1 /* orinoco_cs.c (formerly known as dldwd_cs.c)
3 * A driver for "Hermes" chipset based PCMCIA wireless adaptors, such
4 * as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/
5 * EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and others).
6 * It should also be usable on various Prism II based cards such as the
7 * Linksys, D-Link and Farallon Skyline. It should also work on Symbol
8 * cards such as the 3Com AirConnect and Ericsson WLAN.
10 * Copyright notice & release notes in file orinoco.c
13 #define DRIVER_NAME "orinoco_cs"
14 #define PFX DRIVER_NAME ": "
16 #include <linux/module.h>
17 #include <linux/kernel.h>
18 #include <linux/init.h>
19 #include <linux/delay.h>
20 #include <pcmcia/cs_types.h>
21 #include <pcmcia/cs.h>
22 #include <pcmcia/cistpl.h>
23 #include <pcmcia/cisreg.h>
24 #include <pcmcia/ds.h>
28 /********************************************************************/
30 /********************************************************************/
32 MODULE_AUTHOR("David Gibson <hermes@gibson.dropbear.id.au>");
33 MODULE_DESCRIPTION("Driver for PCMCIA Lucent Orinoco, Prism II based and similar wireless cards");
34 MODULE_LICENSE("Dual MPL/GPL");
36 /* Module parameters */
38 /* Some D-Link cards have buggy CIS. They do work at 5v properly, but
39 * don't have any CIS entry for it. This workaround it... */
40 static int ignore_cis_vcc
; /* = 0 */
41 module_param(ignore_cis_vcc
, int, 0);
42 MODULE_PARM_DESC(ignore_cis_vcc
, "Allow voltage mismatch between card and socket");
44 /********************************************************************/
46 /********************************************************************/
48 /* PCMCIA specific device information (goes in the card field of
49 * struct orinoco_private */
50 struct orinoco_pccard
{
51 struct pcmcia_device
*p_dev
;
54 /* Used to handle hard reset */
55 /* yuck, we need this hack to work around the insanity of the
57 unsigned long hard_reset_in_progress
;
61 /********************************************************************/
62 /* Function prototypes */
63 /********************************************************************/
65 static int orinoco_cs_config(struct pcmcia_device
*link
);
66 static void orinoco_cs_release(struct pcmcia_device
*link
);
67 static void orinoco_cs_detach(struct pcmcia_device
*p_dev
);
69 /********************************************************************/
71 /********************************************************************/
74 orinoco_cs_hard_reset(struct orinoco_private
*priv
)
76 struct orinoco_pccard
*card
= priv
->card
;
77 struct pcmcia_device
*link
= card
->p_dev
;
80 /* We need atomic ops here, because we're not holding the lock */
81 set_bit(0, &card
->hard_reset_in_progress
);
83 err
= pcmcia_reset_card(link
, NULL
);
88 clear_bit(0, &card
->hard_reset_in_progress
);
93 /********************************************************************/
95 /********************************************************************/
98 * This creates an "instance" of the driver, allocating local data
99 * structures for one device. The device is registered with Card
