= adapter
->tx_ring
[0].dma
;
1617 tdlen
= adapter
->tx_ring
[0].count
*
1618 sizeof(struct e1000_tx_desc
);
1620 ew32(TDBAH
, (tdba
>> 32));
1621 ew32(TDBAL
, (tdba
& 0x00000000ffffffffULL
));
1624 adapter
->tx_ring
[0].tdh
= ((hw
->mac_type
>= e1000_82543
) ? E1000_TDH
: E1000_82542_TDH
);
1625 adapter
->tx_ring
[0].tdt
= ((hw
->mac_type
>= e1000_82543
) ? E1000_TDT
: E1000_82542_TDT
);
1629 /* Set the default values for the Tx Inter Packet Gap timer */
1630 if ((hw
->media_type
== e1000_media_type_fiber
||
1631 hw
->media_type
== e1000_media_type_internal_serdes
))
1632 tipg
= DEFAULT_82543_TIPG_IPGT_FIBER
;
1634 tipg
= DEFAULT_82543_TIPG_IPGT_COPPER
;
1636 switch (hw
->mac_type
) {
1637 case e1000_82542_rev2_0
:
1638 case e1000_82542_rev2_1
:
1639 tipg
= DEFAULT_82542_TIPG_IPGT
;
1640 ipgr1
= DEFAULT_82542_TIPG_IPGR1
;
1641 ipgr2
= DEFAULT_82542_TIPG_IPGR2
;
1644 ipgr1
= DEFAULT_82543_TIPG_IPGR1
;
1645 ipgr2
= DEFAULT_82543_TIPG_IPGR2
;
1648 tipg
|= ipgr1
<< E1000_TIPG_IPGR1_SHIFT
;
1649 tipg
|= ipgr2
<< E1000_TIPG_IPGR2_SHIFT
;
1652 /* Set the Tx Interrupt Delay register */
1654 ew32(TIDV
, adapter
->tx_int_delay
);
1655 if (hw
->mac_type
>= e1000_82540
)
1656 ew32(TADV
, adapter
->tx_abs_int_delay
);
1658 /* Program the Transmit Control Register */
1661 tctl
&= ~E1000_TCTL_CT
;
1662 tctl
|= E1000_TCTL_PSP
| E1000_TCTL_RTLC
|
1663 (E1000_COLLISION_THRESHOLD
<< E1000_CT_SHIFT
);
1665 e1000_config_collision_dist(hw
);
1667 /* Setup Transmit Descriptor Settings for eop descriptor */
1668 adapter
->txd_cmd
= E1000_TXD_CMD_EOP
| E1000_TXD_CMD_IFCS
;
1670 /* only set IDE if we are delaying interrupts using the timers */
1671 if (adapter
->tx_int_delay
)
1672 adapter
->txd_cmd
|= E1000_TXD_CMD_IDE
;
1674 if (hw
->mac_type
< e1000_82543
)
1675 adapter
->txd_cmd
|= E1000_TXD_CMD_RPS
;
1677 adapter
->txd_cmd
|= E1000_TXD_CMD_RS
;
1679 /* Cache if we're 82544 running in PCI-X because we'll
1680 * need this to apply a workaround later in the send path. */
1681 if (hw
->mac_type
== e1000_82544
&&
1682 hw
->bus_type
== e1000_bus_type_pcix
)
1683 adapter
->pcix_82544
= true;
1690 * e1000_setup_rx_resources - allocate Rx resources (Descriptors)
1691 * @adapter: board private structure
1692 * @rxdr: rx descriptor ring (for a specific queue) to setup
1694 * Returns 0 on success, negative on failure
1697 static int e1000_setup_rx_resources(struct e1000_adapter
*adapter
,
1698 struct e1000_rx_ring
*rxdr
)
1700 struct pci_dev
*pdev
= adapter
->pdev
;
1703 size
= sizeof(struct e1000_buffer
) * rxdr
->count
;
1704 rxdr
->buffer_info
= vzalloc(size
);
1705 if (!rxdr
->buffer_info
) {
1706 e_err(probe
, "Unable to allocate memory for the Rx descriptor "
1711 desc_len
= sizeof(struct e1000_rx_desc
);
1713 /* Round up to nearest 4K */
1715 rxdr
->size
= rxdr
->count
* desc_len
;
1716 rxdr
->size
= ALIGN(rxdr
->size
, 4096);
1718 rxdr
->desc
= dma_alloc_coherent(&pdev
->dev
, rxdr
->size
, &rxdr
->dma
,
1722 e_err(probe
, "Unable to allocate memory for the Rx descriptor "
1725 vfree(rxdr
->buffer_info
);
1729 /* Fix for errata 23, can't cross 64kB boundary */
1730 if (!e1000_check_64k_bound(adapter
, rxdr
->desc
, rxdr
->size
)) {
1731 void *olddesc
= rxdr
->desc
;
1732 dma_addr_t olddma
= rxdr
->dma
;
1733 e_err(rx_err
, "rxdr align check failed: %u bytes at %p\n",
1734 rxdr
->size
, rxdr
->desc
);
1735 /* Try again, without freeing the previous */
1736 rxdr
->desc
= dma_alloc_coherent(&pdev
->dev
, rxdr
->size
,
1737 &rxdr
->dma
, GFP_KERNEL
);
1738 /* Failed allocation, critical failure */
1740 dma_free_coherent(&pdev
->dev
, rxdr
->size
, olddesc
,
1742 e_err(probe
, "Unable to allocate memory for the Rx "
1743 "descriptor ring\n");
1744 goto setup_rx_desc_die
;
1747 if (!e1000_check_64k_bound(adapter
, rxdr
->desc
, rxdr
->size
)) {
1749 dma_free_coherent(&pdev
->dev
, rxdr
->size
, rxdr
->desc
,
1751 dma_free_coherent(&pdev
->dev
, rxdr
->size
, olddesc
,
1753 e_err(probe
, "Unable to allocate aligned memory for "
1754 "the Rx descriptor ring\n");
1755 goto setup_rx_desc_die
;
1757 /* Free old allocation, new allocation was successful */
1758 dma_free_coherent(&pdev
->dev
, rxdr
->size
, olddesc
,
1762 memset(rxdr
->desc
, 0, rxdr
->size
);
1764 rxdr
->next_to_clean
= 0;
1765 rxdr
->next_to_use
= 0;
1766 rxdr
->rx_skb_top
= NULL
;
1772 * e1000_setup_all_rx_resources - wrapper to allocate Rx resources
1773 * (Descriptors) for all queues
1774 * @adapter: board private structure
1776 * Return 0 on success, negative on failure
1779 int e1000_setup_all_rx_resources(struct e1000_adapter
*adapter
)
1783 for (i
= 0; i
< adapter
->num_rx_queues
; i
++) {
1784 err
= e1000_setup_rx_resources(adapter
, &adapter
->rx_ring
[i
]);
1786 e_err(probe
, "Allocation for Rx Queue %u failed\n", i
);
1787 for (i
-- ; i
>= 0; i
--)
1788 e1000_free_rx_resources(adapter
,
1789 &adapter
->rx_ring
[i
]);
1798 * e1000_setup_rctl - configure the receive control registers
1799 * @adapter: Board private structure
1801 static void e1000_setup_rctl(struct e1000_adapter
*adapter
)
1803 struct e1000_hw
*hw
= &adapter
->hw
;
1808 rctl
&= ~(3 << E1000_RCTL_MO_SHIFT
);
1810 rctl
|= E1000_RCTL_BAM
| E1000_RCTL_LBM_NO
|
1811 E1000_RCTL_RDMTS_HALF
|
1812 (hw
->mc_filter_type
<< E1000_RCTL_MO_SHIFT
);
1814 if (hw
->tbi_compatibility_on
== 1)
1815 rctl
|= E1000_RCTL_SBP
;
1817 rctl
&= ~E1000_RCTL_SBP
;
1819 if (adapter
->netdev
->mtu
<= ETH_DATA_LEN
)
1820 rctl
&= ~E1000_RCTL_LPE
;
1822 rctl
|= E1000_RCTL_LPE
;
1824 /* Setup buffer sizes */
1825 rctl
&= ~E1000_RCTL_SZ_4096
;
1826 rctl
|= E1000_RCTL_BSEX
;
1827 switch (adapter
->rx_buffer_len
) {
1828 case E1000_RXBUFFER_2048
:
1830 rctl
|= E1000_RCTL_SZ_2048
;
1831 rctl
&= ~E1000_RCTL_BSEX
;
1833 case E1000_RXBUFFER_4096
:
1834 rctl
|= E1000_RCTL_SZ_4096
;
1836 case E1000_RXBUFFER_8192
:
1837 rctl
|= E1000_RCTL_SZ_8192
;
1839 case E1000_RXBUFFER_16384
:
1840 rctl
|= E1000_RCTL_SZ_16384
;
1848 * e1000_configure_rx - Configure 8254x Receive Unit after Reset
1849 * @adapter: board private structure
1851 * Configure the Rx unit of the MAC after a reset.
1854 static void e1000_configure_rx(struct e1000_adapter
*adapter
)
1857 struct e1000_hw
*hw
= &adapter
->hw
;
1858 u32 rdlen
, rctl
, rxcsum
;
1860 if (adapter
->netdev
->mtu
> ETH_DATA_LEN
) {
1861 rdlen
= adapter
->rx_ring
[0].count
*
1862 sizeof(struct e1000_rx_desc
);
1863 adapter
->clean_rx
= e1000_clean_jumbo_rx_irq
;
1864 adapter
->alloc_rx_buf
= e1000_alloc_jumbo_rx_buffers
;
1866 rdlen
= adapter
->rx_ring
[0].count
*
1867 sizeof(struct e1000_rx_desc
);
1868 adapter
->clean_rx
= e1000_clean_rx_irq
;
1869 adapter
->alloc_rx_buf
= e1000_alloc_rx_buffers
;
1872 /* disable receives while setting up the descriptors */
1874 ew32(RCTL
, rctl
& ~E1000_RCTL_EN
);
1876 /* set the Receive Delay Timer Register */
1877 ew32(RDTR
, adapter
->rx_int_delay
);
1879 if (hw
->mac_type
>= e1000_82540
) {
1880 ew32(RADV
, adapter
->rx_abs_int_delay
);
1881 if (adapter
->itr_setting
!= 0)
1882 ew32(ITR
, 1000000000 / (adapter
->itr
* 256));
1885 /* Setup the HW Rx Head and Tail Descriptor Pointers and
1886 * the Base and Length of the Rx Descriptor Ring */
1887 switch (adapter
->num_rx_queues
) {
1890 rdba
= adapter
->rx_ring
[0].dma
;
1892 ew32(RDBAH
, (rdba
>> 32));
1893 ew32(RDBAL
, (rdba
& 0x00000000ffffffffULL
));
1896 adapter
->rx_ring
[0].rdh
= ((hw
->mac_type
>= e1000_82543
) ? E1000_RDH
: E1000_82542_RDH
);
1897 adapter
->rx_ring
[0].rdt
= ((hw
->mac_type
>= e1000_82543
) ? E1000_RDT
: E1000_82542_RDT
);
1901 /* Enable 82543 Receive Checksum Offload for TCP and UDP */
1902 if (hw
->mac_type
>= e1000_82543
) {
1903 rxcsum
= er32(RXCSUM
);
1904 if (adapter
->rx_csum
)
1905 rxcsum
|= E1000_RXCSUM_TUOFL
;
1907 /* don't need to clear IPPCSE as it defaults to 0 */
1908 rxcsum
&= ~E1000_RXCSUM_TUOFL
;
1909 ew32(RXCSUM
, rxcsum
);
1912 /* Enable Receives */
1913 ew32(RCTL
, rctl
| E1000_RCTL_EN
);
1917 * e1000_free_tx_resources - Free Tx Resources per Queue
1918 * @adapter: board private structure
1919 * @tx_ring: Tx descriptor ring for a specific queue
1921 * Free all transmit software resources
1924 static void e1000_free_tx_resources(struct e1000_adapter
*adapter
,
1925 struct e1000_tx_ring
*tx_ring
)
1927 struct pci_dev
*pdev
= adapter
->pdev
;
1929 e1000_clean_tx_ring(adapter
, tx_ring
);
1931 vfree(tx_ring
->buffer_info
);
1932 tx_ring
->buffer_info
= NULL
;
1934 dma_free_coherent(&pdev
->dev
, tx_ring
->size
, tx_ring
->desc
,
1937 tx_ring
->desc
= NULL
;
1941 * e1000_free_all_tx_resources - Free Tx Resources for All Queues
1942 * @adapter: board private structure
1944 * Free all transmit software resources
1947 void e1000_free_all_tx_resources(struct e1000_adapter
*adapter
)
1951 for (i
= 0; i
< adapter
->num_tx_queues
; i
++)
1952 e1000_free_tx_resources(adapter
, &adapter
->tx_ring
[i
]);
1955 static void e1000_unmap_and_free_tx_resource(struct e1000_adapter
*adapter
,
1956 struct e1000_buffer
*buffer_info
)
1958 if (buffer_info
->dma
) {
1959 if (buffer_info
->mapped_as_page
)
1960 dma_unmap_page(&adapter
->pdev
->dev
, buffer_info
->dma
,
1961 buffer_info
->length
, DMA_TO_DEVICE
);
1963 dma_unmap_single(&adapter
->pdev
->dev
, buffer_info
->dma
,
1964 buffer_info
->length
,
1966 buffer_info
->dma
= 0;
1968 if (buffer_info
->skb
) {
1969 dev_kfree_skb_any(buffer_info
->skb
);
1970 buffer_info
->skb
= NULL
;
1972 buffer_info
->time_stamp
= 0;
1973 /* buffer_info must be completely set up in the transmit path */
1977 * e1000_clean_tx_ring - Free Tx Buffers
1978 * @adapter: board private structure
1979 * @tx_ring: ring to be cleaned
1982 static void e1000_clean_tx_ring(struct e1000_adapter
*adapter
,
1983 struct e1000_tx_ring
*tx_ring
)
1985 struct e1000_hw
*hw
= &adapter
->hw
;
1986 struct e1000_buffer
*buffer_info
;
1990 /* Free all the Tx ring sk_buffs */
1992 for (i
= 0; i
< tx_ring
->count
; i
++) {
1993 buffer_info
= &tx_ring
->buffer_info
[i
];
1994 e1000_unmap_and_free_tx_resource(adapter
, buffer_info
);
1997 size
= sizeof(struct e1000_buffer
) * tx_ring
->count
;
1998 memset(tx_ring
->buffer_info
, 0, size
);
2000 /* Zero out the descriptor ring */
2002 memset(tx_ring
->desc
, 0, tx_ring
->size
);
2004 tx_ring
->next_to_use
= 0;
2005 tx_ring
->next_to_clean
= 0;
2006 tx_ring
->last_tx_tso
= false;
2008 writel(0, hw
->hw_addr
+ tx_ring
->tdh
);
2009 writel(0, hw
->hw_addr
+ tx_ring
->tdt
);
2013 * e1000_clean_all_tx_rings - Free Tx Buffers for all queues
2014 * @adapter: board private structure
2017 static void e1000_clean_all_tx_rings(struct e1000_adapter
*adapter
)
2021 for (i
= 0; i
< adapter
->num_tx_queues
; i
++)
2022 e1000_clean_tx_ring(adapter
, &adapter
->tx_ring
[i
]);
2026 * e1000_free_rx_resources - Free Rx Resources
2027 * @adapter: board private structure
2028 * @rx_ring: ring to clean the resources from
2030 * Free all receive software resources
2033 static void e1000_free_rx_resources(struct e1000_adapter
*adapter
,
2034 struct e1000_rx_ring
*rx_ring
)
2036 struct pci_dev
*pdev
= adapter
->pdev
;
2038 e1000_clean_rx_ring(adapter
, rx_ring
);
2040 vfree(rx_ring
->buffer_info
);
2041 rx_ring
->buffer_info
= NULL
;
2043 dma_free_coherent(&pdev
->dev
, rx_ring
->size
, rx_ring
->desc
,
2046 rx_ring
->desc
= NULL
;
2050 * e1000_free_all_rx_resources - Free Rx Resources for All Queues
2051 * @adapter: board private structure
2053 * Free all receive software resources
2056 void e1000_free_all_rx_resources(struct e1000_adapter
*adapter
)
2060 for (i
= 0; i
< adapter
->num_rx_queues
; i
++)
2061 e1000_free_rx_resources(adapter
, &adapter
->rx_ring
[i
]);
2065 * e1000_clean_rx_ring - Free Rx Buffers per Queue
2066 * @adapter: board private structure
2067 * @rx_ring: ring to free buffers from
2070 static void e1000_clean_rx_ring(struct e1000_adapter
*adapter
,
2071 struct e1000_rx_ring
*rx_ring
)
2073 struct e1000_hw
*hw
= &adapter
->hw
;
2074 struct e1000_buffer
*buffer_info
;
2075 struct pci_dev
*pdev
= adapter
->pdev
;
2079 /* Free all the Rx ring sk_buffs */
