drivers/phy/Kconfig

   1 #
   2 # PHY
   3 #
   4
   5 menu "PHY Subsystem"
   6
   7 config GENERIC_PHY
   8         bool "PHY Core"
   9         help
  10           Generic PHY support.
  11
  12           This framework is designed to provide a generic interface for PHY
  13           devices present in the kernel. This layer will have the generic
  14           API by which phy drivers can create PHY using the phy framework and
  15           phy users can obtain reference to the PHY. All the users of this
  16           framework should select this config.
  17
  18 config PHY_BCM_NS_USB2
  19         tristate "Broadcom Northstar USB 2.0 PHY Driver"
  20         depends on ARCH_BCM_IPROC || COMPILE_TEST
  21         depends on HAS_IOMEM && OF
  22         select GENERIC_PHY
  23         help
  24           Enable this to support Broadcom USB 2.0 PHY connected to the USB
  25           controller on Northstar family.
  26
  27 config PHY_BERLIN_USB
  28         tristate "Marvell Berlin USB PHY Driver"
  29         depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF
  30         select GENERIC_PHY
  31         help
  32           Enable this to support the USB PHY on Marvell Berlin SoCs.
  33
  34 config PHY_BERLIN_SATA
  35         tristate "Marvell Berlin SATA PHY driver"
  36         depends on ARCH_BERLIN && HAS_IOMEM && OF
  37         select GENERIC_PHY
  38         help
  39           Enable this to support the SATA PHY on Marvell Berlin SoCs.
  40
  41 config ARMADA375_USBCLUSTER_PHY
  42         def_bool y
  43         depends on MACH_ARMADA_375 || COMPILE_TEST
  44         depends on OF && HAS_IOMEM
  45         select GENERIC_PHY
  46
  47 config PHY_DA8XX_USB
  48         tristate "TI DA8xx USB PHY Driver"
  49         depends on ARCH_DAVINCI_DA8XX
  50         select GENERIC_PHY
  51         select MFD_SYSCON
  52         help
  53           Enable this to support the USB PHY on DA8xx SoCs.
  54
  55           This driver controls both the USB 1.1 PHY and the USB 2.0 PHY.
  56
  57 config PHY_DM816X_USB
  58         tristate "TI dm816x USB PHY driver"
  59         depends on ARCH_OMAP2PLUS
  60         depends on USB_SUPPORT
  61         select GENERIC_PHY
  62         select USB_PHY
  63         help
  64           Enable this for dm816x USB to work.
  65
  66 config PHY_EXYNOS_MIPI_VIDEO
  67         tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver"
  68         depends on HAS_IOMEM
  69         depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
  70         select GENERIC_PHY
  71         default y if ARCH_S5PV210 || ARCH_EXYNOS
  72         help
  73           Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P
  74           and EXYNOS SoCs.
  75
  76 config PHY_LPC18XX_USB_OTG
  77         tristate "NXP LPC18xx/43xx SoC USB OTG PHY driver"
  78         depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
  79         depends on MFD_SYSCON
  80         select GENERIC_PHY
  81         help
  82           Enable this to support NXP LPC18xx/43xx internal USB OTG PHY.
  83
  84           This driver is need for USB0 support on LPC18xx/43xx and takes
  85           care of enabling and clock setup.
  86
  87 config PHY_PXA_28NM_HSIC
  88         tristate "Marvell USB HSIC 28nm PHY Driver"
  89         depends on HAS_IOMEM
  90         select GENERIC_PHY
  91         help
  92           Enable this to support Marvell USB HSIC PHY driver for Marvell
  93           SoC. This driver will do the PHY initialization and shutdown.
  94           The PHY driver will be used by Marvell ehci driver.
  95
  96           To compile this driver as a module, choose M here.
  97
  98 config PHY_PXA_28NM_USB2
  99         tristate "Marvell USB 2.0 28nm PHY Driver"
 100         depends on HAS_IOMEM
 101         select GENERIC_PHY
 102         help
 103           Enable this to support Marvell USB 2.0 PHY driver for Marvell
 104           SoC. This driver will do the PHY initialization and shutdown.
 105           The PHY driver will be used by Marvell udc/ehci/otg driver.
 106
 107           To compile this driver as a module, choose M here.
 108
 109 config PHY_MVEBU_SATA
 110         def_bool y
 111         depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD
 112         depends on OF
 113         select GENERIC_PHY
 114
 115 config PHY_MIPHY28LP
 116         tristate "STMicroelectronics MIPHY28LP PHY driver for STiH407"
 117         depends on ARCH_STI
 118         select GENERIC_PHY
 119         help
 120           Enable this to support the miphy transceiver (for SATA/PCIE/USB3)
 121           that is part of STMicroelectronics STiH407 SoC.
