1 /******************************************************************************
3 * Copyright(c) 2003 - 2008 Intel Corporation. All rights reserved.
5 * Portions of this file are derived from the ipw3945 project, as well
6 * as portions of the ieee80211 subsystem header files.
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of version 2 of the GNU General Public License as
10 * published by the Free Software Foundation.
12 * This program is distributed in the hope that it will be useful, but WITHOUT
13 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
17 * You should have received a copy of the GNU General Public License along with
18 * this program; if not, write to the Free Software Foundation, Inc.,
19 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
21 * The full GNU General Public License is included in this distribution in the
22 * file called LICENSE.
24 * Contact Information:
25 * Intel Linux Wireless <ilw@linux.intel.com>
26 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
28 *****************************************************************************/
30 #include <linux/kernel.h>
31 #include <linux/module.h>
32 #include <linux/init.h>
33 #include <linux/pci.h>
34 #include <linux/dma-mapping.h>
35 #include <linux/delay.h>
36 #include <linux/skbuff.h>
37 #include <linux/netdevice.h>
38 #include <linux/wireless.h>
39 #include <linux/firmware.h>
40 #include <linux/etherdevice.h>
41 #include <linux/if_arp.h>
43 #include <net/ieee80211_radiotap.h>
44 #include <net/lib80211.h>
45 #include <net/mac80211.h>
47 #include <asm/div64.h>
49 #define DRV_NAME "iwl3945"
51 #include "iwl-commands.h"
53 #include "iwl-3945-fh.h"
54 #include "iwl-helpers.h"
58 static int iwl3945_tx_queue_update_write_ptr(struct iwl3945_priv
*priv
,
59 struct iwl3945_tx_queue
*txq
);
61 /******************************************************************************
65 ******************************************************************************/
67 /* module parameters */
68 static int iwl3945_param_disable_hw_scan
; /* def: 0 = use 3945's h/w scan */
69 static u32 iwl3945_param_debug
; /* def: 0 = minimal debug log messages */
70 static int iwl3945_param_disable
; /* def: 0 = enable radio */
71 static int iwl3945_param_antenna
; /* def: 0 = both antennas (use diversity) */
72 int iwl3945_param_hwcrypto
; /* def: 0 = use software encryption */
73 int iwl3945_param_queues_num
= IWL39_MAX_NUM_QUEUES
; /* def: 8 Tx queues */
76 * module name, copyright, version, etc.
79 #define DRV_DESCRIPTION \
80 "Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux"
82 #ifdef CONFIG_IWL3945_DEBUG
88 #ifdef CONFIG_IWL3945_SPECTRUM_MEASUREMENT
94 #define IWL39_VERSION "1.2.26k" VD VS
95 #define DRV_COPYRIGHT "Copyright(c) 2003-2008 Intel Corporation"
96 #define DRV_AUTHOR "<ilw@linux.intel.com>"
97 #define DRV_VERSION IWL39_VERSION
100 MODULE_DESCRIPTION(DRV_DESCRIPTION
);
101 MODULE_VERSION(DRV_VERSION
);
102 MODULE_AUTHOR(DRV_COPYRIGHT
" " DRV_AUTHOR
);
103 MODULE_LICENSE("GPL");
105 static const struct ieee80211_supported_band
*iwl3945_get_band(
106 struct iwl3945_priv
*priv
, enum ieee80211_band band
)
108 return priv
->hw
->wiphy
->bands
[band
];
111 /*************** DMA-QUEUE-GENERAL-FUNCTIONS *****
114 * Theory of operation
116 * A Tx or Rx queue resides in host DRAM, and is comprised of a circular buffer
117 * of buffer descriptors, each of which points to one or more data buffers for
118 * the device to read from or fill. Driver and device exchange status of each
119 * queue via "read" and "write" pointers. Driver keeps minimum of 2 empty
120 * entries in each circular buffer, to protect against confusing empty and full
123 * The device reads or writes the data in the queues via the device's several
124 * DMA/FIFO channels. Each queue is mapped to a single DMA channel.
126 * For Tx queue, there are low mark and high mark limits. If, after queuing
127 * the packet for Tx, free space become < low mark, Tx queue stopped. When
128 * reclaiming packets (on 'tx done IRQ), if free space become > high mark,
131 * The 3945 operates with six queues: One receive queue, one transmit queue
132 * (#4) for sending commands to the device firmware, and four transmit queues
133 * (#0-3) for data tx via EDCA. An additional 2 HCCA queues are unused.
134 ***************************************************/
136 int iwl3945_x2_queue_used(const struct iwl_queue
*q
, int i
)
138 return q
->write_ptr
> q
->read_ptr
?
139 (i
>= q
->read_ptr
&& i
< q
->write_ptr
) :
140 !(i
< q
->read_ptr
&& i
>= q
->write_ptr
);
144 * iwl3945_queue_init - Initialize queue's high/low-water and read/write indexes
146 static int iwl3945_queue_init(struct iwl3945_priv
*priv
, struct iwl_queue
*q
,
147 int count
, int slots_num
, u32 id
)
150 q
->n_window
= slots_num
;
153 /* count must be power-of-two size, otherwise iwl_queue_inc_wrap
154 * and iwl_queue_dec_wrap are broken. */
155 BUG_ON(!is_power_of_2(count
));
157 /* slots_num must be power-of-two size, otherwise
158 * get_cmd_index is broken. */
159 BUG_ON(!is_power_of_2(slots_num
));
161 q
->low_mark
= q
->n_window
/ 4;
165 q
->high_mark
= q
->n_window
/ 8;
166 if (q
->high_mark
< 2)
169 q
->write_ptr
= q
->read_ptr
= 0;
175 * iwl3945_tx_queue_alloc - Alloc driver data and TFD CB for one Tx/cmd queue
177 static int iwl3945_tx_queue_alloc(struct iwl3945_priv
*priv
,
178 struct iwl3945_tx_queue
*txq
, u32 id
)
180 struct pci_dev
*dev
= priv
->pci_dev
;
182 /* Driver private data, only for Tx (not command) queues,
183 * not shared with device. */
184 if (id
!= IWL_CMD_QUEUE_NUM
) {
185 txq
->txb
= kmalloc(sizeof(txq
->txb
[0]) *
186 TFD_QUEUE_SIZE_MAX
, GFP_KERNEL
);
188 IWL_ERROR("kmalloc for auxiliary BD "
189 "structures failed\n");
195 /* Circular buffer of transmit frame descriptors (TFDs),
196 * shared with device */
197 txq
->bd
= pci_alloc_consistent(dev
,
198 sizeof(txq
->bd
[0]) * TFD_QUEUE_SIZE_MAX
,
202 IWL_ERROR("pci_alloc_consistent(%zd) failed\n",
203 sizeof(txq
->bd
[0]) * TFD_QUEUE_SIZE_MAX
);
218 * iwl3945_tx_queue_init - Allocate and initialize one tx/cmd queue
220 int iwl3945_tx_queue_init(struct iwl3945_priv
*priv
,
221 struct iwl3945_tx_queue
*txq
, int slots_num
, u32 txq_id
)
223 struct pci_dev
*dev
= priv
->pci_dev
;
228 * Alloc buffer array for commands (Tx or other types of commands).
229 * For the command queue (#4), allocate command space + one big
230 * command for scan, since scan command is very huge; the system will
231 * not have two scans at the same time, so only one is needed.
232 * For data Tx queues (all other queues), no super-size command
235 len
= sizeof(struct iwl3945_cmd
) * slots_num
;
236 if (txq_id
== IWL_CMD_QUEUE_NUM
)
237 len
+= IWL_MAX_SCAN_SIZE
;
238 txq
->cmd
= pci_alloc_consistent(dev
, len
, &txq
->dma_addr_cmd
);
242 /* Alloc driver data array and TFD circular buffer */
243 rc
= iwl3945_tx_queue_alloc(priv
, txq
, txq_id
);
245 pci_free_consistent(dev
, len
, txq
->cmd
, txq
->dma_addr_cmd
);
249 txq
->need_update
= 0;
251 /* TFD_QUEUE_SIZE_MAX must be power-of-two size, otherwise
252 * iwl_queue_inc_wrap and iwl_queue_dec_wrap are broken. */
253 BUILD_BUG_ON(TFD_QUEUE_SIZE_MAX
& (TFD_QUEUE_SIZE_MAX
- 1));
255 /* Initialize queue high/low-water, head/tail indexes */
256 iwl3945_queue_init(priv
, &txq
->q
, TFD_QUEUE_SIZE_MAX
, slots_num
, txq_id
);
258 /* Tell device where to find queue, enable DMA channel. */
259 iwl3945_hw_tx_queue_init(priv
, txq
);
265 * iwl3945_tx_queue_free - Deallocate DMA queue.
266 * @txq: Transmit queue to deallocate.
268 * Empty queue by removing and destroying all BD's.
270 * 0-fill, but do not free "txq" descriptor structure.
272 void iwl3945_tx_queue_free(struct iwl3945_priv
*priv
, struct iwl3945_tx_queue
*txq
)
274 struct iwl_queue
*q
= &txq
->q
;
275 struct pci_dev
*dev
= priv
->pci_dev
;
281 /* first, empty all BD's */
282 for (; q
->write_ptr
!= q
->read_ptr
;
283 q
->read_ptr
= iwl_queue_inc_wrap(q
->read_ptr
, q
->n_bd
))
284 iwl3945_hw_txq_free_tfd(priv
, txq
);
286 len
= sizeof(struct iwl3945_cmd
) * q
->n_window
;
287 if (q
->id
== IWL_CMD_QUEUE_NUM
)
288 len
+= IWL_MAX_SCAN_SIZE
;
290 /* De-alloc array of command/tx buffers */
291 pci_free_consistent(dev
, len
, txq
->cmd
, txq
->dma_addr_cmd
);
293 /* De-alloc circular buffer of TFDs */
295 pci_free_consistent(dev
, sizeof(struct iwl3945_tfd_frame
) *
296 txq
->q
.n_bd
, txq
->bd
, txq
->q
.dma_addr
);
298 /* De-alloc array of per-TFD driver data */
302 /* 0-fill queue descriptor structure */
303 memset(txq
, 0, sizeof(*txq
));
306 const u8 iwl3945_broadcast_addr
[ETH_ALEN
] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
308 /*************** STATION TABLE MANAGEMENT ****
309 * mac80211 should be examined to determine if sta_info is duplicating
310 * the functionality provided here
313 /**************************************************************/
314 #if 0 /* temporary disable till we add real remove station */
316 * iwl3945_remove_station - Remove driver's knowledge of station.
318 * NOTE: This does not remove station from device's station table.
320 static u8
iwl3945_remove_station(struct iwl3945_priv
*priv
, const u8
*addr
, int is_ap
)
322 int index
= IWL_INVALID_STATION
;
326 spin_lock_irqsave(&priv
->sta_lock
, flags
);
330 else if (is_broadcast_ether_addr(addr
))
331 index
= priv
->hw_setting
.bcast_sta_id
;
333 for (i
= IWL_STA_ID
; i
< priv
->hw_setting
.max_stations
; i
++)
334 if (priv
->stations
[i
].used
&&
335 !compare_ether_addr(priv
->stations
[i
].sta
.sta
.addr
,
341 if (unlikely(index
== IWL_INVALID_STATION
))
344 if (priv
->stations
[index
].used
) {
345 priv
->stations
[index
].used
= 0;
346 priv
->num_stations
--;
349 BUG_ON(priv
->num_stations
< 0);
352 spin_unlock_irqrestore(&priv
->sta_lock
, flags
);
358 * iwl3945_clear_stations_table - Clear the driver's station table
360 * NOTE: This does not clear or otherwise alter the device's station table.
362 static void iwl3945_clear_stations_table(struct iwl3945_priv
*priv
)
366 spin_lock_irqsave(&priv
->sta_lock
, flags
);
368 priv
->num_stations
= 0;
369 memset(priv
->stations
, 0, sizeof(priv
->stations
));
371 spin_unlock_irqrestore(&priv
->sta_lock
, flags
);
375 * iwl3945_add_station - Add station to station tables in driver and device
377 u8
iwl3945_add_station(struct iwl3945_priv
*priv
, const u8
*addr
, int is_ap
, u8 flags
)
380 int index
= IWL_INVALID_STATION
;
381 struct iwl3945_station_entry
*station
;
382 unsigned long flags_spin
;
385 spin_lock_irqsave(&priv
->sta_lock
, flags_spin
);
388 else if (is_broadcast_ether_addr(addr
))
389 index
= priv
->hw_setting
.bcast_sta_id
;
391 for (i
= IWL_STA_ID
; i
< priv
->hw_setting
.max_stations
; i
++) {
392 if (!compare_ether_addr(priv
->stations
[i
].sta
.sta
.addr
,
398 if (!priv
->stations
[i
].used
&&
399 index
== IWL_INVALID_STATION
)
403 /* These two conditions has the same outcome but keep them separate
404 since they have different meaning */
405 if (unlikely(index
== IWL_INVALID_STATION
)) {
406 spin_unlock_irqrestore(&priv
->sta_lock
, flags_spin
);
410 if (priv
->stations
[index
].used
&&
411 !compare_ether_addr(priv
->stations
[index
].sta
.sta
.addr
, addr
)) {
412 spin_unlock_irqrestore(&priv
->sta_lock
, flags_spin
);
416 IWL_DEBUG_ASSOC("Add STA ID %d: %pM\n", index
, addr
);
417 station
= &priv
->stations
[index
];
419 priv
->num_stations
++;
421 /* Set up the REPLY_ADD_STA command to send to device */
422 memset(&station
->sta
, 0, sizeof(struct iwl3945_addsta_cmd
));
423 memcpy(station
->sta
.sta
.addr
, addr
, ETH_ALEN
);
424 station
->sta
.mode
= 0;
425 station
->sta
.sta
.sta_id
= index
;
426 station
->sta
.station_flags
= 0;
428 if (priv
->band
== IEEE80211_BAND_5GHZ
)
429 rate
= IWL_RATE_6M_PLCP
;
431 rate
= IWL_RATE_1M_PLCP
;
433 /* Turn on both antennas for the station... */
434 station
->sta
.rate_n_flags
=
435 iwl3945_hw_set_rate_n_flags(rate
, RATE_MCS_ANT_AB_MSK
);
437 spin_unlock_irqrestore(&priv
->sta_lock
, flags_spin
);
439 /* Add station to device's station table */
440 iwl3945_send_add_station(priv
, &station
->sta
, flags
);
445 /*************** DRIVER STATUS FUNCTIONS *****/
447 static inline int iwl3945_is_ready(struct iwl3945_priv
*priv
)
449 /* The adapter is 'ready' if READY and GEO_CONFIGURED bits are
450 * set but EXIT_PENDING is not */
451 return test_bit(STATUS_READY
, &priv
->status
) &&
452 test_bit(STATUS_GEO_CONFIGURED
, &priv
->status
) &&
453 !test_bit(STATUS_EXIT_PENDING
, &priv
->status
);
456 static inline int iwl3945_is_alive(struct iwl3945_priv
*priv
)
458 return test_bit(STATUS_ALIVE
, &priv
->status
);
461 static inline int iwl3945_is_init(struct iwl3945_priv
*priv
)
463 return test_bit(STATUS_INIT
, &priv
->status
);
466 static inline int iwl3945_is_rfkill_sw(struct iwl3945_priv
*priv
)
468 return test_bit(STATUS_RF_KILL_SW
, &priv
->status
);
471 static inline int iwl3945_is_rfkill_hw(struct iwl3945_priv
*priv
)
473 return test_bit(STATUS_RF_KILL_HW
, &priv
->status
);
476 static inline int iwl3945_is_rfkill(struct iwl3945_priv
*priv
)
478 return iwl3945_is_rfkill_hw(priv
) ||
479 iwl3945_is_rfkill_sw(priv
);
482 static inline int iwl3945_is_ready_rf(struct iwl3945_priv
*priv
)
485 if (iwl3945_is_rfkill(priv
))
488 return iwl3945_is_ready(priv
);
491 /*************** HOST COMMAND QUEUE FUNCTIONS *****/
493 #define IWL_CMD(x) case x: return #x
494 #define HOST_COMPLETE_TIMEOUT (HZ / 2)
497 * iwl3945_enqueue_hcmd - enqueue a uCode command
498 * @priv: device private data point
499 * @cmd: a point to the ucode command structure
501 * The function returns < 0 values to indicate the operation is
502 * failed. On success, it turns the index (> 0) of command in the
505 static int iwl3945_enqueue_hcmd(struct iwl3945_priv
*priv
, struct iwl3945_host_cmd
*cmd
)
507 struct iwl3945_tx_queue
*txq
= &priv
->txq
[IWL_CMD_QUEUE_NUM
];
508 struct iwl_queue
*q
= &txq
->q
;
509 struct iwl3945_tfd_frame
*tfd
;
511 struct iwl3945_cmd
*out_cmd
;
513 u16 fix_size
= (u16
)(cmd
->len
+ sizeof(out_cmd
->hdr
));
514 dma_addr_t phys_addr
;
520 /* If any of the command structures end up being larger than
521 * the TFD_MAX_PAYLOAD_SIZE, and it sent as a 'small' command then
522 * we will need to increase the size of the TFD entries */
523 BUG_ON((fix_size
> TFD39_MAX_PAYLOAD_SIZE
) &&
524 !(cmd
->meta
.flags
& CMD_SIZE_HUGE
));
527 if (iwl3945_is_rfkill(priv
)) {
528 IWL_DEBUG_INFO("Not sending command - RF KILL");
532 if (iwl_queue_space(q
) < ((cmd
->meta
.flags
& CMD_ASYNC
) ? 2 : 1)) {
533 IWL_ERROR("No space for Tx\n");
537 spin_lock_irqsave(&priv
->hcmd_lock
, flags
);
539 tfd
= &txq
->bd
[q
->write_ptr
];
540 memset(tfd
, 0, sizeof(*tfd
));
542 control_flags
= (u32
*) tfd
;
544 idx
= get_cmd_index(q
, q
->write_ptr
, cmd
->meta
.flags
& CMD_SIZE_HUGE
);
545 out_cmd
= &txq
->cmd
[idx
];
547 out_cmd
->hdr
.cmd
= cmd
->id
;
548 memcpy(&out_cmd
->meta
, &cmd
->meta
, sizeof(cmd
->meta
));
549 memcpy(&out_cmd
->cmd
.payload
, cmd
->data
, cmd
->len
);
551 /* At this point, the out_cmd now has all of the incoming cmd
554 out_cmd
->hdr
.flags
= 0;
555 out_cmd
->hdr
.sequence
= cpu_to_le16(QUEUE_TO_SEQ(IWL_CMD_QUEUE_NUM
) |
556 INDEX_TO_SEQ(q
->write_ptr
));
557 if (out_cmd
->meta
.flags
& CMD_SIZE_HUGE
)
558 out_cmd
->hdr
.sequence
|= SEQ_HUGE_FRAME
;
560 phys_addr
= txq
->dma_addr_cmd
+ sizeof(txq
->cmd
[0]) * idx
+
561 offsetof(struct iwl3945_cmd
, hdr
);
562 iwl3945_hw_txq_attach_buf_to_tfd(priv
, tfd
, phys_addr
, fix_size
);
564 pad
= U32_PAD(cmd
->len
);
565 count
= TFD_CTL_COUNT_GET(*control_flags
);
566 *control_flags
= TFD_CTL_COUNT_SET(count
) | TFD_CTL_PAD_SET(pad
);
568 IWL_DEBUG_HC("Sending command %s (#%x), seq: 0x%04X, "
569 "%d bytes at %d[%d]:%d\n",
570 get_cmd_string(out_cmd
->hdr
.cmd
),
571 out_cmd
->hdr
.cmd
, le16_to_cpu(out_cmd
->hdr
.sequence
),
572 fix_size
, q
->write_ptr
, idx
, IWL_CMD_QUEUE_NUM
);
574 txq
->need_update
= 1;
576 /* Increment and update queue's write index */
577 q
->write_ptr
= iwl_queue_inc_wrap(q
->write_ptr
, q
->n_bd
);
578 ret
= iwl3945_tx_queue_update_write_ptr(priv
, txq
);
580 spin_unlock_irqrestore(&priv
->hcmd_lock
, flags
);
581 return ret
? ret
: idx
;
584 static int iwl3945_send_cmd_async(struct iwl3945_priv
*priv
, struct iwl3945_host_cmd
*cmd
)
588 BUG_ON(!(cmd
->meta
.flags
& CMD_ASYNC
));
590 /* An asynchronous command can not expect an SKB to be set. */
591 BUG_ON(cmd
->meta
.flags
& CMD_WANT_SKB
);
593 /* An asynchronous command MUST have a callback. */
594 BUG_ON(!cmd
->meta
.u
.callback
);
596 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
599 ret
= iwl3945_enqueue_hcmd(priv
, cmd
);
601 IWL_ERROR("Error sending %s: iwl3945_enqueue_hcmd failed: %d\n",
602 get_cmd_string(cmd
->id
), ret
);
608 static int iwl3945_send_cmd_sync(struct iwl3945_priv
*priv
, struct iwl3945_host_cmd
*cmd
)
613 BUG_ON(cmd
->meta
.flags
& CMD_ASYNC
);
615 /* A synchronous command can not have a callback set. */
616 BUG_ON(cmd
->meta
.u
.callback
!= NULL
);
618 if (test_and_set_bit(STATUS_HCMD_SYNC_ACTIVE
, &priv
->status
)) {
619 IWL_ERROR("Error sending %s: Already sending a host command\n",
620 get_cmd_string(cmd
->id
));
625 set_bit(STATUS_HCMD_ACTIVE
, &priv
->status
);
627 if (cmd
->meta
.flags
& CMD_WANT_SKB
)
628 cmd
->meta
.source
= &cmd
->meta
;
630 cmd_idx
= iwl3945_enqueue_hcmd(priv
, cmd
);
633 IWL_ERROR("Error sending %s: iwl3945_enqueue_hcmd failed: %d\n",
634 get_cmd_string(cmd
->id
), ret
);
638 ret
= wait_event_interruptible_timeout(priv
->wait_command_queue
,
639 !test_bit(STATUS_HCMD_ACTIVE
, &priv
->status
),
640 HOST_COMPLETE_TIMEOUT
);
642 if (test_bit(STATUS_HCMD_ACTIVE
, &priv
->status
)) {
643 IWL_ERROR("Error sending %s: time out after %dms.\n",
644 get_cmd_string(cmd
->id
),
645 jiffies_to_msecs(HOST_COMPLETE_TIMEOUT
));
647 clear_bit(STATUS_HCMD_ACTIVE
, &priv
->status
);
653 if (test_bit(STATUS_RF_KILL_HW
, &priv
->status
)) {
654 IWL_DEBUG_INFO("Command %s aborted: RF KILL Switch\n",
655 get_cmd_string(cmd
->id
));
659 if (test_bit(STATUS_FW_ERROR
, &priv
->status
)) {
660 IWL_DEBUG_INFO("Command %s failed: FW Error\n",
661 get_cmd_string(cmd
->id
));
665 if ((cmd
->meta
.flags
& CMD_WANT_SKB
) && !cmd
->meta
.u
.skb
) {
666 IWL_ERROR("Error: Response NULL in '%s'\n",
667 get_cmd_string(cmd
->id
));
676 if (cmd
->meta
.flags
& CMD_WANT_SKB
) {
677 struct iwl3945_cmd
*qcmd
;
679 /* Cancel the CMD_WANT_SKB flag for the cmd in the
680 * TX cmd queue. Otherwise in case the cmd comes
681 * in later, it will possibly set an invalid
682 * address (cmd->meta.source). */
683 qcmd
= &priv
->txq
[IWL_CMD_QUEUE_NUM
].cmd
[cmd_idx
];
684 qcmd
->meta
.flags
&= ~CMD_WANT_SKB
;
687 if (cmd
->meta
.u
.skb
) {
688 dev_kfree_skb_any(cmd
->meta
.u
.skb
);
689 cmd
->meta
.u
.skb
= NULL
;
692 clear_bit(STATUS_HCMD_SYNC_ACTIVE
, &priv
->status
);
696 int iwl3945_send_cmd(struct iwl3945_priv
*priv
, struct iwl3945_host_cmd
*cmd
)
698 if (cmd
->meta
.flags
& CMD_ASYNC
)
699 return iwl3945_send_cmd_async(priv
, cmd
);
701 return iwl3945_send_cmd_sync(priv
, cmd
);
704 int iwl3945_send_cmd_pdu(struct iwl3945_priv
*priv
, u8 id
, u16 len
, const void *data
)
706 struct iwl3945_host_cmd cmd
= {
712 return iwl3945_send_cmd_sync(priv
, &cmd
);
715 static int __must_check
iwl3945_send_cmd_u32(struct iwl3945_priv
*priv
, u8 id
, u32 val
)
717 struct iwl3945_host_cmd cmd
= {
723 return iwl3945_send_cmd_sync(priv
, &cmd
);
726 int iwl3945_send_statistics_request(struct iwl3945_priv
*priv
)
728 return iwl3945_send_cmd_u32(priv
, REPLY_STATISTICS_CMD
, 0);
732 * iwl3945_set_rxon_channel - Set the phymode and channel values in staging RXON
733 * @band: 2.4 or 5 GHz band
734 * @channel: Any channel valid for the requested band
736 * In addition to setting the staging RXON, priv->band is also set.
738 * NOTE: Does not commit to the hardware; it sets appropriate bit fields
739 * in the staging RXON flag structure based on the band
741 static int iwl3945_set_rxon_channel(struct iwl3945_priv
*priv
,
742 enum ieee80211_band band
,
745 if (!iwl3945_get_channel_info(priv
, band
, channel
)) {
746 IWL_DEBUG_INFO("Could not set channel to %d [%d]\n",
751 if ((le16_to_cpu(priv
->staging_rxon
.channel
) == channel
) &&
752 (priv
->band
== band
))
755 priv
->staging_rxon
.channel
= cpu_to_le16(channel
);
756 if (band
== IEEE80211_BAND_5GHZ
)
757 priv
->staging_rxon
.flags
&= ~RXON_FLG_BAND_24G_MSK
;
759 priv
->staging_rxon
.flags
|= RXON_FLG_BAND_24G_MSK
;
763 IWL_DEBUG_INFO("Staging channel set to %d [%d]\n", channel
, band
);
769 * iwl3945_check_rxon_cmd - validate RXON structure is valid
771 * NOTE: This is really only useful during development and can eventually
772 * be #ifdef'd out once the driver is stable and folks aren't actively
775 static int iwl3945_check_rxon_cmd(struct iwl3945_priv
*priv
)
779 struct iwl3945_rxon_cmd
*rxon
= &priv
->staging_rxon
;
781 if (rxon
->flags
& RXON_FLG_BAND_24G_MSK
) {
782 error
|= le32_to_cpu(rxon
->flags
&
783 (RXON_FLG_TGJ_NARROW_BAND_MSK
|
784 RXON_FLG_RADAR_DETECT_MSK
));
786 IWL_WARNING("check 24G fields %d | %d\n",
789 error
|= (rxon
->flags
& RXON_FLG_SHORT_SLOT_MSK
) ?
790 0 : le32_to_cpu(RXON_FLG_SHORT_SLOT_MSK
);
792 IWL_WARNING("check 52 fields %d | %d\n",
794 error
|= le32_to_cpu(rxon
->flags
& RXON_FLG_CCK_MSK
);
796 IWL_WARNING("check 52 CCK %d | %d\n",
799 error
|= (rxon
->node_addr
[0] | rxon
->bssid_addr
[0]) & 0x1;
801 IWL_WARNING("check mac addr %d | %d\n", counter
++, error
);
803 /* make sure basic rates 6Mbps and 1Mbps are supported */
804 error
|= (((rxon
->ofdm_basic_rates
& IWL_RATE_6M_MASK
) == 0) &&
805 ((rxon
->cck_basic_rates
& IWL_RATE_1M_MASK
) == 0));
807 IWL_WARNING("check basic rate %d | %d\n", counter
++, error
);
809 error
|= (le16_to_cpu(rxon
->assoc_id
) > 2007);
811 IWL_WARNING("check assoc id %d | %d\n", counter
++, error
);
813 error
|= ((rxon
->flags
& (RXON_FLG_CCK_MSK
| RXON_FLG_SHORT_SLOT_MSK
))
814 == (RXON_FLG_CCK_MSK
| RXON_FLG_SHORT_SLOT_MSK
));
816 IWL_WARNING("check CCK and short slot %d | %d\n",
819 error
|= ((rxon
->flags
& (RXON_FLG_CCK_MSK
| RXON_FLG_AUTO_DETECT_MSK
))
820 == (RXON_FLG_CCK_MSK
| RXON_FLG_AUTO_DETECT_MSK
));
822 IWL_WARNING("check CCK & auto detect %d | %d\n",
825 error
|= ((rxon
->flags
& (RXON_FLG_AUTO_DETECT_MSK
|
826 RXON_FLG_TGG_PROTECT_MSK
)) == RXON_FLG_TGG_PROTECT_MSK
);
828 IWL_WARNING("check TGG and auto detect %d | %d\n",
831 if ((rxon
->flags
& RXON_FLG_DIS_DIV_MSK
))
832 error
|= ((rxon
->flags
& (RXON_FLG_ANT_B_MSK
|
833 RXON_FLG_ANT_A_MSK
)) == 0);
835 IWL_WARNING("check antenna %d %d\n", counter
++, error
);
838 IWL_WARNING("Tuning to channel %d\n",
839 le16_to_cpu(rxon
->channel
));
842 IWL_ERROR("Not a valid iwl3945_rxon_assoc_cmd field values\n");
849 * iwl3945_full_rxon_required - check if full RXON (vs RXON_ASSOC) cmd is needed
850 * @priv: staging_rxon is compared to active_rxon
852 * If the RXON structure is changing enough to require a new tune,
853 * or is clearing the RXON_FILTER_ASSOC_MSK, then return 1 to indicate that
854 * a new tune (full RXON command, rather than RXON_ASSOC cmd) is required.
856 static int iwl3945_full_rxon_required(struct iwl3945_priv
*priv
)
859 /* These items are only settable from the full RXON command */
860 if (!(iwl3945_is_associated(priv
)) ||
861 compare_ether_addr(priv
->staging_rxon
.bssid_addr
,
862 priv
->active_rxon
.bssid_addr
) ||
863 compare_ether_addr(priv
->staging_rxon
.node_addr
,
864 priv
->active_rxon
.node_addr
) ||
865 compare_ether_addr(priv
->staging_rxon
.wlap_bssid_addr
,
866 priv
->active_rxon
.wlap_bssid_addr
) ||
867 (priv
->staging_rxon
.dev_type
!= priv
->active_rxon
.dev_type
) ||
868 (priv
->staging_rxon
.channel
!= priv
->active_rxon
.channel
) ||
869 (priv
->staging_rxon
.air_propagation
!=
870 priv
->active_rxon
.air_propagation
) ||
871 (priv
->staging_rxon
.assoc_id
!= priv
->active_rxon
.assoc_id
))
874 /* flags, filter_flags, ofdm_basic_rates, and cck_basic_rates can
875 * be updated with the RXON_ASSOC command -- however only some
876 * flag transitions are allowed using RXON_ASSOC */
878 /* Check if we are not switching bands */
879 if ((priv
->staging_rxon
.flags
& RXON_FLG_BAND_24G_MSK
) !=
880 (priv
->active_rxon
.flags
& RXON_FLG_BAND_24G_MSK
))
883 /* Check if we are switching association toggle */
884 if ((priv
->staging_rxon
.filter_flags
& RXON_FILTER_ASSOC_MSK
) !=
885 (priv
->active_rxon
.filter_flags
& RXON_FILTER_ASSOC_MSK
))
891 static int iwl3945_send_rxon_assoc(struct iwl3945_priv
*priv
)
894 struct iwl_rx_packet
*res
= NULL
;
895 struct iwl3945_rxon_assoc_cmd rxon_assoc
;
896 struct iwl3945_host_cmd cmd
= {
897 .id
= REPLY_RXON_ASSOC
,
898 .len
= sizeof(rxon_assoc
),
899 .meta
.flags
= CMD_WANT_SKB
,
902 const struct iwl3945_rxon_cmd
*rxon1
= &priv
->staging_rxon
;
903 const struct iwl3945_rxon_cmd
*rxon2
= &priv
->active_rxon
;
905 if ((rxon1
->flags
== rxon2
->flags
) &&
906 (rxon1
->filter_flags
== rxon2
->filter_flags
) &&
907 (rxon1
->cck_basic_rates
== rxon2
->cck_basic_rates
) &&
908 (rxon1
->ofdm_basic_rates
== rxon2
->ofdm_basic_rates
)) {
909 IWL_DEBUG_INFO("Using current RXON_ASSOC. Not resending.\n");
913 rxon_assoc
.flags
= priv
->staging_rxon
.flags
;
914 rxon_assoc
.filter_flags
= priv
->staging_rxon
.filter_flags
;
915 rxon_assoc
.ofdm_basic_rates
= priv
->staging_rxon
.ofdm_basic_rates
;
916 rxon_assoc
.cck_basic_rates
= priv
->staging_rxon
.cck_basic_rates
;
917 rxon_assoc
.reserved
= 0;
919 rc
= iwl3945_send_cmd_sync(priv
, &cmd
);
923 res
= (struct iwl_rx_packet
*)cmd
.meta
.u
.skb
->data
;
924 if (res
->hdr
.flags
& IWL_CMD_FAILED_MSK
) {
925 IWL_ERROR("Bad return from REPLY_RXON_ASSOC command\n");
929 priv
->alloc_rxb_skb
--;
930 dev_kfree_skb_any(cmd
.meta
.u
.skb
);
936 * iwl3945_commit_rxon - commit staging_rxon to hardware
938 * The RXON command in staging_rxon is committed to the hardware and
939 * the active_rxon structure is updated with the new data. This
940 * function correctly transitions out of the RXON_ASSOC_MSK state if
941 * a HW tune is required based on the RXON structure changes.
943 static int iwl3945_commit_rxon(struct iwl3945_priv
*priv
)
945 /* cast away the const for active_rxon in this function */
946 struct iwl3945_rxon_cmd
*active_rxon
= (void *)&priv
->active_rxon
;
949 if (!iwl3945_is_alive(priv
))
952 /* always get timestamp with Rx frame */
953 priv
->staging_rxon
.flags
|= RXON_FLG_TSF2HOST_MSK
;
956 priv
->staging_rxon
.flags
&=
957 ~(RXON_FLG_DIS_DIV_MSK
| RXON_FLG_ANT_SEL_MSK
);
958 priv
->staging_rxon
.flags
|= iwl3945_get_antenna_flags(priv
);
960 rc
= iwl3945_check_rxon_cmd(priv
);
962 IWL_ERROR("Invalid RXON configuration. Not committing.\n");
966 /* If we don't need to send a full RXON, we can use
967 * iwl3945_rxon_assoc_cmd which is used to reconfigure filter
968 * and other flags for the current radio configuration. */
969 if (!iwl3945_full_rxon_required(priv
)) {
970 rc
= iwl3945_send_rxon_assoc(priv
);
972 IWL_ERROR("Error setting RXON_ASSOC "
973 "configuration (%d).\n", rc
);
977 memcpy(active_rxon
, &priv
->staging_rxon
, sizeof(*active_rxon
));
982 /* If we are currently associated and the new config requires
983 * an RXON_ASSOC and the new config wants the associated mask enabled,
984 * we must clear the associated from the active configuration
985 * before we apply the new config */
986 if (iwl3945_is_associated(priv
) &&
987 (priv
->staging_rxon
.filter_flags
& RXON_FILTER_ASSOC_MSK
)) {
988 IWL_DEBUG_INFO("Toggling associated bit on current RXON\n");
989 active_rxon
->filter_flags
&= ~RXON_FILTER_ASSOC_MSK
;
991 rc
= iwl3945_send_cmd_pdu(priv
, REPLY_RXON
,
992 sizeof(struct iwl3945_rxon_cmd
),
995 /* If the mask clearing failed then we set
996 * active_rxon back to what it was previously */
998 active_rxon
->filter_flags
|= RXON_FILTER_ASSOC_MSK
;
999 IWL_ERROR("Error clearing ASSOC_MSK on current "
1000 "configuration (%d).\n", rc
);
1005 IWL_DEBUG_INFO("Sending RXON\n"
1006 "* with%s RXON_FILTER_ASSOC_MSK\n"
1009 ((priv
->staging_rxon
.filter_flags
&
1010 RXON_FILTER_ASSOC_MSK
) ? "" : "out"),
1011 le16_to_cpu(priv
->staging_rxon
.channel
),
1012 priv
->staging_rxon
.bssid_addr
);
1014 /* Apply the new configuration */
1015 rc
= iwl3945_send_cmd_pdu(priv
, REPLY_RXON
,
1016 sizeof(struct iwl3945_rxon_cmd
), &priv
->staging_rxon
);
1018 IWL_ERROR("Error setting new configuration (%d).\n", rc
);
1022 memcpy(active_rxon
, &priv
->staging_rxon
, sizeof(*active_rxon
));
1024 iwl3945_clear_stations_table(priv
);
1026 /* If we issue a new RXON command which required a tune then we must
1027 * send a new TXPOWER command or we won't be able to Tx any frames */
1028 rc
= iwl3945_hw_reg_send_txpower(priv
);
1030 IWL_ERROR("Error setting Tx power (%d).\n", rc
);
1034 /* Add the broadcast address so we can send broadcast frames */
1035 if (iwl3945_add_station(priv
, iwl3945_broadcast_addr
, 0, 0) ==
1036 IWL_INVALID_STATION
) {
1037 IWL_ERROR("Error adding BROADCAST address for transmit.\n");
1041 /* If we have set the ASSOC_MSK and we are in BSS mode then
1042 * add the IWL_AP_ID to the station rate table */
1043 if (iwl3945_is_associated(priv
) &&
1044 (priv
->iw_mode
== NL80211_IFTYPE_STATION
))
1045 if (iwl3945_add_station(priv
, priv
->active_rxon
.bssid_addr
, 1, 0)
1046 == IWL_INVALID_STATION
) {
1047 IWL_ERROR("Error adding AP address for transmit.\n");
1051 /* Init the hardware's rate fallback order based on the band */
1052 rc
= iwl3945_init_hw_rate_table(priv
);
1054 IWL_ERROR("Error setting HW rate table: %02X\n", rc
);
1061 static int iwl3945_send_bt_config(struct iwl3945_priv
*priv
)
1063 struct iwl_bt_cmd bt_cmd
= {
1071 return iwl3945_send_cmd_pdu(priv
, REPLY_BT_CONFIG
,
1072 sizeof(bt_cmd
), &bt_cmd
);
1075 static int iwl3945_send_scan_abort(struct iwl3945_priv
*priv
)
1078 struct iwl_rx_packet
*res
;
1079 struct iwl3945_host_cmd cmd
= {
1080 .id
= REPLY_SCAN_ABORT_CMD
,
1081 .meta
.flags
= CMD_WANT_SKB
,
1084 /* If there isn't a scan actively going on in the hardware
1085 * then we are in between scan bands and not actually
1086 * actively scanning, so don't send the abort command */
1087 if (!test_bit(STATUS_SCAN_HW
, &priv
->status
)) {
1088 clear_bit(STATUS_SCAN_ABORTING
, &priv
->status
);
1092 rc
= iwl3945_send_cmd_sync(priv
, &cmd
);
1094 clear_bit(STATUS_SCAN_ABORTING
, &priv
->status
);
1098 res
= (struct iwl_rx_packet
*)cmd
.meta
.u
.skb
->data
;
1099 if (res
->u
.status
!= CAN_ABORT_STATUS
) {
1100 /* The scan abort will return 1 for success or
1101 * 2 for "failure". A failure condition can be
1102 * due to simply not being in an active scan which
1103 * can occur if we send the scan abort before we
1104 * the microcode has notified us that a scan is
1106 IWL_DEBUG_INFO("SCAN_ABORT returned %d.\n", res
->u
.status
);
1107 clear_bit(STATUS_SCAN_ABORTING
, &priv
->status
);
1108 clear_bit(STATUS_SCAN_HW
, &priv
->status
);
1111 dev_kfree_skb_any(cmd
.meta
.u
.skb
);
1116 static int iwl3945_card_state_sync_callback(struct iwl3945_priv
*priv
,
1117 struct iwl3945_cmd
*cmd
,
1118 struct sk_buff
*skb
)
1126 * Use: Sets the device's internal card state to enable, disable, or halt
1128 * When in the 'enable' state the card operates as normal.
