projects / deliverable / linux.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
net: remove interrupt.h inclusion from netdevice.h
[deliverable/linux.git] / drivers / net / wireless / libertas / if_spi.c
1 /*
2 * linux/drivers/net/wireless/libertas/if_spi.c
3 *
4 * Driver for Marvell SPI WLAN cards.
5 *
6 * Copyright 2008 Analog Devices Inc.
7 *
8 * Authors:
9 * Andrey Yurovsky <andrey@cozybit.com>
10 * Colin McCabe <colin@cozybit.com>
11 *
12 * Inspired by if_sdio.c, Copyright 2007-2008 Pierre Ossman
13 *
14 * This program is free software; you can redistribute it and/or modify
15 * it under the terms of the GNU General Public License as published by
16 * the Free Software Foundation; either version 2 of the License, or
17 * (at your option) any later version.
18 */
19
20 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
21
22 #include <linux/hardirq.h>
23 #include <linux/interrupt.h>
24 #include <linux/moduleparam.h>
25 #include <linux/firmware.h>
26 #include <linux/jiffies.h>
27 #include <linux/list.h>
28 #include <linux/netdevice.h>
29 #include <linux/slab.h>
30 #include <linux/spi/libertas_spi.h>
31 #include <linux/spi/spi.h>
32
33 #include "host.h"
34 #include "decl.h"
35 #include "defs.h"
36 #include "dev.h"
37 #include "if_spi.h"
38
39 struct if_spi_packet {
40 struct list_head list;
41 u16 blen;
42 u8 buffer[0] __attribute__((aligned(4)));
43 };
44
45 struct if_spi_card {
46 struct spi_device *spi;
47 struct lbs_private *priv;
48 struct libertas_spi_platform_data *pdata;
49
50 /* The card ID and card revision, as reported by the hardware. */
51 u16 card_id;
52 u8 card_rev;
53
54 /* The last time that we initiated an SPU operation */
55 unsigned long prev_xfer_time;
56
57 int use_dummy_writes;
58 unsigned long spu_port_delay;
59 unsigned long spu_reg_delay;
60
61 /* Handles all SPI communication (except for FW load) */
62 struct workqueue_struct *workqueue;
63 struct work_struct packet_work;
64 struct work_struct resume_work;
65
66 u8 cmd_buffer[IF_SPI_CMD_BUF_SIZE];
67
68 /* A buffer of incoming packets from libertas core.
69 * Since we can't sleep in hw_host_to_card, we have to buffer
70 * them. */
71 struct list_head cmd_packet_list;
72 struct list_head data_packet_list;
73
74 /* Protects cmd_packet_list and data_packet_list */
75 spinlock_t buffer_lock;
76
77 /* True is card suspended */
78 u8 suspended;
79 };
80
81 static void free_if_spi_card(struct if_spi_card *card)
82 {
83 struct list_head *cursor, *next;
84 struct if_spi_packet *packet;
85
86 list_for_each_safe(cursor, next, &card->cmd_packet_list) {
87 packet = container_of(cursor, struct if_spi_packet, list);
88 list_del(&packet->list);
89 kfree(packet);
90 }
91 list_for_each_safe(cursor, next, &card->data_packet_list) {
92 packet = container_of(cursor, struct if_spi_packet, list);
93 list_del(&packet->list);
94 kfree(packet);
95 }
96 spi_set_drvdata(card->spi, NULL);
97 kfree(card);
98 }
99
100 #define MODEL_8385 0x04
101 #define MODEL_8686 0x0b
102 #define MODEL_8688 0x10
103
104 static const struct lbs_fw_table fw_table[] = {
105 { MODEL_8385, "libertas/gspi8385_helper.bin", "libertas/gspi8385.bin" },
106 { MODEL_8385, "libertas/gspi8385_hlp.bin", "libertas/gspi8385.bin" },
107 { MODEL_8686, "libertas/gspi8686_v9_helper.bin", "libertas/gspi8686_v9.bin" },
108 { MODEL_8686, "libertas/gspi8686_hlp.bin", "libertas/gspi8686.bin" },
109 { MODEL_8688, "libertas/gspi8688_helper.bin", "libertas/gspi8688.bin" },
110 { 0, NULL, NULL }
111 };
112 MODULE_FIRMWARE("libertas/gspi8385_helper.bin");
113 MODULE_FIRMWARE("libertas/gspi8385_hlp.bin");
114 MODULE_FIRMWARE("libertas/gspi8385.bin");
115 MODULE_FIRMWARE("libertas/gspi8686_v9_helper.bin");
116 MODULE_FIRMWARE("libertas/gspi8686_v9.bin");
117 MODULE_FIRMWARE("libertas/gspi8686_hlp.bin");
118 MODULE_FIRMWARE("libertas/gspi8686.bin");
119 MODULE_FIRMWARE("libertas/gspi8688_helper.bin");
120 MODULE_FIRMWARE("libertas/gspi8688.bin");
121
122
123 /*
124 * SPI Interface Unit Routines
125 *
126 * The SPU sits between the host and the WLAN module.
127 * All communication with the firmware is through SPU transactions.
128 *
129 * First we have to put a SPU register name on the bus. Then we can
130 * either read from or write to that register.
131 *
132 */
133
134 static void spu_transaction_init(struct if_spi_card *card)
135 {
136 if (!time_after(jiffies, card->prev_xfer_time + 1)) {
137 /* Unfortunately, the SPU requires a delay between successive
138 * transactions. If our last transaction was more than a jiffy
139 * ago, we have obviously already delayed enough.
140 * If not, we have to busy-wait to be on the safe side. */
141 ndelay(400);
142 }
143 }
144
145 static void spu_transaction_finish(struct if_spi_card *card)
146 {
147 card->prev_xfer_time = jiffies;
148 }
149
150 /*
151 * Write out a byte buffer to an SPI register,
152 * using a series of 16-bit transfers.
