2 * Marvell Wireless LAN device driver: scan ioctl and command handling
4 * Copyright (C) 2011, Marvell International Ltd.
6 * This software file (the "File") is distributed by Marvell International
7 * Ltd. under the terms of the GNU General Public License Version 2, June 1991
8 * (the "License"). You may use, redistribute and/or modify this File in
9 * accordance with the terms and conditions of the License, a copy of which
10 * is available by writing to the Free Software Foundation, Inc.,
11 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
12 * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
14 * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
15 * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
16 * ARE EXPRESSLY DISCLAIMED. The License provides additional details about
17 * this warranty disclaimer.
28 /* The maximum number of channels the firmware can scan per command */
29 #define MWIFIEX_MAX_CHANNELS_PER_SPECIFIC_SCAN 14
31 #define MWIFIEX_DEF_CHANNELS_PER_SCAN_CMD 4
32 #define MWIFIEX_LIMIT_1_CHANNEL_PER_SCAN_CMD 15
33 #define MWIFIEX_LIMIT_2_CHANNELS_PER_SCAN_CMD 27
34 #define MWIFIEX_LIMIT_3_CHANNELS_PER_SCAN_CMD 35
36 /* Memory needed to store a max sized Channel List TLV for a firmware scan */
37 #define CHAN_TLV_MAX_SIZE (sizeof(struct mwifiex_ie_types_header) \
38 + (MWIFIEX_MAX_CHANNELS_PER_SPECIFIC_SCAN \
39 *sizeof(struct mwifiex_chan_scan_param_set)))
41 /* Memory needed to store supported rate */
42 #define RATE_TLV_MAX_SIZE (sizeof(struct mwifiex_ie_types_rates_param_set) \
43 + HOSTCMD_SUPPORTED_RATES)
45 /* Memory needed to store a max number/size WildCard SSID TLV for a firmware
47 #define WILDCARD_SSID_TLV_MAX_SIZE \
48 (MWIFIEX_MAX_SSID_LIST_LENGTH * \
49 (sizeof(struct mwifiex_ie_types_wildcard_ssid_params) \
50 + IEEE80211_MAX_SSID_LEN))
52 /* Maximum memory needed for a mwifiex_scan_cmd_config with all TLVs at max */
53 #define MAX_SCAN_CFG_ALLOC (sizeof(struct mwifiex_scan_cmd_config) \
54 + sizeof(struct mwifiex_ie_types_num_probes) \
55 + sizeof(struct mwifiex_ie_types_htcap) \
58 + WILDCARD_SSID_TLV_MAX_SIZE)
61 union mwifiex_scan_cmd_config_tlv
{
62 /* Scan configuration (variable length) */
63 struct mwifiex_scan_cmd_config config
;
64 /* Max allocated block */
65 u8 config_alloc_buf
[MAX_SCAN_CFG_ALLOC
];
73 static u8 mwifiex_wpa_oui
[CIPHER_SUITE_MAX
][4] = {
74 { 0x00, 0x50, 0xf2, 0x02 }, /* TKIP */
75 { 0x00, 0x50, 0xf2, 0x04 }, /* AES */
77 static u8 mwifiex_rsn_oui
[CIPHER_SUITE_MAX
][4] = {
78 { 0x00, 0x0f, 0xac, 0x02 }, /* TKIP */
79 { 0x00, 0x0f, 0xac, 0x04 }, /* AES */
83 * This function parses a given IE for a given OUI.
85 * This is used to parse a WPA/RSN IE to find if it has
89 mwifiex_search_oui_in_ie(struct ie_body
*iebody
, u8
*oui
)
93 count
= iebody
->ptk_cnt
[0];
95 /* There could be multiple OUIs for PTK hence
97 2) Check all the OUIs for AES.
98 3) If one of them is AES then pass success. */
100 if (!memcmp(iebody
->ptk_body
, oui
, sizeof(iebody
->ptk_body
)))
101 return MWIFIEX_OUI_PRESENT
;
105 iebody
= (struct ie_body
*) ((u8
*) iebody
+
106 sizeof(iebody
->ptk_body
));
109 pr_debug("info: %s: OUI is not found in PTK\n", __func__
);
110 return MWIFIEX_OUI_NOT_PRESENT
;
114 * This function checks if a given OUI is present in a RSN IE.
116 * The function first checks if a RSN IE is present or not in the
117 * BSS descriptor. It tries to locate the OUI only if such an IE is
121 mwifiex_is_rsn_oui_present(struct mwifiex_bssdescriptor
*bss_desc
, u32 cipher
)
124 struct ie_body
*iebody
;
125 u8 ret
= MWIFIEX_OUI_NOT_PRESENT
;
127 if (((bss_desc
->bcn_rsn_ie
) && ((*(bss_desc
->bcn_rsn_ie
)).
128 ieee_hdr
.element_id
== WLAN_EID_RSN
))) {
129 iebody
= (struct ie_body
*)
130 (((u8
*) bss_desc
->bcn_rsn_ie
->data
) +
132 oui
= &mwifiex_rsn_oui
[cipher
][0];
133 ret
= mwifiex_search_oui_in_ie(iebody
, oui
);
141 * This function checks if a given OUI is present in a WPA IE.
143 * The function first checks if a WPA IE is present or not in the
144 * BSS descriptor. It tries to locate the OUI only if such an IE is
148 mwifiex_is_wpa_oui_present(struct mwifiex_bssdescriptor
*bss_desc
, u32 cipher
)
151 struct ie_body
*iebody
;
152 u8 ret
= MWIFIEX_OUI_NOT_PRESENT
;
154 if (((bss_desc
->bcn_wpa_ie
) &&
155 ((*(bss_desc
->bcn_wpa_ie
)).vend_hdr
.element_id
==
156 WLAN_EID_VENDOR_SPECIFIC
))) {
157 iebody
= (struct ie_body
*) bss_desc
->bcn_wpa_ie
->data
;
158 oui
= &mwifiex_wpa_oui
[cipher
][0];
159 ret
= mwifiex_search_oui_in_ie(iebody
, oui
);
167 * This function compares two SSIDs and checks if they match.
170 mwifiex_ssid_cmp(struct cfg80211_ssid
*ssid1
, struct cfg80211_ssid
*ssid2
)
172 if (!ssid1
|| !ssid2
|| (ssid1
->ssid_len
!= ssid2
->ssid_len
))
174 return memcmp(ssid1
->ssid
, ssid2
->ssid
, ssid1
->ssid_len
);
178 * This function checks if wapi is enabled in driver and scanned network is
179 * compatible with it.
182 mwifiex_is_bss_wapi(struct mwifiex_private
*priv
,
183 struct mwifiex_bssdescriptor
*bss_desc
)
185 if (priv
->sec_info
.wapi_enabled
&&
186 (bss_desc
->bcn_wapi_ie
&&
187 ((*(bss_desc
->bcn_wapi_ie
)).ieee_hdr
.element_id
==
188 WLAN_EID_BSS_AC_ACCESS_DELAY
))) {
195 * This function checks if driver is configured with no security mode and
196 * scanned network is compatible with it.
199 mwifiex_is_bss_no_sec(struct mwifiex_private
*priv
,
200 struct mwifiex_bssdescriptor
*bss_desc
)
202 if (!priv
->sec_info
.wep_enabled
&& !priv
->sec_info
.wpa_enabled
&&
203 !priv
->sec_info
.wpa2_enabled
&& ((!bss_desc
->bcn_wpa_ie
) ||
204 ((*(bss_desc
->bcn_wpa_ie
)).vend_hdr
.element_id
!=
205 WLAN_EID_VENDOR_SPECIFIC
)) &&
206 ((!bss_desc
->bcn_rsn_ie
) ||
207 ((*(bss_desc
->bcn_rsn_ie
)).ieee_hdr
.element_id
!=
209 !priv
->sec_info
.encryption_mode
&& !bss_desc
->privacy
) {
216 * This function checks if static WEP is enabled in driver and scanned network
217 * is compatible with it.
220 mwifiex_is_bss_static_wep(struct mwifiex_private
*priv
,
221 struct mwifiex_bssdescriptor
*bss_desc
)
223 if (priv
->sec_info
.wep_enabled
&& !priv
->sec_info
.wpa_enabled
&&
224 !priv
->sec_info
.wpa2_enabled
&& bss_desc
->privacy
) {
231 * This function checks if wpa is enabled in driver and scanned network is
232 * compatible with it.
235 mwifiex_is_bss_wpa(struct mwifiex_private
*priv
,
236 struct mwifiex_bssdescriptor
*bss_desc
)
238 if (!priv
->sec_info
.wep_enabled
&& priv
->sec_info
.wpa_enabled
&&
239 !priv
->sec_info
.wpa2_enabled
&& ((bss_desc
->bcn_wpa_ie
) &&
240 ((*(bss_desc
->bcn_wpa_ie
)).
241 vend_hdr
.element_id
== WLAN_EID_VENDOR_SPECIFIC
))
243 * Privacy bit may NOT be set in some APs like
244 * LinkSys WRT54G && bss_desc->privacy
247 dev_dbg(priv
->adapter
->dev
, "info: %s: WPA:"
248 " wpa_ie=%#x wpa2_ie=%#x WEP=%s WPA=%s WPA2=%s "
249 "EncMode=%#x privacy=%#x\n", __func__
,
250 (bss_desc
->bcn_wpa_ie
) ?
251 (*(bss_desc
->bcn_wpa_ie
)).
252 vend_hdr
.element_id
: 0,
253 (bss_desc
->bcn_rsn_ie
) ?
254 (*(bss_desc
->bcn_rsn_ie
)).
