iwlwifi: eliminate the possible 1/2 dBm tx power loss in 6x00 & 6x50 series
[deliverable/linux.git] / drivers / net / wireless / iwlwifi / iwl-dev.h
1 /******************************************************************************
2 *
3 * Copyright(c) 2003 - 2009 Intel Corporation. All rights reserved.
4 *
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of version 2 of the GNU General Public License as
7 * published by the Free Software Foundation.
8 *
9 * This program is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
12 * more details.
13 *
14 * You should have received a copy of the GNU General Public License along with
15 * this program; if not, write to the Free Software Foundation, Inc.,
16 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
17 *
18 * The full GNU General Public License is included in this distribution in the
19 * file called LICENSE.
20 *
21 * Contact Information:
22 * Intel Linux Wireless <ilw@linux.intel.com>
23 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
24 *
25 *****************************************************************************/
26 /*
27 * Please use this file (iwl-dev.h) for driver implementation definitions.
28 * Please use iwl-commands.h for uCode API definitions.
29 * Please use iwl-4965-hw.h for hardware-related definitions.
30 */
31
32 #ifndef __iwl_dev_h__
33 #define __iwl_dev_h__
34
35 #include <linux/pci.h> /* for struct pci_device_id */
36 #include <linux/kernel.h>
37 #include <net/ieee80211_radiotap.h>
38
39 #include "iwl-eeprom.h"
40 #include "iwl-csr.h"
41 #include "iwl-prph.h"
42 #include "iwl-fh.h"
43 #include "iwl-debug.h"
44 #include "iwl-4965-hw.h"
45 #include "iwl-3945-hw.h"
46 #include "iwl-led.h"
47 #include "iwl-power.h"
48 #include "iwl-agn-rs.h"
49
50 /* configuration for the iwl4965 */
51 extern struct iwl_cfg iwl4965_agn_cfg;
52 extern struct iwl_cfg iwl5300_agn_cfg;
53 extern struct iwl_cfg iwl5100_agn_cfg;
54 extern struct iwl_cfg iwl5350_agn_cfg;
55 extern struct iwl_cfg iwl5100_bg_cfg;
56 extern struct iwl_cfg iwl5100_abg_cfg;
57 extern struct iwl_cfg iwl5150_agn_cfg;
58 extern struct iwl_cfg iwl6000i_2agn_cfg;
59 extern struct iwl_cfg iwl6000i_2abg_cfg;
60 extern struct iwl_cfg iwl6000i_2bg_cfg;
61 extern struct iwl_cfg iwl6000_3agn_cfg;
62 extern struct iwl_cfg iwl6050_2agn_cfg;
63 extern struct iwl_cfg iwl6050_2abg_cfg;
64 extern struct iwl_cfg iwl1000_bgn_cfg;
65 extern struct iwl_cfg iwl1000_bg_cfg;
66
67 struct iwl_tx_queue;
68
69 /* shared structures from iwl-5000.c */
70 extern struct iwl_mod_params iwl50_mod_params;
71 extern struct iwl_ucode_ops iwl5000_ucode;
72 extern struct iwl_lib_ops iwl5000_lib;
73 extern struct iwl_hcmd_ops iwl5000_hcmd;
74 extern struct iwl_hcmd_utils_ops iwl5000_hcmd_utils;
75
76 /* shared functions from iwl-5000.c */
77 extern u16 iwl5000_get_hcmd_size(u8 cmd_id, u16 len);
78 extern u16 iwl5000_build_addsta_hcmd(const struct iwl_addsta_cmd *cmd,
79 u8 *data);
80 extern void iwl5000_rts_tx_cmd_flag(struct ieee80211_tx_info *info,
81 __le32 *tx_flags);
82 extern int iwl5000_calc_rssi(struct iwl_priv *priv,
83 struct iwl_rx_phy_res *rx_resp);
84 extern void iwl5000_nic_config(struct iwl_priv *priv);
85 extern u16 iwl5000_eeprom_calib_version(struct iwl_priv *priv);
86 extern const u8 *iwl5000_eeprom_query_addr(const struct iwl_priv *priv,
87 size_t offset);
88 extern void iwl5000_txq_update_byte_cnt_tbl(struct iwl_priv *priv,
89 struct iwl_tx_queue *txq,
90 u16 byte_cnt);
91 extern void iwl5000_txq_inval_byte_cnt_tbl(struct iwl_priv *priv,
92 struct iwl_tx_queue *txq);
93 extern int iwl5000_load_ucode(struct iwl_priv *priv);
94 extern void iwl5000_init_alive_start(struct iwl_priv *priv);
95 extern int iwl5000_alive_notify(struct iwl_priv *priv);
96 extern int iwl5000_hw_set_hw_params(struct iwl_priv *priv);
97 extern int iwl5000_txq_agg_enable(struct iwl_priv *priv, int txq_id,
98 int tx_fifo, int sta_id, int tid, u16 ssn_idx);
99 extern int iwl5000_txq_agg_disable(struct iwl_priv *priv, u16 txq_id,
100 u16 ssn_idx, u8 tx_fifo);
101 extern void iwl5000_txq_set_sched(struct iwl_priv *priv, u32 mask);
102 extern void iwl5000_setup_deferred_work(struct iwl_priv *priv);
103 extern void iwl5000_rx_handler_setup(struct iwl_priv *priv);
104 extern int iwl5000_hw_valid_rtc_data_addr(u32 addr);
105 extern int iwl5000_send_tx_power(struct iwl_priv *priv);
106 extern void iwl5000_temperature(struct iwl_priv *priv);
107
108 /* CT-KILL constants */
109 #define CT_KILL_THRESHOLD_LEGACY 110 /* in Celsius */
110 #define CT_KILL_THRESHOLD 114 /* in Celsius */
111 #define CT_KILL_EXIT_THRESHOLD 95 /* in Celsius */
112
113 /* Default noise level to report when noise measurement is not available.
114 * This may be because we're:
115 * 1) Not associated (4965, no beacon statistics being sent to driver)
116 * 2) Scanning (noise measurement does not apply to associated channel)
117 * 3) Receiving CCK (3945 delivers noise info only for OFDM frames)
118 * Use default noise value of -127 ... this is below the range of measurable
119 * Rx dBm for either 3945 or 4965, so it can indicate "unmeasurable" to user.
120 * Also, -127 works better than 0 when averaging frames with/without
121 * noise info (e.g. averaging might be done in app); measured dBm values are
122 * always negative ... using a negative value as the default keeps all
123 * averages within an s8's (used in some apps) range of negative values. */
124 #define IWL_NOISE_MEAS_NOT_AVAILABLE (-127)
125
126 /*
127 * RTS threshold here is total size [2347] minus 4 FCS bytes
128 * Per spec:
129 * a value of 0 means RTS on all data/management packets
130 * a value > max MSDU size means no RTS
131 * else RTS for data/management frames where MPDU is larger
132 * than RTS value.