1129 * When in the 'disable' state, the card enters into a low power mode.
1130 * When in the 'halt' state, the card is shut down and must be fully
1131 * restarted to come back on.
1133 static int iwl3945_send_card_state(struct iwl3945_priv
*priv
, u32 flags
, u8 meta_flag
)
1135 struct iwl3945_host_cmd cmd
= {
1136 .id
= REPLY_CARD_STATE_CMD
,
1139 .meta
.flags
= meta_flag
,
1142 if (meta_flag
& CMD_ASYNC
)
1143 cmd
.meta
.u
.callback
= iwl3945_card_state_sync_callback
;
1145 return iwl3945_send_cmd(priv
, &cmd
);
1148 static int iwl3945_add_sta_sync_callback(struct iwl3945_priv
*priv
,
1149 struct iwl3945_cmd
*cmd
, struct sk_buff
*skb
)
1151 struct iwl_rx_packet
*res
= NULL
;
1154 IWL_ERROR("Error: Response NULL in REPLY_ADD_STA.\n");
1158 res
= (struct iwl_rx_packet
*)skb
->data
;
1159 if (res
->hdr
.flags
& IWL_CMD_FAILED_MSK
) {
1160 IWL_ERROR("Bad return from REPLY_ADD_STA (0x%08X)\n",
1165 switch (res
->u
.add_sta
.status
) {
1166 case ADD_STA_SUCCESS_MSK
:
1172 /* We didn't cache the SKB; let the caller free it */
1176 int iwl3945_send_add_station(struct iwl3945_priv
*priv
,
1177 struct iwl3945_addsta_cmd
*sta
, u8 flags
)
1179 struct iwl_rx_packet
*res
= NULL
;
1181 struct iwl3945_host_cmd cmd
= {
1182 .id
= REPLY_ADD_STA
,
1183 .len
= sizeof(struct iwl3945_addsta_cmd
),
1184 .meta
.flags
= flags
,
1188 if (flags
& CMD_ASYNC
)
1189 cmd
.meta
.u
.callback
= iwl3945_add_sta_sync_callback
;
1191 cmd
.meta
.flags
|= CMD_WANT_SKB
;
1193 rc
= iwl3945_send_cmd(priv
, &cmd
);
1195 if (rc
|| (flags
& CMD_ASYNC
))
1198 res
= (struct iwl_rx_packet
*)cmd
.meta
.u
.skb
->data
;
1199 if (res
->hdr
.flags
& IWL_CMD_FAILED_MSK
) {
1200 IWL_ERROR("Bad return from REPLY_ADD_STA (0x%08X)\n",
1206 switch (res
->u
.add_sta
.status
) {
1207 case ADD_STA_SUCCESS_MSK
:
1208 IWL_DEBUG_INFO("REPLY_ADD_STA PASSED\n");
1212 IWL_WARNING("REPLY_ADD_STA failed\n");
1217 priv
->alloc_rxb_skb
--;
1218 dev_kfree_skb_any(cmd
.meta
.u
.skb
);
1223 static int iwl3945_update_sta_key_info(struct iwl3945_priv
*priv
,
1224 struct ieee80211_key_conf
*keyconf
,
1227 unsigned long flags
;
1228 __le16 key_flags
= 0;
1230 switch (keyconf
->alg
) {
1232 key_flags
|= STA_KEY_FLG_CCMP
;
1233 key_flags
|= cpu_to_le16(
1234 keyconf
->keyidx
<< STA_KEY_FLG_KEYID_POS
);
1235 key_flags
&= ~STA_KEY_FLG_INVALID
;
1242 spin_lock_irqsave(&priv
->sta_lock
, flags
);
1243 priv
->stations
[sta_id
].keyinfo
.alg
= keyconf
->alg
;
1244 priv
->stations
[sta_id
].keyinfo
.keylen
= keyconf
->keylen
;
1245 memcpy(priv
->stations
[sta_id
].keyinfo
.key
, keyconf
->key
,
1248 memcpy(priv
->stations
[sta_id
].sta
.key
.key
, keyconf
->key
,
1250 priv
->stations
[sta_id
].sta
.key
.key_flags
= key_flags
;
1251 priv
->stations
[sta_id
].sta
.sta
.modify_mask
= STA_MODIFY_KEY_MASK
;
1252 priv
->stations
[sta_id
].sta
.mode
= STA_CONTROL_MODIFY_MSK
;
1254 spin_unlock_irqrestore(&priv
->sta_lock
, flags
);
1256 IWL_DEBUG_INFO("hwcrypto: modify ucode station key info\n");
1257 iwl3945_send_add_station(priv
, &priv
->stations
[sta_id
].sta
, 0);
1261 static int iwl3945_clear_sta_key_info(struct iwl3945_priv
*priv
, u8 sta_id
)
1263 unsigned long flags
;
1265 spin_lock_irqsave(&priv
->sta_lock
, flags
);
1266 memset(&priv
->stations
[sta_id
].keyinfo
, 0, sizeof(struct iwl3945_hw_key
));
1267 memset(&priv
->stations
[sta_id
].sta
.key
, 0,
1268 sizeof(struct iwl4965_keyinfo
));
1269 priv
->stations
[sta_id
].sta
.key
.key_flags
= STA_KEY_FLG_NO_ENC
;
1270 priv
->stations
[sta_id
].sta
.sta
.modify_mask
= STA_MODIFY_KEY_MASK
;
1271 priv
->stations
[sta_id
].sta
.mode
= STA_CONTROL_MODIFY_MSK
;
1272 spin_unlock_irqrestore(&priv
->sta_lock
, flags
);
1274 IWL_DEBUG_INFO("hwcrypto: clear ucode station key info\n");
1275 iwl3945_send_add_station(priv
, &priv
->stations
[sta_id
].sta
, 0);
1279 static void iwl3945_clear_free_frames(struct iwl3945_priv
*priv
)
1281 struct list_head
*element
;
1283 IWL_DEBUG_INFO("%d frames on pre-allocated heap on clear.\n",
1284 priv
->frames_count
);
1286 while (!list_empty(&priv
->free_frames
)) {
1287 element
= priv
->free_frames
.next
;
1289 kfree(list_entry(element
, struct iwl3945_frame
, list
));
1290 priv
->frames_count
--;
1293 if (priv
->frames_count
) {
1294 IWL_WARNING("%d frames still in use. Did we lose one?\n",
1295 priv
->frames_count
);
1296 priv
->frames_count
= 0;
1300 static struct iwl3945_frame
*iwl3945_get_free_frame(struct iwl3945_priv
*priv
)
1302 struct iwl3945_frame
*frame
;
1303 struct list_head
*element
;
1304 if (list_empty(&priv
->free_frames
)) {
1305 frame
= kzalloc(sizeof(*frame
), GFP_KERNEL
);
1307 IWL_ERROR("Could not allocate frame!\n");
1311 priv
->frames_count
++;
1315 element
= priv
->free_frames
.next
;
1317 return list_entry(element
, struct iwl3945_frame
, list
);
1320 static void iwl3945_free_frame(struct iwl3945_priv
*priv
, struct iwl3945_frame
*frame
)
1322 memset(frame
, 0, sizeof(*frame
));
1323 list_add(&frame
->list
, &priv
->free_frames
);
1326 unsigned int iwl3945_fill_beacon_frame(struct iwl3945_priv
*priv
,
1327 struct ieee80211_hdr
*hdr
,
1331 if (!iwl3945_is_associated(priv
) || !priv
->ibss_beacon
||
1332 ((priv
->iw_mode
!= NL80211_IFTYPE_ADHOC
) &&
1333 (priv
->iw_mode
!= NL80211_IFTYPE_AP
)))
1336 if (priv
->ibss_beacon
->len
> left
)
1339 memcpy(hdr
, priv
->ibss_beacon
->data
, priv
->ibss_beacon
->len
);
1341 return priv
->ibss_beacon
->len
;
1344 static u8
iwl3945_rate_get_lowest_plcp(struct iwl3945_priv
*priv
)
1350 if (priv
->staging_rxon
.flags
& RXON_FLG_BAND_24G_MSK
)
1351 rate_mask
= priv
->active_rate_basic
& IWL_CCK_RATES_MASK
;
1353 rate_mask
= priv
->active_rate_basic
& IWL_OFDM_RATES_MASK
;
1355 for (i
= IWL_RATE_1M_INDEX
; i
!= IWL_RATE_INVALID
;
1356 i
= iwl3945_rates
[i
].next_ieee
) {
1357 if (rate_mask
& (1 << i
))
1358 return iwl3945_rates
[i
].plcp
;
1361 /* No valid rate was found. Assign the lowest one */
1362 if (priv
->staging_rxon
.flags
& RXON_FLG_BAND_24G_MSK
)
1363 return IWL_RATE_1M_PLCP
;
1365 return IWL_RATE_6M_PLCP
;
1368 static int iwl3945_send_beacon_cmd(struct iwl3945_priv
*priv
)
1370 struct iwl3945_frame
*frame
;
1371 unsigned int frame_size
;
1375 frame
= iwl3945_get_free_frame(priv
);
1378 IWL_ERROR("Could not obtain free frame buffer for beacon "
1383 rate
= iwl3945_rate_get_lowest_plcp(priv
);
1385 frame_size
= iwl3945_hw_get_beacon_cmd(priv
, frame
, rate
);
1387 rc
= iwl3945_send_cmd_pdu(priv
, REPLY_TX_BEACON
, frame_size
,
1390 iwl3945_free_frame(priv
, frame
);
1395 /******************************************************************************
1397 * EEPROM related functions
1399 ******************************************************************************/
1401 static void get_eeprom_mac(struct iwl3945_priv
*priv
, u8
*mac
)
1403 memcpy(mac
, priv
->eeprom
.mac_address
, 6);
1407 * Clear the OWNER_MSK, to establish driver (instead of uCode running on
1408 * embedded controller) as EEPROM reader; each read is a series of pulses
1409 * to/from the EEPROM chip, not a single event, so even reads could conflict
1410 * if they weren't arbitrated by some ownership mechanism. Here, the driver
1411 * simply claims ownership, which should be safe when this function is called
1412 * (i.e. before loading uCode!).
1414 static inline int iwl3945_eeprom_acquire_semaphore(struct iwl3945_priv
*priv
)
1416 _iwl3945_clear_bit(priv
, CSR_EEPROM_GP
, CSR_EEPROM_GP_IF_OWNER_MSK
);
1421 * iwl3945_eeprom_init - read EEPROM contents
1423 * Load the EEPROM contents from adapter into priv->eeprom
1425 * NOTE: This routine uses the non-debug IO access functions.
1427 int iwl3945_eeprom_init(struct iwl3945_priv
*priv
)
1429 u16
*e
= (u16
*)&priv
->eeprom
;
1430 u32 gp
= iwl3945_read32(priv
, CSR_EEPROM_GP
);
1431 int sz
= sizeof(priv
->eeprom
);
1435 /* The EEPROM structure has several padding buffers within it
1436 * and when adding new EEPROM maps is subject to programmer errors
1437 * which may be very difficult to identify without explicitly
1438 * checking the resulting size of the eeprom map. */
1439 BUILD_BUG_ON(sizeof(priv
->eeprom
) != IWL_EEPROM_IMAGE_SIZE
);
1441 if ((gp
& CSR_EEPROM_GP_VALID_MSK
) == CSR_EEPROM_GP_BAD_SIGNATURE
) {
1442 IWL_ERROR("EEPROM not found, EEPROM_GP=0x%08x\n", gp
);
1446 /* Make sure driver (instead of uCode) is allowed to read EEPROM */
1447 ret
= iwl3945_eeprom_acquire_semaphore(priv
);
1449 IWL_ERROR("Failed to acquire EEPROM semaphore.\n");
1453 /* eeprom is an array of 16bit values */
1454 for (addr
= 0; addr
< sz
; addr
+= sizeof(u16
)) {
1457 _iwl3945_write32(priv
, CSR_EEPROM_REG
,
1458 CSR_EEPROM_REG_MSK_ADDR
& (addr
<< 1));
1459 _iwl3945_clear_bit(priv
, CSR_EEPROM_REG
, CSR_EEPROM_REG_BIT_CMD
);
1460 ret
= iwl3945_poll_direct_bit(priv
, CSR_EEPROM_REG
,
1461 CSR_EEPROM_REG_READ_VALID_MSK
,
1462 IWL_EEPROM_ACCESS_TIMEOUT
);
1464 IWL_ERROR("Time out reading EEPROM[%d]\n", addr
);
1468 r
= _iwl3945_read_direct32(priv
, CSR_EEPROM_REG
);
1469 e
[addr
/ 2] = le16_to_cpu((__force __le16
)(r
>> 16));
1475 static void iwl3945_unset_hw_setting(struct iwl3945_priv
*priv
)
1477 if (priv
->hw_setting
.shared_virt
)
1478 pci_free_consistent(priv
->pci_dev
,
1479 sizeof(struct iwl3945_shared
),
1480 priv
->hw_setting
.shared_virt
,
1481 priv
->hw_setting
.shared_phys
);
1485 * iwl3945_supported_rate_to_ie - fill in the supported rate in IE field
1487 * return : set the bit for each supported rate insert in ie
1489 static u16
iwl3945_supported_rate_to_ie(u8
*ie
, u16 supported_rate
,
1490 u16 basic_rate
, int *left
)
1492 u16 ret_rates
= 0, bit
;
1497 for (bit
= 1, i
= 0; i
< IWL_RATE_COUNT
; i
++, bit
<<= 1) {
1498 if (bit
& supported_rate
) {
1500 rates
[*cnt
] = iwl3945_rates
[i
].ieee
|
1501 ((bit
& basic_rate
) ? 0x80 : 0x00);
1505 (*cnt
>= IWL_SUPPORTED_RATES_IE_LEN
))
1514 * iwl3945_fill_probe_req - fill in all required fields and IE for probe request
1516 static u16
iwl3945_fill_probe_req(struct iwl3945_priv
*priv
,
1517 struct ieee80211_mgmt
*frame
,
1522 u16 active_rates
, ret_rates
, cck_rates
;
1524 /* Make sure there is enough space for the probe request,
1525 * two mandatory IEs and the data */
1531 frame
->frame_control
= cpu_to_le16(IEEE80211_STYPE_PROBE_REQ
);
1532 memcpy(frame
->da
, iwl3945_broadcast_addr
, ETH_ALEN
);
1533 memcpy(frame
->sa
, priv
->mac_addr
, ETH_ALEN
);
1534 memcpy(frame
->bssid
, iwl3945_broadcast_addr
, ETH_ALEN
);
1535 frame
->seq_ctrl
= 0;
1537 /* fill in our indirect SSID IE */
1544 pos
= &(frame
->u
.probe_req
.variable
[0]);
1545 *pos
++ = WLAN_EID_SSID
;
1548 /* fill in supported rate */
1554 /* ... fill it in... */
1555 *pos
++ = WLAN_EID_SUPP_RATES
;
1558 priv
->active_rate
= priv
->rates_mask
;
1559 active_rates
= priv
->active_rate
;
1560 priv
->active_rate_basic
= priv
->rates_mask
& IWL_BASIC_RATES_MASK
;
1562 cck_rates
= IWL_CCK_RATES_MASK
& active_rates
;
1563 ret_rates
= iwl3945_supported_rate_to_ie(pos
, cck_rates
,
1564 priv
->active_rate_basic
, &left
);
1565 active_rates
&= ~ret_rates
;
1567 ret_rates
= iwl3945_supported_rate_to_ie(pos
, active_rates
,
1568 priv
->active_rate_basic
, &left
);
1569 active_rates
&= ~ret_rates
;
1573 if (active_rates
== 0)
1576 /* fill in supported extended rate */
1581 /* ... fill it in... */
1582 *pos
++ = WLAN_EID_EXT_SUPP_RATES
;
1584 iwl3945_supported_rate_to_ie(pos
, active_rates
,
1585 priv
->active_rate_basic
, &left
);
1596 static int iwl3945_send_qos_params_command(struct iwl3945_priv
*priv
,
1597 struct iwl_qosparam_cmd
*qos
)
1600 return iwl3945_send_cmd_pdu(priv
, REPLY_QOS_PARAM
,
1601 sizeof(struct iwl_qosparam_cmd
), qos
);
1604 static void iwl3945_reset_qos(struct iwl3945_priv
*priv
)
1610 unsigned long flags
;
1613 spin_lock_irqsave(&priv
->lock
, flags
);
1614 priv
->qos_data
.qos_active
= 0;
1616 /* QoS always active in AP and ADHOC mode
1617 * In STA mode wait for association
1619 if (priv
->iw_mode
== NL80211_IFTYPE_ADHOC
||
1620 priv
->iw_mode
== NL80211_IFTYPE_AP
)
1621 priv
->qos_data
.qos_active
= 1;
1623 priv
->qos_data
.qos_active
= 0;
1626 /* check for legacy mode */
1627 if ((priv
->iw_mode
== NL80211_IFTYPE_ADHOC
&&
1628 (priv
->active_rate
& IWL_OFDM_RATES_MASK
) == 0) ||
1629 (priv
->iw_mode
== NL80211_IFTYPE_STATION
&&
1630 (priv
->staging_rxon
.flags
& RXON_FLG_SHORT_SLOT_MSK
) == 0)) {
1635 if (priv
->qos_data
.qos_active
)
1638 priv
->qos_data
.def_qos_parm
.ac
[0].cw_min
= cpu_to_le16(cw_min
);
1639 priv
->qos_data
.def_qos_parm
.ac
[0].cw_max
= cpu_to_le16(cw_max
);
1640 priv
->qos_data
.def_qos_parm
.ac
[0].aifsn
= aifs
;
1641 priv
->qos_data
.def_qos_parm
.ac
[0].edca_txop
= 0;
1642 priv
->qos_data
.def_qos_parm
.ac
[0].reserved1
= 0;
1644 if (priv
->qos_data
.qos_active
) {
1646 priv
->qos_data
.def_qos_parm
.ac
[i
].cw_min
= cpu_to_le16(cw_min
);
1647 priv
->qos_data
.def_qos_parm
.ac
[i
].cw_max
= cpu_to_le16(cw_max
);
1648 priv
->qos_data
.def_qos_parm
.ac
[i
].aifsn
= 7;
1649 priv
->qos_data
.def_qos_parm
.ac
[i
].edca_txop
= 0;
1650 priv
->qos_data
.def_qos_parm
.ac
[i
].reserved1
= 0;
1653 priv
->qos_data
.def_qos_parm
.ac
[i
].cw_min
=
1654 cpu_to_le16((cw_min
+ 1) / 2 - 1);
1655 priv
->qos_data
.def_qos_parm
.ac
[i
].cw_max
=
1656 cpu_to_le16(cw_max
);
1657 priv
->qos_data
.def_qos_parm
.ac
[i
].aifsn
= 2;
1659 priv
->qos_data
.def_qos_parm
.ac
[i
].edca_txop
=
1662 priv
->qos_data
.def_qos_parm
.ac
[i
].edca_txop
=
1664 priv
->qos_data
.def_qos_parm
.ac
[i
].reserved1
= 0;
1667 priv
->qos_data
.def_qos_parm
.ac
[i
].cw_min
=
1668 cpu_to_le16((cw_min
+ 1) / 4 - 1);
1669 priv
->qos_data
.def_qos_parm
.ac
[i
].cw_max
=
1670 cpu_to_le16((cw_max
+ 1) / 2 - 1);
1671 priv
->qos_data
.def_qos_parm
.ac
[i
].aifsn
= 2;
1672 priv
->qos_data
.def_qos_parm
.ac
[i
].reserved1
= 0;
1674 priv
->qos_data
.def_qos_parm
.ac
[i
].edca_txop
=
1677 priv
->qos_data
.def_qos_parm
.ac
[i
].edca_txop
=
1680 for (i
= 1; i
< 4; i
++) {
1681 priv
->qos_data
.def_qos_parm
.ac
[i
].cw_min
=
1682 cpu_to_le16(cw_min
);
1683 priv
->qos_data
.def_qos_parm
.ac
[i
].cw_max
=
1684 cpu_to_le16(cw_max
);
1685 priv
->qos_data
.def_qos_parm
.ac
[i
].aifsn
= aifs
;
1686 priv
->qos_data
.def_qos_parm
.ac
[i
].edca_txop
= 0;
1687 priv
->qos_data
.def_qos_parm
.ac
[i
].reserved1
= 0;
1690 IWL_DEBUG_QOS("set QoS to default \n");
1692 spin_unlock_irqrestore(&priv
->lock
, flags
);
1695 static void iwl3945_activate_qos(struct iwl3945_priv
*priv
, u8 force
)
1697 unsigned long flags
;
1699 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
1702 spin_lock_irqsave(&priv
->lock
, flags
);
1703 priv
->qos_data
.def_qos_parm
.qos_flags
= 0;
1705 if (priv
->qos_data
.qos_cap
.q_AP
.queue_request
&&
1706 !priv
->qos_data
.qos_cap
.q_AP
.txop_request
)
1707 priv
->qos_data
.def_qos_parm
.qos_flags
|=
1708 QOS_PARAM_FLG_TXOP_TYPE_MSK
;
1710 if (priv
->qos_data
.qos_active
)
1711 priv
->qos_data
.def_qos_parm
.qos_flags
|=
1712 QOS_PARAM_FLG_UPDATE_EDCA_MSK
;
1714 spin_unlock_irqrestore(&priv
->lock
, flags
);
1716 if (force
|| iwl3945_is_associated(priv
)) {
1717 IWL_DEBUG_QOS("send QoS cmd with QoS active %d \n",
1718 priv
->qos_data
.qos_active
);
1720 iwl3945_send_qos_params_command(priv
,
1721 &(priv
->qos_data
.def_qos_parm
));
1726 * Power management (not Tx power!) functions
1728 #define MSEC_TO_USEC 1024
1731 #define NOSLP __constant_cpu_to_le16(0), 0, 0
1732 #define SLP IWL_POWER_DRIVER_ALLOW_SLEEP_MSK, 0, 0
1733 #define SLP_TIMEOUT(T) __constant_cpu_to_le32((T) * MSEC_TO_USEC)
1734 #define SLP_VEC(X0, X1, X2, X3, X4) {__constant_cpu_to_le32(X0), \
1735 __constant_cpu_to_le32(X1), \
1736 __constant_cpu_to_le32(X2), \
1737 __constant_cpu_to_le32(X3), \
1738 __constant_cpu_to_le32(X4)}
1740 /* default power management (not Tx power) table values */
1742 static struct iwl_power_vec_entry range_0
[IWL39_POWER_AC
] = {
1743 {{NOSLP
, SLP_TIMEOUT(0), SLP_TIMEOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0},
1744 {{SLP
, SLP_TIMEOUT(200), SLP_TIMEOUT(500), SLP_VEC(1, 2, 3, 4, 4)}, 0},
1745 {{SLP
, SLP_TIMEOUT(200), SLP_TIMEOUT(300), SLP_VEC(2, 4, 6, 7, 7)}, 0},
1746 {{SLP
, SLP_TIMEOUT(50), SLP_TIMEOUT(100), SLP_VEC(2, 6, 9, 9, 10)}, 0},
1747 {{SLP
, SLP_TIMEOUT(50), SLP_TIMEOUT(25), SLP_VEC(2, 7, 9, 9, 10)}, 1},
1748 {{SLP
, SLP_TIMEOUT(25), SLP_TIMEOUT(25), SLP_VEC(4, 7, 10, 10, 10)}, 1}
1752 static struct iwl_power_vec_entry range_1
[IWL39_POWER_AC
] = {
1753 {{NOSLP
, SLP_TIMEOUT(0), SLP_TIMEOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0},
1754 {{SLP
, SLP_TIMEOUT(200), SLP_TIMEOUT(500),
1755 SLP_VEC(1, 2, 3, 4, 0xFF)}, 0},
1756 {{SLP
, SLP_TIMEOUT(200), SLP_TIMEOUT(300),
1757 SLP_VEC(2, 4, 6, 7, 0xFF)}, 0},
1758 {{SLP
, SLP_TIMEOUT(50), SLP_TIMEOUT(100),
1759 SLP_VEC(2, 6, 9, 9, 0xFF)}, 0},
1760 {{SLP
, SLP_TIMEOUT(50), SLP_TIMEOUT(25), SLP_VEC(2, 7, 9, 9, 0xFF)}, 0},
1761 {{SLP
, SLP_TIMEOUT(25), SLP_TIMEOUT(25),
1762 SLP_VEC(4, 7, 10, 10, 0xFF)}, 0}
1765 int iwl3945_power_init_handle(struct iwl3945_priv
*priv
)
1768 struct iwl3945_power_mgr
*pow_data
;
1769 int size
= sizeof(struct iwl_power_vec_entry
) * IWL39_POWER_AC
;
1772 IWL_DEBUG_POWER("Initialize power \n");
1774 pow_data
= &(priv
->power_data
);
1776 memset(pow_data
, 0, sizeof(*pow_data
));
1778 pow_data
->active_index
= IWL_POWER_RANGE_0
;
1779 pow_data
->dtim_val
= 0xffff;
1781 memcpy(&pow_data
->pwr_range_0
[0], &range_0
[0], size
);
1782 memcpy(&pow_data
->pwr_range_1
[0], &range_1
[0], size
);
1784 rc
= pci_read_config_word(priv
->pci_dev
, PCI_LINK_CTRL
, &pci_pm
);
1788 struct iwl_powertable_cmd
*cmd
;
1790 IWL_DEBUG_POWER("adjust power command flags\n");
1792 for (i
= 0; i
< IWL39_POWER_AC
; i
++) {
1793 cmd
= &pow_data
->pwr_range_0
[i
].cmd
;
1796 cmd
->flags
&= ~IWL_POWER_PCI_PM_MSK
;
1798 cmd
->flags
|= IWL_POWER_PCI_PM_MSK
;
1804 static int iwl3945_update_power_cmd(struct iwl3945_priv
*priv
,
1805 struct iwl_powertable_cmd
*cmd
, u32 mode
)
1810 struct iwl_power_vec_entry
*range
;
1812 struct iwl3945_power_mgr
*pow_data
;
1814 if (mode
> IWL_POWER_INDEX_5
) {
1815 IWL_DEBUG_POWER("Error invalid power mode \n");
1818 pow_data
= &(priv
->power_data
);
1820 if (pow_data
->active_index
== IWL_POWER_RANGE_0
)
1821 range
= &pow_data
->pwr_range_0
[0];
1823 range
= &pow_data
->pwr_range_1
[1];
1825 memcpy(cmd
, &range
[mode
].cmd
, sizeof(struct iwl3945_powertable_cmd
));
1827 #ifdef IWL_MAC80211_DISABLE
1828 if (priv
->assoc_network
!= NULL
) {
1829 unsigned long flags
;
1831 period
= priv
->assoc_network
->tim
.tim_period
;
1833 #endif /*IWL_MAC80211_DISABLE */
1834 skip
= range
[mode
].no_dtim
;
1843 cmd
->flags
&= ~IWL_POWER_SLEEP_OVER_DTIM_MSK
;
1845 __le32 slp_itrvl
= cmd
->sleep_interval
[IWL_POWER_VEC_SIZE
- 1];
1846 max_sleep
= (le32_to_cpu(slp_itrvl
) / period
) * period
;
1847 cmd
->flags
|= IWL_POWER_SLEEP_OVER_DTIM_MSK
;
1850 for (i
= 0; i
< IWL_POWER_VEC_SIZE
; i
++) {
1851 if (le32_to_cpu(cmd
->sleep_interval
[i
]) > max_sleep
)
1852 cmd
->sleep_interval
[i
] = cpu_to_le32(max_sleep
);
1855 IWL_DEBUG_POWER("Flags value = 0x%08X\n", cmd
->flags
);
1856 IWL_DEBUG_POWER("Tx timeout = %u\n", le32_to_cpu(cmd
->tx_data_timeout
));
1857 IWL_DEBUG_POWER("Rx timeout = %u\n", le32_to_cpu(cmd
->rx_data_timeout
));
1858 IWL_DEBUG_POWER("Sleep interval vector = { %d , %d , %d , %d , %d }\n",
1859 le32_to_cpu(cmd
->sleep_interval
[0]),
1860 le32_to_cpu(cmd
->sleep_interval
[1]),
1861 le32_to_cpu(cmd
->sleep_interval
[2]),
1862 le32_to_cpu(cmd
->sleep_interval
[3]),
1863 le32_to_cpu(cmd
->sleep_interval
[4]));
1868 static int iwl3945_send_power_mode(struct iwl3945_priv
*priv
, u32 mode
)
1870 u32
uninitialized_var(final_mode
);
1872 struct iwl_powertable_cmd cmd
;
1874 /* If on battery, set to 3,
1875 * if plugged into AC power, set to CAM ("continuously aware mode"),
1876 * else user level */
1878 case IWL39_POWER_BATTERY
:
1879 final_mode
= IWL_POWER_INDEX_3
;
1881 case IWL39_POWER_AC
:
1882 final_mode
= IWL_POWER_MODE_CAM
;
1889 iwl3945_update_power_cmd(priv
, &cmd
, final_mode
);
1891 /* FIXME use get_hcmd_size 3945 command is 4 bytes shorter */
1892 rc
= iwl3945_send_cmd_pdu(priv
, POWER_TABLE_CMD
,
1893 sizeof(struct iwl3945_powertable_cmd
), &cmd
);
1895 if (final_mode
== IWL_POWER_MODE_CAM
)
1896 clear_bit(STATUS_POWER_PMI
, &priv
->status
);
1898 set_bit(STATUS_POWER_PMI
, &priv
->status
);
1904 * iwl3945_scan_cancel - Cancel any currently executing HW scan
1906 * NOTE: priv->mutex is not required before calling this function
1908 static int iwl3945_scan_cancel(struct iwl3945_priv
*priv
)
1910 if (!test_bit(STATUS_SCAN_HW
, &priv
->status
)) {
1911 clear_bit(STATUS_SCANNING
, &priv
->status
);
1915 if (test_bit(STATUS_SCANNING
, &priv
->status
)) {
1916 if (!test_bit(STATUS_SCAN_ABORTING
, &priv
->status
)) {
1917 IWL_DEBUG_SCAN("Queuing scan abort.\n");
1918 set_bit(STATUS_SCAN_ABORTING
, &priv
->status
);
1919 queue_work(priv
->workqueue
, &priv
->abort_scan
);
1922 IWL_DEBUG_SCAN("Scan abort already in progress.\n");
1924 return test_bit(STATUS_SCANNING
, &priv
->status
);
1931 * iwl3945_scan_cancel_timeout - Cancel any currently executing HW scan
1932 * @ms: amount of time to wait (in milliseconds) for scan to abort
1934 * NOTE: priv->mutex must be held before calling this function
1936 static int iwl3945_scan_cancel_timeout(struct iwl3945_priv
*priv
, unsigned long ms
)
1938 unsigned long now
= jiffies
;
1941 ret
= iwl3945_scan_cancel(priv
);
1943 mutex_unlock(&priv
->mutex
);
1944 while (!time_after(jiffies
, now
+ msecs_to_jiffies(ms
)) &&
1945 test_bit(STATUS_SCANNING
, &priv
->status
))
1947 mutex_lock(&priv
->mutex
);
1949 return test_bit(STATUS_SCANNING
, &priv
->status
);
1955 #define MAX_UCODE_BEACON_INTERVAL 1024
1956 #define INTEL_CONN_LISTEN_INTERVAL __constant_cpu_to_le16(0xA)
1958 static __le16
iwl3945_adjust_beacon_interval(u16 beacon_val
)
1961 u16 beacon_factor
= 0;
1964 (beacon_val
+ MAX_UCODE_BEACON_INTERVAL
)
1965 / MAX_UCODE_BEACON_INTERVAL
;
1966 new_val
= beacon_val
/ beacon_factor
;
1968 return cpu_to_le16(new_val
);
1971 static void iwl3945_setup_rxon_timing(struct iwl3945_priv
*priv
)
1973 u64 interval_tm_unit
;
1975 unsigned long flags
;
1976 struct ieee80211_conf
*conf
= NULL
;
1979 conf
= ieee80211_get_hw_conf(priv
->hw
);
1981 spin_lock_irqsave(&priv
->lock
, flags
);
1982 priv
->rxon_timing
.timestamp
= cpu_to_le64(priv
->timestamp
);
1983 priv
->rxon_timing
.listen_interval
= INTEL_CONN_LISTEN_INTERVAL
;
1985 tsf
= priv
->timestamp
;
1987 beacon_int
= priv
->beacon_int
;
1988 spin_unlock_irqrestore(&priv
->lock
, flags
);
1990 if (priv
->iw_mode
== NL80211_IFTYPE_STATION
) {
1991 if (beacon_int
== 0) {
1992 priv
->rxon_timing
.beacon_interval
= cpu_to_le16(100);
1993 priv
->rxon_timing
.beacon_init_val
= cpu_to_le32(102400);
1995 priv
->rxon_timing
.beacon_interval
=
1996 cpu_to_le16(beacon_int
);
1997 priv
->rxon_timing
.beacon_interval
=
1998 iwl3945_adjust_beacon_interval(
1999 le16_to_cpu(priv
->rxon_timing
.beacon_interval
));
2002 priv
->rxon_timing
.atim_window
= 0;
2004 priv
->rxon_timing
.beacon_interval
=
2005 iwl3945_adjust_beacon_interval(conf
->beacon_int
);
2006 /* TODO: we need to get atim_window from upper stack
2007 * for now we set to 0 */
2008 priv
->rxon_timing
.atim_window
= 0;
2012 (le16_to_cpu(priv
->rxon_timing
.beacon_interval
) * 1024);
2013 result
= do_div(tsf
, interval_tm_unit
);
2014 priv
->rxon_timing
.beacon_init_val
=
2015 cpu_to_le32((u32
) ((u64
) interval_tm_unit
- result
));
2018 ("beacon interval %d beacon timer %d beacon tim %d\n",
2019 le16_to_cpu(priv
->rxon_timing
.beacon_interval
),
2020 le32_to_cpu(priv
->rxon_timing
.beacon_init_val
),
2021 le16_to_cpu(priv
->rxon_timing
.atim_window
));
2024 static int iwl3945_scan_initiate(struct iwl3945_priv
*priv
)
2026 if (!iwl3945_is_ready_rf(priv
)) {
2027 IWL_DEBUG_SCAN("Aborting scan due to not ready.\n");
2031 if (test_bit(STATUS_SCANNING
, &priv
->status
)) {
2032 IWL_DEBUG_SCAN("Scan already in progress.\n");
2036 if (test_bit(STATUS_SCAN_ABORTING
, &priv
->status
)) {
2037 IWL_DEBUG_SCAN("Scan request while abort pending. "
2042 IWL_DEBUG_INFO("Starting scan...\n");
2043 if (priv
->cfg
->sku
& IWL_SKU_G
)
2044 priv
->scan_bands
|= BIT(IEEE80211_BAND_2GHZ
);
2045 if (priv
->cfg
->sku
& IWL_SKU_A
)
2046 priv
->scan_bands
|= BIT(IEEE80211_BAND_5GHZ
);
2047 set_bit(STATUS_SCANNING
, &priv
->status
);
2048 priv
->scan_start
= jiffies
;
2049 priv
->scan_pass_start
= priv
->scan_start
;
2051 queue_work(priv
->workqueue
, &priv
->request_scan
);
2056 static int iwl3945_set_rxon_hwcrypto(struct iwl3945_priv
*priv
, int hw_decrypt
)
2058 struct iwl3945_rxon_cmd
*rxon
= &priv
->staging_rxon
;
2061 rxon
->filter_flags
&= ~RXON_FILTER_DIS_DECRYPT_MSK
;
2063 rxon
->filter_flags
|= RXON_FILTER_DIS_DECRYPT_MSK
;
2068 static void iwl3945_set_flags_for_phymode(struct iwl3945_priv
*priv
,
2069 enum ieee80211_band band
)
2071 if (band
== IEEE80211_BAND_5GHZ
) {
2072 priv
->staging_rxon
.flags
&=
2073 ~(RXON_FLG_BAND_24G_MSK
| RXON_FLG_AUTO_DETECT_MSK
2074 | RXON_FLG_CCK_MSK
);
2075 priv
->staging_rxon
.flags
|= RXON_FLG_SHORT_SLOT_MSK
;
2077 /* Copied from iwl3945_bg_post_associate() */
2078 if (priv
->assoc_capability
& WLAN_CAPABILITY_SHORT_SLOT_TIME
)
2079 priv
->staging_rxon
.flags
|= RXON_FLG_SHORT_SLOT_MSK
;
2081 priv
->staging_rxon
.flags
&= ~RXON_FLG_SHORT_SLOT_MSK
;
2083 if (priv
->iw_mode
== NL80211_IFTYPE_ADHOC
)
2084 priv
->staging_rxon
.flags
&= ~RXON_FLG_SHORT_SLOT_MSK
;
2086 priv
->staging_rxon
.flags
|= RXON_FLG_BAND_24G_MSK
;
2087 priv
->staging_rxon
.flags
|= RXON_FLG_AUTO_DETECT_MSK
;
2088 priv
->staging_rxon
.flags
&= ~RXON_FLG_CCK_MSK
;
2093 * initialize rxon structure with default values from eeprom
2095 static void iwl3945_connection_init_rx_config(struct iwl3945_priv
*priv
,
2098 const struct iwl_channel_info
*ch_info
;
2100 memset(&priv
->staging_rxon
, 0, sizeof(priv
->staging_rxon
));
2103 case NL80211_IFTYPE_AP
:
2104 priv
->staging_rxon
.dev_type
= RXON_DEV_TYPE_AP
;
2107 case NL80211_IFTYPE_STATION
:
2108 priv
->staging_rxon
.dev_type
= RXON_DEV_TYPE_ESS
;
2109 priv
->staging_rxon
.filter_flags
= RXON_FILTER_ACCEPT_GRP_MSK
;
2112 case NL80211_IFTYPE_ADHOC
:
2113 priv
->staging_rxon
.dev_type
= RXON_DEV_TYPE_IBSS
;
2114 priv
->staging_rxon
.flags
= RXON_FLG_SHORT_PREAMBLE_MSK
;
2115 priv
->staging_rxon
.filter_flags
= RXON_FILTER_BCON_AWARE_MSK
|
2116 RXON_FILTER_ACCEPT_GRP_MSK
;
2119 case NL80211_IFTYPE_MONITOR
:
2120 priv
->staging_rxon
.dev_type
= RXON_DEV_TYPE_SNIFFER
;
2121 priv
->staging_rxon
.filter_flags
= RXON_FILTER_PROMISC_MSK
|
2122 RXON_FILTER_CTL2HOST_MSK
| RXON_FILTER_ACCEPT_GRP_MSK
;
2125 IWL_ERROR("Unsupported interface type %d\n", mode
);
2130 /* TODO: Figure out when short_preamble would be set and cache from
2132 if (!hw_to_local(priv
->hw
)->short_preamble
)
2133 priv
->staging_rxon
.flags
&= ~RXON_FLG_SHORT_PREAMBLE_MSK
;
2135 priv
->staging_rxon
.flags
|= RXON_FLG_SHORT_PREAMBLE_MSK
;
2138 ch_info
= iwl3945_get_channel_info(priv
, priv
->band
,
2139 le16_to_cpu(priv
->active_rxon
.channel
));
2142 ch_info
= &priv
->channel_info
[0];
2145 * in some case A channels are all non IBSS
2146 * in this case force B/G channel
2148 if ((mode
== NL80211_IFTYPE_ADHOC
) && !(is_channel_ibss(ch_info
)))
2149 ch_info
= &priv
->channel_info
[0];
2151 priv
->staging_rxon
.channel
= cpu_to_le16(ch_info
->channel
);
2152 if (is_channel_a_band(ch_info
))
2153 priv
->band
= IEEE80211_BAND_5GHZ
;
2155 priv
->band
= IEEE80211_BAND_2GHZ
;
2157 iwl3945_set_flags_for_phymode(priv
, priv
->band
);
2159 priv
->staging_rxon
.ofdm_basic_rates
=
2160 (IWL_OFDM_RATES_MASK
>> IWL_FIRST_OFDM_RATE
) & 0xFF;
2161 priv
->staging_rxon
.cck_basic_rates
=
2162 (IWL_CCK_RATES_MASK
>> IWL_FIRST_CCK_RATE
) & 0xF;
2165 static int iwl3945_set_mode(struct iwl3945_priv
*priv
, int mode
)
2167 if (mode
== NL80211_IFTYPE_ADHOC
) {
2168 const struct iwl_channel_info
*ch_info
;
2170 ch_info
= iwl3945_get_channel_info(priv
,
2172 le16_to_cpu(priv
->staging_rxon
.channel
));
2174 if (!ch_info
|| !is_channel_ibss(ch_info
)) {
2175 IWL_ERROR("channel %d not IBSS channel\n",
2176 le16_to_cpu(priv
->staging_rxon
.channel
));
2181 iwl3945_connection_init_rx_config(priv
, mode
);
2182 memcpy(priv
->staging_rxon
.node_addr
, priv
->mac_addr
, ETH_ALEN
);
2184 iwl3945_clear_stations_table(priv
);
2186 /* don't commit rxon if rf-kill is on*/
2187 if (!iwl3945_is_ready_rf(priv
))
2190 cancel_delayed_work(&priv
->scan_check
);
2191 if (iwl3945_scan_cancel_timeout(priv
, 100)) {
2192 IWL_WARNING("Aborted scan still in progress after 100ms\n");
2193 IWL_DEBUG_MAC80211("leaving - scan abort failed.\n");
2197 iwl3945_commit_rxon(priv
);
2202 static void iwl3945_build_tx_cmd_hwcrypto(struct iwl3945_priv
*priv
,
2203 struct ieee80211_tx_info
*info
,
2204 struct iwl3945_cmd
*cmd
,
2205 struct sk_buff
*skb_frag
,
2208 struct iwl3945_hw_key
*keyinfo
=
2209 &priv
->stations
[info
->control
.hw_key
->hw_key_idx
].keyinfo
;
2211 switch (keyinfo
->alg
) {
2213 cmd
->cmd
.tx
.sec_ctl
= TX_CMD_SEC_CCM
;
2214 memcpy(cmd
->cmd
.tx
.key
, keyinfo
->key
, keyinfo
->keylen
);
2215 IWL_DEBUG_TX("tx_cmd with AES hwcrypto\n");
2220 cmd
->cmd
.tx
.sec_ctl
= TX_CMD_SEC_TKIP
;
2223 memcpy(cmd
->cmd
.tx
.tkip_mic
.byte
, skb_frag
->tail
- 8,
2226 memset(cmd
->cmd
.tx
.tkip_mic
.byte
, 0, 8);
2231 cmd
->cmd
.tx
.sec_ctl
= TX_CMD_SEC_WEP
|
2232 (info
->control
.hw_key
->hw_key_idx
& TX_CMD_SEC_MSK
) << TX_CMD_SEC_SHIFT
;
2234 if (keyinfo
->keylen
== 13)
2235 cmd
->cmd
.tx
.sec_ctl
|= TX_CMD_SEC_KEY128
;
2237 memcpy(&cmd
->cmd
.tx
.key
[3], keyinfo
->key
, keyinfo
->keylen
);
2239 IWL_DEBUG_TX("Configuring packet for WEP encryption "
2240 "with key %d\n", info
->control
.hw_key
->hw_key_idx
);
2244 printk(KERN_ERR
"Unknown encode alg %d\n", keyinfo
->alg
);
2250 * handle build REPLY_TX command notification.