255 ieee_hdr
.element_id
: 0,
256 (priv
->sec_info
.wep_enabled
) ? "e" : "d",
257 (priv
->sec_info
.wpa_enabled
) ? "e" : "d",
258 (priv
->sec_info
.wpa2_enabled
) ? "e" : "d",
259 priv
->sec_info
.encryption_mode
,
267 * This function checks if wpa2 is enabled in driver and scanned network is
268 * compatible with it.
271 mwifiex_is_bss_wpa2(struct mwifiex_private
*priv
,
272 struct mwifiex_bssdescriptor
*bss_desc
)
274 if (!priv
->sec_info
.wep_enabled
&&
275 !priv
->sec_info
.wpa_enabled
&&
276 priv
->sec_info
.wpa2_enabled
&&
277 ((bss_desc
->bcn_rsn_ie
) &&
278 ((*(bss_desc
->bcn_rsn_ie
)).ieee_hdr
.element_id
== WLAN_EID_RSN
))) {
280 * Privacy bit may NOT be set in some APs like
281 * LinkSys WRT54G && bss_desc->privacy
283 dev_dbg(priv
->adapter
->dev
, "info: %s: WPA2: "
284 " wpa_ie=%#x wpa2_ie=%#x WEP=%s WPA=%s WPA2=%s "
285 "EncMode=%#x privacy=%#x\n", __func__
,
286 (bss_desc
->bcn_wpa_ie
) ?
287 (*(bss_desc
->bcn_wpa_ie
)).
288 vend_hdr
.element_id
: 0,
289 (bss_desc
->bcn_rsn_ie
) ?
290 (*(bss_desc
->bcn_rsn_ie
)).
291 ieee_hdr
.element_id
: 0,
292 (priv
->sec_info
.wep_enabled
) ? "e" : "d",
293 (priv
->sec_info
.wpa_enabled
) ? "e" : "d",
294 (priv
->sec_info
.wpa2_enabled
) ? "e" : "d",
295 priv
->sec_info
.encryption_mode
,
303 * This function checks if adhoc AES is enabled in driver and scanned network is
304 * compatible with it.
307 mwifiex_is_bss_adhoc_aes(struct mwifiex_private
*priv
,
308 struct mwifiex_bssdescriptor
*bss_desc
)
310 if (!priv
->sec_info
.wep_enabled
&& !priv
->sec_info
.wpa_enabled
&&
311 !priv
->sec_info
.wpa2_enabled
&&
312 ((!bss_desc
->bcn_wpa_ie
) ||
313 ((*(bss_desc
->bcn_wpa_ie
)).
314 vend_hdr
.element_id
!= WLAN_EID_VENDOR_SPECIFIC
)) &&
315 ((!bss_desc
->bcn_rsn_ie
) ||
316 ((*(bss_desc
->bcn_rsn_ie
)).ieee_hdr
.element_id
!= WLAN_EID_RSN
)) &&
317 !priv
->sec_info
.encryption_mode
&& bss_desc
->privacy
) {
324 * This function checks if dynamic WEP is enabled in driver and scanned network
325 * is compatible with it.
328 mwifiex_is_bss_dynamic_wep(struct mwifiex_private
*priv
,
329 struct mwifiex_bssdescriptor
*bss_desc
)
331 if (!priv
->sec_info
.wep_enabled
&& !priv
->sec_info
.wpa_enabled
&&
332 !priv
->sec_info
.wpa2_enabled
&&
333 ((!bss_desc
->bcn_wpa_ie
) ||
334 ((*(bss_desc
->bcn_wpa_ie
)).
335 vend_hdr
.element_id
!= WLAN_EID_VENDOR_SPECIFIC
)) &&
336 ((!bss_desc
->bcn_rsn_ie
) ||
337 ((*(bss_desc
->bcn_rsn_ie
)).ieee_hdr
.element_id
!= WLAN_EID_RSN
)) &&
338 priv
->sec_info
.encryption_mode
&& bss_desc
->privacy
) {
339 dev_dbg(priv
->adapter
->dev
, "info: %s: dynamic "
340 "WEP: wpa_ie=%#x wpa2_ie=%#x "
341 "EncMode=%#x privacy=%#x\n",
343 (bss_desc
->bcn_wpa_ie
) ?
344 (*(bss_desc
->bcn_wpa_ie
)).
345 vend_hdr
.element_id
: 0,
346 (bss_desc
->bcn_rsn_ie
) ?
347 (*(bss_desc
->bcn_rsn_ie
)).
348 ieee_hdr
.element_id
: 0,
349 priv
->sec_info
.encryption_mode
,
357 * This function checks if a scanned network is compatible with the driver
360 * WEP WPA WPA2 ad-hoc encrypt Network
361 * enabled enabled enabled AES mode Privacy WPA WPA2 Compatible
362 * 0 0 0 0 NONE 0 0 0 yes No security
363 * 0 1 0 0 x 1x 1 x yes WPA (disable
365 * 0 0 1 0 x 1x x 1 yes WPA2 (disable
367 * 0 0 0 1 NONE 1 0 0 yes Ad-hoc AES
368 * 1 0 0 0 NONE 1 0 0 yes Static WEP
370 * 0 0 0 0 !=NONE 1 0 0 yes Dynamic WEP
372 * Compatibility is not matched while roaming, except for mode.
375 mwifiex_is_network_compatible(struct mwifiex_private
*priv
,
376 struct mwifiex_bssdescriptor
*bss_desc
, u32 mode
)
378 struct mwifiex_adapter
*adapter
= priv
->adapter
;
380 bss_desc
->disable_11n
= false;
382 /* Don't check for compatibility if roaming */
383 if (priv
->media_connected
&&
384 (priv
->bss_mode
== NL80211_IFTYPE_STATION
) &&
385 (bss_desc
->bss_mode
== NL80211_IFTYPE_STATION
))
388 if (priv
->wps
.session_enable
) {
389 dev_dbg(adapter
->dev
,
390 "info: return success directly in WPS period\n");
394 if (mwifiex_is_bss_wapi(priv
, bss_desc
)) {
395 dev_dbg(adapter
->dev
, "info: return success for WAPI AP\n");
399 if (bss_desc
->bss_mode
== mode
) {
400 if (mwifiex_is_bss_no_sec(priv
, bss_desc
)) {
403 } else if (mwifiex_is_bss_static_wep(priv
, bss_desc
)) {
404 /* Static WEP enabled */
405 dev_dbg(adapter
->dev
, "info: Disable 11n in WEP mode.\n");
406 bss_desc
->disable_11n
= true;
408 } else if (mwifiex_is_bss_wpa(priv
, bss_desc
)) {
410 if (((priv
->adapter
->config_bands
& BAND_GN
||
411 priv
->adapter
->config_bands
& BAND_AN
) &&
412 bss_desc
->bcn_ht_cap
) &&
413 !mwifiex_is_wpa_oui_present(bss_desc
,
414 CIPHER_SUITE_CCMP
)) {
416 if (mwifiex_is_wpa_oui_present
417 (bss_desc
, CIPHER_SUITE_TKIP
)) {
418 dev_dbg(adapter
->dev
,
419 "info: Disable 11n if AES "
420 "is not supported by AP\n");
421 bss_desc
->disable_11n
= true;
427 } else if (mwifiex_is_bss_wpa2(priv
, bss_desc
)) {
429 if (((priv
->adapter
->config_bands
& BAND_GN
||
430 priv
->adapter
->config_bands
& BAND_AN
) &&
431 bss_desc
->bcn_ht_cap
) &&
432 !mwifiex_is_rsn_oui_present(bss_desc
,
433 CIPHER_SUITE_CCMP
)) {
435 if (mwifiex_is_rsn_oui_present
436 (bss_desc
, CIPHER_SUITE_TKIP
)) {
437 dev_dbg(adapter
->dev
,
438 "info: Disable 11n if AES "
439 "is not supported by AP\n");
440 bss_desc
->disable_11n
= true;
446 } else if (mwifiex_is_bss_adhoc_aes(priv
, bss_desc
)) {
447 /* Ad-hoc AES enabled */
449 } else if (mwifiex_is_bss_dynamic_wep(priv
, bss_desc
)) {
450 /* Dynamic WEP enabled */
454 /* Security doesn't match */
455 dev_dbg(adapter
->dev
,
456 "info: %s: failed: wpa_ie=%#x wpa2_ie=%#x WEP=%s "
457 "WPA=%s WPA2=%s EncMode=%#x privacy=%#x\n", __func__
,
458 (bss_desc
->bcn_wpa_ie
) ?
459 (*(bss_desc
->bcn_wpa_ie
)).vend_hdr
.element_id
: 0,
460 (bss_desc
->bcn_rsn_ie
) ?
461 (*(bss_desc
->bcn_rsn_ie
)).ieee_hdr
.element_id
: 0,
462 (priv
->sec_info
.wep_enabled
) ? "e" : "d",
463 (priv
->sec_info
.wpa_enabled
) ? "e" : "d",
464 (priv
->sec_info
.wpa2_enabled
) ? "e" : "d",
465 priv
->sec_info
.encryption_mode
, bss_desc
->privacy
);
469 /* Mode doesn't match */
474 * This function creates a channel list for the driver to scan, based
475 * on region/band information.
477 * This routine is used for any scan that is not provided with a
478 * specific channel list to scan.
