drivers/net/ethernet/xilinx/xilinx_axienet.h

   1 /*
   2  * Definitions for Xilinx Axi Ethernet device driver.
   3  *
   4  * Copyright (c) 2009 Secret Lab Technologies, Ltd.
   5  * Copyright (c) 2010 Xilinx, Inc. All rights reserved.
   6  * Copyright (c) 2012 Daniel Borkmann, <daniel.borkmann@tik.ee.ethz.ch>
   7  * Copyright (c) 2012 Ariane Keller, <ariane.keller@tik.ee.ethz.ch>
   8  */
   9
  10 #ifndef XILINX_AXIENET_H
  11 #define XILINX_AXIENET_H
  12
  13 #include <linux/netdevice.h>
  14 #include <linux/spinlock.h>
  15 #include <linux/interrupt.h>
  16
  17 /* Packet size info */
  18 #define XAE_HDR_SIZE                    14 /* Size of Ethernet header */
  19 #define XAE_HDR_VLAN_SIZE               18 /* Size of an Ethernet hdr + VLAN */
  20 #define XAE_TRL_SIZE                     4 /* Size of Ethernet trailer (FCS) */
  21 #define XAE_MTU                       1500 /* Max MTU of an Ethernet frame */
  22 #define XAE_JUMBO_MTU                 9000 /* Max MTU of a jumbo Eth. frame */
  23
  24 #define XAE_MAX_FRAME_SIZE       (XAE_MTU + XAE_HDR_SIZE + XAE_TRL_SIZE)
  25 #define XAE_MAX_VLAN_FRAME_SIZE  (XAE_MTU + XAE_HDR_VLAN_SIZE + XAE_TRL_SIZE)
  26 #define XAE_MAX_JUMBO_FRAME_SIZE (XAE_JUMBO_MTU + XAE_HDR_SIZE + XAE_TRL_SIZE)
  27
  28 /* Configuration options */
  29
  30 /* Accept all incoming packets. Default: disabled (cleared) */
  31 #define XAE_OPTION_PROMISC                      (1 << 0)
  32
  33 /* Jumbo frame support for Tx & Rx. Default: disabled (cleared) */
  34 #define XAE_OPTION_JUMBO                        (1 << 1)
  35
  36 /* VLAN Rx & Tx frame support. Default: disabled (cleared) */
  37 #define XAE_OPTION_VLAN                         (1 << 2)
  38
  39 /* Enable recognition of flow control frames on Rx. Default: enabled (set) */
  40 #define XAE_OPTION_FLOW_CONTROL                 (1 << 4)
  41
  42 /* Strip FCS and PAD from incoming frames. Note: PAD from VLAN frames is not
  43  * stripped. Default: disabled (set) */
  44 #define XAE_OPTION_FCS_STRIP                    (1 << 5)
  45
  46 /* Generate FCS field and add PAD automatically for outgoing frames.
  47  * Default: enabled (set) */
  48 #define XAE_OPTION_FCS_INSERT                   (1 << 6)
  49
  50 /* Enable Length/Type error checking for incoming frames. When this option is
  51  * set, the MAC will filter frames that have a mismatched type/length field
  52  * and if XAE_OPTION_REPORT_RXERR is set, the user is notified when these
  53  * types of frames are encountered. When this option is cleared, the MAC will
  54  * allow these types of frames to be received. Default: enabled (set) */
  55 #define XAE_OPTION_LENTYPE_ERR                  (1 << 7)
  56
  57 /* Enable the transmitter. Default: enabled (set) */
  58 #define XAE_OPTION_TXEN                         (1 << 11)
  59
  60 /*  Enable the receiver. Default: enabled (set) */
  61 #define XAE_OPTION_RXEN                         (1 << 12)
  62
  63 /*  Default options set when device is initialized or reset */
  64 #define XAE_OPTION_DEFAULTS                                \
  65                                 (XAE_OPTION_TXEN |         \
  66                                  XAE_OPTION_FLOW_CONTROL | \
  67                                  XAE_OPTION_RXEN)
  68
  69 /* Axi DMA Register definitions */
  70
  71 #define XAXIDMA_TX_CR_OFFSET    0x00000000 /* Channel control */
