2 * Copyright (c) 2008 Atheros Communications Inc.
4 * Permission to use, copy, modify, and/or distribute this software for any
5 * purpose with or without fee is hereby granted, provided that the above
6 * copyright notice and this permission notice appear in all copies.
8 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
9 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
10 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
11 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
12 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
13 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
14 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
17 #include <linux/nl80211.h>
20 #define ATH_PCI_VERSION "0.1"
22 static char *dev_info
= "ath9k";
24 MODULE_AUTHOR("Atheros Communications");
25 MODULE_DESCRIPTION("Support for Atheros 802.11n wireless LAN cards.");
26 MODULE_SUPPORTED_DEVICE("Atheros 802.11n WLAN cards");
27 MODULE_LICENSE("Dual BSD/GPL");
29 /* We use the hw_value as an index into our private channel structure */
31 #define CHAN2G(_freq, _idx) { \
32 .center_freq = (_freq), \
37 #define CHAN5G(_freq, _idx) { \
38 .band = IEEE80211_BAND_5GHZ, \
39 .center_freq = (_freq), \
44 /* Some 2 GHz radios are actually tunable on 2312-2732
45 * on 5 MHz steps, we support the channels which we know
46 * we have calibration data for all cards though to make
48 static struct ieee80211_channel ath9k_2ghz_chantable
[] = {
49 CHAN2G(2412, 0), /* Channel 1 */
50 CHAN2G(2417, 1), /* Channel 2 */
51 CHAN2G(2422, 2), /* Channel 3 */
52 CHAN2G(2427, 3), /* Channel 4 */
53 CHAN2G(2432, 4), /* Channel 5 */
54 CHAN2G(2437, 5), /* Channel 6 */
55 CHAN2G(2442, 6), /* Channel 7 */
56 CHAN2G(2447, 7), /* Channel 8 */
57 CHAN2G(2452, 8), /* Channel 9 */
58 CHAN2G(2457, 9), /* Channel 10 */
59 CHAN2G(2462, 10), /* Channel 11 */
60 CHAN2G(2467, 11), /* Channel 12 */
61 CHAN2G(2472, 12), /* Channel 13 */
62 CHAN2G(2484, 13), /* Channel 14 */
65 /* Some 5 GHz radios are actually tunable on XXXX-YYYY
66 * on 5 MHz steps, we support the channels which we know
67 * we have calibration data for all cards though to make
69 static struct ieee80211_channel ath9k_5ghz_chantable
[] = {
70 /* _We_ call this UNII 1 */
71 CHAN5G(5180, 14), /* Channel 36 */
72 CHAN5G(5200, 15), /* Channel 40 */
73 CHAN5G(5220, 16), /* Channel 44 */
74 CHAN5G(5240, 17), /* Channel 48 */
75 /* _We_ call this UNII 2 */
76 CHAN5G(5260, 18), /* Channel 52 */
77 CHAN5G(5280, 19), /* Channel 56 */
78 CHAN5G(5300, 20), /* Channel 60 */
79 CHAN5G(5320, 21), /* Channel 64 */
80 /* _We_ call this "Middle band" */
81 CHAN5G(5500, 22), /* Channel 100 */
82 CHAN5G(5520, 23), /* Channel 104 */
83 CHAN5G(5540, 24), /* Channel 108 */
84 CHAN5G(5560, 25), /* Channel 112 */
85 CHAN5G(5580, 26), /* Channel 116 */
86 CHAN5G(5600, 27), /* Channel 120 */
87 CHAN5G(5620, 28), /* Channel 124 */
88 CHAN5G(5640, 29), /* Channel 128 */
89 CHAN5G(5660, 30), /* Channel 132 */
90 CHAN5G(5680, 31), /* Channel 136 */
91 CHAN5G(5700, 32), /* Channel 140 */
92 /* _We_ call this UNII 3 */
93 CHAN5G(5745, 33), /* Channel 149 */
94 CHAN5G(5765, 34), /* Channel 153 */
95 CHAN5G(5785, 35), /* Channel 157 */
96 CHAN5G(5805, 36), /* Channel 161 */
97 CHAN5G(5825, 37), /* Channel 165 */
100 static void ath_cache_conf_rate(struct ath_softc
*sc
,
101 struct ieee80211_conf
*conf
)
103 switch (conf
->channel
->band
) {
104 case IEEE80211_BAND_2GHZ
:
105 if (conf_is_ht20(conf
))
107 sc
->hw_rate_table
[ATH9K_MODE_11NG_HT20
];
108 else if (conf_is_ht40_minus(conf
))
110 sc
->hw_rate_table
[ATH9K_MODE_11NG_HT40MINUS
];
111 else if (conf_is_ht40_plus(conf
))
113 sc
->hw_rate_table
[ATH9K_MODE_11NG_HT40PLUS
];
116 sc
->hw_rate_table
[ATH9K_MODE_11G
];
118 case IEEE80211_BAND_5GHZ
:
119 if (conf_is_ht20(conf
))
121 sc
->hw_rate_table
[ATH9K_MODE_11NA_HT20
];
122 else if (conf_is_ht40_minus(conf
))
124 sc
->hw_rate_table
[ATH9K_MODE_11NA_HT40MINUS
];
125 else if (conf_is_ht40_plus(conf
))
127 sc
->hw_rate_table
[ATH9K_MODE_11NA_HT40PLUS
];
130 sc
->hw_rate_table
[ATH9K_MODE_11A
];
138 static void ath_update_txpow(struct ath_softc
*sc
)
140 struct ath_hal
*ah
= sc
->sc_ah
;
143 if (sc
->curtxpow
!= sc
->config
.txpowlimit
) {
144 ath9k_hw_set_txpowerlimit(ah
, sc
->config
.txpowlimit
);
145 /* read back in case value is clamped */
146 ath9k_hw_getcapability(ah
, ATH9K_CAP_TXPOW
, 1, &txpow
);
147 sc
->curtxpow
= txpow
;
151 static u8
parse_mpdudensity(u8 mpdudensity
)
154 * 802.11n D2.0 defined values for "Minimum MPDU Start Spacing":
155 * 0 for no restriction
164 switch (mpdudensity
) {
170 /* Our lower layer calculations limit our precision to
186 static void ath_setup_rates(struct ath_softc
*sc
, enum ieee80211_band band
)
188 struct ath_rate_table
*rate_table
= NULL
;
189 struct ieee80211_supported_band
*sband
;
190 struct ieee80211_rate
*rate
;
194 case IEEE80211_BAND_2GHZ
:
195 rate_table
= sc
->hw_rate_table
[ATH9K_MODE_11G
];
197 case IEEE80211_BAND_5GHZ
:
198 rate_table
= sc
->hw_rate_table
[ATH9K_MODE_11A
];
204 if (rate_table
== NULL
)
207 sband
= &sc
->sbands
[band
];
208 rate
= sc
->rates
[band
];
210 if (rate_table
->rate_cnt
> ATH_RATE_MAX
)
211 maxrates
= ATH_RATE_MAX
;
213 maxrates
= rate_table
->rate_cnt
;
215 for (i
= 0; i
< maxrates
; i
++) {
216 rate
[i
].bitrate
= rate_table
->info
[i
].ratekbps
/ 100;
217 rate
[i
].hw_value
= rate_table
->info
[i
].ratecode
;
218 if (rate_table
->info
[i
].short_preamble
) {
219 rate
[i
].hw_value_short
= rate_table
->info
[i
].ratecode
|
220 rate_table
->info
[i
].short_preamble
;
221 rate
[i
].flags
= IEEE80211_RATE_SHORT_PREAMBLE
;
225 DPRINTF(sc
, ATH_DBG_CONFIG
, "Rate: %2dMbps, ratecode: %2d\n",
226 rate
[i
].bitrate
/ 10, rate
[i
].hw_value
);
231 * Set/change channels. If the channel is really being changed, it's done
232 * by reseting the chip. To accomplish this we must first cleanup any pending
233 * DMA, then restart stuff.
235 static int ath_set_channel(struct ath_softc
*sc
, struct ath9k_channel
*hchan
)
237 struct ath_hal
*ah
= sc
->sc_ah
;
238 bool fastcc
= true, stopped
;
239 struct ieee80211_hw
*hw
= sc
->hw
;
240 struct ieee80211_channel
*channel
= hw
->conf
.channel
;
243 if (sc
->sc_flags
& SC_OP_INVALID
)
249 * This is only performed if the channel settings have
252 * To switch channels clear any pending DMA operations;
253 * wait long enough for the RX fifo to drain, reset the
254 * hardware at the new frequency, and then re-enable
255 * the relevant bits of the h/w.
257 ath9k_hw_set_interrupts(ah
, 0);
258 ath_drain_all_txq(sc
, false);
259 stopped
= ath_stoprecv(sc
);
261 /* XXX: do not flush receive queue here. We don't want
262 * to flush data frames already in queue because of
263 * changing channel. */
265 if (!stopped
|| (sc
->sc_flags
& SC_OP_FULL_RESET
))
268 DPRINTF(sc
, ATH_DBG_CONFIG
,
269 "(%u MHz) -> (%u MHz), chanwidth: %d\n",
270 sc
->sc_ah
->ah_curchan
->channel
,
271 channel
->center_freq
, sc
->tx_chan_width
);
273 spin_lock_bh(&sc
->sc_resetlock
);
275 r
= ath9k_hw_reset(ah
, hchan
, fastcc
);
277 DPRINTF(sc
, ATH_DBG_FATAL
,
278 "Unable to reset channel (%u Mhz) "
280 channel
->center_freq
, r
);
281 spin_unlock_bh(&sc
->sc_resetlock
);
284 spin_unlock_bh(&sc
->sc_resetlock
);
286 sc
->sc_flags
&= ~SC_OP_CHAINMASK_UPDATE
;
287 sc
->sc_flags
&= ~SC_OP_FULL_RESET
;
289 if (ath_startrecv(sc
) != 0) {
290 DPRINTF(sc
, ATH_DBG_FATAL
,
291 "Unable to restart recv logic\n");
295 ath_cache_conf_rate(sc
, &hw
->conf
);
296 ath_update_txpow(sc
);
297 ath9k_hw_set_interrupts(ah
, sc
->imask
);
298 ath9k_ps_restore(sc
);
303 * This routine performs the periodic noise floor calibration function
304 * that is used to adjust and optimize the chip performance. This
305 * takes environmental changes (location, temperature) into account.
306 * When the task is complete, it reschedules itself depending on the
307 * appropriate interval that was calculated.
309 static void ath_ani_calibrate(unsigned long data
)
311 struct ath_softc
*sc
;
313 bool longcal
= false;
314 bool shortcal
= false;
315 bool aniflag
= false;
316 unsigned int timestamp
= jiffies_to_msecs(jiffies
);
319 sc
= (struct ath_softc
*)data
;
323 * don't calibrate when we're scanning.
324 * we are most likely not on our home channel.
326 if (sc
->rx
.rxfilter
& FIF_BCN_PRBRESP_PROMISC
)
329 /* Long calibration runs independently of short calibration. */
330 if ((timestamp
- sc
->ani
.longcal_timer
) >= ATH_LONG_CALINTERVAL
) {
332 DPRINTF(sc
, ATH_DBG_ANI
, "longcal @%lu\n", jiffies
);
333 sc
->ani
.longcal_timer
= timestamp
;
336 /* Short calibration applies only while caldone is false */
337 if (!sc
->ani
.caldone
) {
338 if ((timestamp
- sc
->ani
.shortcal_timer
) >=
339 ATH_SHORT_CALINTERVAL
) {
341 DPRINTF(sc
, ATH_DBG_ANI
, "shortcal @%lu\n", jiffies
);
342 sc
->ani
.shortcal_timer
= timestamp
;
343 sc
->ani
.resetcal_timer
= timestamp
;
346 if ((timestamp
- sc
->ani
.resetcal_timer
) >=
347 ATH_RESTART_CALINTERVAL
) {
348 sc
->ani
.caldone
= ath9k_hw_reset_calvalid(ah
);
350 sc
->ani
.resetcal_timer
= timestamp
;
354 /* Verify whether we must check ANI */
355 if ((timestamp
- sc
->ani
.checkani_timer
) >=
356 ATH_ANI_POLLINTERVAL
) {
358 sc
->ani
.checkani_timer
= timestamp
;
361 /* Skip all processing if there's nothing to do. */
362 if (longcal
|| shortcal
|| aniflag
) {
363 /* Call ANI routine if necessary */
365 ath9k_hw_ani_monitor(ah
, &sc
->nodestats
,
368 /* Perform calibration if necessary */
369 if (longcal
|| shortcal
) {
370 bool iscaldone
= false;
372 if (ath9k_hw_calibrate(ah
, ah
->ah_curchan
,
373 sc
->rx_chainmask
, longcal
,
376 sc
->ani
.noise_floor
=
377 ath9k_hw_getchan_noise(ah
,
380 DPRINTF(sc
, ATH_DBG_ANI
,
381 "calibrate chan %u/%x nf: %d\n",
382 ah
->ah_curchan
->channel
,
383 ah
->ah_curchan
->channelFlags
,
384 sc
->ani
.noise_floor
);
386 DPRINTF(sc
, ATH_DBG_ANY
,
387 "calibrate chan %u/%x failed\n",
388 ah
->ah_curchan
->channel
,
389 ah
->ah_curchan
->channelFlags
);
391 sc
->ani
.caldone
= iscaldone
;
396 * Set timer interval based on previous results.
