Merge git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
[deliverable/linux.git] / drivers / net / wireless / iwlwifi / iwl-dev.h
1 /******************************************************************************
2 *
3 * Copyright(c) 2003 - 2009 Intel Corporation. All rights reserved.
4 *
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of version 2 of the GNU General Public License as
7 * published by the Free Software Foundation.
8 *
9 * This program is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
12 * more details.
13 *
14 * You should have received a copy of the GNU General Public License along with
15 * this program; if not, write to the Free Software Foundation, Inc.,
16 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
17 *
18 * The full GNU General Public License is included in this distribution in the
19 * file called LICENSE.
20 *
21 * Contact Information:
22 * Intel Linux Wireless <ilw@linux.intel.com>
23 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
24 *
25 *****************************************************************************/
26 /*
27 * Please use this file (iwl-dev.h) for driver implementation definitions.
28 * Please use iwl-commands.h for uCode API definitions.
29 * Please use iwl-4965-hw.h for hardware-related definitions.
30 */
31
32 #ifndef __iwl_dev_h__
33 #define __iwl_dev_h__
34
35 #include <linux/pci.h> /* for struct pci_device_id */
36 #include <linux/kernel.h>
37 #include <net/ieee80211_radiotap.h>
38
39 #include "iwl-eeprom.h"
40 #include "iwl-csr.h"
41 #include "iwl-prph.h"
42 #include "iwl-fh.h"
43 #include "iwl-debug.h"
44 #include "iwl-4965-hw.h"
45 #include "iwl-3945-hw.h"
46 #include "iwl-led.h"
47 #include "iwl-power.h"
48 #include "iwl-agn-rs.h"
49
50 /* configuration for the iwl4965 */
51 extern struct iwl_cfg iwl4965_agn_cfg;
52 extern struct iwl_cfg iwl5300_agn_cfg;
53 extern struct iwl_cfg iwl5100_agn_cfg;
54 extern struct iwl_cfg iwl5350_agn_cfg;
55 extern struct iwl_cfg iwl5100_bgn_cfg;
56 extern struct iwl_cfg iwl5100_abg_cfg;
57 extern struct iwl_cfg iwl5150_agn_cfg;
58 extern struct iwl_cfg iwl5150_abg_cfg;
59 extern struct iwl_cfg iwl6000i_2agn_cfg;
60 extern struct iwl_cfg iwl6000i_2abg_cfg;
61 extern struct iwl_cfg iwl6000i_2bg_cfg;
62 extern struct iwl_cfg iwl6000_3agn_cfg;
63 extern struct iwl_cfg iwl6050_2agn_cfg;
64 extern struct iwl_cfg iwl6050_2abg_cfg;
65 extern struct iwl_cfg iwl1000_bgn_cfg;
66 extern struct iwl_cfg iwl1000_bg_cfg;
67
68 struct iwl_tx_queue;
69
70 /* shared structures from iwl-5000.c */
71 extern struct iwl_mod_params iwl50_mod_params;
72 extern struct iwl_ucode_ops iwl5000_ucode;
73 extern struct iwl_lib_ops iwl5000_lib;
74 extern struct iwl_hcmd_ops iwl5000_hcmd;
75 extern struct iwl_hcmd_utils_ops iwl5000_hcmd_utils;
76
77 /* shared functions from iwl-5000.c */
78 extern u16 iwl5000_get_hcmd_size(u8 cmd_id, u16 len);
79 extern u16 iwl5000_build_addsta_hcmd(const struct iwl_addsta_cmd *cmd,
80 u8 *data);
81 extern void iwl5000_rts_tx_cmd_flag(struct ieee80211_tx_info *info,
82 __le32 *tx_flags);
83 extern int iwl5000_calc_rssi(struct iwl_priv *priv,
84 struct iwl_rx_phy_res *rx_resp);
85 extern void iwl5000_nic_config(struct iwl_priv *priv);
86 extern u16 iwl5000_eeprom_calib_version(struct iwl_priv *priv);
87 extern const u8 *iwl5000_eeprom_query_addr(const struct iwl_priv *priv,
88 size_t offset);
89 extern void iwl5000_txq_update_byte_cnt_tbl(struct iwl_priv *priv,
90 struct iwl_tx_queue *txq,
91 u16 byte_cnt);
92 extern void iwl5000_txq_inval_byte_cnt_tbl(struct iwl_priv *priv,
93 struct iwl_tx_queue *txq);
94 extern int iwl5000_load_ucode(struct iwl_priv *priv);
95 extern void iwl5000_init_alive_start(struct iwl_priv *priv);
96 extern int iwl5000_alive_notify(struct iwl_priv *priv);
97 extern int iwl5000_hw_set_hw_params(struct iwl_priv *priv);
98 extern int iwl5000_txq_agg_enable(struct iwl_priv *priv, int txq_id,
99 int tx_fifo, int sta_id, int tid, u16 ssn_idx);
100 extern int iwl5000_txq_agg_disable(struct iwl_priv *priv, u16 txq_id,
101 u16 ssn_idx, u8 tx_fifo);
102 extern void iwl5000_txq_set_sched(struct iwl_priv *priv, u32 mask);
103 extern void iwl5000_setup_deferred_work(struct iwl_priv *priv);
104 extern void iwl5000_rx_handler_setup(struct iwl_priv *priv);
105 extern int iwl5000_hw_valid_rtc_data_addr(u32 addr);
106 extern int iwl5000_send_tx_power(struct iwl_priv *priv);
107 extern void iwl5000_temperature(struct iwl_priv *priv);
108
109 /* CT-KILL constants */
110 #define CT_KILL_THRESHOLD_LEGACY 110 /* in Celsius */
111 #define CT_KILL_THRESHOLD 114 /* in Celsius */
112 #define CT_KILL_EXIT_THRESHOLD 95 /* in Celsius */
113
114 /* Default noise level to report when noise measurement is not available.
115 * This may be because we're:
116 * 1) Not associated (4965, no beacon statistics being sent to driver)
117 * 2) Scanning (noise measurement does not apply to associated channel)
118 * 3) Receiving CCK (3945 delivers noise info only for OFDM frames)
119 * Use default noise value of -127 ... this is below the range of measurable
120 * Rx dBm for either 3945 or 4965, so it can indicate "unmeasurable" to user.
121 * Also, -127 works better than 0 when averaging frames with/without
122 * noise info (e.g. averaging might be done in app); measured dBm values are
123 * always negative ... using a negative value as the default keeps all
124 * averages within an s8's (used in some apps) range of negative values. */
125 #define IWL_NOISE_MEAS_NOT_AVAILABLE (-127)
126
127 /*
128 * RTS threshold here is total size [2347] minus 4 FCS bytes
129 * Per spec:
130 * a value of 0 means RTS on all data/management packets
131 * a value > max MSDU size means no RTS
132 * else RTS for data/management frames where MPDU is larger
133 * than RTS value.