  72 #define XAXIDMA_TX_SR_OFFSET    0x00000004 /* Status */
  73 #define XAXIDMA_TX_CDESC_OFFSET 0x00000008 /* Current descriptor pointer */
  74 #define XAXIDMA_TX_TDESC_OFFSET 0x00000010 /* Tail descriptor pointer */
  75
  76 #define XAXIDMA_RX_CR_OFFSET    0x00000030 /* Channel control */
  77 #define XAXIDMA_RX_SR_OFFSET    0x00000034 /* Status */
  78 #define XAXIDMA_RX_CDESC_OFFSET 0x00000038 /* Current descriptor pointer */
  79 #define XAXIDMA_RX_TDESC_OFFSET 0x00000040 /* Tail descriptor pointer */
  80
  81 #define XAXIDMA_CR_RUNSTOP_MASK 0x00000001 /* Start/stop DMA channel */
  82 #define XAXIDMA_CR_RESET_MASK   0x00000004 /* Reset DMA engine */
  83
  84 #define XAXIDMA_BD_NDESC_OFFSET         0x00 /* Next descriptor pointer */
  85 #define XAXIDMA_BD_BUFA_OFFSET          0x08 /* Buffer address */
  86 #define XAXIDMA_BD_CTRL_LEN_OFFSET      0x18 /* Control/buffer length */
  87 #define XAXIDMA_BD_STS_OFFSET           0x1C /* Status */
  88 #define XAXIDMA_BD_USR0_OFFSET          0x20 /* User IP specific word0 */
  89 #define XAXIDMA_BD_USR1_OFFSET          0x24 /* User IP specific word1 */
  90 #define XAXIDMA_BD_USR2_OFFSET          0x28 /* User IP specific word2 */
  91 #define XAXIDMA_BD_USR3_OFFSET          0x2C /* User IP specific word3 */
  92 #define XAXIDMA_BD_USR4_OFFSET          0x30 /* User IP specific word4 */
  93 #define XAXIDMA_BD_ID_OFFSET            0x34 /* Sw ID */
  94 #define XAXIDMA_BD_HAS_STSCNTRL_OFFSET  0x38 /* Whether has stscntrl strm */
  95 #define XAXIDMA_BD_HAS_DRE_OFFSET       0x3C /* Whether has DRE */
  96
  97 #define XAXIDMA_BD_HAS_DRE_SHIFT        8 /* Whether has DRE shift */
  98 #define XAXIDMA_BD_HAS_DRE_MASK         0xF00 /* Whether has DRE mask */
  99 #define XAXIDMA_BD_WORDLEN_MASK         0xFF /* Whether has DRE mask */
 100
 101 #define XAXIDMA_BD_CTRL_LENGTH_MASK     0x007FFFFF /* Requested len */
 102 #define XAXIDMA_BD_CTRL_TXSOF_MASK      0x08000000 /* First tx packet */
 103 #define XAXIDMA_BD_CTRL_TXEOF_MASK      0x04000000 /* Last tx packet */
 104 #define XAXIDMA_BD_CTRL_ALL_MASK        0x0C000000 /* All control bits */
 105
 106 #define XAXIDMA_DELAY_MASK              0xFF000000 /* Delay timeout counter */
 107 #define XAXIDMA_COALESCE_MASK           0x00FF0000 /* Coalesce counter */
 108
 109 #define XAXIDMA_DELAY_SHIFT             24
 110 #define XAXIDMA_COALESCE_SHIFT          16
 111
 112 #define XAXIDMA_IRQ_IOC_MASK            0x00001000 /* Completion intr */
 113 #define XAXIDMA_IRQ_DELAY_MASK          0x00002000 /* Delay interrupt */
 114 #define XAXIDMA_IRQ_ERROR_MASK          0x00004000 /* Error interrupt */
 115 #define XAXIDMA_IRQ_ALL_MASK            0x00007000 /* All interrupts */
 116
 117 /* Default TX/RX Threshold and waitbound values for SGDMA mode */
 118 #define XAXIDMA_DFT_TX_THRESHOLD        24
 119 #define XAXIDMA_DFT_TX_WAITBOUND        254
 120 #define XAXIDMA_DFT_RX_THRESHOLD        24
 121 #define XAXIDMA_DFT_RX_WAITBOUND        254
 122
 123 #define XAXIDMA_BD_CTRL_TXSOF_MASK      0x08000000 /* First tx packet */
 124 #define XAXIDMA_BD_CTRL_TXEOF_MASK      0x04000000 /* Last tx packet */
 125 #define XAXIDMA_BD_CTRL_ALL_MASK        0x0C000000 /* All control bits */
 126
 127 #define XAXIDMA_BD_STS_ACTUAL_LEN_MASK  0x007FFFFF /* Actual len */