2080 for (i
= 0; i
< rx_ring
->count
; i
++) {
2081 buffer_info
= &rx_ring
->buffer_info
[i
];
2082 if (buffer_info
->dma
&&
2083 adapter
->clean_rx
== e1000_clean_rx_irq
) {
2084 dma_unmap_single(&pdev
->dev
, buffer_info
->dma
,
2085 buffer_info
->length
,
2087 } else if (buffer_info
->dma
&&
2088 adapter
->clean_rx
== e1000_clean_jumbo_rx_irq
) {
2089 dma_unmap_page(&pdev
->dev
, buffer_info
->dma
,
2090 buffer_info
->length
,
2094 buffer_info
->dma
= 0;
2095 if (buffer_info
->page
) {
2096 put_page(buffer_info
->page
);
2097 buffer_info
->page
= NULL
;
2099 if (buffer_info
->skb
) {
2100 dev_kfree_skb(buffer_info
->skb
);
2101 buffer_info
->skb
= NULL
;
2105 /* there also may be some cached data from a chained receive */
2106 if (rx_ring
->rx_skb_top
) {
2107 dev_kfree_skb(rx_ring
->rx_skb_top
);
2108 rx_ring
->rx_skb_top
= NULL
;
2111 size
= sizeof(struct e1000_buffer
) * rx_ring
->count
;
2112 memset(rx_ring
->buffer_info
, 0, size
);
2114 /* Zero out the descriptor ring */
2115 memset(rx_ring
->desc
, 0, rx_ring
->size
);
2117 rx_ring
->next_to_clean
= 0;
2118 rx_ring
->next_to_use
= 0;
2120 writel(0, hw
->hw_addr
+ rx_ring
->rdh
);
2121 writel(0, hw
->hw_addr
+ rx_ring
->rdt
);
2125 * e1000_clean_all_rx_rings - Free Rx Buffers for all queues
2126 * @adapter: board private structure
2129 static void e1000_clean_all_rx_rings(struct e1000_adapter
*adapter
)
2133 for (i
= 0; i
< adapter
->num_rx_queues
; i
++)
2134 e1000_clean_rx_ring(adapter
, &adapter
->rx_ring
[i
]);
2137 /* The 82542 2.0 (revision 2) needs to have the receive unit in reset
2138 * and memory write and invalidate disabled for certain operations
2140 static void e1000_enter_82542_rst(struct e1000_adapter
*adapter
)
2142 struct e1000_hw
*hw
= &adapter
->hw
;
2143 struct net_device
*netdev
= adapter
->netdev
;
2146 e1000_pci_clear_mwi(hw
);
2149 rctl
|= E1000_RCTL_RST
;
2151 E1000_WRITE_FLUSH();
2154 if (netif_running(netdev
))
2155 e1000_clean_all_rx_rings(adapter
);
2158 static void e1000_leave_82542_rst(struct e1000_adapter
*adapter
)
2160 struct e1000_hw
*hw
= &adapter
->hw
;
2161 struct net_device
*netdev
= adapter
->netdev
;
2165 rctl
&= ~E1000_RCTL_RST
;
2167 E1000_WRITE_FLUSH();
2170 if (hw
->pci_cmd_word
& PCI_COMMAND_INVALIDATE
)
2171 e1000_pci_set_mwi(hw
);
2173 if (netif_running(netdev
)) {
2174 /* No need to loop, because 82542 supports only 1 queue */
2175 struct e1000_rx_ring
*ring
= &adapter
->rx_ring
[0];
2176 e1000_configure_rx(adapter
);
2177 adapter
->alloc_rx_buf(adapter
, ring
, E1000_DESC_UNUSED(ring
));
2182 * e1000_set_mac - Change the Ethernet Address of the NIC
2183 * @netdev: network interface device structure
2184 * @p: pointer to an address structure
2186 * Returns 0 on success, negative on failure
2189 static int e1000_set_mac(struct net_device
*netdev
, void *p
)
2191 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
2192 struct e1000_hw
*hw
= &adapter
->hw
;
2193 struct sockaddr
*addr
= p
;
2195 if (!is_valid_ether_addr(addr
->sa_data
))
2196 return -EADDRNOTAVAIL
;
2198 /* 82542 2.0 needs to be in reset to write receive address registers */
2200 if (hw
->mac_type
== e1000_82542_rev2_0
)
2201 e1000_enter_82542_rst(adapter
);
2203 memcpy(netdev
->dev_addr
, addr
->sa_data
, netdev
->addr_len
);
2204 memcpy(hw
->mac_addr
, addr
->sa_data
, netdev
->addr_len
);
2206 e1000_rar_set(hw
, hw
->mac_addr
, 0);
2208 if (hw
->mac_type
== e1000_82542_rev2_0
)
2209 e1000_leave_82542_rst(adapter
);
2215 * e1000_set_rx_mode - Secondary Unicast, Multicast and Promiscuous mode set
2216 * @netdev: network interface device structure
2218 * The set_rx_mode entry point is called whenever the unicast or multicast
2219 * address lists or the network interface flags are updated. This routine is
2220 * responsible for configuring the hardware for proper unicast, multicast,
2221 * promiscuous mode, and all-multi behavior.
2224 static void e1000_set_rx_mode(struct net_device
*netdev
)
2226 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
2227 struct e1000_hw
*hw
= &adapter
->hw
;
2228 struct netdev_hw_addr
*ha
;
2229 bool use_uc
= false;
2232 int i
, rar_entries
= E1000_RAR_ENTRIES
;
2233 int mta_reg_count
= E1000_NUM_MTA_REGISTERS
;
2234 u32
*mcarray
= kcalloc(mta_reg_count
, sizeof(u32
), GFP_ATOMIC
);
2237 e_err(probe
, "memory allocation failed\n");
2241 /* Check for Promiscuous and All Multicast modes */
2245 if (netdev
->flags
& IFF_PROMISC
) {
2246 rctl
|= (E1000_RCTL_UPE
| E1000_RCTL_MPE
);
2247 rctl
&= ~E1000_RCTL_VFE
;
2249 if (netdev
->flags
& IFF_ALLMULTI
)
2250 rctl
|= E1000_RCTL_MPE
;
2252 rctl
&= ~E1000_RCTL_MPE
;
2253 /* Enable VLAN filter if there is a VLAN */
2254 if (e1000_vlan_used(adapter
))
2255 rctl
|= E1000_RCTL_VFE
;
2258 if (netdev_uc_count(netdev
) > rar_entries
- 1) {
2259 rctl
|= E1000_RCTL_UPE
;
2260 } else if (!(netdev
->flags
& IFF_PROMISC
)) {
2261 rctl
&= ~E1000_RCTL_UPE
;
2267 /* 82542 2.0 needs to be in reset to write receive address registers */
2269 if (hw
->mac_type
== e1000_82542_rev2_0
)
2270 e1000_enter_82542_rst(adapter
);
2272 /* load the first 14 addresses into the exact filters 1-14. Unicast
2273 * addresses take precedence to avoid disabling unicast filtering
2276 * RAR 0 is used for the station MAC address
2277 * if there are not 14 addresses, go ahead and clear the filters
2281 netdev_for_each_uc_addr(ha
, netdev
) {
2282 if (i
== rar_entries
)
2284 e1000_rar_set(hw
, ha
->addr
, i
++);
2287 netdev_for_each_mc_addr(ha
, netdev
) {
2288 if (i
== rar_entries
) {
2289 /* load any remaining addresses into the hash table */
2290 u32 hash_reg
, hash_bit
, mta
;
2291 hash_value
= e1000_hash_mc_addr(hw
, ha
->addr
);
2292 hash_reg
= (hash_value
>> 5) & 0x7F;
2293 hash_bit
= hash_value
& 0x1F;
2294 mta
= (1 << hash_bit
);
2295 mcarray
[hash_reg
] |= mta
;
2297 e1000_rar_set(hw
, ha
->addr
, i
++);
2301 for (; i
< rar_entries
; i
++) {
2302 E1000_WRITE_REG_ARRAY(hw
, RA
, i
<< 1, 0);
2303 E1000_WRITE_FLUSH();
2304 E1000_WRITE_REG_ARRAY(hw
, RA
, (i
<< 1) + 1, 0);
2305 E1000_WRITE_FLUSH();
2308 /* write the hash table completely, write from bottom to avoid
2309 * both stupid write combining chipsets, and flushing each write */
2310 for (i
= mta_reg_count
- 1; i
>= 0 ; i
--) {
2312 * If we are on an 82544 has an errata where writing odd
2313 * offsets overwrites the previous even offset, but writing
2314 * backwards over the range solves the issue by always
2315 * writing the odd offset first
2317 E1000_WRITE_REG_ARRAY(hw
, MTA
, i
, mcarray
[i
]);
2319 E1000_WRITE_FLUSH();
2321 if (hw
->mac_type
== e1000_82542_rev2_0
)
2322 e1000_leave_82542_rst(adapter
);
2328 * e1000_update_phy_info_task - get phy info
2329 * @work: work struct contained inside adapter struct
2331 * Need to wait a few seconds after link up to get diagnostic information from
2334 static void e1000_update_phy_info_task(struct work_struct
*work
)
2336 struct e1000_adapter
*adapter
= container_of(work
,
2337 struct e1000_adapter
,
2338 phy_info_task
.work
);
2339 if (test_bit(__E1000_DOWN
, &adapter
->flags
))
2341 mutex_lock(&adapter
->mutex
);
2342 e1000_phy_get_info(&adapter
->hw
, &adapter
->phy_info
);
2343 mutex_unlock(&adapter
->mutex
);
2347 * e1000_82547_tx_fifo_stall_task - task to complete work
2348 * @work: work struct contained inside adapter struct
2350 static void e1000_82547_tx_fifo_stall_task(struct work_struct
*work
)
2352 struct e1000_adapter
*adapter
= container_of(work
,
2353 struct e1000_adapter
,
2354 fifo_stall_task
.work
);
2355 struct e1000_hw
*hw
= &adapter
->hw
;
2356 struct net_device
*netdev
= adapter
->netdev
;
2359 if (test_bit(__E1000_DOWN
, &adapter
->flags
))
2361 mutex_lock(&adapter
->mutex
);
2362 if (atomic_read(&adapter
->tx_fifo_stall
)) {
2363 if ((er32(TDT
) == er32(TDH
)) &&
2364 (er32(TDFT
) == er32(TDFH
)) &&
2365 (er32(TDFTS
) == er32(TDFHS
))) {
2367 ew32(TCTL
, tctl
& ~E1000_TCTL_EN
);
2368 ew32(TDFT
, adapter
->tx_head_addr
);
2369 ew32(TDFH
, adapter
->tx_head_addr
);
2370 ew32(TDFTS
, adapter
->tx_head_addr
);
2371 ew32(TDFHS
, adapter
->tx_head_addr
);
2373 E1000_WRITE_FLUSH();
2375 adapter
->tx_fifo_head
= 0;
2376 atomic_set(&adapter
->tx_fifo_stall
, 0);
2377 netif_wake_queue(netdev
);
2378 } else if (!test_bit(__E1000_DOWN
, &adapter
->flags
)) {
2379 schedule_delayed_work(&adapter
->fifo_stall_task
, 1);
2382 mutex_unlock(&adapter
->mutex
);
2385 bool e1000_has_link(struct e1000_adapter
*adapter
)
2387 struct e1000_hw
*hw
= &adapter
->hw
;
2388 bool link_active
= false;
2390 /* get_link_status is set on LSC (link status) interrupt or rx
2391 * sequence error interrupt (except on intel ce4100).
2392 * get_link_status will stay false until the
2393 * e1000_check_for_link establishes link for copper adapters
2396 switch (hw
->media_type
) {
2397 case e1000_media_type_copper
:
2398 if (hw
->mac_type
== e1000_ce4100
)
2399 hw
->get_link_status
= 1;
2400 if (hw
->get_link_status
) {
2401 e1000_check_for_link(hw
);
2402 link_active
= !hw
->get_link_status
;
2407 case e1000_media_type_fiber
:
2408 e1000_check_for_link(hw
);
2409 link_active
= !!(er32(STATUS
) & E1000_STATUS_LU
);
2411 case e1000_media_type_internal_serdes
:
2412 e1000_check_for_link(hw
);
2413 link_active
= hw
->serdes_has_link
;
2423 * e1000_watchdog - work function
2424 * @work: work struct contained inside adapter struct
2426 static void e1000_watchdog(struct work_struct
*work
)
2428 struct e1000_adapter
*adapter
= container_of(work
,
2429 struct e1000_adapter
,
2430 watchdog_task
.work
);
2431 struct e1000_hw
*hw
= &adapter
->hw
;
2432 struct net_device
*netdev
= adapter
->netdev
;
2433 struct e1000_tx_ring
*txdr
= adapter
->tx_ring
;
2436 if (test_bit(__E1000_DOWN
, &adapter
->flags
))
2439 mutex_lock(&adapter
->mutex
);
2440 link
= e1000_has_link(adapter
);
2441 if ((netif_carrier_ok(netdev
)) && link
)
2445 if (!netif_carrier_ok(netdev
)) {
2448 /* update snapshot of PHY registers on LSC */
2449 e1000_get_speed_and_duplex(hw
,
2450 &adapter
->link_speed
,
2451 &adapter
->link_duplex
);
2454 pr_info("%s NIC Link is Up %d Mbps %s, "
2455 "Flow Control: %s\n",
2457 adapter
->link_speed
,
2458 adapter
->link_duplex
== FULL_DUPLEX
?
2459 "Full Duplex" : "Half Duplex",
2460 ((ctrl
& E1000_CTRL_TFCE
) && (ctrl
&
2461 E1000_CTRL_RFCE
)) ? "RX/TX" : ((ctrl
&
2462 E1000_CTRL_RFCE
) ? "RX" : ((ctrl
&
2463 E1000_CTRL_TFCE
) ? "TX" : "None")));
2465 /* adjust timeout factor according to speed/duplex */
2466 adapter
->tx_timeout_factor
= 1;
2467 switch (adapter
->link_speed
) {
2470 adapter
->tx_timeout_factor
= 16;
2474 /* maybe add some timeout factor ? */
2478 /* enable transmits in the hardware */
2480 tctl
|= E1000_TCTL_EN
;
2483 netif_carrier_on(netdev
);
2484 if (!test_bit(__E1000_DOWN
, &adapter
->flags
))
2485 schedule_delayed_work(&adapter
->phy_info_task
,
2487 adapter
->smartspeed
= 0;
2490 if (netif_carrier_ok(netdev
)) {
2491 adapter
->link_speed
= 0;
2492 adapter
->link_duplex
= 0;
2493 pr_info("%s NIC Link is Down\n",
2495 netif_carrier_off(netdev
);
2497 if (!test_bit(__E1000_DOWN
, &adapter
->flags
))
2498 schedule_delayed_work(&adapter
->phy_info_task
,
2502 e1000_smartspeed(adapter
);
2506 e1000_update_stats(adapter
);
2508 hw
->tx_packet_delta
= adapter
->stats
.tpt
- adapter
->tpt_old
;
2509 adapter
->tpt_old
= adapter
->stats
.tpt
;
2510 hw
->collision_delta
= adapter
->stats
.colc
- adapter
->colc_old
;
2511 adapter
->colc_old
= adapter
->stats
.colc
;
2513 adapter
->gorcl
= adapter
->stats
.gorcl
- adapter
->gorcl_old
;
2514 adapter
->gorcl_old
= adapter
->stats
.gorcl
;
2515 adapter
->gotcl
= adapter
->stats
.gotcl
- adapter
->gotcl_old
;
2516 adapter
->gotcl_old
= adapter
->stats
.gotcl
;
2518 e1000_update_adaptive(hw
);
2520 if (!netif_carrier_ok(netdev
)) {
2521 if (E1000_DESC_UNUSED(txdr
) + 1 < txdr
->count
) {
2522 /* We've lost link, so the controller stops DMA,
2523 * but we've got queued Tx work that's never going
2524 * to get done, so reset controller to flush Tx.
