projects / deliverable / linux.git / blob
? search:


73fe3cdf796b28555dcc8e044aaccedf936d7071
[deliverable/linux.git] / drivers / net / wireless / iwlegacy / iwl-3945.c
1 /******************************************************************************
2 *
3 * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
4 *
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of version 2 of the GNU General Public License as
7 * published by the Free Software Foundation.
8 *
9 * This program is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
12 * more details.
13 *
14 * You should have received a copy of the GNU General Public License along with
15 * this program; if not, write to the Free Software Foundation, Inc.,
16 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
17 *
18 * The full GNU General Public License is included in this distribution in the
19 * file called LICENSE.
20 *
21 * Contact Information:
22 * Intel Linux Wireless <ilw@linux.intel.com>
23 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
24 *
25 *****************************************************************************/
26
27 #include <linux/kernel.h>
28 #include <linux/module.h>
29 #include <linux/init.h>
30 #include <linux/slab.h>
31 #include <linux/pci.h>
32 #include <linux/dma-mapping.h>
33 #include <linux/delay.h>
34 #include <linux/sched.h>
35 #include <linux/skbuff.h>
36 #include <linux/netdevice.h>
37 #include <linux/wireless.h>
38 #include <linux/firmware.h>
39 #include <linux/etherdevice.h>
40 #include <asm/unaligned.h>
41 #include <net/mac80211.h>
42
43 #include "iwl-fh.h"
44 #include "iwl-3945-fh.h"
45 #include "iwl-commands.h"
46 #include "iwl-sta.h"
47 #include "iwl-3945.h"
48 #include "iwl-eeprom.h"
49 #include "iwl-core.h"
50 #include "iwl-helpers.h"
51 #include "iwl-led.h"
52 #include "iwl-3945-led.h"
53 #include "iwl-3945-debugfs.h"
54
55 #define IWL_DECLARE_RATE_INFO(r, ip, in, rp, rn, pp, np) \
56 [IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP, \
57 IWL_RATE_##r##M_IEEE, \
58 IWL_RATE_##ip##M_INDEX, \
59 IWL_RATE_##in##M_INDEX, \
60 IWL_RATE_##rp##M_INDEX, \
61 IWL_RATE_##rn##M_INDEX, \
62 IWL_RATE_##pp##M_INDEX, \
63 IWL_RATE_##np##M_INDEX, \
64 IWL_RATE_##r##M_INDEX_TABLE, \
65 IWL_RATE_##ip##M_INDEX_TABLE }
66
67 /*
68 * Parameter order:
69 * rate, prev rate, next rate, prev tgg rate, next tgg rate
70 *
71 * If there isn't a valid next or previous rate then INV is used which
72 * maps to IWL_RATE_INVALID
73 *
74 */
75 const struct iwl3945_rate_info iwl3945_rates[IWL_RATE_COUNT_3945] = {
76 IWL_DECLARE_RATE_INFO(1, INV, 2, INV, 2, INV, 2), /* 1mbps */
77 IWL_DECLARE_RATE_INFO(2, 1, 5, 1, 5, 1, 5), /* 2mbps */
78 IWL_DECLARE_RATE_INFO(5, 2, 6, 2, 11, 2, 11), /*5.5mbps */
79 IWL_DECLARE_RATE_INFO(11, 9, 12, 5, 12, 5, 18), /* 11mbps */
80 IWL_DECLARE_RATE_INFO(6, 5, 9, 5, 11, 5, 11), /* 6mbps */
81 IWL_DECLARE_RATE_INFO(9, 6, 11, 5, 11, 5, 11), /* 9mbps */
82 IWL_DECLARE_RATE_INFO(12, 11, 18, 11, 18, 11, 18), /* 12mbps */
83 IWL_DECLARE_RATE_INFO(18, 12, 24, 12, 24, 11, 24), /* 18mbps */
84 IWL_DECLARE_RATE_INFO(24, 18, 36, 18, 36, 18, 36), /* 24mbps */
85 IWL_DECLARE_RATE_INFO(36, 24, 48, 24, 48, 24, 48), /* 36mbps */
86 IWL_DECLARE_RATE_INFO(48, 36, 54, 36, 54, 36, 54), /* 48mbps */
87 IWL_DECLARE_RATE_INFO(54, 48, INV, 48, INV, 48, INV),/* 54mbps */
88 };
89
90 static inline u8 iwl3945_get_prev_ieee_rate(u8 rate_index)
91 {
92 u8 rate = iwl3945_rates[rate_index].prev_ieee;
93
94 if (rate == IWL_RATE_INVALID)
95 rate = rate_index;
96 return rate;
97 }
98
99 /* 1 = enable the iwl3945_disable_events() function */
100 #define IWL_EVT_DISABLE (0)
101 #define IWL_EVT_DISABLE_SIZE (1532/32)
102
103 /**
104 * iwl3945_disable_events - Disable selected events in uCode event log
105 *
106 * Disable an event by writing "1"s into "disable"
107 * bitmap in SRAM. Bit position corresponds to Event # (id/type).
108 * Default values of 0 enable uCode events to be logged.
109 * Use for only special debugging. This function is just a placeholder as-is,
110 * you'll need to provide the special bits! ...
111 * ... and set IWL_EVT_DISABLE to 1. */
112 void iwl3945_disable_events(struct iwl_priv *priv)
113 {
114 int i;
115 u32 base; /* SRAM address of event log header */
116 u32 disable_ptr; /* SRAM address of event-disable bitmap array */
117 u32 array_size; /* # of u32 entries in array */
118 static const u32 evt_disable[IWL_EVT_DISABLE_SIZE] = {
119 0x00000000, /* 31 - 0 Event id numbers */
120 0x00000000, /* 63 - 32 */
121 0x00000000, /* 95 - 64 */
122 0x00000000, /* 127 - 96 */
123 0x00000000, /* 159 - 128 */
124 0x00000000, /* 191 - 160 */
125 0x00000000, /* 223 - 192 */
126 0x00000000, /* 255 - 224 */
127 0x00000000, /* 287 - 256 */
128 0x00000000, /* 319 - 288 */
129 0x00000000, /* 351 - 320 */
130 0x00000000, /* 383 - 352 */
131 0x00000000, /* 415 - 384 */
132 0x00000000, /* 447 - 416 */
133 0x00000000, /* 479 - 448 */
134 0x00000000, /* 511 - 480 */
135 0x00000000, /* 543 - 512 */
136 0x00000000, /* 575 - 544 */
137 0x00000000, /* 607 - 576 */
138 0x00000000, /* 639 - 608 */
139 0x00000000, /* 671 - 640 */
140 0x00000000, /* 703 - 672 */
141 0x00000000, /* 735 - 704 */
142 0x00000000, /* 767 - 736 */
143 0x00000000, /* 799 - 768 */
144 0x00000000, /* 831 - 800 */
145 0x00000000, /* 863 - 832 */
146 0x00000000, /* 895 - 864 */
147 0x00000000, /* 927 - 896 */
148 0x00000000, /* 959 - 928 */
149 0x00000000, /* 991 - 960 */
150 0x00000000, /* 1023 - 992 */
151 0x00000000, /* 1055 - 1024 */
152 0x00000000, /* 1087 - 1056 */
153 0x00000000, /* 1119 - 1088 */
154 0x00000000, /* 1151 - 1120 */
155 0x00000000, /* 1183 - 1152 */
156 0x00000000, /* 1215 - 1184 */
157 0x00000000, /* 1247 - 1216 */
158 0x00000000, /* 1279 - 1248 */
159 0x00000000, /* 1311 - 1280 */
160 0x00000000, /* 1343 - 1312 */
161 0x00000000, /* 1375 - 1344 */
162 0x00000000, /* 1407 - 1376 */
163 0x00000000, /* 1439 - 1408 */
164 0x00000000, /* 1471 - 1440 */
165 0x00000000, /* 1503 - 1472 */
166 };
167
168 base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
169 if (!iwl3945_hw_valid_rtc_data_addr(base)) {
170 IWL_ERR(priv, "Invalid event log pointer 0x%08X\n", base);
171 return;
172 }
173
174 disable_ptr = iwl_legacy_read_targ_mem(priv, base + (4 * sizeof(u32)));
175 array_size = iwl_legacy_read_targ_mem(priv, base + (5 * sizeof(u32)));
176
177 if (IWL_EVT_DISABLE && (array_size == IWL_EVT_DISABLE_SIZE)) {
178 IWL_DEBUG_INFO(priv, "Disabling selected uCode log events at 0x%x\n",
179 disable_ptr);
180 for (i = 0; i < IWL_EVT_DISABLE_SIZE; i++)
181 iwl_legacy_write_targ_mem(priv,
182 disable_ptr + (i * sizeof(u32)),
183 evt_disable[i]);
184
185 } else {
186 IWL_DEBUG_INFO(priv, "Selected uCode log events may be disabled\n");
187 IWL_DEBUG_INFO(priv, " by writing \"1\"s into disable bitmap\n");
188 IWL_DEBUG_INFO(priv, " in SRAM at 0x%x, size %d u32s\n",
189 disable_ptr, array_size);
190 }
191
192 }
193
194 static int iwl3945_hwrate_to_plcp_idx(u8 plcp)
195 {
196 int idx;
197
198 for (idx = 0; idx < IWL_RATE_COUNT_3945; idx++)
199 if (iwl3945_rates[idx].plcp == plcp)
200 return idx;
201 return -1;
202 }
203
204 #ifdef CONFIG_IWLWIFI_LEGACY_DEBUG
205 #define TX_STATUS_ENTRY(x) case TX_3945_STATUS_FAIL_ ## x: return #x
206
207 static const char *iwl3945_get_tx_fail_reason(u32 status)
208 {
209 switch (status & TX_STATUS_MSK) {
210 case TX_3945_STATUS_SUCCESS:
211 return "SUCCESS";
212 TX_STATUS_ENTRY(SHORT_LIMIT);
213 TX_STATUS_ENTRY(LONG_LIMIT);
214 TX_STATUS_ENTRY(FIFO_UNDERRUN);
215 TX_STATUS_ENTRY(MGMNT_ABORT);
216 TX_STATUS_ENTRY(NEXT_FRAG);
217 TX_STATUS_ENTRY(LIFE_EXPIRE);
218 TX_STATUS_ENTRY(DEST_PS);
219 TX_STATUS_ENTRY(ABORTED);
220 TX_STATUS_ENTRY(BT_RETRY);
221 TX_STATUS_ENTRY(STA_INVALID);
222 TX_STATUS_ENTRY(FRAG_DROPPED);
223 TX_STATUS_ENTRY(TID_DISABLE);
224 TX_STATUS_ENTRY(FRAME_FLUSHED);
225 TX_STATUS_ENTRY(INSUFFICIENT_CF_POLL);
226 TX_STATUS_ENTRY(TX_LOCKED);
227 TX_STATUS_ENTRY(NO_BEACON_ON_RADAR);
228 }
229
230 return "UNKNOWN";
231 }
232 #else
233 static inline const char *iwl3945_get_tx_fail_reason(u32 status)
234 {
235 return "";
236 }
237 #endif
238
239 /*
240 * get ieee prev rate from rate scale table.
241 * for A and B mode we need to overright prev
242 * value
243 */
244 int iwl3945_rs_next_rate(struct iwl_priv *priv, int rate)
245 {
246 int next_rate = iwl3945_get_prev_ieee_rate(rate);
247
248 switch (priv->band) {
249 case IEEE80211_BAND_5GHZ:
250 if (rate == IWL_RATE_12M_INDEX)
251 next_rate = IWL_RATE_9M_INDEX;
252 else if (rate == IWL_RATE_6M_INDEX)
253 next_rate = IWL_RATE_6M_INDEX;
254 break;
255 case IEEE80211_BAND_2GHZ:
256 if (!(priv->_3945.sta_supp_rates & IWL_OFDM_RATES_MASK) &&
257 iwl_legacy_is_associated(priv, IWL_RXON_CTX_BSS)) {
258 if (rate == IWL_RATE_11M_INDEX)
259 next_rate = IWL_RATE_5M_INDEX;
260 }
261 break;
262
263 default:
264 break;
265 }
266
267 return next_rate;
268 }
269
270
271 /**
272 * iwl3945_tx_queue_reclaim - Reclaim Tx queue entries already Tx'd
273 *
274 * When FW advances 'R' index, all entries between old and new 'R' index
275 * need to be reclaimed. As result, some free space forms. If there is
276 * enough free space (> low mark), wake the stack that feeds us.
277 */
278 static void iwl3945_tx_queue_reclaim(struct iwl_priv *priv,
279 int txq_id, int index)
280 {
281 struct iwl_tx_queue *txq = &priv->txq[txq_id];
282 struct iwl_queue *q = &txq->q;
283 struct iwl_tx_info *tx_info;
284
285 BUG_ON(txq_id == IWL39_CMD_QUEUE_NUM);
286
287 for (index = iwl_legacy_queue_inc_wrap(index, q->n_bd);
288 q->read_ptr != index;
289 q->read_ptr = iwl_legacy_queue_inc_wrap(q->read_ptr, q->n_bd)) {
290
291 tx_info = &txq->txb[txq->q.read_ptr];
292 ieee80211_tx_status_irqsafe(priv->hw, tx_info->skb);
293 tx_info->skb = NULL;
294 priv->cfg->ops->lib->txq_free_tfd(priv, txq);
295 }
296
297 if (iwl_legacy_queue_space(q) > q->low_mark && (txq_id >= 0) &&
298 (txq_id != IWL39_CMD_QUEUE_NUM) &&
299 priv->mac80211_registered)
300 iwl_legacy_wake_queue(priv, txq);
301 }
302
303 /**
304 * iwl3945_rx_reply_tx - Handle Tx response
305 */
306 static void iwl3945_rx_reply_tx(struct iwl_priv *priv,
307 struct iwl_rx_mem_buffer *rxb)
308 {
309 struct iwl_rx_packet *pkt = rxb_addr(rxb);
310 u16 sequence = le16_to_cpu(pkt->hdr.sequence);
311 int txq_id = SEQ_TO_QUEUE(sequence);
312 int index = SEQ_TO_INDEX(sequence);
313 struct iwl_tx_queue *txq = &priv->txq[txq_id];
314 struct ieee80211_tx_info *info;
315 struct iwl3945_tx_resp *tx_resp = (void *)&pkt->u.raw[0];
316 u32 status = le32_to_cpu(tx_resp->status);
317 int rate_idx;
318 int fail;
319
320 if ((index >= txq->q.n_bd) || (iwl_legacy_queue_used(&txq->q, index) == 0)) {
321 IWL_ERR(priv, "Read index for DMA queue txq_id (%d) index %d "
322 "is out of range [0-%d] %d %d\n", txq_id,
323 index, txq->q.n_bd, txq->q.write_ptr,
324 txq->q.read_ptr);
325 return;
326 }
327
328 txq->time_stamp = jiffies;
329 info = IEEE80211_SKB_CB(txq->txb[txq->q.read_ptr].skb);
330 ieee80211_tx_info_clear_status(info);
331
332 /* Fill the MRR chain with some info about on-chip retransmissions */
333 rate_idx = iwl3945_hwrate_to_plcp_idx(tx_resp->rate);
334 if (info->band == IEEE80211_BAND_5GHZ)
335 rate_idx -= IWL_FIRST_OFDM_RATE;
336
337 fail = tx_resp->failure_frame;
338
339 info->status.rates[0].idx = rate_idx;
340 info->status.rates[0].count = fail + 1; /* add final attempt */
341
342 /* tx_status->rts_retry_count = tx_resp->failure_rts; */
343 info->flags |= ((status & TX_STATUS_MSK) == TX_STATUS_SUCCESS) ?
