2 Written 1994 by David C. Davies.
4 Copyright 1994 Digital Equipment Corporation.
6 This software may be used and distributed according to the terms of the
7 GNU General Public License, incorporated herein by reference.
9 The author may be reached as davies@wanton.lkg.dec.com or Digital
10 Equipment Corporation, 550 King Street, Littleton MA 01460.
12 =========================================================================
16 ** I/O Address Register Map
18 #define EWRK3_CSR iobase+0x00 /* Control and Status Register */
19 #define EWRK3_CR iobase+0x01 /* Control Register */
20 #define EWRK3_ICR iobase+0x02 /* Interrupt Control Register */
21 #define EWRK3_TSR iobase+0x03 /* Transmit Status Register */
22 #define EWRK3_RSVD1 iobase+0x04 /* RESERVED */
23 #define EWRK3_RSVD2 iobase+0x05 /* RESERVED */
24 #define EWRK3_FMQ iobase+0x06 /* Free Memory Queue */
25 #define EWRK3_FMQC iobase+0x07 /* Free Memory Queue Counter */
26 #define EWRK3_RQ iobase+0x08 /* Receive Queue */
27 #define EWRK3_RQC iobase+0x09 /* Receive Queue Counter */
28 #define EWRK3_TQ iobase+0x0a /* Transmit Queue */
29 #define EWRK3_TQC iobase+0x0b /* Transmit Queue Counter */
30 #define EWRK3_TDQ iobase+0x0c /* Transmit Done Queue */
31 #define EWRK3_TDQC iobase+0x0d /* Transmit Done Queue Counter */
32 #define EWRK3_PIR1 iobase+0x0e /* Page Index Register 1 */
33 #define EWRK3_PIR2 iobase+0x0f /* Page Index Register 2 */
34 #define EWRK3_DATA iobase+0x10 /* Data Register */
35 #define EWRK3_IOPR iobase+0x11 /* I/O Page Register */
36 #define EWRK3_IOBR iobase+0x12 /* I/O Base Register */
37 #define EWRK3_MPR iobase+0x13 /* Memory Page Register */
38 #define EWRK3_MBR iobase+0x14 /* Memory Base Register */
39 #define EWRK3_APROM iobase+0x15 /* Address PROM */
40 #define EWRK3_EPROM1 iobase+0x16 /* EEPROM Data Register 1 */
41 #define EWRK3_EPROM2 iobase+0x17 /* EEPROM Data Register 2 */
42 #define EWRK3_PAR0 iobase+0x18 /* Physical Address Register 0 */
43 #define EWRK3_PAR1 iobase+0x19 /* Physical Address Register 1 */
44 #define EWRK3_PAR2 iobase+0x1a /* Physical Address Register 2 */
45 #define EWRK3_PAR3 iobase+0x1b /* Physical Address Register 3 */
46 #define EWRK3_PAR4 iobase+0x1c /* Physical Address Register 4 */
47 #define EWRK3_PAR5 iobase+0x1d /* Physical Address Register 5 */
48 #define EWRK3_CMR iobase+0x1e /* Configuration/Management Register */
53 #define PAGE0_FMQ 0x000 /* Free Memory Queue */
54 #define PAGE0_RQ 0x080 /* Receive Queue */
55 #define PAGE0_TQ 0x100 /* Transmit Queue */
56 #define PAGE0_TDQ 0x180 /* Transmit Done Queue */
57 #define PAGE0_HTE 0x200 /* Hash Table Entries */
58 #define PAGE0_RSVD 0x240 /* RESERVED */
59 #define PAGE0_USRD 0x600 /* User Data */
62 ** Control and Status Register bit definitions (EWRK3_CSR)
64 #define CSR_RA 0x80 /* Runt Accept */
65 #define CSR_PME 0x40 /* Promiscuous Mode Enable */