133 */
134 #define DEFAULT_RTS_THRESHOLD 2347U
135 #define MIN_RTS_THRESHOLD 0U
136 #define MAX_RTS_THRESHOLD 2347U
137 #define MAX_MSDU_SIZE 2304U
138 #define MAX_MPDU_SIZE 2346U
139 #define DEFAULT_BEACON_INTERVAL 100U
140 #define DEFAULT_SHORT_RETRY_LIMIT 7U
141 #define DEFAULT_LONG_RETRY_LIMIT 4U
142
143 struct iwl_rx_mem_buffer {
144 dma_addr_t page_dma;
145 struct page *page;
146 struct list_head list;
147 };
148
149 #define rxb_addr(r) page_address(r->page)
150
151 /* defined below */
152 struct iwl_device_cmd;
153
154 struct iwl_cmd_meta {
155 /* only for SYNC commands, iff the reply skb is wanted */
156 struct iwl_host_cmd *source;
157 /*
158 * only for ASYNC commands
159 * (which is somewhat stupid -- look at iwl-sta.c for instance
160 * which duplicates a bunch of code because the callback isn't
161 * invoked for SYNC commands, if it were and its result passed
162 * through it would be simpler...)
163 */
164 void (*callback)(struct iwl_priv *priv,
165 struct iwl_device_cmd *cmd,
166 struct iwl_rx_packet *pkt);
167
168 /* The CMD_SIZE_HUGE flag bit indicates that the command
169 * structure is stored at the end of the shared queue memory. */
170 u32 flags;
171
172 DECLARE_PCI_UNMAP_ADDR(mapping)
173 DECLARE_PCI_UNMAP_LEN(len)
174 };
175
176 /*
177 * Generic queue structure
178 *
179 * Contains common data for Rx and Tx queues
180 */
181 struct iwl_queue {
182 int n_bd; /* number of BDs in this queue */
183 int write_ptr; /* 1-st empty entry (index) host_w*/
184 int read_ptr; /* last used entry (index) host_r*/
185 dma_addr_t dma_addr; /* physical addr for BD's */
186 int n_window; /* safe queue window */
187 u32 id;
188 int low_mark; /* low watermark, resume queue if free
189 * space more than this */
190 int high_mark; /* high watermark, stop queue if free
191 * space less than this */
192 } __attribute__ ((packed));
193
194 /* One for each TFD */
195 struct iwl_tx_info {
196 struct sk_buff *skb[IWL_NUM_OF_TBS - 1];
197 };
198
199 /**
200 * struct iwl_tx_queue - Tx Queue for DMA
201 * @q: generic Rx/Tx queue descriptor
202 * @bd: base of circular buffer of TFDs
203 * @cmd: array of command/TX buffer pointers
204 * @meta: array of meta data for each command/tx buffer
205 * @dma_addr_cmd: physical address of cmd/tx buffer array
206 * @txb: array of per-TFD driver data
207 * @need_update: indicates need to update read/write index
208 * @sched_retry: indicates queue is high-throughput aggregation (HT AGG) enabled
209 *
210 * A Tx queue consists of circular buffer of BDs (a.k.a. TFDs, transmit frame
211 * descriptors) and required locking structures.
212 */
213 #define TFD_TX_CMD_SLOTS 256
214 #define TFD_CMD_SLOTS 32
215
216 struct iwl_tx_queue {
217 struct iwl_queue q;
218 void *tfds;
219 struct iwl_device_cmd **cmd;
220 struct iwl_cmd_meta *meta;
221 struct iwl_tx_info *txb;
222 u8 need_update;
223 u8 sched_retry;
224 u8 active;
225 u8 swq_id;
226 };
227
228 #define IWL_NUM_SCAN_RATES (2)
229
230 struct iwl4965_channel_tgd_info {
231 u8 type;
232 s8 max_power;
233 };
234
235 struct iwl4965_channel_tgh_info {
236 s64 last_radar_time;
237 };
238
239 #define IWL4965_MAX_RATE (33)
240
241 struct iwl3945_clip_group {
242 /* maximum power level to prevent clipping for each rate, derived by
243 * us from this band's saturation power in EEPROM */
244 const s8 clip_powers[IWL_MAX_RATES];
245 };
246
247 /* current Tx power values to use, one for each rate for each channel.
248 * requested power is limited by:
249 * -- regulatory EEPROM limits for this channel
250 * -- hardware capabilities (clip-powers)
251 * -- spectrum management
252 * -- user preference (e.g. iwconfig)
253 * when requested power is set, base power index must also be set. */
254 struct iwl3945_channel_power_info {
255 struct iwl3945_tx_power tpc; /* actual radio and DSP gain settings */
256 s8 power_table_index; /* actual (compenst'd) index into gain table */
257 s8 base_power_index; /* gain index for power at factory temp. */
258 s8 requested_power; /* power (dBm) requested for this chnl/rate */
259 };
260
261 /* current scan Tx power values to use, one for each scan rate for each
262 * channel. */
263 struct iwl3945_scan_power_info {
264 struct iwl3945_tx_power tpc; /* actual radio and DSP gain settings */
265 s8 power_table_index; /* actual (compenst'd) index into gain table */
266 s8 requested_power; /* scan pwr (dBm) requested for chnl/rate */
267 };
268
269 /*
270 * One for each channel, holds all channel setup data
271 * Some of the fields (e.g. eeprom and flags/max_power_avg) are redundant
272 * with one another!
273 */
274 struct iwl_channel_info {
275 struct iwl4965_channel_tgd_info tgd;
276 struct iwl4965_channel_tgh_info tgh;
277 struct iwl_eeprom_channel eeprom; /* EEPROM regulatory limit */
278 struct iwl_eeprom_channel ht40_eeprom; /* EEPROM regulatory limit for
279 * HT40 channel */
280
281 u8 channel; /* channel number */
282 u8 flags; /* flags copied from EEPROM */
283 s8 max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */
284 s8 curr_txpow; /* (dBm) regulatory/spectrum/user (not h/w) limit */
285 s8 min_power; /* always 0 */
286 s8 scan_power; /* (dBm) regul. eeprom, direct scans, any rate */
287
288 u8 group_index; /* 0-4, maps channel to group1/2/3/4/5 */
289 u8 band_index; /* 0-4, maps channel to band1/2/3/4/5 */
290 enum ieee80211_band band;
291
292 /* HT40 channel info */
293 s8 ht40_max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */
294 u8 ht40_flags; /* flags copied from EEPROM */
295 u8 ht40_extension_channel; /* HT_IE_EXT_CHANNEL_* */
296
297 /* Radio/DSP gain settings for each "normal" data Tx rate.