153 */
154 static int spu_write(struct if_spi_card *card, u16 reg, const u8 *buf, int len)
155 {
156 int err = 0;
157 __le16 reg_out = cpu_to_le16(reg | IF_SPI_WRITE_OPERATION_MASK);
158 struct spi_message m;
159 struct spi_transfer reg_trans;
160 struct spi_transfer data_trans;
161
162 spi_message_init(&m);
163 memset(&reg_trans, 0, sizeof(reg_trans));
164 memset(&data_trans, 0, sizeof(data_trans));
165
166 /* You must give an even number of bytes to the SPU, even if it
167 * doesn't care about the last one. */
168 BUG_ON(len & 0x1);
169
170 spu_transaction_init(card);
171
172 /* write SPU register index */
173 reg_trans.tx_buf = &reg_out;
174 reg_trans.len = sizeof(reg_out);
175
176 data_trans.tx_buf = buf;
177 data_trans.len = len;
178
179 spi_message_add_tail(&reg_trans, &m);
180 spi_message_add_tail(&data_trans, &m);
181
182 err = spi_sync(card->spi, &m);
183 spu_transaction_finish(card);
184 return err;
185 }
186
187 static inline int spu_write_u16(struct if_spi_card *card, u16 reg, u16 val)
188 {
189 __le16 buff;
190
191 buff = cpu_to_le16(val);
192 return spu_write(card, reg, (u8 *)&buff, sizeof(u16));
193 }
194
195 static inline int spu_reg_is_port_reg(u16 reg)
196 {
197 switch (reg) {
198 case IF_SPI_IO_RDWRPORT_REG:
199 case IF_SPI_CMD_RDWRPORT_REG:
200 case IF_SPI_DATA_RDWRPORT_REG:
201 return 1;
202 default:
203 return 0;
204 }
205 }
206
207 static int spu_read(struct if_spi_card *card, u16 reg, u8 *buf, int len)
208 {
209 unsigned int delay;
210 int err = 0;
211 __le16 reg_out = cpu_to_le16(reg | IF_SPI_READ_OPERATION_MASK);
212 struct spi_message m;
213 struct spi_transfer reg_trans;
214 struct spi_transfer dummy_trans;
215 struct spi_transfer data_trans;
216
217 /*
218 * You must take an even number of bytes from the SPU, even if you
219 * don't care about the last one.
220 */
221 BUG_ON(len & 0x1);
222
223 spu_transaction_init(card);
224
225 spi_message_init(&m);
226 memset(&reg_trans, 0, sizeof(reg_trans));
227 memset(&dummy_trans, 0, sizeof(dummy_trans));
228 memset(&data_trans, 0, sizeof(data_trans));
229
230 /* write SPU register index */
231 reg_trans.tx_buf = &reg_out;
232 reg_trans.len = sizeof(reg_out);
233 spi_message_add_tail(&reg_trans, &m);
234
235 delay = spu_reg_is_port_reg(reg) ? card->spu_port_delay :
236 card->spu_reg_delay;
237 if (card->use_dummy_writes) {
238 /* Clock in dummy cycles while the SPU fills the FIFO */
239 dummy_trans.len = delay / 8;
240 spi_message_add_tail(&dummy_trans, &m);
241 } else {
242 /* Busy-wait while the SPU fills the FIFO */
243 reg_trans.delay_usecs =
244 DIV_ROUND_UP((100 + (delay * 10)), 1000);
245 }
246
247 /* read in data */
248 data_trans.rx_buf = buf;
249 data_trans.len = len;
250 spi_message_add_tail(&data_trans, &m);
251
252 err = spi_sync(card->spi, &m);
253 spu_transaction_finish(card);
254 return err;
255 }
256
257 /* Read 16 bits from an SPI register */
258 static inline int spu_read_u16(struct if_spi_card *card, u16 reg, u16 *val)
259 {
260 __le16 buf;
261 int ret;
262
263 ret = spu_read(card, reg, (u8 *)&buf, sizeof(buf));
264 if (ret == 0)
265 *val = le16_to_cpup(&buf);
266 return ret;
267 }
268
269 /*
270 * Read 32 bits from an SPI register.
271 * The low 16 bits are read first.
272 */
273 static int spu_read_u32(struct if_spi_card *card, u16 reg, u32 *val)
274 {
275 __le32 buf;
276 int err;
277
278 err = spu_read(card, reg, (u8 *)&buf, sizeof(buf));
279 if (!err)
280 *val = le32_to_cpup(&buf);
281 return err;
282 }
283
284 /*
285 * Keep reading 16 bits from an SPI register until you get the correct result.
286 *
287 * If mask = 0, the correct result is any non-zero number.
288 * If mask != 0, the correct result is any number where
289 * number & target_mask == target
290 *
291 * Returns -ETIMEDOUT if a second passes without the correct result.
292 */
293 static int spu_wait_for_u16(struct if_spi_card *card, u16 reg,
294 u16 target_mask, u16 target)
295 {
296 int err;
297 unsigned long timeout = jiffies + 5*HZ;
298 while (1) {
299 u16 val;
300 err = spu_read_u16(card, reg, &val);
301 if (err)
302 return err;
303 if (target_mask) {
304 if ((val & target_mask) == target)
305 return 0;
306 } else {
307 if (val)
308 return 0;
309 }
310 udelay(100);
311 if (time_after(jiffies, timeout)) {
312 pr_err("%s: timeout with val=%02x, target_mask=%02x, target=%02x\n",
313 __func__, val, target_mask, target);
314 return -ETIMEDOUT;
315 }
316 }
317 }
318
319 /*
320 * Read 16 bits from an SPI register until you receive a specific value.
321 * Returns -ETIMEDOUT if a 4 tries pass without success.
