drivers/net/wireless/orinoco/Kconfig

   1 config HERMES
   2         tristate "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)"
   3         depends on (PPC_PMAC || PCI || PCMCIA)
   4         depends on CFG80211
   5         select CFG80211_WEXT
   6         select WIRELESS_EXT
   7         select WEXT_SPY
   8         select WEXT_PRIV
   9         select FW_LOADER
  10         select CRYPTO
  11         select CRYPTO_MICHAEL_MIC
  12         ---help---
  13           A driver for 802.11b wireless cards based on the "Hermes" or
  14           Intersil HFA384x (Prism 2) MAC controller.  This includes the vast
  15           majority of the PCMCIA 802.11b cards (which are nearly all rebadges)
  16           - except for the Cisco/Aironet cards.  Cards supported include the
  17           Apple Airport (not a PCMCIA card), WavelanIEEE/Orinoco,
  18           Cabletron/EnteraSys Roamabout, ELSA AirLancer, MELCO Buffalo, Avaya,
  19           IBM High Rate Wireless, Farralon Syyline, Samsung MagicLAN, Netgear
  20           MA401, LinkSys WPC-11, D-Link DWL-650, 3Com AirConnect, Intel
  21           IPW2011, and Symbol Spectrum24 High Rate amongst others.
  22
  23           This option includes the guts of the driver, but in order to
  24           actually use a card you will also need to enable support for PCMCIA
  25           Hermes cards, PLX9052 based PCI adaptors or the Apple Airport below.
  26
  27           You will also very likely also need the Wireless Tools in order to
  28           configure your card and that /etc/pcmcia/wireless.opts works :
  29           <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>
  30
  31 config HERMES_PRISM
  32         bool "Support Prism 2/2.5 chipset"
  33         depends on HERMES
  34         ---help---
  35
  36           Say Y to enable support for Prism 2 and 2.5 chipsets.  These
  37           chipsets are better handled by the hostap driver.  This driver
  38           would not support WPA or firmware download for Prism chipset.
  39
  40           If you are not sure, say N.
  41
  42 config HERMES_CACHE_FW_ON_INIT
  43         bool "Cache Hermes firmware on driver initialisation"
  44         depends on HERMES
  45         default y
  46         ---help---
  47           Say Y to cache any firmware required by the Hermes drivers
  48           on startup.  The firmware will remain cached until the
  49           driver is unloaded.  The cache uses 64K of RAM.
  50
  51           Otherwise load the firmware from userspace as required.  In
  52           this case the driver should be unloaded and restarted
  53           whenever the firmware is changed.
  54
  55           If you are not sure, say Y.
  56
  57 config APPLE_AIRPORT
  58         tristate "Apple Airport support (built-in)"
  59         depends on PPC_PMAC && HERMES
  60         help
  61           Say Y here to support the Airport 802.11b wireless Ethernet hardware
  62           built into the Macintosh iBook and other recent PowerPC-based
  63           Macintosh machines. This is essentially a Lucent Orinoco card with
  64           a non-standard interface.
  65
  66           This driver does not support the Airport Extreme (802.11b/g). Use
  67           the BCM43xx driver for Airport Extreme cards.
  68
  69 config PLX_HERMES
  70         tristate "Hermes in PLX9052 based PCI adaptor support (Netgear MA301 etc.)"
  71         depends on PCI && HERMES
  72         help
  73           Enable support for PCMCIA cards supported by the "Hermes" (aka
  74           orinoco) driver when used in PLX9052 based PCI adaptors.  These
  75           adaptors are not a full PCMCIA controller but act as a more limited
  76           PCI <-> PCMCIA bridge.  Several vendors sell such adaptors so that
  77           802.11b PCMCIA cards can be used in desktop machines.  The Netgear
  78           MA301 is such an adaptor.
  79
  80 config TMD_HERMES
  81         tristate "Hermes in TMD7160 based PCI adaptor support"
  82         depends on PCI && HERMES
  83         help
  84           Enable support for PCMCIA cards supported by the "Hermes" (aka
  85           orinoco) driver when used in TMD7160 based PCI adaptors.  These
  86           adaptors are not a full PCMCIA controller but act as a more limited
  87           PCI <-> PCMCIA bridge.  Several vendors sell such adaptors so that
  88           802.11b PCMCIA cards can be used in desktop machines.
  89
  90 config NORTEL_HERMES
  91         tristate "Nortel emobility PCI adaptor support"
  92         depends on PCI && HERMES
  93         help
  94           Enable support for PCMCIA cards supported by the "Hermes" (aka
  95           orinoco) driver when used in Nortel emobility PCI adaptors.  These
  96           adaptors are not full PCMCIA controllers, but act as a more limited
  97           PCI <-> PCMCIA bridge.
  98
  99 config PCI_HERMES
 100         tristate "Prism 2.5 PCI 802.11b adaptor support"
 101         depends on PCI && HERMES && HERMES_PRISM
 102         help
 103           Enable support for PCI and mini-PCI 802.11b wireless NICs based on
 104           the Prism 2.5 chipset.  These are true PCI cards, not the 802.11b
 105           PCMCIA cards bundled with PCI<->PCMCIA adaptors which are also
 106           common.  Some of the built-in wireless adaptors in laptops are of
 107           this variety.
 108
 109 config PCMCIA_HERMES
 110         tristate "Hermes PCMCIA card support"
 111         depends on PCMCIA && HERMES && HAS_IOPORT_MAP
 112         ---help---
 113           A driver for "Hermes" chipset based PCMCIA wireless adaptors, such
 114           as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/
 115           EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and
 116           others).  It should also be usable on various Prism II based cards
 117           such as the Linksys, D-Link and Farallon Skyline.  It should also
 118           work on Symbol cards such as the 3Com AirConnect and Ericsson WLAN.
 119
 120           You will very likely need the Wireless Tools in order to
 121           configure your card and that /etc/pcmcia/wireless.opts works:
 122           <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
 123
 124 config PCMCIA_SPECTRUM
 125         tristate "Symbol Spectrum24 Trilogy PCMCIA card support"
 126         depends on PCMCIA && HERMES && HAS_IOPORT_MAP
 127         ---help---
 128
 129           This is a driver for 802.11b cards using RAM-loadable Symbol
 130           firmware, such as Symbol Wireless Networker LA4100, CompactFlash
 131           cards by Socket Communications and Intel PRO/Wireless 2011B.
 132
 133           This driver requires firmware download on startup.  Utilities
 134           for downloading Symbol firmware are available at
 135           <http://sourceforge.net/projects/orinoco/>
 136
 137 config ORINOCO_USB
 138         tristate "Agere Orinoco USB support"
 139         depends on USB && HERMES
 140         select FW_LOADER
 141         ---help---
 142           This driver is for USB versions of the Agere Orinoco card.