134 */
135 #define DEFAULT_RTS_THRESHOLD 2347U
136 #define MIN_RTS_THRESHOLD 0U
137 #define MAX_RTS_THRESHOLD 2347U
138 #define MAX_MSDU_SIZE 2304U
139 #define MAX_MPDU_SIZE 2346U
140 #define DEFAULT_BEACON_INTERVAL 100U
141 #define DEFAULT_SHORT_RETRY_LIMIT 7U
142 #define DEFAULT_LONG_RETRY_LIMIT 4U
143
144 struct iwl_rx_mem_buffer {
145 dma_addr_t page_dma;
146 struct page *page;
147 struct list_head list;
148 };
149
150 #define rxb_addr(r) page_address(r->page)
151
152 /* defined below */
153 struct iwl_device_cmd;
154
155 struct iwl_cmd_meta {
156 /* only for SYNC commands, iff the reply skb is wanted */
157 struct iwl_host_cmd *source;
158 /*
159 * only for ASYNC commands
160 * (which is somewhat stupid -- look at iwl-sta.c for instance
161 * which duplicates a bunch of code because the callback isn't
162 * invoked for SYNC commands, if it were and its result passed
163 * through it would be simpler...)
164 */
165 void (*callback)(struct iwl_priv *priv,
166 struct iwl_device_cmd *cmd,
167 struct iwl_rx_packet *pkt);
168
169 /* The CMD_SIZE_HUGE flag bit indicates that the command
170 * structure is stored at the end of the shared queue memory. */
171 u32 flags;
172
173 DECLARE_PCI_UNMAP_ADDR(mapping)
174 DECLARE_PCI_UNMAP_LEN(len)
175 };
176
177 /*
178 * Generic queue structure
179 *
180 * Contains common data for Rx and Tx queues
181 */
182 struct iwl_queue {
183 int n_bd; /* number of BDs in this queue */
184 int write_ptr; /* 1-st empty entry (index) host_w*/
185 int read_ptr; /* last used entry (index) host_r*/
186 dma_addr_t dma_addr; /* physical addr for BD's */
187 int n_window; /* safe queue window */
188 u32 id;
189 int low_mark; /* low watermark, resume queue if free
190 * space more than this */
191 int high_mark; /* high watermark, stop queue if free
192 * space less than this */
193 } __attribute__ ((packed));
194
195 /* One for each TFD */
196 struct iwl_tx_info {
197 struct sk_buff *skb[IWL_NUM_OF_TBS - 1];
198 };
199
200 /**
201 * struct iwl_tx_queue - Tx Queue for DMA
202 * @q: generic Rx/Tx queue descriptor
203 * @bd: base of circular buffer of TFDs
204 * @cmd: array of command/TX buffer pointers
205 * @meta: array of meta data for each command/tx buffer
206 * @dma_addr_cmd: physical address of cmd/tx buffer array
207 * @txb: array of per-TFD driver data
208 * @need_update: indicates need to update read/write index
209 * @sched_retry: indicates queue is high-throughput aggregation (HT AGG) enabled
210 *
211 * A Tx queue consists of circular buffer of BDs (a.k.a. TFDs, transmit frame
212 * descriptors) and required locking structures.
213 */
214 #define TFD_TX_CMD_SLOTS 256
215 #define TFD_CMD_SLOTS 32
216
217 struct iwl_tx_queue {
218 struct iwl_queue q;
219 void *tfds;
220 struct iwl_device_cmd **cmd;
221 struct iwl_cmd_meta *meta;
222 struct iwl_tx_info *txb;
223 u8 need_update;
224 u8 sched_retry;
225 u8 active;
226 u8 swq_id;
227 };
228
229 #define IWL_NUM_SCAN_RATES (2)
230
231 struct iwl4965_channel_tgd_info {
232 u8 type;
233 s8 max_power;
234 };
235
236 struct iwl4965_channel_tgh_info {
237 s64 last_radar_time;
238 };
239
240 #define IWL4965_MAX_RATE (33)
241
242 struct iwl3945_clip_group {
243 /* maximum power level to prevent clipping for each rate, derived by
244 * us from this band's saturation power in EEPROM */
245 const s8 clip_powers[IWL_MAX_RATES];
246 };
247
248 /* current Tx power values to use, one for each rate for each channel.
249 * requested power is limited by:
250 * -- regulatory EEPROM limits for this channel
251 * -- hardware capabilities (clip-powers)
252 * -- spectrum management
253 * -- user preference (e.g. iwconfig)
254 * when requested power is set, base power index must also be set. */
255 struct iwl3945_channel_power_info {
256 struct iwl3945_tx_power tpc; /* actual radio and DSP gain settings */
257 s8 power_table_index; /* actual (compenst'd) index into gain table */
258 s8 base_power_index; /* gain index for power at factory temp. */
259 s8 requested_power; /* power (dBm) requested for this chnl/rate */
260 };
261
262 /* current scan Tx power values to use, one for each scan rate for each
263 * channel. */
264 struct iwl3945_scan_power_info {
265 struct iwl3945_tx_power tpc; /* actual radio and DSP gain settings */
266 s8 power_table_index; /* actual (compenst'd) index into gain table */
267 s8 requested_power; /* scan pwr (dBm) requested for chnl/rate */
268 };
269
270 /*
271 * One for each channel, holds all channel setup data
272 * Some of the fields (e.g. eeprom and flags/max_power_avg) are redundant
273 * with one another!
274 */
275 struct iwl_channel_info {
276 struct iwl4965_channel_tgd_info tgd;
277 struct iwl4965_channel_tgh_info tgh;
278 struct iwl_eeprom_channel eeprom; /* EEPROM regulatory limit */
279 struct iwl_eeprom_channel ht40_eeprom; /* EEPROM regulatory limit for
280 * HT40 channel */
281
282 u8 channel; /* channel number */
283 u8 flags; /* flags copied from EEPROM */
284 s8 max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */
285 s8 curr_txpow; /* (dBm) regulatory/spectrum/user (not h/w) limit */
286 s8 min_power; /* always 0 */
287 s8 scan_power; /* (dBm) regul. eeprom, direct scans, any rate */
288
289 u8 group_index; /* 0-4, maps channel to group1/2/3/4/5 */
290 u8 band_index; /* 0-4, maps channel to band1/2/3/4/5 */
291 enum ieee80211_band band;
292
293 /* HT40 channel info */
294 s8 ht40_max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */
295 u8 ht40_flags; /* flags copied from EEPROM */
296 u8 ht40_extension_channel; /* HT_IE_EXT_CHANNEL_* */
297
298 /* Radio/DSP gain settings for each "normal" data Tx rate.