397 * The interval must be the shortest necessary to satisfy ANI,
398 * short calibration and long calibration.
400 cal_interval
= ATH_LONG_CALINTERVAL
;
401 if (sc
->sc_ah
->ah_config
.enable_ani
)
402 cal_interval
= min(cal_interval
, (u32
)ATH_ANI_POLLINTERVAL
);
403 if (!sc
->ani
.caldone
)
404 cal_interval
= min(cal_interval
, (u32
)ATH_SHORT_CALINTERVAL
);
406 mod_timer(&sc
->ani
.timer
, jiffies
+ msecs_to_jiffies(cal_interval
));
410 * Update tx/rx chainmask. For legacy association,
411 * hard code chainmask to 1x1, for 11n association, use
412 * the chainmask configuration, for bt coexistence, use
413 * the chainmask configuration even in legacy mode.
415 static void ath_update_chainmask(struct ath_softc
*sc
, int is_ht
)
417 sc
->sc_flags
|= SC_OP_CHAINMASK_UPDATE
;
419 (sc
->sc_ah
->ah_caps
.hw_caps
& ATH9K_HW_CAP_BT_COEX
)) {
420 sc
->tx_chainmask
= sc
->sc_ah
->ah_caps
.tx_chainmask
;
421 sc
->rx_chainmask
= sc
->sc_ah
->ah_caps
.rx_chainmask
;
423 sc
->tx_chainmask
= 1;
424 sc
->rx_chainmask
= 1;
427 DPRINTF(sc
, ATH_DBG_CONFIG
, "tx chmask: %d, rx chmask: %d\n",
428 sc
->tx_chainmask
, sc
->rx_chainmask
);
431 static void ath_node_attach(struct ath_softc
*sc
, struct ieee80211_sta
*sta
)
435 an
= (struct ath_node
*)sta
->drv_priv
;
437 if (sc
->sc_flags
& SC_OP_TXAGGR
)
438 ath_tx_node_init(sc
, an
);
440 an
->maxampdu
= 1 << (IEEE80211_HTCAP_MAXRXAMPDU_FACTOR
+
441 sta
->ht_cap
.ampdu_factor
);
442 an
->mpdudensity
= parse_mpdudensity(sta
->ht_cap
.ampdu_density
);
445 static void ath_node_detach(struct ath_softc
*sc
, struct ieee80211_sta
*sta
)
447 struct ath_node
*an
= (struct ath_node
*)sta
->drv_priv
;
449 if (sc
->sc_flags
& SC_OP_TXAGGR
)
450 ath_tx_node_cleanup(sc
, an
);
453 static void ath9k_tasklet(unsigned long data
)
455 struct ath_softc
*sc
= (struct ath_softc
*)data
;
456 u32 status
= sc
->intrstatus
;
458 if (status
& ATH9K_INT_FATAL
) {
459 /* need a chip reset */
460 ath_reset(sc
, false);
465 (ATH9K_INT_RX
| ATH9K_INT_RXEOL
| ATH9K_INT_RXORN
)) {
466 spin_lock_bh(&sc
->rx
.rxflushlock
);
467 ath_rx_tasklet(sc
, 0);
468 spin_unlock_bh(&sc
->rx
.rxflushlock
);
470 /* XXX: optimize this */
471 if (status
& ATH9K_INT_TX
)
475 /* re-enable hardware interrupt */
476 ath9k_hw_set_interrupts(sc
->sc_ah
, sc
->imask
);
479 irqreturn_t
ath_isr(int irq
, void *dev
)
481 struct ath_softc
*sc
= dev
;
482 struct ath_hal
*ah
= sc
->sc_ah
;
483 enum ath9k_int status
;
487 if (sc
->sc_flags
& SC_OP_INVALID
) {
489 * The hardware is not ready/present, don't
490 * touch anything. Note this can happen early
491 * on if the IRQ is shared.
495 if (!ath9k_hw_intrpend(ah
)) { /* shared irq, not for us */
500 * Figure out the reason(s) for the interrupt. Note
501 * that the hal returns a pseudo-ISR that may include
502 * bits we haven't explicitly enabled so we mask the
503 * value to insure we only process bits we requested.
505 ath9k_hw_getisr(ah
, &status
); /* NB: clears ISR too */
507 status
&= sc
->imask
; /* discard unasked-for bits */
510 * If there are no status bits set, then this interrupt was not
511 * for me (should have been caught above).
516 sc
->intrstatus
= status
;
518 if (status
& ATH9K_INT_FATAL
) {
519 /* need a chip reset */
521 } else if (status
& ATH9K_INT_RXORN
) {
522 /* need a chip reset */
525 if (status
& ATH9K_INT_SWBA
) {
526 /* schedule a tasklet for beacon handling */
527 tasklet_schedule(&sc
->bcon_tasklet
);
529 if (status
& ATH9K_INT_RXEOL
) {
531 * NB: the hardware should re-read the link when
532 * RXE bit is written, but it doesn't work
533 * at least on older hardware revs.
538 if (status
& ATH9K_INT_TXURN
)
539 /* bump tx trigger level */
540 ath9k_hw_updatetxtriglevel(ah
, true);
541 /* XXX: optimize this */
542 if (status
& ATH9K_INT_RX
)
544 if (status
& ATH9K_INT_TX
)
546 if (status
& ATH9K_INT_BMISS
)
548 /* carrier sense timeout */
549 if (status
& ATH9K_INT_CST
)
551 if (status
& ATH9K_INT_MIB
) {
553 * Disable interrupts until we service the MIB
554 * interrupt; otherwise it will continue to
557 ath9k_hw_set_interrupts(ah
, 0);
559 * Let the hal handle the event. We assume
560 * it will clear whatever condition caused
563 ath9k_hw_procmibevent(ah
, &sc
->nodestats
);
564 ath9k_hw_set_interrupts(ah
, sc
->imask
);
566 if (status
& ATH9K_INT_TIM_TIMER
) {
567 if (!(ah
->ah_caps
.hw_caps
&
568 ATH9K_HW_CAP_AUTOSLEEP
)) {
569 /* Clear RxAbort bit so that we can
571 ath9k_hw_setpower(ah
, ATH9K_PM_AWAKE
);
572 ath9k_hw_setrxabort(ah
, 0);
574 sc
->sc_flags
|= SC_OP_WAIT_FOR_BEACON
;
580 ath_debug_stat_interrupt(sc
, status
);
583 /* turn off every interrupt except SWBA */
584 ath9k_hw_set_interrupts(ah
, (sc
->imask
& ATH9K_INT_SWBA
));
585 tasklet_schedule(&sc
->intr_tq
);
591 static u32
ath_get_extchanmode(struct ath_softc
*sc
,
592 struct ieee80211_channel
*chan
,
593 enum nl80211_channel_type channel_type
)
597 switch (chan
->band
) {
598 case IEEE80211_BAND_2GHZ
:
599 switch(channel_type
) {
600 case NL80211_CHAN_NO_HT
:
601 case NL80211_CHAN_HT20
:
602 chanmode
= CHANNEL_G_HT20
;
604 case NL80211_CHAN_HT40PLUS
:
605 chanmode
= CHANNEL_G_HT40PLUS
;
607 case NL80211_CHAN_HT40MINUS
:
608 chanmode
= CHANNEL_G_HT40MINUS
;
612 case IEEE80211_BAND_5GHZ
:
613 switch(channel_type
) {
614 case NL80211_CHAN_NO_HT
:
615 case NL80211_CHAN_HT20
:
616 chanmode
= CHANNEL_A_HT20
;
618 case NL80211_CHAN_HT40PLUS
:
619 chanmode
= CHANNEL_A_HT40PLUS
;
621 case NL80211_CHAN_HT40MINUS
:
622 chanmode
= CHANNEL_A_HT40MINUS
;
633 static int ath_keyset(struct ath_softc
*sc
, u16 keyix
,
634 struct ath9k_keyval
*hk
, const u8 mac
[ETH_ALEN
])
638 status
= ath9k_hw_set_keycache_entry(sc
->sc_ah
,
639 keyix
, hk
, mac
, false);
641 return status
!= false;
644 static int ath_setkey_tkip(struct ath_softc
*sc
, u16 keyix
, const u8
*key
,
645 struct ath9k_keyval
*hk
,
651 key_txmic
= key
+ NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY
;
652 key_rxmic
= key
+ NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY
;
655 /* Group key installation */
656 memcpy(hk
->kv_mic
, key_rxmic
, sizeof(hk
->kv_mic
));
657 return ath_keyset(sc
, keyix
, hk
, addr
);
661 * data key goes at first index,
662 * the hal handles the MIC keys at index+64.
664 memcpy(hk
->kv_mic
, key_rxmic
, sizeof(hk
->kv_mic
));
665 memcpy(hk
->kv_txmic
, key_txmic
, sizeof(hk
->kv_txmic
));
666 return ath_keyset(sc
, keyix
, hk
, addr
);
669 * TX key goes at first index, RX key at +32.
670 * The hal handles the MIC keys at index+64.