 122
 123 config PHY_MIPHY365X
 124         tristate "STMicroelectronics MIPHY365X PHY driver for STiH41x series"
 125         depends on ARCH_STI
 126         depends on HAS_IOMEM
 127         depends on OF
 128         select GENERIC_PHY
 129         help
 130           Enable this to support the miphy transceiver (for SATA/PCIE)
 131           that is part of STMicroelectronics STiH41x SoC series.
 132
 133 config PHY_RCAR_GEN2
 134         tristate "Renesas R-Car generation 2 USB PHY driver"
 135         depends on ARCH_RENESAS
 136         depends on GENERIC_PHY
 137         help
 138           Support for USB PHY found on Renesas R-Car generation 2 SoCs.
 139
 140 config PHY_RCAR_GEN3_USB2
 141         tristate "Renesas R-Car generation 3 USB 2.0 PHY driver"
 142         depends on ARCH_RENESAS
 143         depends on EXTCON
 144         select GENERIC_PHY
 145         help
 146           Support for USB 2.0 PHY found on Renesas R-Car generation 3 SoCs.
 147
 148 config OMAP_CONTROL_PHY
 149         tristate "OMAP CONTROL PHY Driver"
 150         depends on ARCH_OMAP2PLUS || COMPILE_TEST
 151         help
 152           Enable this to add support for the PHY part present in the control
 153           module. This driver has API to power on the USB2 PHY and to write to
 154           the mailbox. The mailbox is present only in omap4 and the register to
 155           power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
 156           additional register to power on USB3 PHY/SATA PHY/PCIE PHY
 157           (PIPE3 PHY).
 158
 159 config OMAP_USB2
 160         tristate "OMAP USB2 PHY Driver"
 161         depends on ARCH_OMAP2PLUS
 162         depends on USB_SUPPORT
 163         select GENERIC_PHY
 164         select USB_PHY
 165         select OMAP_CONTROL_PHY
 166         depends on OMAP_OCP2SCP
 167         help
 168           Enable this to support the transceiver that is part of SOC. This
 169           driver takes care of all the PHY functionality apart from comparator.
 170           The USB OTG controller communicates with the comparator using this
 171           driver.
 172
 173 config TI_PIPE3
 174         tristate "TI PIPE3 PHY Driver"
 175         depends on ARCH_OMAP2PLUS || COMPILE_TEST
 176         select GENERIC_PHY
 177         select OMAP_CONTROL_PHY
 178         depends on OMAP_OCP2SCP
 179         help
 180           Enable this to support the PIPE3 PHY that is part of TI SOCs. This
 181           driver takes care of all the PHY functionality apart from comparator.
 182           This driver interacts with the "OMAP Control PHY Driver" to power
 183           on/off the PHY.
 184
 185 config TWL4030_USB
 186         tristate "TWL4030 USB Transceiver Driver"
 187         depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
 188         depends on USB_SUPPORT
 189         depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't 'y'
 190         select GENERIC_PHY
 191         select USB_PHY
 192         help
 193           Enable this to support the USB OTG transceiver on TWL4030
 194           family chips (including the TWL5030 and TPS659x0 devices).
 195           This transceiver supports high and full speed devices plus,
 196           in host mode, low speed.
 197
 198 config PHY_EXYNOS_DP_VIDEO
 199         tristate "EXYNOS SoC series Display Port PHY driver"
 200         depends on OF
 201         depends on ARCH_EXYNOS || COMPILE_TEST
 202         default ARCH_EXYNOS
 203         select GENERIC_PHY
 204         help
 205           Support for Display Port PHY found on Samsung EXYNOS SoCs.
 206
 207 config BCM_KONA_USB2_PHY
 208         tristate "Broadcom Kona USB2 PHY Driver"
 209         depends on HAS_IOMEM
 210         select GENERIC_PHY
 211         help
 212           Enable this to support the Broadcom Kona USB 2.0 PHY.
 213
 214 config PHY_EXYNOS5250_SATA
 215         tristate "Exynos5250 Sata SerDes/PHY driver"
 216         depends on SOC_EXYNOS5250
 217         depends on HAS_IOMEM
 218         depends on OF
 219         select GENERIC_PHY
 220         select I2C
 221         select I2C_S3C2410
 222         select MFD_SYSCON
 223         help
 224           Enable this to support SATA SerDes/Phy found on Samsung's
 225           Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s,
 226           SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host
 227           port to accept one SATA device.
