drivers/net/wireless/Kconfig

   1 #
   2 # Wireless LAN device configuration
   3 #
   4
   5 menu "Wireless LAN (non-hamradio)"
   6         depends on NETDEVICES
   7
   8 config NET_RADIO
   9         bool "Wireless LAN drivers (non-hamradio) & Wireless Extensions"
  10         select WIRELESS_EXT
  11         ---help---
  12           Support for wireless LANs and everything having to do with radio,
  13           but not with amateur radio or FM broadcasting.
  14
  15           Saying Y here also enables the Wireless Extensions (creates
  16           /proc/net/wireless and enables iwconfig access). The Wireless
  17           Extension is a generic API allowing a driver to expose to the user
  18           space configuration and statistics specific to common Wireless LANs.
  19           The beauty of it is that a single set of tool can support all the
  20           variations of Wireless LANs, regardless of their type (as long as
  21           the driver supports Wireless Extension). Another advantage is that
  22           these parameters may be changed on the fly without restarting the
  23           driver (or Linux). If you wish to use Wireless Extensions with
  24           wireless PCMCIA (PC-) cards, you need to say Y here; you can fetch
  25           the tools from
  26           <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
  27
  28 config NET_WIRELESS_RTNETLINK
  29         bool "Wireless Extension API over RtNetlink"
  30         depends on NET_RADIO
  31         ---help---
  32           Support the Wireless Extension API over the RtNetlink socket
  33           in addition to the traditional ioctl interface (selected above).
  34
  35           For now, few tools use this facility, but it might grow in the
  36           future. The only downside is that it adds 4.5 kB to your kernel.
  37
  38 # Note : the cards are obsolete (can't buy them anymore), but the drivers
  39 # are not, as people are still using them...
  40 comment "Obsolete Wireless cards support (pre-802.11)"
  41         depends on NET_RADIO && (INET || ISA || PCMCIA)
  42
  43 config STRIP
  44         tristate "STRIP (Metricom starmode radio IP)"
  45         depends on NET_RADIO && INET
  46         ---help---
  47           Say Y if you have a Metricom radio and intend to use Starmode Radio
  48           IP. STRIP is a radio protocol developed for the MosquitoNet project
  49           (on the WWW at <http://mosquitonet.stanford.edu/>) to send Internet
  50           traffic using Metricom radios.  Metricom radios are small, battery
  51           powered, 100kbit/sec packet radio transceivers, about the size and
  52           weight of a cellular telephone. (You may also have heard them called
  53           "Metricom modems" but we avoid the term "modem" because it misleads
  54           many people into thinking that you can plug a Metricom modem into a
  55           phone line and use it as a modem.)
  56
  57           You can use STRIP on any Linux machine with a serial port, although
  58           it is obviously most useful for people with laptop computers. If you
  59           think you might get a Metricom radio in the future, there is no harm
  60           in saying Y to STRIP now, except that it makes the kernel a bit
  61           bigger.
  62
  63           To compile this as a module, choose M here: the module will be
  64           called strip.
  65
  66 config ARLAN
  67         tristate "Aironet Arlan 655 & IC2200 DS support"
  68         depends on NET_RADIO && ISA && !64BIT
  69         ---help---
  70           Aironet makes Arlan, a class of wireless LAN adapters. These use the
  71           www.Telxon.com chip, which is also used on several similar cards.
  72           This driver is tested on the 655 and IC2200 series cards. Look at
  73           <http://www.ylenurme.ee/~elmer/655/> for the latest information.
  74
  75           The driver is built as two modules, arlan and arlan-proc. The latter
  76           is the /proc interface and is not needed most of time.
  77
  78           On some computers the card ends up in non-valid state after some
  79           time. Use a ping-reset script to clear it.
  80
  81 config WAVELAN
  82         tristate "AT&T/Lucent old WaveLAN & DEC RoamAbout DS ISA support"
  83         depends on NET_RADIO && ISA
  84         ---help---
  85           The Lucent WaveLAN (formerly NCR and AT&T; or DEC RoamAbout DS) is
  86           a Radio LAN (wireless Ethernet-like Local Area Network) using the
  87           radio frequencies 900 MHz and 2.4 GHz.