344 IEEE80211_TX_STAT_ACK : 0;
345
346 IWL_DEBUG_TX(priv, "Tx queue %d Status %s (0x%08x) plcp rate %d retries %d\n",
347 txq_id, iwl3945_get_tx_fail_reason(status), status,
348 tx_resp->rate, tx_resp->failure_frame);
349
350 IWL_DEBUG_TX_REPLY(priv, "Tx queue reclaim %d\n", index);
351 iwl3945_tx_queue_reclaim(priv, txq_id, index);
352
353 if (status & TX_ABORT_REQUIRED_MSK)
354 IWL_ERR(priv, "TODO: Implement Tx ABORT REQUIRED!!!\n");
355 }
356
357
358
359 /*****************************************************************************
360 *
361 * Intel PRO/Wireless 3945ABG/BG Network Connection
362 *
363 * RX handler implementations
364 *
365 *****************************************************************************/
366 #ifdef CONFIG_IWLWIFI_LEGACY_DEBUGFS
367 static void iwl3945_accumulative_statistics(struct iwl_priv *priv,
368 __le32 *stats)
369 {
370 int i;
371 __le32 *prev_stats;
372 u32 *accum_stats;
373 u32 *delta, *max_delta;
374
375 prev_stats = (__le32 *)&priv->_3945.statistics;
376 accum_stats = (u32 *)&priv->_3945.accum_statistics;
377 delta = (u32 *)&priv->_3945.delta_statistics;
378 max_delta = (u32 *)&priv->_3945.max_delta;
379
380 for (i = sizeof(__le32); i < sizeof(struct iwl3945_notif_statistics);
381 i += sizeof(__le32), stats++, prev_stats++, delta++,
382 max_delta++, accum_stats++) {
383 if (le32_to_cpu(*stats) > le32_to_cpu(*prev_stats)) {
384 *delta = (le32_to_cpu(*stats) -
385 le32_to_cpu(*prev_stats));
386 *accum_stats += *delta;
387 if (*delta > *max_delta)
388 *max_delta = *delta;
389 }
390 }
391
392 /* reset accumulative statistics for "no-counter" type statistics */
393 priv->_3945.accum_statistics.general.temperature =
394 priv->_3945.statistics.general.temperature;
395 priv->_3945.accum_statistics.general.ttl_timestamp =
396 priv->_3945.statistics.general.ttl_timestamp;
397 }
398 #endif
399
400 void iwl3945_hw_rx_statistics(struct iwl_priv *priv,
401 struct iwl_rx_mem_buffer *rxb)
402 {
403 struct iwl_rx_packet *pkt = rxb_addr(rxb);
404
405 IWL_DEBUG_RX(priv, "Statistics notification received (%d vs %d).\n",
406 (int)sizeof(struct iwl3945_notif_statistics),
407 le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK);
408 #ifdef CONFIG_IWLWIFI_LEGACY_DEBUGFS
409 iwl3945_accumulative_statistics(priv, (__le32 *)&pkt->u.raw);
410 #endif
411
412 memcpy(&priv->_3945.statistics, pkt->u.raw, sizeof(priv->_3945.statistics));
413 }
414
415 void iwl3945_reply_statistics(struct iwl_priv *priv,
416 struct iwl_rx_mem_buffer *rxb)
417 {
418 struct iwl_rx_packet *pkt = rxb_addr(rxb);
419 __le32 *flag = (__le32 *)&pkt->u.raw;
420
421 if (le32_to_cpu(*flag) & UCODE_STATISTICS_CLEAR_MSK) {
422 #ifdef CONFIG_IWLWIFI_LEGACY_DEBUGFS
423 memset(&priv->_3945.accum_statistics, 0,
424 sizeof(struct iwl3945_notif_statistics));
425 memset(&priv->_3945.delta_statistics, 0,
426 sizeof(struct iwl3945_notif_statistics));
427 memset(&priv->_3945.max_delta, 0,
428 sizeof(struct iwl3945_notif_statistics));
429 #endif
430 IWL_DEBUG_RX(priv, "Statistics have been cleared\n");
431 }
432 iwl3945_hw_rx_statistics(priv, rxb);
433 }
434
435
436 /******************************************************************************
437 *
438 * Misc. internal state and helper functions
439 *
440 ******************************************************************************/
441
442 /* This is necessary only for a number of statistics, see the caller. */
443 static int iwl3945_is_network_packet(struct iwl_priv *priv,
444 struct ieee80211_hdr *header)
445 {
446 /* Filter incoming packets to determine if they are targeted toward
447 * this network, discarding packets coming from ourselves */
448 switch (priv->iw_mode) {
449 case NL80211_IFTYPE_ADHOC: /* Header: Dest. | Source | BSSID */
450 /* packets to our IBSS update information */
451 return !compare_ether_addr(header->addr3, priv->bssid);
452 case NL80211_IFTYPE_STATION: /* Header: Dest. | AP{BSSID} | Source */
453 /* packets to our IBSS update information */
454 return !compare_ether_addr(header->addr2, priv->bssid);
455 default:
456 return 1;
457 }
458 }
459
460 static void iwl3945_pass_packet_to_mac80211(struct iwl_priv *priv,
461 struct iwl_rx_mem_buffer *rxb,
462 struct ieee80211_rx_status *stats)
463 {
464 struct iwl_rx_packet *pkt = rxb_addr(rxb);
465 struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)IWL_RX_DATA(pkt);
466 struct iwl3945_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt);
467 struct iwl3945_rx_frame_end *rx_end = IWL_RX_END(pkt);
468 u16 len = le16_to_cpu(rx_hdr->len);
469 struct sk_buff *skb;
470 __le16 fc = hdr->frame_control;
471
472 /* We received data from the HW, so stop the watchdog */
473 if (unlikely(len + IWL39_RX_FRAME_SIZE >
474 PAGE_SIZE << priv->hw_params.rx_page_order)) {
475 IWL_DEBUG_DROP(priv, "Corruption detected!\n");
476 return;
477 }
478
479 /* We only process data packets if the interface is open */
480 if (unlikely(!priv->is_open)) {
481 IWL_DEBUG_DROP_LIMIT(priv,
482 "Dropping packet while interface is not open.\n");
483 return;
484 }
485
486 skb = dev_alloc_skb(128);
487 if (!skb) {
488 IWL_ERR(priv, "dev_alloc_skb failed\n");
489 return;
490 }
491
492 if (!iwl3945_mod_params.sw_crypto)
493 iwl_legacy_set_decrypted_flag(priv,
494 (struct ieee80211_hdr *)rxb_addr(rxb),
495 le32_to_cpu(rx_end->status), stats);
496
497 skb_add_rx_frag(skb, 0, rxb->page,
498 (void *)rx_hdr->payload - (void *)pkt, len);
499
500 iwl_legacy_update_stats(priv, false, fc, len);
501 memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats));
502
503 ieee80211_rx(priv->hw, skb);
504 priv->alloc_rxb_page--;
505 rxb->page = NULL;
506 }
507
508 #define IWL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6)
509
510 static void iwl3945_rx_reply_rx(struct iwl_priv *priv,
511 struct iwl_rx_mem_buffer *rxb)
512 {
513 struct ieee80211_hdr *header;
514 struct ieee80211_rx_status rx_status;
515 struct iwl_rx_packet *pkt = rxb_addr(rxb);
516 struct iwl3945_rx_frame_stats *rx_stats = IWL_RX_STATS(pkt);
517 struct iwl3945_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt);
518 struct iwl3945_rx_frame_end *rx_end = IWL_RX_END(pkt);
519 u16 rx_stats_sig_avg __maybe_unused = le16_to_cpu(rx_stats->sig_avg);
520 u16 rx_stats_noise_diff __maybe_unused = le16_to_cpu(rx_stats->noise_diff);
521 u8 network_packet;
522
523 rx_status.flag = 0;
524 rx_status.mactime = le64_to_cpu(rx_end->timestamp);
525 rx_status.band = (rx_hdr->phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ?
526 IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;
527 rx_status.freq =
528 ieee80211_channel_to_frequency(le16_to_cpu(rx_hdr->channel),
529 rx_status.band);
530
531 rx_status.rate_idx = iwl3945_hwrate_to_plcp_idx(rx_hdr->rate);
532 if (rx_status.band == IEEE80211_BAND_5GHZ)
533 rx_status.rate_idx -= IWL_FIRST_OFDM_RATE;
534
535 rx_status.antenna = (le16_to_cpu(rx_hdr->phy_flags) &
536 RX_RES_PHY_FLAGS_ANTENNA_MSK) >> 4;
537
538 /* set the preamble flag if appropriate */
539 if (rx_hdr->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK)
540 rx_status.flag |= RX_FLAG_SHORTPRE;
541
542 if ((unlikely(rx_stats->phy_count > 20))) {
543 IWL_DEBUG_DROP(priv, "dsp size out of range [0,20]: %d/n",
544 rx_stats->phy_count);
545 return;
546 }
547
548 if (!(rx_end->status & RX_RES_STATUS_NO_CRC32_ERROR)
549 || !(rx_end->status & RX_RES_STATUS_NO_RXE_OVERFLOW)) {
550 IWL_DEBUG_RX(priv, "Bad CRC or FIFO: 0x%08X.\n", rx_end->status);
551 return;
552 }
553
554
555
556 /* Convert 3945's rssi indicator to dBm */
557 rx_status.signal = rx_stats->rssi - IWL39_RSSI_OFFSET;
558
559 IWL_DEBUG_STATS(priv, "Rssi %d sig_avg %d noise_diff %d\n",
560 rx_status.signal, rx_stats_sig_avg,
561 rx_stats_noise_diff);
562
563 header = (struct ieee80211_hdr *)IWL_RX_DATA(pkt);
564
565 network_packet = iwl3945_is_network_packet(priv, header);
566
567 IWL_DEBUG_STATS_LIMIT(priv, "[%c] %d RSSI:%d Signal:%u, Rate:%u\n",
568 network_packet ? '*' : ' ',
569 le16_to_cpu(rx_hdr->channel),
570 rx_status.signal, rx_status.signal,
571 rx_status.rate_idx);
572
573 iwl_legacy_dbg_log_rx_data_frame(priv, le16_to_cpu(rx_hdr->len),
574 header);
575
576 if (network_packet) {
577 priv->_3945.last_beacon_time =
578 le32_to_cpu(rx_end->beacon_timestamp);
579 priv->_3945.last_tsf = le64_to_cpu(rx_end->timestamp);
580 priv->_3945.last_rx_rssi = rx_status.signal;
581 }
582
583 iwl3945_pass_packet_to_mac80211(priv, rxb, &rx_status);
584 }
585
586 int iwl3945_hw_txq_attach_buf_to_tfd(struct iwl_priv *priv,
587 struct iwl_tx_queue *txq,
588 dma_addr_t addr, u16 len, u8 reset, u8 pad)
589 {
590 int count;
591 struct iwl_queue *q;
592 struct iwl3945_tfd *tfd, *tfd_tmp;
593
594 q = &txq->q;
595 tfd_tmp = (struct iwl3945_tfd *)txq->tfds;
596 tfd = &tfd_tmp[q->write_ptr];
597
598 if (reset)
599 memset(tfd, 0, sizeof(*tfd));
600
601 count = TFD_CTL_COUNT_GET(le32_to_cpu(tfd->control_flags));
602
603 if ((count >= NUM_TFD_CHUNKS) || (count < 0)) {
604 IWL_ERR(priv, "Error can not send more than %d chunks\n",
605 NUM_TFD_CHUNKS);
606 return -EINVAL;
607 }
608
609 tfd->tbs[count].addr = cpu_to_le32(addr);
610 tfd->tbs[count].len = cpu_to_le32(len);
611
612 count++;
613
614 tfd->control_flags = cpu_to_le32(TFD_CTL_COUNT_SET(count) |
615 TFD_CTL_PAD_SET(pad));
616
617 return 0;
618 }
619
620 /**
621 * iwl3945_hw_txq_free_tfd - Free one TFD, those at index [txq->q.read_ptr]
622 *
623 * Does NOT advance any indexes
624 */
625 void iwl3945_hw_txq_free_tfd(struct iwl_priv *priv, struct iwl_tx_queue *txq)
626 {
627 struct iwl3945_tfd *tfd_tmp = (struct iwl3945_tfd *)txq->tfds;
628 int index = txq->q.read_ptr;
629 struct iwl3945_tfd *tfd = &tfd_tmp[index];
630 struct pci_dev *dev = priv->pci_dev;
631 int i;
632 int counter;
633
634 /* sanity check */
635 counter = TFD_CTL_COUNT_GET(le32_to_cpu(tfd->control_flags));
636 if (counter > NUM_TFD_CHUNKS) {
637 IWL_ERR(priv, "Too many chunks: %i\n", counter);
638 /* @todo issue fatal error, it is quite serious situation */
639 return;
640 }
641
642 /* Unmap tx_cmd */
643 if (counter)
644 pci_unmap_single(dev,
645 dma_unmap_addr(&txq->meta[index], mapping),
646 dma_unmap_len(&txq->meta[index], len),
647 PCI_DMA_TODEVICE);
648
649 /* unmap chunks if any */
650
651 for (i = 1; i < counter; i++)
652 pci_unmap_single(dev, le32_to_cpu(tfd->tbs[i].addr),
653 le32_to_cpu(tfd->tbs[i].len), PCI_DMA_TODEVICE);
654
655 /* free SKB */
656 if (txq->txb) {
657 struct sk_buff *skb;
658
659 skb = txq->txb[txq->q.read_ptr].skb;
660
661 /* can be called from irqs-disabled context */
662 if (skb) {
663 dev_kfree_skb_any(skb);
664 txq->txb[txq->q.read_ptr].skb = NULL;
665 }
666 }
667 }
668
669 /**
670 * iwl3945_hw_build_tx_cmd_rate - Add rate portion to TX_CMD:
671 *
672 */
673 void iwl3945_hw_build_tx_cmd_rate(struct iwl_priv *priv,
674 struct iwl_device_cmd *cmd,
675 struct ieee80211_tx_info *info,
676 struct ieee80211_hdr *hdr,
677 int sta_id, int tx_id)
678 {
679 u16 hw_value = ieee80211_get_tx_rate(priv->hw, info)->hw_value;
680 u16 rate_index = min(hw_value & 0xffff, IWL_RATE_COUNT_3945);
681 u16 rate_mask;
682 int rate;
683 u8 rts_retry_limit;
684 u8 data_retry_limit;
685 __le32 tx_flags;
686 __le16 fc = hdr->frame_control;
687 struct iwl3945_tx_cmd *tx_cmd = (struct iwl3945_tx_cmd *)cmd->cmd.payload;
688
689 rate = iwl3945_rates[rate_index].plcp;
690 tx_flags = tx_cmd->tx_flags;
691
692 /* We need to figure out how to get the sta->supp_rates while
693 * in this running context */
694 rate_mask = IWL_RATES_MASK_3945;
695
696 /* Set retry limit on DATA packets and Probe Responses*/
697 if (ieee80211_is_probe_resp(fc))
698 data_retry_limit = 3;
699 else
700 data_retry_limit = IWL_DEFAULT_TX_RETRY;