2252 static void iwl3945_build_tx_cmd_basic(struct iwl3945_priv
*priv
,
2253 struct iwl3945_cmd
*cmd
,
2254 struct ieee80211_tx_info
*info
,
2255 struct ieee80211_hdr
*hdr
,
2256 int is_unicast
, u8 std_id
)
2258 __le16 fc
= hdr
->frame_control
;
2259 __le32 tx_flags
= cmd
->cmd
.tx
.tx_flags
;
2260 u8 rc_flags
= info
->control
.rates
[0].flags
;
2262 cmd
->cmd
.tx
.stop_time
.life_time
= TX_CMD_LIFE_TIME_INFINITE
;
2263 if (!(info
->flags
& IEEE80211_TX_CTL_NO_ACK
)) {
2264 tx_flags
|= TX_CMD_FLG_ACK_MSK
;
2265 if (ieee80211_is_mgmt(fc
))
2266 tx_flags
|= TX_CMD_FLG_SEQ_CTL_MSK
;
2267 if (ieee80211_is_probe_resp(fc
) &&
2268 !(le16_to_cpu(hdr
->seq_ctrl
) & 0xf))
2269 tx_flags
|= TX_CMD_FLG_TSF_MSK
;
2271 tx_flags
&= (~TX_CMD_FLG_ACK_MSK
);
2272 tx_flags
|= TX_CMD_FLG_SEQ_CTL_MSK
;
2275 cmd
->cmd
.tx
.sta_id
= std_id
;
2276 if (ieee80211_has_morefrags(fc
))
2277 tx_flags
|= TX_CMD_FLG_MORE_FRAG_MSK
;
2279 if (ieee80211_is_data_qos(fc
)) {
2280 u8
*qc
= ieee80211_get_qos_ctl(hdr
);
2281 cmd
->cmd
.tx
.tid_tspec
= qc
[0] & 0xf;
2282 tx_flags
&= ~TX_CMD_FLG_SEQ_CTL_MSK
;
2284 tx_flags
|= TX_CMD_FLG_SEQ_CTL_MSK
;
2287 if (rc_flags
& IEEE80211_TX_RC_USE_RTS_CTS
) {
2288 tx_flags
|= TX_CMD_FLG_RTS_MSK
;
2289 tx_flags
&= ~TX_CMD_FLG_CTS_MSK
;
2290 } else if (rc_flags
& IEEE80211_TX_RC_USE_CTS_PROTECT
) {
2291 tx_flags
&= ~TX_CMD_FLG_RTS_MSK
;
2292 tx_flags
|= TX_CMD_FLG_CTS_MSK
;
2295 if ((tx_flags
& TX_CMD_FLG_RTS_MSK
) || (tx_flags
& TX_CMD_FLG_CTS_MSK
))
2296 tx_flags
|= TX_CMD_FLG_FULL_TXOP_PROT_MSK
;
2298 tx_flags
&= ~(TX_CMD_FLG_ANT_SEL_MSK
);
2299 if (ieee80211_is_mgmt(fc
)) {
2300 if (ieee80211_is_assoc_req(fc
) || ieee80211_is_reassoc_req(fc
))
2301 cmd
->cmd
.tx
.timeout
.pm_frame_timeout
= cpu_to_le16(3);
2303 cmd
->cmd
.tx
.timeout
.pm_frame_timeout
= cpu_to_le16(2);
2305 cmd
->cmd
.tx
.timeout
.pm_frame_timeout
= 0;
2306 #ifdef CONFIG_IWL3945_LEDS
2307 priv
->rxtxpackets
+= le16_to_cpu(cmd
->cmd
.tx
.len
);
2311 cmd
->cmd
.tx
.driver_txop
= 0;
2312 cmd
->cmd
.tx
.tx_flags
= tx_flags
;
2313 cmd
->cmd
.tx
.next_frame_len
= 0;
2317 * iwl3945_get_sta_id - Find station's index within station table
2319 static int iwl3945_get_sta_id(struct iwl3945_priv
*priv
, struct ieee80211_hdr
*hdr
)
2322 u16 fc
= le16_to_cpu(hdr
->frame_control
);
2324 /* If this frame is broadcast or management, use broadcast station id */
2325 if (((fc
& IEEE80211_FCTL_FTYPE
) != IEEE80211_FTYPE_DATA
) ||
2326 is_multicast_ether_addr(hdr
->addr1
))
2327 return priv
->hw_setting
.bcast_sta_id
;
2329 switch (priv
->iw_mode
) {
2331 /* If we are a client station in a BSS network, use the special
2332 * AP station entry (that's the only station we communicate with) */
2333 case NL80211_IFTYPE_STATION
:
2336 /* If we are an AP, then find the station, or use BCAST */
2337 case NL80211_IFTYPE_AP
:
2338 sta_id
= iwl3945_hw_find_station(priv
, hdr
->addr1
);
2339 if (sta_id
!= IWL_INVALID_STATION
)
2341 return priv
->hw_setting
.bcast_sta_id
;
2343 /* If this frame is going out to an IBSS network, find the station,
2344 * or create a new station table entry */
2345 case NL80211_IFTYPE_ADHOC
: {
2346 /* Create new station table entry */
2347 sta_id
= iwl3945_hw_find_station(priv
, hdr
->addr1
);
2348 if (sta_id
!= IWL_INVALID_STATION
)
2351 sta_id
= iwl3945_add_station(priv
, hdr
->addr1
, 0, CMD_ASYNC
);
2353 if (sta_id
!= IWL_INVALID_STATION
)
2356 IWL_DEBUG_DROP("Station %pM not in station map. "
2357 "Defaulting to broadcast...\n",
2359 iwl_print_hex_dump(priv
, IWL_DL_DROP
, (u8
*) hdr
, sizeof(*hdr
));
2360 return priv
->hw_setting
.bcast_sta_id
;
2362 /* If we are in monitor mode, use BCAST. This is required for
2363 * packet injection. */
2364 case NL80211_IFTYPE_MONITOR
:
2365 return priv
->hw_setting
.bcast_sta_id
;
2368 IWL_WARNING("Unknown mode of operation: %d\n", priv
->iw_mode
);
2369 return priv
->hw_setting
.bcast_sta_id
;
2374 * start REPLY_TX command process
2376 static int iwl3945_tx_skb(struct iwl3945_priv
*priv
, struct sk_buff
*skb
)
2378 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*)skb
->data
;
2379 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(skb
);
2380 struct iwl3945_tfd_frame
*tfd
;
2382 int txq_id
= skb_get_queue_mapping(skb
);
2383 struct iwl3945_tx_queue
*txq
= NULL
;
2384 struct iwl_queue
*q
= NULL
;
2385 dma_addr_t phys_addr
;
2386 dma_addr_t txcmd_phys
;
2387 struct iwl3945_cmd
*out_cmd
= NULL
;
2388 u16 len
, idx
, len_org
, hdr_len
;
2395 u8 wait_write_ptr
= 0;
2397 unsigned long flags
;
2400 spin_lock_irqsave(&priv
->lock
, flags
);
2401 if (iwl3945_is_rfkill(priv
)) {
2402 IWL_DEBUG_DROP("Dropping - RF KILL\n");
2406 if ((ieee80211_get_tx_rate(priv
->hw
, info
)->hw_value
& 0xFF) == IWL_INVALID_RATE
) {
2407 IWL_ERROR("ERROR: No TX rate available.\n");
2411 unicast
= !is_multicast_ether_addr(hdr
->addr1
);
2414 fc
= hdr
->frame_control
;
2416 #ifdef CONFIG_IWL3945_DEBUG
2417 if (ieee80211_is_auth(fc
))
2418 IWL_DEBUG_TX("Sending AUTH frame\n");
2419 else if (ieee80211_is_assoc_req(fc
))
2420 IWL_DEBUG_TX("Sending ASSOC frame\n");
2421 else if (ieee80211_is_reassoc_req(fc
))
2422 IWL_DEBUG_TX("Sending REASSOC frame\n");
2425 /* drop all data frame if we are not associated */
2426 if (ieee80211_is_data(fc
) &&
2427 (priv
->iw_mode
!= NL80211_IFTYPE_MONITOR
) && /* packet injection */
2428 (!iwl3945_is_associated(priv
) ||
2429 ((priv
->iw_mode
== NL80211_IFTYPE_STATION
) && !priv
->assoc_id
))) {
2430 IWL_DEBUG_DROP("Dropping - !iwl3945_is_associated\n");
2434 spin_unlock_irqrestore(&priv
->lock
, flags
);
2436 hdr_len
= ieee80211_hdrlen(fc
);
2438 /* Find (or create) index into station table for destination station */
2439 sta_id
= iwl3945_get_sta_id(priv
, hdr
);
2440 if (sta_id
== IWL_INVALID_STATION
) {
2441 IWL_DEBUG_DROP("Dropping - INVALID STATION: %pM\n",
2446 IWL_DEBUG_RATE("station Id %d\n", sta_id
);
2448 if (ieee80211_is_data_qos(fc
)) {
2449 qc
= ieee80211_get_qos_ctl(hdr
);
2450 tid
= qc
[0] & IEEE80211_QOS_CTL_TID_MASK
;
2451 seq_number
= priv
->stations
[sta_id
].tid
[tid
].seq_number
&
2453 hdr
->seq_ctrl
= cpu_to_le16(seq_number
) |
2455 __constant_cpu_to_le16(IEEE80211_SCTL_FRAG
));
2459 /* Descriptor for chosen Tx queue */
2460 txq
= &priv
->txq
[txq_id
];
2463 spin_lock_irqsave(&priv
->lock
, flags
);
2465 /* Set up first empty TFD within this queue's circular TFD buffer */
2466 tfd
= &txq
->bd
[q
->write_ptr
];
2467 memset(tfd
, 0, sizeof(*tfd
));
2468 control_flags
= (u32
*) tfd
;
2469 idx
= get_cmd_index(q
, q
->write_ptr
, 0);
2471 /* Set up driver data for this TFD */
2472 memset(&(txq
->txb
[q
->write_ptr
]), 0, sizeof(struct iwl3945_tx_info
));
2473 txq
->txb
[q
->write_ptr
].skb
[0] = skb
;
2475 /* Init first empty entry in queue's array of Tx/cmd buffers */
2476 out_cmd
= &txq
->cmd
[idx
];
2477 memset(&out_cmd
->hdr
, 0, sizeof(out_cmd
->hdr
));
2478 memset(&out_cmd
->cmd
.tx
, 0, sizeof(out_cmd
->cmd
.tx
));
2481 * Set up the Tx-command (not MAC!) header.
2482 * Store the chosen Tx queue and TFD index within the sequence field;
2483 * after Tx, uCode's Tx response will return this value so driver can
2484 * locate the frame within the tx queue and do post-tx processing.
2486 out_cmd
->hdr
.cmd
= REPLY_TX
;
2487 out_cmd
->hdr
.sequence
= cpu_to_le16((u16
)(QUEUE_TO_SEQ(txq_id
) |
2488 INDEX_TO_SEQ(q
->write_ptr
)));
2490 /* Copy MAC header from skb into command buffer */
2491 memcpy(out_cmd
->cmd
.tx
.hdr
, hdr
, hdr_len
);
2494 * Use the first empty entry in this queue's command buffer array
2495 * to contain the Tx command and MAC header concatenated together
2496 * (payload data will be in another buffer).
2497 * Size of this varies, due to varying MAC header length.
2498 * If end is not dword aligned, we'll have 2 extra bytes at the end
2499 * of the MAC header (device reads on dword boundaries).
2500 * We'll tell device about this padding later.
2502 len
= priv
->hw_setting
.tx_cmd_len
+
2503 sizeof(struct iwl_cmd_header
) + hdr_len
;
2506 len
= (len
+ 3) & ~3;
2513 /* Physical address of this Tx command's header (not MAC header!),
2514 * within command buffer array. */
2515 txcmd_phys
= txq
->dma_addr_cmd
+ sizeof(struct iwl3945_cmd
) * idx
+
2516 offsetof(struct iwl3945_cmd
, hdr
);
2518 /* Add buffer containing Tx command and MAC(!) header to TFD's
2520 iwl3945_hw_txq_attach_buf_to_tfd(priv
, tfd
, txcmd_phys
, len
);
2522 if (info
->control
.hw_key
)
2523 iwl3945_build_tx_cmd_hwcrypto(priv
, info
, out_cmd
, skb
, 0);
2525 /* Set up TFD's 2nd entry to point directly to remainder of skb,
2526 * if any (802.11 null frames have no payload). */
2527 len
= skb
->len
- hdr_len
;
2529 phys_addr
= pci_map_single(priv
->pci_dev
, skb
->data
+ hdr_len
,
2530 len
, PCI_DMA_TODEVICE
);
2531 iwl3945_hw_txq_attach_buf_to_tfd(priv
, tfd
, phys_addr
, len
);
2535 /* If there is no payload, then we use only one Tx buffer */
2536 *control_flags
= TFD_CTL_COUNT_SET(1);
2538 /* Else use 2 buffers.
2539 * Tell 3945 about any padding after MAC header */
2540 *control_flags
= TFD_CTL_COUNT_SET(2) |
2541 TFD_CTL_PAD_SET(U32_PAD(len
));
2543 /* Total # bytes to be transmitted */
2544 len
= (u16
)skb
->len
;
2545 out_cmd
->cmd
.tx
.len
= cpu_to_le16(len
);
2547 /* TODO need this for burst mode later on */
2548 iwl3945_build_tx_cmd_basic(priv
, out_cmd
, info
, hdr
, unicast
, sta_id
);
2550 /* set is_hcca to 0; it probably will never be implemented */
2551 iwl3945_hw_build_tx_cmd_rate(priv
, out_cmd
, info
, hdr
, sta_id
, 0);
2553 out_cmd
->cmd
.tx
.tx_flags
&= ~TX_CMD_FLG_ANT_A_MSK
;
2554 out_cmd
->cmd
.tx
.tx_flags
&= ~TX_CMD_FLG_ANT_B_MSK
;
2556 if (!ieee80211_has_morefrags(hdr
->frame_control
)) {
2557 txq
->need_update
= 1;
2559 priv
->stations
[sta_id
].tid
[tid
].seq_number
= seq_number
;
2562 txq
->need_update
= 0;
2565 iwl_print_hex_dump(priv
, IWL_DL_TX
, out_cmd
->cmd
.payload
,
2566 sizeof(out_cmd
->cmd
.tx
));
2568 iwl_print_hex_dump(priv
, IWL_DL_TX
, (u8
*)out_cmd
->cmd
.tx
.hdr
,
2569 ieee80211_hdrlen(fc
));
2571 /* Tell device the write index *just past* this latest filled TFD */
2572 q
->write_ptr
= iwl_queue_inc_wrap(q
->write_ptr
, q
->n_bd
);
2573 rc
= iwl3945_tx_queue_update_write_ptr(priv
, txq
);
2574 spin_unlock_irqrestore(&priv
->lock
, flags
);
2579 if ((iwl_queue_space(q
) < q
->high_mark
)
2580 && priv
->mac80211_registered
) {
2581 if (wait_write_ptr
) {
2582 spin_lock_irqsave(&priv
->lock
, flags
);
2583 txq
->need_update
= 1;
2584 iwl3945_tx_queue_update_write_ptr(priv
, txq
);
2585 spin_unlock_irqrestore(&priv
->lock
, flags
);
2588 ieee80211_stop_queue(priv
->hw
, skb_get_queue_mapping(skb
));
2594 spin_unlock_irqrestore(&priv
->lock
, flags
);
2599 static void iwl3945_set_rate(struct iwl3945_priv
*priv
)
2601 const struct ieee80211_supported_band
*sband
= NULL
;
2602 struct ieee80211_rate
*rate
;
2605 sband
= iwl3945_get_band(priv
, priv
->band
);
2607 IWL_ERROR("Failed to set rate: unable to get hw mode\n");
2611 priv
->active_rate
= 0;
2612 priv
->active_rate_basic
= 0;
2614 IWL_DEBUG_RATE("Setting rates for %s GHz\n",
2615 sband
->band
== IEEE80211_BAND_2GHZ
? "2.4" : "5");
2617 for (i
= 0; i
< sband
->n_bitrates
; i
++) {
2618 rate
= &sband
->bitrates
[i
];
2619 if ((rate
->hw_value
< IWL_RATE_COUNT
) &&
2620 !(rate
->flags
& IEEE80211_CHAN_DISABLED
)) {
2621 IWL_DEBUG_RATE("Adding rate index %d (plcp %d)\n",
2622 rate
->hw_value
, iwl3945_rates
[rate
->hw_value
].plcp
);
2623 priv
->active_rate
|= (1 << rate
->hw_value
);
2627 IWL_DEBUG_RATE("Set active_rate = %0x, active_rate_basic = %0x\n",
2628 priv
->active_rate
, priv
->active_rate_basic
);
2631 * If a basic rate is configured, then use it (adding IWL_RATE_1M_MASK)
2632 * otherwise set it to the default of all CCK rates and 6, 12, 24 for
2635 if (priv
->active_rate_basic
& IWL_CCK_BASIC_RATES_MASK
)
2636 priv
->staging_rxon
.cck_basic_rates
=
2637 ((priv
->active_rate_basic
&
2638 IWL_CCK_RATES_MASK
) >> IWL_FIRST_CCK_RATE
) & 0xF;
2640 priv
->staging_rxon
.cck_basic_rates
=
2641 (IWL_CCK_BASIC_RATES_MASK
>> IWL_FIRST_CCK_RATE
) & 0xF;
2643 if (priv
->active_rate_basic
& IWL_OFDM_BASIC_RATES_MASK
)
2644 priv
->staging_rxon
.ofdm_basic_rates
=
2645 ((priv
->active_rate_basic
&
2646 (IWL_OFDM_BASIC_RATES_MASK
| IWL_RATE_6M_MASK
)) >>
2647 IWL_FIRST_OFDM_RATE
) & 0xFF;
2649 priv
->staging_rxon
.ofdm_basic_rates
=
2650 (IWL_OFDM_BASIC_RATES_MASK
>> IWL_FIRST_OFDM_RATE
) & 0xFF;
2653 static void iwl3945_radio_kill_sw(struct iwl3945_priv
*priv
, int disable_radio
)
2655 unsigned long flags
;
2657 if (!!disable_radio
== test_bit(STATUS_RF_KILL_SW
, &priv
->status
))
2660 IWL_DEBUG_RF_KILL("Manual SW RF KILL set to: RADIO %s\n",
2661 disable_radio
? "OFF" : "ON");
2663 if (disable_radio
) {
2664 iwl3945_scan_cancel(priv
);
2665 /* FIXME: This is a workaround for AP */
2666 if (priv
->iw_mode
!= NL80211_IFTYPE_AP
) {
2667 spin_lock_irqsave(&priv
->lock
, flags
);
2668 iwl3945_write32(priv
, CSR_UCODE_DRV_GP1_SET
,
2669 CSR_UCODE_SW_BIT_RFKILL
);
2670 spin_unlock_irqrestore(&priv
->lock
, flags
);
2671 iwl3945_send_card_state(priv
, CARD_STATE_CMD_DISABLE
, 0);
2672 set_bit(STATUS_RF_KILL_SW
, &priv
->status
);
2677 spin_lock_irqsave(&priv
->lock
, flags
);
2678 iwl3945_write32(priv
, CSR_UCODE_DRV_GP1_CLR
, CSR_UCODE_SW_BIT_RFKILL
);
2680 clear_bit(STATUS_RF_KILL_SW
, &priv
->status
);
2681 spin_unlock_irqrestore(&priv
->lock
, flags
);
2686 spin_lock_irqsave(&priv
->lock
, flags
);
2687 iwl3945_read32(priv
, CSR_UCODE_DRV_GP1
);
2688 if (!iwl3945_grab_nic_access(priv
))
2689 iwl3945_release_nic_access(priv
);
2690 spin_unlock_irqrestore(&priv
->lock
, flags
);
2692 if (test_bit(STATUS_RF_KILL_HW
, &priv
->status
)) {
2693 IWL_DEBUG_RF_KILL("Can not turn radio back on - "
2694 "disabled by HW switch\n");
2699 queue_work(priv
->workqueue
, &priv
->restart
);
2703 void iwl3945_set_decrypted_flag(struct iwl3945_priv
*priv
, struct sk_buff
*skb
,
2704 u32 decrypt_res
, struct ieee80211_rx_status
*stats
)
2707 le16_to_cpu(((struct ieee80211_hdr
*)skb
->data
)->frame_control
);
2709 if (priv
->active_rxon
.filter_flags
& RXON_FILTER_DIS_DECRYPT_MSK
)
2712 if (!(fc
& IEEE80211_FCTL_PROTECTED
))
2715 IWL_DEBUG_RX("decrypt_res:0x%x\n", decrypt_res
);
2716 switch (decrypt_res
& RX_RES_STATUS_SEC_TYPE_MSK
) {
2717 case RX_RES_STATUS_SEC_TYPE_TKIP
:
2718 if ((decrypt_res
& RX_RES_STATUS_DECRYPT_TYPE_MSK
) ==
2719 RX_RES_STATUS_BAD_ICV_MIC
)
2720 stats
->flag
|= RX_FLAG_MMIC_ERROR
;
2721 case RX_RES_STATUS_SEC_TYPE_WEP
:
2722 case RX_RES_STATUS_SEC_TYPE_CCMP
:
2723 if ((decrypt_res
& RX_RES_STATUS_DECRYPT_TYPE_MSK
) ==
2724 RX_RES_STATUS_DECRYPT_OK
) {
2725 IWL_DEBUG_RX("hw decrypt successfully!!!\n");
2726 stats
->flag
|= RX_FLAG_DECRYPTED
;
2735 #ifdef CONFIG_IWL3945_SPECTRUM_MEASUREMENT
2737 #include "iwl-spectrum.h"
2739 #define BEACON_TIME_MASK_LOW 0x00FFFFFF
2740 #define BEACON_TIME_MASK_HIGH 0xFF000000
2741 #define TIME_UNIT 1024
2744 * extended beacon time format
2745 * time in usec will be changed into a 32-bit value in 8:24 format
2746 * the high 1 byte is the beacon counts
2747 * the lower 3 bytes is the time in usec within one beacon interval
2750 static u32
iwl3945_usecs_to_beacons(u32 usec
, u32 beacon_interval
)
2754 u32 interval
= beacon_interval
* 1024;
2756 if (!interval
|| !usec
)
2759 quot
= (usec
/ interval
) & (BEACON_TIME_MASK_HIGH
>> 24);
2760 rem
= (usec
% interval
) & BEACON_TIME_MASK_LOW
;
2762 return (quot
<< 24) + rem
;
2765 /* base is usually what we get from ucode with each received frame,
2766 * the same as HW timer counter counting down
2769 static __le32
iwl3945_add_beacon_time(u32 base
, u32 addon
, u32 beacon_interval
)
2771 u32 base_low
= base
& BEACON_TIME_MASK_LOW
;
2772 u32 addon_low
= addon
& BEACON_TIME_MASK_LOW
;
2773 u32 interval
= beacon_interval
* TIME_UNIT
;
2774 u32 res
= (base
& BEACON_TIME_MASK_HIGH
) +
2775 (addon
& BEACON_TIME_MASK_HIGH
);
2777 if (base_low
> addon_low
)
2778 res
+= base_low
- addon_low
;
2779 else if (base_low
< addon_low
) {
2780 res
+= interval
+ base_low
- addon_low
;
2785 return cpu_to_le32(res
);
2788 static int iwl3945_get_measurement(struct iwl3945_priv
*priv
,
2789 struct ieee80211_measurement_params
*params
,
2792 struct iwl_spectrum_cmd spectrum
;
2793 struct iwl_rx_packet
*res
;
2794 struct iwl3945_host_cmd cmd
= {
2795 .id
= REPLY_SPECTRUM_MEASUREMENT_CMD
,
2796 .data
= (void *)&spectrum
,
2797 .meta
.flags
= CMD_WANT_SKB
,
2799 u32 add_time
= le64_to_cpu(params
->start_time
);
2801 int spectrum_resp_status
;
2802 int duration
= le16_to_cpu(params
->duration
);
2804 if (iwl3945_is_associated(priv
))
2806 iwl3945_usecs_to_beacons(
2807 le64_to_cpu(params
->start_time
) - priv
->last_tsf
,
2808 le16_to_cpu(priv
->rxon_timing
.beacon_interval
));
2810 memset(&spectrum
, 0, sizeof(spectrum
));
2812 spectrum
.channel_count
= cpu_to_le16(1);
2814 RXON_FLG_TSF2HOST_MSK
| RXON_FLG_ANT_A_MSK
| RXON_FLG_DIS_DIV_MSK
;
2815 spectrum
.filter_flags
= MEASUREMENT_FILTER_FLAG
;
2816 cmd
.len
= sizeof(spectrum
);
2817 spectrum
.len
= cpu_to_le16(cmd
.len
- sizeof(spectrum
.len
));
2819 if (iwl3945_is_associated(priv
))
2820 spectrum
.start_time
=
2821 iwl3945_add_beacon_time(priv
->last_beacon_time
,
2823 le16_to_cpu(priv
->rxon_timing
.beacon_interval
));
2825 spectrum
.start_time
= 0;
2827 spectrum
.channels
[0].duration
= cpu_to_le32(duration
* TIME_UNIT
);
2828 spectrum
.channels
[0].channel
= params
->channel
;
2829 spectrum
.channels
[0].type
= type
;
2830 if (priv
->active_rxon
.flags
& RXON_FLG_BAND_24G_MSK
)
2831 spectrum
.flags
|= RXON_FLG_BAND_24G_MSK
|
2832 RXON_FLG_AUTO_DETECT_MSK
| RXON_FLG_TGG_PROTECT_MSK
;
2834 rc
= iwl3945_send_cmd_sync(priv
, &cmd
);
2838 res
= (struct iwl_rx_packet
*)cmd
.meta
.u
.skb
->data
;
2839 if (res
->hdr
.flags
& IWL_CMD_FAILED_MSK
) {
2840 IWL_ERROR("Bad return from REPLY_RX_ON_ASSOC command\n");
2844 spectrum_resp_status
= le16_to_cpu(res
->u
.spectrum
.status
);
2845 switch (spectrum_resp_status
) {
2846 case 0: /* Command will be handled */
2847 if (res
->u
.spectrum
.id
!= 0xff) {
2848 IWL_DEBUG_INFO("Replaced existing measurement: %d\n",
2849 res
->u
.spectrum
.id
);
2850 priv
->measurement_status
&= ~MEASUREMENT_READY
;
2852 priv
->measurement_status
|= MEASUREMENT_ACTIVE
;
2856 case 1: /* Command will not be handled */
2861 dev_kfree_skb_any(cmd
.meta
.u
.skb
);
2867 static void iwl3945_rx_reply_alive(struct iwl3945_priv
*priv
,
2868 struct iwl3945_rx_mem_buffer
*rxb
)
2870 struct iwl_rx_packet
*pkt
= (void *)rxb
->skb
->data
;
2871 struct iwl_alive_resp
*palive
;
2872 struct delayed_work
*pwork
;
2874 palive
= &pkt
->u
.alive_frame
;
2876 IWL_DEBUG_INFO("Alive ucode status 0x%08X revision "
2878 palive
->is_valid
, palive
->ver_type
,
2879 palive
->ver_subtype
);
2881 if (palive
->ver_subtype
== INITIALIZE_SUBTYPE
) {
2882 IWL_DEBUG_INFO("Initialization Alive received.\n");
2883 memcpy(&priv
->card_alive_init
, &pkt
->u
.alive_frame
,
2884 sizeof(struct iwl_alive_resp
));
2885 pwork
= &priv
->init_alive_start
;
2887 IWL_DEBUG_INFO("Runtime Alive received.\n");
2888 memcpy(&priv
->card_alive
, &pkt
->u
.alive_frame
,
2889 sizeof(struct iwl_alive_resp
));
2890 pwork
= &priv
->alive_start
;
2891 iwl3945_disable_events(priv
);
2894 /* We delay the ALIVE response by 5ms to
2895 * give the HW RF Kill time to activate... */
2896 if (palive
->is_valid
== UCODE_VALID_OK
)
2897 queue_delayed_work(priv
->workqueue
, pwork
,
2898 msecs_to_jiffies(5));
2900 IWL_WARNING("uCode did not respond OK.\n");
2903 static void iwl3945_rx_reply_add_sta(struct iwl3945_priv
*priv
,
2904 struct iwl3945_rx_mem_buffer
*rxb
)
2906 struct iwl_rx_packet
*pkt
= (void *)rxb
->skb
->data
;
2908 IWL_DEBUG_RX("Received REPLY_ADD_STA: 0x%02X\n", pkt
->u
.status
);
2912 static void iwl3945_rx_reply_error(struct iwl3945_priv
*priv
,
2913 struct iwl3945_rx_mem_buffer
*rxb
)
2915 struct iwl_rx_packet
*pkt
= (void *)rxb
->skb
->data
;
2917 IWL_ERROR("Error Reply type 0x%08X cmd %s (0x%02X) "
2918 "seq 0x%04X ser 0x%08X\n",
2919 le32_to_cpu(pkt
->u
.err_resp
.error_type
),
2920 get_cmd_string(pkt
->u
.err_resp
.cmd_id
),
2921 pkt
->u
.err_resp
.cmd_id
,
2922 le16_to_cpu(pkt
->u
.err_resp
.bad_cmd_seq_num
),
2923 le32_to_cpu(pkt
->u
.err_resp
.error_info
));
2926 #define TX_STATUS_ENTRY(x) case TX_STATUS_FAIL_ ## x: return #x
2928 static void iwl3945_rx_csa(struct iwl3945_priv
*priv
, struct iwl3945_rx_mem_buffer
*rxb
)
2930 struct iwl_rx_packet
*pkt
= (void *)rxb
->skb
->data
;
2931 struct iwl3945_rxon_cmd
*rxon
= (void *)&priv
->active_rxon
;
2932 struct iwl_csa_notification
*csa
= &(pkt
->u
.csa_notif
);
2933 IWL_DEBUG_11H("CSA notif: channel %d, status %d\n",
2934 le16_to_cpu(csa
->channel
), le32_to_cpu(csa
->status
));
2935 rxon
->channel
= csa
->channel
;
2936 priv
->staging_rxon
.channel
= csa
->channel
;
2939 static void iwl3945_rx_spectrum_measure_notif(struct iwl3945_priv
*priv
,
2940 struct iwl3945_rx_mem_buffer
*rxb
)
2942 #ifdef CONFIG_IWL3945_SPECTRUM_MEASUREMENT
2943 struct iwl_rx_packet
*pkt
= (void *)rxb
->skb
->data
;
2944 struct iwl_spectrum_notification
*report
= &(pkt
->u
.spectrum_notif
);
2946 if (!report
->state
) {
2947 IWL_DEBUG(IWL_DL_11H
| IWL_DL_INFO
,
2948 "Spectrum Measure Notification: Start\n");
2952 memcpy(&priv
->measure_report
, report
, sizeof(*report
));
2953 priv
->measurement_status
|= MEASUREMENT_READY
;
2957 static void iwl3945_rx_pm_sleep_notif(struct iwl3945_priv
*priv
,
2958 struct iwl3945_rx_mem_buffer
*rxb
)
2960 #ifdef CONFIG_IWL3945_DEBUG
2961 struct iwl_rx_packet
*pkt
= (void *)rxb
->skb
->data
;
2962 struct iwl_sleep_notification
*sleep
= &(pkt
->u
.sleep_notif
);
2963 IWL_DEBUG_RX("sleep mode: %d, src: %d\n",
2964 sleep
->pm_sleep_mode
, sleep
->pm_wakeup_src
);
2968 static void iwl3945_rx_pm_debug_statistics_notif(struct iwl3945_priv
*priv
,
2969 struct iwl3945_rx_mem_buffer
*rxb
)
2971 struct iwl_rx_packet
*pkt
= (void *)rxb
->skb
->data
;
2972 IWL_DEBUG_RADIO("Dumping %d bytes of unhandled "
2973 "notification for %s:\n",
2974 le32_to_cpu(pkt
->len
), get_cmd_string(pkt
->hdr
.cmd
));
2975 iwl_print_hex_dump(priv
, IWL_DL_RADIO
, pkt
->u
.raw
,
2976 le32_to_cpu(pkt
->len
));
2979 static void iwl3945_bg_beacon_update(struct work_struct
*work
)
2981 struct iwl3945_priv
*priv
=
2982 container_of(work
, struct iwl3945_priv
, beacon_update
);
2983 struct sk_buff
*beacon
;
2985 /* Pull updated AP beacon from mac80211. will fail if not in AP mode */
2986 beacon
= ieee80211_beacon_get(priv
->hw
, priv
->vif
);
2989 IWL_ERROR("update beacon failed\n");
2993 mutex_lock(&priv
->mutex
);
2994 /* new beacon skb is allocated every time; dispose previous.*/
2995 if (priv
->ibss_beacon
)
2996 dev_kfree_skb(priv
->ibss_beacon
);
2998 priv
->ibss_beacon
= beacon
;
2999 mutex_unlock(&priv
->mutex
);
3001 iwl3945_send_beacon_cmd(priv
);
3004 static void iwl3945_rx_beacon_notif(struct iwl3945_priv
*priv
,
3005 struct iwl3945_rx_mem_buffer
*rxb
)
3007 #ifdef CONFIG_IWL3945_DEBUG
3008 struct iwl_rx_packet
*pkt
= (void *)rxb
->skb
->data
;
3009 struct iwl3945_beacon_notif
*beacon
= &(pkt
->u
.beacon_status
);
3010 u8 rate
= beacon
->beacon_notify_hdr
.rate
;
3012 IWL_DEBUG_RX("beacon status %x retries %d iss %d "
3013 "tsf %d %d rate %d\n",
3014 le32_to_cpu(beacon
->beacon_notify_hdr
.status
) & TX_STATUS_MSK
,
3015 beacon
->beacon_notify_hdr
.failure_frame
,
3016 le32_to_cpu(beacon
->ibss_mgr_status
),
3017 le32_to_cpu(beacon
->high_tsf
),
3018 le32_to_cpu(beacon
->low_tsf
), rate
);
3021 if ((priv
->iw_mode
== NL80211_IFTYPE_AP
) &&
3022 (!test_bit(STATUS_EXIT_PENDING
, &priv
->status
)))
3023 queue_work(priv
->workqueue
, &priv
->beacon_update
);
3026 /* Service response to REPLY_SCAN_CMD (0x80) */
3027 static void iwl3945_rx_reply_scan(struct iwl3945_priv
*priv
,
3028 struct iwl3945_rx_mem_buffer
*rxb
)
3030 #ifdef CONFIG_IWL3945_DEBUG
3031 struct iwl_rx_packet
*pkt
= (void *)rxb
->skb
->data
;
3032 struct iwl_scanreq_notification
*notif
=
3033 (struct iwl_scanreq_notification
*)pkt
->u
.raw
;
3035 IWL_DEBUG_RX("Scan request status = 0x%x\n", notif
->status
);
3039 /* Service SCAN_START_NOTIFICATION (0x82) */
3040 static void iwl3945_rx_scan_start_notif(struct iwl3945_priv
*priv
,
3041 struct iwl3945_rx_mem_buffer
*rxb
)
3043 struct iwl_rx_packet
*pkt
= (void *)rxb
->skb
->data
;
3044 struct iwl_scanstart_notification
*notif
=
3045 (struct iwl_scanstart_notification
*)pkt
->u
.raw
;
3046 priv
->scan_start_tsf
= le32_to_cpu(notif
->tsf_low
);
3047 IWL_DEBUG_SCAN("Scan start: "
3049 "(TSF: 0x%08X:%08X) - %d (beacon timer %u)\n",
3051 notif
->band
? "bg" : "a",
3053 notif
->tsf_low
, notif
->status
, notif
->beacon_timer
);
3056 /* Service SCAN_RESULTS_NOTIFICATION (0x83) */
3057 static void iwl3945_rx_scan_results_notif(struct iwl3945_priv
*priv
,
3058 struct iwl3945_rx_mem_buffer
*rxb
)
3060 struct iwl_rx_packet
*pkt
= (void *)rxb
->skb
->data
;
3061 struct iwl_scanresults_notification
*notif
=
3062 (struct iwl_scanresults_notification
*)pkt
->u
.raw
;
3064 IWL_DEBUG_SCAN("Scan ch.res: "
3066 "(TSF: 0x%08X:%08X) - %d "
3067 "elapsed=%lu usec (%dms since last)\n",
3069 notif
->band
? "bg" : "a",
3070 le32_to_cpu(notif
->tsf_high
),
3071 le32_to_cpu(notif
->tsf_low
),
3072 le32_to_cpu(notif
->statistics
[0]),
3073 le32_to_cpu(notif
->tsf_low
) - priv
->scan_start_tsf
,
3074 jiffies_to_msecs(elapsed_jiffies
3075 (priv
->last_scan_jiffies
, jiffies
)));
3077 priv
->last_scan_jiffies
= jiffies
;
3078 priv
->next_scan_jiffies
= 0;
3081 /* Service SCAN_COMPLETE_NOTIFICATION (0x84) */
3082 static void iwl3945_rx_scan_complete_notif(struct iwl3945_priv
*priv
,
3083 struct iwl3945_rx_mem_buffer
*rxb
)
3085 struct iwl_rx_packet
*pkt
= (void *)rxb
->skb
->data
;
3086 struct iwl_scancomplete_notification
*scan_notif
= (void *)pkt
->u
.raw
;
3088 IWL_DEBUG_SCAN("Scan complete: %d channels (TSF 0x%08X:%08X) - %d\n",
3089 scan_notif
->scanned_channels
,
3090 scan_notif
->tsf_low
,
3091 scan_notif
->tsf_high
, scan_notif
->status
);
3093 /* The HW is no longer scanning */
3094 clear_bit(STATUS_SCAN_HW
, &priv
->status
);
3096 /* The scan completion notification came in, so kill that timer... */
3097 cancel_delayed_work(&priv
->scan_check
);
3099 IWL_DEBUG_INFO("Scan pass on %sGHz took %dms\n",
3100 (priv
->scan_bands
& BIT(IEEE80211_BAND_2GHZ
)) ?