 128 #define XAXIDMA_BD_STS_COMPLETE_MASK    0x80000000 /* Completed */
 129 #define XAXIDMA_BD_STS_DEC_ERR_MASK     0x40000000 /* Decode error */
 130 #define XAXIDMA_BD_STS_SLV_ERR_MASK     0x20000000 /* Slave error */
 131 #define XAXIDMA_BD_STS_INT_ERR_MASK     0x10000000 /* Internal err */
 132 #define XAXIDMA_BD_STS_ALL_ERR_MASK     0x70000000 /* All errors */
 133 #define XAXIDMA_BD_STS_RXSOF_MASK       0x08000000 /* First rx pkt */
 134 #define XAXIDMA_BD_STS_RXEOF_MASK       0x04000000 /* Last rx pkt */
 135 #define XAXIDMA_BD_STS_ALL_MASK         0xFC000000 /* All status bits */
 136
 137 #define XAXIDMA_BD_MINIMUM_ALIGNMENT    0x40
 138
 139 /* Axi Ethernet registers definition */
 140 #define XAE_RAF_OFFSET          0x00000000 /* Reset and Address filter */
 141 #define XAE_TPF_OFFSET          0x00000004 /* Tx Pause Frame */
 142 #define XAE_IFGP_OFFSET         0x00000008 /* Tx Inter-frame gap adjustment*/
 143 #define XAE_IS_OFFSET           0x0000000C /* Interrupt status */
 144 #define XAE_IP_OFFSET           0x00000010 /* Interrupt pending */
 145 #define XAE_IE_OFFSET           0x00000014 /* Interrupt enable */
 146 #define XAE_TTAG_OFFSET         0x00000018 /* Tx VLAN TAG */
 147 #define XAE_RTAG_OFFSET         0x0000001C /* Rx VLAN TAG */
 148 #define XAE_UAWL_OFFSET         0x00000020 /* Unicast address word lower */
 149 #define XAE_UAWU_OFFSET         0x00000024 /* Unicast address word upper */
 150 #define XAE_TPID0_OFFSET        0x00000028 /* VLAN TPID0 register */
 151 #define XAE_TPID1_OFFSET        0x0000002C /* VLAN TPID1 register */
 152 #define XAE_PPST_OFFSET         0x00000030 /* PCS PMA Soft Temac Status Reg */
 153 #define XAE_RCW0_OFFSET         0x00000400 /* Rx Configuration Word 0 */
 154 #define XAE_RCW1_OFFSET         0x00000404 /* Rx Configuration Word 1 */
 155 #define XAE_TC_OFFSET           0x00000408 /* Tx Configuration */
 156 #define XAE_FCC_OFFSET          0x0000040C /* Flow Control Configuration */
 157 #define XAE_EMMC_OFFSET         0x00000410 /* EMAC mode configuration */
 158 #define XAE_PHYC_OFFSET         0x00000414 /* RGMII/SGMII configuration */
 159 #define XAE_MDIO_MC_OFFSET      0x00000500 /* MII Management Config */
 160 #define XAE_MDIO_MCR_OFFSET     0x00000504 /* MII Management Control */
 161 #define XAE_MDIO_MWD_OFFSET     0x00000508 /* MII Management Write Data */
 162 #define XAE_MDIO_MRD_OFFSET     0x0000050C /* MII Management Read Data */
 163 #define XAE_MDIO_MIS_OFFSET     0x00000600 /* MII Management Interrupt Status */
 164 #define XAE_MDIO_MIP_OFFSET     0x00000620 /* MII Mgmt Interrupt Pending
 165                                             * register offset */
 166 #define XAE_MDIO_MIE_OFFSET     0x00000640 /* MII Management Interrupt Enable
 167                                             * register offset */
 168 #define XAE_MDIO_MIC_OFFSET     0x00000660 /* MII Management Interrupt Clear
 169                                             * register offset. */
 170 #define XAE_UAW0_OFFSET         0x00000700 /* Unicast address word 0 */
 171 #define XAE_UAW1_OFFSET         0x00000704 /* Unicast address word 1 */
 172 #define XAE_FMI_OFFSET          0x00000708 /* Filter Mask Index */
 173 #define XAE_AF0_OFFSET          0x00000710 /* Address Filter 0 */
 174 #define XAE_AF1_OFFSET          0x00000714 /* Address Filter 1 */
 175