701 tx_cmd->data_retry_limit = data_retry_limit;
702
703 if (tx_id >= IWL39_CMD_QUEUE_NUM)
704 rts_retry_limit = 3;
705 else
706 rts_retry_limit = 7;
707
708 if (data_retry_limit < rts_retry_limit)
709 rts_retry_limit = data_retry_limit;
710 tx_cmd->rts_retry_limit = rts_retry_limit;
711
712 tx_cmd->rate = rate;
713 tx_cmd->tx_flags = tx_flags;
714
715 /* OFDM */
716 tx_cmd->supp_rates[0] =
717 ((rate_mask & IWL_OFDM_RATES_MASK) >> IWL_FIRST_OFDM_RATE) & 0xFF;
718
719 /* CCK */
720 tx_cmd->supp_rates[1] = (rate_mask & 0xF);
721
722 IWL_DEBUG_RATE(priv, "Tx sta id: %d, rate: %d (plcp), flags: 0x%4X "
723 "cck/ofdm mask: 0x%x/0x%x\n", sta_id,
724 tx_cmd->rate, le32_to_cpu(tx_cmd->tx_flags),
725 tx_cmd->supp_rates[1], tx_cmd->supp_rates[0]);
726 }
727
728 static u8 iwl3945_sync_sta(struct iwl_priv *priv, int sta_id, u16 tx_rate)
729 {
730 unsigned long flags_spin;
731 struct iwl_station_entry *station;
732
733 if (sta_id == IWL_INVALID_STATION)
734 return IWL_INVALID_STATION;
735
736 spin_lock_irqsave(&priv->sta_lock, flags_spin);
737 station = &priv->stations[sta_id];
738
739 station->sta.sta.modify_mask = STA_MODIFY_TX_RATE_MSK;
740 station->sta.rate_n_flags = cpu_to_le16(tx_rate);
741 station->sta.mode = STA_CONTROL_MODIFY_MSK;
742 iwl_legacy_send_add_sta(priv, &station->sta, CMD_ASYNC);
743 spin_unlock_irqrestore(&priv->sta_lock, flags_spin);
744
745 IWL_DEBUG_RATE(priv, "SCALE sync station %d to rate %d\n",
746 sta_id, tx_rate);
747 return sta_id;
748 }
749
750 static void iwl3945_set_pwr_vmain(struct iwl_priv *priv)
751 {
752 /*
753 * (for documentation purposes)
754 * to set power to V_AUX, do
755
756 if (pci_pme_capable(priv->pci_dev, PCI_D3cold)) {
757 iwl_legacy_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
758 APMG_PS_CTRL_VAL_PWR_SRC_VAUX,
759 ~APMG_PS_CTRL_MSK_PWR_SRC);
760
761 iwl_poll_bit(priv, CSR_GPIO_IN,
762 CSR_GPIO_IN_VAL_VAUX_PWR_SRC,
763 CSR_GPIO_IN_BIT_AUX_POWER, 5000);
764 }
765 */
766
767 iwl_legacy_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
768 APMG_PS_CTRL_VAL_PWR_SRC_VMAIN,
769 ~APMG_PS_CTRL_MSK_PWR_SRC);
770
771 iwl_poll_bit(priv, CSR_GPIO_IN, CSR_GPIO_IN_VAL_VMAIN_PWR_SRC,
772 CSR_GPIO_IN_BIT_AUX_POWER, 5000); /* uS */
773 }
774
775 static int iwl3945_rx_init(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
776 {
777 iwl_legacy_write_direct32(priv, FH39_RCSR_RBD_BASE(0), rxq->bd_dma);
778 iwl_legacy_write_direct32(priv, FH39_RCSR_RPTR_ADDR(0),
779 rxq->rb_stts_dma);
780 iwl_legacy_write_direct32(priv, FH39_RCSR_WPTR(0), 0);
781 iwl_legacy_write_direct32(priv, FH39_RCSR_CONFIG(0),
782 FH39_RCSR_RX_CONFIG_REG_VAL_DMA_CHNL_EN_ENABLE |
783 FH39_RCSR_RX_CONFIG_REG_VAL_RDRBD_EN_ENABLE |
784 FH39_RCSR_RX_CONFIG_REG_BIT_WR_STTS_EN |
785 FH39_RCSR_RX_CONFIG_REG_VAL_MAX_FRAG_SIZE_128 |
786 (RX_QUEUE_SIZE_LOG << FH39_RCSR_RX_CONFIG_REG_POS_RBDC_SIZE) |
787 FH39_RCSR_RX_CONFIG_REG_VAL_IRQ_DEST_INT_HOST |
788 (1 << FH39_RCSR_RX_CONFIG_REG_POS_IRQ_RBTH) |
789 FH39_RCSR_RX_CONFIG_REG_VAL_MSG_MODE_FH);
790
791 /* fake read to flush all prev I/O */
792 iwl_legacy_read_direct32(priv, FH39_RSSR_CTRL);
793
794 return 0;
795 }
796
797 static int iwl3945_tx_reset(struct iwl_priv *priv)
798 {
799
800 /* bypass mode */
801 iwl_legacy_write_prph(priv, ALM_SCD_MODE_REG, 0x2);
802
803 /* RA 0 is active */
804 iwl_legacy_write_prph(priv, ALM_SCD_ARASTAT_REG, 0x01);
805
806 /* all 6 fifo are active */
807 iwl_legacy_write_prph(priv, ALM_SCD_TXFACT_REG, 0x3f);
808
809 iwl_legacy_write_prph(priv, ALM_SCD_SBYP_MODE_1_REG, 0x010000);
810 iwl_legacy_write_prph(priv, ALM_SCD_SBYP_MODE_2_REG, 0x030002);
811 iwl_legacy_write_prph(priv, ALM_SCD_TXF4MF_REG, 0x000004);
812 iwl_legacy_write_prph(priv, ALM_SCD_TXF5MF_REG, 0x000005);
813
814 iwl_legacy_write_direct32(priv, FH39_TSSR_CBB_BASE,
815 priv->_3945.shared_phys);
816
817 iwl_legacy_write_direct32(priv, FH39_TSSR_MSG_CONFIG,
818 FH39_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TXPD_ON |
819 FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_TXPD_ON |
820 FH39_TSSR_TX_MSG_CONFIG_REG_VAL_MAX_FRAG_SIZE_128B |
821 FH39_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TFD_ON |
822 FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_CBB_ON |
823 FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RSP_WAIT_TH |
824 FH39_TSSR_TX_MSG_CONFIG_REG_VAL_RSP_WAIT_TH);
825
826
827 return 0;
828 }
829
830 /**
831 * iwl3945_txq_ctx_reset - Reset TX queue context
832 *
833 * Destroys all DMA structures and initialize them again
834 */
835 static int iwl3945_txq_ctx_reset(struct iwl_priv *priv)
836 {
837 int rc;
838 int txq_id, slots_num;
839
840 iwl3945_hw_txq_ctx_free(priv);
841
842 /* allocate tx queue structure */
843 rc = iwl_legacy_alloc_txq_mem(priv);
844 if (rc)
845 return rc;
846
847 /* Tx CMD queue */
848 rc = iwl3945_tx_reset(priv);
849 if (rc)
850 goto error;
851
852 /* Tx queue(s) */
853 for (txq_id = 0; txq_id < priv->hw_params.max_txq_num; txq_id++) {
854 slots_num = (txq_id == IWL39_CMD_QUEUE_NUM) ?
855 TFD_CMD_SLOTS : TFD_TX_CMD_SLOTS;
856 rc = iwl_legacy_tx_queue_init(priv, &priv->txq[txq_id],
857 slots_num, txq_id);
858 if (rc) {
859 IWL_ERR(priv, "Tx %d queue init failed\n", txq_id);
860 goto error;
861 }
862 }
863
864 return rc;
865
866 error:
867 iwl3945_hw_txq_ctx_free(priv);
868 return rc;
869 }
870
871
872 /*
873 * Start up 3945's basic functionality after it has been reset
874 * (e.g. after platform boot, or shutdown via iwl_legacy_apm_stop())
875 * NOTE: This does not load uCode nor start the embedded processor
876 */
877 static int iwl3945_apm_init(struct iwl_priv *priv)
878 {
879 int ret = iwl_legacy_apm_init(priv);
880
881 /* Clear APMG (NIC's internal power management) interrupts */
882 iwl_legacy_write_prph(priv, APMG_RTC_INT_MSK_REG, 0x0);
883 iwl_legacy_write_prph(priv, APMG_RTC_INT_STT_REG, 0xFFFFFFFF);
884
885 /* Reset radio chip */
886 iwl_legacy_set_bits_prph(priv, APMG_PS_CTRL_REG,
887 APMG_PS_CTRL_VAL_RESET_REQ);
888 udelay(5);
889 iwl_legacy_clear_bits_prph(priv, APMG_PS_CTRL_REG,
890 APMG_PS_CTRL_VAL_RESET_REQ);
891
892 return ret;
893 }
894
895 static void iwl3945_nic_config(struct iwl_priv *priv)
896 {
897 struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom;
898 unsigned long flags;
899 u8 rev_id = priv->pci_dev->revision;
900
901 spin_lock_irqsave(&priv->lock, flags);
902
903 /* Determine HW type */
904 IWL_DEBUG_INFO(priv, "HW Revision ID = 0x%X\n", rev_id);
905
906 if (rev_id & PCI_CFG_REV_ID_BIT_RTP)
907 IWL_DEBUG_INFO(priv, "RTP type\n");
908 else if (rev_id & PCI_CFG_REV_ID_BIT_BASIC_SKU) {
909 IWL_DEBUG_INFO(priv, "3945 RADIO-MB type\n");
910 iwl_legacy_set_bit(priv, CSR_HW_IF_CONFIG_REG,
911 CSR39_HW_IF_CONFIG_REG_BIT_3945_MB);
912 } else {
913 IWL_DEBUG_INFO(priv, "3945 RADIO-MM type\n");
914 iwl_legacy_set_bit(priv, CSR_HW_IF_CONFIG_REG,
915 CSR39_HW_IF_CONFIG_REG_BIT_3945_MM);
916 }
917
918 if (EEPROM_SKU_CAP_OP_MODE_MRC == eeprom->sku_cap) {
919 IWL_DEBUG_INFO(priv, "SKU OP mode is mrc\n");
920 iwl_legacy_set_bit(priv, CSR_HW_IF_CONFIG_REG,
921 CSR39_HW_IF_CONFIG_REG_BIT_SKU_MRC);
922 } else
923 IWL_DEBUG_INFO(priv, "SKU OP mode is basic\n");
924
925 if ((eeprom->board_revision & 0xF0) == 0xD0) {
926 IWL_DEBUG_INFO(priv, "3945ABG revision is 0x%X\n",
927 eeprom->board_revision);
928 iwl_legacy_set_bit(priv, CSR_HW_IF_CONFIG_REG,
929 CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE);
930 } else {
931 IWL_DEBUG_INFO(priv, "3945ABG revision is 0x%X\n",
932 eeprom->board_revision);
933 iwl_legacy_clear_bit(priv, CSR_HW_IF_CONFIG_REG,
934 CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE);
935 }
936
937 if (eeprom->almgor_m_version <= 1) {
938 iwl_legacy_set_bit(priv, CSR_HW_IF_CONFIG_REG,
939 CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_A);
940 IWL_DEBUG_INFO(priv, "Card M type A version is 0x%X\n",
941 eeprom->almgor_m_version);
942 } else {
943 IWL_DEBUG_INFO(priv, "Card M type B version is 0x%X\n",
944 eeprom->almgor_m_version);
945 iwl_legacy_set_bit(priv, CSR_HW_IF_CONFIG_REG,
946 CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_B);
947 }
948 spin_unlock_irqrestore(&priv->lock, flags);
949
950 if (eeprom->sku_cap & EEPROM_SKU_CAP_SW_RF_KILL_ENABLE)
951 IWL_DEBUG_RF_KILL(priv, "SW RF KILL supported in EEPROM.\n");
952
953 if (eeprom->sku_cap & EEPROM_SKU_CAP_HW_RF_KILL_ENABLE)
954 IWL_DEBUG_RF_KILL(priv, "HW RF KILL supported in EEPROM.\n");
955 }
956
957 int iwl3945_hw_nic_init(struct iwl_priv *priv)
958 {
959 int rc;
960 unsigned long flags;
961 struct iwl_rx_queue *rxq = &priv->rxq;
962
963 spin_lock_irqsave(&priv->lock, flags);
964 priv->cfg->ops->lib->apm_ops.init(priv);
965 spin_unlock_irqrestore(&priv->lock, flags);
966
967 iwl3945_set_pwr_vmain(priv);
968
969 priv->cfg->ops->lib->apm_ops.config(priv);
970
971 /* Allocate the RX queue, or reset if it is already allocated */
972 if (!rxq->bd) {
973 rc = iwl_legacy_rx_queue_alloc(priv);
974 if (rc) {
975 IWL_ERR(priv, "Unable to initialize Rx queue\n");
976 return -ENOMEM;
977 }
978 } else
979 iwl3945_rx_queue_reset(priv, rxq);
980
981 iwl3945_rx_replenish(priv);
982
983 iwl3945_rx_init(priv, rxq);
984
985
986 /* Look at using this instead:
987 rxq->need_update = 1;
988 iwl_legacy_rx_queue_update_write_ptr(priv, rxq);
989 */
990
991 iwl_legacy_write_direct32(priv, FH39_RCSR_WPTR(0), rxq->write & ~7);
992
993 rc = iwl3945_txq_ctx_reset(priv);
994 if (rc)
995 return rc;
996
997 set_bit(STATUS_INIT, &priv->status);
998
999 return 0;
1000 }
1001
1002 /**
1003 * iwl3945_hw_txq_ctx_free - Free TXQ Context
1004 *
1005 * Destroy all TX DMA queues and structures
1006 */
1007 void iwl3945_hw_txq_ctx_free(struct iwl_priv *priv)
1008 {
1009 int txq_id;
1010
1011 /* Tx queues */
1012 if (priv->txq)
1013 for (txq_id = 0; txq_id < priv->hw_params.max_txq_num;
1014 txq_id++)
1015 if (txq_id == IWL39_CMD_QUEUE_NUM)
1016 iwl_legacy_cmd_queue_free(priv);
1017 else
1018 iwl_legacy_tx_queue_free(priv, txq_id);
1019
1020 /* free tx queue structure */
1021 iwl_legacy_txq_mem(priv);
1022 }
1023
1024 void iwl3945_hw_txq_ctx_stop(struct iwl_priv *priv)
1025 {
1026 int txq_id;
1027
1028 /* stop SCD */
1029 iwl_legacy_write_prph(priv, ALM_SCD_MODE_REG, 0);
1030 iwl_legacy_write_prph(priv, ALM_SCD_TXFACT_REG, 0);
1031
1032 /* reset TFD queues */
1033 for (txq_id = 0; txq_id < priv->hw_params.max_txq_num; txq_id++) {
1034 iwl_legacy_write_direct32(priv, FH39_TCSR_CONFIG(txq_id), 0x0);
1035 iwl_poll_direct_bit(priv, FH39_TSSR_TX_STATUS,
1036 FH39_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(txq_id),
1037 1000);
1038 }
1039
1040 iwl3945_hw_txq_ctx_free(priv);
1041 }
1042
1043 /**
1044 * iwl3945_hw_reg_adjust_power_by_temp
1045 * return index delta into power gain settings table
1046 */
1047 static int iwl3945_hw_reg_adjust_power_by_temp(int new_reading, int old_reading)
1048 {
1049 return (new_reading - old_reading) * (-11) / 100;
1050 }
1051
1052 /**
1053 * iwl3945_hw_reg_temp_out_of_range - Keep temperature in sane range
1054 */
1055 static inline int iwl3945_hw_reg_temp_out_of_range(int temperature)
1056 {
1057 return ((temperature < -260) || (temperature > 25)) ? 1 : 0;
1058 }
1059
1060 int iwl3945_hw_get_temperature(struct iwl_priv *priv)
1061 {
1062 return iwl_read32(priv, CSR_UCODE_DRV_GP2);
1063 }
1064
1065 /**
1066 * iwl3945_hw_reg_txpower_get_temperature
1067 * get the current temperature by reading from NIC
1068 */
1069 static int iwl3945_hw_reg_txpower_get_temperature(struct iwl_priv *priv)
1070 {
1071 struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom;
1072 int temperature;
1073
1074 temperature = iwl3945_hw_get_temperature(priv);
1075
1076 /* driver's okay range is -260 to +25.