322 */
323 static int spu_wait_for_u32(struct if_spi_card *card, u32 reg, u32 target)
324 {
325 int err, try;
326 for (try = 0; try < 4; ++try) {
327 u32 val = 0;
328 err = spu_read_u32(card, reg, &val);
329 if (err)
330 return err;
331 if (val == target)
332 return 0;
333 mdelay(100);
334 }
335 return -ETIMEDOUT;
336 }
337
338 static int spu_set_interrupt_mode(struct if_spi_card *card,
339 int suppress_host_int,
340 int auto_int)
341 {
342 int err = 0;
343
344 /*
345 * We can suppress a host interrupt by clearing the appropriate
346 * bit in the "host interrupt status mask" register
347 */
348 if (suppress_host_int) {
349 err = spu_write_u16(card, IF_SPI_HOST_INT_STATUS_MASK_REG, 0);
350 if (err)
351 return err;
352 } else {
353 err = spu_write_u16(card, IF_SPI_HOST_INT_STATUS_MASK_REG,
354 IF_SPI_HISM_TX_DOWNLOAD_RDY |
355 IF_SPI_HISM_RX_UPLOAD_RDY |
356 IF_SPI_HISM_CMD_DOWNLOAD_RDY |
357 IF_SPI_HISM_CARDEVENT |
358 IF_SPI_HISM_CMD_UPLOAD_RDY);
359 if (err)
360 return err;
361 }
362
363 /*
364 * If auto-interrupts are on, the completion of certain transactions
365 * will trigger an interrupt automatically. If auto-interrupts
366 * are off, we need to set the "Card Interrupt Cause" register to
367 * trigger a card interrupt.
368 */
369 if (auto_int) {
370 err = spu_write_u16(card, IF_SPI_HOST_INT_CTRL_REG,
371 IF_SPI_HICT_TX_DOWNLOAD_OVER_AUTO |
372 IF_SPI_HICT_RX_UPLOAD_OVER_AUTO |
373 IF_SPI_HICT_CMD_DOWNLOAD_OVER_AUTO |
374 IF_SPI_HICT_CMD_UPLOAD_OVER_AUTO);
375 if (err)
376 return err;
377 } else {
378 err = spu_write_u16(card, IF_SPI_HOST_INT_STATUS_MASK_REG, 0);
379 if (err)
380 return err;
381 }
382 return err;
383 }
384
385 static int spu_get_chip_revision(struct if_spi_card *card,
386 u16 *card_id, u8 *card_rev)
387 {
388 int err = 0;
389 u32 dev_ctrl;
390 err = spu_read_u32(card, IF_SPI_DEVICEID_CTRL_REG, &dev_ctrl);
391 if (err)
392 return err;
393 *card_id = IF_SPI_DEVICEID_CTRL_REG_TO_CARD_ID(dev_ctrl);
394 *card_rev = IF_SPI_DEVICEID_CTRL_REG_TO_CARD_REV(dev_ctrl);
395 return err;
396 }
397
398 static int spu_set_bus_mode(struct if_spi_card *card, u16 mode)
399 {
400 int err = 0;
401 u16 rval;
402 /* set bus mode */
403 err = spu_write_u16(card, IF_SPI_SPU_BUS_MODE_REG, mode);
404 if (err)
405 return err;
406 /* Check that we were able to read back what we just wrote. */
407 err = spu_read_u16(card, IF_SPI_SPU_BUS_MODE_REG, &rval);
408 if (err)
409 return err;
410 if ((rval & 0xF) != mode) {
411 pr_err("Can't read bus mode register\n");
412 return -EIO;
413 }
414 return 0;
415 }
416
417 static int spu_init(struct if_spi_card *card, int use_dummy_writes)
418 {
419 int err = 0;
420 u32 delay;
421
422 /*
423 * We have to start up in timed delay mode so that we can safely
424 * read the Delay Read Register.
425 */
426 card->use_dummy_writes = 0;
427 err = spu_set_bus_mode(card,
428 IF_SPI_BUS_MODE_SPI_CLOCK_PHASE_RISING |
429 IF_SPI_BUS_MODE_DELAY_METHOD_TIMED |
430 IF_SPI_BUS_MODE_16_BIT_ADDRESS_16_BIT_DATA);
431 if (err)
432 return err;
433 card->spu_port_delay = 1000;
434 card->spu_reg_delay = 1000;
435 err = spu_read_u32(card, IF_SPI_DELAY_READ_REG, &delay);
436 if (err)
437 return err;
438 card->spu_port_delay = delay & 0x0000ffff;
439 card->spu_reg_delay = (delay & 0xffff0000) >> 16;
440
441 /* If dummy clock delay mode has been requested, switch to it now */
442 if (use_dummy_writes) {
443 card->use_dummy_writes = 1;
444 err = spu_set_bus_mode(card,
445 IF_SPI_BUS_MODE_SPI_CLOCK_PHASE_RISING |
446 IF_SPI_BUS_MODE_DELAY_METHOD_DUMMY_CLOCK |
447 IF_SPI_BUS_MODE_16_BIT_ADDRESS_16_BIT_DATA);
448 if (err)
449 return err;
450 }
451
452 lbs_deb_spi("Initialized SPU unit. "
453 "spu_port_delay=0x%04lx, spu_reg_delay=0x%04lx\n",
454 card->spu_port_delay, card->spu_reg_delay);
455 return err;
456 }
457
458 /*
459 * Firmware Loading
460 */
461
462 static int if_spi_prog_helper_firmware(struct if_spi_card *card,
463 const struct firmware *firmware)
464 {
465 int err = 0;
466 int bytes_remaining;
467 const u8 *fw;
468 u8 temp[HELPER_FW_LOAD_CHUNK_SZ];
469
470 lbs_deb_enter(LBS_DEB_SPI);
471
472 err = spu_set_interrupt_mode(card, 1, 0);
473 if (err)
474 goto out;
475
476 bytes_remaining = firmware->size;
477 fw = firmware->data;
478
479 /* Load helper firmware image */
480 while (bytes_remaining > 0) {
481 /*
482 * Scratch pad 1 should contain the number of bytes we
483 * want to download to the firmware
484 */
485 err = spu_write_u16(card, IF_SPI_SCRATCH_1_REG,
486 HELPER_FW_LOAD_CHUNK_SZ);
487 if (err)
488 goto out;
489
490 err = spu_wait_for_u16(card, IF_SPI_HOST_INT_STATUS_REG,
491 IF_SPI_HIST_CMD_DOWNLOAD_RDY,
492 IF_SPI_HIST_CMD_DOWNLOAD_RDY);
493 if (err)
494 goto out;
495
496 /*
497 * Feed the data into the command read/write port reg
498 * in chunks of 64 bytes
499 */
500 memset(temp, 0, sizeof(temp));
501 memcpy(temp, fw,
502 min(bytes_remaining, HELPER_FW_LOAD_CHUNK_SZ));
503 mdelay(10);
504 err = spu_write(card, IF_SPI_CMD_RDWRPORT_REG,
505 temp, HELPER_FW_LOAD_CHUNK_SZ);
506 if (err)
507 goto out;
508
509 /* Interrupt the boot code */
510 err = spu_write_u16(card, IF_SPI_HOST_INT_STATUS_REG, 0);
511 if (err)
512 goto out;
513 err = spu_write_u16(card, IF_SPI_CARD_INT_CAUSE_REG,
514 IF_SPI_CIC_CMD_DOWNLOAD_OVER);
515 if (err)
516 goto out;
517 bytes_remaining -= HELPER_FW_LOAD_CHUNK_SZ;
518 fw += HELPER_FW_LOAD_CHUNK_SZ;
519 }
520
521 /*
522 * Once the helper / single stage firmware download is complete,
523 * write 0 to scratch pad 1 and interrupt the
524 * bootloader. This completes the helper download.
