1 /* $Id: sunqe.h,v 1.13 2000/02/09 11:15:42 davem Exp $
2 * sunqe.h: Definitions for the Sun QuadEthernet driver.
4 * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
10 /* QEC global registers. */
11 #define GLOB_CTRL 0x00UL /* Control */
12 #define GLOB_STAT 0x04UL /* Status */
13 #define GLOB_PSIZE 0x08UL /* Packet Size */
14 #define GLOB_MSIZE 0x0cUL /* Local-memory Size */
15 #define GLOB_RSIZE 0x10UL /* Receive partition size */
16 #define GLOB_TSIZE 0x14UL /* Transmit partition size */
17 #define GLOB_REG_SIZE 0x18UL
19 #define GLOB_CTRL_MMODE 0x40000000 /* MACE qec mode */
20 #define GLOB_CTRL_BMODE 0x10000000 /* BigMAC qec mode */
21 #define GLOB_CTRL_EPAR 0x00000020 /* Enable parity */
22 #define GLOB_CTRL_ACNTRL 0x00000018 /* SBUS arbitration control */
23 #define GLOB_CTRL_B64 0x00000004 /* 64 byte dvma bursts */
24 #define GLOB_CTRL_B32 0x00000002 /* 32 byte dvma bursts */
25 #define GLOB_CTRL_B16 0x00000000 /* 16 byte dvma bursts */
26 #define GLOB_CTRL_RESET 0x00000001 /* Reset the QEC */
28 #define GLOB_STAT_TX 0x00000008 /* BigMAC Transmit IRQ */
29 #define GLOB_STAT_RX 0x00000004 /* BigMAC Receive IRQ */
30 #define GLOB_STAT_BM 0x00000002 /* BigMAC Global IRQ */
31 #define GLOB_STAT_ER 0x00000001 /* BigMAC Error IRQ */
33 #define GLOB_PSIZE_2048 0x00 /* 2k packet size */
34 #define GLOB_PSIZE_4096 0x01 /* 4k packet size */
35 #define GLOB_PSIZE_6144 0x10 /* 6k packet size */
36 #define GLOB_PSIZE_8192 0x11 /* 8k packet size */
38 /* In MACE mode, there are four qe channels. Each channel has it's own
39 * status bits in the QEC status register. This macro picks out the
42 #define GLOB_STAT_PER_QE(status, channel) (((status) >> ((channel) * 4)) & 0xf)
44 /* The following registers are for per-qe channel information/status. */
45 #define CREG_CTRL 0x00UL /* Control */
46 #define CREG_STAT 0x04UL /* Status */
47 #define CREG_RXDS 0x08UL /* RX descriptor ring ptr */
48 #define CREG_TXDS 0x0cUL /* TX descriptor ring ptr */
49 #define CREG_RIMASK 0x10UL /* RX Interrupt Mask */
50 #define CREG_TIMASK 0x14UL /* TX Interrupt Mask */
51 #define CREG_QMASK 0x18UL /* QEC Error Interrupt Mask */
52 #define CREG_MMASK 0x1cUL /* MACE Error Interrupt Mask */
53 #define CREG_RXWBUFPTR 0x20UL /* Local memory rx write ptr */
54 #define CREG_RXRBUFPTR 0x24UL /* Local memory rx read ptr */
55 #define CREG_TXWBUFPTR 0x28UL /* Local memory tx write ptr */
56 #define CREG_TXRBUFPTR 0x2cUL /* Local memory tx read ptr */
57 #define CREG_CCNT 0x30UL /* Collision Counter */
58 #define CREG_PIPG 0x34UL /* Inter-Frame Gap */
59 #define CREG_REG_SIZE 0x38UL
61 #define CREG_CTRL_RXOFF 0x00000004 /* Disable this qe's receiver*/
62 #define CREG_CTRL_RESET 0x00000002 /* Reset this qe channel */