3102 jiffies_to_msecs(elapsed_jiffies
3103 (priv
->scan_pass_start
, jiffies
)));
3105 /* Remove this scanned band from the list of pending
3106 * bands to scan, band G precedes A in order of scanning
3107 * as seen in iwl3945_bg_request_scan */
3108 if (priv
->scan_bands
& BIT(IEEE80211_BAND_2GHZ
))
3109 priv
->scan_bands
&= ~BIT(IEEE80211_BAND_2GHZ
);
3110 else if (priv
->scan_bands
& BIT(IEEE80211_BAND_5GHZ
))
3111 priv
->scan_bands
&= ~BIT(IEEE80211_BAND_5GHZ
);
3113 /* If a request to abort was given, or the scan did not succeed
3114 * then we reset the scan state machine and terminate,
3115 * re-queuing another scan if one has been requested */
3116 if (test_bit(STATUS_SCAN_ABORTING
, &priv
->status
)) {
3117 IWL_DEBUG_INFO("Aborted scan completed.\n");
3118 clear_bit(STATUS_SCAN_ABORTING
, &priv
->status
);
3120 /* If there are more bands on this scan pass reschedule */
3121 if (priv
->scan_bands
> 0)
3125 priv
->last_scan_jiffies
= jiffies
;
3126 priv
->next_scan_jiffies
= 0;
3127 IWL_DEBUG_INFO("Setting scan to off\n");
3129 clear_bit(STATUS_SCANNING
, &priv
->status
);
3131 IWL_DEBUG_INFO("Scan took %dms\n",
3132 jiffies_to_msecs(elapsed_jiffies(priv
->scan_start
, jiffies
)));
3134 queue_work(priv
->workqueue
, &priv
->scan_completed
);
3139 priv
->scan_pass_start
= jiffies
;
3140 queue_work(priv
->workqueue
, &priv
->request_scan
);
3143 /* Handle notification from uCode that card's power state is changing
3144 * due to software, hardware, or critical temperature RFKILL */
3145 static void iwl3945_rx_card_state_notif(struct iwl3945_priv
*priv
,
3146 struct iwl3945_rx_mem_buffer
*rxb
)
3148 struct iwl_rx_packet
*pkt
= (void *)rxb
->skb
->data
;
3149 u32 flags
= le32_to_cpu(pkt
->u
.card_state_notif
.flags
);
3150 unsigned long status
= priv
->status
;
3152 IWL_DEBUG_RF_KILL("Card state received: HW:%s SW:%s\n",
3153 (flags
& HW_CARD_DISABLED
) ? "Kill" : "On",
3154 (flags
& SW_CARD_DISABLED
) ? "Kill" : "On");
3156 iwl3945_write32(priv
, CSR_UCODE_DRV_GP1_SET
,
3157 CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED
);
3159 if (flags
& HW_CARD_DISABLED
)
3160 set_bit(STATUS_RF_KILL_HW
, &priv
->status
);
3162 clear_bit(STATUS_RF_KILL_HW
, &priv
->status
);
3165 if (flags
& SW_CARD_DISABLED
)
3166 set_bit(STATUS_RF_KILL_SW
, &priv
->status
);
3168 clear_bit(STATUS_RF_KILL_SW
, &priv
->status
);
3170 iwl3945_scan_cancel(priv
);
3172 if ((test_bit(STATUS_RF_KILL_HW
, &status
) !=
3173 test_bit(STATUS_RF_KILL_HW
, &priv
->status
)) ||
3174 (test_bit(STATUS_RF_KILL_SW
, &status
) !=
3175 test_bit(STATUS_RF_KILL_SW
, &priv
->status
)))
3176 queue_work(priv
->workqueue
, &priv
->rf_kill
);
3178 wake_up_interruptible(&priv
->wait_command_queue
);
3182 * iwl3945_setup_rx_handlers - Initialize Rx handler callbacks
3184 * Setup the RX handlers for each of the reply types sent from the uCode
3187 * This function chains into the hardware specific files for them to setup
3188 * any hardware specific handlers as well.
3190 static void iwl3945_setup_rx_handlers(struct iwl3945_priv
*priv
)
3192 priv
->rx_handlers
[REPLY_ALIVE
] = iwl3945_rx_reply_alive
;
3193 priv
->rx_handlers
[REPLY_ADD_STA
] = iwl3945_rx_reply_add_sta
;
3194 priv
->rx_handlers
[REPLY_ERROR
] = iwl3945_rx_reply_error
;
3195 priv
->rx_handlers
[CHANNEL_SWITCH_NOTIFICATION
] = iwl3945_rx_csa
;
3196 priv
->rx_handlers
[SPECTRUM_MEASURE_NOTIFICATION
] =
3197 iwl3945_rx_spectrum_measure_notif
;
3198 priv
->rx_handlers
[PM_SLEEP_NOTIFICATION
] = iwl3945_rx_pm_sleep_notif
;
3199 priv
->rx_handlers
[PM_DEBUG_STATISTIC_NOTIFIC
] =
3200 iwl3945_rx_pm_debug_statistics_notif
;
3201 priv
->rx_handlers
[BEACON_NOTIFICATION
] = iwl3945_rx_beacon_notif
;
3204 * The same handler is used for both the REPLY to a discrete
3205 * statistics request from the host as well as for the periodic
3206 * statistics notifications (after received beacons) from the uCode.
3208 priv
->rx_handlers
[REPLY_STATISTICS_CMD
] = iwl3945_hw_rx_statistics
;
3209 priv
->rx_handlers
[STATISTICS_NOTIFICATION
] = iwl3945_hw_rx_statistics
;
3211 priv
->rx_handlers
[REPLY_SCAN_CMD
] = iwl3945_rx_reply_scan
;
3212 priv
->rx_handlers
[SCAN_START_NOTIFICATION
] = iwl3945_rx_scan_start_notif
;
3213 priv
->rx_handlers
[SCAN_RESULTS_NOTIFICATION
] =
3214 iwl3945_rx_scan_results_notif
;
3215 priv
->rx_handlers
[SCAN_COMPLETE_NOTIFICATION
] =
3216 iwl3945_rx_scan_complete_notif
;
3217 priv
->rx_handlers
[CARD_STATE_NOTIFICATION
] = iwl3945_rx_card_state_notif
;
3219 /* Set up hardware specific Rx handlers */
3220 iwl3945_hw_rx_handler_setup(priv
);
3224 * iwl3945_cmd_queue_reclaim - Reclaim CMD queue entries
3225 * When FW advances 'R' index, all entries between old and new 'R' index
3226 * need to be reclaimed.
3228 static void iwl3945_cmd_queue_reclaim(struct iwl3945_priv
*priv
,
3229 int txq_id
, int index
)
3231 struct iwl3945_tx_queue
*txq
= &priv
->txq
[txq_id
];
3232 struct iwl_queue
*q
= &txq
->q
;
3235 if ((index
>= q
->n_bd
) || (iwl3945_x2_queue_used(q
, index
) == 0)) {
3236 IWL_ERROR("Read index for DMA queue txq id (%d), index %d, "
3237 "is out of range [0-%d] %d %d.\n", txq_id
,
3238 index
, q
->n_bd
, q
->write_ptr
, q
->read_ptr
);
3242 for (index
= iwl_queue_inc_wrap(index
, q
->n_bd
); q
->read_ptr
!= index
;
3243 q
->read_ptr
= iwl_queue_inc_wrap(q
->read_ptr
, q
->n_bd
)) {
3245 IWL_ERROR("HCMD skipped: index (%d) %d %d\n", index
,
3246 q
->write_ptr
, q
->read_ptr
);
3247 queue_work(priv
->workqueue
, &priv
->restart
);
3256 * iwl3945_tx_cmd_complete - Pull unused buffers off the queue and reclaim them
3257 * @rxb: Rx buffer to reclaim
3259 * If an Rx buffer has an async callback associated with it the callback
3260 * will be executed. The attached skb (if present) will only be freed
3261 * if the callback returns 1
3263 static void iwl3945_tx_cmd_complete(struct iwl3945_priv
*priv
,
3264 struct iwl3945_rx_mem_buffer
*rxb
)
3266 struct iwl_rx_packet
*pkt
= (struct iwl_rx_packet
*)rxb
->skb
->data
;
3267 u16 sequence
= le16_to_cpu(pkt
->hdr
.sequence
);
3268 int txq_id
= SEQ_TO_QUEUE(sequence
);
3269 int index
= SEQ_TO_INDEX(sequence
);
3270 int huge
= !!(pkt
->hdr
.sequence
& SEQ_HUGE_FRAME
);
3272 struct iwl3945_cmd
*cmd
;
3274 BUG_ON(txq_id
!= IWL_CMD_QUEUE_NUM
);
3276 cmd_index
= get_cmd_index(&priv
->txq
[IWL_CMD_QUEUE_NUM
].q
, index
, huge
);
3277 cmd
= &priv
->txq
[IWL_CMD_QUEUE_NUM
].cmd
[cmd_index
];
3279 /* Input error checking is done when commands are added to queue. */
3280 if (cmd
->meta
.flags
& CMD_WANT_SKB
) {
3281 cmd
->meta
.source
->u
.skb
= rxb
->skb
;
3283 } else if (cmd
->meta
.u
.callback
&&
3284 !cmd
->meta
.u
.callback(priv
, cmd
, rxb
->skb
))
3287 iwl3945_cmd_queue_reclaim(priv
, txq_id
, index
);
3289 if (!(cmd
->meta
.flags
& CMD_ASYNC
)) {
3290 clear_bit(STATUS_HCMD_ACTIVE
, &priv
->status
);
3291 wake_up_interruptible(&priv
->wait_command_queue
);
3295 /************************** RX-FUNCTIONS ****************************/
3297 * Rx theory of operation
3299 * The host allocates 32 DMA target addresses and passes the host address
3300 * to the firmware at register IWL_RFDS_TABLE_LOWER + N * RFD_SIZE where N is
3304 * The host/firmware share two index registers for managing the Rx buffers.
3306 * The READ index maps to the first position that the firmware may be writing
3307 * to -- the driver can read up to (but not including) this position and get
3309 * The READ index is managed by the firmware once the card is enabled.
3311 * The WRITE index maps to the last position the driver has read from -- the
3312 * position preceding WRITE is the last slot the firmware can place a packet.
3314 * The queue is empty (no good data) if WRITE = READ - 1, and is full if
3317 * During initialization, the host sets up the READ queue position to the first
3318 * INDEX position, and WRITE to the last (READ - 1 wrapped)
3320 * When the firmware places a packet in a buffer, it will advance the READ index
3321 * and fire the RX interrupt. The driver can then query the READ index and
3322 * process as many packets as possible, moving the WRITE index forward as it
3323 * resets the Rx queue buffers with new memory.
3325 * The management in the driver is as follows:
3326 * + A list of pre-allocated SKBs is stored in iwl->rxq->rx_free. When
3327 * iwl->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled
3328 * to replenish the iwl->rxq->rx_free.
3329 * + In iwl3945_rx_replenish (scheduled) if 'processed' != 'read' then the
3330 * iwl->rxq is replenished and the READ INDEX is updated (updating the
3331 * 'processed' and 'read' driver indexes as well)
3332 * + A received packet is processed and handed to the kernel network stack,
3333 * detached from the iwl->rxq. The driver 'processed' index is updated.
3334 * + The Host/Firmware iwl->rxq is replenished at tasklet time from the rx_free
3335 * list. If there are no allocated buffers in iwl->rxq->rx_free, the READ
3336 * INDEX is not incremented and iwl->status(RX_STALLED) is set. If there
3337 * were enough free buffers and RX_STALLED is set it is cleared.
3342 * iwl3945_rx_queue_alloc() Allocates rx_free
3343 * iwl3945_rx_replenish() Replenishes rx_free list from rx_used, and calls
3344 * iwl3945_rx_queue_restock
3345 * iwl3945_rx_queue_restock() Moves available buffers from rx_free into Rx
3346 * queue, updates firmware pointers, and updates
3347 * the WRITE index. If insufficient rx_free buffers
3348 * are available, schedules iwl3945_rx_replenish
3350 * -- enable interrupts --
3351 * ISR - iwl3945_rx() Detach iwl3945_rx_mem_buffers from pool up to the
3352 * READ INDEX, detaching the SKB from the pool.
3353 * Moves the packet buffer from queue to rx_used.
3354 * Calls iwl3945_rx_queue_restock to refill any empty
3361 * iwl3945_rx_queue_space - Return number of free slots available in queue.
3363 static int iwl3945_rx_queue_space(const struct iwl3945_rx_queue
*q
)
3365 int s
= q
->read
- q
->write
;
3368 /* keep some buffer to not confuse full and empty queue */
3376 * iwl3945_rx_queue_update_write_ptr - Update the write pointer for the RX queue
3378 int iwl3945_rx_queue_update_write_ptr(struct iwl3945_priv
*priv
, struct iwl3945_rx_queue
*q
)
3382 unsigned long flags
;
3384 spin_lock_irqsave(&q
->lock
, flags
);
3386 if (q
->need_update
== 0)
3389 /* If power-saving is in use, make sure device is awake */
3390 if (test_bit(STATUS_POWER_PMI
, &priv
->status
)) {
3391 reg
= iwl3945_read32(priv
, CSR_UCODE_DRV_GP1
);
3393 if (reg
& CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP
) {
3394 iwl3945_set_bit(priv
, CSR_GP_CNTRL
,
3395 CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ
);
3399 rc
= iwl3945_grab_nic_access(priv
);
3403 /* Device expects a multiple of 8 */
3404 iwl3945_write_direct32(priv
, FH39_RSCSR_CHNL0_WPTR
,
3406 iwl3945_release_nic_access(priv
);
3408 /* Else device is assumed to be awake */
3410 /* Device expects a multiple of 8 */
3411 iwl3945_write32(priv
, FH39_RSCSR_CHNL0_WPTR
, q
->write
& ~0x7);
3417 spin_unlock_irqrestore(&q
->lock
, flags
);
3422 * iwl3945_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr
3424 static inline __le32
iwl3945_dma_addr2rbd_ptr(struct iwl3945_priv
*priv
,
3425 dma_addr_t dma_addr
)
3427 return cpu_to_le32((u32
)dma_addr
);
3431 * iwl3945_rx_queue_restock - refill RX queue from pre-allocated pool
3433 * If there are slots in the RX queue that need to be restocked,
3434 * and we have free pre-allocated buffers, fill the ranks as much
3435 * as we can, pulling from rx_free.
3437 * This moves the 'write' index forward to catch up with 'processed', and
3438 * also updates the memory address in the firmware to reference the new
3441 static int iwl3945_rx_queue_restock(struct iwl3945_priv
*priv
)
3443 struct iwl3945_rx_queue
*rxq
= &priv
->rxq
;
3444 struct list_head
*element
;
3445 struct iwl3945_rx_mem_buffer
*rxb
;
3446 unsigned long flags
;
3449 spin_lock_irqsave(&rxq
->lock
, flags
);
3450 write
= rxq
->write
& ~0x7;
3451 while ((iwl3945_rx_queue_space(rxq
) > 0) && (rxq
->free_count
)) {
3452 /* Get next free Rx buffer, remove from free list */
3453 element
= rxq
->rx_free
.next
;
3454 rxb
= list_entry(element
, struct iwl3945_rx_mem_buffer
, list
);
3457 /* Point to Rx buffer via next RBD in circular buffer */
3458 rxq
->bd
[rxq
->write
] = iwl3945_dma_addr2rbd_ptr(priv
, rxb
->dma_addr
);
3459 rxq
->queue
[rxq
->write
] = rxb
;
3460 rxq
->write
= (rxq
->write
+ 1) & RX_QUEUE_MASK
;
3463 spin_unlock_irqrestore(&rxq
->lock
, flags
);
3464 /* If the pre-allocated buffer pool is dropping low, schedule to
3466 if (rxq
->free_count
<= RX_LOW_WATERMARK
)
3467 queue_work(priv
->workqueue
, &priv
->rx_replenish
);
3470 /* If we've added more space for the firmware to place data, tell it.
3471 * Increment device's write pointer in multiples of 8. */
3472 if ((write
!= (rxq
->write
& ~0x7))
3473 || (abs(rxq
->write
- rxq
->read
) > 7)) {
3474 spin_lock_irqsave(&rxq
->lock
, flags
);
3475 rxq
->need_update
= 1;
3476 spin_unlock_irqrestore(&rxq
->lock
, flags
);
3477 rc
= iwl3945_rx_queue_update_write_ptr(priv
, rxq
);
3486 * iwl3945_rx_replenish - Move all used packet from rx_used to rx_free
3488 * When moving to rx_free an SKB is allocated for the slot.
3490 * Also restock the Rx queue via iwl3945_rx_queue_restock.
3491 * This is called as a scheduled work item (except for during initialization)
3493 static void iwl3945_rx_allocate(struct iwl3945_priv
*priv
)
3495 struct iwl3945_rx_queue
*rxq
= &priv
->rxq
;
3496 struct list_head
*element
;
3497 struct iwl3945_rx_mem_buffer
*rxb
;
3498 unsigned long flags
;
3499 spin_lock_irqsave(&rxq
->lock
, flags
);
3500 while (!list_empty(&rxq
->rx_used
)) {
3501 element
= rxq
->rx_used
.next
;
3502 rxb
= list_entry(element
, struct iwl3945_rx_mem_buffer
, list
);
3504 /* Alloc a new receive buffer */
3506 alloc_skb(IWL_RX_BUF_SIZE
, __GFP_NOWARN
| GFP_ATOMIC
);
3508 if (net_ratelimit())
3509 printk(KERN_CRIT DRV_NAME
3510 ": Can not allocate SKB buffers\n");
3511 /* We don't reschedule replenish work here -- we will
3512 * call the restock method and if it still needs
3513 * more buffers it will schedule replenish */
3517 /* If radiotap head is required, reserve some headroom here.
3518 * The physical head count is a variable rx_stats->phy_count.
3519 * We reserve 4 bytes here. Plus these extra bytes, the
3520 * headroom of the physical head should be enough for the
3521 * radiotap head that iwl3945 supported. See iwl3945_rt.
3523 skb_reserve(rxb
->skb
, 4);
3525 priv
->alloc_rxb_skb
++;
3528 /* Get physical address of RB/SKB */
3530 pci_map_single(priv
->pci_dev
, rxb
->skb
->data
,
3531 IWL_RX_BUF_SIZE
, PCI_DMA_FROMDEVICE
);
3532 list_add_tail(&rxb
->list
, &rxq
->rx_free
);
3535 spin_unlock_irqrestore(&rxq
->lock
, flags
);
3539 * this should be called while priv->lock is locked
3541 static void __iwl3945_rx_replenish(void *data
)
3543 struct iwl3945_priv
*priv
= data
;
3545 iwl3945_rx_allocate(priv
);
3546 iwl3945_rx_queue_restock(priv
);
3550 void iwl3945_rx_replenish(void *data
)
3552 struct iwl3945_priv
*priv
= data
;
3553 unsigned long flags
;
3555 iwl3945_rx_allocate(priv
);
3557 spin_lock_irqsave(&priv
->lock
, flags
);
3558 iwl3945_rx_queue_restock(priv
);
3559 spin_unlock_irqrestore(&priv
->lock
, flags
);
3562 /* Assumes that the skb field of the buffers in 'pool' is kept accurate.
3563 * If an SKB has been detached, the POOL needs to have its SKB set to NULL
3564 * This free routine walks the list of POOL entries and if SKB is set to
3565 * non NULL it is unmapped and freed
3567 static void iwl3945_rx_queue_free(struct iwl3945_priv
*priv
, struct iwl3945_rx_queue
*rxq
)
3570 for (i
= 0; i
< RX_QUEUE_SIZE
+ RX_FREE_BUFFERS
; i
++) {
3571 if (rxq
->pool
[i
].skb
!= NULL
) {
3572 pci_unmap_single(priv
->pci_dev
,
3573 rxq
->pool
[i
].dma_addr
,
3574 IWL_RX_BUF_SIZE
, PCI_DMA_FROMDEVICE
);
3575 dev_kfree_skb(rxq
->pool
[i
].skb
);
3579 pci_free_consistent(priv
->pci_dev
, 4 * RX_QUEUE_SIZE
, rxq
->bd
,
3584 int iwl3945_rx_queue_alloc(struct iwl3945_priv
*priv
)
3586 struct iwl3945_rx_queue
*rxq
= &priv
->rxq
;
3587 struct pci_dev
*dev
= priv
->pci_dev
;
3590 spin_lock_init(&rxq
->lock
);
3591 INIT_LIST_HEAD(&rxq
->rx_free
);
3592 INIT_LIST_HEAD(&rxq
->rx_used
);
3594 /* Alloc the circular buffer of Read Buffer Descriptors (RBDs) */
3595 rxq
->bd
= pci_alloc_consistent(dev
, 4 * RX_QUEUE_SIZE
, &rxq
->dma_addr
);
3599 /* Fill the rx_used queue with _all_ of the Rx buffers */
3600 for (i
= 0; i
< RX_FREE_BUFFERS
+ RX_QUEUE_SIZE
; i
++)
3601 list_add_tail(&rxq
->pool
[i
].list
, &rxq
->rx_used
);
3603 /* Set us so that we have processed and used all buffers, but have
3604 * not restocked the Rx queue with fresh buffers */
3605 rxq
->read
= rxq
->write
= 0;
3606 rxq
->free_count
= 0;
3607 rxq
->need_update
= 0;
3611 void iwl3945_rx_queue_reset(struct iwl3945_priv
*priv
, struct iwl3945_rx_queue
*rxq
)
3613 unsigned long flags
;
3615 spin_lock_irqsave(&rxq
->lock
, flags
);
3616 INIT_LIST_HEAD(&rxq
->rx_free
);
3617 INIT_LIST_HEAD(&rxq
->rx_used
);
3618 /* Fill the rx_used queue with _all_ of the Rx buffers */
3619 for (i
= 0; i
< RX_FREE_BUFFERS
+ RX_QUEUE_SIZE
; i
++) {
3620 /* In the reset function, these buffers may have been allocated
3621 * to an SKB, so we need to unmap and free potential storage */
3622 if (rxq
->pool
[i
].skb
!= NULL
) {
3623 pci_unmap_single(priv
->pci_dev
,
3624 rxq
->pool
[i
].dma_addr
,
3625 IWL_RX_BUF_SIZE
, PCI_DMA_FROMDEVICE
);
3626 priv
->alloc_rxb_skb
--;
3627 dev_kfree_skb(rxq
->pool
[i
].skb
);
3628 rxq
->pool
[i
].skb
= NULL
;
3630 list_add_tail(&rxq
->pool
[i
].list
, &rxq
->rx_used
);
3633 /* Set us so that we have processed and used all buffers, but have
3634 * not restocked the Rx queue with fresh buffers */
3635 rxq
->read
= rxq
->write
= 0;
3636 rxq
->free_count
= 0;
3637 spin_unlock_irqrestore(&rxq
->lock
, flags
);
3640 /* Convert linear signal-to-noise ratio into dB */
3641 static u8 ratio2dB
[100] = {
3642 /* 0 1 2 3 4 5 6 7 8 9 */
3643 0, 0, 6, 10, 12, 14, 16, 17, 18, 19, /* 00 - 09 */
3644 20, 21, 22, 22, 23, 23, 24, 25, 26, 26, /* 10 - 19 */
3645 26, 26, 26, 27, 27, 28, 28, 28, 29, 29, /* 20 - 29 */
3646 29, 30, 30, 30, 31, 31, 31, 31, 32, 32, /* 30 - 39 */
3647 32, 32, 32, 33, 33, 33, 33, 33, 34, 34, /* 40 - 49 */
3648 34, 34, 34, 34, 35, 35, 35, 35, 35, 35, /* 50 - 59 */
3649 36, 36, 36, 36, 36, 36, 36, 37, 37, 37, /* 60 - 69 */
3650 37, 37, 37, 37, 37, 38, 38, 38, 38, 38, /* 70 - 79 */
3651 38, 38, 38, 38, 38, 39, 39, 39, 39, 39, /* 80 - 89 */
3652 39, 39, 39, 39, 39, 40, 40, 40, 40, 40 /* 90 - 99 */
3655 /* Calculates a relative dB value from a ratio of linear
3656 * (i.e. not dB) signal levels.
3657 * Conversion assumes that levels are voltages (20*log), not powers (10*log). */
3658 int iwl3945_calc_db_from_ratio(int sig_ratio
)
3660 /* 1000:1 or higher just report as 60 dB */
3661 if (sig_ratio
>= 1000)
3664 /* 100:1 or higher, divide by 10 and use table,
3665 * add 20 dB to make up for divide by 10 */
3666 if (sig_ratio
>= 100)
3667 return 20 + (int)ratio2dB
[sig_ratio
/10];
3669 /* We shouldn't see this */
3673 /* Use table for ratios 1:1 - 99:1 */
3674 return (int)ratio2dB
[sig_ratio
];
3677 #define PERFECT_RSSI (-20) /* dBm */
3678 #define WORST_RSSI (-95) /* dBm */
3679 #define RSSI_RANGE (PERFECT_RSSI - WORST_RSSI)
3681 /* Calculate an indication of rx signal quality (a percentage, not dBm!).
3682 * See http://www.ces.clemson.edu/linux/signal_quality.shtml for info
3683 * about formulas used below. */
3684 int iwl3945_calc_sig_qual(int rssi_dbm
, int noise_dbm
)
3687 int degradation
= PERFECT_RSSI
- rssi_dbm
;
3689 /* If we get a noise measurement, use signal-to-noise ratio (SNR)
3690 * as indicator; formula is (signal dbm - noise dbm).
3691 * SNR at or above 40 is a great signal (100%).
3692 * Below that, scale to fit SNR of 0 - 40 dB within 0 - 100% indicator.
3693 * Weakest usable signal is usually 10 - 15 dB SNR. */
3695 if (rssi_dbm
- noise_dbm
>= 40)
3697 else if (rssi_dbm
< noise_dbm
)
3699 sig_qual
= ((rssi_dbm
- noise_dbm
) * 5) / 2;
3701 /* Else use just the signal level.
3702 * This formula is a least squares fit of data points collected and
3703 * compared with a reference system that had a percentage (%) display
3704 * for signal quality. */
3706 sig_qual
= (100 * (RSSI_RANGE
* RSSI_RANGE
) - degradation
*
3707 (15 * RSSI_RANGE
+ 62 * degradation
)) /
3708 (RSSI_RANGE
* RSSI_RANGE
);
3712 else if (sig_qual
< 1)
3719 * iwl3945_rx_handle - Main entry function for receiving responses from uCode
3721 * Uses the priv->rx_handlers callback function array to invoke
3722 * the appropriate handlers, including command responses,
3723 * frame-received notifications, and other notifications.
3725 static void iwl3945_rx_handle(struct iwl3945_priv
*priv
)
3727 struct iwl3945_rx_mem_buffer
*rxb
;
3728 struct iwl_rx_packet
*pkt
;
3729 struct iwl3945_rx_queue
*rxq
= &priv
->rxq
;
3732 unsigned long flags
;
3736 /* uCode's read index (stored in shared DRAM) indicates the last Rx
3737 * buffer that the driver may process (last buffer filled by ucode). */
3738 r
= iwl3945_hw_get_rx_read(priv
);
3741 if (iwl3945_rx_queue_space(rxq
) > (RX_QUEUE_SIZE
/ 2))
3743 /* Rx interrupt, but nothing sent from uCode */
3745 IWL_DEBUG(IWL_DL_RX
| IWL_DL_ISR
, "r = %d, i = %d\n", r
, i
);
3748 rxb
= rxq
->queue
[i
];
3750 /* If an RXB doesn't have a Rx queue slot associated with it,
3751 * then a bug has been introduced in the queue refilling
3752 * routines -- catch it here */
3753 BUG_ON(rxb
== NULL
);
3755 rxq
->queue
[i
] = NULL
;
3757 pci_dma_sync_single_for_cpu(priv
->pci_dev
, rxb
->dma_addr
,
3759 PCI_DMA_FROMDEVICE
);
3760 pkt
= (struct iwl_rx_packet
*)rxb
->skb
->data
;
3762 /* Reclaim a command buffer only if this packet is a response
3763 * to a (driver-originated) command.
3764 * If the packet (e.g. Rx frame) originated from uCode,
3765 * there is no command buffer to reclaim.
3766 * Ucode should set SEQ_RX_FRAME bit if ucode-originated,
3767 * but apparently a few don't get set; catch them here. */
3768 reclaim
= !(pkt
->hdr
.sequence
& SEQ_RX_FRAME
) &&
3769 (pkt
->hdr
.cmd
!= STATISTICS_NOTIFICATION
) &&
3770 (pkt
->hdr
.cmd
!= REPLY_TX
);
3772 /* Based on type of command response or notification,
3773 * handle those that need handling via function in
3774 * rx_handlers table. See iwl3945_setup_rx_handlers() */
3775 if (priv
->rx_handlers
[pkt
->hdr
.cmd
]) {
3776 IWL_DEBUG(IWL_DL_HCMD
| IWL_DL_RX
| IWL_DL_ISR
,
3777 "r = %d, i = %d, %s, 0x%02x\n", r
, i
,
3778 get_cmd_string(pkt
->hdr
.cmd
), pkt
->hdr
.cmd
);
3779 priv
->rx_handlers
[pkt
->hdr
.cmd
] (priv
, rxb
);
3781 /* No handling needed */
3782 IWL_DEBUG(IWL_DL_HCMD
| IWL_DL_RX
| IWL_DL_ISR
,
3783 "r %d i %d No handler needed for %s, 0x%02x\n",
3784 r
, i
, get_cmd_string(pkt
->hdr
.cmd
),
3789 /* Invoke any callbacks, transfer the skb to caller, and
3790 * fire off the (possibly) blocking iwl3945_send_cmd()
3791 * as we reclaim the driver command queue */
3792 if (rxb
&& rxb
->skb
)
3793 iwl3945_tx_cmd_complete(priv
, rxb
);
3795 IWL_WARNING("Claim null rxb?\n");
3798 /* For now we just don't re-use anything. We can tweak this
3799 * later to try and re-use notification packets and SKBs that
3800 * fail to Rx correctly */
3801 if (rxb
->skb
!= NULL
) {
3802 priv
->alloc_rxb_skb
--;
3803 dev_kfree_skb_any(rxb
->skb
);
3807 pci_unmap_single(priv
->pci_dev
, rxb
->dma_addr
,
3808 IWL_RX_BUF_SIZE
, PCI_DMA_FROMDEVICE
);
3809 spin_lock_irqsave(&rxq
->lock
, flags
);
3810 list_add_tail(&rxb
->list
, &priv
->rxq
.rx_used
);
3811 spin_unlock_irqrestore(&rxq
->lock
, flags
);
3812 i
= (i
+ 1) & RX_QUEUE_MASK
;
3813 /* If there are a lot of unused frames,
3814 * restock the Rx queue so ucode won't assert. */
3819 __iwl3945_rx_replenish(priv
);
3825 /* Backtrack one entry */
3827 iwl3945_rx_queue_restock(priv
);
3831 * iwl3945_tx_queue_update_write_ptr - Send new write index to hardware
3833 static int iwl3945_tx_queue_update_write_ptr(struct iwl3945_priv
*priv
,
3834 struct iwl3945_tx_queue
*txq
)
3838 int txq_id
= txq
->q
.id
;
3840 if (txq
->need_update
== 0)
3843 /* if we're trying to save power */
3844 if (test_bit(STATUS_POWER_PMI
, &priv
->status
)) {
3845 /* wake up nic if it's powered down ...
3846 * uCode will wake up, and interrupt us again, so next
3847 * time we'll skip this part. */
3848 reg
= iwl3945_read32(priv
, CSR_UCODE_DRV_GP1
);
3850 if (reg
& CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP
) {
3851 IWL_DEBUG_INFO("Requesting wakeup, GP1 = 0x%x\n", reg
);
3852 iwl3945_set_bit(priv
, CSR_GP_CNTRL
,
3853 CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ
);
3857 /* restore this queue's parameters in nic hardware. */
3858 rc
= iwl3945_grab_nic_access(priv
);
3861 iwl3945_write_direct32(priv
, HBUS_TARG_WRPTR
,
3862 txq
->q
.write_ptr
| (txq_id
<< 8));
3863 iwl3945_release_nic_access(priv
);
3865 /* else not in power-save mode, uCode will never sleep when we're
3866 * trying to tx (during RFKILL, we're not trying to tx). */
3868 iwl3945_write32(priv
, HBUS_TARG_WRPTR
,
3869 txq
->q
.write_ptr
| (txq_id
<< 8));
3871 txq
->need_update
= 0;
3876 #ifdef CONFIG_IWL3945_DEBUG
3877 static void iwl3945_print_rx_config_cmd(struct iwl3945_priv
*priv
,
3878 struct iwl3945_rxon_cmd
*rxon
)
3880 IWL_DEBUG_RADIO("RX CONFIG:\n");
3881 iwl_print_hex_dump(priv
, IWL_DL_RADIO
, (u8
*) rxon
, sizeof(*rxon
));
3882 IWL_DEBUG_RADIO("u16 channel: 0x%x\n", le16_to_cpu(rxon
->channel
));
3883 IWL_DEBUG_RADIO("u32 flags: 0x%08X\n", le32_to_cpu(rxon
->flags
));
3884 IWL_DEBUG_RADIO("u32 filter_flags: 0x%08x\n",
3885 le32_to_cpu(rxon
->filter_flags
));
3886 IWL_DEBUG_RADIO("u8 dev_type: 0x%x\n", rxon
->dev_type
);
3887 IWL_DEBUG_RADIO("u8 ofdm_basic_rates: 0x%02x\n",
3888 rxon
->ofdm_basic_rates
);
3889 IWL_DEBUG_RADIO("u8 cck_basic_rates: 0x%02x\n", rxon
->cck_basic_rates
);
3890 IWL_DEBUG_RADIO("u8[6] node_addr: %pM\n", rxon
->node_addr
);
3891 IWL_DEBUG_RADIO("u8[6] bssid_addr: %pM\n", rxon
->bssid_addr
);
3892 IWL_DEBUG_RADIO("u16 assoc_id: 0x%x\n", le16_to_cpu(rxon
->assoc_id
));
3896 static void iwl3945_enable_interrupts(struct iwl3945_priv
*priv
)
3898 IWL_DEBUG_ISR("Enabling interrupts\n");
3899 set_bit(STATUS_INT_ENABLED
, &priv
->status
);
3900 iwl3945_write32(priv
, CSR_INT_MASK
, CSR_INI_SET_MASK
);
3904 /* call this function to flush any scheduled tasklet */
3905 static inline void iwl_synchronize_irq(struct iwl3945_priv
*priv
)
3907 /* wait to make sure we flush pending tasklet*/
3908 synchronize_irq(priv
->pci_dev
->irq
);
3909 tasklet_kill(&priv
->irq_tasklet
);
3913 static inline void iwl3945_disable_interrupts(struct iwl3945_priv
*priv
)
3915 clear_bit(STATUS_INT_ENABLED
, &priv
->status
);
3917 /* disable interrupts from uCode/NIC to host */
3918 iwl3945_write32(priv
, CSR_INT_MASK
, 0x00000000);
3920 /* acknowledge/clear/reset any interrupts still pending
3921 * from uCode or flow handler (Rx/Tx DMA) */
3922 iwl3945_write32(priv
, CSR_INT
, 0xffffffff);
3923 iwl3945_write32(priv
, CSR_FH_INT_STATUS
, 0xffffffff);
3924 IWL_DEBUG_ISR("Disabled interrupts\n");
3927 static const char *desc_lookup(int i
)
3935 return "BAD_CHECKSUM";
3937 return "NMI_INTERRUPT";
3941 return "FATAL_ERROR";
3947 #define ERROR_START_OFFSET (1 * sizeof(u32))
3948 #define ERROR_ELEM_SIZE (7 * sizeof(u32))
3950 static void iwl3945_dump_nic_error_log(struct iwl3945_priv
*priv
)
3953 u32 desc
, time
, count
, base
, data1
;
3954 u32 blink1
, blink2
, ilink1
, ilink2
;
3957 base
= le32_to_cpu(priv
->card_alive
.error_event_table_ptr
);
3959 if (!iwl3945_hw_valid_rtc_data_addr(base
)) {
3960 IWL_ERROR("Not valid error log pointer 0x%08X\n", base
);
3964 rc
= iwl3945_grab_nic_access(priv
);
3966 IWL_WARNING("Can not read from adapter at this time.\n");
3970 count
= iwl3945_read_targ_mem(priv
, base
);
3972 if (ERROR_START_OFFSET
<= count
* ERROR_ELEM_SIZE
) {
3973 IWL_ERROR("Start IWL Error Log Dump:\n");
3974 IWL_ERROR("Status: 0x%08lX, count: %d\n", priv
->status
, count
);
3977 IWL_ERROR("Desc Time asrtPC blink2 "
3978 "ilink1 nmiPC Line\n");
3979 for (i
= ERROR_START_OFFSET
;
3980 i
< (count
* ERROR_ELEM_SIZE
) + ERROR_START_OFFSET
;
3981 i
+= ERROR_ELEM_SIZE
) {
3982 desc
= iwl3945_read_targ_mem(priv
, base
+ i
);
3984 iwl3945_read_targ_mem(priv
, base
+ i
+ 1 * sizeof(u32
));
3986 iwl3945_read_targ_mem(priv
, base
+ i
+ 2 * sizeof(u32
));
3988 iwl3945_read_targ_mem(priv
, base
+ i
+ 3 * sizeof(u32
));
3990 iwl3945_read_targ_mem(priv
, base
+ i
+ 4 * sizeof(u32
));
3992 iwl3945_read_targ_mem(priv
, base
+ i
+ 5 * sizeof(u32
));
3994 iwl3945_read_targ_mem(priv
, base
+ i
+ 6 * sizeof(u32
));
3997 ("%-13s (#%d) %010u 0x%05X 0x%05X 0x%05X 0x%05X %u\n\n",
3998 desc_lookup(desc
), desc
, time
, blink1
, blink2
,
3999 ilink1
, ilink2
, data1
);
4002 iwl3945_release_nic_access(priv
);
4006 #define EVENT_START_OFFSET (6 * sizeof(u32))
4009 * iwl3945_print_event_log - Dump error event log to syslog
4011 * NOTE: Must be called with iwl3945_grab_nic_access() already obtained!
