drivers/pinctrl/pinctrl-baytrail.c

   1 /*
   2  * Pinctrl GPIO driver for Intel Baytrail
   3  * Copyright (c) 2012-2013, Intel Corporation.
   4  *
   5  * Author: Mathias Nyman <mathias.nyman@linux.intel.com>
   6  *
   7  * This program is free software; you can redistribute it and/or modify it
   8  * under the terms and conditions of the GNU General Public License,
   9  * version 2, as published by the Free Software Foundation.
  10  *
  11  * This program is distributed in the hope it will be useful, but WITHOUT
  12  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  13  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  14  * more details.
  15  *
  16  * You should have received a copy of the GNU General Public License along with
  17  * this program; if not, write to the Free Software Foundation, Inc.,
  18  * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
  19  *
  20  */
  21
  22 #include <linux/kernel.h>
  23 #include <linux/module.h>
  24 #include <linux/init.h>
  25 #include <linux/types.h>
  26 #include <linux/bitops.h>
  27 #include <linux/interrupt.h>
  28 #include <linux/irq.h>
  29 #include <linux/gpio.h>
  30 #include <linux/irqdomain.h>
  31 #include <linux/acpi.h>
  32 #include <linux/acpi_gpio.h>
  33 #include <linux/platform_device.h>
  34 #include <linux/seq_file.h>
  35 #include <linux/io.h>
  36 #include <linux/pm_runtime.h>
  37 #include <linux/pinctrl/pinctrl.h>
  38
  39 /* memory mapped register offsets */
  40 #define BYT_CONF0_REG           0x000
  41 #define BYT_CONF1_REG           0x004
  42 #define BYT_VAL_REG             0x008
  43 #define BYT_DFT_REG             0x00c
  44 #define BYT_INT_STAT_REG        0x800
  45
  46 /* BYT_CONF0_REG register bits */
  47 #define BYT_TRIG_NEG            BIT(26)
  48 #define BYT_TRIG_POS            BIT(25)
  49 #define BYT_TRIG_LVL            BIT(24)
  50 #define BYT_PIN_MUX             0x07
  51
  52 /* BYT_VAL_REG register bits */
  53 #define BYT_INPUT_EN            BIT(2)  /* 0: input enabled (active low)*/
  54 #define BYT_OUTPUT_EN           BIT(1)  /* 0: output enabled (active low)*/
  55 #define BYT_LEVEL               BIT(0)
  56
  57 #define BYT_DIR_MASK            (BIT(1) | BIT(2))
  58 #define BYT_TRIG_MASK           (BIT(26) | BIT(25) | BIT(24))
  59
  60 #define BYT_NGPIO_SCORE         102
  61 #define BYT_NGPIO_NCORE         28
  62 #define BYT_NGPIO_SUS           44
  63
  64 /*
  65  * Baytrail gpio controller consist of three separate sub-controllers called
  66  * SCORE, NCORE and SUS. The sub-controllers are identified by their acpi UID.
  67  *
  68  * GPIO numbering is _not_ ordered meaning that gpio # 0 in ACPI namespace does
  69  * _not_ correspond to the first gpio register at controller's gpio base.
