drivers/pinctrl/Kconfig

   1 #
   2 # PINCTRL infrastructure and drivers
   3 #
   4
   5 config PINCTRL
   6         bool
   7
   8 if PINCTRL
   9
  10 menu "Pin controllers"
  11         depends on PINCTRL
  12
  13 config PINMUX
  14         bool "Support pin multiplexing controllers" if COMPILE_TEST
  15
  16 config PINCONF
  17         bool "Support pin configuration controllers" if COMPILE_TEST
  18
  19 config GENERIC_PINCONF
  20         bool
  21         select PINCONF
  22
  23 config DEBUG_PINCTRL
  24         bool "Debug PINCTRL calls"
  25         depends on DEBUG_KERNEL
  26         help
  27           Say Y here to add some extra checks and diagnostics to PINCTRL calls.
  28
  29 config PINCTRL_ADI2
  30         bool "ADI pin controller driver"
  31         depends on BLACKFIN
  32         select PINMUX
  33         select IRQ_DOMAIN
  34         help
  35           This is the pin controller and gpio driver for ADI BF54x, BF60x and
  36           future processors. This option is selected automatically when specific
  37           machine and arch are selected to build.
  38
  39 config PINCTRL_AS3722
  40         bool "Pinctrl and GPIO driver for ams AS3722 PMIC"
  41         depends on MFD_AS3722 && GPIOLIB
  42         select PINMUX
  43         select GENERIC_PINCONF
  44         help
  45           AS3722 device supports the configuration of GPIO pins for different
  46           functionality. This driver supports the pinmux, push-pull and
  47           open drain configuration for the GPIO pins of AS3722 devices. It also
  48           supports the GPIO functionality through gpiolib.
  49
  50 config PINCTRL_BF54x
  51         def_bool y if BF54x
  52         select PINCTRL_ADI2
  53
  54 config PINCTRL_BF60x
  55         def_bool y if BF60x
  56         select PINCTRL_ADI2
  57
  58 config PINCTRL_AT91
  59         bool "AT91 pinctrl driver"
  60         depends on OF
  61         depends on ARCH_AT91
  62         select PINMUX
  63         select PINCONF
  64         select GPIOLIB
  65         select OF_GPIO
  66         select GPIOLIB_IRQCHIP
  67         help
  68           Say Y here to enable the at91 pinctrl driver
  69
  70 config PINCTRL_AMD
  71         bool "AMD GPIO pin control"
  72         depends on GPIOLIB
  73         select GPIOLIB_IRQCHIP
  74         select PINCONF
  75         select GENERIC_PINCONF
  76         help
  77           driver for memory mapped GPIO functionality on AMD platforms
  78           (x86 or arm).Most pins are usually muxed to some other
  79           functionality by firmware,so only a small amount is available
  80           for gpio use.
  81
  82           Requires ACPI/FDT device enumeration code to set up a platform
  83           device.
  84
  85 config PINCTRL_LANTIQ
  86         bool
  87         depends on LANTIQ
  88         select PINMUX
  89         select PINCONF
  90
  91 config PINCTRL_LPC18XX
  92         bool "NXP LPC18XX/43XX SCU pinctrl driver"
  93         depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
  94         default ARCH_LPC18XX
  95         select PINMUX
  96         select GENERIC_PINCONF
  97         help
  98           Pinctrl driver for NXP LPC18xx/43xx System Control Unit (SCU).
  99
 100 config PINCTRL_FALCON
 101         bool
 102         depends on SOC_FALCON
 103         depends on PINCTRL_LANTIQ
 104
 105 config PINCTRL_MESON
 106         bool
 107         depends on OF
 108         select PINMUX
 109         select PINCONF
 110         select GENERIC_PINCONF
 111         select GPIOLIB
 112         select OF_GPIO
 113         select REGMAP_MMIO
 114
 115 config PINCTRL_ROCKCHIP
 116         bool
 117         select PINMUX
 118         select GENERIC_PINCONF
 119         select GENERIC_IRQ_CHIP
 120         select MFD_SYSCON
 121
 122 config PINCTRL_SINGLE
 123         tristate "One-register-per-pin type device tree based pinctrl driver"