299 * These include, in addition to RF and DSP gain, a few fields for
300 * remembering/modifying gain settings (indexes). */
301 struct iwl3945_channel_power_info power_info[IWL4965_MAX_RATE];
302
303 /* Radio/DSP gain settings for each scan rate, for directed scans. */
304 struct iwl3945_scan_power_info scan_pwr_info[IWL_NUM_SCAN_RATES];
305 };
306
307 #define IWL_TX_FIFO_AC0 0
308 #define IWL_TX_FIFO_AC1 1
309 #define IWL_TX_FIFO_AC2 2
310 #define IWL_TX_FIFO_AC3 3
311 #define IWL_TX_FIFO_HCCA_1 5
312 #define IWL_TX_FIFO_HCCA_2 6
313 #define IWL_TX_FIFO_NONE 7
314
315 /* Minimum number of queues. MAX_NUM is defined in hw specific files.
316 * Set the minimum to accommodate the 4 standard TX queues, 1 command
317 * queue, 2 (unused) HCCA queues, and 4 HT queues (one for each AC) */
318 #define IWL_MIN_NUM_QUEUES 10
319
320 /*
321 * Queue #4 is the command queue for 3945/4965/5x00/1000/6x00,
322 * the driver maps it into the appropriate device FIFO for the
323 * uCode.
324 */
325 #define IWL_CMD_QUEUE_NUM 4
326
327 /* Power management (not Tx power) structures */
328
329 enum iwl_pwr_src {
330 IWL_PWR_SRC_VMAIN,
331 IWL_PWR_SRC_VAUX,
332 };
333
334 #define IEEE80211_DATA_LEN 2304
335 #define IEEE80211_4ADDR_LEN 30
336 #define IEEE80211_HLEN (IEEE80211_4ADDR_LEN)
337 #define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN)
338
339 struct iwl_frame {
340 union {
341 struct ieee80211_hdr frame;
342 struct iwl_tx_beacon_cmd beacon;
343 u8 raw[IEEE80211_FRAME_LEN];
344 u8 cmd[360];
345 } u;
346 struct list_head list;
347 };
348
349 #define SEQ_TO_SN(seq) (((seq) & IEEE80211_SCTL_SEQ) >> 4)
350 #define SN_TO_SEQ(ssn) (((ssn) << 4) & IEEE80211_SCTL_SEQ)
351 #define MAX_SN ((IEEE80211_SCTL_SEQ) >> 4)
352
353 enum {
354 CMD_SYNC = 0,
355 CMD_SIZE_NORMAL = 0,
356 CMD_NO_SKB = 0,
357 CMD_SIZE_HUGE = (1 << 0),
358 CMD_ASYNC = (1 << 1),
359 CMD_WANT_SKB = (1 << 2),
360 };
361
362 #define DEF_CMD_PAYLOAD_SIZE 320
363
364 /*
365 * IWL_LINK_HDR_MAX should include ieee80211_hdr, radiotap header,
366 * SNAP header and alignment. It should also be big enough for 802.11
367 * control frames.
368 */
369 #define IWL_LINK_HDR_MAX 64
370
371 /**
372 * struct iwl_device_cmd
373 *
374 * For allocation of the command and tx queues, this establishes the overall
375 * size of the largest command we send to uCode, except for a scan command
376 * (which is relatively huge; space is allocated separately).
377 */
378 struct iwl_device_cmd {
379 struct iwl_cmd_header hdr; /* uCode API */
380 union {
381 u32 flags;
382 u8 val8;
383 u16 val16;
384 u32 val32;
385 struct iwl_tx_cmd tx;
386 struct iwl6000_channel_switch_cmd chswitch;
387 u8 payload[DEF_CMD_PAYLOAD_SIZE];
388 } __attribute__ ((packed)) cmd;
389 } __attribute__ ((packed));
390
391 #define TFD_MAX_PAYLOAD_SIZE (sizeof(struct iwl_device_cmd))
392
393
394 struct iwl_host_cmd {
395 const void *data;
396 unsigned long reply_page;
397 void (*callback)(struct iwl_priv *priv,
398 struct iwl_device_cmd *cmd,
399 struct iwl_rx_packet *pkt);
400 u32 flags;
401 u16 len;
402 u8 id;
403 };
404
405 #define SUP_RATE_11A_MAX_NUM_CHANNELS 8
406 #define SUP_RATE_11B_MAX_NUM_CHANNELS 4
407 #define SUP_RATE_11G_MAX_NUM_CHANNELS 12
408
409 /**
410 * struct iwl_rx_queue - Rx queue
411 * @bd: driver's pointer to buffer of receive buffer descriptors (rbd)
412 * @dma_addr: bus address of buffer of receive buffer descriptors (rbd)
413 * @read: Shared index to newest available Rx buffer
414 * @write: Shared index to oldest written Rx packet
415 * @free_count: Number of pre-allocated buffers in rx_free
416 * @rx_free: list of free SKBs for use
417 * @rx_used: List of Rx buffers with no SKB
418 * @need_update: flag to indicate we need to update read/write index
419 * @rb_stts: driver's pointer to receive buffer status
420 * @rb_stts_dma: bus address of receive buffer status
421 *
422 * NOTE: rx_free and rx_used are used as a FIFO for iwl_rx_mem_buffers
423 */
424 struct iwl_rx_queue {
425 __le32 *bd;
426 dma_addr_t dma_addr;
427 struct iwl_rx_mem_buffer pool[RX_QUEUE_SIZE + RX_FREE_BUFFERS];
428 struct iwl_rx_mem_buffer *queue[RX_QUEUE_SIZE];
429 u32 read;
430 u32 write;
431 u32 free_count;
432 u32 write_actual;
433 struct list_head rx_free;
434 struct list_head rx_used;
435 int need_update;
436 struct iwl_rb_status *rb_stts;
437 dma_addr_t rb_stts_dma;
438 spinlock_t lock;
439 };
440
441 #define IWL_SUPPORTED_RATES_IE_LEN 8
442
443 #define MAX_TID_COUNT 9
444
445 #define IWL_INVALID_RATE 0xFF
446 #define IWL_INVALID_VALUE -1
447
448 /**
449 * struct iwl_ht_agg -- aggregation status while waiting for block-ack
450 * @txq_id: Tx queue used for Tx attempt
451 * @frame_count: # frames attempted by Tx command
452 * @wait_for_ba: Expect block-ack before next Tx reply
453 * @start_idx: Index of 1st Transmit Frame Descriptor (TFD) in Tx window
454 * @bitmap0: Low order bitmap, one bit for each frame pending ACK in Tx window
455 * @bitmap1: High order, one bit for each frame pending ACK in Tx window
456 * @rate_n_flags: Rate at which Tx was attempted
457 *
458 * If REPLY_TX indicates that aggregation was attempted, driver must wait
459 * for block ack (REPLY_COMPRESSED_BA). This struct stores tx reply info
460 * until block ack arrives.
