projects / deliverable / linux.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
Merge remote-tracking branch 'wireless-drivers-next/master'
[deliverable/linux.git] / drivers / net / ethernet / marvell / sky2.c
1 /*
2 * New driver for Marvell Yukon 2 chipset.
3 * Based on earlier sk98lin, and skge driver.
4 *
5 * This driver intentionally does not support all the features
6 * of the original driver such as link fail-over and link management because
7 * those should be done at higher levels.
8 *
9 * Copyright (C) 2005 Stephen Hemminger <shemminger@osdl.org>
10 *
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License.
14 *
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
19 *
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
23 */
24
25 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
26
27 #include <linux/crc32.h>
28 #include <linux/kernel.h>
29 #include <linux/module.h>
30 #include <linux/netdevice.h>
31 #include <linux/dma-mapping.h>
32 #include <linux/etherdevice.h>
33 #include <linux/ethtool.h>
34 #include <linux/pci.h>
35 #include <linux/interrupt.h>
36 #include <linux/ip.h>
37 #include <linux/slab.h>
38 #include <net/ip.h>
39 #include <linux/tcp.h>
40 #include <linux/in.h>
41 #include <linux/delay.h>
42 #include <linux/workqueue.h>
43 #include <linux/if_vlan.h>
44 #include <linux/prefetch.h>
45 #include <linux/debugfs.h>
46 #include <linux/mii.h>
47 #include <linux/of_device.h>
48 #include <linux/of_net.h>
49
50 #include <asm/irq.h>
51
52 #include "sky2.h"
53
54 #define DRV_NAME "sky2"
55 #define DRV_VERSION "1.30"
56
57 /*
58 * The Yukon II chipset takes 64 bit command blocks (called list elements)
59 * that are organized into three (receive, transmit, status) different rings
60 * similar to Tigon3.
61 */
62
63 #define RX_LE_SIZE 1024
64 #define RX_LE_BYTES (RX_LE_SIZE*sizeof(struct sky2_rx_le))
65 #define RX_MAX_PENDING (RX_LE_SIZE/6 - 2)
66 #define RX_DEF_PENDING RX_MAX_PENDING
67
68 /* This is the worst case number of transmit list elements for a single skb:
69 VLAN:GSO + CKSUM + Data + skb_frags * DMA */
70 #define MAX_SKB_TX_LE (2 + (sizeof(dma_addr_t)/sizeof(u32))*(MAX_SKB_FRAGS+1))
71 #define TX_MIN_PENDING (MAX_SKB_TX_LE+1)
72 #define TX_MAX_PENDING 1024
73 #define TX_DEF_PENDING 63
74
75 #define TX_WATCHDOG (5 * HZ)
76 #define NAPI_WEIGHT 64
77 #define PHY_RETRIES 1000
78
79 #define SKY2_EEPROM_MAGIC 0x9955aabb
80
81 #define RING_NEXT(x, s) (((x)+1) & ((s)-1))
82
83 static const u32 default_msg =
84 NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK
85 | NETIF_MSG_TIMER | NETIF_MSG_TX_ERR | NETIF_MSG_RX_ERR
86 | NETIF_MSG_IFUP | NETIF_MSG_IFDOWN;
87
88 static int debug = -1; /* defaults above */
89 module_param(debug, int, 0);
90 MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
91
92 static int copybreak __read_mostly = 128;
93 module_param(copybreak, int, 0);
94 MODULE_PARM_DESC(copybreak, "Receive copy threshold");
95
96 static int disable_msi = 0;
97 module_param(disable_msi, int, 0);
98 MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)");
99
100 static int legacy_pme = 0;
101 module_param(legacy_pme, int, 0);
102 MODULE_PARM_DESC(legacy_pme, "Legacy power management");
103
104 static const struct pci_device_id sky2_id_table[] = {
105 { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) }, /* SK-9Sxx */
106 { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) }, /* SK-9Exx */
107 { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E01) }, /* SK-9E21M */
108 { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b00) }, /* DGE-560T */
109 { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4001) }, /* DGE-550SX */
110 { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4B02) }, /* DGE-560SX */
111 { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4B03) }, /* DGE-550T */
112 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4340) }, /* 88E8021 */
113 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4341) }, /* 88E8022 */
114 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4342) }, /* 88E8061 */
115 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4343) }, /* 88E8062 */
116 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4344) }, /* 88E8021 */
117 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4345) }, /* 88E8022 */
118 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4346) }, /* 88E8061 */
119 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4347) }, /* 88E8062 */
120 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4350) }, /* 88E8035 */
121 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4351) }, /* 88E8036 */
122 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4352) }, /* 88E8038 */
123 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4353) }, /* 88E8039 */
124 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4354) }, /* 88E8040 */
125 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4355) }, /* 88E8040T */
126 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4356) }, /* 88EC033 */
127 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4357) }, /* 88E8042 */
128 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x435A) }, /* 88E8048 */
129 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4360) }, /* 88E8052 */
130 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4361) }, /* 88E8050 */
131 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4362) }, /* 88E8053 */
132 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4363) }, /* 88E8055 */
133 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4364) }, /* 88E8056 */
134 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4365) }, /* 88E8070 */
135 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4366) }, /* 88EC036 */
136 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4367) }, /* 88EC032 */
137 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4368) }, /* 88EC034 */
138 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4369) }, /* 88EC042 */
139 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436A) }, /* 88E8058 */
140 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436B) }, /* 88E8071 */
141 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436C) }, /* 88E8072 */
142 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436D) }, /* 88E8055 */
143 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4370) }, /* 88E8075 */
144 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4380) }, /* 88E8057 */
145 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4381) }, /* 88E8059 */
146 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4382) }, /* 88E8079 */
147 { 0 }
148 };
149
150 MODULE_DEVICE_TABLE(pci, sky2_id_table);
151
152 /* Avoid conditionals by using array */
153 static const unsigned txqaddr[] = { Q_XA1, Q_XA2 };
154 static const unsigned rxqaddr[] = { Q_R1, Q_R2 };
155 static const u32 portirq_msk[] = { Y2_IS_PORT_1, Y2_IS_PORT_2 };
156
157 static void sky2_set_multicast(struct net_device *dev);
158 static irqreturn_t sky2_intr(int irq, void *dev_id);
159
160 /* Access to PHY via serial interconnect */
161 static int gm_phy_write(struct sky2_hw *hw, unsigned port, u16 reg, u16 val)
162 {
163 int i;
164
165 gma_write16(hw, port, GM_SMI_DATA, val);
166 gma_write16(hw, port, GM_SMI_CTRL,
167 GM_SMI_CT_PHY_AD(PHY_ADDR_MARV) | GM_SMI_CT_REG_AD(reg));
168
169 for (i = 0; i < PHY_RETRIES; i++) {
170 u16 ctrl = gma_read16(hw, port, GM_SMI_CTRL);
171 if (ctrl == 0xffff)
172 goto io_error;
173
174 if (!(ctrl & GM_SMI_CT_BUSY))
175 return 0;
176
177 udelay(10);
178 }
179
180 dev_warn(&hw->pdev->dev, "%s: phy write timeout\n", hw->dev[port]->name);
181 return -ETIMEDOUT;
182
183 io_error:
184 dev_err(&hw->pdev->dev, "%s: phy I/O error\n", hw->dev[port]->name);
185 return -EIO;
186 }
187
188 static int __gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg, u16 *val)
189 {
190 int i;
191
192 gma_write16(hw, port, GM_SMI_CTRL, GM_SMI_CT_PHY_AD(PHY_ADDR_MARV)
193 | GM_SMI_CT_REG_AD(reg) | GM_SMI_CT_OP_RD);
194
195 for (i = 0; i < PHY_RETRIES; i++) {
196 u16 ctrl = gma_read16(hw, port, GM_SMI_CTRL);
197 if (ctrl == 0xffff)
198 goto io_error;
199
200 if (ctrl & GM_SMI_CT_RD_VAL) {
201 *val = gma_read16(hw, port, GM_SMI_DATA);
202 return 0;
203 }
204
205 udelay(10);
206 }
207
208 dev_warn(&hw->pdev->dev, "%s: phy read timeout\n", hw->dev[port]->name);
209 return -ETIMEDOUT;
210 io_error:
211 dev_err(&hw->pdev->dev, "%s: phy I/O error\n", hw->dev[port]->name);
212 return -EIO;
213 }
214
215 static inline u16 gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg)
216 {
217 u16 v;
218 __gm_phy_read(hw, port, reg, &v);
219 return v;
220 }
221
222
223 static void sky2_power_on(struct sky2_hw *hw)
224 {
225 /* switch power to VCC (WA for VAUX problem) */
226 sky2_write8(hw, B0_POWER_CTRL,
227 PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_OFF | PC_VCC_ON);
228
229 /* disable Core Clock Division, */
230 sky2_write32(hw, B2_Y2_CLK_CTRL, Y2_CLK_DIV_DIS);
231
232 if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > CHIP_REV_YU_XL_A1)
233 /* enable bits are inverted */
234 sky2_write8(hw, B2_Y2_CLK_GATE,
235 Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS |
236 Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS |
237 Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS);
238 else
239 sky2_write8(hw, B2_Y2_CLK_GATE, 0);
240
241 if (hw->flags & SKY2_HW_ADV_POWER_CTL) {
242 u32 reg;
243
244 sky2_pci_write32(hw, PCI_DEV_REG3, 0);
245
246 reg = sky2_pci_read32(hw, PCI_DEV_REG4);
247 /* set all bits to 0 except bits 15..12 and 8 */
248 reg &= P_ASPM_CONTROL_MSK;
249 sky2_pci_write32(hw, PCI_DEV_REG4, reg);
250
251 reg = sky2_pci_read32(hw, PCI_DEV_REG5);
252 /* set all bits to 0 except bits 28 & 27 */
253 reg &= P_CTL_TIM_VMAIN_AV_MSK;
254 sky2_pci_write32(hw, PCI_DEV_REG5, reg);
255
256 sky2_pci_write32(hw, PCI_CFG_REG_1, 0);
257
258 sky2_write16(hw, B0_CTST, Y2_HW_WOL_ON);
259
260 /* Enable workaround for dev 4.107 on Yukon-Ultra & Extreme */
261 reg = sky2_read32(hw, B2_GP_IO);
262 reg |= GLB_GPIO_STAT_RACE_DIS;
263 sky2_write32(hw, B2_GP_IO, reg);
264
265 sky2_read32(hw, B2_GP_IO);
266 }
267
268 /* Turn on "driver loaded" LED */
269 sky2_write16(hw, B0_CTST, Y2_LED_STAT_ON);
270 }
271
272 static void sky2_power_aux(struct sky2_hw *hw)
273 {
274 if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > CHIP_REV_YU_XL_A1)
275 sky2_write8(hw, B2_Y2_CLK_GATE, 0);
276 else
277 /* enable bits are inverted */
278 sky2_write8(hw, B2_Y2_CLK_GATE,
279 Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS |
280 Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS |
281 Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS);
282
283 /* switch power to VAUX if supported and PME from D3cold */
284 if ( (sky2_read32(hw, B0_CTST) & Y2_VAUX_AVAIL) &&
285 pci_pme_capable(hw->pdev, PCI_D3cold))
286 sky2_write8(hw, B0_POWER_CTRL,
287 (PC_VAUX_ENA | PC_VCC_ENA |
288 PC_VAUX_ON | PC_VCC_OFF));
289
290 /* turn off "driver loaded LED" */
291 sky2_write16(hw, B0_CTST, Y2_LED_STAT_OFF);
292 }
293
294 static void sky2_gmac_reset(struct sky2_hw *hw, unsigned port)
295 {
296 u16 reg;
297
298 /* disable all GMAC IRQ's */
299 sky2_write8(hw, SK_REG(port, GMAC_IRQ_MSK), 0);
300
301 gma_write16(hw, port, GM_MC_ADDR_H1, 0); /* clear MC hash */
302 gma_write16(hw, port, GM_MC_ADDR_H2, 0);
303 gma_write16(hw, port, GM_MC_ADDR_H3, 0);
304 gma_write16(hw, port, GM_MC_ADDR_H4, 0);
305
306 reg = gma_read16(hw, port, GM_RX_CTRL);
307 reg |= GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA;
308 gma_write16(hw, port, GM_RX_CTRL, reg);
309 }
310
311 /* flow control to advertise bits */
312 static const u16 copper_fc_adv[] = {
313 [FC_NONE] = 0,
314 [FC_TX] = PHY_M_AN_ASP,
315 [FC_RX] = PHY_M_AN_PC,
316 [FC_BOTH] = PHY_M_AN_PC | PHY_M_AN_ASP,
317 };
318
319 /* flow control to advertise bits when using 1000BaseX */
320 static const u16 fiber_fc_adv[] = {
321 [FC_NONE] = PHY_M_P_NO_PAUSE_X,
322 [FC_TX] = PHY_M_P_ASYM_MD_X,
323 [FC_RX] = PHY_M_P_SYM_MD_X,
324 [FC_BOTH] = PHY_M_P_BOTH_MD_X,
325 };
326
327 /* flow control to GMA disable bits */
328 static const u16 gm_fc_disable[] = {
329 [FC_NONE] = GM_GPCR_FC_RX_DIS | GM_GPCR_FC_TX_DIS,
330 [FC_TX] = GM_GPCR_FC_RX_DIS,
331 [FC_RX] = GM_GPCR_FC_TX_DIS,
332 [FC_BOTH] = 0,
333 };
334
335
336 static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
337 {
338 struct sky2_port *sky2 = netdev_priv(hw->dev[port]);
339 u16 ctrl, ct1000, adv, pg, ledctrl, ledover, reg;
340
341 if ( (sky2->flags & SKY2_FLAG_AUTO_SPEED) &&
342 !(hw->flags & SKY2_HW_NEWER_PHY)) {
343 u16 ectrl = gm_phy_read(hw, port, PHY_MARV_EXT_CTRL);
344
345 ectrl &= ~(PHY_M_EC_M_DSC_MSK | PHY_M_EC_S_DSC_MSK |
346 PHY_M_EC_MAC_S_MSK);
347 ectrl |= PHY_M_EC_MAC_S(MAC_TX_CLK_25_MHZ);
348
349 /* on PHY 88E1040 Rev.D0 (and newer) downshift control changed */
350 if (hw->chip_id == CHIP_ID_YUKON_EC)
351 /* set downshift counter to 3x and enable downshift */
352 ectrl |= PHY_M_EC_DSC_2(2) | PHY_M_EC_DOWN_S_ENA;
353 else
354 /* set master & slave downshift counter to 1x */
355 ectrl |= PHY_M_EC_M_DSC(0) | PHY_M_EC_S_DSC(1);
356
357 gm_phy_write(hw, port, PHY_MARV_EXT_CTRL, ectrl);
358 }
359
360 ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
361 if (sky2_is_copper(hw)) {
362 if (!(hw->flags & SKY2_HW_GIGABIT)) {
363 /* enable automatic crossover */
364 ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO) >> 1;
365
366 if (hw->chip_id == CHIP_ID_YUKON_FE_P &&
367 hw->chip_rev == CHIP_REV_YU_FE2_A0) {
368 u16 spec;
369
370 /* Enable Class A driver for FE+ A0 */
371 spec = gm_phy_read(hw, port, PHY_MARV_FE_SPEC_2);
372 spec |= PHY_M_FESC_SEL_CL_A;
373 gm_phy_write(hw, port, PHY_MARV_FE_SPEC_2, spec);
374 }
375 } else {
376 /* disable energy detect */
377 ctrl &= ~PHY_M_PC_EN_DET_MSK;
378
379 /* enable automatic crossover */
380 ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO);
381
382 /* downshift on PHY 88E1112 and 88E1149 is changed */
383 if ( (sky2->flags & SKY2_FLAG_AUTO_SPEED) &&
384 (hw->flags & SKY2_HW_NEWER_PHY)) {
385 /* set downshift counter to 3x and enable downshift */
386 ctrl &= ~PHY_M_PC_DSC_MSK;
387 ctrl |= PHY_M_PC_DSC(2) | PHY_M_PC_DOWN_S_ENA;
388 }
389 }
390 } else {
391 /* workaround for deviation #4.88 (CRC errors) */
392 /* disable Automatic Crossover */
393
394 ctrl &= ~PHY_M_PC_MDIX_MSK;
395 }
396
397 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
398
399 /* special setup for PHY 88E1112 Fiber */
400 if (hw->chip_id == CHIP_ID_YUKON_XL && (hw->flags & SKY2_HW_FIBRE_PHY)) {
401 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
402
403 /* Fiber: select 1000BASE-X only mode MAC Specific Ctrl Reg. */
404 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 2);
405 ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
406 ctrl &= ~PHY_M_MAC_MD_MSK;
407 ctrl |= PHY_M_MAC_MODE_SEL(PHY_M_MAC_MD_1000BX);
408 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
409
410 if (hw->pmd_type == 'P') {
411 /* select page 1 to access Fiber registers */
412 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 1);
413
414 /* for SFP-module set SIGDET polarity to low */
415 ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
416 ctrl |= PHY_M_FIB_SIGD_POL;
417 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
418 }
419
420 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
421 }
422
423 ctrl = PHY_CT_RESET;
424 ct1000 = 0;
425 adv = PHY_AN_CSMA;
426 reg = 0;
427
428 if (sky2->flags & SKY2_FLAG_AUTO_SPEED) {
429 if (sky2_is_copper(hw)) {
430 if (sky2->advertising & ADVERTISED_1000baseT_Full)
431 ct1000 |= PHY_M_1000C_AFD;
432 if (sky2->advertising & ADVERTISED_1000baseT_Half)
433 ct1000 |= PHY_M_1000C_AHD;
434 if (sky2->advertising & ADVERTISED_100baseT_Full)
435 adv |= PHY_M_AN_100_FD;
436 if (sky2->advertising & ADVERTISED_100baseT_Half)
437 adv |= PHY_M_AN_100_HD;
438 if (sky2->advertising & ADVERTISED_10baseT_Full)
439 adv |= PHY_M_AN_10_FD;
440 if (sky2->advertising & ADVERTISED_10baseT_Half)
441 adv |= PHY_M_AN_10_HD;
442
443 } else { /* special defines for FIBER (88E1040S only) */
444 if (sky2->advertising & ADVERTISED_1000baseT_Full)
445 adv |= PHY_M_AN_1000X_AFD;
446 if (sky2->advertising & ADVERTISED_1000baseT_Half)
447 adv |= PHY_M_AN_1000X_AHD;
448 }
449
450 /* Restart Auto-negotiation */
451 ctrl |= PHY_CT_ANE | PHY_CT_RE_CFG;
452 } else {
453 /* forced speed/duplex settings */
454 ct1000 = PHY_M_1000C_MSE;
455
456 /* Disable auto update for duplex flow control and duplex */
457 reg |= GM_GPCR_AU_DUP_DIS | GM_GPCR_AU_SPD_DIS;
458
459 switch (sky2->speed) {
460 case SPEED_1000:
461 ctrl |= PHY_CT_SP1000;
462 reg |= GM_GPCR_SPEED_1000;
463 break;
464 case SPEED_100:
465 ctrl |= PHY_CT_SP100;
466 reg |= GM_GPCR_SPEED_100;
467 break;
468 }
469
470 if (sky2->duplex == DUPLEX_FULL) {
471 reg |= GM_GPCR_DUP_FULL;
472 ctrl |= PHY_CT_DUP_MD;
473 } else if (sky2->speed < SPEED_1000)
474 sky2->flow_mode = FC_NONE;
475 }
476
477 if (sky2->flags & SKY2_FLAG_AUTO_PAUSE) {
478 if (sky2_is_copper(hw))
479 adv |= copper_fc_adv[sky2->flow_mode];
480 else
481 adv |= fiber_fc_adv[sky2->flow_mode];
482 } else {
483 reg |= GM_GPCR_AU_FCT_DIS;
484 reg |= gm_fc_disable[sky2->flow_mode];
485
486 /* Forward pause packets to GMAC? */
487 if (sky2->flow_mode & FC_RX)
488 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_ON);
489 else
490 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);
491 }
492
493 gma_write16(hw, port, GM_GP_CTRL, reg);
494
495 if (hw->flags & SKY2_HW_GIGABIT)
496 gm_phy_write(hw, port, PHY_MARV_1000T_CTRL, ct1000);
497
498 gm_phy_write(hw, port, PHY_MARV_AUNE_ADV, adv);
499 gm_phy_write(hw, port, PHY_MARV_CTRL, ctrl);
500
501 /* Setup Phy LED's */
502 ledctrl = PHY_M_LED_PULS_DUR(PULS_170MS);
503 ledover = 0;
504
505 switch (hw->chip_id) {
506 case CHIP_ID_YUKON_FE:
507 /* on 88E3082 these bits are at 11..9 (shifted left) */
508 ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) << 1;
509
510 ctrl = gm_phy_read(hw, port, PHY_MARV_FE_LED_PAR);
511
512 /* delete ACT LED control bits */
513 ctrl &= ~PHY_M_FELP_LED1_MSK;
514 /* change ACT LED control to blink mode */
515 ctrl |= PHY_M_FELP_LED1_CTRL(LED_PAR_CTRL_ACT_BL);
516 gm_phy_write(hw, port, PHY_MARV_FE_LED_PAR, ctrl);
517 break;
518
519 case CHIP_ID_YUKON_FE_P:
520 /* Enable Link Partner Next Page */
521 ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
522 ctrl |= PHY_M_PC_ENA_LIP_NP;
523
524 /* disable Energy Detect and enable scrambler */
525 ctrl &= ~(PHY_M_PC_ENA_ENE_DT | PHY_M_PC_DIS_SCRAMB);
526 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
527
528 /* set LED2 -> ACT, LED1 -> LINK, LED0 -> SPEED */
529 ctrl = PHY_M_FELP_LED2_CTRL(LED_PAR_CTRL_ACT_BL) |
530 PHY_M_FELP_LED1_CTRL(LED_PAR_CTRL_LINK) |
531 PHY_M_FELP_LED0_CTRL(LED_PAR_CTRL_SPEED);
532
533 gm_phy_write(hw, port, PHY_MARV_FE_LED_PAR, ctrl);
534 break;
535
536 case CHIP_ID_YUKON_XL:
537 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
538
539 /* select page 3 to access LED control register */
540 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
541
542 /* set LED Function Control register */
543 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
544 (PHY_M_LEDC_LOS_CTRL(1) | /* LINK/ACT */
545 PHY_M_LEDC_INIT_CTRL(7) | /* 10 Mbps */
546 PHY_M_LEDC_STA1_CTRL(7) | /* 100 Mbps */
547 PHY_M_LEDC_STA0_CTRL(7))); /* 1000 Mbps */
548
549 /* set Polarity Control register */
550 gm_phy_write(hw, port, PHY_MARV_PHY_STAT,
551 (PHY_M_POLC_LS1_P_MIX(4) |
552 PHY_M_POLC_IS0_P_MIX(4) |
553 PHY_M_POLC_LOS_CTRL(2) |
554 PHY_M_POLC_INIT_CTRL(2) |
555 PHY_M_POLC_STA1_CTRL(2) |
556 PHY_M_POLC_STA0_CTRL(2)));
557
558 /* restore page register */
559 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
560 break;
561
562 case CHIP_ID_YUKON_EC_U:
563 case CHIP_ID_YUKON_EX:
564 case CHIP_ID_YUKON_SUPR:
565 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
566
567 /* select page 3 to access LED control register */
568 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
569
570 /* set LED Function Control register */
571 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
572 (PHY_M_LEDC_LOS_CTRL(1) | /* LINK/ACT */
573 PHY_M_LEDC_INIT_CTRL(8) | /* 10 Mbps */
574 PHY_M_LEDC_STA1_CTRL(7) | /* 100 Mbps */
575 PHY_M_LEDC_STA0_CTRL(7)));/* 1000 Mbps */
576
577 /* set Blink Rate in LED Timer Control Register */
578 gm_phy_write(hw, port, PHY_MARV_INT_MASK,
579 ledctrl | PHY_M_LED_BLINK_RT(BLINK_84MS));
580 /* restore page register */
581 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
582 break;
583
584 default:
585 /* set Tx LED (LED_TX) to blink mode on Rx OR Tx activity */
586 ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) | PHY_M_LEDC_TX_CTRL;
587
588 /* turn off the Rx LED (LED_RX) */
589 ledover |= PHY_M_LED_MO_RX(MO_LED_OFF);
590 }
591
592 if (hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_UL_2) {
593 /* apply fixes in PHY AFE */
594 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 255);
595
596 /* increase differential signal amplitude in 10BASE-T */
597 gm_phy_write(hw, port, 0x18, 0xaa99);
598 gm_phy_write(hw, port, 0x17, 0x2011);
599
600 if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
601 /* fix for IEEE A/B Symmetry failure in 1000BASE-T */
602 gm_phy_write(hw, port, 0x18, 0xa204);
603 gm_phy_write(hw, port, 0x17, 0x2002);
604 }
605
606 /* set page register to 0 */
607 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
608 } else if (hw->chip_id == CHIP_ID_YUKON_FE_P &&
609 hw->chip_rev == CHIP_REV_YU_FE2_A0) {
610 /* apply workaround for integrated resistors calibration */
611 gm_phy_write(hw, port, PHY_MARV_PAGE_ADDR, 17);
612 gm_phy_write(hw, port, PHY_MARV_PAGE_DATA, 0x3f60);
613 } else if (hw->chip_id == CHIP_ID_YUKON_OPT && hw->chip_rev == 0) {
614 /* apply fixes in PHY AFE */