2525 * (Do the reset outside of interrupt context). */
2526 adapter
->tx_timeout_count
++;
2527 schedule_work(&adapter
->reset_task
);
2528 /* exit immediately since reset is imminent */
2533 /* Simple mode for Interrupt Throttle Rate (ITR) */
2534 if (hw
->mac_type
>= e1000_82540
&& adapter
->itr_setting
== 4) {
2536 * Symmetric Tx/Rx gets a reduced ITR=2000;
2537 * Total asymmetrical Tx or Rx gets ITR=8000;
2538 * everyone else is between 2000-8000.
2540 u32 goc
= (adapter
->gotcl
+ adapter
->gorcl
) / 10000;
2541 u32 dif
= (adapter
->gotcl
> adapter
->gorcl
?
2542 adapter
->gotcl
- adapter
->gorcl
:
2543 adapter
->gorcl
- adapter
->gotcl
) / 10000;
2544 u32 itr
= goc
> 0 ? (dif
* 6000 / goc
+ 2000) : 8000;
2546 ew32(ITR
, 1000000000 / (itr
* 256));
2549 /* Cause software interrupt to ensure rx ring is cleaned */
2550 ew32(ICS
, E1000_ICS_RXDMT0
);
2552 /* Force detection of hung controller every watchdog period */
2553 adapter
->detect_tx_hung
= true;
2555 /* Reschedule the task */
2556 if (!test_bit(__E1000_DOWN
, &adapter
->flags
))
2557 schedule_delayed_work(&adapter
->watchdog_task
, 2 * HZ
);
2560 mutex_unlock(&adapter
->mutex
);
2563 enum latency_range
{
2567 latency_invalid
= 255
2571 * e1000_update_itr - update the dynamic ITR value based on statistics
2572 * @adapter: pointer to adapter
2573 * @itr_setting: current adapter->itr
2574 * @packets: the number of packets during this measurement interval
2575 * @bytes: the number of bytes during this measurement interval
2577 * Stores a new ITR value based on packets and byte
2578 * counts during the last interrupt. The advantage of per interrupt
2579 * computation is faster updates and more accurate ITR for the current
2580 * traffic pattern. Constants in this function were computed
2581 * based on theoretical maximum wire speed and thresholds were set based
2582 * on testing data as well as attempting to minimize response time
2583 * while increasing bulk throughput.
2584 * this functionality is controlled by the InterruptThrottleRate module
2585 * parameter (see e1000_param.c)
2587 static unsigned int e1000_update_itr(struct e1000_adapter
*adapter
,
2588 u16 itr_setting
, int packets
, int bytes
)
2590 unsigned int retval
= itr_setting
;
2591 struct e1000_hw
*hw
= &adapter
->hw
;
2593 if (unlikely(hw
->mac_type
< e1000_82540
))
2594 goto update_itr_done
;
2597 goto update_itr_done
;
2599 switch (itr_setting
) {
2600 case lowest_latency
:
2601 /* jumbo frames get bulk treatment*/
2602 if (bytes
/packets
> 8000)
2603 retval
= bulk_latency
;
2604 else if ((packets
< 5) && (bytes
> 512))
2605 retval
= low_latency
;
2607 case low_latency
: /* 50 usec aka 20000 ints/s */
2608 if (bytes
> 10000) {
2609 /* jumbo frames need bulk latency setting */
2610 if (bytes
/packets
> 8000)
2611 retval
= bulk_latency
;
2612 else if ((packets
< 10) || ((bytes
/packets
) > 1200))
2613 retval
= bulk_latency
;
2614 else if ((packets
> 35))
2615 retval
= lowest_latency
;
2616 } else if (bytes
/packets
> 2000)
2617 retval
= bulk_latency
;
2618 else if (packets
<= 2 && bytes
< 512)
2619 retval
= lowest_latency
;
2621 case bulk_latency
: /* 250 usec aka 4000 ints/s */
2622 if (bytes
> 25000) {
2624 retval
= low_latency
;
2625 } else if (bytes
< 6000) {
2626 retval
= low_latency
;
2635 static void e1000_set_itr(struct e1000_adapter
*adapter
)
2637 struct e1000_hw
*hw
= &adapter
->hw
;
2639 u32 new_itr
= adapter
->itr
;
2641 if (unlikely(hw
->mac_type
< e1000_82540
))
2644 /* for non-gigabit speeds, just fix the interrupt rate at 4000 */
2645 if (unlikely(adapter
->link_speed
!= SPEED_1000
)) {
2651 adapter
->tx_itr
= e1000_update_itr(adapter
,
2653 adapter
->total_tx_packets
,
2654 adapter
->total_tx_bytes
);
2655 /* conservative mode (itr 3) eliminates the lowest_latency setting */
2656 if (adapter
->itr_setting
== 3 && adapter
->tx_itr
== lowest_latency
)
2657 adapter
->tx_itr
= low_latency
;
2659 adapter
->rx_itr
= e1000_update_itr(adapter
,
2661 adapter
->total_rx_packets
,
2662 adapter
->total_rx_bytes
);
2663 /* conservative mode (itr 3) eliminates the lowest_latency setting */
2664 if (adapter
->itr_setting
== 3 && adapter
->rx_itr
== lowest_latency
)
2665 adapter
->rx_itr
= low_latency
;
2667 current_itr
= max(adapter
->rx_itr
, adapter
->tx_itr
);
2669 switch (current_itr
) {
2670 /* counts and packets in update_itr are dependent on these numbers */
2671 case lowest_latency
:
2675 new_itr
= 20000; /* aka hwitr = ~200 */
2685 if (new_itr
!= adapter
->itr
) {
2686 /* this attempts to bias the interrupt rate towards Bulk
2687 * by adding intermediate steps when interrupt rate is
2689 new_itr
= new_itr
> adapter
->itr
?
2690 min(adapter
->itr
+ (new_itr
>> 2), new_itr
) :
2692 adapter
->itr
= new_itr
;
2693 ew32(ITR
, 1000000000 / (new_itr
* 256));
2697 #define E1000_TX_FLAGS_CSUM 0x00000001
2698 #define E1000_TX_FLAGS_VLAN 0x00000002
2699 #define E1000_TX_FLAGS_TSO 0x00000004
2700 #define E1000_TX_FLAGS_IPV4 0x00000008
2701 #define E1000_TX_FLAGS_NO_FCS 0x00000010
2702 #define E1000_TX_FLAGS_VLAN_MASK 0xffff0000
2703 #define E1000_TX_FLAGS_VLAN_SHIFT 16
2705 static int e1000_tso(struct e1000_adapter
*adapter
,
2706 struct e1000_tx_ring
*tx_ring
, struct sk_buff
*skb
)
2708 struct e1000_context_desc
*context_desc
;
2709 struct e1000_buffer
*buffer_info
;
2712 u16 ipcse
= 0, tucse
, mss
;
2713 u8 ipcss
, ipcso
, tucss
, tucso
, hdr_len
;
2716 if (skb_is_gso(skb
)) {
2717 if (skb_header_cloned(skb
)) {
2718 err
= pskb_expand_head(skb
, 0, 0, GFP_ATOMIC
);
2723 hdr_len
= skb_transport_offset(skb
) + tcp_hdrlen(skb
);
2724 mss
= skb_shinfo(skb
)->gso_size
;
2725 if (skb
->protocol
== htons(ETH_P_IP
)) {
2726 struct iphdr
*iph
= ip_hdr(skb
);
2729 tcp_hdr(skb
)->check
= ~csum_tcpudp_magic(iph
->saddr
,
2733 cmd_length
= E1000_TXD_CMD_IP
;
2734 ipcse
= skb_transport_offset(skb
) - 1;
2735 } else if (skb
->protocol
== htons(ETH_P_IPV6
)) {
2736 ipv6_hdr(skb
)->payload_len
= 0;
2737 tcp_hdr(skb
)->check
=
2738 ~csum_ipv6_magic(&ipv6_hdr(skb
)->saddr
,
2739 &ipv6_hdr(skb
)->daddr
,
2743 ipcss
= skb_network_offset(skb
);
2744 ipcso
= (void *)&(ip_hdr(skb
)->check
) - (void *)skb
->data
;
2745 tucss
= skb_transport_offset(skb
);
2746 tucso
= (void *)&(tcp_hdr(skb
)->check
) - (void *)skb
->data
;
2749 cmd_length
|= (E1000_TXD_CMD_DEXT
| E1000_TXD_CMD_TSE
|
2750 E1000_TXD_CMD_TCP
| (skb
->len
- (hdr_len
)));
2752 i
= tx_ring
->next_to_use
;
2753 context_desc
= E1000_CONTEXT_DESC(*tx_ring
, i
);
2754 buffer_info
= &tx_ring
->buffer_info
[i
];
2756 context_desc
->lower_setup
.ip_fields
.ipcss
= ipcss
;
2757 context_desc
->lower_setup
.ip_fields
.ipcso
= ipcso
;
2758 context_desc
->lower_setup
.ip_fields
.ipcse
= cpu_to_le16(ipcse
);
2759 context_desc
->upper_setup
.tcp_fields
.tucss
= tucss
;
2760 context_desc
->upper_setup
.tcp_fields
.tucso
= tucso
;
2761 context_desc
->upper_setup
.tcp_fields
.tucse
= cpu_to_le16(tucse
);
2762 context_desc
->tcp_seg_setup
.fields
.mss
= cpu_to_le16(mss
);
2763 context_desc
->tcp_seg_setup
.fields
.hdr_len
= hdr_len
;
2764 context_desc
->cmd_and_length
= cpu_to_le32(cmd_length
);
2766 buffer_info
->time_stamp
= jiffies
;
2767 buffer_info
->next_to_watch
= i
;
2769 if (++i
== tx_ring
->count
) i
= 0;
2770 tx_ring
->next_to_use
= i
;
2777 static bool e1000_tx_csum(struct e1000_adapter
*adapter
,
2778 struct e1000_tx_ring
*tx_ring
, struct sk_buff
*skb
)
2780 struct e1000_context_desc
*context_desc
;
2781 struct e1000_buffer
*buffer_info
;
2784 u32 cmd_len
= E1000_TXD_CMD_DEXT
;
2786 if (skb
->ip_summed
!= CHECKSUM_PARTIAL
)
2789 switch (skb
->protocol
) {
2790 case cpu_to_be16(ETH_P_IP
):
2791 if (ip_hdr(skb
)->protocol
== IPPROTO_TCP
)
2792 cmd_len
|= E1000_TXD_CMD_TCP
;
2794 case cpu_to_be16(ETH_P_IPV6
):
2795 /* XXX not handling all IPV6 headers */
2796 if (ipv6_hdr(skb
)->nexthdr
== IPPROTO_TCP
)
2797 cmd_len
|= E1000_TXD_CMD_TCP
;
2800 if (unlikely(net_ratelimit()))
2801 e_warn(drv
, "checksum_partial proto=%x!\n",
2806 css
= skb_checksum_start_offset(skb
);
2808 i
= tx_ring
->next_to_use
;
2809 buffer_info
= &tx_ring
->buffer_info
[i
];
2810 context_desc
= E1000_CONTEXT_DESC(*tx_ring
, i
);
2812 context_desc
->lower_setup
.ip_config
= 0;
2813 context_desc
->upper_setup
.tcp_fields
.tucss
= css
;
2814 context_desc
->upper_setup
.tcp_fields
.tucso
=
2815 css
+ skb
->csum_offset
;
2816 context_desc
->upper_setup
.tcp_fields
.tucse
= 0;
2817 context_desc
->tcp_seg_setup
.data
= 0;
2818 context_desc
->cmd_and_length
= cpu_to_le32(cmd_len
);
2820 buffer_info
->time_stamp
= jiffies
;
2821 buffer_info
->next_to_watch
= i
;
2823 if (unlikely(++i
== tx_ring
->count
)) i
= 0;
2824 tx_ring
->next_to_use
= i
;
2829 #define E1000_MAX_TXD_PWR 12
2830 #define E1000_MAX_DATA_PER_TXD (1<<E1000_MAX_TXD_PWR)
2832 static int e1000_tx_map(struct e1000_adapter
*adapter
,
2833 struct e1000_tx_ring
*tx_ring
,
2834 struct sk_buff
*skb
, unsigned int first
,
2835 unsigned int max_per_txd
, unsigned int nr_frags
,
2838 struct e1000_hw
*hw
= &adapter
->hw
;
2839 struct pci_dev
*pdev
= adapter
->pdev
;
2840 struct e1000_buffer
*buffer_info
;
2841 unsigned int len
= skb_headlen(skb
);
2842 unsigned int offset
= 0, size
, count
= 0, i
;
2843 unsigned int f
, bytecount
, segs
;
2845 i
= tx_ring
->next_to_use
;
2848 buffer_info
= &tx_ring
->buffer_info
[i
];
2849 size
= min(len
, max_per_txd
);
2850 /* Workaround for Controller erratum --
2851 * descriptor for non-tso packet in a linear SKB that follows a
2852 * tso gets written back prematurely before the data is fully
2853 * DMA'd to the controller */
2854 if (!skb
->data_len
&& tx_ring
->last_tx_tso
&&
2856 tx_ring
->last_tx_tso
= false;
2860 /* Workaround for premature desc write-backs
2861 * in TSO mode. Append 4-byte sentinel desc */
2862 if (unlikely(mss
&& !nr_frags
&& size
== len
&& size
> 8))
2864 /* work-around for errata 10 and it applies
2865 * to all controllers in PCI-X mode
2866 * The fix is to make sure that the first descriptor of a
2867 * packet is smaller than 2048 - 16 - 16 (or 2016) bytes
2869 if (unlikely((hw
->bus_type
== e1000_bus_type_pcix
) &&
2870 (size
> 2015) && count
== 0))
2873 /* Workaround for potential 82544 hang in PCI-X. Avoid
2874 * terminating buffers within evenly-aligned dwords. */
2875 if (unlikely(adapter
->pcix_82544
&&
2876 !((unsigned long)(skb
->data
+ offset
+ size
- 1) & 4) &&
2880 buffer_info
->length
= size
;
2881 /* set time_stamp *before* dma to help avoid a possible race */
2882 buffer_info
->time_stamp
= jiffies
;
2883 buffer_info
->mapped_as_page
= false;
2884 buffer_info
->dma
= dma_map_single(&pdev
->dev
,
2886 size
, DMA_TO_DEVICE
);
2887 if (dma_mapping_error(&pdev
->dev
, buffer_info
->dma
))
2889 buffer_info
->next_to_watch
= i
;
2896 if (unlikely(i
== tx_ring
->count
))
2901 for (f
= 0; f
< nr_frags
; f
++) {
2902 const struct skb_frag_struct
*frag
;
2904 frag
= &skb_shinfo(skb
)->frags
[f
];
2905 len
= skb_frag_size(frag
);
2909 unsigned long bufend
;
2911 if (unlikely(i
== tx_ring
->count
))
2914 buffer_info
= &tx_ring
->buffer_info
[i
];
2915 size
= min(len
, max_per_txd
);
2916 /* Workaround for premature desc write-backs
2917 * in TSO mode. Append 4-byte sentinel desc */
2918 if (unlikely(mss
&& f
== (nr_frags
-1) && size
== len
&& size
> 8))
2920 /* Workaround for potential 82544 hang in PCI-X.