672 memcpy(hk
->kv_mic
, key_txmic
, sizeof(hk
->kv_mic
));
673 if (!ath_keyset(sc
, keyix
, hk
, NULL
)) {
674 /* Txmic entry failed. No need to proceed further */
675 DPRINTF(sc
, ATH_DBG_KEYCACHE
,
676 "Setting TX MIC Key Failed\n");
680 memcpy(hk
->kv_mic
, key_rxmic
, sizeof(hk
->kv_mic
));
681 /* XXX delete tx key on failure? */
682 return ath_keyset(sc
, keyix
+ 32, hk
, addr
);
685 static int ath_reserve_key_cache_slot_tkip(struct ath_softc
*sc
)
689 for (i
= IEEE80211_WEP_NKID
; i
< sc
->keymax
/ 2; i
++) {
690 if (test_bit(i
, sc
->keymap
) ||
691 test_bit(i
+ 64, sc
->keymap
))
692 continue; /* At least one part of TKIP key allocated */
694 (test_bit(i
+ 32, sc
->keymap
) ||
695 test_bit(i
+ 64 + 32, sc
->keymap
)))
696 continue; /* At least one part of TKIP key allocated */
698 /* Found a free slot for a TKIP key */
704 static int ath_reserve_key_cache_slot(struct ath_softc
*sc
)
708 /* First, try to find slots that would not be available for TKIP. */
710 for (i
= IEEE80211_WEP_NKID
; i
< sc
->keymax
/ 4; i
++) {
711 if (!test_bit(i
, sc
->keymap
) &&
712 (test_bit(i
+ 32, sc
->keymap
) ||
713 test_bit(i
+ 64, sc
->keymap
) ||
714 test_bit(i
+ 64 + 32, sc
->keymap
)))
716 if (!test_bit(i
+ 32, sc
->keymap
) &&
717 (test_bit(i
, sc
->keymap
) ||
718 test_bit(i
+ 64, sc
->keymap
) ||
719 test_bit(i
+ 64 + 32, sc
->keymap
)))
721 if (!test_bit(i
+ 64, sc
->keymap
) &&
722 (test_bit(i
, sc
->keymap
) ||
723 test_bit(i
+ 32, sc
->keymap
) ||
724 test_bit(i
+ 64 + 32, sc
->keymap
)))
726 if (!test_bit(i
+ 64 + 32, sc
->keymap
) &&
727 (test_bit(i
, sc
->keymap
) ||
728 test_bit(i
+ 32, sc
->keymap
) ||
729 test_bit(i
+ 64, sc
->keymap
)))
733 for (i
= IEEE80211_WEP_NKID
; i
< sc
->keymax
/ 2; i
++) {
734 if (!test_bit(i
, sc
->keymap
) &&
735 test_bit(i
+ 64, sc
->keymap
))
737 if (test_bit(i
, sc
->keymap
) &&
738 !test_bit(i
+ 64, sc
->keymap
))
743 /* No partially used TKIP slots, pick any available slot */
744 for (i
= IEEE80211_WEP_NKID
; i
< sc
->keymax
; i
++) {
745 /* Do not allow slots that could be needed for TKIP group keys
746 * to be used. This limitation could be removed if we know that
747 * TKIP will not be used. */
748 if (i
>= 64 && i
< 64 + IEEE80211_WEP_NKID
)
751 if (i
>= 32 && i
< 32 + IEEE80211_WEP_NKID
)
753 if (i
>= 64 + 32 && i
< 64 + 32 + IEEE80211_WEP_NKID
)
757 if (!test_bit(i
, sc
->keymap
))
758 return i
; /* Found a free slot for a key */
761 /* No free slot found */
765 static int ath_key_config(struct ath_softc
*sc
,
766 struct ieee80211_sta
*sta
,
767 struct ieee80211_key_conf
*key
)
769 struct ath9k_keyval hk
;
770 const u8
*mac
= NULL
;
774 memset(&hk
, 0, sizeof(hk
));
778 hk
.kv_type
= ATH9K_CIPHER_WEP
;
781 hk
.kv_type
= ATH9K_CIPHER_TKIP
;
784 hk
.kv_type
= ATH9K_CIPHER_AES_CCM
;
790 hk
.kv_len
= key
->keylen
;
791 memcpy(hk
.kv_val
, key
->key
, key
->keylen
);
793 if (!(key
->flags
& IEEE80211_KEY_FLAG_PAIRWISE
)) {
794 /* For now, use the default keys for broadcast keys. This may
795 * need to change with virtual interfaces. */
797 } else if (key
->keyidx
) {
798 struct ieee80211_vif
*vif
;
805 if (vif
->type
!= NL80211_IFTYPE_AP
) {
806 /* Only keyidx 0 should be used with unicast key, but
807 * allow this for client mode for now. */
816 if (key
->alg
== ALG_TKIP
)
817 idx
= ath_reserve_key_cache_slot_tkip(sc
);
819 idx
= ath_reserve_key_cache_slot(sc
);
821 return -ENOSPC
; /* no free key cache entries */
824 if (key
->alg
== ALG_TKIP
)
825 ret
= ath_setkey_tkip(sc
, idx
, key
->key
, &hk
, mac
);
827 ret
= ath_keyset(sc
, idx
, &hk
, mac
);
832 set_bit(idx
, sc
->keymap
);
833 if (key
->alg
== ALG_TKIP
) {
834 set_bit(idx
+ 64, sc
->keymap
);
836 set_bit(idx
+ 32, sc
->keymap
);
837 set_bit(idx
+ 64 + 32, sc
->keymap
);
844 static void ath_key_delete(struct ath_softc
*sc
, struct ieee80211_key_conf
*key
)
846 ath9k_hw_keyreset(sc
->sc_ah
, key
->hw_key_idx
);
847 if (key
->hw_key_idx
< IEEE80211_WEP_NKID
)
850 clear_bit(key
->hw_key_idx
, sc
->keymap
);
851 if (key
->alg
!= ALG_TKIP
)
854 clear_bit(key
->hw_key_idx
+ 64, sc
->keymap
);
856 clear_bit(key
->hw_key_idx
+ 32, sc
->keymap
);
857 clear_bit(key
->hw_key_idx
+ 64 + 32, sc
->keymap
);
861 static void setup_ht_cap(struct ath_softc
*sc
,
862 struct ieee80211_sta_ht_cap
*ht_info
)
864 #define ATH9K_HT_CAP_MAXRXAMPDU_65536 0x3 /* 2 ^ 16 */
865 #define ATH9K_HT_CAP_MPDUDENSITY_8 0x6 /* 8 usec */
867 ht_info
->ht_supported
= true;
868 ht_info
->cap
= IEEE80211_HT_CAP_SUP_WIDTH_20_40
|
869 IEEE80211_HT_CAP_SM_PS
|
870 IEEE80211_HT_CAP_SGI_40
|
871 IEEE80211_HT_CAP_DSSSCCK40
;
873 ht_info
->ampdu_factor
= ATH9K_HT_CAP_MAXRXAMPDU_65536
;
874 ht_info
->ampdu_density
= ATH9K_HT_CAP_MPDUDENSITY_8
;
876 /* set up supported mcs set */
877 memset(&ht_info
->mcs
, 0, sizeof(ht_info
->mcs
));
879 switch(sc
->rx_chainmask
) {
881 ht_info
->mcs
.rx_mask
[0] = 0xff;
887 ht_info
->mcs
.rx_mask
[0] = 0xff;
888 ht_info
->mcs
.rx_mask
[1] = 0xff;
892 ht_info
->mcs
.tx_params
= IEEE80211_HT_MCS_TX_DEFINED
;
895 static void ath9k_bss_assoc_info(struct ath_softc
*sc
,
896 struct ieee80211_vif
*vif
,
897 struct ieee80211_bss_conf
*bss_conf
)
899 struct ath_vif
*avp
= (void *)vif
->drv_priv
;
901 if (bss_conf
->assoc
) {
902 DPRINTF(sc
, ATH_DBG_CONFIG
, "Bss Info ASSOC %d, bssid: %pM\n",
903 bss_conf
->aid
, sc
->curbssid
);
905 /* New association, store aid */
906 if (avp
->av_opmode
== NL80211_IFTYPE_STATION
) {
907 sc
->curaid
= bss_conf
->aid
;
908 ath9k_hw_write_associd(sc
->sc_ah
, sc
->curbssid
,
912 /* Configure the beacon */
913 ath_beacon_config(sc
, 0);
914 sc
->sc_flags
|= SC_OP_BEACONS
;
916 /* Reset rssi stats */
917 sc
->nodestats
.ns_avgbrssi
= ATH_RSSI_DUMMY_MARKER
;
918 sc
->nodestats
.ns_avgrssi
= ATH_RSSI_DUMMY_MARKER
;
919 sc
->nodestats
.ns_avgtxrssi
= ATH_RSSI_DUMMY_MARKER
;
920 sc
->nodestats
.ns_avgtxrate
= ATH_RATE_DUMMY_MARKER
;
923 mod_timer(&sc
->ani
.timer
,
924 jiffies
+ msecs_to_jiffies(ATH_ANI_POLLINTERVAL
));
927 DPRINTF(sc
, ATH_DBG_CONFIG
, "Bss Info DISSOC\n");
932 /********************************/
934 /********************************/
936 static void ath_led_blink_work(struct work_struct
*work
)
938 struct ath_softc
*sc
= container_of(work
, struct ath_softc
,
939 ath_led_blink_work
.work
);
941 if (!(sc
->sc_flags
& SC_OP_LED_ASSOCIATED
))
943 ath9k_hw_set_gpio(sc
->sc_ah
, ATH_LED_PIN
,
944 (sc
->sc_flags
& SC_OP_LED_ON
) ? 1 : 0);
946 queue_delayed_work(sc
->hw
->workqueue
, &sc
->ath_led_blink_work
,
947 (sc
->sc_flags
& SC_OP_LED_ON
) ?
948 msecs_to_jiffies(sc
->led_off_duration
) :
949 msecs_to_jiffies(sc
->led_on_duration
));
951 sc
->led_on_duration
=
952 max((ATH_LED_ON_DURATION_IDLE
- sc
->led_on_cnt
), 25);
953 sc
->led_off_duration
=
954 max((ATH_LED_OFF_DURATION_IDLE
- sc
->led_off_cnt
), 10);
955 sc
->led_on_cnt
= sc
->led_off_cnt
= 0;
956 if (sc
->sc_flags
& SC_OP_LED_ON
)
957 sc
->sc_flags
&= ~SC_OP_LED_ON
;
959 sc
->sc_flags
|= SC_OP_LED_ON
;
962 static void ath_led_brightness(struct led_classdev
*led_cdev
,
963 enum led_brightness brightness
)
965 struct ath_led
*led
= container_of(led_cdev
, struct ath_led
, led_cdev
);
966 struct ath_softc
*sc
= led
->sc
;
968 switch (brightness
) {
970 if (led
->led_type
== ATH_LED_ASSOC
||
971 led
->led_type
== ATH_LED_RADIO
) {
972 ath9k_hw_set_gpio(sc
->sc_ah
, ATH_LED_PIN
,
973 (led
->led_type
== ATH_LED_RADIO
));
974 sc
->sc_flags
&= ~SC_OP_LED_ASSOCIATED
;
975 if (led
->led_type
== ATH_LED_RADIO
)
976 sc
->sc_flags
&= ~SC_OP_LED_ON
;
982 if (led
->led_type
== ATH_LED_ASSOC
) {
983 sc
->sc_flags
|= SC_OP_LED_ASSOCIATED
;
984 queue_delayed_work(sc
->hw
->workqueue
,
985 &sc
->ath_led_blink_work
, 0);
986 } else if (led
->led_type
== ATH_LED_RADIO
) {
987 ath9k_hw_set_gpio(sc
->sc_ah
, ATH_LED_PIN
, 0);
988 sc
->sc_flags
|= SC_OP_LED_ON
;
998 static int ath_register_led(struct ath_softc
*sc
, struct ath_led
*led
,
1004 led
->led_cdev
.name
= led
->name
;
1005 led
->led_cdev
.default_trigger
= trigger
;
1006 led
->led_cdev
.brightness_set
= ath_led_brightness
;
1008 ret
= led_classdev_register(wiphy_dev(sc
->hw
->wiphy
), &led
->led_cdev
);
1010 DPRINTF(sc
, ATH_DBG_FATAL
,
1011 "Failed to register led:%s", led
->name
);
1013 led
->registered
= 1;
1017 static void ath_unregister_led(struct ath_led
*led
)
1019 if (led
->registered
) {
1020 led_classdev_unregister(&led
->led_cdev
);
1021 led
->registered
= 0;
1025 static void ath_deinit_leds(struct ath_softc
*sc
)
1027 cancel_delayed_work_sync(&sc
->ath_led_blink_work
);
1028 ath_unregister_led(&sc
->assoc_led
);
1029 sc
->sc_flags
&= ~SC_OP_LED_ASSOCIATED
;
1030 ath_unregister_led(&sc
->tx_led
);
1031 ath_unregister_led(&sc
->rx_led
);
1032 ath_unregister_led(&sc
->radio_led
);
1033 ath9k_hw_set_gpio(sc
->sc_ah
, ATH_LED_PIN
, 1);
1036 static void ath_init_leds(struct ath_softc
*sc
)
1041 /* Configure gpio 1 for output */
1042 ath9k_hw_cfg_output(sc
->sc_ah
, ATH_LED_PIN
,
1043 AR_GPIO_OUTPUT_MUX_AS_OUTPUT
);
1044 /* LED off, active low */
1045 ath9k_hw_set_gpio(sc
->sc_ah
, ATH_LED_PIN