615 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0x00ff);
616
617 /* apply RDAC termination workaround */
618 gm_phy_write(hw, port, 24, 0x2800);
619 gm_phy_write(hw, port, 23, 0x2001);
620
621 /* set page register back to 0 */
622 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
623 } else if (hw->chip_id != CHIP_ID_YUKON_EX &&
624 hw->chip_id < CHIP_ID_YUKON_SUPR) {
625 /* no effect on Yukon-XL */
626 gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
627
628 if (!(sky2->flags & SKY2_FLAG_AUTO_SPEED) ||
629 sky2->speed == SPEED_100) {
630 /* turn on 100 Mbps LED (LED_LINK100) */
631 ledover |= PHY_M_LED_MO_100(MO_LED_ON);
632 }
633
634 if (ledover)
635 gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover);
636
637 } else if (hw->chip_id == CHIP_ID_YUKON_PRM &&
638 (sky2_read8(hw, B2_MAC_CFG) & 0xf) == 0x7) {
639 int i;
640 /* This a phy register setup workaround copied from vendor driver. */
641 static const struct {
642 u16 reg, val;
643 } eee_afe[] = {
644 { 0x156, 0x58ce },
645 { 0x153, 0x99eb },
646 { 0x141, 0x8064 },
647 /* { 0x155, 0x130b },*/
648 { 0x000, 0x0000 },
649 { 0x151, 0x8433 },
650 { 0x14b, 0x8c44 },
651 { 0x14c, 0x0f90 },
652 { 0x14f, 0x39aa },
653 /* { 0x154, 0x2f39 },*/
654 { 0x14d, 0xba33 },
655 { 0x144, 0x0048 },
656 { 0x152, 0x2010 },
657 /* { 0x158, 0x1223 },*/
658 { 0x140, 0x4444 },
659 { 0x154, 0x2f3b },
660 { 0x158, 0xb203 },
661 { 0x157, 0x2029 },
662 };
663
664 /* Start Workaround for OptimaEEE Rev.Z0 */
665 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0x00fb);
666
667 gm_phy_write(hw, port, 1, 0x4099);
668 gm_phy_write(hw, port, 3, 0x1120);
669 gm_phy_write(hw, port, 11, 0x113c);
670 gm_phy_write(hw, port, 14, 0x8100);
671 gm_phy_write(hw, port, 15, 0x112a);
672 gm_phy_write(hw, port, 17, 0x1008);
673
674 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0x00fc);
675 gm_phy_write(hw, port, 1, 0x20b0);
676
677 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0x00ff);
678
679 for (i = 0; i < ARRAY_SIZE(eee_afe); i++) {
680 /* apply AFE settings */
681 gm_phy_write(hw, port, 17, eee_afe[i].val);
682 gm_phy_write(hw, port, 16, eee_afe[i].reg | 1u<<13);
683 }
684
685 /* End Workaround for OptimaEEE */
686 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
687
688 /* Enable 10Base-Te (EEE) */
689 if (hw->chip_id >= CHIP_ID_YUKON_PRM) {
690 reg = gm_phy_read(hw, port, PHY_MARV_EXT_CTRL);
691 gm_phy_write(hw, port, PHY_MARV_EXT_CTRL,
692 reg | PHY_M_10B_TE_ENABLE);
693 }
694 }
695
696 /* Enable phy interrupt on auto-negotiation complete (or link up) */
697 if (sky2->flags & SKY2_FLAG_AUTO_SPEED)
698 gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_AN_COMPL);
699 else
700 gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);
701 }
702
703 static const u32 phy_power[] = { PCI_Y2_PHY1_POWD, PCI_Y2_PHY2_POWD };
704 static const u32 coma_mode[] = { PCI_Y2_PHY1_COMA, PCI_Y2_PHY2_COMA };
705
706 static void sky2_phy_power_up(struct sky2_hw *hw, unsigned port)
707 {
708 u32 reg1;
709
710 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
711 reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
712 reg1 &= ~phy_power[port];
713
714 if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > CHIP_REV_YU_XL_A1)
715 reg1 |= coma_mode[port];
716
717 sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
718 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
719 sky2_pci_read32(hw, PCI_DEV_REG1);
720
721 if (hw->chip_id == CHIP_ID_YUKON_FE)
722 gm_phy_write(hw, port, PHY_MARV_CTRL, PHY_CT_ANE);
723 else if (hw->flags & SKY2_HW_ADV_POWER_CTL)
724 sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR);
725 }
726
727 static void sky2_phy_power_down(struct sky2_hw *hw, unsigned port)
728 {
729 u32 reg1;
730 u16 ctrl;
731
732 /* release GPHY Control reset */
733 sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR);
734
735 /* release GMAC reset */
736 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR);
737
738 if (hw->flags & SKY2_HW_NEWER_PHY) {
739 /* select page 2 to access MAC control register */
740 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 2);
741
742 ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
743 /* allow GMII Power Down */
744 ctrl &= ~PHY_M_MAC_GMIF_PUP;
745 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
746
747 /* set page register back to 0 */
748 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
749 }
750
751 /* setup General Purpose Control Register */
752 gma_write16(hw, port, GM_GP_CTRL,
753 GM_GPCR_FL_PASS | GM_GPCR_SPEED_100 |
754 GM_GPCR_AU_DUP_DIS | GM_GPCR_AU_FCT_DIS |
755 GM_GPCR_AU_SPD_DIS);
756
757 if (hw->chip_id != CHIP_ID_YUKON_EC) {
758 if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
759 /* select page 2 to access MAC control register */
760 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 2);
761
762 ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
763 /* enable Power Down */
764 ctrl |= PHY_M_PC_POW_D_ENA;
765 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
766
767 /* set page register back to 0 */
768 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
769 }
770
771 /* set IEEE compatible Power Down Mode (dev. #4.99) */
772 gm_phy_write(hw, port, PHY_MARV_CTRL, PHY_CT_PDOWN);
773 }
774
775 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
776 reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
777 reg1 |= phy_power[port]; /* set PHY to PowerDown/COMA Mode */
778 sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
779 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
780 }
781
782 /* configure IPG according to used link speed */
783 static void sky2_set_ipg(struct sky2_port *sky2)
784 {
785 u16 reg;
786
787 reg = gma_read16(sky2->hw, sky2->port, GM_SERIAL_MODE);
788 reg &= ~GM_SMOD_IPG_MSK;
789 if (sky2->speed > SPEED_100)
790 reg |= IPG_DATA_VAL(IPG_DATA_DEF_1000);
791 else
792 reg |= IPG_DATA_VAL(IPG_DATA_DEF_10_100);
793 gma_write16(sky2->hw, sky2->port, GM_SERIAL_MODE, reg);
794 }
795
796 /* Enable Rx/Tx */
797 static void sky2_enable_rx_tx(struct sky2_port *sky2)
798 {
799 struct sky2_hw *hw = sky2->hw;
800 unsigned port = sky2->port;
801 u16 reg;
802
803 reg = gma_read16(hw, port, GM_GP_CTRL);
804 reg |= GM_GPCR_RX_ENA | GM_GPCR_TX_ENA;
805 gma_write16(hw, port, GM_GP_CTRL, reg);
806 }
807
808 /* Force a renegotiation */
809 static void sky2_phy_reinit(struct sky2_port *sky2)
810 {
811 spin_lock_bh(&sky2->phy_lock);
812 sky2_phy_init(sky2->hw, sky2->port);
813 sky2_enable_rx_tx(sky2);
814 spin_unlock_bh(&sky2->phy_lock);
815 }
816
817 /* Put device in state to listen for Wake On Lan */
818 static void sky2_wol_init(struct sky2_port *sky2)
819 {
820 struct sky2_hw *hw = sky2->hw;
821 unsigned port = sky2->port;
822 enum flow_control save_mode;
823 u16 ctrl;
824
825 /* Bring hardware out of reset */
826 sky2_write16(hw, B0_CTST, CS_RST_CLR);
827 sky2_write16(hw, SK_REG(port, GMAC_LINK_CTRL), GMLC_RST_CLR);
828
829 sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR);
830 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR);
831
832 /* Force to 10/100
833 * sky2_reset will re-enable on resume
834 */
835 save_mode = sky2->flow_mode;
836 ctrl = sky2->advertising;
837
838 sky2->advertising &= ~(ADVERTISED_1000baseT_Half|ADVERTISED_1000baseT_Full);
839 sky2->flow_mode = FC_NONE;
840
841 spin_lock_bh(&sky2->phy_lock);
842 sky2_phy_power_up(hw, port);
843 sky2_phy_init(hw, port);
844 spin_unlock_bh(&sky2->phy_lock);
845
846 sky2->flow_mode = save_mode;
847 sky2->advertising = ctrl;
848
849 /* Set GMAC to no flow control and auto update for speed/duplex */
850 gma_write16(hw, port, GM_GP_CTRL,
851 GM_GPCR_FC_TX_DIS|GM_GPCR_TX_ENA|GM_GPCR_RX_ENA|
852 GM_GPCR_DUP_FULL|GM_GPCR_FC_RX_DIS|GM_GPCR_AU_FCT_DIS);
853
854 /* Set WOL address */
855 memcpy_toio(hw->regs + WOL_REGS(port, WOL_MAC_ADDR),
856 sky2->netdev->dev_addr, ETH_ALEN);
857
858 /* Turn on appropriate WOL control bits */
859 sky2_write16(hw, WOL_REGS(port, WOL_CTRL_STAT), WOL_CTL_CLEAR_RESULT);
860 ctrl = 0;
861 if (sky2->wol & WAKE_PHY)
862 ctrl |= WOL_CTL_ENA_PME_ON_LINK_CHG|WOL_CTL_ENA_LINK_CHG_UNIT;
863 else
864 ctrl |= WOL_CTL_DIS_PME_ON_LINK_CHG|WOL_CTL_DIS_LINK_CHG_UNIT;
865
866 if (sky2->wol & WAKE_MAGIC)
867 ctrl |= WOL_CTL_ENA_PME_ON_MAGIC_PKT|WOL_CTL_ENA_MAGIC_PKT_UNIT;
868 else
869 ctrl |= WOL_CTL_DIS_PME_ON_MAGIC_PKT|WOL_CTL_DIS_MAGIC_PKT_UNIT;
870
871 ctrl |= WOL_CTL_DIS_PME_ON_PATTERN|WOL_CTL_DIS_PATTERN_UNIT;
872 sky2_write16(hw, WOL_REGS(port, WOL_CTRL_STAT), ctrl);
873
874 /* Disable PiG firmware */
875 sky2_write16(hw, B0_CTST, Y2_HW_WOL_OFF);
876
877 /* Needed by some broken BIOSes, use PCI rather than PCI-e for WOL */
878 if (legacy_pme) {
879 u32 reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
880 reg1 |= PCI_Y2_PME_LEGACY;
881 sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
882 }
883
884 /* block receiver */
885 sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
886 sky2_read32(hw, B0_CTST);
887 }
888
889 static void sky2_set_tx_stfwd(struct sky2_hw *hw, unsigned port)
890 {
891 struct net_device *dev = hw->dev[port];
892
893 if ( (hw->chip_id == CHIP_ID_YUKON_EX &&
894 hw->chip_rev != CHIP_REV_YU_EX_A0) ||
895 hw->chip_id >= CHIP_ID_YUKON_FE_P) {
896 /* Yukon-Extreme B0 and further Extreme devices */
897 sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_STFW_ENA);
898 } else if (dev->mtu > ETH_DATA_LEN) {
899 /* set Tx GMAC FIFO Almost Empty Threshold */
900 sky2_write32(hw, SK_REG(port, TX_GMF_AE_THR),
901 (ECU_JUMBO_WM << 16) | ECU_AE_THR);
902
903 sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_STFW_DIS);
904 } else
905 sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_STFW_ENA);
906 }
907
908 static void sky2_mac_init(struct sky2_hw *hw, unsigned port)
909 {
910 struct sky2_port *sky2 = netdev_priv(hw->dev[port]);
911 u16 reg;
912 u32 rx_reg;
913 int i;
914 const u8 *addr = hw->dev[port]->dev_addr;
915
916 sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET);
917 sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR);
918
919 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR);
920
921 if (hw->chip_id == CHIP_ID_YUKON_XL &&
922 hw->chip_rev == CHIP_REV_YU_XL_A0 &&
923 port == 1) {
924 /* WA DEV_472 -- looks like crossed wires on port 2 */
925 /* clear GMAC 1 Control reset */
926 sky2_write8(hw, SK_REG(0, GMAC_CTRL), GMC_RST_CLR);
927 do {
928 sky2_write8(hw, SK_REG(1, GMAC_CTRL), GMC_RST_SET);
929 sky2_write8(hw, SK_REG(1, GMAC_CTRL), GMC_RST_CLR);
930 } while (gm_phy_read(hw, 1, PHY_MARV_ID0) != PHY_MARV_ID0_VAL ||
931 gm_phy_read(hw, 1, PHY_MARV_ID1) != PHY_MARV_ID1_Y2 ||
932 gm_phy_read(hw, 1, PHY_MARV_INT_MASK) != 0);
933 }
934
935 sky2_read16(hw, SK_REG(port, GMAC_IRQ_SRC));
936
937 /* Enable Transmit FIFO Underrun */
938 sky2_write8(hw, SK_REG(port, GMAC_IRQ_MSK), GMAC_DEF_MSK);
939
940 spin_lock_bh(&sky2->phy_lock);
941 sky2_phy_power_up(hw, port);
942 sky2_phy_init(hw, port);
943 spin_unlock_bh(&sky2->phy_lock);
944
945 /* MIB clear */
946 reg = gma_read16(hw, port, GM_PHY_ADDR);
947 gma_write16(hw, port, GM_PHY_ADDR, reg | GM_PAR_MIB_CLR);
948
949 for (i = GM_MIB_CNT_BASE; i <= GM_MIB_CNT_END; i += 4)
950 gma_read16(hw, port, i);
951 gma_write16(hw, port, GM_PHY_ADDR, reg);
952
953 /* transmit control */
954 gma_write16(hw, port, GM_TX_CTRL, TX_COL_THR(TX_COL_DEF));
955
956 /* receive control reg: unicast + multicast + no FCS */
957 gma_write16(hw, port, GM_RX_CTRL,
958 GM_RXCR_UCF_ENA | GM_RXCR_CRC_DIS | GM_RXCR_MCF_ENA);
959
960 /* transmit flow control */
961 gma_write16(hw, port, GM_TX_FLOW_CTRL, 0xffff);
962
963 /* transmit parameter */
964 gma_write16(hw, port, GM_TX_PARAM,
965 TX_JAM_LEN_VAL(TX_JAM_LEN_DEF) |
966 TX_JAM_IPG_VAL(TX_JAM_IPG_DEF) |
967 TX_IPG_JAM_DATA(TX_IPG_JAM_DEF) |
968 TX_BACK_OFF_LIM(TX_BOF_LIM_DEF));
969
970 /* serial mode register */
971 reg = DATA_BLIND_VAL(DATA_BLIND_DEF) |
972 GM_SMOD_VLAN_ENA | IPG_DATA_VAL(IPG_DATA_DEF_1000);
973
974 if (hw->dev[port]->mtu > ETH_DATA_LEN)
975 reg |= GM_SMOD_JUMBO_ENA;
976
977 if (hw->chip_id == CHIP_ID_YUKON_EC_U &&
978 hw->chip_rev == CHIP_REV_YU_EC_U_B1)
979 reg |= GM_NEW_FLOW_CTRL;
980
981 gma_write16(hw, port, GM_SERIAL_MODE, reg);
982
983 /* virtual address for data */
984 gma_set_addr(hw, port, GM_SRC_ADDR_2L, addr);
985
986 /* physical address: used for pause frames */
987 gma_set_addr(hw, port, GM_SRC_ADDR_1L, addr);
988
989 /* ignore counter overflows */
990 gma_write16(hw, port, GM_TX_IRQ_MSK, 0);
991 gma_write16(hw, port, GM_RX_IRQ_MSK, 0);
992 gma_write16(hw, port, GM_TR_IRQ_MSK, 0);
993
994 /* Configure Rx MAC FIFO */
995 sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_CLR);
996 rx_reg = GMF_OPER_ON | GMF_RX_F_FL_ON;
997 if (hw->chip_id == CHIP_ID_YUKON_EX ||
998 hw->chip_id == CHIP_ID_YUKON_FE_P)
999 rx_reg |= GMF_RX_OVER_ON;
1000
1001 sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T), rx_reg);
1002
1003 if (hw->chip_id == CHIP_ID_YUKON_XL) {
1004 /* Hardware errata - clear flush mask */
1005 sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), 0);
1006 } else {
1007 /* Flush Rx MAC FIFO on any flow control or error */
1008 sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), GMR_FS_ANY_ERR);
1009 }
1010
1011 /* Set threshold to 0xa (64 bytes) + 1 to workaround pause bug */
1012 reg = RX_GMF_FL_THR_DEF + 1;
1013 /* Another magic mystery workaround from sk98lin */
1014 if (hw->chip_id == CHIP_ID_YUKON_FE_P &&
1015 hw->chip_rev == CHIP_REV_YU_FE2_A0)
1016 reg = 0x178;
1017 sky2_write16(hw, SK_REG(port, RX_GMF_FL_THR), reg);
1018
1019 /* Configure Tx MAC FIFO */
1020 sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_CLR);
1021 sky2_write16(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_OPER_ON);
1022
1023 /* On chips without ram buffer, pause is controlled by MAC level */
1024 if (!(hw->flags & SKY2_HW_RAM_BUFFER)) {
1025 /* Pause threshold is scaled by 8 in bytes */
1026 if (hw->chip_id == CHIP_ID_YUKON_FE_P &&
1027 hw->chip_rev == CHIP_REV_YU_FE2_A0)
1028 reg = 1568 / 8;
1029 else
1030 reg = 1024 / 8;
1031 sky2_write16(hw, SK_REG(port, RX_GMF_UP_THR), reg);
1032 sky2_write16(hw, SK_REG(port, RX_GMF_LP_THR), 768 / 8);
1033
1034 sky2_set_tx_stfwd(hw, port);
1035 }
1036
1037 if (hw->chip_id == CHIP_ID_YUKON_FE_P &&
1038 hw->chip_rev == CHIP_REV_YU_FE2_A0) {
1039 /* disable dynamic watermark */
1040 reg = sky2_read16(hw, SK_REG(port, TX_GMF_EA));
1041 reg &= ~TX_DYN_WM_ENA;
1042 sky2_write16(hw, SK_REG(port, TX_GMF_EA), reg);
1043 }
1044 }
1045
1046 /* Assign Ram Buffer allocation to queue */
1047 static void sky2_ramset(struct sky2_hw *hw, u16 q, u32 start, u32 space)
1048 {
1049 u32 end;
1050
1051 /* convert from K bytes to qwords used for hw register */
1052 start *= 1024/8;
1053 space *= 1024/8;
1054 end = start + space - 1;
1055
1056 sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_RST_CLR);
1057 sky2_write32(hw, RB_ADDR(q, RB_START), start);
1058 sky2_write32(hw, RB_ADDR(q, RB_END), end);
1059 sky2_write32(hw, RB_ADDR(q, RB_WP), start);
1060 sky2_write32(hw, RB_ADDR(q, RB_RP), start);
1061
1062 if (q == Q_R1 || q == Q_R2) {
1063 u32 tp = space - space/4;
1064
1065 /* On receive queue's set the thresholds
1066 * give receiver priority when > 3/4 full
1067 * send pause when down to 2K
1068 */
1069 sky2_write32(hw, RB_ADDR(q, RB_RX_UTHP), tp);
1070 sky2_write32(hw, RB_ADDR(q, RB_RX_LTHP), space/2);
1071
1072 tp = space - 8192/8;
1073 sky2_write32(hw, RB_ADDR(q, RB_RX_UTPP), tp);
1074 sky2_write32(hw, RB_ADDR(q, RB_RX_LTPP), space/4);
1075 } else {
1076 /* Enable store & forward on Tx queue's because
1077 * Tx FIFO is only 1K on Yukon
1078 */
1079 sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_ENA_STFWD);
1080 }
1081
1082 sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_ENA_OP_MD);
1083 sky2_read8(hw, RB_ADDR(q, RB_CTRL));
1084 }
1085
1086 /* Setup Bus Memory Interface */
1087 static void sky2_qset(struct sky2_hw *hw, u16 q)
1088 {
1089 sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_CLR_RESET);
1090 sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_OPER_INIT);
1091 sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_FIFO_OP_ON);
1092 sky2_write32(hw, Q_ADDR(q, Q_WM), BMU_WM_DEFAULT);
1093 }
1094
1095 /* Setup prefetch unit registers. This is the interface between
1096 * hardware and driver list elements
1097 */
1098 static void sky2_prefetch_init(struct sky2_hw *hw, u32 qaddr,
1099 dma_addr_t addr, u32 last)
1100 {
1101 sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_RST_SET);
1102 sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_RST_CLR);
1103 sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_ADDR_HI), upper_32_bits(addr));
1104 sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_ADDR_LO), lower_32_bits(addr));
1105 sky2_write16(hw, Y2_QADDR(qaddr, PREF_UNIT_LAST_IDX), last);
1106 sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_OP_ON);
1107
1108 sky2_read32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL));
1109 }
1110
1111 static inline struct sky2_tx_le *get_tx_le(struct sky2_port *sky2, u16 *slot)
1112 {
1113 struct sky2_tx_le *le = sky2->tx_le + *slot;
1114
1115 *slot = RING_NEXT(*slot, sky2->tx_ring_size);
1116 le->ctrl = 0;
1117 return le;
1118 }
1119
1120 static void tx_init(struct sky2_port *sky2)
1121 {
1122 struct sky2_tx_le *le;
1123
1124 sky2->tx_prod = sky2->tx_cons = 0;
1125 sky2->tx_tcpsum = 0;
1126 sky2->tx_last_mss = 0;
1127 netdev_reset_queue(sky2->netdev);
1128
1129 le = get_tx_le(sky2, &sky2->tx_prod);
1130 le->addr = 0;
1131 le->opcode = OP_ADDR64 | HW_OWNER;
1132 sky2->tx_last_upper = 0;
1133 }
1134
1135 /* Update chip's next pointer */
1136 static inline void sky2_put_idx(struct sky2_hw *hw, unsigned q, u16 idx)
1137 {
1138 /* Make sure write' to descriptors are complete before we tell hardware */
1139 wmb();
1140 sky2_write16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX), idx);
1141
1142 /* Synchronize I/O on since next processor may write to tail */
1143 mmiowb();
1144 }
1145
1146
1147 static inline struct sky2_rx_le *sky2_next_rx(struct sky2_port *sky2)
1148 {
1149 struct sky2_rx_le *le = sky2->rx_le + sky2->rx_put;
1150 sky2->rx_put = RING_NEXT(sky2->rx_put, RX_LE_SIZE);
1151 le->ctrl = 0;
1152 return le;
1153 }
1154
1155 static unsigned sky2_get_rx_threshold(struct sky2_port *sky2)
1156 {
1157 unsigned size;
1158
1159 /* Space needed for frame data + headers rounded up */
1160 size = roundup(sky2->netdev->mtu + ETH_HLEN + VLAN_HLEN, 8);
1161
1162 /* Stopping point for hardware truncation */
1163 return (size - 8) / sizeof(u32);
1164 }
1165
1166 static unsigned sky2_get_rx_data_size(struct sky2_port *sky2)
1167 {
1168 struct rx_ring_info *re;
1169 unsigned size;
1170
1171 /* Space needed for frame data + headers rounded up */
1172 size = roundup(sky2->netdev->mtu + ETH_HLEN + VLAN_HLEN, 8);
1173
1174 sky2->rx_nfrags = size >> PAGE_SHIFT;
1175 BUG_ON(sky2->rx_nfrags > ARRAY_SIZE(re->frag_addr));
1176
1177 /* Compute residue after pages */
1178 size -= sky2->rx_nfrags << PAGE_SHIFT;
1179
1180 /* Optimize to handle small packets and headers */
1181 if (size < copybreak)
1182 size = copybreak;
1183 if (size < ETH_HLEN)
1184 size = ETH_HLEN;
1185
1186 return size;
1187 }
1188
1189 /* Build description to hardware for one receive segment */
1190 static void sky2_rx_add(struct sky2_port *sky2, u8 op,
1191 dma_addr_t map, unsigned len)
1192 {
1193 struct sky2_rx_le *le;
1194
1195 if (sizeof(dma_addr_t) > sizeof(u32)) {
1196 le = sky2_next_rx(sky2);
1197 le->addr = cpu_to_le32(upper_32_bits(map));
1198 le->opcode = OP_ADDR64 | HW_OWNER;
1199 }
1200
1201 le = sky2_next_rx(sky2);
1202 le->addr = cpu_to_le32(lower_32_bits(map));
1203 le->length = cpu_to_le16(len);
1204 le->opcode = op | HW_OWNER;
1205 }
1206
1207 /* Build description to hardware for one possibly fragmented skb */
1208 static void sky2_rx_submit(struct sky2_port *sky2,
1209 const struct rx_ring_info *re)
1210 {
1211 int i;
1212
1213 sky2_rx_add(sky2, OP_PACKET, re->data_addr, sky2->rx_data_size);
1214
1215 for (i = 0; i < skb_shinfo(re->skb)->nr_frags; i++)
1216 sky2_rx_add(sky2, OP_BUFFER, re->frag_addr[i], PAGE_SIZE);
1217 }
1218
1219
1220 static int sky2_rx_map_skb(struct pci_dev *pdev, struct rx_ring_info *re,
1221 unsigned size)
1222 {
1223 struct sk_buff *skb = re->skb;
1224 int i;
1225
1226 re->data_addr = pci_map_single(pdev, skb->data, size, PCI_DMA_FROMDEVICE);
1227 if (pci_dma_mapping_error(pdev, re->data_addr))
1228 goto mapping_error;
1229
1230 dma_unmap_len_set(re, data_size, size);
1231
1232 for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
1233 const skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
1234
1235 re->frag_addr[i] = skb_frag_dma_map(&pdev->dev, frag, 0,
1236 skb_frag_size(frag),
1237 DMA_FROM_DEVICE);
1238
1239 if (dma_mapping_error(&pdev->dev, re->frag_addr[i]))
1240 goto map_page_error;
1241 }
1242 return 0;
1243
1244 map_page_error:
1245 while (--i >= 0) {
1246 pci_unmap_page(pdev, re->frag_addr[i],
1247 skb_frag_size(&skb_shinfo(skb)->frags[i]),
1248 PCI_DMA_FROMDEVICE);
1249 }
1250
1251 pci_unmap_single(pdev, re->data_addr, dma_unmap_len(re, data_size),
1252 PCI_DMA_FROMDEVICE);
1253
1254 mapping_error:
1255 if (net_ratelimit())
1256 dev_warn(&pdev->dev, "%s: rx mapping error\n",
1257 skb->dev->name);
1258 return -EIO;
1259 }
1260
1261 static void sky2_rx_unmap_skb(struct pci_dev *pdev, struct rx_ring_info *re)
1262 {
1263 struct sk_buff *skb = re->skb;
1264 int i;
1265
1266 pci_unmap_single(pdev, re->data_addr, dma_unmap_len(re, data_size),
1267 PCI_DMA_FROMDEVICE);
1268
1269 for (i = 0; i < skb_shinfo(skb)->nr_frags; i++)
1270 pci_unmap_page(pdev, re->frag_addr[i],
1271 skb_frag_size(&skb_shinfo(skb)->frags[i]),
1272 PCI_DMA_FROMDEVICE);
1273 }
1274
1275 /* Tell chip where to start receive checksum.