481 mwifiex_scan_create_channel_list(struct mwifiex_private
*priv
,
482 const struct mwifiex_user_scan_cfg
484 struct mwifiex_chan_scan_param_set
488 enum ieee80211_band band
;
489 struct ieee80211_supported_band
*sband
;
490 struct ieee80211_channel
*ch
;
491 struct mwifiex_adapter
*adapter
= priv
->adapter
;
494 for (band
= 0; (band
< IEEE80211_NUM_BANDS
) ; band
++) {
496 if (!priv
->wdev
->wiphy
->bands
[band
])
499 sband
= priv
->wdev
->wiphy
->bands
[band
];
501 for (i
= 0; (i
< sband
->n_channels
) ; i
++) {
502 ch
= &sband
->channels
[i
];
503 if (ch
->flags
& IEEE80211_CHAN_DISABLED
)
505 scan_chan_list
[chan_idx
].radio_type
= band
;
508 user_scan_in
->chan_list
[0].scan_time
)
509 scan_chan_list
[chan_idx
].max_scan_time
=
510 cpu_to_le16((u16
) user_scan_in
->
511 chan_list
[0].scan_time
);
512 else if (ch
->flags
& IEEE80211_CHAN_PASSIVE_SCAN
)
513 scan_chan_list
[chan_idx
].max_scan_time
=
514 cpu_to_le16(adapter
->passive_scan_time
);
516 scan_chan_list
[chan_idx
].max_scan_time
=
517 cpu_to_le16(adapter
->active_scan_time
);
519 if (ch
->flags
& IEEE80211_CHAN_PASSIVE_SCAN
)
520 scan_chan_list
[chan_idx
].chan_scan_mode_bitmap
521 |= MWIFIEX_PASSIVE_SCAN
;
523 scan_chan_list
[chan_idx
].chan_scan_mode_bitmap
524 &= ~MWIFIEX_PASSIVE_SCAN
;
525 scan_chan_list
[chan_idx
].chan_number
=
528 scan_chan_list
[chan_idx
].max_scan_time
=
529 cpu_to_le16(adapter
->specific_scan_time
);
530 scan_chan_list
[chan_idx
].chan_scan_mode_bitmap
531 |= MWIFIEX_DISABLE_CHAN_FILT
;
541 * This function constructs and sends multiple scan config commands to
544 * Previous routines in the code flow have created a scan command configuration
545 * with any requested TLVs. This function splits the channel TLV into maximum
546 * channels supported per scan lists and sends the portion of the channel TLV,
547 * along with the other TLVs, to the firmware.
550 mwifiex_scan_channel_list(struct mwifiex_private
*priv
,
551 u32 max_chan_per_scan
, u8 filtered_scan
,
552 struct mwifiex_scan_cmd_config
*scan_cfg_out
,
553 struct mwifiex_ie_types_chan_list_param_set
555 struct mwifiex_chan_scan_param_set
*scan_chan_list
)
558 struct mwifiex_chan_scan_param_set
*tmp_chan_list
;
559 struct mwifiex_chan_scan_param_set
*start_chan
;
565 if (!scan_cfg_out
|| !chan_tlv_out
|| !scan_chan_list
) {
566 dev_dbg(priv
->adapter
->dev
,
567 "info: Scan: Null detect: %p, %p, %p\n",
568 scan_cfg_out
, chan_tlv_out
, scan_chan_list
);
572 chan_tlv_out
->header
.type
= cpu_to_le16(TLV_TYPE_CHANLIST
);
574 /* Set the temp channel struct pointer to the start of the desired
576 tmp_chan_list
= scan_chan_list
;
578 /* Loop through the desired channel list, sending a new firmware scan
579 commands for each max_chan_per_scan channels (or for 1,6,11
580 individually if configured accordingly) */
581 while (tmp_chan_list
->chan_number
) {
585 chan_tlv_out
->header
.len
= 0;
586 start_chan
= tmp_chan_list
;
590 * Construct the Channel TLV for the scan command. Continue to
591 * insert channel TLVs until:
592 * - the tlv_idx hits the maximum configured per scan command
593 * - the next channel to insert is 0 (end of desired channel
595 * - done_early is set (controlling individual scanning of
598 while (tlv_idx
< max_chan_per_scan
&&
599 tmp_chan_list
->chan_number
&& !done_early
) {
601 dev_dbg(priv
->adapter
->dev
,
602 "info: Scan: Chan(%3d), Radio(%d),"
603 " Mode(%d, %d), Dur(%d)\n",
604 tmp_chan_list
->chan_number
,
605 tmp_chan_list
->radio_type
,
606 tmp_chan_list
->chan_scan_mode_bitmap
607 & MWIFIEX_PASSIVE_SCAN
,
608 (tmp_chan_list
->chan_scan_mode_bitmap
609 & MWIFIEX_DISABLE_CHAN_FILT
) >> 1,
610 le16_to_cpu(tmp_chan_list
->max_scan_time
));
612 /* Copy the current channel TLV to the command being
614 memcpy(chan_tlv_out
->chan_scan_param
+ tlv_idx
,
616 sizeof(chan_tlv_out
->chan_scan_param
));
618 /* Increment the TLV header length by the size
620 le16_add_cpu(&chan_tlv_out
->header
.len
,
621 sizeof(chan_tlv_out
->chan_scan_param
));
624 * The tlv buffer length is set to the number of bytes
625 * of the between the channel tlv pointer and the start
626 * of the tlv buffer. This compensates for any TLVs
627 * that were appended before the channel list.
629 scan_cfg_out
->tlv_buf_len
= (u32
) ((u8
*) chan_tlv_out
-
630 scan_cfg_out
->tlv_buf
);
632 /* Add the size of the channel tlv header and the data
634 scan_cfg_out
->tlv_buf_len
+=
635 (sizeof(chan_tlv_out
->header
)
636 + le16_to_cpu(chan_tlv_out
->header
.len
));
638 /* Increment the index to the channel tlv we are
642 /* Count the total scan time per command */
644 le16_to_cpu(tmp_chan_list
->max_scan_time
);
648 /* Stop the loop if the *current* channel is in the
649 1,6,11 set and we are not filtering on a BSSID
651 if (!filtered_scan
&&
652 (tmp_chan_list
->chan_number
== 1 ||
653 tmp_chan_list
->chan_number
== 6 ||
654 tmp_chan_list
->chan_number
== 11))
657 /* Increment the tmp pointer to the next channel to
661 /* Stop the loop if the *next* channel is in the 1,6,11
662 set. This will cause it to be the only channel
663 scanned on the next interation */
664 if (!filtered_scan
&&
665 (tmp_chan_list
->chan_number
== 1 ||
666 tmp_chan_list
->chan_number
== 6 ||
667 tmp_chan_list
->chan_number
== 11))
671 /* The total scan time should be less than scan command timeout
673 if (total_scan_time
> MWIFIEX_MAX_TOTAL_SCAN_TIME
) {
674 dev_err(priv
->adapter
->dev
, "total scan time %dms"
675 " is over limit (%dms), scan skipped\n",
676 total_scan_time
, MWIFIEX_MAX_TOTAL_SCAN_TIME
);
681 priv
->adapter
->scan_channels
= start_chan
;
683 /* Send the scan command to the firmware with the specified
685 ret
= mwifiex_send_cmd_async(priv
, HostCmd_CMD_802_11_SCAN
,
686 HostCmd_ACT_GEN_SET
, 0,
699 * This function constructs a scan command configuration structure to use
702 * Application layer or other functions can invoke network scanning
703 * with a scan configuration supplied in a user scan configuration structure.
704 * This structure is used as the basis of one or many scan command configuration
705 * commands that are sent to the command processing module and eventually to the
708 * This function creates a scan command configuration structure based on the
709 * following user supplied parameters (if present):
712 * - Number of Probes to be sent
715 * If the SSID or BSSID filter is not present, the filter is disabled/cleared.
716 * If the number of probes is not set, adapter default setting is used.