461 */
462 struct iwl_ht_agg {
463 u16 txq_id;
464 u16 frame_count;
465 u16 wait_for_ba;
466 u16 start_idx;
467 u64 bitmap;
468 u32 rate_n_flags;
469 #define IWL_AGG_OFF 0
470 #define IWL_AGG_ON 1
471 #define IWL_EMPTYING_HW_QUEUE_ADDBA 2
472 #define IWL_EMPTYING_HW_QUEUE_DELBA 3
473 u8 state;
474 };
475
476
477 struct iwl_tid_data {
478 u16 seq_number;
479 u16 tfds_in_queue;
480 struct iwl_ht_agg agg;
481 };
482
483 struct iwl_hw_key {
484 enum ieee80211_key_alg alg;
485 int keylen;
486 u8 keyidx;
487 u8 key[32];
488 };
489
490 union iwl_ht_rate_supp {
491 u16 rates;
492 struct {
493 u8 siso_rate;
494 u8 mimo_rate;
495 };
496 };
497
498 #define CFG_HT_RX_AMPDU_FACTOR_DEF (0x3)
499
500 /*
501 * Maximal MPDU density for TX aggregation
502 * 4 - 2us density
503 * 5 - 4us density
504 * 6 - 8us density
505 * 7 - 16us density
506 */
507 #define CFG_HT_MPDU_DENSITY_4USEC (0x5)
508 #define CFG_HT_MPDU_DENSITY_DEF CFG_HT_MPDU_DENSITY_4USEC
509
510 struct iwl_ht_config {
511 /* self configuration data */
512 bool is_ht;
513 bool is_40mhz;
514 bool single_chain_sufficient;
515 enum ieee80211_smps_mode smps; /* current smps mode */
516 /* BSS related data */
517 u8 extension_chan_offset;
518 u8 ht_protection;
519 u8 non_GF_STA_present;
520 };
521
522 union iwl_qos_capabity {
523 struct {
524 u8 edca_count:4; /* bit 0-3 */
525 u8 q_ack:1; /* bit 4 */
526 u8 queue_request:1; /* bit 5 */
527 u8 txop_request:1; /* bit 6 */
528 u8 reserved:1; /* bit 7 */
529 } q_AP;
530 struct {
531 u8 acvo_APSD:1; /* bit 0 */
532 u8 acvi_APSD:1; /* bit 1 */
533 u8 ac_bk_APSD:1; /* bit 2 */
534 u8 ac_be_APSD:1; /* bit 3 */
535 u8 q_ack:1; /* bit 4 */
536 u8 max_len:2; /* bit 5-6 */
537 u8 more_data_ack:1; /* bit 7 */
538 } q_STA;
539 u8 val;
540 };
541
542 /* QoS structures */
543 struct iwl_qos_info {
544 int qos_active;
545 union iwl_qos_capabity qos_cap;
546 struct iwl_qosparam_cmd def_qos_parm;
547 };
548
549 struct iwl_station_entry {
550 struct iwl_addsta_cmd sta;
551 struct iwl_tid_data tid[MAX_TID_COUNT];
552 u8 used;
553 struct iwl_hw_key keyinfo;
554 };
555
556 /*
557 * iwl_station_priv: Driver's private station information
558 *
559 * When mac80211 creates a station it reserves some space (hw->sta_data_size)
560 * in the structure for use by driver. This structure is places in that
561 * space.
562 */
563 struct iwl_station_priv {
564 struct iwl_lq_sta lq_sta;
565 atomic_t pending_frames;
566 bool client;
567 bool asleep;
568 };
569
570 /* one for each uCode image (inst/data, boot/init/runtime) */
571 struct fw_desc {
572 void *v_addr; /* access by driver */
573 dma_addr_t p_addr; /* access by card's busmaster DMA */
574 u32 len; /* bytes */
575 };
576
577 /* uCode file layout */
578 struct iwl_ucode_header {
579 __le32 ver; /* major/minor/API/serial */
580 union {
581 struct {
582 __le32 inst_size; /* bytes of runtime code */
583 __le32 data_size; /* bytes of runtime data */
584 __le32 init_size; /* bytes of init code */
585 __le32 init_data_size; /* bytes of init data */
586 __le32 boot_size; /* bytes of bootstrap code */
587 u8 data[0]; /* in same order as sizes */
588 } v1;
589 struct {
590 __le32 build; /* build number */
591 __le32 inst_size; /* bytes of runtime code */
592 __le32 data_size; /* bytes of runtime data */
593 __le32 init_size; /* bytes of init code */
594 __le32 init_data_size; /* bytes of init data */
595 __le32 boot_size; /* bytes of bootstrap code */
596 u8 data[0]; /* in same order as sizes */
597 } v2;
598 } u;
599 };
600 #define UCODE_HEADER_SIZE(ver) ((ver) == 1 ? 24 : 28)
601
602 struct iwl4965_ibss_seq {
603 u8 mac[ETH_ALEN];
604 u16 seq_num;
605 u16 frag_num;
606 unsigned long packet_time;
607 struct list_head list;
608 };
609
610 struct iwl_sensitivity_ranges {
611 u16 min_nrg_cck;
612 u16 max_nrg_cck;
613
614 u16 nrg_th_cck;
615 u16 nrg_th_ofdm;
616
617 u16 auto_corr_min_ofdm;
618 u16 auto_corr_min_ofdm_mrc;
619 u16 auto_corr_min_ofdm_x1;
620 u16 auto_corr_min_ofdm_mrc_x1;
621
622 u16 auto_corr_max_ofdm;
623 u16 auto_corr_max_ofdm_mrc;
624 u16 auto_corr_max_ofdm_x1;
625 u16 auto_corr_max_ofdm_mrc_x1;
626
627 u16 auto_corr_max_cck;
628 u16 auto_corr_max_cck_mrc;
629 u16 auto_corr_min_cck;
630 u16 auto_corr_min_cck_mrc;
631
632 u16 barker_corr_th_min;
633 u16 barker_corr_th_min_mrc;
634 u16 nrg_th_cca;
635 };
636
637
638 #define KELVIN_TO_CELSIUS(x) ((x)-273)
639 #define CELSIUS_TO_KELVIN(x) ((x)+273)
640
641
642 /**
643 * struct iwl_hw_params
644 * @max_txq_num: Max # Tx queues supported
645 * @dma_chnl_num: Number of Tx DMA/FIFO channels
646 * @scd_bc_tbls_size: size of scheduler byte count tables
647 * @tfd_size: TFD size
648 * @tx/rx_chains_num: Number of TX/RX chains
649 * @valid_tx/rx_ant: usable antennas
650 * @max_rxq_size: Max # Rx frames in Rx queue (must be power-of-2)
651 * @max_rxq_log: Log-base-2 of max_rxq_size
652 * @rx_page_order: Rx buffer page order
653 * @rx_wrt_ptr_reg: FH{39}_RSCSR_CHNL0_WPTR
654 * @max_stations:
655 * @bcast_sta_id:
656 * @ht40_channel: is 40MHz width possible in band 2.4
657 * BIT(IEEE80211_BAND_5GHZ) BIT(IEEE80211_BAND_5GHZ)
658 * @sw_crypto: 0 for hw, 1 for sw
659 * @max_xxx_size: for ucode uses
660 * @ct_kill_threshold: temperature threshold
661 * @calib_init_cfg: setup initial calibrations for the hw
662 * @struct iwl_sensitivity_ranges: range of sensitivity values
663 */
664 struct iwl_hw_params {
665 u8 max_txq_num;
666 u8 dma_chnl_num;
667 u16 scd_bc_tbls_size;
668 u32 tfd_size;
669 u8 tx_chains_num;
670 u8 rx_chains_num;
671 u8 valid_tx_ant;
672 u8 valid_rx_ant;
673 u16 max_rxq_size;
674 u16 max_rxq_log;
675 u32 rx_page_order;
676 u32 rx_wrt_ptr_reg;
677 u8 max_stations;
678 u8 bcast_sta_id;
679 u8 ht40_channel;
680 u8 max_beacon_itrvl; /* in 1024 ms */
681 u32 max_inst_size;
682 u32 max_data_size;
683 u32 max_bsm_size;
684 u32 ct_kill_threshold; /* value in hw-dependent units */
685 u32 ct_kill_exit_threshold; /* value in hw-dependent units */
686 /* for 1000, 6000 series and up */
687 u32 calib_init_cfg;
688 const struct iwl_sensitivity_ranges *sens;
689 };
690
691
692 /******************************************************************************
693 *
694 * Functions implemented in core module which are forward declared here
695 * for use by iwl-[4-5].c
696 *
697 * NOTE: The implementation of these functions are not hardware specific
698 * which is why they are in the core module files.