1276 * Actually has two checksums, but set both same to avoid possible byte
1277 * order problems.
1278 */
1279 static void rx_set_checksum(struct sky2_port *sky2)
1280 {
1281 struct sky2_rx_le *le = sky2_next_rx(sky2);
1282
1283 le->addr = cpu_to_le32((ETH_HLEN << 16) | ETH_HLEN);
1284 le->ctrl = 0;
1285 le->opcode = OP_TCPSTART | HW_OWNER;
1286
1287 sky2_write32(sky2->hw,
1288 Q_ADDR(rxqaddr[sky2->port], Q_CSR),
1289 (sky2->netdev->features & NETIF_F_RXCSUM)
1290 ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM);
1291 }
1292
1293 /* Enable/disable receive hash calculation (RSS) */
1294 static void rx_set_rss(struct net_device *dev, netdev_features_t features)
1295 {
1296 struct sky2_port *sky2 = netdev_priv(dev);
1297 struct sky2_hw *hw = sky2->hw;
1298 int i, nkeys = 4;
1299
1300 /* Supports IPv6 and other modes */
1301 if (hw->flags & SKY2_HW_NEW_LE) {
1302 nkeys = 10;
1303 sky2_write32(hw, SK_REG(sky2->port, RSS_CFG), HASH_ALL);
1304 }
1305
1306 /* Program RSS initial values */
1307 if (features & NETIF_F_RXHASH) {
1308 u32 rss_key[10];
1309
1310 netdev_rss_key_fill(rss_key, sizeof(rss_key));
1311 for (i = 0; i < nkeys; i++)
1312 sky2_write32(hw, SK_REG(sky2->port, RSS_KEY + i * 4),
1313 rss_key[i]);
1314
1315 /* Need to turn on (undocumented) flag to make hashing work */
1316 sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T),
1317 RX_STFW_ENA);
1318
1319 sky2_write32(hw, Q_ADDR(rxqaddr[sky2->port], Q_CSR),
1320 BMU_ENA_RX_RSS_HASH);
1321 } else
1322 sky2_write32(hw, Q_ADDR(rxqaddr[sky2->port], Q_CSR),
1323 BMU_DIS_RX_RSS_HASH);
1324 }
1325
1326 /*
1327 * The RX Stop command will not work for Yukon-2 if the BMU does not
1328 * reach the end of packet and since we can't make sure that we have
1329 * incoming data, we must reset the BMU while it is not doing a DMA
1330 * transfer. Since it is possible that the RX path is still active,
1331 * the RX RAM buffer will be stopped first, so any possible incoming
1332 * data will not trigger a DMA. After the RAM buffer is stopped, the
1333 * BMU is polled until any DMA in progress is ended and only then it
1334 * will be reset.
1335 */
1336 static void sky2_rx_stop(struct sky2_port *sky2)
1337 {
1338 struct sky2_hw *hw = sky2->hw;
1339 unsigned rxq = rxqaddr[sky2->port];
1340 int i;
1341
1342 /* disable the RAM Buffer receive queue */
1343 sky2_write8(hw, RB_ADDR(rxq, RB_CTRL), RB_DIS_OP_MD);
1344
1345 for (i = 0; i < 0xffff; i++)
1346 if (sky2_read8(hw, RB_ADDR(rxq, Q_RSL))
1347 == sky2_read8(hw, RB_ADDR(rxq, Q_RL)))
1348 goto stopped;
1349
1350 netdev_warn(sky2->netdev, "receiver stop failed\n");
1351 stopped:
1352 sky2_write32(hw, Q_ADDR(rxq, Q_CSR), BMU_RST_SET | BMU_FIFO_RST);
1353
1354 /* reset the Rx prefetch unit */
1355 sky2_write32(hw, Y2_QADDR(rxq, PREF_UNIT_CTRL), PREF_UNIT_RST_SET);
1356 mmiowb();
1357 }
1358
1359 /* Clean out receive buffer area, assumes receiver hardware stopped */
1360 static void sky2_rx_clean(struct sky2_port *sky2)
1361 {
1362 unsigned i;
1363
1364 if (sky2->rx_le)
1365 memset(sky2->rx_le, 0, RX_LE_BYTES);
1366
1367 for (i = 0; i < sky2->rx_pending; i++) {
1368 struct rx_ring_info *re = sky2->rx_ring + i;
1369
1370 if (re->skb) {
1371 sky2_rx_unmap_skb(sky2->hw->pdev, re);
1372 kfree_skb(re->skb);
1373 re->skb = NULL;
1374 }
1375 }
1376 }
1377
1378 /* Basic MII support */
1379 static int sky2_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
1380 {
1381 struct mii_ioctl_data *data = if_mii(ifr);
1382 struct sky2_port *sky2 = netdev_priv(dev);
1383 struct sky2_hw *hw = sky2->hw;
1384 int err = -EOPNOTSUPP;
1385
1386 if (!netif_running(dev))
1387 return -ENODEV; /* Phy still in reset */
1388
1389 switch (cmd) {
1390 case SIOCGMIIPHY:
1391 data->phy_id = PHY_ADDR_MARV;
1392
1393 /* fallthru */
1394 case SIOCGMIIREG: {
1395 u16 val = 0;
1396
1397 spin_lock_bh(&sky2->phy_lock);
1398 err = __gm_phy_read(hw, sky2->port, data->reg_num & 0x1f, &val);
1399 spin_unlock_bh(&sky2->phy_lock);
1400
1401 data->val_out = val;
1402 break;
1403 }
1404
1405 case SIOCSMIIREG:
1406 spin_lock_bh(&sky2->phy_lock);
1407 err = gm_phy_write(hw, sky2->port, data->reg_num & 0x1f,
1408 data->val_in);
1409 spin_unlock_bh(&sky2->phy_lock);
1410 break;
1411 }
1412 return err;
1413 }
1414
1415 #define SKY2_VLAN_OFFLOADS (NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_TSO)
1416
1417 static void sky2_vlan_mode(struct net_device *dev, netdev_features_t features)
1418 {
1419 struct sky2_port *sky2 = netdev_priv(dev);
1420 struct sky2_hw *hw = sky2->hw;
1421 u16 port = sky2->port;
1422
1423 if (features & NETIF_F_HW_VLAN_CTAG_RX)
1424 sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T),
1425 RX_VLAN_STRIP_ON);
1426 else
1427 sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T),
1428 RX_VLAN_STRIP_OFF);
1429
1430 if (features & NETIF_F_HW_VLAN_CTAG_TX) {
1431 sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
1432 TX_VLAN_TAG_ON);
1433
1434 dev->vlan_features |= SKY2_VLAN_OFFLOADS;
1435 } else {
1436 sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
1437 TX_VLAN_TAG_OFF);
1438
1439 /* Can't do transmit offload of vlan without hw vlan */
1440 dev->vlan_features &= ~SKY2_VLAN_OFFLOADS;
1441 }
1442 }
1443
1444 /* Amount of required worst case padding in rx buffer */
1445 static inline unsigned sky2_rx_pad(const struct sky2_hw *hw)
1446 {
1447 return (hw->flags & SKY2_HW_RAM_BUFFER) ? 8 : 2;
1448 }
1449
1450 /*
1451 * Allocate an skb for receiving. If the MTU is large enough
1452 * make the skb non-linear with a fragment list of pages.
1453 */
1454 static struct sk_buff *sky2_rx_alloc(struct sky2_port *sky2, gfp_t gfp)
1455 {
1456 struct sk_buff *skb;
1457 int i;
1458
1459 skb = __netdev_alloc_skb(sky2->netdev,
1460 sky2->rx_data_size + sky2_rx_pad(sky2->hw),
1461 gfp);
1462 if (!skb)
1463 goto nomem;
1464
1465 if (sky2->hw->flags & SKY2_HW_RAM_BUFFER) {
1466 unsigned char *start;
1467 /*
1468 * Workaround for a bug in FIFO that cause hang
1469 * if the FIFO if the receive buffer is not 64 byte aligned.
1470 * The buffer returned from netdev_alloc_skb is
1471 * aligned except if slab debugging is enabled.
1472 */
1473 start = PTR_ALIGN(skb->data, 8);
1474 skb_reserve(skb, start - skb->data);
1475 } else
1476 skb_reserve(skb, NET_IP_ALIGN);
1477
1478 for (i = 0; i < sky2->rx_nfrags; i++) {
1479 struct page *page = alloc_page(gfp);
1480
1481 if (!page)
1482 goto free_partial;
1483 skb_fill_page_desc(skb, i, page, 0, PAGE_SIZE);
1484 }
1485
1486 return skb;
1487 free_partial:
1488 kfree_skb(skb);
1489 nomem:
1490 return NULL;
1491 }
1492
1493 static inline void sky2_rx_update(struct sky2_port *sky2, unsigned rxq)
1494 {
1495 sky2_put_idx(sky2->hw, rxq, sky2->rx_put);
1496 }
1497
1498 static int sky2_alloc_rx_skbs(struct sky2_port *sky2)
1499 {
1500 struct sky2_hw *hw = sky2->hw;
1501 unsigned i;
1502
1503 sky2->rx_data_size = sky2_get_rx_data_size(sky2);
1504
1505 /* Fill Rx ring */
1506 for (i = 0; i < sky2->rx_pending; i++) {
1507 struct rx_ring_info *re = sky2->rx_ring + i;
1508
1509 re->skb = sky2_rx_alloc(sky2, GFP_KERNEL);
1510 if (!re->skb)
1511 return -ENOMEM;
1512
1513 if (sky2_rx_map_skb(hw->pdev, re, sky2->rx_data_size)) {
1514 dev_kfree_skb(re->skb);
1515 re->skb = NULL;
1516 return -ENOMEM;
1517 }
1518 }
1519 return 0;
1520 }
1521
1522 /*
1523 * Setup receiver buffer pool.
1524 * Normal case this ends up creating one list element for skb
1525 * in the receive ring. Worst case if using large MTU and each
1526 * allocation falls on a different 64 bit region, that results
1527 * in 6 list elements per ring entry.
1528 * One element is used for checksum enable/disable, and one
1529 * extra to avoid wrap.
1530 */
1531 static void sky2_rx_start(struct sky2_port *sky2)
1532 {
1533 struct sky2_hw *hw = sky2->hw;
1534 struct rx_ring_info *re;
1535 unsigned rxq = rxqaddr[sky2->port];
1536 unsigned i, thresh;
1537
1538 sky2->rx_put = sky2->rx_next = 0;
1539 sky2_qset(hw, rxq);
1540
1541 /* On PCI express lowering the watermark gives better performance */
1542 if (pci_is_pcie(hw->pdev))
1543 sky2_write32(hw, Q_ADDR(rxq, Q_WM), BMU_WM_PEX);
1544
1545 /* These chips have no ram buffer?
1546 * MAC Rx RAM Read is controlled by hardware */
1547 if (hw->chip_id == CHIP_ID_YUKON_EC_U &&
1548 hw->chip_rev > CHIP_REV_YU_EC_U_A0)
1549 sky2_write32(hw, Q_ADDR(rxq, Q_TEST), F_M_RX_RAM_DIS);
1550
1551 sky2_prefetch_init(hw, rxq, sky2->rx_le_map, RX_LE_SIZE - 1);
1552
1553 if (!(hw->flags & SKY2_HW_NEW_LE))
1554 rx_set_checksum(sky2);
1555
1556 if (!(hw->flags & SKY2_HW_RSS_BROKEN))
1557 rx_set_rss(sky2->netdev, sky2->netdev->features);
1558
1559 /* submit Rx ring */
1560 for (i = 0; i < sky2->rx_pending; i++) {
1561 re = sky2->rx_ring + i;
1562 sky2_rx_submit(sky2, re);
1563 }
1564
1565 /*
1566 * The receiver hangs if it receives frames larger than the
1567 * packet buffer. As a workaround, truncate oversize frames, but
1568 * the register is limited to 9 bits, so if you do frames > 2052
1569 * you better get the MTU right!
1570 */
1571 thresh = sky2_get_rx_threshold(sky2);
1572 if (thresh > 0x1ff)
1573 sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_OFF);
1574 else {
1575 sky2_write16(hw, SK_REG(sky2->port, RX_GMF_TR_THR), thresh);
1576 sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_ON);
1577 }
1578
1579 /* Tell chip about available buffers */
1580 sky2_rx_update(sky2, rxq);
1581
1582 if (hw->chip_id == CHIP_ID_YUKON_EX ||
1583 hw->chip_id == CHIP_ID_YUKON_SUPR) {
1584 /*
1585 * Disable flushing of non ASF packets;
1586 * must be done after initializing the BMUs;
1587 * drivers without ASF support should do this too, otherwise
1588 * it may happen that they cannot run on ASF devices;
1589 * remember that the MAC FIFO isn't reset during initialization.
1590 */
1591 sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_MACSEC_FLUSH_OFF);
1592 }
1593
1594 if (hw->chip_id >= CHIP_ID_YUKON_SUPR) {
1595 /* Enable RX Home Address & Routing Header checksum fix */
1596 sky2_write16(hw, SK_REG(sky2->port, RX_GMF_FL_CTRL),
1597 RX_IPV6_SA_MOB_ENA | RX_IPV6_DA_MOB_ENA);
1598
1599 /* Enable TX Home Address & Routing Header checksum fix */
1600 sky2_write32(hw, Q_ADDR(txqaddr[sky2->port], Q_TEST),
1601 TBMU_TEST_HOME_ADD_FIX_EN | TBMU_TEST_ROUTING_ADD_FIX_EN);
1602 }
1603 }
1604
1605 static int sky2_alloc_buffers(struct sky2_port *sky2)
1606 {
1607 struct sky2_hw *hw = sky2->hw;
1608
1609 /* must be power of 2 */
1610 sky2->tx_le = pci_alloc_consistent(hw->pdev,
1611 sky2->tx_ring_size *
1612 sizeof(struct sky2_tx_le),
1613 &sky2->tx_le_map);
1614 if (!sky2->tx_le)
1615 goto nomem;
1616
1617 sky2->tx_ring = kcalloc(sky2->tx_ring_size, sizeof(struct tx_ring_info),
1618 GFP_KERNEL);
1619 if (!sky2->tx_ring)
1620 goto nomem;
1621
1622 sky2->rx_le = pci_zalloc_consistent(hw->pdev, RX_LE_BYTES,
1623 &sky2->rx_le_map);
1624 if (!sky2->rx_le)
1625 goto nomem;
1626
1627 sky2->rx_ring = kcalloc(sky2->rx_pending, sizeof(struct rx_ring_info),
1628 GFP_KERNEL);
1629 if (!sky2->rx_ring)
1630 goto nomem;
1631
1632 return sky2_alloc_rx_skbs(sky2);
1633 nomem:
1634 return -ENOMEM;
1635 }
1636
1637 static void sky2_free_buffers(struct sky2_port *sky2)
1638 {
1639 struct sky2_hw *hw = sky2->hw;
1640
1641 sky2_rx_clean(sky2);
1642
1643 if (sky2->rx_le) {
1644 pci_free_consistent(hw->pdev, RX_LE_BYTES,
1645 sky2->rx_le, sky2->rx_le_map);
1646 sky2->rx_le = NULL;
1647 }
1648 if (sky2->tx_le) {
1649 pci_free_consistent(hw->pdev,
1650 sky2->tx_ring_size * sizeof(struct sky2_tx_le),
1651 sky2->tx_le, sky2->tx_le_map);
1652 sky2->tx_le = NULL;
1653 }
1654 kfree(sky2->tx_ring);
1655 kfree(sky2->rx_ring);
1656
1657 sky2->tx_ring = NULL;
1658 sky2->rx_ring = NULL;
1659 }
1660
1661 static void sky2_hw_up(struct sky2_port *sky2)
1662 {
1663 struct sky2_hw *hw = sky2->hw;
1664 unsigned port = sky2->port;
1665 u32 ramsize;
1666 int cap;
1667 struct net_device *otherdev = hw->dev[sky2->port^1];
1668
1669 tx_init(sky2);
1670
1671 /*
1672 * On dual port PCI-X card, there is an problem where status
1673 * can be received out of order due to split transactions
1674 */
1675 if (otherdev && netif_running(otherdev) &&
1676 (cap = pci_find_capability(hw->pdev, PCI_CAP_ID_PCIX))) {
1677 u16 cmd;
1678
1679 cmd = sky2_pci_read16(hw, cap + PCI_X_CMD);
1680 cmd &= ~PCI_X_CMD_MAX_SPLIT;
1681 sky2_pci_write16(hw, cap + PCI_X_CMD, cmd);
1682 }
1683
1684 sky2_mac_init(hw, port);
1685
1686 /* Register is number of 4K blocks on internal RAM buffer. */
1687 ramsize = sky2_read8(hw, B2_E_0) * 4;
1688 if (ramsize > 0) {
1689 u32 rxspace;
1690
1691 netdev_dbg(sky2->netdev, "ram buffer %dK\n", ramsize);
1692 if (ramsize < 16)
1693 rxspace = ramsize / 2;
1694 else
1695 rxspace = 8 + (2*(ramsize - 16))/3;
1696
1697 sky2_ramset(hw, rxqaddr[port], 0, rxspace);
1698 sky2_ramset(hw, txqaddr[port], rxspace, ramsize - rxspace);
1699
1700 /* Make sure SyncQ is disabled */
1701 sky2_write8(hw, RB_ADDR(port == 0 ? Q_XS1 : Q_XS2, RB_CTRL),
1702 RB_RST_SET);
1703 }
1704
1705 sky2_qset(hw, txqaddr[port]);
1706
1707 /* This is copied from sk98lin 10.0.5.3; no one tells me about erratta's */
1708 if (hw->chip_id == CHIP_ID_YUKON_EX && hw->chip_rev == CHIP_REV_YU_EX_B0)
1709 sky2_write32(hw, Q_ADDR(txqaddr[port], Q_TEST), F_TX_CHK_AUTO_OFF);
1710
1711 /* Set almost empty threshold */
1712 if (hw->chip_id == CHIP_ID_YUKON_EC_U &&
1713 hw->chip_rev == CHIP_REV_YU_EC_U_A0)
1714 sky2_write16(hw, Q_ADDR(txqaddr[port], Q_AL), ECU_TXFF_LEV);
1715
1716 sky2_prefetch_init(hw, txqaddr[port], sky2->tx_le_map,
1717 sky2->tx_ring_size - 1);
1718
1719 sky2_vlan_mode(sky2->netdev, sky2->netdev->features);
1720 netdev_update_features(sky2->netdev);
1721
1722 sky2_rx_start(sky2);
1723 }
1724
1725 /* Setup device IRQ and enable napi to process */
1726 static int sky2_setup_irq(struct sky2_hw *hw, const char *name)
1727 {
1728 struct pci_dev *pdev = hw->pdev;
1729 int err;
1730
1731 err = request_irq(pdev->irq, sky2_intr,
1732 (hw->flags & SKY2_HW_USE_MSI) ? 0 : IRQF_SHARED,
1733 name, hw);
1734 if (err)
1735 dev_err(&pdev->dev, "cannot assign irq %d\n", pdev->irq);
1736 else {
1737 hw->flags |= SKY2_HW_IRQ_SETUP;
1738
1739 napi_enable(&hw->napi);
1740 sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
1741 sky2_read32(hw, B0_IMSK);
1742 }
1743
1744 return err;
1745 }
1746
1747
1748 /* Bring up network interface. */
1749 static int sky2_open(struct net_device *dev)
1750 {
1751 struct sky2_port *sky2 = netdev_priv(dev);
1752 struct sky2_hw *hw = sky2->hw;
1753 unsigned port = sky2->port;
1754 u32 imask;
1755 int err;
1756
1757 netif_carrier_off(dev);
1758
1759 err = sky2_alloc_buffers(sky2);
1760 if (err)
1761 goto err_out;
1762
1763 /* With single port, IRQ is setup when device is brought up */
1764 if (hw->ports == 1 && (err = sky2_setup_irq(hw, dev->name)))
1765 goto err_out;
1766
1767 sky2_hw_up(sky2);
1768
1769 /* Enable interrupts from phy/mac for port */
1770 imask = sky2_read32(hw, B0_IMSK);
1771
1772 if (hw->chip_id == CHIP_ID_YUKON_OPT ||
1773 hw->chip_id == CHIP_ID_YUKON_PRM ||
1774 hw->chip_id == CHIP_ID_YUKON_OP_2)
1775 imask |= Y2_IS_PHY_QLNK; /* enable PHY Quick Link */
1776
1777 imask |= portirq_msk[port];
1778 sky2_write32(hw, B0_IMSK, imask);
1779 sky2_read32(hw, B0_IMSK);
1780
1781 netif_info(sky2, ifup, dev, "enabling interface\n");
1782
1783 return 0;
1784
1785 err_out:
1786 sky2_free_buffers(sky2);
1787 return err;
1788 }
1789
1790 /* Modular subtraction in ring */
1791 static inline int tx_inuse(const struct sky2_port *sky2)
1792 {
1793 return (sky2->tx_prod - sky2->tx_cons) & (sky2->tx_ring_size - 1);
1794 }
1795
1796 /* Number of list elements available for next tx */
1797 static inline int tx_avail(const struct sky2_port *sky2)
1798 {
1799 return sky2->tx_pending - tx_inuse(sky2);
1800 }
1801
1802 /* Estimate of number of transmit list elements required */
1803 static unsigned tx_le_req(const struct sk_buff *skb)
1804 {
1805 unsigned count;
1806
1807 count = (skb_shinfo(skb)->nr_frags + 1)
1808 * (sizeof(dma_addr_t) / sizeof(u32));
1809
1810 if (skb_is_gso(skb))
1811 ++count;
1812 else if (sizeof(dma_addr_t) == sizeof(u32))
1813 ++count; /* possible vlan */
1814
1815 if (skb->ip_summed == CHECKSUM_PARTIAL)
1816 ++count;
1817
1818 return count;
1819 }
1820
1821 static void sky2_tx_unmap(struct pci_dev *pdev, struct tx_ring_info *re)
1822 {
1823 if (re->flags & TX_MAP_SINGLE)
1824 pci_unmap_single(pdev, dma_unmap_addr(re, mapaddr),
1825 dma_unmap_len(re, maplen),
1826 PCI_DMA_TODEVICE);
1827 else if (re->flags & TX_MAP_PAGE)
1828 pci_unmap_page(pdev, dma_unmap_addr(re, mapaddr),
1829 dma_unmap_len(re, maplen),
1830 PCI_DMA_TODEVICE);
1831 re->flags = 0;
1832 }
1833
1834 /*
1835 * Put one packet in ring for transmit.
1836 * A single packet can generate multiple list elements, and
1837 * the number of ring elements will probably be less than the number
1838 * of list elements used.
1839 */
1840 static netdev_tx_t sky2_xmit_frame(struct sk_buff *skb,
1841 struct net_device *dev)
1842 {
1843 struct sky2_port *sky2 = netdev_priv(dev);
1844 struct sky2_hw *hw = sky2->hw;
1845 struct sky2_tx_le *le = NULL;
1846 struct tx_ring_info *re;
1847 unsigned i, len;
1848 dma_addr_t mapping;
1849 u32 upper;
1850 u16 slot;
1851 u16 mss;
1852 u8 ctrl;
1853
1854 if (unlikely(tx_avail(sky2) < tx_le_req(skb)))
1855 return NETDEV_TX_BUSY;
1856
1857 len = skb_headlen(skb);
1858 mapping = pci_map_single(hw->pdev, skb->data, len, PCI_DMA_TODEVICE);
1859
1860 if (pci_dma_mapping_error(hw->pdev, mapping))
1861 goto mapping_error;
1862
1863 slot = sky2->tx_prod;
1864 netif_printk(sky2, tx_queued, KERN_DEBUG, dev,
1865 "tx queued, slot %u, len %d\n", slot, skb->len);
1866
1867 /* Send high bits if needed */
1868 upper = upper_32_bits(mapping);
1869 if (upper != sky2->tx_last_upper) {
1870 le = get_tx_le(sky2, &slot);
1871 le->addr = cpu_to_le32(upper);
1872 sky2->tx_last_upper = upper;
1873 le->opcode = OP_ADDR64 | HW_OWNER;
1874 }
1875
1876 /* Check for TCP Segmentation Offload */
1877 mss = skb_shinfo(skb)->gso_size;
1878 if (mss != 0) {
1879
1880 if (!(hw->flags & SKY2_HW_NEW_LE))
1881 mss += ETH_HLEN + ip_hdrlen(skb) + tcp_hdrlen(skb);
1882
1883 if (mss != sky2->tx_last_mss) {
1884 le = get_tx_le(sky2, &slot);
1885 le->addr = cpu_to_le32(mss);
1886
1887 if (hw->flags & SKY2_HW_NEW_LE)
1888 le->opcode = OP_MSS | HW_OWNER;
1889 else
1890 le->opcode = OP_LRGLEN | HW_OWNER;
1891 sky2->tx_last_mss = mss;
1892 }
1893 }
1894
1895 ctrl = 0;
1896
1897 /* Add VLAN tag, can piggyback on LRGLEN or ADDR64 */
1898 if (skb_vlan_tag_present(skb)) {
1899 if (!le) {
1900 le = get_tx_le(sky2, &slot);
1901 le->addr = 0;
1902 le->opcode = OP_VLAN|HW_OWNER;
1903 } else
1904 le->opcode |= OP_VLAN;
1905 le->length = cpu_to_be16(skb_vlan_tag_get(skb));
1906 ctrl |= INS_VLAN;
1907 }
1908
1909 /* Handle TCP checksum offload */
1910 if (skb->ip_summed == CHECKSUM_PARTIAL) {
1911 /* On Yukon EX (some versions) encoding change. */
1912 if (hw->flags & SKY2_HW_AUTO_TX_SUM)
1913 ctrl |= CALSUM; /* auto checksum */
1914 else {
1915 const unsigned offset = skb_transport_offset(skb);
1916 u32 tcpsum;
1917
1918 tcpsum = offset << 16; /* sum start */
1919 tcpsum |= offset + skb->csum_offset; /* sum write */
1920
1921 ctrl |= CALSUM | WR_SUM | INIT_SUM | LOCK_SUM;
1922 if (ip_hdr(skb)->protocol == IPPROTO_UDP)
1923 ctrl |= UDPTCP;
1924
1925 if (tcpsum != sky2->tx_tcpsum) {
1926 sky2->tx_tcpsum = tcpsum;
1927
1928 le = get_tx_le(sky2, &slot);
1929 le->addr = cpu_to_le32(tcpsum);
1930 le->length = 0; /* initial checksum value */
1931 le->ctrl = 1; /* one packet */
1932 le->opcode = OP_TCPLISW | HW_OWNER;
1933 }
1934 }
1935 }
1936
1937 re = sky2->tx_ring + slot;
1938 re->flags = TX_MAP_SINGLE;
1939 dma_unmap_addr_set(re, mapaddr, mapping);
1940 dma_unmap_len_set(re, maplen, len);
1941
1942 le = get_tx_le(sky2, &slot);
1943 le->addr = cpu_to_le32(lower_32_bits(mapping));
1944 le->length = cpu_to_le16(len);
1945 le->ctrl = ctrl;
1946 le->opcode = mss ? (OP_LARGESEND | HW_OWNER) : (OP_PACKET | HW_OWNER);
1947
1948
1949 for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
1950 const skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
1951
1952 mapping = skb_frag_dma_map(&hw->pdev->dev, frag, 0,
1953 skb_frag_size(frag), DMA_TO_DEVICE);
1954
1955 if (dma_mapping_error(&hw->pdev->dev, mapping))
1956 goto mapping_unwind;
1957
1958 upper = upper_32_bits(mapping);
1959 if (upper != sky2->tx_last_upper) {
1960 le = get_tx_le(sky2, &slot);
1961 le->addr = cpu_to_le32(upper);
1962 sky2->tx_last_upper = upper;
1963 le->opcode = OP_ADDR64 | HW_OWNER;
1964 }
1965
1966 re = sky2->tx_ring + slot;
1967 re->flags = TX_MAP_PAGE;
1968 dma_unmap_addr_set(re, mapaddr, mapping);
1969 dma_unmap_len_set(re, maplen, skb_frag_size(frag));
1970
1971 le = get_tx_le(sky2, &slot);
1972 le->addr = cpu_to_le32(lower_32_bits(mapping));
1973 le->length = cpu_to_le16(skb_frag_size(frag));
1974 le->ctrl = ctrl;
1975 le->opcode = OP_BUFFER | HW_OWNER;
1976 }
1977
1978 re->skb = skb;
1979 le->ctrl |= EOP;
1980
1981 sky2->tx_prod = slot;
1982
1983 if (tx_avail(sky2) <= MAX_SKB_TX_LE)
1984 netif_stop_queue(dev);
1985
1986 netdev_sent_queue(dev, skb->len);
1987 sky2_put_idx(hw, txqaddr[sky2->port], sky2->tx_prod);
1988
1989 return NETDEV_TX_OK;
1990
1991 mapping_unwind:
1992 for (i = sky2->tx_prod; i != slot; i = RING_NEXT(i, sky2->tx_ring_size)) {
1993 re = sky2->tx_ring + i;
1994
1995 sky2_tx_unmap(hw->pdev, re);
1996 }
1997
1998 mapping_error:
1999 if (net_ratelimit())
2000 dev_warn(&hw->pdev->dev, "%s: tx mapping error\n", dev->name);
2001 dev_kfree_skb_any(skb);
2002 return NETDEV_TX_OK;
2003 }
2004
2005 /*
2006 * Free ring elements from starting at tx_cons until "done"
2007 *
2008 * NB:
2009 * 1. The hardware will tell us about partial completion of multi-part
2010 * buffers so make sure not to free skb to early.