63 #define CREG_CTRL_TWAKEUP 0x00000001 /* Transmitter Wakeup, 'go'. */
65 #define CREG_STAT_EDEFER 0x10000000 /* Excessive Defers */
66 #define CREG_STAT_CLOSS 0x08000000 /* Carrier Loss */
67 #define CREG_STAT_ERETRIES 0x04000000 /* More than 16 retries */
68 #define CREG_STAT_LCOLL 0x02000000 /* Late TX Collision */
69 #define CREG_STAT_FUFLOW 0x01000000 /* FIFO Underflow */
70 #define CREG_STAT_JERROR 0x00800000 /* Jabber Error */
71 #define CREG_STAT_BERROR 0x00400000 /* Babble Error */
72 #define CREG_STAT_TXIRQ 0x00200000 /* Transmit Interrupt */
73 #define CREG_STAT_CCOFLOW 0x00100000 /* TX Coll-counter Overflow */
74 #define CREG_STAT_TXDERROR 0x00080000 /* TX Descriptor is bogus */
75 #define CREG_STAT_TXLERR 0x00040000 /* Late Transmit Error */
76 #define CREG_STAT_TXPERR 0x00020000 /* Transmit Parity Error */
77 #define CREG_STAT_TXSERR 0x00010000 /* Transmit SBUS error ack */
78 #define CREG_STAT_RCCOFLOW 0x00001000 /* RX Coll-counter Overflow */
79 #define CREG_STAT_RUOFLOW 0x00000800 /* Runt Counter Overflow */
80 #define CREG_STAT_MCOFLOW 0x00000400 /* Missed Counter Overflow */
81 #define CREG_STAT_RXFOFLOW 0x00000200 /* RX FIFO Overflow */
82 #define CREG_STAT_RLCOLL 0x00000100 /* RX Late Collision */
83 #define CREG_STAT_FCOFLOW 0x00000080 /* Frame Counter Overflow */
84 #define CREG_STAT_CECOFLOW 0x00000040 /* CRC Error-counter Overflow*/
85 #define CREG_STAT_RXIRQ 0x00000020 /* Receive Interrupt */
86 #define CREG_STAT_RXDROP 0x00000010 /* Dropped a RX'd packet */
87 #define CREG_STAT_RXSMALL 0x00000008 /* Receive buffer too small */
88 #define CREG_STAT_RXLERR 0x00000004 /* Receive Late Error */
89 #define CREG_STAT_RXPERR 0x00000002 /* Receive Parity Error */
90 #define CREG_STAT_RXSERR 0x00000001 /* Receive SBUS Error ACK */
92 #define CREG_STAT_ERRORS (CREG_STAT_EDEFER|CREG_STAT_CLOSS|CREG_STAT_ERETRIES| \
93 CREG_STAT_LCOLL|CREG_STAT_FUFLOW|CREG_STAT_JERROR| \
94 CREG_STAT_BERROR|CREG_STAT_CCOFLOW|CREG_STAT_TXDERROR| \
95 CREG_STAT_TXLERR|CREG_STAT_TXPERR|CREG_STAT_TXSERR| \
96 CREG_STAT_RCCOFLOW|CREG_STAT_RUOFLOW|CREG_STAT_MCOFLOW| \
97 CREG_STAT_RXFOFLOW|CREG_STAT_RLCOLL|CREG_STAT_FCOFLOW| \
98 CREG_STAT_CECOFLOW|CREG_STAT_RXDROP|CREG_STAT_RXSMALL| \
99 CREG_STAT_RXLERR|CREG_STAT_RXPERR|CREG_STAT_RXSERR)
101 #define CREG_QMASK_COFLOW 0x00100000 /* CollCntr overflow */
102 #define CREG_QMASK_TXDERROR 0x00080000 /* TXD error */
103 #define CREG_QMASK_TXLERR 0x00040000 /* TX late error */
104 #define CREG_QMASK_TXPERR 0x00020000 /* TX parity error */
105 #define CREG_QMASK_TXSERR 0x00010000 /* TX sbus error ack */
106 #define CREG_QMASK_RXDROP 0x00000010 /* RX drop */
107 #define CREG_QMASK_RXBERROR 0x00000008 /* RX buffer error */