699 *
700 * Naming convention --
701 * iwl_ <-- Is part of iwlwifi
702 * iwlXXXX_ <-- Hardware specific (implemented in iwl-XXXX.c for XXXX)
703 * iwl4965_bg_ <-- Called from work queue context
704 * iwl4965_mac_ <-- mac80211 callback
705 *
706 ****************************************************************************/
707 extern void iwl_update_chain_flags(struct iwl_priv *priv);
708 extern int iwl_set_pwr_src(struct iwl_priv *priv, enum iwl_pwr_src src);
709 extern const u8 iwl_bcast_addr[ETH_ALEN];
710 extern int iwl_rxq_stop(struct iwl_priv *priv);
711 extern void iwl_txq_ctx_stop(struct iwl_priv *priv);
712 extern int iwl_queue_space(const struct iwl_queue *q);
713 static inline int iwl_queue_used(const struct iwl_queue *q, int i)
714 {
715 return q->write_ptr >= q->read_ptr ?
716 (i >= q->read_ptr && i < q->write_ptr) :
717 !(i < q->read_ptr && i >= q->write_ptr);
718 }
719
720
721 static inline u8 get_cmd_index(struct iwl_queue *q, u32 index, int is_huge)
722 {
723 /*
724 * This is for init calibration result and scan command which
725 * required buffer > TFD_MAX_PAYLOAD_SIZE,
726 * the big buffer at end of command array
727 */
728 if (is_huge)
729 return q->n_window; /* must be power of 2 */
730
731 /* Otherwise, use normal size buffers */
732 return index & (q->n_window - 1);
733 }
734
735
736 struct iwl_dma_ptr {
737 dma_addr_t dma;
738 void *addr;
739 size_t size;
740 };
741
742 #define IWL_OPERATION_MODE_AUTO 0
743 #define IWL_OPERATION_MODE_HT_ONLY 1
744 #define IWL_OPERATION_MODE_MIXED 2
745 #define IWL_OPERATION_MODE_20MHZ 3
746
747 #define IWL_TX_CRC_SIZE 4
748 #define IWL_TX_DELIMITER_SIZE 4
749
750 #define TX_POWER_IWL_ILLEGAL_VOLTAGE -10000
751
752 /* Sensitivity and chain noise calibration */
753 #define INITIALIZATION_VALUE 0xFFFF
754 #define IWL4965_CAL_NUM_BEACONS 20
755 #define IWL_CAL_NUM_BEACONS 16
756 #define MAXIMUM_ALLOWED_PATHLOSS 15
757
758 #define CHAIN_NOISE_MAX_DELTA_GAIN_CODE 3
759
760 #define MAX_FA_OFDM 50
761 #define MIN_FA_OFDM 5
762 #define MAX_FA_CCK 50
763 #define MIN_FA_CCK 5
764
765 #define AUTO_CORR_STEP_OFDM 1
766
767 #define AUTO_CORR_STEP_CCK 3
768 #define AUTO_CORR_MAX_TH_CCK 160
769
770 #define NRG_DIFF 2
771 #define NRG_STEP_CCK 2
772 #define NRG_MARGIN 8
773 #define MAX_NUMBER_CCK_NO_FA 100
774
775 #define AUTO_CORR_CCK_MIN_VAL_DEF (125)
776
777 #define CHAIN_A 0
778 #define CHAIN_B 1
779 #define CHAIN_C 2
780 #define CHAIN_NOISE_DELTA_GAIN_INIT_VAL 4
781 #define ALL_BAND_FILTER 0xFF00
782 #define IN_BAND_FILTER 0xFF
783 #define MIN_AVERAGE_NOISE_MAX_VALUE 0xFFFFFFFF
784
785 #define NRG_NUM_PREV_STAT_L 20
786 #define NUM_RX_CHAINS 3
787
788 enum iwl4965_false_alarm_state {
789 IWL_FA_TOO_MANY = 0,
790 IWL_FA_TOO_FEW = 1,
791 IWL_FA_GOOD_RANGE = 2,
792 };
793
794 enum iwl4965_chain_noise_state {
795 IWL_CHAIN_NOISE_ALIVE = 0, /* must be 0 */
796 IWL_CHAIN_NOISE_ACCUMULATE,
797 IWL_CHAIN_NOISE_CALIBRATED,
798 IWL_CHAIN_NOISE_DONE,
799 };
800
801 enum iwl4965_calib_enabled_state {
802 IWL_CALIB_DISABLED = 0, /* must be 0 */
803 IWL_CALIB_ENABLED = 1,
804 };
805
806
807 /*
808 * enum iwl_calib
809 * defines the order in which results of initial calibrations
810 * should be sent to the runtime uCode
811 */
812 enum iwl_calib {
813 IWL_CALIB_XTAL,
814 IWL_CALIB_DC,
815 IWL_CALIB_LO,
816 IWL_CALIB_TX_IQ,
817 IWL_CALIB_TX_IQ_PERD,
818 IWL_CALIB_BASE_BAND,
819 IWL_CALIB_MAX
820 };
821
822 /* Opaque calibration results */
823 struct iwl_calib_result {
824 void *buf;
825 size_t buf_len;
826 };
827
828 enum ucode_type {
829 UCODE_NONE = 0,
830 UCODE_INIT,
831 UCODE_RT
832 };
833
834 /* Sensitivity calib data */
835 struct iwl_sensitivity_data {
836 u32 auto_corr_ofdm;
837 u32 auto_corr_ofdm_mrc;
838 u32 auto_corr_ofdm_x1;
839 u32 auto_corr_ofdm_mrc_x1;
840 u32 auto_corr_cck;
841 u32 auto_corr_cck_mrc;
842
843 u32 last_bad_plcp_cnt_ofdm;
844 u32 last_fa_cnt_ofdm;
845 u32 last_bad_plcp_cnt_cck;
846 u32 last_fa_cnt_cck;
847
848 u32 nrg_curr_state;
849 u32 nrg_prev_state;
850 u32 nrg_value[10];
851 u8 nrg_silence_rssi[NRG_NUM_PREV_STAT_L];
852 u32 nrg_silence_ref;
853 u32 nrg_energy_idx;
854 u32 nrg_silence_idx;
855 u32 nrg_th_cck;
856 s32 nrg_auto_corr_silence_diff;
857 u32 num_in_cck_no_fa;
858 u32 nrg_th_ofdm;
859
860 u16 barker_corr_th_min;
861 u16 barker_corr_th_min_mrc;
862 u16 nrg_th_cca;
863 };
864
865 /* Chain noise (differential Rx gain) calib data */
866 struct iwl_chain_noise_data {
867 u32 active_chains;
868 u32 chain_noise_a;
869 u32 chain_noise_b;