4013 static void iwl3945_print_event_log(struct iwl3945_priv
*priv
, u32 start_idx
,
4014 u32 num_events
, u32 mode
)
4017 u32 base
; /* SRAM byte address of event log header */
4018 u32 event_size
; /* 2 u32s, or 3 u32s if timestamp recorded */
4019 u32 ptr
; /* SRAM byte address of log data */
4020 u32 ev
, time
, data
; /* event log data */
4022 if (num_events
== 0)
4025 base
= le32_to_cpu(priv
->card_alive
.log_event_table_ptr
);
4028 event_size
= 2 * sizeof(u32
);
4030 event_size
= 3 * sizeof(u32
);
4032 ptr
= base
+ EVENT_START_OFFSET
+ (start_idx
* event_size
);
4034 /* "time" is actually "data" for mode 0 (no timestamp).
4035 * place event id # at far right for easier visual parsing. */
4036 for (i
= 0; i
< num_events
; i
++) {
4037 ev
= iwl3945_read_targ_mem(priv
, ptr
);
4039 time
= iwl3945_read_targ_mem(priv
, ptr
);
4042 IWL_ERROR("0x%08x\t%04u\n", time
, ev
); /* data, ev */
4044 data
= iwl3945_read_targ_mem(priv
, ptr
);
4046 IWL_ERROR("%010u\t0x%08x\t%04u\n", time
, data
, ev
);
4051 static void iwl3945_dump_nic_event_log(struct iwl3945_priv
*priv
)
4054 u32 base
; /* SRAM byte address of event log header */
4055 u32 capacity
; /* event log capacity in # entries */
4056 u32 mode
; /* 0 - no timestamp, 1 - timestamp recorded */
4057 u32 num_wraps
; /* # times uCode wrapped to top of log */
4058 u32 next_entry
; /* index of next entry to be written by uCode */
4059 u32 size
; /* # entries that we'll print */
4061 base
= le32_to_cpu(priv
->card_alive
.log_event_table_ptr
);
4062 if (!iwl3945_hw_valid_rtc_data_addr(base
)) {
4063 IWL_ERROR("Invalid event log pointer 0x%08X\n", base
);
4067 rc
= iwl3945_grab_nic_access(priv
);
4069 IWL_WARNING("Can not read from adapter at this time.\n");
4073 /* event log header */
4074 capacity
= iwl3945_read_targ_mem(priv
, base
);
4075 mode
= iwl3945_read_targ_mem(priv
, base
+ (1 * sizeof(u32
)));
4076 num_wraps
= iwl3945_read_targ_mem(priv
, base
+ (2 * sizeof(u32
)));
4077 next_entry
= iwl3945_read_targ_mem(priv
, base
+ (3 * sizeof(u32
)));
4079 size
= num_wraps
? capacity
: next_entry
;
4081 /* bail out if nothing in log */
4083 IWL_ERROR("Start IWL Event Log Dump: nothing in log\n");
4084 iwl3945_release_nic_access(priv
);
4088 IWL_ERROR("Start IWL Event Log Dump: display count %d, wraps %d\n",
4091 /* if uCode has wrapped back to top of log, start at the oldest entry,
4092 * i.e the next one that uCode would fill. */
4094 iwl3945_print_event_log(priv
, next_entry
,
4095 capacity
- next_entry
, mode
);
4097 /* (then/else) start at top of log */
4098 iwl3945_print_event_log(priv
, 0, next_entry
, mode
);
4100 iwl3945_release_nic_access(priv
);
4104 * iwl3945_irq_handle_error - called for HW or SW error interrupt from card
4106 static void iwl3945_irq_handle_error(struct iwl3945_priv
*priv
)
4108 /* Set the FW error flag -- cleared on iwl3945_down */
4109 set_bit(STATUS_FW_ERROR
, &priv
->status
);
4111 /* Cancel currently queued command. */
4112 clear_bit(STATUS_HCMD_ACTIVE
, &priv
->status
);
4114 #ifdef CONFIG_IWL3945_DEBUG
4115 if (priv
->debug_level
& IWL_DL_FW_ERRORS
) {
4116 iwl3945_dump_nic_error_log(priv
);
4117 iwl3945_dump_nic_event_log(priv
);
4118 iwl3945_print_rx_config_cmd(priv
, &priv
->staging_rxon
);
4122 wake_up_interruptible(&priv
->wait_command_queue
);
4124 /* Keep the restart process from trying to send host
4125 * commands by clearing the INIT status bit */
4126 clear_bit(STATUS_READY
, &priv
->status
);
4128 if (!test_bit(STATUS_EXIT_PENDING
, &priv
->status
)) {
4129 IWL_DEBUG(IWL_DL_INFO
| IWL_DL_FW_ERRORS
,
4130 "Restarting adapter due to uCode error.\n");
4132 if (iwl3945_is_associated(priv
)) {
4133 memcpy(&priv
->recovery_rxon
, &priv
->active_rxon
,
4134 sizeof(priv
->recovery_rxon
));
4135 priv
->error_recovering
= 1;
4137 queue_work(priv
->workqueue
, &priv
->restart
);
4141 static void iwl3945_error_recovery(struct iwl3945_priv
*priv
)
4143 unsigned long flags
;
4145 memcpy(&priv
->staging_rxon
, &priv
->recovery_rxon
,
4146 sizeof(priv
->staging_rxon
));
4147 priv
->staging_rxon
.filter_flags
&= ~RXON_FILTER_ASSOC_MSK
;
4148 iwl3945_commit_rxon(priv
);
4150 iwl3945_add_station(priv
, priv
->bssid
, 1, 0);
4152 spin_lock_irqsave(&priv
->lock
, flags
);
4153 priv
->assoc_id
= le16_to_cpu(priv
->staging_rxon
.assoc_id
);
4154 priv
->error_recovering
= 0;
4155 spin_unlock_irqrestore(&priv
->lock
, flags
);
4158 static void iwl3945_irq_tasklet(struct iwl3945_priv
*priv
)
4160 u32 inta
, handled
= 0;
4162 unsigned long flags
;
4163 #ifdef CONFIG_IWL3945_DEBUG
4167 spin_lock_irqsave(&priv
->lock
, flags
);
4169 /* Ack/clear/reset pending uCode interrupts.
4170 * Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
4171 * and will clear only when CSR_FH_INT_STATUS gets cleared. */
4172 inta
= iwl3945_read32(priv
, CSR_INT
);
4173 iwl3945_write32(priv
, CSR_INT
, inta
);
4175 /* Ack/clear/reset pending flow-handler (DMA) interrupts.
4176 * Any new interrupts that happen after this, either while we're
4177 * in this tasklet, or later, will show up in next ISR/tasklet. */
4178 inta_fh
= iwl3945_read32(priv
, CSR_FH_INT_STATUS
);
4179 iwl3945_write32(priv
, CSR_FH_INT_STATUS
, inta_fh
);
4181 #ifdef CONFIG_IWL3945_DEBUG
4182 if (priv
->debug_level
& IWL_DL_ISR
) {
4183 /* just for debug */
4184 inta_mask
= iwl3945_read32(priv
, CSR_INT_MASK
);
4185 IWL_DEBUG_ISR("inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
4186 inta
, inta_mask
, inta_fh
);
4190 /* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not
4191 * atomic, make sure that inta covers all the interrupts that
4192 * we've discovered, even if FH interrupt came in just after
4193 * reading CSR_INT. */
4194 if (inta_fh
& CSR39_FH_INT_RX_MASK
)
4195 inta
|= CSR_INT_BIT_FH_RX
;
4196 if (inta_fh
& CSR39_FH_INT_TX_MASK
)
4197 inta
|= CSR_INT_BIT_FH_TX
;
4199 /* Now service all interrupt bits discovered above. */
4200 if (inta
& CSR_INT_BIT_HW_ERR
) {
4201 IWL_ERROR("Microcode HW error detected. Restarting.\n");
4203 /* Tell the device to stop sending interrupts */
4204 iwl3945_disable_interrupts(priv
);
4206 iwl3945_irq_handle_error(priv
);
4208 handled
|= CSR_INT_BIT_HW_ERR
;
4210 spin_unlock_irqrestore(&priv
->lock
, flags
);
4215 #ifdef CONFIG_IWL3945_DEBUG
4216 if (priv
->debug_level
& (IWL_DL_ISR
)) {
4217 /* NIC fires this, but we don't use it, redundant with WAKEUP */
4218 if (inta
& CSR_INT_BIT_SCD
)
4219 IWL_DEBUG_ISR("Scheduler finished to transmit "
4220 "the frame/frames.\n");
4222 /* Alive notification via Rx interrupt will do the real work */
4223 if (inta
& CSR_INT_BIT_ALIVE
)
4224 IWL_DEBUG_ISR("Alive interrupt\n");
4227 /* Safely ignore these bits for debug checks below */
4228 inta
&= ~(CSR_INT_BIT_SCD
| CSR_INT_BIT_ALIVE
);
4230 /* Error detected by uCode */
4231 if (inta
& CSR_INT_BIT_SW_ERR
) {
4232 IWL_ERROR("Microcode SW error detected. Restarting 0x%X.\n",
4234 iwl3945_irq_handle_error(priv
);
4235 handled
|= CSR_INT_BIT_SW_ERR
;
4238 /* uCode wakes up after power-down sleep */
4239 if (inta
& CSR_INT_BIT_WAKEUP
) {
4240 IWL_DEBUG_ISR("Wakeup interrupt\n");
4241 iwl3945_rx_queue_update_write_ptr(priv
, &priv
->rxq
);
4242 iwl3945_tx_queue_update_write_ptr(priv
, &priv
->txq
[0]);
4243 iwl3945_tx_queue_update_write_ptr(priv
, &priv
->txq
[1]);
4244 iwl3945_tx_queue_update_write_ptr(priv
, &priv
->txq
[2]);
4245 iwl3945_tx_queue_update_write_ptr(priv
, &priv
->txq
[3]);
4246 iwl3945_tx_queue_update_write_ptr(priv
, &priv
->txq
[4]);
4247 iwl3945_tx_queue_update_write_ptr(priv
, &priv
->txq
[5]);
4249 handled
|= CSR_INT_BIT_WAKEUP
;
4252 /* All uCode command responses, including Tx command responses,
4253 * Rx "responses" (frame-received notification), and other
4254 * notifications from uCode come through here*/
4255 if (inta
& (CSR_INT_BIT_FH_RX
| CSR_INT_BIT_SW_RX
)) {
4256 iwl3945_rx_handle(priv
);
4257 handled
|= (CSR_INT_BIT_FH_RX
| CSR_INT_BIT_SW_RX
);
4260 if (inta
& CSR_INT_BIT_FH_TX
) {
4261 IWL_DEBUG_ISR("Tx interrupt\n");
4263 iwl3945_write32(priv
, CSR_FH_INT_STATUS
, (1 << 6));
4264 if (!iwl3945_grab_nic_access(priv
)) {
4265 iwl3945_write_direct32(priv
, FH39_TCSR_CREDIT
4266 (FH39_SRVC_CHNL
), 0x0);
4267 iwl3945_release_nic_access(priv
);
4269 handled
|= CSR_INT_BIT_FH_TX
;
4272 if (inta
& ~handled
)
4273 IWL_ERROR("Unhandled INTA bits 0x%08x\n", inta
& ~handled
);
4275 if (inta
& ~CSR_INI_SET_MASK
) {
4276 IWL_WARNING("Disabled INTA bits 0x%08x were pending\n",
4277 inta
& ~CSR_INI_SET_MASK
);
4278 IWL_WARNING(" with FH_INT = 0x%08x\n", inta_fh
);
4281 /* Re-enable all interrupts */
4282 /* only Re-enable if disabled by irq */
4283 if (test_bit(STATUS_INT_ENABLED
, &priv
->status
))
4284 iwl3945_enable_interrupts(priv
);
4286 #ifdef CONFIG_IWL3945_DEBUG
4287 if (priv
->debug_level
& (IWL_DL_ISR
)) {
4288 inta
= iwl3945_read32(priv
, CSR_INT
);
4289 inta_mask
= iwl3945_read32(priv
, CSR_INT_MASK
);
4290 inta_fh
= iwl3945_read32(priv
, CSR_FH_INT_STATUS
);
4291 IWL_DEBUG_ISR("End inta 0x%08x, enabled 0x%08x, fh 0x%08x, "
4292 "flags 0x%08lx\n", inta
, inta_mask
, inta_fh
, flags
);
4295 spin_unlock_irqrestore(&priv
->lock
, flags
);
4298 static irqreturn_t
iwl3945_isr(int irq
, void *data
)
4300 struct iwl3945_priv
*priv
= data
;
4301 u32 inta
, inta_mask
;
4306 spin_lock(&priv
->lock
);
4308 /* Disable (but don't clear!) interrupts here to avoid
4309 * back-to-back ISRs and sporadic interrupts from our NIC.
4310 * If we have something to service, the tasklet will re-enable ints.
4311 * If we *don't* have something, we'll re-enable before leaving here. */
4312 inta_mask
= iwl3945_read32(priv
, CSR_INT_MASK
); /* just for debug */
4313 iwl3945_write32(priv
, CSR_INT_MASK
, 0x00000000);
4315 /* Discover which interrupts are active/pending */
4316 inta
= iwl3945_read32(priv
, CSR_INT
);
4317 inta_fh
= iwl3945_read32(priv
, CSR_FH_INT_STATUS
);
4319 /* Ignore interrupt if there's nothing in NIC to service.
4320 * This may be due to IRQ shared with another device,
4321 * or due to sporadic interrupts thrown from our NIC. */
4322 if (!inta
&& !inta_fh
) {
4323 IWL_DEBUG_ISR("Ignore interrupt, inta == 0, inta_fh == 0\n");
4327 if ((inta
== 0xFFFFFFFF) || ((inta
& 0xFFFFFFF0) == 0xa5a5a5a0)) {
4328 /* Hardware disappeared */
4329 IWL_WARNING("HARDWARE GONE?? INTA == 0x%08x\n", inta
);
4333 IWL_DEBUG_ISR("ISR inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
4334 inta
, inta_mask
, inta_fh
);
4336 inta
&= ~CSR_INT_BIT_SCD
;
4338 /* iwl3945_irq_tasklet() will service interrupts and re-enable them */
4339 if (likely(inta
|| inta_fh
))
4340 tasklet_schedule(&priv
->irq_tasklet
);
4342 spin_unlock(&priv
->lock
);
4347 /* re-enable interrupts here since we don't have anything to service. */
4348 /* only Re-enable if disabled by irq */
4349 if (test_bit(STATUS_INT_ENABLED
, &priv
->status
))
4350 iwl3945_enable_interrupts(priv
);
4351 spin_unlock(&priv
->lock
);
4355 /************************** EEPROM BANDS ****************************
4357 * The iwl3945_eeprom_band definitions below provide the mapping from the
4358 * EEPROM contents to the specific channel number supported for each
4361 * For example, iwl3945_priv->eeprom.band_3_channels[4] from the band_3
4362 * definition below maps to physical channel 42 in the 5.2GHz spectrum.
4363 * The specific geography and calibration information for that channel
4364 * is contained in the eeprom map itself.
4366 * During init, we copy the eeprom information and channel map
4367 * information into priv->channel_info_24/52 and priv->channel_map_24/52
4369 * channel_map_24/52 provides the index in the channel_info array for a
4370 * given channel. We have to have two separate maps as there is channel
4371 * overlap with the 2.4GHz and 5.2GHz spectrum as seen in band_1 and
4374 * A value of 0xff stored in the channel_map indicates that the channel
4375 * is not supported by the hardware at all.
4377 * A value of 0xfe in the channel_map indicates that the channel is not
4378 * valid for Tx with the current hardware. This means that
4379 * while the system can tune and receive on a given channel, it may not
4380 * be able to associate or transmit any frames on that
4381 * channel. There is no corresponding channel information for that
4384 *********************************************************************/
4387 static const u8 iwl3945_eeprom_band_1
[14] = {
4388 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14
4392 static const u8 iwl3945_eeprom_band_2
[] = { /* 4915-5080MHz */
4393 183, 184, 185, 187, 188, 189, 192, 196, 7, 8, 11, 12, 16
4396 static const u8 iwl3945_eeprom_band_3
[] = { /* 5170-5320MHz */
4397 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64
4400 static const u8 iwl3945_eeprom_band_4
[] = { /* 5500-5700MHz */
4401 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
4404 static const u8 iwl3945_eeprom_band_5
[] = { /* 5725-5825MHz */
4405 145, 149, 153, 157, 161, 165
4408 static void iwl3945_init_band_reference(const struct iwl3945_priv
*priv
, int band
,
4409 int *eeprom_ch_count
,
4410 const struct iwl_eeprom_channel
4412 const u8
**eeprom_ch_index
)
4415 case 1: /* 2.4GHz band */
4416 *eeprom_ch_count
= ARRAY_SIZE(iwl3945_eeprom_band_1
);
4417 *eeprom_ch_info
= priv
->eeprom
.band_1_channels
;
4418 *eeprom_ch_index
= iwl3945_eeprom_band_1
;
4420 case 2: /* 4.9GHz band */
4421 *eeprom_ch_count
= ARRAY_SIZE(iwl3945_eeprom_band_2
);
4422 *eeprom_ch_info
= priv
->eeprom
.band_2_channels
;
4423 *eeprom_ch_index
= iwl3945_eeprom_band_2
;
4425 case 3: /* 5.2GHz band */
4426 *eeprom_ch_count
= ARRAY_SIZE(iwl3945_eeprom_band_3
);
4427 *eeprom_ch_info
= priv
->eeprom
.band_3_channels
;
4428 *eeprom_ch_index
= iwl3945_eeprom_band_3
;
4430 case 4: /* 5.5GHz band */
4431 *eeprom_ch_count
= ARRAY_SIZE(iwl3945_eeprom_band_4
);
4432 *eeprom_ch_info
= priv
->eeprom
.band_4_channels
;
4433 *eeprom_ch_index
= iwl3945_eeprom_band_4
;
4435 case 5: /* 5.7GHz band */
4436 *eeprom_ch_count
= ARRAY_SIZE(iwl3945_eeprom_band_5
);
4437 *eeprom_ch_info
= priv
->eeprom
.band_5_channels
;
4438 *eeprom_ch_index
= iwl3945_eeprom_band_5
;
4447 * iwl3945_get_channel_info - Find driver's private channel info
4449 * Based on band and channel number.
4451 const struct iwl_channel_info
*
4452 iwl3945_get_channel_info(const struct iwl3945_priv
*priv
,
4453 enum ieee80211_band band
, u16 channel
)
4458 case IEEE80211_BAND_5GHZ
:
4459 for (i
= 14; i
< priv
->channel_count
; i
++) {
4460 if (priv
->channel_info
[i
].channel
== channel
)
4461 return &priv
->channel_info
[i
];
4465 case IEEE80211_BAND_2GHZ
:
4466 if (channel
>= 1 && channel
<= 14)
4467 return &priv
->channel_info
[channel
- 1];
4469 case IEEE80211_NUM_BANDS
:
4476 #define CHECK_AND_PRINT(x) ((eeprom_ch_info[ch].flags & EEPROM_CHANNEL_##x) \
4480 * iwl3945_init_channel_map - Set up driver's info for all possible channels
4482 static int iwl3945_init_channel_map(struct iwl3945_priv
*priv
)
4484 int eeprom_ch_count
= 0;
4485 const u8
*eeprom_ch_index
= NULL
;
4486 const struct iwl_eeprom_channel
*eeprom_ch_info
= NULL
;
4488 struct iwl_channel_info
*ch_info
;
4490 if (priv
->channel_count
) {
4491 IWL_DEBUG_INFO("Channel map already initialized.\n");
4495 if (priv
->eeprom
.version
< 0x2f) {
4496 IWL_WARNING("Unsupported EEPROM version: 0x%04X\n",
4497 priv
->eeprom
.version
);
4501 IWL_DEBUG_INFO("Initializing regulatory info from EEPROM\n");
4503 priv
->channel_count
=
4504 ARRAY_SIZE(iwl3945_eeprom_band_1
) +
4505 ARRAY_SIZE(iwl3945_eeprom_band_2
) +
4506 ARRAY_SIZE(iwl3945_eeprom_band_3
) +
4507 ARRAY_SIZE(iwl3945_eeprom_band_4
) +
4508 ARRAY_SIZE(iwl3945_eeprom_band_5
);
4510 IWL_DEBUG_INFO("Parsing data for %d channels.\n", priv
->channel_count
);
4512 priv
->channel_info
= kzalloc(sizeof(struct iwl_channel_info
) *
4513 priv
->channel_count
, GFP_KERNEL
);
4514 if (!priv
->channel_info
) {
4515 IWL_ERROR("Could not allocate channel_info\n");
4516 priv
->channel_count
= 0;
4520 ch_info
= priv
->channel_info
;
4522 /* Loop through the 5 EEPROM bands adding them in order to the
4523 * channel map we maintain (that contains additional information than
4524 * what just in the EEPROM) */
4525 for (band
= 1; band
<= 5; band
++) {
4527 iwl3945_init_band_reference(priv
, band
, &eeprom_ch_count
,
4528 &eeprom_ch_info
, &eeprom_ch_index
);
4530 /* Loop through each band adding each of the channels */
4531 for (ch
= 0; ch
< eeprom_ch_count
; ch
++) {
4532 ch_info
->channel
= eeprom_ch_index
[ch
];
4533 ch_info
->band
= (band
== 1) ? IEEE80211_BAND_2GHZ
:
4534 IEEE80211_BAND_5GHZ
;
4536 /* permanently store EEPROM's channel regulatory flags
4537 * and max power in channel info database. */
4538 ch_info
->eeprom
= eeprom_ch_info
[ch
];
4540 /* Copy the run-time flags so they are there even on
4541 * invalid channels */
4542 ch_info
->flags
= eeprom_ch_info
[ch
].flags
;
4544 if (!(is_channel_valid(ch_info
))) {
4545 IWL_DEBUG_INFO("Ch. %d Flags %x [%sGHz] - "
4549 is_channel_a_band(ch_info
) ?
4555 /* Initialize regulatory-based run-time data */
4556 ch_info
->max_power_avg
= ch_info
->curr_txpow
=
4557 eeprom_ch_info
[ch
].max_power_avg
;
4558 ch_info
->scan_power
= eeprom_ch_info
[ch
].max_power_avg
;
4559 ch_info
->min_power
= 0;
4561 IWL_DEBUG_INFO("Ch. %d [%sGHz] %s%s%s%s%s%s(0x%02x"
4562 " %ddBm): Ad-Hoc %ssupported\n",
4564 is_channel_a_band(ch_info
) ?
4566 CHECK_AND_PRINT(VALID
),
4567 CHECK_AND_PRINT(IBSS
),
4568 CHECK_AND_PRINT(ACTIVE
),
4569 CHECK_AND_PRINT(RADAR
),
4570 CHECK_AND_PRINT(WIDE
),
4571 CHECK_AND_PRINT(DFS
),
4572 eeprom_ch_info
[ch
].flags
,
4573 eeprom_ch_info
[ch
].max_power_avg
,
4574 ((eeprom_ch_info
[ch
].
4575 flags
& EEPROM_CHANNEL_IBSS
)
4576 && !(eeprom_ch_info
[ch
].
4577 flags
& EEPROM_CHANNEL_RADAR
))
4580 /* Set the user_txpower_limit to the highest power
4581 * supported by any channel */
4582 if (eeprom_ch_info
[ch
].max_power_avg
>
4583 priv
->user_txpower_limit
)
4584 priv
->user_txpower_limit
=
4585 eeprom_ch_info
[ch
].max_power_avg
;
4591 /* Set up txpower settings in driver for all channels */
4592 if (iwl3945_txpower_set_from_eeprom(priv
))
4599 * iwl3945_free_channel_map - undo allocations in iwl3945_init_channel_map
4601 static void iwl3945_free_channel_map(struct iwl3945_priv
*priv
)
4603 kfree(priv
->channel_info
);
4604 priv
->channel_count
= 0;
4607 /* For active scan, listen ACTIVE_DWELL_TIME (msec) on each channel after
4608 * sending probe req. This should be set long enough to hear probe responses
4609 * from more than one AP. */
4610 #define IWL_ACTIVE_DWELL_TIME_24 (30) /* all times in msec */
4611 #define IWL_ACTIVE_DWELL_TIME_52 (20)
4613 #define IWL_ACTIVE_DWELL_FACTOR_24GHZ (3)
4614 #define IWL_ACTIVE_DWELL_FACTOR_52GHZ (2)
4616 /* For faster active scanning, scan will move to the next channel if fewer than
4617 * PLCP_QUIET_THRESH packets are heard on this channel within
4618 * ACTIVE_QUIET_TIME after sending probe request. This shortens the dwell
4619 * time if it's a quiet channel (nothing responded to our probe, and there's
4620 * no other traffic).
4621 * Disable "quiet" feature by setting PLCP_QUIET_THRESH to 0. */
4622 #define IWL_PLCP_QUIET_THRESH __constant_cpu_to_le16(1) /* packets */
4623 #define IWL_ACTIVE_QUIET_TIME __constant_cpu_to_le16(10) /* msec */
4625 /* For passive scan, listen PASSIVE_DWELL_TIME (msec) on each channel.
4626 * Must be set longer than active dwell time.
4627 * For the most reliable scan, set > AP beacon interval (typically 100msec). */
4628 #define IWL_PASSIVE_DWELL_TIME_24 (20) /* all times in msec */
4629 #define IWL_PASSIVE_DWELL_TIME_52 (10)
4630 #define IWL_PASSIVE_DWELL_BASE (100)
4631 #define IWL_CHANNEL_TUNE_TIME 5
4633 #define IWL_SCAN_PROBE_MASK(n) (BIT(n) | (BIT(n) - BIT(1)))
4635 static inline u16
iwl3945_get_active_dwell_time(struct iwl3945_priv
*priv
,
4636 enum ieee80211_band band
,
4639 if (band
== IEEE80211_BAND_5GHZ
)
4640 return IWL_ACTIVE_DWELL_TIME_52
+
4641 IWL_ACTIVE_DWELL_FACTOR_52GHZ
* (n_probes
+ 1);
4643 return IWL_ACTIVE_DWELL_TIME_24
+
4644 IWL_ACTIVE_DWELL_FACTOR_24GHZ
* (n_probes
+ 1);
4647 static u16
iwl3945_get_passive_dwell_time(struct iwl3945_priv
*priv
,
4648 enum ieee80211_band band
)
4650 u16 passive
= (band
== IEEE80211_BAND_2GHZ
) ?
4651 IWL_PASSIVE_DWELL_BASE
+ IWL_PASSIVE_DWELL_TIME_24
:
4652 IWL_PASSIVE_DWELL_BASE
+ IWL_PASSIVE_DWELL_TIME_52
;
4654 if (iwl3945_is_associated(priv
)) {
4655 /* If we're associated, we clamp the maximum passive
4656 * dwell time to be 98% of the beacon interval (minus
4657 * 2 * channel tune time) */
4658 passive
= priv
->beacon_int
;
4659 if ((passive
> IWL_PASSIVE_DWELL_BASE
) || !passive
)
4660 passive
= IWL_PASSIVE_DWELL_BASE
;
4661 passive
= (passive
* 98) / 100 - IWL_CHANNEL_TUNE_TIME
* 2;
4667 static int iwl3945_get_channels_for_scan(struct iwl3945_priv
*priv
,
4668 enum ieee80211_band band
,
4669 u8 is_active
, u8 n_probes
,
4670 struct iwl3945_scan_channel
*scan_ch
)
4672 const struct ieee80211_channel
*channels
= NULL
;
4673 const struct ieee80211_supported_band
*sband
;
4674 const struct iwl_channel_info
*ch_info
;
4675 u16 passive_dwell
= 0;
4676 u16 active_dwell
= 0;
4679 sband
= iwl3945_get_band(priv
, band
);
4683 channels
= sband
->channels
;
4685 active_dwell
= iwl3945_get_active_dwell_time(priv
, band
, n_probes
);
4686 passive_dwell
= iwl3945_get_passive_dwell_time(priv
, band
);
4688 if (passive_dwell
<= active_dwell
)
4689 passive_dwell
= active_dwell
+ 1;
4691 for (i
= 0, added
= 0; i
< sband
->n_channels
; i
++) {
4692 if (channels
[i
].flags
& IEEE80211_CHAN_DISABLED
)
4695 scan_ch
->channel
= channels
[i
].hw_value
;
4697 ch_info
= iwl3945_get_channel_info(priv
, band
, scan_ch
->channel
);
4698 if (!is_channel_valid(ch_info
)) {
4699 IWL_DEBUG_SCAN("Channel %d is INVALID for this band.\n",
4704 scan_ch
->active_dwell
= cpu_to_le16(active_dwell
);
4705 scan_ch
->passive_dwell
= cpu_to_le16(passive_dwell
);
4706 /* If passive , set up for auto-switch
4707 * and use long active_dwell time.
4709 if (!is_active
|| is_channel_passive(ch_info
) ||
4710 (channels
[i
].flags
& IEEE80211_CHAN_PASSIVE_SCAN
)) {
4711 scan_ch
->type
= 0; /* passive */
4712 if (IWL_UCODE_API(priv
->ucode_ver
) == 1)
4713 scan_ch
->active_dwell
= cpu_to_le16(passive_dwell
- 1);
4715 scan_ch
->type
= 1; /* active */
4718 /* Set direct probe bits. These may be used both for active
4719 * scan channels (probes gets sent right away),
4720 * or for passive channels (probes get se sent only after
4721 * hearing clear Rx packet).*/
4722 if (IWL_UCODE_API(priv
->ucode_ver
) >= 2) {
4724 scan_ch
->type
|= IWL_SCAN_PROBE_MASK(n_probes
);
4726 /* uCode v1 does not allow setting direct probe bits on
4727 * passive channel. */
4728 if ((scan_ch
->type
& 1) && n_probes
)
4729 scan_ch
->type
|= IWL_SCAN_PROBE_MASK(n_probes
);
4732 /* Set txpower levels to defaults */
4733 scan_ch
->tpc
.dsp_atten
= 110;
4734 /* scan_pwr_info->tpc.dsp_atten; */
4736 /*scan_pwr_info->tpc.tx_gain; */
4737 if (band
== IEEE80211_BAND_5GHZ
)
4738 scan_ch
->tpc
.tx_gain
= ((1 << 5) | (3 << 3)) | 3;
4740 scan_ch
->tpc
.tx_gain
= ((1 << 5) | (5 << 3));
4741 /* NOTE: if we were doing 6Mb OFDM for scans we'd use
4743 * scan_ch->tpc.tx_gain = ((1 << 5) | (2 << 3)) | 3;
4747 IWL_DEBUG_SCAN("Scanning %d [%s %d]\n",
4749 (scan_ch
->type
& 1) ? "ACTIVE" : "PASSIVE",
4750 (scan_ch
->type
& 1) ?
4751 active_dwell
: passive_dwell
);
4757 IWL_DEBUG_SCAN("total channels to scan %d \n", added
);
4761 static void iwl3945_init_hw_rates(struct iwl3945_priv
*priv
,
4762 struct ieee80211_rate
*rates
)
4766 for (i
= 0; i
< IWL_RATE_COUNT
; i
++) {
4767 rates
[i
].bitrate
= iwl3945_rates
[i
].ieee
* 5;
4768 rates
[i
].hw_value
= i
; /* Rate scaling will work on indexes */
4769 rates
[i
].hw_value_short
= i
;
4771 if ((i
> IWL39_LAST_OFDM_RATE
) || (i
< IWL_FIRST_OFDM_RATE
)) {
4773 * If CCK != 1M then set short preamble rate flag.
4775 rates
[i
].flags
|= (iwl3945_rates
[i
].plcp
== 10) ?
4776 0 : IEEE80211_RATE_SHORT_PREAMBLE
;
4782 * iwl3945_init_geos - Initialize mac80211's geo/channel info based from eeprom
4784 static int iwl3945_init_geos(struct iwl3945_priv
*priv
)
4786 struct iwl_channel_info
*ch
;
4787 struct ieee80211_supported_band
*sband
;
4788 struct ieee80211_channel
*channels
;
4789 struct ieee80211_channel
*geo_ch
;
4790 struct ieee80211_rate
*rates
;
4793 if (priv
->bands
[IEEE80211_BAND_2GHZ
].n_bitrates
||
4794 priv
->bands
[IEEE80211_BAND_5GHZ
].n_bitrates
) {
4795 IWL_DEBUG_INFO("Geography modes already initialized.\n");
4796 set_bit(STATUS_GEO_CONFIGURED
, &priv
->status
);
4800 channels
= kzalloc(sizeof(struct ieee80211_channel
) *
4801 priv
->channel_count
, GFP_KERNEL
);
4805 rates
= kzalloc((sizeof(struct ieee80211_rate
) * (IWL_RATE_COUNT
+ 1)),
4812 /* 5.2GHz channels start after the 2.4GHz channels */
4813 sband
= &priv
->bands
[IEEE80211_BAND_5GHZ
];
4814 sband
->channels
= &channels
[ARRAY_SIZE(iwl3945_eeprom_band_1
)];
4816 sband
->bitrates
= &rates
[IWL_FIRST_OFDM_RATE
];
4817 sband
->n_bitrates
= IWL_RATE_COUNT
- IWL_FIRST_OFDM_RATE
;
4819 sband
= &priv
->bands
[IEEE80211_BAND_2GHZ
];
4820 sband
->channels
= channels
;
4822 sband
->bitrates
= rates
;
4823 sband
->n_bitrates
= IWL_RATE_COUNT
;
4825 priv
->ieee_channels
= channels
;
4826 priv
->ieee_rates
= rates
;
4828 iwl3945_init_hw_rates(priv
, rates
);
4830 for (i
= 0; i
< priv
->channel_count
; i
++) {
4831 ch
= &priv
->channel_info
[i
];
4833 /* FIXME: might be removed if scan is OK*/
4834 if (!is_channel_valid(ch
))
4837 if (is_channel_a_band(ch
))
4838 sband
= &priv
->bands
[IEEE80211_BAND_5GHZ
];
4840 sband
= &priv
->bands
[IEEE80211_BAND_2GHZ
];
4842 geo_ch
= &sband
->channels
[sband
->n_channels
++];
4844 geo_ch
->center_freq
= ieee80211_channel_to_frequency(ch
->channel
);
4845 geo_ch
->max_power
= ch
->max_power_avg
;
4846 geo_ch
->max_antenna_gain
= 0xff;
4847 geo_ch
->hw_value
= ch
->channel
;
4849 if (is_channel_valid(ch
)) {
4850 if (!(ch
->flags
& EEPROM_CHANNEL_IBSS
))
4851 geo_ch
->flags
|= IEEE80211_CHAN_NO_IBSS
;
4853 if (!(ch
->flags
& EEPROM_CHANNEL_ACTIVE
))
4854 geo_ch
->flags
|= IEEE80211_CHAN_PASSIVE_SCAN
;
4856 if (ch
->flags
& EEPROM_CHANNEL_RADAR
)
4857 geo_ch
->flags
|= IEEE80211_CHAN_RADAR
;
4859 if (ch
->max_power_avg
> priv
->max_channel_txpower_limit
)
4860 priv
->max_channel_txpower_limit
=
4863 geo_ch
->flags
|= IEEE80211_CHAN_DISABLED
;
4866 /* Save flags for reg domain usage */
4867 geo_ch
->orig_flags
= geo_ch
->flags
;
4869 IWL_DEBUG_INFO("Channel %d Freq=%d[%sGHz] %s flag=0%X\n",
4870 ch
->channel
, geo_ch
->center_freq
,
4871 is_channel_a_band(ch
) ? "5.2" : "2.4",
4872 geo_ch
->flags
& IEEE80211_CHAN_DISABLED
?
4873 "restricted" : "valid",
4877 if ((priv
->bands
[IEEE80211_BAND_5GHZ
].n_channels
== 0) &&
4878 priv
->cfg
->sku
& IWL_SKU_A
) {
4879 printk(KERN_INFO DRV_NAME
4880 ": Incorrectly detected BG card as ABG. Please send "
4881 "your PCI ID 0x%04X:0x%04X to maintainer.\n",
4882 priv
->pci_dev
->device
, priv
->pci_dev
->subsystem_device
);
4883 priv
->cfg
->sku
&= ~IWL_SKU_A
;
4886 printk(KERN_INFO DRV_NAME
4887 ": Tunable channels: %d 802.11bg, %d 802.11a channels\n",
4888 priv
->bands
[IEEE80211_BAND_2GHZ
].n_channels
,
4889 priv
->bands
[IEEE80211_BAND_5GHZ
].n_channels
);
4891 if (priv
->bands
[IEEE80211_BAND_2GHZ
].n_channels
)
4892 priv
->hw
->wiphy
->bands
[IEEE80211_BAND_2GHZ
] =
4893 &priv
->bands
[IEEE80211_BAND_2GHZ
];
4894 if (priv
->bands
[IEEE80211_BAND_5GHZ
].n_channels
)
4895 priv
->hw
->wiphy
->bands
[IEEE80211_BAND_5GHZ
] =
4896 &priv
->bands
[IEEE80211_BAND_5GHZ
];
4898 set_bit(STATUS_GEO_CONFIGURED
, &priv
->status
);
4904 * iwl3945_free_geos - undo allocations in iwl3945_init_geos
4906 static void iwl3945_free_geos(struct iwl3945_priv
*priv
)
4908 kfree(priv
->ieee_channels
);
4909 kfree(priv
->ieee_rates
);
4910 clear_bit(STATUS_GEO_CONFIGURED
, &priv
->status
);
4913 /******************************************************************************
4915 * uCode download functions
4917 ******************************************************************************/
4919 static void iwl3945_dealloc_ucode_pci(struct iwl3945_priv
*priv
)
4921 iwl_free_fw_desc(priv
->pci_dev
, &priv
->ucode_code
);
4922 iwl_free_fw_desc(priv
->pci_dev
, &priv
->ucode_data
);
4923 iwl_free_fw_desc(priv
->pci_dev
, &priv
->ucode_data_backup
);
4924 iwl_free_fw_desc(priv
->pci_dev
, &priv
->ucode_init
);
4925 iwl_free_fw_desc(priv
->pci_dev
, &priv
->ucode_init_data
);
4926 iwl_free_fw_desc(priv
->pci_dev
, &priv
->ucode_boot
);
4930 * iwl3945_verify_inst_full - verify runtime uCode image in card vs. host,
4931 * looking at all data.
4933 static int iwl3945_verify_inst_full(struct iwl3945_priv
*priv
, __le32
*image
, u32 len
)
4940 IWL_DEBUG_INFO("ucode inst image size is %u\n", len
);
4942 rc
= iwl3945_grab_nic_access(priv
);
4946 iwl3945_write_direct32(priv
, HBUS_TARG_MEM_RADDR
,
4947 IWL39_RTC_INST_LOWER_BOUND
);
4950 for (; len
> 0; len
-= sizeof(u32
), image
++) {
4951 /* read data comes through single port, auto-incr addr */
4952 /* NOTE: Use the debugless read so we don't flood kernel log
4953 * if IWL_DL_IO is set */
4954 val
= _iwl3945_read_direct32(priv
, HBUS_TARG_MEM_RDAT
);
4955 if (val
!= le32_to_cpu(*image
)) {
4956 IWL_ERROR("uCode INST section is invalid at "
4957 "offset 0x%x, is 0x%x, s/b 0x%x\n",
4958 save_len
- len
, val
, le32_to_cpu(*image
));
4966 iwl3945_release_nic_access(priv
);
4969 IWL_DEBUG_INFO("ucode image in INSTRUCTION memory is good\n");
4976 * iwl3945_verify_inst_sparse - verify runtime uCode image in card vs. host,
4977 * using sample data 100 bytes apart. If these sample points are good,
4978 * it's a pretty good bet that everything between them is good, too.