2921 * Avoid terminating buffers within evenly-aligned
2923 bufend
= (unsigned long)
2924 page_to_phys(skb_frag_page(frag
));
2925 bufend
+= offset
+ size
- 1;
2926 if (unlikely(adapter
->pcix_82544
&&
2931 buffer_info
->length
= size
;
2932 buffer_info
->time_stamp
= jiffies
;
2933 buffer_info
->mapped_as_page
= true;
2934 buffer_info
->dma
= skb_frag_dma_map(&pdev
->dev
, frag
,
2935 offset
, size
, DMA_TO_DEVICE
);
2936 if (dma_mapping_error(&pdev
->dev
, buffer_info
->dma
))
2938 buffer_info
->next_to_watch
= i
;
2946 segs
= skb_shinfo(skb
)->gso_segs
?: 1;
2947 /* multiply data chunks by size of headers */
2948 bytecount
= ((segs
- 1) * skb_headlen(skb
)) + skb
->len
;
2950 tx_ring
->buffer_info
[i
].skb
= skb
;
2951 tx_ring
->buffer_info
[i
].segs
= segs
;
2952 tx_ring
->buffer_info
[i
].bytecount
= bytecount
;
2953 tx_ring
->buffer_info
[first
].next_to_watch
= i
;
2958 dev_err(&pdev
->dev
, "TX DMA map failed\n");
2959 buffer_info
->dma
= 0;
2965 i
+= tx_ring
->count
;
2967 buffer_info
= &tx_ring
->buffer_info
[i
];
2968 e1000_unmap_and_free_tx_resource(adapter
, buffer_info
);
2974 static void e1000_tx_queue(struct e1000_adapter
*adapter
,
2975 struct e1000_tx_ring
*tx_ring
, int tx_flags
,
2978 struct e1000_hw
*hw
= &adapter
->hw
;
2979 struct e1000_tx_desc
*tx_desc
= NULL
;
2980 struct e1000_buffer
*buffer_info
;
2981 u32 txd_upper
= 0, txd_lower
= E1000_TXD_CMD_IFCS
;
2984 if (likely(tx_flags
& E1000_TX_FLAGS_TSO
)) {
2985 txd_lower
|= E1000_TXD_CMD_DEXT
| E1000_TXD_DTYP_D
|
2987 txd_upper
|= E1000_TXD_POPTS_TXSM
<< 8;
2989 if (likely(tx_flags
& E1000_TX_FLAGS_IPV4
))
2990 txd_upper
|= E1000_TXD_POPTS_IXSM
<< 8;
2993 if (likely(tx_flags
& E1000_TX_FLAGS_CSUM
)) {
2994 txd_lower
|= E1000_TXD_CMD_DEXT
| E1000_TXD_DTYP_D
;
2995 txd_upper
|= E1000_TXD_POPTS_TXSM
<< 8;
2998 if (unlikely(tx_flags
& E1000_TX_FLAGS_VLAN
)) {
2999 txd_lower
|= E1000_TXD_CMD_VLE
;
3000 txd_upper
|= (tx_flags
& E1000_TX_FLAGS_VLAN_MASK
);
3003 if (unlikely(tx_flags
& E1000_TX_FLAGS_NO_FCS
))
3004 txd_lower
&= ~(E1000_TXD_CMD_IFCS
);
3006 i
= tx_ring
->next_to_use
;
3009 buffer_info
= &tx_ring
->buffer_info
[i
];
3010 tx_desc
= E1000_TX_DESC(*tx_ring
, i
);
3011 tx_desc
->buffer_addr
= cpu_to_le64(buffer_info
->dma
);
3012 tx_desc
->lower
.data
=
3013 cpu_to_le32(txd_lower
| buffer_info
->length
);
3014 tx_desc
->upper
.data
= cpu_to_le32(txd_upper
);
3015 if (unlikely(++i
== tx_ring
->count
)) i
= 0;
3018 tx_desc
->lower
.data
|= cpu_to_le32(adapter
->txd_cmd
);
3020 /* txd_cmd re-enables FCS, so we'll re-disable it here as desired. */
3021 if (unlikely(tx_flags
& E1000_TX_FLAGS_NO_FCS
))
3022 tx_desc
->lower
.data
&= ~(cpu_to_le32(E1000_TXD_CMD_IFCS
));
3024 /* Force memory writes to complete before letting h/w
3025 * know there are new descriptors to fetch. (Only
3026 * applicable for weak-ordered memory model archs,
3027 * such as IA-64). */
3030 tx_ring
->next_to_use
= i
;
3031 writel(i
, hw
->hw_addr
+ tx_ring
->tdt
);
3032 /* we need this if more than one processor can write to our tail
3033 * at a time, it syncronizes IO on IA64/Altix systems */
3038 * 82547 workaround to avoid controller hang in half-duplex environment.
3039 * The workaround is to avoid queuing a large packet that would span
3040 * the internal Tx FIFO ring boundary by notifying the stack to resend
3041 * the packet at a later time. This gives the Tx FIFO an opportunity to
3042 * flush all packets. When that occurs, we reset the Tx FIFO pointers
3043 * to the beginning of the Tx FIFO.
3046 #define E1000_FIFO_HDR 0x10
3047 #define E1000_82547_PAD_LEN 0x3E0
3049 static int e1000_82547_fifo_workaround(struct e1000_adapter
*adapter
,
3050 struct sk_buff
*skb
)
3052 u32 fifo_space
= adapter
->tx_fifo_size
- adapter
->tx_fifo_head
;
3053 u32 skb_fifo_len
= skb
->len
+ E1000_FIFO_HDR
;
3055 skb_fifo_len
= ALIGN(skb_fifo_len
, E1000_FIFO_HDR
);
3057 if (adapter
->link_duplex
!= HALF_DUPLEX
)
3058 goto no_fifo_stall_required
;
3060 if (atomic_read(&adapter
->tx_fifo_stall
))
3063 if (skb_fifo_len
>= (E1000_82547_PAD_LEN
+ fifo_space
)) {
3064 atomic_set(&adapter
->tx_fifo_stall
, 1);
3068 no_fifo_stall_required
:
3069 adapter
->tx_fifo_head
+= skb_fifo_len
;
3070 if (adapter
->tx_fifo_head
>= adapter
->tx_fifo_size
)
3071 adapter
->tx_fifo_head
-= adapter
->tx_fifo_size
;
3075 static int __e1000_maybe_stop_tx(struct net_device
*netdev
, int size
)
3077 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
3078 struct e1000_tx_ring
*tx_ring
= adapter
->tx_ring
;
3080 netif_stop_queue(netdev
);
3081 /* Herbert's original patch had:
3082 * smp_mb__after_netif_stop_queue();
3083 * but since that doesn't exist yet, just open code it. */
3086 /* We need to check again in a case another CPU has just
3087 * made room available. */
3088 if (likely(E1000_DESC_UNUSED(tx_ring
) < size
))
3092 netif_start_queue(netdev
);
3093 ++adapter
->restart_queue
;
3097 static int e1000_maybe_stop_tx(struct net_device
*netdev
,
3098 struct e1000_tx_ring
*tx_ring
, int size
)
3100 if (likely(E1000_DESC_UNUSED(tx_ring
) >= size
))
3102 return __e1000_maybe_stop_tx(netdev
, size
);
3105 #define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 )
3106 static netdev_tx_t
e1000_xmit_frame(struct sk_buff
*skb
,
3107 struct net_device
*netdev
)
3109 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
3110 struct e1000_hw
*hw
= &adapter
->hw
;
3111 struct e1000_tx_ring
*tx_ring
;
3112 unsigned int first
, max_per_txd
= E1000_MAX_DATA_PER_TXD
;
3113 unsigned int max_txd_pwr
= E1000_MAX_TXD_PWR
;
3114 unsigned int tx_flags
= 0;
3115 unsigned int len
= skb_headlen(skb
);
3116 unsigned int nr_frags
;
3122 /* This goes back to the question of how to logically map a tx queue
3123 * to a flow. Right now, performance is impacted slightly negatively
3124 * if using multiple tx queues. If the stack breaks away from a
3125 * single qdisc implementation, we can look at this again. */
3126 tx_ring
= adapter
->tx_ring
;
3128 if (unlikely(skb
->len
<= 0)) {
3129 dev_kfree_skb_any(skb
);
3130 return NETDEV_TX_OK
;
3133 mss
= skb_shinfo(skb
)->gso_size
;
3134 /* The controller does a simple calculation to
3135 * make sure there is enough room in the FIFO before
3136 * initiating the DMA for each buffer. The calc is:
3137 * 4 = ceil(buffer len/mss). To make sure we don't
3138 * overrun the FIFO, adjust the max buffer len if mss
3142 max_per_txd
= min(mss
<< 2, max_per_txd
);
3143 max_txd_pwr
= fls(max_per_txd
) - 1;
3145 hdr_len
= skb_transport_offset(skb
) + tcp_hdrlen(skb
);
3146 if (skb
->data_len
&& hdr_len
== len
) {
3147 switch (hw
->mac_type
) {
3148 unsigned int pull_size
;
3150 /* Make sure we have room to chop off 4 bytes,
3151 * and that the end alignment will work out to
3152 * this hardware's requirements
3153 * NOTE: this is a TSO only workaround
3154 * if end byte alignment not correct move us
3155 * into the next dword */
3156 if ((unsigned long)(skb_tail_pointer(skb
) - 1) & 4)
3159 pull_size
= min((unsigned int)4, skb
->data_len
);
3160 if (!__pskb_pull_tail(skb
, pull_size
)) {
3161 e_err(drv
, "__pskb_pull_tail "
3163 dev_kfree_skb_any(skb
);
3164 return NETDEV_TX_OK
;
3166 len
= skb_headlen(skb
);
3175 /* reserve a descriptor for the offload context */
3176 if ((mss
) || (skb
->ip_summed
== CHECKSUM_PARTIAL
))
3180 /* Controller Erratum workaround */
3181 if (!skb
->data_len
&& tx_ring
->last_tx_tso
&& !skb_is_gso(skb
))
3184 count
+= TXD_USE_COUNT(len
, max_txd_pwr
);
3186 if (adapter
->pcix_82544
)
3189 /* work-around for errata 10 and it applies to all controllers
3190 * in PCI-X mode, so add one more descriptor to the count
3192 if (unlikely((hw
->bus_type
== e1000_bus_type_pcix
) &&
3196 nr_frags
= skb_shinfo(skb
)->nr_frags
;
3197 for (f
= 0; f
< nr_frags
; f
++)
3198 count
+= TXD_USE_COUNT(skb_frag_size(&skb_shinfo(skb
)->frags
[f
]),
3200 if (adapter
->pcix_82544
)
3203 /* need: count + 2 desc gap to keep tail from touching
3204 * head, otherwise try next time */
3205 if (unlikely(e1000_maybe_stop_tx(netdev
, tx_ring
, count
+ 2)))
3206 return NETDEV_TX_BUSY
;
3208 if (unlikely((hw
->mac_type
== e1000_82547
) &&
3209 (e1000_82547_fifo_workaround(adapter
, skb
)))) {
3210 netif_stop_queue(netdev
);
3211 if (!test_bit(__E1000_DOWN
, &adapter
->flags
))
3212 schedule_delayed_work(&adapter
->fifo_stall_task
, 1);
3213 return NETDEV_TX_BUSY
;
3216 if (vlan_tx_tag_present(skb
)) {
3217 tx_flags
|= E1000_TX_FLAGS_VLAN
;
3218 tx_flags
|= (vlan_tx_tag_get(skb
) << E1000_TX_FLAGS_VLAN_SHIFT
);
3221 first
= tx_ring
->next_to_use
;
3223 tso
= e1000_tso(adapter
, tx_ring
, skb
);
3225 dev_kfree_skb_any(skb
);
3226 return NETDEV_TX_OK
;
3230 if (likely(hw
->mac_type
!= e1000_82544
))
3231 tx_ring
->last_tx_tso
= true;
3232 tx_flags
|= E1000_TX_FLAGS_TSO
;
3233 } else if (likely(e1000_tx_csum(adapter
, tx_ring
, skb
)))
3234 tx_flags
|= E1000_TX_FLAGS_CSUM
;
3236 if (likely(skb
->protocol
== htons(ETH_P_IP
)))
3237 tx_flags
|= E1000_TX_FLAGS_IPV4
;
3239 if (unlikely(skb
->no_fcs
))
3240 tx_flags
|= E1000_TX_FLAGS_NO_FCS
;
3242 count
= e1000_tx_map(adapter
, tx_ring
, skb
, first
, max_per_txd
,
3246 e1000_tx_queue(adapter
, tx_ring
, tx_flags
, count
);
3247 /* Make sure there is space in the ring for the next send. */
3248 e1000_maybe_stop_tx(netdev
, tx_ring
, MAX_SKB_FRAGS
+ 2);
3251 dev_kfree_skb_any(skb
);
3252 tx_ring
->buffer_info
[first
].time_stamp
= 0;
3253 tx_ring
->next_to_use
= first
;
3256 return NETDEV_TX_OK
;
3259 #define NUM_REGS 38 /* 1 based count */
3260 static void e1000_regdump(struct e1000_adapter
*adapter
)
3262 struct e1000_hw
*hw
= &adapter
->hw
;
3264 u32
*regs_buff
= regs
;
3267 static const char * const reg_name
[] = {
3269 "RCTL", "RDLEN", "RDH", "RDT", "RDTR",
3270 "TCTL", "TDBAL", "TDBAH", "TDLEN", "TDH", "TDT",
3271 "TIDV", "TXDCTL", "TADV", "TARC0",
3272 "TDBAL1", "TDBAH1", "TDLEN1", "TDH1", "TDT1",
3274 "CTRL_EXT", "ERT", "RDBAL", "RDBAH",
3275 "TDFH", "TDFT", "TDFHS", "TDFTS", "TDFPC",
3276 "RDFH", "RDFT", "RDFHS", "RDFTS", "RDFPC"
3279 regs_buff
[0] = er32(CTRL
);
3280 regs_buff
[1] = er32(STATUS
);
3282 regs_buff
[2] = er32(RCTL
);
3283 regs_buff
[3] = er32(RDLEN
);
3284 regs_buff
[4] = er32(RDH
);
3285 regs_buff
[5] = er32(RDT
);
3286 regs_buff
[6] = er32(RDTR
);
3288 regs_buff
[7] = er32(TCTL
);
3289 regs_buff
[8] = er32(TDBAL
);
3290 regs_buff
[9] = er32(TDBAH
);
3291 regs_buff
[10] = er32(TDLEN
);
3292 regs_buff
[11] = er32(TDH
);
3293 regs_buff
[12] = er32(TDT
);
3294 regs_buff
[13] = er32(TIDV
);
3295 regs_buff
[14] = er32(TXDCTL
);
3296 regs_buff
[15] = er32(TADV
);
3297 regs_buff
[16] = er32(TARC0
);
3299 regs_buff
[17] = er32(TDBAL1
);
3300 regs_buff
[18] = er32(TDBAH1
);
3301 regs_buff
[19] = er32(TDLEN1
);
3302 regs_buff
[20] = er32(TDH1
);
3303 regs_buff
[21] = er32(TDT1
);
3304 regs_buff
[22] = er32(TXDCTL1
);
3305 regs_buff
[23] = er32(TARC1
);
3306 regs_buff
[24] = er32(CTRL_EXT
);
3307 regs_buff
[25] = er32(ERT
);
3308 regs_buff
[26] = er32(RDBAL0
);
3309 regs_buff
[27] = er32(RDBAH0
);
3310 regs_buff
[28] = er32(TDFH
);
3311 regs_buff
[29] = er32(TDFT
);
3312 regs_buff
[30] = er32(TDFHS
);
3313 regs_buff
[31] = er32(TDFTS
);
3314 regs_buff
[32] = er32(TDFPC
);
3315 regs_buff
[33] = er32(RDFH
);
3316 regs_buff
[34] = er32(RDFT
);
3317 regs_buff
[35] = er32(RDFHS
);
3318 regs_buff
[36] = er32(RDFTS
);
3319 regs_buff
[37] = er32(RDFPC
);
3321 pr_info("Register dump\n");
3322 for (i
= 0; i
< NUM_REGS
; i
++)
3323 pr_info("%-15s %08x\n", reg_name
[i
], regs_buff
[i
]);
3327 * e1000_dump: Print registers, tx ring and rx ring
3329 static void e1000_dump(struct e1000_adapter
*adapter
)
3331 /* this code doesn't handle multiple rings */
3332 struct e1000_tx_ring
*tx_ring
= adapter
->tx_ring
;
3333 struct e1000_rx_ring
*rx_ring
= adapter
->rx_ring
;
3336 if (!netif_msg_hw(adapter
))
3339 /* Print Registers */
3340 e1000_regdump(adapter
);
3345 pr_info("TX Desc ring0 dump\n");