108 #define CREG_QMASK_RXLEERR 0x00000004 /* RX late error */
109 #define CREG_QMASK_RXPERR 0x00000002 /* RX parity error */
110 #define CREG_QMASK_RXSERR 0x00000001 /* RX sbus error ack */
112 #define CREG_MMASK_EDEFER 0x10000000 /* Excess defer */
113 #define CREG_MMASK_CLOSS 0x08000000 /* Carrier loss */
114 #define CREG_MMASK_ERETRY 0x04000000 /* Excess retry */
115 #define CREG_MMASK_LCOLL 0x02000000 /* Late collision error */
116 #define CREG_MMASK_UFLOW 0x01000000 /* Underflow */
117 #define CREG_MMASK_JABBER 0x00800000 /* Jabber error */
118 #define CREG_MMASK_BABBLE 0x00400000 /* Babble error */
119 #define CREG_MMASK_OFLOW 0x00000800 /* Overflow */
120 #define CREG_MMASK_RXCOLL 0x00000400 /* RX Coll-Cntr overflow */
121 #define CREG_MMASK_RPKT 0x00000200 /* Runt pkt overflow */
122 #define CREG_MMASK_MPKT 0x00000100 /* Missed pkt overflow */
124 #define CREG_PIPG_TENAB 0x00000020 /* Enable Throttle */
125 #define CREG_PIPG_MMODE 0x00000010 /* Manual Mode */
126 #define CREG_PIPG_WMASK 0x0000000f /* SBUS Wait Mask */
128 /* Per-channel AMD 79C940 MACE registers. */
129 #define MREGS_RXFIFO 0x00UL /* Receive FIFO */
130 #define MREGS_TXFIFO 0x01UL /* Transmit FIFO */
131 #define MREGS_TXFCNTL 0x02UL /* Transmit Frame Control */
132 #define MREGS_TXFSTAT 0x03UL /* Transmit Frame Status */
133 #define MREGS_TXRCNT 0x04UL /* Transmit Retry Count */
134 #define MREGS_RXFCNTL 0x05UL /* Receive Frame Control */
135 #define MREGS_RXFSTAT 0x06UL /* Receive Frame Status */
136 #define MREGS_FFCNT 0x07UL /* FIFO Frame Count */
137 #define MREGS_IREG 0x08UL /* Interrupt Register */
138 #define MREGS_IMASK 0x09UL /* Interrupt Mask */
139 #define MREGS_POLL 0x0aUL /* POLL Register */
140 #define MREGS_BCONFIG 0x0bUL /* BIU Config */
141 #define MREGS_FCONFIG 0x0cUL /* FIFO Config */
142 #define MREGS_MCONFIG 0x0dUL /* MAC Config */
143 #define MREGS_PLSCONFIG 0x0eUL /* PLS Config */
144 #define MREGS_PHYCONFIG 0x0fUL /* PHY Config */
145 #define MREGS_CHIPID1 0x10UL /* Chip-ID, low bits */
146 #define MREGS_CHIPID2 0x11UL /* Chip-ID, high bits */
147 #define MREGS_IACONFIG 0x12UL /* Internal Address Config */
148 /* 0x13UL, reserved */
149 #define MREGS_FILTER 0x14UL /* Logical Address Filter */
150 #define MREGS_ETHADDR 0x15UL /* Our Ethernet Address */
151 /* 0x16UL, reserved */
152 /* 0x17UL, reserved */
153 #define MREGS_MPCNT 0x18UL /* Missed Packet Count */
154 /* 0x19UL, reserved */
155 #define MREGS_RPCNT 0x1aUL /* Runt Packet Count */
156 #define MREGS_RCCNT 0x1bUL /* RX Collision Count */
157 /* 0x1cUL, reserved */
158 #define MREGS_UTEST 0x1dUL /* User Test */
159 #define MREGS_RTEST1 0x1eUL /* Reserved Test 1 */
160 #define MREGS_RTEST2 0x1fUL /* Reserved Test 2 */
