drivers/phy/Kconfig

   1 #
   2 # PHY
   3 #
   4
   5 menu "PHY Subsystem"
   6
   7 config GENERIC_PHY
   8         bool "PHY Core"
   9         help
  10           Generic PHY support.
  11
  12           This framework is designed to provide a generic interface for PHY
  13           devices present in the kernel. This layer will have the generic
  14           API by which phy drivers can create PHY using the phy framework and
  15           phy users can obtain reference to the PHY. All the users of this
  16           framework should select this config.
  17
  18 config PHY_BERLIN_USB
  19         tristate "Marvell Berlin USB PHY Driver"
  20         depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF
  21         select GENERIC_PHY
  22         help
  23           Enable this to support the USB PHY on Marvell Berlin SoCs.
  24
  25 config PHY_BERLIN_SATA
  26         tristate "Marvell Berlin SATA PHY driver"
  27         depends on ARCH_BERLIN && HAS_IOMEM && OF
  28         select GENERIC_PHY
  29         help
  30           Enable this to support the SATA PHY on Marvell Berlin SoCs.
  31
  32 config PHY_EXYNOS_MIPI_VIDEO
  33         tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver"
  34         depends on HAS_IOMEM
  35         depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
  36         select GENERIC_PHY
  37         default y if ARCH_S5PV210 || ARCH_EXYNOS
  38         help
  39           Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P
  40           and EXYNOS SoCs.
  41
  42 config PHY_MVEBU_SATA
  43         def_bool y
  44         depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD
  45         depends on OF
  46         select GENERIC_PHY
  47
  48 config PHY_MIPHY28LP
  49         tristate "STMicroelectronics MIPHY28LP PHY driver for STiH407"
  50         depends on ARCH_STI
  51         select GENERIC_PHY
  52         help
  53           Enable this to support the miphy transceiver (for SATA/PCIE/USB3)
  54           that is part of STMicroelectronics STiH407 SoC.
  55
  56 config PHY_MIPHY365X
  57         tristate "STMicroelectronics MIPHY365X PHY driver for STiH41x series"
  58         depends on ARCH_STI
  59         depends on HAS_IOMEM
  60         depends on OF
  61         select GENERIC_PHY
  62         help
  63           Enable this to support the miphy transceiver (for SATA/PCIE)
  64           that is part of STMicroelectronics STiH41x SoC series.
  65
  66 config PHY_RCAR_GEN2
  67         tristate "Renesas R-Car generation 2 USB PHY driver"
  68         depends on ARCH_SHMOBILE
  69         depends on GENERIC_PHY
  70         help
  71           Support for USB PHY found on Renesas R-Car generation 2 SoCs.
  72
  73 config OMAP_CONTROL_PHY
  74         tristate "OMAP CONTROL PHY Driver"
  75         depends on ARCH_OMAP2PLUS || COMPILE_TEST
  76         help
  77           Enable this to add support for the PHY part present in the control
  78           module. This driver has API to power on the USB2 PHY and to write to
  79           the mailbox. The mailbox is present only in omap4 and the register to
  80           power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
  81           additional register to power on USB3 PHY/SATA PHY/PCIE PHY
  82           (PIPE3 PHY).
  83
  84 config OMAP_USB2
  85         tristate "OMAP USB2 PHY Driver"
  86         depends on ARCH_OMAP2PLUS
  87         depends on USB_PHY
  88         select GENERIC_PHY
  89         select OMAP_CONTROL_PHY
  90         depends on OMAP_OCP2SCP
  91         help
  92           Enable this to support the transceiver that is part of SOC. This
  93           driver takes care of all the PHY functionality apart from comparator.
  94           The USB OTG controller communicates with the comparator using this
  95           driver.
  96
  97 config TI_PIPE3
  98         tristate "TI PIPE3 PHY Driver"
  99         depends on ARCH_OMAP2PLUS || COMPILE_TEST
 100         select GENERIC_PHY
 101         select OMAP_CONTROL_PHY
 102         depends on OMAP_OCP2SCP
 103         help
 104           Enable this to support the PIPE3 PHY that is part of TI SOCs. This
 105           driver takes care of all the PHY functionality apart from comparator.
 106           This driver interacts with the "OMAP Control PHY Driver" to power
 107           on/off the PHY.
 108
 109 config TWL4030_USB
 110         tristate "TWL4030 USB Transceiver Driver"
 111         depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
 112         depends on USB_PHY
 113         select GENERIC_PHY
 114         help
 115           Enable this to support the USB OTG transceiver on TWL4030
 116           family chips (including the TWL5030 and TPS659x0 devices).
 117           This transceiver supports high and full speed devices plus,
 118           in host mode, low speed.
 119
 120 config PHY_EXYNOS_DP_VIDEO
 121         tristate "EXYNOS SoC series Display Port PHY driver"
 122         depends on OF
 123         depends on ARCH_EXYNOS || COMPILE_TEST
 124         default ARCH_EXYNOS
 125         select GENERIC_PHY
 126         help
 127           Support for Display Port PHY found on Samsung EXYNOS SoCs.
 128
 129 config BCM_KONA_USB2_PHY
 130         tristate "Broadcom Kona USB2 PHY Driver"
 131         depends on HAS_IOMEM
 132         select GENERIC_PHY
 133         help
 134           Enable this to support the Broadcom Kona USB 2.0 PHY.
 135
 136 config PHY_EXYNOS5250_SATA
 137         tristate "Exynos5250 Sata SerDes/PHY driver"
 138         depends on SOC_EXYNOS5250
 139         depends on HAS_IOMEM
 140         depends on OF
 141         select GENERIC_PHY
 142         select I2C
 143         select I2C_S3C2410
 144         select MFD_SYSCON
 145         help
 146           Enable this to support SATA SerDes/Phy found on Samsung's
 147           Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s,
 148           SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host
 149           port to accept one SATA device.
