drivers/net/phy/Kconfig

   1 #
   2 # PHY Layer Configuration
   3 #
   4
   5 menuconfig PHYLIB
   6         tristate "PHY Device support and infrastructure"
   7         depends on NETDEVICES
   8         help
   9           Ethernet controllers are usually attached to PHY
  10           devices.  This option provides infrastructure for
  11           managing PHY devices.
  12
  13 if PHYLIB
  14
  15 comment "MII PHY device drivers"
  16
  17 config AT803X_PHY
  18         tristate "Drivers for Atheros AT803X PHYs"
  19         ---help---
  20           Currently supports the AT8030 and AT8035 model
  21
  22 config AMD_PHY
  23         tristate "Drivers for the AMD PHYs"
  24         ---help---
  25           Currently supports the am79c874
  26
  27 config AMD_XGBE_PHY
  28         tristate "Driver for the AMD 10GbE (amd-xgbe) PHYs"
  29         depends on OF
  30         ---help---
  31           Currently supports the AMD 10GbE PHY
  32
  33 config MARVELL_PHY
  34         tristate "Drivers for Marvell PHYs"
  35         ---help---
  36           Currently has a driver for the 88E1011S
  37
  38 config DAVICOM_PHY
  39         tristate "Drivers for Davicom PHYs"
  40         ---help---
  41           Currently supports dm9161e and dm9131
  42
  43 config QSEMI_PHY
  44         tristate "Drivers for Quality Semiconductor PHYs"
  45         ---help---
  46           Currently supports the qs6612
  47
  48 config LXT_PHY
  49         tristate "Drivers for the Intel LXT PHYs"
  50         ---help---
  51           Currently supports the lxt970, lxt971
  52
  53 config CICADA_PHY
  54         tristate "Drivers for the Cicada PHYs"
  55         ---help---
  56           Currently supports the cis8204
  57
  58 config VITESSE_PHY
  59         tristate "Drivers for the Vitesse PHYs"
  60         ---help---
  61           Currently supports the vsc8244
  62
  63 config SMSC_PHY
  64         tristate "Drivers for SMSC PHYs"
  65         ---help---
  66           Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs
  67
  68 config BROADCOM_PHY
  69         tristate "Drivers for Broadcom PHYs"
  70         ---help---
  71           Currently supports the BCM5411, BCM5421, BCM5461, BCM5464, BCM5481
  72           and BCM5482 PHYs.
  73
  74 config BCM63XX_PHY
  75         tristate "Drivers for Broadcom 63xx SOCs internal PHY"
  76         depends on BCM63XX
  77         ---help---
  78           Currently supports the 6348 and 6358 PHYs.
  79
  80 config BCM7XXX_PHY
  81         tristate "Drivers for Broadcom 7xxx SOCs internal PHYs"
  82         ---help---
  83           Currently supports the BCM7366, BCM7439, BCM7445, and
  84           40nm and 65nm generation of BCM7xxx Set Top Box SoCs.
  85
  86 config BCM87XX_PHY
  87         tristate "Driver for Broadcom BCM8706 and BCM8727 PHYs"
  88         help
  89           Currently supports the BCM8706 and BCM8727 10G Ethernet PHYs.
  90
  91 config ICPLUS_PHY
  92         tristate "Drivers for ICPlus PHYs"
  93         ---help---
  94           Currently supports the IP175C and IP1001 PHYs.
  95
  96 config REALTEK_PHY
  97         tristate "Drivers for Realtek PHYs"
  98         ---help---
  99           Supports the Realtek 821x PHY.
 100
 101 config NATIONAL_PHY
 102         tristate "Drivers for National Semiconductor PHYs"
 103         ---help---
 104           Currently supports the DP83865 PHY.
 105
 106 config STE10XP
 107         tristate "Driver for STMicroelectronics STe10Xp PHYs"