  70  * There is no logic or pattern in mapping gpio numbers to registers (pads) so
  71  * each sub-controller needs to have its own mapping table
  72  */
  73
  74 /* score_pins[gpio_nr] = pad_nr */
  75
  76 static unsigned const score_pins[BYT_NGPIO_SCORE] = {
  77         85, 89, 93, 96, 99, 102, 98, 101, 34, 37,
  78         36, 38, 39, 35, 40, 84, 62, 61, 64, 59,
  79         54, 56, 60, 55, 63, 57, 51, 50, 53, 47,
  80         52, 49, 48, 43, 46, 41, 45, 42, 58, 44,
  81         95, 105, 70, 68, 67, 66, 69, 71, 65, 72,
  82         86, 90, 88, 92, 103, 77, 79, 83, 78, 81,
  83         80, 82, 13, 12, 15, 14, 17, 18, 19, 16,
  84         2, 1, 0, 4, 6, 7, 9, 8, 33, 32,
  85         31, 30, 29, 27, 25, 28, 26, 23, 21, 20,
  86         24, 22, 5, 3, 10, 11, 106, 87, 91, 104,
  87         97, 100,
  88 };
  89
  90 static unsigned const ncore_pins[BYT_NGPIO_NCORE] = {
  91         19, 18, 17, 20, 21, 22, 24, 25, 23, 16,
  92         14, 15, 12, 26, 27, 1, 4, 8, 11, 0,
  93         3, 6, 10, 13, 2, 5, 9, 7,
  94 };
  95
  96 static unsigned const sus_pins[BYT_NGPIO_SUS] = {
  97         29, 33, 30, 31, 32, 34, 36, 35, 38, 37,
  98         18, 7, 11, 20, 17, 1, 8, 10, 19, 12,
  99         0, 2, 23, 39, 28, 27, 22, 21, 24, 25,
 100         26, 51, 56, 54, 49, 55, 48, 57, 50, 58,
 101         52, 53, 59, 40,
 102 };
 103
 104 static struct pinctrl_gpio_range byt_ranges[] = {
 105         {
 106                 .name = "1", /* match with acpi _UID in probe */
 107                 .npins = BYT_NGPIO_SCORE,
 108                 .pins = score_pins,
 109         },
 110         {
 111                 .name = "2",
 112                 .npins = BYT_NGPIO_NCORE,
 113                 .pins = ncore_pins,
 114         },
 115         {
 116                 .name = "3",
 117                 .npins = BYT_NGPIO_SUS,
 118                 .pins = sus_pins,
 119         },
 120         {
 121         },
 122 };
 123
 124 struct byt_gpio {
 125         struct gpio_chip                chip;
 126         struct irq_domain               *domain;
 127         struct platform_device          *pdev;
 128         spinlock_t                      lock;
 129         void __iomem                    *reg_base;
 130         struct pinctrl_gpio_range       *range;
 131 };
 132
 133 #define to_byt_gpio(c)  container_of(c, struct byt_gpio, chip)
 134
 135 static void __iomem *byt_gpio_reg(struct gpio_chip *chip, unsigned offset,
 136                                  int reg)
 137 {
 138         struct byt_gpio *vg = to_byt_gpio(chip);
 139         u32 reg_offset;
 140
 141         if (reg == BYT_INT_STAT_REG)
 142                 reg_offset = (offset / 32) * 4;
 143         else
 144                 reg_offset = vg->range->pins[offset] * 16;
 145
 146         return vg->reg_base + reg_offset + reg;
 147 }
 148
 149 static int byt_gpio_request(struct gpio_chip *chip, unsigned offset)
 150 {
 151         struct byt_gpio *vg = to_byt_gpio(chip);
 152
 153         pm_runtime_get(&vg->pdev->dev);
 154
 155         return 0;
 156 }
 157
 158 static void byt_gpio_free(struct gpio_chip *chip, unsigned offset)
 159 {
 160         struct byt_gpio *vg = to_byt_gpio(chip);
 161         void __iomem *reg = byt_gpio_reg(&vg->chip, offset, BYT_CONF0_REG);
 162         u32 value;
 163
 164         /* clear interrupt triggering */
 165         value = readl(reg);
 166         value &= ~(BYT_TRIG_POS | BYT_TRIG_NEG | BYT_TRIG_LVL);
 167         writel(value, reg);
 168
 169         pm_runtime_put(&vg->pdev->dev);
 170 }
 171
 172 static int byt_irq_type(struct irq_data *d, unsigned type)
 173 {
 174         struct byt_gpio *vg = irq_data_get_irq_chip_data(d);
 175         u32 offset = irqd_to_hwirq(d);
 176         u32 value;
 177         unsigned long flags;
 178         void __iomem *reg = byt_gpio_reg(&vg->chip, offset, BYT_CONF0_REG);
 179
 180         if (offset >= vg->chip.ngpio)
 181                 return -EINVAL;
 182
 183         spin_lock_irqsave(&vg->lock, flags);
 184         value = readl(reg);
 185
 186         /* For level trigges the BYT_TRIG_POS and BYT_TRIG_NEG bits
 187          * are used to indicate high and low level triggering
 188          */
 189         value &= ~(BYT_TRIG_POS | BYT_TRIG_NEG | BYT_TRIG_LVL);
 190
 191         switch (type) {
 192         case IRQ_TYPE_LEVEL_HIGH:
 193                 value |= BYT_TRIG_LVL;
 194         case IRQ_TYPE_EDGE_RISING:
 195                 value |= BYT_TRIG_POS;
 196                 break;
 197         case IRQ_TYPE_LEVEL_LOW:
 198                 value |= BYT_TRIG_LVL;
 199         case IRQ_TYPE_EDGE_FALLING:
 200                 value |= BYT_TRIG_NEG;
 201                 break;
 202         case IRQ_TYPE_EDGE_BOTH:
 203                 value |= (BYT_TRIG_NEG | BYT_TRIG_POS);
 204                 break;
 205         }
 206         writel(value, reg);
 207
 208         spin_unlock_irqrestore(&vg->lock, flags);