 176 #define XAE_TX_VLAN_DATA_OFFSET 0x00004000 /* TX VLAN data table address */
 177 #define XAE_RX_VLAN_DATA_OFFSET 0x00008000 /* RX VLAN data table address */
 178 #define XAE_MCAST_TABLE_OFFSET  0x00020000 /* Multicast table address */
 179
 180 /* Bit Masks for Axi Ethernet RAF register */
 181 #define XAE_RAF_MCSTREJ_MASK            0x00000002 /* Reject receive multicast
 182                                                     * destination address */
 183 #define XAE_RAF_BCSTREJ_MASK            0x00000004 /* Reject receive broadcast
 184                                                     * destination address */
 185 #define XAE_RAF_TXVTAGMODE_MASK         0x00000018 /* Tx VLAN TAG mode */
 186 #define XAE_RAF_RXVTAGMODE_MASK         0x00000060 /* Rx VLAN TAG mode */
 187 #define XAE_RAF_TXVSTRPMODE_MASK        0x00000180 /* Tx VLAN STRIP mode */
 188 #define XAE_RAF_RXVSTRPMODE_MASK        0x00000600 /* Rx VLAN STRIP mode */
 189 #define XAE_RAF_NEWFNCENBL_MASK         0x00000800 /* New function mode */
 190 #define XAE_RAF_EMULTIFLTRENBL_MASK     0x00001000 /* Exteneded Multicast
 191                                                     * Filtering mode
 192                                                     */
 193 #define XAE_RAF_STATSRST_MASK           0x00002000 /* Stats. Counter Reset */
 194 #define XAE_RAF_RXBADFRMEN_MASK         0x00004000 /* Recv Bad Frame Enable */
 195 #define XAE_RAF_TXVTAGMODE_SHIFT        3 /* Tx Tag mode shift bits */
 196 #define XAE_RAF_RXVTAGMODE_SHIFT        5 /* Rx Tag mode shift bits */
 197 #define XAE_RAF_TXVSTRPMODE_SHIFT       7 /* Tx strip mode shift bits*/
 198 #define XAE_RAF_RXVSTRPMODE_SHIFT       9 /* Rx Strip mode shift bits*/
 199
 200 /* Bit Masks for Axi Ethernet TPF and IFGP registers */
 201 #define XAE_TPF_TPFV_MASK               0x0000FFFF /* Tx pause frame value */
 202 #define XAE_IFGP0_IFGP_MASK             0x0000007F /* Transmit inter-frame
 203                                                     * gap adjustment value */
 204
 205 /* Bit Masks for Axi Ethernet IS, IE and IP registers, Same masks apply
 206  * for all 3 registers. */
 207 #define XAE_INT_HARDACSCMPLT_MASK       0x00000001 /* Hard register access
 208                                                     * complete */
 209 #define XAE_INT_AUTONEG_MASK            0x00000002 /* Auto negotiation
 210                                                     * complete */
 211 #define XAE_INT_RXCMPIT_MASK            0x00000004 /* Rx complete */
 212 #define XAE_INT_RXRJECT_MASK            0x00000008 /* Rx frame rejected */
 213 #define XAE_INT_RXFIFOOVR_MASK          0x00000010 /* Rx fifo overrun */
 214 #define XAE_INT_TXCMPIT_MASK            0x00000020 /* Tx complete */
 215 #define XAE_INT_RXDCMLOCK_MASK          0x00000040 /* Rx Dcm Lock */
 216 #define XAE_INT_MGTRDY_MASK             0x00000080 /* MGT clock Lock */
 217 #define XAE_INT_PHYRSTCMPLT_MASK        0x00000100 /* Phy Reset complete */
 218 #define XAE_INT_ALL_MASK                0x0000003F /* All the ints */
 219
 220 #define XAE_INT_RECV_ERROR_MASK                         \
 221         (XAE_INT_RXRJECT_MASK | XAE_INT_RXFIFOOVR_MASK) /* INT bits that
 222                                                          * indicate receive
 223                                                          * errors */
 224
 225 /* Bit masks for Axi Ethernet VLAN TPID Word 0 register */
