2 * Marvell Wireless LAN device driver: scan ioctl and command handling
4 * Copyright (C) 2011, Marvell International Ltd.
6 * This software file (the "File") is distributed by Marvell International
7 * Ltd. under the terms of the GNU General Public License Version 2, June 1991
8 * (the "License"). You may use, redistribute and/or modify this File in
9 * accordance with the terms and conditions of the License, a copy of which
10 * is available by writing to the Free Software Foundation, Inc.,
11 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
12 * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
14 * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
15 * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
16 * ARE EXPRESSLY DISCLAIMED. The License provides additional details about
17 * this warranty disclaimer.
28 /* The maximum number of channels the firmware can scan per command */
29 #define MWIFIEX_MAX_CHANNELS_PER_SPECIFIC_SCAN 14
31 #define MWIFIEX_DEF_CHANNELS_PER_SCAN_CMD 4
32 #define MWIFIEX_LIMIT_1_CHANNEL_PER_SCAN_CMD 15
33 #define MWIFIEX_LIMIT_2_CHANNELS_PER_SCAN_CMD 27
34 #define MWIFIEX_LIMIT_3_CHANNELS_PER_SCAN_CMD 35
36 /* Memory needed to store a max sized Channel List TLV for a firmware scan */
37 #define CHAN_TLV_MAX_SIZE (sizeof(struct mwifiex_ie_types_header) \
38 + (MWIFIEX_MAX_CHANNELS_PER_SPECIFIC_SCAN \
39 *sizeof(struct mwifiex_chan_scan_param_set)))
41 /* Memory needed to store supported rate */
42 #define RATE_TLV_MAX_SIZE (sizeof(struct mwifiex_ie_types_rates_param_set) \
43 + HOSTCMD_SUPPORTED_RATES)
45 /* Memory needed to store a max number/size WildCard SSID TLV for a firmware
47 #define WILDCARD_SSID_TLV_MAX_SIZE \
48 (MWIFIEX_MAX_SSID_LIST_LENGTH * \
49 (sizeof(struct mwifiex_ie_types_wildcard_ssid_params) \
50 + IEEE80211_MAX_SSID_LEN))
52 /* Maximum memory needed for a mwifiex_scan_cmd_config with all TLVs at max */
53 #define MAX_SCAN_CFG_ALLOC (sizeof(struct mwifiex_scan_cmd_config) \
54 + sizeof(struct mwifiex_ie_types_num_probes) \
55 + sizeof(struct mwifiex_ie_types_htcap) \
58 + WILDCARD_SSID_TLV_MAX_SIZE)
61 union mwifiex_scan_cmd_config_tlv
{
62 /* Scan configuration (variable length) */
63 struct mwifiex_scan_cmd_config config
;
64 /* Max allocated block */
65 u8 config_alloc_buf
[MAX_SCAN_CFG_ALLOC
];
73 static u8 mwifiex_wpa_oui
[CIPHER_SUITE_MAX
][4] = {
74 { 0x00, 0x50, 0xf2, 0x02 }, /* TKIP */
75 { 0x00, 0x50, 0xf2, 0x04 }, /* AES */
77 static u8 mwifiex_rsn_oui
[CIPHER_SUITE_MAX
][4] = {
78 { 0x00, 0x0f, 0xac, 0x02 }, /* TKIP */
79 { 0x00, 0x0f, 0xac, 0x04 }, /* AES */
83 * This function parses a given IE for a given OUI.
85 * This is used to parse a WPA/RSN IE to find if it has
89 mwifiex_search_oui_in_ie(struct ie_body
*iebody
, u8
*oui
)
93 count
= iebody
->ptk_cnt
[0];
95 /* There could be multiple OUIs for PTK hence
97 2) Check all the OUIs for AES.
98 3) If one of them is AES then pass success. */
100 if (!memcmp(iebody
->ptk_body
, oui
, sizeof(iebody
->ptk_body
)))
101 return MWIFIEX_OUI_PRESENT
;
105 iebody
= (struct ie_body
*) ((u8
*) iebody
+
106 sizeof(iebody
->ptk_body
));
109 pr_debug("info: %s: OUI is not found in PTK\n", __func__
);
110 return MWIFIEX_OUI_NOT_PRESENT
;
114 * This function checks if a given OUI is present in a RSN IE.
116 * The function first checks if a RSN IE is present or not in the
117 * BSS descriptor. It tries to locate the OUI only if such an IE is
121 mwifiex_is_rsn_oui_present(struct mwifiex_bssdescriptor
*bss_desc
, u32 cipher
)
124 struct ie_body
*iebody
;
125 u8 ret
= MWIFIEX_OUI_NOT_PRESENT
;
127 if (((bss_desc
->bcn_rsn_ie
) && ((*(bss_desc
->bcn_rsn_ie
)).
128 ieee_hdr
.element_id
== WLAN_EID_RSN
))) {
129 iebody
= (struct ie_body
*)
130 (((u8
*) bss_desc
->bcn_rsn_ie
->data
) +
132 oui
= &mwifiex_rsn_oui
[cipher
][0];
133 ret
= mwifiex_search_oui_in_ie(iebody
, oui
);
141 * This function checks if a given OUI is present in a WPA IE.
143 * The function first checks if a WPA IE is present or not in the
144 * BSS descriptor. It tries to locate the OUI only if such an IE is
148 mwifiex_is_wpa_oui_present(struct mwifiex_bssdescriptor
*bss_desc
, u32 cipher
)
151 struct ie_body
*iebody
;
152 u8 ret
= MWIFIEX_OUI_NOT_PRESENT
;
154 if (((bss_desc
->bcn_wpa_ie
) &&
155 ((*(bss_desc
->bcn_wpa_ie
)).vend_hdr
.element_id
==
157 iebody
= (struct ie_body
*) bss_desc
->bcn_wpa_ie
->data
;
158 oui
= &mwifiex_wpa_oui
[cipher
][0];
159 ret
= mwifiex_search_oui_in_ie(iebody
, oui
);
167 * This function compares two SSIDs and checks if they match.
170 mwifiex_ssid_cmp(struct cfg80211_ssid
*ssid1
, struct cfg80211_ssid
*ssid2
)
172 if (!ssid1
|| !ssid2
|| (ssid1
->ssid_len
!= ssid2
->ssid_len
))
174 return memcmp(ssid1
->ssid
, ssid2
->ssid
, ssid1
->ssid_len
);
178 * This function checks if wapi is enabled in driver and scanned network is
179 * compatible with it.
182 mwifiex_is_bss_wapi(struct mwifiex_private
*priv
,
183 struct mwifiex_bssdescriptor
*bss_desc
)
185 if (priv
->sec_info
.wapi_enabled
&&
186 (bss_desc
->bcn_wapi_ie
&&
187 ((*(bss_desc
->bcn_wapi_ie
)).ieee_hdr
.element_id
==
188 WLAN_EID_BSS_AC_ACCESS_DELAY
))) {
195 * This function checks if driver is configured with no security mode and
196 * scanned network is compatible with it.
199 mwifiex_is_bss_no_sec(struct mwifiex_private
*priv
,
200 struct mwifiex_bssdescriptor
*bss_desc
)
202 if (!priv
->sec_info
.wep_enabled
&& !priv
->sec_info
.wpa_enabled
&&
203 !priv
->sec_info
.wpa2_enabled
&& ((!bss_desc
->bcn_wpa_ie
) ||
204 ((*(bss_desc
->bcn_wpa_ie
)).vend_hdr
.element_id
!=
206 ((!bss_desc
->bcn_rsn_ie
) ||
207 ((*(bss_desc
->bcn_rsn_ie
)).ieee_hdr
.element_id
!=
209 !priv
->sec_info
.encryption_mode
&& !bss_desc
->privacy
) {
216 * This function checks if static WEP is enabled in driver and scanned network
217 * is compatible with it.
220 mwifiex_is_bss_static_wep(struct mwifiex_private
*priv
,
221 struct mwifiex_bssdescriptor
*bss_desc
)
223 if (priv
->sec_info
.wep_enabled
&& !priv
->sec_info
.wpa_enabled
&&
224 !priv
->sec_info
.wpa2_enabled
&& bss_desc
->privacy
) {
231 * This function checks if wpa is enabled in driver and scanned network is
232 * compatible with it.
235 mwifiex_is_bss_wpa(struct mwifiex_private
*priv
,
236 struct mwifiex_bssdescriptor
*bss_desc
)
238 if (!priv
->sec_info
.wep_enabled
&& priv
->sec_info
.wpa_enabled
&&
239 !priv
->sec_info
.wpa2_enabled
&& ((bss_desc
->bcn_wpa_ie
) &&
240 ((*(bss_desc
->bcn_wpa_ie
)).vend_hdr
.element_id
== WLAN_EID_WPA
))
242 * Privacy bit may NOT be set in some APs like
243 * LinkSys WRT54G && bss_desc->privacy
246 dev_dbg(priv
->adapter
->dev
, "info: %s: WPA:"
247 " wpa_ie=%#x wpa2_ie=%#x WEP=%s WPA=%s WPA2=%s "
248 "EncMode=%#x privacy=%#x\n", __func__
,
249 (bss_desc
->bcn_wpa_ie
) ?
250 (*(bss_desc
->bcn_wpa_ie
)).
251 vend_hdr
.element_id
: 0,
252 (bss_desc
->bcn_rsn_ie
) ?
253 (*(bss_desc
->bcn_rsn_ie
)).