, 1);
1047 INIT_DELAYED_WORK(&sc
->ath_led_blink_work
, ath_led_blink_work
);
1049 trigger
= ieee80211_get_radio_led_name(sc
->hw
);
1050 snprintf(sc
->radio_led
.name
, sizeof(sc
->radio_led
.name
),
1051 "ath9k-%s::radio", wiphy_name(sc
->hw
->wiphy
));
1052 ret
= ath_register_led(sc
, &sc
->radio_led
, trigger
);
1053 sc
->radio_led
.led_type
= ATH_LED_RADIO
;
1057 trigger
= ieee80211_get_assoc_led_name(sc
->hw
);
1058 snprintf(sc
->assoc_led
.name
, sizeof(sc
->assoc_led
.name
),
1059 "ath9k-%s::assoc", wiphy_name(sc
->hw
->wiphy
));
1060 ret
= ath_register_led(sc
, &sc
->assoc_led
, trigger
);
1061 sc
->assoc_led
.led_type
= ATH_LED_ASSOC
;
1065 trigger
= ieee80211_get_tx_led_name(sc
->hw
);
1066 snprintf(sc
->tx_led
.name
, sizeof(sc
->tx_led
.name
),
1067 "ath9k-%s::tx", wiphy_name(sc
->hw
->wiphy
));
1068 ret
= ath_register_led(sc
, &sc
->tx_led
, trigger
);
1069 sc
->tx_led
.led_type
= ATH_LED_TX
;
1073 trigger
= ieee80211_get_rx_led_name(sc
->hw
);
1074 snprintf(sc
->rx_led
.name
, sizeof(sc
->rx_led
.name
),
1075 "ath9k-%s::rx", wiphy_name(sc
->hw
->wiphy
));
1076 ret
= ath_register_led(sc
, &sc
->rx_led
, trigger
);
1077 sc
->rx_led
.led_type
= ATH_LED_RX
;
1084 ath_deinit_leds(sc
);
1087 #if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
1089 /*******************/
1091 /*******************/
1093 static void ath_radio_enable(struct ath_softc
*sc
)
1095 struct ath_hal
*ah
= sc
->sc_ah
;
1096 struct ieee80211_channel
*channel
= sc
->hw
->conf
.channel
;
1099 ath9k_ps_wakeup(sc
);
1100 spin_lock_bh(&sc
->sc_resetlock
);
1102 r
= ath9k_hw_reset(ah
, ah
->ah_curchan
, false);
1105 DPRINTF(sc
, ATH_DBG_FATAL
,
1106 "Unable to reset channel %u (%uMhz) ",
1107 "reset status %u\n",
1108 channel
->center_freq
, r
);
1110 spin_unlock_bh(&sc
->sc_resetlock
);
1112 ath_update_txpow(sc
);
1113 if (ath_startrecv(sc
) != 0) {
1114 DPRINTF(sc
, ATH_DBG_FATAL
,
1115 "Unable to restart recv logic\n");
1119 if (sc
->sc_flags
& SC_OP_BEACONS
)
1120 ath_beacon_config(sc
, ATH_IF_ID_ANY
); /* restart beacons */
1122 /* Re-Enable interrupts */
1123 ath9k_hw_set_interrupts(ah
, sc
->imask
);
1126 ath9k_hw_cfg_output(ah
, ATH_LED_PIN
,
1127 AR_GPIO_OUTPUT_MUX_AS_OUTPUT
);
1128 ath9k_hw_set_gpio(ah
, ATH_LED_PIN
, 0);
1130 ieee80211_wake_queues(sc
->hw
);
1131 ath9k_ps_restore(sc
);
1134 static void ath_radio_disable(struct ath_softc
*sc
)
1136 struct ath_hal
*ah
= sc
->sc_ah
;
1137 struct ieee80211_channel
*channel
= sc
->hw
->conf
.channel
;
1140 ath9k_ps_wakeup(sc
);
1141 ieee80211_stop_queues(sc
->hw
);
1144 ath9k_hw_set_gpio(ah
, ATH_LED_PIN
, 1);
1145 ath9k_hw_cfg_gpio_input(ah
, ATH_LED_PIN
);
1147 /* Disable interrupts */
1148 ath9k_hw_set_interrupts(ah
, 0);
1150 ath_drain_all_txq(sc
, false); /* clear pending tx frames */
1151 ath_stoprecv(sc
); /* turn off frame recv */
1152 ath_flushrecv(sc
); /* flush recv queue */
1154 spin_lock_bh(&sc
->sc_resetlock
);
1155 r
= ath9k_hw_reset(ah
, ah
->ah_curchan
, false);
1157 DPRINTF(sc
, ATH_DBG_FATAL
,
1158 "Unable to reset channel %u (%uMhz) "
1159 "reset status %u\n",
1160 channel
->center_freq
, r
);
1162 spin_unlock_bh(&sc
->sc_resetlock
);
1164 ath9k_hw_phy_disable(ah
);
1165 ath9k_hw_setpower(ah
, ATH9K_PM_FULL_SLEEP
);
1166 ath9k_ps_restore(sc
);
1169 static bool ath_is_rfkill_set(struct ath_softc
*sc
)
1171 struct ath_hal
*ah
= sc
->sc_ah
;
1173 return ath9k_hw_gpio_get(ah
, ah
->ah_rfkill_gpio
) ==
1174 ah
->ah_rfkill_polarity
;
1177 /* h/w rfkill poll function */
1178 static void ath_rfkill_poll(struct work_struct
*work
)
1180 struct ath_softc
*sc
= container_of(work
, struct ath_softc
,
1181 rf_kill
.rfkill_poll
.work
);
1184 if (sc
->sc_flags
& SC_OP_INVALID
)
1187 radio_on
= !ath_is_rfkill_set(sc
);
1190 * enable/disable radio only when there is a
1191 * state change in RF switch
1193 if (radio_on
== !!(sc
->sc_flags
& SC_OP_RFKILL_HW_BLOCKED
)) {
1194 enum rfkill_state state
;
1196 if (sc
->sc_flags
& SC_OP_RFKILL_SW_BLOCKED
) {
1197 state
= radio_on
? RFKILL_STATE_SOFT_BLOCKED
1198 : RFKILL_STATE_HARD_BLOCKED
;
1199 } else if (radio_on
) {
1200 ath_radio_enable(sc
);
1201 state
= RFKILL_STATE_UNBLOCKED
;
1203 ath_radio_disable(sc
);
1204 state
= RFKILL_STATE_HARD_BLOCKED
;
1207 if (state
== RFKILL_STATE_HARD_BLOCKED
)
1208 sc
->sc_flags
|= SC_OP_RFKILL_HW_BLOCKED
;
1210 sc
->sc_flags
&= ~SC_OP_RFKILL_HW_BLOCKED
;
1212 rfkill_force_state(sc
->rf_kill
.rfkill
, state
);
1215 queue_delayed_work(sc
->hw
->workqueue
, &sc
->rf_kill
.rfkill_poll
,
1216 msecs_to_jiffies(ATH_RFKILL_POLL_INTERVAL
));
1219 /* s/w rfkill handler */
1220 static int ath_sw_toggle_radio(void *data
, enum rfkill_state state
)
1222 struct ath_softc
*sc
= data
;
1225 case RFKILL_STATE_SOFT_BLOCKED
:
1226 if (!(sc
->sc_flags
& (SC_OP_RFKILL_HW_BLOCKED
|
1227 SC_OP_RFKILL_SW_BLOCKED
)))
1228 ath_radio_disable(sc
);
1229 sc
->sc_flags
|= SC_OP_RFKILL_SW_BLOCKED
;
1231 case RFKILL_STATE_UNBLOCKED
:
1232 if ((sc
->sc_flags
& SC_OP_RFKILL_SW_BLOCKED
)) {
1233 sc
->sc_flags
&= ~SC_OP_RFKILL_SW_BLOCKED
;
1234 if (sc
->sc_flags
& SC_OP_RFKILL_HW_BLOCKED
) {
1235 DPRINTF(sc
, ATH_DBG_FATAL
, "Can't turn on the"
1236 "radio as it is disabled by h/w\n");
1239 ath_radio_enable(sc
);
1247 /* Init s/w rfkill */
1248 static int ath_init_sw_rfkill(struct ath_softc
*sc
)
1250 sc
->rf_kill
.rfkill
= rfkill_allocate(wiphy_dev(sc
->hw
->wiphy
),
1252 if (!sc
->rf_kill
.rfkill
) {
1253 DPRINTF(sc
, ATH_DBG_FATAL
, "Failed to allocate rfkill\n");
1257 snprintf(sc
->rf_kill
.rfkill_name
, sizeof(sc
->rf_kill
.rfkill_name
),
1258 "ath9k-%s::rfkill", wiphy_name(sc
->hw
->wiphy
));
1259 sc
->rf_kill
.rfkill
->name
= sc
->rf_kill
.rfkill_name
;
1260 sc
->rf_kill
.rfkill
->data
= sc
;
1261 sc
->rf_kill
.rfkill
->toggle_radio
= ath_sw_toggle_radio
;
1262 sc
->rf_kill
.rfkill
->state
= RFKILL_STATE_UNBLOCKED
;
1263 sc
->rf_kill
.rfkill
->user_claim_unsupported
= 1;
1268 /* Deinitialize rfkill */
1269 static void ath_deinit_rfkill(struct ath_softc
*sc
)
1271 if (sc
->sc_ah
->ah_caps
.hw_caps
& ATH9K_HW_CAP_RFSILENT
)
1272 cancel_delayed_work_sync(&sc
->rf_kill
.rfkill_poll
);
1274 if (sc
->sc_flags
& SC_OP_RFKILL_REGISTERED
) {
1275 rfkill_unregister(sc
->rf_kill
.rfkill
);
1276 sc
->sc_flags
&= ~SC_OP_RFKILL_REGISTERED
;
1277 sc
->rf_kill
.rfkill
= NULL
;
1281 static int ath_start_rfkill_poll(struct ath_softc
*sc
)
1283 if (sc
->sc_ah
->ah_caps
.hw_caps
& ATH9K_HW_CAP_RFSILENT
)
1284 queue_delayed_work(sc
->hw
->workqueue
,
1285 &sc
->rf_kill
.rfkill_poll
, 0);
1287 if (!(sc
->sc_flags
& SC_OP_RFKILL_REGISTERED
)) {
1288 if (rfkill_register(sc
->rf_kill
.rfkill
)) {
1289 DPRINTF(sc
, ATH_DBG_FATAL
,
1290 "Unable to register rfkill\n");
1291 rfkill_free(sc
->rf_kill
.rfkill
);
1293 /* Deinitialize the device */
1297 sc
->sc_flags
|= SC_OP_RFKILL_REGISTERED
;
1303 #endif /* CONFIG_RFKILL */
1305 void ath_cleanup(struct ath_softc
*sc
)
1308 free_irq(sc
->irq
, sc
);
1309 ath_bus_cleanup(sc
);
1310 ieee80211_free_hw(sc
->hw
);
1313 void ath_detach(struct ath_softc
*sc
)
1315 struct ieee80211_hw
*hw
= sc
->hw
;
1318 ath9k_ps_wakeup(sc
);
1320 DPRINTF(sc
, ATH_DBG_CONFIG
, "Detach ATH hw\n");
1322 #if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
1323 ath_deinit_rfkill(sc
);
1325 ath_deinit_leds(sc
);
1327 ieee80211_unregister_hw(hw
);
1331 tasklet_kill(&sc
->intr_tq
);
1332 tasklet_kill(&sc
->bcon_tasklet
);
1334 if (!(sc
->sc_flags
& SC_OP_INVALID
))
1335 ath9k_hw_setpower(sc
->sc_ah
, ATH9K_PM_AWAKE
);
1337 /* cleanup tx queues */
1338 for (i
= 0; i
< ATH9K_NUM_TX_QUEUES
; i
++)
1339 if (ATH_TXQ_SETUP(sc
, i
))
1340 ath_tx_cleanupq(sc
, &sc
->tx
.txq
[i
]);
1342 ath9k_hw_detach(sc
->sc_ah
);
1343 ath9k_exit_debug(sc
);
1344 ath9k_ps_restore(sc
);
1347 static int ath_init(u16 devid
, struct ath_softc
*sc
)
1349 struct ath_hal
*ah
= NULL
;
1354 /* XXX: hardware will not be ready until ath_open() being called */
1355 sc
->sc_flags
|= SC_OP_INVALID
;
1357 if (ath9k_init_debug(sc
) < 0)
1358 printk(KERN_ERR
"Unable to create debugfs files\n");
1360 spin_lock_init(&sc
->sc_resetlock
);
1361 mutex_init(&sc
->mutex
);
1362 tasklet_init(&sc
->intr_tq
, ath9k_tasklet
, (unsigned long)sc
);
1363 tasklet_init(&sc
->bcon_tasklet
, ath9k_beacon_tasklet
,
1367 * Cache line size is used to size and align various
1368 * structures used to communicate with the hardware.
1370 ath_read_cachesize(sc
, &csz
);
1371 /* XXX assert csz is non-zero */
1372 sc
->cachelsz
= csz
<< 2; /* convert to bytes */
1374 ah
= ath9k_hw_attach(devid
, sc
, sc
->mem
, &status
);
1376 DPRINTF(sc
, ATH_DBG_FATAL
,
1377 "Unable to attach hardware; HAL status %d\n", status
);
1383 /* Get the hardware key cache size. */
1384 sc
->keymax
= ah
->ah_caps
.keycache_size
;
1385 if (sc
->keymax
> ATH_KEYMAX
) {
1386 DPRINTF(sc
, ATH_DBG_KEYCACHE
,
1387 "Warning, using only %u entries in %u key cache\n",
1388 ATH_KEYMAX
, sc
->keymax
);
1389 sc
->keymax
= ATH_KEYMAX
;
1393 * Reset the key cache since some parts do not
1394 * reset the contents on initial power up.
