drivers/net/phy/Kconfig

   1 #
   2 # PHY Layer Configuration
   3 #
   4
   5 menuconfig PHYLIB
   6         tristate "PHY Device support and infrastructure"
   7         depends on NETDEVICES
   8         help
   9           Ethernet controllers are usually attached to PHY
  10           devices.  This option provides infrastructure for
  11           managing PHY devices.
  12
  13 if PHYLIB
  14
  15 comment "MII PHY device drivers"
  16
  17 config AQUANTIA_PHY
  18         tristate "Drivers for the Aquantia PHYs"
  19         ---help---
  20           Currently supports the Aquantia AQ1202, AQ2104, AQR105, AQR405
  21
  22 config AT803X_PHY
  23         tristate "Drivers for Atheros AT803X PHYs"
  24         ---help---
  25           Currently supports the AT8030 and AT8035 model
  26
  27 config AMD_PHY
  28         tristate "Drivers for the AMD PHYs"
  29         ---help---
  30           Currently supports the am79c874
  31
  32 config MARVELL_PHY
  33         tristate "Drivers for Marvell PHYs"
  34         ---help---
  35           Currently has a driver for the 88E1011S
  36
  37 config DAVICOM_PHY
  38         tristate "Drivers for Davicom PHYs"
  39         ---help---
  40           Currently supports dm9161e and dm9131
  41
  42 config QSEMI_PHY
  43         tristate "Drivers for Quality Semiconductor PHYs"
  44         ---help---
  45           Currently supports the qs6612
  46
  47 config LXT_PHY
  48         tristate "Drivers for the Intel LXT PHYs"
  49         ---help---
  50           Currently supports the lxt970, lxt971
  51
  52 config CICADA_PHY
  53         tristate "Drivers for the Cicada PHYs"
  54         ---help---
  55           Currently supports the cis8204
  56
  57 config VITESSE_PHY
  58         tristate "Drivers for the Vitesse PHYs"
  59         ---help---
  60           Currently supports the vsc8244
  61
  62 config TERANETICS_PHY
  63         tristate "Drivers for the Teranetics PHYs"
  64         ---help---
  65           Currently supports the Teranetics TN2020
  66
  67 config SMSC_PHY
  68         tristate "Drivers for SMSC PHYs"
  69         ---help---
  70           Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs
  71
  72 config BCM_NET_PHYLIB
  73         tristate
  74
  75 config BROADCOM_PHY
  76         tristate "Drivers for Broadcom PHYs"
  77         select BCM_NET_PHYLIB
  78         ---help---
  79           Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464,
  80           BCM5481 and BCM5482 PHYs.
  81
  82 config BCM_CYGNUS_PHY
  83         tristate "Drivers for Broadcom Cygnus SoC internal PHY"
  84         depends on ARCH_BCM_CYGNUS || COMPILE_TEST
  85         depends on MDIO_BCM_IPROC
  86         select BCM_NET_PHYLIB
  87         ---help---
  88           This PHY driver is for the 1G internal PHYs of the Broadcom
  89           Cygnus Family SoC.
  90
  91           Currently supports internal PHY's used in the BCM11300,
  92           BCM11320, BCM11350, BCM11360, BCM58300, BCM58302,
  93           BCM58303 & BCM58305 Broadcom Cygnus SoCs.
  94
  95 config BCM63XX_PHY
  96         tristate "Drivers for Broadcom 63xx SOCs internal PHY"
  97         depends on BCM63XX
  98         select BCM_NET_PHYLIB
  99         ---help---
 100           Currently supports the 6348 and 6358 PHYs.
 101
 102 config BCM7XXX_PHY
 103         tristate "Drivers for Broadcom 7xxx SOCs internal PHYs"
 104         select BCM_NET_PHYLIB
 105         ---help---
 106           Currently supports the BCM7366, BCM7439, BCM7445, and
 107           40nm and 65nm generation of BCM7xxx Set Top Box SoCs.
 108
 109 config BCM87XX_PHY
 110         tristate "Driver for Broadcom BCM8706 and BCM8727 PHYs"
 111         help
 112           Currently supports the BCM8706 and BCM8727 10G Ethernet PHYs.
 113
 114 config ICPLUS_PHY
 115         tristate "Drivers for ICPlus PHYs"
 116         ---help---
 117           Currently supports the IP175C and IP1001 PHYs.
 118
 119 config REALTEK_PHY
 120         tristate "Drivers for Realtek PHYs"
 121         ---help---
 122           Supports the Realtek 821x PHY.
 123
 124 config NATIONAL_PHY
 125         tristate "Drivers for National Semiconductor PHYs"
 126         ---help---
 127           Currently supports the DP83865 PHY.
 128
 129 config STE10XP
 130         tristate "Driver for STMicroelectronics STe10Xp PHYs"
 131         ---help---
 132           This is the driver for the STe100p and STe101p PHYs.
 133
 134 config LSI_ET1011C_PHY
 135         tristate "Driver for LSI ET1011C PHY"
 136         ---help---
 137           Supports the LSI ET1011C PHY.
 138
 139 config MICREL_PHY
 140         tristate "Driver for Micrel PHYs"