719 mwifiex_config_scan(struct mwifiex_private
*priv
,
720 const struct mwifiex_user_scan_cfg
*user_scan_in
,
721 struct mwifiex_scan_cmd_config
*scan_cfg_out
,
722 struct mwifiex_ie_types_chan_list_param_set
**chan_list_out
,
723 struct mwifiex_chan_scan_param_set
*scan_chan_list
,
724 u8
*max_chan_per_scan
, u8
*filtered_scan
,
725 u8
*scan_current_only
)
727 struct mwifiex_adapter
*adapter
= priv
->adapter
;
728 struct mwifiex_ie_types_num_probes
*num_probes_tlv
;
729 struct mwifiex_ie_types_wildcard_ssid_params
*wildcard_ssid_tlv
;
730 struct mwifiex_ie_types_rates_param_set
*rates_tlv
;
742 u8 rates
[MWIFIEX_SUPPORTED_RATES
];
744 struct mwifiex_ie_types_htcap
*ht_cap
;
746 /* The tlv_buf_len is calculated for each scan command. The TLVs added
747 in this routine will be preserved since the routine that sends the
748 command will append channelTLVs at *chan_list_out. The difference
749 between the *chan_list_out and the tlv_buf start will be used to
750 calculate the size of anything we add in this routine. */
751 scan_cfg_out
->tlv_buf_len
= 0;
753 /* Running tlv pointer. Assigned to chan_list_out at end of function
754 so later routines know where channels can be added to the command
756 tlv_pos
= scan_cfg_out
->tlv_buf
;
758 /* Initialize the scan as un-filtered; the flag is later set to TRUE
759 below if a SSID or BSSID filter is sent in the command */
760 *filtered_scan
= false;
762 /* Initialize the scan as not being only on the current channel. If
763 the channel list is customized, only contains one channel, and is
764 the active channel, this is set true and data flow is not halted. */
765 *scan_current_only
= false;
769 /* Default the ssid_filter flag to TRUE, set false under
770 certain wildcard conditions and qualified by the existence
771 of an SSID list before marking the scan as filtered */
774 /* Set the BSS type scan filter, use Adapter setting if
776 scan_cfg_out
->bss_mode
=
777 (user_scan_in
->bss_mode
? (u8
) user_scan_in
->
778 bss_mode
: (u8
) adapter
->scan_mode
);
780 /* Set the number of probes to send, use Adapter setting
783 (user_scan_in
->num_probes
? user_scan_in
->
784 num_probes
: adapter
->scan_probes
);
787 * Set the BSSID filter to the incoming configuration,
788 * if non-zero. If not set, it will remain disabled
791 memcpy(scan_cfg_out
->specific_bssid
,
792 user_scan_in
->specific_bssid
,
793 sizeof(scan_cfg_out
->specific_bssid
));
795 for (i
= 0; i
< user_scan_in
->num_ssids
; i
++) {
796 ssid_len
= user_scan_in
->ssid_list
[i
].ssid_len
;
799 (struct mwifiex_ie_types_wildcard_ssid_params
*)
801 wildcard_ssid_tlv
->header
.type
=
802 cpu_to_le16(TLV_TYPE_WILDCARDSSID
);
803 wildcard_ssid_tlv
->header
.len
= cpu_to_le16(
804 (u16
) (ssid_len
+ sizeof(wildcard_ssid_tlv
->
808 * max_ssid_length = 0 tells firmware to perform
809 * specific scan for the SSID filled, whereas
810 * max_ssid_length = IEEE80211_MAX_SSID_LEN is for
814 wildcard_ssid_tlv
->max_ssid_length
= 0;
816 wildcard_ssid_tlv
->max_ssid_length
=
817 IEEE80211_MAX_SSID_LEN
;
819 memcpy(wildcard_ssid_tlv
->ssid
,
820 user_scan_in
->ssid_list
[i
].ssid
, ssid_len
);
822 tlv_pos
+= (sizeof(wildcard_ssid_tlv
->header
)
823 + le16_to_cpu(wildcard_ssid_tlv
->header
.len
));
825 dev_dbg(adapter
->dev
, "info: scan: ssid[%d]: %s, %d\n",
826 i
, wildcard_ssid_tlv
->ssid
,
827 wildcard_ssid_tlv
->max_ssid_length
);
829 /* Empty wildcard ssid with a maxlen will match many or
830 potentially all SSIDs (maxlen == 32), therefore do
831 not treat the scan as
833 if (!ssid_len
&& wildcard_ssid_tlv
->max_ssid_length
)
838 * The default number of channels sent in the command is low to
839 * ensure the response buffer from the firmware does not
840 * truncate scan results. That is not an issue with an SSID
841 * or BSSID filter applied to the scan results in the firmware.
843 if ((i
&& ssid_filter
) ||
844 !is_zero_ether_addr(scan_cfg_out
->specific_bssid
))
845 *filtered_scan
= true;
847 scan_cfg_out
->bss_mode
= (u8
) adapter
->scan_mode
;
848 num_probes
= adapter
->scan_probes
;
852 * If a specific BSSID or SSID is used, the number of channels in the
853 * scan command will be increased to the absolute maximum.
856 *max_chan_per_scan
= MWIFIEX_MAX_CHANNELS_PER_SPECIFIC_SCAN
;
858 *max_chan_per_scan
= MWIFIEX_DEF_CHANNELS_PER_SCAN_CMD
;
860 /* If the input config or adapter has the number of Probes set,
864 dev_dbg(adapter
->dev
, "info: scan: num_probes = %d\n",
867 num_probes_tlv
= (struct mwifiex_ie_types_num_probes
*) tlv_pos
;
868 num_probes_tlv
->header
.type
= cpu_to_le16(TLV_TYPE_NUMPROBES
);
869 num_probes_tlv
->header
.len
=
870 cpu_to_le16(sizeof(num_probes_tlv
->num_probes
));
871 num_probes_tlv
->num_probes
= cpu_to_le16((u16
) num_probes
);
873 tlv_pos
+= sizeof(num_probes_tlv
->header
) +
874 le16_to_cpu(num_probes_tlv
->header
.len
);
878 /* Append rates tlv */
879 memset(rates
, 0, sizeof(rates
));
881 rates_size
= mwifiex_get_supported_rates(priv
, rates
);
883 rates_tlv
= (struct mwifiex_ie_types_rates_param_set
*) tlv_pos
;
884 rates_tlv
->header
.type
= cpu_to_le16(WLAN_EID_SUPP_RATES
);
885 rates_tlv
->header
.len
= cpu_to_le16((u16
) rates_size
);
886 memcpy(rates_tlv
->rates
, rates
, rates_size
);
887 tlv_pos
+= sizeof(rates_tlv
->header
) + rates_size
;
889 dev_dbg(adapter
->dev
, "info: SCAN_CMD: Rates size = %d\n", rates_size
);
891 if (ISSUPP_11NENABLED(priv
->adapter
->fw_cap_info
) &&
892 (priv
->adapter
->config_bands
& BAND_GN
||
893 priv
->adapter
->config_bands
& BAND_AN
)) {
894 ht_cap
= (struct mwifiex_ie_types_htcap
*) tlv_pos
;
895 memset(ht_cap
, 0, sizeof(struct mwifiex_ie_types_htcap
));
896 ht_cap
->header
.type
= cpu_to_le16(WLAN_EID_HT_CAPABILITY
);
898 cpu_to_le16(sizeof(struct ieee80211_ht_cap
));
900 mwifiex_band_to_radio_type(priv
->adapter
->config_bands
);
901 mwifiex_fill_cap_info(priv
, radio_type
, ht_cap
);
902 tlv_pos
+= sizeof(struct mwifiex_ie_types_htcap
);
905 /* Append vendor specific IE TLV */
906 mwifiex_cmd_append_vsie_tlv(priv
, MWIFIEX_VSIE_MASK_SCAN
, &tlv_pos
);
909 * Set the output for the channel TLV to the address in the tlv buffer
910 * past any TLVs that were added in this function (SSID, num_probes).
911 * Channel TLVs will be added past this for each scan command,
912 * preserving the TLVs that were previously added.
915 (struct mwifiex_ie_types_chan_list_param_set
*) tlv_pos
;
917 if (user_scan_in
&& user_scan_in
->chan_list
[0].chan_number
) {
919 dev_dbg(adapter
->dev
, "info: Scan: Using supplied channel list\n");
922 chan_idx
< MWIFIEX_USER_SCAN_CHAN_MAX
&&
923 user_scan_in
->chan_list
[chan_idx
].chan_number
;
926 channel
= user_scan_in
->chan_list
[chan_idx
].chan_number
;
927 (scan_chan_list
+ chan_idx
)->chan_number
= channel
;
930 user_scan_in
->chan_list
[chan_idx
].radio_type
;
931 (scan_chan_list
+ chan_idx
)->radio_type
= radio_type
;
933 scan_type
= user_scan_in
->chan_list
[chan_idx
].scan_type
;
935 if (scan_type
== MWIFIEX_SCAN_TYPE_PASSIVE
)
937 chan_idx
)->chan_scan_mode_bitmap
938 |= MWIFIEX_PASSIVE_SCAN
;
941 chan_idx
)->chan_scan_mode_bitmap
942 &= ~MWIFIEX_PASSIVE_SCAN
;
946 chan_idx
)->chan_scan_mode_bitmap
947 |= MWIFIEX_DISABLE_CHAN_FILT
;
949 if (user_scan_in
->chan_list
[chan_idx
].scan_time
) {
950 scan_dur
= (u16
) user_scan_in
->
951 chan_list
[chan_idx
].scan_time
;
953 if (scan_type
== MWIFIEX_SCAN_TYPE_PASSIVE
)
954 scan_dur
= adapter
->passive_scan_time
;
955 else if (*filtered_scan
)
956 scan_dur
= adapter
->specific_scan_time
;
958 scan_dur
= adapter
->active_scan_time
;
961 (scan_chan_list
+ chan_idx
)->min_scan_time
=
962 cpu_to_le16(scan_dur
);
963 (scan_chan_list
+ chan_idx
)->max_scan_time
=
964 cpu_to_le16(scan_dur
);
967 /* Check if we are only scanning the current channel */
968 if ((chan_idx
== 1) &&
969 (user_scan_in
->chan_list
[0].chan_number
==
970 priv
->curr_bss_params
.bss_descriptor
.channel
)) {
971 *scan_current_only
= true;
972 dev_dbg(adapter
->dev
,
973 "info: Scan: Scanning current channel only\n");
977 dev_dbg(adapter
->dev
,
978 "info: Scan: Creating full region channel list\n");
979 chan_num
= mwifiex_scan_create_channel_list(priv
, user_scan_in
,
985 * In associated state we will reduce the number of channels scanned per
986 * scan command to avoid any traffic delay/loss. This number is decided
987 * based on total number of channels to be scanned due to constraints
988 * of command buffers.
990 if (priv
->media_connected
) {
991 if (chan_num
< MWIFIEX_LIMIT_1_CHANNEL_PER_SCAN_CMD
)
992 *max_chan_per_scan
= 1;
993 else if (chan_num
< MWIFIEX_LIMIT_2_CHANNELS_PER_SCAN_CMD
)
994 *max_chan_per_scan
= 2;
995 else if (chan_num
< MWIFIEX_LIMIT_3_CHANNELS_PER_SCAN_CMD
)
996 *max_chan_per_scan
= 3;
998 *max_chan_per_scan
= 4;
1003 * This function inspects the scan response buffer for pointers to
1006 * TLVs can be included at the end of the scan response BSS information.
1008 * Data in the buffer is parsed pointers to TLVs that can potentially
1009 * be passed back in the response.