1396 for (i
= 0; i
< sc
->keymax
; i
++)
1397 ath9k_hw_keyreset(ah
, (u16
) i
);
1399 if (ath9k_regd_init(sc
->sc_ah
))
1402 /* default to MONITOR mode */
1403 sc
->sc_ah
->ah_opmode
= NL80211_IFTYPE_MONITOR
;
1405 /* Setup rate tables */
1407 ath_rate_attach(sc
);
1408 ath_setup_rates(sc
, IEEE80211_BAND_2GHZ
);
1409 ath_setup_rates(sc
, IEEE80211_BAND_5GHZ
);
1412 * Allocate hardware transmit queues: one queue for
1413 * beacon frames and one data queue for each QoS
1414 * priority. Note that the hal handles reseting
1415 * these queues at the needed time.
1417 sc
->beacon
.beaconq
= ath_beaconq_setup(ah
);
1418 if (sc
->beacon
.beaconq
== -1) {
1419 DPRINTF(sc
, ATH_DBG_FATAL
,
1420 "Unable to setup a beacon xmit queue\n");
1424 sc
->beacon
.cabq
= ath_txq_setup(sc
, ATH9K_TX_QUEUE_CAB
, 0);
1425 if (sc
->beacon
.cabq
== NULL
) {
1426 DPRINTF(sc
, ATH_DBG_FATAL
,
1427 "Unable to setup CAB xmit queue\n");
1432 sc
->config
.cabqReadytime
= ATH_CABQ_READY_TIME
;
1433 ath_cabq_update(sc
);
1435 for (i
= 0; i
< ARRAY_SIZE(sc
->tx
.hwq_map
); i
++)
1436 sc
->tx
.hwq_map
[i
] = -1;
1438 /* Setup data queues */
1439 /* NB: ensure BK queue is the lowest priority h/w queue */
1440 if (!ath_tx_setup(sc
, ATH9K_WME_AC_BK
)) {
1441 DPRINTF(sc
, ATH_DBG_FATAL
,
1442 "Unable to setup xmit queue for BK traffic\n");
1447 if (!ath_tx_setup(sc
, ATH9K_WME_AC_BE
)) {
1448 DPRINTF(sc
, ATH_DBG_FATAL
,
1449 "Unable to setup xmit queue for BE traffic\n");
1453 if (!ath_tx_setup(sc
, ATH9K_WME_AC_VI
)) {
1454 DPRINTF(sc
, ATH_DBG_FATAL
,
1455 "Unable to setup xmit queue for VI traffic\n");
1459 if (!ath_tx_setup(sc
, ATH9K_WME_AC_VO
)) {
1460 DPRINTF(sc
, ATH_DBG_FATAL
,
1461 "Unable to setup xmit queue for VO traffic\n");
1466 /* Initializes the noise floor to a reasonable default value.
1467 * Later on this will be updated during ANI processing. */
1469 sc
->ani
.noise_floor
= ATH_DEFAULT_NOISE_FLOOR
;
1470 setup_timer(&sc
->ani
.timer
, ath_ani_calibrate
, (unsigned long)sc
);
1472 if (ath9k_hw_getcapability(ah
, ATH9K_CAP_CIPHER
,
1473 ATH9K_CIPHER_TKIP
, NULL
)) {
1475 * Whether we should enable h/w TKIP MIC.
1476 * XXX: if we don't support WME TKIP MIC, then we wouldn't
1477 * report WMM capable, so it's always safe to turn on
1478 * TKIP MIC in this case.
1480 ath9k_hw_setcapability(sc
->sc_ah
, ATH9K_CAP_TKIP_MIC
,
1485 * Check whether the separate key cache entries
1486 * are required to handle both tx+rx MIC keys.
1487 * With split mic keys the number of stations is limited
1488 * to 27 otherwise 59.
1490 if (ath9k_hw_getcapability(ah
, ATH9K_CAP_CIPHER
,
1491 ATH9K_CIPHER_TKIP
, NULL
)
1492 && ath9k_hw_getcapability(ah
, ATH9K_CAP_CIPHER
,
1493 ATH9K_CIPHER_MIC
, NULL
)
1494 && ath9k_hw_getcapability(ah
, ATH9K_CAP_TKIP_SPLIT
,
1498 /* turn on mcast key search if possible */
1499 if (!ath9k_hw_getcapability(ah
, ATH9K_CAP_MCAST_KEYSRCH
, 0, NULL
))
1500 (void)ath9k_hw_setcapability(ah
, ATH9K_CAP_MCAST_KEYSRCH
, 1,
1503 sc
->config
.txpowlimit
= ATH_TXPOWER_MAX
;
1505 /* 11n Capabilities */
1506 if (ah
->ah_caps
.hw_caps
& ATH9K_HW_CAP_HT
) {
1507 sc
->sc_flags
|= SC_OP_TXAGGR
;
1508 sc
->sc_flags
|= SC_OP_RXAGGR
;
1511 sc
->tx_chainmask
= ah
->ah_caps
.tx_chainmask
;
1512 sc
->rx_chainmask
= ah
->ah_caps
.rx_chainmask
;
1514 ath9k_hw_setcapability(ah
, ATH9K_CAP_DIVERSITY
, 1, true, NULL
);
1515 sc
->rx
.defant
= ath9k_hw_getdefantenna(ah
);
1517 ath9k_hw_getmac(ah
, sc
->macaddr
);
1518 if (ah
->ah_caps
.hw_caps
& ATH9K_HW_CAP_BSSIDMASK
) {
1519 ath9k_hw_getbssidmask(ah
, sc
->bssidmask
);
1520 ATH_SET_VIF_BSSID_MASK(sc
->bssidmask
);
1521 ath9k_hw_setbssidmask(ah
, sc
->bssidmask
);
1524 sc
->beacon
.slottime
= ATH9K_SLOT_TIME_9
; /* default to short slot time */
1526 /* initialize beacon slots */
1527 for (i
= 0; i
< ARRAY_SIZE(sc
->beacon
.bslot
); i
++)
1528 sc
->beacon
.bslot
[i
] = ATH_IF_ID_ANY
;
1530 /* save MISC configurations */
1531 sc
->config
.swBeaconProcess
= 1;
1533 /* setup channels and rates */
1535 sc
->sbands
[IEEE80211_BAND_2GHZ
].channels
= ath9k_2ghz_chantable
;
1536 sc
->sbands
[IEEE80211_BAND_2GHZ
].bitrates
=
1537 sc
->rates
[IEEE80211_BAND_2GHZ
];
1538 sc
->sbands
[IEEE80211_BAND_2GHZ
].band
= IEEE80211_BAND_2GHZ
;
1539 sc
->sbands
[IEEE80211_BAND_2GHZ
].n_channels
=
1540 ARRAY_SIZE(ath9k_2ghz_chantable
);
1542 if (test_bit(ATH9K_MODE_11A
, sc
->sc_ah
->ah_caps
.wireless_modes
)) {
1543 sc
->sbands
[IEEE80211_BAND_5GHZ
].channels
= ath9k_5ghz_chantable
;
1544 sc
->sbands
[IEEE80211_BAND_5GHZ
].bitrates
=
1545 sc
->rates
[IEEE80211_BAND_5GHZ
];
1546 sc
->sbands
[IEEE80211_BAND_5GHZ
].band
= IEEE80211_BAND_5GHZ
;
1547 sc
->sbands
[IEEE80211_BAND_5GHZ
].n_channels
=
1548 ARRAY_SIZE(ath9k_5ghz_chantable
);
1551 if (sc
->sc_ah
->ah_caps
.hw_caps
& ATH9K_HW_CAP_BT_COEX
)
1552 ath9k_hw_btcoex_enable(sc
->sc_ah
);
1556 /* cleanup tx queues */
1557 for (i
= 0; i
< ATH9K_NUM_TX_QUEUES
; i
++)
1558 if (ATH_TXQ_SETUP(sc
, i
))
1559 ath_tx_cleanupq(sc
, &sc
->tx
.txq
[i
]);
1562 ath9k_hw_detach(ah
);
1567 int ath_attach(u16 devid
, struct ath_softc
*sc
)
1569 struct ieee80211_hw
*hw
= sc
->hw
;
1572 DPRINTF(sc
, ATH_DBG_CONFIG
, "Attach ATH hw\n");
1574 error
= ath_init(devid
, sc
);
1578 /* get mac address from hardware and set in mac80211 */
1580 SET_IEEE80211_PERM_ADDR(hw
, sc
->macaddr
);
1582 hw
->flags
= IEEE80211_HW_RX_INCLUDES_FCS
|
1583 IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING
|
1584 IEEE80211_HW_SIGNAL_DBM
|
1585 IEEE80211_HW_AMPDU_AGGREGATION
|
1586 IEEE80211_HW_SUPPORTS_PS
|
1587 IEEE80211_HW_PS_NULLFUNC_STACK
;
1589 if (AR_SREV_9160_10_OR_LATER(sc
->sc_ah
))
1590 hw
->flags
|= IEEE80211_HW_MFP_CAPABLE
;
1592 hw
->wiphy
->interface_modes
=
1593 BIT(NL80211_IFTYPE_AP
) |
1594 BIT(NL80211_IFTYPE_STATION
) |
1595 BIT(NL80211_IFTYPE_ADHOC
);
1597 hw
->wiphy
->reg_notifier
= ath9k_reg_notifier
;
1598 hw
->wiphy
->strict_regulatory
= true;
1602 hw
->max_rate_tries
= ATH_11N_TXMAXTRY
;
1603 hw
->sta_data_size
= sizeof(struct ath_node
);
1604 hw
->vif_data_size
= sizeof(struct ath_vif
);
1606 hw
->rate_control_algorithm
= "ath9k_rate_control";
1608 if (sc
->sc_ah
->ah_caps
.hw_caps
& ATH9K_HW_CAP_HT
) {
1609 setup_ht_cap(sc
, &sc
->sbands
[IEEE80211_BAND_2GHZ
].ht_cap
);
1610 if (test_bit(ATH9K_MODE_11A
, sc
->sc_ah
->ah_caps
.wireless_modes
))
1611 setup_ht_cap(sc
, &sc
->sbands
[IEEE80211_BAND_5GHZ
].ht_cap
);
1614 hw
->wiphy
->bands
[IEEE80211_BAND_2GHZ
] = &sc
->sbands
[IEEE80211_BAND_2GHZ
];
1615 if (test_bit(ATH9K_MODE_11A
, sc
->sc_ah
->ah_caps
.wireless_modes
))
1616 hw
->wiphy
->bands
[IEEE80211_BAND_5GHZ
] =
1617 &sc
->sbands
[IEEE80211_BAND_5GHZ
];
1619 /* initialize tx/rx engine */
1620 error
= ath_tx_init(sc
, ATH_TXBUF
);
1624 error
= ath_rx_init(sc
, ATH_RXBUF
);
1628 #if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
1629 /* Initialze h/w Rfkill */
1630 if (sc
->sc_ah
->ah_caps
.hw_caps
& ATH9K_HW_CAP_RFSILENT
)
1631 INIT_DELAYED_WORK(&sc
->rf_kill
.rfkill_poll
, ath_rfkill_poll
);
1633 /* Initialize s/w rfkill */
1634 if (ath_init_sw_rfkill(sc
))
1638 if (ath9k_is_world_regd(sc
->sc_ah
)) {
1639 /* Anything applied here (prior to wiphy registratoin) gets
1640 * saved on the wiphy orig_* parameters */
1641 const struct ieee80211_regdomain
*regd
=
1642 ath9k_world_regdomain(sc
->sc_ah
);
1643 hw
->wiphy
->custom_regulatory
= true;
1644 hw
->wiphy
->strict_regulatory
= false;
1645 wiphy_apply_custom_regulatory(sc
->hw
->wiphy
, regd
);
1646 ath9k_reg_apply_radar_flags(hw
->wiphy
);
1647 ath9k_reg_apply_world_flags(hw
->wiphy
, REGDOM_SET_BY_INIT
);
1649 /* This gets applied in the case of the absense of CRDA,
1650 * its our own custom world regulatory domain, similar to
1651 * cfg80211's but we enable passive scanning */
1652 const struct ieee80211_regdomain
*regd
=
1653 ath9k_default_world_regdomain();
1654 wiphy_apply_custom_regulatory(sc
->hw
->wiphy
, regd
);
1655 ath9k_reg_apply_radar_flags(hw
->wiphy
);
1656 ath9k_reg_apply_world_flags(hw
->wiphy
, REGDOM_SET_BY_INIT
);
1659 error
= ieee80211_register_hw(hw
);
1661 if (!ath9k_is_world_regd(sc
->sc_ah
))
1662 regulatory_hint(hw
->wiphy
, sc
->sc_ah
->alpha2
);
1664 /* Initialize LED control */
1674 int ath_reset(struct ath_softc
*sc
, bool retry_tx
)
1676 struct ath_hal
*ah
= sc
->sc_ah
;
1677 struct ieee80211_hw
*hw
= sc
->hw
;
1680 ath9k_hw_set_interrupts(ah
, 0);
1681 ath_drain_all_txq(sc
, retry_tx
);
1685 spin_lock_bh(&sc
->sc_resetlock
);
1686 r
= ath9k_hw_reset(ah
, sc
->sc_ah
->ah_curchan
, false);
1688 DPRINTF(sc
, ATH_DBG_FATAL
,
1689 "Unable to reset hardware; reset status %u\n", r
);
1690 spin_unlock_bh(&sc
->sc_resetlock
);
1692 if (ath_startrecv(sc
) != 0)
1693 DPRINTF(sc
, ATH_DBG_FATAL
, "Unable to start recv logic\n");
1696 * We may be doing a reset in response to a request
1697 * that changes the channel so update any state that
1698 * might change as a result.