3347 /* Transmit Descriptor Formats - DEXT[29] is 0 (Legacy) or 1 (Extended)
3349 * Legacy Transmit Descriptor
3350 * +--------------------------------------------------------------+
3351 * 0 | Buffer Address [63:0] (Reserved on Write Back) |
3352 * +--------------------------------------------------------------+
3353 * 8 | Special | CSS | Status | CMD | CSO | Length |
3354 * +--------------------------------------------------------------+
3355 * 63 48 47 36 35 32 31 24 23 16 15 0
3357 * Extended Context Descriptor (DTYP=0x0) for TSO or checksum offload
3358 * 63 48 47 40 39 32 31 16 15 8 7 0
3359 * +----------------------------------------------------------------+
3360 * 0 | TUCSE | TUCS0 | TUCSS | IPCSE | IPCS0 | IPCSS |
3361 * +----------------------------------------------------------------+
3362 * 8 | MSS | HDRLEN | RSV | STA | TUCMD | DTYP | PAYLEN |
3363 * +----------------------------------------------------------------+
3364 * 63 48 47 40 39 36 35 32 31 24 23 20 19 0
3366 * Extended Data Descriptor (DTYP=0x1)
3367 * +----------------------------------------------------------------+
3368 * 0 | Buffer Address [63:0] |
3369 * +----------------------------------------------------------------+
3370 * 8 | VLAN tag | POPTS | Rsvd | Status | Command | DTYP | DTALEN |
3371 * +----------------------------------------------------------------+
3372 * 63 48 47 40 39 36 35 32 31 24 23 20 19 0
3374 pr_info("Tc[desc] [Ce CoCsIpceCoS] [MssHlRSCm0Plen] [bi->dma ] leng ntw timestmp bi->skb\n");
3375 pr_info("Td[desc] [address 63:0 ] [VlaPoRSCm1Dlen] [bi->dma ] leng ntw timestmp bi->skb\n");
3377 if (!netif_msg_tx_done(adapter
))
3378 goto rx_ring_summary
;
3380 for (i
= 0; tx_ring
->desc
&& (i
< tx_ring
->count
); i
++) {
3381 struct e1000_tx_desc
*tx_desc
= E1000_TX_DESC(*tx_ring
, i
);
3382 struct e1000_buffer
*buffer_info
= &tx_ring
->buffer_info
[i
];
3383 struct my_u
{ u64 a
; u64 b
; };
3384 struct my_u
*u
= (struct my_u
*)tx_desc
;
3387 if (i
== tx_ring
->next_to_use
&& i
== tx_ring
->next_to_clean
)
3389 else if (i
== tx_ring
->next_to_use
)
3391 else if (i
== tx_ring
->next_to_clean
)
3396 pr_info("T%c[0x%03X] %016llX %016llX %016llX %04X %3X %016llX %p %s\n",
3397 ((le64_to_cpu(u
->b
) & (1<<20)) ? 'd' : 'c'), i
,
3398 le64_to_cpu(u
->a
), le64_to_cpu(u
->b
),
3399 (u64
)buffer_info
->dma
, buffer_info
->length
,
3400 buffer_info
->next_to_watch
,
3401 (u64
)buffer_info
->time_stamp
, buffer_info
->skb
, type
);
3408 pr_info("\nRX Desc ring dump\n");
3410 /* Legacy Receive Descriptor Format
3412 * +-----------------------------------------------------+
3413 * | Buffer Address [63:0] |
3414 * +-----------------------------------------------------+
3415 * | VLAN Tag | Errors | Status 0 | Packet csum | Length |
3416 * +-----------------------------------------------------+
3417 * 63 48 47 40 39 32 31 16 15 0
3419 pr_info("R[desc] [address 63:0 ] [vl er S cks ln] [bi->dma ] [bi->skb]\n");
3421 if (!netif_msg_rx_status(adapter
))
3424 for (i
= 0; rx_ring
->desc
&& (i
< rx_ring
->count
); i
++) {
3425 struct e1000_rx_desc
*rx_desc
= E1000_RX_DESC(*rx_ring
, i
);
3426 struct e1000_buffer
*buffer_info
= &rx_ring
->buffer_info
[i
];
3427 struct my_u
{ u64 a
; u64 b
; };
3428 struct my_u
*u
= (struct my_u
*)rx_desc
;
3431 if (i
== rx_ring
->next_to_use
)
3433 else if (i
== rx_ring
->next_to_clean
)
3438 pr_info("R[0x%03X] %016llX %016llX %016llX %p %s\n",
3439 i
, le64_to_cpu(u
->a
), le64_to_cpu(u
->b
),
3440 (u64
)buffer_info
->dma
, buffer_info
->skb
, type
);
3443 /* dump the descriptor caches */
3445 pr_info("Rx descriptor cache in 64bit format\n");
3446 for (i
= 0x6000; i
<= 0x63FF ; i
+= 0x10) {
3447 pr_info("R%04X: %08X|%08X %08X|%08X\n",
3449 readl(adapter
->hw
.hw_addr
+ i
+4),
3450 readl(adapter
->hw
.hw_addr
+ i
),
3451 readl(adapter
->hw
.hw_addr
+ i
+12),
3452 readl(adapter
->hw
.hw_addr
+ i
+8));
3455 pr_info("Tx descriptor cache in 64bit format\n");
3456 for (i
= 0x7000; i
<= 0x73FF ; i
+= 0x10) {
3457 pr_info("T%04X: %08X|%08X %08X|%08X\n",
3459 readl(adapter
->hw
.hw_addr
+ i
+4),
3460 readl(adapter
->hw
.hw_addr
+ i
),
3461 readl(adapter
->hw
.hw_addr
+ i
+12),
3462 readl(adapter
->hw
.hw_addr
+ i
+8));
3469 * e1000_tx_timeout - Respond to a Tx Hang
3470 * @netdev: network interface device structure
3473 static void e1000_tx_timeout(struct net_device
*netdev
)
3475 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
3477 /* Do the reset outside of interrupt context */
3478 adapter
->tx_timeout_count
++;
3479 schedule_work(&adapter
->reset_task
);
3482 static void e1000_reset_task(struct work_struct
*work
)
3484 struct e1000_adapter
*adapter
=
3485 container_of(work
, struct e1000_adapter
, reset_task
);
3487 if (test_bit(__E1000_DOWN
, &adapter
->flags
))
3489 e_err(drv
, "Reset adapter\n");
3490 e1000_reinit_safe(adapter
);
3494 * e1000_get_stats - Get System Network Statistics
3495 * @netdev: network interface device structure
3497 * Returns the address of the device statistics structure.
3498 * The statistics are actually updated from the watchdog.
3501 static struct net_device_stats
*e1000_get_stats(struct net_device
*netdev
)
3503 /* only return the current stats */
3504 return &netdev
->stats
;
3508 * e1000_change_mtu - Change the Maximum Transfer Unit
3509 * @netdev: network interface device structure
3510 * @new_mtu: new value for maximum frame size
3512 * Returns 0 on success, negative on failure
3515 static int e1000_change_mtu(struct net_device
*netdev
, int new_mtu
)
3517 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
3518 struct e1000_hw
*hw
= &adapter
->hw
;
3519 int max_frame
= new_mtu
+ ENET_HEADER_SIZE
+ ETHERNET_FCS_SIZE
;
3521 if ((max_frame
< MINIMUM_ETHERNET_FRAME_SIZE
) ||
3522 (max_frame
> MAX_JUMBO_FRAME_SIZE
)) {
3523 e_err(probe
, "Invalid MTU setting\n");
3527 /* Adapter-specific max frame size limits. */
3528 switch (hw
->mac_type
) {
3529 case e1000_undefined
... e1000_82542_rev2_1
:
3530 if (max_frame
> (ETH_FRAME_LEN
+ ETH_FCS_LEN
)) {
3531 e_err(probe
, "Jumbo Frames not supported.\n");
3536 /* Capable of supporting up to MAX_JUMBO_FRAME_SIZE limit. */
3540 while (test_and_set_bit(__E1000_RESETTING
, &adapter
->flags
))
3542 /* e1000_down has a dependency on max_frame_size */
3543 hw
->max_frame_size
= max_frame
;
3544 if (netif_running(netdev
))
3545 e1000_down(adapter
);
3547 /* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
3548 * means we reserve 2 more, this pushes us to allocate from the next
3550 * i.e. RXBUFFER_2048 --> size-4096 slab
3551 * however with the new *_jumbo_rx* routines, jumbo receives will use
3552 * fragmented skbs */
3554 if (max_frame
<= E1000_RXBUFFER_2048
)
3555 adapter
->rx_buffer_len
= E1000_RXBUFFER_2048
;
3557 #if (PAGE_SIZE >= E1000_RXBUFFER_16384)
3558 adapter
->rx_buffer_len
= E1000_RXBUFFER_16384
;
3559 #elif (PAGE_SIZE >= E1000_RXBUFFER_4096)
3560 adapter
->rx_buffer_len
= PAGE_SIZE
;
3563 /* adjust allocation if LPE protects us, and we aren't using SBP */
3564 if (!hw
->tbi_compatibility_on
&&
3565 ((max_frame
== (ETH_FRAME_LEN
+ ETH_FCS_LEN
)) ||
3566 (max_frame
== MAXIMUM_ETHERNET_VLAN_SIZE
)))
3567 adapter
->rx_buffer_len
= MAXIMUM_ETHERNET_VLAN_SIZE
;
3569 pr_info("%s changing MTU from %d to %d\n",
3570 netdev
->name
, netdev
->mtu
, new_mtu
);
3571 netdev
->mtu
= new_mtu
;
3573 if (netif_running(netdev
))
3576 e1000_reset(adapter
);
3578 clear_bit(__E1000_RESETTING
, &adapter
->flags
);
3584 * e1000_update_stats - Update the board statistics counters
3585 * @adapter: board private structure
3588 void e1000_update_stats(struct e1000_adapter
*adapter
)
3590 struct net_device
*netdev
= adapter
->netdev
;
3591 struct e1000_hw
*hw
= &adapter
->hw
;
3592 struct pci_dev
*pdev
= adapter
->pdev
;
3593 unsigned long flags
;
3596 #define PHY_IDLE_ERROR_COUNT_MASK 0x00FF
3599 * Prevent stats update while adapter is being reset, or if the pci
3600 * connection is down.
3602 if (adapter
->link_speed
== 0)
3604 if (pci_channel_offline(pdev
))
3607 spin_lock_irqsave(&adapter
->stats_lock
, flags
);
3609 /* these counters are modified from e1000_tbi_adjust_stats,
3610 * called from the interrupt context, so they must only
3611 * be written while holding adapter->stats_lock
3614 adapter
->stats
.crcerrs
+= er32(CRCERRS
);
3615 adapter
->stats
.gprc
+= er32(GPRC
);
3616 adapter
->stats
.gorcl
+= er32(GORCL
);
3617 adapter
->stats
.gorch
+= er32(GORCH
);
3618 adapter
->stats
.bprc
+= er32(BPRC
);
3619 adapter
->stats
.mprc
+= er32(MPRC
);
3620 adapter
->stats
.roc
+= er32(ROC
);
3622 adapter
->stats
.prc64
+= er32(PRC64
);
3623 adapter
->stats
.prc127
+= er32(PRC127
);
3624 adapter
->stats
.prc255
+= er32(PRC255
);
3625 adapter
->stats
.prc511
+= er32(PRC511
);
3626 adapter
->stats
.prc1023
+= er32(PRC1023
);
3627 adapter
->stats
.prc1522
+= er32(PRC1522
);
3629 adapter
->stats
.symerrs
+= er32(SYMERRS
);
3630 adapter
->stats
.mpc
+= er32(MPC
);
3631 adapter
->stats
.scc
+= er32(SCC
);
3632 adapter
->stats
.ecol
+= er32(ECOL
);
3633 adapter
->stats
.mcc
+= er32(MCC
);
3634 adapter
->stats
.latecol
+= er32(LATECOL
);
3635 adapter
->stats
.dc
+= er32(DC
);
3636 adapter
->stats
.sec
+= er32(SEC
);
3637 adapter
->stats
.rlec
+= er32(RLEC
);
3638 adapter
->stats
.xonrxc
+= er32(XONRXC
);
3639 adapter
->stats
.xontxc
+= er32(XONTXC
);
3640 adapter
->stats
.xoffrxc
+= er32(XOFFRXC
);
3641 adapter
->stats
.xofftxc
+= er32(XOFFTXC
);
3642 adapter
->stats
.fcruc
+= er32(FCRUC
);
3643 adapter
->stats
.gptc
+= er32(GPTC
);
3644 adapter
->stats
.gotcl
+= er32(GOTCL
);
3645 adapter
->stats
.gotch
+= er32(GOTCH
);
3646 adapter
->stats
.rnbc
+= er32(RNBC
);
3647 adapter
->stats
.ruc
+= er32(RUC
);
3648 adapter
->stats
.rfc
+= er32(RFC
);
3649 adapter
->stats
.rjc
+= er32(RJC
);
3650 adapter
->stats
.torl
+= er32(TORL
);
3651 adapter
->stats
.torh
+= er32(TORH
);
3652 adapter
->stats
.totl
+= er32(TOTL
);
3653 adapter
->stats
.toth
+= er32(TOTH
);
3654 adapter
->stats
.tpr
+= er32(TPR
);
3656 adapter
->stats
.ptc64
+= er32(PTC64
);
3657 adapter
->stats
.ptc127
+= er32(PTC127
);
3658 adapter
->stats
.ptc255
+= er32(PTC255
);
3659 adapter
->stats
.ptc511
+= er32(PTC511
);
3660 adapter
->stats
.ptc1023
+= er32(PTC1023
);
3661 adapter
->stats
.ptc1522
+= er32(PTC1522
);
3663 adapter
->stats
.mptc
+= er32(MPTC
);
3664 adapter
->stats
.bptc
+= er32(BPTC
);
3666 /* used for adaptive IFS */
3668 hw
->tx_packet_delta
= er32(TPT
);
3669 adapter
->stats
.tpt
+= hw
->tx_packet_delta
;
3670 hw
->collision_delta
= er32(COLC
);
3671 adapter
->stats
.colc
+= hw
->collision_delta
;
3673 if (hw
->mac_type
>= e1000_82543
) {
3674 adapter
->stats
.algnerrc
+= er32(ALGNERRC
);
3675 adapter
->stats
.rxerrc
+= er32(RXERRC
);
3676 adapter
->stats
.tncrs
+= er32(TNCRS
);
3677 adapter
->stats
.cexterr
+= er32(CEXTERR
);
3678 adapter
->stats
.tsctc
+= er32(TSCTC
);
3679 adapter
->stats
.tsctfc
+= er32(TSCTFC
);
3682 /* Fill out the OS statistics structure */
3683 netdev
->stats
.multicast
= adapter
->stats
.mprc
;
3684 netdev
->stats
.collisions
= adapter
->stats
.colc
;
3688 /* RLEC on some newer hardware can be incorrect so build
3689 * our own version based on RUC and ROC */
3690 netdev
->stats
.rx_errors
= adapter
->stats
.rxerrc
+
3691 adapter
->stats
.crcerrs
+ adapter
->stats
.algnerrc
+
3692 adapter
->stats
.ruc
+ adapter
->stats
.roc
+
3693 adapter
->stats
.cexterr
;
3694 adapter
->stats
.rlerrc
= adapter
->stats
.ruc
+ adapter
->stats
.roc
;
3695 netdev
->stats
.rx_length_errors
= adapter
->stats
.rlerrc
;
3696 netdev
->stats
.rx_crc_errors
= adapter
->stats
.crcerrs
;
3697 netdev
->stats
.rx_frame_errors
= adapter
->stats
.algnerrc
;
3698 netdev
->stats
.rx_missed_errors
= adapter
->stats
.mpc
;
3701 adapter
->stats
.txerrc
= adapter
->stats
.ecol
+ adapter
->stats
.latecol
;
3702 netdev
->stats
.tx_errors
= adapter
->stats
.txerrc
;
3703 netdev
->stats
.tx_aborted_errors
= adapter
->stats
.ecol
;
3704 netdev
->stats
.tx_window_errors