 226 #define XAE_TPID_0_MASK         0x0000FFFF /* TPID 0 */
 227 #define XAE_TPID_1_MASK         0xFFFF0000 /* TPID 1 */
 228
 229 /* Bit masks for Axi Ethernet VLAN TPID Word 1 register */
 230 #define XAE_TPID_2_MASK         0x0000FFFF /* TPID 0 */
 231 #define XAE_TPID_3_MASK         0xFFFF0000 /* TPID 1 */
 232
 233 /* Bit masks for Axi Ethernet RCW1 register */
 234 #define XAE_RCW1_RST_MASK       0x80000000 /* Reset */
 235 #define XAE_RCW1_JUM_MASK       0x40000000 /* Jumbo frame enable */
 236 #define XAE_RCW1_FCS_MASK       0x20000000 /* In-Band FCS enable
 237                                             * (FCS not stripped) */
 238 #define XAE_RCW1_RX_MASK        0x10000000 /* Receiver enable */
 239 #define XAE_RCW1_VLAN_MASK      0x08000000 /* VLAN frame enable */
 240 #define XAE_RCW1_LT_DIS_MASK    0x02000000 /* Length/type field valid check
 241                                             * disable */
 242 #define XAE_RCW1_CL_DIS_MASK    0x01000000 /* Control frame Length check
 243                                             * disable */
 244 #define XAE_RCW1_PAUSEADDR_MASK 0x0000FFFF /* Pause frame source address
 245                                             * bits [47:32]. Bits [31:0] are
 246                                             * stored in register RCW0 */
 247
 248 /* Bit masks for Axi Ethernet TC register */
 249 #define XAE_TC_RST_MASK         0x80000000 /* Reset */
 250 #define XAE_TC_JUM_MASK         0x40000000 /* Jumbo frame enable */
 251 #define XAE_TC_FCS_MASK         0x20000000 /* In-Band FCS enable
 252                                             * (FCS not generated) */
 253 #define XAE_TC_TX_MASK          0x10000000 /* Transmitter enable */
 254 #define XAE_TC_VLAN_MASK        0x08000000 /* VLAN frame enable */
 255 #define XAE_TC_IFG_MASK         0x02000000 /* Inter-frame gap adjustment
 256                                             * enable */
 257
 258 /* Bit masks for Axi Ethernet FCC register */
 259 #define XAE_FCC_FCRX_MASK       0x20000000 /* Rx flow control enable */
 260 #define XAE_FCC_FCTX_MASK       0x40000000 /* Tx flow control enable */
 261
 262 /* Bit masks for Axi Ethernet EMMC register */
 263 #define XAE_EMMC_LINKSPEED_MASK 0xC0000000 /* Link speed */
 264 #define XAE_EMMC_RGMII_MASK     0x20000000 /* RGMII mode enable */
 265 #define XAE_EMMC_SGMII_MASK     0x10000000 /* SGMII mode enable */
 266 #define XAE_EMMC_GPCS_MASK      0x08000000 /* 1000BaseX mode enable */
 267 #define XAE_EMMC_HOST_MASK      0x04000000 /* Host interface enable */
 268 #define XAE_EMMC_TX16BIT        0x02000000 /* 16 bit Tx client enable */
 269 #define XAE_EMMC_RX16BIT        0x01000000 /* 16 bit Rx client enable */
 270 #define XAE_EMMC_LINKSPD_10     0x00000000 /* Link Speed mask for 10 Mbit */
 271 #define XAE_EMMC_LINKSPD_100    0x40000000 /* Link Speed mask for 100 Mbit */
 272 #define XAE_EMMC_LINKSPD_1000   0x80000000 /* Link Speed mask for 1000 Mbit */
 273
 274 /* Bit masks for Axi Ethernet PHYC register */
 275 #define XAE_PHYC_SGMIILINKSPEED_MASK    0xC0000000 /* SGMII link speed mask*/
 276 #define XAE_PHYC_RGMIILINKSPEED_MASK    0x0000000C /* RGMII link speed */
 277 #define XAE_PHYC_RGMIIHD_MASK           0x00000002 /* RGMII Half-duplex */
 278 #define XAE_PHYC_RGMIILINK_MASK         0x00000001 /* RGMII link status */