525 */
526 err = spu_write_u16(card, IF_SPI_SCRATCH_1_REG, FIRMWARE_DNLD_OK);
527 if (err)
528 goto out;
529 err = spu_write_u16(card, IF_SPI_HOST_INT_STATUS_REG, 0);
530 if (err)
531 goto out;
532 err = spu_write_u16(card, IF_SPI_CARD_INT_CAUSE_REG,
533 IF_SPI_CIC_CMD_DOWNLOAD_OVER);
534 goto out;
535
536 lbs_deb_spi("waiting for helper to boot...\n");
537
538 out:
539 if (err)
540 pr_err("failed to load helper firmware (err=%d)\n", err);
541 lbs_deb_leave_args(LBS_DEB_SPI, "err %d", err);
542 return err;
543 }
544
545 /*
546 * Returns the length of the next packet the firmware expects us to send.
547 * Sets crc_err if the previous transfer had a CRC error.
548 */
549 static int if_spi_prog_main_firmware_check_len(struct if_spi_card *card,
550 int *crc_err)
551 {
552 u16 len;
553 int err = 0;
554
555 /*
556 * wait until the host interrupt status register indicates
557 * that we are ready to download
558 */
559 err = spu_wait_for_u16(card, IF_SPI_HOST_INT_STATUS_REG,
560 IF_SPI_HIST_CMD_DOWNLOAD_RDY,
561 IF_SPI_HIST_CMD_DOWNLOAD_RDY);
562 if (err) {
563 pr_err("timed out waiting for host_int_status\n");
564 return err;
565 }
566
567 /* Ask the device how many bytes of firmware it wants. */
568 err = spu_read_u16(card, IF_SPI_SCRATCH_1_REG, &len);
569 if (err)
570 return err;
571
572 if (len > IF_SPI_CMD_BUF_SIZE) {
573 pr_err("firmware load device requested a larger transfer than we are prepared to handle (len = %d)\n",
574 len);
575 return -EIO;
576 }
577 if (len & 0x1) {
578 lbs_deb_spi("%s: crc error\n", __func__);
579 len &= ~0x1;
580 *crc_err = 1;
581 } else
582 *crc_err = 0;
583
584 return len;
585 }
586
587 static int if_spi_prog_main_firmware(struct if_spi_card *card,
588 const struct firmware *firmware)
589 {
590 struct lbs_private *priv = card->priv;
591 int len, prev_len;
592 int bytes, crc_err = 0, err = 0;
593 const u8 *fw;
594 u16 num_crc_errs;
595
596 lbs_deb_enter(LBS_DEB_SPI);
597
598 err = spu_set_interrupt_mode(card, 1, 0);
599 if (err)
600 goto out;
601
602 err = spu_wait_for_u16(card, IF_SPI_SCRATCH_1_REG, 0, 0);
603 if (err) {
604 netdev_err(priv->dev,
605 "%s: timed out waiting for initial scratch reg = 0\n",
606 __func__);
607 goto out;
608 }
609
610 num_crc_errs = 0;
611 prev_len = 0;
612 bytes = firmware->size;
613 fw = firmware->data;
614 while ((len = if_spi_prog_main_firmware_check_len(card, &crc_err))) {
615 if (len < 0) {
616 err = len;
617 goto out;
618 }
619 if (bytes < 0) {
620 /*
621 * If there are no more bytes left, we would normally
622 * expect to have terminated with len = 0
623 */
624 netdev_err(priv->dev,
625 "Firmware load wants more bytes than we have to offer.\n");
626 break;
627 }
628 if (crc_err) {
629 /* Previous transfer failed. */
630 if (++num_crc_errs > MAX_MAIN_FW_LOAD_CRC_ERR) {
631 pr_err("Too many CRC errors encountered in firmware load.\n");
632 err = -EIO;
633 goto out;
634 }
635 } else {
636 /* Previous transfer succeeded. Advance counters. */
637 bytes -= prev_len;
638 fw += prev_len;
639 }
640 if (bytes < len) {
641 memset(card->cmd_buffer, 0, len);
642 memcpy(card->cmd_buffer, fw, bytes);
643 } else
644 memcpy(card->cmd_buffer, fw, len);
645
646 err = spu_write_u16(card, IF_SPI_HOST_INT_STATUS_REG, 0);
647 if (err)
648 goto out;
649 err = spu_write(card, IF_SPI_CMD_RDWRPORT_REG,
650 card->cmd_buffer, len);
651 if (err)
652 goto out;
653 err = spu_write_u16(card, IF_SPI_CARD_INT_CAUSE_REG ,
654 IF_SPI_CIC_CMD_DOWNLOAD_OVER);
655 if (err)
656 goto out;
657 prev_len = len;
658 }
659 if (bytes > prev_len) {
660 pr_err("firmware load wants fewer bytes than we have to offer\n");
661 }
662
663 /* Confirm firmware download */
664 err = spu_wait_for_u32(card, IF_SPI_SCRATCH_4_REG,
665 SUCCESSFUL_FW_DOWNLOAD_MAGIC);
666 if (err) {
667 pr_err("failed to confirm the firmware download\n");
668 goto out;
669 }
670
671 out:
672 if (err)
673 pr_err("failed to load firmware (err=%d)\n", err);
674 lbs_deb_leave_args(LBS_DEB_SPI, "err %d", err);
675 return err;
676 }
677
678 /*
679 * SPI Transfer Thread
680 *
681 * The SPI worker handles all SPI transfers, so there is no need for a lock.