2011 * 2. This may run in parallel start_xmit because the it only
2012 * looks at the tail of the queue of FIFO (tx_cons), not
2013 * the head (tx_prod)
2014 */
2015 static void sky2_tx_complete(struct sky2_port *sky2, u16 done)
2016 {
2017 struct net_device *dev = sky2->netdev;
2018 u16 idx;
2019 unsigned int bytes_compl = 0, pkts_compl = 0;
2020
2021 BUG_ON(done >= sky2->tx_ring_size);
2022
2023 for (idx = sky2->tx_cons; idx != done;
2024 idx = RING_NEXT(idx, sky2->tx_ring_size)) {
2025 struct tx_ring_info *re = sky2->tx_ring + idx;
2026 struct sk_buff *skb = re->skb;
2027
2028 sky2_tx_unmap(sky2->hw->pdev, re);
2029
2030 if (skb) {
2031 netif_printk(sky2, tx_done, KERN_DEBUG, dev,
2032 "tx done %u\n", idx);
2033
2034 pkts_compl++;
2035 bytes_compl += skb->len;
2036
2037 re->skb = NULL;
2038 dev_kfree_skb_any(skb);
2039
2040 sky2->tx_next = RING_NEXT(idx, sky2->tx_ring_size);
2041 }
2042 }
2043
2044 sky2->tx_cons = idx;
2045 smp_mb();
2046
2047 netdev_completed_queue(dev, pkts_compl, bytes_compl);
2048
2049 u64_stats_update_begin(&sky2->tx_stats.syncp);
2050 sky2->tx_stats.packets += pkts_compl;
2051 sky2->tx_stats.bytes += bytes_compl;
2052 u64_stats_update_end(&sky2->tx_stats.syncp);
2053 }
2054
2055 static void sky2_tx_reset(struct sky2_hw *hw, unsigned port)
2056 {
2057 /* Disable Force Sync bit and Enable Alloc bit */
2058 sky2_write8(hw, SK_REG(port, TXA_CTRL),
2059 TXA_DIS_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC);
2060
2061 /* Stop Interval Timer and Limit Counter of Tx Arbiter */
2062 sky2_write32(hw, SK_REG(port, TXA_ITI_INI), 0L);
2063 sky2_write32(hw, SK_REG(port, TXA_LIM_INI), 0L);
2064
2065 /* Reset the PCI FIFO of the async Tx queue */
2066 sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR),
2067 BMU_RST_SET | BMU_FIFO_RST);
2068
2069 /* Reset the Tx prefetch units */
2070 sky2_write32(hw, Y2_QADDR(txqaddr[port], PREF_UNIT_CTRL),
2071 PREF_UNIT_RST_SET);
2072
2073 sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL), RB_RST_SET);
2074 sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET);
2075
2076 sky2_read32(hw, B0_CTST);
2077 }
2078
2079 static void sky2_hw_down(struct sky2_port *sky2)
2080 {
2081 struct sky2_hw *hw = sky2->hw;
2082 unsigned port = sky2->port;
2083 u16 ctrl;
2084
2085 /* Force flow control off */
2086 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);
2087
2088 /* Stop transmitter */
2089 sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), BMU_STOP);
2090 sky2_read32(hw, Q_ADDR(txqaddr[port], Q_CSR));
2091
2092 sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL),
2093 RB_RST_SET | RB_DIS_OP_MD);
2094
2095 ctrl = gma_read16(hw, port, GM_GP_CTRL);
2096 ctrl &= ~(GM_GPCR_TX_ENA | GM_GPCR_RX_ENA);
2097 gma_write16(hw, port, GM_GP_CTRL, ctrl);
2098
2099 sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET);
2100
2101 /* Workaround shared GMAC reset */
2102 if (!(hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev == 0 &&
2103 port == 0 && hw->dev[1] && netif_running(hw->dev[1])))
2104 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_SET);
2105
2106 sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
2107
2108 /* Force any delayed status interrupt and NAPI */
2109 sky2_write32(hw, STAT_LEV_TIMER_CNT, 0);
2110 sky2_write32(hw, STAT_TX_TIMER_CNT, 0);
2111 sky2_write32(hw, STAT_ISR_TIMER_CNT, 0);
2112 sky2_read8(hw, STAT_ISR_TIMER_CTRL);
2113
2114 sky2_rx_stop(sky2);
2115
2116 spin_lock_bh(&sky2->phy_lock);
2117 sky2_phy_power_down(hw, port);
2118 spin_unlock_bh(&sky2->phy_lock);
2119
2120 sky2_tx_reset(hw, port);
2121
2122 /* Free any pending frames stuck in HW queue */
2123 sky2_tx_complete(sky2, sky2->tx_prod);
2124 }
2125
2126 /* Network shutdown */
2127 static int sky2_close(struct net_device *dev)
2128 {
2129 struct sky2_port *sky2 = netdev_priv(dev);
2130 struct sky2_hw *hw = sky2->hw;
2131
2132 /* Never really got started! */
2133 if (!sky2->tx_le)
2134 return 0;
2135
2136 netif_info(sky2, ifdown, dev, "disabling interface\n");
2137
2138 if (hw->ports == 1) {
2139 sky2_write32(hw, B0_IMSK, 0);
2140 sky2_read32(hw, B0_IMSK);
2141
2142 napi_disable(&hw->napi);
2143 free_irq(hw->pdev->irq, hw);
2144 hw->flags &= ~SKY2_HW_IRQ_SETUP;
2145 } else {
2146 u32 imask;
2147
2148 /* Disable port IRQ */
2149 imask = sky2_read32(hw, B0_IMSK);
2150 imask &= ~portirq_msk[sky2->port];
2151 sky2_write32(hw, B0_IMSK, imask);
2152 sky2_read32(hw, B0_IMSK);
2153
2154 synchronize_irq(hw->pdev->irq);
2155 napi_synchronize(&hw->napi);
2156 }
2157
2158 sky2_hw_down(sky2);
2159
2160 sky2_free_buffers(sky2);
2161
2162 return 0;
2163 }
2164
2165 static u16 sky2_phy_speed(const struct sky2_hw *hw, u16 aux)
2166 {
2167 if (hw->flags & SKY2_HW_FIBRE_PHY)
2168 return SPEED_1000;
2169
2170 if (!(hw->flags & SKY2_HW_GIGABIT)) {
2171 if (aux & PHY_M_PS_SPEED_100)
2172 return SPEED_100;
2173 else
2174 return SPEED_10;
2175 }
2176
2177 switch (aux & PHY_M_PS_SPEED_MSK) {
2178 case PHY_M_PS_SPEED_1000:
2179 return SPEED_1000;
2180 case PHY_M_PS_SPEED_100:
2181 return SPEED_100;
2182 default:
2183 return SPEED_10;
2184 }
2185 }
2186
2187 static void sky2_link_up(struct sky2_port *sky2)
2188 {
2189 struct sky2_hw *hw = sky2->hw;
2190 unsigned port = sky2->port;
2191 static const char *fc_name[] = {
2192 [FC_NONE] = "none",
2193 [FC_TX] = "tx",
2194 [FC_RX] = "rx",
2195 [FC_BOTH] = "both",
2196 };
2197
2198 sky2_set_ipg(sky2);
2199
2200 sky2_enable_rx_tx(sky2);
2201
2202 gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);
2203
2204 netif_carrier_on(sky2->netdev);
2205
2206 mod_timer(&hw->watchdog_timer, jiffies + 1);
2207
2208 /* Turn on link LED */
2209 sky2_write8(hw, SK_REG(port, LNK_LED_REG),
2210 LINKLED_ON | LINKLED_BLINK_OFF | LINKLED_LINKSYNC_OFF);
2211
2212 netif_info(sky2, link, sky2->netdev,
2213 "Link is up at %d Mbps, %s duplex, flow control %s\n",
2214 sky2->speed,
2215 sky2->duplex == DUPLEX_FULL ? "full" : "half",
2216 fc_name[sky2->flow_status]);
2217 }
2218
2219 static void sky2_link_down(struct sky2_port *sky2)
2220 {
2221 struct sky2_hw *hw = sky2->hw;
2222 unsigned port = sky2->port;
2223 u16 reg;
2224
2225 gm_phy_write(hw, port, PHY_MARV_INT_MASK, 0);
2226
2227 reg = gma_read16(hw, port, GM_GP_CTRL);
2228 reg &= ~(GM_GPCR_RX_ENA | GM_GPCR_TX_ENA);
2229 gma_write16(hw, port, GM_GP_CTRL, reg);
2230
2231 netif_carrier_off(sky2->netdev);
2232
2233 /* Turn off link LED */
2234 sky2_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_OFF);
2235
2236 netif_info(sky2, link, sky2->netdev, "Link is down\n");
2237
2238 sky2_phy_init(hw, port);
2239 }
2240
2241 static enum flow_control sky2_flow(int rx, int tx)
2242 {
2243 if (rx)
2244 return tx ? FC_BOTH : FC_RX;
2245 else
2246 return tx ? FC_TX : FC_NONE;
2247 }
2248
2249 static int sky2_autoneg_done(struct sky2_port *sky2, u16 aux)
2250 {
2251 struct sky2_hw *hw = sky2->hw;
2252 unsigned port = sky2->port;
2253 u16 advert, lpa;
2254
2255 advert = gm_phy_read(hw, port, PHY_MARV_AUNE_ADV);
2256 lpa = gm_phy_read(hw, port, PHY_MARV_AUNE_LP);
2257 if (lpa & PHY_M_AN_RF) {
2258 netdev_err(sky2->netdev, "remote fault\n");
2259 return -1;
2260 }
2261
2262 if (!(aux & PHY_M_PS_SPDUP_RES)) {
2263 netdev_err(sky2->netdev, "speed/duplex mismatch\n");
2264 return -1;
2265 }
2266
2267 sky2->speed = sky2_phy_speed(hw, aux);
2268 sky2->duplex = (aux & PHY_M_PS_FULL_DUP) ? DUPLEX_FULL : DUPLEX_HALF;
2269
2270 /* Since the pause result bits seem to in different positions on
2271 * different chips. look at registers.
2272 */
2273 if (hw->flags & SKY2_HW_FIBRE_PHY) {
2274 /* Shift for bits in fiber PHY */
2275 advert &= ~(ADVERTISE_PAUSE_CAP|ADVERTISE_PAUSE_ASYM);
2276 lpa &= ~(LPA_PAUSE_CAP|LPA_PAUSE_ASYM);
2277
2278 if (advert & ADVERTISE_1000XPAUSE)
2279 advert |= ADVERTISE_PAUSE_CAP;
2280 if (advert & ADVERTISE_1000XPSE_ASYM)
2281 advert |= ADVERTISE_PAUSE_ASYM;
2282 if (lpa & LPA_1000XPAUSE)
2283 lpa |= LPA_PAUSE_CAP;
2284 if (lpa & LPA_1000XPAUSE_ASYM)
2285 lpa |= LPA_PAUSE_ASYM;
2286 }
2287
2288 sky2->flow_status = FC_NONE;
2289 if (advert & ADVERTISE_PAUSE_CAP) {
2290 if (lpa & LPA_PAUSE_CAP)
2291 sky2->flow_status = FC_BOTH;
2292 else if (advert & ADVERTISE_PAUSE_ASYM)
2293 sky2->flow_status = FC_RX;
2294 } else if (advert & ADVERTISE_PAUSE_ASYM) {
2295 if ((lpa & LPA_PAUSE_CAP) && (lpa & LPA_PAUSE_ASYM))
2296 sky2->flow_status = FC_TX;
2297 }
2298
2299 if (sky2->duplex == DUPLEX_HALF && sky2->speed < SPEED_1000 &&
2300 !(hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_EX))
2301 sky2->flow_status = FC_NONE;
2302
2303 if (sky2->flow_status & FC_TX)
2304 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_ON);
2305 else
2306 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);
2307
2308 return 0;
2309 }
2310
2311 /* Interrupt from PHY */
2312 static void sky2_phy_intr(struct sky2_hw *hw, unsigned port)
2313 {
2314 struct net_device *dev = hw->dev[port];
2315 struct sky2_port *sky2 = netdev_priv(dev);
2316 u16 istatus, phystat;
2317
2318 if (!netif_running(dev))
2319 return;
2320
2321 spin_lock(&sky2->phy_lock);
2322 istatus = gm_phy_read(hw, port, PHY_MARV_INT_STAT);
2323 phystat = gm_phy_read(hw, port, PHY_MARV_PHY_STAT);
2324
2325 netif_info(sky2, intr, sky2->netdev, "phy interrupt status 0x%x 0x%x\n",
2326 istatus, phystat);
2327
2328 if (istatus & PHY_M_IS_AN_COMPL) {
2329 if (sky2_autoneg_done(sky2, phystat) == 0 &&
2330 !netif_carrier_ok(dev))
2331 sky2_link_up(sky2);
2332 goto out;
2333 }
2334
2335 if (istatus & PHY_M_IS_LSP_CHANGE)
2336 sky2->speed = sky2_phy_speed(hw, phystat);
2337
2338 if (istatus & PHY_M_IS_DUP_CHANGE)
2339 sky2->duplex =
2340 (phystat & PHY_M_PS_FULL_DUP) ? DUPLEX_FULL : DUPLEX_HALF;
2341
2342 if (istatus & PHY_M_IS_LST_CHANGE) {
2343 if (phystat & PHY_M_PS_LINK_UP)
2344 sky2_link_up(sky2);
2345 else
2346 sky2_link_down(sky2);
2347 }
2348 out:
2349 spin_unlock(&sky2->phy_lock);
2350 }
2351
2352 /* Special quick link interrupt (Yukon-2 Optima only) */
2353 static void sky2_qlink_intr(struct sky2_hw *hw)
2354 {
2355 struct sky2_port *sky2 = netdev_priv(hw->dev[0]);
2356 u32 imask;
2357 u16 phy;
2358
2359 /* disable irq */
2360 imask = sky2_read32(hw, B0_IMSK);
2361 imask &= ~Y2_IS_PHY_QLNK;
2362 sky2_write32(hw, B0_IMSK, imask);
2363
2364 /* reset PHY Link Detect */
2365 phy = sky2_pci_read16(hw, PSM_CONFIG_REG4);
2366 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
2367 sky2_pci_write16(hw, PSM_CONFIG_REG4, phy | 1);
2368 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
2369
2370 sky2_link_up(sky2);
2371 }
2372
2373 /* Transmit timeout is only called if we are running, carrier is up
2374 * and tx queue is full (stopped).
2375 */
2376 static void sky2_tx_timeout(struct net_device *dev)
2377 {
2378 struct sky2_port *sky2 = netdev_priv(dev);
2379 struct sky2_hw *hw = sky2->hw;
2380
2381 netif_err(sky2, timer, dev, "tx timeout\n");
2382
2383 netdev_printk(KERN_DEBUG, dev, "transmit ring %u .. %u report=%u done=%u\n",
2384 sky2->tx_cons, sky2->tx_prod,
2385 sky2_read16(hw, sky2->port == 0 ? STAT_TXA1_RIDX : STAT_TXA2_RIDX),
2386 sky2_read16(hw, Q_ADDR(txqaddr[sky2->port], Q_DONE)));
2387
2388 /* can't restart safely under softirq */
2389 schedule_work(&hw->restart_work);
2390 }
2391
2392 static int sky2_change_mtu(struct net_device *dev, int new_mtu)
2393 {
2394 struct sky2_port *sky2 = netdev_priv(dev);
2395 struct sky2_hw *hw = sky2->hw;
2396 unsigned port = sky2->port;
2397 int err;
2398 u16 ctl, mode;
2399 u32 imask;
2400
2401 /* MTU size outside the spec */
2402 if (new_mtu < ETH_ZLEN || new_mtu > ETH_JUMBO_MTU)
2403 return -EINVAL;
2404
2405 /* MTU > 1500 on yukon FE and FE+ not allowed */
2406 if (new_mtu > ETH_DATA_LEN &&
2407 (hw->chip_id == CHIP_ID_YUKON_FE ||
2408 hw->chip_id == CHIP_ID_YUKON_FE_P))
2409 return -EINVAL;
2410
2411 if (!netif_running(dev)) {
2412 dev->mtu = new_mtu;
2413 netdev_update_features(dev);
2414 return 0;
2415 }
2416
2417 imask = sky2_read32(hw, B0_IMSK);
2418 sky2_write32(hw, B0_IMSK, 0);
2419 sky2_read32(hw, B0_IMSK);
2420
2421 netif_trans_update(dev); /* prevent tx timeout */
2422 napi_disable(&hw->napi);
2423 netif_tx_disable(dev);
2424
2425 synchronize_irq(hw->pdev->irq);
2426
2427 if (!(hw->flags & SKY2_HW_RAM_BUFFER))
2428 sky2_set_tx_stfwd(hw, port);
2429
2430 ctl = gma_read16(hw, port, GM_GP_CTRL);
2431 gma_write16(hw, port, GM_GP_CTRL, ctl & ~GM_GPCR_RX_ENA);
2432 sky2_rx_stop(sky2);
2433 sky2_rx_clean(sky2);
2434
2435 dev->mtu = new_mtu;
2436 netdev_update_features(dev);
2437
2438 mode = DATA_BLIND_VAL(DATA_BLIND_DEF) | GM_SMOD_VLAN_ENA;
2439 if (sky2->speed > SPEED_100)
2440 mode |= IPG_DATA_VAL(IPG_DATA_DEF_1000);
2441 else
2442 mode |= IPG_DATA_VAL(IPG_DATA_DEF_10_100);
2443
2444 if (dev->mtu > ETH_DATA_LEN)
2445 mode |= GM_SMOD_JUMBO_ENA;
2446
2447 gma_write16(hw, port, GM_SERIAL_MODE, mode);
2448
2449 sky2_write8(hw, RB_ADDR(rxqaddr[port], RB_CTRL), RB_ENA_OP_MD);
2450
2451 err = sky2_alloc_rx_skbs(sky2);
2452 if (!err)
2453 sky2_rx_start(sky2);
2454 else
2455 sky2_rx_clean(sky2);
2456 sky2_write32(hw, B0_IMSK, imask);
2457
2458 sky2_read32(hw, B0_Y2_SP_LISR);
2459 napi_enable(&hw->napi);
2460
2461 if (err)
2462 dev_close(dev);
2463 else {
2464 gma_write16(hw, port, GM_GP_CTRL, ctl);
2465
2466 netif_wake_queue(dev);
2467 }
2468
2469 return err;
2470 }
2471
2472 static inline bool needs_copy(const struct rx_ring_info *re,
2473 unsigned length)
2474 {
2475 #ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
2476 /* Some architectures need the IP header to be aligned */
2477 if (!IS_ALIGNED(re->data_addr + ETH_HLEN, sizeof(u32)))
2478 return true;
2479 #endif
2480 return length < copybreak;
2481 }
2482
2483 /* For small just reuse existing skb for next receive */
2484 static struct sk_buff *receive_copy(struct sky2_port *sky2,
2485 const struct rx_ring_info *re,
2486 unsigned length)
2487 {
2488 struct sk_buff *skb;
2489
2490 skb = netdev_alloc_skb_ip_align(sky2->netdev, length);
2491 if (likely(skb)) {
2492 pci_dma_sync_single_for_cpu(sky2->hw->pdev, re->data_addr,
2493 length, PCI_DMA_FROMDEVICE);
2494 skb_copy_from_linear_data(re->skb, skb->data, length);
2495 skb->ip_summed = re->skb->ip_summed;
2496 skb->csum = re->skb->csum;
2497 skb_copy_hash(skb, re->skb);
2498 skb->vlan_proto = re->skb->vlan_proto;
2499 skb->vlan_tci = re->skb->vlan_tci;
2500
2501 pci_dma_sync_single_for_device(sky2->hw->pdev, re->data_addr,
2502 length, PCI_DMA_FROMDEVICE);
2503 re->skb->vlan_proto = 0;
2504 re->skb->vlan_tci = 0;
2505 skb_clear_hash(re->skb);
2506 re->skb->ip_summed = CHECKSUM_NONE;
2507 skb_put(skb, length);
2508 }
2509 return skb;
2510 }
2511
2512 /* Adjust length of skb with fragments to match received data */
2513 static void skb_put_frags(struct sk_buff *skb, unsigned int hdr_space,
2514 unsigned int length)
2515 {
2516 int i, num_frags;
2517 unsigned int size;
2518
2519 /* put header into skb */
2520 size = min(length, hdr_space);
2521 skb->tail += size;
2522 skb->len += size;
2523 length -= size;
2524
2525 num_frags = skb_shinfo(skb)->nr_frags;
2526 for (i = 0; i < num_frags; i++) {
2527 skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
2528
2529 if (length == 0) {
2530 /* don't need this page */
2531 __skb_frag_unref(frag);
2532 --skb_shinfo(skb)->nr_frags;
2533 } else {
2534 size = min(length, (unsigned) PAGE_SIZE);
2535
2536 skb_frag_size_set(frag, size);
2537 skb->data_len += size;
2538 skb->truesize += PAGE_SIZE;
2539 skb->len += size;
2540 length -= size;
2541 }
2542 }
2543 }
2544
2545 /* Normal packet - take skb from ring element and put in a new one */
2546 static struct sk_buff *receive_new(struct sky2_port *sky2,
2547 struct rx_ring_info *re,
2548 unsigned int length)
2549 {
2550 struct sk_buff *skb;
2551 struct rx_ring_info nre;
2552 unsigned hdr_space = sky2->rx_data_size;
2553
2554 nre.skb = sky2_rx_alloc(sky2, GFP_ATOMIC);
2555 if (unlikely(!nre.skb))
2556 goto nobuf;
2557
2558 if (sky2_rx_map_skb(sky2->hw->pdev, &nre, hdr_space))
2559 goto nomap;
2560
2561 skb = re->skb;
2562 sky2_rx_unmap_skb(sky2->hw->pdev, re);
2563 prefetch(skb->data);
2564 *re = nre;
2565
2566 if (skb_shinfo(skb)->nr_frags)
2567 skb_put_frags(skb, hdr_space, length);
2568 else
2569 skb_put(skb, length);
2570 return skb;
2571
2572 nomap:
2573 dev_kfree_skb(nre.skb);
2574 nobuf:
2575 return NULL;
2576 }
2577
2578 /*
2579 * Receive one packet.
2580 * For larger packets, get new buffer.
2581 */
2582 static struct sk_buff *sky2_receive(struct net_device *dev,
2583 u16 length, u32 status)
2584 {
2585 struct sky2_port *sky2 = netdev_priv(dev);
2586 struct rx_ring_info *re = sky2->rx_ring + sky2->rx_next;
2587 struct sk_buff *skb = NULL;
2588 u16 count = (status & GMR_FS_LEN) >> 16;
2589
2590 netif_printk(sky2, rx_status, KERN_DEBUG, dev,
2591 "rx slot %u status 0x%x len %d\n",
2592 sky2->rx_next, status, length);
2593
2594 sky2->rx_next = (sky2->rx_next + 1) % sky2->rx_pending;
2595 prefetch(sky2->rx_ring + sky2->rx_next);
2596
2597 if (skb_vlan_tag_present(re->skb))
2598 count -= VLAN_HLEN; /* Account for vlan tag */
2599
2600 /* This chip has hardware problems that generates bogus status.