254 ieee_hdr
.element_id
: 0,
255 (priv
->sec_info
.wep_enabled
) ? "e" : "d",
256 (priv
->sec_info
.wpa_enabled
) ? "e" : "d",
257 (priv
->sec_info
.wpa2_enabled
) ? "e" : "d",
258 priv
->sec_info
.encryption_mode
,
266 * This function checks if wpa2 is enabled in driver and scanned network is
267 * compatible with it.
270 mwifiex_is_bss_wpa2(struct mwifiex_private
*priv
,
271 struct mwifiex_bssdescriptor
*bss_desc
)
273 if (!priv
->sec_info
.wep_enabled
&&
274 !priv
->sec_info
.wpa_enabled
&&
275 priv
->sec_info
.wpa2_enabled
&&
276 ((bss_desc
->bcn_rsn_ie
) &&
277 ((*(bss_desc
->bcn_rsn_ie
)).ieee_hdr
.element_id
== WLAN_EID_RSN
))) {
279 * Privacy bit may NOT be set in some APs like
280 * LinkSys WRT54G && bss_desc->privacy
282 dev_dbg(priv
->adapter
->dev
, "info: %s: WPA2: "
283 " wpa_ie=%#x wpa2_ie=%#x WEP=%s WPA=%s WPA2=%s "
284 "EncMode=%#x privacy=%#x\n", __func__
,
285 (bss_desc
->bcn_wpa_ie
) ?
286 (*(bss_desc
->bcn_wpa_ie
)).
287 vend_hdr
.element_id
: 0,
288 (bss_desc
->bcn_rsn_ie
) ?
289 (*(bss_desc
->bcn_rsn_ie
)).
290 ieee_hdr
.element_id
: 0,
291 (priv
->sec_info
.wep_enabled
) ? "e" : "d",
292 (priv
->sec_info
.wpa_enabled
) ? "e" : "d",
293 (priv
->sec_info
.wpa2_enabled
) ? "e" : "d",
294 priv
->sec_info
.encryption_mode
,
302 * This function checks if adhoc AES is enabled in driver and scanned network is
303 * compatible with it.
306 mwifiex_is_bss_adhoc_aes(struct mwifiex_private
*priv
,
307 struct mwifiex_bssdescriptor
*bss_desc
)
309 if (!priv
->sec_info
.wep_enabled
&& !priv
->sec_info
.wpa_enabled
&&
310 !priv
->sec_info
.wpa2_enabled
&&
311 ((!bss_desc
->bcn_wpa_ie
) ||
312 ((*(bss_desc
->bcn_wpa_ie
)).vend_hdr
.element_id
!= WLAN_EID_WPA
)) &&
313 ((!bss_desc
->bcn_rsn_ie
) ||
314 ((*(bss_desc
->bcn_rsn_ie
)).ieee_hdr
.element_id
!= WLAN_EID_RSN
)) &&
315 !priv
->sec_info
.encryption_mode
&& bss_desc
->privacy
) {
322 * This function checks if dynamic WEP is enabled in driver and scanned network
323 * is compatible with it.
326 mwifiex_is_bss_dynamic_wep(struct mwifiex_private
*priv
,
327 struct mwifiex_bssdescriptor
*bss_desc
)
329 if (!priv
->sec_info
.wep_enabled
&& !priv
->sec_info
.wpa_enabled
&&
330 !priv
->sec_info
.wpa2_enabled
&&
331 ((!bss_desc
->bcn_wpa_ie
) ||
332 ((*(bss_desc
->bcn_wpa_ie
)).vend_hdr
.element_id
!= WLAN_EID_WPA
)) &&
333 ((!bss_desc
->bcn_rsn_ie
) ||
334 ((*(bss_desc
->bcn_rsn_ie
)).ieee_hdr
.element_id
!= WLAN_EID_RSN
)) &&
335 priv
->sec_info
.encryption_mode
&& bss_desc
->privacy
) {
336 dev_dbg(priv
->adapter
->dev
, "info: %s: dynamic "
337 "WEP: wpa_ie=%#x wpa2_ie=%#x "
338 "EncMode=%#x privacy=%#x\n",
340 (bss_desc
->bcn_wpa_ie
) ?
341 (*(bss_desc
->bcn_wpa_ie
)).
342 vend_hdr
.element_id
: 0,
343 (bss_desc
->bcn_rsn_ie
) ?
344 (*(bss_desc
->bcn_rsn_ie
)).
345 ieee_hdr
.element_id
: 0,
346 priv
->sec_info
.encryption_mode
,
354 * This function checks if a scanned network is compatible with the driver
357 * WEP WPA WPA2 ad-hoc encrypt Network
358 * enabled enabled enabled AES mode Privacy WPA WPA2 Compatible
359 * 0 0 0 0 NONE 0 0 0 yes No security
360 * 0 1 0 0 x 1x 1 x yes WPA (disable
362 * 0 0 1 0 x 1x x 1 yes WPA2 (disable
364 * 0 0 0 1 NONE 1 0 0 yes Ad-hoc AES
365 * 1 0 0 0 NONE 1 0 0 yes Static WEP
367 * 0 0 0 0 !=NONE 1 0 0 yes Dynamic WEP
369 * Compatibility is not matched while roaming, except for mode.
372 mwifiex_is_network_compatible(struct mwifiex_private
*priv
,
373 struct mwifiex_bssdescriptor
*bss_desc
, u32 mode
)
375 struct mwifiex_adapter
*adapter
= priv
->adapter
;
377 bss_desc
->disable_11n
= false;
379 /* Don't check for compatibility if roaming */
380 if (priv
->media_connected
&&
381 (priv
->bss_mode
== NL80211_IFTYPE_STATION
) &&
382 (bss_desc
->bss_mode
== NL80211_IFTYPE_STATION
))
385 if (priv
->wps
.session_enable
) {
386 dev_dbg(adapter
->dev
,
387 "info: return success directly in WPS period\n");
391 if (mwifiex_is_bss_wapi(priv
, bss_desc
)) {
392 dev_dbg(adapter
->dev
, "info: return success for WAPI AP\n");
396 if (bss_desc
->bss_mode
== mode
) {
397 if (mwifiex_is_bss_no_sec(priv
, bss_desc
)) {
400 } else if (mwifiex_is_bss_static_wep(priv
, bss_desc
)) {
401 /* Static WEP enabled */
402 dev_dbg(adapter
->dev
, "info: Disable 11n in WEP mode.\n");
403 bss_desc
->disable_11n
= true;
405 } else if (mwifiex_is_bss_wpa(priv
, bss_desc
)) {
407 if (((priv
->adapter
->config_bands
& BAND_GN
||
408 priv
->adapter
->config_bands
& BAND_AN
) &&
409 bss_desc
->bcn_ht_cap
) &&
410 !mwifiex_is_wpa_oui_present(bss_desc
,
411 CIPHER_SUITE_CCMP
)) {
413 if (mwifiex_is_wpa_oui_present
414 (bss_desc
, CIPHER_SUITE_TKIP
)) {
415 dev_dbg(adapter
->dev
,
416 "info: Disable 11n if AES "
417 "is not supported by AP\n");
418 bss_desc
->disable_11n
= true;
424 } else if (mwifiex_is_bss_wpa2(priv
, bss_desc
)) {
426 if (((priv
->adapter
->config_bands
& BAND_GN
||
427 priv
->adapter
->config_bands
& BAND_AN
) &&
428 bss_desc
->bcn_ht_cap
) &&
429 !mwifiex_is_rsn_oui_present(bss_desc
,
430 CIPHER_SUITE_CCMP
)) {
432 if (mwifiex_is_rsn_oui_present
433 (bss_desc
, CIPHER_SUITE_TKIP
)) {
434 dev_dbg(adapter
->dev
,
435 "info: Disable 11n if AES "
436 "is not supported by AP\n");
437 bss_desc
->disable_11n
= true;
443 } else if (mwifiex_is_bss_adhoc_aes(priv
, bss_desc
)) {
444 /* Ad-hoc AES enabled */
446 } else if (mwifiex_is_bss_dynamic_wep(priv
, bss_desc
)) {
447 /* Dynamic WEP enabled */
451 /* Security doesn't match */
452 dev_dbg(adapter
->dev
,
453 "info: %s: failed: wpa_ie=%#x wpa2_ie=%#x WEP=%s "
454 "WPA=%s WPA2=%s EncMode=%#x privacy=%#x\n", __func__
,
455 (bss_desc
->bcn_wpa_ie
) ?
456 (*(bss_desc
->bcn_wpa_ie
)).vend_hdr
.element_id
: 0,
457 (bss_desc
->bcn_rsn_ie
) ?
458 (*(bss_desc
->bcn_rsn_ie
)).ieee_hdr
.element_id
: 0,
459 (priv
->sec_info
.wep_enabled
) ? "e" : "d",
460 (priv
->sec_info
.wpa_enabled
) ? "e" : "d",
461 (priv
->sec_info
.wpa2_enabled
) ? "e" : "d",
462 priv
->sec_info
.encryption_mode
, bss_desc
->privacy
);
466 /* Mode doesn't match */
471 * This function creates a channel list for the driver to scan, based
472 * on region/band information.
474 * This routine is used for any scan that is not provided with a
475 * specific channel list to scan.