298 * These include, in addition to RF and DSP gain, a few fields for
299 * remembering/modifying gain settings (indexes). */
300 struct iwl3945_channel_power_info power_info[IWL4965_MAX_RATE];
301
302 /* Radio/DSP gain settings for each scan rate, for directed scans. */
303 struct iwl3945_scan_power_info scan_pwr_info[IWL_NUM_SCAN_RATES];
304 };
305
306 #define IWL_TX_FIFO_AC0 0
307 #define IWL_TX_FIFO_AC1 1
308 #define IWL_TX_FIFO_AC2 2
309 #define IWL_TX_FIFO_AC3 3
310 #define IWL_TX_FIFO_HCCA_1 5
311 #define IWL_TX_FIFO_HCCA_2 6
312 #define IWL_TX_FIFO_NONE 7
313
314 /* Minimum number of queues. MAX_NUM is defined in hw specific files.
315 * Set the minimum to accommodate the 4 standard TX queues, 1 command
316 * queue, 2 (unused) HCCA queues, and 4 HT queues (one for each AC) */
317 #define IWL_MIN_NUM_QUEUES 10
318
319 /*
320 * Queue #4 is the command queue for 3945/4965/5x00/1000/6x00,
321 * the driver maps it into the appropriate device FIFO for the
322 * uCode.
323 */
324 #define IWL_CMD_QUEUE_NUM 4
325
326 /* Power management (not Tx power) structures */
327
328 enum iwl_pwr_src {
329 IWL_PWR_SRC_VMAIN,
330 IWL_PWR_SRC_VAUX,
331 };
332
333 #define IEEE80211_DATA_LEN 2304
334 #define IEEE80211_4ADDR_LEN 30
335 #define IEEE80211_HLEN (IEEE80211_4ADDR_LEN)
336 #define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN)
337
338 struct iwl_frame {
339 union {
340 struct ieee80211_hdr frame;
341 struct iwl_tx_beacon_cmd beacon;
342 u8 raw[IEEE80211_FRAME_LEN];
343 u8 cmd[360];
344 } u;
345 struct list_head list;
346 };
347
348 #define SEQ_TO_SN(seq) (((seq) & IEEE80211_SCTL_SEQ) >> 4)
349 #define SN_TO_SEQ(ssn) (((ssn) << 4) & IEEE80211_SCTL_SEQ)
350 #define MAX_SN ((IEEE80211_SCTL_SEQ) >> 4)
351
352 enum {
353 CMD_SYNC = 0,
354 CMD_SIZE_NORMAL = 0,
355 CMD_NO_SKB = 0,
356 CMD_SIZE_HUGE = (1 << 0),
357 CMD_ASYNC = (1 << 1),
358 CMD_WANT_SKB = (1 << 2),
359 };
360
361 #define DEF_CMD_PAYLOAD_SIZE 320
362
363 /*
364 * IWL_LINK_HDR_MAX should include ieee80211_hdr, radiotap header,
365 * SNAP header and alignment. It should also be big enough for 802.11
366 * control frames.
367 */
368 #define IWL_LINK_HDR_MAX 64
369
370 /**
371 * struct iwl_device_cmd
372 *
373 * For allocation of the command and tx queues, this establishes the overall
374 * size of the largest command we send to uCode, except for a scan command
375 * (which is relatively huge; space is allocated separately).
376 */
377 struct iwl_device_cmd {
378 struct iwl_cmd_header hdr; /* uCode API */
379 union {
380 u32 flags;
381 u8 val8;
382 u16 val16;
383 u32 val32;
384 struct iwl_tx_cmd tx;
385 struct iwl6000_channel_switch_cmd chswitch;
386 u8 payload[DEF_CMD_PAYLOAD_SIZE];
387 } __attribute__ ((packed)) cmd;
388 } __attribute__ ((packed));
389
390 #define TFD_MAX_PAYLOAD_SIZE (sizeof(struct iwl_device_cmd))
391
392
393 struct iwl_host_cmd {
394 const void *data;
395 unsigned long reply_page;
396 void (*callback)(struct iwl_priv *priv,
397 struct iwl_device_cmd *cmd,
398 struct iwl_rx_packet *pkt);
399 u32 flags;
400 u16 len;
401 u8 id;
402 };
403
404 #define SUP_RATE_11A_MAX_NUM_CHANNELS 8
405 #define SUP_RATE_11B_MAX_NUM_CHANNELS 4
406 #define SUP_RATE_11G_MAX_NUM_CHANNELS 12
407
408 /**
409 * struct iwl_rx_queue - Rx queue
410 * @bd: driver's pointer to buffer of receive buffer descriptors (rbd)
411 * @dma_addr: bus address of buffer of receive buffer descriptors (rbd)
412 * @read: Shared index to newest available Rx buffer
413 * @write: Shared index to oldest written Rx packet
414 * @free_count: Number of pre-allocated buffers in rx_free
415 * @rx_free: list of free SKBs for use
416 * @rx_used: List of Rx buffers with no SKB
417 * @need_update: flag to indicate we need to update read/write index
418 * @rb_stts: driver's pointer to receive buffer status
419 * @rb_stts_dma: bus address of receive buffer status
420 *
421 * NOTE: rx_free and rx_used are used as a FIFO for iwl_rx_mem_buffers
422 */
423 struct iwl_rx_queue {
424 __le32 *bd;
425 dma_addr_t dma_addr;
426 struct iwl_rx_mem_buffer pool[RX_QUEUE_SIZE + RX_FREE_BUFFERS];
427 struct iwl_rx_mem_buffer *queue[RX_QUEUE_SIZE];
428 u32 read;
429 u32 write;
430 u32 free_count;
431 u32 write_actual;
432 struct list_head rx_free;
433 struct list_head rx_used;
434 int need_update;
435 struct iwl_rb_status *rb_stts;
436 dma_addr_t rb_stts_dma;
437 spinlock_t lock;
438 };
439
440 #define IWL_SUPPORTED_RATES_IE_LEN 8
441
442 #define MAX_TID_COUNT 9
443
444 #define IWL_INVALID_RATE 0xFF
445 #define IWL_INVALID_VALUE -1
446
447 /**
448 * struct iwl_ht_agg -- aggregation status while waiting for block-ack
449 * @txq_id: Tx queue used for Tx attempt
450 * @frame_count: # frames attempted by Tx command
451 * @wait_for_ba: Expect block-ack before next Tx reply
452 * @start_idx: Index of 1st Transmit Frame Descriptor (TFD) in Tx window
453 * @bitmap0: Low order bitmap, one bit for each frame pending ACK in Tx window
454 * @bitmap1: High order, one bit for each frame pending ACK in Tx window
455 * @rate_n_flags: Rate at which Tx was attempted
456 *
457 * If REPLY_TX indicates that aggregation was attempted, driver must wait
458 * for block ack (REPLY_COMPRESSED_BA). This struct stores tx reply info
459 * until block ack arrives.