2601 * So do only marginal checking and expect higher level protocols
2602 * to handle crap frames.
2603 */
2604 if (sky2->hw->chip_id == CHIP_ID_YUKON_FE_P &&
2605 sky2->hw->chip_rev == CHIP_REV_YU_FE2_A0 &&
2606 length != count)
2607 goto okay;
2608
2609 if (status & GMR_FS_ANY_ERR)
2610 goto error;
2611
2612 if (!(status & GMR_FS_RX_OK))
2613 goto resubmit;
2614
2615 /* if length reported by DMA does not match PHY, packet was truncated */
2616 if (length != count)
2617 goto error;
2618
2619 okay:
2620 if (needs_copy(re, length))
2621 skb = receive_copy(sky2, re, length);
2622 else
2623 skb = receive_new(sky2, re, length);
2624
2625 dev->stats.rx_dropped += (skb == NULL);
2626
2627 resubmit:
2628 sky2_rx_submit(sky2, re);
2629
2630 return skb;
2631
2632 error:
2633 ++dev->stats.rx_errors;
2634
2635 if (net_ratelimit())
2636 netif_info(sky2, rx_err, dev,
2637 "rx error, status 0x%x length %d\n", status, length);
2638
2639 goto resubmit;
2640 }
2641
2642 /* Transmit complete */
2643 static inline void sky2_tx_done(struct net_device *dev, u16 last)
2644 {
2645 struct sky2_port *sky2 = netdev_priv(dev);
2646
2647 if (netif_running(dev)) {
2648 sky2_tx_complete(sky2, last);
2649
2650 /* Wake unless it's detached, and called e.g. from sky2_close() */
2651 if (tx_avail(sky2) > MAX_SKB_TX_LE + 4)
2652 netif_wake_queue(dev);
2653 }
2654 }
2655
2656 static inline void sky2_skb_rx(const struct sky2_port *sky2,
2657 struct sk_buff *skb)
2658 {
2659 if (skb->ip_summed == CHECKSUM_NONE)
2660 netif_receive_skb(skb);
2661 else
2662 napi_gro_receive(&sky2->hw->napi, skb);
2663 }
2664
2665 static inline void sky2_rx_done(struct sky2_hw *hw, unsigned port,
2666 unsigned packets, unsigned bytes)
2667 {
2668 struct net_device *dev = hw->dev[port];
2669 struct sky2_port *sky2 = netdev_priv(dev);
2670
2671 if (packets == 0)
2672 return;
2673
2674 u64_stats_update_begin(&sky2->rx_stats.syncp);
2675 sky2->rx_stats.packets += packets;
2676 sky2->rx_stats.bytes += bytes;
2677 u64_stats_update_end(&sky2->rx_stats.syncp);
2678
2679 dev->last_rx = jiffies;
2680 sky2_rx_update(netdev_priv(dev), rxqaddr[port]);
2681 }
2682
2683 static void sky2_rx_checksum(struct sky2_port *sky2, u32 status)
2684 {
2685 /* If this happens then driver assuming wrong format for chip type */
2686 BUG_ON(sky2->hw->flags & SKY2_HW_NEW_LE);
2687
2688 /* Both checksum counters are programmed to start at
2689 * the same offset, so unless there is a problem they
2690 * should match. This failure is an early indication that
2691 * hardware receive checksumming won't work.
2692 */
2693 if (likely((u16)(status >> 16) == (u16)status)) {
2694 struct sk_buff *skb = sky2->rx_ring[sky2->rx_next].skb;
2695 skb->ip_summed = CHECKSUM_COMPLETE;
2696 skb->csum = le16_to_cpu(status);
2697 } else {
2698 dev_notice(&sky2->hw->pdev->dev,
2699 "%s: receive checksum problem (status = %#x)\n",
2700 sky2->netdev->name, status);
2701
2702 /* Disable checksum offload
2703 * It will be reenabled on next ndo_set_features, but if it's
2704 * really broken, will get disabled again
2705 */
2706 sky2->netdev->features &= ~NETIF_F_RXCSUM;
2707 sky2_write32(sky2->hw, Q_ADDR(rxqaddr[sky2->port], Q_CSR),
2708 BMU_DIS_RX_CHKSUM);
2709 }
2710 }
2711
2712 static void sky2_rx_tag(struct sky2_port *sky2, u16 length)
2713 {
2714 struct sk_buff *skb;
2715
2716 skb = sky2->rx_ring[sky2->rx_next].skb;
2717 __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), be16_to_cpu(length));
2718 }
2719
2720 static void sky2_rx_hash(struct sky2_port *sky2, u32 status)
2721 {
2722 struct sk_buff *skb;
2723
2724 skb = sky2->rx_ring[sky2->rx_next].skb;
2725 skb_set_hash(skb, le32_to_cpu(status), PKT_HASH_TYPE_L3);
2726 }
2727
2728 /* Process status response ring */
2729 static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx)
2730 {
2731 int work_done = 0;
2732 unsigned int total_bytes[2] = { 0 };
2733 unsigned int total_packets[2] = { 0 };
2734
2735 if (to_do <= 0)
2736 return work_done;
2737
2738 rmb();
2739 do {
2740 struct sky2_port *sky2;
2741 struct sky2_status_le *le = hw->st_le + hw->st_idx;
2742 unsigned port;
2743 struct net_device *dev;
2744 struct sk_buff *skb;
2745 u32 status;
2746 u16 length;
2747 u8 opcode = le->opcode;
2748
2749 if (!(opcode & HW_OWNER))
2750 break;
2751
2752 hw->st_idx = RING_NEXT(hw->st_idx, hw->st_size);
2753
2754 port = le->css & CSS_LINK_BIT;
2755 dev = hw->dev[port];
2756 sky2 = netdev_priv(dev);
2757 length = le16_to_cpu(le->length);
2758 status = le32_to_cpu(le->status);
2759
2760 le->opcode = 0;
2761 switch (opcode & ~HW_OWNER) {
2762 case OP_RXSTAT:
2763 total_packets[port]++;
2764 total_bytes[port] += length;
2765
2766 skb = sky2_receive(dev, length, status);
2767 if (!skb)
2768 break;
2769
2770 /* This chip reports checksum status differently */
2771 if (hw->flags & SKY2_HW_NEW_LE) {
2772 if ((dev->features & NETIF_F_RXCSUM) &&
2773 (le->css & (CSS_ISIPV4 | CSS_ISIPV6)) &&
2774 (le->css & CSS_TCPUDPCSOK))
2775 skb->ip_summed = CHECKSUM_UNNECESSARY;
2776 else
2777 skb->ip_summed = CHECKSUM_NONE;
2778 }
2779
2780 skb->protocol = eth_type_trans(skb, dev);
2781 sky2_skb_rx(sky2, skb);
2782
2783 /* Stop after net poll weight */
2784 if (++work_done >= to_do)
2785 goto exit_loop;
2786 break;
2787
2788 case OP_RXVLAN:
2789 sky2_rx_tag(sky2, length);
2790 break;
2791
2792 case OP_RXCHKSVLAN:
2793 sky2_rx_tag(sky2, length);
2794 /* fall through */
2795 case OP_RXCHKS:
2796 if (likely(dev->features & NETIF_F_RXCSUM))
2797 sky2_rx_checksum(sky2, status);
2798 break;
2799
2800 case OP_RSS_HASH:
2801 sky2_rx_hash(sky2, status);
2802 break;
2803
2804 case OP_TXINDEXLE:
2805 /* TX index reports status for both ports */
2806 sky2_tx_done(hw->dev[0], status & 0xfff);
2807 if (hw->dev[1])
2808 sky2_tx_done(hw->dev[1],
2809 ((status >> 24) & 0xff)
2810 | (u16)(length & 0xf) << 8);
2811 break;
2812
2813 default:
2814 if (net_ratelimit())
2815 pr_warn("unknown status opcode 0x%x\n", opcode);
2816 }
2817 } while (hw->st_idx != idx);
2818
2819 /* Fully processed status ring so clear irq */
2820 sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ);
2821
2822 exit_loop:
2823 sky2_rx_done(hw, 0, total_packets[0], total_bytes[0]);
2824 sky2_rx_done(hw, 1, total_packets[1], total_bytes[1]);
2825
2826 return work_done;
2827 }
2828
2829 static void sky2_hw_error(struct sky2_hw *hw, unsigned port, u32 status)
2830 {
2831 struct net_device *dev = hw->dev[port];
2832
2833 if (net_ratelimit())
2834 netdev_info(dev, "hw error interrupt status 0x%x\n", status);
2835
2836 if (status & Y2_IS_PAR_RD1) {
2837 if (net_ratelimit())
2838 netdev_err(dev, "ram data read parity error\n");
2839 /* Clear IRQ */
2840 sky2_write16(hw, RAM_BUFFER(port, B3_RI_CTRL), RI_CLR_RD_PERR);
2841 }
2842
2843 if (status & Y2_IS_PAR_WR1) {
2844 if (net_ratelimit())
2845 netdev_err(dev, "ram data write parity error\n");
2846
2847 sky2_write16(hw, RAM_BUFFER(port, B3_RI_CTRL), RI_CLR_WR_PERR);
2848 }
2849
2850 if (status & Y2_IS_PAR_MAC1) {
2851 if (net_ratelimit())
2852 netdev_err(dev, "MAC parity error\n");
2853 sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_CLI_TX_PE);
2854 }
2855
2856 if (status & Y2_IS_PAR_RX1) {
2857 if (net_ratelimit())
2858 netdev_err(dev, "RX parity error\n");
2859 sky2_write32(hw, Q_ADDR(rxqaddr[port], Q_CSR), BMU_CLR_IRQ_PAR);
2860 }
2861
2862 if (status & Y2_IS_TCP_TXA1) {
2863 if (net_ratelimit())
2864 netdev_err(dev, "TCP segmentation error\n");
2865 sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), BMU_CLR_IRQ_TCP);
2866 }
2867 }
2868
2869 static void sky2_hw_intr(struct sky2_hw *hw)
2870 {
2871 struct pci_dev *pdev = hw->pdev;
2872 u32 status = sky2_read32(hw, B0_HWE_ISRC);
2873 u32 hwmsk = sky2_read32(hw, B0_HWE_IMSK);
2874
2875 status &= hwmsk;
2876
2877 if (status & Y2_IS_TIST_OV)
2878 sky2_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_CLR_IRQ);
2879
2880 if (status & (Y2_IS_MST_ERR | Y2_IS_IRQ_STAT)) {
2881 u16 pci_err;
2882
2883 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
2884 pci_err = sky2_pci_read16(hw, PCI_STATUS);
2885 if (net_ratelimit())
2886 dev_err(&pdev->dev, "PCI hardware error (0x%x)\n",
2887 pci_err);
2888
2889 sky2_pci_write16(hw, PCI_STATUS,
2890 pci_err | PCI_STATUS_ERROR_BITS);
2891 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
2892 }
2893
2894 if (status & Y2_IS_PCI_EXP) {
2895 /* PCI-Express uncorrectable Error occurred */
2896 u32 err;
2897
2898 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
2899 err = sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS);
2900 sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS,
2901 0xfffffffful);
2902 if (net_ratelimit())
2903 dev_err(&pdev->dev, "PCI Express error (0x%x)\n", err);
2904
2905 sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS);
2906 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
2907 }
2908
2909 if (status & Y2_HWE_L1_MASK)
2910 sky2_hw_error(hw, 0, status);
2911 status >>= 8;
2912 if (status & Y2_HWE_L1_MASK)
2913 sky2_hw_error(hw, 1, status);
2914 }
2915
2916 static void sky2_mac_intr(struct sky2_hw *hw, unsigned port)
2917 {
2918 struct net_device *dev = hw->dev[port];
2919 struct sky2_port *sky2 = netdev_priv(dev);
2920 u8 status = sky2_read8(hw, SK_REG(port, GMAC_IRQ_SRC));
2921
2922 netif_info(sky2, intr, dev, "mac interrupt status 0x%x\n", status);
2923
2924 if (status & GM_IS_RX_CO_OV)
2925 gma_read16(hw, port, GM_RX_IRQ_SRC);
2926
2927 if (status & GM_IS_TX_CO_OV)
2928 gma_read16(hw, port, GM_TX_IRQ_SRC);
2929
2930 if (status & GM_IS_RX_FF_OR) {
2931 ++dev->stats.rx_fifo_errors;
2932 sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_CLI_RX_FO);
2933 }
2934
2935 if (status & GM_IS_TX_FF_UR) {
2936 ++dev->stats.tx_fifo_errors;
2937 sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_CLI_TX_FU);
2938 }
2939 }
2940
2941 /* This should never happen it is a bug. */
2942 static void sky2_le_error(struct sky2_hw *hw, unsigned port, u16 q)
2943 {
2944 struct net_device *dev = hw->dev[port];
2945 u16 idx = sky2_read16(hw, Y2_QADDR(q, PREF_UNIT_GET_IDX));
2946
2947 dev_err(&hw->pdev->dev, "%s: descriptor error q=%#x get=%u put=%u\n",
2948 dev->name, (unsigned) q, (unsigned) idx,
2949 (unsigned) sky2_read16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX)));
2950
2951 sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_CLR_IRQ_CHK);
2952 }
2953
2954 static int sky2_rx_hung(struct net_device *dev)
2955 {
2956 struct sky2_port *sky2 = netdev_priv(dev);
2957 struct sky2_hw *hw = sky2->hw;
2958 unsigned port = sky2->port;
2959 unsigned rxq = rxqaddr[port];
2960 u32 mac_rp = sky2_read32(hw, SK_REG(port, RX_GMF_RP));
2961 u8 mac_lev = sky2_read8(hw, SK_REG(port, RX_GMF_RLEV));
2962 u8 fifo_rp = sky2_read8(hw, Q_ADDR(rxq, Q_RP));
2963 u8 fifo_lev = sky2_read8(hw, Q_ADDR(rxq, Q_RL));
2964
2965 /* If idle and MAC or PCI is stuck */
2966 if (sky2->check.last == dev->last_rx &&
2967 ((mac_rp == sky2->check.mac_rp &&
2968 mac_lev != 0 && mac_lev >= sky2->check.mac_lev) ||
2969 /* Check if the PCI RX hang */
2970 (fifo_rp == sky2->check.fifo_rp &&
2971 fifo_lev != 0 && fifo_lev >= sky2->check.fifo_lev))) {
2972 netdev_printk(KERN_DEBUG, dev,
2973 "hung mac %d:%d fifo %d (%d:%d)\n",
2974 mac_lev, mac_rp, fifo_lev,
2975 fifo_rp, sky2_read8(hw, Q_ADDR(rxq, Q_WP)));
2976 return 1;
2977 } else {
2978 sky2->check.last = dev->last_rx;
2979 sky2->check.mac_rp = mac_rp;
2980 sky2->check.mac_lev = mac_lev;
2981 sky2->check.fifo_rp = fifo_rp;
2982 sky2->check.fifo_lev = fifo_lev;
2983 return 0;
2984 }
2985 }
2986
2987 static void sky2_watchdog(unsigned long arg)
2988 {
2989 struct sky2_hw *hw = (struct sky2_hw *) arg;
2990
2991 /* Check for lost IRQ once a second */
2992 if (sky2_read32(hw, B0_ISRC)) {
2993 napi_schedule(&hw->napi);
2994 } else {
2995 int i, active = 0;
2996
2997 for (i = 0; i < hw->ports; i++) {
2998 struct net_device *dev = hw->dev[i];
2999 if (!netif_running(dev))
3000 continue;
3001 ++active;
3002
3003 /* For chips with Rx FIFO, check if stuck */
3004 if ((hw->flags & SKY2_HW_RAM_BUFFER) &&
3005 sky2_rx_hung(dev)) {
3006 netdev_info(dev, "receiver hang detected\n");
3007 schedule_work(&hw->restart_work);
3008 return;
3009 }
3010 }
3011
3012 if (active == 0)
3013 return;
3014 }
3015
3016 mod_timer(&hw->watchdog_timer, round_jiffies(jiffies + HZ));
3017 }
3018
3019 /* Hardware/software error handling */
3020 static void sky2_err_intr(struct sky2_hw *hw, u32 status)
3021 {
3022 if (net_ratelimit())
3023 dev_warn(&hw->pdev->dev, "error interrupt status=%#x\n", status);
3024
3025 if (status & Y2_IS_HW_ERR)
3026 sky2_hw_intr(hw);
3027
3028 if (status & Y2_IS_IRQ_MAC1)
3029 sky2_mac_intr(hw, 0);
3030
3031 if (status & Y2_IS_IRQ_MAC2)
3032 sky2_mac_intr(hw, 1);
3033
3034 if (status & Y2_IS_CHK_RX1)
3035 sky2_le_error(hw, 0, Q_R1);
3036
3037 if (status & Y2_IS_CHK_RX2)
3038 sky2_le_error(hw, 1, Q_R2);
3039
3040 if (status & Y2_IS_CHK_TXA1)
3041 sky2_le_error(hw, 0, Q_XA1);
3042
3043 if (status & Y2_IS_CHK_TXA2)
3044 sky2_le_error(hw, 1, Q_XA2);
3045 }
3046
3047 static int sky2_poll(struct napi_struct *napi, int work_limit)
3048 {
3049 struct sky2_hw *hw = container_of(napi, struct sky2_hw, napi);
3050 u32 status = sky2_read32(hw, B0_Y2_SP_EISR);
3051 int work_done = 0;
3052 u16 idx;
3053
3054 if (unlikely(status & Y2_IS_ERROR))
3055 sky2_err_intr(hw, status);
3056
3057 if (status & Y2_IS_IRQ_PHY1)
3058 sky2_phy_intr(hw, 0);
3059
3060 if (status & Y2_IS_IRQ_PHY2)
3061 sky2_phy_intr(hw, 1);
3062
3063 if (status & Y2_IS_PHY_QLNK)
3064 sky2_qlink_intr(hw);
3065
3066 while ((idx = sky2_read16(hw, STAT_PUT_IDX)) != hw->st_idx) {
3067 work_done += sky2_status_intr(hw, work_limit - work_done, idx);
3068
3069 if (work_done >= work_limit)
3070 goto done;
3071 }
3072
3073 napi_complete_done(napi, work_done);
3074 sky2_read32(hw, B0_Y2_SP_LISR);
3075 done:
3076
3077 return work_done;
3078 }
3079
3080 static irqreturn_t sky2_intr(int irq, void *dev_id)
3081 {
3082 struct sky2_hw *hw = dev_id;
3083 u32 status;
3084
3085 /* Reading this mask interrupts as side effect */
3086 status = sky2_read32(hw, B0_Y2_SP_ISRC2);
3087 if (status == 0 || status == ~0) {
3088 sky2_write32(hw, B0_Y2_SP_ICR, 2);
3089 return IRQ_NONE;
3090 }
3091
3092 prefetch(&hw->st_le[hw->st_idx]);
3093
3094 napi_schedule(&hw->napi);
3095
3096 return IRQ_HANDLED;
3097 }
3098
3099 #ifdef CONFIG_NET_POLL_CONTROLLER
3100 static void sky2_netpoll(struct net_device *dev)
3101 {
3102 struct sky2_port *sky2 = netdev_priv(dev);
3103
3104 napi_schedule(&sky2->hw->napi);
3105 }
3106 #endif
3107
3108 /* Chip internal frequency for clock calculations */
3109 static u32 sky2_mhz(const struct sky2_hw *hw)
3110 {
3111 switch (hw->chip_id) {
3112 case CHIP_ID_YUKON_EC:
3113 case CHIP_ID_YUKON_EC_U:
3114 case CHIP_ID_YUKON_EX:
3115 case CHIP_ID_YUKON_SUPR:
3116 case CHIP_ID_YUKON_UL_2:
3117 case CHIP_ID_YUKON_OPT:
3118 case CHIP_ID_YUKON_PRM:
3119 case CHIP_ID_YUKON_OP_2:
3120 return 125;
3121
3122 case CHIP_ID_YUKON_FE:
3123 return 100;
3124
3125 case CHIP_ID_YUKON_FE_P:
3126 return 50;
3127
3128 case CHIP_ID_YUKON_XL:
3129 return 156;
3130
3131 default:
3132 BUG();
3133 }
3134 }
3135
3136 static inline u32 sky2_us2clk(const struct sky2_hw *hw, u32 us)
3137 {
3138 return sky2_mhz(hw) * us;
3139 }
3140
3141 static inline u32 sky2_clk2us(const struct sky2_hw *hw, u32 clk)
3142 {
3143 return clk / sky2_mhz(hw);
3144 }
3145
3146
3147 static int sky2_init(struct sky2_hw *hw)
3148 {
3149 u8 t8;
3150
3151 /* Enable all clocks and check for bad PCI access */
3152 sky2_pci_write32(hw, PCI_DEV_REG3, 0);
3153
3154 sky2_write8(hw, B0_CTST, CS_RST_CLR);
3155
3156 hw->chip_id = sky2_read8(hw, B2_CHIP_ID);
3157 hw->chip_rev = (sky2_read8(hw, B2_MAC_CFG) & CFG_CHIP_R_MSK) >> 4;
3158
3159 switch (hw->chip_id) {
3160 case CHIP_ID_YUKON_XL:
3161 hw->flags = SKY2_HW_GIGABIT | SKY2_HW_NEWER_PHY;
3162 if (hw->chip_rev < CHIP_REV_YU_XL_A2)
3163 hw->flags |= SKY2_HW_RSS_BROKEN;
3164 break;
3165
3166 case CHIP_ID_YUKON_EC_U:
3167 hw->flags = SKY2_HW_GIGABIT
3168 | SKY2_HW_NEWER_PHY
3169 | SKY2_HW_ADV_POWER_CTL;
3170 break;
3171
3172 case CHIP_ID_YUKON_EX:
3173 hw->flags = SKY2_HW_GIGABIT
3174 | SKY2_HW_NEWER_PHY
3175 | SKY2_HW_NEW_LE
3176 | SKY2_HW_ADV_POWER_CTL
3177 | SKY2_HW_RSS_CHKSUM;
3178
3179 /* New transmit checksum */
3180 if (hw->chip_rev != CHIP_REV_YU_EX_B0)
3181 hw->flags |= SKY2_HW_AUTO_TX_SUM;
3182 break;
3183
3184 case CHIP_ID_YUKON_EC:
3185 /* This rev is really old, and requires untested workarounds */
3186 if (hw->chip_rev == CHIP_REV_YU_EC_A1) {
3187 dev_err(&hw->pdev->dev, "unsupported revision Yukon-EC rev A1\n");
3188 return -EOPNOTSUPP;
3189 }
3190 hw->flags = SKY2_HW_GIGABIT | SKY2_HW_RSS_BROKEN;
3191 break;
3192
3193 case CHIP_ID_YUKON_FE:
3194 hw->flags = SKY2_HW_RSS_BROKEN;
3195 break;
3196
3197 case CHIP_ID_YUKON_FE_P:
3198 hw->flags = SKY2_HW_NEWER_PHY
3199 | SKY2_HW_NEW_LE
3200 | SKY2_HW_AUTO_TX_SUM
3201 | SKY2_HW_ADV_POWER_CTL;
3202
3203 /* The workaround for status conflicts VLAN tag detection. */
3204 if (hw->chip_rev == CHIP_REV_YU_FE2_A0)
3205 hw->flags |= SKY2_HW_VLAN_BROKEN | SKY2_HW_RSS_CHKSUM;
3206 break;
3207
3208 case CHIP_ID_YUKON_SUPR:
3209 hw->flags = SKY2_HW_GIGABIT
3210 | SKY2_HW_NEWER_PHY
3211 | SKY2_HW_NEW_LE
3212 | SKY2_HW_AUTO_TX_SUM
3213 | SKY2_HW_ADV_POWER_CTL;
3214
3215 if (hw->chip_rev == CHIP_REV_YU_SU_A0)
3216 hw->flags |= SKY2_HW_RSS_CHKSUM;
3217 break;
3218
3219 case CHIP_ID_YUKON_UL_2:
3220 hw->flags = SKY2_HW_GIGABIT
3221 | SKY2_HW_ADV_POWER_CTL;
3222 break;
3223
3224 case CHIP_ID_YUKON_OPT:
3225 case CHIP_ID_YUKON_PRM:
3226 case CHIP_ID_YUKON_OP_2:
3227 hw->flags = SKY2_HW_GIGABIT
3228 | SKY2_HW_NEW_LE
3229 | SKY2_HW_ADV_POWER_CTL;
3230 break;
3231
3232 default:
3233 dev_err(&hw->pdev->dev, "unsupported chip type 0x%x\n",
3234 hw->chip_id);
3235 return -EOPNOTSUPP;
3236 }
3237
3238 hw->pmd_type = sky2_read8(hw, B2_PMD_TYP);
3239 if (hw->pmd_type == 'L' || hw->pmd_type == 'S' || hw->pmd_type == 'P')
3240 hw->flags |= SKY2_HW_FIBRE_PHY;
3241
3242 hw->ports = 1;
3243 t8 = sky2_read8(hw, B2_Y2_HW_RES);
3244 if ((t8 & CFG_DUAL_MAC_MSK) == CFG_DUAL_MAC_MSK) {
3245 if (!(sky2_read8(hw, B2_Y2_CLK_GATE) & Y2_STATUS_LNK2_INAC))
3246 ++hw->ports;
3247 }
3248
3249 if (sky2_read8(hw, B2_E_0))
3250 hw->flags |= SKY2_HW_RAM_BUFFER;
3251
3252 return 0;
3253 }
3254
3255 static void sky2_reset(struct sky2_hw *hw)
3256 {
3257 struct pci_dev *pdev = hw->pdev;
3258 u16 status;
3259 int i;
3260 u32 hwe_mask = Y2_HWE_ALL_MASK;
3261
3262 /* disable ASF */
3263 if (hw->chip_id == CHIP_ID_YUKON_EX
3264 || hw->chip_id == CHIP_ID_YUKON_SUPR) {
3265 sky2_write32(hw, CPU_WDOG, 0);
3266 status = sky2_read16(hw, HCU_CCSR);
3267 status &= ~(HCU_CCSR_AHB_RST | HCU_CCSR_CPU_RST_MODE |
3268 HCU_CCSR_UC_STATE_MSK);
3269 /*
3270 * CPU clock divider shouldn't be used because
3271 * - ASF firmware may malfunction
3272 * - Yukon-Supreme: Parallel FLASH doesn't support divided clocks
3273 */
3274 status &= ~HCU_CCSR_CPU_CLK_DIVIDE_MSK;
3275 sky2_write16(hw, HCU_CCSR, status);
3276 sky2_write32(hw, CPU_WDOG, 0);
3277 } else
3278 sky2_write8(hw, B28_Y2_ASF_STAT_CMD, Y2_ASF_RESET);
3279 sky2_write16(hw, B0_CTST, Y2_ASF_DISABLE);
3280
3281 /* do a SW reset */
3282 sky2_write8(hw, B0_CTST, CS_RST_SET);
3283 sky2_write8(hw, B0_CTST, CS_RST_CLR);
3284
3285 /* allow writes to PCI config */
3286 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
3287
3288 /* clear PCI errors, if any */
3289 status = sky2_pci_read16(hw, PCI_STATUS);
3290 status |= PCI_STATUS_ERROR_BITS;
3291 sky2_pci_write16(hw, PCI_STATUS, status);
3292
3293 sky2_write8(hw, B0_CTST, CS_MRST_CLR);
3294
3295 if (pci_is_pcie(pdev)) {
3296 sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS,
3297 0xfffffffful);
3298
3299 /* If error bit is stuck on ignore it */
3300 if (sky2_read32(hw, B0_HWE_ISRC) & Y2_IS_PCI_EXP)
3301 dev_info(&pdev->dev, "ignoring stuck error report bit\n");
3302 else
3303 hwe_mask |= Y2_IS_PCI_EXP;
3304 }
3305
3306 sky2_power_on(hw);
3307 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
3308
3309 for (i = 0; i < hw->ports; i++) {
3310 sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_SET);
3311 sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_CLR);
3312
3313 if (hw->chip_id == CHIP_ID_YUKON_EX ||
3314 hw->chip_id == CHIP_ID_YUKON_SUPR)
3315 sky2_write16(hw, SK_REG(i, GMAC_CTRL),
3316 GMC_BYP_MACSECRX_ON | GMC_BYP_MACSECTX_ON
3317 | GMC_BYP_RETR_ON);
3318
3319 }
3320
3321 if (hw->chip_id == CHIP_ID_YUKON_SUPR && hw->chip_rev > CHIP_REV_YU_SU_B0) {
3322 /* enable MACSec clock gating */
3323 sky2_pci_write32(hw, PCI_DEV_REG3, P_CLK_MACSEC_DIS);
3324 }
3325
3326 if (hw->chip_id == CHIP_ID_YUKON_OPT ||
3327 hw->chip_id == CHIP_ID_YUKON_PRM ||
3328 hw->chip_id == CHIP_ID_YUKON_OP_2) {
3329 u16 reg;
3330
3331 if (hw->chip_id == CHIP_ID_YUKON_OPT && hw->chip_rev == 0) {
3332 /* disable PCI-E PHY power down (set PHY reg 0x80, bit 7 */
3333 sky2_write32(hw, Y2_PEX_PHY_DATA, (0x80UL << 16) | (1 << 7));
3334
3335 /* set PHY Link Detect Timer to 1.1 second (11x 100ms) */
3336 reg = 10;
3337
3338 /* re-enable PEX PM in PEX PHY debug reg. 8 (clear bit 12) */
3339 sky2_write32(hw, Y2_PEX_PHY_DATA, PEX_DB_ACCESS | (0x08UL << 16));
3340 } else {
3341 /* set PHY Link Detect Timer to 0.4 second (4x 100ms) */
3342 reg = 3;
3343 }
3344
3345 reg <<= PSM_CONFIG_REG4_TIMER_PHY_LINK_DETECT_BASE;
3346 reg |= PSM_CONFIG_REG4_RST_PHY_LINK_DETECT;
3347
3348 /* reset PHY Link Detect */
3349 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
3350 sky2_pci_write16(hw, PSM_CONFIG_REG4, reg);
3351
3352 /* check if PSMv2 was running before */
3353 reg = sky2_pci_read16(hw, PSM_CONFIG_REG3);
3354 if (reg & PCI_EXP_LNKCTL_ASPMC)
3355 /* restore the PCIe Link Control register */
3356 sky2_pci_write16(hw, pdev->pcie_cap + PCI_EXP_LNKCTL,
3357 reg);
3358
3359 if (hw->chip_id == CHIP_ID_YUKON_PRM &&
3360 hw->chip_rev == CHIP_REV_YU_PRM_A0) {
3361 /* change PHY Interrupt polarity to low active */
3362 reg = sky2_read16(hw, GPHY_CTRL);
3363 sky2_write16(hw, GPHY_CTRL, reg | GPC_INTPOL);
3364
3365 /* adapt HW for low active PHY Interrupt */
3366 reg = sky2_read16(hw, Y2_CFG_SPC + PCI_LDO_CTRL);
3367 sky2_write16(hw, Y2_CFG_SPC + PCI_LDO_CTRL, reg | PHY_M_UNDOC1);
3368 }
3369
3370 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
3371
3372 /* re-enable PEX PM in PEX PHY debug reg. 8 (clear bit 12) */
3373 sky2_write32(hw, Y2_PEX_PHY_DATA, PEX_DB_ACCESS | (0x08UL << 16));
3374 }
3375
3376 /* Clear I2C IRQ noise */
3377 sky2_write32(hw, B2_I2C_IRQ, 1);
3378
3379 /* turn off hardware timer (unused) */
3380 sky2_write8(hw, B2_TI_CTRL, TIM_STOP);
3381 sky2_write8(hw, B2_TI_CTRL, TIM_CLR_IRQ);
3382
3383 /* Turn off descriptor polling */
3384 sky2_write32(hw, B28_DPT_CTRL, DPT_STOP);
3385
3386 /* Turn off receive timestamp */
3387 sky2_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_STOP);
3388 sky2_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_CLR_IRQ);
3389
3390 /* enable the Tx Arbiters */
3391 for (i = 0; i < hw->ports; i++)
3392 sky2_write8(hw, SK_REG(i, TXA_CTRL), TXA_ENA_ARB);
3393
3394 /* Initialize ram interface */
3395 for (i = 0; i < hw->ports; i++) {
3396 sky2_write8(hw, RAM_BUFFER(i, B3_RI_CTRL), RI_RST_CLR);
3397
3398 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_R1), SK_RI_TO_53);
3399 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XA1), SK_RI_TO_53);
3400 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XS1), SK_RI_TO_53);
3401 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_R1), SK_RI_TO_53);
3402 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XA1), SK_RI_TO_53);
3403 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XS1), SK_RI_TO_53);
3404 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_R2), SK_RI_TO_53);
3405 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XA2), SK_RI_TO_53);
3406 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XS2), SK_RI_TO_53);
3407 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_R2), SK_RI_TO_53);
3408 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XA2), SK_RI_TO_53);
3409 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XS2), SK_RI_TO_53);
3410 }
3411
3412 sky2_write32(hw, B0_HWE_IMSK, hwe_mask);
3413
3414 for (i = 0; i < hw->ports; i++)
3415 sky2_gmac_reset(hw, i);
3416
3417 memset(hw->st_le, 0, hw->st_size * sizeof(struct sky2_status_le));
3418 hw->st_idx = 0;
3419
3420 sky2_write32(hw, STAT_CTRL, SC_STAT_RST_SET);
3421 sky2_write32(hw, STAT_CTRL, SC_STAT_RST_CLR);
3422
3423 sky2_write32(hw, STAT_LIST_ADDR_LO, hw->st_dma);
3424 sky2_write32(hw, STAT_LIST_ADDR_HI, (u64) hw->st_dma >> 32);
3425
3426 /* Set the list last index */
3427 sky2_write16(hw, STAT_LAST_IDX, hw->st_size - 1);
3428
3429 sky2_write16(hw, STAT_TX_IDX_TH, 10);
3430 sky2_write8(hw, STAT_FIFO_WM, 16);
3431
3432 /* set Status-FIFO ISR watermark */
3433 if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev == 0)
3434 sky2_write8(hw, STAT_FIFO_ISR_WM, 4);
3435 else
3436 sky2_write8(hw, STAT_FIFO_ISR_WM, 16);
3437
3438 sky2_write32(hw, STAT_TX_TIMER_INI, sky2_us2clk(hw, 1000));
3439 sky2_write32(hw, STAT_ISR_TIMER_INI, sky2_us2clk(hw, 20));
3440 sky2_write32(hw, STAT_LEV_TIMER_INI, sky2_us2clk(hw, 100));
3441
3442 /* enable status unit */
3443 sky2_write32(hw, STAT_CTRL, SC_STAT_OP_ON);
3444
3445 sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
3446 sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_START);
3447 sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_START);
3448 }
3449
3450 /* Take device down (offline).
3451 * Equivalent to doing dev_stop() but this does not
3452 * inform upper layers of the transition.
3453 */
3454 static void sky2_detach(struct net_device *dev)
3455 {
3456 if (netif_running(dev)) {
3457 netif_tx_lock(dev);
3458 netif_device_detach(dev); /* stop txq */
3459 netif_tx_unlock(dev);
3460 sky2_close(dev);
3461 }
3462 }
3463
3464 /* Bring device back after doing sky2_detach */
3465 static int sky2_reattach(struct net_device *dev)
3466 {
3467 int err = 0;
3468
3469 if (netif_running(dev)) {
3470 err = sky2_open(dev);
3471 if (err) {
3472 netdev_info(dev, "could not restart %d\n", err);
3473 dev_close(dev);
3474 } else {
3475 netif_device_attach(dev);
3476 sky2_set_multicast(dev);
3477 }
3478 }
3479
3480 return err;
3481 }
3482
3483 static void sky2_all_down(struct sky2_hw *hw)
3484 {
3485 int i;
3486
3487 if (hw->flags & SKY2_HW_IRQ_SETUP) {
3488 sky2_write32(hw, B0_IMSK, 0);
3489 sky2_read32(hw, B0_IMSK);
3490
3491 synchronize_irq(hw->pdev->irq);
3492 napi_disable(&hw->napi);
3493 }
3494
3495 for (i = 0; i < hw->ports; i++) {
3496 struct net_device *dev = hw->dev[i];
3497 struct sky2_port *sky2 = netdev_priv(dev);
3498
3499 if (!netif_running(dev))
3500 continue;
3501
3502 netif_carrier_off(dev);
3503 netif_tx_disable(dev);
3504 sky2_hw_down(sky2);
3505 }
3506 }
3507
3508 static void sky2_all_up(struct sky2_hw *hw)
3509 {
3510 u32 imask = Y2_IS_BASE;
3511 int i;
3512
3513 for (i = 0; i < hw->ports; i++) {
3514 struct net_device *dev = hw->dev[i];
3515 struct sky2_port *sky2 = netdev_priv(dev);
3516
3517 if (!netif_running(dev))
3518 continue;
3519
3520 sky2_hw_up(sky2);
3521 sky2_set_multicast(dev);
3522 imask |= portirq_msk[i];
3523 netif_wake_queue(dev);
3524 }
3525
3526 if (hw->flags & SKY2_HW_IRQ_SETUP) {
3527 sky2_write32(hw, B0_IMSK, imask);
3528 sky2_read32(hw, B0_IMSK);
3529 sky2_read32(hw, B0_Y2_SP_LISR);
3530 napi_enable(&hw->napi);
3531 }
3532 }
3533
3534 static void sky2_restart(struct work_struct *work)
3535 {
3536 struct sky2_hw *hw = container_of(work, struct sky2_hw, restart_work);
3537
3538 rtnl_lock();
3539
3540 sky2_all_down(hw);
3541 sky2_reset(hw);
3542 sky2_all_up(hw);
3543
3544 rtnl_unlock();
3545 }
3546
3547 static inline u8 sky2_wol_supported(const struct sky2_hw *hw)
3548 {
3549 return sky2_is_copper(hw) ? (WAKE_PHY | WAKE_MAGIC) : 0;
3550 }
3551
3552 static void sky2_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
3553 {
3554 const struct sky2_port *sky2 = netdev_priv(dev);
3555
3556 wol->supported = sky2_wol_supported(sky2->hw);
3557 wol->wolopts = sky2->wol;
3558 }
3559
3560 static int sky2_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
3561 {
3562 struct sky2_port *sky2 = netdev_priv(dev);
3563 struct sky2_hw *hw = sky2->hw;
3564 bool enable_wakeup = false;
3565 int i;
3566
3567 if ((wol->wolopts & ~sky2_wol_supported(sky2->hw)) ||
3568 !device_can_wakeup(&hw->pdev->dev))
3569 return -EOPNOTSUPP;
3570
3571 sky2->wol = wol->wolopts;
3572
3573 for (i = 0; i < hw->ports; i++) {
3574 struct net_device *dev = hw->dev[i];
3575 struct sky2_port *sky2 = netdev_priv(dev);
3576
3577 if (sky2->wol)
3578 enable_wakeup = true;
3579 }
3580 device_set_wakeup_enable(&hw->pdev->dev, enable_wakeup);
3581
3582 return 0;
3583 }
3584
3585 static u32 sky2_supported_modes(const struct sky2_hw *hw)
3586 {
3587 if (sky2_is_copper(hw)) {
3588 u32 modes = SUPPORTED_10baseT_Half
3589 | SUPPORTED_10baseT_Full
3590 | SUPPORTED_100baseT_Half
3591 | SUPPORTED_100baseT_Full;
3592
3593 if (hw->flags & SKY2_HW_GIGABIT)
3594 modes |= SUPPORTED_1000baseT_Half
3595 | SUPPORTED_1000baseT_Full;
3596 return modes;
3597 } else
3598 return SUPPORTED_1000baseT_Half
3599 | SUPPORTED_1000baseT_Full;
3600 }
3601
3602 static int sky2_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
3603 {
3604 struct sky2_port *sky2 = netdev_priv(dev);
3605 struct sky2_hw *hw = sky2->hw;
3606
3607 ecmd->transceiver = XCVR_INTERNAL;
3608 ecmd->supported = sky2_supported_modes(hw);
3609 ecmd->phy_address = PHY_ADDR_MARV;
3610 if (sky2_is_copper(hw)) {
3611 ecmd->port = PORT_TP;
3612 ethtool_cmd_speed_set(ecmd, sky2->speed);
3613 ecmd->supported |= SUPPORTED_Autoneg | SUPPORTED_TP;
3614 } else {
3615 ethtool_cmd_speed_set(ecmd, SPEED_1000);
3616 ecmd->port = PORT_FIBRE;
3617 ecmd->supported |= SUPPORTED_Autoneg | SUPPORTED_FIBRE;
3618 }
3619
3620 ecmd->advertising = sky2->advertising;
3621 ecmd->autoneg = (sky2->flags & SKY2_FLAG_AUTO_SPEED)
3622 ? AUTONEG_ENABLE : AUTONEG_DISABLE;
3623 ecmd->duplex = sky2->duplex;
3624 return 0;
3625 }
3626
3627 static int sky2_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
3628 {
3629 struct sky2_port *sky2 = netdev_priv(dev);
3630 const struct sky2_hw *hw = sky2->hw;
3631 u32 supported = sky2_supported_modes(hw);
3632
3633 if (ecmd->autoneg == AUTONEG_ENABLE) {
3634 if (ecmd->advertising & ~supported)
3635 return -EINVAL;
3636
3637 if (sky2_is_copper(hw))
3638 sky2->advertising = ecmd->advertising |
3639 ADVERTISED_TP |
3640 ADVERTISED_Autoneg;
3641 else
3642 sky2->advertising = ecmd->advertising |
3643 ADVERTISED_FIBRE |
3644 ADVERTISED_Autoneg;
3645
3646 sky2->flags |= SKY2_FLAG_AUTO_SPEED;
3647 sky2->duplex = -1;
3648 sky2->speed = -1;
3649 } else {
3650 u32 setting;
3651 u32 speed = ethtool_cmd_speed(ecmd);
3652
3653 switch (speed) {
3654 case SPEED_1000:
3655 if (ecmd->duplex == DUPLEX_FULL)
3656 setting = SUPPORTED_1000baseT_Full;
3657 else if (ecmd->duplex == DUPLEX_HALF)
3658 setting = SUPPORTED_1000baseT_Half;
3659 else
3660 return -EINVAL;
3661 break;
3662 case SPEED_100:
3663 if (ecmd->duplex == DUPLEX_FULL)
3664 setting = SUPPORTED_100baseT_Full;
3665 else if (ecmd->duplex == DUPLEX_HALF)
3666 setting = SUPPORTED_100baseT_Half;
3667 else
3668 return -EINVAL;
3669 break;
3670
3671 case SPEED_10:
3672 if (ecmd->duplex == DUPLEX_FULL)
3673 setting = SUPPORTED_10baseT_Full;
3674 else if (ecmd->duplex == DUPLEX_HALF)
3675 setting = SUPPORTED_10baseT_Half;
3676 else
3677 return -EINVAL;
3678 break;
3679 default:
3680 return -EINVAL;
3681 }
3682
3683 if ((setting & supported) == 0)
3684 return -EINVAL;
3685
3686 sky2->speed = speed;
3687 sky2->duplex = ecmd->duplex;
3688 sky2->flags &= ~SKY2_FLAG_AUTO_SPEED;
3689 }
3690
3691 if (netif_running(dev)) {
3692 sky2_phy_reinit(sky2);
3693 sky2_set_multicast(dev);
3694 }
3695
3696 return 0;
3697 }
3698
3699 static void sky2_get_drvinfo(struct net_device *dev,
3700 struct ethtool_drvinfo *info)
3701 {
3702 struct sky2_port *sky2 = netdev_priv(dev);
3703
3704 strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
3705 strlcpy(info->version, DRV_VERSION, sizeof(info->version));
3706 strlcpy(info->bus_info, pci_name(sky2->hw->pdev),
3707 sizeof(info->bus_info));
3708 }
3709
3710 static const struct sky2_stat {
3711 char name[ETH_GSTRING_LEN];
3712 u16 offset;
3713 } sky2_stats[] = {
3714 { "tx_bytes", GM_TXO_OK_HI },
3715 { "rx_bytes", GM_RXO_OK_HI },
3716 { "tx_broadcast", GM_TXF_BC_OK },
3717 { "rx_broadcast", GM_RXF_BC_OK },
3718 { "tx_multicast", GM_TXF_MC_OK },
3719 { "rx_multicast", GM_RXF_MC_OK },
3720 { "tx_unicast", GM_TXF_UC_OK },
3721 { "rx_unicast", GM_RXF_UC_OK },
3722 { "tx_mac_pause", GM_TXF_MPAUSE },
3723 { "rx_mac_pause", GM_RXF_MPAUSE },
3724 { "collisions", GM_TXF_COL },
3725 { "late_collision",GM_TXF_LAT_COL },
3726 { "aborted", GM_TXF_ABO_COL },
3727 { "single_collisions", GM_TXF_SNG_COL },
3728 { "multi_collisions", GM_TXF_MUL_COL },
3729
3730 { "rx_short", GM_RXF_SHT },
3731 { "rx_runt", GM_RXE_FRAG },
3732 { "rx_64_byte_packets", GM_RXF_64B },
3733 { "rx_65_to_127_byte_packets", GM_RXF_127B },
3734 { "rx_128_to_255_byte_packets", GM_RXF_255B },
3735 { "rx_256_to_511_byte_packets", GM_RXF_511B },
3736 { "rx_512_to_1023_byte_packets", GM_RXF_1023B },
3737 { "rx_1024_to_1518_byte_packets", GM_RXF_1518B },
3738 { "rx_1518_to_max_byte_packets", GM_RXF_MAX_SZ },
3739 { "rx_too_long", GM_RXF_LNG_ERR },
3740 { "rx_fifo_overflow", GM_RXE_FIFO_OV },
3741 { "rx_jabber", GM_RXF_JAB_PKT },
3742 { "rx_fcs_error", GM_RXF_FCS_ERR },
3743
3744 { "tx_64_byte_packets", GM_TXF_64B },
3745 { "tx_65_to_127_byte_packets", GM_TXF_127B },
3746 { "tx_128_to_255_byte_packets", GM_TXF_255B },
3747 { "tx_256_to_511_byte_packets", GM_TXF_511B },
3748 { "tx_512_to_1023_byte_packets", GM_TXF_1023B },
3749 { "tx_1024_to_1518_byte_packets", GM_TXF_1518B },
3750 { "tx_1519_to_max_byte_packets", GM_TXF_MAX_SZ },
3751 { "tx_fifo_underrun", GM_TXE_FIFO_UR },
3752 };
3753
3754 static u32 sky2_get_msglevel(struct net_device *netdev)
3755 {
3756 struct sky2_port *sky2 = netdev_priv(netdev);
3757 return sky2->msg_enable;
3758 }
3759
3760 static int sky2_nway_reset(struct net_device *dev)
3761 {
3762 struct sky2_port *sky2 = netdev_priv(dev);
3763
3764 if (!netif_running(dev) || !(sky2->flags & SKY2_FLAG_AUTO_SPEED))
3765 return -EINVAL;
3766
3767 sky2_phy_reinit(sky2);
3768 sky2_set_multicast(dev);
3769
3770 return 0;
3771 }
3772
3773 static void sky2_phy_stats(struct sky2_port *sky2, u64 * data, unsigned count)
3774 {
3775 struct sky2_hw *hw = sky2->hw;
3776 unsigned port = sky2->port;
3777 int i;
3778
3779 data[0] = get_stats64(hw, port, GM_TXO_OK_LO);
3780 data[1] = get_stats64(hw, port, GM_RXO_OK_LO);
3781
3782 for (i = 2; i < count; i++)
3783 data[i] = get_stats32(hw, port, sky2_stats[i].offset);
3784 }
3785
3786 static void sky2_set_msglevel(struct net_device *netdev, u32 value)
3787 {
3788 struct sky2_port *sky2 = netdev_priv(netdev);
3789 sky2->msg_enable = value;
3790 }
3791
3792 static int sky2_get_sset_count(struct net_device *dev, int sset)
3793 {