161 #define MREGS_REG_SIZE 0x20UL
163 #define MREGS_TXFCNTL_DRETRY 0x80 /* Retry disable */
164 #define MREGS_TXFCNTL_DFCS 0x08 /* Disable TX FCS */
165 #define MREGS_TXFCNTL_AUTOPAD 0x01 /* TX auto pad */
167 #define MREGS_TXFSTAT_VALID 0x80 /* TX valid */
168 #define MREGS_TXFSTAT_UNDERFLOW 0x40 /* TX underflow */
169 #define MREGS_TXFSTAT_LCOLL 0x20 /* TX late collision */
170 #define MREGS_TXFSTAT_MRETRY 0x10 /* TX > 1 retries */
171 #define MREGS_TXFSTAT_ORETRY 0x08 /* TX 1 retry */
172 #define MREGS_TXFSTAT_PDEFER 0x04 /* TX pkt deferred */
173 #define MREGS_TXFSTAT_CLOSS 0x02 /* TX carrier lost */
174 #define MREGS_TXFSTAT_RERROR 0x01 /* TX retry error */
176 #define MREGS_TXRCNT_EDEFER 0x80 /* TX Excess defers */
177 #define MREGS_TXRCNT_CMASK 0x0f /* TX retry count */
179 #define MREGS_RXFCNTL_LOWLAT 0x08 /* RX low latency */
180 #define MREGS_RXFCNTL_AREJECT 0x04 /* RX addr match rej */
181 #define MREGS_RXFCNTL_AUTOSTRIP 0x01 /* RX auto strip */
183 #define MREGS_RXFSTAT_OVERFLOW 0x80 /* RX overflow */
184 #define MREGS_RXFSTAT_LCOLL 0x40 /* RX late collision */
185 #define MREGS_RXFSTAT_FERROR 0x20 /* RX framing error */
186 #define MREGS_RXFSTAT_FCSERROR 0x10 /* RX FCS error */
187 #define MREGS_RXFSTAT_RBCNT 0x0f /* RX msg byte count */
189 #define MREGS_FFCNT_RX 0xf0 /* RX FIFO frame cnt */
190 #define MREGS_FFCNT_TX 0x0f /* TX FIFO frame cnt */
192 #define MREGS_IREG_JABBER 0x80 /* IRQ Jabber error */
193 #define MREGS_IREG_BABBLE 0x40 /* IRQ Babble error */
194 #define MREGS_IREG_COLL 0x20 /* IRQ Collision error */
195 #define MREGS_IREG_RCCO 0x10 /* IRQ Collision cnt overflow */
196 #define MREGS_IREG_RPKTCO 0x08 /* IRQ Runt packet count overflow */
197 #define MREGS_IREG_MPKTCO 0x04 /* IRQ missed packet cnt overflow */
198 #define MREGS_IREG_RXIRQ 0x02 /* IRQ RX'd a packet */
199 #define MREGS_IREG_TXIRQ 0x01 /* IRQ TX'd a packet */
201 #define MREGS_IMASK_BABBLE 0x40 /* IMASK Babble errors */
202 #define MREGS_IMASK_COLL 0x20 /* IMASK Collision errors */
203 #define MREGS_IMASK_MPKTCO 0x04 /* IMASK Missed pkt cnt overflow */
204 #define MREGS_IMASK_RXIRQ 0x02 /* IMASK RX interrupts */
205 #define MREGS_IMASK_TXIRQ 0x01 /* IMASK TX interrupts */
207 #define MREGS_POLL_TXVALID 0x80 /* TX is valid */
208 #define MREGS_POLL_TDTR 0x40 /* TX data transfer request */
209 #define MREGS_POLL_RDTR 0x20 /* RX data transfer request */
211 #define MREGS_BCONFIG_BSWAP 0x40 /* Byte Swap */
212 #define MREGS_BCONFIG_4TS 0x00 /* 4byte transmit start point */
213 #define MREGS_BCONFIG_16TS 0x10 /* 16byte transmit start point */
214 #define MREGS_BCONFIG_64TS 0x20 /* 64byte transmit start point */
215 #define MREGS_BCONFIG_112TS 0x30 /* 112byte transmit start point */