102 * The dev_link structure is initialized, but we don't actually
103 * configure the card at this point -- we wait until we receive a card
104 * insertion event. */
106 orinoco_cs_probe(struct pcmcia_device
*link
)
108 struct net_device
*dev
;
109 struct orinoco_private
*priv
;
110 struct orinoco_pccard
*card
;
112 dev
= alloc_orinocodev(sizeof(*card
), &handle_to_dev(link
),
113 orinoco_cs_hard_reset
, NULL
);
116 priv
= netdev_priv(dev
);
119 /* Link both structures together */
123 /* Interrupt setup */
124 link
->irq
.Attributes
= IRQ_TYPE_DYNAMIC_SHARING
| IRQ_HANDLE_PRESENT
;
125 link
->irq
.IRQInfo1
= IRQ_LEVEL_ID
;
126 link
->irq
.Handler
= orinoco_interrupt
;
127 link
->irq
.Instance
= dev
;
129 /* General socket configuration defaults can go here. In this
130 * client, we assume very little, and rely on the CIS for
131 * almost everything. In most clients, many details (i.e.,
132 * number, sizes, and attributes of IO windows) are fixed by
133 * the nature of the device, and can be hard-wired here. */
134 link
->conf
.Attributes
= 0;
135 link
->conf
.IntType
= INT_MEMORY_AND_IO
;
137 return orinoco_cs_config(link
);
138 } /* orinoco_cs_attach */
141 * This deletes a driver "instance". The device is de-registered with
142 * Card Services. If it has been released, all local data structures
143 * are freed. Otherwise, the structures will be freed when the device
146 static void orinoco_cs_detach(struct pcmcia_device
*link
)
148 struct net_device
*dev
= link
->priv
;
151 unregister_netdev(dev
);
153 orinoco_cs_release(link
);
155 free_orinocodev(dev
);
156 } /* orinoco_cs_detach */
159 * orinoco_cs_config() is scheduled to run after a CARD_INSERTION
160 * event is received, to configure the PCMCIA socket, and to make the
161 * device available to the system.
164 #define CS_CHECK(fn, ret) do { \
165 last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; \
169 orinoco_cs_config(struct pcmcia_device
*link
)
171 struct net_device
*dev
= link
->priv
;
172 struct orinoco_private
*priv
= netdev_priv(dev
);
173 struct orinoco_pccard
*card
= priv
->card
;
174 hermes_t
*hw
= &priv
->hw
;
175 int last_fn
, last_ret
;
182 /* Look up the current Vcc */
183 CS_CHECK(GetConfigurationInfo
,
184 pcmcia_get_configuration_info(link
, &conf
));
187 * In this loop, we scan the CIS for configuration table
188 * entries, each of which describes a valid card
189 * configuration, including voltage, IO window, memory window,
190 * and interrupt settings.
192 * We make no assumptions about the card to be configured: we
193 * use just the information available in the CIS. In an ideal
194 * world, this would work for any PCMCIA card, but it requires
195 * a complete and accurate CIS. In practice, a driver usually
196 * "knows" most of these things without consulting the CIS,
197 * and most client drivers will only use the CIS to fill in
198 * implementation-defined details.
200 tuple
.Attributes
= 0;
201 tuple
.TupleData
= buf
;
202 tuple
.TupleDataMax
= sizeof(buf
);
203 tuple
.TupleOffset
= 0;
204 tuple
.DesiredTuple
= CISTPL_CFTABLE_ENTRY
;
205 CS_CHECK(GetFirstTuple
, pcmcia_get_first_tuple(link
, &tuple
));
