drivers/net/wireless/brcm80211/Kconfig

   1 config BRCMUTIL
   2         tristate
   3
   4 config BRCMSMAC
   5         tristate "Broadcom IEEE802.11n PCIe SoftMAC WLAN driver"
   6         depends on MAC80211
   7         depends on BCMA_POSSIBLE
   8         select BCMA
   9         select NEW_LEDS if BCMA_DRIVER_GPIO
  10         select LEDS_CLASS if BCMA_DRIVER_GPIO
  11         select BRCMUTIL
  12         select FW_LOADER
  13         select CORDIC
  14         ---help---
  15           This module adds support for PCIe wireless adapters based on Broadcom
  16           IEEE802.11n SoftMAC chipsets. It also has WLAN led support, which will
  17           be available if you select BCMA_DRIVER_GPIO. If you choose to build a
  18           module, the driver will be called brcmsmac.ko.
  19
  20 config BRCMFMAC
  21         tristate "Broadcom IEEE802.11n embedded FullMAC WLAN driver"
  22         depends on CFG80211
  23         select BRCMUTIL
  24         ---help---
  25           This module adds support for embedded wireless adapters based on
  26           Broadcom IEEE802.11n FullMAC chipsets. It has to work with at least
  27           one of the bus interface support. If you choose to build a module,
  28           it'll be called brcmfmac.ko.
  29
  30 config BRCMFMAC_PROTO_BCDC
  31         bool
  32
  33 config BRCMFMAC_PROTO_MSGBUF
  34         bool
  35
  36 config BRCMFMAC_SDIO
  37         bool "SDIO bus interface support for FullMAC driver"
  38         depends on (MMC = y || MMC = BRCMFMAC)
  39         depends on BRCMFMAC
  40         select BRCMFMAC_PROTO_BCDC
  41         select FW_LOADER
  42         default y
  43         ---help---
  44           This option enables the SDIO bus interface support for Broadcom
  45           IEEE802.11n embedded FullMAC WLAN driver. Say Y if you want to
  46           use the driver for a SDIO wireless card.
  47
  48 config BRCMFMAC_USB
  49         bool "USB bus interface support for FullMAC driver"
  50         depends on (USB = y || USB = BRCMFMAC)
  51         depends on BRCMFMAC
  52         select BRCMFMAC_PROTO_BCDC
  53         select FW_LOADER
  54         ---help---
  55           This option enables the USB bus interface support for Broadcom
  56           IEEE802.11n embedded FullMAC WLAN driver. Say Y if you want to
  57           use the driver for an USB wireless card.
  58
  59 config BRCMFMAC_PCIE
  60         bool "PCIE bus interface support for FullMAC driver"
  61         depends on BRCMFMAC
  62         depends on PCI
  63         depends on HAS_DMA
  64         select BRCMFMAC_PROTO_MSGBUF
  65         select FW_LOADER
  66         ---help---
  67           This option enables the PCIE bus interface support for Broadcom
  68           IEEE802.11ac embedded FullMAC WLAN driver. Say Y if you want to
  69           use the driver for an PCIE wireless card.
  70
  71 config BRCM_TRACING
  72         bool "Broadcom device tracing"
  73         depends on BRCMSMAC || BRCMFMAC
  74         ---help---
  75           If you say Y here, the Broadcom wireless drivers will register
  76           with ftrace to dump event information into the trace ringbuffer.
  77           Tracing can be enabled at runtime to aid in debugging wireless
  78           issues. This option adds a small amount of overhead when tracing
  79           is disabled. If unsure, say Y to allow developers to better help
  80           you when wireless problems occur.
  81
  82 config BRCMDBG
  83         bool "Broadcom driver debug functions"
  84         depends on BRCMSMAC || BRCMFMAC
  85         select WANT_DEV_COREDUMP
  86         ---help---
  87           Selecting this enables additional code for debug purposes.