870 u32 chain_noise_c;
871 u32 chain_signal_a;
872 u32 chain_signal_b;
873 u32 chain_signal_c;
874 u16 beacon_count;
875 u8 disconn_array[NUM_RX_CHAINS];
876 u8 delta_gain_code[NUM_RX_CHAINS];
877 u8 radio_write;
878 u8 state;
879 };
880
881 #define EEPROM_SEM_TIMEOUT 10 /* milliseconds */
882 #define EEPROM_SEM_RETRY_LIMIT 1000 /* number of attempts (not time) */
883
884 #define IWL_TRAFFIC_ENTRIES (256)
885 #define IWL_TRAFFIC_ENTRY_SIZE (64)
886
887 enum {
888 MEASUREMENT_READY = (1 << 0),
889 MEASUREMENT_ACTIVE = (1 << 1),
890 };
891
892 enum iwl_nvm_type {
893 NVM_DEVICE_TYPE_EEPROM = 0,
894 NVM_DEVICE_TYPE_OTP,
895 };
896
897 /*
898 * Two types of OTP memory access modes
899 * IWL_OTP_ACCESS_ABSOLUTE - absolute address mode,
900 * based on physical memory addressing
901 * IWL_OTP_ACCESS_RELATIVE - relative address mode,
902 * based on logical memory addressing
903 */
904 enum iwl_access_mode {
905 IWL_OTP_ACCESS_ABSOLUTE,
906 IWL_OTP_ACCESS_RELATIVE,
907 };
908
909 /**
910 * enum iwl_pa_type - Power Amplifier type
911 * @IWL_PA_SYSTEM: based on uCode configuration
912 * @IWL_PA_INTERNAL: use Internal only
913 */
914 enum iwl_pa_type {
915 IWL_PA_SYSTEM = 0,
916 IWL_PA_INTERNAL = 1,
917 };
918
919 /* interrupt statistics */
920 struct isr_statistics {
921 u32 hw;
922 u32 sw;
923 u32 sw_err;
924 u32 sch;
925 u32 alive;
926 u32 rfkill;
927 u32 ctkill;
928 u32 wakeup;
929 u32 rx;
930 u32 rx_handlers[REPLY_MAX];
931 u32 tx;
932 u32 unhandled;
933 };
934
935 #ifdef CONFIG_IWLWIFI_DEBUGFS
936 /* management statistics */
937 enum iwl_mgmt_stats {
938 MANAGEMENT_ASSOC_REQ = 0,
939 MANAGEMENT_ASSOC_RESP,
940 MANAGEMENT_REASSOC_REQ,
941 MANAGEMENT_REASSOC_RESP,
942 MANAGEMENT_PROBE_REQ,
943 MANAGEMENT_PROBE_RESP,
944 MANAGEMENT_BEACON,
945 MANAGEMENT_ATIM,
946 MANAGEMENT_DISASSOC,
947 MANAGEMENT_AUTH,
948 MANAGEMENT_DEAUTH,
949 MANAGEMENT_ACTION,
950 MANAGEMENT_MAX,
951 };
952 /* control statistics */
953 enum iwl_ctrl_stats {
954 CONTROL_BACK_REQ = 0,
955 CONTROL_BACK,
956 CONTROL_PSPOLL,
957 CONTROL_RTS,
958 CONTROL_CTS,
959 CONTROL_ACK,
960 CONTROL_CFEND,
961 CONTROL_CFENDACK,
962 CONTROL_MAX,
963 };
964
965 struct traffic_stats {
966 u32 mgmt[MANAGEMENT_MAX];
967 u32 ctrl[CONTROL_MAX];
968 u32 data_cnt;
969 u64 data_bytes;
970 };
971 #else
972 struct traffic_stats {
973 u64 data_bytes;
974 };
975 #endif
976
977 /*
978 * iwl_switch_rxon: "channel switch" structure
979 *
980 * @ switch_in_progress: channel switch in progress
981 * @ channel: new channel
982 */
983 struct iwl_switch_rxon {
984 bool switch_in_progress;
985 __le16 channel;
986 };
987
988 /*
989 * schedule the timer to wake up every UCODE_TRACE_PERIOD milliseconds
990 * to perform continuous uCode event logging operation if enabled
991 */
992 #define UCODE_TRACE_PERIOD (100)
993
994 /*
995 * iwl_event_log: current uCode event log position
996 *
997 * @ucode_trace: enable/disable ucode continuous trace timer
998 * @num_wraps: how many times the event buffer wraps
999 * @next_entry: the entry just before the next one that uCode would fill
1000 * @non_wraps_count: counter for no wrap detected when dump ucode events
1001 * @wraps_once_count: counter for wrap once detected when dump ucode events
1002 * @wraps_more_count: counter for wrap more than once detected
1003 * when dump ucode events
1004 */
1005 struct iwl_event_log {
1006 bool ucode_trace;
1007 u32 num_wraps;
1008 u32 next_entry;
1009 int non_wraps_count;
1010 int wraps_once_count;
1011 int wraps_more_count;
1012 };
1013
1014 struct iwl_priv {
1015
1016 /* ieee device used by generic ieee processing code */
1017 struct ieee80211_hw *hw;
1018 struct ieee80211_channel *ieee_channels;
1019 struct ieee80211_rate *ieee_rates;
1020 struct iwl_cfg *cfg;
1021
1022 /* temporary frame storage list */
1023 struct list_head free_frames;
1024 int frames_count;
1025
1026 enum ieee80211_band band;
1027 int alloc_rxb_page;
1028
1029 void (*rx_handlers[REPLY_MAX])(struct iwl_priv *priv,
1030 struct iwl_rx_mem_buffer *rxb);
1031
1032 struct ieee80211_supported_band bands[IEEE80211_NUM_BANDS];
1033
1034 #if defined(CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT) || defined(CONFIG_IWL3945_SPECTRUM_MEASUREMENT)
1035 /* spectrum measurement report caching */
1036 struct iwl_spectrum_notification measure_report;
1037 u8 measurement_status;
1038 #endif
1039 /* ucode beacon time */
1040 u32 ucode_beacon_time;
1041
1042 /* we allocate array of iwl4965_channel_info for NIC's valid channels.