207 cistpl_cftable_entry_t
*cfg
= &(parse
.cftable_entry
);
208 cistpl_cftable_entry_t dflt
= { .index
= 0 };
210 if ( (pcmcia_get_tuple_data(link
, &tuple
) != 0)
211 || (pcmcia_parse_tuple(link
, &tuple
, &parse
) != 0))
214 if (cfg
->flags
& CISTPL_CFTABLE_DEFAULT
)
218 link
->conf
.ConfigIndex
= cfg
->index
;
220 /* Use power settings for Vcc and Vpp if present */
221 /* Note that the CIS values need to be rescaled */
222 if (cfg
->vcc
.present
& (1 << CISTPL_POWER_VNOM
)) {
223 if (conf
.Vcc
!= cfg
->vcc
.param
[CISTPL_POWER_VNOM
] / 10000) {
224 DEBUG(2, "orinoco_cs_config: Vcc mismatch (conf.Vcc = %d, cfg CIS = %d)\n", conf
.Vcc
, cfg
->vcc
.param
[CISTPL_POWER_VNOM
] / 10000);
228 } else if (dflt
.vcc
.present
& (1 << CISTPL_POWER_VNOM
)) {
229 if (conf
.Vcc
!= dflt
.vcc
.param
[CISTPL_POWER_VNOM
] / 10000) {
230 DEBUG(2, "orinoco_cs_config: Vcc mismatch (conf.Vcc = %d, dflt CIS = %d)\n", conf
.Vcc
, dflt
.vcc
.param
[CISTPL_POWER_VNOM
] / 10000);
236 if (cfg
->vpp1
.present
& (1 << CISTPL_POWER_VNOM
))
238 cfg
->vpp1
.param
[CISTPL_POWER_VNOM
] / 10000;
239 else if (dflt
.vpp1
.present
& (1 << CISTPL_POWER_VNOM
))
241 dflt
.vpp1
.param
[CISTPL_POWER_VNOM
] / 10000;
243 /* Do we need to allocate an interrupt? */
244 link
->conf
.Attributes
|= CONF_ENABLE_IRQ
;
246 /* IO window settings */
247 link
->io
.NumPorts1
= link
->io
.NumPorts2
= 0;
248 if ((cfg
->io
.nwin
> 0) || (dflt
.io
.nwin
> 0)) {
250 (cfg
->io
.nwin
) ? &cfg
->io
: &dflt
.io
;
251 link
->io
.Attributes1
= IO_DATA_PATH_WIDTH_AUTO
;
252 if (!(io
->flags
& CISTPL_IO_8BIT
))
253 link
->io
.Attributes1
=
254 IO_DATA_PATH_WIDTH_16
;
255 if (!(io
->flags
& CISTPL_IO_16BIT
))
256 link
->io
.Attributes1
=
257 IO_DATA_PATH_WIDTH_8
;
258 link
->io
.IOAddrLines
=
259 io
->flags
& CISTPL_IO_LINES_MASK
;
260 link
->io
.BasePort1
= io
->win
[0].base
;
261 link
->io
.NumPorts1
= io
->win
[0].len
;
263 link
->io
.Attributes2
=
264 link
->io
.Attributes1
;
265 link
->io
.BasePort2
= io
->win
[1].base
;
266 link
->io
.NumPorts2
= io
->win
[1].len
;
269 /* This reserves IO space but doesn't actually enable it */
270 if (pcmcia_request_io(link
, &link
->io
) != 0)
275 /* If we got this far, we're cool! */
280 pcmcia_disable_device(link
);
281 last_ret
= pcmcia_get_next_tuple(link
, &tuple
);
282 if (last_ret
== CS_NO_MORE_ITEMS
) {
283 printk(KERN_ERR PFX
"GetNextTuple(): No matching "
284 "CIS configuration. Maybe you need the "
285 "ignore_cis_vcc=1 parameter.\n");
291 * Allocate an interrupt line. Note that this does not assign
292 * a handler to the interrupt, unless the 'Handler' member of
293 * the irq structure is initialized.
295 CS_CHECK(RequestIRQ
, pcmcia_request_irq(link
, &link
->irq
));
297 /* We initialize the hermes structure before completing PCMCIA
298 * configuration just in case the interrupt handler gets
300 mem
= ioport_map(link
->io
.BasePort1
, link
->io
.NumPorts1
);
304 hermes_struct_init(hw
, mem
, HERMES_16BIT_REGSPACING
);
307 * This actually configures the PCMCIA socket -- setting up
308 * the I/O windows and the interrupt mapping, and putting the
309 * card and host interface into "Memory and IO" mode.