3794 switch (sset) {
3795 case ETH_SS_STATS:
3796 return ARRAY_SIZE(sky2_stats);
3797 default:
3798 return -EOPNOTSUPP;
3799 }
3800 }
3801
3802 static void sky2_get_ethtool_stats(struct net_device *dev,
3803 struct ethtool_stats *stats, u64 * data)
3804 {
3805 struct sky2_port *sky2 = netdev_priv(dev);
3806
3807 sky2_phy_stats(sky2, data, ARRAY_SIZE(sky2_stats));
3808 }
3809
3810 static void sky2_get_strings(struct net_device *dev, u32 stringset, u8 * data)
3811 {
3812 int i;
3813
3814 switch (stringset) {
3815 case ETH_SS_STATS:
3816 for (i = 0; i < ARRAY_SIZE(sky2_stats); i++)
3817 memcpy(data + i * ETH_GSTRING_LEN,
3818 sky2_stats[i].name, ETH_GSTRING_LEN);
3819 break;
3820 }
3821 }
3822
3823 static int sky2_set_mac_address(struct net_device *dev, void *p)
3824 {
3825 struct sky2_port *sky2 = netdev_priv(dev);
3826 struct sky2_hw *hw = sky2->hw;
3827 unsigned port = sky2->port;
3828 const struct sockaddr *addr = p;
3829
3830 if (!is_valid_ether_addr(addr->sa_data))
3831 return -EADDRNOTAVAIL;
3832
3833 memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
3834 memcpy_toio(hw->regs + B2_MAC_1 + port * 8,
3835 dev->dev_addr, ETH_ALEN);
3836 memcpy_toio(hw->regs + B2_MAC_2 + port * 8,
3837 dev->dev_addr, ETH_ALEN);
3838
3839 /* virtual address for data */
3840 gma_set_addr(hw, port, GM_SRC_ADDR_2L, dev->dev_addr);
3841
3842 /* physical address: used for pause frames */
3843 gma_set_addr(hw, port, GM_SRC_ADDR_1L, dev->dev_addr);
3844
3845 return 0;
3846 }
3847
3848 static inline void sky2_add_filter(u8 filter[8], const u8 *addr)
3849 {
3850 u32 bit;
3851
3852 bit = ether_crc(ETH_ALEN, addr) & 63;
3853 filter[bit >> 3] |= 1 << (bit & 7);
3854 }
3855
3856 static void sky2_set_multicast(struct net_device *dev)
3857 {
3858 struct sky2_port *sky2 = netdev_priv(dev);
3859 struct sky2_hw *hw = sky2->hw;
3860 unsigned port = sky2->port;
3861 struct netdev_hw_addr *ha;
3862 u16 reg;
3863 u8 filter[8];
3864 int rx_pause;
3865 static const u8 pause_mc_addr[ETH_ALEN] = { 0x1, 0x80, 0xc2, 0x0, 0x0, 0x1 };
3866
3867 rx_pause = (sky2->flow_status == FC_RX || sky2->flow_status == FC_BOTH);
3868 memset(filter, 0, sizeof(filter));
3869
3870 reg = gma_read16(hw, port, GM_RX_CTRL);
3871 reg |= GM_RXCR_UCF_ENA;
3872
3873 if (dev->flags & IFF_PROMISC) /* promiscuous */
3874 reg &= ~(GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA);
3875 else if (dev->flags & IFF_ALLMULTI)
3876 memset(filter, 0xff, sizeof(filter));
3877 else if (netdev_mc_empty(dev) && !rx_pause)
3878 reg &= ~GM_RXCR_MCF_ENA;
3879 else {
3880 reg |= GM_RXCR_MCF_ENA;
3881
3882 if (rx_pause)
3883 sky2_add_filter(filter, pause_mc_addr);
3884
3885 netdev_for_each_mc_addr(ha, dev)
3886 sky2_add_filter(filter, ha->addr);
3887 }
3888
3889 gma_write16(hw, port, GM_MC_ADDR_H1,
3890 (u16) filter[0] | ((u16) filter[1] << 8));
3891 gma_write16(hw, port, GM_MC_ADDR_H2,
3892 (u16) filter[2] | ((u16) filter[3] << 8));
3893 gma_write16(hw, port, GM_MC_ADDR_H3,
3894 (u16) filter[4] | ((u16) filter[5] << 8));
3895 gma_write16(hw, port, GM_MC_ADDR_H4,
3896 (u16) filter[6] | ((u16) filter[7] << 8));
3897
3898 gma_write16(hw, port, GM_RX_CTRL, reg);
3899 }
3900
3901 static struct rtnl_link_stats64 *sky2_get_stats(struct net_device *dev,
3902 struct rtnl_link_stats64 *stats)
3903 {
3904 struct sky2_port *sky2 = netdev_priv(dev);
3905 struct sky2_hw *hw = sky2->hw;
3906 unsigned port = sky2->port;
3907 unsigned int start;
3908 u64 _bytes, _packets;
3909
3910 do {
3911 start = u64_stats_fetch_begin_irq(&sky2->rx_stats.syncp);
3912 _bytes = sky2->rx_stats.bytes;
3913 _packets = sky2->rx_stats.packets;
3914 } while (u64_stats_fetch_retry_irq(&sky2->rx_stats.syncp, start));
3915
3916 stats->rx_packets = _packets;
3917 stats->rx_bytes = _bytes;
3918
3919 do {
3920 start = u64_stats_fetch_begin_irq(&sky2->tx_stats.syncp);
3921 _bytes = sky2->tx_stats.bytes;
3922 _packets = sky2->tx_stats.packets;
3923 } while (u64_stats_fetch_retry_irq(&sky2->tx_stats.syncp, start));
3924
3925 stats->tx_packets = _packets;
3926 stats->tx_bytes = _bytes;
3927
3928 stats->multicast = get_stats32(hw, port, GM_RXF_MC_OK)
3929 + get_stats32(hw, port, GM_RXF_BC_OK);
3930
3931 stats->collisions = get_stats32(hw, port, GM_TXF_COL);
3932
3933 stats->rx_length_errors = get_stats32(hw, port, GM_RXF_LNG_ERR);
3934 stats->rx_crc_errors = get_stats32(hw, port, GM_RXF_FCS_ERR);
3935 stats->rx_frame_errors = get_stats32(hw, port, GM_RXF_SHT)
3936 + get_stats32(hw, port, GM_RXE_FRAG);
3937 stats->rx_over_errors = get_stats32(hw, port, GM_RXE_FIFO_OV);
3938
3939 stats->rx_dropped = dev->stats.rx_dropped;
3940 stats->rx_fifo_errors = dev->stats.rx_fifo_errors;
3941 stats->tx_fifo_errors = dev->stats.tx_fifo_errors;
3942
3943 return stats;
3944 }
3945
3946 /* Can have one global because blinking is controlled by
3947 * ethtool and that is always under RTNL mutex
3948 */
3949 static void sky2_led(struct sky2_port *sky2, enum led_mode mode)
3950 {
3951 struct sky2_hw *hw = sky2->hw;
3952 unsigned port = sky2->port;
3953
3954 spin_lock_bh(&sky2->phy_lock);
3955 if (hw->chip_id == CHIP_ID_YUKON_EC_U ||
3956 hw->chip_id == CHIP_ID_YUKON_EX ||
3957 hw->chip_id == CHIP_ID_YUKON_SUPR) {
3958 u16 pg;
3959 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
3960 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
3961
3962 switch (mode) {
3963 case MO_LED_OFF:
3964 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
3965 PHY_M_LEDC_LOS_CTRL(8) |
3966 PHY_M_LEDC_INIT_CTRL(8) |
3967 PHY_M_LEDC_STA1_CTRL(8) |
3968 PHY_M_LEDC_STA0_CTRL(8));
3969 break;
3970 case MO_LED_ON:
3971 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
3972 PHY_M_LEDC_LOS_CTRL(9) |
3973 PHY_M_LEDC_INIT_CTRL(9) |
3974 PHY_M_LEDC_STA1_CTRL(9) |
3975 PHY_M_LEDC_STA0_CTRL(9));
3976 break;
3977 case MO_LED_BLINK:
3978 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
3979 PHY_M_LEDC_LOS_CTRL(0xa) |
3980 PHY_M_LEDC_INIT_CTRL(0xa) |
3981 PHY_M_LEDC_STA1_CTRL(0xa) |
3982 PHY_M_LEDC_STA0_CTRL(0xa));
3983 break;
3984 case MO_LED_NORM:
3985 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
3986 PHY_M_LEDC_LOS_CTRL(1) |
3987 PHY_M_LEDC_INIT_CTRL(8) |
3988 PHY_M_LEDC_STA1_CTRL(7) |
3989 PHY_M_LEDC_STA0_CTRL(7));
3990 }
3991
3992 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
3993 } else
3994 gm_phy_write(hw, port, PHY_MARV_LED_OVER,
3995 PHY_M_LED_MO_DUP(mode) |
3996 PHY_M_LED_MO_10(mode) |
3997 PHY_M_LED_MO_100(mode) |
3998 PHY_M_LED_MO_1000(mode) |
3999 PHY_M_LED_MO_RX(mode) |
4000 PHY_M_LED_MO_TX(mode));
4001
4002 spin_unlock_bh(&sky2->phy_lock);
4003 }
4004
4005 /* blink LED's for finding board */
4006 static int sky2_set_phys_id(struct net_device *dev,
4007 enum ethtool_phys_id_state state)
4008 {
4009 struct sky2_port *sky2 = netdev_priv(dev);
4010
4011 switch (state) {
4012 case ETHTOOL_ID_ACTIVE:
4013 return 1; /* cycle on/off once per second */
4014 case ETHTOOL_ID_INACTIVE:
4015 sky2_led(sky2, MO_LED_NORM);
4016 break;
4017 case ETHTOOL_ID_ON:
4018 sky2_led(sky2, MO_LED_ON);
4019 break;
4020 case ETHTOOL_ID_OFF:
4021 sky2_led(sky2, MO_LED_OFF);
4022 break;
4023 }
4024
4025 return 0;
4026 }
4027
4028 static void sky2_get_pauseparam(struct net_device *dev,
4029 struct ethtool_pauseparam *ecmd)
4030 {
4031 struct sky2_port *sky2 = netdev_priv(dev);
4032
4033 switch (sky2->flow_mode) {
4034 case FC_NONE:
4035 ecmd->tx_pause = ecmd->rx_pause = 0;
4036 break;
4037 case FC_TX:
4038 ecmd->tx_pause = 1, ecmd->rx_pause = 0;
4039 break;
4040 case FC_RX:
4041 ecmd->tx_pause = 0, ecmd->rx_pause = 1;
4042 break;
4043 case FC_BOTH:
4044 ecmd->tx_pause = ecmd->rx_pause = 1;
4045 }
4046
4047 ecmd->autoneg = (sky2->flags & SKY2_FLAG_AUTO_PAUSE)
4048 ? AUTONEG_ENABLE : AUTONEG_DISABLE;
4049 }
4050
4051 static int sky2_set_pauseparam(struct net_device *dev,
4052 struct ethtool_pauseparam *ecmd)
4053 {
4054 struct sky2_port *sky2 = netdev_priv(dev);
4055
4056 if (ecmd->autoneg == AUTONEG_ENABLE)
4057 sky2->flags |= SKY2_FLAG_AUTO_PAUSE;
4058 else
4059 sky2->flags &= ~SKY2_FLAG_AUTO_PAUSE;
4060
4061 sky2->flow_mode = sky2_flow(ecmd->rx_pause, ecmd->tx_pause);
4062
4063 if (netif_running(dev))
4064 sky2_phy_reinit(sky2);
4065
4066 return 0;
4067 }
4068
4069 static int sky2_get_coalesce(struct net_device *dev,
4070 struct ethtool_coalesce *ecmd)
4071 {
4072 struct sky2_port *sky2 = netdev_priv(dev);
4073 struct sky2_hw *hw = sky2->hw;
4074
4075 if (sky2_read8(hw, STAT_TX_TIMER_CTRL) == TIM_STOP)
4076 ecmd->tx_coalesce_usecs = 0;
4077 else {
4078 u32 clks = sky2_read32(hw, STAT_TX_TIMER_INI);
4079 ecmd->tx_coalesce_usecs = sky2_clk2us(hw, clks);
4080 }
4081 ecmd->tx_max_coalesced_frames = sky2_read16(hw, STAT_TX_IDX_TH);
4082
4083 if (sky2_read8(hw, STAT_LEV_TIMER_CTRL) == TIM_STOP)
4084 ecmd->rx_coalesce_usecs = 0;
4085 else {
4086 u32 clks = sky2_read32(hw, STAT_LEV_TIMER_INI);
4087 ecmd->rx_coalesce_usecs = sky2_clk2us(hw, clks);
4088 }
4089 ecmd->rx_max_coalesced_frames = sky2_read8(hw, STAT_FIFO_WM);
4090
4091 if (sky2_read8(hw, STAT_ISR_TIMER_CTRL) == TIM_STOP)
4092 ecmd->rx_coalesce_usecs_irq = 0;
4093 else {
4094 u32 clks = sky2_read32(hw, STAT_ISR_TIMER_INI);
4095 ecmd->rx_coalesce_usecs_irq = sky2_clk2us(hw, clks);
4096 }
4097
4098 ecmd->rx_max_coalesced_frames_irq = sky2_read8(hw, STAT_FIFO_ISR_WM);
4099
4100 return 0;
4101 }
4102
4103 /* Note: this affect both ports */
4104 static int sky2_set_coalesce(struct net_device *dev,
4105 struct ethtool_coalesce *ecmd)
4106 {
4107 struct sky2_port *sky2 = netdev_priv(dev);
4108 struct sky2_hw *hw = sky2->hw;
4109 const u32 tmax = sky2_clk2us(hw, 0x0ffffff);
4110
4111 if (ecmd->tx_coalesce_usecs > tmax ||
4112 ecmd->rx_coalesce_usecs > tmax ||
4113 ecmd->rx_coalesce_usecs_irq > tmax)
4114 return -EINVAL;
4115
4116 if (ecmd->tx_max_coalesced_frames >= sky2->tx_ring_size-1)
4117 return -EINVAL;
4118 if (ecmd->rx_max_coalesced_frames > RX_MAX_PENDING)
4119 return -EINVAL;
4120 if (ecmd->rx_max_coalesced_frames_irq > RX_MAX_PENDING)
4121 return -EINVAL;
4122
4123 if (ecmd->tx_coalesce_usecs == 0)
4124 sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP);
4125 else {
4126 sky2_write32(hw, STAT_TX_TIMER_INI,
4127 sky2_us2clk(hw, ecmd->tx_coalesce_usecs));
4128 sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
4129 }
4130 sky2_write16(hw, STAT_TX_IDX_TH, ecmd->tx_max_coalesced_frames);
4131
4132 if (ecmd->rx_coalesce_usecs == 0)
4133 sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_STOP);
4134 else {
4135 sky2_write32(hw, STAT_LEV_TIMER_INI,
4136 sky2_us2clk(hw, ecmd->rx_coalesce_usecs));
4137 sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_START);
4138 }
4139 sky2_write8(hw, STAT_FIFO_WM, ecmd->rx_max_coalesced_frames);
4140
4141 if (ecmd->rx_coalesce_usecs_irq == 0)
4142 sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_STOP);
4143 else {
4144 sky2_write32(hw, STAT_ISR_TIMER_INI,
4145 sky2_us2clk(hw, ecmd->rx_coalesce_usecs_irq));
4146 sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_START);
4147 }
4148 sky2_write8(hw, STAT_FIFO_ISR_WM, ecmd->rx_max_coalesced_frames_irq);
4149 return 0;
4150 }
4151
4152 /*
4153 * Hardware is limited to min of 128 and max of 2048 for ring size
4154 * and rounded up to next power of two
4155 * to avoid division in modulus calclation
4156 */
4157 static unsigned long roundup_ring_size(unsigned long pending)
4158 {
4159 return max(128ul, roundup_pow_of_two(pending+1));
4160 }
4161
4162 static void sky2_get_ringparam(struct net_device *dev,
4163 struct ethtool_ringparam *ering)
4164 {
4165 struct sky2_port *sky2 = netdev_priv(dev);
4166
4167 ering->rx_max_pending = RX_MAX_PENDING;
4168 ering->tx_max_pending = TX_MAX_PENDING;
4169
4170 ering->rx_pending = sky2->rx_pending;
4171 ering->tx_pending = sky2->tx_pending;
4172 }
4173
4174 static int sky2_set_ringparam(struct net_device *dev,
4175 struct ethtool_ringparam *ering)
4176 {
4177 struct sky2_port *sky2 = netdev_priv(dev);
4178
4179 if (ering->rx_pending > RX_MAX_PENDING ||
4180 ering->rx_pending < 8 ||
4181 ering->tx_pending < TX_MIN_PENDING ||
4182 ering->tx_pending > TX_MAX_PENDING)
4183 return -EINVAL;
4184
4185 sky2_detach(dev);
4186
4187 sky2->rx_pending = ering->rx_pending;
4188 sky2->tx_pending = ering->tx_pending;
4189 sky2->tx_ring_size = roundup_ring_size(sky2->tx_pending);
4190
4191 return sky2_reattach(dev);
4192 }
4193
4194 static int sky2_get_regs_len(struct net_device *dev)
4195 {
4196 return 0x4000;
4197 }
4198
4199 static int sky2_reg_access_ok(struct sky2_hw *hw, unsigned int b)
4200 {
4201 /* This complicated switch statement is to make sure and
4202 * only access regions that are unreserved.
4203 * Some blocks are only valid on dual port cards.
4204 */
4205 switch (b) {
4206 /* second port */
4207 case 5: /* Tx Arbiter 2 */
4208 case 9: /* RX2 */
4209 case 14 ... 15: /* TX2 */
4210 case 17: case 19: /* Ram Buffer 2 */
4211 case 22 ... 23: /* Tx Ram Buffer 2 */
4212 case 25: /* Rx MAC Fifo 1 */
4213 case 27: /* Tx MAC Fifo 2 */
4214 case 31: /* GPHY 2 */
4215 case 40 ... 47: /* Pattern Ram 2 */
4216 case 52: case 54: /* TCP Segmentation 2 */
4217 case 112 ... 116: /* GMAC 2 */
4218 return hw->ports > 1;
4219
4220 case 0: /* Control */
4221 case 2: /* Mac address */
4222 case 4: /* Tx Arbiter 1 */
4223 case 7: /* PCI express reg */
4224 case 8: /* RX1 */
4225 case 12 ... 13: /* TX1 */
4226 case 16: case 18:/* Rx Ram Buffer 1 */
4227 case 20 ... 21: /* Tx Ram Buffer 1 */
4228 case 24: /* Rx MAC Fifo 1 */
4229 case 26: /* Tx MAC Fifo 1 */
4230 case 28 ... 29: /* Descriptor and status unit */
4231 case 30: /* GPHY 1*/
4232 case 32 ... 39: /* Pattern Ram 1 */
4233 case 48: case 50: /* TCP Segmentation 1 */
4234 case 56 ... 60: /* PCI space */
4235 case 80 ... 84: /* GMAC 1 */
4236 return 1;
4237
4238 default:
4239 return 0;
4240 }
4241 }
4242
4243 /*
4244 * Returns copy of control register region
4245 * Note: ethtool_get_regs always provides full size (16k) buffer
4246 */
4247 static void sky2_get_regs(struct net_device *dev, struct ethtool_regs *regs,
4248 void *p)
4249 {
4250 const struct sky2_port *sky2 = netdev_priv(dev);
4251 const void __iomem *io = sky2->hw->regs;
4252 unsigned int b;
4253
4254 regs->version = 1;
4255
4256 for (b = 0; b < 128; b++) {
4257 /* skip poisonous diagnostic ram region in block 3 */
4258 if (b == 3)
4259 memcpy_fromio(p + 0x10, io + 0x10, 128 - 0x10);
4260 else if (sky2_reg_access_ok(sky2->hw, b))
4261 memcpy_fromio(p, io, 128);
4262 else
4263 memset(p, 0, 128);
4264
4265 p += 128;
4266 io += 128;
4267 }
4268 }
4269
4270 static int sky2_get_eeprom_len(struct net_device *dev)
4271 {
4272 struct sky2_port *sky2 = netdev_priv(dev);
4273 struct sky2_hw *hw = sky2->hw;
4274 u16 reg2;
4275
4276 reg2 = sky2_pci_read16(hw, PCI_DEV_REG2);
4277 return 1 << ( ((reg2 & PCI_VPD_ROM_SZ) >> 14) + 8);
4278 }
4279
4280 static int sky2_vpd_wait(const struct sky2_hw *hw, int cap, u16 busy)
4281 {
4282 unsigned long start = jiffies;
4283
4284 while ( (sky2_pci_read16(hw, cap + PCI_VPD_ADDR) & PCI_VPD_ADDR_F) == busy) {
4285 /* Can take up to 10.6 ms for write */
4286 if (time_after(jiffies, start + HZ/4)) {
4287 dev_err(&hw->pdev->dev, "VPD cycle timed out\n");
4288 return -ETIMEDOUT;
4289 }
4290 mdelay(1);
4291 }
4292
4293 return 0;
4294 }
4295
4296 static int sky2_vpd_read(struct sky2_hw *hw, int cap, void *data,
4297 u16 offset, size_t length)
4298 {
4299 int rc = 0;
4300
4301 while (length > 0) {
4302 u32 val;
4303
4304 sky2_pci_write16(hw, cap + PCI_VPD_ADDR, offset);
4305 rc = sky2_vpd_wait(hw, cap, 0);
4306 if (rc)
4307 break;
4308
4309 val = sky2_pci_read32(hw, cap + PCI_VPD_DATA);
4310
4311 memcpy(data, &val, min(sizeof(val), length));
4312 offset += sizeof(u32);
4313 data += sizeof(u32);
4314 length -= sizeof(u32);
4315 }
4316
4317 return rc;
4318 }
4319
4320 static int sky2_vpd_write(struct sky2_hw *hw, int cap, const void *data,
4321 u16 offset, unsigned int length)
4322 {
4323 unsigned int i;
4324 int rc = 0;
4325
4326 for (i = 0; i < length; i += sizeof(u32)) {
4327 u32 val = *(u32 *)(data + i);
4328
4329 sky2_pci_write32(hw, cap + PCI_VPD_DATA, val);
4330 sky2_pci_write32(hw, cap + PCI_VPD_ADDR, offset | PCI_VPD_ADDR_F);
4331
4332 rc = sky2_vpd_wait(hw, cap, PCI_VPD_ADDR_F);
4333 if (rc)
4334 break;
4335 }
4336 return rc;
4337 }
4338
4339 static int sky2_get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
4340 u8 *data)
4341 {
4342 struct sky2_port *sky2 = netdev_priv(dev);
4343 int cap = pci_find_capability(sky2->hw->pdev, PCI_CAP_ID_VPD);
4344
4345 if (!cap)
4346 return -EINVAL;
4347
4348 eeprom->magic = SKY2_EEPROM_MAGIC;
4349
4350 return sky2_vpd_read(sky2->hw, cap, data, eeprom->offset, eeprom->len);
4351 }
4352
4353 static int sky2_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
4354 u8 *data)
4355 {
4356 struct sky2_port *sky2 = netdev_priv(dev);
4357 int cap = pci_find_capability(sky2->hw->pdev, PCI_CAP_ID_VPD);
4358
4359 if (!cap)
4360 return -EINVAL;
4361
4362 if (eeprom->magic != SKY2_EEPROM_MAGIC)
4363 return -EINVAL;
4364
4365 /* Partial writes not supported */
4366 if ((eeprom->offset & 3) || (eeprom->len & 3))
4367 return -EINVAL;
4368
4369 return sky2_vpd_write(sky2->hw, cap, data, eeprom->offset, eeprom->len);
4370 }
4371
4372 static netdev_features_t sky2_fix_features(struct net_device *dev,
4373 netdev_features_t features)
4374 {
4375 const struct sky2_port *sky2 = netdev_priv(dev);
4376 const struct sky2_hw *hw = sky2->hw;
4377
4378 /* In order to do Jumbo packets on these chips, need to turn off the
4379 * transmit store/forward. Therefore checksum offload won't work.