1012 mwifiex_ret_802_11_scan_get_tlv_ptrs(struct mwifiex_adapter
*adapter
,
1013 struct mwifiex_ie_types_data
*tlv
,
1014 u32 tlv_buf_size
, u32 req_tlv_type
,
1015 struct mwifiex_ie_types_data
**tlv_data
)
1017 struct mwifiex_ie_types_data
*current_tlv
;
1023 tlv_buf_left
= tlv_buf_size
;
1026 dev_dbg(adapter
->dev
, "info: SCAN_RESP: tlv_buf_size = %d\n",
1029 while (tlv_buf_left
>= sizeof(struct mwifiex_ie_types_header
)) {
1031 tlv_type
= le16_to_cpu(current_tlv
->header
.type
);
1032 tlv_len
= le16_to_cpu(current_tlv
->header
.len
);
1034 if (sizeof(tlv
->header
) + tlv_len
> tlv_buf_left
) {
1035 dev_err(adapter
->dev
, "SCAN_RESP: TLV buffer corrupt\n");
1039 if (req_tlv_type
== tlv_type
) {
1041 case TLV_TYPE_TSFTIMESTAMP
:
1042 dev_dbg(adapter
->dev
, "info: SCAN_RESP: TSF "
1043 "timestamp TLV, len = %d\n", tlv_len
);
1044 *tlv_data
= current_tlv
;
1046 case TLV_TYPE_CHANNELBANDLIST
:
1047 dev_dbg(adapter
->dev
, "info: SCAN_RESP: channel"
1048 " band list TLV, len = %d\n", tlv_len
);
1049 *tlv_data
= current_tlv
;
1052 dev_err(adapter
->dev
,
1053 "SCAN_RESP: unhandled TLV = %d\n",
1055 /* Give up, this seems corrupted */
1064 tlv_buf_left
-= (sizeof(tlv
->header
) + tlv_len
);
1066 (struct mwifiex_ie_types_data
*) (current_tlv
->data
+
1073 * This function parses provided beacon buffer and updates
1074 * respective fields in bss descriptor structure.
1076 int mwifiex_update_bss_desc_with_ie(struct mwifiex_adapter
*adapter
,
1077 struct mwifiex_bssdescriptor
*bss_entry
)
1081 struct ieee_types_fh_param_set
*fh_param_set
;
1082 struct ieee_types_ds_param_set
*ds_param_set
;
1083 struct ieee_types_cf_param_set
*cf_param_set
;
1084 struct ieee_types_ibss_param_set
*ibss_param_set
;
1091 u8 found_data_rate_ie
;
1093 struct ieee_types_vendor_specific
*vendor_ie
;
1094 const u8 wpa_oui
[4] = { 0x00, 0x50, 0xf2, 0x01 };
1095 const u8 wmm_oui
[4] = { 0x00, 0x50, 0xf2, 0x02 };
1097 found_data_rate_ie
= false;
1099 current_ptr
= bss_entry
->beacon_buf
;
1100 bytes_left
= bss_entry
->beacon_buf_size
;
1102 /* Process variable IE */
1103 while (bytes_left
>= 2) {
1104 element_id
= *current_ptr
;
1105 element_len
= *(current_ptr
+ 1);
1106 total_ie_len
= element_len
+ sizeof(struct ieee_types_header
);
1108 if (bytes_left
< total_ie_len
) {
1109 dev_err(adapter
->dev
, "err: InterpretIE: in processing"
1110 " IE, bytes left < IE length\n");
1113 switch (element_id
) {
1115 bss_entry
->ssid
.ssid_len
= element_len
;
1116 memcpy(bss_entry
->ssid
.ssid
, (current_ptr
+ 2),
1118 dev_dbg(adapter
->dev
,
1119 "info: InterpretIE: ssid: %-32s\n",
1120 bss_entry
->ssid
.ssid
);
1123 case WLAN_EID_SUPP_RATES
:
1124 memcpy(bss_entry
->data_rates
, current_ptr
+ 2,
1126 memcpy(bss_entry
->supported_rates
, current_ptr
+ 2,
1128 rate_size
= element_len
;
1129 found_data_rate_ie
= true;
1132 case WLAN_EID_FH_PARAMS
:
1134 (struct ieee_types_fh_param_set
*) current_ptr
;
1135 memcpy(&bss_entry
->phy_param_set
.fh_param_set
,
1137 sizeof(struct ieee_types_fh_param_set
));
1140 case WLAN_EID_DS_PARAMS
:
1142 (struct ieee_types_ds_param_set
*) current_ptr
;
1144 bss_entry
->channel
= ds_param_set
->current_chan
;
1146 memcpy(&bss_entry
->phy_param_set
.ds_param_set
,
1148 sizeof(struct ieee_types_ds_param_set
));
1151 case WLAN_EID_CF_PARAMS
:
1153 (struct ieee_types_cf_param_set
*) current_ptr
;
1154 memcpy(&bss_entry
->ss_param_set
.cf_param_set
,
1156 sizeof(struct ieee_types_cf_param_set
));
1159 case WLAN_EID_IBSS_PARAMS
:
1161 (struct ieee_types_ibss_param_set
*)
1163 memcpy(&bss_entry
->ss_param_set
.ibss_param_set
,
1165 sizeof(struct ieee_types_ibss_param_set
));
1168 case WLAN_EID_ERP_INFO
:
1169 bss_entry
->erp_flags
= *(current_ptr
+ 2);
1172 case WLAN_EID_EXT_SUPP_RATES
:
1174 * Only process extended supported rate
1175 * if data rate is already found.
1176 * Data rate IE should come before
1177 * extended supported rate IE
1179 if (found_data_rate_ie
) {
1180 if ((element_len
+ rate_size
) >
1181 MWIFIEX_SUPPORTED_RATES
)
1183 (MWIFIEX_SUPPORTED_RATES
-
1186 bytes_to_copy
= element_len
;
1188 rate
= (u8
*) bss_entry
->data_rates
;
1190 memcpy(rate
, current_ptr
+ 2, bytes_to_copy
);
1192 rate
= (u8
*) bss_entry
->supported_rates
;
1194 memcpy(rate
, current_ptr
+ 2, bytes_to_copy
);
1198 case WLAN_EID_VENDOR_SPECIFIC
:
1199 vendor_ie
= (struct ieee_types_vendor_specific
*)
1203 (vendor_ie
->vend_hdr
.oui
, wpa_oui
,
1205 bss_entry
->bcn_wpa_ie
=
1206 (struct ieee_types_vendor_specific
*)
1208 bss_entry
->wpa_offset
= (u16
)
1209 (current_ptr
- bss_entry
->beacon_buf
);
1210 } else if (!memcmp(vendor_ie
->vend_hdr
.oui
, wmm_oui
,
1213 sizeof(struct ieee_types_wmm_parameter
) ||
1215 sizeof(struct ieee_types_wmm_info
))
1217 * Only accept and copy the WMM IE if
1218 * it matches the size expected for the
1219 * WMM Info IE or the WMM Parameter IE.
1221 memcpy((u8
*) &bss_entry
->wmm_ie
,
1222 current_ptr
, total_ie_len
);
1226 bss_entry
->bcn_rsn_ie
=
1227 (struct ieee_types_generic
*) current_ptr
;
1228 bss_entry
->rsn_offset
= (u16
) (current_ptr
-
1229 bss_entry
->beacon_buf
);
1231 case WLAN_EID_BSS_AC_ACCESS_DELAY
:
1232 bss_entry
->bcn_wapi_ie
=
1233 (struct ieee_types_generic
*) current_ptr
;
1234 bss_entry
->wapi_offset
= (u16
) (current_ptr
-
1235 bss_entry
->beacon_buf
);
1237 case WLAN_EID_HT_CAPABILITY
:
1238 bss_entry
->bcn_ht_cap
= (struct ieee80211_ht_cap
*)
1240 sizeof(struct ieee_types_header
));
1241 bss_entry
->ht_cap_offset
= (u16
) (current_ptr
+
1242 sizeof(struct ieee_types_header
) -
1243 bss_entry
->beacon_buf
);
1245 case WLAN_EID_HT_OPERATION
:
1246 bss_entry
->bcn_ht_oper
=
1247 (struct ieee80211_ht_operation
*)(current_ptr
+
1248 sizeof(struct ieee_types_header
));
1249 bss_entry
->ht_info_offset
= (u16
) (current_ptr
+
1250 sizeof(struct ieee_types_header
) -
1251 bss_entry
->beacon_buf
);
1253 case WLAN_EID_BSS_COEX_2040
:
1254 bss_entry
->bcn_bss_co_2040
= current_ptr
+
1255 sizeof(struct ieee_types_header
);
1256 bss_entry
->bss_co_2040_offset
= (u16
) (current_ptr
+
1257 sizeof(struct ieee_types_header
) -
1258 bss_entry
->beacon_buf
);
1260 case WLAN_EID_EXT_CAPABILITY
:
1261 bss_entry
->bcn_ext_cap
= current_ptr
+
1262 sizeof(struct ieee_types_header
);
1263 bss_entry
->ext_cap_offset
= (u16
) (current_ptr
+
1264 sizeof(struct ieee_types_header
) -
1265 bss_entry
->beacon_buf
);
1271 current_ptr
+= element_len
+ 2;
1273 /* Need to account for IE ID and IE Len */
1274 bytes_left
-= (element_len
+ 2);
1276 } /* while (bytes_left > 2) */
1281 * This function converts radio type scan parameter to a band configuration
1282 * to be used in join command.
1285 mwifiex_radio_type_to_band(u8 radio_type
)
1287 switch (radio_type
) {
1288 case HostCmd_SCAN_RADIO_TYPE_A
:
1290 case HostCmd_SCAN_RADIO_TYPE_BG
:
1297 * This is an internal function used to start a scan based on an input
1300 * This uses the input user scan configuration information when provided in
1301 * order to send the appropriate scan commands to firmware to populate or
1302 * update the internal driver scan table.