  88
  89           This driver support the ISA version of the WaveLAN card.  A separate
  90           driver for the PCMCIA (PC-card) hardware is available in David
  91           Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
  92           for location).
  93
  94           If you want to use an ISA WaveLAN card under Linux, say Y and read
  95           the Ethernet-HOWTO, available from
  96           <http://www.tldp.org/docs.html#howto>. Some more specific
  97           information is contained in
  98           <file:Documentation/networking/wavelan.txt> and in the source code
  99           <file:drivers/net/wavelan.p.h>.
 100
 101           You will also need the wireless tools package available from
 102           <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
 103           Please read the man pages contained therein.
 104
 105           To compile this driver as a module, choose M here: the module will be
 106           called wavelan.
 107
 108 config PCMCIA_WAVELAN
 109         tristate "AT&T/Lucent old WaveLAN Pcmcia wireless support"
 110         depends on NET_RADIO && PCMCIA
 111         help
 112           Say Y here if you intend to attach an AT&T/Lucent Wavelan PCMCIA
 113           (PC-card) wireless Ethernet networking card to your computer.  This
 114           driver is for the non-IEEE-802.11 Wavelan cards.
 115
 116           To compile this driver as a module, choose M here: the module will be
 117           called wavelan_cs.  If unsure, say N.
 118
 119 config PCMCIA_NETWAVE
 120         tristate "Xircom Netwave AirSurfer Pcmcia wireless support"
 121         depends on NET_RADIO && PCMCIA
 122         help
 123           Say Y here if you intend to attach this type of PCMCIA (PC-card)
 124           wireless Ethernet networking card to your computer.
 125
 126           To compile this driver as a module, choose M here: the module will be
 127           called netwave_cs.  If unsure, say N.
 128
 129 comment "Wireless 802.11 Frequency Hopping cards support"
 130         depends on NET_RADIO && PCMCIA
 131
 132 config PCMCIA_RAYCS
 133         tristate "Aviator/Raytheon 2.4MHz wireless support"
 134         depends on NET_RADIO && PCMCIA
 135         ---help---
 136           Say Y here if you intend to attach an Aviator/Raytheon PCMCIA
 137           (PC-card) wireless Ethernet networking card to your computer.
 138           Please read the file <file:Documentation/networking/ray_cs.txt> for
 139           details.
 140
 141           To compile this driver as a module, choose M here: the module will be
 142           called ray_cs.  If unsure, say N.
 143
 144 comment "Wireless 802.11b ISA/PCI cards support"
 145         depends on NET_RADIO && (ISA || PCI || PPC_PMAC || PCMCIA)
 146
 147 config IPW2100
 148         tristate "Intel PRO/Wireless 2100 Network Connection"
 149         depends on NET_RADIO && PCI
 150         select FW_LOADER
 151         select IEEE80211
 152         ---help---
 153           A driver for the Intel PRO/Wireless 2100 Network
 154           Connection 802.11b wireless network adapter.
 155
 156           See <file:Documentation/networking/README.ipw2100> for information on
 157           the capabilities currently enabled in this driver and for tips
 158           for debugging issues and problems.
 159
 160           In order to use this driver, you will need a firmware image for it.
 161           You can obtain the firmware from
 162           <http://ipw2100.sf.net/>.  Once you have the firmware image, you
 163           will need to place it in /lib/firmware.
 164
 165           You will also very likely need the Wireless Tools in order to
 166           configure your card:
 167
 168           <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
 169
 170           If you want to compile the driver as a module ( = code which can be
 171           inserted in and removed from the running kernel whenever you want),
 172           say M here and read <file:Documentation/modules.txt>.  The module
 173           will be called ipw2100.ko.
 174
 175 config IPW2100_MONITOR
 176         bool "Enable promiscuous mode"
 177         depends on IPW2100
 178         ---help---
 179           Enables promiscuous/monitor mode support for the ipw2100 driver.
 180           With this feature compiled into the driver, you can switch to
 181           promiscuous mode via the Wireless Tool's Monitor mode.  While in this
 182           mode, no packets can be sent.