478 mwifiex_scan_create_channel_list(struct mwifiex_private
*priv
,
479 const struct mwifiex_user_scan_cfg
481 struct mwifiex_chan_scan_param_set
485 enum ieee80211_band band
;
486 struct ieee80211_supported_band
*sband
;
487 struct ieee80211_channel
*ch
;
488 struct mwifiex_adapter
*adapter
= priv
->adapter
;
491 for (band
= 0; (band
< IEEE80211_NUM_BANDS
) ; band
++) {
493 if (!priv
->wdev
->wiphy
->bands
[band
])
496 sband
= priv
->wdev
->wiphy
->bands
[band
];
498 for (i
= 0; (i
< sband
->n_channels
) ; i
++) {
499 ch
= &sband
->channels
[i
];
500 if (ch
->flags
& IEEE80211_CHAN_DISABLED
)
502 scan_chan_list
[chan_idx
].radio_type
= band
;
505 user_scan_in
->chan_list
[0].scan_time
)
506 scan_chan_list
[chan_idx
].max_scan_time
=
507 cpu_to_le16((u16
) user_scan_in
->
508 chan_list
[0].scan_time
);
509 else if (ch
->flags
& IEEE80211_CHAN_PASSIVE_SCAN
)
510 scan_chan_list
[chan_idx
].max_scan_time
=
511 cpu_to_le16(adapter
->passive_scan_time
);
513 scan_chan_list
[chan_idx
].max_scan_time
=
514 cpu_to_le16(adapter
->active_scan_time
);
516 if (ch
->flags
& IEEE80211_CHAN_PASSIVE_SCAN
)
517 scan_chan_list
[chan_idx
].chan_scan_mode_bitmap
518 |= MWIFIEX_PASSIVE_SCAN
;
520 scan_chan_list
[chan_idx
].chan_scan_mode_bitmap
521 &= ~MWIFIEX_PASSIVE_SCAN
;
522 scan_chan_list
[chan_idx
].chan_number
=
525 scan_chan_list
[chan_idx
].max_scan_time
=
526 cpu_to_le16(adapter
->specific_scan_time
);
527 scan_chan_list
[chan_idx
].chan_scan_mode_bitmap
528 |= MWIFIEX_DISABLE_CHAN_FILT
;
538 * This function constructs and sends multiple scan config commands to
541 * Previous routines in the code flow have created a scan command configuration
542 * with any requested TLVs. This function splits the channel TLV into maximum
543 * channels supported per scan lists and sends the portion of the channel TLV,
544 * along with the other TLVs, to the firmware.
547 mwifiex_scan_channel_list(struct mwifiex_private
*priv
,
548 u32 max_chan_per_scan
, u8 filtered_scan
,
549 struct mwifiex_scan_cmd_config
*scan_cfg_out
,
550 struct mwifiex_ie_types_chan_list_param_set
552 struct mwifiex_chan_scan_param_set
*scan_chan_list
)
555 struct mwifiex_chan_scan_param_set
*tmp_chan_list
;
556 struct mwifiex_chan_scan_param_set
*start_chan
;
562 if (!scan_cfg_out
|| !chan_tlv_out
|| !scan_chan_list
) {
563 dev_dbg(priv
->adapter
->dev
,
564 "info: Scan: Null detect: %p, %p, %p\n",
565 scan_cfg_out
, chan_tlv_out
, scan_chan_list
);
569 chan_tlv_out
->header
.type
= cpu_to_le16(TLV_TYPE_CHANLIST
);
571 /* Set the temp channel struct pointer to the start of the desired
573 tmp_chan_list
= scan_chan_list
;
575 /* Loop through the desired channel list, sending a new firmware scan
576 commands for each max_chan_per_scan channels (or for 1,6,11
577 individually if configured accordingly) */
578 while (tmp_chan_list
->chan_number
) {
582 chan_tlv_out
->header
.len
= 0;
583 start_chan
= tmp_chan_list
;
587 * Construct the Channel TLV for the scan command. Continue to
588 * insert channel TLVs until:
589 * - the tlv_idx hits the maximum configured per scan command
590 * - the next channel to insert is 0 (end of desired channel
592 * - done_early is set (controlling individual scanning of
595 while (tlv_idx
< max_chan_per_scan
&&
596 tmp_chan_list
->chan_number
&& !done_early
) {
598 dev_dbg(priv
->adapter
->dev
,
599 "info: Scan: Chan(%3d), Radio(%d),"
600 " Mode(%d, %d), Dur(%d)\n",
601 tmp_chan_list
->chan_number
,
602 tmp_chan_list
->radio_type
,
603 tmp_chan_list
->chan_scan_mode_bitmap
604 & MWIFIEX_PASSIVE_SCAN
,
605 (tmp_chan_list
->chan_scan_mode_bitmap
606 & MWIFIEX_DISABLE_CHAN_FILT
) >> 1,
607 le16_to_cpu(tmp_chan_list
->max_scan_time
));
609 /* Copy the current channel TLV to the command being
611 memcpy(chan_tlv_out
->chan_scan_param
+ tlv_idx
,
613 sizeof(chan_tlv_out
->chan_scan_param
));
615 /* Increment the TLV header length by the size
617 le16_add_cpu(&chan_tlv_out
->header
.len
,
618 sizeof(chan_tlv_out
->chan_scan_param
));
621 * The tlv buffer length is set to the number of bytes
622 * of the between the channel tlv pointer and the start
623 * of the tlv buffer. This compensates for any TLVs
624 * that were appended before the channel list.
626 scan_cfg_out
->tlv_buf_len
= (u32
) ((u8
*) chan_tlv_out
-
627 scan_cfg_out
->tlv_buf
);
629 /* Add the size of the channel tlv header and the data
631 scan_cfg_out
->tlv_buf_len
+=
632 (sizeof(chan_tlv_out
->header
)
633 + le16_to_cpu(chan_tlv_out
->header
.len
));
635 /* Increment the index to the channel tlv we are
639 /* Count the total scan time per command */
641 le16_to_cpu(tmp_chan_list
->max_scan_time
);
645 /* Stop the loop if the *current* channel is in the
646 1,6,11 set and we are not filtering on a BSSID
648 if (!filtered_scan
&&
649 (tmp_chan_list
->chan_number
== 1 ||
650 tmp_chan_list
->chan_number
== 6 ||
651 tmp_chan_list
->chan_number
== 11))
654 /* Increment the tmp pointer to the next channel to
658 /* Stop the loop if the *next* channel is in the 1,6,11
659 set. This will cause it to be the only channel
660 scanned on the next interation */
661 if (!filtered_scan
&&
662 (tmp_chan_list
->chan_number
== 1 ||
663 tmp_chan_list
->chan_number
== 6 ||
664 tmp_chan_list
->chan_number
== 11))
668 /* The total scan time should be less than scan command timeout
670 if (total_scan_time
> MWIFIEX_MAX_TOTAL_SCAN_TIME
) {
671 dev_err(priv
->adapter
->dev
, "total scan time %dms"
672 " is over limit (%dms), scan skipped\n",
673 total_scan_time
, MWIFIEX_MAX_TOTAL_SCAN_TIME
);
678 priv
->adapter
->scan_channels
= start_chan
;
680 /* Send the scan command to the firmware with the specified
682 ret
= mwifiex_send_cmd_async(priv
, HostCmd_CMD_802_11_SCAN
,
683 HostCmd_ACT_GEN_SET
, 0,
696 * This function constructs a scan command configuration structure to use
699 * Application layer or other functions can invoke network scanning
700 * with a scan configuration supplied in a user scan configuration structure.
701 * This structure is used as the basis of one or many scan command configuration
702 * commands that are sent to the command processing module and eventually to the
705 * This function creates a scan command configuration structure based on the
706 * following user supplied parameters (if present):
709 * - Number of Probes to be sent
712 * If the SSID or BSSID filter is not present, the filter is disabled/cleared.
713 * If the number of probes is not set, adapter default setting is used.