66 #define CSR_MCE 0x20 /* Multicast Enable */
67 #define CSR_TNE 0x08 /* TX Done Queue Not Empty */
68 #define CSR_RNE 0x04 /* RX Queue Not Empty */
69 #define CSR_TXD 0x02 /* TX Disable */
70 #define CSR_RXD 0x01 /* RX Disable */
73 ** Control Register bit definitions (EWRK3_CR)
75 #define CR_APD 0x80 /* Auto Port Disable */
76 #define CR_PSEL 0x40 /* Port Select (0->TP port) */
77 #define CR_LBCK 0x20 /* LoopBaCK enable */
78 #define CR_FDUP 0x10 /* Full DUPlex enable */
79 #define CR_FBUS 0x08 /* Fast BUS enable (ISA clk > 8.33MHz) */
80 #define CR_EN_16 0x04 /* ENable 16 bit memory accesses */
81 #define CR_LED 0x02 /* LED (1-> turn on) */
84 ** Interrupt Control Register bit definitions (EWRK3_ICR)
86 #define ICR_IE 0x80 /* Interrupt Enable */
87 #define ICR_IS 0x60 /* Interrupt Selected */
88 #define ICR_TNEM 0x08 /* TNE Mask (0->mask) */
89 #define ICR_RNEM 0x04 /* RNE Mask (0->mask) */
90 #define ICR_TXDM 0x02 /* TXD Mask (0->mask) */
91 #define ICR_RXDM 0x01 /* RXD Mask (0->mask) */
94 ** Transmit Status Register bit definitions (EWRK3_TSR)
96 #define TSR_NCL 0x80 /* No Carrier Loopback */
97 #define TSR_ID 0x40 /* Initially Deferred */
98 #define TSR_LCL 0x20 /* Late CoLlision */
99 #define TSR_ECL 0x10 /* Excessive CoLlisions */
100 #define TSR_RCNTR 0x0f /* Retries CouNTeR */
103 ** I/O Page Register bit definitions (EWRK3_IOPR)
105 #define EEPROM_INIT 0xc0 /* EEPROM INIT command */
106 #define EEPROM_WR_EN 0xc8 /* EEPROM WRITE ENABLE command */
107 #define EEPROM_WR 0xd0 /* EEPROM WRITE command */
108 #define EEPROM_WR_DIS 0xd8 /* EEPROM WRITE DISABLE command */
109 #define EEPROM_RD 0xe0 /* EEPROM READ command */
112 ** I/O Base Register bit definitions (EWRK3_IOBR)
114 #define EISA_REGS_EN 0x20 /* Enable EISA ID and Control Registers */
115 #define EISA_IOB 0x1f /* Compare bits for I/O Base Address */
118 ** I/O Configuration/Management Register bit definitions (EWRK3_CMR)
120 #define CMR_RA 0x80 /* Read Ahead */
121 #define CMR_WB 0x40 /* Write Behind */
122 #define CMR_LINK 0x20 /* 0->TP */
123 #define CMR_POLARITY 0x10 /* Informational */
124 #define CMR_NO_EEPROM 0x0c /* NO_EEPROM<1:0> pin status */
125 #define CMR_HS 0x08 /* Hard Strapped pin status (LeMAC2) */
126 #define CMR_PNP 0x04 /* Plug 'n Play */
127 #define CMR_DRAM 0x02 /* 0-> 1DRAM, 1-> 2 DRAM on board */
128 #define CMR_0WS 0x01 /* Zero Wait State */
131 ** MAC Receive Status Register bit definitions
134 #define R_ROK 0x80 /* Receive OK summary */
135 #define R_IAM 0x10 /* Individual Address Match */
136 #define R_MCM 0x08 /* MultiCast Match */
137 #define R_DBE 0x04 /* Dribble Bit Error */
138 #define R_CRC 0x02 /* CRC error */
139 #define R_PLL 0x01 /* Phase Lock Lost */
142 ** MAC Transmit Control Register bit definitions
145 #define TCR_SQEE 0x40 /* SQE Enable - look for heartbeat */
146 #define TCR_SED 0x20 /* Stop when Error Detected */