311 CS_CHECK(RequestConfiguration
,
312 pcmcia_request_configuration(link
, &link
->conf
));
314 /* Ok, we have the configuration, prepare to register the netdev */
315 dev
->base_addr
= link
->io
.BasePort1
;
316 dev
->irq
= link
->irq
.AssignedIRQ
;
317 card
->node
.major
= card
->node
.minor
= 0;
319 SET_NETDEV_DEV(dev
, &handle_to_dev(link
));
320 /* Tell the stack we exist */
321 if (register_netdev(dev
) != 0) {
322 printk(KERN_ERR PFX
"register_netdev() failed\n");
326 /* At this point, the dev_node_t structure(s) needs to be
327 * initialized and arranged in a linked list at link->dev_node. */
328 strcpy(card
->node
.dev_name
, dev
->name
);
329 link
->dev_node
= &card
->node
; /* link->dev_node being non-NULL is also
330 used to indicate that the
331 net_device has been registered */
333 /* Finally, report what we've done */
334 printk(KERN_DEBUG
"%s: " DRIVER_NAME
" at %s, irq %d, io "
335 "0x%04x-0x%04x\n", dev
->name
, dev
->dev
.parent
->bus_id
,
336 link
->irq
.AssignedIRQ
, link
->io
.BasePort1
,
337 link
->io
.BasePort1
+ link
->io
.NumPorts1
- 1);
342 cs_error(link
, last_fn
, last_ret
);
345 orinoco_cs_release(link
);
347 } /* orinoco_cs_config */
350 * After a card is removed, orinoco_cs_release() will unregister the
351 * device, and release the PCMCIA configuration. If the device is
352 * still open, this will be postponed until it is closed.
355 orinoco_cs_release(struct pcmcia_device
*link
)
357 struct net_device
*dev
= link
->priv
;
358 struct orinoco_private
*priv
= netdev_priv(dev
);
361 /* We're committed to taking the device away now, so mark the
362 * hardware as unavailable */
363 spin_lock_irqsave(&priv
->lock
, flags
);
364 priv
->hw_unavailable
++;
365 spin_unlock_irqrestore(&priv
->lock
, flags
);
367 pcmcia_disable_device(link
);
369 ioport_unmap(priv
->hw
.iobase
);
370 } /* orinoco_cs_release */
372 static int orinoco_cs_suspend(struct pcmcia_device
*link
)
374 struct net_device
*dev
= link
->priv
;
375 struct orinoco_private
*priv
= netdev_priv(dev
);
376 struct orinoco_pccard
*card
= priv
->card
;
380 /* This is probably racy, but I can't think of
381 a better way, short of rewriting the PCMCIA
382 layer to not suck :-( */
383 if (! test_bit(0, &card
->hard_reset_in_progress
)) {
384 spin_lock_irqsave(&priv
->lock
, flags
);
386 err
= __orinoco_down(dev
);
388 printk(KERN_WARNING
"%s: Error %d downing interface\n",
391 netif_device_detach(dev
);
392 priv
->hw_unavailable
++;
394 spin_unlock_irqrestore(&priv
->lock
, flags
);
400 static int orinoco_cs_resume(struct pcmcia_device
*link
)
402 struct net_device
*dev
= link
->priv
;
403 struct orinoco_private
*priv
= netdev_priv(dev
);
404 struct orinoco_pccard
*card
= priv
->card
;
408 if (! test_bit(0, &card
->hard_reset_in_progress
)) {
409 err
= orinoco_reinit_firmware(dev
);
411 printk(KERN_ERR
"%s: Error %d re-initializing firmware\n",
416 spin_lock_irqsave(&priv
->lock
, flags
);
418 netif_device_attach(dev
);
419 priv
->hw_unavailable
--;
421 if (priv
->open
&& ! priv
->hw_unavailable
) {
422 err