1304 int mwifiex_scan_networks(struct mwifiex_private
*priv
,
1305 const struct mwifiex_user_scan_cfg
*user_scan_in
)
1308 struct mwifiex_adapter
*adapter
= priv
->adapter
;
1309 struct cmd_ctrl_node
*cmd_node
;
1310 union mwifiex_scan_cmd_config_tlv
*scan_cfg_out
;
1311 struct mwifiex_ie_types_chan_list_param_set
*chan_list_out
;
1313 struct mwifiex_chan_scan_param_set
*scan_chan_list
;
1315 u8 scan_current_chan_only
;
1316 u8 max_chan_per_scan
;
1317 unsigned long flags
;
1319 if (adapter
->scan_processing
) {
1320 dev_err(adapter
->dev
, "cmd: Scan already in process...\n");
1324 if (priv
->scan_block
) {
1325 dev_err(adapter
->dev
,
1326 "cmd: Scan is blocked during association...\n");
1330 spin_lock_irqsave(&adapter
->mwifiex_cmd_lock
, flags
);
1331 adapter
->scan_processing
= true;
1332 spin_unlock_irqrestore(&adapter
->mwifiex_cmd_lock
, flags
);
1334 scan_cfg_out
= kzalloc(sizeof(union mwifiex_scan_cmd_config_tlv
),
1336 if (!scan_cfg_out
) {
1337 dev_err(adapter
->dev
, "failed to alloc scan_cfg_out\n");
1342 buf_size
= sizeof(struct mwifiex_chan_scan_param_set
) *
1343 MWIFIEX_USER_SCAN_CHAN_MAX
;
1344 scan_chan_list
= kzalloc(buf_size
, GFP_KERNEL
);
1345 if (!scan_chan_list
) {
1346 dev_err(adapter
->dev
, "failed to alloc scan_chan_list\n");
1347 kfree(scan_cfg_out
);
1352 mwifiex_config_scan(priv
, user_scan_in
, &scan_cfg_out
->config
,
1353 &chan_list_out
, scan_chan_list
, &max_chan_per_scan
,
1354 &filtered_scan
, &scan_current_chan_only
);
1356 ret
= mwifiex_scan_channel_list(priv
, max_chan_per_scan
, filtered_scan
,
1357 &scan_cfg_out
->config
, chan_list_out
,
1360 /* Get scan command from scan_pending_q and put to cmd_pending_q */
1362 spin_lock_irqsave(&adapter
->scan_pending_q_lock
, flags
);
1363 if (!list_empty(&adapter
->scan_pending_q
)) {
1364 cmd_node
= list_first_entry(&adapter
->scan_pending_q
,
1365 struct cmd_ctrl_node
, list
);
1366 list_del(&cmd_node
->list
);
1367 spin_unlock_irqrestore(&adapter
->scan_pending_q_lock
,
1369 adapter
->cmd_queued
= cmd_node
;
1370 mwifiex_insert_cmd_to_pending_q(adapter
, cmd_node
,
1372 queue_work(adapter
->workqueue
, &adapter
->main_work
);
1374 spin_unlock_irqrestore(&adapter
->scan_pending_q_lock
,
1379 kfree(scan_cfg_out
);
1380 kfree(scan_chan_list
);
1383 spin_lock_irqsave(&adapter
->mwifiex_cmd_lock
, flags
);
1384 adapter
->scan_processing
= false;
1385 spin_unlock_irqrestore(&adapter
->mwifiex_cmd_lock
, flags
);
1391 * This function prepares a scan command to be sent to the firmware.
1393 * This uses the scan command configuration sent to the command processing
1394 * module in command preparation stage to configure a scan command structure
1395 * to send to firmware.
1397 * The fixed fields specifying the BSS type and BSSID filters as well as a
1398 * variable number/length of TLVs are sent in the command to firmware.
1400 * Preparation also includes -
1401 * - Setting command ID, and proper size
1402 * - Ensuring correct endian-ness
1404 int mwifiex_cmd_802_11_scan(struct host_cmd_ds_command
*cmd
,
1405 struct mwifiex_scan_cmd_config
*scan_cfg
)
1407 struct host_cmd_ds_802_11_scan
*scan_cmd
= &cmd
->params
.scan
;
1409 /* Set fixed field variables in scan command */
1410 scan_cmd
->bss_mode
= scan_cfg
->bss_mode
;
1411 memcpy(scan_cmd
->bssid
, scan_cfg
->specific_bssid
,
1412 sizeof(scan_cmd
->bssid
));
1413 memcpy(scan_cmd
->tlv_buffer
, scan_cfg
->tlv_buf
, scan_cfg
->tlv_buf_len
);
1415 cmd
->command
= cpu_to_le16(HostCmd_CMD_802_11_SCAN
);
1417 /* Size is equal to the sizeof(fixed portions) + the TLV len + header */
1418 cmd
->size
= cpu_to_le16((u16
) (sizeof(scan_cmd
->bss_mode
)
1419 + sizeof(scan_cmd
->bssid
)
1420 + scan_cfg
->tlv_buf_len
+ S_DS_GEN
));
1426 * This function checks compatibility of requested network with current
1429 int mwifiex_check_network_compatibility(struct mwifiex_private
*priv
,
1430 struct mwifiex_bssdescriptor
*bss_desc
)
1437 if ((mwifiex_get_cfp(priv
, (u8
) bss_desc
->bss_band
,
1438 (u16
) bss_desc
->channel
, 0))) {
1439 switch (priv
->bss_mode
) {
1440 case NL80211_IFTYPE_STATION
:
1441 case NL80211_IFTYPE_ADHOC
:
1442 ret
= mwifiex_is_network_compatible(priv
, bss_desc
,
1445 dev_err(priv
->adapter
->dev
,
1446 "Incompatible network settings\n");
1456 static int mwifiex_update_curr_bss_params(struct mwifiex_private
*priv
,
1457 struct cfg80211_bss
*bss
)
1459 struct mwifiex_bssdescriptor
*bss_desc
;
1461 unsigned long flags
;
1463 /* Allocate and fill new bss descriptor */
1464 bss_desc
= kzalloc(sizeof(struct mwifiex_bssdescriptor
),
1467 dev_err(priv
->adapter
->dev
, " failed to alloc bss_desc\n");
1471 ret
= mwifiex_fill_new_bss_desc(priv
, bss
, bss_desc
);
1475 ret
= mwifiex_check_network_compatibility(priv
, bss_desc
);
1479 /* Update current bss descriptor parameters */
1480 spin_lock_irqsave(&priv
->curr_bcn_buf_lock
, flags
);
1481 priv
->curr_bss_params
.bss_descriptor
.bcn_wpa_ie
= NULL
;
1482 priv
->curr_bss_params
.bss_descriptor
.wpa_offset
= 0;
1483 priv
->curr_bss_params
.bss_descriptor
.bcn_rsn_ie
= NULL
;
1484 priv
->curr_bss_params
.bss_descriptor
.rsn_offset
= 0;
1485 priv
->curr_bss_params
.bss_descriptor
.bcn_wapi_ie
= NULL
;
1486 priv
->curr_bss_params
.bss_descriptor
.wapi_offset
= 0;
1487 priv
->curr_bss_params
.bss_descriptor
.bcn_ht_cap
= NULL
;
1488 priv
->curr_bss_params
.bss_descriptor
.ht_cap_offset
=
1490 priv
->curr_bss_params
.bss_descriptor
.bcn_ht_oper
= NULL
;
1491 priv
->curr_bss_params
.bss_descriptor
.ht_info_offset
=
1493 priv
->curr_bss_params
.bss_descriptor
.bcn_bss_co_2040
=
1495 priv
->curr_bss_params
.bss_descriptor
.
1496 bss_co_2040_offset
= 0;
1497 priv
->curr_bss_params
.bss_descriptor
.bcn_ext_cap
= NULL
;
1498 priv
->curr_bss_params
.bss_descriptor
.ext_cap_offset
= 0;
1499 priv
->curr_bss_params
.bss_descriptor
.beacon_buf
= NULL
;
1500 priv
->curr_bss_params
.bss_descriptor
.beacon_buf_size
=
1503 /* Make a copy of current BSSID descriptor */
1504 memcpy(&priv
->curr_bss_params
.bss_descriptor
, bss_desc
,
1505 sizeof(priv
->curr_bss_params
.bss_descriptor
));
1506 mwifiex_save_curr_bcn(priv
);
1507 spin_unlock_irqrestore(&priv
->curr_bcn_buf_lock
, flags
);
1515 * This function handles the command response of scan.
1517 * The response buffer for the scan command has the following
1520 * .-------------------------------------------------------------.
1521 * | Header (4 * sizeof(t_u16)): Standard command response hdr |
1522 * .-------------------------------------------------------------.
1523 * | BufSize (t_u16) : sizeof the BSS Description data |
1524 * .-------------------------------------------------------------.
1525 * | NumOfSet (t_u8) : Number of BSS Descs returned |
1526 * .-------------------------------------------------------------.
1527 * | BSSDescription data (variable, size given in BufSize) |
1528 * .-------------------------------------------------------------.
1529 * | TLV data (variable, size calculated using Header->Size, |
1530 * | BufSize and sizeof the fixed fields above) |
1531 * .-------------------------------------------------------------.