4380 */
4381 if (dev->mtu > ETH_DATA_LEN && hw->chip_id == CHIP_ID_YUKON_EC_U) {
4382 netdev_info(dev, "checksum offload not possible with jumbo frames\n");
4383 features &= ~(NETIF_F_TSO | NETIF_F_SG | NETIF_F_CSUM_MASK);
4384 }
4385
4386 /* Some hardware requires receive checksum for RSS to work. */
4387 if ( (features & NETIF_F_RXHASH) &&
4388 !(features & NETIF_F_RXCSUM) &&
4389 (sky2->hw->flags & SKY2_HW_RSS_CHKSUM)) {
4390 netdev_info(dev, "receive hashing forces receive checksum\n");
4391 features |= NETIF_F_RXCSUM;
4392 }
4393
4394 return features;
4395 }
4396
4397 static int sky2_set_features(struct net_device *dev, netdev_features_t features)
4398 {
4399 struct sky2_port *sky2 = netdev_priv(dev);
4400 netdev_features_t changed = dev->features ^ features;
4401
4402 if ((changed & NETIF_F_RXCSUM) &&
4403 !(sky2->hw->flags & SKY2_HW_NEW_LE)) {
4404 sky2_write32(sky2->hw,
4405 Q_ADDR(rxqaddr[sky2->port], Q_CSR),
4406 (features & NETIF_F_RXCSUM)
4407 ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM);
4408 }
4409
4410 if (changed & NETIF_F_RXHASH)
4411 rx_set_rss(dev, features);
4412
4413 if (changed & (NETIF_F_HW_VLAN_CTAG_TX|NETIF_F_HW_VLAN_CTAG_RX))
4414 sky2_vlan_mode(dev, features);
4415
4416 return 0;
4417 }
4418
4419 static const struct ethtool_ops sky2_ethtool_ops = {
4420 .get_settings = sky2_get_settings,
4421 .set_settings = sky2_set_settings,
4422 .get_drvinfo = sky2_get_drvinfo,
4423 .get_wol = sky2_get_wol,
4424 .set_wol = sky2_set_wol,
4425 .get_msglevel = sky2_get_msglevel,
4426 .set_msglevel = sky2_set_msglevel,
4427 .nway_reset = sky2_nway_reset,
4428 .get_regs_len = sky2_get_regs_len,
4429 .get_regs = sky2_get_regs,
4430 .get_link = ethtool_op_get_link,
4431 .get_eeprom_len = sky2_get_eeprom_len,
4432 .get_eeprom = sky2_get_eeprom,
4433 .set_eeprom = sky2_set_eeprom,
4434 .get_strings = sky2_get_strings,
4435 .get_coalesce = sky2_get_coalesce,
4436 .set_coalesce = sky2_set_coalesce,
4437 .get_ringparam = sky2_get_ringparam,
4438 .set_ringparam = sky2_set_ringparam,
4439 .get_pauseparam = sky2_get_pauseparam,
4440 .set_pauseparam = sky2_set_pauseparam,
4441 .set_phys_id = sky2_set_phys_id,
4442 .get_sset_count = sky2_get_sset_count,
4443 .get_ethtool_stats = sky2_get_ethtool_stats,
4444 };
4445
4446 #ifdef CONFIG_SKY2_DEBUG
4447
4448 static struct dentry *sky2_debug;
4449
4450
4451 /*
4452 * Read and parse the first part of Vital Product Data
4453 */
4454 #define VPD_SIZE 128
4455 #define VPD_MAGIC 0x82
4456
4457 static const struct vpd_tag {
4458 char tag[2];
4459 char *label;
4460 } vpd_tags[] = {
4461 { "PN", "Part Number" },
4462 { "EC", "Engineering Level" },
4463 { "MN", "Manufacturer" },
4464 { "SN", "Serial Number" },
4465 { "YA", "Asset Tag" },
4466 { "VL", "First Error Log Message" },
4467 { "VF", "Second Error Log Message" },
4468 { "VB", "Boot Agent ROM Configuration" },
4469 { "VE", "EFI UNDI Configuration" },
4470 };
4471
4472 static void sky2_show_vpd(struct seq_file *seq, struct sky2_hw *hw)
4473 {
4474 size_t vpd_size;
4475 loff_t offs;
4476 u8 len;
4477 unsigned char *buf;
4478 u16 reg2;
4479
4480 reg2 = sky2_pci_read16(hw, PCI_DEV_REG2);
4481 vpd_size = 1 << ( ((reg2 & PCI_VPD_ROM_SZ) >> 14) + 8);
4482
4483 seq_printf(seq, "%s Product Data\n", pci_name(hw->pdev));
4484 buf = kmalloc(vpd_size, GFP_KERNEL);
4485 if (!buf) {
4486 seq_puts(seq, "no memory!\n");
4487 return;
4488 }
4489
4490 if (pci_read_vpd(hw->pdev, 0, vpd_size, buf) < 0) {
4491 seq_puts(seq, "VPD read failed\n");
4492 goto out;
4493 }
4494
4495 if (buf[0] != VPD_MAGIC) {
4496 seq_printf(seq, "VPD tag mismatch: %#x\n", buf[0]);
4497 goto out;
4498 }
4499 len = buf[1];
4500 if (len == 0 || len > vpd_size - 4) {
4501 seq_printf(seq, "Invalid id length: %d\n", len);
4502 goto out;
4503 }
4504
4505 seq_printf(seq, "%.*s\n", len, buf + 3);
4506 offs = len + 3;
4507
4508 while (offs < vpd_size - 4) {
4509 int i;
4510
4511 if (!memcmp("RW", buf + offs, 2)) /* end marker */
4512 break;
4513 len = buf[offs + 2];
4514 if (offs + len + 3 >= vpd_size)
4515 break;
4516
4517 for (i = 0; i < ARRAY_SIZE(vpd_tags); i++) {
4518 if (!memcmp(vpd_tags[i].tag, buf + offs, 2)) {
4519 seq_printf(seq, " %s: %.*s\n",
4520 vpd_tags[i].label, len, buf + offs + 3);
4521 break;
4522 }
4523 }
4524 offs += len + 3;
4525 }
4526 out:
4527 kfree(buf);
4528 }
4529
4530 static int sky2_debug_show(struct seq_file *seq, void *v)
4531 {
4532 struct net_device *dev = seq->private;
4533 const struct sky2_port *sky2 = netdev_priv(dev);
4534 struct sky2_hw *hw = sky2->hw;
4535 unsigned port = sky2->port;
4536 unsigned idx, last;
4537 int sop;
4538
4539 sky2_show_vpd(seq, hw);
4540
4541 seq_printf(seq, "\nIRQ src=%x mask=%x control=%x\n",
4542 sky2_read32(hw, B0_ISRC),
4543 sky2_read32(hw, B0_IMSK),
4544 sky2_read32(hw, B0_Y2_SP_ICR));
4545
4546 if (!netif_running(dev)) {
4547 seq_printf(seq, "network not running\n");
4548 return 0;
4549 }
4550
4551 napi_disable(&hw->napi);
4552 last = sky2_read16(hw, STAT_PUT_IDX);
4553
4554 seq_printf(seq, "Status ring %u\n", hw->st_size);
4555 if (hw->st_idx == last)
4556 seq_puts(seq, "Status ring (empty)\n");
4557 else {
4558 seq_puts(seq, "Status ring\n");
4559 for (idx = hw->st_idx; idx != last && idx < hw->st_size;
4560 idx = RING_NEXT(idx, hw->st_size)) {
4561 const struct sky2_status_le *le = hw->st_le + idx;
4562 seq_printf(seq, "[%d] %#x %d %#x\n",
4563 idx, le->opcode, le->length, le->status);
4564 }
4565 seq_puts(seq, "\n");
4566 }
4567
4568 seq_printf(seq, "Tx ring pending=%u...%u report=%d done=%d\n",
4569 sky2->tx_cons, sky2->tx_prod,
4570 sky2_read16(hw, port == 0 ? STAT_TXA1_RIDX : STAT_TXA2_RIDX),
4571 sky2_read16(hw, Q_ADDR(txqaddr[port], Q_DONE)));
4572
4573 /* Dump contents of tx ring */
4574 sop = 1;
4575 for (idx = sky2->tx_next; idx != sky2->tx_prod && idx < sky2->tx_ring_size;
4576 idx = RING_NEXT(idx, sky2->tx_ring_size)) {
4577 const struct sky2_tx_le *le = sky2->tx_le + idx;
4578 u32 a = le32_to_cpu(le->addr);
4579
4580 if (sop)
4581 seq_printf(seq, "%u:", idx);
4582 sop = 0;
4583
4584 switch (le->opcode & ~HW_OWNER) {
4585 case OP_ADDR64:
4586 seq_printf(seq, " %#x:", a);
4587 break;
4588 case OP_LRGLEN:
4589 seq_printf(seq, " mtu=%d", a);
4590 break;
4591 case OP_VLAN:
4592 seq_printf(seq, " vlan=%d", be16_to_cpu(le->length));
4593 break;
4594 case OP_TCPLISW:
4595 seq_printf(seq, " csum=%#x", a);
4596 break;
4597 case OP_LARGESEND:
4598 seq_printf(seq, " tso=%#x(%d)", a, le16_to_cpu(le->length));
4599 break;
4600 case OP_PACKET:
4601 seq_printf(seq, " %#x(%d)", a, le16_to_cpu(le->length));
4602 break;
4603 case OP_BUFFER:
4604 seq_printf(seq, " frag=%#x(%d)", a, le16_to_cpu(le->length));
4605 break;
4606 default:
4607 seq_printf(seq, " op=%#x,%#x(%d)", le->opcode,
4608 a, le16_to_cpu(le->length));
4609 }
4610
4611 if (le->ctrl & EOP) {
4612 seq_putc(seq, '\n');
4613 sop = 1;
4614 }
4615 }
4616
4617 seq_printf(seq, "\nRx ring hw get=%d put=%d last=%d\n",
4618 sky2_read16(hw, Y2_QADDR(rxqaddr[port], PREF_UNIT_GET_IDX)),
4619 sky2_read16(hw, Y2_QADDR(rxqaddr[port], PREF_UNIT_PUT_IDX)),
4620 sky2_read16(hw, Y2_QADDR(rxqaddr[port], PREF_UNIT_LAST_IDX)));
4621
4622 sky2_read32(hw, B0_Y2_SP_LISR);
4623 napi_enable(&hw->napi);
4624 return 0;
4625 }
4626
4627 static int sky2_debug_open(struct inode *inode, struct file *file)
4628 {
4629 return single_open(file, sky2_debug_show, inode->i_private);
4630 }
4631
4632 static const struct file_operations sky2_debug_fops = {
4633 .owner = THIS_MODULE,
4634 .open = sky2_debug_open,
4635 .read = seq_read,
4636 .llseek = seq_lseek,
4637 .release = single_release,
4638 };
4639
4640 /*
4641 * Use network device events to create/remove/rename
4642 * debugfs file entries
4643 */
4644 static int sky2_device_event(struct notifier_block *unused,
4645 unsigned long event, void *ptr)
4646 {
4647 struct net_device *dev = netdev_notifier_info_to_dev(ptr);
4648 struct sky2_port *sky2 = netdev_priv(dev);
4649
4650 if (dev->netdev_ops->ndo_open != sky2_open || !sky2_debug)
4651 return NOTIFY_DONE;
4652
4653 switch (event) {
4654 case NETDEV_CHANGENAME:
4655 if (sky2->debugfs) {
4656 sky2->debugfs = debugfs_rename(sky2_debug, sky2->debugfs,
4657 sky2_debug, dev->name);
4658 }
4659 break;
4660
4661 case NETDEV_GOING_DOWN:
4662 if (sky2->debugfs) {
4663 netdev_printk(KERN_DEBUG, dev, "remove debugfs\n");
4664 debugfs_remove(sky2->debugfs);
4665 sky2->debugfs = NULL;
4666 }
4667 break;
4668
4669 case NETDEV_UP:
4670 sky2->debugfs = debugfs_create_file(dev->name, S_IRUGO,
4671 sky2_debug, dev,
4672 &sky2_debug_fops);
4673 if (IS_ERR(sky2->debugfs))
4674 sky2->debugfs = NULL;
4675 }
4676
4677 return NOTIFY_DONE;
4678 }
4679
4680 static struct notifier_block sky2_notifier = {
4681 .notifier_call = sky2_device_event,
4682 };
4683
4684
4685 static __init void sky2_debug_init(void)
4686 {
4687 struct dentry *ent;
4688
4689 ent = debugfs_create_dir("sky2", NULL);
4690 if (!ent || IS_ERR(ent))
4691 return;
4692
4693 sky2_debug = ent;
4694 register_netdevice_notifier(&sky2_notifier);
4695 }
4696
4697 static __exit void sky2_debug_cleanup(void)
4698 {
4699 if (sky2_debug) {
4700 unregister_netdevice_notifier(&sky2_notifier);
4701 debugfs_remove(sky2_debug);
4702 sky2_debug = NULL;
4703 }
4704 }
4705
4706 #else
4707 #define sky2_debug_init()
4708 #define sky2_debug_cleanup()
4709 #endif
4710
4711 /* Two copies of network device operations to handle special case of
4712 not allowing netpoll on second port */
4713 static const struct net_device_ops sky2_netdev_ops[2] = {
4714 {
4715 .ndo_open = sky2_open,
4716 .ndo_stop = sky2_close,
4717 .ndo_start_xmit = sky2_xmit_frame,
4718 .ndo_do_ioctl = sky2_ioctl,
4719 .ndo_validate_addr = eth_validate_addr,
4720 .ndo_set_mac_address = sky2_set_mac_address,
4721 .ndo_set_rx_mode = sky2_set_multicast,
4722 .ndo_change_mtu = sky2_change_mtu,
4723 .ndo_fix_features = sky2_fix_features,
4724 .ndo_set_features = sky2_set_features,
4725 .ndo_tx_timeout = sky2_tx_timeout,
4726 .ndo_get_stats64 = sky2_get_stats,
4727 #ifdef CONFIG_NET_POLL_CONTROLLER
4728 .ndo_poll_controller = sky2_netpoll,
4729 #endif
4730 },
4731 {
4732 .ndo_open = sky2_open,
4733 .ndo_stop = sky2_close,
4734 .ndo_start_xmit = sky2_xmit_frame,
4735 .ndo_do_ioctl = sky2_ioctl,
4736 .ndo_validate_addr = eth_validate_addr,
4737 .ndo_set_mac_address = sky2_set_mac_address,
4738 .ndo_set_rx_mode = sky2_set_multicast,
4739 .ndo_change_mtu = sky2_change_mtu,
4740 .ndo_fix_features = sky2_fix_features,
4741 .ndo_set_features = sky2_set_features,
4742 .ndo_tx_timeout = sky2_tx_timeout,
4743 .ndo_get_stats64 = sky2_get_stats,
4744 },
4745 };
4746
4747 /* Initialize network device */
4748 static struct net_device *sky2_init_netdev(struct sky2_hw *hw, unsigned port,
4749 int highmem, int wol)
4750 {
4751 struct sky2_port *sky2;
4752 struct net_device *dev = alloc_etherdev(sizeof(*sky2));
4753 const void *iap;
4754
4755 if (!dev)
4756 return NULL;
4757
4758 SET_NETDEV_DEV(dev, &hw->pdev->dev);
4759 dev->irq = hw->pdev->irq;
4760 dev->ethtool_ops = &sky2_ethtool_ops;
4761 dev->watchdog_timeo = TX_WATCHDOG;
4762 dev->netdev_ops = &sky2_netdev_ops[port];
4763
4764 sky2 = netdev_priv(dev);
4765 sky2->netdev = dev;
4766 sky2->hw = hw;
4767 sky2->msg_enable = netif_msg_init(debug, default_msg);
4768
4769 u64_stats_init(&sky2->tx_stats.syncp);
4770 u64_stats_init(&sky2->rx_stats.syncp);
4771
4772 /* Auto speed and flow control */
4773 sky2->flags = SKY2_FLAG_AUTO_SPEED | SKY2_FLAG_AUTO_PAUSE;
4774 if (hw->chip_id != CHIP_ID_YUKON_XL)
4775 dev->hw_features |= NETIF_F_RXCSUM;
4776
4777 sky2->flow_mode = FC_BOTH;
4778
4779 sky2->duplex = -1;
4780 sky2->speed = -1;
4781 sky2->advertising = sky2_supported_modes(hw);
4782 sky2->wol = wol;
4783
4784 spin_lock_init(&sky2->phy_lock);
4785
4786 sky2->tx_pending = TX_DEF_PENDING;
4787 sky2->tx_ring_size = roundup_ring_size(TX_DEF_PENDING);
4788 sky2->rx_pending = RX_DEF_PENDING;
4789
4790 hw->dev[port] = dev;
4791
4792 sky2->port = port;
4793
4794 dev->hw_features |= NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_TSO;
4795
4796 if (highmem)
4797 dev->features |= NETIF_F_HIGHDMA;
4798
4799 /* Enable receive hashing unless hardware is known broken */
4800 if (!(hw->flags & SKY2_HW_RSS_BROKEN))
4801 dev->hw_features |= NETIF_F_RXHASH;
4802
4803 if (!(hw->flags & SKY2_HW_VLAN_BROKEN)) {
4804 dev->hw_features |= NETIF_F_HW_VLAN_CTAG_TX |
4805 NETIF_F_HW_VLAN_CTAG_RX;
4806 dev->vlan_features |= SKY2_VLAN_OFFLOADS;
4807 }
4808
4809 dev->features |= dev->hw_features;
4810
4811 /* try to get mac address in the following order:
4812 * 1) from device tree data
4813 * 2) from internal registers set by bootloader
4814 */
4815 iap = of_get_mac_address(hw->pdev->dev.of_node);
4816 if (iap)
4817 memcpy(dev->dev_addr, iap, ETH_ALEN);
4818 else
4819 memcpy_fromio(dev->dev_addr, hw->regs + B2_MAC_1 + port * 8,
4820 ETH_ALEN);
4821
4822 /* if the address is invalid, use a random value */
4823 if (!is_valid_ether_addr(dev->dev_addr)) {
4824 struct sockaddr sa = { AF_UNSPEC };
4825
4826 netdev_warn(dev,
4827 "Invalid MAC address, defaulting to random\n");
4828 eth_hw_addr_random(dev);
4829 memcpy(sa.sa_data, dev->dev_addr, ETH_ALEN);
4830 if (sky2_set_mac_address(dev, &sa))
4831 netdev_warn(dev, "Failed to set MAC address.\n");
4832 }
4833
4834 return dev;
4835 }
4836
4837 static void sky2_show_addr(struct net_device *dev)
4838 {
4839 const struct sky2_port *sky2 = netdev_priv(dev);
4840
4841 netif_info(sky2, probe, dev, "addr %pM\n", dev->dev_addr);
4842 }
4843
4844 /* Handle software interrupt used during MSI test */
4845 static irqreturn_t sky2_test_intr(int irq, void *dev_id)
4846 {
4847 struct sky2_hw *hw = dev_id;
4848 u32 status = sky2_read32(hw, B0_Y2_SP_ISRC2);
4849
4850 if (status == 0)
4851 return IRQ_NONE;
4852
4853 if (status & Y2_IS_IRQ_SW) {
4854 hw->flags |= SKY2_HW_USE_MSI;
4855 wake_up(&hw->msi_wait);
4856 sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ);
4857 }
4858 sky2_write32(hw, B0_Y2_SP_ICR, 2);
4859
4860 return IRQ_HANDLED;
4861 }
4862
4863 /* Test interrupt path by forcing a a software IRQ */
4864 static int sky2_test_msi(struct sky2_hw *hw)
4865 {
4866 struct pci_dev *pdev = hw->pdev;
4867 int err;
4868
4869 init_waitqueue_head(&hw->msi_wait);
4870
4871 err = request_irq(pdev->irq, sky2_test_intr, 0, DRV_NAME, hw);
4872 if (err) {
4873 dev_err(&pdev->dev, "cannot assign irq %d\n", pdev->irq);
4874 return err;
4875 }
4876
4877 sky2_write32(hw, B0_IMSK, Y2_IS_IRQ_SW);
4878
4879 sky2_write8(hw, B0_CTST, CS_ST_SW_IRQ);
4880 sky2_read8(hw, B0_CTST);
4881
4882 wait_event_timeout(hw->msi_wait, (hw->flags & SKY2_HW_USE_MSI), HZ/10);
4883
4884 if (!(hw->flags & SKY2_HW_USE_MSI)) {
4885 /* MSI test failed, go back to INTx mode */
4886 dev_info(&pdev->dev, "No interrupt generated using MSI, "
4887 "switching to INTx mode.\n");
4888
4889 err = -EOPNOTSUPP;
4890 sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ);
4891 }
4892
4893 sky2_write32(hw, B0_IMSK, 0);
4894 sky2_read32(hw, B0_IMSK);
4895
4896 free_irq(pdev->irq, hw);
4897
4898 return err;
4899 }
4900
4901 /* This driver supports yukon2 chipset only */
4902 static const char *sky2_name(u8 chipid, char *buf, int sz)
4903 {
4904 const char *name[] = {
4905 "XL", /* 0xb3 */
4906 "EC Ultra", /* 0xb4 */
4907 "Extreme", /* 0xb5 */
4908 "EC", /* 0xb6 */
4909 "FE", /* 0xb7 */
4910 "FE+", /* 0xb8 */
4911 "Supreme", /* 0xb9 */
4912 "UL 2", /* 0xba */
4913 "Unknown", /* 0xbb */
4914 "Optima", /* 0xbc */
4915 "OptimaEEE", /* 0xbd */
4916 "Optima 2", /* 0xbe */
4917 };
4918
4919 if (chipid >= CHIP_ID_YUKON_XL && chipid <= CHIP_ID_YUKON_OP_2)
4920 strncpy(buf, name[chipid - CHIP_ID_YUKON_XL], sz);
4921 else
4922 snprintf(buf, sz, "(chip %#x)", chipid);
4923 return buf;
4924 }
4925
4926 static int sky2_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
4927 {
4928 struct net_device *dev, *dev1;
4929 struct sky2_hw *hw;
4930 int err, using_dac = 0, wol_default;
4931 u32 reg;
4932 char buf1[16];
4933
4934 err = pci_enable_device(pdev);
4935 if (err) {
4936 dev_err(&pdev->dev, "cannot enable PCI device\n");
4937 goto err_out;
4938 }
4939
4940 /* Get configuration information
4941 * Note: only regular PCI config access once to test for HW issues
4942 * other PCI access through shared memory for speed and to
4943 * avoid MMCONFIG problems.
4944 */
4945 err = pci_read_config_dword(pdev, PCI_DEV_REG2, &reg);
4946 if (err) {
4947 dev_err(&pdev->dev, "PCI read config failed\n");
4948 goto err_out_disable;
4949 }
4950
4951 if (~reg == 0) {
4952 dev_err(&pdev->dev, "PCI configuration read error\n");
4953 err = -EIO;
4954 goto err_out_disable;
4955 }
4956
4957 err = pci_request_regions(pdev, DRV_NAME);
4958 if (err) {
4959 dev_err(&pdev->dev, "cannot obtain PCI resources\n");
4960 goto err_out_disable;
4961 }
4962
4963 pci_set_master(pdev);
4964
4965 if (sizeof(dma_addr_t) > sizeof(u32) &&
4966 !(err = pci_set_dma_mask(pdev, DMA_BIT_MASK(64)))) {
4967 using_dac = 1;
4968 err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
4969 if (err < 0) {
4970 dev_err(&pdev->dev, "unable to obtain 64 bit DMA "
4971 "for consistent allocations\n");
4972 goto err_out_free_regions;
4973 }
4974 } else {
4975 err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
4976 if (err) {
4977 dev_err(&pdev->dev, "no usable DMA configuration\n");
4978 goto err_out_free_regions;
4979 }
4980 }
4981
4982
4983 #ifdef __BIG_ENDIAN
4984 /* The sk98lin vendor driver uses hardware byte swapping but
4985 * this driver uses software swapping.
4986 */
4987 reg &= ~PCI_REV_DESC;
4988 err = pci_write_config_dword(pdev, PCI_DEV_REG2, reg);
4989 if (err) {
4990 dev_err(&pdev->dev, "PCI write config failed\n");
4991 goto err_out_free_regions;
4992 }
4993 #endif
4994
4995 wol_default = device_may_wakeup(&pdev->dev) ? WAKE_MAGIC : 0;
4996
4997 err = -ENOMEM;
4998
4999 hw = kzalloc(sizeof(*hw) + strlen(DRV_NAME "@pci:")
5000 + strlen(pci_name(pdev)) + 1, GFP_KERNEL);
5001 if (!hw)
5002 goto err_out_free_regions;
5003
5004 hw->pdev = pdev;
5005 sprintf(hw->irq_name, DRV_NAME "@pci:%s", pci_name(pdev));
5006
5007 hw->regs = ioremap_nocache(pci_resource_start(pdev, 0), 0x4000);
5008 if (!hw->regs) {
5009 dev_err(&pdev->dev, "cannot map device registers\n");
5010 goto err_out_free_hw;
5011 }
5012
5013 err = sky2_init(hw);
5014 if (err)
5015 goto err_out_iounmap;
5016
5017 /* ring for status responses */
5018 hw->st_size = hw->ports * roundup_pow_of_two(3*RX_MAX_PENDING + TX_MAX_PENDING);
5019 hw->st_le = pci_alloc_consistent(pdev, hw->st_size * sizeof(struct sky2_status_le),
5020 &hw->st_dma);
5021 if (!hw->st_le) {
5022 err = -ENOMEM;
5023 goto err_out_reset;
5024 }
5025
5026 dev_info(&pdev->dev, "Yukon-2 %s chip revision %d\n",
5027 sky2_name(hw->chip_id, buf1, sizeof(buf1)), hw->chip_rev);
5028
5029 sky2_reset(hw);
5030
5031 dev = sky2_init_netdev(hw, 0, using_dac, wol_default);
5032 if (!dev) {
5033 err = -ENOMEM;
5034 goto err_out_free_pci;
5035 }
5036
5037 if (!disable_msi && pci_enable_msi(pdev) == 0) {
5038 err = sky2_test_msi(hw);
5039 if (err) {
5040 pci_disable_msi(pdev);
5041 if (err != -EOPNOTSUPP)
5042 goto err_out_free_netdev;
5043 }
5044 }
5045
5046 netif_napi_add(dev, &hw->napi, sky2_poll, NAPI_WEIGHT);
5047
5048 err = register_netdev(dev);
5049 if (err) {
5050 dev_err(&pdev->dev, "cannot register net device\n");
5051 goto err_out_free_netdev;
5052 }
5053
5054 netif_carrier_off(dev);
5055
5056 sky2_show_addr(dev);
5057
5058 if (hw->ports > 1) {
5059 dev1 = sky2_init_netdev(hw, 1, using_dac, wol_default);
5060 if (!dev1) {
5061 err = -ENOMEM;
5062 goto err_out_unregister;
5063 }
5064
5065 err = register_netdev(dev1);
5066 if (err) {
5067 dev_err(&pdev->dev, "cannot register second net device\n");
5068 goto err_out_free_dev1;
5069 }
5070
5071 err = sky2_setup_irq(hw, hw->irq_name);
5072 if (err)
5073 goto err_out_unregister_dev1;
5074
5075 sky2_show_addr(dev1);
5076 }
5077
5078 setup_timer(&hw->watchdog_timer, sky2_watchdog, (unsigned long) hw);
5079 INIT_WORK(&hw->restart_work, sky2_restart);
5080
5081 pci_set_drvdata(pdev, hw);
5082 pdev->d3_delay = 150;
5083
5084 return 0;
5085
5086 err_out_unregister_dev1:
5087 unregister_netdev(dev1);
5088 err_out_free_dev1:
5089 free_netdev(dev1);
5090 err_out_unregister:
5091 unregister_netdev(dev);
5092 err_out_free_netdev:
5093 if (hw->flags & SKY2_HW_USE_MSI)
5094 pci_disable_msi(pdev);
5095 free_netdev(dev);
5096 err_out_free_pci:
5097 pci_free_consistent(pdev, hw->st_size * sizeof(struct sky2_status_le),
5098 hw->st_le, hw->st_dma);
5099 err_out_reset:
5100 sky2_write8(hw, B0_CTST, CS_RST_SET);
5101 err_out_iounmap:
5102 iounmap(hw->regs);
5103 err_out_free_hw:
5104 kfree(hw);
5105 err_out_free_regions:
5106 pci_release_regions(pdev);
5107 err_out_disable:
5108 pci_disable_device(pdev);
5109 err_out:
5110 return err;
5111 }
5112
5113 static void sky2_remove(struct pci_dev *pdev)
5114 {
5115 struct sky2_hw *hw = pci_get_drvdata(pdev);
5116 int i;
5117
5118 if (!hw)
5119 return;
5120
5121 del_timer_sync(&hw->watchdog_timer);
5122 cancel_work_sync(&hw->restart_work);
5123
5124 for (i = hw->ports-1; i >= 0; --i)
5125 unregister_netdev(hw->dev[i]);
5126
5127 sky2_write32(hw, B0_IMSK, 0);
5128 sky2_read32(hw, B0_IMSK);
5129
5130 sky2_power_aux(hw);
5131
5132 sky2_write8(hw, B0_CTST, CS_RST_SET);
5133 sky2_read8(hw, B0_CTST);
5134
5135 if (hw->ports > 1) {
5136 napi_disable(&hw->napi);
5137 free_irq(pdev->irq, hw);
5138 }
5139
5140 if (hw->flags & SKY2_HW_USE_MSI)
5141 pci_disable_msi(pdev);
5142 pci_free_consistent(pdev, hw->st_size * sizeof(struct sky2_status_le),
5143 hw->st_le, hw->st_dma);
5144 pci_release_regions(pdev);
5145 pci_disable_device(pdev);
5146
5147 for (i = hw->ports-1; i >= 0; --i)
5148 free_netdev(hw->dev[i]);
5149
5150 iounmap(hw->regs);
5151 kfree(hw);
5152 }
5153
5154 static int sky2_suspend(struct device *dev)
5155 {
5156 struct pci_dev *pdev = to_pci_dev(dev);
5157 struct sky2_hw *hw = pci_get_drvdata(pdev);
5158 int i;
5159
5160 if (!hw)
5161 return 0;
5162
5163 del_timer_sync(&hw->watchdog_timer);
5164 cancel_work_sync(&hw->restart_work);
5165
5166 rtnl_lock();
5167
5168 sky2_all_down(hw);
5169 for (i = 0; i < hw->ports; i++) {
5170 struct net_device *dev = hw->dev[i];
5171 struct sky2_port *sky2 = netdev_priv(dev);
5172
5173 if (sky2->wol)
5174 sky2_wol_init(sky2);
5175 }
5176
5177 sky2_power_aux(hw);
5178 rtnl_unlock();
5179
5180 return 0;
5181 }
5182
5183 #ifdef CONFIG_PM_SLEEP
5184 static int sky2_resume(struct device *dev)
5185 {
5186 struct pci_dev *pdev = to_pci_dev(dev);
5187 struct sky2_hw *hw = pci_get_drvdata(pdev);
5188 int err;
5189
5190 if (!hw)
5191 return 0;
5192
5193 /* Re-enable all clocks */
5194 err = pci_write_config_dword(pdev, PCI_DEV_REG3, 0);
5195 if (err) {
5196 dev_err(&pdev->dev, "PCI write config failed\n");
5197 goto out;
5198 }
5199
5200 rtnl_lock();
5201 sky2_reset(hw);
5202 sky2_all_up(hw);
5203 rtnl_unlock();
5204
5205 return 0;
5206 out:
5207
5208 dev_err(&pdev->dev, "resume failed (%d)\n", err);
5209 pci_disable_device(pdev);
5210 return err;
5211 }
5212
5213 static SIMPLE_DEV_PM_OPS(sky2_pm_ops, sky2_suspend, sky2_resume);
5214 #define SKY2_PM_OPS (&sky2_pm_ops)
5215
5216 #else
5217
5218 #define SKY2_PM_OPS NULL
5219 #endif
5220
5221 static void sky2_shutdown(struct pci_dev *pdev)
5222 {
5223 sky2_suspend(&pdev->dev);
5224 pci_wake_from_d3(pdev, device_may_wakeup(&pdev->dev));
5225 pci_set_power_state(pdev, PCI_D3hot);
5226 }
5227
5228 static struct pci_driver sky2_driver = {
5229 .name = DRV_NAME,
5230 .id_table = sky2_id_table,
5231 .probe = sky2_probe,
5232 .remove = sky2_remove,
5233 .shutdown = sky2_shutdown,
5234 .driver.pm = SKY2_PM_OPS,
5235 };
5236
5237 static int __init sky2_init_module(void)
5238 {
5239 pr_info("driver version " DRV_VERSION "\n");
5240
5241 sky2_debug_init();
5242 return pci_register_driver(&sky2_driver);
5243 }
5244
5245 static void __exit sky2_cleanup_module(void)
5246 {
5247 pci_unregister_driver(&sky2_driver);
5248 sky2_debug_cleanup();
5249 }
5250
5251 module_init(sky2_init_module);
5252 module_exit(sky2_cleanup_module);
5253
5254 MODULE_DESCRIPTION("Marvell Yukon 2 Gigabit Ethernet driver");
5255 MODULE_AUTHOR("Stephen Hemminger <shemminger@linux-foundation.org>");
5256 MODULE_LICENSE("GPL");
5257 MODULE_VERSION(DRV_VERSION);
Linux kernel - Deliverables
This page took 0.185993 seconds and 6 git commands to generate.