 108         ---help---
 109           This is the driver for the STe100p and STe101p PHYs.
 110
 111 config LSI_ET1011C_PHY
 112         tristate "Driver for LSI ET1011C PHY"
 113         ---help---
 114           Supports the LSI ET1011C PHY.
 115
 116 config MICREL_PHY
 117         tristate "Driver for Micrel PHYs"
 118         ---help---
 119           Supports the KSZ9021, VSC8201, KS8001 PHYs.
 120
 121 config FIXED_PHY
 122         bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
 123         depends on PHYLIB=y
 124         ---help---
 125           Adds the platform "fixed" MDIO Bus to cover the boards that use
 126           PHYs that are not connected to the real MDIO bus.
 127
 128           Currently tested with mpc866ads and mpc8349e-mitx.
 129
 130 config MDIO_BITBANG
 131         tristate "Support for bitbanged MDIO buses"
 132         help
 133           This module implements the MDIO bus protocol in software,
 134           for use by low level drivers that export the ability to
 135           drive the relevant pins.
 136
 137           If in doubt, say N.
 138
 139 config MDIO_GPIO
 140         tristate "Support for GPIO lib-based bitbanged MDIO buses"
 141         depends on MDIO_BITBANG && GPIOLIB
 142         ---help---
 143           Supports GPIO lib-based MDIO busses.
 144
 145           To compile this driver as a module, choose M here: the module
 146           will be called mdio-gpio.
 147
 148 config MDIO_OCTEON
 149         tristate "Support for MDIO buses on Octeon SOCs"
 150         depends on CAVIUM_OCTEON_SOC
 151         default y
 152         help
 153
 154           This module provides a driver for the Octeon MDIO busses.
 155           It is required by the Octeon Ethernet device drivers.
 156
 157           If in doubt, say Y.
 158
 159 config MDIO_SUN4I
 160         tristate "Allwinner sun4i MDIO interface support"
 161         depends on ARCH_SUNXI
 162         select REGULATOR
 163         select REGULATOR_FIXED_VOLTAGE
 164         help
 165           This driver supports the MDIO interface found in the network
 166           interface units of the Allwinner SoC that have an EMAC (A10,
 167           A12, A10s, etc.)
 168
 169 config MDIO_MOXART
 170         tristate "MOXA ART MDIO interface support"
 171         depends on ARCH_MOXART
 172         help
 173           This driver supports the MDIO interface found in the network
 174           interface units of the MOXA ART SoC
 175
 176 config MDIO_BUS_MUX
 177         tristate
 178         depends on OF_MDIO
 179         help
 180           This module provides a driver framework for MDIO bus
 181           multiplexers which connect one of several child MDIO busses
 182           to a parent bus.  Switching between child busses is done by
 183           device specific drivers.
 184
 185 config MDIO_BUS_MUX_GPIO
 186         tristate "Support for GPIO controlled MDIO bus multiplexers"
 187         depends on OF_GPIO && OF_MDIO
 188         select MDIO_BUS_MUX
 189         help
 190           This module provides a driver for MDIO bus multiplexers that
 191           are controlled via GPIO lines.  The multiplexer connects one of
 192           several child MDIO busses to a parent bus.  Child bus
 193           selection is under the control of GPIO lines.
 194
 195 config MDIO_BUS_MUX_MMIOREG
 196         tristate "Support for MMIO device-controlled MDIO bus multiplexers"
 197         depends on OF_MDIO
 198         select MDIO_BUS_MUX
 199         help
 200           This module provides a driver for MDIO bus multiplexers that
 201           are controlled via a simple memory-mapped device, like an FPGA.
 202           The multiplexer connects one of several child MDIO busses to a
 203           parent bus.  Child bus selection is under the control of one of
 204           the FPGA's registers.
 205
 206           Currently, only 8-bit registers are supported.
 207
 208 endif # PHYLIB
 209
 210 config MICREL_KS8995MA
 211         tristate "Micrel KS8995MA 5-ports 10/100 managed Ethernet switch"
 212         depends on SPI