216 #define MREGS_BCONFIG_RESET 0x01 /* SW-Reset the MACE */
218 #define MREGS_FCONFIG_TXF8 0x00 /* TX fifo 8 write cycles */
219 #define MREGS_FCONFIG_TXF32 0x80 /* TX fifo 32 write cycles */
220 #define MREGS_FCONFIG_TXF16 0x40 /* TX fifo 16 write cycles */
221 #define MREGS_FCONFIG_RXF64 0x20 /* RX fifo 64 write cycles */
222 #define MREGS_FCONFIG_RXF32 0x10 /* RX fifo 32 write cycles */
223 #define MREGS_FCONFIG_RXF16 0x00 /* RX fifo 16 write cycles */
224 #define MREGS_FCONFIG_TFWU 0x08 /* TX fifo watermark update */
225 #define MREGS_FCONFIG_RFWU 0x04 /* RX fifo watermark update */
226 #define MREGS_FCONFIG_TBENAB 0x02 /* TX burst enable */
227 #define MREGS_FCONFIG_RBENAB 0x01 /* RX burst enable */
229 #define MREGS_MCONFIG_PROMISC 0x80 /* Promiscuous mode enable */
230 #define MREGS_MCONFIG_TPDDISAB 0x40 /* TX 2part deferral enable */
231 #define MREGS_MCONFIG_MBAENAB 0x20 /* Modified backoff enable */
232 #define MREGS_MCONFIG_RPADISAB 0x08 /* RX physical addr disable */
233 #define MREGS_MCONFIG_RBDISAB 0x04 /* RX broadcast disable */
234 #define MREGS_MCONFIG_TXENAB 0x02 /* Enable transmitter */
235 #define MREGS_MCONFIG_RXENAB 0x01 /* Enable receiver */
237 #define MREGS_PLSCONFIG_TXMS 0x08 /* TX mode select */
238 #define MREGS_PLSCONFIG_GPSI 0x06 /* Use GPSI connector */
239 #define MREGS_PLSCONFIG_DAI 0x04 /* Use DAI connector */
240 #define MREGS_PLSCONFIG_TP 0x02 /* Use TwistedPair connector */
241 #define MREGS_PLSCONFIG_AUI 0x00 /* Use AUI connector */
242 #define MREGS_PLSCONFIG_IOENAB 0x01 /* PLS I/O enable */
244 #define MREGS_PHYCONFIG_LSTAT 0x80 /* Link status */
245 #define MREGS_PHYCONFIG_LTESTDIS 0x40 /* Disable link test logic */
246 #define MREGS_PHYCONFIG_RXPOLARITY 0x20 /* RX polarity */
247 #define MREGS_PHYCONFIG_APCDISAB 0x10 /* AutoPolarityCorrect disab */
248 #define MREGS_PHYCONFIG_LTENAB 0x08 /* Select low threshold */
249 #define MREGS_PHYCONFIG_AUTO 0x04 /* Connector port auto-sel */
250 #define MREGS_PHYCONFIG_RWU 0x02 /* Remote WakeUp */
251 #define MREGS_PHYCONFIG_AW 0x01 /* Auto Wakeup */
253 #define MREGS_IACONFIG_ACHNGE 0x80 /* Do address change */
254 #define MREGS_IACONFIG_PARESET 0x04 /* Physical address reset */
255 #define MREGS_IACONFIG_LARESET 0x02 /* Logical address reset */
257 #define MREGS_UTEST_RTRENAB 0x80 /* Enable resv test register */
258 #define MREGS_UTEST_RTRDISAB 0x40 /* Disab resv test register */
259 #define MREGS_UTEST_RPACCEPT 0x20 /* Accept runt packets */
260 #define MREGS_UTEST_FCOLL 0x10 /* Force collision status */
261 #define MREGS_UTEST_FCSENAB 0x08 /* Enable FCS on RX */
262 #define MREGS_UTEST_INTLOOPM 0x06 /* Intern lpback w/MENDEC */