= adapter
->stats
.latecol
;
3705 netdev
->stats
.tx_carrier_errors
= adapter
->stats
.tncrs
;
3706 if (hw
->bad_tx_carr_stats_fd
&&
3707 adapter
->link_duplex
== FULL_DUPLEX
) {
3708 netdev
->stats
.tx_carrier_errors
= 0;
3709 adapter
->stats
.tncrs
= 0;
3712 /* Tx Dropped needs to be maintained elsewhere */
3715 if (hw
->media_type
== e1000_media_type_copper
) {
3716 if ((adapter
->link_speed
== SPEED_1000
) &&
3717 (!e1000_read_phy_reg(hw
, PHY_1000T_STATUS
, &phy_tmp
))) {
3718 phy_tmp
&= PHY_IDLE_ERROR_COUNT_MASK
;
3719 adapter
->phy_stats
.idle_errors
+= phy_tmp
;
3722 if ((hw
->mac_type
<= e1000_82546
) &&
3723 (hw
->phy_type
== e1000_phy_m88
) &&
3724 !e1000_read_phy_reg(hw
, M88E1000_RX_ERR_CNTR
, &phy_tmp
))
3725 adapter
->phy_stats
.receive_errors
+= phy_tmp
;
3728 /* Management Stats */
3729 if (hw
->has_smbus
) {
3730 adapter
->stats
.mgptc
+= er32(MGTPTC
);
3731 adapter
->stats
.mgprc
+= er32(MGTPRC
);
3732 adapter
->stats
.mgpdc
+= er32(MGTPDC
);
3735 spin_unlock_irqrestore(&adapter
->stats_lock
, flags
);
3739 * e1000_intr - Interrupt Handler
3740 * @irq: interrupt number
3741 * @data: pointer to a network interface device structure
3744 static irqreturn_t
e1000_intr(int irq
, void *data
)
3746 struct net_device
*netdev
= data
;
3747 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
3748 struct e1000_hw
*hw
= &adapter
->hw
;
3749 u32 icr
= er32(ICR
);
3751 if (unlikely((!icr
)))
3752 return IRQ_NONE
; /* Not our interrupt */
3755 * we might have caused the interrupt, but the above
3756 * read cleared it, and just in case the driver is
3757 * down there is nothing to do so return handled
3759 if (unlikely(test_bit(__E1000_DOWN
, &adapter
->flags
)))
3762 if (unlikely(icr
& (E1000_ICR_RXSEQ
| E1000_ICR_LSC
))) {
3763 hw
->get_link_status
= 1;
3764 /* guard against interrupt when we're going down */
3765 if (!test_bit(__E1000_DOWN
, &adapter
->flags
))
3766 schedule_delayed_work(&adapter
->watchdog_task
, 1);
3769 /* disable interrupts, without the synchronize_irq bit */
3771 E1000_WRITE_FLUSH();
3773 if (likely(napi_schedule_prep(&adapter
->napi
))) {
3774 adapter
->total_tx_bytes
= 0;
3775 adapter
->total_tx_packets
= 0;
3776 adapter
->total_rx_bytes
= 0;
3777 adapter
->total_rx_packets
= 0;
3778 __napi_schedule(&adapter
->napi
);
3780 /* this really should not happen! if it does it is basically a
3781 * bug, but not a hard error, so enable ints and continue */
3782 if (!test_bit(__E1000_DOWN
, &adapter
->flags
))
3783 e1000_irq_enable(adapter
);
3790 * e1000_clean - NAPI Rx polling callback
3791 * @adapter: board private structure
3793 static int e1000_clean(struct napi_struct
*napi
, int budget
)
3795 struct e1000_adapter
*adapter
= container_of(napi
, struct e1000_adapter
, napi
);
3796 int tx_clean_complete
= 0, work_done
= 0;
3798 tx_clean_complete
= e1000_clean_tx_irq(adapter
, &adapter
->tx_ring
[0]);
3800 adapter
->clean_rx(adapter
, &adapter
->rx_ring
[0], &work_done
, budget
);
3802 if (!tx_clean_complete
)
3805 /* If budget not fully consumed, exit the polling mode */
3806 if (work_done
< budget
) {
3807 if (likely(adapter
->itr_setting
& 3))
3808 e1000_set_itr(adapter
);
3809 napi_complete(napi
);
3810 if (!test_bit(__E1000_DOWN
, &adapter
->flags
))
3811 e1000_irq_enable(adapter
);
3818 * e1000_clean_tx_irq - Reclaim resources after transmit completes
3819 * @adapter: board private structure
3821 static bool e1000_clean_tx_irq(struct e1000_adapter
*adapter
,
3822 struct e1000_tx_ring
*tx_ring
)
3824 struct e1000_hw
*hw
= &adapter
->hw
;
3825 struct net_device
*netdev
= adapter
->netdev
;
3826 struct e1000_tx_desc
*tx_desc
, *eop_desc
;
3827 struct e1000_buffer
*buffer_info
;
3828 unsigned int i
, eop
;
3829 unsigned int count
= 0;
3830 unsigned int total_tx_bytes
=0, total_tx_packets
=0;
3832 i
= tx_ring
->next_to_clean
;
3833 eop
= tx_ring
->buffer_info
[i
].next_to_watch
;
3834 eop_desc
= E1000_TX_DESC(*tx_ring
, eop
);
3836 while ((eop_desc
->upper
.data
& cpu_to_le32(E1000_TXD_STAT_DD
)) &&
3837 (count
< tx_ring
->count
)) {
3838 bool cleaned
= false;
3839 rmb(); /* read buffer_info after eop_desc */
3840 for ( ; !cleaned
; count
++) {
3841 tx_desc
= E1000_TX_DESC(*tx_ring
, i
);
3842 buffer_info
= &tx_ring
->buffer_info
[i
];
3843 cleaned
= (i
== eop
);
3846 total_tx_packets
+= buffer_info
->segs
;
3847 total_tx_bytes
+= buffer_info
->bytecount
;
3849 e1000_unmap_and_free_tx_resource(adapter
, buffer_info
);
3850 tx_desc
->upper
.data
= 0;
3852 if (unlikely(++i
== tx_ring
->count
)) i
= 0;
3855 eop
= tx_ring
->buffer_info
[i
].next_to_watch
;
3856 eop_desc
= E1000_TX_DESC(*tx_ring
, eop
);
3859 tx_ring
->next_to_clean
= i
;
3861 #define TX_WAKE_THRESHOLD 32
3862 if (unlikely(count
&& netif_carrier_ok(netdev
) &&
3863 E1000_DESC_UNUSED(tx_ring
) >= TX_WAKE_THRESHOLD
)) {
3864 /* Make sure that anybody stopping the queue after this
3865 * sees the new next_to_clean.
3869 if (netif_queue_stopped(netdev
) &&
3870 !(test_bit(__E1000_DOWN
, &adapter
->flags
))) {
3871 netif_wake_queue(netdev
);
3872 ++adapter
->restart_queue
;
3876 if (adapter
->detect_tx_hung
) {
3877 /* Detect a transmit hang in hardware, this serializes the
3878 * check with the clearing of time_stamp and movement of i */
3879 adapter
->detect_tx_hung
= false;
3880 if (tx_ring
->buffer_info
[eop
].time_stamp
&&
3881 time_after(jiffies
, tx_ring
->buffer_info
[eop
].time_stamp
+
3882 (adapter
->tx_timeout_factor
* HZ
)) &&
3883 !(er32(STATUS
) & E1000_STATUS_TXOFF
)) {
3885 /* detected Tx unit hang */
3886 e_err(drv
, "Detected Tx Unit Hang\n"
3890 " next_to_use <%x>\n"
3891 " next_to_clean <%x>\n"
3892 "buffer_info[next_to_clean]\n"
3893 " time_stamp <%lx>\n"
3894 " next_to_watch <%x>\n"
3896 " next_to_watch.status <%x>\n",
3897 (unsigned long)((tx_ring
- adapter
->tx_ring
) /
3898 sizeof(struct e1000_tx_ring
)),
3899 readl(hw
->hw_addr
+ tx_ring
->tdh
),
3900 readl(hw
->hw_addr
+ tx_ring
->tdt
),
3901 tx_ring
->next_to_use
,
3902 tx_ring
->next_to_clean
,
3903 tx_ring
->buffer_info
[eop
].time_stamp
,
3906 eop_desc
->upper
.fields
.status
);
3907 e1000_dump(adapter
);
3908 netif_stop_queue(netdev
);
3911 adapter
->total_tx_bytes
+= total_tx_bytes
;
3912 adapter
->total_tx_packets
+= total_tx_packets
;
3913 netdev
->stats
.tx_bytes
+= total_tx_bytes
;
3914 netdev
->stats
.tx_packets
+= total_tx_packets
;
3915 return count
< tx_ring
->count
;
3919 * e1000_rx_checksum - Receive Checksum Offload for 82543
3920 * @adapter: board private structure
3921 * @status_err: receive descriptor status and error fields
3922 * @csum: receive descriptor csum field
3923 * @sk_buff: socket buffer with received data
3926 static void e1000_rx_checksum(struct e1000_adapter
*adapter
, u32 status_err
,
3927 u32 csum
, struct sk_buff
*skb
)
3929 struct e1000_hw
*hw
= &adapter
->hw
;
3930 u16 status
= (u16
)status_err
;
3931 u8 errors
= (u8
)(status_err
>> 24);
3933 skb_checksum_none_assert(skb
);
3935 /* 82543 or newer only */
3936 if (unlikely(hw
->mac_type
< e1000_82543
)) return;
3937 /* Ignore Checksum bit is set */
3938 if (unlikely(status
& E1000_RXD_STAT_IXSM
)) return;
3939 /* TCP/UDP checksum error bit is set */
3940 if (unlikely(errors
& E1000_RXD_ERR_TCPE
)) {
3941 /* let the stack verify checksum errors */
3942 adapter
->hw_csum_err
++;
3945 /* TCP/UDP Checksum has not been calculated */
3946 if (!(status
& E1000_RXD_STAT_TCPCS
))
3949 /* It must be a TCP or UDP packet with a valid checksum */
3950 if (likely(status
& E1000_RXD_STAT_TCPCS
)) {
3951 /* TCP checksum is good */
3952 skb
->ip_summed
= CHECKSUM_UNNECESSARY
;
3954 adapter
->hw_csum_good
++;
3958 * e1000_consume_page - helper function
3960 static void e1000_consume_page(struct e1000_buffer
*bi
, struct sk_buff
*skb
,
3965 skb
->data_len
+= length
;
3966 skb
->truesize
+= PAGE_SIZE
;
3970 * e1000_receive_skb - helper function to handle rx indications
3971 * @adapter: board private structure
3972 * @status: descriptor status field as written by hardware
3973 * @vlan: descriptor vlan field as written by hardware (no le/be conversion)
3974 * @skb: pointer to sk_buff to be indicated to stack
3976 static void e1000_receive_skb(struct e1000_adapter
*adapter
, u8 status
,
3977 __le16 vlan
, struct sk_buff
*skb
)
3979 skb
->protocol
= eth_type_trans(skb
, adapter
->netdev
);
3981 if (status
& E1000_RXD_STAT_VP
) {
3982 u16 vid
= le16_to_cpu(vlan
) & E1000_RXD_SPC_VLAN_MASK
;
3984 __vlan_hwaccel_put_tag(skb
, vid
);
3986 napi_gro_receive(&adapter
->napi
, skb
);
3990 * e1000_clean_jumbo_rx_irq - Send received data up the network stack; legacy
3991 * @adapter: board private structure
3992 * @rx_ring: ring to clean
3993 * @work_done: amount of napi work completed this call
3994 * @work_to_do: max amount of work allowed for this call to do
3996 * the return value indicates whether actual cleaning was done, there
3997 * is no guarantee that everything was cleaned
3999 static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter
*adapter
,
4000 struct e1000_rx_ring
*rx_ring
,
4001 int *work_done
, int work_to_do
)
4003 struct e1000_hw
*hw
= &adapter
->hw
;
4004 struct net_device
*netdev
= adapter
->netdev
;
4005 struct pci_dev
*pdev
= adapter
->pdev
;
4006 struct e1000_rx_desc
*rx_desc
, *next_rxd
;
4007 struct e1000_buffer
*buffer_info
, *next_buffer
;
4008 unsigned long irq_flags
;
4011 int cleaned_count
= 0;
4012 bool cleaned
= false;
4013 unsigned int total_rx_bytes
=0, total_rx_packets
=0;
4015 i
= rx_ring
->next_to_clean
;
4016 rx_desc
= E1000_RX_DESC(*rx_ring
, i
);
4017 buffer_info
= &rx_ring
->buffer_info
[i
];
4019 while (rx_desc
->status
& E1000_RXD_STAT_DD
) {
4020 struct sk_buff
*skb
;
4023 if (*work_done
>= work_to_do
)
4026 rmb(); /* read descriptor and rx_buffer_info after status DD */
4028 status
= rx_desc
->status
;
4029 skb
= buffer_info
->skb
;
4030 buffer_info
->skb
= NULL
;
4032 if (++i
== rx_ring
->count
) i
= 0;
4033 next_rxd
= E1000_RX_DESC(*rx_ring
, i
);
4036 next_buffer
= &rx_ring
->buffer_info
[i
];
4040 dma_unmap_page(&pdev
->dev
, buffer_info
->dma
,
4041 buffer_info
->length
, DMA_FROM_DEVICE
);
4042 buffer_info
->dma
= 0;
4044 length
= le16_to_cpu(rx_desc
->length
);
4046 /* errors is only valid for DD + EOP descriptors */
4047 if (unlikely((status
& E1000_RXD_STAT_EOP
) &&
4048 (rx_desc
->errors
& E1000_RXD_ERR_FRAME_ERR_MASK
))) {
4049 u8 last_byte
= *(skb
->data
+ length
- 1);
4050 if (TBI_ACCEPT(hw
, status
, rx_desc
->errors
, length
,
4052 spin_lock_irqsave(&adapter
->stats_lock
,
4054 e1000_tbi_adjust_stats(hw
, &adapter
->stats
,
4056 spin_unlock_irqrestore(&adapter
->stats_lock
,
4060 /* recycle both page and skb */
4061 buffer_info
->skb
= skb
;
4062 /* an error means any chain goes out the window
4064 if (rx_ring
->rx_skb_top
)
4065 dev_kfree_skb(rx_ring
->rx_skb_top
);
4066 rx_ring
->rx_skb_top
= NULL
;
4071 #define rxtop rx_ring->rx_skb_top
4072 if (!(status
& E1000_RXD_STAT_EOP
)) {
4073 /* this descriptor is only the beginning (or middle) */
4075 /* this is the beginning of a chain */
4077 skb_fill_page_desc(rxtop
, 0, buffer_info
->page
,
4080 /* this is the middle of a chain */
4081 skb_fill_page_desc(rxtop
,
4082 skb_shinfo(rxtop
)->nr_frags
,
4083 buffer_info
->page
, 0, length
);
4084 /* re-use the skb, only consumed the page */
4085 buffer_info
->skb
= skb
;
4087 e1000_consume_page(buffer_info
, rxtop
, length
);
4091 /* end of the chain */
4092 skb_fill_page_desc(rxtop
,
4093 skb_shinfo(rxtop
)->nr_frags
,
4094 buffer_info
->page
, 0, length
);
4095 /* re-use the current skb, we only consumed the
4097 buffer_info
->skb
= skb
;
4100 e1000_consume_page(buffer_info
, skb
, length
);
4102 /* no chain, got EOP, this buf is the packet
4103 * copybreak to save the put_page/alloc_page */
4104 if (length
<= copybreak
&&
4105 skb_tailroom(skb
) >= length
) {
4107 vaddr
= kmap_atomic(buffer_info
->page
);
4108 memcpy(skb_tail_pointer(skb
), vaddr
, length
);
4109 kunmap_atomic(vaddr