 279 #define XAE_PHYC_RGLINKSPD_10           0x00000000 /* RGMII link 10 Mbit */
 280 #define XAE_PHYC_RGLINKSPD_100          0x00000004 /* RGMII link 100 Mbit */
 281 #define XAE_PHYC_RGLINKSPD_1000         0x00000008 /* RGMII link 1000 Mbit */
 282 #define XAE_PHYC_SGLINKSPD_10           0x00000000 /* SGMII link 10 Mbit */
 283 #define XAE_PHYC_SGLINKSPD_100          0x40000000 /* SGMII link 100 Mbit */
 284 #define XAE_PHYC_SGLINKSPD_1000         0x80000000 /* SGMII link 1000 Mbit */
 285
 286 /* Bit masks for Axi Ethernet MDIO interface MC register */
 287 #define XAE_MDIO_MC_MDIOEN_MASK         0x00000040 /* MII management enable */
 288 #define XAE_MDIO_MC_CLOCK_DIVIDE_MAX    0x3F       /* Maximum MDIO divisor */
 289
 290 /* Bit masks for Axi Ethernet MDIO interface MCR register */
 291 #define XAE_MDIO_MCR_PHYAD_MASK         0x1F000000 /* Phy Address Mask */
 292 #define XAE_MDIO_MCR_PHYAD_SHIFT        24         /* Phy Address Shift */
 293 #define XAE_MDIO_MCR_REGAD_MASK         0x001F0000 /* Reg Address Mask */
 294 #define XAE_MDIO_MCR_REGAD_SHIFT        16         /* Reg Address Shift */
 295 #define XAE_MDIO_MCR_OP_MASK            0x0000C000 /* Operation Code Mask */
 296 #define XAE_MDIO_MCR_OP_SHIFT           13         /* Operation Code Shift */
 297 #define XAE_MDIO_MCR_OP_READ_MASK       0x00008000 /* Op Code Read Mask */
 298 #define XAE_MDIO_MCR_OP_WRITE_MASK      0x00004000 /* Op Code Write Mask */
 299 #define XAE_MDIO_MCR_INITIATE_MASK      0x00000800 /* Ready Mask */
 300 #define XAE_MDIO_MCR_READY_MASK         0x00000080 /* Ready Mask */
 301
 302 /* Bit masks for Axi Ethernet MDIO interface MIS, MIP, MIE, MIC registers */
 303 #define XAE_MDIO_INT_MIIM_RDY_MASK      0x00000001 /* MIIM Interrupt */
 304
 305 /* Bit masks for Axi Ethernet UAW1 register */
 306 #define XAE_UAW1_UNICASTADDR_MASK       0x0000FFFF /* Station address bits
 307                                                     * [47:32]; Station address
 308                                                     * bits [31:0] are stored in
 309                                                     * register UAW0 */
 310
 311 /* Bit masks for Axi Ethernet FMI register */
 312 #define XAE_FMI_PM_MASK                 0x80000000 /* Promis. mode enable */
 313 #define XAE_FMI_IND_MASK                0x00000003 /* Index Mask */
 314
 315 #define XAE_MDIO_DIV_DFT                29 /* Default MDIO clock divisor */
 316
 317 /* Defines for different options for C_PHY_TYPE parameter in Axi Ethernet IP */
 318 #define XAE_PHY_TYPE_MII                0
 319 #define XAE_PHY_TYPE_GMII               1
 320 #define XAE_PHY_TYPE_RGMII_1_3          2
 321 #define XAE_PHY_TYPE_RGMII_2_0          3
 322 #define XAE_PHY_TYPE_SGMII              4
 323 #define XAE_PHY_TYPE_1000BASE_X         5
 324
 325 #define XAE_MULTICAST_CAM_TABLE_NUM     4 /* Total number of entries in the
 326                                            * hardware multicast table. */
 327
 328 /* Axi Ethernet Synthesis features */
 329 #define XAE_FEATURE_PARTIAL_RX_CSUM     (1 << 0)
 330 #define XAE_FEATURE_PARTIAL_TX_CSUM     (1 << 1)
 331 #define XAE_FEATURE_FULL_RX_CSUM        (1 << 2)
 332 #define XAE_FEATURE_FULL_TX_CSUM        (1 << 3)
 333
 334 #define XAE_NO_CSUM_OFFLOAD             0
 335
 336 #define XAE_FULL_CSUM_STATUS_MASK       0x00000038
 337 #define XAE_IP_UDP_CSUM_VALIDATED       0x00000003