= __orinoco_up(dev
);
424 printk(KERN_ERR
"%s: Error %d restarting card\n",
428 spin_unlock_irqrestore(&priv
->lock
, flags
);
435 /********************************************************************/
436 /* Module initialization */
437 /********************************************************************/
439 /* Can't be declared "const" or the whole __initdata section will
441 static char version
[] __initdata
= DRIVER_NAME
" " DRIVER_VERSION
442 " (David Gibson <hermes@gibson.dropbear.id.au>, "
443 "Pavel Roskin <proski@gnu.org>, et al)";
445 static struct pcmcia_device_id orinoco_cs_ids
[] = {
446 PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7100), /* SonicWALL Long Range Wireless Card */
447 PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300), /* Sohoware NCP110, Philips 802.11b */
448 PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0002), /* AnyPoint(TM) Wireless II PC Card */
449 PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777), /* 3Com AirConnect PCI 777A */
450 PCMCIA_DEVICE_MANF_CARD(0x0126, 0x8000), /* PROXIM RangeLAN-DS/LAN PC CARD */
451 PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002), /* Compaq WL100 11 Mbps Wireless Adapter */
452 PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0002), /* Lucent Orinoco and old Intersil */
453 PCMCIA_DEVICE_MANF_CARD(0x016b, 0x0001), /* Ericsson WLAN Card C11 */
454 PCMCIA_DEVICE_MANF_CARD(0x01eb, 0x080a), /* Nortel Networks eMobility 802.11 Wireless Adapter */
455 PCMCIA_DEVICE_MANF_CARD(0x01ff, 0x0008), /* Intermec MobileLAN 11Mbps 802.11b WLAN Card */
456 PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002), /* Samsung SWL2000-N 11Mb/s WLAN Card */
457 PCMCIA_DEVICE_MANF_CARD(0x0261, 0x0002), /* AirWay 802.11 Adapter (PCMCIA) */
458 PCMCIA_DEVICE_MANF_CARD(0x0268, 0x0001), /* ARtem Onair */
459 PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0305), /* Buffalo WLI-PCM-S11 */
460 PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612), /* Linksys WPC11 Version 2.5 */
461 PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1613), /* Linksys WPC11 Version 3 */
462 PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0002), /* Compaq HNW-100 11 Mbps Wireless Adapter */
463 PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0673), /* Linksys WCF12 Wireless CompactFlash Card */
464 PCMCIA_DEVICE_MANF_CARD(0x02aa, 0x0002), /* ASUS SpaceLink WL-100 */
465 PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x0002), /* SpeedStream SS1021 Wireless Adapter */
466 PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x3021), /* SpeedStream Wireless Adapter */
467 PCMCIA_DEVICE_MANF_CARD(0x14ea, 0xb001), /* PLANEX RoadLannerWave GW-NS11H */
468 PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x7300), /* Airvast WN-100 */
469 PCMCIA_DEVICE_MANF_CARD(0x9005, 0x0021), /* Adaptec Ultra Wireless ANW-8030 */
470 PCMCIA_DEVICE_MANF_CARD(0xc001, 0x0008), /* CONTEC FLEXSCAN/FX-DDS110-PCC */
471 PCMCIA_DEVICE_MANF_CARD(0xc250, 0x0002), /* Conceptronic CON11Cpro, EMTAC A2424i */