460 */
461 struct iwl_ht_agg {
462 u16 txq_id;
463 u16 frame_count;
464 u16 wait_for_ba;
465 u16 start_idx;
466 u64 bitmap;
467 u32 rate_n_flags;
468 #define IWL_AGG_OFF 0
469 #define IWL_AGG_ON 1
470 #define IWL_EMPTYING_HW_QUEUE_ADDBA 2
471 #define IWL_EMPTYING_HW_QUEUE_DELBA 3
472 u8 state;
473 };
474
475
476 struct iwl_tid_data {
477 u16 seq_number;
478 u16 tfds_in_queue;
479 struct iwl_ht_agg agg;
480 };
481
482 struct iwl_hw_key {
483 enum ieee80211_key_alg alg;
484 int keylen;
485 u8 keyidx;
486 u8 key[32];
487 };
488
489 union iwl_ht_rate_supp {
490 u16 rates;
491 struct {
492 u8 siso_rate;
493 u8 mimo_rate;
494 };
495 };
496
497 #define CFG_HT_RX_AMPDU_FACTOR_DEF (0x3)
498
499 /*
500 * Maximal MPDU density for TX aggregation
501 * 4 - 2us density
502 * 5 - 4us density
503 * 6 - 8us density
504 * 7 - 16us density
505 */
506 #define CFG_HT_MPDU_DENSITY_4USEC (0x5)
507 #define CFG_HT_MPDU_DENSITY_DEF CFG_HT_MPDU_DENSITY_4USEC
508
509 struct iwl_ht_config {
510 /* self configuration data */
511 bool is_ht;
512 bool is_40mhz;
513 bool single_chain_sufficient;
514 u8 sm_ps;
515 /* BSS related data */
516 u8 extension_chan_offset;
517 u8 ht_protection;
518 u8 non_GF_STA_present;
519 };
520
521 union iwl_qos_capabity {
522 struct {
523 u8 edca_count:4; /* bit 0-3 */
524 u8 q_ack:1; /* bit 4 */
525 u8 queue_request:1; /* bit 5 */
526 u8 txop_request:1; /* bit 6 */
527 u8 reserved:1; /* bit 7 */
528 } q_AP;
529 struct {
530 u8 acvo_APSD:1; /* bit 0 */
531 u8 acvi_APSD:1; /* bit 1 */
532 u8 ac_bk_APSD:1; /* bit 2 */
533 u8 ac_be_APSD:1; /* bit 3 */
534 u8 q_ack:1; /* bit 4 */
535 u8 max_len:2; /* bit 5-6 */
536 u8 more_data_ack:1; /* bit 7 */
537 } q_STA;
538 u8 val;
539 };
540
541 /* QoS structures */
542 struct iwl_qos_info {
543 int qos_active;
544 union iwl_qos_capabity qos_cap;
545 struct iwl_qosparam_cmd def_qos_parm;
546 };
547
548 #define STA_PS_STATUS_WAKE 0
549 #define STA_PS_STATUS_SLEEP 1
550
551
552 struct iwl3945_station_entry {
553 struct iwl3945_addsta_cmd sta;
554 struct iwl_tid_data tid[MAX_TID_COUNT];
555 u8 used;
556 u8 ps_status;
557 struct iwl_hw_key keyinfo;
558 };
559
560 struct iwl_station_entry {
561 struct iwl_addsta_cmd sta;
562 struct iwl_tid_data tid[MAX_TID_COUNT];
563 u8 used;
564 u8 ps_status;
565 struct iwl_hw_key keyinfo;
566 };
567
568 /*
569 * iwl_station_priv: Driver's private station information
570 *
571 * When mac80211 creates a station it reserves some space (hw->sta_data_size)
572 * in the structure for use by driver. This structure is places in that
573 * space.
574 *
575 * At the moment use it for the station's rate scaling information.
576 */
577 struct iwl_station_priv {
578 struct iwl_lq_sta lq_sta;
579 };
580
581 /* one for each uCode image (inst/data, boot/init/runtime) */
582 struct fw_desc {
583 void *v_addr; /* access by driver */
584 dma_addr_t p_addr; /* access by card's busmaster DMA */
585 u32 len; /* bytes */
586 };
587
588 /* uCode file layout */
589 struct iwl_ucode_header {
590 __le32 ver; /* major/minor/API/serial */
591 union {
592 struct {
593 __le32 inst_size; /* bytes of runtime code */
594 __le32 data_size; /* bytes of runtime data */
595 __le32 init_size; /* bytes of init code */
596 __le32 init_data_size; /* bytes of init data */
597 __le32 boot_size; /* bytes of bootstrap code */
598 u8 data[0]; /* in same order as sizes */
599 } v1;
600 struct {
601 __le32 build; /* build number */
602 __le32 inst_size; /* bytes of runtime code */
603 __le32 data_size; /* bytes of runtime data */
604 __le32 init_size; /* bytes of init code */
605 __le32 init_data_size; /* bytes of init data */
606 __le32 boot_size; /* bytes of bootstrap code */
607 u8 data[0]; /* in same order as sizes */
608 } v2;
609 } u;
610 };
611 #define UCODE_HEADER_SIZE(ver) ((ver) == 1 ? 24 : 28)
612
613 struct iwl4965_ibss_seq {
614 u8 mac[ETH_ALEN];
615 u16 seq_num;
616 u16 frag_num;
617 unsigned long packet_time;
618 struct list_head list;
619 };
620
621 struct iwl_sensitivity_ranges {
622 u16 min_nrg_cck;
623 u16 max_nrg_cck;
624
625 u16 nrg_th_cck;
626 u16 nrg_th_ofdm;
627
628 u16 auto_corr_min_ofdm;
629 u16 auto_corr_min_ofdm_mrc;
630 u16 auto_corr_min_ofdm_x1;
631 u16 auto_corr_min_ofdm_mrc_x1;
632
633 u16 auto_corr_max_ofdm;
634 u16 auto_corr_max_ofdm_mrc;
635 u16 auto_corr_max_ofdm_x1;
636 u16 auto_corr_max_ofdm_mrc_x1;
637
638 u16 auto_corr_max_cck;
639 u16 auto_corr_max_cck_mrc;
640 u16 auto_corr_min_cck;
641 u16 auto_corr_min_cck_mrc;
642
643 u16 barker_corr_th_min;
644 u16 barker_corr_th_min_mrc;
645 u16 nrg_th_cca;
646 };
647
648
649 #define KELVIN_TO_CELSIUS(x) ((x)-273)
650 #define CELSIUS_TO_KELVIN(x) ((x)+273)
651
652
653 /**
654 * struct iwl_hw_params
655 * @max_txq_num: Max # Tx queues supported
656 * @dma_chnl_num: Number of Tx DMA/FIFO channels
657 * @scd_bc_tbls_size: size of scheduler byte count tables
658 * @tfd_size: TFD size