716 mwifiex_config_scan(struct mwifiex_private
*priv
,
717 const struct mwifiex_user_scan_cfg
*user_scan_in
,
718 struct mwifiex_scan_cmd_config
*scan_cfg_out
,
719 struct mwifiex_ie_types_chan_list_param_set
**chan_list_out
,
720 struct mwifiex_chan_scan_param_set
*scan_chan_list
,
721 u8
*max_chan_per_scan
, u8
*filtered_scan
,
722 u8
*scan_current_only
)
724 struct mwifiex_adapter
*adapter
= priv
->adapter
;
725 struct mwifiex_ie_types_num_probes
*num_probes_tlv
;
726 struct mwifiex_ie_types_wildcard_ssid_params
*wildcard_ssid_tlv
;
727 struct mwifiex_ie_types_rates_param_set
*rates_tlv
;
739 u8 rates
[MWIFIEX_SUPPORTED_RATES
];
741 struct mwifiex_ie_types_htcap
*ht_cap
;
743 /* The tlv_buf_len is calculated for each scan command. The TLVs added
744 in this routine will be preserved since the routine that sends the
745 command will append channelTLVs at *chan_list_out. The difference
746 between the *chan_list_out and the tlv_buf start will be used to
747 calculate the size of anything we add in this routine. */
748 scan_cfg_out
->tlv_buf_len
= 0;
750 /* Running tlv pointer. Assigned to chan_list_out at end of function
751 so later routines know where channels can be added to the command
753 tlv_pos
= scan_cfg_out
->tlv_buf
;
755 /* Initialize the scan as un-filtered; the flag is later set to TRUE
756 below if a SSID or BSSID filter is sent in the command */
757 *filtered_scan
= false;
759 /* Initialize the scan as not being only on the current channel. If
760 the channel list is customized, only contains one channel, and is
761 the active channel, this is set true and data flow is not halted. */
762 *scan_current_only
= false;
766 /* Default the ssid_filter flag to TRUE, set false under
767 certain wildcard conditions and qualified by the existence
768 of an SSID list before marking the scan as filtered */
771 /* Set the BSS type scan filter, use Adapter setting if
773 scan_cfg_out
->bss_mode
=
774 (user_scan_in
->bss_mode
? (u8
) user_scan_in
->
775 bss_mode
: (u8
) adapter
->scan_mode
);
777 /* Set the number of probes to send, use Adapter setting
780 (user_scan_in
->num_probes
? user_scan_in
->
781 num_probes
: adapter
->scan_probes
);
784 * Set the BSSID filter to the incoming configuration,
785 * if non-zero. If not set, it will remain disabled
788 memcpy(scan_cfg_out
->specific_bssid
,
789 user_scan_in
->specific_bssid
,
790 sizeof(scan_cfg_out
->specific_bssid
));
792 for (i
= 0; i
< user_scan_in
->num_ssids
; i
++) {
793 ssid_len
= user_scan_in
->ssid_list
[i
].ssid_len
;
796 (struct mwifiex_ie_types_wildcard_ssid_params
*)
798 wildcard_ssid_tlv
->header
.type
=
799 cpu_to_le16(TLV_TYPE_WILDCARDSSID
);
800 wildcard_ssid_tlv
->header
.len
= cpu_to_le16(
801 (u16
) (ssid_len
+ sizeof(wildcard_ssid_tlv
->
805 * max_ssid_length = 0 tells firmware to perform
806 * specific scan for the SSID filled, whereas
807 * max_ssid_length = IEEE80211_MAX_SSID_LEN is for
811 wildcard_ssid_tlv
->max_ssid_length
= 0;
813 wildcard_ssid_tlv
->max_ssid_length
=
814 IEEE80211_MAX_SSID_LEN
;
816 memcpy(wildcard_ssid_tlv
->ssid
,
817 user_scan_in
->ssid_list
[i
].ssid
, ssid_len
);
819 tlv_pos
+= (sizeof(wildcard_ssid_tlv
->header
)
820 + le16_to_cpu(wildcard_ssid_tlv
->header
.len
));
822 dev_dbg(adapter
->dev
, "info: scan: ssid[%d]: %s, %d\n",
823 i
, wildcard_ssid_tlv
->ssid
,
824 wildcard_ssid_tlv
->max_ssid_length
);
826 /* Empty wildcard ssid with a maxlen will match many or
827 potentially all SSIDs (maxlen == 32), therefore do
828 not treat the scan as
830 if (!ssid_len
&& wildcard_ssid_tlv
->max_ssid_length
)
835 * The default number of channels sent in the command is low to
836 * ensure the response buffer from the firmware does not
837 * truncate scan results. That is not an issue with an SSID
838 * or BSSID filter applied to the scan results in the firmware.
840 if ((i
&& ssid_filter
) ||
841 !is_zero_ether_addr(scan_cfg_out
->specific_bssid
))
842 *filtered_scan
= true;
844 scan_cfg_out
->bss_mode
= (u8
) adapter
->scan_mode
;
845 num_probes
= adapter
->scan_probes
;
849 * If a specific BSSID or SSID is used, the number of channels in the
850 * scan command will be increased to the absolute maximum.
853 *max_chan_per_scan
= MWIFIEX_MAX_CHANNELS_PER_SPECIFIC_SCAN
;
855 *max_chan_per_scan
= MWIFIEX_DEF_CHANNELS_PER_SCAN_CMD
;
857 /* If the input config or adapter has the number of Probes set,
861 dev_dbg(adapter
->dev
, "info: scan: num_probes = %d\n",
864 num_probes_tlv
= (struct mwifiex_ie_types_num_probes
*) tlv_pos
;
865 num_probes_tlv
->header
.type
= cpu_to_le16(TLV_TYPE_NUMPROBES
);
866 num_probes_tlv
->header
.len
=
867 cpu_to_le16(sizeof(num_probes_tlv
->num_probes
));
868 num_probes_tlv
->num_probes
= cpu_to_le16((u16
) num_probes
);
870 tlv_pos
+= sizeof(num_probes_tlv
->header
) +
871 le16_to_cpu(num_probes_tlv
->header
.len
);
875 /* Append rates tlv */
876 memset(rates
, 0, sizeof(rates
));
878 rates_size
= mwifiex_get_supported_rates(priv
, rates
);
880 rates_tlv
= (struct mwifiex_ie_types_rates_param_set
*) tlv_pos
;
881 rates_tlv
->header
.type
= cpu_to_le16(WLAN_EID_SUPP_RATES
);
882 rates_tlv
->header
.len
= cpu_to_le16((u16
) rates_size
);
883 memcpy(rates_tlv
->rates
, rates
, rates_size
);
884 tlv_pos
+= sizeof(rates_tlv
->header
) + rates_size
;
886 dev_dbg(adapter
->dev
, "info: SCAN_CMD: Rates size = %d\n", rates_size
);
888 if (ISSUPP_11NENABLED(priv
->adapter
->fw_cap_info
) &&
889 (priv
->adapter
->config_bands
& BAND_GN
||
890 priv
->adapter
->config_bands
& BAND_AN
)) {
891 ht_cap
= (struct mwifiex_ie_types_htcap
*) tlv_pos
;
892 memset(ht_cap
, 0, sizeof(struct mwifiex_ie_types_htcap
));
893 ht_cap
->header
.type
= cpu_to_le16(WLAN_EID_HT_CAPABILITY
);
895 cpu_to_le16(sizeof(struct ieee80211_ht_cap
));
897 mwifiex_band_to_radio_type(priv
->adapter
->config_bands
);
898 mwifiex_fill_cap_info(priv
, radio_type
, ht_cap
);
899 tlv_pos
+= sizeof(struct mwifiex_ie_types_htcap
);
902 /* Append vendor specific IE TLV */
903 mwifiex_cmd_append_vsie_tlv(priv
, MWIFIEX_VSIE_MASK_SCAN
, &tlv_pos
);
906 * Set the output for the channel TLV to the address in the tlv buffer
907 * past any TLVs that were added in this function (SSID, num_probes).
908 * Channel TLVs will be added past this for each scan command,
909 * preserving the TLVs that were previously added.
912 (struct mwifiex_ie_types_chan_list_param_set
*) tlv_pos
;
914 if (user_scan_in
&& user_scan_in
->chan_list
[0].chan_number
) {
916 dev_dbg(adapter
->dev
, "info: Scan: Using supplied channel list\n");
919 chan_idx
< MWIFIEX_USER_SCAN_CHAN_MAX
&&
920 user_scan_in
->chan_list
[chan_idx
].chan_number
;
923 channel
= user_scan_in
->chan_list
[chan_idx
].chan_number
;
924 (scan_chan_list
+ chan_idx
)->chan_number
= channel
;
927 user_scan_in
->chan_list
[chan_idx
].radio_type
;
928 (scan_chan_list
+ chan_idx
)->radio_type
= radio_type
;
930 scan_type
= user_scan_in
->chan_list
[chan_idx
].scan_type
;
932 if (scan_type
== MWIFIEX_SCAN_TYPE_PASSIVE
)
934 chan_idx
)->chan_scan_mode_bitmap
935 |= MWIFIEX_PASSIVE_SCAN
;
938 chan_idx
)->chan_scan_mode_bitmap
939 &= ~MWIFIEX_PASSIVE_SCAN
;
941 if (user_scan_in
->chan_list
[chan_idx
].scan_time
) {
942 scan_dur
= (u16
) user_scan_in
->
943 chan_list
[chan_idx
].scan_time
;
945 if (scan_type
== MWIFIEX_SCAN_TYPE_PASSIVE
)
946 scan_dur
= adapter
->passive_scan_time
;
947 else if (*filtered_scan
)
948 scan_dur
= adapter
->specific_scan_time
;
950 scan_dur
= adapter
->active_scan_time
;
953 (scan_chan_list
+ chan_idx
)->min_scan_time
=
954 cpu_to_le16(scan_dur
);
955 (scan_chan_list
+ chan_idx
)->max_scan_time
=
956 cpu_to_le16(scan_dur
);
959 /* Check if we are only scanning the current channel */
960 if ((chan_idx
== 1) &&
961 (user_scan_in
->chan_list
[0].chan_number
==
962 priv
->curr_bss_params
.bss_descriptor
.channel
)) {
963 *scan_current_only
= true;
964 dev_dbg(adapter
->dev
,
965 "info: Scan: Scanning current channel only\n");
969 dev_dbg(adapter
->dev
,
970 "info: Scan: Creating full region channel list\n");
971 chan_num
= mwifiex_scan_create_channel_list(priv
, user_scan_in
,
977 * In associated state we will reduce the number of channels scanned per
978 * scan command to avoid any traffic delay/loss. This number is decided
979 * based on total number of channels to be scanned due to constraints
980 * of command buffers.
982 if (priv
->media_connected
) {
983 if (chan_num
< MWIFIEX_LIMIT_1_CHANNEL_PER_SCAN_CMD
)
984 *max_chan_per_scan
= 1;
985 else if (chan_num
< MWIFIEX_LIMIT_2_CHANNELS_PER_SCAN_CMD
)
986 *max_chan_per_scan
= 2;
987 else if (chan_num
< MWIFIEX_LIMIT_3_CHANNELS_PER_SCAN_CMD
)
988 *max_chan_per_scan
= 3;
990 *max_chan_per_scan
= 4;
995 * This function inspects the scan response buffer for pointers to
998 * TLVs can be included at the end of the scan response BSS information.
1000 * Data in the buffer is parsed pointers to TLVs that can potentially
1001 * be passed back in the response.