1077 * human readable okay range is 0 to +285 */
1078 IWL_DEBUG_INFO(priv, "Temperature: %d\n", temperature + IWL_TEMP_CONVERT);
1079
1080 /* handle insane temp reading */
1081 if (iwl3945_hw_reg_temp_out_of_range(temperature)) {
1082 IWL_ERR(priv, "Error bad temperature value %d\n", temperature);
1083
1084 /* if really really hot(?),
1085 * substitute the 3rd band/group's temp measured at factory */
1086 if (priv->last_temperature > 100)
1087 temperature = eeprom->groups[2].temperature;
1088 else /* else use most recent "sane" value from driver */
1089 temperature = priv->last_temperature;
1090 }
1091
1092 return temperature; /* raw, not "human readable" */
1093 }
1094
1095 /* Adjust Txpower only if temperature variance is greater than threshold.
1096 *
1097 * Both are lower than older versions' 9 degrees */
1098 #define IWL_TEMPERATURE_LIMIT_TIMER 6
1099
1100 /**
1101 * iwl3945_is_temp_calib_needed - determines if new calibration is needed
1102 *
1103 * records new temperature in tx_mgr->temperature.
1104 * replaces tx_mgr->last_temperature *only* if calib needed
1105 * (assumes caller will actually do the calibration!). */
1106 static int iwl3945_is_temp_calib_needed(struct iwl_priv *priv)
1107 {
1108 int temp_diff;
1109
1110 priv->temperature = iwl3945_hw_reg_txpower_get_temperature(priv);
1111 temp_diff = priv->temperature - priv->last_temperature;
1112
1113 /* get absolute value */
1114 if (temp_diff < 0) {
1115 IWL_DEBUG_POWER(priv, "Getting cooler, delta %d,\n", temp_diff);
1116 temp_diff = -temp_diff;
1117 } else if (temp_diff == 0)
1118 IWL_DEBUG_POWER(priv, "Same temp,\n");
1119 else
1120 IWL_DEBUG_POWER(priv, "Getting warmer, delta %d,\n", temp_diff);
1121
1122 /* if we don't need calibration, *don't* update last_temperature */
1123 if (temp_diff < IWL_TEMPERATURE_LIMIT_TIMER) {
1124 IWL_DEBUG_POWER(priv, "Timed thermal calib not needed\n");
1125 return 0;
1126 }
1127
1128 IWL_DEBUG_POWER(priv, "Timed thermal calib needed\n");
1129
1130 /* assume that caller will actually do calib ...
1131 * update the "last temperature" value */
1132 priv->last_temperature = priv->temperature;
1133 return 1;
1134 }
1135
1136 #define IWL_MAX_GAIN_ENTRIES 78
1137 #define IWL_CCK_FROM_OFDM_POWER_DIFF -5
1138 #define IWL_CCK_FROM_OFDM_INDEX_DIFF (10)
1139
1140 /* radio and DSP power table, each step is 1/2 dB.
1141 * 1st number is for RF analog gain, 2nd number is for DSP pre-DAC gain. */
1142 static struct iwl3945_tx_power power_gain_table[2][IWL_MAX_GAIN_ENTRIES] = {
1143 {
1144 {251, 127}, /* 2.4 GHz, highest power */
1145 {251, 127},
1146 {251, 127},
1147 {251, 127},
1148 {251, 125},
1149 {251, 110},
1150 {251, 105},
1151 {251, 98},
1152 {187, 125},
1153 {187, 115},
1154 {187, 108},
1155 {187, 99},
1156 {243, 119},
1157 {243, 111},
1158 {243, 105},
1159 {243, 97},
1160 {243, 92},
1161 {211, 106},
1162 {211, 100},
1163 {179, 120},
1164 {179, 113},
1165 {179, 107},
1166 {147, 125},
1167 {147, 119},
1168 {147, 112},
1169 {147, 106},
1170 {147, 101},
1171 {147, 97},
1172 {147, 91},
1173 {115, 107},
1174 {235, 121},
1175 {235, 115},
1176 {235, 109},
1177 {203, 127},
1178 {203, 121},
1179 {203, 115},
1180 {203, 108},
1181 {203, 102},
1182 {203, 96},
1183 {203, 92},
1184 {171, 110},
1185 {171, 104},
1186 {171, 98},
1187 {139, 116},
1188 {227, 125},
1189 {227, 119},
1190 {227, 113},
1191 {227, 107},
1192 {227, 101},
1193 {227, 96},
1194 {195, 113},
1195 {195, 106},
1196 {195, 102},
1197 {195, 95},
1198 {163, 113},
1199 {163, 106},
1200 {163, 102},
1201 {163, 95},
1202 {131, 113},
1203 {131, 106},
1204 {131, 102},
1205 {131, 95},
1206 {99, 113},
1207 {99, 106},
1208 {99, 102},
1209 {99, 95},
1210 {67, 113},
1211 {67, 106},
1212 {67, 102},
1213 {67, 95},
1214 {35, 113},
1215 {35, 106},
1216 {35, 102},
1217 {35, 95},
1218 {3, 113},
1219 {3, 106},
1220 {3, 102},
1221 {3, 95} }, /* 2.4 GHz, lowest power */
1222 {
1223 {251, 127}, /* 5.x GHz, highest power */
1224 {251, 120},
1225 {251, 114},
1226 {219, 119},
1227 {219, 101},
1228 {187, 113},
1229 {187, 102},
1230 {155, 114},
1231 {155, 103},
1232 {123, 117},
1233 {123, 107},
1234 {123, 99},
1235 {123, 92},
1236 {91, 108},
1237 {59, 125},
1238 {59, 118},
1239 {59, 109},
1240 {59, 102},
1241 {59, 96},
1242 {59, 90},
1243 {27, 104},
1244 {27, 98},
1245 {27, 92},
1246 {115, 118},
1247 {115, 111},
1248 {115, 104},
1249 {83, 126},
1250 {83, 121},
1251 {83, 113},
1252 {83, 105},
1253 {83, 99},
1254 {51, 118},
1255 {51, 111},
1256 {51, 104},
1257 {51, 98},
1258 {19, 116},
1259 {19, 109},
1260 {19, 102},
1261 {19, 98},
1262 {19, 93},
1263 {171, 113},
1264 {171, 107},
1265 {171, 99},
1266 {139, 120},
1267 {139, 113},
1268 {139, 107},
1269 {139, 99},
1270 {107, 120},
1271 {107, 113},
1272 {107, 107},
1273 {107, 99},
1274 {75, 120},
1275 {75, 113},
1276 {75, 107},
1277 {75, 99},
1278 {43, 120},
1279 {43, 113},
1280 {43, 107},
1281 {43, 99},
1282 {11, 120},
1283 {11, 113},
1284 {11, 107},
1285 {11, 99},
1286 {131, 107},
1287 {131, 99},
1288 {99, 120},
1289 {99, 113},
1290 {99, 107},
1291 {99, 99},
1292 {67, 120},
1293 {67, 113},
1294 {67, 107},
1295 {67, 99},
1296 {35, 120},
1297 {35, 113},
1298 {35, 107},
1299 {35, 99},
1300 {3, 120} } /* 5.x GHz, lowest power */
1301 };
1302
1303 static inline u8 iwl3945_hw_reg_fix_power_index(int index)
1304 {
1305 if (index < 0)
1306 return 0;
1307 if (index >= IWL_MAX_GAIN_ENTRIES)
1308 return IWL_MAX_GAIN_ENTRIES - 1;
1309 return (u8) index;
1310 }
1311
1312 /* Kick off thermal recalibration check every 60 seconds */
1313 #define REG_RECALIB_PERIOD (60)
1314
1315 /**
1316 * iwl3945_hw_reg_set_scan_power - Set Tx power for scan probe requests
1317 *
1318 * Set (in our channel info database) the direct scan Tx power for 1 Mbit (CCK)
1319 * or 6 Mbit (OFDM) rates.
1320 */
1321 static void iwl3945_hw_reg_set_scan_power(struct iwl_priv *priv, u32 scan_tbl_index,
1322 s32 rate_index, const s8 *clip_pwrs,
1323 struct iwl_channel_info *ch_info,
1324 int band_index)
1325 {
1326 struct iwl3945_scan_power_info *scan_power_info;
1327 s8 power;
1328 u8 power_index;
1329
1330 scan_power_info = &ch_info->scan_pwr_info[scan_tbl_index];
1331
1332 /* use this channel group's 6Mbit clipping/saturation pwr,
1333 * but cap at regulatory scan power restriction (set during init
1334 * based on eeprom channel data) for this channel. */
1335 power = min(ch_info->scan_power, clip_pwrs[IWL_RATE_6M_INDEX_TABLE]);
1336
1337 power = min(power, priv->tx_power_user_lmt);
1338 scan_power_info->requested_power = power;
1339
1340 /* find difference between new scan *power* and current "normal"
1341 * Tx *power* for 6Mb. Use this difference (x2) to adjust the
1342 * current "normal" temperature-compensated Tx power *index* for
1343 * this rate (1Mb or 6Mb) to yield new temp-compensated scan power
1344 * *index*. */
1345 power_index = ch_info->power_info[rate_index].power_table_index
1346 - (power - ch_info->power_info
1347 [IWL_RATE_6M_INDEX_TABLE].requested_power) * 2;
1348
1349 /* store reference index that we use when adjusting *all* scan
1350 * powers. So we can accommodate user (all channel) or spectrum
1351 * management (single channel) power changes "between" temperature
1352 * feedback compensation procedures.
1353 * don't force fit this reference index into gain table; it may be a
1354 * negative number. This will help avoid errors when we're at
1355 * the lower bounds (highest gains, for warmest temperatures)
1356 * of the table. */
1357
1358 /* don't exceed table bounds for "real" setting */
1359 power_index = iwl3945_hw_reg_fix_power_index(power_index);
1360
1361 scan_power_info->power_table_index = power_index;
1362 scan_power_info->tpc.tx_gain =
1363 power_gain_table[band_index][power_index].tx_gain;
1364 scan_power_info->tpc.dsp_atten =
1365 power_gain_table[band_index][power_index].dsp_atten;
1366 }
1367
1368 /**
1369 * iwl3945_send_tx_power - fill in Tx Power command with gain settings
1370 *
1371 * Configures power settings for all rates for the current channel,
1372 * using values from channel info struct, and send to NIC
1373 */
1374 static int iwl3945_send_tx_power(struct iwl_priv *priv)
1375 {
1376 int rate_idx, i;
1377 const struct iwl_channel_info *ch_info = NULL;
1378 struct iwl3945_txpowertable_cmd txpower = {
1379 .channel = priv->contexts[IWL_RXON_CTX_BSS].active.channel,
1380 };
1381 u16 chan;
1382
1383 if (WARN_ONCE(test_bit(STATUS_SCAN_HW, &priv->status),
1384 "TX Power requested while scanning!\n"))
1385 return -EAGAIN;
1386
1387 chan = le16_to_cpu(priv->contexts[IWL_RXON_CTX_BSS].active.channel);
1388
1389 txpower.band = (priv->band == IEEE80211_BAND_5GHZ) ? 0 : 1;
1390 ch_info = iwl_legacy_get_channel_info(priv, priv->band, chan);
1391 if (!ch_info) {
1392 IWL_ERR(priv,
1393 "Failed to get channel info for channel %d [%d]\n",
1394 chan, priv->band);
1395 return -EINVAL;
1396 }
1397
1398 if (!iwl_legacy_is_channel_valid(ch_info)) {
1399 IWL_DEBUG_POWER(priv, "Not calling TX_PWR_TABLE_CMD on "
1400 "non-Tx channel.\n");
1401 return 0;
1402 }
1403
1404 /* fill cmd with power settings for all rates for current channel */
1405 /* Fill OFDM rate */
1406 for (rate_idx = IWL_FIRST_OFDM_RATE, i = 0;
1407 rate_idx <= IWL39_LAST_OFDM_RATE; rate_idx++, i++) {
1408
1409 txpower.power[i].tpc = ch_info->power_info[i].tpc;
1410 txpower.power[i].rate = iwl3945_rates[rate_idx].plcp;
1411
1412 IWL_DEBUG_POWER(priv, "ch %d:%d rf %d dsp %3d rate code 0x%02x\n",
1413 le16_to_cpu(txpower.channel),
1414 txpower.band,
1415 txpower.power[i].tpc.tx_gain,
1416 txpower.power[i].tpc.dsp_atten,
1417 txpower.power[i].rate);
1418 }
1419 /* Fill CCK rates */
1420 for (rate_idx = IWL_FIRST_CCK_RATE;
1421 rate_idx <= IWL_LAST_CCK_RATE; rate_idx++, i++) {
1422 txpower.power[i].tpc = ch_info->power_info[i].tpc;
1423 txpower.power[i].rate = iwl3945_rates[rate_idx].plcp;
1424
1425 IWL_DEBUG_POWER(priv, "ch %d:%d rf %d dsp %3d rate code 0x%02x\n",
1426 le16_to_cpu(txpower.channel),
1427 txpower.band,
1428 txpower.power[i].tpc.tx_gain,
1429 txpower.power[i].tpc.dsp_atten,
1430 txpower.power[i].rate);
1431 }
1432
1433 return iwl_legacy_send_cmd_pdu(priv, REPLY_TX_PWR_TABLE_CMD,
1434 sizeof(struct iwl3945_txpowertable_cmd),
1435 &txpower);
1436
1437 }
1438
1439 /**
1440 * iwl3945_hw_reg_set_new_power - Configures power tables at new levels
1441 * @ch_info: Channel to update. Uses power_info.requested_power.