659 * @tx/rx_chains_num: Number of TX/RX chains
660 * @valid_tx/rx_ant: usable antennas
661 * @max_rxq_size: Max # Rx frames in Rx queue (must be power-of-2)
662 * @max_rxq_log: Log-base-2 of max_rxq_size
663 * @rx_page_order: Rx buffer page order
664 * @rx_wrt_ptr_reg: FH{39}_RSCSR_CHNL0_WPTR
665 * @max_stations:
666 * @bcast_sta_id:
667 * @ht40_channel: is 40MHz width possible in band 2.4
668 * BIT(IEEE80211_BAND_5GHZ) BIT(IEEE80211_BAND_5GHZ)
669 * @sw_crypto: 0 for hw, 1 for sw
670 * @max_xxx_size: for ucode uses
671 * @ct_kill_threshold: temperature threshold
672 * @calib_init_cfg: setup initial calibrations for the hw
673 * @struct iwl_sensitivity_ranges: range of sensitivity values
674 */
675 struct iwl_hw_params {
676 u8 max_txq_num;
677 u8 dma_chnl_num;
678 u16 scd_bc_tbls_size;
679 u32 tfd_size;
680 u8 tx_chains_num;
681 u8 rx_chains_num;
682 u8 valid_tx_ant;
683 u8 valid_rx_ant;
684 u16 max_rxq_size;
685 u16 max_rxq_log;
686 u32 rx_page_order;
687 u32 rx_wrt_ptr_reg;
688 u8 max_stations;
689 u8 bcast_sta_id;
690 u8 ht40_channel;
691 u8 max_beacon_itrvl; /* in 1024 ms */
692 u32 max_inst_size;
693 u32 max_data_size;
694 u32 max_bsm_size;
695 u32 ct_kill_threshold; /* value in hw-dependent units */
696 u32 ct_kill_exit_threshold; /* value in hw-dependent units */
697 /* for 1000, 6000 series and up */
698 u32 calib_init_cfg;
699 const struct iwl_sensitivity_ranges *sens;
700 };
701
702
703 /******************************************************************************
704 *
705 * Functions implemented in core module which are forward declared here
706 * for use by iwl-[4-5].c
707 *
708 * NOTE: The implementation of these functions are not hardware specific
709 * which is why they are in the core module files.
710 *
711 * Naming convention --
712 * iwl_ <-- Is part of iwlwifi
713 * iwlXXXX_ <-- Hardware specific (implemented in iwl-XXXX.c for XXXX)
714 * iwl4965_bg_ <-- Called from work queue context
715 * iwl4965_mac_ <-- mac80211 callback
716 *
717 ****************************************************************************/
718 extern void iwl_update_chain_flags(struct iwl_priv *priv);
719 extern int iwl_set_pwr_src(struct iwl_priv *priv, enum iwl_pwr_src src);
720 extern const u8 iwl_bcast_addr[ETH_ALEN];
721 extern int iwl_rxq_stop(struct iwl_priv *priv);
722 extern void iwl_txq_ctx_stop(struct iwl_priv *priv);
723 extern int iwl_queue_space(const struct iwl_queue *q);
724 static inline int iwl_queue_used(const struct iwl_queue *q, int i)
725 {
726 return q->write_ptr > q->read_ptr ?
727 (i >= q->read_ptr && i < q->write_ptr) :
728 !(i < q->read_ptr && i >= q->write_ptr);
729 }
730
731
732 static inline u8 get_cmd_index(struct iwl_queue *q, u32 index, int is_huge)
733 {
734 /*
735 * This is for init calibration result and scan command which
736 * required buffer > TFD_MAX_PAYLOAD_SIZE,
737 * the big buffer at end of command array
738 */
739 if (is_huge)
740 return q->n_window; /* must be power of 2 */
741
742 /* Otherwise, use normal size buffers */
743 return index & (q->n_window - 1);
744 }
745
746
747 struct iwl_dma_ptr {
748 dma_addr_t dma;
749 void *addr;
750 size_t size;
751 };
752
753 #define IWL_OPERATION_MODE_AUTO 0
754 #define IWL_OPERATION_MODE_HT_ONLY 1
755 #define IWL_OPERATION_MODE_MIXED 2
756 #define IWL_OPERATION_MODE_20MHZ 3
757
758 #define IWL_TX_CRC_SIZE 4
759 #define IWL_TX_DELIMITER_SIZE 4
760
761 #define TX_POWER_IWL_ILLEGAL_VOLTAGE -10000
762
763 /* Sensitivity and chain noise calibration */
764 #define INITIALIZATION_VALUE 0xFFFF
765 #define IWL4965_CAL_NUM_BEACONS 20
766 #define IWL_CAL_NUM_BEACONS 16
767 #define MAXIMUM_ALLOWED_PATHLOSS 15
768
769 #define CHAIN_NOISE_MAX_DELTA_GAIN_CODE 3
770
771 #define MAX_FA_OFDM 50
772 #define MIN_FA_OFDM 5
773 #define MAX_FA_CCK 50
774 #define MIN_FA_CCK 5
775
776 #define AUTO_CORR_STEP_OFDM 1
777
778 #define AUTO_CORR_STEP_CCK 3
779 #define AUTO_CORR_MAX_TH_CCK 160
780
781 #define NRG_DIFF 2
782 #define NRG_STEP_CCK 2
783 #define NRG_MARGIN 8
784 #define MAX_NUMBER_CCK_NO_FA 100
785
786 #define AUTO_CORR_CCK_MIN_VAL_DEF (125)
787
788 #define CHAIN_A 0
789 #define CHAIN_B 1
790 #define CHAIN_C 2
791 #define CHAIN_NOISE_DELTA_GAIN_INIT_VAL 4
792 #define ALL_BAND_FILTER 0xFF00
793 #define IN_BAND_FILTER 0xFF
794 #define MIN_AVERAGE_NOISE_MAX_VALUE 0xFFFFFFFF
795
796 #define NRG_NUM_PREV_STAT_L 20
797 #define NUM_RX_CHAINS 3
798
799 enum iwl4965_false_alarm_state {
800 IWL_FA_TOO_MANY = 0,
801 IWL_FA_TOO_FEW = 1,
802 IWL_FA_GOOD_RANGE = 2,
803 };
804
805 enum iwl4965_chain_noise_state {
806 IWL_CHAIN_NOISE_ALIVE = 0, /* must be 0 */
807 IWL_CHAIN_NOISE_ACCUMULATE,
808 IWL_CHAIN_NOISE_CALIBRATED,
809 IWL_CHAIN_NOISE_DONE,
810 };
811
812 enum iwl4965_calib_enabled_state {
813 IWL_CALIB_DISABLED = 0, /* must be 0 */
814 IWL_CALIB_ENABLED = 1,
815 };
816
817
818 /*
819 * enum iwl_calib
820 * defines the order in which results of initial calibrations