1004 mwifiex_ret_802_11_scan_get_tlv_ptrs(struct mwifiex_adapter
*adapter
,
1005 struct mwifiex_ie_types_data
*tlv
,
1006 u32 tlv_buf_size
, u32 req_tlv_type
,
1007 struct mwifiex_ie_types_data
**tlv_data
)
1009 struct mwifiex_ie_types_data
*current_tlv
;
1015 tlv_buf_left
= tlv_buf_size
;
1018 dev_dbg(adapter
->dev
, "info: SCAN_RESP: tlv_buf_size = %d\n",
1021 while (tlv_buf_left
>= sizeof(struct mwifiex_ie_types_header
)) {
1023 tlv_type
= le16_to_cpu(current_tlv
->header
.type
);
1024 tlv_len
= le16_to_cpu(current_tlv
->header
.len
);
1026 if (sizeof(tlv
->header
) + tlv_len
> tlv_buf_left
) {
1027 dev_err(adapter
->dev
, "SCAN_RESP: TLV buffer corrupt\n");
1031 if (req_tlv_type
== tlv_type
) {
1033 case TLV_TYPE_TSFTIMESTAMP
:
1034 dev_dbg(adapter
->dev
, "info: SCAN_RESP: TSF "
1035 "timestamp TLV, len = %d\n", tlv_len
);
1036 *tlv_data
= current_tlv
;
1038 case TLV_TYPE_CHANNELBANDLIST
:
1039 dev_dbg(adapter
->dev
, "info: SCAN_RESP: channel"
1040 " band list TLV, len = %d\n", tlv_len
);
1041 *tlv_data
= current_tlv
;
1044 dev_err(adapter
->dev
,
1045 "SCAN_RESP: unhandled TLV = %d\n",
1047 /* Give up, this seems corrupted */
1056 tlv_buf_left
-= (sizeof(tlv
->header
) + tlv_len
);
1058 (struct mwifiex_ie_types_data
*) (current_tlv
->data
+
1065 * This function parses provided beacon buffer and updates
1066 * respective fields in bss descriptor structure.
1068 int mwifiex_update_bss_desc_with_ie(struct mwifiex_adapter
*adapter
,
1069 struct mwifiex_bssdescriptor
*bss_entry
)
1073 struct ieee_types_fh_param_set
*fh_param_set
;
1074 struct ieee_types_ds_param_set
*ds_param_set
;
1075 struct ieee_types_cf_param_set
*cf_param_set
;
1076 struct ieee_types_ibss_param_set
*ibss_param_set
;
1083 u8 found_data_rate_ie
;
1085 struct ieee_types_vendor_specific
*vendor_ie
;
1086 const u8 wpa_oui
[4] = { 0x00, 0x50, 0xf2, 0x01 };
1087 const u8 wmm_oui
[4] = { 0x00, 0x50, 0xf2, 0x02 };
1089 found_data_rate_ie
= false;
1091 current_ptr
= bss_entry
->beacon_buf
;
1092 bytes_left
= bss_entry
->beacon_buf_size
;
1094 /* Process variable IE */
1095 while (bytes_left
>= 2) {
1096 element_id
= *current_ptr
;
1097 element_len
= *(current_ptr
+ 1);
1098 total_ie_len
= element_len
+ sizeof(struct ieee_types_header
);
1100 if (bytes_left
< total_ie_len
) {
1101 dev_err(adapter
->dev
, "err: InterpretIE: in processing"
1102 " IE, bytes left < IE length\n");
1105 switch (element_id
) {
1107 bss_entry
->ssid
.ssid_len
= element_len
;
1108 memcpy(bss_entry
->ssid
.ssid
, (current_ptr
+ 2),
1110 dev_dbg(adapter
->dev
,
1111 "info: InterpretIE: ssid: %-32s\n",
1112 bss_entry
->ssid
.ssid
);
1115 case WLAN_EID_SUPP_RATES
:
1116 memcpy(bss_entry
->data_rates
, current_ptr
+ 2,
1118 memcpy(bss_entry
->supported_rates
, current_ptr
+ 2,
1120 rate_size
= element_len
;
1121 found_data_rate_ie
= true;
1124 case WLAN_EID_FH_PARAMS
:
1126 (struct ieee_types_fh_param_set
*) current_ptr
;
1127 memcpy(&bss_entry
->phy_param_set
.fh_param_set
,
1129 sizeof(struct ieee_types_fh_param_set
));
1132 case WLAN_EID_DS_PARAMS
:
1134 (struct ieee_types_ds_param_set
*) current_ptr
;
1136 bss_entry
->channel
= ds_param_set
->current_chan
;
1138 memcpy(&bss_entry
->phy_param_set
.ds_param_set
,
1140 sizeof(struct ieee_types_ds_param_set
));
1143 case WLAN_EID_CF_PARAMS
:
1145 (struct ieee_types_cf_param_set
*) current_ptr
;
1146 memcpy(&bss_entry
->ss_param_set
.cf_param_set
,
1148 sizeof(struct ieee_types_cf_param_set
));
1151 case WLAN_EID_IBSS_PARAMS
:
1153 (struct ieee_types_ibss_param_set
*)
1155 memcpy(&bss_entry
->ss_param_set
.ibss_param_set
,
1157 sizeof(struct ieee_types_ibss_param_set
));
1160 case WLAN_EID_ERP_INFO
:
1161 bss_entry
->erp_flags
= *(current_ptr
+ 2);
1164 case WLAN_EID_EXT_SUPP_RATES
:
1166 * Only process extended supported rate
1167 * if data rate is already found.
1168 * Data rate IE should come before
1169 * extended supported rate IE
1171 if (found_data_rate_ie
) {
1172 if ((element_len
+ rate_size
) >
1173 MWIFIEX_SUPPORTED_RATES
)
1175 (MWIFIEX_SUPPORTED_RATES
-
1178 bytes_to_copy
= element_len
;
1180 rate
= (u8
*) bss_entry
->data_rates
;
1182 memcpy(rate
, current_ptr
+ 2, bytes_to_copy
);
1184 rate
= (u8
*) bss_entry
->supported_rates
;
1186 memcpy(rate
, current_ptr
+ 2, bytes_to_copy
);
1190 case WLAN_EID_VENDOR_SPECIFIC
:
1191 vendor_ie
= (struct ieee_types_vendor_specific
*)
1195 (vendor_ie
->vend_hdr
.oui
, wpa_oui
,
1197 bss_entry
->bcn_wpa_ie
=
1198 (struct ieee_types_vendor_specific
*)
1200 bss_entry
->wpa_offset
= (u16
)
1201 (current_ptr
- bss_entry
->beacon_buf
);
1202 } else if (!memcmp(vendor_ie
->vend_hdr
.oui
, wmm_oui
,
1205 sizeof(struct ieee_types_wmm_parameter
) ||
1207 sizeof(struct ieee_types_wmm_info
))
1209 * Only accept and copy the WMM IE if
1210 * it matches the size expected for the
1211 * WMM Info IE or the WMM Parameter IE.
1213 memcpy((u8
*) &bss_entry
->wmm_ie
,
1214 current_ptr
, total_ie_len
);
1218 bss_entry
->bcn_rsn_ie
=
1219 (struct ieee_types_generic
*) current_ptr
;
1220 bss_entry
->rsn_offset
= (u16
) (current_ptr
-
1221 bss_entry
->beacon_buf
);
1223 case WLAN_EID_BSS_AC_ACCESS_DELAY
:
1224 bss_entry
->bcn_wapi_ie
=
1225 (struct ieee_types_generic
*) current_ptr
;
1226 bss_entry
->wapi_offset
= (u16
) (current_ptr
-
1227 bss_entry
->beacon_buf
);
1229 case WLAN_EID_HT_CAPABILITY
:
1230 bss_entry
->bcn_ht_cap
= (struct ieee80211_ht_cap
*)
1232 sizeof(struct ieee_types_header
));
1233 bss_entry
->ht_cap_offset
= (u16
) (current_ptr
+
1234 sizeof(struct ieee_types_header
) -
1235 bss_entry
->beacon_buf
);
1237 case WLAN_EID_HT_OPERATION
:
1238 bss_entry
->bcn_ht_oper
=
1239 (struct ieee80211_ht_operation
*)(current_ptr
+
1240 sizeof(struct ieee_types_header
));
1241 bss_entry
->ht_info_offset
= (u16
) (current_ptr
+
1242 sizeof(struct ieee_types_header
) -
1243 bss_entry
->beacon_buf
);
1245 case WLAN_EID_BSS_COEX_2040
:
1246 bss_entry
->bcn_bss_co_2040
= current_ptr
+
1247 sizeof(struct ieee_types_header
);
1248 bss_entry
->bss_co_2040_offset
= (u16
) (current_ptr
+
1249 sizeof(struct ieee_types_header
) -
1250 bss_entry
->beacon_buf
);
1252 case WLAN_EID_EXT_CAPABILITY
:
1253 bss_entry
->bcn_ext_cap
= current_ptr
+
1254 sizeof(struct ieee_types_header
);
1255 bss_entry
->ext_cap_offset
= (u16
) (current_ptr
+
1256 sizeof(struct ieee_types_header
) -
1257 bss_entry
->beacon_buf
);
1263 current_ptr
+= element_len
+ 2;
1265 /* Need to account for IE ID and IE Len */
1266 bytes_left
-= (element_len
+ 2);
1268 } /* while (bytes_left > 2) */
1273 * This function converts radio type scan parameter to a band configuration
1274 * to be used in join command.