 209
 210         return 0;
 211 }
 212
 213 static int byt_gpio_get(struct gpio_chip *chip, unsigned offset)
 214 {
 215         void __iomem *reg = byt_gpio_reg(chip, offset, BYT_VAL_REG);
 216         return readl(reg) & BYT_LEVEL;
 217 }
 218
 219 static void byt_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 220 {
 221         struct byt_gpio *vg = to_byt_gpio(chip);
 222         void __iomem *reg = byt_gpio_reg(chip, offset, BYT_VAL_REG);
 223         unsigned long flags;
 224         u32 old_val;
 225
 226         spin_lock_irqsave(&vg->lock, flags);
 227
 228         old_val = readl(reg);
 229
 230         if (value)
 231                 writel(old_val | BYT_LEVEL, reg);
 232         else
 233                 writel(old_val & ~BYT_LEVEL, reg);
 234
 235         spin_unlock_irqrestore(&vg->lock, flags);
 236 }
 237
 238 static int byt_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
 239 {
 240         struct byt_gpio *vg = to_byt_gpio(chip);
 241         void __iomem *reg = byt_gpio_reg(chip, offset, BYT_VAL_REG);
 242         unsigned long flags;
 243         u32 value;
 244
 245         spin_lock_irqsave(&vg->lock, flags);
 246
 247         value = readl(reg) | BYT_DIR_MASK;
 248         value &= ~BYT_INPUT_EN;         /* active low */
 249         writel(value, reg);
 250
 251         spin_unlock_irqrestore(&vg->lock, flags);
 252
 253         return 0;
 254 }
 255
 256 static int byt_gpio_direction_output(struct gpio_chip *chip,
 257                                      unsigned gpio, int value)
 258 {
 259         struct byt_gpio *vg = to_byt_gpio(chip);
 260         void __iomem *reg = byt_gpio_reg(chip, gpio, BYT_VAL_REG);
 261         unsigned long flags;
 262         u32 reg_val;
 263
 264         spin_lock_irqsave(&vg->lock, flags);
 265
 266         reg_val = readl(reg) | BYT_DIR_MASK;
 267         reg_val &= ~BYT_OUTPUT_EN;
 268
 269         if (value)
 270                 writel(reg_val | BYT_LEVEL, reg);
 271         else
 272                 writel(reg_val & ~BYT_LEVEL, reg);
 273
 274         spin_unlock_irqrestore(&vg->lock, flags);
 275
 276         return 0;
 277 }
 278
 279 static void byt_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
 280 {
 281         struct byt_gpio *vg = to_byt_gpio(chip);
 282         int i;
 283         unsigned long flags;
 284         u32 conf0, val, offs;
 285
 286         spin_lock_irqsave(&vg->lock, flags);
 287
 288         for (i = 0; i < vg->chip.ngpio; i++) {
 289                 offs = vg->range->pins[i] * 16;
 290                 conf0 = readl(vg->reg_base + offs + BYT_CONF0_REG);
 291                 val = readl(vg->reg_base + offs + BYT_VAL_REG);
 292
 293                 seq_printf(s,
 294                            " gpio-%-3d %s %s %s pad-%-3d offset:0x%03x mux:%d %s%s%s\n",
 295                            i,
 296                            val & BYT_INPUT_EN ? "  " : "in",
 297                            val & BYT_OUTPUT_EN ? "   " : "out",
 298                            val & BYT_LEVEL ? "hi" : "lo",
 299                            vg->range->pins[i], offs,
 300                            conf0 & 0x7,
 301                            conf0 & BYT_TRIG_NEG ? " fall" : "",
 302                            conf0 & BYT_TRIG_POS ? " rise" : "",
 303                            conf0 & BYT_TRIG_LVL ? " level" : "");
 304         }
 305         spin_unlock_irqrestore(&vg->lock, flags);
 306 }
 307
 308 static int byt_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
 309 {
 310         struct byt_gpio *vg = to_byt_gpio(chip);
 311         return irq_create_mapping(vg->domain, offset);
 312 }
 313
 314 static void byt_gpio_irq_handler(unsigned irq, struct irq_desc *desc)
 315 {
 316         struct irq_data *data = irq_desc_get_irq_data(desc);
 317         struct byt_gpio *vg = irq_data_get_irq_handler_data(data);
 318         struct irq_chip *chip = irq_data_get_irq_chip(data);
 319         u32 base, pin, mask;
 320         void __iomem *reg;
 321         u32 pending;
 322         unsigned virq;
 323         int looplimit = 0;
 324
 325         /* check from GPIO controller which pin triggered the interrupt */
 326         for (base = 0; base < vg->chip.ngpio; base += 32) {
 327
 328                 reg = byt_gpio_reg(&vg->chip, base, BYT_INT_STAT_REG);
 329
 330                 while ((pending = readl(reg))) {
 331                         pin = __ffs(pending);
 332                         mask = BIT(pin);
 333                         /* Clear before handling so we can't lose an edge */
 334                         writel(mask, reg);
 335
 336                         virq = irq_find_mapping(vg->domain, base + pin);
 337                         generic_handle_irq(virq);
 338
 339                         /* In case bios or user sets triggering incorretly a pin
 340                          * might remain in "interrupt triggered" state.