 183
 184 config IPW2100_DEBUG
 185         bool "Enable full debugging output in IPW2100 module."
 186         depends on IPW2100
 187         ---help---
 188           This option will enable debug tracing output for the IPW2100.
 189
 190           This will result in the kernel module being ~60k larger.  You can
 191           control which debug output is sent to the kernel log by setting the
 192           value in
 193
 194           /sys/bus/pci/drivers/ipw2100/debug_level
 195
 196           This entry will only exist if this option is enabled.
 197
 198           If you are not trying to debug or develop the IPW2100 driver, you
 199           most likely want to say N here.
 200
 201 config IPW2200
 202         tristate "Intel PRO/Wireless 2200BG and 2915ABG Network Connection"
 203         depends on NET_RADIO && PCI
 204         select FW_LOADER
 205         select IEEE80211
 206         ---help---
 207           A driver for the Intel PRO/Wireless 2200BG and 2915ABG Network
 208           Connection adapters.
 209
 210           See <file:Documentation/networking/README.ipw2200> for
 211           information on the capabilities currently enabled in this
 212           driver and for tips for debugging issues and problems.
 213
 214           In order to use this driver, you will need a firmware image for it.
 215           You can obtain the firmware from
 216           <http://ipw2200.sf.net/>.  See the above referenced README.ipw2200
 217           for information on where to install the firmware images.
 218
 219           You will also very likely need the Wireless Tools in order to
 220           configure your card:
 221
 222           <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
 223
 224           If you want to compile the driver as a module ( = code which can be
 225           inserted in and removed from the running kernel whenever you want),
 226           say M here and read <file:Documentation/modules.txt>.  The module
 227           will be called ipw2200.ko.
 228
 229 config IPW2200_MONITOR
 230         bool "Enable promiscuous mode"
 231         depends on IPW2200
 232         ---help---
 233           Enables promiscuous/monitor mode support for the ipw2200 driver.
 234           With this feature compiled into the driver, you can switch to
 235           promiscuous mode via the Wireless Tool's Monitor mode.  While in this
 236           mode, no packets can be sent.
 237
 238 config IPW2200_RADIOTAP
 239         bool "Enable radiotap format 802.11 raw packet support"
 240         depends on IPW2200_MONITOR
 241
 242 config IPW2200_PROMISCUOUS
 243         bool "Enable creation of a RF radiotap promiscuous interface"
 244         depends on IPW2200_MONITOR
 245         select IPW2200_RADIOTAP
 246         ---help---
 247           Enables the creation of a second interface prefixed 'rtap'.
 248           This second interface will provide every received in radiotap
 249           format.
 250
 251           This is useful for performing wireless network analysis while
 252           maintaining an active association.
 253
 254           Example usage:
 255
 256             % modprobe ipw2200 rtap_iface=1
 257             % ifconfig rtap0 up
 258             % tethereal -i rtap0
 259
 260           If you do not specify 'rtap_iface=1' as a module parameter then
 261           the rtap interface will not be created and you will need to turn
 262           it on via sysfs:
 263
 264             % echo 1 > /sys/bus/pci/drivers/ipw2200/*/rtap_iface
 265
 266 config IPW2200_QOS
 267         bool "Enable QoS support"
 268         depends on IPW2200 && EXPERIMENTAL
 269
 270 config IPW2200_DEBUG
 271         bool "Enable full debugging output in IPW2200 module."
 272         depends on IPW2200
 273         ---help---
 274           This option will enable debug tracing output for the IPW2200.
 275
 276           This will result in the kernel module being ~100k larger.  You can
 277           control which debug output is sent to the kernel log by setting the
 278           value in
 279
 280           /sys/bus/pci/drivers/ipw2200/debug_level
 281
 282           This entry will only exist if this option is enabled.
 283
 284           To set a value, simply echo an 8-byte hex value to the same file:
 285
 286           % echo 0x00000FFO > /sys/bus/pci/drivers/ipw2200/debug_level
 287
 288           You can find the list of debug mask values in
 289           drivers/net/wireless/ipw2200.h
 290
 291           If you are not trying to debug or develop the IPW2200 driver, you
 292           most likely want to say N here.