1700 ath_cache_conf_rate(sc
, &hw
->conf
);
1702 ath_update_txpow(sc
);
1704 if (sc
->sc_flags
& SC_OP_BEACONS
)
1705 ath_beacon_config(sc
, ATH_IF_ID_ANY
); /* restart beacons */
1707 ath9k_hw_set_interrupts(ah
, sc
->imask
);
1711 for (i
= 0; i
< ATH9K_NUM_TX_QUEUES
; i
++) {
1712 if (ATH_TXQ_SETUP(sc
, i
)) {
1713 spin_lock_bh(&sc
->tx
.txq
[i
].axq_lock
);
1714 ath_txq_schedule(sc
, &sc
->tx
.txq
[i
]);
1715 spin_unlock_bh(&sc
->tx
.txq
[i
].axq_lock
);
1724 * This function will allocate both the DMA descriptor structure, and the
1725 * buffers it contains. These are used to contain the descriptors used
1728 int ath_descdma_setup(struct ath_softc
*sc
, struct ath_descdma
*dd
,
1729 struct list_head
*head
, const char *name
,
1730 int nbuf
, int ndesc
)
1732 #define DS2PHYS(_dd, _ds) \
1733 ((_dd)->dd_desc_paddr + ((caddr_t)(_ds) - (caddr_t)(_dd)->dd_desc))
1734 #define ATH_DESC_4KB_BOUND_CHECK(_daddr) ((((_daddr) & 0xFFF) > 0xF7F) ? 1 : 0)
1735 #define ATH_DESC_4KB_BOUND_NUM_SKIPPED(_len) ((_len) / 4096)
1737 struct ath_desc
*ds
;
1739 int i
, bsize
, error
;
1741 DPRINTF(sc
, ATH_DBG_CONFIG
, "%s DMA: %u buffers %u desc/buf\n",
1744 /* ath_desc must be a multiple of DWORDs */
1745 if ((sizeof(struct ath_desc
) % 4) != 0) {
1746 DPRINTF(sc
, ATH_DBG_FATAL
, "ath_desc not DWORD aligned\n");
1747 ASSERT((sizeof(struct ath_desc
) % 4) == 0);
1753 dd
->dd_desc_len
= sizeof(struct ath_desc
) * nbuf
* ndesc
;
1756 * Need additional DMA memory because we can't use
1757 * descriptors that cross the 4K page boundary. Assume
1758 * one skipped descriptor per 4K page.
1760 if (!(sc
->sc_ah
->ah_caps
.hw_caps
& ATH9K_HW_CAP_4KB_SPLITTRANS
)) {
1762 ATH_DESC_4KB_BOUND_NUM_SKIPPED(dd
->dd_desc_len
);
1765 while (ndesc_skipped
) {
1766 dma_len
= ndesc_skipped
* sizeof(struct ath_desc
);
1767 dd
->dd_desc_len
+= dma_len
;
1769 ndesc_skipped
= ATH_DESC_4KB_BOUND_NUM_SKIPPED(dma_len
);
1773 /* allocate descriptors */
1774 dd
->dd_desc
= dma_alloc_coherent(sc
->dev
, dd
->dd_desc_len
,
1775 &dd
->dd_desc_paddr
, GFP_ATOMIC
);
1776 if (dd
->dd_desc
== NULL
) {
1781 DPRINTF(sc
, ATH_DBG_CONFIG
, "%s DMA map: %p (%u) -> %llx (%u)\n",
1782 dd
->dd_name
, ds
, (u32
) dd
->dd_desc_len
,
1783 ito64(dd
->dd_desc_paddr
), /*XXX*/(u32
) dd
->dd_desc_len
);
1785 /* allocate buffers */
1786 bsize
= sizeof(struct ath_buf
) * nbuf
;
1787 bf
= kmalloc(bsize
, GFP_KERNEL
);
1792 memset(bf
, 0, bsize
);
1795 INIT_LIST_HEAD(head
);
1796 for (i
= 0; i
< nbuf
; i
++, bf
++, ds
+= ndesc
) {
1798 bf
->bf_daddr
= DS2PHYS(dd
, ds
);
1800 if (!(sc
->sc_ah
->ah_caps
.hw_caps
&
1801 ATH9K_HW_CAP_4KB_SPLITTRANS
)) {
1803 * Skip descriptor addresses which can cause 4KB
1804 * boundary crossing (addr + length) with a 32 dword
1807 while (ATH_DESC_4KB_BOUND_CHECK(bf
->bf_daddr
)) {
1808 ASSERT((caddr_t
) bf
->bf_desc
<
1809 ((caddr_t
) dd
->dd_desc
+
1814 bf
->bf_daddr
= DS2PHYS(dd
, ds
);
1817 list_add_tail(&bf
->list
, head
);
1821 dma_free_coherent(sc
->dev
, dd
->dd_desc_len
, dd
->dd_desc
,
1824 memset(dd
, 0, sizeof(*dd
));
1826 #undef ATH_DESC_4KB_BOUND_CHECK
1827 #undef ATH_DESC_4KB_BOUND_NUM_SKIPPED
1831 void ath_descdma_cleanup(struct ath_softc
*sc
,
1832 struct ath_descdma
*dd
,
1833 struct list_head
*head
)
1835 dma_free_coherent(sc
->dev
, dd
->dd_desc_len
, dd
->dd_desc
,
1838 INIT_LIST_HEAD(head
);
1839 kfree(dd
->dd_bufptr
);
1840 memset(dd
, 0, sizeof(*dd
));
1843 int ath_get_hal_qnum(u16 queue
, struct ath_softc
*sc
)
1849 qnum
= sc
->tx
.hwq_map
[ATH9K_WME_AC_VO
];
1852 qnum
= sc
->tx
.hwq_map
[ATH9K_WME_AC_VI
];
1855 qnum
= sc
->tx
.hwq_map
[ATH9K_WME_AC_BE
];
1858 qnum
= sc
->tx
.hwq_map
[ATH9K_WME_AC_BK
];
1861 qnum
= sc
->tx
.hwq_map
[ATH9K_WME_AC_BE
];
1868 int ath_get_mac80211_qnum(u32 queue
, struct ath_softc
*sc
)
1873 case ATH9K_WME_AC_VO
:
1876 case ATH9K_WME_AC_VI
:
1879 case ATH9K_WME_AC_BE
:
1882 case ATH9K_WME_AC_BK
:
1893 /* XXX: Remove me once we don't depend on ath9k_channel for all
1894 * this redundant data */
1895 static void ath9k_update_ichannel(struct ath_softc
*sc
,
1896 struct ath9k_channel
*ichan
)
1898 struct ieee80211_hw
*hw
= sc
->hw
;
1899 struct ieee80211_channel
*chan
= hw
->conf
.channel
;
1900 struct ieee80211_conf
*conf
= &hw
->conf
;
1902 ichan
->channel
= chan
->center_freq
;
1905 if (chan
->band
== IEEE80211_BAND_2GHZ
) {
1906 ichan
->chanmode
= CHANNEL_G
;
1907 ichan
->channelFlags
= CHANNEL_2GHZ
| CHANNEL_OFDM
;
1909 ichan
->chanmode
= CHANNEL_A
;
1910 ichan
->channelFlags
= CHANNEL_5GHZ
| CHANNEL_OFDM
;
1913 sc
->tx_chan_width
= ATH9K_HT_MACMODE_20
;
1915 if (conf_is_ht(conf
)) {
1916 if (conf_is_ht40(conf
))
1917 sc
->tx_chan_width
= ATH9K_HT_MACMODE_2040
;
1919 ichan
->chanmode
= ath_get_extchanmode(sc
, chan
,
1920 conf
->channel_type
);
1924 /**********************/
1925 /* mac80211 callbacks */
1926 /**********************/
1928 static int ath9k_start(struct ieee80211_hw
*hw
)
1930 struct ath_softc
*sc
= hw
->priv
;
1931 struct ieee80211_channel
*curchan
= hw
->conf
.channel
;
1932 struct ath9k_channel
*init_channel
;
1935 DPRINTF(sc
, ATH_DBG_CONFIG
, "Starting driver with "
1936 "initial channel: %d MHz\n", curchan
->center_freq
);
1938 mutex_lock(&sc
->mutex
);
1940 /* setup initial channel */
1942 pos
= curchan
->hw_value
;
1944 init_channel
= &sc
->sc_ah
->ah_channels
[pos
];
1945 ath9k_update_ichannel(sc
, init_channel
);
1947 /* Reset SERDES registers */
1948 ath9k_hw_configpcipowersave(sc
->sc_ah
, 0);
1951 * The basic interface to setting the hardware in a good
1952 * state is ``reset''. On return the hardware is known to
1953 * be powered up and with interrupts disabled. This must
1954 * be followed by initialization of the appropriate bits
1955 * and then setup of the interrupt mask.
1957 spin_lock_bh(&sc
->sc_resetlock
);
1958 r
= ath9k_hw_reset(sc
->sc_ah
, init_channel
, false);
1960 DPRINTF(sc
, ATH_DBG_FATAL
,
1961 "Unable to reset hardware; reset status %u "
1962 "(freq %u MHz)\n", r
,
1963 curchan
->center_freq
);
1964 spin_unlock_bh(&sc
->sc_resetlock
);
1967 spin_unlock_bh(&sc
->sc_resetlock
);
1970 * This is needed only to setup initial state
1971 * but it's best done after a reset.
1973 ath_update_txpow(sc
);
1976 * Setup the hardware after reset:
1977 * The receive engine is set going.
1978 * Frame transmit is handled entirely
1979 * in the frame output path; there's nothing to do
1980 * here except setup the interrupt mask.