147 #define TCR_QMODE 0x10 /* Q_MODE */
148 #define TCR_LAB 0x08 /* Less Aggressive Backoff */
149 #define TCR_PAD 0x04 /* PAD Runt Packets */
150 #define TCR_IFC 0x02 /* Insert Frame Check */
151 #define TCR_ISA 0x01 /* Insert Source Address */
154 ** MAC Transmit Status Register bit definitions
157 #define T_VSTS 0x80 /* Valid STatuS */
158 #define T_CTU 0x40 /* Cut Through Used */
159 #define T_SQE 0x20 /* Signal Quality Error */
160 #define T_NCL 0x10 /* No Carrier Loopback */
161 #define T_LCL 0x08 /* Late Collision */
162 #define T_ID 0x04 /* Initially Deferred */
163 #define T_COLL 0x03 /* COLLision status */
164 #define T_XCOLL 0x03 /* Excessive Collisions */
165 #define T_MCOLL 0x02 /* Multiple Collisions */
166 #define T_OCOLL 0x01 /* One Collision */
167 #define T_NOCOLL 0x00 /* No Collisions */
168 #define T_XUR 0x03 /* Excessive Underruns */
169 #define T_TXE 0x7f /* TX Errors */
172 ** EISA Configuration Register bit definitions
175 #define EISA_ID iobase + 0x0c80 /* EISA ID Registers */
176 #define EISA_ID0 iobase + 0x0c80 /* EISA ID Register 0 */
177 #define EISA_ID1 iobase + 0x0c81 /* EISA ID Register 1 */
178 #define EISA_ID2 iobase + 0x0c82 /* EISA ID Register 2 */
179 #define EISA_ID3 iobase + 0x0c83 /* EISA ID Register 3 */
180 #define EISA_CR iobase + 0x0c84 /* EISA Control Register */
185 #define EEPROM_MEMB 0x00
186 #define EEPROM_IOB 0x01
187 #define EEPROM_EISA_ID0 0x02
188 #define EEPROM_EISA_ID1 0x03
189 #define EEPROM_EISA_ID2 0x04
190 #define EEPROM_EISA_ID3 0x05
191 #define EEPROM_MISC0 0x06
192 #define EEPROM_MISC1 0x07
193 #define EEPROM_PNAME7 0x08
194 #define EEPROM_PNAME6 0x09
195 #define EEPROM_PNAME5 0x0a
196 #define EEPROM_PNAME4 0x0b
197 #define EEPROM_PNAME3 0x0c
198 #define EEPROM_PNAME2 0x0d
199 #define EEPROM_PNAME1 0x0e
200 #define EEPROM_PNAME0 0x0f
201 #define EEPROM_SWFLAGS 0x10
202 #define EEPROM_HWCAT 0x11
203 #define EEPROM_NETMAN2 0x12
204 #define EEPROM_REVLVL 0x13
205 #define EEPROM_NETMAN0 0x14
206 #define EEPROM_NETMAN1 0x15
207 #define EEPROM_CHIPVER 0x16
208 #define EEPROM_SETUP 0x17
209 #define EEPROM_PADDR0 0x18
210 #define EEPROM_PADDR1 0x19
211 #define EEPROM_PADDR2 0x1a
212 #define EEPROM_PADDR3 0x1b
213 #define EEPROM_PADDR4 0x1c
214 #define EEPROM_PADDR5 0x1d
215 #define EEPROM_PA_CRC 0x1e
216 #define EEPROM_CHKSUM 0x1f
219 ** EEPROM bytes for checksumming
221 #define EEPROM_MAX 32 /* bytes */
224 ** EEPROM MISCELLANEOUS FLAGS
226 #define RBE_SHADOW 0x0100 /* Remote Boot Enable Shadow */
227 #define READ_AHEAD 0x0080 /* Read Ahead feature */
228 #define IRQ_SEL2 0x0070 /* IRQ line selection (LeMAC2) */
229 #define IRQ_SEL 0x0060 /* IRQ line selection */
230 #define FAST_BUS 0x0008 /* ISA Bus speeds > 8.33MHz */
231 #define ENA_16 0x0004 /* Enables 16 bit memory transfers */
232 #define WRITE_BEHIND 0x0002 /* Write Behind feature */