821 * should be sent to the runtime uCode
822 */
823 enum iwl_calib {
824 IWL_CALIB_XTAL,
825 IWL_CALIB_DC,
826 IWL_CALIB_LO,
827 IWL_CALIB_TX_IQ,
828 IWL_CALIB_TX_IQ_PERD,
829 IWL_CALIB_BASE_BAND,
830 IWL_CALIB_MAX
831 };
832
833 /* Opaque calibration results */
834 struct iwl_calib_result {
835 void *buf;
836 size_t buf_len;
837 };
838
839 enum ucode_type {
840 UCODE_NONE = 0,
841 UCODE_INIT,
842 UCODE_RT
843 };
844
845 /* Sensitivity calib data */
846 struct iwl_sensitivity_data {
847 u32 auto_corr_ofdm;
848 u32 auto_corr_ofdm_mrc;
849 u32 auto_corr_ofdm_x1;
850 u32 auto_corr_ofdm_mrc_x1;
851 u32 auto_corr_cck;
852 u32 auto_corr_cck_mrc;
853
854 u32 last_bad_plcp_cnt_ofdm;
855 u32 last_fa_cnt_ofdm;
856 u32 last_bad_plcp_cnt_cck;
857 u32 last_fa_cnt_cck;
858
859 u32 nrg_curr_state;
860 u32 nrg_prev_state;
861 u32 nrg_value[10];
862 u8 nrg_silence_rssi[NRG_NUM_PREV_STAT_L];
863 u32 nrg_silence_ref;
864 u32 nrg_energy_idx;
865 u32 nrg_silence_idx;
866 u32 nrg_th_cck;
867 s32 nrg_auto_corr_silence_diff;
868 u32 num_in_cck_no_fa;
869 u32 nrg_th_ofdm;
870
871 u16 barker_corr_th_min;
872 u16 barker_corr_th_min_mrc;
873 u16 nrg_th_cca;
874 };
875
876 /* Chain noise (differential Rx gain) calib data */
877 struct iwl_chain_noise_data {
878 u32 active_chains;
879 u32 chain_noise_a;
880 u32 chain_noise_b;
881 u32 chain_noise_c;
882 u32 chain_signal_a;
883 u32 chain_signal_b;
884 u32 chain_signal_c;
885 u16 beacon_count;
886 u8 disconn_array[NUM_RX_CHAINS];
887 u8 delta_gain_code[NUM_RX_CHAINS];
888 u8 radio_write;
889 u8 state;
890 };
891
892 #define EEPROM_SEM_TIMEOUT 10 /* milliseconds */
893 #define EEPROM_SEM_RETRY_LIMIT 1000 /* number of attempts (not time) */
894
895 #define IWL_TRAFFIC_ENTRIES (256)
896 #define IWL_TRAFFIC_ENTRY_SIZE (64)
897
898 enum {
899 MEASUREMENT_READY = (1 << 0),
900 MEASUREMENT_ACTIVE = (1 << 1),
901 };
902
903 enum iwl_nvm_type {
904 NVM_DEVICE_TYPE_EEPROM = 0,
905 NVM_DEVICE_TYPE_OTP,
906 };
907
908 /*
909 * Two types of OTP memory access modes
910 * IWL_OTP_ACCESS_ABSOLUTE - absolute address mode,
911 * based on physical memory addressing
912 * IWL_OTP_ACCESS_RELATIVE - relative address mode,
913 * based on logical memory addressing
914 */
915 enum iwl_access_mode {
916 IWL_OTP_ACCESS_ABSOLUTE,
917 IWL_OTP_ACCESS_RELATIVE,
918 };
919
920 /**
921 * enum iwl_pa_type - Power Amplifier type
922 * @IWL_PA_SYSTEM: based on uCode configuration
923 * @IWL_PA_INTERNAL: use Internal only
924 */
925 enum iwl_pa_type {
926 IWL_PA_SYSTEM = 0,
927 IWL_PA_INTERNAL = 1,
928 };
929
930 /* interrupt statistics */
931 struct isr_statistics {
932 u32 hw;
933 u32 sw;
934 u32 sw_err;
935 u32 sch;
936 u32 alive;
937 u32 rfkill;
938 u32 ctkill;
939 u32 wakeup;
940 u32 rx;
941 u32 rx_handlers[REPLY_MAX];
942 u32 tx;
943 u32 unhandled;
944 };
945
946 #ifdef CONFIG_IWLWIFI_DEBUGFS
947 /* management statistics */
948 enum iwl_mgmt_stats {
949 MANAGEMENT_ASSOC_REQ = 0,
950 MANAGEMENT_ASSOC_RESP,
951 MANAGEMENT_REASSOC_REQ,
952 MANAGEMENT_REASSOC_RESP,
953 MANAGEMENT_PROBE_REQ,
954 MANAGEMENT_PROBE_RESP,
955 MANAGEMENT_BEACON,
956 MANAGEMENT_ATIM,
957 MANAGEMENT_DISASSOC,
958 MANAGEMENT_AUTH,
959 MANAGEMENT_DEAUTH,
960 MANAGEMENT_ACTION,
961 MANAGEMENT_MAX,
962 };
963 /* control statistics */
964 enum iwl_ctrl_stats {
965 CONTROL_BACK_REQ = 0,
966 CONTROL_BACK,
967 CONTROL_PSPOLL,
968 CONTROL_RTS,
969 CONTROL_CTS,
970 CONTROL_ACK,
971 CONTROL_CFEND,
972 CONTROL_CFENDACK,
973 CONTROL_MAX,
974 };
975
976 struct traffic_stats {
977 u32 mgmt[MANAGEMENT_MAX];
978 u32 ctrl[CONTROL_MAX];
979 u32 data_cnt;
980 u64 data_bytes;
981 };
982 #else
983 struct traffic_stats {
984 u64 data_bytes;
985 };
986 #endif
987
988 /*
989 * iwl_switch_rxon: "channel switch" structure
990 *
991 * @ switch_in_progress: channel switch in progress
992 * @ channel: new channel
993 */
994 struct iwl_switch_rxon {
995 bool switch_in_progress;
996 __le16 channel;
997 };
998
999 struct iwl_priv {
1000
1001 /* ieee device used by generic ieee processing code */
1002 struct ieee80211_hw *hw;
1003 struct ieee80211_channel *ieee_channels;
1004 struct ieee80211_rate *ieee_rates;
1005 struct iwl_cfg *cfg;
1006
1007 /* temporary frame storage list */
1008 struct list_head free_frames;
1009 int frames_count;
1010
1011 enum ieee80211_band band;
1012 int alloc_rxb_page;
1013
1014 void (*rx_handlers[REPLY_MAX])(struct iwl_priv *priv,
1015 struct iwl_rx_mem_buffer *rxb);
1016
1017 struct ieee80211_supported_band bands[IEEE80211_NUM_BANDS];
1018
1019 #if defined(CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT) || defined(CONFIG_IWL3945_SPECTRUM_MEASUREMENT)
1020 /* spectrum measurement report caching */
1021 struct iwl_spectrum_notification measure_report;
1022 u8 measurement_status;
1023 #endif
1024 /* ucode beacon time */
1025 u32 ucode_beacon_time;
1026
1027 /* we allocate array of iwl4965_channel_info for NIC's valid channels.