1277 mwifiex_radio_type_to_band(u8 radio_type
)
1279 switch (radio_type
) {
1280 case HostCmd_SCAN_RADIO_TYPE_A
:
1282 case HostCmd_SCAN_RADIO_TYPE_BG
:
1289 * This is an internal function used to start a scan based on an input
1292 * This uses the input user scan configuration information when provided in
1293 * order to send the appropriate scan commands to firmware to populate or
1294 * update the internal driver scan table.
1296 int mwifiex_scan_networks(struct mwifiex_private
*priv
,
1297 const struct mwifiex_user_scan_cfg
*user_scan_in
)
1300 struct mwifiex_adapter
*adapter
= priv
->adapter
;
1301 struct cmd_ctrl_node
*cmd_node
;
1302 union mwifiex_scan_cmd_config_tlv
*scan_cfg_out
;
1303 struct mwifiex_ie_types_chan_list_param_set
*chan_list_out
;
1305 struct mwifiex_chan_scan_param_set
*scan_chan_list
;
1307 u8 scan_current_chan_only
;
1308 u8 max_chan_per_scan
;
1309 unsigned long flags
;
1311 if (adapter
->scan_processing
) {
1312 dev_err(adapter
->dev
, "cmd: Scan already in process...\n");
1316 if (priv
->scan_block
) {
1317 dev_err(adapter
->dev
,
1318 "cmd: Scan is blocked during association...\n");
1322 spin_lock_irqsave(&adapter
->mwifiex_cmd_lock
, flags
);
1323 adapter
->scan_processing
= true;
1324 spin_unlock_irqrestore(&adapter
->mwifiex_cmd_lock
, flags
);
1326 scan_cfg_out
= kzalloc(sizeof(union mwifiex_scan_cmd_config_tlv
),
1328 if (!scan_cfg_out
) {
1329 dev_err(adapter
->dev
, "failed to alloc scan_cfg_out\n");
1333 buf_size
= sizeof(struct mwifiex_chan_scan_param_set
) *
1334 MWIFIEX_USER_SCAN_CHAN_MAX
;
1335 scan_chan_list
= kzalloc(buf_size
, GFP_KERNEL
);
1336 if (!scan_chan_list
) {
1337 dev_err(adapter
->dev
, "failed to alloc scan_chan_list\n");
1338 kfree(scan_cfg_out
);
1342 mwifiex_config_scan(priv
, user_scan_in
, &scan_cfg_out
->config
,
1343 &chan_list_out
, scan_chan_list
, &max_chan_per_scan
,
1344 &filtered_scan
, &scan_current_chan_only
);
1346 ret
= mwifiex_scan_channel_list(priv
, max_chan_per_scan
, filtered_scan
,
1347 &scan_cfg_out
->config
, chan_list_out
,
1350 /* Get scan command from scan_pending_q and put to cmd_pending_q */
1352 spin_lock_irqsave(&adapter
->scan_pending_q_lock
, flags
);
1353 if (!list_empty(&adapter
->scan_pending_q
)) {
1354 cmd_node
= list_first_entry(&adapter
->scan_pending_q
,
1355 struct cmd_ctrl_node
, list
);
1356 list_del(&cmd_node
->list
);
1357 spin_unlock_irqrestore(&adapter
->scan_pending_q_lock
,
1359 adapter
->cmd_queued
= cmd_node
;
1360 mwifiex_insert_cmd_to_pending_q(adapter
, cmd_node
,
1362 queue_work(adapter
->workqueue
, &adapter
->main_work
);
1364 spin_unlock_irqrestore(&adapter
->scan_pending_q_lock
,
1368 spin_lock_irqsave(&adapter
->mwifiex_cmd_lock
, flags
);
1369 adapter
->scan_processing
= true;
1370 spin_unlock_irqrestore(&adapter
->mwifiex_cmd_lock
, flags
);
1373 kfree(scan_cfg_out
);
1374 kfree(scan_chan_list
);
1379 * This function prepares a scan command to be sent to the firmware.
1381 * This uses the scan command configuration sent to the command processing
1382 * module in command preparation stage to configure a scan command structure
1383 * to send to firmware.
1385 * The fixed fields specifying the BSS type and BSSID filters as well as a
1386 * variable number/length of TLVs are sent in the command to firmware.
1388 * Preparation also includes -
1389 * - Setting command ID, and proper size
1390 * - Ensuring correct endian-ness
1392 int mwifiex_cmd_802_11_scan(struct host_cmd_ds_command
*cmd
,
1393 struct mwifiex_scan_cmd_config
*scan_cfg
)
1395 struct host_cmd_ds_802_11_scan
*scan_cmd
= &cmd
->params
.scan
;
1397 /* Set fixed field variables in scan command */
1398 scan_cmd
->bss_mode
= scan_cfg
->bss_mode
;
1399 memcpy(scan_cmd
->bssid
, scan_cfg
->specific_bssid
,
1400 sizeof(scan_cmd
->bssid
));
1401 memcpy(scan_cmd
->tlv_buffer
, scan_cfg
->tlv_buf
, scan_cfg
->tlv_buf_len
);
1403 cmd
->command
= cpu_to_le16(HostCmd_CMD_802_11_SCAN
);
1405 /* Size is equal to the sizeof(fixed portions) + the TLV len + header */
1406 cmd
->size
= cpu_to_le16((u16
) (sizeof(scan_cmd
->bss_mode
)
1407 + sizeof(scan_cmd
->bssid
)
1408 + scan_cfg
->tlv_buf_len
+ S_DS_GEN
));
1414 * This function checks compatibility of requested network with current
1417 int mwifiex_check_network_compatibility(struct mwifiex_private
*priv
,
1418 struct mwifiex_bssdescriptor
*bss_desc
)
1425 if ((mwifiex_get_cfp(priv
, (u8
) bss_desc
->bss_band
,
1426 (u16
) bss_desc
->channel
, 0))) {
1427 switch (priv
->bss_mode
) {
1428 case NL80211_IFTYPE_STATION
:
1429 case NL80211_IFTYPE_ADHOC
:
1430 ret
= mwifiex_is_network_compatible(priv
, bss_desc
,
1433 dev_err(priv
->adapter
->dev
, "cannot find ssid "
1434 "%s\n", bss_desc
->ssid
.ssid
);
1444 static int mwifiex_update_curr_bss_params(struct mwifiex_private
*priv
,
1445 struct cfg80211_bss
*bss
)
1447 struct mwifiex_bssdescriptor
*bss_desc
;
1449 unsigned long flags
;
1451 /* Allocate and fill new bss descriptor */
1452 bss_desc
= kzalloc(sizeof(struct mwifiex_bssdescriptor
),
1455 dev_err(priv
->adapter
->dev
, " failed to alloc bss_desc\n");
1459 ret
= mwifiex_fill_new_bss_desc(priv
, bss
, bss_desc
);
1463 ret
= mwifiex_check_network_compatibility(priv
, bss_desc
);
1467 /* Update current bss descriptor parameters */
1468 spin_lock_irqsave(&priv
->curr_bcn_buf_lock
, flags
);
1469 priv
->curr_bss_params
.bss_descriptor
.bcn_wpa_ie
= NULL
;
1470 priv
->curr_bss_params
.bss_descriptor
.wpa_offset
= 0;
1471 priv
->curr_bss_params
.bss_descriptor
.bcn_rsn_ie
= NULL
;
1472 priv
->curr_bss_params
.bss_descriptor
.rsn_offset
= 0;
1473 priv
->curr_bss_params
.bss_descriptor
.bcn_wapi_ie
= NULL
;
1474 priv
->curr_bss_params
.bss_descriptor
.wapi_offset
= 0;
1475 priv
->curr_bss_params
.bss_descriptor
.bcn_ht_cap
= NULL
;
1476 priv
->curr_bss_params
.bss_descriptor
.ht_cap_offset
=
1478 priv
->curr_bss_params
.bss_descriptor
.bcn_ht_oper
= NULL
;
1479 priv
->curr_bss_params
.bss_descriptor
.ht_info_offset
=
1481 priv
->curr_bss_params
.bss_descriptor
.bcn_bss_co_2040
=
1483 priv
->curr_bss_params
.bss_descriptor
.
1484 bss_co_2040_offset
= 0;
1485 priv
->curr_bss_params
.bss_descriptor
.bcn_ext_cap
= NULL
;
1486 priv
->curr_bss_params
.bss_descriptor
.ext_cap_offset
= 0;
1487 priv
->curr_bss_params
.bss_descriptor
.beacon_buf
= NULL
;
1488 priv
->curr_bss_params
.bss_descriptor
.beacon_buf_size
=
1491 /* Make a copy of current BSSID descriptor */
1492 memcpy(&priv
->curr_bss_params
.bss_descriptor
, bss_desc
,
1493 sizeof(priv
->curr_bss_params
.bss_descriptor
));
1494 mwifiex_save_curr_bcn(priv
);
1495 spin_unlock_irqrestore(&priv
->curr_bcn_buf_lock
, flags
);
1503 * This function handles the command response of scan.
1505 * The response buffer for the scan command has the following
1508 * .-------------------------------------------------------------.
1509 * | Header (4 * sizeof(t_u16)): Standard command response hdr |
1510 * .-------------------------------------------------------------.
1511 * | BufSize (t_u16) : sizeof the BSS Description data |
1512 * .-------------------------------------------------------------.
1513 * | NumOfSet (t_u8) : Number of BSS Descs returned |
1514 * .-------------------------------------------------------------.
1515 * | BSSDescription data (variable, size given in BufSize) |
1516 * .-------------------------------------------------------------.
1517 * | TLV data (variable, size calculated using Header->Size, |
1518 * | BufSize and sizeof the fixed fields above) |
1519 * .-------------------------------------------------------------.