 228
 229 config PHY_HIX5HD2_SATA
 230         tristate "HIX5HD2 SATA PHY Driver"
 231         depends on ARCH_HIX5HD2 && OF && HAS_IOMEM
 232         select GENERIC_PHY
 233         select MFD_SYSCON
 234         help
 235           Support for SATA PHY on Hisilicon hix5hd2 Soc.
 236
 237 config PHY_MT65XX_USB3
 238         tristate "Mediatek USB3.0 PHY Driver"
 239         depends on ARCH_MEDIATEK && OF
 240         select GENERIC_PHY
 241         help
 242           Say 'Y' here to add support for Mediatek USB3.0 PHY driver,
 243           it supports multiple usb2.0 and usb3.0 ports.
 244
 245 config PHY_HI6220_USB
 246         tristate "hi6220 USB PHY support"
 247         depends on (ARCH_HISI && ARM64) || COMPILE_TEST
 248         select GENERIC_PHY
 249         select MFD_SYSCON
 250         help
 251           Enable this to support the HISILICON HI6220 USB PHY.
 252
 253           To compile this driver as a module, choose M here.
 254
 255 config PHY_SUN4I_USB
 256         tristate "Allwinner sunxi SoC USB PHY driver"
 257         depends on ARCH_SUNXI && HAS_IOMEM && OF
 258         depends on RESET_CONTROLLER
 259         depends on EXTCON
 260         depends on POWER_SUPPLY
 261         select GENERIC_PHY
 262         help
 263           Enable this to support the transceiver that is part of Allwinner
 264           sunxi SoCs.
 265
 266           This driver controls the entire USB PHY block, both the USB OTG
 267           parts, as well as the 2 regular USB 2 host PHYs.
 268
 269 config PHY_SUN9I_USB
 270         tristate "Allwinner sun9i SoC USB PHY driver"
 271         depends on ARCH_SUNXI && HAS_IOMEM && OF
 272         depends on RESET_CONTROLLER
 273         depends on USB_SUPPORT
 274         select USB_COMMON
 275         select GENERIC_PHY
 276         help
 277           Enable this to support the transceiver that is part of Allwinner
 278           sun9i SoCs.
 279
 280           This driver controls each individual USB 2 host PHY.
 281
 282 config PHY_SAMSUNG_USB2
 283         tristate "Samsung USB 2.0 PHY driver"
 284         depends on HAS_IOMEM
 285         depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2
 286         select GENERIC_PHY
 287         select MFD_SYSCON
 288         default ARCH_EXYNOS
 289         help
 290           Enable this to support the Samsung USB 2.0 PHY driver for Samsung
 291           SoCs. This driver provides the interface for USB 2.0 PHY. Support
 292           for particular PHYs will be enabled based on the SoC type in addition
 293           to this driver.
 294
 295 config PHY_S5PV210_USB2
 296         bool "Support for S5PV210"
 297         depends on PHY_SAMSUNG_USB2
 298         depends on ARCH_S5PV210
 299         help
 300           Enable USB PHY support for S5PV210. This option requires that Samsung
 301           USB 2.0 PHY driver is enabled and means that support for this
 302           particular SoC is compiled in the driver. In case of S5PV210 two phys
 303           are available - device and host.
 304
 305 config PHY_EXYNOS4210_USB2
 306         bool
 307         depends on PHY_SAMSUNG_USB2
 308         default CPU_EXYNOS4210
 309
 310 config PHY_EXYNOS4X12_USB2
 311         bool
 312         depends on PHY_SAMSUNG_USB2
 313         default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412
 314
 315 config PHY_EXYNOS5250_USB2
 316         bool
 317         depends on PHY_SAMSUNG_USB2
 318         default SOC_EXYNOS5250 || SOC_EXYNOS5420
 319
 320 config PHY_EXYNOS5_USBDRD
 321         tristate "Exynos5 SoC series USB DRD PHY driver"
 322         depends on ARCH_EXYNOS && OF
 323         depends on HAS_IOMEM
 324         depends on USB_DWC3_EXYNOS
 325         select GENERIC_PHY
 326         select MFD_SYSCON
 327         default y
 328         help
 329           Enable USB DRD PHY support for Exynos 5 SoC series.
 330           This driver provides PHY interface for USB 3.0 DRD controller
 331           present on Exynos5 SoC series.