682 */
683
684 /* Move a command from the card to the host */
685 static int if_spi_c2h_cmd(struct if_spi_card *card)
686 {
687 struct lbs_private *priv = card->priv;
688 unsigned long flags;
689 int err = 0;
690 u16 len;
691 u8 i;
692
693 /*
694 * We need a buffer big enough to handle whatever people send to
695 * hw_host_to_card
696 */
697 BUILD_BUG_ON(IF_SPI_CMD_BUF_SIZE < LBS_CMD_BUFFER_SIZE);
698 BUILD_BUG_ON(IF_SPI_CMD_BUF_SIZE < LBS_UPLD_SIZE);
699
700 /*
701 * It's just annoying if the buffer size isn't a multiple of 4, because
702 * then we might have len < IF_SPI_CMD_BUF_SIZE but
703 * ALIGN(len, 4) > IF_SPI_CMD_BUF_SIZE
704 */
705 BUILD_BUG_ON(IF_SPI_CMD_BUF_SIZE % 4 != 0);
706
707 lbs_deb_enter(LBS_DEB_SPI);
708
709 /* How many bytes are there to read? */
710 err = spu_read_u16(card, IF_SPI_SCRATCH_2_REG, &len);
711 if (err)
712 goto out;
713 if (!len) {
714 netdev_err(priv->dev, "%s: error: card has no data for host\n",
715 __func__);
716 err = -EINVAL;
717 goto out;
718 } else if (len > IF_SPI_CMD_BUF_SIZE) {
719 netdev_err(priv->dev,
720 "%s: error: response packet too large: %d bytes, but maximum is %d\n",
721 __func__, len, IF_SPI_CMD_BUF_SIZE);
722 err = -EINVAL;
723 goto out;
724 }
725
726 /* Read the data from the WLAN module into our command buffer */
727 err = spu_read(card, IF_SPI_CMD_RDWRPORT_REG,
728 card->cmd_buffer, ALIGN(len, 4));
729 if (err)
730 goto out;
731
732 spin_lock_irqsave(&priv->driver_lock, flags);
733 i = (priv->resp_idx == 0) ? 1 : 0;
734 BUG_ON(priv->resp_len[i]);
735 priv->resp_len[i] = len;
736 memcpy(priv->resp_buf[i], card->cmd_buffer, len);
737 lbs_notify_command_response(priv, i);
738 spin_unlock_irqrestore(&priv->driver_lock, flags);
739
740 out:
741 if (err)
742 netdev_err(priv->dev, "%s: err=%d\n", __func__, err);
743 lbs_deb_leave(LBS_DEB_SPI);
744 return err;
745 }
746
747 /* Move data from the card to the host */
748 static int if_spi_c2h_data(struct if_spi_card *card)
749 {
750 struct lbs_private *priv = card->priv;
751 struct sk_buff *skb;
752 char *data;
753 u16 len;
754 int err = 0;
755
756 lbs_deb_enter(LBS_DEB_SPI);
757
758 /* How many bytes are there to read? */
759 err = spu_read_u16(card, IF_SPI_SCRATCH_1_REG, &len);
760 if (err)
761 goto out;
762 if (!len) {
763 netdev_err(priv->dev, "%s: error: card has no data for host\n",
764 __func__);
765 err = -EINVAL;
766 goto out;
767 } else if (len > MRVDRV_ETH_RX_PACKET_BUFFER_SIZE) {
768 netdev_err(priv->dev,
769 "%s: error: card has %d bytes of data, but our maximum skb size is %zu\n",
770 __func__, len, MRVDRV_ETH_RX_PACKET_BUFFER_SIZE);
771 err = -EINVAL;
772 goto out;
773 }
774
775 /* TODO: should we allocate a smaller skb if we have less data? */
776 skb = dev_alloc_skb(MRVDRV_ETH_RX_PACKET_BUFFER_SIZE);
777 if (!skb) {
778 err = -ENOBUFS;
779 goto out;
780 }
781 skb_reserve(skb, IPFIELD_ALIGN_OFFSET);
782 data = skb_put(skb, len);
783
784 /* Read the data from the WLAN module into our skb... */
785 err = spu_read(card, IF_SPI_DATA_RDWRPORT_REG, data, ALIGN(len, 4));
786 if (err)
787 goto free_skb;
788
789 /* pass the SKB to libertas */
790 err = lbs_process_rxed_packet(card->priv, skb);
791 if (err)
792 goto free_skb;
793
794 /* success */
795 goto out;
796
797 free_skb:
798 dev_kfree_skb(skb);
799 out:
800 if (err)
801 netdev_err(priv->dev, "%s: err=%d\n", __func__, err);
802 lbs_deb_leave(LBS_DEB_SPI);
803 return err;
804 }
805
806 /* Move data or a command from the host to the card. */
807 static void if_spi_h2c(struct if_spi_card *card,
808 struct if_spi_packet *packet, int type)
809 {
810 struct lbs_private *priv = card->priv;
811 int err = 0;
812 u16 int_type, port_reg;
813
814 switch (type) {
815 case MVMS_DAT:
816 int_type = IF_SPI_CIC_TX_DOWNLOAD_OVER;
817 port_reg = IF_SPI_DATA_RDWRPORT_REG;
818 break;
819 case MVMS_CMD:
820 int_type = IF_SPI_CIC_CMD_DOWNLOAD_OVER;
821 port_reg = IF_SPI_CMD_RDWRPORT_REG;
822 break;
823 default:
824 netdev_err(priv->dev, "can't transfer buffer of type %d\n",
825 type);
826 err = -EINVAL;
827 goto out;
828 }
829
830 /* Write the data to the card */
831 err = spu_write(card, port_reg, packet->buffer, packet->blen);
832 if (err)
833 goto out;
834
835 out:
836 kfree(packet);
837
838 if (err)
839 netdev_err(priv->dev, "%s: error %d\n", __func__, err);
840 }
841
842 /* Inform the host about a card event */
843 static void if_spi_e2h(struct if_spi_card *card)
844 {
845 int err = 0;
846 u32 cause;
847 struct lbs_private *priv = card->priv;
848
849 err = spu_read_u32(card, IF_SPI_SCRATCH_3_REG, &cause);
850 if (err)
851 goto out;
852
853 /* re-enable the card event interrupt */