 341                          */
 342                         if (looplimit++ > 32) {
 343                                 dev_err(&vg->pdev->dev,
 344                                         "Gpio %d interrupt flood, disabling\n",
 345                                         base + pin);
 346
 347                                 reg = byt_gpio_reg(&vg->chip, base + pin,
 348                                                    BYT_CONF0_REG);
 349                                 mask = readl(reg);
 350                                 mask &= ~(BYT_TRIG_NEG | BYT_TRIG_POS |
 351                                           BYT_TRIG_LVL);
 352                                 writel(mask, reg);
 353                                 mask = readl(reg); /* flush */
 354                                 break;
 355                         }
 356                 }
 357         }
 358         chip->irq_eoi(data);
 359 }
 360
 361 static void byt_irq_unmask(struct irq_data *d)
 362 {
 363 }
 364
 365 static void byt_irq_mask(struct irq_data *d)
 366 {
 367 }
 368
 369 static struct irq_chip byt_irqchip = {
 370         .name = "BYT-GPIO",
 371         .irq_mask = byt_irq_mask,
 372         .irq_unmask = byt_irq_unmask,
 373         .irq_set_type = byt_irq_type,
 374 };
 375
 376 static void byt_gpio_irq_init_hw(struct byt_gpio *vg)
 377 {
 378         void __iomem *reg;
 379         u32 base, value;
 380
 381         /* clear interrupt status trigger registers */
 382         for (base = 0; base < vg->chip.ngpio; base += 32) {
 383                 reg = byt_gpio_reg(&vg->chip, base, BYT_INT_STAT_REG);
 384                 writel(0xffffffff, reg);
 385                 /* make sure trigger bits are cleared, if not then a pin
 386                    might be misconfigured in bios */
 387                 value = readl(reg);
 388                 if (value)
 389                         dev_err(&vg->pdev->dev,
 390                                 "GPIO interrupt error, pins misconfigured\n");
 391         }
 392 }
 393
 394 static int byt_gpio_irq_map(struct irq_domain *d, unsigned int virq,
 395                             irq_hw_number_t hw)
 396 {
 397         struct byt_gpio *vg = d->host_data;
 398
 399         irq_set_chip_and_handler_name(virq, &byt_irqchip, handle_simple_irq,
 400                                       "demux");
 401         irq_set_chip_data(virq, vg);
 402         irq_set_irq_type(virq, IRQ_TYPE_NONE);
 403
 404         return 0;
 405 }
 406
 407 static const struct irq_domain_ops byt_gpio_irq_ops = {
 408         .map = byt_gpio_irq_map,
 409 };
 410
 411 static int byt_gpio_probe(struct platform_device *pdev)
 412 {
 413         struct byt_gpio *vg;
 414         struct gpio_chip *gc;
 415         struct resource *mem_rc, *irq_rc;
 416         struct device *dev = &pdev->dev;
 417         struct acpi_device *acpi_dev;
 418         struct pinctrl_gpio_range *range;
 419         acpi_handle handle = ACPI_HANDLE(dev);
 420         unsigned hwirq;
 421         int ret;
 422
 423         if (acpi_bus_get_device(handle, &acpi_dev))
 424                 return -ENODEV;
 425
 426         vg = devm_kzalloc(dev, sizeof(struct byt_gpio), GFP_KERNEL);
 427         if (!vg) {
 428                 dev_err(&pdev->dev, "can't allocate byt_gpio chip data\n");
 429                 return -ENOMEM;
 430         }
 431
 432         for (range = byt_ranges; range->name; range++) {
 433                 if (!strcmp(acpi_dev->pnp.unique_id, range->name)) {
 434                         vg->chip.ngpio = range->npins;
 435                         vg->range = range;
 436                         break;
 437                 }