1442 *
1443 * Replace requested_power and base_power_index ch_info fields for
1444 * one channel.
1445 *
1446 * Called if user or spectrum management changes power preferences.
1447 * Takes into account h/w and modulation limitations (clip power).
1448 *
1449 * This does *not* send anything to NIC, just sets up ch_info for one channel.
1450 *
1451 * NOTE: reg_compensate_for_temperature_dif() *must* be run after this to
1452 * properly fill out the scan powers, and actual h/w gain settings,
1453 * and send changes to NIC
1454 */
1455 static int iwl3945_hw_reg_set_new_power(struct iwl_priv *priv,
1456 struct iwl_channel_info *ch_info)
1457 {
1458 struct iwl3945_channel_power_info *power_info;
1459 int power_changed = 0;
1460 int i;
1461 const s8 *clip_pwrs;
1462 int power;
1463
1464 /* Get this chnlgrp's rate-to-max/clip-powers table */
1465 clip_pwrs = priv->_3945.clip_groups[ch_info->group_index].clip_powers;
1466
1467 /* Get this channel's rate-to-current-power settings table */
1468 power_info = ch_info->power_info;
1469
1470 /* update OFDM Txpower settings */
1471 for (i = IWL_RATE_6M_INDEX_TABLE; i <= IWL_RATE_54M_INDEX_TABLE;
1472 i++, ++power_info) {
1473 int delta_idx;
1474
1475 /* limit new power to be no more than h/w capability */
1476 power = min(ch_info->curr_txpow, clip_pwrs[i]);
1477 if (power == power_info->requested_power)
1478 continue;
1479
1480 /* find difference between old and new requested powers,
1481 * update base (non-temp-compensated) power index */
1482 delta_idx = (power - power_info->requested_power) * 2;
1483 power_info->base_power_index -= delta_idx;
1484
1485 /* save new requested power value */
1486 power_info->requested_power = power;
1487
1488 power_changed = 1;
1489 }
1490
1491 /* update CCK Txpower settings, based on OFDM 12M setting ...
1492 * ... all CCK power settings for a given channel are the *same*. */
1493 if (power_changed) {
1494 power =
1495 ch_info->power_info[IWL_RATE_12M_INDEX_TABLE].
1496 requested_power + IWL_CCK_FROM_OFDM_POWER_DIFF;
1497
1498 /* do all CCK rates' iwl3945_channel_power_info structures */
1499 for (i = IWL_RATE_1M_INDEX_TABLE; i <= IWL_RATE_11M_INDEX_TABLE; i++) {
1500 power_info->requested_power = power;
1501 power_info->base_power_index =
1502 ch_info->power_info[IWL_RATE_12M_INDEX_TABLE].
1503 base_power_index + IWL_CCK_FROM_OFDM_INDEX_DIFF;
1504 ++power_info;
1505 }
1506 }
1507
1508 return 0;
1509 }
1510
1511 /**
1512 * iwl3945_hw_reg_get_ch_txpower_limit - returns new power limit for channel
1513 *
1514 * NOTE: Returned power limit may be less (but not more) than requested,
1515 * based strictly on regulatory (eeprom and spectrum mgt) limitations
1516 * (no consideration for h/w clipping limitations).
1517 */
1518 static int iwl3945_hw_reg_get_ch_txpower_limit(struct iwl_channel_info *ch_info)
1519 {
1520 s8 max_power;
1521
1522 #if 0
1523 /* if we're using TGd limits, use lower of TGd or EEPROM */
1524 if (ch_info->tgd_data.max_power != 0)
1525 max_power = min(ch_info->tgd_data.max_power,
1526 ch_info->eeprom.max_power_avg);
1527
1528 /* else just use EEPROM limits */
1529 else
1530 #endif
1531 max_power = ch_info->eeprom.max_power_avg;
1532
1533 return min(max_power, ch_info->max_power_avg);
1534 }
1535
1536 /**
1537 * iwl3945_hw_reg_comp_txpower_temp - Compensate for temperature
1538 *
1539 * Compensate txpower settings of *all* channels for temperature.
1540 * This only accounts for the difference between current temperature
1541 * and the factory calibration temperatures, and bases the new settings
1542 * on the channel's base_power_index.
1543 *
1544 * If RxOn is "associated", this sends the new Txpower to NIC!
1545 */
1546 static int iwl3945_hw_reg_comp_txpower_temp(struct iwl_priv *priv)
1547 {
1548 struct iwl_channel_info *ch_info = NULL;
1549 struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom;
1550 int delta_index;
1551 const s8 *clip_pwrs; /* array of h/w max power levels for each rate */
1552 u8 a_band;
1553 u8 rate_index;
1554 u8 scan_tbl_index;
1555 u8 i;
1556 int ref_temp;
1557 int temperature = priv->temperature;
1558
1559 if (priv->disable_tx_power_cal ||
1560 test_bit(STATUS_SCANNING, &priv->status)) {
1561 /* do not perform tx power calibration */
1562 return 0;
1563 }
1564 /* set up new Tx power info for each and every channel, 2.4 and 5.x */
1565 for (i = 0; i < priv->channel_count; i++) {
1566 ch_info = &priv->channel_info[i];
1567 a_band = iwl_legacy_is_channel_a_band(ch_info);
1568
1569 /* Get this chnlgrp's factory calibration temperature */
1570 ref_temp = (s16)eeprom->groups[ch_info->group_index].
1571 temperature;
1572
1573 /* get power index adjustment based on current and factory
1574 * temps */
1575 delta_index = iwl3945_hw_reg_adjust_power_by_temp(temperature,
1576 ref_temp);
1577
1578 /* set tx power value for all rates, OFDM and CCK */
1579 for (rate_index = 0; rate_index < IWL_RATE_COUNT_3945;
1580 rate_index++) {
1581 int power_idx =
1582 ch_info->power_info[rate_index].base_power_index;
1583
1584 /* temperature compensate */
1585 power_idx += delta_index;
1586
1587 /* stay within table range */
1588 power_idx = iwl3945_hw_reg_fix_power_index(power_idx);
1589 ch_info->power_info[rate_index].
1590 power_table_index = (u8) power_idx;
1591 ch_info->power_info[rate_index].tpc =
1592 power_gain_table[a_band][power_idx];
1593 }
1594
1595 /* Get this chnlgrp's rate-to-max/clip-powers table */
1596 clip_pwrs = priv->_3945.clip_groups[ch_info->group_index].clip_powers;
1597
1598 /* set scan tx power, 1Mbit for CCK, 6Mbit for OFDM */
1599 for (scan_tbl_index = 0;
1600 scan_tbl_index < IWL_NUM_SCAN_RATES; scan_tbl_index++) {
1601 s32 actual_index = (scan_tbl_index == 0) ?
1602 IWL_RATE_1M_INDEX_TABLE : IWL_RATE_6M_INDEX_TABLE;
1603 iwl3945_hw_reg_set_scan_power(priv, scan_tbl_index,
1604 actual_index, clip_pwrs,
1605 ch_info, a_band);
1606 }
1607 }
1608
1609 /* send Txpower command for current channel to ucode */
1610 return priv->cfg->ops->lib->send_tx_power(priv);
1611 }
1612
1613 int iwl3945_hw_reg_set_txpower(struct iwl_priv *priv, s8 power)
1614 {
1615 struct iwl_channel_info *ch_info;
1616 s8 max_power;
1617 u8 a_band;
1618 u8 i;
1619
1620 if (priv->tx_power_user_lmt == power) {
1621 IWL_DEBUG_POWER(priv, "Requested Tx power same as current "
1622 "limit: %ddBm.\n", power);
1623 return 0;
1624 }
1625
1626 IWL_DEBUG_POWER(priv, "Setting upper limit clamp to %ddBm.\n", power);
1627 priv->tx_power_user_lmt = power;
1628
1629 /* set up new Tx powers for each and every channel, 2.4 and 5.x */
1630
1631 for (i = 0; i < priv->channel_count; i++) {
1632 ch_info = &priv->channel_info[i];
1633 a_band = iwl_legacy_is_channel_a_band(ch_info);
1634
1635 /* find minimum power of all user and regulatory constraints
1636 * (does not consider h/w clipping limitations) */
1637 max_power = iwl3945_hw_reg_get_ch_txpower_limit(ch_info);
1638 max_power = min(power, max_power);
1639 if (max_power != ch_info->curr_txpow) {
1640 ch_info->curr_txpow = max_power;
1641
1642 /* this considers the h/w clipping limitations */
1643 iwl3945_hw_reg_set_new_power(priv, ch_info);
1644 }
1645 }
1646
1647 /* update txpower settings for all channels,
1648 * send to NIC if associated. */
1649 iwl3945_is_temp_calib_needed(priv);
1650 iwl3945_hw_reg_comp_txpower_temp(priv);
1651
1652 return 0;
1653 }
1654
1655 static int iwl3945_send_rxon_assoc(struct iwl_priv *priv,
1656 struct iwl_rxon_context *ctx)
1657 {
1658 int rc = 0;
1659 struct iwl_rx_packet *pkt;
1660 struct iwl3945_rxon_assoc_cmd rxon_assoc;
1661 struct iwl_host_cmd cmd = {
1662 .id = REPLY_RXON_ASSOC,
1663 .len = sizeof(rxon_assoc),
1664 .flags = CMD_WANT_SKB,
1665 .data = &rxon_assoc,
1666 };
1667 const struct iwl_legacy_rxon_cmd *rxon1 = &ctx->staging;
1668 const struct iwl_legacy_rxon_cmd *rxon2 = &ctx->active;
1669
1670 if ((rxon1->flags == rxon2->flags) &&
1671 (rxon1->filter_flags == rxon2->filter_flags) &&
1672 (rxon1->cck_basic_rates == rxon2->cck_basic_rates) &&
1673 (rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates)) {
1674 IWL_DEBUG_INFO(priv, "Using current RXON_ASSOC. Not resending.\n");
1675 return 0;
1676 }
1677
1678 rxon_assoc.flags = ctx->staging.flags;
1679 rxon_assoc.filter_flags = ctx->staging.filter_flags;
1680 rxon_assoc.ofdm_basic_rates = ctx->staging.ofdm_basic_rates;
1681 rxon_assoc.cck_basic_rates = ctx->staging.cck_basic_rates;
1682 rxon_assoc.reserved = 0;
1683
1684 rc = iwl_legacy_send_cmd_sync(priv, &cmd);
1685 if (rc)
1686 return rc;
1687
1688 pkt = (struct iwl_rx_packet *)cmd.reply_page;
1689 if (pkt->hdr.flags & IWL_CMD_FAILED_MSK) {
1690 IWL_ERR(priv, "Bad return from REPLY_RXON_ASSOC command\n");
1691 rc = -EIO;
1692 }
1693
1694 iwl_legacy_free_pages(priv, cmd.reply_page);
1695
1696 return rc;
1697 }
1698
1699 /**
1700 * iwl3945_commit_rxon - commit staging_rxon to hardware
1701 *
1702 * The RXON command in staging_rxon is committed to the hardware and
1703 * the active_rxon structure is updated with the new data. This
1704 * function correctly transitions out of the RXON_ASSOC_MSK state if
1705 * a HW tune is required based on the RXON structure changes.
1706 */
1707 int iwl3945_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
1708 {
1709 /* cast away the const for active_rxon in this function */
1710 struct iwl3945_rxon_cmd *active_rxon = (void *)&ctx->active;
1711 struct iwl3945_rxon_cmd *staging_rxon = (void *)&ctx->staging;
1712 int rc = 0;
1713 bool new_assoc = !!(staging_rxon->filter_flags & RXON_FILTER_ASSOC_MSK);
1714
1715 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
1716 return -EINVAL;
1717
1718 if (!iwl_legacy_is_alive(priv))
1719 return -1;
1720
1721 /* always get timestamp with Rx frame */
1722 staging_rxon->flags |= RXON_FLG_TSF2HOST_MSK;
1723
1724 /* select antenna */
1725 staging_rxon->flags &=
1726 ~(RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_SEL_MSK);
1727 staging_rxon->flags |= iwl3945_get_antenna_flags(priv);
1728
1729 rc = iwl_legacy_check_rxon_cmd(priv, ctx);
1730 if (rc) {
1731 IWL_ERR(priv, "Invalid RXON configuration. Not committing.\n");
1732 return -EINVAL;
1733 }
1734
1735 /* If we don't need to send a full RXON, we can use
1736 * iwl3945_rxon_assoc_cmd which is used to reconfigure filter
1737 * and other flags for the current radio configuration. */
1738 if (!iwl_legacy_full_rxon_required(priv,
1739 &priv->contexts[IWL_RXON_CTX_BSS])) {
1740 rc = iwl_legacy_send_rxon_assoc(priv,
1741 &priv->contexts[IWL_RXON_CTX_BSS]);
1742 if (rc) {
1743 IWL_ERR(priv, "Error setting RXON_ASSOC "
1744 "configuration (%d).\n", rc);
1745 return rc;
1746 }
1747
1748 memcpy(active_rxon, staging_rxon, sizeof(*active_rxon));
1749 /*
1750 * We do not commit tx power settings while channel changing,
1751 * do it now if tx power changed.