233 #define _0WS_ENA 0x0001 /* Zero Wait State Enable */
236 ** EEPROM NETWORK MANAGEMENT FLAGS
238 #define NETMAN_POL 0x04 /* Polarity defeat */
239 #define NETMAN_LINK 0x02 /* Link defeat */
240 #define NETMAN_CCE 0x01 /* Custom Counters Enable */
245 #define SW_SQE 0x10 /* Signal Quality Error */
246 #define SW_LAB 0x08 /* Less Aggressive Backoff */
247 #define SW_INIT 0x04 /* Initialized */
248 #define SW_TIMEOUT 0x02 /* 0:2.5 mins, 1: 30 secs */
249 #define SW_REMOTE 0x01 /* Remote Boot Enable -> 1 */
252 ** EEPROM SETUP FLAGS
254 #define SETUP_APD 0x80 /* AutoPort Disable */
255 #define SETUP_PS 0x40 /* Port Select */
256 #define SETUP_MP 0x20 /* MultiPort */
257 #define SETUP_1TP 0x10 /* 1 port, TP */
258 #define SETUP_1COAX 0x00 /* 1 port, Coax */
259 #define SETUP_DRAM 0x02 /* Number of DRAMS on board */
262 ** EEPROM MANAGEMENT FLAGS
264 #define MGMT_CCE 0x01 /* Custom Counters Enable */
276 #define EEPROM_WAIT_TIME 1000 /* Number of microseconds */
277 #define EISA_EN 0x0001 /* Enable EISA bus buffers */
279 #define HASH_TABLE_LEN 512 /* Bits */
281 #define XCT 0x80 /* Transmit Cut Through */
282 #define PRELOAD 16 /* 4 long words */
284 #define MASK_INTERRUPTS 1
285 #define UNMASK_INTERRUPTS 0
287 #define EEPROM_OFFSET(a) ((u_short)((u_long)(a)))
290 ** Include the IOCTL stuff
292 #include <linux/sockios.h>
294 #define EWRK3IOCTL SIOCDEVPRIVATE
297 unsigned short cmd
; /* Command to run */
298 unsigned short len
; /* Length of the data buffer */
299 unsigned char __user
*data
; /* Pointer to the data buffer */
303 ** Recognised commands for the driver
305 #define EWRK3_GET_HWADDR 0x01 /* Get the hardware address */
306 #define EWRK3_SET_HWADDR 0x02 /* Get the hardware address */
307 #define EWRK3_SET_PROM 0x03 /* Set Promiscuous Mode */
308 #define EWRK3_CLR_PROM 0x04 /* Clear Promiscuous Mode */
309 #define EWRK3_SAY_BOO 0x05 /* Say "Boo!" to the kernel log file */
310 #define EWRK3_GET_MCA 0x06 /* Get a multicast address */
311 #define EWRK3_SET_MCA 0x07 /* Set a multicast address */
312 #define EWRK3_CLR_MCA 0x08 /* Clear a multicast address */
313 #define EWRK3_MCA_EN 0x09 /* Enable a multicast address group */
314 #define EWRK3_GET_STATS 0x0a /* Get the driver statistics */
315 #define EWRK3_CLR_STATS 0x0b /* Zero out the driver statistics */
316 #define EWRK3_GET_CSR 0x0c /* Get the CSR Register contents */
317 #define EWRK3_SET_CSR 0x0d /* Set the CSR Register contents */
318 #define EWRK3_GET_EEPROM 0x0e /* Get the EEPROM contents */
319 #define EWRK3_SET_EEPROM 0x0f /* Set the EEPROM contents */
320 #define EWRK3_GET_CMR 0x10 /* Get the CMR Register contents */
321 #define EWRK3_CLR_TX_CUT_THRU 0x11 /* Clear the TX cut through mode */
322 #define EWRK3_SET_TX_CUT_THRU 0x12 /* Set the TX cut through mode */
This page took 0.036515 seconds and 5 git commands to generate.