1028 * Access via channel # using indirect index array */
1029 struct iwl_channel_info *channel_info; /* channel info array */
1030 u8 channel_count; /* # of channels */
1031
1032 /* each calibration channel group in the EEPROM has a derived
1033 * clip setting for each rate. 3945 only.*/
1034 const struct iwl3945_clip_group clip39_groups[5];
1035
1036 /* thermal calibration */
1037 s32 temperature; /* degrees Kelvin */
1038 s32 last_temperature;
1039
1040 /* init calibration results */
1041 struct iwl_calib_result calib_results[IWL_CALIB_MAX];
1042
1043 /* Scan related variables */
1044 unsigned long last_scan_jiffies;
1045 unsigned long next_scan_jiffies;
1046 unsigned long scan_start;
1047 unsigned long scan_pass_start;
1048 unsigned long scan_start_tsf;
1049 void *scan;
1050 int scan_bands;
1051 struct cfg80211_scan_request *scan_request;
1052 u8 scan_tx_ant[IEEE80211_NUM_BANDS];
1053 u8 mgmt_tx_ant;
1054
1055 /* spinlock */
1056 spinlock_t lock; /* protect general shared data */
1057 spinlock_t hcmd_lock; /* protect hcmd */
1058 spinlock_t reg_lock; /* protect hw register access */
1059 struct mutex mutex;
1060
1061 /* basic pci-network driver stuff */
1062 struct pci_dev *pci_dev;
1063
1064 /* pci hardware address support */
1065 void __iomem *hw_base;
1066 u32 hw_rev;
1067 u32 hw_wa_rev;
1068 u8 rev_id;
1069
1070 /* uCode images, save to reload in case of failure */
1071 u32 ucode_ver; /* version of ucode, copy of
1072 iwl_ucode.ver */
1073 struct fw_desc ucode_code; /* runtime inst */
1074 struct fw_desc ucode_data; /* runtime data original */
1075 struct fw_desc ucode_data_backup; /* runtime data save/restore */
1076 struct fw_desc ucode_init; /* initialization inst */
1077 struct fw_desc ucode_init_data; /* initialization data */
1078 struct fw_desc ucode_boot; /* bootstrap inst */
1079 enum ucode_type ucode_type;
1080 u8 ucode_write_complete; /* the image write is complete */
1081
1082
1083 struct iwl_rxon_time_cmd rxon_timing;
1084
1085 /* We declare this const so it can only be
1086 * changed via explicit cast within the
1087 * routines that actually update the physical
1088 * hardware */
1089 const struct iwl_rxon_cmd active_rxon;
1090 struct iwl_rxon_cmd staging_rxon;
1091
1092 struct iwl_switch_rxon switch_rxon;
1093
1094 /* 1st responses from initialize and runtime uCode images.
1095 * 4965's initialize alive response contains some calibration data. */
1096 struct iwl_init_alive_resp card_alive_init;
1097 struct iwl_alive_resp card_alive;
1098
1099 unsigned long last_blink_time;
1100 u8 last_blink_rate;
1101 u8 allow_blinking;
1102 u64 led_tpt;
1103
1104 u16 active_rate;
1105 u16 active_rate_basic;
1106
1107 u8 assoc_station_added;
1108 u8 start_calib;
1109 struct iwl_sensitivity_data sensitivity_data;
1110 struct iwl_chain_noise_data chain_noise_data;
1111 __le16 sensitivity_tbl[HD_TABLE_SIZE];
1112
1113 struct iwl_ht_config current_ht_config;
1114 u8 last_phy_res[100];
1115
1116 /* Rate scaling data */
1117 u8 retry_rate;
1118
1119 wait_queue_head_t wait_command_queue;
1120
1121 int activity_timer_active;
1122
1123 /* Rx and Tx DMA processing queues */
1124 struct iwl_rx_queue rxq;
1125 struct iwl_tx_queue *txq;
1126 unsigned long txq_ctx_active_msk;
1127 struct iwl_dma_ptr kw; /* keep warm address */
1128 struct iwl_dma_ptr scd_bc_tbls;
1129
1130 u32 scd_base_addr; /* scheduler sram base address */
1131
1132 unsigned long status;
1133
1134 int last_rx_rssi; /* From Rx packet statistics */
1135 int last_rx_noise; /* From beacon statistics */
1136
1137 /* counts mgmt, ctl, and data packets */
1138 struct traffic_stats tx_stats;
1139 struct traffic_stats rx_stats;
1140
1141 /* counts interrupts */
1142 struct isr_statistics isr_stats;
1143
1144 struct iwl_power_mgr power_data;
1145 struct iwl_tt_mgmt thermal_throttle;
1146
1147 struct iwl_notif_statistics statistics;
1148 #ifdef CONFIG_IWLWIFI_DEBUG
1149 struct iwl_notif_statistics accum_statistics;
1150 #endif
1151
1152 /* context information */
1153 u16 rates_mask;
1154
1155 u8 bssid[ETH_ALEN];
1156 u16 rts_threshold;
1157 u8 mac_addr[ETH_ALEN];
1158
1159 /*station table variables */
1160 spinlock_t sta_lock;
1161 int num_stations;
1162 struct iwl_station_entry stations[IWL_STATION_COUNT];
1163 struct iwl_wep_key wep_keys[WEP_KEYS_MAX];
1164 u8 default_wep_key;
1165 u8 key_mapping_key;
1166 unsigned long ucode_key_table;
1167
1168 /* queue refcounts */
1169 #define IWL_MAX_HW_QUEUES 32
1170 unsigned long queue_stopped[BITS_TO_LONGS(IWL_MAX_HW_QUEUES)];
1171 /* for each AC */
1172 atomic_t queue_stop_count[4];
1173
1174 /* Indication if ieee80211_ops->open has been called */
1175 u8 is_open;
1176
1177 u8 mac80211_registered;
1178
1179 /* Rx'd packet timing information */
1180 u32 last_beacon_time;
1181 u64 last_tsf;
1182
1183 /* eeprom */
1184 u8 *eeprom;
1185 int nvm_device_type;
1186 struct iwl_eeprom_calib_info *calib_info;
1187
1188 enum nl80211_iftype iw_mode;
1189
1190 struct sk_buff *ibss_beacon;
1191
1192 /* Last Rx'd beacon timestamp */
1193 u64 timestamp;
1194 u16 beacon_int;