1752 */
1753 iwl_legacy_set_tx_power(priv, priv->tx_power_next, false);
1754 return 0;
1755 }
1756
1757 /* If we are currently associated and the new config requires
1758 * an RXON_ASSOC and the new config wants the associated mask enabled,
1759 * we must clear the associated from the active configuration
1760 * before we apply the new config */
1761 if (iwl_legacy_is_associated(priv, IWL_RXON_CTX_BSS) && new_assoc) {
1762 IWL_DEBUG_INFO(priv, "Toggling associated bit on current RXON\n");
1763 active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
1764
1765 /*
1766 * reserved4 and 5 could have been filled by the iwlcore code.
1767 * Let's clear them before pushing to the 3945.
1768 */
1769 active_rxon->reserved4 = 0;
1770 active_rxon->reserved5 = 0;
1771 rc = iwl_legacy_send_cmd_pdu(priv, REPLY_RXON,
1772 sizeof(struct iwl3945_rxon_cmd),
1773 &priv->contexts[IWL_RXON_CTX_BSS].active);
1774
1775 /* If the mask clearing failed then we set
1776 * active_rxon back to what it was previously */
1777 if (rc) {
1778 active_rxon->filter_flags |= RXON_FILTER_ASSOC_MSK;
1779 IWL_ERR(priv, "Error clearing ASSOC_MSK on current "
1780 "configuration (%d).\n", rc);
1781 return rc;
1782 }
1783 iwl_legacy_clear_ucode_stations(priv,
1784 &priv->contexts[IWL_RXON_CTX_BSS]);
1785 iwl_legacy_restore_stations(priv,
1786 &priv->contexts[IWL_RXON_CTX_BSS]);
1787 }
1788
1789 IWL_DEBUG_INFO(priv, "Sending RXON\n"
1790 "* with%s RXON_FILTER_ASSOC_MSK\n"
1791 "* channel = %d\n"
1792 "* bssid = %pM\n",
1793 (new_assoc ? "" : "out"),
1794 le16_to_cpu(staging_rxon->channel),
1795 staging_rxon->bssid_addr);
1796
1797 /*
1798 * reserved4 and 5 could have been filled by the iwlcore code.
1799 * Let's clear them before pushing to the 3945.
1800 */
1801 staging_rxon->reserved4 = 0;
1802 staging_rxon->reserved5 = 0;
1803
1804 iwl_legacy_set_rxon_hwcrypto(priv, ctx, !iwl3945_mod_params.sw_crypto);
1805
1806 /* Apply the new configuration */
1807 rc = iwl_legacy_send_cmd_pdu(priv, REPLY_RXON,
1808 sizeof(struct iwl3945_rxon_cmd),
1809 staging_rxon);
1810 if (rc) {
1811 IWL_ERR(priv, "Error setting new configuration (%d).\n", rc);
1812 return rc;
1813 }
1814
1815 memcpy(active_rxon, staging_rxon, sizeof(*active_rxon));
1816
1817 if (!new_assoc) {
1818 iwl_legacy_clear_ucode_stations(priv,
1819 &priv->contexts[IWL_RXON_CTX_BSS]);
1820 iwl_legacy_restore_stations(priv,
1821 &priv->contexts[IWL_RXON_CTX_BSS]);
1822 }
1823
1824 /* If we issue a new RXON command which required a tune then we must
1825 * send a new TXPOWER command or we won't be able to Tx any frames */
1826 rc = iwl_legacy_set_tx_power(priv, priv->tx_power_next, true);
1827 if (rc) {
1828 IWL_ERR(priv, "Error setting Tx power (%d).\n", rc);
1829 return rc;
1830 }
1831
1832 /* Init the hardware's rate fallback order based on the band */
1833 rc = iwl3945_init_hw_rate_table(priv);
1834 if (rc) {
1835 IWL_ERR(priv, "Error setting HW rate table: %02X\n", rc);
1836 return -EIO;
1837 }
1838
1839 return 0;
1840 }
1841
1842 /**
1843 * iwl3945_reg_txpower_periodic - called when time to check our temperature.
1844 *
1845 * -- reset periodic timer
1846 * -- see if temp has changed enough to warrant re-calibration ... if so:
1847 * -- correct coeffs for temp (can reset temp timer)
1848 * -- save this temp as "last",
1849 * -- send new set of gain settings to NIC
1850 * NOTE: This should continue working, even when we're not associated,
1851 * so we can keep our internal table of scan powers current. */
1852 void iwl3945_reg_txpower_periodic(struct iwl_priv *priv)
1853 {
1854 /* This will kick in the "brute force"
1855 * iwl3945_hw_reg_comp_txpower_temp() below */
1856 if (!iwl3945_is_temp_calib_needed(priv))
1857 goto reschedule;
1858
1859 /* Set up a new set of temp-adjusted TxPowers, send to NIC.
1860 * This is based *only* on current temperature,
1861 * ignoring any previous power measurements */
1862 iwl3945_hw_reg_comp_txpower_temp(priv);
1863
1864 reschedule:
1865 queue_delayed_work(priv->workqueue,
1866 &priv->_3945.thermal_periodic, REG_RECALIB_PERIOD * HZ);
1867 }
1868
1869 static void iwl3945_bg_reg_txpower_periodic(struct work_struct *work)
1870 {
1871 struct iwl_priv *priv = container_of(work, struct iwl_priv,
1872 _3945.thermal_periodic.work);
1873
1874 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
1875 return;
1876
1877 mutex_lock(&priv->mutex);
1878 iwl3945_reg_txpower_periodic(priv);
1879 mutex_unlock(&priv->mutex);
1880 }
1881
1882 /**
1883 * iwl3945_hw_reg_get_ch_grp_index - find the channel-group index (0-4)
1884 * for the channel.
1885 *
1886 * This function is used when initializing channel-info structs.
1887 *
1888 * NOTE: These channel groups do *NOT* match the bands above!
1889 * These channel groups are based on factory-tested channels;
1890 * on A-band, EEPROM's "group frequency" entries represent the top
1891 * channel in each group 1-4. Group 5 All B/G channels are in group 0.
1892 */
1893 static u16 iwl3945_hw_reg_get_ch_grp_index(struct iwl_priv *priv,
1894 const struct iwl_channel_info *ch_info)
1895 {
1896 struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom;
1897 struct iwl3945_eeprom_txpower_group *ch_grp = &eeprom->groups[0];
1898 u8 group;
1899 u16 group_index = 0; /* based on factory calib frequencies */
1900 u8 grp_channel;
1901
1902 /* Find the group index for the channel ... don't use index 1(?) */
1903 if (iwl_legacy_is_channel_a_band(ch_info)) {
1904 for (group = 1; group < 5; group++) {
1905 grp_channel = ch_grp[group].group_channel;
1906 if (ch_info->channel <= grp_channel) {
1907 group_index = group;
1908 break;
1909 }
1910 }
1911 /* group 4 has a few channels *above* its factory cal freq */
1912 if (group == 5)
1913 group_index = 4;
1914 } else
1915 group_index = 0; /* 2.4 GHz, group 0 */
1916
1917 IWL_DEBUG_POWER(priv, "Chnl %d mapped to grp %d\n", ch_info->channel,
1918 group_index);
1919 return group_index;
1920 }
1921
1922 /**
1923 * iwl3945_hw_reg_get_matched_power_index - Interpolate to get nominal index
1924 *
1925 * Interpolate to get nominal (i.e. at factory calibration temperature) index
1926 * into radio/DSP gain settings table for requested power.
1927 */
1928 static int iwl3945_hw_reg_get_matched_power_index(struct iwl_priv *priv,
1929 s8 requested_power,
1930 s32 setting_index, s32 *new_index)
1931 {
1932 const struct iwl3945_eeprom_txpower_group *chnl_grp = NULL;
1933 struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom;
1934 s32 index0, index1;
1935 s32 power = 2 * requested_power;
1936 s32 i;
1937 const struct iwl3945_eeprom_txpower_sample *samples;
1938 s32 gains0, gains1;
1939 s32 res;
1940 s32 denominator;
1941
1942 chnl_grp = &eeprom->groups[setting_index];
1943 samples = chnl_grp->samples;
1944 for (i = 0; i < 5; i++) {
1945 if (power == samples[i].power) {
1946 *new_index = samples[i].gain_index;
1947 return 0;
1948 }
1949 }
1950
1951 if (power > samples[1].power) {
1952 index0 = 0;
1953 index1 = 1;
1954 } else if (power > samples[2].power) {
1955 index0 = 1;
1956 index1 = 2;
1957 } else if (power > samples[3].power) {
1958 index0 = 2;
1959 index1 = 3;
1960 } else {
1961 index0 = 3;
1962 index1 = 4;
1963 }
1964
1965 denominator = (s32) samples[index1].power - (s32) samples[index0].power;
1966 if (denominator == 0)
1967 return -EINVAL;
1968 gains0 = (s32) samples[index0].gain_index * (1 << 19);
1969 gains1 = (s32) samples[index1].gain_index * (1 << 19);
1970 res = gains0 + (gains1 - gains0) *
1971 ((s32) power - (s32) samples[index0].power) / denominator +
1972 (1 << 18);
1973 *new_index = res >> 19;
1974 return 0;
1975 }
1976
1977 static void iwl3945_hw_reg_init_channel_groups(struct iwl_priv *priv)
1978 {
1979 u32 i;
1980 s32 rate_index;
1981 struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom;
1982 const struct iwl3945_eeprom_txpower_group *group;
1983
1984 IWL_DEBUG_POWER(priv, "Initializing factory calib info from EEPROM\n");
1985
1986 for (i = 0; i < IWL_NUM_TX_CALIB_GROUPS; i++) {
1987 s8 *clip_pwrs; /* table of power levels for each rate */
1988 s8 satur_pwr; /* saturation power for each chnl group */
1989 group = &eeprom->groups[i];
1990
1991 /* sanity check on factory saturation power value */
1992 if (group->saturation_power < 40) {
1993 IWL_WARN(priv, "Error: saturation power is %d, "
1994 "less than minimum expected 40\n",
1995 group->saturation_power);
1996 return;
1997 }
1998
1999 /*
2000 * Derive requested power levels for each rate, based on
2001 * hardware capabilities (saturation power for band).
2002 * Basic value is 3dB down from saturation, with further
2003 * power reductions for highest 3 data rates. These
2004 * backoffs provide headroom for high rate modulation
2005 * power peaks, without too much distortion (clipping).
2006 */
2007 /* we'll fill in this array with h/w max power levels */
2008 clip_pwrs = (s8 *) priv->_3945.clip_groups[i].clip_powers;
2009
2010 /* divide factory saturation power by 2 to find -3dB level */
2011 satur_pwr = (s8) (group->saturation_power >> 1);
2012
2013 /* fill in channel group's nominal powers for each rate */
2014 for (rate_index = 0;
2015 rate_index < IWL_RATE_COUNT_3945; rate_index++, clip_pwrs++) {
2016 switch (rate_index) {
2017 case IWL_RATE_36M_INDEX_TABLE:
2018 if (i == 0) /* B/G */
2019 *clip_pwrs = satur_pwr;
2020 else /* A */
2021 *clip_pwrs = satur_pwr - 5;
2022 break;
2023 case IWL_RATE_48M_INDEX_TABLE:
2024 if (i == 0)
2025 *clip_pwrs = satur_pwr - 7;
2026 else
2027 *clip_pwrs = satur_pwr - 10;
2028 break;
2029 case IWL_RATE_54M_INDEX_TABLE:
2030 if (i == 0)
2031 *clip_pwrs = satur_pwr - 9;
2032 else
2033 *clip_pwrs = satur_pwr - 12;
2034 break;
2035 default:
2036 *clip_pwrs = satur_pwr;
2037 break;
2038 }
2039 }
2040 }
2041 }
2042
2043 /**
2044 * iwl3945_txpower_set_from_eeprom - Set channel power info based on EEPROM
2045 *
2046 * Second pass (during init) to set up priv->channel_info
2047 *
2048 * Set up Tx-power settings in our channel info database for each VALID
2049 * (for this geo/SKU) channel, at all Tx data rates, based on eeprom values
2050 * and current temperature.
2051 *
2052 * Since this is based on current temperature (at init time), these values may
2053 * not be valid for very long, but it gives us a starting/default point,
2054 * and allows us to active (i.e. using Tx) scan.
2055 *
2056 * This does *not* write values to NIC, just sets up our internal table.
2057 */
2058 int iwl3945_txpower_set_from_eeprom(struct iwl_priv *priv)
2059 {
2060 struct iwl_channel_info *ch_info = NULL;
2061 struct iwl3945_channel_power_info *pwr_info;
2062 struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom;
2063 int delta_index;
2064 u8 rate_index;
2065 u8 scan_tbl_index;
2066 const s8 *clip_pwrs; /* array of power levels for each rate */
2067 u8 gain, dsp_atten;
2068 s8 power;
2069 u8 pwr_index, base_pwr_index, a_band;
2070 u8 i;
2071 int temperature;
2072
2073 /* save temperature reference,
2074 * so we can determine next time to calibrate */
2075 temperature = iwl3945_hw_reg_txpower_get_temperature(priv);
2076 priv->last_temperature = temperature;
2077
2078 iwl3945_hw_reg_init_channel_groups(priv);
2079
2080 /* initialize Tx power info for each and every channel, 2.4 and 5.x */
2081 for (i = 0, ch_info = priv->channel_info; i < priv->channel_count;
2082 i++, ch_info++) {
2083 a_band = iwl_legacy_is_channel_a_band(ch_info);
2084 if (!iwl_legacy_is_channel_valid(ch_info))
2085 continue;
2086
2087 /* find this channel's channel group (*not* "band") index */
2088 ch_info->group_index =
2089 iwl3945_hw_reg_get_ch_grp_index(priv, ch_info);
2090
2091 /* Get this chnlgrp's rate->max/clip-powers table */
2092 clip_pwrs = priv->_3945.clip_groups[ch_info->group_index].clip_powers;
2093
2094 /* calculate power index *adjustment* value according to
2095 * diff between current temperature and factory temperature */
2096 delta_index = iwl3945_hw_reg_adjust_power_by_temp(temperature,
2097 eeprom->groups[ch_info->group_index].