 438         }
 439
 440         if (!vg->chip.ngpio || !vg->range)
 441                 return -ENODEV;
 442
 443         vg->pdev = pdev;
 444         platform_set_drvdata(pdev, vg);
 445
 446         mem_rc = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 447         vg->reg_base = devm_ioremap_resource(dev, mem_rc);
 448         if (IS_ERR(vg->reg_base))
 449                 return PTR_ERR(vg->reg_base);
 450
 451         spin_lock_init(&vg->lock);
 452
 453         gc = &vg->chip;
 454         gc->label = dev_name(&pdev->dev);
 455         gc->owner = THIS_MODULE;
 456         gc->request = byt_gpio_request;
 457         gc->free = byt_gpio_free;
 458         gc->direction_input = byt_gpio_direction_input;
 459         gc->direction_output = byt_gpio_direction_output;
 460         gc->get = byt_gpio_get;
 461         gc->set = byt_gpio_set;
 462         gc->dbg_show = byt_gpio_dbg_show;
 463         gc->base = -1;
 464         gc->can_sleep = 0;
 465         gc->dev = dev;
 466
 467         ret = gpiochip_add(gc);
 468         if (ret) {
 469                 dev_err(&pdev->dev, "failed adding byt-gpio chip\n");
 470                 return ret;
 471         }
 472
 473         /* set up interrupts  */
 474         irq_rc = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 475         if (irq_rc && irq_rc->start) {
 476                 hwirq = irq_rc->start;
 477                 gc->to_irq = byt_gpio_to_irq;
 478
 479                 vg->domain = irq_domain_add_linear(NULL, gc->ngpio,
 480                                                    &byt_gpio_irq_ops, vg);
 481                 if (!vg->domain)
 482                         return -ENXIO;
 483
 484                 byt_gpio_irq_init_hw(vg);
 485
 486                 irq_set_handler_data(hwirq, vg);
 487                 irq_set_chained_handler(hwirq, byt_gpio_irq_handler);
 488
 489                 /* Register interrupt handlers for gpio signaled acpi events */
 490                 acpi_gpiochip_request_interrupts(gc);
 491         }
 492
 493         pm_runtime_enable(dev);
 494
 495         return 0;
 496 }
 497
 498 static int byt_gpio_runtime_suspend(struct device *dev)
 499 {
 500         return 0;
 501 }
 502
 503 static int byt_gpio_runtime_resume(struct device *dev)
 504 {
 505         return 0;
 506 }
 507
 508 static const struct dev_pm_ops byt_gpio_pm_ops = {
 509         .runtime_suspend = byt_gpio_runtime_suspend,
 510         .runtime_resume = byt_gpio_runtime_resume,
 511 };
 512
 513 static const struct acpi_device_id byt_gpio_acpi_match[] = {
 514         { "INT33B2", 0 },
 515         { }
 516 };
 517 MODULE_DEVICE_TABLE(acpi, byt_gpio_acpi_match);
 518
 519 static int byt_gpio_remove(struct platform_device *pdev)
 520 {
 521         struct byt_gpio *vg = platform_get_drvdata(pdev);
 522         int err;
 523
 524         pm_runtime_disable(&pdev->dev);
 525         err = gpiochip_remove(&vg->chip);
 526         if (err)
 527                 dev_warn(&pdev->dev, "failed to remove gpio_chip.\n");
 528
 529         return 0;
 530 }
 531
 532 static struct platform_driver byt_gpio_driver = {
 533         .probe          = byt_gpio_probe,
 534         .remove         = byt_gpio_remove,
 535         .driver         = {
 536                 .name   = "byt_gpio",
 537                 .owner  = THIS_MODULE,
 538                 .pm     = &byt_gpio_pm_ops,
 539                 .acpi_match_table = ACPI_PTR(byt_gpio_acpi_match),
 540         },
 541 };
 542
 543 static int __init byt_gpio_init(void)
 544 {
 545         return platform_driver_register(&byt_gpio_driver);
 546 }
 547
 548 subsys_initcall(byt_gpio_init);