1521 int mwifiex_ret_802_11_scan(struct mwifiex_private
*priv
,
1522 struct host_cmd_ds_command
*resp
)
1525 struct mwifiex_adapter
*adapter
= priv
->adapter
;
1526 struct cmd_ctrl_node
*cmd_node
;
1527 struct host_cmd_ds_802_11_scan_rsp
*scan_rsp
;
1528 struct mwifiex_ie_types_data
*tlv_data
;
1529 struct mwifiex_ie_types_tsf_timestamp
*tsf_tlv
;
1535 struct mwifiex_chan_freq_power
*cfp
;
1536 struct mwifiex_ie_types_chan_band_list_param_set
*chan_band_tlv
;
1537 struct chan_band_param_set
*chan_band
;
1539 unsigned long flags
;
1540 struct cfg80211_bss
*bss
;
1542 is_bgscan_resp
= (le16_to_cpu(resp
->command
)
1543 == HostCmd_CMD_802_11_BG_SCAN_QUERY
);
1545 scan_rsp
= &resp
->params
.bg_scan_query_resp
.scan_resp
;
1547 scan_rsp
= &resp
->params
.scan_resp
;
1550 if (scan_rsp
->number_of_sets
> MWIFIEX_MAX_AP
) {
1551 dev_err(adapter
->dev
, "SCAN_RESP: too many AP returned (%d)\n",
1552 scan_rsp
->number_of_sets
);
1557 bytes_left
= le16_to_cpu(scan_rsp
->bss_descript_size
);
1558 dev_dbg(adapter
->dev
, "info: SCAN_RESP: bss_descript_size %d\n",
1561 scan_resp_size
= le16_to_cpu(resp
->size
);
1563 dev_dbg(adapter
->dev
,
1564 "info: SCAN_RESP: returned %d APs before parsing\n",
1565 scan_rsp
->number_of_sets
);
1567 bss_info
= scan_rsp
->bss_desc_and_tlv_buffer
;
1570 * The size of the TLV buffer is equal to the entire command response
1571 * size (scan_resp_size) minus the fixed fields (sizeof()'s), the
1572 * BSS Descriptions (bss_descript_size as bytesLef) and the command
1573 * response header (S_DS_GEN)
1575 tlv_buf_size
= scan_resp_size
- (bytes_left
1576 + sizeof(scan_rsp
->bss_descript_size
)
1577 + sizeof(scan_rsp
->number_of_sets
)
1580 tlv_data
= (struct mwifiex_ie_types_data
*) (scan_rsp
->
1581 bss_desc_and_tlv_buffer
+
1584 /* Search the TLV buffer space in the scan response for any valid
1586 mwifiex_ret_802_11_scan_get_tlv_ptrs(adapter
, tlv_data
, tlv_buf_size
,
1587 TLV_TYPE_TSFTIMESTAMP
,
1588 (struct mwifiex_ie_types_data
**)
1591 /* Search the TLV buffer space in the scan response for any valid
1593 mwifiex_ret_802_11_scan_get_tlv_ptrs(adapter
, tlv_data
, tlv_buf_size
,
1594 TLV_TYPE_CHANNELBANDLIST
,
1595 (struct mwifiex_ie_types_data
**)
1598 for (idx
= 0; idx
< scan_rsp
->number_of_sets
&& bytes_left
; idx
++) {
1605 u16 beacon_size
= 0;
1609 u16 cap_info_bitmap
;
1612 struct mwifiex_bcn_param
*bcn_param
;
1613 struct mwifiex_bss_priv
*bss_priv
;
1615 if (bytes_left
>= sizeof(beacon_size
)) {
1616 /* Extract & convert beacon size from command buffer */
1617 memcpy(&beacon_size
, bss_info
, sizeof(beacon_size
));
1618 bytes_left
-= sizeof(beacon_size
);
1619 bss_info
+= sizeof(beacon_size
);
1622 if (!beacon_size
|| beacon_size
> bytes_left
) {
1623 bss_info
+= bytes_left
;
1628 /* Initialize the current working beacon pointer for this BSS
1630 current_ptr
= bss_info
;
1632 /* Advance the return beacon pointer past the current beacon */
1633 bss_info
+= beacon_size
;
1634 bytes_left
-= beacon_size
;
1636 curr_bcn_bytes
= beacon_size
;
1639 * First 5 fields are bssid, RSSI, time stamp, beacon interval,
1640 * and capability information
1642 if (curr_bcn_bytes
< sizeof(struct mwifiex_bcn_param
)) {
1643 dev_err(adapter
->dev
,
1644 "InterpretIE: not enough bytes left\n");
1647 bcn_param
= (struct mwifiex_bcn_param
*)current_ptr
;
1648 current_ptr
+= sizeof(*bcn_param
);
1649 curr_bcn_bytes
-= sizeof(*bcn_param
);
1651 memcpy(bssid
, bcn_param
->bssid
, ETH_ALEN
);
1653 rssi
= (s32
) bcn_param
->rssi
;
1654 rssi
= (-rssi
) * 100; /* Convert dBm to mBm */
1655 dev_dbg(adapter
->dev
, "info: InterpretIE: RSSI=%d\n", rssi
);
1657 timestamp
= le64_to_cpu(bcn_param
->timestamp
);
1658 beacon_period
= le16_to_cpu(bcn_param
->beacon_period
);
1660 cap_info_bitmap
= le16_to_cpu(bcn_param
->cap_info_bitmap
);
1661 dev_dbg(adapter
->dev
, "info: InterpretIE: capabilities=0x%X\n",
1664 /* Rest of the current buffer are IE's */
1665 ie_buf
= current_ptr
;
1666 ie_len
= curr_bcn_bytes
;
1667 dev_dbg(adapter
->dev
,
1668 "info: InterpretIE: IELength for this AP = %d\n",
1671 while (curr_bcn_bytes
>= sizeof(struct ieee_types_header
)) {
1672 u8 element_id
, element_len
;
1674 element_id
= *current_ptr
;
1675 element_len
= *(current_ptr
+ 1);
1676 if (curr_bcn_bytes
< element_len
+
1677 sizeof(struct ieee_types_header
)) {
1678 dev_err(priv
->adapter
->dev
,
1679 "%s: bytes left < IE length\n",
1683 if (element_id
== WLAN_EID_DS_PARAMS
) {
1684 channel
= *(current_ptr
+ sizeof(struct ieee_types_header
));
1688 current_ptr
+= element_len
+
1689 sizeof(struct ieee_types_header
);
1690 curr_bcn_bytes
-= element_len
+
1691 sizeof(struct ieee_types_header
);
1695 * If the TSF TLV was appended to the scan results, save this
1696 * entry's TSF value in the fw_tsf field. It is the firmware's
1697 * TSF value at the time the beacon or probe response was
1701 memcpy(&fw_tsf
, &tsf_tlv
->tsf_data
[idx
* TSF_DATA_SIZE
],
1705 struct ieee80211_channel
*chan
;
1709 if (chan_band_tlv
) {
1711 &chan_band_tlv
->chan_band_param
[idx
];
1712 band
= mwifiex_radio_type_to_band(
1713 chan_band
->radio_type
1714 & (BIT(0) | BIT(1)));
1717 cfp
= mwifiex_get_cfp(priv
, band
, channel
, 0);
1719 freq
= cfp
? cfp
->freq
: 0;
1721 chan
= ieee80211_get_channel(priv
->wdev
->wiphy
, freq
);
1723 if (chan
&& !(chan
->flags
& IEEE80211_CHAN_DISABLED
)) {
1724 bss
= cfg80211_inform_bss(priv
->wdev
->wiphy
,
1725 chan
, bssid
, timestamp
,
1726 cap_info_bitmap
, beacon_period
,
1727 ie_buf
, ie_len
, rssi
, GFP_KERNEL
);
1728 bss_priv
= (struct mwifiex_bss_priv
*)bss
->priv
;
1729 bss_priv
->band
= band
;
1730 bss_priv
->fw_tsf
= fw_tsf
;
1731 if (priv
->media_connected
&&
1733 priv
->curr_bss_params
.bss_descriptor
1734 .mac_address
, ETH_ALEN
))
1735 mwifiex_update_curr_bss_params(priv
,
1737 cfg80211_put_bss(bss
);
1740 dev_dbg(adapter
->dev
, "missing BSS channel IE\n");
1744 spin_lock_irqsave(&adapter
->scan_pending_q_lock
, flags
);
1745 if (list_empty(&adapter
->scan_pending_q
)) {
1746 spin_unlock_irqrestore(&adapter
->scan_pending_q_lock
, flags
);
1747 spin_lock_irqsave(&adapter
->mwifiex_cmd_lock
, flags
);
1748 adapter
->scan_processing
= false;
1749 spin_unlock_irqrestore(&adapter
->mwifiex_cmd_lock
, flags
);
1751 /* Need to indicate IOCTL complete */
1752 if (adapter
->curr_cmd
->wait_q_enabled
) {
1753 adapter
->cmd_wait_q
.status
= 0;
1754 mwifiex_complete_cmd(adapter
, adapter
->curr_cmd
);
1756 if (priv
->report_scan_result
)
1757 priv
->report_scan_result
= false;
1758 if (priv
->scan_pending_on_block
) {
1759 priv
->scan_pending_on_block
= false;
1760 up(&priv
->async_sem
);
1763 if (priv
->user_scan_cfg
) {
1764 dev_dbg(priv
->adapter
->dev
,
1765 "info: %s: sending scan results\n", __func__
);
1766 cfg80211_scan_done(priv
->scan_request
, 0);
1767 priv
->scan_request
= NULL
;
1768 kfree(priv
->user_scan_cfg
);
1769 priv
->user_scan_cfg
= NULL
;
1772 if (!mwifiex_wmm_lists_empty(adapter
)) {
1773 spin_unlock_irqrestore(&adapter
->scan_pending_q_lock
,
1775 adapter
->scan_delay_cnt
= 1;
1776 mod_timer(&priv
->scan_delay_timer
, jiffies
+
1777 msecs_to_jiffies(MWIFIEX_SCAN_DELAY_MSEC
));
1779 /* Get scan command from scan_pending_q and put to
1781 cmd_node
= list_first_entry(&adapter
->scan_pending_q
,
1782 struct cmd_ctrl_node
, list
);
1783 list_del(&cmd_node
->list
);
1784 spin_unlock_irqrestore(&adapter
->scan_pending_q_lock
,
1786 mwifiex_insert_cmd_to_pending_q(adapter
, cmd_node
,
1796 * This function prepares command for background scan query.