);
4110 /* re-use the page, so don't erase
4111 * buffer_info->page */
4112 skb_put(skb
, length
);
4114 skb_fill_page_desc(skb
, 0,
4115 buffer_info
->page
, 0,
4117 e1000_consume_page(buffer_info
, skb
,
4123 /* Receive Checksum Offload XXX recompute due to CRC strip? */
4124 e1000_rx_checksum(adapter
,
4126 ((u32
)(rx_desc
->errors
) << 24),
4127 le16_to_cpu(rx_desc
->csum
), skb
);
4129 total_rx_bytes
+= (skb
->len
- 4); /* don't count FCS */
4130 if (likely(!(netdev
->features
& NETIF_F_RXFCS
)))
4131 pskb_trim(skb
, skb
->len
- 4);
4134 /* eth type trans needs skb->data to point to something */
4135 if (!pskb_may_pull(skb
, ETH_HLEN
)) {
4136 e_err(drv
, "pskb_may_pull failed.\n");
4141 e1000_receive_skb(adapter
, status
, rx_desc
->special
, skb
);
4144 rx_desc
->status
= 0;
4146 /* return some buffers to hardware, one at a time is too slow */
4147 if (unlikely(cleaned_count
>= E1000_RX_BUFFER_WRITE
)) {
4148 adapter
->alloc_rx_buf(adapter
, rx_ring
, cleaned_count
);
4152 /* use prefetched values */
4154 buffer_info
= next_buffer
;
4156 rx_ring
->next_to_clean
= i
;
4158 cleaned_count
= E1000_DESC_UNUSED(rx_ring
);
4160 adapter
->alloc_rx_buf(adapter
, rx_ring
, cleaned_count
);
4162 adapter
->total_rx_packets
+= total_rx_packets
;
4163 adapter
->total_rx_bytes
+= total_rx_bytes
;
4164 netdev
->stats
.rx_bytes
+= total_rx_bytes
;
4165 netdev
->stats
.rx_packets
+= total_rx_packets
;
4170 * this should improve performance for small packets with large amounts
4171 * of reassembly being done in the stack
4173 static void e1000_check_copybreak(struct net_device
*netdev
,
4174 struct e1000_buffer
*buffer_info
,
4175 u32 length
, struct sk_buff
**skb
)
4177 struct sk_buff
*new_skb
;
4179 if (length
> copybreak
)
4182 new_skb
= netdev_alloc_skb_ip_align(netdev
, length
);
4186 skb_copy_to_linear_data_offset(new_skb
, -NET_IP_ALIGN
,
4187 (*skb
)->data
- NET_IP_ALIGN
,
4188 length
+ NET_IP_ALIGN
);
4189 /* save the skb in buffer_info as good */
4190 buffer_info
->skb
= *skb
;
4195 * e1000_clean_rx_irq - Send received data up the network stack; legacy
4196 * @adapter: board private structure
4197 * @rx_ring: ring to clean
4198 * @work_done: amount of napi work completed this call
4199 * @work_to_do: max amount of work allowed for this call to do
4201 static bool e1000_clean_rx_irq(struct e1000_adapter
*adapter
,
4202 struct e1000_rx_ring
*rx_ring
,
4203 int *work_done
, int work_to_do
)
4205 struct e1000_hw
*hw
= &adapter
->hw
;
4206 struct net_device
*netdev
= adapter
->netdev
;
4207 struct pci_dev
*pdev
= adapter
->pdev
;
4208 struct e1000_rx_desc
*rx_desc
, *next_rxd
;
4209 struct e1000_buffer
*buffer_info
, *next_buffer
;
4210 unsigned long flags
;
4213 int cleaned_count
= 0;
4214 bool cleaned
= false;
4215 unsigned int total_rx_bytes
=0, total_rx_packets
=0;
4217 i
= rx_ring
->next_to_clean
;
4218 rx_desc
= E1000_RX_DESC(*rx_ring
, i
);
4219 buffer_info
= &rx_ring
->buffer_info
[i
];
4221 while (rx_desc
->status
& E1000_RXD_STAT_DD
) {
4222 struct sk_buff
*skb
;
4225 if (*work_done
>= work_to_do
)
4228 rmb(); /* read descriptor and rx_buffer_info after status DD */
4230 status
= rx_desc
->status
;
4231 skb
= buffer_info
->skb
;
4232 buffer_info
->skb
= NULL
;
4234 prefetch(skb
->data
- NET_IP_ALIGN
);
4236 if (++i
== rx_ring
->count
) i
= 0;
4237 next_rxd
= E1000_RX_DESC(*rx_ring
, i
);
4240 next_buffer
= &rx_ring
->buffer_info
[i
];
4244 dma_unmap_single(&pdev
->dev
, buffer_info
->dma
,
4245 buffer_info
->length
, DMA_FROM_DEVICE
);
4246 buffer_info
->dma
= 0;
4248 length
= le16_to_cpu(rx_desc
->length
);
4249 /* !EOP means multiple descriptors were used to store a single
4250 * packet, if thats the case we need to toss it. In fact, we
4251 * to toss every packet with the EOP bit clear and the next
4252 * frame that _does_ have the EOP bit set, as it is by
4253 * definition only a frame fragment
4255 if (unlikely(!(status
& E1000_RXD_STAT_EOP
)))
4256 adapter
->discarding
= true;
4258 if (adapter
->discarding
) {
4259 /* All receives must fit into a single buffer */
4260 e_dbg("Receive packet consumed multiple buffers\n");
4262 buffer_info
->skb
= skb
;
4263 if (status
& E1000_RXD_STAT_EOP
)
4264 adapter
->discarding
= false;
4268 if (unlikely(rx_desc
->errors
& E1000_RXD_ERR_FRAME_ERR_MASK
)) {
4269 u8 last_byte
= *(skb
->data
+ length
- 1);
4270 if (TBI_ACCEPT(hw
, status
, rx_desc
->errors
, length
,
4272 spin_lock_irqsave(&adapter
->stats_lock
, flags
);
4273 e1000_tbi_adjust_stats(hw
, &adapter
->stats
,
4275 spin_unlock_irqrestore(&adapter
->stats_lock
,
4280 buffer_info
->skb
= skb
;
4285 total_rx_bytes
+= (length
- 4); /* don't count FCS */
4288 if (likely(!(netdev
->features
& NETIF_F_RXFCS
)))
4289 /* adjust length to remove Ethernet CRC, this must be
4290 * done after the TBI_ACCEPT workaround above
4294 e1000_check_copybreak(netdev
, buffer_info
, length
, &skb
);
4296 skb_put(skb
, length
);
4298 /* Receive Checksum Offload */
4299 e1000_rx_checksum(adapter
,
4301 ((u32
)(rx_desc
->errors
) << 24),
4302 le16_to_cpu(rx_desc
->csum
), skb
);
4304 e1000_receive_skb(adapter
, status
, rx_desc
->special
, skb
);
4307 rx_desc
->status
= 0;
4309 /* return some buffers to hardware, one at a time is too slow */
4310 if (unlikely(cleaned_count
>= E1000_RX_BUFFER_WRITE
)) {
4311 adapter
->alloc_rx_buf(adapter
, rx_ring
, cleaned_count
);
4315 /* use prefetched values */
4317 buffer_info
= next_buffer
;
4319 rx_ring
->next_to_clean
= i
;
4321 cleaned_count
= E1000_DESC_UNUSED(rx_ring
);
4323 adapter
->alloc_rx_buf(adapter
, rx_ring
, cleaned_count
);
4325 adapter
->total_rx_packets
+= total_rx_packets
;
4326 adapter
->total_rx_bytes
+= total_rx_bytes
;
4327 netdev
->stats
.rx_bytes
+= total_rx_bytes
;
4328 netdev
->stats
.rx_packets
+= total_rx_packets
;
4333 * e1000_alloc_jumbo_rx_buffers - Replace used jumbo receive buffers
4334 * @adapter: address of board private structure
4335 * @rx_ring: pointer to receive ring structure
4336 * @cleaned_count: number of buffers to allocate this pass
4340 e1000_alloc_jumbo_rx_buffers(struct e1000_adapter
*adapter
,
4341 struct e1000_rx_ring
*rx_ring
, int cleaned_count
)
4343 struct net_device
*netdev
= adapter
->netdev
;
4344 struct pci_dev
*pdev
= adapter
->pdev
;
4345 struct e1000_rx_desc
*rx_desc
;
4346 struct e1000_buffer
*buffer_info
;
4347 struct sk_buff
*skb
;
4349 unsigned int bufsz
= 256 - 16 /*for skb_reserve */ ;
4351 i
= rx_ring
->next_to_use
;
4352 buffer_info
= &rx_ring
->buffer_info
[i
];
4354 while (cleaned_count
--) {
4355 skb
= buffer_info
->skb
;
4361 skb
= netdev_alloc_skb_ip_align(netdev
, bufsz
);
4362 if (unlikely(!skb
)) {
4363 /* Better luck next round */
4364 adapter
->alloc_rx_buff_failed
++;
4368 /* Fix for errata 23, can't cross 64kB boundary */
4369 if (!e1000_check_64k_bound(adapter
, skb
->data
, bufsz
)) {
4370 struct sk_buff
*oldskb
= skb
;
4371 e_err(rx_err
, "skb align check failed: %u bytes at "
4372 "%p\n", bufsz
, skb
->data
);
4373 /* Try again, without freeing the previous */
4374 skb
= netdev_alloc_skb_ip_align(netdev
, bufsz
);
4375 /* Failed allocation, critical failure */
4377 dev_kfree_skb(oldskb
);
4378 adapter
->alloc_rx_buff_failed
++;
4382 if (!e1000_check_64k_bound(adapter
, skb
->data
, bufsz
)) {
4385 dev_kfree_skb(oldskb
);
4386 break; /* while (cleaned_count--) */
4389 /* Use new allocation */
4390 dev_kfree_skb(oldskb
);
4392 buffer_info
->skb
= skb
;
4393 buffer_info
->length
= adapter
->rx_buffer_len
;
4395 /* allocate a new page if necessary */
4396 if (!buffer_info
->page
) {
4397 buffer_info
->page
= alloc_page(GFP_ATOMIC
);
4398 if (unlikely(!buffer_info
->page
)) {
4399 adapter
->alloc_rx_buff_failed
++;
4404 if (!buffer_info
->dma
) {
4405 buffer_info
->dma
= dma_map_page(&pdev
->dev
,
4406 buffer_info
->page
, 0,
4407 buffer_info
->length
,
4409 if (dma_mapping_error(&pdev
->dev
, buffer_info
->dma
)) {
4410 put_page(buffer_info
->page
);
4412 buffer_info
->page
= NULL
;
4413 buffer_info
->skb
= NULL
;
4414 buffer_info
->dma
= 0;
4415 adapter
->alloc_rx_buff_failed
++;
4416 break; /* while !buffer_info->skb */
4420 rx_desc
= E1000_RX_DESC(*rx_ring
, i
);
4421 rx_desc
->buffer_addr
= cpu_to_le64(buffer_info
->dma
);
4423 if (unlikely(++i
== rx_ring
->count
))
4425 buffer_info
= &rx_ring
->buffer_info
[i
];
4428 if (likely(rx_ring
->next_to_use
!= i
)) {
4429 rx_ring
->next_to_use
= i
;
4430 if (unlikely(i
-- == 0))
4431 i
= (rx_ring
->count
- 1);
4433 /* Force memory writes to complete before letting h/w
4434 * know there are new descriptors to fetch. (Only
4435 * applicable for weak-ordered memory model archs,
4436 * such as IA-64). */
4438 writel(i
, adapter
->hw
.hw_addr
+ rx_ring
->rdt
);
4443 * e1000_alloc_rx_buffers - Replace used receive buffers; legacy & extended
4444 * @adapter: address of board private structure
4447 static void e1000_alloc_rx_buffers(struct e1000_adapter
*adapter
,
4448 struct e1000_rx_ring
*rx_ring
,
4451 struct e1000_hw
*hw
= &adapter
->hw
;
4452 struct net_device
*netdev
= adapter
->netdev
;
4453 struct pci_dev
*pdev
= adapter
->pdev
;
4454 struct e1000_rx_desc
*rx_desc
;
4455 struct e1000_buffer
*buffer_info
;
4456 struct sk_buff
*skb
;
4458 unsigned int bufsz
= adapter
->rx_buffer_len
;
4460 i
= rx_ring
->next_to_use
;
4461 buffer_info
= &rx_ring
->buffer_info
[i
];
4463 while (cleaned_count
--) {
4464 skb
= buffer_info
->skb
;
4470 skb
= netdev_alloc_skb_ip_align(netdev
, bufsz
);
4471 if (unlikely(!skb
)) {
4472 /* Better luck next round */
4473 adapter
->alloc_rx_buff_failed
++;
4477 /* Fix for errata 23, can't cross 64kB boundary */
4478 if (!e1000_check_64k_bound(adapter
, skb
->data
, bufsz
)) {
4479 struct sk_buff
*oldskb
= skb
;
4480 e_err(rx_err
, "skb align check failed: %u bytes at "
4481 "%p\n", bufsz
, skb
->data
);
4482 /* Try again, without freeing the previous */
4483 skb
= netdev_alloc_skb_ip_align(netdev
, bufsz
);
4484 /* Failed allocation, critical failure */
4486 dev_kfree_skb(oldskb
);
4487 adapter
->alloc_rx_buff_failed
++;
4491 if (!e1000_check_64k_bound(adapter
, skb
->data
, bufsz
)) {
4494 dev_kfree_skb(oldskb
);
4495 adapter
->alloc_rx_buff_failed
++;
4496 break; /* while !buffer_info->skb */
4499 /* Use new allocation */
4500 dev_kfree_skb(oldskb
);
4502 buffer_info
->skb
= skb
;
4503 buffer_info
->length
= adapter
->rx_buffer_len
;
4505 buffer_info
->dma
= dma_map_single(&pdev
->dev
,
4507 buffer_info
->length
,
4509 if (dma_mapping_error(&pdev
->dev
, buffer_info
->dma
)) {
4511 buffer_info
->skb
= NULL
;
4512 buffer_info
->dma
= 0;
4513 adapter
->alloc_rx_buff_failed
++;
4514 break; /* while !buffer_info->skb */
4518 * XXX if it was allocated cleanly it will never map to a
4522 /* Fix for errata 23, can't cross 64kB boundary */
4523 if (!e1000_check_64k_bound(adapter
,
4524 (void *)(unsigned long)buffer_info
->dma
,
4525 adapter
->rx_buffer_len
)) {
4526 e_err(rx_err
, "dma align check failed: %u bytes at "
4527 "%p\n", adapter
->rx_buffer_len
,
4528 (void *)(unsigned long)buffer_info
->dma
);
4530 buffer_info
->skb
= NULL
;
4532 dma_unmap_single(&pdev
->dev
, buffer_info
->dma
,
4533 adapter
->rx_buffer_len
,
4535 buffer_info
->dma
= 0;
4537 adapter
->alloc_rx_buff_failed
++;
4538 break; /* while !buffer_info->skb */
4540 rx_desc
= E1000_RX_DESC(*rx_ring
, i
);
4541 rx_desc
->buffer_addr
= cpu_to_le64(buffer_info
->dma
);
4543 if (unlikely(++i
== rx_ring
->count
))
4545 buffer_info
= &rx_ring
->buffer_info
[i
];
4548 if (likely(rx_ring
->next_to_use
!= i
)) {
4549 rx_ring
->next_to_use
= i
;
4550 if (unlikely(i
-- == 0))
4551 i
= (rx_ring
->count
- 1);
4553 /* Force memory writes to complete before letting h/w
4554 * know there are new descriptors to fetch. (Only
4555 * applicable for weak-ordered memory model archs,
4556 * such as IA-64). */
4558 writel(i
, hw
->hw_addr
+ rx_ring
->rdt
);
4563 * e1000_smartspeed - Workaround for SmartSpeed on 82541 and 82547 controllers.