472 PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002), /* Safeway 802.11b, ZCOMAX AirRunner/XI-300 */
473 PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005), /* D-Link DCF660, Sandisk Connect SDWCFB-000 */
474 PCMCIA_DEVICE_PROD_ID12(" ", "IEEE 802.11 Wireless LAN/PC Card", 0x3b6e20c8, 0xefccafe9),
475 PCMCIA_DEVICE_PROD_ID12("3Com", "3CRWE737A AirConnect Wireless LAN PC Card", 0x41240e5b, 0x56010af3),
476 PCMCIA_DEVICE_PROD_ID12("ACTIONTEC", "PRISM Wireless LAN PC Card", 0x393089da, 0xa71e69d5),
477 PCMCIA_DEVICE_PROD_ID12("Addtron", "AWP-100 Wireless PCMCIA", 0xe6ec52ce, 0x08649af2),
478 PCMCIA_DEVICE_PROD_ID123("AIRVAST", "IEEE 802.11b Wireless PCMCIA Card", "HFA3863", 0xea569531, 0x4bcb9645, 0x355cb092),
479 PCMCIA_DEVICE_PROD_ID12("Allied Telesyn", "AT-WCL452 Wireless PCMCIA Radio", 0x5cd01705, 0x4271660f),
480 PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11b_PC_CARD_25", 0x78fc06ee, 0xdb9aa842),
481 PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11B_CF_CARD_25", 0x78fc06ee, 0x45a50c1e),
482 PCMCIA_DEVICE_PROD_ID12("Avaya Communication", "Avaya Wireless PC Card", 0xd8a43b78, 0x0d341169),
483 PCMCIA_DEVICE_PROD_ID12("BENQ", "AWL100 PCMCIA ADAPTER", 0x35dadc74, 0x01f7fedb),
484 PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-PCM-L11G", 0x2decece3, 0xf57ca4b3),
485 PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-CF-S11G", 0x2decece3, 0x82067c18),
486 PCMCIA_DEVICE_PROD_ID12("Cabletron", "RoamAbout 802.11 DS", 0x32d445f5, 0xedeffd90),
487 PCMCIA_DEVICE_PROD_ID12("Compaq", "WL200_11Mbps_Wireless_PCI_Card", 0x54f7c49c, 0x15a75e5b),
488 PCMCIA_DEVICE_PROD_ID123("corega", "WL PCCL-11", "ISL37300P", 0x0a21501a, 0x59868926, 0xc9049a39),
489 PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCC-11", 0x5261440f, 0xa6405584),
490 PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCCA-11", 0x5261440f, 0xdf6115f9),
491 PCMCIA_DEVICE_PROD_ID12("corega_K.K.", "Wireless_LAN_PCCB-11", 0x29e33311, 0xee7a27ae),
492 PCMCIA_DEVICE_PROD_ID12("D", "Link DRC-650 11Mbps WLAN Card", 0x71b18589, 0xf144e3ac),
493 PCMCIA_DEVICE_PROD_ID12("D", "Link DWL-650 11Mbps WLAN Card", 0x71b18589, 0xb6f1b0ab),
494 PCMCIA_DEVICE_PROD_ID12("D-Link Corporation", "D-Link DWL-650H 11Mbps WLAN Adapter", 0xef544d24, 0xcd8ea916),
495 PCMCIA_DEVICE_PROD_ID12("Digital Data Communications", "WPC-0100", 0xfdd73470, 0xe0b6f146),
496 PCMCIA_DEVICE_PROD_ID12("ELSA", "AirLancer MC-11", 0x4507a33a, 0xef54f0e3),
497 PCMCIA_DEVICE_PROD_ID12("HyperLink", "Wireless PC Card 11Mbps", 0x56cc3f1a, 0x0bcf220c),
498 PCMCIA_DEVICE_PROD_ID123("Instant Wireless ", " Network PC CARD", "Version 01.02", 0x11d901af, 0x6e9bd926, 0x4b74baa0),
499 PCMCIA_DEVICE_PROD_ID12("Intel", "PRO/Wireless 2011 LAN PC Card", 0x816cc815, 0x07f58077),
500 PCMCIA_DEVICE_PROD_ID12("INTERSIL", "HFA384x/IEEE", 0x74c5e40d, 0xdb472a18),
501 PCMCIA_DEVICE_PROD_ID12("INTERSIL", "I-GATE 11M PC Card / PC Card plus", 0x74c5e40d, 0x8304ff77),
502 PCMCIA_DEVICE_PROD_ID12("Intersil", "PRISM 2_5 PCMCIA ADAPTER", 0x4b801a17, 0x6345a0bf),