2098 temperature);
2099
2100 IWL_DEBUG_POWER(priv, "Delta index for channel %d: %d [%d]\n",
2101 ch_info->channel, delta_index, temperature +
2102 IWL_TEMP_CONVERT);
2103
2104 /* set tx power value for all OFDM rates */
2105 for (rate_index = 0; rate_index < IWL_OFDM_RATES;
2106 rate_index++) {
2107 s32 uninitialized_var(power_idx);
2108 int rc;
2109
2110 /* use channel group's clip-power table,
2111 * but don't exceed channel's max power */
2112 s8 pwr = min(ch_info->max_power_avg,
2113 clip_pwrs[rate_index]);
2114
2115 pwr_info = &ch_info->power_info[rate_index];
2116
2117 /* get base (i.e. at factory-measured temperature)
2118 * power table index for this rate's power */
2119 rc = iwl3945_hw_reg_get_matched_power_index(priv, pwr,
2120 ch_info->group_index,
2121 &power_idx);
2122 if (rc) {
2123 IWL_ERR(priv, "Invalid power index\n");
2124 return rc;
2125 }
2126 pwr_info->base_power_index = (u8) power_idx;
2127
2128 /* temperature compensate */
2129 power_idx += delta_index;
2130
2131 /* stay within range of gain table */
2132 power_idx = iwl3945_hw_reg_fix_power_index(power_idx);
2133
2134 /* fill 1 OFDM rate's iwl3945_channel_power_info struct */
2135 pwr_info->requested_power = pwr;
2136 pwr_info->power_table_index = (u8) power_idx;
2137 pwr_info->tpc.tx_gain =
2138 power_gain_table[a_band][power_idx].tx_gain;
2139 pwr_info->tpc.dsp_atten =
2140 power_gain_table[a_band][power_idx].dsp_atten;
2141 }
2142
2143 /* set tx power for CCK rates, based on OFDM 12 Mbit settings*/
2144 pwr_info = &ch_info->power_info[IWL_RATE_12M_INDEX_TABLE];
2145 power = pwr_info->requested_power +
2146 IWL_CCK_FROM_OFDM_POWER_DIFF;
2147 pwr_index = pwr_info->power_table_index +
2148 IWL_CCK_FROM_OFDM_INDEX_DIFF;
2149 base_pwr_index = pwr_info->base_power_index +
2150 IWL_CCK_FROM_OFDM_INDEX_DIFF;
2151
2152 /* stay within table range */
2153 pwr_index = iwl3945_hw_reg_fix_power_index(pwr_index);
2154 gain = power_gain_table[a_band][pwr_index].tx_gain;
2155 dsp_atten = power_gain_table[a_band][pwr_index].dsp_atten;
2156
2157 /* fill each CCK rate's iwl3945_channel_power_info structure
2158 * NOTE: All CCK-rate Txpwrs are the same for a given chnl!
2159 * NOTE: CCK rates start at end of OFDM rates! */
2160 for (rate_index = 0;
2161 rate_index < IWL_CCK_RATES; rate_index++) {
2162 pwr_info = &ch_info->power_info[rate_index+IWL_OFDM_RATES];
2163 pwr_info->requested_power = power;
2164 pwr_info->power_table_index = pwr_index;
2165 pwr_info->base_power_index = base_pwr_index;
2166 pwr_info->tpc.tx_gain = gain;
2167 pwr_info->tpc.dsp_atten = dsp_atten;
2168 }
2169
2170 /* set scan tx power, 1Mbit for CCK, 6Mbit for OFDM */
2171 for (scan_tbl_index = 0;
2172 scan_tbl_index < IWL_NUM_SCAN_RATES; scan_tbl_index++) {
2173 s32 actual_index = (scan_tbl_index == 0) ?
2174 IWL_RATE_1M_INDEX_TABLE : IWL_RATE_6M_INDEX_TABLE;
2175 iwl3945_hw_reg_set_scan_power(priv, scan_tbl_index,
2176 actual_index, clip_pwrs, ch_info, a_band);
2177 }
2178 }
2179
2180 return 0;
2181 }
2182
2183 int iwl3945_hw_rxq_stop(struct iwl_priv *priv)
2184 {
2185 int rc;
2186
2187 iwl_legacy_write_direct32(priv, FH39_RCSR_CONFIG(0), 0);
2188 rc = iwl_poll_direct_bit(priv, FH39_RSSR_STATUS,
2189 FH39_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, 1000);
2190 if (rc < 0)
2191 IWL_ERR(priv, "Can't stop Rx DMA.\n");
2192
2193 return 0;
2194 }
2195
2196 int iwl3945_hw_tx_queue_init(struct iwl_priv *priv, struct iwl_tx_queue *txq)
2197 {
2198 int txq_id = txq->q.id;
2199
2200 struct iwl3945_shared *shared_data = priv->_3945.shared_virt;
2201
2202 shared_data->tx_base_ptr[txq_id] = cpu_to_le32((u32)txq->q.dma_addr);
2203
2204 iwl_legacy_write_direct32(priv, FH39_CBCC_CTRL(txq_id), 0);
2205 iwl_legacy_write_direct32(priv, FH39_CBCC_BASE(txq_id), 0);
2206
2207 iwl_legacy_write_direct32(priv, FH39_TCSR_CONFIG(txq_id),
2208 FH39_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_NOINT |
2209 FH39_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_TXF |
2210 FH39_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_IFTFD |
2211 FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL |
2212 FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE);
2213
2214 /* fake read to flush all prev. writes */
2215 iwl_read32(priv, FH39_TSSR_CBB_BASE);
2216
2217 return 0;
2218 }
2219
2220 /*
2221 * HCMD utils
2222 */
2223 static u16 iwl3945_get_hcmd_size(u8 cmd_id, u16 len)
2224 {
2225 switch (cmd_id) {
2226 case REPLY_RXON:
2227 return sizeof(struct iwl3945_rxon_cmd);
2228 case POWER_TABLE_CMD:
2229 return sizeof(struct iwl3945_powertable_cmd);
2230 default:
2231 return len;
2232 }
2233 }
2234
2235
2236 static u16 iwl3945_build_addsta_hcmd(const struct iwl_legacy_addsta_cmd *cmd,
2237 u8 *data)
2238 {
2239 struct iwl3945_addsta_cmd *addsta = (struct iwl3945_addsta_cmd *)data;
2240 addsta->mode = cmd->mode;
2241 memcpy(&addsta->sta, &cmd->sta, sizeof(struct sta_id_modify));
2242 memcpy(&addsta->key, &cmd->key, sizeof(struct iwl4965_keyinfo));
2243 addsta->station_flags = cmd->station_flags;
2244 addsta->station_flags_msk = cmd->station_flags_msk;
2245 addsta->tid_disable_tx = cpu_to_le16(0);
2246 addsta->rate_n_flags = cmd->rate_n_flags;
2247 addsta->add_immediate_ba_tid = cmd->add_immediate_ba_tid;
2248 addsta->remove_immediate_ba_tid = cmd->remove_immediate_ba_tid;
2249 addsta->add_immediate_ba_ssn = cmd->add_immediate_ba_ssn;
2250
2251 return (u16)sizeof(struct iwl3945_addsta_cmd);
2252 }
2253
2254 static int iwl3945_add_bssid_station(struct iwl_priv *priv,
2255 const u8 *addr, u8 *sta_id_r)
2256 {
2257 struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
2258 int ret;
2259 u8 sta_id;
2260 unsigned long flags;
2261
2262 if (sta_id_r)
2263 *sta_id_r = IWL_INVALID_STATION;
2264
2265 ret = iwl_legacy_add_station_common(priv, ctx, addr, 0, NULL, &sta_id);
2266 if (ret) {
2267 IWL_ERR(priv, "Unable to add station %pM\n", addr);
2268 return ret;
2269 }
2270
2271 if (sta_id_r)
2272 *sta_id_r = sta_id;
2273
2274 spin_lock_irqsave(&priv->sta_lock, flags);
2275 priv->stations[sta_id].used |= IWL_STA_LOCAL;
2276 spin_unlock_irqrestore(&priv->sta_lock, flags);
2277
2278 return 0;
2279 }
2280 static int iwl3945_manage_ibss_station(struct iwl_priv *priv,
2281 struct ieee80211_vif *vif, bool add)
2282 {
2283 struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
2284 int ret;
2285
2286 if (add) {
2287 ret = iwl3945_add_bssid_station(priv, vif->bss_conf.bssid,
2288 &vif_priv->ibss_bssid_sta_id);
2289 if (ret)
2290 return ret;
2291
2292 iwl3945_sync_sta(priv, vif_priv->ibss_bssid_sta_id,
2293 (priv->band == IEEE80211_BAND_5GHZ) ?
2294 IWL_RATE_6M_PLCP : IWL_RATE_1M_PLCP);
2295 iwl3945_rate_scale_init(priv->hw, vif_priv->ibss_bssid_sta_id);
2296
2297 return 0;
2298 }
2299
2300 return iwl_legacy_remove_station(priv, vif_priv->ibss_bssid_sta_id,
2301 vif->bss_conf.bssid);
2302 }
2303
2304 /**
2305 * iwl3945_init_hw_rate_table - Initialize the hardware rate fallback table
2306 */
2307 int iwl3945_init_hw_rate_table(struct iwl_priv *priv)
2308 {
2309 int rc, i, index, prev_index;
2310 struct iwl3945_rate_scaling_cmd rate_cmd = {
2311 .reserved = {0, 0, 0},
2312 };
2313 struct iwl3945_rate_scaling_info *table = rate_cmd.table;
2314
2315 for (i = 0; i < ARRAY_SIZE(iwl3945_rates); i++) {
2316 index = iwl3945_rates[i].table_rs_index;
2317
2318 table[index].rate_n_flags =
2319 iwl3945_hw_set_rate_n_flags(iwl3945_rates[i].plcp, 0);
2320 table[index].try_cnt = priv->retry_rate;
2321 prev_index = iwl3945_get_prev_ieee_rate(i);
2322 table[index].next_rate_index =
2323 iwl3945_rates[prev_index].table_rs_index;
2324 }
2325
2326 switch (priv->band) {
2327 case IEEE80211_BAND_5GHZ:
2328 IWL_DEBUG_RATE(priv, "Select A mode rate scale\n");
2329 /* If one of the following CCK rates is used,
2330 * have it fall back to the 6M OFDM rate */
2331 for (i = IWL_RATE_1M_INDEX_TABLE;
2332 i <= IWL_RATE_11M_INDEX_TABLE; i++)
2333 table[i].next_rate_index =
2334 iwl3945_rates[IWL_FIRST_OFDM_RATE].table_rs_index;
2335
2336 /* Don't fall back to CCK rates */
2337 table[IWL_RATE_12M_INDEX_TABLE].next_rate_index =
2338 IWL_RATE_9M_INDEX_TABLE;
2339
2340 /* Don't drop out of OFDM rates */
2341 table[IWL_RATE_6M_INDEX_TABLE].next_rate_index =
2342 iwl3945_rates[IWL_FIRST_OFDM_RATE].table_rs_index;
2343 break;
2344
2345 case IEEE80211_BAND_2GHZ:
2346 IWL_DEBUG_RATE(priv, "Select B/G mode rate scale\n");
2347 /* If an OFDM rate is used, have it fall back to the
2348 * 1M CCK rates */
2349
2350 if (!(priv->_3945.sta_supp_rates & IWL_OFDM_RATES_MASK) &&
2351 iwl_legacy_is_associated(priv, IWL_RXON_CTX_BSS)) {
2352
2353 index = IWL_FIRST_CCK_RATE;
2354 for (i = IWL_RATE_6M_INDEX_TABLE;
2355 i <= IWL_RATE_54M_INDEX_TABLE; i++)
2356 table[i].next_rate_index =
2357 iwl3945_rates[index].table_rs_index;
2358
2359 index = IWL_RATE_11M_INDEX_TABLE;
2360 /* CCK shouldn't fall back to OFDM... */
2361 table[index].next_rate_index = IWL_RATE_5M_INDEX_TABLE;
2362 }
2363 break;
2364
2365 default:
2366 WARN_ON(1);
2367 break;
2368 }
2369
2370 /* Update the rate scaling for control frame Tx */
2371 rate_cmd.table_id = 0;
2372 rc = iwl_legacy_send_cmd_pdu(priv, REPLY_RATE_SCALE, sizeof(rate_cmd),
2373 &rate_cmd);
2374 if (rc)
2375 return rc;
2376
2377 /* Update the rate scaling for data frame Tx */
2378 rate_cmd.table_id = 1;
2379 return iwl_legacy_send_cmd_pdu(priv, REPLY_RATE_SCALE, sizeof(rate_cmd),
2380 &rate_cmd);
2381 }
2382
2383 /* Called when initializing driver */
2384 int iwl3945_hw_set_hw_params(struct iwl_priv *priv)
2385 {
2386 memset((void *)&priv->hw_params, 0,
2387 sizeof(struct iwl_hw_params));
2388
2389 priv->_3945.shared_virt =
2390 dma_alloc_coherent(&priv->pci_dev->dev,
2391 sizeof(struct iwl3945_shared),
2392 &priv->_3945.shared_phys, GFP_KERNEL);
2393 if (!priv->_3945.shared_virt) {
2394 IWL_ERR(priv, "failed to allocate pci memory\n");
2395 return -ENOMEM;
2396 }
2397
2398 /* Assign number of Usable TX queues */
2399 priv->hw_params.max_txq_num = priv->cfg->base_params->num_of_queues;
2400
2401 priv->hw_params.tfd_size = sizeof(struct iwl3945_tfd);
2402 priv->hw_params.rx_page_order = get_order(IWL_RX_BUF_SIZE_3K);
2403 priv->hw_params.max_rxq_size = RX_QUEUE_SIZE;
2404 priv->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG;
2405 priv->hw_params.max_stations = IWL3945_STATION_COUNT;
2406 priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id = IWL3945_BROADCAST_ID;
2407
2408 priv->sta_key_max_num = STA_KEY_MAX_NUM;
2409
2410 priv->hw_params.rx_wrt_ptr_reg = FH39_RSCSR_CHNL0_WPTR;
2411 priv->hw_params.max_beacon_itrvl = IWL39_MAX_UCODE_BEACON_INTERVAL;
2412 priv->hw_params.beacon_time_tsf_bits = IWL3945_EXT_BEACON_TIME_POS;
2413
2414 return 0;
2415 }
2416
2417 unsigned int iwl3945_hw_get_beacon_cmd(struct iwl_priv *priv,
2418 struct iwl3945_frame *frame, u8 rate)
2419 {
2420 struct iwl3945_tx_beacon_cmd *tx_beacon_cmd;
2421 unsigned int frame_size;
2422
2423 tx_beacon_cmd = (struct iwl3945_tx_beacon_cmd *)&frame->u;
2424 memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd));
2425
2426 tx_beacon_cmd->tx.sta_id =
2427 priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id;
2428 tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
2429
2430 frame_size = iwl3945_fill_beacon_frame(priv,
2431 tx_beacon_cmd->frame,
2432 sizeof(frame->u) - sizeof(*tx_beacon_cmd));
2433
2434 BUG_ON(frame_size > MAX_MPDU_SIZE);
2435 tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size);
2436
2437 tx_beacon_cmd->tx.rate = rate;
2438 tx_beacon_cmd->tx.tx_flags = (TX_CMD_FLG_SEQ_CTL_MSK |
2439 TX_CMD_FLG_TSF_MSK);
2440
2441 /* supp_rates[0] == OFDM start at IWL_FIRST_OFDM_RATE*/
2442 tx_beacon_cmd->tx.supp_rates[0] =
2443 (IWL_OFDM_BASIC_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF;
2444
2445 tx_beacon_cmd->tx.supp_rates[1] =
2446 (IWL_CCK_BASIC_RATES_MASK & 0xF);
2447
2448 return sizeof(struct iwl3945_tx_beacon_cmd) + frame_size;
2449 }
2450
2451 void iwl3945_hw_rx_handler_setup(struct iwl_priv *priv)
2452 {
2453 priv->rx_handlers[REPLY_TX] = iwl3945_rx_reply_tx;
2454 priv->rx_handlers[REPLY_3945_RX] = iwl3945_rx_reply_rx;
2455 }
2456
2457 void iwl3945_hw_setup_deferred_work(struct iwl_priv *priv)
2458 {
2459 INIT_DELAYED_WORK(&priv->_3945.thermal_periodic,
2460 iwl3945_bg_reg_txpower_periodic);
2461 }
2462
2463 void iwl3945_hw_cancel_deferred_work(struct iwl_priv *priv)
2464 {
2465 cancel_delayed_work(&priv->_3945.thermal_periodic);
2466 }
2467
2468 /* check contents of special bootstrap uCode SRAM */
2469 static int iwl3945_verify_bsm(struct iwl_priv *priv)
2470 {
2471 __le32 *image = priv->ucode_boot.v_addr;
2472 u32 len = priv->ucode_boot.len;
2473 u32 reg;
2474 u32 val;
2475
2476 IWL_DEBUG_INFO(priv, "Begin verify bsm\n");
2477
2478 /* verify BSM SRAM contents */
2479 val = iwl_legacy_read_prph(priv, BSM_WR_DWCOUNT_REG);
2480 for (reg = BSM_SRAM_LOWER_BOUND;
2481 reg < BSM_SRAM_LOWER_BOUND + len;
2482 reg += sizeof(u32), image++) {
2483 val = iwl_legacy_read_prph(priv, reg);
2484 if (val != le32_to_cpu(*image)) {
2485 IWL_ERR(priv, "BSM uCode verification failed at "
2486 "addr 0x%08X+%u (of %u), is 0x%x, s/b 0x%x\n",
2487 BSM_SRAM_LOWER_BOUND,
2488 reg - BSM_SRAM_LOWER_BOUND, len,
2489 val, le32_to_cpu(*image));
2490 return -EIO;
2491 }
2492 }
2493
2494 IWL_DEBUG_INFO(priv, "BSM bootstrap uCode image OK\n");
2495
2496 return 0;
2497 }
2498
2499
2500 /******************************************************************************
2501 *
2502 * EEPROM related functions
2503 *
2504 ******************************************************************************/
2505
2506 /*
2507 * Clear the OWNER_MSK, to establish driver (instead of uCode running on
2508 * embedded controller) as EEPROM reader; each read is a series of pulses
2509 * to/from the EEPROM chip, not a single event, so even reads could conflict
2510 * if they weren't arbitrated by some ownership mechanism. Here, the driver
2511 * simply claims ownership, which should be safe when this function is called
2512 * (i.e. before loading uCode!).