 332
 333 config PHY_PISTACHIO_USB
 334         tristate "IMG Pistachio USB2.0 PHY driver"
 335         depends on MACH_PISTACHIO
 336         select GENERIC_PHY
 337         help
 338           Enable this to support the USB2.0 PHY on the IMG Pistachio SoC.
 339
 340 config PHY_QCOM_APQ8064_SATA
 341         tristate "Qualcomm APQ8064 SATA SerDes/PHY driver"
 342         depends on ARCH_QCOM
 343         depends on HAS_IOMEM
 344         depends on OF
 345         select GENERIC_PHY
 346
 347 config PHY_QCOM_IPQ806X_SATA
 348         tristate "Qualcomm IPQ806x SATA SerDes/PHY driver"
 349         depends on ARCH_QCOM
 350         depends on HAS_IOMEM
 351         depends on OF
 352         select GENERIC_PHY
 353
 354 config PHY_ROCKCHIP_USB
 355         tristate "Rockchip USB2 PHY Driver"
 356         depends on ARCH_ROCKCHIP && OF
 357         select GENERIC_PHY
 358         help
 359           Enable this to support the Rockchip USB 2.0 PHY.
 360
 361 config PHY_ROCKCHIP_EMMC
 362         tristate "Rockchip EMMC PHY Driver"
 363         depends on ARCH_ROCKCHIP && OF
 364         select GENERIC_PHY
 365         help
 366           Enable this to support the Rockchip EMMC PHY.
 367
 368 config PHY_ROCKCHIP_DP
 369         tristate "Rockchip Display Port PHY Driver"
 370         depends on ARCH_ROCKCHIP && OF
 371         select GENERIC_PHY
 372         help
 373           Enable this to support the Rockchip Display Port PHY.
 374
 375 config PHY_ST_SPEAR1310_MIPHY
 376         tristate "ST SPEAR1310-MIPHY driver"
 377         select GENERIC_PHY
 378         depends on MACH_SPEAR1310 || COMPILE_TEST
 379         help
 380           Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA.
 381
 382 config PHY_ST_SPEAR1340_MIPHY
 383         tristate "ST SPEAR1340-MIPHY driver"
 384         select GENERIC_PHY
 385         depends on MACH_SPEAR1340 || COMPILE_TEST
 386         help
 387           Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA.
 388
 389 config PHY_XGENE
 390         tristate "APM X-Gene 15Gbps PHY support"
 391         depends on HAS_IOMEM && OF && (ARM64 || COMPILE_TEST)
 392         select GENERIC_PHY
 393         help
 394           This option enables support for APM X-Gene SoC multi-purpose PHY.
 395
 396 config PHY_STIH407_USB
 397         tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family"
 398         depends on RESET_CONTROLLER
 399         depends on ARCH_STI || COMPILE_TEST
 400         select GENERIC_PHY
 401         help
 402           Enable this support to enable the picoPHY device used by USB2
 403           and USB3 controllers on STMicroelectronics STiH407 SoC families.
 404
 405 config PHY_STIH41X_USB
 406         tristate "STMicroelectronics USB2 PHY driver for STiH41x series"
 407         depends on ARCH_STI
 408         select GENERIC_PHY
 409         help
 410           Enable this to support the USB transceiver that is part of
 411           STMicroelectronics STiH41x SoC series.
 412
 413 config PHY_QCOM_UFS
 414         tristate "Qualcomm UFS PHY driver"
 415         depends on OF && ARCH_QCOM
 416         select GENERIC_PHY
 417         help
 418           Support for UFS PHY on QCOM chipsets.
 419
 420 config PHY_TUSB1210
 421         tristate "TI TUSB1210 ULPI PHY module"
 422         depends on USB_ULPI_BUS
 423         select GENERIC_PHY
 424         help
 425           Support for TI TUSB1210 USB ULPI PHY.
 426
 427 config PHY_BRCM_SATA
 428         tristate "Broadcom SATA PHY driver"
 429         depends on ARCH_BRCMSTB || ARCH_BCM_IPROC || BMIPS_GENERIC || COMPILE_TEST
 430         depends on OF
 431         select GENERIC_PHY
 432         default ARCH_BCM_IPROC
 433         help
 434           Enable this to support the Broadcom SATA PHY.
 435           If unsure, say N.
 436
 437 config PHY_CYGNUS_PCIE
 438         tristate "Broadcom Cygnus PCIe PHY driver"
 439         depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST)
 440         select GENERIC_PHY
 441         default ARCH_BCM_CYGNUS
 442         help
 443           Enable this to support the Broadcom Cygnus PCIe PHY.
 444           If unsure, say N.
 445
 446 source "drivers/phy/tegra/Kconfig"
 447
 448 config PHY_NS2_PCIE
 449         tristate "Broadcom Northstar2 PCIe PHY driver"
 450         depends on OF && MDIO_BUS_MUX_BCM_IPROC
 451         select GENERIC_PHY
 452         default ARCH_BCM_IPROC
 453         help
 454           Enable this to support the Broadcom Northstar2 PCIe PHY.
 455           If unsure, say N.
 456 endmenu