 293
 294 config AIRO
 295         tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
 296         depends on NET_RADIO && ISA_DMA_API && (PCI || BROKEN)
 297         select CRYPTO
 298         ---help---
 299           This is the standard Linux driver to support Cisco/Aironet ISA and
 300           PCI 802.11 wireless cards.
 301           It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
 302           - with or without encryption) as well as card before the Cisco
 303           acquisition (Aironet 4500, Aironet 4800, Aironet 4800B).
 304
 305           This driver support both the standard Linux Wireless Extensions
 306           and Cisco proprietary API, so both the Linux Wireless Tools and the
 307           Cisco Linux utilities can be used to configure the card.
 308
 309           The driver can be compiled as a module and will be named "airo".
 310
 311 config HERMES
 312         tristate "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)"
 313         depends on NET_RADIO && (PPC_PMAC || PCI || PCMCIA)
 314         ---help---
 315           A driver for 802.11b wireless cards based based on the "Hermes" or
 316           Intersil HFA384x (Prism 2) MAC controller.  This includes the vast
 317           majority of the PCMCIA 802.11b cards (which are nearly all rebadges)
 318           - except for the Cisco/Aironet cards.  Cards supported include the
 319           Apple Airport (not a PCMCIA card), WavelanIEEE/Orinoco,
 320           Cabletron/EnteraSys Roamabout, ELSA AirLancer, MELCO Buffalo, Avaya,
 321           IBM High Rate Wireless, Farralon Syyline, Samsung MagicLAN, Netgear
 322           MA401, LinkSys WPC-11, D-Link DWL-650, 3Com AirConnect, Intel
 323           PRO/Wireless, and Symbol Spectrum24 High Rate amongst others.
 324
 325           This option includes the guts of the driver, but in order to
 326           actually use a card you will also need to enable support for PCMCIA
 327           Hermes cards, PLX9052 based PCI adaptors or the Apple Airport below.
 328
 329           You will also very likely also need the Wireless Tools in order to
 330           configure your card and that /etc/pcmcia/wireless.opts works :
 331           <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>
 332
 333 config APPLE_AIRPORT
 334         tristate "Apple Airport support (built-in)"
 335         depends on PPC_PMAC && HERMES
 336         help
 337           Say Y here to support the Airport 802.11b wireless Ethernet hardware
 338           built into the Macintosh iBook and other recent PowerPC-based
 339           Macintosh machines. This is essentially a Lucent Orinoco card with
 340           a non-standard interface.
 341
 342           This driver does not support the Airport Extreme (802.11b/g). Use
 343           the BCM43xx driver for Airport Extreme cards.
 344
 345 config PLX_HERMES
 346         tristate "Hermes in PLX9052 based PCI adaptor support (Netgear MA301 etc.)"
 347         depends on PCI && HERMES
 348         help
 349           Enable support for PCMCIA cards supported by the "Hermes" (aka
 350           orinoco) driver when used in PLX9052 based PCI adaptors.  These
 351           adaptors are not a full PCMCIA controller but act as a more limited
 352           PCI <-> PCMCIA bridge.  Several vendors sell such adaptors so that
 353           802.11b PCMCIA cards can be used in desktop machines.  The Netgear
 354           MA301 is such an adaptor.
 355
 356 config TMD_HERMES
 357         tristate "Hermes in TMD7160 based PCI adaptor support"
 358         depends on PCI && HERMES
 359         help
 360           Enable support for PCMCIA cards supported by the "Hermes" (aka
 361           orinoco) driver when used in TMD7160 based PCI adaptors.  These
 362           adaptors are not a full PCMCIA controller but act as a more limited
 363           PCI <-> PCMCIA bridge.  Several vendors sell such adaptors so that
 364           802.11b PCMCIA cards can be used in desktop machines.
