4 * (c) Copyright 2000 The Puffin Group Inc.
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
11 * by Helge Deller <deller@gmx.de>
14 #include <linux/errno.h>
15 #include <linux/init.h>
16 #include <linux/interrupt.h>
17 #include <linux/module.h>
18 #include <linux/types.h>
24 #define ASP_GSC_IRQ 3 /* hardcoded interrupt for GSC */
26 #define ASP_VER_OFFSET 0x20 /* offset of ASP version */
28 #define ASP_LED_ADDR 0xf0800020
30 #define VIPER_INT_WORD 0xFFFBF088 /* addr of viper interrupt word */
32 static struct gsc_asic asp
;
34 static void asp_choose_irq(struct parisc_device
*dev
, void *ctrl
)
38 switch (dev
->id
.sversion
) {
39 case 0x71: irq
= 9; break; /* SCSI */
40 case 0x72: irq
= 8; break; /* LAN */
41 case 0x73: irq
= 1; break; /* HIL */
42 case 0x74: irq
= 7; break; /* Centronics */
43 case 0x75: irq
= (dev
->hw_path
== 4) ? 5 : 6; break; /* RS232 */
44 case 0x76: irq
= 10; break; /* EISA BA */
45 case 0x77: irq
= 11; break; /* Graphics1 */
46 case 0x7a: irq
= 13; break; /* Audio (Bushmaster) */
47 case 0x7b: irq
= 13; break; /* Audio (Scorpio) */
48 case 0x7c: irq
= 3; break; /* FW SCSI */
49 case 0x7d: irq
= 4; break; /* FDDI */
50 case 0x7f: irq
= 13; break; /* Audio (Outfield) */
51 default: return; /* Unknown */
54 gsc_asic_assign_irq(ctrl
, irq
, &dev
->irq
);
56 switch (dev
->id
.sversion
) {
57 case 0x73: irq
= 2; break; /* i8042 High-priority */
58 case 0x76: irq
= 0; break; /* EISA BA */
59 default: return; /* Other */
62 gsc_asic_assign_irq(ctrl
, irq
, &dev
->aux_irq
);
65 /* There are two register ranges we're interested in. Interrupt /
66 * Status / LED are at 0xf080xxxx and Asp special registers are at
67 * 0xf082fxxx. PDC only tells us that Asp is at 0xf082f000, so for
68 * the purposes of interrupt handling, we have to tell other bits of
69 * the kernel to look at the other registers.
71 #define ASP_INTERRUPT_ADDR 0xf0800000
73 static int __init
asp_init_chip(struct parisc_device
*dev
)
75 struct gsc_irq gsc_irq
;
78 asp
.version
= gsc_readb(dev
->hpa
.start
+ ASP_VER_OFFSET
) & 0xf;
79 asp
.name
= (asp
.version
== 1) ? "Asp" : "Cutoff";
80 asp
.hpa
= ASP_INTERRUPT_ADDR
;
82 printk(KERN_INFO
"%s version %d at 0x%lx found.\n",
83 asp
.name
, asp
.version
, (unsigned long)dev
->hpa
.start
);
85 /* the IRQ ASP should use */
87 dev
->irq
= gsc_claim_irq(&gsc_irq
, ASP_GSC_IRQ
);
89 printk(KERN_ERR
"%s(): cannot get GSC irq\n", __func__
);
93 asp
.eim
= ((u32
) gsc_irq
.txn_addr
) | gsc_irq
.txn_data
;
95 ret
= request_irq(gsc_irq
.irq
, gsc_asic_intr
, 0, "asp", &asp
);
99 /* Program VIPER to interrupt on the ASP irq */
100 gsc_writel((1 << (31 - ASP_GSC_IRQ
)),VIPER_INT_WORD
);
102 /* Done init'ing, register this driver */
103 ret
= gsc_common_setup(dev
, &asp
);
107 gsc_fixup_irqs(dev
, &asp
, asp_choose_irq
);
108 /* Mongoose is a sibling of Asp, not a child... */
109 gsc_fixup_irqs(parisc_parent(dev
), &asp
, asp_choose_irq
);
111 /* initialize the chassis LEDs */
112 #ifdef CONFIG_CHASSIS_LCD_LED
113 register_led_driver(DISPLAY_MODEL_OLD_ASP
, LED_CMD_REG_NONE
,
121 static struct parisc_device_id asp_tbl
[] = {
122 { HPHW_BA
, HVERSION_REV_ANY_ID
, HVERSION_ANY_ID
, 0x00070 },
126 struct parisc_driver asp_driver
= {
129 .probe
= asp_init_chip
,
This page took 0.032356 seconds and 5 git commands to generate.