 150
 151 config PHY_HIX5HD2_SATA
 152         tristate "HIX5HD2 SATA PHY Driver"
 153         depends on ARCH_HIX5HD2 && OF && HAS_IOMEM
 154         select GENERIC_PHY
 155         select MFD_SYSCON
 156         help
 157           Support for SATA PHY on Hisilicon hix5hd2 Soc.
 158
 159 config PHY_SUN4I_USB
 160         tristate "Allwinner sunxi SoC USB PHY driver"
 161         depends on ARCH_SUNXI && HAS_IOMEM && OF
 162         depends on RESET_CONTROLLER
 163         select GENERIC_PHY
 164         help
 165           Enable this to support the transceiver that is part of Allwinner
 166           sunxi SoCs.
 167
 168           This driver controls the entire USB PHY block, both the USB OTG
 169           parts, as well as the 2 regular USB 2 host PHYs.
 170
 171 config PHY_SAMSUNG_USB2
 172         tristate "Samsung USB 2.0 PHY driver"
 173         depends on HAS_IOMEM
 174         depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2
 175         select GENERIC_PHY
 176         select MFD_SYSCON
 177         default ARCH_EXYNOS
 178         help
 179           Enable this to support the Samsung USB 2.0 PHY driver for Samsung
 180           SoCs. This driver provides the interface for USB 2.0 PHY. Support
 181           for particular PHYs will be enabled based on the SoC type in addition
 182           to this driver.
 183
 184 config PHY_S5PV210_USB2
 185         bool "Support for S5PV210"
 186         depends on PHY_SAMSUNG_USB2
 187         depends on ARCH_S5PV210
 188         help
 189           Enable USB PHY support for S5PV210. This option requires that Samsung
 190           USB 2.0 PHY driver is enabled and means that support for this
 191           particular SoC is compiled in the driver. In case of S5PV210 two phys
 192           are available - device and host.
 193
 194 config PHY_EXYNOS4210_USB2
 195         bool
 196         depends on PHY_SAMSUNG_USB2
 197         default CPU_EXYNOS4210
 198
 199 config PHY_EXYNOS4X12_USB2
 200         bool
 201         depends on PHY_SAMSUNG_USB2
 202         default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412
 203
 204 config PHY_EXYNOS5250_USB2
 205         bool
 206         depends on PHY_SAMSUNG_USB2
 207         default SOC_EXYNOS5250 || SOC_EXYNOS5420
 208
 209 config PHY_EXYNOS5_USBDRD
 210         tristate "Exynos5 SoC series USB DRD PHY driver"
 211         depends on ARCH_EXYNOS && OF
 212         depends on HAS_IOMEM
 213         depends on USB_DWC3_EXYNOS
 214         select GENERIC_PHY
 215         select MFD_SYSCON
 216         default y
 217         help
 218           Enable USB DRD PHY support for Exynos 5 SoC series.
 219           This driver provides PHY interface for USB 3.0 DRD controller
 220           present on Exynos5 SoC series.
 221
 222 config PHY_QCOM_APQ8064_SATA
 223         tristate "Qualcomm APQ8064 SATA SerDes/PHY driver"
 224         depends on ARCH_QCOM
 225         depends on HAS_IOMEM
 226         depends on OF
 227         select GENERIC_PHY
 228
 229 config PHY_QCOM_IPQ806X_SATA
 230         tristate "Qualcomm IPQ806x SATA SerDes/PHY driver"
 231         depends on ARCH_QCOM
 232         depends on HAS_IOMEM
 233         depends on OF
 234         select GENERIC_PHY
 235
 236 config PHY_ST_SPEAR1310_MIPHY
 237         tristate "ST SPEAR1310-MIPHY driver"
 238         select GENERIC_PHY
 239         depends on MACH_SPEAR1310 || COMPILE_TEST
 240         help
 241           Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA.
 242
 243 config PHY_ST_SPEAR1340_MIPHY
 244         tristate "ST SPEAR1340-MIPHY driver"
 245         select GENERIC_PHY
 246         depends on MACH_SPEAR1340 || COMPILE_TEST
 247         help
 248           Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA.
 249
 250 config PHY_XGENE
 251         tristate "APM X-Gene 15Gbps PHY support"
 252         depends on HAS_IOMEM && OF && (ARM64 || COMPILE_TEST)
 253         select GENERIC_PHY
 254         help
 255           This option enables support for APM X-Gene SoC multi-purpose PHY.
 256
 257 config PHY_STIH407_USB
 258         tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family"
 259         depends on RESET_CONTROLLER
 260         depends on ARCH_STI || COMPILE_TEST
 261         select GENERIC_PHY
 262         help
 263           Enable this support to enable the picoPHY device used by USB2
 264           and USB3 controllers on STMicroelectronics STiH407 SoC families.
 265
 266 config PHY_STIH41X_USB
 267         tristate "STMicroelectronics USB2 PHY driver for STiH41x series"
 268         depends on ARCH_STI
 269         select GENERIC_PHY
 270         help
 271           Enable this to support the USB transceiver that is part of
 272           STMicroelectronics STiH41x SoC series.
 273
 274 endmenu