 365
 366 config NORTEL_HERMES
 367         tristate "Nortel emobility PCI adaptor support"
 368         depends on PCI && HERMES
 369         help
 370           Enable support for PCMCIA cards supported by the "Hermes" (aka
 371           orinoco) driver when used in Nortel emobility PCI adaptors.  These
 372           adaptors are not full PCMCIA controllers, but act as a more limited
 373           PCI <-> PCMCIA bridge.
 374
 375 config PCI_HERMES
 376         tristate "Prism 2.5 PCI 802.11b adaptor support"
 377         depends on PCI && HERMES
 378         help
 379           Enable support for PCI and mini-PCI 802.11b wireless NICs based on
 380           the Prism 2.5 chipset.  These are true PCI cards, not the 802.11b
 381           PCMCIA cards bundled with PCI<->PCMCIA adaptors which are also
 382           common.  Some of the built-in wireless adaptors in laptops are of
 383           this variety.
 384
 385 config ATMEL
 386       tristate "Atmel at76c50x chipset  802.11b support"
 387       depends on NET_RADIO && (PCI || PCMCIA)
 388       select FW_LOADER
 389       select CRC32
 390        ---help---
 391         A driver 802.11b wireless cards based on the Atmel fast-vnet
 392         chips. This driver supports standard Linux wireless extensions.
 393
 394         Many  cards based on this chipset do not have flash memory
 395         and need their firmware loaded at start-up. If yours is
 396         one of these, you will need to provide a firmware image
 397         to be loaded into the card by the driver. The Atmel
 398         firmware package can be downloaded from
 399         <http://www.thekelleys.org.uk/atmel>
 400
 401 config PCI_ATMEL
 402       tristate "Atmel at76c506 PCI cards"
 403       depends on ATMEL && PCI
 404        ---help---
 405         Enable support for PCI and mini-PCI cards containing the
 406         Atmel at76c506 chip.
 407
 408 # If Pcmcia is compiled in, offer Pcmcia cards...
 409 comment "Wireless 802.11b Pcmcia/Cardbus cards support"
 410         depends on NET_RADIO && PCMCIA
 411
 412 config PCMCIA_HERMES
 413         tristate "Hermes PCMCIA card support"
 414         depends on NET_RADIO && PCMCIA && HERMES
 415         ---help---
 416           A driver for "Hermes" chipset based PCMCIA wireless adaptors, such
 417           as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/
 418           EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and
 419           others).  It should also be usable on various Prism II based cards
 420           such as the Linksys, D-Link and Farallon Skyline.  It should also
 421           work on Symbol cards such as the 3Com AirConnect and Ericsson WLAN.
 422
 423           To use your PC-cards, you will need supporting software from David
 424           Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
 425           for location).  You also want to check out the PCMCIA-HOWTO,
 426           available from <http://www.tldp.org/docs.html#howto>.
 427
 428           You will also very likely also need the Wireless Tools in order to
 429           configure your card and that /etc/pcmcia/wireless.opts works:
 430           <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
 431
 432 config PCMCIA_SPECTRUM
 433         tristate "Symbol Spectrum24 Trilogy PCMCIA card support"
 434         depends on NET_RADIO && PCMCIA && HERMES
 435         select FW_LOADER
 436         ---help---
 437
 438           This is a driver for 802.11b cards using RAM-loadable Symbol
 439           firmware, such as Symbol Wireless Networker LA4100, CompactFlash
 440           cards by Socket Communications and Intel PRO/Wireless 2011B.
 441
 442           This driver requires firmware download on startup.  Utilities
 443           for downloading Symbol firmware are available at
 444           <http://sourceforge.net/projects/orinoco/>
 445
 446 config AIRO_CS
 447         tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
 448         depends on NET_RADIO && PCMCIA && (BROKEN || !M32R)
 449         select CRYPTO
 450         select CRYPTO_AES
 451         ---help---
 452           This is the standard Linux driver to support Cisco/Aironet PCMCIA
 453           802.11 wireless cards.  This driver is the same as the Aironet
 454           driver part of the Linux Pcmcia package.
 455           It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
 456           - with or without encryption) as well as card before the Cisco
 457           acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also
 458           supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom
 459           802.11b cards.
 460
 461           This driver support both the standard Linux Wireless Extensions
 462           and Cisco proprietary API, so both the Linux Wireless Tools and the
 463           Cisco Linux utilities can be used to configure the card.
 464
 465           To use your PC-cards, you will need supporting software from David
 466           Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
 467           for location).  You also want to check out the PCMCIA-HOWTO,
 468           available from <http://www.tldp.org/docs.html#howto>.