4567 static void e1000_smartspeed(struct e1000_adapter
*adapter
)
4569 struct e1000_hw
*hw
= &adapter
->hw
;
4573 if ((hw
->phy_type
!= e1000_phy_igp
) || !hw
->autoneg
||
4574 !(hw
->autoneg_advertised
& ADVERTISE_1000_FULL
))
4577 if (adapter
->smartspeed
== 0) {
4578 /* If Master/Slave config fault is asserted twice,
4579 * we assume back-to-back */
4580 e1000_read_phy_reg(hw
, PHY_1000T_STATUS
, &phy_status
);
4581 if (!(phy_status
& SR_1000T_MS_CONFIG_FAULT
)) return;
4582 e1000_read_phy_reg(hw
, PHY_1000T_STATUS
, &phy_status
);
4583 if (!(phy_status
& SR_1000T_MS_CONFIG_FAULT
)) return;
4584 e1000_read_phy_reg(hw
, PHY_1000T_CTRL
, &phy_ctrl
);
4585 if (phy_ctrl
& CR_1000T_MS_ENABLE
) {
4586 phy_ctrl
&= ~CR_1000T_MS_ENABLE
;
4587 e1000_write_phy_reg(hw
, PHY_1000T_CTRL
,
4589 adapter
->smartspeed
++;
4590 if (!e1000_phy_setup_autoneg(hw
) &&
4591 !e1000_read_phy_reg(hw
, PHY_CTRL
,
4593 phy_ctrl
|= (MII_CR_AUTO_NEG_EN
|
4594 MII_CR_RESTART_AUTO_NEG
);
4595 e1000_write_phy_reg(hw
, PHY_CTRL
,
4600 } else if (adapter
->smartspeed
== E1000_SMARTSPEED_DOWNSHIFT
) {
4601 /* If still no link, perhaps using 2/3 pair cable */
4602 e1000_read_phy_reg(hw
, PHY_1000T_CTRL
, &phy_ctrl
);
4603 phy_ctrl
|= CR_1000T_MS_ENABLE
;
4604 e1000_write_phy_reg(hw
, PHY_1000T_CTRL
, phy_ctrl
);
4605 if (!e1000_phy_setup_autoneg(hw
) &&
4606 !e1000_read_phy_reg(hw
, PHY_CTRL
, &phy_ctrl
)) {
4607 phy_ctrl
|= (MII_CR_AUTO_NEG_EN
|
4608 MII_CR_RESTART_AUTO_NEG
);
4609 e1000_write_phy_reg(hw
, PHY_CTRL
, phy_ctrl
);
4612 /* Restart process after E1000_SMARTSPEED_MAX iterations */
4613 if (adapter
->smartspeed
++ == E1000_SMARTSPEED_MAX
)
4614 adapter
->smartspeed
= 0;
4624 static int e1000_ioctl(struct net_device
*netdev
, struct ifreq
*ifr
, int cmd
)
4630 return e1000_mii_ioctl(netdev
, ifr
, cmd
);
4643 static int e1000_mii_ioctl(struct net_device
*netdev
, struct ifreq
*ifr
,
4646 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
4647 struct e1000_hw
*hw
= &adapter
->hw
;
4648 struct mii_ioctl_data
*data
= if_mii(ifr
);
4651 unsigned long flags
;
4653 if (hw
->media_type
!= e1000_media_type_copper
)
4658 data
->phy_id
= hw
->phy_addr
;
4661 spin_lock_irqsave(&adapter
->stats_lock
, flags
);
4662 if (e1000_read_phy_reg(hw
, data
->reg_num
& 0x1F,
4664 spin_unlock_irqrestore(&adapter
->stats_lock
, flags
);
4667 spin_unlock_irqrestore(&adapter
->stats_lock
, flags
);
4670 if (data
->reg_num
& ~(0x1F))
4672 mii_reg
= data
->val_in
;
4673 spin_lock_irqsave(&adapter
->stats_lock
, flags
);
4674 if (e1000_write_phy_reg(hw
, data
->reg_num
,
4676 spin_unlock_irqrestore(&adapter
->stats_lock
, flags
);
4679 spin_unlock_irqrestore(&adapter
->stats_lock
, flags
);
4680 if (hw
->media_type
== e1000_media_type_copper
) {
4681 switch (data
->reg_num
) {
4683 if (mii_reg
& MII_CR_POWER_DOWN
)
4685 if (mii_reg
& MII_CR_AUTO_NEG_EN
) {
4687 hw
->autoneg_advertised
= 0x2F;
4692 else if (mii_reg
& 0x2000)
4696 retval
= e1000_set_spd_dplx(
4704 if (netif_running(adapter
->netdev
))
4705 e1000_reinit_locked(adapter
);
4707 e1000_reset(adapter
);
4709 case M88E1000_PHY_SPEC_CTRL
:
4710 case M88E1000_EXT_PHY_SPEC_CTRL
:
4711 if (e1000_phy_reset(hw
))
4716 switch (data
->reg_num
) {
4718 if (mii_reg
& MII_CR_POWER_DOWN
)
4720 if (netif_running(adapter
->netdev
))
4721 e1000_reinit_locked(adapter
);
4723 e1000_reset(adapter
);
4731 return E1000_SUCCESS
;
4734 void e1000_pci_set_mwi(struct e1000_hw
*hw
)
4736 struct e1000_adapter
*adapter
= hw
->back
;
4737 int ret_val
= pci_set_mwi(adapter
->pdev
);
4740 e_err(probe
, "Error in setting MWI\n");
4743 void e1000_pci_clear_mwi(struct e1000_hw
*hw
)
4745 struct e1000_adapter
*adapter
= hw
->back
;
4747 pci_clear_mwi(adapter
->pdev
);
4750 int e1000_pcix_get_mmrbc(struct e1000_hw
*hw
)
4752 struct e1000_adapter
*adapter
= hw
->back
;
4753 return pcix_get_mmrbc(adapter
->pdev
);
4756 void e1000_pcix_set_mmrbc(struct e1000_hw
*hw
, int mmrbc
)
4758 struct e1000_adapter
*adapter
= hw
->back
;
4759 pcix_set_mmrbc(adapter
->pdev
, mmrbc
);
4762 void e1000_io_write(struct e1000_hw
*hw
, unsigned long port
, u32 value
)
4767 static bool e1000_vlan_used(struct e1000_adapter
*adapter
)
4771 for_each_set_bit(vid
, adapter
->active_vlans
, VLAN_N_VID
)
4776 static void __e1000_vlan_mode(struct e1000_adapter
*adapter
,
4777 netdev_features_t features
)
4779 struct e1000_hw
*hw
= &adapter
->hw
;
4783 if (features
& NETIF_F_HW_VLAN_RX
) {
4784 /* enable VLAN tag insert/strip */
4785 ctrl
|= E1000_CTRL_VME
;
4787 /* disable VLAN tag insert/strip */
4788 ctrl
&= ~E1000_CTRL_VME
;
4792 static void e1000_vlan_filter_on_off(struct e1000_adapter
*adapter
,
4795 struct e1000_hw
*hw
= &adapter
->hw
;
4798 if (!test_bit(__E1000_DOWN
, &adapter
->flags
))
4799 e1000_irq_disable(adapter
);
4801 __e1000_vlan_mode(adapter
, adapter
->netdev
->features
);
4803 /* enable VLAN receive filtering */
4805 rctl
&= ~E1000_RCTL_CFIEN
;
4806 if (!(adapter
->netdev
->flags
& IFF_PROMISC
))
4807 rctl
|= E1000_RCTL_VFE
;
4809 e1000_update_mng_vlan(adapter
);
4811 /* disable VLAN receive filtering */
4813 rctl
&= ~E1000_RCTL_VFE
;
4817 if (!test_bit(__E1000_DOWN
, &adapter
->flags
))
4818 e1000_irq_enable(adapter
);
4821 static void e1000_vlan_mode(struct net_device
*netdev
,
4822 netdev_features_t features
)
4824 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
4826 if (!test_bit(__E1000_DOWN
, &adapter
->flags
))
4827 e1000_irq_disable(adapter
);
4829 __e1000_vlan_mode(adapter
, features
);
4831 if (!test_bit(__E1000_DOWN
, &adapter
->flags
))
4832 e1000_irq_enable(adapter
);
4835 static int e1000_vlan_rx_add_vid(struct net_device
*netdev
, u16 vid
)
4837 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
4838 struct e1000_hw
*hw
= &adapter
->hw
;
4841 if ((hw
->mng_cookie
.status
&
4842 E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT
) &&
4843 (vid
== adapter
->mng_vlan_id
))
4846 if (!e1000_vlan_used(adapter
))
4847 e1000_vlan_filter_on_off(adapter
, true);
4849 /* add VID to filter table */
4850 index
= (vid
>> 5) & 0x7F;
4851 vfta
= E1000_READ_REG_ARRAY(hw
, VFTA
, index
);
4852 vfta
|= (1 << (vid
& 0x1F));
4853 e1000_write_vfta(hw
, index
, vfta
);
4855 set_bit(vid
, adapter
->active_vlans
);
4860 static int e1000_vlan_rx_kill_vid(struct net_device
*netdev
, u16 vid
)
4862 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
4863 struct e1000_hw
*hw
= &adapter
->hw
;
4866 if (!test_bit(__E1000_DOWN
, &adapter
->flags
))
4867 e1000_irq_disable(adapter
);
4868 if (!test_bit(__E1000_DOWN
, &adapter
->flags
))
4869 e1000_irq_enable(adapter
);
4871 /* remove VID from filter table */
4872 index
= (vid
>> 5) & 0x7F;
4873 vfta
= E1000_READ_REG_ARRAY(hw
, VFTA
, index
);
4874 vfta
&= ~(1 << (vid
& 0x1F));
4875 e1000_write_vfta(hw
, index
, vfta
);
4877 clear_bit(vid
, adapter
->active_vlans
);
4879 if (!e1000_vlan_used(adapter
))
4880 e1000_vlan_filter_on_off(adapter
, false);
4885 static void e1000_restore_vlan(struct e1000_adapter
*adapter
)
4889 if (!e1000_vlan_used(adapter
))
4892 e1000_vlan_filter_on_off(adapter
, true);
4893 for_each_set_bit(vid
, adapter
->active_vlans
, VLAN_N_VID
)
4894 e1000_vlan_rx_add_vid(adapter
->netdev
, vid
);
4897 int e1000_set_spd_dplx(struct e1000_adapter
*adapter
, u32 spd
, u8 dplx
)
4899 struct e1000_hw
*hw
= &adapter
->hw
;
4903 /* Make sure dplx is at most 1 bit and lsb of speed is not set
4904 * for the switch() below to work */
4905 if ((spd
& 1) || (dplx
& ~1))
4908 /* Fiber NICs only allow 1000 gbps Full duplex */
4909 if ((hw
->media_type
== e1000_media_type_fiber
) &&
4910 spd
!= SPEED_1000
&&
4911 dplx
!= DUPLEX_FULL
)
4914 switch (spd
+ dplx
) {
4915 case SPEED_10
+ DUPLEX_HALF
:
4916 hw
->forced_speed_duplex
= e1000_10_half
;
4918 case SPEED_10
+ DUPLEX_FULL
:
4919 hw
->forced_speed_duplex
= e1000_10_full
;
4921 case SPEED_100
+ DUPLEX_HALF
:
4922 hw
->forced_speed_duplex
= e1000_100_half
;
4924 case SPEED_100
+ DUPLEX_FULL
:
4925 hw
->forced_speed_duplex
= e1000_100_full
;
4927 case SPEED_1000
+ DUPLEX_FULL
:
4929 hw
->autoneg_advertised
= ADVERTISE_1000_FULL
;
4931 case SPEED_1000
+ DUPLEX_HALF
: /* not supported */
4938 e_err(probe
, "Unsupported Speed/Duplex configuration\n");
4942 static int __e1000_shutdown(struct pci_dev
*pdev
, bool *enable_wake
)
4944 struct net_device
*netdev
= pci_get_drvdata(pdev
);
4945 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
4946 struct e1000_hw
*hw
= &adapter
->hw
;
4947 u32 ctrl
, ctrl_ext
, rctl
, status
;
4948 u32 wufc
= adapter
->wol
;
4953 netif_device_detach(netdev
);
4955 if (netif_running(netdev
)) {
4956 WARN_ON(test_bit(__E1000_RESETTING
, &adapter
->flags
));
4957 e1000_down(adapter
);
4961 retval
= pci_save_state(pdev
);
4966 status
= er32(STATUS
);
4967 if (status
& E1000_STATUS_LU
)
4968 wufc
&= ~E1000_WUFC_LNKC
;
4971 e1000_setup_rctl(adapter
);
4972 e1000_set_rx_mode(netdev
);
4976 /* turn on all-multi mode if wake on multicast is enabled */
4977 if (wufc
& E1000_WUFC_MC
)
4978 rctl
|= E1000_RCTL_MPE
;
4980 /* enable receives in the hardware */
4981 ew32(RCTL
, rctl
| E1000_RCTL_EN
);
4983 if (hw
->mac_type
>= e1000_82540
) {
4985 /* advertise wake from D3Cold */
4986 #define E1000_CTRL_ADVD3WUC 0x00100000
4987 /* phy power management enable */
4988 #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
4989 ctrl
|= E1000_CTRL_ADVD3WUC
|
4990 E1000_CTRL_EN_PHY_PWR_MGMT
;
4994 if (hw
->media_type
== e1000_media_type_fiber
||
4995 hw
->media_type
== e1000_media_type_internal_serdes
) {
4996 /* keep the laser running in D3 */
4997 ctrl_ext
= er32(CTRL_EXT
);
4998 ctrl_ext
|= E1000_CTRL_EXT_SDP7_DATA
;
4999 ew32(CTRL_EXT
, ctrl_ext
);
5002 ew32(WUC
, E1000_WUC_PME_EN
);
5009 e1000_release_manageability(adapter
);
5011 *enable_wake
= !!wufc
;
5013 /* make sure adapter isn't asleep if manageability is enabled */
5014 if (adapter
->en_mng_pt
)
5015 *enable_wake
= true;
5017 if (netif_running(netdev
))
5018 e1000_free_irq(adapter
);
5020 pci_disable_device(pdev
);
5026 static int e1000_suspend(struct pci_dev
*pdev
, pm_message_t state
)
5031 retval
= __e1000_shutdown(pdev
, &wake
);
5036 pci_prepare_to_sleep(pdev
);
5038 pci_wake_from_d3(pdev
, false);
5039 pci_set_power_state(pdev
, PCI_D3hot
);
5045 static int e1000_resume(struct pci_dev
*pdev
)
5047 struct net_device
*netdev
= pci_get_drvdata(pdev
);
5048 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
5049 struct e1000_hw
*hw
= &adapter
->hw
;
5052 pci_set_power_state(pdev
, PCI_D0
);
5053 pci_restore_state(pdev
);
5054 pci_save_state(pdev
);
5056 if (adapter
->need_ioport
)
5057 err
= pci_enable_device(pdev
);
5059 err
= pci_enable_device_mem(pdev
);
5061 pr_err("Cannot enable PCI device from suspend\n");
5064 pci_set_master(pdev
);
5066 pci_enable_wake(pdev
, PCI_D3hot
, 0);
5067 pci_enable_wake(pdev
, PCI_D3cold
, 0);
5069 if (netif_running(netdev
)) {
5070 err
= e1000_request_irq(adapter
);
5075 e1000_power_up_phy(adapter
);
5076 e1000_reset(adapter
);
5079 e1000_init_manageability(adapter
);
5081 if (netif_running(netdev
))
5084 netif_device_attach(netdev
);
5090 static void e1000_shutdown(struct pci_dev
*pdev
)
5094 __e1000_shutdown(pdev
, &wake
);
5096 if (system_state
== SYSTEM_POWER_OFF
) {
5097 pci_wake_from_d3(pdev
, wake
);
5098 pci_set_power_state(pdev
, PCI_D3hot
);
5102 #ifdef CONFIG_NET_POLL_CONTROLLER
5104 * Polling 'interrupt' - used by things like netconsole to send skbs
5105 * without having to re-enable interrupts. It's not called while
5106 * the interrupt routine is executing.
5108 static void e1000_netpoll(struct net_device
*netdev
)
5110 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
5112 disable_irq(adapter
->pdev
->irq
);
5113 e1000_intr(adapter
->pdev
->irq
, netdev
);
5114 enable_irq(adapter
->pdev
->irq
);
5119 * e1000_io_error_detected - called when PCI error is detected
5120 * @pdev: Pointer to PCI device
5121 * @state: The current pci connection state
5123 * This function is called after a PCI bus error affecting
5124 * this device has been detected.
5126 static pci_ers_result_t
e1000_io_error_detected(struct pci_dev
*pdev
,
5127 pci_channel_state_t state
)
5129 struct net_device
*netdev
= pci_get_drvdata(pdev
);
5130 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
5132 netif_device_detach(netdev
);
5134 if (state
== pci_channel_io_perm_failure
)
5135 return PCI_ERS_RESULT_DISCONNECT
;
5137 if (netif_running(netdev
))
5138 e1000_down(adapter
);
5139 pci_disable_device(pdev
);
5141 /* Request a slot slot reset. */
5142 return PCI_ERS_RESULT_NEED_RESET
;
5146 * e1000_io_slot_reset - called after the pci bus has been reset.
5147 * @pdev: Pointer to PCI device
5149 * Restart the card from scratch, as if from a cold-boot. Implementation
5150 * resembles the first-half of the e1000_resume routine.
5152 static pci_ers_result_t
e1000_io_slot_reset(struct pci_dev
*pdev
)
5154 struct net_device
*netdev
= pci_get_drvdata(pdev
);
5155 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
5156 struct e1000_hw
*hw
= &adapter
->hw
;
5159 if (adapter
->need_ioport
)
5160 err
= pci_enable_device(pdev
);
5162 err
= pci_enable_device_mem(pdev
);
5164 pr_err("Cannot re-enable PCI device after reset.\n");
5165 return PCI_ERS_RESULT_DISCONNECT
;
5167 pci_set_master(pdev
);
5169 pci_enable_wake(pdev
, PCI_D3hot
, 0);
5170 pci_enable_wake(pdev
, PCI_D3cold
, 0);
5172 e1000_reset(adapter
);
5175 return PCI_ERS_RESULT_RECOVERED
;
5179 * e1000_io_resume - called when traffic can start flowing again.
5180 * @pdev: Pointer to PCI device
5182 * This callback is called when the error recovery driver tells us that
5183 * its OK to resume normal operation. Implementation resembles the
5184 * second-half of the e1000_resume routine.
5186 static void e1000_io_resume(struct pci_dev
*pdev
)
5188 struct net_device
*netdev
= pci_get_drvdata(pdev
);
5189 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
5191 e1000_init_manageability(adapter
);
5193 if (netif_running(netdev
)) {
5194 if (e1000_up(adapter
)) {
5195 pr_info("can't bring device back up after reset\n");
5200 netif_device_attach(netdev
);