4980 static int iwl3945_verify_inst_sparse(struct iwl3945_priv
*priv
, __le32
*image
, u32 len
)
4987 IWL_DEBUG_INFO("ucode inst image size is %u\n", len
);
4989 rc
= iwl3945_grab_nic_access(priv
);
4993 for (i
= 0; i
< len
; i
+= 100, image
+= 100/sizeof(u32
)) {
4994 /* read data comes through single port, auto-incr addr */
4995 /* NOTE: Use the debugless read so we don't flood kernel log
4996 * if IWL_DL_IO is set */
4997 iwl3945_write_direct32(priv
, HBUS_TARG_MEM_RADDR
,
4998 i
+ IWL39_RTC_INST_LOWER_BOUND
);
4999 val
= _iwl3945_read_direct32(priv
, HBUS_TARG_MEM_RDAT
);
5000 if (val
!= le32_to_cpu(*image
)) {
5001 #if 0 /* Enable this if you want to see details */
5002 IWL_ERROR("uCode INST section is invalid at "
5003 "offset 0x%x, is 0x%x, s/b 0x%x\n",
5013 iwl3945_release_nic_access(priv
);
5020 * iwl3945_verify_ucode - determine which instruction image is in SRAM,
5021 * and verify its contents
5023 static int iwl3945_verify_ucode(struct iwl3945_priv
*priv
)
5030 image
= (__le32
*)priv
->ucode_boot
.v_addr
;
5031 len
= priv
->ucode_boot
.len
;
5032 rc
= iwl3945_verify_inst_sparse(priv
, image
, len
);
5034 IWL_DEBUG_INFO("Bootstrap uCode is good in inst SRAM\n");
5038 /* Try initialize */
5039 image
= (__le32
*)priv
->ucode_init
.v_addr
;
5040 len
= priv
->ucode_init
.len
;
5041 rc
= iwl3945_verify_inst_sparse(priv
, image
, len
);
5043 IWL_DEBUG_INFO("Initialize uCode is good in inst SRAM\n");
5047 /* Try runtime/protocol */
5048 image
= (__le32
*)priv
->ucode_code
.v_addr
;
5049 len
= priv
->ucode_code
.len
;
5050 rc
= iwl3945_verify_inst_sparse(priv
, image
, len
);
5052 IWL_DEBUG_INFO("Runtime uCode is good in inst SRAM\n");
5056 IWL_ERROR("NO VALID UCODE IMAGE IN INSTRUCTION SRAM!!\n");
5058 /* Since nothing seems to match, show first several data entries in
5059 * instruction SRAM, so maybe visual inspection will give a clue.
5060 * Selection of bootstrap image (vs. other images) is arbitrary. */
5061 image
= (__le32
*)priv
->ucode_boot
.v_addr
;
5062 len
= priv
->ucode_boot
.len
;
5063 rc
= iwl3945_verify_inst_full(priv
, image
, len
);
5069 /* check contents of special bootstrap uCode SRAM */
5070 static int iwl3945_verify_bsm(struct iwl3945_priv
*priv
)
5072 __le32
*image
= priv
->ucode_boot
.v_addr
;
5073 u32 len
= priv
->ucode_boot
.len
;
5077 IWL_DEBUG_INFO("Begin verify bsm\n");
5079 /* verify BSM SRAM contents */
5080 val
= iwl3945_read_prph(priv
, BSM_WR_DWCOUNT_REG
);
5081 for (reg
= BSM_SRAM_LOWER_BOUND
;
5082 reg
< BSM_SRAM_LOWER_BOUND
+ len
;
5083 reg
+= sizeof(u32
), image
++) {
5084 val
= iwl3945_read_prph(priv
, reg
);
5085 if (val
!= le32_to_cpu(*image
)) {
5086 IWL_ERROR("BSM uCode verification failed at "
5087 "addr 0x%08X+%u (of %u), is 0x%x, s/b 0x%x\n",
5088 BSM_SRAM_LOWER_BOUND
,
5089 reg
- BSM_SRAM_LOWER_BOUND
, len
,
5090 val
, le32_to_cpu(*image
));
5095 IWL_DEBUG_INFO("BSM bootstrap uCode image OK\n");
5101 * iwl3945_load_bsm - Load bootstrap instructions
5105 * The Bootstrap State Machine (BSM) stores a short bootstrap uCode program
5106 * in special SRAM that does not power down during RFKILL. When powering back
5107 * up after power-saving sleeps (or during initial uCode load), the BSM loads
5108 * the bootstrap program into the on-board processor, and starts it.
5110 * The bootstrap program loads (via DMA) instructions and data for a new
5111 * program from host DRAM locations indicated by the host driver in the
5112 * BSM_DRAM_* registers. Once the new program is loaded, it starts
5115 * When initializing the NIC, the host driver points the BSM to the
5116 * "initialize" uCode image. This uCode sets up some internal data, then
5117 * notifies host via "initialize alive" that it is complete.
5119 * The host then replaces the BSM_DRAM_* pointer values to point to the
5120 * normal runtime uCode instructions and a backup uCode data cache buffer
5121 * (filled initially with starting data values for the on-board processor),
5122 * then triggers the "initialize" uCode to load and launch the runtime uCode,
5123 * which begins normal operation.
5125 * When doing a power-save shutdown, runtime uCode saves data SRAM into
5126 * the backup data cache in DRAM before SRAM is powered down.
5128 * When powering back up, the BSM loads the bootstrap program. This reloads
5129 * the runtime uCode instructions and the backup data cache into SRAM,
5130 * and re-launches the runtime uCode from where it left off.
5132 static int iwl3945_load_bsm(struct iwl3945_priv
*priv
)
5134 __le32
*image
= priv
->ucode_boot
.v_addr
;
5135 u32 len
= priv
->ucode_boot
.len
;
5145 IWL_DEBUG_INFO("Begin load bsm\n");
5147 /* make sure bootstrap program is no larger than BSM's SRAM size */
5148 if (len
> IWL39_MAX_BSM_SIZE
)
5151 /* Tell bootstrap uCode where to find the "Initialize" uCode
5152 * in host DRAM ... host DRAM physical address bits 31:0 for 3945.
5153 * NOTE: iwl3945_initialize_alive_start() will replace these values,
5154 * after the "initialize" uCode has run, to point to
5155 * runtime/protocol instructions and backup data cache. */
5156 pinst
= priv
->ucode_init
.p_addr
;
5157 pdata
= priv
->ucode_init_data
.p_addr
;
5158 inst_len
= priv
->ucode_init
.len
;
5159 data_len
= priv
->ucode_init_data
.len
;
5161 rc
= iwl3945_grab_nic_access(priv
);
5165 iwl3945_write_prph(priv
, BSM_DRAM_INST_PTR_REG
, pinst
);
5166 iwl3945_write_prph(priv
, BSM_DRAM_DATA_PTR_REG
, pdata
);
5167 iwl3945_write_prph(priv
, BSM_DRAM_INST_BYTECOUNT_REG
, inst_len
);
5168 iwl3945_write_prph(priv
, BSM_DRAM_DATA_BYTECOUNT_REG
, data_len
);
5170 /* Fill BSM memory with bootstrap instructions */
5171 for (reg_offset
= BSM_SRAM_LOWER_BOUND
;
5172 reg_offset
< BSM_SRAM_LOWER_BOUND
+ len
;
5173 reg_offset
+= sizeof(u32
), image
++)
5174 _iwl3945_write_prph(priv
, reg_offset
,
5175 le32_to_cpu(*image
));
5177 rc
= iwl3945_verify_bsm(priv
);
5179 iwl3945_release_nic_access(priv
);
5183 /* Tell BSM to copy from BSM SRAM into instruction SRAM, when asked */
5184 iwl3945_write_prph(priv
, BSM_WR_MEM_SRC_REG
, 0x0);
5185 iwl3945_write_prph(priv
, BSM_WR_MEM_DST_REG
,
5186 IWL39_RTC_INST_LOWER_BOUND
);
5187 iwl3945_write_prph(priv
, BSM_WR_DWCOUNT_REG
, len
/ sizeof(u32
));
5189 /* Load bootstrap code into instruction SRAM now,
5190 * to prepare to load "initialize" uCode */
5191 iwl3945_write_prph(priv
, BSM_WR_CTRL_REG
,
5192 BSM_WR_CTRL_REG_BIT_START
);
5194 /* Wait for load of bootstrap uCode to finish */
5195 for (i
= 0; i
< 100; i
++) {
5196 done
= iwl3945_read_prph(priv
, BSM_WR_CTRL_REG
);
5197 if (!(done
& BSM_WR_CTRL_REG_BIT_START
))
5202 IWL_DEBUG_INFO("BSM write complete, poll %d iterations\n", i
);
5204 IWL_ERROR("BSM write did not complete!\n");
5208 /* Enable future boot loads whenever power management unit triggers it
5209 * (e.g. when powering back up after power-save shutdown) */
5210 iwl3945_write_prph(priv
, BSM_WR_CTRL_REG
,
5211 BSM_WR_CTRL_REG_BIT_START_EN
);
5213 iwl3945_release_nic_access(priv
);
5218 static void iwl3945_nic_start(struct iwl3945_priv
*priv
)
5220 /* Remove all resets to allow NIC to operate */
5221 iwl3945_write32(priv
, CSR_RESET
, 0);
5225 * iwl3945_read_ucode - Read uCode images from disk file.
5227 * Copy into buffers for card to fetch via bus-mastering
5229 static int iwl3945_read_ucode(struct iwl3945_priv
*priv
)
5231 struct iwl3945_ucode
*ucode
;
5232 int ret
= -EINVAL
, index
;
5233 const struct firmware
*ucode_raw
;
5234 /* firmware file name contains uCode/driver compatibility version */
5235 const char *name_pre
= priv
->cfg
->fw_name_pre
;
5236 const unsigned int api_max
= priv
->cfg
->ucode_api_max
;
5237 const unsigned int api_min
= priv
->cfg
->ucode_api_min
;
5241 u32 api_ver
, inst_size
, data_size
, init_size
, init_data_size
, boot_size
;
5243 /* Ask kernel firmware_class module to get the boot firmware off disk.
5244 * request_firmware() is synchronous, file is in memory on return. */
5245 for (index
= api_max
; index
>= api_min
; index
--) {
5246 sprintf(buf
, "%s%u%s", name_pre
, index
, ".ucode");
5247 ret
= request_firmware(&ucode_raw
, buf
, &priv
->pci_dev
->dev
);
5249 IWL_ERROR("%s firmware file req failed: Reason %d\n",
5256 if (index
< api_max
)
5257 IWL_ERROR("Loaded firmware %s, which is deprecated. Please use API v%u instead.\n",
5259 IWL_DEBUG_INFO("Got firmware '%s' file (%zd bytes) from disk\n",
5260 buf
, ucode_raw
->size
);
5268 /* Make sure that we got at least our header! */
5269 if (ucode_raw
->size
< sizeof(*ucode
)) {
5270 IWL_ERROR("File size way too small!\n");
5275 /* Data from ucode file: header followed by uCode images */
5276 ucode
= (void *)ucode_raw
->data
;
5278 priv
->ucode_ver
= le32_to_cpu(ucode
->ver
);
5279 api_ver
= IWL_UCODE_API(priv
->ucode_ver
);
5280 inst_size
= le32_to_cpu(ucode
->inst_size
);
5281 data_size
= le32_to_cpu(ucode
->data_size
);
5282 init_size
= le32_to_cpu(ucode
->init_size
);
5283 init_data_size
= le32_to_cpu(ucode
->init_data_size
);
5284 boot_size
= le32_to_cpu(ucode
->boot_size
);
5286 /* api_ver should match the api version forming part of the
5287 * firmware filename ... but we don't check for that and only rely
5288 * on the API version read from firware header from here on forward */
5290 if (api_ver
< api_min
|| api_ver
> api_max
) {
5291 IWL_ERROR("Driver unable to support your firmware API. "
5292 "Driver supports v%u, firmware is v%u.\n",
5294 priv
->ucode_ver
= 0;
5298 if (api_ver
!= api_max
)
5299 IWL_ERROR("Firmware has old API version. Expected %u, "
5300 "got %u. New firmware can be obtained "
5301 "from http://www.intellinuxwireless.org.\n",
5304 printk(KERN_INFO DRV_NAME
" loaded firmware version %u.%u.%u.%u\n",
5305 IWL_UCODE_MAJOR(priv
->ucode_ver
),
5306 IWL_UCODE_MINOR(priv
->ucode_ver
),
5307 IWL_UCODE_API(priv
->ucode_ver
),
5308 IWL_UCODE_SERIAL(priv
->ucode_ver
));
5309 IWL_DEBUG_INFO("f/w package hdr ucode version raw = 0x%x\n",
5311 IWL_DEBUG_INFO("f/w package hdr runtime inst size = %u\n", inst_size
);
5312 IWL_DEBUG_INFO("f/w package hdr runtime data size = %u\n", data_size
);
5313 IWL_DEBUG_INFO("f/w package hdr init inst size = %u\n", init_size
);
5314 IWL_DEBUG_INFO("f/w package hdr init data size = %u\n", init_data_size
);
5315 IWL_DEBUG_INFO("f/w package hdr boot inst size = %u\n", boot_size
);
5318 /* Verify size of file vs. image size info in file's header */
5319 if (ucode_raw
->size
< sizeof(*ucode
) +
5320 inst_size
+ data_size
+ init_size
+
5321 init_data_size
+ boot_size
) {
5323 IWL_DEBUG_INFO("uCode file size %d too small\n",
5324 (int)ucode_raw
->size
);
5329 /* Verify that uCode images will fit in card's SRAM */
5330 if (inst_size
> IWL39_MAX_INST_SIZE
) {
5331 IWL_DEBUG_INFO("uCode instr len %d too large to fit in\n",
5337 if (data_size
> IWL39_MAX_DATA_SIZE
) {
5338 IWL_DEBUG_INFO("uCode data len %d too large to fit in\n",
5343 if (init_size
> IWL39_MAX_INST_SIZE
) {
5344 IWL_DEBUG_INFO("uCode init instr len %d too large to fit in\n",
5349 if (init_data_size
> IWL39_MAX_DATA_SIZE
) {
5350 IWL_DEBUG_INFO("uCode init data len %d too large to fit in\n",
5355 if (boot_size
> IWL39_MAX_BSM_SIZE
) {
5356 IWL_DEBUG_INFO("uCode boot instr len %d too large to fit in\n",
5362 /* Allocate ucode buffers for card's bus-master loading ... */
5364 /* Runtime instructions and 2 copies of data:
5365 * 1) unmodified from disk
5366 * 2) backup cache for save/restore during power-downs */
5367 priv
->ucode_code
.len
= inst_size
;
5368 iwl_alloc_fw_desc(priv
->pci_dev
, &priv
->ucode_code
);
5370 priv
->ucode_data
.len
= data_size
;
5371 iwl_alloc_fw_desc(priv
->pci_dev
, &priv
->ucode_data
);
5373 priv
->ucode_data_backup
.len
= data_size
;
5374 iwl_alloc_fw_desc(priv
->pci_dev
, &priv
->ucode_data_backup
);
5376 if (!priv
->ucode_code
.v_addr
|| !priv
->ucode_data
.v_addr
||
5377 !priv
->ucode_data_backup
.v_addr
)
5380 /* Initialization instructions and data */
5381 if (init_size
&& init_data_size
) {
5382 priv
->ucode_init
.len
= init_size
;
5383 iwl_alloc_fw_desc(priv
->pci_dev
, &priv
->ucode_init
);
5385 priv
->ucode_init_data
.len
= init_data_size
;
5386 iwl_alloc_fw_desc(priv
->pci_dev
, &priv
->ucode_init_data
);
5388 if (!priv
->ucode_init
.v_addr
|| !priv
->ucode_init_data
.v_addr
)
5392 /* Bootstrap (instructions only, no data) */
5394 priv
->ucode_boot
.len
= boot_size
;
5395 iwl_alloc_fw_desc(priv
->pci_dev
, &priv
->ucode_boot
);
5397 if (!priv
->ucode_boot
.v_addr
)
5401 /* Copy images into buffers for card's bus-master reads ... */
5403 /* Runtime instructions (first block of data in file) */
5404 src
= &ucode
->data
[0];
5405 len
= priv
->ucode_code
.len
;
5406 IWL_DEBUG_INFO("Copying (but not loading) uCode instr len %Zd\n", len
);
5407 memcpy(priv
->ucode_code
.v_addr
, src
, len
);
5408 IWL_DEBUG_INFO("uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n",
5409 priv
->ucode_code
.v_addr
, (u32
)priv
->ucode_code
.p_addr
);
5411 /* Runtime data (2nd block)
5412 * NOTE: Copy into backup buffer will be done in iwl3945_up() */
5413 src
= &ucode
->data
[inst_size
];
5414 len
= priv
->ucode_data
.len
;
5415 IWL_DEBUG_INFO("Copying (but not loading) uCode data len %Zd\n", len
);
5416 memcpy(priv
->ucode_data
.v_addr
, src
, len
);
5417 memcpy(priv
->ucode_data_backup
.v_addr
, src
, len
);
5419 /* Initialization instructions (3rd block) */
5421 src
= &ucode
->data
[inst_size
+ data_size
];
5422 len
= priv
->ucode_init
.len
;
5423 IWL_DEBUG_INFO("Copying (but not loading) init instr len %Zd\n",
5425 memcpy(priv
->ucode_init
.v_addr
, src
, len
);
5428 /* Initialization data (4th block) */
5429 if (init_data_size
) {
5430 src
= &ucode
->data
[inst_size
+ data_size
+ init_size
];
5431 len
= priv
->ucode_init_data
.len
;
5432 IWL_DEBUG_INFO("Copying (but not loading) init data len %d\n",
5434 memcpy(priv
->ucode_init_data
.v_addr
, src
, len
);
5437 /* Bootstrap instructions (5th block) */
5438 src
= &ucode
->data
[inst_size
+ data_size
+ init_size
+ init_data_size
];
5439 len
= priv
->ucode_boot
.len
;
5440 IWL_DEBUG_INFO("Copying (but not loading) boot instr len %d\n",
5442 memcpy(priv
->ucode_boot
.v_addr
, src
, len
);
5444 /* We have our copies now, allow OS release its copies */
5445 release_firmware(ucode_raw
);
5449 IWL_ERROR("failed to allocate pci memory\n");
5451 iwl3945_dealloc_ucode_pci(priv
);
5454 release_firmware(ucode_raw
);
5462 * iwl3945_set_ucode_ptrs - Set uCode address location
5464 * Tell initialization uCode where to find runtime uCode.
5466 * BSM registers initially contain pointers to initialization uCode.
5467 * We need to replace them to load runtime uCode inst and data,
5468 * and to save runtime data when powering down.
5470 static int iwl3945_set_ucode_ptrs(struct iwl3945_priv
*priv
)
5475 unsigned long flags
;
5477 /* bits 31:0 for 3945 */
5478 pinst
= priv
->ucode_code
.p_addr
;
5479 pdata
= priv
->ucode_data_backup
.p_addr
;
5481 spin_lock_irqsave(&priv
->lock
, flags
);
5482 rc
= iwl3945_grab_nic_access(priv
);
5484 spin_unlock_irqrestore(&priv
->lock
, flags
);
5488 /* Tell bootstrap uCode where to find image to load */
5489 iwl3945_write_prph(priv
, BSM_DRAM_INST_PTR_REG
, pinst
);
5490 iwl3945_write_prph(priv
, BSM_DRAM_DATA_PTR_REG
, pdata
);
5491 iwl3945_write_prph(priv
, BSM_DRAM_DATA_BYTECOUNT_REG
,
5492 priv
->ucode_data
.len
);
5494 /* Inst byte count must be last to set up, bit 31 signals uCode
5495 * that all new ptr/size info is in place */
5496 iwl3945_write_prph(priv
, BSM_DRAM_INST_BYTECOUNT_REG
,
5497 priv
->ucode_code
.len
| BSM_DRAM_INST_LOAD
);
5499 iwl3945_release_nic_access(priv
);
5501 spin_unlock_irqrestore(&priv
->lock
, flags
);
5503 IWL_DEBUG_INFO("Runtime uCode pointers are set.\n");
5509 * iwl3945_init_alive_start - Called after REPLY_ALIVE notification received
5511 * Called after REPLY_ALIVE notification received from "initialize" uCode.
5513 * Tell "initialize" uCode to go ahead and load the runtime uCode.
5515 static void iwl3945_init_alive_start(struct iwl3945_priv
*priv
)
5517 /* Check alive response for "valid" sign from uCode */
5518 if (priv
->card_alive_init
.is_valid
!= UCODE_VALID_OK
) {
5519 /* We had an error bringing up the hardware, so take it
5520 * all the way back down so we can try again */
5521 IWL_DEBUG_INFO("Initialize Alive failed.\n");
5525 /* Bootstrap uCode has loaded initialize uCode ... verify inst image.
5526 * This is a paranoid check, because we would not have gotten the
5527 * "initialize" alive if code weren't properly loaded. */
5528 if (iwl3945_verify_ucode(priv
)) {
5529 /* Runtime instruction load was bad;
5530 * take it all the way back down so we can try again */
5531 IWL_DEBUG_INFO("Bad \"initialize\" uCode load.\n");
5535 /* Send pointers to protocol/runtime uCode image ... init code will
5536 * load and launch runtime uCode, which will send us another "Alive"
5538 IWL_DEBUG_INFO("Initialization Alive received.\n");
5539 if (iwl3945_set_ucode_ptrs(priv
)) {
5540 /* Runtime instruction load won't happen;
5541 * take it all the way back down so we can try again */
5542 IWL_DEBUG_INFO("Couldn't set up uCode pointers.\n");
5548 queue_work(priv
->workqueue
, &priv
->restart
);
5553 static int iwl3945_mac_beacon_update(struct ieee80211_hw
*hw
,
5554 struct sk_buff
*skb
);
5557 * iwl3945_alive_start - called after REPLY_ALIVE notification received
5558 * from protocol/runtime uCode (initialization uCode's
5559 * Alive gets handled by iwl3945_init_alive_start()).
5561 static void iwl3945_alive_start(struct iwl3945_priv
*priv
)
5564 int thermal_spin
= 0;
5567 IWL_DEBUG_INFO("Runtime Alive received.\n");
5569 if (priv
->card_alive
.is_valid
!= UCODE_VALID_OK
) {
5570 /* We had an error bringing up the hardware, so take it
5571 * all the way back down so we can try again */
5572 IWL_DEBUG_INFO("Alive failed.\n");
5576 /* Initialize uCode has loaded Runtime uCode ... verify inst image.
5577 * This is a paranoid check, because we would not have gotten the
5578 * "runtime" alive if code weren't properly loaded. */
5579 if (iwl3945_verify_ucode(priv
)) {
5580 /* Runtime instruction load was bad;
5581 * take it all the way back down so we can try again */
5582 IWL_DEBUG_INFO("Bad runtime uCode load.\n");
5586 iwl3945_clear_stations_table(priv
);
5588 rc
= iwl3945_grab_nic_access(priv
);
5590 IWL_WARNING("Can not read RFKILL status from adapter\n");
5594 rfkill
= iwl3945_read_prph(priv
, APMG_RFKILL_REG
);
5595 IWL_DEBUG_INFO("RFKILL status: 0x%x\n", rfkill
);
5596 iwl3945_release_nic_access(priv
);
5599 clear_bit(STATUS_RF_KILL_HW
, &priv
->status
);
5600 /* if RFKILL is not on, then wait for thermal
5601 * sensor in adapter to kick in */
5602 while (iwl3945_hw_get_temperature(priv
) == 0) {
5608 IWL_DEBUG_INFO("Thermal calibration took %dus\n",
5611 set_bit(STATUS_RF_KILL_HW
, &priv
->status
);
5613 /* After the ALIVE response, we can send commands to 3945 uCode */
5614 set_bit(STATUS_ALIVE
, &priv
->status
);
5616 /* Clear out the uCode error bit if it is set */
5617 clear_bit(STATUS_FW_ERROR
, &priv
->status
);
5619 if (iwl3945_is_rfkill(priv
))
5622 ieee80211_wake_queues(priv
->hw
);
5624 priv
->active_rate
= priv
->rates_mask
;
5625 priv
->active_rate_basic
= priv
->rates_mask
& IWL_BASIC_RATES_MASK
;
5627 iwl3945_send_power_mode(priv
, IWL_POWER_LEVEL(priv
->power_mode
));
5629 if (iwl3945_is_associated(priv
)) {
5630 struct iwl3945_rxon_cmd
*active_rxon
=
5631 (struct iwl3945_rxon_cmd
*)(&priv
->active_rxon
);
5633 memcpy(&priv
->staging_rxon
, &priv
->active_rxon
,
5634 sizeof(priv
->staging_rxon
));
5635 active_rxon
->filter_flags
&= ~RXON_FILTER_ASSOC_MSK
;
5637 /* Initialize our rx_config data */
5638 iwl3945_connection_init_rx_config(priv
, priv
->iw_mode
);
5639 memcpy(priv
->staging_rxon
.node_addr
, priv
->mac_addr
, ETH_ALEN
);
5642 /* Configure Bluetooth device coexistence support */
5643 iwl3945_send_bt_config(priv
);
5645 /* Configure the adapter for unassociated operation */
5646 iwl3945_commit_rxon(priv
);
5648 iwl3945_reg_txpower_periodic(priv
);
5650 iwl3945_led_register(priv
);
5652 IWL_DEBUG_INFO("ALIVE processing complete.\n");
5653 set_bit(STATUS_READY
, &priv
->status
);
5654 wake_up_interruptible(&priv
->wait_command_queue
);
5656 if (priv
->error_recovering
)
5657 iwl3945_error_recovery(priv
);
5659 /* reassociate for ADHOC mode */
5660 if (priv
->vif
&& (priv
->iw_mode
== NL80211_IFTYPE_ADHOC
)) {
5661 struct sk_buff
*beacon
= ieee80211_beacon_get(priv
->hw
,
5664 iwl3945_mac_beacon_update(priv
->hw
, beacon
);
5670 queue_work(priv
->workqueue
, &priv
->restart
);
5673 static void iwl3945_cancel_deferred_work(struct iwl3945_priv
*priv
);
5675 static void __iwl3945_down(struct iwl3945_priv
*priv
)
5677 unsigned long flags
;
5678 int exit_pending
= test_bit(STATUS_EXIT_PENDING
, &priv
->status
);
5679 struct ieee80211_conf
*conf
= NULL
;
5681 IWL_DEBUG_INFO(DRV_NAME
" is going down\n");
5683 conf
= ieee80211_get_hw_conf(priv
->hw
);
5686 set_bit(STATUS_EXIT_PENDING
, &priv
->status
);
5688 iwl3945_led_unregister(priv
);
5689 iwl3945_clear_stations_table(priv
);
5691 /* Unblock any waiting calls */
5692 wake_up_interruptible_all(&priv
->wait_command_queue
);
5694 /* Wipe out the EXIT_PENDING status bit if we are not actually
5695 * exiting the module */
5697 clear_bit(STATUS_EXIT_PENDING
, &priv
->status
);
5699 /* stop and reset the on-board processor */
5700 iwl3945_write32(priv
, CSR_RESET
, CSR_RESET_REG_FLAG_NEVO_RESET
);
5702 /* tell the device to stop sending interrupts */
5703 spin_lock_irqsave(&priv
->lock
, flags
);
5704 iwl3945_disable_interrupts(priv
);
5705 spin_unlock_irqrestore(&priv
->lock
, flags
);
5706 iwl_synchronize_irq(priv
);
5708 if (priv
->mac80211_registered
)
5709 ieee80211_stop_queues(priv
->hw
);
5711 /* If we have not previously called iwl3945_init() then
5712 * clear all bits but the RF Kill and SUSPEND bits and return */
5713 if (!iwl3945_is_init(priv
)) {
5714 priv
->status
= test_bit(STATUS_RF_KILL_HW
, &priv
->status
) <<
5716 test_bit(STATUS_RF_KILL_SW
, &priv
->status
) <<
5718 test_bit(STATUS_GEO_CONFIGURED
, &priv
->status
) <<
5719 STATUS_GEO_CONFIGURED
|
5720 test_bit(STATUS_IN_SUSPEND
, &priv
->status
) <<
5722 test_bit(STATUS_EXIT_PENDING
, &priv
->status
) <<
5723 STATUS_EXIT_PENDING
;
5727 /* ...otherwise clear out all the status bits but the RF Kill and
5728 * SUSPEND bits and continue taking the NIC down. */
5729 priv
->status
&= test_bit(STATUS_RF_KILL_HW
, &priv
->status
) <<
5731 test_bit(STATUS_RF_KILL_SW
, &priv
->status
) <<
5733 test_bit(STATUS_GEO_CONFIGURED
, &priv
->status
) <<
5734 STATUS_GEO_CONFIGURED
|
5735 test_bit(STATUS_IN_SUSPEND
, &priv
->status
) <<
5737 test_bit(STATUS_FW_ERROR
, &priv
->status
) <<
5739 test_bit(STATUS_EXIT_PENDING
, &priv
->status
) <<
5740 STATUS_EXIT_PENDING
;
5742 spin_lock_irqsave(&priv
->lock
, flags
);
5743 iwl3945_clear_bit(priv
, CSR_GP_CNTRL
, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ
);
5744 spin_unlock_irqrestore(&priv
->lock
, flags
);
5746 iwl3945_hw_txq_ctx_stop(priv
);
5747 iwl3945_hw_rxq_stop(priv
);
5749 spin_lock_irqsave(&priv
->lock
, flags
);
5750 if (!iwl3945_grab_nic_access(priv
)) {
5751 iwl3945_write_prph(priv
, APMG_CLK_DIS_REG
,
5752 APMG_CLK_VAL_DMA_CLK_RQT
);
5753 iwl3945_release_nic_access(priv
);
5755 spin_unlock_irqrestore(&priv
->lock
, flags
);
5759 iwl3945_hw_nic_stop_master(priv
);
5760 iwl3945_set_bit(priv
, CSR_RESET
, CSR_RESET_REG_FLAG_SW_RESET
);
5761 iwl3945_hw_nic_reset(priv
);
5764 memset(&priv
->card_alive
, 0, sizeof(struct iwl_alive_resp
));
5766 if (priv
->ibss_beacon
)
5767 dev_kfree_skb(priv
->ibss_beacon
);
5768 priv
->ibss_beacon
= NULL
;
5770 /* clear out any free frames */
5771 iwl3945_clear_free_frames(priv
);
5774 static void iwl3945_down(struct iwl3945_priv
*priv
)
5776 mutex_lock(&priv
->mutex
);
5777 __iwl3945_down(priv
);
5778 mutex_unlock(&priv
->mutex
);
5780 iwl3945_cancel_deferred_work(priv
);
5783 #define MAX_HW_RESTARTS 5
5785 static int __iwl3945_up(struct iwl3945_priv
*priv
)
5789 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
)) {
5790 IWL_WARNING("Exit pending; will not bring the NIC up\n");
5794 if (test_bit(STATUS_RF_KILL_SW
, &priv
->status
)) {
5795 IWL_WARNING("Radio disabled by SW RF kill (module "
5800 if (!priv
->ucode_data_backup
.v_addr
|| !priv
->ucode_data
.v_addr
) {
5801 IWL_ERROR("ucode not available for device bring up\n");
5805 /* If platform's RF_KILL switch is NOT set to KILL */
5806 if (iwl3945_read32(priv
, CSR_GP_CNTRL
) &
5807 CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW
)
5808 clear_bit(STATUS_RF_KILL_HW
, &priv
->status
);
5810 set_bit(STATUS_RF_KILL_HW
, &priv
->status
);
5811 if (!test_bit(STATUS_IN_SUSPEND
, &priv
->status
)) {
5812 IWL_WARNING("Radio disabled by HW RF Kill switch\n");
5817 iwl3945_write32(priv
, CSR_INT
, 0xFFFFFFFF);
5819 rc
= iwl3945_hw_nic_init(priv
);
5821 IWL_ERROR("Unable to int nic\n");
5825 /* make sure rfkill handshake bits are cleared */
5826 iwl3945_write32(priv
, CSR_UCODE_DRV_GP1_CLR
, CSR_UCODE_SW_BIT_RFKILL
);
5827 iwl3945_write32(priv
, CSR_UCODE_DRV_GP1_CLR
,
5828 CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED
);
5830 /* clear (again), then enable host interrupts */
5831 iwl3945_write32(priv
, CSR_INT
, 0xFFFFFFFF);
5832 iwl3945_enable_interrupts(priv
);
5834 /* really make sure rfkill handshake bits are cleared */
5835 iwl3945_write32(priv
, CSR_UCODE_DRV_GP1_CLR
, CSR_UCODE_SW_BIT_RFKILL
);
5836 iwl3945_write32(priv
, CSR_UCODE_DRV_GP1_CLR
, CSR_UCODE_SW_BIT_RFKILL
);
5838 /* Copy original ucode data image from disk into backup cache.
5839 * This will be used to initialize the on-board processor's
5840 * data SRAM for a clean start when the runtime program first loads. */
5841 memcpy(priv
->ucode_data_backup
.v_addr
, priv
->ucode_data
.v_addr
,
5842 priv
->ucode_data
.len
);
5844 /* We return success when we resume from suspend and rf_kill is on. */
5845 if (test_bit(STATUS_RF_KILL_HW
, &priv
->status
))
5848 for (i
= 0; i
< MAX_HW_RESTARTS
; i
++) {
5850 iwl3945_clear_stations_table(priv
);
5852 /* load bootstrap state machine,
5853 * load bootstrap program into processor's memory,
5854 * prepare to load the "initialize" uCode */
5855 rc
= iwl3945_load_bsm(priv
);
5858 IWL_ERROR("Unable to set up bootstrap uCode: %d\n", rc
);
5862 /* start card; "initialize" will load runtime ucode */
5863 iwl3945_nic_start(priv
);
5865 IWL_DEBUG_INFO(DRV_NAME
" is coming up\n");
5870 set_bit(STATUS_EXIT_PENDING
, &priv
->status
);
5871 __iwl3945_down(priv
);
5872 clear_bit(STATUS_EXIT_PENDING
, &priv
->status
);
5874 /* tried to restart and config the device for as long as our
5875 * patience could withstand */
5876 IWL_ERROR("Unable to initialize device after %d attempts.\n", i
);
5881 /*****************************************************************************
5883 * Workqueue callbacks
5885 *****************************************************************************/
5887 static void iwl3945_bg_init_alive_start(struct work_struct
*data
)
5889 struct iwl3945_priv
*priv
=
5890 container_of(data
, struct iwl3945_priv
, init_alive_start
.work
);
5892 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
5895 mutex_lock(&priv
->mutex
);
5896 iwl3945_init_alive_start(priv
);
5897 mutex_unlock(&priv
->mutex
);
5900 static void iwl3945_bg_alive_start(struct work_struct
*data
)
5902 struct iwl3945_priv
*priv
=
5903 container_of(data
, struct iwl3945_priv
, alive_start
.work
);
5905 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
5908 mutex_lock(&priv
->mutex
);
5909 iwl3945_alive_start(priv
);
5910 mutex_unlock(&priv
->mutex
);
5913 static void iwl3945_bg_rf_kill(struct work_struct
*work
)
5915 struct iwl3945_priv
*priv
= container_of(work
, struct iwl3945_priv
, rf_kill
);
5917 wake_up_interruptible(&priv
->wait_command_queue
);
5919 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
5922 mutex_lock(&priv
->mutex
);
5924 if (!iwl3945_is_rfkill(priv
)) {
5925 IWL_DEBUG(IWL_DL_INFO
| IWL_DL_RF_KILL
,
5926 "HW and/or SW RF Kill no longer active, restarting "
5928 if (!test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
5929 queue_work(priv
->workqueue
, &priv
->restart
);
5932 if (!test_bit(STATUS_RF_KILL_HW
, &priv
->status
))
5933 IWL_DEBUG_RF_KILL("Can not turn radio back on - "
5934 "disabled by SW switch\n");
5936 IWL_WARNING("Radio Frequency Kill Switch is On:\n"
5937 "Kill switch must be turned off for "
5938 "wireless networking to work.\n");
5941 mutex_unlock(&priv
->mutex
);
5942 iwl3945_rfkill_set_hw_state(priv
);
5945 #define IWL_SCAN_CHECK_WATCHDOG (7 * HZ)
5947 static void iwl3945_bg_scan_check(struct work_struct
*data
)
5949 struct iwl3945_priv
*priv
=
5950 container_of(data
, struct iwl3945_priv
, scan_check
.work
);
5952 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
5955 mutex_lock(&priv
->mutex
);
5956 if (test_bit(STATUS_SCANNING
, &priv
->status
) ||
5957 test_bit(STATUS_SCAN_ABORTING
, &priv
->status
)) {
5958 IWL_DEBUG(IWL_DL_INFO
| IWL_DL_SCAN
,
5959 "Scan completion watchdog resetting adapter (%dms)\n",
5960 jiffies_to_msecs(IWL_SCAN_CHECK_WATCHDOG
));
5962 if (!test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
5963 iwl3945_send_scan_abort(priv
);
5965 mutex_unlock(&priv
->mutex
);
5968 static void iwl3945_bg_request_scan(struct work_struct
*data
)
5970 struct iwl3945_priv
*priv
=
5971 container_of(data
, struct iwl3945_priv
, request_scan
);
5972 struct iwl3945_host_cmd cmd
= {
5973 .id
= REPLY_SCAN_CMD
,
5974 .len
= sizeof(struct iwl3945_scan_cmd
),
5975 .meta
.flags
= CMD_SIZE_HUGE
,
5978 struct iwl3945_scan_cmd
*scan
;
5979 struct ieee80211_conf
*conf
= NULL
;
5981 enum ieee80211_band band
;
5982 DECLARE_SSID_BUF(ssid
);
5984 conf
= ieee80211_get_hw_conf(priv
->hw
);
5986 mutex_lock(&priv
->mutex
);
5988 if (!iwl3945_is_ready(priv
)) {
5989 IWL_WARNING("request scan called when driver not ready.\n");
5993 /* Make sure the scan wasn't canceled before this queued work
5994 * was given the chance to run... */
5995 if (!test_bit(STATUS_SCANNING
, &priv
->status
))
5998 /* This should never be called or scheduled if there is currently
5999 * a scan active in the hardware. */
6000 if (test_bit(STATUS_SCAN_HW
, &priv
->status
)) {
6001 IWL_DEBUG_INFO("Multiple concurrent scan requests in parallel. "
6002 "Ignoring second request.\n");
6007 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
)) {
6008 IWL_DEBUG_SCAN("Aborting scan due to device shutdown\n");
6012 if (test_bit(STATUS_SCAN_ABORTING
, &priv
->status
)) {
6013 IWL_DEBUG_HC("Scan request while abort pending. Queuing.\n");
6017 if (iwl3945_is_rfkill(priv
)) {
6018 IWL_DEBUG_HC("Aborting scan due to RF Kill activation\n");
6022 if (!test_bit(STATUS_READY
, &priv
->status
)) {
6023 IWL_DEBUG_HC("Scan request while uninitialized. Queuing.\n");
6027 if (!priv
->scan_bands
) {
6028 IWL_DEBUG_HC("Aborting scan due to no requested bands\n");
6033 priv
->scan
= kmalloc(sizeof(struct iwl3945_scan_cmd
) +
6034 IWL_MAX_SCAN_SIZE
, GFP_KERNEL
);
6041 memset(scan
, 0, sizeof(struct iwl3945_scan_cmd
) + IWL_MAX_SCAN_SIZE
);
6043 scan
->quiet_plcp_th
= IWL_PLCP_QUIET_THRESH
;
6044 scan
->quiet_time
= IWL_ACTIVE_QUIET_TIME
;
6046 if (iwl3945_is_associated(priv
)) {
6049 u32 suspend_time
= 100;
6050 u32 scan_suspend_time
= 100;
6051 unsigned long flags
;
6053 IWL_DEBUG_INFO("Scanning while associated...\n");
6055 spin_lock_irqsave(&priv
->lock
, flags
);
6056 interval
= priv
->beacon_int
;
6057 spin_unlock_irqrestore(&priv
->lock
, flags
);
6059 scan
->suspend_time
= 0;
6060 scan
->max_out_time
= cpu_to_le32(200 * 1024);
6062 interval
= suspend_time
;
6064 * suspend time format:
6065 * 0-19: beacon interval in usec (time before exec.)