503 PCMCIA_DEVICE_PROD_ID123("Intersil", "PRISM Freedom PCMCIA Adapter", "ISL37100P", 0x4b801a17, 0xf222ec2d, 0x630d52b2),
504 PCMCIA_DEVICE_PROD_ID12("LeArtery", "SYNCBYAIR 11Mbps Wireless LAN PC Card", 0x7e3b326a, 0x49893e92),
505 PCMCIA_DEVICE_PROD_ID12("Linksys", "Wireless CompactFlash Card", 0x0733cc81, 0x0c52f395),
506 PCMCIA_DEVICE_PROD_ID12("Lucent Technologies", "WaveLAN/IEEE", 0x23eb9949, 0xc562e72a),
507 PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11", 0x481e0094, 0x7360e410),
508 PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11G", 0x481e0094, 0xf57ca4b3),
509 PCMCIA_DEVICE_PROD_ID12("Microsoft", "Wireless Notebook Adapter MN-520", 0x5961bf85, 0x6eec8c01),
510 PCMCIA_DEVICE_PROD_ID12("NCR", "WaveLAN/IEEE", 0x24358cd4, 0xc562e72a),
511 PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401 Wireless PC", "Card", 0xa37434e9, 0x9762e8f1),
512 PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401RA Wireless PC", "Card", 0x0306467f, 0x9762e8f1),
513 PCMCIA_DEVICE_PROD_ID12("Nortel Networks", "emobility 802.11 Wireless LAN PC Card", 0x2d617ea0, 0x88cd5767),
514 PCMCIA_DEVICE_PROD_ID12("OEM", "PRISM2 IEEE 802.11 PC-Card", 0xfea54c90, 0x48f2bdd6),
515 PCMCIA_DEVICE_PROD_ID12("OTC", "Wireless AirEZY 2411-PCC WLAN Card", 0x4ac44287, 0x235a6bed),
516 PCMCIA_DEVICE_PROD_ID123("PCMCIA", "11M WLAN Card v2.5", "ISL37300P", 0x281f1c5d, 0x6e440487, 0xc9049a39),
517 PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-CF110", 0x209f40ab, 0xd9715264),
518 PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-NS110", 0x209f40ab, 0x46263178),
519 PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PC CARD HARMONY 80211B", 0xc6536a5e, 0x090c3cd9),
520 PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PCI CARD HARMONY 80211B", 0xc6536a5e, 0x9f494e26),
521 PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "11Mbps WLAN Card", 0x43d74cb4, 0x579bd91b),
522 PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2532W-B EliteConnect Wireless Adapter", 0xc4f8b18b, 0x196bd757),
523 PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2632W", 0xc4f8b18b, 0x474a1f2a),
524 PCMCIA_DEVICE_PROD_ID12("Symbol Technologies", "LA4111 Spectrum24 Wireless LAN PC Card", 0x3f02b4d6, 0x3663cb0e),
525 PCMCIA_DEVICE_PROD_ID123("The Linksys Group, Inc.", "Instant Wireless Network PC Card", "ISL37300P", 0xa5f472c2, 0x590eb502, 0xc9049a39),
526 PCMCIA_DEVICE_PROD_ID12("ZoomAir 11Mbps High", "Rate wireless Networking", 0x273fe3db, 0x32a1eaee),
529 MODULE_DEVICE_TABLE(pcmcia
, orinoco_cs_ids
);
531 static struct pcmcia_driver orinoco_driver
= {
532 .owner
= THIS_MODULE
,
536 .probe
= orinoco_cs_probe
,
537 .remove
= orinoco_cs_detach
,
538 .id_table
= orinoco_cs_ids
,
539 .suspend
= orinoco_cs_suspend
,
540 .resume
= orinoco_cs_resume
,
544 init_orinoco_cs(void)
546 printk(KERN_DEBUG
"%s\n", version
);
548 return pcmcia_register_driver(&orinoco_driver
);
552 exit_orinoco_cs(void)
554 pcmcia_unregister_driver(&orinoco_driver
);
557 module_init(init_orinoco_cs
);
558 module_exit(exit_orinoco_cs
);