drivers/pinctrl/Kconfig

   1 #
   2 # PINCTRL infrastructure and drivers
   3 #
   4
   5 config PINCTRL
   6         bool
   7
   8 menu "Pin controllers"
   9         depends on PINCTRL
  10
  11 config PINMUX
  12         bool "Support pin multiplexing controllers" if COMPILE_TEST
  13
  14 config PINCONF
  15         bool "Support pin configuration controllers" if COMPILE_TEST
  16
  17 config GENERIC_PINCONF
  18         bool
  19         select PINCONF
  20
  21 config DEBUG_PINCTRL
  22         bool "Debug PINCTRL calls"
  23         depends on DEBUG_KERNEL
  24         help
  25           Say Y here to add some extra checks and diagnostics to PINCTRL calls.
  26
  27 config PINCTRL_ADI2
  28         bool "ADI pin controller driver"
  29         depends on BLACKFIN
  30         select PINMUX
  31         select IRQ_DOMAIN
  32         help
  33           This is the pin controller and gpio driver for ADI BF54x, BF60x and
  34           future processors. This option is selected automatically when specific
  35           machine and arch are selected to build.
  36
  37 config PINCTRL_AS3722
  38         tristate "Pinctrl and GPIO driver for ams AS3722 PMIC"
  39         depends on MFD_AS3722 && GPIOLIB
  40         select PINMUX
  41         select GENERIC_PINCONF
  42         help
  43           AS3722 device supports the configuration of GPIO pins for different
  44           functionality. This driver supports the pinmux, push-pull and
  45           open drain configuration for the GPIO pins of AS3722 devices. It also
  46           supports the GPIO functionality through gpiolib.
  47
  48 config PINCTRL_BF54x
  49         def_bool y if BF54x
  50         select PINCTRL_ADI2
  51
  52 config PINCTRL_BF60x
  53         def_bool y if BF60x
  54         select PINCTRL_ADI2
  55
  56 config PINCTRL_AT91
  57         bool "AT91 pinctrl driver"
  58         depends on OF
  59         depends on ARCH_AT91
  60         select PINMUX
  61         select PINCONF
  62         select GPIOLIB
  63         select OF_GPIO
  64         select GPIOLIB_IRQCHIP
  65         help
  66           Say Y here to enable the at91 pinctrl driver
  67
  68 config PINCTRL_AT91PIO4
  69         bool "AT91 PIO4 pinctrl driver"
  70         depends on OF
  71         depends on ARCH_AT91
  72         select PINMUX
  73         select GENERIC_PINCONF
  74         select GPIOLIB
  75         select GPIOLIB_IRQCHIP
  76         select OF_GPIO
  77         help
  78           Say Y here to enable the at91 pinctrl/gpio driver for Atmel PIO4
  79           controller available on sama5d2 SoC.
  80
  81 config PINCTRL_AMD
  82         tristate "AMD GPIO pin control"
  83         depends on GPIOLIB
  84         select GPIOLIB_IRQCHIP
  85         select PINCONF
  86         select GENERIC_PINCONF
  87         help
  88           driver for memory mapped GPIO functionality on AMD platforms
  89           (x86 or arm).Most pins are usually muxed to some other
  90           functionality by firmware,so only a small amount is available
  91           for gpio use.
  92
  93           Requires ACPI/FDT device enumeration code to set up a platform
  94           device.
  95
  96 config PINCTRL_DIGICOLOR
  97         bool
  98         depends on OF && (ARCH_DIGICOLOR || COMPILE_TEST)
  99         select PINMUX
 100         select GENERIC_PINCONF
 101
 102 config PINCTRL_LANTIQ
 103         bool
 104         depends on LANTIQ
 105         select PINMUX
 106         select PINCONF
 107
 108 config PINCTRL_LPC18XX
 109         bool "NXP LPC18XX/43XX SCU pinctrl driver"
 110         depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
 111         default ARCH_LPC18XX
 112         select PINMUX
 113         select GENERIC_PINCONF
 114         help
 115           Pinctrl driver for NXP LPC18xx/43xx System Control Unit (SCU).
 116
 117 config PINCTRL_FALCON
 118         bool
 119         depends on SOC_FALCON
 120         depends on PINCTRL_LANTIQ
 121
 122 config PINCTRL_MESON
 123         bool
 124         depends on OF
 125         select PINMUX
 126         select PINCONF
 127         select GENERIC_PINCONF
 128         select GPIOLIB
 129         select OF_GPIO
 130         select REGMAP_MMIO
 131
 132 config PINCTRL_OXNAS
 133         bool
 134         depends on OF
 135         select PINMUX
 136         select PINCONF
 137         select GENERIC_PINCONF
 138         select GPIOLIB
 139         select OF_GPIO
 140         select GPIOLIB_IRQCHIP
 141         select MFD_SYSCON
 142
 143 config PINCTRL_ROCKCHIP
 144         bool
 145         select PINMUX
 146         select GENERIC_PINCONF
 147         select GENERIC_IRQ_CHIP
 148         select MFD_SYSCON
 149
 150 config PINCTRL_SINGLE
 151         tristate "One-register-per-pin type device tree based pinctrl driver"