6067 * 24-31: number of beacons (suspend between channels)
6070 extra
= (suspend_time
/ interval
) << 24;
6071 scan_suspend_time
= 0xFF0FFFFF &
6072 (extra
| ((suspend_time
% interval
) * 1024));
6074 scan
->suspend_time
= cpu_to_le32(scan_suspend_time
);
6075 IWL_DEBUG_SCAN("suspend_time 0x%X beacon interval %d\n",
6076 scan_suspend_time
, interval
);
6079 /* We should add the ability for user to lock to PASSIVE ONLY */
6080 if (priv
->one_direct_scan
) {
6082 ("Kicking off one direct scan for '%s'\n",
6083 print_ssid(ssid
, priv
->direct_ssid
,
6084 priv
->direct_ssid_len
));
6085 scan
->direct_scan
[0].id
= WLAN_EID_SSID
;
6086 scan
->direct_scan
[0].len
= priv
->direct_ssid_len
;
6087 memcpy(scan
->direct_scan
[0].ssid
,
6088 priv
->direct_ssid
, priv
->direct_ssid_len
);
6091 IWL_DEBUG_SCAN("Kicking off one indirect scan.\n");
6093 /* We don't build a direct scan probe request; the uCode will do
6094 * that based on the direct_mask added to each channel entry */
6095 scan
->tx_cmd
.len
= cpu_to_le16(
6096 iwl3945_fill_probe_req(priv
, (struct ieee80211_mgmt
*)scan
->data
,
6097 IWL_MAX_SCAN_SIZE
- sizeof(*scan
)));
6098 scan
->tx_cmd
.tx_flags
= TX_CMD_FLG_SEQ_CTL_MSK
;
6099 scan
->tx_cmd
.sta_id
= priv
->hw_setting
.bcast_sta_id
;
6100 scan
->tx_cmd
.stop_time
.life_time
= TX_CMD_LIFE_TIME_INFINITE
;
6102 /* flags + rate selection */
6104 if (priv
->scan_bands
& BIT(IEEE80211_BAND_2GHZ
)) {
6105 scan
->flags
= RXON_FLG_BAND_24G_MSK
| RXON_FLG_AUTO_DETECT_MSK
;
6106 scan
->tx_cmd
.rate
= IWL_RATE_1M_PLCP
;
6107 scan
->good_CRC_th
= 0;
6108 band
= IEEE80211_BAND_2GHZ
;
6109 } else if (priv
->scan_bands
& BIT(IEEE80211_BAND_5GHZ
)) {
6110 scan
->tx_cmd
.rate
= IWL_RATE_6M_PLCP
;
6111 scan
->good_CRC_th
= IWL_GOOD_CRC_TH
;
6112 band
= IEEE80211_BAND_5GHZ
;
6114 IWL_WARNING("Invalid scan band count\n");
6118 /* select Rx antennas */
6119 scan
->flags
|= iwl3945_get_antenna_flags(priv
);
6121 if (priv
->iw_mode
== NL80211_IFTYPE_MONITOR
)
6122 scan
->filter_flags
= RXON_FILTER_PROMISC_MSK
;
6124 scan
->channel_count
=
6125 iwl3945_get_channels_for_scan(priv
, band
, 1, /* active */
6127 (void *)&scan
->data
[le16_to_cpu(scan
->tx_cmd
.len
)]);
6129 if (scan
->channel_count
== 0) {
6130 IWL_DEBUG_SCAN("channel count %d\n", scan
->channel_count
);
6134 cmd
.len
+= le16_to_cpu(scan
->tx_cmd
.len
) +
6135 scan
->channel_count
* sizeof(struct iwl3945_scan_channel
);
6137 scan
->len
= cpu_to_le16(cmd
.len
);
6139 set_bit(STATUS_SCAN_HW
, &priv
->status
);
6140 rc
= iwl3945_send_cmd_sync(priv
, &cmd
);
6144 queue_delayed_work(priv
->workqueue
, &priv
->scan_check
,
6145 IWL_SCAN_CHECK_WATCHDOG
);
6147 mutex_unlock(&priv
->mutex
);
6151 /* can not perform scan make sure we clear scanning
6152 * bits from status so next scan request can be performed.
6153 * if we dont clear scanning status bit here all next scan
6156 clear_bit(STATUS_SCAN_HW
, &priv
->status
);
6157 clear_bit(STATUS_SCANNING
, &priv
->status
);
6159 /* inform mac80211 scan aborted */
6160 queue_work(priv
->workqueue
, &priv
->scan_completed
);
6161 mutex_unlock(&priv
->mutex
);
6164 static void iwl3945_bg_up(struct work_struct
*data
)
6166 struct iwl3945_priv
*priv
= container_of(data
, struct iwl3945_priv
, up
);
6168 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
6171 mutex_lock(&priv
->mutex
);
6173 mutex_unlock(&priv
->mutex
);
6174 iwl3945_rfkill_set_hw_state(priv
);
6177 static void iwl3945_bg_restart(struct work_struct
*data
)
6179 struct iwl3945_priv
*priv
= container_of(data
, struct iwl3945_priv
, restart
);
6181 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
6185 queue_work(priv
->workqueue
, &priv
->up
);
6188 static void iwl3945_bg_rx_replenish(struct work_struct
*data
)
6190 struct iwl3945_priv
*priv
=
6191 container_of(data
, struct iwl3945_priv
, rx_replenish
);
6193 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
6196 mutex_lock(&priv
->mutex
);
6197 iwl3945_rx_replenish(priv
);
6198 mutex_unlock(&priv
->mutex
);
6201 #define IWL_DELAY_NEXT_SCAN (HZ*2)
6203 static void iwl3945_post_associate(struct iwl3945_priv
*priv
)
6206 struct ieee80211_conf
*conf
= NULL
;
6208 if (priv
->iw_mode
== NL80211_IFTYPE_AP
) {
6209 IWL_ERROR("%s Should not be called in AP mode\n", __func__
);
6214 IWL_DEBUG_ASSOC("Associated as %d to: %pM\n",
6215 priv
->assoc_id
, priv
->active_rxon
.bssid_addr
);
6217 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
6220 if (!priv
->vif
|| !priv
->is_open
)
6223 iwl3945_scan_cancel_timeout(priv
, 200);
6225 conf
= ieee80211_get_hw_conf(priv
->hw
);
6227 priv
->staging_rxon
.filter_flags
&= ~RXON_FILTER_ASSOC_MSK
;
6228 iwl3945_commit_rxon(priv
);
6230 memset(&priv
->rxon_timing
, 0, sizeof(struct iwl_rxon_time_cmd
));
6231 iwl3945_setup_rxon_timing(priv
);
6232 rc
= iwl3945_send_cmd_pdu(priv
, REPLY_RXON_TIMING
,
6233 sizeof(priv
->rxon_timing
), &priv
->rxon_timing
);
6235 IWL_WARNING("REPLY_RXON_TIMING failed - "
6236 "Attempting to continue.\n");
6238 priv
->staging_rxon
.filter_flags
|= RXON_FILTER_ASSOC_MSK
;
6240 priv
->staging_rxon
.assoc_id
= cpu_to_le16(priv
->assoc_id
);
6242 IWL_DEBUG_ASSOC("assoc id %d beacon interval %d\n",
6243 priv
->assoc_id
, priv
->beacon_int
);
6245 if (priv
->assoc_capability
& WLAN_CAPABILITY_SHORT_PREAMBLE
)
6246 priv
->staging_rxon
.flags
|= RXON_FLG_SHORT_PREAMBLE_MSK
;
6248 priv
->staging_rxon
.flags
&= ~RXON_FLG_SHORT_PREAMBLE_MSK
;
6250 if (priv
->staging_rxon
.flags
& RXON_FLG_BAND_24G_MSK
) {
6251 if (priv
->assoc_capability
& WLAN_CAPABILITY_SHORT_SLOT_TIME
)
6252 priv
->staging_rxon
.flags
|= RXON_FLG_SHORT_SLOT_MSK
;
6254 priv
->staging_rxon
.flags
&= ~RXON_FLG_SHORT_SLOT_MSK
;
6256 if (priv
->iw_mode
== NL80211_IFTYPE_ADHOC
)
6257 priv
->staging_rxon
.flags
&= ~RXON_FLG_SHORT_SLOT_MSK
;
6261 iwl3945_commit_rxon(priv
);
6263 switch (priv
->iw_mode
) {
6264 case NL80211_IFTYPE_STATION
:
6265 iwl3945_rate_scale_init(priv
->hw
, IWL_AP_ID
);
6268 case NL80211_IFTYPE_ADHOC
:
6271 iwl3945_add_station(priv
, priv
->bssid
, 0, 0);
6272 iwl3945_sync_sta(priv
, IWL_STA_ID
,
6273 (priv
->band
== IEEE80211_BAND_5GHZ
) ?
6274 IWL_RATE_6M_PLCP
: IWL_RATE_1M_PLCP
,
6276 iwl3945_rate_scale_init(priv
->hw
, IWL_STA_ID
);
6277 iwl3945_send_beacon_cmd(priv
);
6282 IWL_ERROR("%s Should not be called in %d mode\n",
6283 __func__
, priv
->iw_mode
);
6287 iwl3945_activate_qos(priv
, 0);
6289 /* we have just associated, don't start scan too early */
6290 priv
->next_scan_jiffies
= jiffies
+ IWL_DELAY_NEXT_SCAN
;
6293 static void iwl3945_bg_abort_scan(struct work_struct
*work
)
6295 struct iwl3945_priv
*priv
= container_of(work
, struct iwl3945_priv
, abort_scan
);
6297 if (!iwl3945_is_ready(priv
))
6300 mutex_lock(&priv
->mutex
);
6302 set_bit(STATUS_SCAN_ABORTING
, &priv
->status
);
6303 iwl3945_send_scan_abort(priv
);
6305 mutex_unlock(&priv
->mutex
);
6308 static int iwl3945_mac_config(struct ieee80211_hw
*hw
, u32 changed
);
6310 static void iwl3945_bg_scan_completed(struct work_struct
*work
)
6312 struct iwl3945_priv
*priv
=
6313 container_of(work
, struct iwl3945_priv
, scan_completed
);
6315 IWL_DEBUG(IWL_DL_INFO
| IWL_DL_SCAN
, "SCAN complete scan\n");
6317 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
6320 if (test_bit(STATUS_CONF_PENDING
, &priv
->status
))
6321 iwl3945_mac_config(priv
->hw
, 0);
6323 ieee80211_scan_completed(priv
->hw
);
6325 /* Since setting the TXPOWER may have been deferred while
6326 * performing the scan, fire one off */
6327 mutex_lock(&priv
->mutex
);
6328 iwl3945_hw_reg_send_txpower(priv
);
6329 mutex_unlock(&priv
->mutex
);
6332 /*****************************************************************************
6334 * mac80211 entry point functions
6336 *****************************************************************************/
6338 #define UCODE_READY_TIMEOUT (2 * HZ)
6340 static int iwl3945_mac_start(struct ieee80211_hw
*hw
)
6342 struct iwl3945_priv
*priv
= hw
->priv
;
6345 IWL_DEBUG_MAC80211("enter\n");
6347 if (pci_enable_device(priv
->pci_dev
)) {
6348 IWL_ERROR("Fail to pci_enable_device\n");
6351 pci_restore_state(priv
->pci_dev
);
6352 pci_enable_msi(priv
->pci_dev
);
6354 ret
= request_irq(priv
->pci_dev
->irq
, iwl3945_isr
, IRQF_SHARED
,
6357 IWL_ERROR("Error allocating IRQ %d\n", priv
->pci_dev
->irq
);
6358 goto out_disable_msi
;
6361 /* we should be verifying the device is ready to be opened */
6362 mutex_lock(&priv
->mutex
);
6364 memset(&priv
->staging_rxon
, 0, sizeof(struct iwl3945_rxon_cmd
));
6365 /* fetch ucode file from disk, alloc and copy to bus-master buffers ...
6366 * ucode filename and max sizes are card-specific. */
6368 if (!priv
->ucode_code
.len
) {
6369 ret
= iwl3945_read_ucode(priv
);
6371 IWL_ERROR("Could not read microcode: %d\n", ret
);
6372 mutex_unlock(&priv
->mutex
);
6373 goto out_release_irq
;
6377 ret
= __iwl3945_up(priv
);
6379 mutex_unlock(&priv
->mutex
);
6381 iwl3945_rfkill_set_hw_state(priv
);
6384 goto out_release_irq
;
6386 IWL_DEBUG_INFO("Start UP work.\n");
6388 if (test_bit(STATUS_IN_SUSPEND
, &priv
->status
))
6391 /* Wait for START_ALIVE from ucode. Otherwise callbacks from
6392 * mac80211 will not be run successfully. */
6393 ret
= wait_event_interruptible_timeout(priv
->wait_command_queue
,
6394 test_bit(STATUS_READY
, &priv
->status
),
6395 UCODE_READY_TIMEOUT
);
6397 if (!test_bit(STATUS_READY
, &priv
->status
)) {
6398 IWL_ERROR("Wait for START_ALIVE timeout after %dms.\n",
6399 jiffies_to_msecs(UCODE_READY_TIMEOUT
));
6401 goto out_release_irq
;
6406 IWL_DEBUG_MAC80211("leave\n");
6410 free_irq(priv
->pci_dev
->irq
, priv
);
6412 pci_disable_msi(priv
->pci_dev
);
6413 pci_disable_device(priv
->pci_dev
);
6415 IWL_DEBUG_MAC80211("leave - failed\n");
6419 static void iwl3945_mac_stop(struct ieee80211_hw
*hw
)
6421 struct iwl3945_priv
*priv
= hw
->priv
;
6423 IWL_DEBUG_MAC80211("enter\n");
6425 if (!priv
->is_open
) {
6426 IWL_DEBUG_MAC80211("leave - skip\n");
6432 if (iwl3945_is_ready_rf(priv
)) {
6433 /* stop mac, cancel any scan request and clear
6434 * RXON_FILTER_ASSOC_MSK BIT
6436 mutex_lock(&priv
->mutex
);
6437 iwl3945_scan_cancel_timeout(priv
, 100);
6438 mutex_unlock(&priv
->mutex
);
6443 flush_workqueue(priv
->workqueue
);
6444 free_irq(priv
->pci_dev
->irq
, priv
);
6445 pci_disable_msi(priv
->pci_dev
);
6446 pci_save_state(priv
->pci_dev
);
6447 pci_disable_device(priv
->pci_dev
);
6449 IWL_DEBUG_MAC80211("leave\n");
6452 static int iwl3945_mac_tx(struct ieee80211_hw
*hw
, struct sk_buff
*skb
)
6454 struct iwl3945_priv
*priv
= hw
->priv
;
6456 IWL_DEBUG_MAC80211("enter\n");
6458 IWL_DEBUG_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb
->len
,
6459 ieee80211_get_tx_rate(hw
, IEEE80211_SKB_CB(skb
))->bitrate
);
6461 if (iwl3945_tx_skb(priv
, skb
))
6462 dev_kfree_skb_any(skb
);
6464 IWL_DEBUG_MAC80211("leave\n");
6465 return NETDEV_TX_OK
;
6468 static int iwl3945_mac_add_interface(struct ieee80211_hw
*hw
,
6469 struct ieee80211_if_init_conf
*conf
)
6471 struct iwl3945_priv
*priv
= hw
->priv
;
6472 unsigned long flags
;
6474 IWL_DEBUG_MAC80211("enter: type %d\n", conf
->type
);
6477 IWL_DEBUG_MAC80211("leave - vif != NULL\n");
6481 spin_lock_irqsave(&priv
->lock
, flags
);
6482 priv
->vif
= conf
->vif
;
6483 priv
->iw_mode
= conf
->type
;
6485 spin_unlock_irqrestore(&priv
->lock
, flags
);
6487 mutex_lock(&priv
->mutex
);
6489 if (conf
->mac_addr
) {
6490 IWL_DEBUG_MAC80211("Set: %pM\n", conf
->mac_addr
);
6491 memcpy(priv
->mac_addr
, conf
->mac_addr
, ETH_ALEN
);
6494 if (iwl3945_is_ready(priv
))
6495 iwl3945_set_mode(priv
, conf
->type
);
6497 mutex_unlock(&priv
->mutex
);
6499 IWL_DEBUG_MAC80211("leave\n");
6504 * iwl3945_mac_config - mac80211 config callback
6506 * We ignore conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME since it seems to
6507 * be set inappropriately and the driver currently sets the hardware up to
6508 * use it whenever needed.
6510 static int iwl3945_mac_config(struct ieee80211_hw
*hw
, u32 changed
)
6512 struct iwl3945_priv
*priv
= hw
->priv
;
6513 const struct iwl_channel_info
*ch_info
;
6514 struct ieee80211_conf
*conf
= &hw
->conf
;
6515 unsigned long flags
;
6518 mutex_lock(&priv
->mutex
);
6519 IWL_DEBUG_MAC80211("enter to channel %d\n", conf
->channel
->hw_value
);
6521 if (!iwl3945_is_ready(priv
)) {
6522 IWL_DEBUG_MAC80211("leave - not ready\n");
6527 if (unlikely(!iwl3945_param_disable_hw_scan
&&
6528 test_bit(STATUS_SCANNING
, &priv
->status
))) {
6529 IWL_DEBUG_MAC80211("leave - scanning\n");
6530 set_bit(STATUS_CONF_PENDING
, &priv
->status
);
6531 mutex_unlock(&priv
->mutex
);
6535 spin_lock_irqsave(&priv
->lock
, flags
);
6537 ch_info
= iwl3945_get_channel_info(priv
, conf
->channel
->band
,
6538 conf
->channel
->hw_value
);
6539 if (!is_channel_valid(ch_info
)) {
6540 IWL_DEBUG_SCAN("Channel %d [%d] is INVALID for this band.\n",
6541 conf
->channel
->hw_value
, conf
->channel
->band
);
6542 IWL_DEBUG_MAC80211("leave - invalid channel\n");
6543 spin_unlock_irqrestore(&priv
->lock
, flags
);
6548 iwl3945_set_rxon_channel(priv
, conf
->channel
->band
, conf
->channel
->hw_value
);
6550 iwl3945_set_flags_for_phymode(priv
, conf
->channel
->band
);
6552 /* The list of supported rates and rate mask can be different
6553 * for each phymode; since the phymode may have changed, reset
6554 * the rate mask to what mac80211 lists */
6555 iwl3945_set_rate(priv
);
6557 spin_unlock_irqrestore(&priv
->lock
, flags
);
6559 #ifdef IEEE80211_CONF_CHANNEL_SWITCH
6560 if (conf
->flags
& IEEE80211_CONF_CHANNEL_SWITCH
) {
6561 iwl3945_hw_channel_switch(priv
, conf
->channel
);
6566 iwl3945_radio_kill_sw(priv
, !conf
->radio_enabled
);
6568 if (!conf
->radio_enabled
) {
6569 IWL_DEBUG_MAC80211("leave - radio disabled\n");
6573 if (iwl3945_is_rfkill(priv
)) {
6574 IWL_DEBUG_MAC80211("leave - RF kill\n");
6579 iwl3945_set_rate(priv
);
6581 if (memcmp(&priv
->active_rxon
,
6582 &priv
->staging_rxon
, sizeof(priv
->staging_rxon
)))
6583 iwl3945_commit_rxon(priv
);
6585 IWL_DEBUG_INFO("No re-sending same RXON configuration.\n");
6587 IWL_DEBUG_MAC80211("leave\n");
6590 clear_bit(STATUS_CONF_PENDING
, &priv
->status
);
6591 mutex_unlock(&priv
->mutex
);
6595 static void iwl3945_config_ap(struct iwl3945_priv
*priv
)
6599 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
6602 /* The following should be done only at AP bring up */
6603 if (!(iwl3945_is_associated(priv
))) {
6605 /* RXON - unassoc (to set timing command) */
6606 priv
->staging_rxon
.filter_flags
&= ~RXON_FILTER_ASSOC_MSK
;
6607 iwl3945_commit_rxon(priv
);
6610 memset(&priv
->rxon_timing
, 0, sizeof(struct iwl_rxon_time_cmd
));
6611 iwl3945_setup_rxon_timing(priv
);
6612 rc
= iwl3945_send_cmd_pdu(priv
, REPLY_RXON_TIMING
,
6613 sizeof(priv
->rxon_timing
), &priv
->rxon_timing
);
6615 IWL_WARNING("REPLY_RXON_TIMING failed - "
6616 "Attempting to continue.\n");
6618 /* FIXME: what should be the assoc_id for AP? */
6619 priv
->staging_rxon
.assoc_id
= cpu_to_le16(priv
->assoc_id
);
6620 if (priv
->assoc_capability
& WLAN_CAPABILITY_SHORT_PREAMBLE
)
6621 priv
->staging_rxon
.flags
|=
6622 RXON_FLG_SHORT_PREAMBLE_MSK
;
6624 priv
->staging_rxon
.flags
&=
6625 ~RXON_FLG_SHORT_PREAMBLE_MSK
;
6627 if (priv
->staging_rxon
.flags
& RXON_FLG_BAND_24G_MSK
) {
6628 if (priv
->assoc_capability
&
6629 WLAN_CAPABILITY_SHORT_SLOT_TIME
)
6630 priv
->staging_rxon
.flags
|=
6631 RXON_FLG_SHORT_SLOT_MSK
;
6633 priv
->staging_rxon
.flags
&=
6634 ~RXON_FLG_SHORT_SLOT_MSK
;
6636 if (priv
->iw_mode
== NL80211_IFTYPE_ADHOC
)
6637 priv
->staging_rxon
.flags
&=
6638 ~RXON_FLG_SHORT_SLOT_MSK
;
6640 /* restore RXON assoc */
6641 priv
->staging_rxon
.filter_flags
|= RXON_FILTER_ASSOC_MSK
;
6642 iwl3945_commit_rxon(priv
);
6643 iwl3945_add_station(priv
, iwl3945_broadcast_addr
, 0, 0);
6645 iwl3945_send_beacon_cmd(priv
);
6647 /* FIXME - we need to add code here to detect a totally new
6648 * configuration, reset the AP, unassoc, rxon timing, assoc,
6649 * clear sta table, add BCAST sta... */
6652 static int iwl3945_mac_config_interface(struct ieee80211_hw
*hw
,
6653 struct ieee80211_vif
*vif
,
6654 struct ieee80211_if_conf
*conf
)
6656 struct iwl3945_priv
*priv
= hw
->priv
;
6662 if (priv
->vif
!= vif
) {
6663 IWL_DEBUG_MAC80211("leave - priv->vif != vif\n");
6667 /* handle this temporarily here */
6668 if (priv
->iw_mode
== NL80211_IFTYPE_ADHOC
&&
6669 conf
->changed
& IEEE80211_IFCC_BEACON
) {
6670 struct sk_buff
*beacon
= ieee80211_beacon_get(hw
, vif
);
6673 mutex_lock(&priv
->mutex
);
6674 rc
= iwl3945_mac_beacon_update(hw
, beacon
);
6675 mutex_unlock(&priv
->mutex
);
6680 if (!iwl3945_is_alive(priv
))
6683 mutex_lock(&priv
->mutex
);
6686 IWL_DEBUG_MAC80211("bssid: %pM\n", conf
->bssid
);
6689 * very dubious code was here; the probe filtering flag is never set:
6691 if (unlikely(test_bit(STATUS_SCANNING, &priv->status)) &&
6692 !(priv->hw->flags & IEEE80211_HW_NO_PROBE_FILTERING)) {
6695 if (priv
->iw_mode
== NL80211_IFTYPE_AP
) {
6697 conf
->bssid
= priv
->mac_addr
;
6698 memcpy(priv
->bssid
, priv
->mac_addr
, ETH_ALEN
);
6699 IWL_DEBUG_MAC80211("bssid was set to: %pM\n",
6702 if (priv
->ibss_beacon
)
6703 dev_kfree_skb(priv
->ibss_beacon
);
6705 priv
->ibss_beacon
= ieee80211_beacon_get(hw
, vif
);
6708 if (iwl3945_is_rfkill(priv
))
6711 if (conf
->bssid
&& !is_zero_ether_addr(conf
->bssid
) &&
6712 !is_multicast_ether_addr(conf
->bssid
)) {
6713 /* If there is currently a HW scan going on in the background
6714 * then we need to cancel it else the RXON below will fail. */
6715 if (iwl3945_scan_cancel_timeout(priv
, 100)) {
6716 IWL_WARNING("Aborted scan still in progress "
6718 IWL_DEBUG_MAC80211("leaving - scan abort failed.\n");
6719 mutex_unlock(&priv
->mutex
);
6722 memcpy(priv
->staging_rxon
.bssid_addr
, conf
->bssid
, ETH_ALEN
);
6724 /* TODO: Audit driver for usage of these members and see
6725 * if mac80211 deprecates them (priv->bssid looks like it
6726 * shouldn't be there, but I haven't scanned the IBSS code
6727 * to verify) - jpk */
6728 memcpy(priv
->bssid
, conf
->bssid
, ETH_ALEN
);
6730 if (priv
->iw_mode
== NL80211_IFTYPE_AP
)
6731 iwl3945_config_ap(priv
);
6733 rc
= iwl3945_commit_rxon(priv
);
6734 if ((priv
->iw_mode
== NL80211_IFTYPE_STATION
) && rc
)
6735 iwl3945_add_station(priv
,
6736 priv
->active_rxon
.bssid_addr
, 1, 0);
6740 iwl3945_scan_cancel_timeout(priv
, 100);
6741 priv
->staging_rxon
.filter_flags
&= ~RXON_FILTER_ASSOC_MSK
;
6742 iwl3945_commit_rxon(priv
);
6746 IWL_DEBUG_MAC80211("leave\n");
6747 mutex_unlock(&priv
->mutex
);
6752 static void iwl3945_configure_filter(struct ieee80211_hw
*hw
,
6753 unsigned int changed_flags
,
6754 unsigned int *total_flags
,
6755 int mc_count
, struct dev_addr_list
*mc_list
)
6757 struct iwl3945_priv
*priv
= hw
->priv
;
6758 __le32
*filter_flags
= &priv
->staging_rxon
.filter_flags
;
6760 IWL_DEBUG_MAC80211("Enter: changed: 0x%x, total: 0x%x\n",
6761 changed_flags
, *total_flags
);
6763 if (changed_flags
& (FIF_OTHER_BSS
| FIF_PROMISC_IN_BSS
)) {
6764 if (*total_flags
& (FIF_OTHER_BSS
| FIF_PROMISC_IN_BSS
))
6765 *filter_flags
|= RXON_FILTER_PROMISC_MSK
;
6767 *filter_flags
&= ~RXON_FILTER_PROMISC_MSK
;
6769 if (changed_flags
& FIF_ALLMULTI
) {
6770 if (*total_flags
& FIF_ALLMULTI
)
6771 *filter_flags
|= RXON_FILTER_ACCEPT_GRP_MSK
;
6773 *filter_flags
&= ~RXON_FILTER_ACCEPT_GRP_MSK
;
6775 if (changed_flags
& FIF_CONTROL
) {
6776 if (*total_flags
& FIF_CONTROL
)
6777 *filter_flags
|= RXON_FILTER_CTL2HOST_MSK
;
6779 *filter_flags
&= ~RXON_FILTER_CTL2HOST_MSK
;
6781 if (changed_flags
& FIF_BCN_PRBRESP_PROMISC
) {
6782 if (*total_flags
& FIF_BCN_PRBRESP_PROMISC
)
6783 *filter_flags
|= RXON_FILTER_BCON_AWARE_MSK
;
6785 *filter_flags
&= ~RXON_FILTER_BCON_AWARE_MSK
;
6788 /* We avoid iwl_commit_rxon here to commit the new filter flags
6789 * since mac80211 will call ieee80211_hw_config immediately.
6790 * (mc_list is not supported at this time). Otherwise, we need to
6791 * queue a background iwl_commit_rxon work.
6794 *total_flags
&= FIF_OTHER_BSS
| FIF_ALLMULTI
| FIF_PROMISC_IN_BSS
|
6795 FIF_BCN_PRBRESP_PROMISC
| FIF_CONTROL
;
6798 static void iwl3945_mac_remove_interface(struct ieee80211_hw
*hw
,
6799 struct ieee80211_if_init_conf
*conf
)
6801 struct iwl3945_priv
*priv
= hw
->priv
;
6803 IWL_DEBUG_MAC80211("enter\n");
6805 mutex_lock(&priv
->mutex
);
6807 if (iwl3945_is_ready_rf(priv
)) {
6808 iwl3945_scan_cancel_timeout(priv
, 100);
6809 priv
->staging_rxon
.filter_flags
&= ~RXON_FILTER_ASSOC_MSK
;
6810 iwl3945_commit_rxon(priv
);
6812 if (priv
->vif
== conf
->vif
) {
6814 memset(priv
->bssid
, 0, ETH_ALEN
);
6816 mutex_unlock(&priv
->mutex
);
6818 IWL_DEBUG_MAC80211("leave\n");
6821 #define IWL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6)
6823 static void iwl3945_bss_info_changed(struct ieee80211_hw
*hw
,
6824 struct ieee80211_vif
*vif
,
6825 struct ieee80211_bss_conf
*bss_conf
,
6828 struct iwl3945_priv
*priv
= hw
->priv
;
6830 IWL_DEBUG_MAC80211("changes = 0x%X\n", changes
);
6832 if (changes
& BSS_CHANGED_ERP_PREAMBLE
) {
6833 IWL_DEBUG_MAC80211("ERP_PREAMBLE %d\n",
6834 bss_conf
->use_short_preamble
);
6835 if (bss_conf
->use_short_preamble
)
6836 priv
->staging_rxon
.flags
|= RXON_FLG_SHORT_PREAMBLE_MSK
;
6838 priv
->staging_rxon
.flags
&= ~RXON_FLG_SHORT_PREAMBLE_MSK
;
6841 if (changes
& BSS_CHANGED_ERP_CTS_PROT
) {
6842 IWL_DEBUG_MAC80211("ERP_CTS %d\n", bss_conf
->use_cts_prot
);
6843 if (bss_conf
->use_cts_prot
&& (priv
->band
!= IEEE80211_BAND_5GHZ
))
6844 priv
->staging_rxon
.flags
|= RXON_FLG_TGG_PROTECT_MSK
;
6846 priv
->staging_rxon
.flags
&= ~RXON_FLG_TGG_PROTECT_MSK
;
6849 if (changes
& BSS_CHANGED_ASSOC
) {
6850 IWL_DEBUG_MAC80211("ASSOC %d\n", bss_conf
->assoc
);
6851 /* This should never happen as this function should
6852 * never be called from interrupt context. */
6853 if (WARN_ON_ONCE(in_interrupt()))
6855 if (bss_conf
->assoc
) {
6856 priv
->assoc_id
= bss_conf
->aid
;
6857 priv
->beacon_int
= bss_conf
->beacon_int
;
6858 priv
->timestamp
= bss_conf
->timestamp
;
6859 priv
->assoc_capability
= bss_conf
->assoc_capability
;
6860 priv
->next_scan_jiffies
= jiffies
+
6861 IWL_DELAY_NEXT_SCAN_AFTER_ASSOC
;
6862 mutex_lock(&priv
->mutex
);
6863 iwl3945_post_associate(priv
);
6864 mutex_unlock(&priv
->mutex
);
6867 IWL_DEBUG_MAC80211("DISASSOC %d\n", bss_conf
->assoc
);
6869 } else if (changes
&& iwl3945_is_associated(priv
) && priv
->assoc_id
) {
6870 IWL_DEBUG_MAC80211("Associated Changes %d\n", changes
);
6871 iwl3945_send_rxon_assoc(priv
);
6876 static int iwl3945_mac_hw_scan(struct ieee80211_hw
*hw
, u8
*ssid
, size_t len
)
6879 unsigned long flags
;
6880 struct iwl3945_priv
*priv
= hw
->priv
;
6881 DECLARE_SSID_BUF(ssid_buf
);
6883 IWL_DEBUG_MAC80211("enter\n");
6885 mutex_lock(&priv
->mutex
);
6886 spin_lock_irqsave(&priv
->lock
, flags
);
6888 if (!iwl3945_is_ready_rf(priv
)) {
6890 IWL_DEBUG_MAC80211("leave - not ready or exit pending\n");
6894 /* we don't schedule scan within next_scan_jiffies period */
6895 if (priv
->next_scan_jiffies
&&
6896 time_after(priv
->next_scan_jiffies
, jiffies
)) {
6900 /* if we just finished scan ask for delay for a broadcast scan */
6901 if ((len
== 0) && priv
->last_scan_jiffies
&&
6902 time_after(priv
->last_scan_jiffies
+ IWL_DELAY_NEXT_SCAN
,
6908 IWL_DEBUG_SCAN("direct scan for %s [%d]\n ",
6909 print_ssid(ssid_buf
, ssid
, len
), (int)len
);
6911 priv
->one_direct_scan
= 1;
6912 priv
->direct_ssid_len
= (u8
)
6913 min((u8
) len
, (u8
) IW_ESSID_MAX_SIZE
);
6914 memcpy(priv
->direct_ssid
, ssid
, priv
->direct_ssid_len
);
6916 priv
->one_direct_scan
= 0;
6918 rc
= iwl3945_scan_initiate(priv
);
6920 IWL_DEBUG_MAC80211("leave\n");
6923 spin_unlock_irqrestore(&priv
->lock
, flags
);
6924 mutex_unlock(&priv
->mutex
);
6929 static int iwl3945_mac_set_key(struct ieee80211_hw
*hw
, enum set_key_cmd cmd
,
6930 const u8
*local_addr
, const u8
*addr
,
6931 struct ieee80211_key_conf
*key
)
6933 struct iwl3945_priv
*priv
= hw
->priv
;
6937 IWL_DEBUG_MAC80211("enter\n");
6939 if (!iwl3945_param_hwcrypto
) {
6940 IWL_DEBUG_MAC80211("leave - hwcrypto disabled\n");
6944 if (is_zero_ether_addr(addr
))
6945 /* only support pairwise keys */
6948 sta_id
= iwl3945_hw_find_station(priv
, addr
);
6949 if (sta_id
== IWL_INVALID_STATION
) {
6950 IWL_DEBUG_MAC80211("leave - %pM not in station map.\n",
6955 mutex_lock(&priv
->mutex
);
6957 iwl3945_scan_cancel_timeout(priv
, 100);
6961 rc
= iwl3945_update_sta_key_info(priv
, key
, sta_id
);
6963 iwl3945_set_rxon_hwcrypto(priv
, 1);
6964 iwl3945_commit_rxon(priv
);
6965 key
->hw_key_idx
= sta_id
;
6966 IWL_DEBUG_MAC80211("set_key success, using hwcrypto\n");
6967 key
->flags
|= IEEE80211_KEY_FLAG_GENERATE_IV
;
6971 rc
= iwl3945_clear_sta_key_info(priv
, sta_id
);
6973 iwl3945_set_rxon_hwcrypto(priv
, 0);
6974 iwl3945_commit_rxon(priv
);
6975 IWL_DEBUG_MAC80211("disable hwcrypto key\n");
6982 IWL_DEBUG_MAC80211("leave\n");
6983 mutex_unlock(&priv
->mutex
);
6988 static int iwl3945_mac_conf_tx(struct ieee80211_hw
*hw
, u16 queue
,
6989 const struct ieee80211_tx_queue_params
*params
)
6991 struct iwl3945_priv
*priv
= hw
->priv
;
6992 unsigned long flags
;
6995 IWL_DEBUG_MAC80211("enter\n");
6997 if (!iwl3945_is_ready_rf(priv
)) {
6998 IWL_DEBUG_MAC80211("leave - RF not ready\n");
7002 if (queue
>= AC_NUM
) {
7003 IWL_DEBUG_MAC80211("leave - queue >= AC_NUM %d\n", queue
);
7007 q
= AC_NUM
- 1 - queue
;
7009 spin_lock_irqsave(&priv
->lock
, flags
);
7011 priv
->qos_data
.def_qos_parm
.ac
[q
].cw_min
= cpu_to_le16(params
->cw_min
);
7012 priv
->qos_data
.def_qos_parm
.ac
[q
].cw_max
= cpu_to_le16(params
->cw_max
);
7013 priv
->qos_data
.def_qos_parm
.ac
[q
].aifsn
= params
->aifs
;
7014 priv
->qos_data
.def_qos_parm
.ac
[q
].edca_txop
=
7015 cpu_to_le16((params
->txop
* 32));
7017 priv
->qos_data
.def_qos_parm
.ac
[q
].reserved1
= 0;
7018 priv
->qos_data
.qos_active
= 1;
7020 spin_unlock_irqrestore(&priv
->lock
, flags
);
7022 mutex_lock(&priv
->mutex
);
7023 if (priv
->iw_mode
== NL80211_IFTYPE_AP
)
7024 iwl3945_activate_qos(priv
, 1);
7025 else if (priv
->assoc_id
&& iwl3945_is_associated(priv
))
7026 iwl3945_activate_qos(priv
, 0);
7028 mutex_unlock(&priv
->mutex
);
7030 IWL_DEBUG_MAC80211("leave\n");
7034 static int iwl3945_mac_get_tx_stats(struct ieee80211_hw
*hw
,
7035 struct ieee80211_tx_queue_stats
*stats
)
7037 struct iwl3945_priv
*priv
= hw
->priv
;
7039 struct iwl3945_tx_queue
*txq
;
7040 struct iwl_queue
*q
;
7041 unsigned long flags
;
7043 IWL_DEBUG_MAC80211("enter\n");
7045 if (!iwl3945_is_ready_rf(priv
)) {
7046 IWL_DEBUG_MAC80211("leave - RF not ready\n");
7050 spin_lock_irqsave(&priv
->lock
, flags
);
7052 for (i
= 0; i
< AC_NUM
; i
++) {
7053 txq
= &priv
->txq
[i
];
7055 avail
= iwl_queue_space(q
);
7057 stats
[i
].len
= q
->n_window
- avail
;
7058 stats
[i
].limit
= q
->n_window
- q
->high_mark
;
7059 stats
[i
].count
= q
->n_window
;
7062 spin_unlock_irqrestore(&priv
->lock
, flags
);
7064 IWL_DEBUG_MAC80211("leave\n");
7069 static void iwl3945_mac_reset_tsf(struct ieee80211_hw
*hw
)
7071 struct iwl3945_priv
*priv
= hw
->priv
;
7072 unsigned long flags
;
7074 mutex_lock(&priv
->mutex
);
7075 IWL_DEBUG_MAC80211("enter\n");
7077 iwl3945_reset_qos(priv
);
7079 spin_lock_irqsave(&priv
->lock
, flags
);
7081 priv
->assoc_capability
= 0;
7082 priv
->call_post_assoc_from_beacon
= 0;
7084 /* new association get rid of ibss beacon skb */
7085 if (priv
->ibss_beacon
)
7086 dev_kfree_skb(priv
->ibss_beacon
);
7088 priv
->ibss_beacon
= NULL
;
7090 priv
->beacon_int
= priv
->hw
->conf
.beacon_int
;
7091 priv
->timestamp
= 0;
7092 if ((priv
->iw_mode
== NL80211_IFTYPE_STATION
))
7093 priv
->beacon_int
= 0;
7095 spin_unlock_irqrestore(&priv
->lock
, flags
);
7097 if (!iwl3945_is_ready_rf(priv
)) {
7098 IWL_DEBUG_MAC80211("leave - not ready\n");
7099 mutex_unlock(&priv
->mutex
);
7103 /* we are restarting association process
7104 * clear RXON_FILTER_ASSOC_MSK bit
7106 if (priv
->iw_mode
!= NL80211_IFTYPE_AP
) {
7107 iwl3945_scan_cancel_timeout(priv
, 100);
7108 priv
->staging_rxon
.filter_flags
&= ~RXON_FILTER_ASSOC_MSK
;
7109 iwl3945_commit_rxon(priv
);
7112 /* Per mac80211.h: This is only used in IBSS mode... */
7113 if (priv
->iw_mode
!= NL80211_IFTYPE_ADHOC
) {
7115 IWL_DEBUG_MAC80211("leave - not in IBSS\n");
7116 mutex_unlock(&priv
->mutex
);
7120 iwl3945_set_rate(priv
);
7122 mutex_unlock(&priv
->mutex
);
7124 IWL_DEBUG_MAC80211("leave\n");
7128 static int iwl3945_mac_beacon_update(struct ieee80211_hw
*hw
, struct sk_buff
*skb
)
7130 struct iwl3945_priv
*priv
= hw
->priv
;
7131 unsigned long flags
;
7133 IWL_DEBUG_MAC80211("enter\n");
7135 if (!iwl3945_is_ready_rf(priv
)) {
7136 IWL_DEBUG_MAC80211("leave - RF not ready\n");
7140 if (priv
->iw_mode
!= NL80211_IFTYPE_ADHOC
) {
7141 IWL_DEBUG_MAC80211("leave - not IBSS\n");
7145 spin_lock_irqsave(&priv
->lock
, flags
);
7147 if (priv
->ibss_beacon
)
7148 dev_kfree_skb(priv
->ibss_beacon
);
7150 priv
->ibss_beacon
= skb
;
7154 IWL_DEBUG_MAC80211("leave\n");
7155 spin_unlock_irqrestore(&priv
->lock
, flags
);
7157 iwl3945_reset_qos(priv
);
7159 iwl3945_post_associate(priv
);
7165 /*****************************************************************************
7169 *****************************************************************************/
7171 #ifdef CONFIG_IWL3945_DEBUG
7174 * The following adds a new attribute to the sysfs representation
7175 * of this device driver (i.e. a new file in /sys/bus/pci/drivers/iwl/)
7176 * used for controlling the debug level.