1982 if (ath_startrecv(sc
) != 0) {
1983 DPRINTF(sc
, ATH_DBG_FATAL
,
1984 "Unable to start recv logic\n");
1989 /* Setup our intr mask. */
1990 sc
->imask
= ATH9K_INT_RX
| ATH9K_INT_TX
1991 | ATH9K_INT_RXEOL
| ATH9K_INT_RXORN
1992 | ATH9K_INT_FATAL
| ATH9K_INT_GLOBAL
;
1994 if (sc
->sc_ah
->ah_caps
.hw_caps
& ATH9K_HW_CAP_GTT
)
1995 sc
->imask
|= ATH9K_INT_GTT
;
1997 if (sc
->sc_ah
->ah_caps
.hw_caps
& ATH9K_HW_CAP_HT
)
1998 sc
->imask
|= ATH9K_INT_CST
;
2000 ath_cache_conf_rate(sc
, &hw
->conf
);
2002 sc
->sc_flags
&= ~SC_OP_INVALID
;
2004 /* Disable BMISS interrupt when we're not associated */
2005 sc
->imask
&= ~(ATH9K_INT_SWBA
| ATH9K_INT_BMISS
);
2006 ath9k_hw_set_interrupts(sc
->sc_ah
, sc
->imask
);
2008 ieee80211_wake_queues(sc
->hw
);
2010 #if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
2011 r
= ath_start_rfkill_poll(sc
);
2015 mutex_unlock(&sc
->mutex
);
2020 static int ath9k_tx(struct ieee80211_hw
*hw
,
2021 struct sk_buff
*skb
)
2023 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(skb
);
2024 struct ath_softc
*sc
= hw
->priv
;
2025 struct ath_tx_control txctl
;
2026 int hdrlen
, padsize
;
2028 memset(&txctl
, 0, sizeof(struct ath_tx_control
));
2031 * As a temporary workaround, assign seq# here; this will likely need
2032 * to be cleaned up to work better with Beacon transmission and virtual
2035 if (info
->flags
& IEEE80211_TX_CTL_ASSIGN_SEQ
) {
2036 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*) skb
->data
;
2037 if (info
->flags
& IEEE80211_TX_CTL_FIRST_FRAGMENT
)
2038 sc
->tx
.seq_no
+= 0x10;
2039 hdr
->seq_ctrl
&= cpu_to_le16(IEEE80211_SCTL_FRAG
);
2040 hdr
->seq_ctrl
|= cpu_to_le16(sc
->tx
.seq_no
);
2043 /* Add the padding after the header if this is not already done */
2044 hdrlen
= ieee80211_get_hdrlen_from_skb(skb
);
2046 padsize
= hdrlen
% 4;
2047 if (skb_headroom(skb
) < padsize
)
2049 skb_push(skb
, padsize
);
2050 memmove(skb
->data
, skb
->data
+ padsize
, hdrlen
);
2053 /* Check if a tx queue is available */
2055 txctl
.txq
= ath_test_get_txq(sc
, skb
);
2059 DPRINTF(sc
, ATH_DBG_XMIT
, "transmitting packet, skb: %p\n", skb
);
2061 if (ath_tx_start(sc
, skb
, &txctl
) != 0) {
2062 DPRINTF(sc
, ATH_DBG_XMIT
, "TX failed\n");
2068 dev_kfree_skb_any(skb
);
2072 static void ath9k_stop(struct ieee80211_hw
*hw
)
2074 struct ath_softc
*sc
= hw
->priv
;
2076 if (sc
->sc_flags
& SC_OP_INVALID
) {
2077 DPRINTF(sc
, ATH_DBG_ANY
, "Device not present\n");
2081 mutex_lock(&sc
->mutex
);
2083 ieee80211_stop_queues(sc
->hw
);
2085 /* make sure h/w will not generate any interrupt
2086 * before setting the invalid flag. */
2087 ath9k_hw_set_interrupts(sc
->sc_ah
, 0);
2089 if (!(sc
->sc_flags
& SC_OP_INVALID
)) {
2090 ath_drain_all_txq(sc
, false);
2092 ath9k_hw_phy_disable(sc
->sc_ah
);
2094 sc
->rx
.rxlink
= NULL
;
2096 #if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
2097 if (sc
->sc_ah
->ah_caps
.hw_caps
& ATH9K_HW_CAP_RFSILENT
)
2098 cancel_delayed_work_sync(&sc
->rf_kill
.rfkill_poll
);
2100 /* disable HAL and put h/w to sleep */
2101 ath9k_hw_disable(sc
->sc_ah
);
2102 ath9k_hw_configpcipowersave(sc
->sc_ah
, 1);
2104 sc
->sc_flags
|= SC_OP_INVALID
;
2106 mutex_unlock(&sc
->mutex
);
2108 DPRINTF(sc
, ATH_DBG_CONFIG
, "Driver halt\n");
2111 static int ath9k_add_interface(struct ieee80211_hw
*hw
,
2112 struct ieee80211_if_init_conf
*conf
)
2114 struct ath_softc
*sc
= hw
->priv
;
2115 struct ath_vif
*avp
= (void *)conf
->vif
->drv_priv
;
2116 enum nl80211_iftype ic_opmode
= NL80211_IFTYPE_UNSPECIFIED
;
2118 /* Support only vif for now */
2123 mutex_lock(&sc
->mutex
);
2125 switch (conf
->type
) {
2126 case NL80211_IFTYPE_STATION
:
2127 ic_opmode
= NL80211_IFTYPE_STATION
;
2129 case NL80211_IFTYPE_ADHOC
:
2130 ic_opmode
= NL80211_IFTYPE_ADHOC
;
2132 case NL80211_IFTYPE_AP
:
2133 ic_opmode
= NL80211_IFTYPE_AP
;
2136 DPRINTF(sc
, ATH_DBG_FATAL
,
2137 "Interface type %d not yet supported\n", conf
->type
);
2141 DPRINTF(sc
, ATH_DBG_CONFIG
, "Attach a VIF of type: %d\n", ic_opmode
);
2143 /* Set the VIF opmode */
2144 avp
->av_opmode
= ic_opmode
;
2147 if (ic_opmode
== NL80211_IFTYPE_AP
)
2148 ath9k_hw_set_tsfadjust(sc
->sc_ah
, 1);
2150 sc
->vifs
[0] = conf
->vif
;
2153 /* Set the device opmode */
2154 sc
->sc_ah
->ah_opmode
= ic_opmode
;
2157 * Enable MIB interrupts when there are hardware phy counters.
2158 * Note we only do this (at the moment) for station mode.
2160 if (ath9k_hw_phycounters(sc
->sc_ah
) &&
2161 ((conf
->type
== NL80211_IFTYPE_STATION
) ||
2162 (conf
->type
== NL80211_IFTYPE_ADHOC
)))
2163 sc
->imask
|= ATH9K_INT_MIB
;
2165 * Some hardware processes the TIM IE and fires an
2166 * interrupt when the TIM bit is set. For hardware
2167 * that does, if not overridden by configuration,
2168 * enable the TIM interrupt when operating as station.
2170 if ((sc
->sc_ah
->ah_caps
.hw_caps
& ATH9K_HW_CAP_ENHANCEDPM
) &&
2171 (conf
->type
== NL80211_IFTYPE_STATION
) &&
2172 !sc
->config
.swBeaconProcess
)
2173 sc
->imask
|= ATH9K_INT_TIM
;
2175 ath9k_hw_set_interrupts(sc
->sc_ah
, sc
->imask
);
2177 if (conf
->type
== NL80211_IFTYPE_AP
) {
2178 /* TODO: is this a suitable place to start ANI for AP mode? */
2180 mod_timer(&sc
->ani
.timer
,
2181 jiffies
+ msecs_to_jiffies(ATH_ANI_POLLINTERVAL
));
2184 mutex_unlock(&sc
->mutex
);
2189 static void ath9k_remove_interface(struct ieee80211_hw
*hw
,
2190 struct ieee80211_if_init_conf
*conf
)
2192 struct ath_softc
*sc
= hw
->priv
;
2193 struct ath_vif
*avp
= (void *)conf
->vif
->drv_priv
;
2195 DPRINTF(sc
, ATH_DBG_CONFIG
, "Detach Interface\n");
2197 mutex_lock(&sc
->mutex
);
2200 del_timer_sync(&sc
->ani
.timer
);
2202 /* Reclaim beacon resources */
2203 if (sc
->sc_ah
->ah_opmode
== NL80211_IFTYPE_AP
||
2204 sc
->sc_ah
->ah_opmode
== NL80211_IFTYPE_ADHOC
) {
2205 ath9k_hw_stoptxdma(sc
->sc_ah
, sc
->beacon
.beaconq
);
2206 ath_beacon_return(sc
, avp
);
2209 sc
->sc_flags
&= ~SC_OP_BEACONS
;
2214 mutex_unlock(&sc
->mutex
);
2217 static int ath9k_config(struct ieee80211_hw
*hw
, u32 changed
)
2219 struct ath_softc
*sc
= hw
->priv
;
2220 struct ieee80211_conf
*conf
= &hw
->conf
;
2222 mutex_lock(&sc
->mutex
);
2224 if (changed
& IEEE80211_CONF_CHANGE_PS
) {
2225 if (conf
->flags
& IEEE80211_CONF_PS
) {
2226 if ((sc
->imask
& ATH9K_INT_TIM_TIMER
) == 0) {
2227 sc
->imask
|= ATH9K_INT_TIM_TIMER
;
2228 ath9k_hw_set_interrupts(sc
->sc_ah
,
2231 ath9k_hw_setrxabort(sc
->sc_ah
, 1);
2232 ath9k_hw_setpower(sc
->sc_ah
, ATH9K_PM_NETWORK_SLEEP
);
2234 ath9k_hw_setpower(sc
->sc_ah
, ATH9K_PM_AWAKE
);
2235 ath9k_hw_setrxabort(sc
->sc_ah
, 0);
2236 sc
->sc_flags
&= ~SC_OP_WAIT_FOR_BEACON
;
2237 if (sc
->imask
& ATH9K_INT_TIM_TIMER
) {
2238 sc
->imask
&= ~ATH9K_INT_TIM_TIMER
;
2239 ath9k_hw_set_interrupts(sc
->sc_ah
,
2245 if (changed
& IEEE80211_CONF_CHANGE_CHANNEL
) {
2246 struct ieee80211_channel
*curchan
= hw
->conf
.channel
;
2247 int pos
= curchan
->hw_value
;
2249 DPRINTF(sc
, ATH_DBG_CONFIG
, "Set channel: %d MHz\n",
2250 curchan
->center_freq
);
2252 /* XXX: remove me eventualy */
2253 ath9k_update_ichannel(sc
, &sc
->sc_ah
->ah_channels
[pos
]);
2255 ath_update_chainmask(sc
, conf_is_ht(conf
));
2257 if (ath_set_channel(sc
, &sc
->sc_ah
->ah_channels
[pos
]) < 0) {
2258 DPRINTF(sc
, ATH_DBG_FATAL
, "Unable to set channel\n");
2259 mutex_unlock(&sc
->mutex
);
2264 if (changed
& IEEE80211_CONF_CHANGE_POWER
)
2265 sc
->config
.txpowlimit
= 2 * conf
->power_level
;
2267 mutex_unlock(&sc
->mutex
);
2272 static int ath9k_config_interface(struct ieee80211_hw
*hw
,
2273 struct ieee80211_vif
*vif
,
2274 struct ieee80211_if_conf
*conf
)
2276 struct ath_softc
*sc
= hw
->priv
;
2277 struct ath_hal
*ah
= sc
->sc_ah
;
2278 struct ath_vif
*avp
= (void *)vif
->drv_priv
;
2282 /* TODO: Need to decide which hw opmode to use for multi-interface
2284 if (vif
->type
== NL80211_IFTYPE_AP
&&
2285 ah
->ah_opmode
!= NL80211_IFTYPE_AP
) {
2286 ah
->ah_opmode
= NL80211_IFTYPE_STATION
;
2287 ath9k_hw_setopmode(ah
);
2288 ath9k_hw_write_associd(ah
, sc
->macaddr
, 0);
2289 /* Request full reset to get hw opmode changed properly */
2290 sc
->sc_flags
|= SC_OP_FULL_RESET
;
2293 if ((conf
->changed
& IEEE80211_IFCC_BSSID
) &&
2294 !is_zero_ether_addr(conf
->bssid
)) {
2295 switch (vif
->type
) {
2296 case NL80211_IFTYPE_STATION
:
2297 case NL80211_IFTYPE_ADHOC
:
2299 memcpy(sc
->curbssid
, conf
->bssid
, ETH_ALEN
);
2301 ath9k_hw_write_associd(sc
->sc_ah
, sc
->curbssid
,
2304 /* Set aggregation protection mode parameters */
2305 sc
->config
.ath_aggr_prot
= 0;
2307 DPRINTF(sc
, ATH_DBG_CONFIG
,
2308 "RX filter 0x%x bssid %pM aid 0x%x\n",
2309 rfilt
, sc
->curbssid
, sc
->curaid
);
2311 /* need to reconfigure the beacon */
2312 sc
->sc_flags
&= ~SC_OP_BEACONS
;
2320 if ((vif
->type
== NL80211_IFTYPE_ADHOC
) ||
2321 (vif
->type
== NL80211_IFTYPE_AP
)) {
2322 if ((conf
->changed
& IEEE80211_IFCC_BEACON
) ||
2323 (conf
->changed
& IEEE80211_IFCC_BEACON_ENABLED
&&
2324 conf
->enable_beacon
)) {
2326 * Allocate and setup the beacon frame.
2328 * Stop any previous beacon DMA. This may be
2329 * necessary, for example, when an ibss merge
2330 * causes reconfiguration; we may be called
2331 * with beacon transmission active.