1533 int mwifiex_ret_802_11_scan(struct mwifiex_private
*priv
,
1534 struct host_cmd_ds_command
*resp
)
1537 struct mwifiex_adapter
*adapter
= priv
->adapter
;
1538 struct cmd_ctrl_node
*cmd_node
;
1539 struct host_cmd_ds_802_11_scan_rsp
*scan_rsp
;
1540 struct mwifiex_ie_types_data
*tlv_data
;
1541 struct mwifiex_ie_types_tsf_timestamp
*tsf_tlv
;
1547 struct mwifiex_chan_freq_power
*cfp
;
1548 struct mwifiex_ie_types_chan_band_list_param_set
*chan_band_tlv
;
1549 struct chan_band_param_set
*chan_band
;
1551 unsigned long flags
;
1552 struct cfg80211_bss
*bss
;
1554 is_bgscan_resp
= (le16_to_cpu(resp
->command
)
1555 == HostCmd_CMD_802_11_BG_SCAN_QUERY
);
1557 scan_rsp
= &resp
->params
.bg_scan_query_resp
.scan_resp
;
1559 scan_rsp
= &resp
->params
.scan_resp
;
1562 if (scan_rsp
->number_of_sets
> MWIFIEX_MAX_AP
) {
1563 dev_err(adapter
->dev
, "SCAN_RESP: too many AP returned (%d)\n",
1564 scan_rsp
->number_of_sets
);
1569 bytes_left
= le16_to_cpu(scan_rsp
->bss_descript_size
);
1570 dev_dbg(adapter
->dev
, "info: SCAN_RESP: bss_descript_size %d\n",
1573 scan_resp_size
= le16_to_cpu(resp
->size
);
1575 dev_dbg(adapter
->dev
,
1576 "info: SCAN_RESP: returned %d APs before parsing\n",
1577 scan_rsp
->number_of_sets
);
1579 bss_info
= scan_rsp
->bss_desc_and_tlv_buffer
;
1582 * The size of the TLV buffer is equal to the entire command response
1583 * size (scan_resp_size) minus the fixed fields (sizeof()'s), the
1584 * BSS Descriptions (bss_descript_size as bytesLef) and the command
1585 * response header (S_DS_GEN)
1587 tlv_buf_size
= scan_resp_size
- (bytes_left
1588 + sizeof(scan_rsp
->bss_descript_size
)
1589 + sizeof(scan_rsp
->number_of_sets
)
1592 tlv_data
= (struct mwifiex_ie_types_data
*) (scan_rsp
->
1593 bss_desc_and_tlv_buffer
+
1596 /* Search the TLV buffer space in the scan response for any valid
1598 mwifiex_ret_802_11_scan_get_tlv_ptrs(adapter
, tlv_data
, tlv_buf_size
,
1599 TLV_TYPE_TSFTIMESTAMP
,
1600 (struct mwifiex_ie_types_data
**)
1603 /* Search the TLV buffer space in the scan response for any valid
1605 mwifiex_ret_802_11_scan_get_tlv_ptrs(adapter
, tlv_data
, tlv_buf_size
,
1606 TLV_TYPE_CHANNELBANDLIST
,
1607 (struct mwifiex_ie_types_data
**)
1610 for (idx
= 0; idx
< scan_rsp
->number_of_sets
&& bytes_left
; idx
++) {
1617 u16 beacon_size
= 0;
1621 u16 cap_info_bitmap
;
1624 struct mwifiex_bcn_param
*bcn_param
;
1625 struct mwifiex_bss_priv
*bss_priv
;
1627 if (bytes_left
>= sizeof(beacon_size
)) {
1628 /* Extract & convert beacon size from command buffer */
1629 memcpy(&beacon_size
, bss_info
, sizeof(beacon_size
));
1630 bytes_left
-= sizeof(beacon_size
);
1631 bss_info
+= sizeof(beacon_size
);
1634 if (!beacon_size
|| beacon_size
> bytes_left
) {
1635 bss_info
+= bytes_left
;
1640 /* Initialize the current working beacon pointer for this BSS
1642 current_ptr
= bss_info
;
1644 /* Advance the return beacon pointer past the current beacon */
1645 bss_info
+= beacon_size
;
1646 bytes_left
-= beacon_size
;
1648 curr_bcn_bytes
= beacon_size
;
1651 * First 5 fields are bssid, RSSI, time stamp, beacon interval,
1652 * and capability information
1654 if (curr_bcn_bytes
< sizeof(struct mwifiex_bcn_param
)) {
1655 dev_err(adapter
->dev
,
1656 "InterpretIE: not enough bytes left\n");
1659 bcn_param
= (struct mwifiex_bcn_param
*)current_ptr
;
1660 current_ptr
+= sizeof(*bcn_param
);
1661 curr_bcn_bytes
-= sizeof(*bcn_param
);
1663 memcpy(bssid
, bcn_param
->bssid
, ETH_ALEN
);
1665 rssi
= (s32
) bcn_param
->rssi
;
1666 rssi
= (-rssi
) * 100; /* Convert dBm to mBm */
1667 dev_dbg(adapter
->dev
, "info: InterpretIE: RSSI=%d\n", rssi
);
1669 timestamp
= le64_to_cpu(bcn_param
->timestamp
);
1670 beacon_period
= le16_to_cpu(bcn_param
->beacon_period
);
1672 cap_info_bitmap
= le16_to_cpu(bcn_param
->cap_info_bitmap
);
1673 dev_dbg(adapter
->dev
, "info: InterpretIE: capabilities=0x%X\n",
1676 /* Rest of the current buffer are IE's */
1677 ie_buf
= current_ptr
;
1678 ie_len
= curr_bcn_bytes
;
1679 dev_dbg(adapter
->dev
,
1680 "info: InterpretIE: IELength for this AP = %d\n",
1683 while (curr_bcn_bytes
>= sizeof(struct ieee_types_header
)) {
1684 u8 element_id
, element_len
;
1686 element_id
= *current_ptr
;
1687 element_len
= *(current_ptr
+ 1);
1688 if (curr_bcn_bytes
< element_len
+
1689 sizeof(struct ieee_types_header
)) {
1690 dev_err(priv
->adapter
->dev
,
1691 "%s: bytes left < IE length\n",
1695 if (element_id
== WLAN_EID_DS_PARAMS
) {
1696 channel
= *(current_ptr
+ sizeof(struct ieee_types_header
));
1700 current_ptr
+= element_len
+
1701 sizeof(struct ieee_types_header
);
1702 curr_bcn_bytes
-= element_len
+
1703 sizeof(struct ieee_types_header
);
1707 * If the TSF TLV was appended to the scan results, save this
1708 * entry's TSF value in the fw_tsf field. It is the firmware's
1709 * TSF value at the time the beacon or probe response was
1713 memcpy(&fw_tsf
, &tsf_tlv
->tsf_data
[idx
* TSF_DATA_SIZE
],
1717 struct ieee80211_channel
*chan
;
1721 if (chan_band_tlv
) {
1723 &chan_band_tlv
->chan_band_param
[idx
];
1724 band
= mwifiex_radio_type_to_band(
1725 chan_band
->radio_type
1726 & (BIT(0) | BIT(1)));
1729 cfp
= mwifiex_get_cfp(priv
, band
, channel
, 0);
1731 freq
= cfp
? cfp
->freq
: 0;
1733 chan
= ieee80211_get_channel(priv
->wdev
->wiphy
, freq
);
1735 if (chan
&& !(chan
->flags
& IEEE80211_CHAN_DISABLED
)) {
1736 bss
= cfg80211_inform_bss(priv
->wdev
->wiphy
,
1737 chan
, bssid
, timestamp
,
1738 cap_info_bitmap
, beacon_period
,
1739 ie_buf
, ie_len
, rssi
, GFP_KERNEL
);
1740 bss_priv
= (struct mwifiex_bss_priv
*)bss
->priv
;
1741 bss_priv
->band
= band
;
1742 bss_priv
->fw_tsf
= fw_tsf
;
1743 if (priv
->media_connected
&&
1745 priv
->curr_bss_params
.bss_descriptor
1746 .mac_address
, ETH_ALEN
))
1747 mwifiex_update_curr_bss_params(priv
,
1749 cfg80211_put_bss(priv
->wdev
->wiphy
, bss
);
1752 dev_dbg(adapter
->dev
, "missing BSS channel IE\n");
1756 spin_lock_irqsave(&adapter
->scan_pending_q_lock
, flags
);
1757 if (list_empty(&adapter
->scan_pending_q
)) {
1758 spin_unlock_irqrestore(&adapter
->scan_pending_q_lock
, flags
);
1759 spin_lock_irqsave(&adapter
->mwifiex_cmd_lock
, flags
);
1760 adapter
->scan_processing
= false;
1761 spin_unlock_irqrestore(&adapter
->mwifiex_cmd_lock
, flags
);
1763 /* Need to indicate IOCTL complete */
1764 if (adapter
->curr_cmd
->wait_q_enabled
) {
1765 adapter
->cmd_wait_q
.status
= 0;
1766 mwifiex_complete_cmd(adapter
, adapter
->curr_cmd
);
1768 if (priv
->report_scan_result
)
1769 priv
->report_scan_result
= false;
1771 if (priv
->user_scan_cfg
) {
1772 if (priv
->scan_request
) {
1773 dev_dbg(priv
->adapter
->dev
,
1774 "info: notifying scan done\n");
1775 cfg80211_scan_done(priv
->scan_request
, 0);
1776 priv
->scan_request
= NULL
;
1778 dev_dbg(priv
->adapter
->dev
,
1779 "info: scan already aborted\n");
1782 kfree(priv
->user_scan_cfg
);
1783 priv
->user_scan_cfg
= NULL
;
1786 if (priv
->user_scan_cfg
&& !priv
->scan_request
) {
1787 spin_unlock_irqrestore(&adapter
->scan_pending_q_lock
,
1789 adapter
->scan_delay_cnt
= MWIFIEX_MAX_SCAN_DELAY_CNT
;
1790 mod_timer(&priv
->scan_delay_timer
, jiffies
);
1791 dev_dbg(priv
->adapter
->dev
,
1792 "info: %s: triggerring scan abort\n", __func__
);
1793 } else if (!mwifiex_wmm_lists_empty(adapter
) &&
1794 (priv
->scan_request
&& (priv
->scan_request
->flags
&
1795 NL80211_SCAN_FLAG_LOW_PRIORITY
))) {
1796 spin_unlock_irqrestore(&adapter
->scan_pending_q_lock
,
1798 adapter
->scan_delay_cnt
= 1;
1799 mod_timer(&priv
->scan_delay_timer
, jiffies
+
1800 msecs_to_jiffies(MWIFIEX_SCAN_DELAY_MSEC
));
1801 dev_dbg(priv
->adapter
->dev
,
1802 "info: %s: deferring scan\n", __func__
);
1804 /* Get scan command from scan_pending_q and put to
1806 cmd_node
= list_first_entry(&adapter
->scan_pending_q
,
1807 struct cmd_ctrl_node
, list
);
1808 list_del(&cmd_node
->list
);
1809 spin_unlock_irqrestore(&adapter
->scan_pending_q_lock
,
1811 mwifiex_insert_cmd_to_pending_q(adapter
, cmd_node
,
1821 * This function prepares command for background scan query.