1043 * Access via channel # using indirect index array */
1044 struct iwl_channel_info *channel_info; /* channel info array */
1045 u8 channel_count; /* # of channels */
1046
1047 /* each calibration channel group in the EEPROM has a derived
1048 * clip setting for each rate. 3945 only.*/
1049 const struct iwl3945_clip_group clip39_groups[5];
1050
1051 /* thermal calibration */
1052 s32 temperature; /* degrees Kelvin */
1053 s32 last_temperature;
1054
1055 /* init calibration results */
1056 struct iwl_calib_result calib_results[IWL_CALIB_MAX];
1057
1058 /* Scan related variables */
1059 unsigned long last_scan_jiffies;
1060 unsigned long next_scan_jiffies;
1061 unsigned long scan_start;
1062 unsigned long scan_pass_start;
1063 unsigned long scan_start_tsf;
1064 void *scan;
1065 int scan_bands;
1066 struct cfg80211_scan_request *scan_request;
1067 u8 scan_tx_ant[IEEE80211_NUM_BANDS];
1068 u8 mgmt_tx_ant;
1069
1070 /* spinlock */
1071 spinlock_t lock; /* protect general shared data */
1072 spinlock_t hcmd_lock; /* protect hcmd */
1073 spinlock_t reg_lock; /* protect hw register access */
1074 struct mutex mutex;
1075
1076 /* basic pci-network driver stuff */
1077 struct pci_dev *pci_dev;
1078
1079 /* pci hardware address support */
1080 void __iomem *hw_base;
1081 u32 hw_rev;
1082 u32 hw_wa_rev;
1083 u8 rev_id;
1084
1085 /* uCode images, save to reload in case of failure */
1086 u32 ucode_ver; /* version of ucode, copy of
1087 iwl_ucode.ver */
1088 struct fw_desc ucode_code; /* runtime inst */
1089 struct fw_desc ucode_data; /* runtime data original */
1090 struct fw_desc ucode_data_backup; /* runtime data save/restore */
1091 struct fw_desc ucode_init; /* initialization inst */
1092 struct fw_desc ucode_init_data; /* initialization data */
1093 struct fw_desc ucode_boot; /* bootstrap inst */
1094 enum ucode_type ucode_type;
1095 u8 ucode_write_complete; /* the image write is complete */
1096
1097
1098 struct iwl_rxon_time_cmd rxon_timing;
1099
1100 /* We declare this const so it can only be
1101 * changed via explicit cast within the
1102 * routines that actually update the physical
1103 * hardware */
1104 const struct iwl_rxon_cmd active_rxon;
1105 struct iwl_rxon_cmd staging_rxon;
1106
1107 struct iwl_switch_rxon switch_rxon;
1108
1109 /* 1st responses from initialize and runtime uCode images.
1110 * 4965's initialize alive response contains some calibration data. */
1111 struct iwl_init_alive_resp card_alive_init;
1112 struct iwl_alive_resp card_alive;
1113
1114 unsigned long last_blink_time;
1115 u8 last_blink_rate;
1116 u8 allow_blinking;
1117 u64 led_tpt;
1118
1119 u16 active_rate;
1120 u16 active_rate_basic;
1121
1122 u8 assoc_station_added;
1123 u8 start_calib;
1124 struct iwl_sensitivity_data sensitivity_data;
1125 struct iwl_chain_noise_data chain_noise_data;
1126 __le16 sensitivity_tbl[HD_TABLE_SIZE];
1127
1128 struct iwl_ht_config current_ht_config;
1129 u8 last_phy_res[100];
1130
1131 /* Rate scaling data */
1132 u8 retry_rate;
1133
1134 wait_queue_head_t wait_command_queue;
1135
1136 int activity_timer_active;
1137
1138 /* Rx and Tx DMA processing queues */
1139 struct iwl_rx_queue rxq;
1140 struct iwl_tx_queue *txq;
1141 unsigned long txq_ctx_active_msk;
1142 struct iwl_dma_ptr kw; /* keep warm address */
1143 struct iwl_dma_ptr scd_bc_tbls;
1144
1145 u32 scd_base_addr; /* scheduler sram base address */
1146
1147 unsigned long status;
1148
1149 int last_rx_rssi; /* From Rx packet statistics */
1150 int last_rx_noise; /* From beacon statistics */
1151
1152 /* counts mgmt, ctl, and data packets */
1153 struct traffic_stats tx_stats;
1154 struct traffic_stats rx_stats;
1155
1156 /* counts interrupts */
1157 struct isr_statistics isr_stats;
1158
1159 struct iwl_power_mgr power_data;
1160 struct iwl_tt_mgmt thermal_throttle;
1161
1162 struct iwl_notif_statistics statistics;
1163 #ifdef CONFIG_IWLWIFI_DEBUG
1164 struct iwl_notif_statistics accum_statistics;
1165 #endif
1166
1167 /* context information */
1168 u16 rates_mask;
1169
1170 u8 bssid[ETH_ALEN];
1171 u16 rts_threshold;
1172 u8 mac_addr[ETH_ALEN];
1173
1174 /*station table variables */
1175 spinlock_t sta_lock;
1176 int num_stations;
1177 struct iwl_station_entry stations[IWL_STATION_COUNT];
1178 struct iwl_wep_key wep_keys[WEP_KEYS_MAX];
1179 u8 default_wep_key;
1180 u8 key_mapping_key;
1181 unsigned long ucode_key_table;
1182
1183 /* queue refcounts */
1184 #define IWL_MAX_HW_QUEUES 32
1185 unsigned long queue_stopped[BITS_TO_LONGS(IWL_MAX_HW_QUEUES)];
1186 /* for each AC */
1187 atomic_t queue_stop_count[4];
1188
1189 /* Indication if ieee80211_ops->open has been called */
1190 u8 is_open;
1191
1192 u8 mac80211_registered;
1193
1194 /* Rx'd packet timing information */
1195 u32 last_beacon_time;
1196 u64 last_tsf;
1197
1198 /* eeprom -- this is in the card's little endian byte order */
1199 u8 *eeprom;
1200 int nvm_device_type;
1201 struct iwl_eeprom_calib_info *calib_info;
1202
1203 enum nl80211_iftype iw_mode;
1204
1205 struct sk_buff *ibss_beacon;
1206
1207 /* Last Rx'd beacon timestamp */
1208 u64 timestamp;
1209 u16 beacon_int;
1210 struct ieee80211_vif *vif;
1211
1212 /*Added for 3945 */
1213 void *shared_virt;
1214 dma_addr_t shared_phys;
1215 /*End*/
1216 struct iwl_hw_params hw_params;
1217
1218 /* INT ICT Table */