2333 ath9k_hw_stoptxdma(sc
->sc_ah
, sc
->beacon
.beaconq
);
2335 error
= ath_beacon_alloc(sc
, 0);
2339 ath_beacon_sync(sc
, 0);
2343 /* Check for WLAN_CAPABILITY_PRIVACY ? */
2344 if ((avp
->av_opmode
!= NL80211_IFTYPE_STATION
)) {
2345 for (i
= 0; i
< IEEE80211_WEP_NKID
; i
++)
2346 if (ath9k_hw_keyisvalid(sc
->sc_ah
, (u16
)i
))
2347 ath9k_hw_keysetmac(sc
->sc_ah
,
2352 /* Only legacy IBSS for now */
2353 if (vif
->type
== NL80211_IFTYPE_ADHOC
)
2354 ath_update_chainmask(sc
, 0);
2359 #define SUPPORTED_FILTERS \
2360 (FIF_PROMISC_IN_BSS | \
2364 FIF_BCN_PRBRESP_PROMISC | \
2367 /* FIXME: sc->sc_full_reset ? */
2368 static void ath9k_configure_filter(struct ieee80211_hw
*hw
,
2369 unsigned int changed_flags
,
2370 unsigned int *total_flags
,
2372 struct dev_mc_list
*mclist
)
2374 struct ath_softc
*sc
= hw
->priv
;
2377 changed_flags
&= SUPPORTED_FILTERS
;
2378 *total_flags
&= SUPPORTED_FILTERS
;
2380 sc
->rx
.rxfilter
= *total_flags
;
2381 rfilt
= ath_calcrxfilter(sc
);
2382 ath9k_hw_setrxfilter(sc
->sc_ah
, rfilt
);
2384 if (changed_flags
& FIF_BCN_PRBRESP_PROMISC
) {
2385 if (*total_flags
& FIF_BCN_PRBRESP_PROMISC
)
2386 ath9k_hw_write_associd(sc
->sc_ah
, ath_bcast_mac
, 0);
2389 DPRINTF(sc
, ATH_DBG_CONFIG
, "Set HW RX filter: 0x%x\n", sc
->rx
.rxfilter
);
2392 static void ath9k_sta_notify(struct ieee80211_hw
*hw
,
2393 struct ieee80211_vif
*vif
,
2394 enum sta_notify_cmd cmd
,
2395 struct ieee80211_sta
*sta
)
2397 struct ath_softc
*sc
= hw
->priv
;
2400 case STA_NOTIFY_ADD
:
2401 ath_node_attach(sc
, sta
);
2403 case STA_NOTIFY_REMOVE
:
2404 ath_node_detach(sc
, sta
);
2411 static int ath9k_conf_tx(struct ieee80211_hw
*hw
, u16 queue
,
2412 const struct ieee80211_tx_queue_params
*params
)
2414 struct ath_softc
*sc
= hw
->priv
;
2415 struct ath9k_tx_queue_info qi
;
2418 if (queue
>= WME_NUM_AC
)
2421 mutex_lock(&sc
->mutex
);
2423 qi
.tqi_aifs
= params
->aifs
;
2424 qi
.tqi_cwmin
= params
->cw_min
;
2425 qi
.tqi_cwmax
= params
->cw_max
;
2426 qi
.tqi_burstTime
= params
->txop
;
2427 qnum
= ath_get_hal_qnum(queue
, sc
);
2429 DPRINTF(sc
, ATH_DBG_CONFIG
,
2430 "Configure tx [queue/halq] [%d/%d], "
2431 "aifs: %d, cw_min: %d, cw_max: %d, txop: %d\n",
2432 queue
, qnum
, params
->aifs
, params
->cw_min
,
2433 params
->cw_max
, params
->txop
);
2435 ret
= ath_txq_update(sc
, qnum
, &qi
);
2437 DPRINTF(sc
, ATH_DBG_FATAL
, "TXQ Update failed\n");
2439 mutex_unlock(&sc
->mutex
);
2444 static int ath9k_set_key(struct ieee80211_hw
*hw
,
2445 enum set_key_cmd cmd
,
2446 struct ieee80211_vif
*vif
,
2447 struct ieee80211_sta
*sta
,
2448 struct ieee80211_key_conf
*key
)
2450 struct ath_softc
*sc
= hw
->priv
;
2453 mutex_lock(&sc
->mutex
);
2454 ath9k_ps_wakeup(sc
);
2455 DPRINTF(sc
, ATH_DBG_KEYCACHE
, "Set HW Key\n");
2459 ret
= ath_key_config(sc
, sta
, key
);
2461 key
->hw_key_idx
= ret
;
2462 /* push IV and Michael MIC generation to stack */
2463 key
->flags
|= IEEE80211_KEY_FLAG_GENERATE_IV
;
2464 if (key
->alg
== ALG_TKIP
)
2465 key
->flags
|= IEEE80211_KEY_FLAG_GENERATE_MMIC
;
2466 if (sc
->sc_ah
->sw_mgmt_crypto
&& key
->alg
== ALG_CCMP
)
2467 key
->flags
|= IEEE80211_KEY_FLAG_SW_MGMT
;
2472 ath_key_delete(sc
, key
);
2478 ath9k_ps_restore(sc
);
2479 mutex_unlock(&sc
->mutex
);
2484 static void ath9k_bss_info_changed(struct ieee80211_hw
*hw
,
2485 struct ieee80211_vif
*vif
,
2486 struct ieee80211_bss_conf
*bss_conf
,
2489 struct ath_softc
*sc
= hw
->priv
;
2491 mutex_lock(&sc
->mutex
);
2493 if (changed
& BSS_CHANGED_ERP_PREAMBLE
) {
2494 DPRINTF(sc
, ATH_DBG_CONFIG
, "BSS Changed PREAMBLE %d\n",
2495 bss_conf
->use_short_preamble
);
2496 if (bss_conf
->use_short_preamble
)
2497 sc
->sc_flags
|= SC_OP_PREAMBLE_SHORT
;
2499 sc
->sc_flags
&= ~SC_OP_PREAMBLE_SHORT
;
2502 if (changed
& BSS_CHANGED_ERP_CTS_PROT
) {
2503 DPRINTF(sc
, ATH_DBG_CONFIG
, "BSS Changed CTS PROT %d\n",
2504 bss_conf
->use_cts_prot
);
2505 if (bss_conf
->use_cts_prot
&&
2506 hw
->conf
.channel
->band
!= IEEE80211_BAND_5GHZ
)
2507 sc
->sc_flags
|= SC_OP_PROTECT_ENABLE
;
2509 sc
->sc_flags
&= ~SC_OP_PROTECT_ENABLE
;
2512 if (changed
& BSS_CHANGED_ASSOC
) {
2513 DPRINTF(sc
, ATH_DBG_CONFIG
, "BSS Changed ASSOC %d\n",
2515 ath9k_bss_assoc_info(sc
, vif
, bss_conf
);
2518 mutex_unlock(&sc
->mutex
);
2521 static u64
ath9k_get_tsf(struct ieee80211_hw
*hw
)
2524 struct ath_softc
*sc
= hw
->priv
;
2526 mutex_lock(&sc
->mutex
);
2527 tsf
= ath9k_hw_gettsf64(sc
->sc_ah
);
2528 mutex_unlock(&sc
->mutex
);
2533 static void ath9k_set_tsf(struct ieee80211_hw
*hw
, u64 tsf
)
2535 struct ath_softc
*sc
= hw
->priv
;
2537 mutex_lock(&sc
->mutex
);
2538 ath9k_hw_settsf64(sc
->sc_ah
, tsf
);
2539 mutex_unlock(&sc
->mutex
);
2542 static void ath9k_reset_tsf(struct ieee80211_hw
*hw
)
2544 struct ath_softc
*sc
= hw
->priv
;
2546 mutex_lock(&sc
->mutex
);
2547 ath9k_hw_reset_tsf(sc
->sc_ah
);
2548 mutex_unlock(&sc
->mutex
);
2551 static int ath9k_ampdu_action(struct ieee80211_hw
*hw
,
2552 enum ieee80211_ampdu_mlme_action action
,
2553 struct ieee80211_sta
*sta
,
2556 struct ath_softc
*sc
= hw
->priv
;
2560 case IEEE80211_AMPDU_RX_START
:
2561 if (!(sc
->sc_flags
& SC_OP_RXAGGR
))
2564 case IEEE80211_AMPDU_RX_STOP
:
2566 case IEEE80211_AMPDU_TX_START
:
2567 ret
= ath_tx_aggr_start(sc
, sta
, tid
, ssn
);
2569 DPRINTF(sc
, ATH_DBG_FATAL
,
2570 "Unable to start TX aggregation\n");
2572 ieee80211_start_tx_ba_cb_irqsafe(hw
, sta
->addr
, tid
);
2574 case IEEE80211_AMPDU_TX_STOP
:
2575 ret
= ath_tx_aggr_stop(sc
, sta
, tid
);
2577 DPRINTF(sc
, ATH_DBG_FATAL
,
2578 "Unable to stop TX aggregation\n");
2580 ieee80211_stop_tx_ba_cb_irqsafe(hw
, sta
->addr
, tid
);
2582 case IEEE80211_AMPDU_TX_RESUME
:
2583 ath_tx_aggr_resume(sc
, sta
, tid
);
2586 DPRINTF(sc
, ATH_DBG_FATAL
, "Unknown AMPDU action\n");
2592 struct ieee80211_ops ath9k_ops
= {
2594 .start
= ath9k_start
,
2596 .add_interface
= ath9k_add_interface
,
2597 .remove_interface
= ath9k_remove_interface
,
2598 .config
= ath9k_config
,
2599 .config_interface
= ath9k_config_interface
,
2600 .configure_filter
= ath9k_configure_filter
,
2601 .sta_notify
= ath9k_sta_notify
,
2602 .conf_tx
= ath9k_conf_tx
,
2603 .bss_info_changed
= ath9k_bss_info_changed
,
2604 .set_key
= ath9k_set_key
,
2605 .get_tsf
= ath9k_get_tsf
,
2606 .set_tsf
= ath9k_set_tsf
,
2607 .reset_tsf
= ath9k_reset_tsf
,
2608 .ampdu_action
= ath9k_ampdu_action
,
2614 } ath_mac_bb_names
[] = {
2615 { AR_SREV_VERSION_5416_PCI
, "5416" },
2616 { AR_SREV_VERSION_5416_PCIE
, "5418" },
2617 { AR_SREV_VERSION_9100
, "9100" },
2618 { AR_SREV_VERSION_9160
, "9160" },
2619 { AR_SREV_VERSION_9280
, "9280" },
2620 { AR_SREV_VERSION_9285
, "9285" }
2626 } ath_rf_names
[] = {
2628 { AR_RAD5133_SREV_MAJOR
, "5133" },
2629 { AR_RAD5122_SREV_MAJOR
, "5122" },
2630 { AR_RAD2133_SREV_MAJOR
, "2133" },
2631 { AR_RAD2122_SREV_MAJOR
, "2122" }
2635 * Return the MAC/BB name. "????" is returned if the MAC/BB is unknown.
2638 ath_mac_bb_name(u32 mac_bb_version
)
2642 for (i
=0; i
<ARRAY_SIZE(ath_mac_bb_names
); i
++) {
2643 if (ath_mac_bb_names
[i
].version
== mac_bb_version
) {
2644 return ath_mac_bb_names
[i
].name
;
2652 * Return the RF name. "????" is returned if the RF is unknown.
2655 ath_rf_name(u16 rf_version
)
2659 for (i
=0; i
<ARRAY_SIZE(ath_rf_names
); i
++) {
2660 if (ath_rf_names
[i
].version
== rf_version
) {
2661 return ath_rf_names
[i
].name
;
2668 static int __init
ath9k_init(void)
2672 /* Register rate control algorithm */
2673 error
= ath_rate_control_register();
2676 "ath9k: Unable to register rate control "
2682 error
= ath_pci_init();
2685 "ath9k: No PCI devices found, driver not installed.\n");
2687 goto err_rate_unregister
;
2690 error
= ath_ahb_init();
2701 err_rate_unregister
:
2702 ath_rate_control_unregister();
2706 module_init(ath9k_init
);
2708 static void __exit
ath9k_exit(void)
2712 ath_rate_control_unregister();
2713 printk(KERN_INFO
"%s: Driver unloaded\n", dev_info
);
2715 module_exit(ath9k_exit
);