 338 #define XAE_IP_TCP_CSUM_VALIDATED       0x00000002
 339
 340 #define DELAY_OF_ONE_MILLISEC           1000
 341
 342 /**
 343  * struct axidma_bd - Axi Dma buffer descriptor layout
 344  * @next:         MM2S/S2MM Next Descriptor Pointer
 345  * @reserved1:    Reserved and not used
 346  * @phys:         MM2S/S2MM Buffer Address
 347  * @reserved2:    Reserved and not used
 348  * @reserved3:    Reserved and not used
 349  * @reserved4:    Reserved and not used
 350  * @cntrl:        MM2S/S2MM Control value
 351  * @status:       MM2S/S2MM Status value
 352  * @app0:         MM2S/S2MM User Application Field 0.
 353  * @app1:         MM2S/S2MM User Application Field 1.
 354  * @app2:         MM2S/S2MM User Application Field 2.
 355  * @app3:         MM2S/S2MM User Application Field 3.
 356  * @app4:         MM2S/S2MM User Application Field 4.
 357  * @sw_id_offset: MM2S/S2MM Sw ID
 358  * @reserved5:    Reserved and not used
 359  * @reserved6:    Reserved and not used
 360  */
 361 struct axidma_bd {
 362         u32 next;       /* Physical address of next buffer descriptor */
 363         u32 reserved1;
 364         u32 phys;
 365         u32 reserved2;
 366         u32 reserved3;
 367         u32 reserved4;
 368         u32 cntrl;
 369         u32 status;
 370         u32 app0;
 371         u32 app1;       /* TX start << 16 | insert */
 372         u32 app2;       /* TX csum seed */
 373         u32 app3;
 374         u32 app4;
 375         u32 sw_id_offset;
 376         u32 reserved5;
 377         u32 reserved6;
 378 };
 379
 380 /**
 381  * struct axienet_local - axienet private per device data
 382  * @ndev:       Pointer for net_device to which it will be attached.
 383  * @dev:        Pointer to device structure
 384  * @phy_dev:    Pointer to PHY device structure attached to the axienet_local
 385  * @phy_node:   Pointer to device node structure
 386  * @mii_bus:    Pointer to MII bus structure
 387  * @mdio_irqs:  IRQs table for MDIO bus required in mii_bus structure
 388  * @regs:       Base address for the axienet_local device address space
 389  * @dma_regs:   Base address for the axidma device address space
 390  * @dma_err_tasklet: Tasklet structure to process Axi DMA errors
 391  * @tx_irq:     Axidma TX IRQ number
 392  * @rx_irq:     Axidma RX IRQ number
 393  * @temac_type: axienet type to identify between soft and hard temac
 394  * @phy_type:   Phy type to identify between MII/GMII/RGMII/SGMII/1000 Base-X
 395  * @options:    AxiEthernet option word
 396  * @last_link:  Phy link state in which the PHY was negotiated earlier
 397  * @features:   Stores the extended features supported by the axienet hw
 398  * @tx_bd_v:    Virtual address of the TX buffer descriptor ring
 399  * @tx_bd_p:    Physical address(start address) of the TX buffer descr. ring
 400  * @rx_bd_v:    Virtual address of the RX buffer descriptor ring
 401  * @rx_bd_p:    Physical address(start address) of the RX buffer descr. ring
 402  * @tx_bd_ci:   Stores the index of the Tx buffer descriptor in the ring being
 403  *              accessed currently. Used while alloc. BDs before a TX starts
 404  * @tx_bd_tail: Stores the index of the Tx buffer descriptor in the ring being
 405  *              accessed currently. Used while processing BDs after the TX
 406  *              completed.