1823 * Preparation includes -
1824 * - Setting command ID and proper size
1825 * - Setting background scan flush parameter
1826 * - Ensuring correct endian-ness
1828 int mwifiex_cmd_802_11_bg_scan_query(struct host_cmd_ds_command
*cmd
)
1830 struct host_cmd_ds_802_11_bg_scan_query
*bg_query
=
1831 &cmd
->params
.bg_scan_query
;
1833 cmd
->command
= cpu_to_le16(HostCmd_CMD_802_11_BG_SCAN_QUERY
);
1834 cmd
->size
= cpu_to_le16(sizeof(struct host_cmd_ds_802_11_bg_scan_query
)
1837 bg_query
->flush
= 1;
1843 * This function inserts scan command node to the scan pending queue.
1846 mwifiex_queue_scan_cmd(struct mwifiex_private
*priv
,
1847 struct cmd_ctrl_node
*cmd_node
)
1849 struct mwifiex_adapter
*adapter
= priv
->adapter
;
1850 unsigned long flags
;
1852 cmd_node
->wait_q_enabled
= true;
1853 cmd_node
->condition
= &adapter
->scan_wait_q_woken
;
1854 spin_lock_irqsave(&adapter
->scan_pending_q_lock
, flags
);
1855 list_add_tail(&cmd_node
->list
, &adapter
->scan_pending_q
);
1856 spin_unlock_irqrestore(&adapter
->scan_pending_q_lock
, flags
);
1860 * This function sends a scan command for all available channels to the
1861 * firmware, filtered on a specific SSID.
1863 static int mwifiex_scan_specific_ssid(struct mwifiex_private
*priv
,
1864 struct cfg80211_ssid
*req_ssid
)
1866 struct mwifiex_adapter
*adapter
= priv
->adapter
;
1868 struct mwifiex_user_scan_cfg
*scan_cfg
;
1870 if (adapter
->scan_processing
) {
1871 dev_err(adapter
->dev
, "cmd: Scan already in process...\n");
1875 if (priv
->scan_block
) {
1876 dev_err(adapter
->dev
,
1877 "cmd: Scan is blocked during association...\n");
1881 scan_cfg
= kzalloc(sizeof(struct mwifiex_user_scan_cfg
), GFP_KERNEL
);
1883 dev_err(adapter
->dev
, "failed to alloc scan_cfg\n");
1887 scan_cfg
->ssid_list
= req_ssid
;
1888 scan_cfg
->num_ssids
= 1;
1890 ret
= mwifiex_scan_networks(priv
, scan_cfg
);
1897 * Sends IOCTL request to start a scan.
1899 * This function allocates the IOCTL request buffer, fills it
1900 * with requisite parameters and calls the IOCTL handler.
1902 * Scan command can be issued for both normal scan and specific SSID
1903 * scan, depending upon whether an SSID is provided or not.
1905 int mwifiex_request_scan(struct mwifiex_private
*priv
,
1906 struct cfg80211_ssid
*req_ssid
)
1910 if (down_interruptible(&priv
->async_sem
)) {
1911 dev_err(priv
->adapter
->dev
, "%s: acquire semaphore\n",
1916 priv
->adapter
->scan_wait_q_woken
= false;
1918 if (req_ssid
&& req_ssid
->ssid_len
!= 0)
1919 /* Specific SSID scan */
1920 ret
= mwifiex_scan_specific_ssid(priv
, req_ssid
);
1923 ret
= mwifiex_scan_networks(priv
, NULL
);
1926 ret
= mwifiex_wait_queue_complete(priv
->adapter
);
1928 up(&priv
->async_sem
);
1934 * This function appends the vendor specific IE TLV to a buffer.
1937 mwifiex_cmd_append_vsie_tlv(struct mwifiex_private
*priv
,
1938 u16 vsie_mask
, u8
**buffer
)
1940 int id
, ret_len
= 0;
1941 struct mwifiex_ie_types_vendor_param_set
*vs_param_set
;
1949 * Traverse through the saved vendor specific IE array and append
1950 * the selected(scan/assoc/adhoc) IE as TLV to the command
1952 for (id
= 0; id
< MWIFIEX_MAX_VSIE_NUM
; id
++) {
1953 if (priv
->vs_ie
[id
].mask
& vsie_mask
) {
1955 (struct mwifiex_ie_types_vendor_param_set
*)
1957 vs_param_set
->header
.type
=
1958 cpu_to_le16(TLV_TYPE_PASSTHROUGH
);
1959 vs_param_set
->header
.len
=
1960 cpu_to_le16((((u16
) priv
->vs_ie
[id
].ie
[1])
1962 memcpy(vs_param_set
->ie
, priv
->vs_ie
[id
].ie
,
1963 le16_to_cpu(vs_param_set
->header
.len
));
1964 *buffer
+= le16_to_cpu(vs_param_set
->header
.len
) +
1965 sizeof(struct mwifiex_ie_types_header
);
1966 ret_len
+= le16_to_cpu(vs_param_set
->header
.len
) +
1967 sizeof(struct mwifiex_ie_types_header
);
1974 * This function saves a beacon buffer of the current BSS descriptor.
1976 * The current beacon buffer is saved so that it can be restored in the
1977 * following cases that makes the beacon buffer not to contain the current
1978 * ssid's beacon buffer.
1979 * - The current ssid was not found somehow in the last scan.
1980 * - The current ssid was the last entry of the scan table and overloaded.
1983 mwifiex_save_curr_bcn(struct mwifiex_private
*priv
)
1985 struct mwifiex_bssdescriptor
*curr_bss
=
1986 &priv
->curr_bss_params
.bss_descriptor
;
1988 if (!curr_bss
->beacon_buf_size
)
1991 /* allocate beacon buffer at 1st time; or if it's size has changed */
1992 if (!priv
->curr_bcn_buf
||
1993 priv
->curr_bcn_size
!= curr_bss
->beacon_buf_size
) {
1994 priv
->curr_bcn_size
= curr_bss
->beacon_buf_size
;
1996 kfree(priv
->curr_bcn_buf
);
1997 priv
->curr_bcn_buf
= kmalloc(curr_bss
->beacon_buf_size
,
1999 if (!priv
->curr_bcn_buf
) {
2000 dev_err(priv
->adapter
->dev
,
2001 "failed to alloc curr_bcn_buf\n");
2006 memcpy(priv
->curr_bcn_buf
, curr_bss
->beacon_buf
,
2007 curr_bss
->beacon_buf_size
);
2008 dev_dbg(priv
->adapter
->dev
, "info: current beacon saved %d\n",
2009 priv
->curr_bcn_size
);
2011 curr_bss
->beacon_buf
= priv
->curr_bcn_buf
;
2013 /* adjust the pointers in the current BSS descriptor */
2014 if (curr_bss
->bcn_wpa_ie
)
2015 curr_bss
->bcn_wpa_ie
=
2016 (struct ieee_types_vendor_specific
*)
2017 (curr_bss
->beacon_buf
+
2018 curr_bss
->wpa_offset
);
2020 if (curr_bss
->bcn_rsn_ie
)
2021 curr_bss
->bcn_rsn_ie
= (struct ieee_types_generic
*)
2022 (curr_bss
->beacon_buf
+
2023 curr_bss
->rsn_offset
);
2025 if (curr_bss
->bcn_ht_cap
)
2026 curr_bss
->bcn_ht_cap
= (struct ieee80211_ht_cap
*)
2027 (curr_bss
->beacon_buf
+
2028 curr_bss
->ht_cap_offset
);
2030 if (curr_bss
->bcn_ht_oper
)
2031 curr_bss
->bcn_ht_oper
= (struct ieee80211_ht_operation
*)
2032 (curr_bss
->beacon_buf
+
2033 curr_bss
->ht_info_offset
);
2035 if (curr_bss
->bcn_bss_co_2040
)
2036 curr_bss
->bcn_bss_co_2040
=
2037 (curr_bss
->beacon_buf
+ curr_bss
->bss_co_2040_offset
);
2039 if (curr_bss
->bcn_ext_cap
)
2040 curr_bss
->bcn_ext_cap
= curr_bss
->beacon_buf
+
2041 curr_bss
->ext_cap_offset
;
2045 * This function frees the current BSS descriptor beacon buffer.
2048 mwifiex_free_curr_bcn(struct mwifiex_private
*priv
)
2050 kfree(priv
->curr_bcn_buf
);
2051 priv
->curr_bcn_buf
= NULL
;