1798 * Preparation includes -
1799 * - Setting command ID and proper size
1800 * - Setting background scan flush parameter
1801 * - Ensuring correct endian-ness
1803 int mwifiex_cmd_802_11_bg_scan_query(struct host_cmd_ds_command
*cmd
)
1805 struct host_cmd_ds_802_11_bg_scan_query
*bg_query
=
1806 &cmd
->params
.bg_scan_query
;
1808 cmd
->command
= cpu_to_le16(HostCmd_CMD_802_11_BG_SCAN_QUERY
);
1809 cmd
->size
= cpu_to_le16(sizeof(struct host_cmd_ds_802_11_bg_scan_query
)
1812 bg_query
->flush
= 1;
1818 * This function inserts scan command node to the scan pending queue.
1821 mwifiex_queue_scan_cmd(struct mwifiex_private
*priv
,
1822 struct cmd_ctrl_node
*cmd_node
)
1824 struct mwifiex_adapter
*adapter
= priv
->adapter
;
1825 unsigned long flags
;
1827 cmd_node
->wait_q_enabled
= true;
1828 cmd_node
->condition
= &adapter
->scan_wait_q_woken
;
1829 spin_lock_irqsave(&adapter
->scan_pending_q_lock
, flags
);
1830 list_add_tail(&cmd_node
->list
, &adapter
->scan_pending_q
);
1831 spin_unlock_irqrestore(&adapter
->scan_pending_q_lock
, flags
);
1835 * This function sends a scan command for all available channels to the
1836 * firmware, filtered on a specific SSID.
1838 static int mwifiex_scan_specific_ssid(struct mwifiex_private
*priv
,
1839 struct cfg80211_ssid
*req_ssid
)
1841 struct mwifiex_adapter
*adapter
= priv
->adapter
;
1843 struct mwifiex_user_scan_cfg
*scan_cfg
;
1848 if (adapter
->scan_processing
) {
1849 dev_dbg(adapter
->dev
, "cmd: Scan already in process...\n");
1853 if (priv
->scan_block
) {
1854 dev_dbg(adapter
->dev
,
1855 "cmd: Scan is blocked during association...\n");
1859 scan_cfg
= kzalloc(sizeof(struct mwifiex_user_scan_cfg
), GFP_KERNEL
);
1861 dev_err(adapter
->dev
, "failed to alloc scan_cfg\n");
1865 scan_cfg
->ssid_list
= req_ssid
;
1866 scan_cfg
->num_ssids
= 1;
1868 ret
= mwifiex_scan_networks(priv
, scan_cfg
);
1875 * Sends IOCTL request to start a scan.
1877 * This function allocates the IOCTL request buffer, fills it
1878 * with requisite parameters and calls the IOCTL handler.
1880 * Scan command can be issued for both normal scan and specific SSID
1881 * scan, depending upon whether an SSID is provided or not.
1883 int mwifiex_request_scan(struct mwifiex_private
*priv
,
1884 struct cfg80211_ssid
*req_ssid
)
1888 if (down_interruptible(&priv
->async_sem
)) {
1889 dev_err(priv
->adapter
->dev
, "%s: acquire semaphore\n",
1893 priv
->scan_pending_on_block
= true;
1895 priv
->adapter
->scan_wait_q_woken
= false;
1897 if (req_ssid
&& req_ssid
->ssid_len
!= 0)
1898 /* Specific SSID scan */
1899 ret
= mwifiex_scan_specific_ssid(priv
, req_ssid
);
1902 ret
= mwifiex_scan_networks(priv
, NULL
);
1905 ret
= mwifiex_wait_queue_complete(priv
->adapter
);
1908 priv
->scan_pending_on_block
= false;
1909 up(&priv
->async_sem
);
1916 * This function appends the vendor specific IE TLV to a buffer.
1919 mwifiex_cmd_append_vsie_tlv(struct mwifiex_private
*priv
,
1920 u16 vsie_mask
, u8
**buffer
)
1922 int id
, ret_len
= 0;
1923 struct mwifiex_ie_types_vendor_param_set
*vs_param_set
;
1931 * Traverse through the saved vendor specific IE array and append
1932 * the selected(scan/assoc/adhoc) IE as TLV to the command
1934 for (id
= 0; id
< MWIFIEX_MAX_VSIE_NUM
; id
++) {
1935 if (priv
->vs_ie
[id
].mask
& vsie_mask
) {
1937 (struct mwifiex_ie_types_vendor_param_set
*)
1939 vs_param_set
->header
.type
=
1940 cpu_to_le16(TLV_TYPE_PASSTHROUGH
);
1941 vs_param_set
->header
.len
=
1942 cpu_to_le16((((u16
) priv
->vs_ie
[id
].ie
[1])
1944 memcpy(vs_param_set
->ie
, priv
->vs_ie
[id
].ie
,
1945 le16_to_cpu(vs_param_set
->header
.len
));
1946 *buffer
+= le16_to_cpu(vs_param_set
->header
.len
) +
1947 sizeof(struct mwifiex_ie_types_header
);
1948 ret_len
+= le16_to_cpu(vs_param_set
->header
.len
) +
1949 sizeof(struct mwifiex_ie_types_header
);
1956 * This function saves a beacon buffer of the current BSS descriptor.
1958 * The current beacon buffer is saved so that it can be restored in the
1959 * following cases that makes the beacon buffer not to contain the current
1960 * ssid's beacon buffer.
1961 * - The current ssid was not found somehow in the last scan.
1962 * - The current ssid was the last entry of the scan table and overloaded.
1965 mwifiex_save_curr_bcn(struct mwifiex_private
*priv
)
1967 struct mwifiex_bssdescriptor
*curr_bss
=
1968 &priv
->curr_bss_params
.bss_descriptor
;
1970 if (!curr_bss
->beacon_buf_size
)
1973 /* allocate beacon buffer at 1st time; or if it's size has changed */
1974 if (!priv
->curr_bcn_buf
||
1975 priv
->curr_bcn_size
!= curr_bss
->beacon_buf_size
) {
1976 priv
->curr_bcn_size
= curr_bss
->beacon_buf_size
;
1978 kfree(priv
->curr_bcn_buf
);
1979 priv
->curr_bcn_buf
= kmalloc(curr_bss
->beacon_buf_size
,
1981 if (!priv
->curr_bcn_buf
) {
1982 dev_err(priv
->adapter
->dev
,
1983 "failed to alloc curr_bcn_buf\n");
1988 memcpy(priv
->curr_bcn_buf
, curr_bss
->beacon_buf
,
1989 curr_bss
->beacon_buf_size
);
1990 dev_dbg(priv
->adapter
->dev
, "info: current beacon saved %d\n",
1991 priv
->curr_bcn_size
);
1993 curr_bss
->beacon_buf
= priv
->curr_bcn_buf
;
1995 /* adjust the pointers in the current BSS descriptor */
1996 if (curr_bss
->bcn_wpa_ie
)
1997 curr_bss
->bcn_wpa_ie
=
1998 (struct ieee_types_vendor_specific
*)
1999 (curr_bss
->beacon_buf
+
2000 curr_bss
->wpa_offset
);
2002 if (curr_bss
->bcn_rsn_ie
)
2003 curr_bss
->bcn_rsn_ie
= (struct ieee_types_generic
*)
2004 (curr_bss
->beacon_buf
+
2005 curr_bss
->rsn_offset
);
2007 if (curr_bss
->bcn_ht_cap
)
2008 curr_bss
->bcn_ht_cap
= (struct ieee80211_ht_cap
*)
2009 (curr_bss
->beacon_buf
+
2010 curr_bss
->ht_cap_offset
);
2012 if (curr_bss
->bcn_ht_oper
)
2013 curr_bss
->bcn_ht_oper
= (struct ieee80211_ht_operation
*)
2014 (curr_bss
->beacon_buf
+
2015 curr_bss
->ht_info_offset
);
2017 if (curr_bss
->bcn_bss_co_2040
)
2018 curr_bss
->bcn_bss_co_2040
=
2019 (curr_bss
->beacon_buf
+ curr_bss
->bss_co_2040_offset
);
2021 if (curr_bss
->bcn_ext_cap
)
2022 curr_bss
->bcn_ext_cap
= curr_bss
->beacon_buf
+
2023 curr_bss
->ext_cap_offset
;
2027 * This function frees the current BSS descriptor beacon buffer.
2030 mwifiex_free_curr_bcn(struct mwifiex_private
*priv
)
2032 kfree(priv
->curr_bcn_buf
);
2033 priv
->curr_bcn_buf
= NULL
;