854 spu_write_u16(card, IF_SPI_HOST_INT_STATUS_REG,
855 ~IF_SPI_HICU_CARD_EVENT);
856
857 /* generate a card interrupt */
858 spu_write_u16(card, IF_SPI_CARD_INT_CAUSE_REG, IF_SPI_CIC_HOST_EVENT);
859
860 lbs_queue_event(priv, cause & 0xff);
861 out:
862 if (err)
863 netdev_err(priv->dev, "%s: error %d\n", __func__, err);
864 }
865
866 static void if_spi_host_to_card_worker(struct work_struct *work)
867 {
868 int err;
869 struct if_spi_card *card;
870 u16 hiStatus;
871 unsigned long flags;
872 struct if_spi_packet *packet;
873 struct lbs_private *priv;
874
875 card = container_of(work, struct if_spi_card, packet_work);
876 priv = card->priv;
877
878 lbs_deb_enter(LBS_DEB_SPI);
879
880 /*
881 * Read the host interrupt status register to see what we
882 * can do.
883 */
884 err = spu_read_u16(card, IF_SPI_HOST_INT_STATUS_REG,
885 &hiStatus);
886 if (err) {
887 netdev_err(priv->dev, "I/O error\n");
888 goto err;
889 }
890
891 if (hiStatus & IF_SPI_HIST_CMD_UPLOAD_RDY) {
892 err = if_spi_c2h_cmd(card);
893 if (err)
894 goto err;
895 }
896 if (hiStatus & IF_SPI_HIST_RX_UPLOAD_RDY) {
897 err = if_spi_c2h_data(card);
898 if (err)
899 goto err;
900 }
901
902 /*
903 * workaround: in PS mode, the card does not set the Command
904 * Download Ready bit, but it sets TX Download Ready.
905 */
906 if (hiStatus & IF_SPI_HIST_CMD_DOWNLOAD_RDY ||
907 (card->priv->psstate != PS_STATE_FULL_POWER &&
908 (hiStatus & IF_SPI_HIST_TX_DOWNLOAD_RDY))) {
909 /*
910 * This means two things. First of all,
911 * if there was a previous command sent, the card has
912 * successfully received it.
913 * Secondly, it is now ready to download another
914 * command.
915 */
916 lbs_host_to_card_done(card->priv);
917
918 /* Do we have any command packets from the host to send? */
919 packet = NULL;
920 spin_lock_irqsave(&card->buffer_lock, flags);
921 if (!list_empty(&card->cmd_packet_list)) {
922 packet = (struct if_spi_packet *)(card->
923 cmd_packet_list.next);
924 list_del(&packet->list);
925 }
926 spin_unlock_irqrestore(&card->buffer_lock, flags);
927
928 if (packet)
929 if_spi_h2c(card, packet, MVMS_CMD);
930 }
931 if (hiStatus & IF_SPI_HIST_TX_DOWNLOAD_RDY) {
932 /* Do we have any data packets from the host to send? */
933 packet = NULL;
934 spin_lock_irqsave(&card->buffer_lock, flags);
935 if (!list_empty(&card->data_packet_list)) {
936 packet = (struct if_spi_packet *)(card->
937 data_packet_list.next);
938 list_del(&packet->list);
939 }
940 spin_unlock_irqrestore(&card->buffer_lock, flags);
941
942 if (packet)
943 if_spi_h2c(card, packet, MVMS_DAT);
944 }
945 if (hiStatus & IF_SPI_HIST_CARD_EVENT)
946 if_spi_e2h(card);
947
948 err:
949 if (err)
950 netdev_err(priv->dev, "%s: got error %d\n", __func__, err);
951
952 lbs_deb_leave(LBS_DEB_SPI);
953 }
954
955 /*
956 * Host to Card
957 *
958 * Called from Libertas to transfer some data to the WLAN device
959 * We can't sleep here.
960 */
961 static int if_spi_host_to_card(struct lbs_private *priv,
962 u8 type, u8 *buf, u16 nb)
963 {
964 int err = 0;
965 unsigned long flags;
966 struct if_spi_card *card = priv->card;
967 struct if_spi_packet *packet;
968 u16 blen;
969
970 lbs_deb_enter_args(LBS_DEB_SPI, "type %d, bytes %d", type, nb);
971
972 if (nb == 0) {
973 netdev_err(priv->dev, "%s: invalid size requested: %d\n",
974 __func__, nb);
975 err = -EINVAL;
976 goto out;
977 }
978 blen = ALIGN(nb, 4);
979 packet = kzalloc(sizeof(struct if_spi_packet) + blen, GFP_ATOMIC);
980 if (!packet) {
981 err = -ENOMEM;
982 goto out;
983 }
984 packet->blen = blen;
985 memcpy(packet->buffer, buf, nb);
986 memset(packet->buffer + nb, 0, blen - nb);
987
988 switch (type) {
989 case MVMS_CMD:
990 priv->dnld_sent = DNLD_CMD_SENT;
991 spin_lock_irqsave(&card->buffer_lock, flags);
992 list_add_tail(&packet->list, &card->cmd_packet_list);
993 spin_unlock_irqrestore(&card->buffer_lock, flags);
994 break;
995 case MVMS_DAT:
996 priv->dnld_sent = DNLD_DATA_SENT;
997 spin_lock_irqsave(&card->buffer_lock, flags);
998 list_add_tail(&packet->list, &card->data_packet_list);
999 spin_unlock_irqrestore(&card->buffer_lock, flags);
1000 break;
1001 default:
1002 netdev_err(priv->dev, "can't transfer buffer of type %d\n",
1003 type);
1004 err = -EINVAL;
1005 break;
1006 }
1007
1008 /* Queue spi xfer work */
1009 queue_work(card->workqueue, &card->packet_work);
1010 out:
1011 lbs_deb_leave_args(LBS_DEB_SPI, "err=%d", err);
1012 return err;
1013 }
1014
1015 /*
1016 * Host Interrupts
1017 *
1018 * Service incoming interrupts from the WLAN device. We can't sleep here, so
1019 * don't try to talk on the SPI bus, just queue the SPI xfer work.