1219 __le32 *ict_tbl;
1220 dma_addr_t ict_tbl_dma;
1221 dma_addr_t aligned_ict_tbl_dma;
1222 int ict_index;
1223 void *ict_tbl_vir;
1224 u32 inta;
1225 bool use_ict;
1226
1227 u32 inta_mask;
1228 /* Current association information needed to configure the
1229 * hardware */
1230 u16 assoc_id;
1231 u16 assoc_capability;
1232
1233 struct iwl_qos_info qos_data;
1234
1235 struct workqueue_struct *workqueue;
1236
1237 struct work_struct up;
1238 struct work_struct restart;
1239 struct work_struct calibrated_work;
1240 struct work_struct scan_completed;
1241 struct work_struct rx_replenish;
1242 struct work_struct abort_scan;
1243 struct work_struct update_link_led;
1244 struct work_struct auth_work;
1245 struct work_struct report_work;
1246 struct work_struct request_scan;
1247 struct work_struct beacon_update;
1248 struct work_struct tt_work;
1249 struct work_struct ct_enter;
1250 struct work_struct ct_exit;
1251
1252 struct tasklet_struct irq_tasklet;
1253
1254 struct delayed_work init_alive_start;
1255 struct delayed_work alive_start;
1256 struct delayed_work scan_check;
1257
1258 /*For 3945 only*/
1259 struct delayed_work thermal_periodic;
1260 struct delayed_work rfkill_poll;
1261
1262 /* TX Power */
1263 s8 tx_power_user_lmt;
1264 s8 tx_power_device_lmt;
1265 s8 tx_power_lmt_in_half_dbm; /* max tx power in half-dBm format */
1266
1267
1268 #ifdef CONFIG_IWLWIFI_DEBUG
1269 /* debugging info */
1270 u32 debug_level; /* per device debugging will override global
1271 iwl_debug_level if set */
1272 u32 framecnt_to_us;
1273 atomic_t restrict_refcnt;
1274 bool disable_ht40;
1275 #ifdef CONFIG_IWLWIFI_DEBUGFS
1276 /* debugfs */
1277 u16 tx_traffic_idx;
1278 u16 rx_traffic_idx;
1279 u8 *tx_traffic;
1280 u8 *rx_traffic;
1281 struct iwl_debugfs *dbgfs;
1282 #endif /* CONFIG_IWLWIFI_DEBUGFS */
1283 #endif /* CONFIG_IWLWIFI_DEBUG */
1284
1285 struct work_struct txpower_work;
1286 u32 disable_sens_cal;
1287 u32 disable_chain_noise_cal;
1288 u32 disable_tx_power_cal;
1289 struct work_struct run_time_calib_work;
1290 struct timer_list statistics_periodic;
1291 struct timer_list ucode_trace;
1292 bool hw_ready;
1293 /*For 3945*/
1294 #define IWL_DEFAULT_TX_POWER 0x0F
1295
1296 struct iwl3945_notif_statistics statistics_39;
1297
1298 u32 sta_supp_rates;
1299
1300 struct iwl_event_log event_log;
1301 }; /*iwl_priv */
1302
1303 static inline void iwl_txq_ctx_activate(struct iwl_priv *priv, int txq_id)
1304 {
1305 set_bit(txq_id, &priv->txq_ctx_active_msk);
1306 }
1307
1308 static inline void iwl_txq_ctx_deactivate(struct iwl_priv *priv, int txq_id)
1309 {
1310 clear_bit(txq_id, &priv->txq_ctx_active_msk);
1311 }
1312
1313 #ifdef CONFIG_IWLWIFI_DEBUG
1314 const char *iwl_get_tx_fail_reason(u32 status);
1315 /*
1316 * iwl_get_debug_level: Return active debug level for device
1317 *
1318 * Using sysfs it is possible to set per device debug level. This debug
1319 * level will be used if set, otherwise the global debug level which can be
1320 * set via module parameter is used.
1321 */
1322 static inline u32 iwl_get_debug_level(struct iwl_priv *priv)
1323 {
1324 if (priv->debug_level)
1325 return priv->debug_level;
1326 else
1327 return iwl_debug_level;
1328 }
1329 #else
1330 static inline const char *iwl_get_tx_fail_reason(u32 status) { return ""; }
1331
1332 static inline u32 iwl_get_debug_level(struct iwl_priv *priv)
1333 {
1334 return iwl_debug_level;
1335 }
1336 #endif
1337
1338
1339 static inline struct ieee80211_hdr *iwl_tx_queue_get_hdr(struct iwl_priv *priv,
1340 int txq_id, int idx)
1341 {
1342 if (priv->txq[txq_id].txb[idx].skb[0])
1343 return (struct ieee80211_hdr *)priv->txq[txq_id].
1344 txb[idx].skb[0]->data;
1345 return NULL;
1346 }
1347
1348
1349 static inline int iwl_is_associated(struct iwl_priv *priv)
1350 {
1351 return (priv->active_rxon.filter_flags & RXON_FILTER_ASSOC_MSK) ? 1 : 0;
1352 }
1353
1354 static inline int is_channel_valid(const struct iwl_channel_info *ch_info)
1355 {
1356 if (ch_info == NULL)
1357 return 0;
1358 return (ch_info->flags & EEPROM_CHANNEL_VALID) ? 1 : 0;
1359 }
1360
1361 static inline int is_channel_radar(const struct iwl_channel_info *ch_info)
1362 {
1363 return (ch_info->flags & EEPROM_CHANNEL_RADAR) ? 1 : 0;
1364 }
1365
1366 static inline u8 is_channel_a_band(const struct iwl_channel_info *ch_info)
1367 {
1368 return ch_info->band == IEEE80211_BAND_5GHZ;
1369 }
1370
1371 static inline u8 is_channel_bg_band(const struct iwl_channel_info *ch_info)
1372 {
1373 return ch_info->band == IEEE80211_BAND_2GHZ;
1374 }
1375
1376 static inline int is_channel_passive(const struct iwl_channel_info *ch)
1377 {
1378 return (!(ch->flags & EEPROM_CHANNEL_ACTIVE)) ? 1 : 0;
1379 }
1380
1381 static inline int is_channel_ibss(const struct iwl_channel_info *ch)
1382 {
1383 return ((ch->flags & EEPROM_CHANNEL_IBSS)) ? 1 : 0;
1384 }
1385
1386 static inline void __iwl_free_pages(struct iwl_priv *priv, struct page *page)
1387 {
1388 __free_pages(page, priv->hw_params.rx_page_order);
1389 priv->alloc_rxb_page--;
1390 }
1391
1392 static inline void iwl_free_pages(struct iwl_priv *priv, unsigned long page)
1393 {
1394 free_pages(page, priv->hw_params.rx_page_order);
1395 priv->alloc_rxb_page--;
1396 }
1397 #endif /* __iwl_dev_h__ */
This page took 0.05849 seconds and 6 git commands to generate.