2513 */
2514 static int iwl3945_eeprom_acquire_semaphore(struct iwl_priv *priv)
2515 {
2516 _iwl_legacy_clear_bit(priv, CSR_EEPROM_GP, CSR_EEPROM_GP_IF_OWNER_MSK);
2517 return 0;
2518 }
2519
2520
2521 static void iwl3945_eeprom_release_semaphore(struct iwl_priv *priv)
2522 {
2523 return;
2524 }
2525
2526 /**
2527 * iwl3945_load_bsm - Load bootstrap instructions
2528 *
2529 * BSM operation:
2530 *
2531 * The Bootstrap State Machine (BSM) stores a short bootstrap uCode program
2532 * in special SRAM that does not power down during RFKILL. When powering back
2533 * up after power-saving sleeps (or during initial uCode load), the BSM loads
2534 * the bootstrap program into the on-board processor, and starts it.
2535 *
2536 * The bootstrap program loads (via DMA) instructions and data for a new
2537 * program from host DRAM locations indicated by the host driver in the
2538 * BSM_DRAM_* registers. Once the new program is loaded, it starts
2539 * automatically.
2540 *
2541 * When initializing the NIC, the host driver points the BSM to the
2542 * "initialize" uCode image. This uCode sets up some internal data, then
2543 * notifies host via "initialize alive" that it is complete.
2544 *
2545 * The host then replaces the BSM_DRAM_* pointer values to point to the
2546 * normal runtime uCode instructions and a backup uCode data cache buffer
2547 * (filled initially with starting data values for the on-board processor),
2548 * then triggers the "initialize" uCode to load and launch the runtime uCode,
2549 * which begins normal operation.
2550 *
2551 * When doing a power-save shutdown, runtime uCode saves data SRAM into
2552 * the backup data cache in DRAM before SRAM is powered down.
2553 *
2554 * When powering back up, the BSM loads the bootstrap program. This reloads
2555 * the runtime uCode instructions and the backup data cache into SRAM,
2556 * and re-launches the runtime uCode from where it left off.
2557 */
2558 static int iwl3945_load_bsm(struct iwl_priv *priv)
2559 {
2560 __le32 *image = priv->ucode_boot.v_addr;
2561 u32 len = priv->ucode_boot.len;
2562 dma_addr_t pinst;
2563 dma_addr_t pdata;
2564 u32 inst_len;
2565 u32 data_len;
2566 int rc;
2567 int i;
2568 u32 done;
2569 u32 reg_offset;
2570
2571 IWL_DEBUG_INFO(priv, "Begin load bsm\n");
2572
2573 /* make sure bootstrap program is no larger than BSM's SRAM size */
2574 if (len > IWL39_MAX_BSM_SIZE)
2575 return -EINVAL;
2576
2577 /* Tell bootstrap uCode where to find the "Initialize" uCode
2578 * in host DRAM ... host DRAM physical address bits 31:0 for 3945.
2579 * NOTE: iwl3945_initialize_alive_start() will replace these values,
2580 * after the "initialize" uCode has run, to point to
2581 * runtime/protocol instructions and backup data cache. */
2582 pinst = priv->ucode_init.p_addr;
2583 pdata = priv->ucode_init_data.p_addr;
2584 inst_len = priv->ucode_init.len;
2585 data_len = priv->ucode_init_data.len;
2586
2587 iwl_legacy_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst);
2588 iwl_legacy_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata);
2589 iwl_legacy_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG, inst_len);
2590 iwl_legacy_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG, data_len);
2591
2592 /* Fill BSM memory with bootstrap instructions */
2593 for (reg_offset = BSM_SRAM_LOWER_BOUND;
2594 reg_offset < BSM_SRAM_LOWER_BOUND + len;
2595 reg_offset += sizeof(u32), image++)
2596 _iwl_legacy_write_prph(priv, reg_offset,
2597 le32_to_cpu(*image));
2598
2599 rc = iwl3945_verify_bsm(priv);
2600 if (rc)
2601 return rc;
2602
2603 /* Tell BSM to copy from BSM SRAM into instruction SRAM, when asked */
2604 iwl_legacy_write_prph(priv, BSM_WR_MEM_SRC_REG, 0x0);
2605 iwl_legacy_write_prph(priv, BSM_WR_MEM_DST_REG,
2606 IWL39_RTC_INST_LOWER_BOUND);
2607 iwl_legacy_write_prph(priv, BSM_WR_DWCOUNT_REG, len / sizeof(u32));
2608
2609 /* Load bootstrap code into instruction SRAM now,
2610 * to prepare to load "initialize" uCode */
2611 iwl_legacy_write_prph(priv, BSM_WR_CTRL_REG,
2612 BSM_WR_CTRL_REG_BIT_START);
2613
2614 /* Wait for load of bootstrap uCode to finish */
2615 for (i = 0; i < 100; i++) {
2616 done = iwl_legacy_read_prph(priv, BSM_WR_CTRL_REG);
2617 if (!(done & BSM_WR_CTRL_REG_BIT_START))
2618 break;
2619 udelay(10);
2620 }
2621 if (i < 100)
2622 IWL_DEBUG_INFO(priv, "BSM write complete, poll %d iterations\n", i);
2623 else {
2624 IWL_ERR(priv, "BSM write did not complete!\n");
2625 return -EIO;
2626 }
2627
2628 /* Enable future boot loads whenever power management unit triggers it
2629 * (e.g. when powering back up after power-save shutdown) */
2630 iwl_legacy_write_prph(priv, BSM_WR_CTRL_REG,
2631 BSM_WR_CTRL_REG_BIT_START_EN);
2632
2633 return 0;
2634 }
2635
2636 static struct iwl_hcmd_ops iwl3945_hcmd = {
2637 .rxon_assoc = iwl3945_send_rxon_assoc,
2638 .commit_rxon = iwl3945_commit_rxon,
2639 };
2640
2641 static struct iwl_lib_ops iwl3945_lib = {
2642 .txq_attach_buf_to_tfd = iwl3945_hw_txq_attach_buf_to_tfd,
2643 .txq_free_tfd = iwl3945_hw_txq_free_tfd,
2644 .txq_init = iwl3945_hw_tx_queue_init,
2645 .load_ucode = iwl3945_load_bsm,
2646 .dump_nic_error_log = iwl3945_dump_nic_error_log,
2647 .apm_ops = {
2648 .init = iwl3945_apm_init,
2649 .config = iwl3945_nic_config,
2650 },
2651 .eeprom_ops = {
2652 .regulatory_bands = {
2653 EEPROM_REGULATORY_BAND_1_CHANNELS,
2654 EEPROM_REGULATORY_BAND_2_CHANNELS,
2655 EEPROM_REGULATORY_BAND_3_CHANNELS,
2656 EEPROM_REGULATORY_BAND_4_CHANNELS,
2657 EEPROM_REGULATORY_BAND_5_CHANNELS,
2658 EEPROM_REGULATORY_BAND_NO_HT40,
2659 EEPROM_REGULATORY_BAND_NO_HT40,
2660 },
2661 .acquire_semaphore = iwl3945_eeprom_acquire_semaphore,
2662 .release_semaphore = iwl3945_eeprom_release_semaphore,
2663 },
2664 .send_tx_power = iwl3945_send_tx_power,
2665 .is_valid_rtc_data_addr = iwl3945_hw_valid_rtc_data_addr,
2666
2667 .debugfs_ops = {
2668 .rx_stats_read = iwl3945_ucode_rx_stats_read,
2669 .tx_stats_read = iwl3945_ucode_tx_stats_read,
2670 .general_stats_read = iwl3945_ucode_general_stats_read,
2671 },
2672 };
2673
2674 static const struct iwl_legacy_ops iwl3945_legacy_ops = {
2675 .post_associate = iwl3945_post_associate,
2676 .config_ap = iwl3945_config_ap,
2677 .manage_ibss_station = iwl3945_manage_ibss_station,
2678 };
2679
2680 static struct iwl_hcmd_utils_ops iwl3945_hcmd_utils = {
2681 .get_hcmd_size = iwl3945_get_hcmd_size,
2682 .build_addsta_hcmd = iwl3945_build_addsta_hcmd,
2683 .request_scan = iwl3945_request_scan,
2684 .post_scan = iwl3945_post_scan,
2685 };
2686
2687 static const struct iwl_ops iwl3945_ops = {
2688 .lib = &iwl3945_lib,
2689 .hcmd = &iwl3945_hcmd,
2690 .utils = &iwl3945_hcmd_utils,
2691 .led = &iwl3945_led_ops,
2692 .legacy = &iwl3945_legacy_ops,
2693 .ieee80211_ops = &iwl3945_hw_ops,
2694 };
2695
2696 static struct iwl_base_params iwl3945_base_params = {
2697 .eeprom_size = IWL3945_EEPROM_IMG_SIZE,
2698 .num_of_queues = IWL39_NUM_QUEUES,
2699 .pll_cfg_val = CSR39_ANA_PLL_CFG_VAL,
2700 .set_l0s = false,
2701 .use_bsm = true,
2702 .led_compensation = 64,
2703 .wd_timeout = IWL_DEF_WD_TIMEOUT,
2704 };
2705
2706 static struct iwl_cfg iwl3945_bg_cfg = {
2707 .name = "3945BG",
2708 .fw_name_pre = IWL3945_FW_PRE,
2709 .ucode_api_max = IWL3945_UCODE_API_MAX,
2710 .ucode_api_min = IWL3945_UCODE_API_MIN,
2711 .sku = IWL_SKU_G,
2712 .eeprom_ver = EEPROM_3945_EEPROM_VERSION,
2713 .ops = &iwl3945_ops,
2714 .mod_params = &iwl3945_mod_params,
2715 .base_params = &iwl3945_base_params,
2716 .led_mode = IWL_LED_BLINK,
2717 };
2718
2719 static struct iwl_cfg iwl3945_abg_cfg = {
2720 .name = "3945ABG",
2721 .fw_name_pre = IWL3945_FW_PRE,
2722 .ucode_api_max = IWL3945_UCODE_API_MAX,
2723 .ucode_api_min = IWL3945_UCODE_API_MIN,
2724 .sku = IWL_SKU_A|IWL_SKU_G,
2725 .eeprom_ver = EEPROM_3945_EEPROM_VERSION,
2726 .ops = &iwl3945_ops,
2727 .mod_params = &iwl3945_mod_params,
2728 .base_params = &iwl3945_base_params,
2729 .led_mode = IWL_LED_BLINK,
2730 };
2731
2732 DEFINE_PCI_DEVICE_TABLE(iwl3945_hw_card_ids) = {
2733 {IWL_PCI_DEVICE(0x4222, 0x1005, iwl3945_bg_cfg)},
2734 {IWL_PCI_DEVICE(0x4222, 0x1034, iwl3945_bg_cfg)},
2735 {IWL_PCI_DEVICE(0x4222, 0x1044, iwl3945_bg_cfg)},
2736 {IWL_PCI_DEVICE(0x4227, 0x1014, iwl3945_bg_cfg)},
2737 {IWL_PCI_DEVICE(0x4222, PCI_ANY_ID, iwl3945_abg_cfg)},
2738 {IWL_PCI_DEVICE(0x4227, PCI_ANY_ID, iwl3945_abg_cfg)},
2739 {0}
2740 };
2741
2742 MODULE_DEVICE_TABLE(pci, iwl3945_hw_card_ids);
Linux kernel - Deliverables
This page took 0.231793 seconds and 4 git commands to generate.