7178 * See the level definitions in iwl for details.
7180 static ssize_t
show_debug_level(struct device
*d
,
7181 struct device_attribute
*attr
, char *buf
)
7183 struct iwl3945_priv
*priv
= d
->driver_data
;
7185 return sprintf(buf
, "0x%08X\n", priv
->debug_level
);
7187 static ssize_t
store_debug_level(struct device
*d
,
7188 struct device_attribute
*attr
,
7189 const char *buf
, size_t count
)
7191 struct iwl3945_priv
*priv
= d
->driver_data
;
7195 ret
= strict_strtoul(buf
, 0, &val
);
7197 printk(KERN_INFO DRV_NAME
7198 ": %s is not in hex or decimal form.\n", buf
);
7200 priv
->debug_level
= val
;
7202 return strnlen(buf
, count
);
7205 static DEVICE_ATTR(debug_level
, S_IWUSR
| S_IRUGO
,
7206 show_debug_level
, store_debug_level
);
7208 #endif /* CONFIG_IWL3945_DEBUG */
7210 static ssize_t
show_temperature(struct device
*d
,
7211 struct device_attribute
*attr
, char *buf
)
7213 struct iwl3945_priv
*priv
= (struct iwl3945_priv
*)d
->driver_data
;
7215 if (!iwl3945_is_alive(priv
))
7218 return sprintf(buf
, "%d\n", iwl3945_hw_get_temperature(priv
));
7221 static DEVICE_ATTR(temperature
, S_IRUGO
, show_temperature
, NULL
);
7223 static ssize_t
show_tx_power(struct device
*d
,
7224 struct device_attribute
*attr
, char *buf
)
7226 struct iwl3945_priv
*priv
= (struct iwl3945_priv
*)d
->driver_data
;
7227 return sprintf(buf
, "%d\n", priv
->user_txpower_limit
);
7230 static ssize_t
store_tx_power(struct device
*d
,
7231 struct device_attribute
*attr
,
7232 const char *buf
, size_t count
)
7234 struct iwl3945_priv
*priv
= (struct iwl3945_priv
*)d
->driver_data
;
7235 char *p
= (char *)buf
;
7238 val
= simple_strtoul(p
, &p
, 10);
7240 printk(KERN_INFO DRV_NAME
7241 ": %s is not in decimal form.\n", buf
);
7243 iwl3945_hw_reg_set_txpower(priv
, val
);
7248 static DEVICE_ATTR(tx_power
, S_IWUSR
| S_IRUGO
, show_tx_power
, store_tx_power
);
7250 static ssize_t
show_flags(struct device
*d
,
7251 struct device_attribute
*attr
, char *buf
)
7253 struct iwl3945_priv
*priv
= (struct iwl3945_priv
*)d
->driver_data
;
7255 return sprintf(buf
, "0x%04X\n", priv
->active_rxon
.flags
);
7258 static ssize_t
store_flags(struct device
*d
,
7259 struct device_attribute
*attr
,
7260 const char *buf
, size_t count
)
7262 struct iwl3945_priv
*priv
= (struct iwl3945_priv
*)d
->driver_data
;
7263 u32 flags
= simple_strtoul(buf
, NULL
, 0);
7265 mutex_lock(&priv
->mutex
);
7266 if (le32_to_cpu(priv
->staging_rxon
.flags
) != flags
) {
7267 /* Cancel any currently running scans... */
7268 if (iwl3945_scan_cancel_timeout(priv
, 100))
7269 IWL_WARNING("Could not cancel scan.\n");
7271 IWL_DEBUG_INFO("Committing rxon.flags = 0x%04X\n",
7273 priv
->staging_rxon
.flags
= cpu_to_le32(flags
);
7274 iwl3945_commit_rxon(priv
);
7277 mutex_unlock(&priv
->mutex
);
7282 static DEVICE_ATTR(flags
, S_IWUSR
| S_IRUGO
, show_flags
, store_flags
);
7284 static ssize_t
show_filter_flags(struct device
*d
,
7285 struct device_attribute
*attr
, char *buf
)
7287 struct iwl3945_priv
*priv
= (struct iwl3945_priv
*)d
->driver_data
;
7289 return sprintf(buf
, "0x%04X\n",
7290 le32_to_cpu(priv
->active_rxon
.filter_flags
));
7293 static ssize_t
store_filter_flags(struct device
*d
,
7294 struct device_attribute
*attr
,
7295 const char *buf
, size_t count
)
7297 struct iwl3945_priv
*priv
= (struct iwl3945_priv
*)d
->driver_data
;
7298 u32 filter_flags
= simple_strtoul(buf
, NULL
, 0);
7300 mutex_lock(&priv
->mutex
);
7301 if (le32_to_cpu(priv
->staging_rxon
.filter_flags
) != filter_flags
) {
7302 /* Cancel any currently running scans... */
7303 if (iwl3945_scan_cancel_timeout(priv
, 100))
7304 IWL_WARNING("Could not cancel scan.\n");
7306 IWL_DEBUG_INFO("Committing rxon.filter_flags = "
7307 "0x%04X\n", filter_flags
);
7308 priv
->staging_rxon
.filter_flags
=
7309 cpu_to_le32(filter_flags
);
7310 iwl3945_commit_rxon(priv
);
7313 mutex_unlock(&priv
->mutex
);
7318 static DEVICE_ATTR(filter_flags
, S_IWUSR
| S_IRUGO
, show_filter_flags
,
7319 store_filter_flags
);
7321 #ifdef CONFIG_IWL3945_SPECTRUM_MEASUREMENT
7323 static ssize_t
show_measurement(struct device
*d
,
7324 struct device_attribute
*attr
, char *buf
)
7326 struct iwl3945_priv
*priv
= dev_get_drvdata(d
);
7327 struct iwl_spectrum_notification measure_report
;
7328 u32 size
= sizeof(measure_report
), len
= 0, ofs
= 0;
7329 u8
*data
= (u8
*)&measure_report
;
7330 unsigned long flags
;
7332 spin_lock_irqsave(&priv
->lock
, flags
);
7333 if (!(priv
->measurement_status
& MEASUREMENT_READY
)) {
7334 spin_unlock_irqrestore(&priv
->lock
, flags
);
7337 memcpy(&measure_report
, &priv
->measure_report
, size
);
7338 priv
->measurement_status
= 0;
7339 spin_unlock_irqrestore(&priv
->lock
, flags
);
7341 while (size
&& (PAGE_SIZE
- len
)) {
7342 hex_dump_to_buffer(data
+ ofs
, size
, 16, 1, buf
+ len
,
7343 PAGE_SIZE
- len
, 1);
7345 if (PAGE_SIZE
- len
)
7349 size
-= min(size
, 16U);
7355 static ssize_t
store_measurement(struct device
*d
,
7356 struct device_attribute
*attr
,
7357 const char *buf
, size_t count
)
7359 struct iwl3945_priv
*priv
= dev_get_drvdata(d
);
7360 struct ieee80211_measurement_params params
= {
7361 .channel
= le16_to_cpu(priv
->active_rxon
.channel
),
7362 .start_time
= cpu_to_le64(priv
->last_tsf
),
7363 .duration
= cpu_to_le16(1),
7365 u8 type
= IWL_MEASURE_BASIC
;
7371 strncpy(buffer
, buf
, min(sizeof(buffer
), count
));
7372 channel
= simple_strtoul(p
, NULL
, 0);
7374 params
.channel
= channel
;
7377 while (*p
&& *p
!= ' ')
7380 type
= simple_strtoul(p
+ 1, NULL
, 0);
7383 IWL_DEBUG_INFO("Invoking measurement of type %d on "
7384 "channel %d (for '%s')\n", type
, params
.channel
, buf
);
7385 iwl3945_get_measurement(priv
, ¶ms
, type
);
7390 static DEVICE_ATTR(measurement
, S_IRUSR
| S_IWUSR
,
7391 show_measurement
, store_measurement
);
7392 #endif /* CONFIG_IWL3945_SPECTRUM_MEASUREMENT */
7394 static ssize_t
store_retry_rate(struct device
*d
,
7395 struct device_attribute
*attr
,
7396 const char *buf
, size_t count
)
7398 struct iwl3945_priv
*priv
= dev_get_drvdata(d
);
7400 priv
->retry_rate
= simple_strtoul(buf
, NULL
, 0);
7401 if (priv
->retry_rate
<= 0)
7402 priv
->retry_rate
= 1;
7407 static ssize_t
show_retry_rate(struct device
*d
,
7408 struct device_attribute
*attr
, char *buf
)
7410 struct iwl3945_priv
*priv
= dev_get_drvdata(d
);
7411 return sprintf(buf
, "%d", priv
->retry_rate
);
7414 static DEVICE_ATTR(retry_rate
, S_IWUSR
| S_IRUSR
, show_retry_rate
,
7417 static ssize_t
store_power_level(struct device
*d
,
7418 struct device_attribute
*attr
,
7419 const char *buf
, size_t count
)
7421 struct iwl3945_priv
*priv
= dev_get_drvdata(d
);
7425 mode
= simple_strtoul(buf
, NULL
, 0);
7426 mutex_lock(&priv
->mutex
);
7428 if (!iwl3945_is_ready(priv
)) {
7433 if ((mode
< 1) || (mode
> IWL39_POWER_LIMIT
) ||
7434 (mode
== IWL39_POWER_AC
))
7435 mode
= IWL39_POWER_AC
;
7437 mode
|= IWL_POWER_ENABLED
;
7439 if (mode
!= priv
->power_mode
) {
7440 rc
= iwl3945_send_power_mode(priv
, IWL_POWER_LEVEL(mode
));
7442 IWL_DEBUG_MAC80211("failed setting power mode.\n");
7445 priv
->power_mode
= mode
;
7451 mutex_unlock(&priv
->mutex
);
7455 #define MAX_WX_STRING 80
7457 /* Values are in microsecond */
7458 static const s32 timeout_duration
[] = {
7465 static const s32 period_duration
[] = {
7473 static ssize_t
show_power_level(struct device
*d
,
7474 struct device_attribute
*attr
, char *buf
)
7476 struct iwl3945_priv
*priv
= dev_get_drvdata(d
);
7477 int level
= IWL_POWER_LEVEL(priv
->power_mode
);
7480 p
+= sprintf(p
, "%d ", level
);
7482 case IWL_POWER_MODE_CAM
:
7483 case IWL39_POWER_AC
:
7484 p
+= sprintf(p
, "(AC)");
7486 case IWL39_POWER_BATTERY
:
7487 p
+= sprintf(p
, "(BATTERY)");
7491 "(Timeout %dms, Period %dms)",
7492 timeout_duration
[level
- 1] / 1000,
7493 period_duration
[level
- 1] / 1000);
7496 if (!(priv
->power_mode
& IWL_POWER_ENABLED
))
7497 p
+= sprintf(p
, " OFF\n");
7499 p
+= sprintf(p
, " \n");
7505 static DEVICE_ATTR(power_level
, S_IWUSR
| S_IRUSR
, show_power_level
,
7508 static ssize_t
show_channels(struct device
*d
,
7509 struct device_attribute
*attr
, char *buf
)
7511 /* all this shit doesn't belong into sysfs anyway */
7515 static DEVICE_ATTR(channels
, S_IRUSR
, show_channels
, NULL
);
7517 static ssize_t
show_statistics(struct device
*d
,
7518 struct device_attribute
*attr
, char *buf
)
7520 struct iwl3945_priv
*priv
= dev_get_drvdata(d
);
7521 u32 size
= sizeof(struct iwl3945_notif_statistics
);
7522 u32 len
= 0, ofs
= 0;
7523 u8
*data
= (u8
*)&priv
->statistics
;
7526 if (!iwl3945_is_alive(priv
))
7529 mutex_lock(&priv
->mutex
);
7530 rc
= iwl3945_send_statistics_request(priv
);
7531 mutex_unlock(&priv
->mutex
);
7535 "Error sending statistics request: 0x%08X\n", rc
);
7539 while (size
&& (PAGE_SIZE
- len
)) {
7540 hex_dump_to_buffer(data
+ ofs
, size
, 16, 1, buf
+ len
,
7541 PAGE_SIZE
- len
, 1);
7543 if (PAGE_SIZE
- len
)
7547 size
-= min(size
, 16U);
7553 static DEVICE_ATTR(statistics
, S_IRUGO
, show_statistics
, NULL
);
7555 static ssize_t
show_antenna(struct device
*d
,
7556 struct device_attribute
*attr
, char *buf
)
7558 struct iwl3945_priv
*priv
= dev_get_drvdata(d
);
7560 if (!iwl3945_is_alive(priv
))
7563 return sprintf(buf
, "%d\n", priv
->antenna
);
7566 static ssize_t
store_antenna(struct device
*d
,
7567 struct device_attribute
*attr
,
7568 const char *buf
, size_t count
)
7571 struct iwl3945_priv
*priv
= dev_get_drvdata(d
);
7576 if (sscanf(buf
, "%1i", &ant
) != 1) {
7577 IWL_DEBUG_INFO("not in hex or decimal form.\n");
7581 if ((ant
>= 0) && (ant
<= 2)) {
7582 IWL_DEBUG_INFO("Setting antenna select to %d.\n", ant
);
7583 priv
->antenna
= (enum iwl3945_antenna
)ant
;
7585 IWL_DEBUG_INFO("Bad antenna select value %d.\n", ant
);
7591 static DEVICE_ATTR(antenna
, S_IWUSR
| S_IRUGO
, show_antenna
, store_antenna
);
7593 static ssize_t
show_status(struct device
*d
,
7594 struct device_attribute
*attr
, char *buf
)
7596 struct iwl3945_priv
*priv
= (struct iwl3945_priv
*)d
->driver_data
;
7597 if (!iwl3945_is_alive(priv
))
7599 return sprintf(buf
, "0x%08x\n", (int)priv
->status
);
7602 static DEVICE_ATTR(status
, S_IRUGO
, show_status
, NULL
);
7604 static ssize_t
dump_error_log(struct device
*d
,
7605 struct device_attribute
*attr
,
7606 const char *buf
, size_t count
)
7608 char *p
= (char *)buf
;
7611 iwl3945_dump_nic_error_log((struct iwl3945_priv
*)d
->driver_data
);
7613 return strnlen(buf
, count
);
7616 static DEVICE_ATTR(dump_errors
, S_IWUSR
, NULL
, dump_error_log
);
7618 static ssize_t
dump_event_log(struct device
*d
,
7619 struct device_attribute
*attr
,
7620 const char *buf
, size_t count
)
7622 char *p
= (char *)buf
;
7625 iwl3945_dump_nic_event_log((struct iwl3945_priv
*)d
->driver_data
);
7627 return strnlen(buf
, count
);
7630 static DEVICE_ATTR(dump_events
, S_IWUSR
, NULL
, dump_event_log
);
7632 /*****************************************************************************
7634 * driver setup and tear down
7636 *****************************************************************************/
7638 static void iwl3945_setup_deferred_work(struct iwl3945_priv
*priv
)
7640 priv
->workqueue
= create_workqueue(DRV_NAME
);
7642 init_waitqueue_head(&priv
->wait_command_queue
);
7644 INIT_WORK(&priv
->up
, iwl3945_bg_up
);
7645 INIT_WORK(&priv
->restart
, iwl3945_bg_restart
);
7646 INIT_WORK(&priv
->rx_replenish
, iwl3945_bg_rx_replenish
);
7647 INIT_WORK(&priv
->scan_completed
, iwl3945_bg_scan_completed
);
7648 INIT_WORK(&priv
->request_scan
, iwl3945_bg_request_scan
);
7649 INIT_WORK(&priv
->abort_scan
, iwl3945_bg_abort_scan
);
7650 INIT_WORK(&priv
->rf_kill
, iwl3945_bg_rf_kill
);
7651 INIT_WORK(&priv
->beacon_update
, iwl3945_bg_beacon_update
);
7652 INIT_DELAYED_WORK(&priv
->init_alive_start
, iwl3945_bg_init_alive_start
);
7653 INIT_DELAYED_WORK(&priv
->alive_start
, iwl3945_bg_alive_start
);
7654 INIT_DELAYED_WORK(&priv
->scan_check
, iwl3945_bg_scan_check
);
7656 iwl3945_hw_setup_deferred_work(priv
);
7658 tasklet_init(&priv
->irq_tasklet
, (void (*)(unsigned long))
7659 iwl3945_irq_tasklet
, (unsigned long)priv
);
7662 static void iwl3945_cancel_deferred_work(struct iwl3945_priv
*priv
)
7664 iwl3945_hw_cancel_deferred_work(priv
);
7666 cancel_delayed_work_sync(&priv
->init_alive_start
);
7667 cancel_delayed_work(&priv
->scan_check
);
7668 cancel_delayed_work(&priv
->alive_start
);
7669 cancel_work_sync(&priv
->beacon_update
);
7672 static struct attribute
*iwl3945_sysfs_entries
[] = {
7673 &dev_attr_antenna
.attr
,
7674 &dev_attr_channels
.attr
,
7675 &dev_attr_dump_errors
.attr
,
7676 &dev_attr_dump_events
.attr
,
7677 &dev_attr_flags
.attr
,
7678 &dev_attr_filter_flags
.attr
,
7679 #ifdef CONFIG_IWL3945_SPECTRUM_MEASUREMENT
7680 &dev_attr_measurement
.attr
,
7682 &dev_attr_power_level
.attr
,
7683 &dev_attr_retry_rate
.attr
,
7684 &dev_attr_statistics
.attr
,
7685 &dev_attr_status
.attr
,
7686 &dev_attr_temperature
.attr
,
7687 &dev_attr_tx_power
.attr
,
7688 #ifdef CONFIG_IWL3945_DEBUG
7689 &dev_attr_debug_level
.attr
,
7694 static struct attribute_group iwl3945_attribute_group
= {
7695 .name
= NULL
, /* put in device directory */
7696 .attrs
= iwl3945_sysfs_entries
,
7699 static struct ieee80211_ops iwl3945_hw_ops
= {
7700 .tx
= iwl3945_mac_tx
,
7701 .start
= iwl3945_mac_start
,
7702 .stop
= iwl3945_mac_stop
,
7703 .add_interface
= iwl3945_mac_add_interface
,
7704 .remove_interface
= iwl3945_mac_remove_interface
,
7705 .config
= iwl3945_mac_config
,
7706 .config_interface
= iwl3945_mac_config_interface
,
7707 .configure_filter
= iwl3945_configure_filter
,
7708 .set_key
= iwl3945_mac_set_key
,
7709 .get_tx_stats
= iwl3945_mac_get_tx_stats
,
7710 .conf_tx
= iwl3945_mac_conf_tx
,
7711 .reset_tsf
= iwl3945_mac_reset_tsf
,
7712 .bss_info_changed
= iwl3945_bss_info_changed
,
7713 .hw_scan
= iwl3945_mac_hw_scan
7716 static int iwl3945_pci_probe(struct pci_dev
*pdev
, const struct pci_device_id
*ent
)
7719 struct iwl3945_priv
*priv
;
7720 struct ieee80211_hw
*hw
;
7721 struct iwl_3945_cfg
*cfg
= (struct iwl_3945_cfg
*)(ent
->driver_data
);
7722 unsigned long flags
;
7724 /***********************
7725 * 1. Allocating HW data
7726 * ********************/
7728 /* mac80211 allocates memory for this device instance, including
7729 * space for this driver's private structure */
7730 hw
= ieee80211_alloc_hw(sizeof(struct iwl3945_priv
), &iwl3945_hw_ops
);
7732 printk(KERN_ERR DRV_NAME
"Can not allocate network device\n");
7737 SET_IEEE80211_DEV(hw
, &pdev
->dev
);
7741 priv
->pci_dev
= pdev
;
7744 if ((iwl3945_param_queues_num
> IWL39_MAX_NUM_QUEUES
) ||
7745 (iwl3945_param_queues_num
< IWL_MIN_NUM_QUEUES
)) {
7746 IWL_ERROR("invalid queues_num, should be between %d and %d\n",
7747 IWL_MIN_NUM_QUEUES
, IWL39_MAX_NUM_QUEUES
);
7752 /* Disabling hardware scan means that mac80211 will perform scans
7753 * "the hard way", rather than using device's scan. */
7754 if (iwl3945_param_disable_hw_scan
) {
7755 IWL_DEBUG_INFO("Disabling hw_scan\n");
7756 iwl3945_hw_ops
.hw_scan
= NULL
;
7759 IWL_DEBUG_INFO("*** LOAD DRIVER ***\n");
7760 hw
->rate_control_algorithm
= "iwl-3945-rs";
7761 hw
->sta_data_size
= sizeof(struct iwl3945_sta_priv
);
7763 /* Select antenna (may be helpful if only one antenna is connected) */
7764 priv
->antenna
= (enum iwl3945_antenna
)iwl3945_param_antenna
;
7765 #ifdef CONFIG_IWL3945_DEBUG
7766 priv
->debug_level
= iwl3945_param_debug
;
7767 atomic_set(&priv
->restrict_refcnt
, 0);
7770 /* Tell mac80211 our characteristics */
7771 hw
->flags
= IEEE80211_HW_SIGNAL_DBM
|
7772 IEEE80211_HW_NOISE_DBM
;
7774 hw
->wiphy
->interface_modes
=
7775 BIT(NL80211_IFTYPE_STATION
) |
7776 BIT(NL80211_IFTYPE_ADHOC
);
7778 hw
->wiphy
->fw_handles_regulatory
= true;
7780 /* 4 EDCA QOS priorities */
7783 /***************************
7784 * 2. Initializing PCI bus
7785 * *************************/
7786 if (pci_enable_device(pdev
)) {
7788 goto out_ieee80211_free_hw
;
7791 pci_set_master(pdev
);
7793 err
= pci_set_dma_mask(pdev
, DMA_32BIT_MASK
);
7795 err
= pci_set_consistent_dma_mask(pdev
, DMA_32BIT_MASK
);
7797 printk(KERN_WARNING DRV_NAME
": No suitable DMA available.\n");
7798 goto out_pci_disable_device
;
7801 pci_set_drvdata(pdev
, priv
);
7802 err
= pci_request_regions(pdev
, DRV_NAME
);
7804 goto out_pci_disable_device
;
7806 /***********************
7807 * 3. Read REV Register
7808 * ********************/
7809 priv
->hw_base
= pci_iomap(pdev
, 0, 0);
7810 if (!priv
->hw_base
) {
7812 goto out_pci_release_regions
;
7815 IWL_DEBUG_INFO("pci_resource_len = 0x%08llx\n",
7816 (unsigned long long) pci_resource_len(pdev
, 0));
7817 IWL_DEBUG_INFO("pci_resource_base = %p\n", priv
->hw_base
);
7819 /* We disable the RETRY_TIMEOUT register (0x41) to keep
7820 * PCI Tx retries from interfering with C3 CPU state */
7821 pci_write_config_byte(pdev
, 0x41, 0x00);
7824 iwl3945_set_bit(priv
, CSR_GIO_CHICKEN_BITS
,
7825 CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER
);
7827 iwl3945_set_bit(priv
, CSR_GP_CNTRL
, CSR_GP_CNTRL_REG_FLAG_INIT_DONE
);
7828 err
= iwl3945_poll_direct_bit(priv
, CSR_GP_CNTRL
,
7829 CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY
, 25000);
7831 IWL_DEBUG_INFO("Failed to init the card\n");
7832 goto out_remove_sysfs
;
7835 /***********************
7837 * ********************/
7838 /* Read the EEPROM */
7839 err
= iwl3945_eeprom_init(priv
);
7841 IWL_ERROR("Unable to init EEPROM\n");
7842 goto out_remove_sysfs
;
7844 /* MAC Address location in EEPROM same for 3945/4965 */
7845 get_eeprom_mac(priv
, priv
->mac_addr
);
7846 IWL_DEBUG_INFO("MAC address: %pM\n", priv
->mac_addr
);
7847 SET_IEEE80211_PERM_ADDR(priv
->hw
, priv
->mac_addr
);
7849 /***********************
7850 * 5. Setup HW Constants
7851 * ********************/
7852 /* Device-specific setup */
7853 if (iwl3945_hw_set_hw_setting(priv
)) {
7854 IWL_ERROR("failed to set hw settings\n");
7858 /***********************
7860 * ********************/
7861 priv
->retry_rate
= 1;
7862 priv
->ibss_beacon
= NULL
;
7864 spin_lock_init(&priv
->lock
);
7865 spin_lock_init(&priv
->power_data
.lock
);
7866 spin_lock_init(&priv
->sta_lock
);
7867 spin_lock_init(&priv
->hcmd_lock
);
7869 INIT_LIST_HEAD(&priv
->free_frames
);
7870 mutex_init(&priv
->mutex
);
7872 /* Clear the driver's (not device's) station table */
7873 iwl3945_clear_stations_table(priv
);
7875 priv
->data_retry_limit
= -1;
7876 priv
->ieee_channels
= NULL
;
7877 priv
->ieee_rates
= NULL
;
7878 priv
->band
= IEEE80211_BAND_2GHZ
;
7880 priv
->iw_mode
= NL80211_IFTYPE_STATION
;
7882 iwl3945_reset_qos(priv
);
7884 priv
->qos_data
.qos_active
= 0;
7885 priv
->qos_data
.qos_cap
.val
= 0;
7888 priv
->rates_mask
= IWL_RATES_MASK
;
7889 /* If power management is turned on, default to AC mode */
7890 priv
->power_mode
= IWL39_POWER_AC
;
7891 priv
->user_txpower_limit
= IWL_DEFAULT_TX_POWER
;
7893 err
= iwl3945_init_channel_map(priv
);
7895 IWL_ERROR("initializing regulatory failed: %d\n", err
);
7896 goto out_release_irq
;
7899 err
= iwl3945_init_geos(priv
);
7901 IWL_ERROR("initializing geos failed: %d\n", err
);
7902 goto out_free_channel_map
;
7905 printk(KERN_INFO DRV_NAME
7906 ": Detected Intel Wireless WiFi Link %s\n", priv
->cfg
->name
);
7908 /***********************************
7909 * 7. Initialize Module Parameters
7910 * **********************************/
7912 /* Initialize module parameter values here */
7913 /* Disable radio (SW RF KILL) via parameter when loading driver */
7914 if (iwl3945_param_disable
) {
7915 set_bit(STATUS_RF_KILL_SW
, &priv
->status
);
7916 IWL_DEBUG_INFO("Radio disabled.\n");
7920 /***********************
7922 * ********************/
7924 spin_lock_irqsave(&priv
->lock
, flags
);
7925 iwl3945_disable_interrupts(priv
);
7926 spin_unlock_irqrestore(&priv
->lock
, flags
);
7928 err
= sysfs_create_group(&pdev
->dev
.kobj
, &iwl3945_attribute_group
);
7930 IWL_ERROR("failed to create sysfs device attributes\n");
7934 iwl3945_set_rxon_channel(priv
, IEEE80211_BAND_2GHZ
, 6);
7935 iwl3945_setup_deferred_work(priv
);
7936 iwl3945_setup_rx_handlers(priv
);
7938 /***********************
7940 * ********************/
7941 pci_save_state(pdev
);
7942 pci_disable_device(pdev
);
7944 /*********************************
7945 * 10. Setup and Register mac80211
7946 * *******************************/
7948 err
= ieee80211_register_hw(priv
->hw
);
7950 IWL_ERROR("Failed to register network device (error %d)\n", err
);
7951 goto out_remove_sysfs
;
7954 priv
->hw
->conf
.beacon_int
= 100;
7955 priv
->mac80211_registered
= 1;
7958 err
= iwl3945_rfkill_init(priv
);
7960 IWL_ERROR("Unable to initialize RFKILL system. "
7961 "Ignoring error: %d\n", err
);
7966 sysfs_remove_group(&pdev
->dev
.kobj
, &iwl3945_attribute_group
);
7968 iwl3945_free_geos(priv
);
7969 out_free_channel_map
:
7970 iwl3945_free_channel_map(priv
);
7974 destroy_workqueue(priv
->workqueue
);
7975 priv
->workqueue
= NULL
;
7976 iwl3945_unset_hw_setting(priv
);
7979 pci_iounmap(pdev
, priv
->hw_base
);
7980 out_pci_release_regions
:
7981 pci_release_regions(pdev
);
7982 out_pci_disable_device
:
7983 pci_disable_device(pdev
);
7984 pci_set_drvdata(pdev
, NULL
);
7985 out_ieee80211_free_hw
:
7986 ieee80211_free_hw(priv
->hw
);
7991 static void __devexit
iwl3945_pci_remove(struct pci_dev
*pdev
)
7993 struct iwl3945_priv
*priv
= pci_get_drvdata(pdev
);
7994 unsigned long flags
;
7999 IWL_DEBUG_INFO("*** UNLOAD DRIVER ***\n");
8001 set_bit(STATUS_EXIT_PENDING
, &priv
->status
);
8005 /* make sure we flush any pending irq or
8006 * tasklet for the driver
8008 spin_lock_irqsave(&priv
->lock
, flags
);
8009 iwl3945_disable_interrupts(priv
);
8010 spin_unlock_irqrestore(&priv
->lock
, flags
);
8012 iwl_synchronize_irq(priv
);
8014 sysfs_remove_group(&pdev
->dev
.kobj
, &iwl3945_attribute_group
);
8016 iwl3945_rfkill_unregister(priv
);
8017 iwl3945_dealloc_ucode_pci(priv
);
8020 iwl3945_rx_queue_free(priv
, &priv
->rxq
);
8021 iwl3945_hw_txq_ctx_free(priv
);
8023 iwl3945_unset_hw_setting(priv
);
8024 iwl3945_clear_stations_table(priv
);
8026 if (priv
->mac80211_registered
)
8027 ieee80211_unregister_hw(priv
->hw
);
8029 /*netif_stop_queue(dev); */
8030 flush_workqueue(priv
->workqueue
);
8032 /* ieee80211_unregister_hw calls iwl3945_mac_stop, which flushes
8033 * priv->workqueue... so we can't take down the workqueue
8035 destroy_workqueue(priv
->workqueue
);
8036 priv
->workqueue
= NULL
;
8038 pci_iounmap(pdev
, priv
->hw_base
);
8039 pci_release_regions(pdev
);
8040 pci_disable_device(pdev
);
8041 pci_set_drvdata(pdev
, NULL
);
8043 iwl3945_free_channel_map(priv
);
8044 iwl3945_free_geos(priv
);
8046 if (priv
->ibss_beacon
)
8047 dev_kfree_skb(priv
->ibss_beacon
);
8049 ieee80211_free_hw(priv
->hw
);
8054 static int iwl3945_pci_suspend(struct pci_dev
*pdev
, pm_message_t state
)
8056 struct iwl3945_priv
*priv
= pci_get_drvdata(pdev
);
8058 if (priv
->is_open
) {
8059 set_bit(STATUS_IN_SUSPEND
, &priv
->status
);
8060 iwl3945_mac_stop(priv
->hw
);
8064 pci_set_power_state(pdev
, PCI_D3hot
);
8069 static int iwl3945_pci_resume(struct pci_dev
*pdev
)
8071 struct iwl3945_priv
*priv
= pci_get_drvdata(pdev
);
8073 pci_set_power_state(pdev
, PCI_D0
);
8076 iwl3945_mac_start(priv
->hw
);
8078 clear_bit(STATUS_IN_SUSPEND
, &priv
->status
);
8082 #endif /* CONFIG_PM */
8084 /*************** RFKILL FUNCTIONS **********/
8085 #ifdef CONFIG_IWL3945_RFKILL
8086 /* software rf-kill from user */
8087 static int iwl3945_rfkill_soft_rf_kill(void *data
, enum rfkill_state state
)
8089 struct iwl3945_priv
*priv
= data
;
8095 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
8098 IWL_DEBUG_RF_KILL("we received soft RFKILL set to state %d\n", state
);
8099 mutex_lock(&priv
->mutex
);
8102 case RFKILL_STATE_UNBLOCKED
:
8103 if (iwl3945_is_rfkill_hw(priv
)) {
8107 iwl3945_radio_kill_sw(priv
, 0);
8109 case RFKILL_STATE_SOFT_BLOCKED
:
8110 iwl3945_radio_kill_sw(priv
, 1);
8113 IWL_WARNING("we received unexpected RFKILL state %d\n", state
);
8117 mutex_unlock(&priv
->mutex
);
8122 int iwl3945_rfkill_init(struct iwl3945_priv
*priv
)
8124 struct device
*device
= wiphy_dev(priv
->hw
->wiphy
);
8127 BUG_ON(device
== NULL
);
8129 IWL_DEBUG_RF_KILL("Initializing RFKILL.\n");
8130 priv
->rfkill
= rfkill_allocate(device
, RFKILL_TYPE_WLAN
);
8131 if (!priv
->rfkill
) {
8132 IWL_ERROR("Unable to allocate rfkill device.\n");
8137 priv
->rfkill
->name
= priv
->cfg
->name
;
8138 priv
->rfkill
->data
= priv
;
8139 priv
->rfkill
->state
= RFKILL_STATE_UNBLOCKED
;
8140 priv
->rfkill
->toggle_radio
= iwl3945_rfkill_soft_rf_kill
;
8141 priv
->rfkill
->user_claim_unsupported
= 1;
8143 priv
->rfkill
->dev
.class->suspend
= NULL
;
8144 priv
->rfkill
->dev
.class->resume
= NULL
;
8146 ret
= rfkill_register(priv
->rfkill
);
8148 IWL_ERROR("Unable to register rfkill: %d\n", ret
);
8152 IWL_DEBUG_RF_KILL("RFKILL initialization complete.\n");
8156 if (priv
->rfkill
!= NULL
)
8157 rfkill_free(priv
->rfkill
);
8158 priv
->rfkill
= NULL
;
8161 IWL_DEBUG_RF_KILL("RFKILL initialization complete.\n");
8165 void iwl3945_rfkill_unregister(struct iwl3945_priv
*priv
)
8168 rfkill_unregister(priv
->rfkill
);
8170 priv
->rfkill
= NULL
;
8173 /* set rf-kill to the right state. */
8174 void iwl3945_rfkill_set_hw_state(struct iwl3945_priv
*priv
)
8180 if (iwl3945_is_rfkill_hw(priv
)) {
8181 rfkill_force_state(priv
->rfkill
, RFKILL_STATE_HARD_BLOCKED
);
8185 if (!iwl3945_is_rfkill_sw(priv
))
8186 rfkill_force_state(priv
->rfkill
, RFKILL_STATE_UNBLOCKED
);
8188 rfkill_force_state(priv
->rfkill
, RFKILL_STATE_SOFT_BLOCKED
);
8192 /*****************************************************************************
8194 * driver and module entry point
8196 *****************************************************************************/
8198 static struct pci_driver iwl3945_driver
= {
8200 .id_table
= iwl3945_hw_card_ids
,
8201 .probe
= iwl3945_pci_probe
,
8202 .remove
= __devexit_p(iwl3945_pci_remove
),
8204 .suspend
= iwl3945_pci_suspend
,
8205 .resume
= iwl3945_pci_resume
,
8209 static int __init
iwl3945_init(void)
8213 printk(KERN_INFO DRV_NAME
": " DRV_DESCRIPTION
", " DRV_VERSION
"\n");
8214 printk(KERN_INFO DRV_NAME
": " DRV_COPYRIGHT
"\n");
8216 ret
= iwl3945_rate_control_register();
8218 printk(KERN_ERR DRV_NAME
8219 "Unable to register rate control algorithm: %d\n", ret
);
8223 ret
= pci_register_driver(&iwl3945_driver
);
8225 printk(KERN_ERR DRV_NAME
"Unable to initialize PCI module\n");
8226 goto error_register
;
8232 iwl3945_rate_control_unregister();
8236 static void __exit
iwl3945_exit(void)
8238 pci_unregister_driver(&iwl3945_driver
);
8239 iwl3945_rate_control_unregister();
8242 MODULE_FIRMWARE(IWL3945_MODULE_FIRMWARE(IWL3945_UCODE_API_MAX
));
8244 module_param_named(antenna
, iwl3945_param_antenna
, int, 0444);
8245 MODULE_PARM_DESC(antenna
, "select antenna (1=Main, 2=Aux, default 0 [both])");
8246 module_param_named(disable
, iwl3945_param_disable
, int, 0444);
8247 MODULE_PARM_DESC(disable
, "manually disable the radio (default 0 [radio on])");
8248 module_param_named(hwcrypto
, iwl3945_param_hwcrypto
, int, 0444);
8249 MODULE_PARM_DESC(hwcrypto
,
8250 "using hardware crypto engine (default 0 [software])\n");
8251 module_param_named(debug
, iwl3945_param_debug
, uint
, 0444);
8252 MODULE_PARM_DESC(debug
, "debug output mask");
8253 module_param_named(disable_hw_scan
, iwl3945_param_disable_hw_scan
, int, 0444);
8254 MODULE_PARM_DESC(disable_hw_scan
, "disable hardware scanning (default 0)");
8256 module_param_named(queues_num
, iwl3945_param_queues_num
, int, 0444);
8257 MODULE_PARM_DESC(queues_num
, "number of hw queues.");
8259 module_exit(iwl3945_exit
);
8260 module_init(iwl3945_init
);