 124         depends on OF
 125         select PINMUX
 126         select PINCONF
 127         select GENERIC_PINCONF
 128         help
 129           This selects the device tree based generic pinctrl driver.
 130
 131 config PINCTRL_SIRF
 132         bool "CSR SiRFprimaII pin controller driver"
 133         depends on ARCH_SIRF
 134         select PINMUX
 135         select PINCONF
 136         select GENERIC_PINCONF
 137         select GPIOLIB_IRQCHIP
 138
 139 config PINCTRL_PISTACHIO
 140         def_bool y if MACH_PISTACHIO
 141         depends on GPIOLIB
 142         select PINMUX
 143         select GENERIC_PINCONF
 144         select GPIOLIB_IRQCHIP
 145         select OF_GPIO
 146
 147 config PINCTRL_ST
 148         bool
 149         depends on OF
 150         select PINMUX
 151         select PINCONF
 152         select GPIOLIB_IRQCHIP
 153
 154 config PINCTRL_TEGRA
 155         bool
 156         select PINMUX
 157         select PINCONF
 158
 159 config PINCTRL_TEGRA20
 160         bool
 161         select PINCTRL_TEGRA
 162
 163 config PINCTRL_TEGRA30
 164         bool
 165         select PINCTRL_TEGRA
 166
 167 config PINCTRL_TEGRA114
 168         bool
 169         select PINCTRL_TEGRA
 170
 171 config PINCTRL_TEGRA124
 172         bool
 173         select PINCTRL_TEGRA
 174
 175 config PINCTRL_TEGRA210
 176         bool
 177         select PINCTRL_TEGRA
 178
 179 config PINCTRL_TEGRA_XUSB
 180         def_bool y if ARCH_TEGRA
 181         select GENERIC_PHY
 182         select PINCONF
 183         select PINMUX
 184
 185 config PINCTRL_TZ1090
 186         bool "Toumaz Xenif TZ1090 pin control driver"
 187         depends on SOC_TZ1090
 188         select PINMUX
 189         select GENERIC_PINCONF
 190
 191 config PINCTRL_TZ1090_PDC
 192         bool "Toumaz Xenif TZ1090 PDC pin control driver"
 193         depends on SOC_TZ1090
 194         select PINMUX
 195         select PINCONF
 196
 197 config PINCTRL_U300
 198         bool "U300 pin controller driver"
 199         depends on ARCH_U300
 200         select PINMUX
 201         select GENERIC_PINCONF
 202
 203 config PINCTRL_COH901
 204         bool "ST-Ericsson U300 COH 901 335/571 GPIO"
 205         depends on GPIOLIB && ARCH_U300 && PINCTRL_U300
 206         select GPIOLIB_IRQCHIP
 207         help
 208           Say yes here to support GPIO interface on ST-Ericsson U300.
 209           The names of the two IP block variants supported are
 210           COH 901 335 and COH 901 571/3. They contain 3, 5 or 7
 211           ports of 8 GPIO pins each.
 212
 213 config PINCTRL_PALMAS
 214         bool "Pinctrl driver for the PALMAS Series MFD devices"
 215         depends on OF && MFD_PALMAS
 216         select PINMUX
 217         select GENERIC_PINCONF
 218         help
 219           Palmas device supports the configuration of pins for different
 220           functionality. This driver supports the pinmux, push-pull and
 221           open drain configuration for the Palmas series devices like
 222           TPS65913, TPS80036 etc.
 223
 224 config PINCTRL_ZYNQ
 225         bool "Pinctrl driver for Xilinx Zynq"
 226         depends on ARCH_ZYNQ
 227         select PINMUX
 228         select GENERIC_PINCONF
 229         help
 230           This selectes the pinctrl driver for Xilinx Zynq.
 231
 232 source "drivers/pinctrl/bcm/Kconfig"
 233 source "drivers/pinctrl/berlin/Kconfig"
 234 source "drivers/pinctrl/freescale/Kconfig"
 235 source "drivers/pinctrl/intel/Kconfig"
 236 source "drivers/pinctrl/mvebu/Kconfig"
 237 source "drivers/pinctrl/nomadik/Kconfig"
 238 source "drivers/pinctrl/qcom/Kconfig"
 239 source "drivers/pinctrl/samsung/Kconfig"
 240 source "drivers/pinctrl/sh-pfc/Kconfig"
 241 source "drivers/pinctrl/spear/Kconfig"
 242 source "drivers/pinctrl/sunxi/Kconfig"
 243 source "drivers/pinctrl/vt8500/Kconfig"
 244 source "drivers/pinctrl/mediatek/Kconfig"
 245
 246 config PINCTRL_XWAY
 247         bool
 248         depends on SOC_TYPE_XWAY
 249         depends on PINCTRL_LANTIQ
 250
 251 config PINCTRL_TB10X
 252         bool
 253         depends on OF && ARC_PLAT_TB10X
 254         select GPIOLIB
 255
 256 endmenu
 257
 258 endif