1195 struct ieee80211_vif *vif;
1196
1197 /*Added for 3945 */
1198 void *shared_virt;
1199 dma_addr_t shared_phys;
1200 /*End*/
1201 struct iwl_hw_params hw_params;
1202
1203 /* INT ICT Table */
1204 __le32 *ict_tbl;
1205 dma_addr_t ict_tbl_dma;
1206 dma_addr_t aligned_ict_tbl_dma;
1207 int ict_index;
1208 void *ict_tbl_vir;
1209 u32 inta;
1210 bool use_ict;
1211
1212 u32 inta_mask;
1213 /* Current association information needed to configure the
1214 * hardware */
1215 u16 assoc_id;
1216 u16 assoc_capability;
1217
1218 struct iwl_qos_info qos_data;
1219
1220 struct workqueue_struct *workqueue;
1221
1222 struct work_struct up;
1223 struct work_struct restart;
1224 struct work_struct calibrated_work;
1225 struct work_struct scan_completed;
1226 struct work_struct rx_replenish;
1227 struct work_struct abort_scan;
1228 struct work_struct update_link_led;
1229 struct work_struct auth_work;
1230 struct work_struct report_work;
1231 struct work_struct request_scan;
1232 struct work_struct beacon_update;
1233 struct work_struct tt_work;
1234 struct work_struct ct_enter;
1235 struct work_struct ct_exit;
1236
1237 struct tasklet_struct irq_tasklet;
1238
1239 struct delayed_work init_alive_start;
1240 struct delayed_work alive_start;
1241 struct delayed_work scan_check;
1242
1243 /*For 3945 only*/
1244 struct delayed_work thermal_periodic;
1245 struct delayed_work rfkill_poll;
1246
1247 /* TX Power */
1248 s8 tx_power_user_lmt;
1249 s8 tx_power_device_lmt;
1250 s8 tx_power_lmt_in_half_dbm; /* max tx power in half-dBm format */
1251
1252
1253 #ifdef CONFIG_IWLWIFI_DEBUG
1254 /* debugging info */
1255 u32 debug_level; /* per device debugging will override global
1256 iwl_debug_level if set */
1257 u32 framecnt_to_us;
1258 atomic_t restrict_refcnt;
1259 bool disable_ht40;
1260 #ifdef CONFIG_IWLWIFI_DEBUGFS
1261 /* debugfs */
1262 u16 tx_traffic_idx;
1263 u16 rx_traffic_idx;
1264 u8 *tx_traffic;
1265 u8 *rx_traffic;
1266 struct iwl_debugfs *dbgfs;
1267 #endif /* CONFIG_IWLWIFI_DEBUGFS */
1268 #endif /* CONFIG_IWLWIFI_DEBUG */
1269
1270 struct work_struct txpower_work;
1271 u32 disable_sens_cal;
1272 u32 disable_chain_noise_cal;
1273 u32 disable_tx_power_cal;
1274 struct work_struct run_time_calib_work;
1275 struct timer_list statistics_periodic;
1276 bool hw_ready;
1277 /*For 3945*/
1278 #define IWL_DEFAULT_TX_POWER 0x0F
1279
1280 struct iwl3945_notif_statistics statistics_39;
1281
1282 u32 sta_supp_rates;
1283 }; /*iwl_priv */
1284
1285 static inline void iwl_txq_ctx_activate(struct iwl_priv *priv, int txq_id)
1286 {
1287 set_bit(txq_id, &priv->txq_ctx_active_msk);
1288 }
1289
1290 static inline void iwl_txq_ctx_deactivate(struct iwl_priv *priv, int txq_id)
1291 {
1292 clear_bit(txq_id, &priv->txq_ctx_active_msk);
1293 }
1294
1295 #ifdef CONFIG_IWLWIFI_DEBUG
1296 const char *iwl_get_tx_fail_reason(u32 status);
1297 /*
1298 * iwl_get_debug_level: Return active debug level for device
1299 *
1300 * Using sysfs it is possible to set per device debug level. This debug
1301 * level will be used if set, otherwise the global debug level which can be
1302 * set via module parameter is used.
1303 */
1304 static inline u32 iwl_get_debug_level(struct iwl_priv *priv)
1305 {
1306 if (priv->debug_level)
1307 return priv->debug_level;
1308 else
1309 return iwl_debug_level;
1310 }
1311 #else
1312 static inline const char *iwl_get_tx_fail_reason(u32 status) { return ""; }
1313
1314 static inline u32 iwl_get_debug_level(struct iwl_priv *priv)
1315 {
1316 return iwl_debug_level;
1317 }
1318 #endif
1319
1320
1321 static inline struct ieee80211_hdr *iwl_tx_queue_get_hdr(struct iwl_priv *priv,
1322 int txq_id, int idx)
1323 {
1324 if (priv->txq[txq_id].txb[idx].skb[0])
1325 return (struct ieee80211_hdr *)priv->txq[txq_id].
1326 txb[idx].skb[0]->data;
1327 return NULL;
1328 }
1329
1330
1331 static inline int iwl_is_associated(struct iwl_priv *priv)
1332 {
1333 return (priv->active_rxon.filter_flags & RXON_FILTER_ASSOC_MSK) ? 1 : 0;
1334 }
1335
1336 static inline int is_channel_valid(const struct iwl_channel_info *ch_info)
1337 {
1338 if (ch_info == NULL)
1339 return 0;
1340 return (ch_info->flags & EEPROM_CHANNEL_VALID) ? 1 : 0;
1341 }
1342
1343 static inline int is_channel_radar(const struct iwl_channel_info *ch_info)
1344 {
1345 return (ch_info->flags & EEPROM_CHANNEL_RADAR) ? 1 : 0;
1346 }
1347
1348 static inline u8 is_channel_a_band(const struct iwl_channel_info *ch_info)
1349 {
1350 return ch_info->band == IEEE80211_BAND_5GHZ;
1351 }
1352
1353 static inline u8 is_channel_bg_band(const struct iwl_channel_info *ch_info)
1354 {
1355 return ch_info->band == IEEE80211_BAND_2GHZ;
1356 }
1357
1358 static inline int is_channel_passive(const struct iwl_channel_info *ch)
1359 {
1360 return (!(ch->flags & EEPROM_CHANNEL_ACTIVE)) ? 1 : 0;
1361 }
1362
1363 static inline int is_channel_ibss(const struct iwl_channel_info *ch)
1364 {
1365 return ((ch->flags & EEPROM_CHANNEL_IBSS)) ? 1 : 0;
1366 }
1367
1368 #endif /* __iwl_dev_h__ */
This page took 0.059975 seconds and 5 git commands to generate.