1020 */
1021 static irqreturn_t if_spi_host_interrupt(int irq, void *dev_id)
1022 {
1023 struct if_spi_card *card = dev_id;
1024
1025 queue_work(card->workqueue, &card->packet_work);
1026
1027 return IRQ_HANDLED;
1028 }
1029
1030 /*
1031 * SPI callbacks
1032 */
1033
1034 static int if_spi_init_card(struct if_spi_card *card)
1035 {
1036 struct lbs_private *priv = card->priv;
1037 struct spi_device *spi = card->spi;
1038 int err, i;
1039 u32 scratch;
1040 const struct firmware *helper = NULL;
1041 const struct firmware *mainfw = NULL;
1042
1043 lbs_deb_enter(LBS_DEB_SPI);
1044
1045 err = spu_init(card, card->pdata->use_dummy_writes);
1046 if (err)
1047 goto out;
1048 err = spu_get_chip_revision(card, &card->card_id, &card->card_rev);
1049 if (err)
1050 goto out;
1051
1052 err = spu_read_u32(card, IF_SPI_SCRATCH_4_REG, &scratch);
1053 if (err)
1054 goto out;
1055 if (scratch == SUCCESSFUL_FW_DOWNLOAD_MAGIC)
1056 lbs_deb_spi("Firmware is already loaded for "
1057 "Marvell WLAN 802.11 adapter\n");
1058 else {
1059 /* Check if we support this card */
1060 for (i = 0; i < ARRAY_SIZE(fw_table); i++) {
1061 if (card->card_id == fw_table[i].model)
1062 break;
1063 }
1064 if (i == ARRAY_SIZE(fw_table)) {
1065 netdev_err(priv->dev, "Unsupported chip_id: 0x%02x\n",
1066 card->card_id);
1067 err = -ENODEV;
1068 goto out;
1069 }
1070
1071 err = lbs_get_firmware(&card->spi->dev, NULL, NULL,
1072 card->card_id, &fw_table[0], &helper,
1073 &mainfw);
1074 if (err) {
1075 netdev_err(priv->dev, "failed to find firmware (%d)\n",
1076 err);
1077 goto out;
1078 }
1079
1080 lbs_deb_spi("Initializing FW for Marvell WLAN 802.11 adapter "
1081 "(chip_id = 0x%04x, chip_rev = 0x%02x) "
1082 "attached to SPI bus_num %d, chip_select %d. "
1083 "spi->max_speed_hz=%d\n",
1084 card->card_id, card->card_rev,
1085 spi->master->bus_num, spi->chip_select,
1086 spi->max_speed_hz);
1087 err = if_spi_prog_helper_firmware(card, helper);
1088 if (err)
1089 goto out;
1090 err = if_spi_prog_main_firmware(card, mainfw);
1091 if (err)
1092 goto out;
1093 lbs_deb_spi("loaded FW for Marvell WLAN 802.11 adapter\n");
1094 }
1095
1096 err = spu_set_interrupt_mode(card, 0, 1);
1097 if (err)
1098 goto out;
1099
1100 out:
1101 if (helper)
1102 release_firmware(helper);
1103 if (mainfw)
1104 release_firmware(mainfw);
1105
1106 lbs_deb_leave_args(LBS_DEB_SPI, "err %d\n", err);
1107
1108 return err;
1109 }
1110
1111 static void if_spi_resume_worker(struct work_struct *work)
1112 {
1113 struct if_spi_card *card;
1114
1115 card = container_of(work, struct if_spi_card, resume_work);
1116
1117 if (card->suspended) {
1118 if (card->pdata->setup)
1119 card->pdata->setup(card->spi);
1120
1121 /* Init card ... */
1122 if_spi_init_card(card);
1123
1124 enable_irq(card->spi->irq);
1125
1126 /* And resume it ... */
1127 lbs_resume(card->priv);
1128
1129 card->suspended = 0;
1130 }
1131 }
1132
1133 static int __devinit if_spi_probe(struct spi_device *spi)
1134 {
1135 struct if_spi_card *card;
1136 struct lbs_private *priv = NULL;
1137 struct libertas_spi_platform_data *pdata = spi->dev.platform_data;
1138 int err = 0;
1139
1140 lbs_deb_enter(LBS_DEB_SPI);
1141
1142 if (!pdata) {
1143 err = -EINVAL;
1144 goto out;
1145 }
1146
1147 if (pdata->setup) {
1148 err = pdata->setup(spi);
1149 if (err)
1150 goto out;
1151 }
1152
1153 /* Allocate card structure to represent this specific device */
1154 card = kzalloc(sizeof(struct if_spi_card), GFP_KERNEL);
1155 if (!card) {
1156 err = -ENOMEM;
1157 goto teardown;
1158 }
1159 spi_set_drvdata(spi, card);
1160 card->pdata = pdata;
1161 card->spi = spi;
1162 card->prev_xfer_time = jiffies;
1163
1164 INIT_LIST_HEAD(&card->cmd_packet_list);
1165 INIT_LIST_HEAD(&card->data_packet_list);
1166 spin_lock_init(&card->buffer_lock);
1167
1168 /* Initialize the SPI Interface Unit */
1169
1170 /* Firmware load */
1171 err = if_spi_init_card(card);
1172 if (err)
1173 goto free_card;
1174
1175 /*
1176 * Register our card with libertas.