 407  * @rx_bd_ci:   Stores the index of the Rx buffer descriptor in the ring being
 408  *              accessed currently.
 409  * @max_frm_size: Stores the maximum size of the frame that can be that
 410  *                Txed/Rxed in the existing hardware. If jumbo option is
 411  *                supported, the maximum frame size would be 9k. Else it is
 412  *                1522 bytes (assuming support for basic VLAN)
 413  * @jumbo_support: Stores hardware configuration for jumbo support. If hardware
 414  *                 can handle jumbo packets, this entry will be 1, else 0.
 415  */
 416 struct axienet_local {
 417         struct net_device *ndev;
 418         struct device *dev;
 419
 420         /* Connection to PHY device */
 421         struct phy_device *phy_dev;     /* Pointer to PHY device */
 422         struct device_node *phy_node;
 423
 424         /* MDIO bus data */
 425         struct mii_bus *mii_bus;        /* MII bus reference */
 426         int mdio_irqs[PHY_MAX_ADDR];    /* IRQs table for MDIO bus */
 427
 428         /* IO registers, dma functions and IRQs */
 429         void __iomem *regs;
 430         void __iomem *dma_regs;
 431
 432         struct tasklet_struct dma_err_tasklet;
 433
 434         int tx_irq;
 435         int rx_irq;
 436         u32 temac_type;
 437         u32 phy_type;
 438
 439         u32 options;                    /* Current options word */
 440         u32 last_link;
 441         u32 features;
 442
 443         /* Buffer descriptors */
 444         struct axidma_bd *tx_bd_v;
 445         dma_addr_t tx_bd_p;
 446         struct axidma_bd *rx_bd_v;
 447         dma_addr_t rx_bd_p;
 448         u32 tx_bd_ci;
 449         u32 tx_bd_tail;
 450         u32 rx_bd_ci;
 451
 452         u32 max_frm_size;
 453         u32 jumbo_support;
 454
 455         int csum_offload_on_tx_path;
 456         int csum_offload_on_rx_path;
 457
 458         u32 coalesce_count_rx;
 459         u32 coalesce_count_tx;
 460 };
 461
 462 /**
 463  * struct axiethernet_option - Used to set axi ethernet hardware options
 464  * @opt:        Option to be set.
 465  * @reg:        Register offset to be written for setting the option
 466  * @m_or:       Mask to be ORed for setting the option in the register
 467  */
 468 struct axienet_option {
 469         u32 opt;
 470         u32 reg;
 471         u32 m_or;
 472 };
 473
 474 /**
 475  * axienet_ior - Memory mapped Axi Ethernet register read
 476  * @lp:         Pointer to axienet local structure
 477  * @offset:     Address offset from the base address of Axi Ethernet core
 478  *
 479  * returns: The contents of the Axi Ethernet register
 480  *
 481  * This function returns the contents of the corresponding register.
 482  */
 483 static inline u32 axienet_ior(struct axienet_local *lp, off_t offset)
 484 {
 485         return in_be32(lp->regs + offset);
 486 }
 487
 488 /**
 489  * axienet_iow - Memory mapped Axi Ethernet register write
 490  * @lp:         Pointer to axienet local structure
 491  * @offset:     Address offset from the base address of Axi Ethernet core
 492  * @value:      Value to be written into the Axi Ethernet register
 493  *
 494  * This function writes the desired value into the corresponding Axi Ethernet
 495  * register.
 496  */
 497 static inline void axienet_iow(struct axienet_local *lp, off_t offset,
 498                                u32 value)
 499 {
 500         out_be32((lp->regs + offset), value);
 501 }
 502
 503 /* Function prototypes visible in xilinx_axienet_mdio.c for other files */
 504 int axienet_mdio_setup(struct axienet_local *lp, struct device_node *np);
 505 int axienet_mdio_wait_until_ready(struct axienet_local *lp);
 506 void axienet_mdio_teardown(struct axienet_local *lp);
 507
 508 #endif /* XILINX_AXI_ENET_H */