 469
 470 config PCMCIA_ATMEL
 471         tristate "Atmel at76c502/at76c504 PCMCIA cards"
 472         depends on NET_RADIO && ATMEL && PCMCIA
 473         select FW_LOADER
 474         select CRC32
 475         ---help---
 476           Enable support for PCMCIA cards containing the
 477           Atmel at76c502 and at76c504 chips.
 478
 479 config PCMCIA_WL3501
 480       tristate "Planet WL3501 PCMCIA cards"
 481       depends on NET_RADIO && EXPERIMENTAL && PCMCIA
 482        ---help---
 483          A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet.
 484          It has basic support for Linux wireless extensions and initial
 485          micro support for ethtool.
 486
 487 comment "Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support"
 488         depends on NET_RADIO && PCI
 489 config PRISM54
 490         tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus'
 491         depends on PCI && NET_RADIO && EXPERIMENTAL
 492         select FW_LOADER
 493         ---help---
 494           Enable PCI and Cardbus support for the following chipset based cards:
 495
 496           ISL3880 - Prism GT            802.11 b/g
 497           ISL3877 - Prism Indigo        802.11 a
 498           ISL3890 - Prism Duette        802.11 a/b/g
 499
 500           For a complete list of supported cards visit <http://prism54.org>.
 501           Here is the latest confirmed list of supported cards:
 502
 503           3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72 (version 1)
 504           Allnet ALL0271 PCI Card
 505           Compex WL54G Cardbus Card
 506           Corega CG-WLCB54GT Cardbus Card
 507           D-Link Air Plus Xtreme G A1 Cardbus Card aka DWL-g650
 508           I-O Data WN-G54/CB Cardbus Card
 509           Kobishi XG-300 aka Z-Com Cardbus Card
 510           Netgear WG511 Cardbus Card
 511           Ovislink WL-5400PCI PCI Card
 512           Peabird WLG-PCI PCI Card
 513           Sitecom WL-100i Cardbus Card
 514           Sitecom WL-110i PCI Card
 515           SMC2802W -    EZ Connect g 2.4GHz 54 Mbps Wireless PCI Card
 516           SMC2835W -    EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card
 517           SMC2835W-V2 - EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card
 518           Z-Com XG-900 PCI Card
 519           Zyxel G-100 Cardbus Card
 520
 521           If you enable this you will need a firmware file as well.
 522           You will need to copy this to /usr/lib/hotplug/firmware/isl3890.
 523           You can get this non-GPL'd firmware file from the Prism54 project page:
 524           <http://prism54.org>
 525           You will also need the /etc/hotplug/firmware.agent script from
 526           a current hotplug package.
 527
 528           Note: You need a motherboard with DMA support to use any of these cards
 529
 530           If you want to compile the driver as a module ( = code which can be
 531           inserted in and removed from the running kernel whenever you want),
 532           say M here and read <file:Documentation/modules.txt>.  The module
 533           will be called prism54.ko.
 534
 535 config USB_ZD1201
 536         tristate "USB ZD1201 based Wireless device support"
 537         depends on USB && NET_RADIO
 538         select FW_LOADER
 539         ---help---
 540           Say Y if you want to use wireless LAN adapters based on the ZyDAS
 541           ZD1201 chip.
 542
 543           This driver makes the adapter appear as a normal Ethernet interface,
 544           typically on wlan0.
 545
 546           The zd1201 device requires external firmware to be loaded.
 547           This can be found at http://linux-lc100020.sourceforge.net/
 548
 549           To compile this driver as a module, choose M here: the
 550           module will be called zd1201.
 551
 552 source "drivers/net/wireless/hostap/Kconfig"
 553 source "drivers/net/wireless/bcm43xx/Kconfig"
 554 source "drivers/net/wireless/zd1211rw/Kconfig"
 555
 556 # yes, this works even when no drivers are selected
 557 config NET_WIRELESS
 558         bool
 559         depends on NET_RADIO && (ISA || PCI || PPC_PMAC || PCMCIA)
 560         default y
 561
 562 endmenu
 563