263 #define MREGS_UTEST_INTLOOP 0x04 /* Intern lpback */
264 #define MREGS_UTEST_EXTLOOP 0x02 /* Extern lpback */
265 #define MREGS_UTEST_NOLOOP 0x00 /* No loopback */
272 #define RXD_OWN 0x80000000 /* Ownership. */
273 #define RXD_UPDATE 0x10000000 /* Being Updated? */
274 #define RXD_LENGTH 0x000007ff /* Packet Length. */
281 #define TXD_OWN 0x80000000 /* Ownership. */
282 #define TXD_SOP 0x40000000 /* Start Of Packet */
283 #define TXD_EOP 0x20000000 /* End Of Packet */
284 #define TXD_UPDATE 0x10000000 /* Being Updated? */
285 #define TXD_LENGTH 0x000007ff /* Packet Length. */
287 #define TX_RING_MAXSIZE 256
288 #define RX_RING_MAXSIZE 256
290 #define TX_RING_SIZE 16
291 #define RX_RING_SIZE 16
293 #define NEXT_RX(num) (((num) + 1) & (RX_RING_MAXSIZE - 1))
294 #define NEXT_TX(num) (((num) + 1) & (TX_RING_MAXSIZE - 1))
295 #define PREV_RX(num) (((num) - 1) & (RX_RING_MAXSIZE - 1))
296 #define PREV_TX(num) (((num) - 1) & (TX_RING_MAXSIZE - 1))
298 #define TX_BUFFS_AVAIL(qp) \
299 (((qp)->tx_old <= (qp)->tx_new) ? \
300 (qp)->tx_old + (TX_RING_SIZE - 1) - (qp)->tx_new : \
301 (qp)->tx_old - (qp)->tx_new - 1)
303 struct qe_init_block
{
304 struct qe_rxd qe_rxd
[RX_RING_MAXSIZE
];
305 struct qe_txd qe_txd
[TX_RING_MAXSIZE
];
308 #define qib_offset(mem, elem) \
309 ((__u32)((unsigned long)(&(((struct qe_init_block *)0)->mem[elem]))))
314 void __iomem
*gregs
; /* QEC Global Registers */
315 struct sunqe
*qes
[4]; /* Each child MACE */
316 unsigned int qec_bursts
; /* Support burst sizes */
317 struct platform_device
*op
; /* QEC's OF device */
318 struct sunqec
*next_module
; /* List of all QECs in system */
321 #define PKT_BUF_SZ 1664
322 #define RXD_PKT_SZ 1664
324 struct sunqe_buffers
{
325 u8 tx_buf
[TX_RING_SIZE
][PKT_BUF_SZ
];
327 u8 rx_buf
[RX_RING_SIZE
][PKT_BUF_SZ
];
330 #define qebuf_offset(mem, elem) \
331 ((__u32)((unsigned long)(&(((struct sunqe_buffers *)0)->mem[elem][0]))))
334 void __iomem
*qcregs
; /* QEC per-channel Registers */
335 void __iomem
*mregs
; /* Per-channel MACE Registers */
336 struct qe_init_block
*qe_block
; /* RX and TX descriptors */
337 __u32 qblock_dvma
; /* RX and TX descriptors */
338 spinlock_t lock
; /* Protects txfull state */
339 int rx_new
, rx_old
; /* RX ring extents */
340 int tx_new
, tx_old
; /* TX ring extents */
341 struct sunqe_buffers
*buffers
; /* CPU visible address. */
342 __u32 buffers_dvma
; /* DVMA visible address. */
343 struct sunqec
*parent
;
344 u8 mconfig
; /* Base MACE mconfig value */
345 struct platform_device
*op
; /* QE's OF device struct */
346 struct net_device
*dev
; /* QE's netdevice struct */
347 int channel
; /* Who am I? */
350 #endif /* !(_SUNQE_H) */
This page took 0.038937 seconds and 6 git commands to generate.