 141         ---help---
 142           Supports the KSZ9021, VSC8201, KS8001 PHYs.
 143
 144 config DP83848_PHY
 145         tristate "Driver for Texas Instruments DP83848 PHY"
 146         ---help---
 147           Supports the DP83848 PHY.
 148
 149 config DP83867_PHY
 150         tristate "Drivers for Texas Instruments DP83867 Gigabit PHY"
 151         ---help---
 152           Currently supports the DP83867 PHY.
 153
 154 config MICROCHIP_PHY
 155         tristate "Drivers for Microchip PHYs"
 156         help
 157           Supports the LAN88XX PHYs.
 158
 159 config FIXED_PHY
 160         tristate "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
 161         depends on PHYLIB
 162         ---help---
 163           Adds the platform "fixed" MDIO Bus to cover the boards that use
 164           PHYs that are not connected to the real MDIO bus.
 165
 166           Currently tested with mpc866ads and mpc8349e-mitx.
 167
 168 config MDIO_BITBANG
 169         tristate "Support for bitbanged MDIO buses"
 170         help
 171           This module implements the MDIO bus protocol in software,
 172           for use by low level drivers that export the ability to
 173           drive the relevant pins.
 174
 175           If in doubt, say N.
 176
 177 config MDIO_GPIO
 178         tristate "Support for GPIO lib-based bitbanged MDIO buses"
 179         depends on MDIO_BITBANG && GPIOLIB
 180         ---help---
 181           Supports GPIO lib-based MDIO busses.
 182
 183           To compile this driver as a module, choose M here: the module
 184           will be called mdio-gpio.
 185
 186 config MDIO_CAVIUM
 187         tristate
 188
 189 config MDIO_OCTEON
 190         tristate "Support for MDIO buses on Octeon and some ThunderX SOCs"
 191         depends on 64BIT
 192         depends on HAS_IOMEM
 193         select MDIO_CAVIUM
 194         help
 195           This module provides a driver for the Octeon and ThunderX MDIO
 196           buses. It is required by the Octeon and ThunderX ethernet device
 197           drivers on some systems.
 198
 199 config MDIO_THUNDER
 200         tristate "Support for MDIO buses on ThunderX SOCs"
 201         depends on 64BIT
 202         depends on PCI
 203         select MDIO_CAVIUM
 204         help
 205           This driver supports the MDIO interfaces found on Cavium
 206           ThunderX SoCs when the MDIO bus device appears as a PCI
 207           device.
 208
 209
 210 config MDIO_SUN4I
 211         tristate "Allwinner sun4i MDIO interface support"
 212         depends on ARCH_SUNXI
 213         help
 214           This driver supports the MDIO interface found in the network
 215           interface units of the Allwinner SoC that have an EMAC (A10,
 216           A12, A10s, etc.)
 217
 218 config MDIO_MOXART
 219         tristate "MOXA ART MDIO interface support"
 220         depends on ARCH_MOXART
 221         help
 222           This driver supports the MDIO interface found in the network
 223           interface units of the MOXA ART SoC
 224
 225 config MDIO_BUS_MUX
 226         tristate
 227         depends on OF_MDIO
 228         help
 229           This module provides a driver framework for MDIO bus
 230           multiplexers which connect one of several child MDIO busses
 231           to a parent bus.  Switching between child busses is done by
 232           device specific drivers.
 233
 234 config MDIO_BUS_MUX_GPIO
 235         tristate "Support for GPIO controlled MDIO bus multiplexers"
 236         depends on OF_GPIO && OF_MDIO
 237         select MDIO_BUS_MUX
 238         help
 239           This module provides a driver for MDIO bus multiplexers that
 240           are controlled via GPIO lines.  The multiplexer connects one of
 241           several child MDIO busses to a parent bus.  Child bus
 242           selection is under the control of GPIO lines.
 243
 244 config MDIO_BUS_MUX_MMIOREG
 245         tristate "Support for MMIO device-controlled MDIO bus multiplexers"
 246         depends on OF_MDIO && HAS_IOMEM
 247         select MDIO_BUS_MUX
 248         help
 249           This module provides a driver for MDIO bus multiplexers that
 250           are controlled via a simple memory-mapped device, like an FPGA.
 251           The multiplexer connects one of several child MDIO busses to a
 252           parent bus.  Child bus selection is under the control of one of
 253           the FPGA's registers.
 254
 255           Currently, only 8-bit registers are supported.
 256
 257 config MDIO_BCM_UNIMAC
 258         tristate "Broadcom UniMAC MDIO bus controller"
 259         depends on HAS_IOMEM
 260         help
 261           This module provides a driver for the Broadcom UniMAC MDIO busses.
 262           This hardware can be found in the Broadcom GENET Ethernet MAC
 263           controllers as well as some Broadcom Ethernet switches such as the
 264           Starfighter 2 switches.
 265
 266 config MDIO_BCM_IPROC
 267         tristate "Broadcom iProc MDIO bus controller"
 268         depends on ARCH_BCM_IPROC || COMPILE_TEST
 269         depends on HAS_IOMEM && OF_MDIO
 270         help
 271           This module provides a driver for the MDIO busses found in the
 272           Broadcom iProc SoC's.
 273
 274 endif # PHYLIB
 275
 276 config MICREL_KS8995MA
 277         tristate "Micrel KS8995MA 5-ports 10/100 managed Ethernet switch"
 278         depends on SPI