1177 * This will call alloc_etherdev.
1178 */
1179 priv = lbs_add_card(card, &spi->dev);
1180 if (!priv) {
1181 err = -ENOMEM;
1182 goto free_card;
1183 }
1184 card->priv = priv;
1185 priv->setup_fw_on_resume = 1;
1186 priv->card = card;
1187 priv->hw_host_to_card = if_spi_host_to_card;
1188 priv->enter_deep_sleep = NULL;
1189 priv->exit_deep_sleep = NULL;
1190 priv->reset_deep_sleep_wakeup = NULL;
1191 priv->fw_ready = 1;
1192
1193 /* Initialize interrupt handling stuff. */
1194 card->workqueue = create_workqueue("libertas_spi");
1195 INIT_WORK(&card->packet_work, if_spi_host_to_card_worker);
1196 INIT_WORK(&card->resume_work, if_spi_resume_worker);
1197
1198 err = request_irq(spi->irq, if_spi_host_interrupt,
1199 IRQF_TRIGGER_FALLING, "libertas_spi", card);
1200 if (err) {
1201 pr_err("can't get host irq line-- request_irq failed\n");
1202 goto terminate_workqueue;
1203 }
1204
1205 /*
1206 * Start the card.
1207 * This will call register_netdev, and we'll start
1208 * getting interrupts...
1209 */
1210 err = lbs_start_card(priv);
1211 if (err)
1212 goto release_irq;
1213
1214 lbs_deb_spi("Finished initializing WLAN module.\n");
1215
1216 /* successful exit */
1217 goto out;
1218
1219 release_irq:
1220 free_irq(spi->irq, card);
1221 terminate_workqueue:
1222 flush_workqueue(card->workqueue);
1223 destroy_workqueue(card->workqueue);
1224 lbs_remove_card(priv); /* will call free_netdev */
1225 free_card:
1226 free_if_spi_card(card);
1227 teardown:
1228 if (pdata->teardown)
1229 pdata->teardown(spi);
1230 out:
1231 lbs_deb_leave_args(LBS_DEB_SPI, "err %d\n", err);
1232 return err;
1233 }
1234
1235 static int __devexit libertas_spi_remove(struct spi_device *spi)
1236 {
1237 struct if_spi_card *card = spi_get_drvdata(spi);
1238 struct lbs_private *priv = card->priv;
1239
1240 lbs_deb_spi("libertas_spi_remove\n");
1241 lbs_deb_enter(LBS_DEB_SPI);
1242
1243 cancel_work_sync(&card->resume_work);
1244
1245 lbs_stop_card(priv);
1246 lbs_remove_card(priv); /* will call free_netdev */
1247
1248 free_irq(spi->irq, card);
1249 flush_workqueue(card->workqueue);
1250 destroy_workqueue(card->workqueue);
1251 if (card->pdata->teardown)
1252 card->pdata->teardown(spi);
1253 free_if_spi_card(card);
1254 lbs_deb_leave(LBS_DEB_SPI);
1255 return 0;
1256 }
1257
1258 static int if_spi_suspend(struct device *dev)
1259 {
1260 struct spi_device *spi = to_spi_device(dev);
1261 struct if_spi_card *card = spi_get_drvdata(spi);
1262
1263 if (!card->suspended) {
1264 lbs_suspend(card->priv);
1265 flush_workqueue(card->workqueue);
1266 disable_irq(spi->irq);
1267
1268 if (card->pdata->teardown)
1269 card->pdata->teardown(spi);
1270 card->suspended = 1;
1271 }
1272
1273 return 0;
1274 }
1275
1276 static int if_spi_resume(struct device *dev)
1277 {
1278 struct spi_device *spi = to_spi_device(dev);
1279 struct if_spi_card *card = spi_get_drvdata(spi);
1280
1281 /* Schedule delayed work */
1282 schedule_work(&card->resume_work);
1283
1284 return 0;
1285 }
1286
1287 static const struct dev_pm_ops if_spi_pm_ops = {
1288 .suspend = if_spi_suspend,
1289 .resume = if_spi_resume,
1290 };
1291
1292 static struct spi_driver libertas_spi_driver = {
1293 .probe = if_spi_probe,
1294 .remove = __devexit_p(libertas_spi_remove),
1295 .driver = {
1296 .name = "libertas_spi",
1297 .bus = &spi_bus_type,
1298 .owner = THIS_MODULE,
1299 .pm = &if_spi_pm_ops,
1300 },
1301 };
1302
1303 /*
1304 * Module functions
1305 */
1306
1307 static int __init if_spi_init_module(void)
1308 {
1309 int ret = 0;
1310 lbs_deb_enter(LBS_DEB_SPI);
1311 printk(KERN_INFO "libertas_spi: Libertas SPI driver\n");
1312 ret = spi_register_driver(&libertas_spi_driver);
1313 lbs_deb_leave(LBS_DEB_SPI);
1314 return ret;
1315 }
1316
1317 static void __exit if_spi_exit_module(void)
1318 {
1319 lbs_deb_enter(LBS_DEB_SPI);
1320 spi_unregister_driver(&libertas_spi_driver);
1321 lbs_deb_leave(LBS_DEB_SPI);
1322 }
1323
1324 module_init(if_spi_init_module);
1325 module_exit(if_spi_exit_module);
1326
1327 MODULE_DESCRIPTION("Libertas SPI WLAN Driver");
1328 MODULE_AUTHOR("Andrey Yurovsky <andrey@cozybit.com>, "
1329 "Colin McCabe <colin@cozybit.com>");
1330 MODULE_LICENSE("GPL");
1331 MODULE_ALIAS("spi:libertas_spi");
Linux kernel - Deliverables
This page took 0.058516 seconds and 5 git commands to generate.