 152         depends on OF
 153         select PINMUX
 154         select PINCONF
 155         select GENERIC_PINCONF
 156         help
 157           This selects the device tree based generic pinctrl driver.
 158
 159 config PINCTRL_SIRF
 160         bool "CSR SiRFprimaII pin controller driver"
 161         depends on ARCH_SIRF
 162         select PINMUX
 163         select PINCONF
 164         select GENERIC_PINCONF
 165         select GPIOLIB_IRQCHIP
 166
 167 config PINCTRL_PISTACHIO
 168         def_bool y if MACH_PISTACHIO
 169         depends on GPIOLIB
 170         select PINMUX
 171         select GENERIC_PINCONF
 172         select GPIOLIB_IRQCHIP
 173         select OF_GPIO
 174
 175 config PINCTRL_ST
 176         bool
 177         depends on OF
 178         select PINMUX
 179         select PINCONF
 180         select GPIOLIB_IRQCHIP
 181
 182 config PINCTRL_TZ1090
 183         bool "Toumaz Xenif TZ1090 pin control driver"
 184         depends on SOC_TZ1090
 185         select PINMUX
 186         select GENERIC_PINCONF
 187
 188 config PINCTRL_TZ1090_PDC
 189         bool "Toumaz Xenif TZ1090 PDC pin control driver"
 190         depends on SOC_TZ1090
 191         select PINMUX
 192         select PINCONF
 193
 194 config PINCTRL_U300
 195         bool "U300 pin controller driver"
 196         depends on ARCH_U300
 197         select PINMUX
 198         select GENERIC_PINCONF
 199
 200 config PINCTRL_COH901
 201         bool "ST-Ericsson U300 COH 901 335/571 GPIO"
 202         depends on GPIOLIB && ARCH_U300 && PINCTRL_U300
 203         select GPIOLIB_IRQCHIP
 204         help
 205           Say yes here to support GPIO interface on ST-Ericsson U300.
 206           The names of the two IP block variants supported are
 207           COH 901 335 and COH 901 571/3. They contain 3, 5 or 7
 208           ports of 8 GPIO pins each.
 209
 210 config PINCTRL_MAX77620
 211         tristate "MAX77620/MAX20024 Pincontrol support"
 212         depends on MFD_MAX77620
 213         select PINMUX
 214         select GENERIC_PINCONF
 215         help
 216           Say Yes here to enable Pin control support for Maxim PMIC MAX77620.
 217           This PMIC has 8 GPIO pins that work as GPIO as well as special
 218           function in alternate mode. This driver also configure push-pull,
 219           open drain, FPS slots etc.
 220
 221 config PINCTRL_PALMAS
 222         tristate "Pinctrl driver for the PALMAS Series MFD devices"
 223         depends on OF && MFD_PALMAS
 224         select PINMUX
 225         select GENERIC_PINCONF
 226         help
 227           Palmas device supports the configuration of pins for different
 228           functionality. This driver supports the pinmux, push-pull and
 229           open drain configuration for the Palmas series devices like
 230           TPS65913, TPS80036 etc.
 231
 232 config PINCTRL_PIC32
 233         bool "Microchip PIC32 pin controller driver"
 234         depends on OF
 235         depends on MACH_PIC32
 236         select PINMUX
 237         select GENERIC_PINCONF
 238         select GPIOLIB_IRQCHIP
 239         select OF_GPIO
 240         help
 241           This is the pin controller and gpio driver for Microchip PIC32
 242           microcontrollers. This option is selected automatically when specific
 243           machine and arch are selected to build.
 244
 245 config PINCTRL_PIC32MZDA
 246         def_bool y if PIC32MZDA
 247         select PINCTRL_PIC32
 248
 249 config PINCTRL_ZYNQ
 250         bool "Pinctrl driver for Xilinx Zynq"
 251         depends on ARCH_ZYNQ
 252         select PINMUX
 253         select GENERIC_PINCONF
 254         help
 255           This selects the pinctrl driver for Xilinx Zynq.
 256
 257 source "drivers/pinctrl/bcm/Kconfig"
 258 source "drivers/pinctrl/berlin/Kconfig"
 259 source "drivers/pinctrl/freescale/Kconfig"
 260 source "drivers/pinctrl/intel/Kconfig"
 261 source "drivers/pinctrl/mvebu/Kconfig"
 262 source "drivers/pinctrl/nomadik/Kconfig"
 263 source "drivers/pinctrl/pxa/Kconfig"
 264 source "drivers/pinctrl/qcom/Kconfig"
 265 source "drivers/pinctrl/samsung/Kconfig"
 266 source "drivers/pinctrl/sh-pfc/Kconfig"
 267 source "drivers/pinctrl/spear/Kconfig"
 268 source "drivers/pinctrl/stm32/Kconfig"
 269 source "drivers/pinctrl/sunxi/Kconfig"
 270 source "drivers/pinctrl/tegra/Kconfig"
 271 source "drivers/pinctrl/uniphier/Kconfig"
 272 source "drivers/pinctrl/vt8500/Kconfig"
 273 source "drivers/pinctrl/mediatek/Kconfig"
 274
 275 config PINCTRL_XWAY
 276         bool
 277         depends on SOC_TYPE_XWAY
 278         depends on PINCTRL_LANTIQ
 279
 280 config PINCTRL_TB10X
 281         bool
 282         depends on OF && ARC_PLAT_TB10X
 283         select GPIOLIB
 284
 285 endmenu