drivers/pinctrl/samsung/pinctrl-samsung.h

   1 /*
   2  * pin-controller/pin-mux/pin-config/gpio-driver for Samsung's SoC's.
   3  *
   4  * Copyright (c) 2012 Samsung Electronics Co., Ltd.
   5  *              http://www.samsung.com
   6  * Copyright (c) 2012 Linaro Ltd
   7  *              http://www.linaro.org
   8  *
   9  * Author: Thomas Abraham <thomas.ab@samsung.com>
  10  *
  11  * This program is free software; you can redistribute it and/or modify
  12  * it under the terms of the GNU General Public License as published by
  13  * the Free Software Foundation; either version 2 of the License, or
  14  * (at your option) any later version.
  15  */
  16
  17 #ifndef __PINCTRL_SAMSUNG_H
  18 #define __PINCTRL_SAMSUNG_H
  19
  20 #include <linux/pinctrl/pinctrl.h>
  21 #include <linux/pinctrl/pinmux.h>
  22 #include <linux/pinctrl/pinconf.h>
  23 #include <linux/pinctrl/consumer.h>
  24 #include <linux/pinctrl/machine.h>
  25
  26 #include <linux/gpio.h>
  27
  28 /* pinmux function number for pin as gpio output line */
  29 #define FUNC_INPUT      0x0
  30 #define FUNC_OUTPUT     0x1
  31
  32 /**
  33  * enum pincfg_type - possible pin configuration types supported.
  34  * @PINCFG_TYPE_FUNC: Function configuration.
  35  * @PINCFG_TYPE_DAT: Pin value configuration.
  36  * @PINCFG_TYPE_PUD: Pull up/down configuration.
  37  * @PINCFG_TYPE_DRV: Drive strength configuration.
  38  * @PINCFG_TYPE_CON_PDN: Pin function in power down mode.
  39  * @PINCFG_TYPE_PUD_PDN: Pull up/down configuration in power down mode.
  40  */
  41 enum pincfg_type {
  42         PINCFG_TYPE_FUNC,
  43         PINCFG_TYPE_DAT,
  44         PINCFG_TYPE_PUD,
  45         PINCFG_TYPE_DRV,
  46         PINCFG_TYPE_CON_PDN,
  47         PINCFG_TYPE_PUD_PDN,
  48
  49         PINCFG_TYPE_NUM
  50 };
  51
  52 /*
  53  * pin configuration (pull up/down and drive strength) type and its value are
  54  * packed together into a 16-bits. The upper 8-bits represent the configuration
  55  * type and the lower 8-bits hold the value of the configuration type.
  56  */
  57 #define PINCFG_TYPE_MASK                0xFF
  58 #define PINCFG_VALUE_SHIFT              8
  59 #define PINCFG_VALUE_MASK               (0xFF << PINCFG_VALUE_SHIFT)
  60 #define PINCFG_PACK(type, value)        (((value) << PINCFG_VALUE_SHIFT) | type)
  61 #define PINCFG_UNPACK_TYPE(cfg)         ((cfg) & PINCFG_TYPE_MASK)
  62 #define PINCFG_UNPACK_VALUE(cfg)        (((cfg) & PINCFG_VALUE_MASK) >> \
  63                                                 PINCFG_VALUE_SHIFT)
  64 /**
  65  * enum eint_type - possible external interrupt types.
  66  * @EINT_TYPE_NONE: bank does not support external interrupts
  67  * @EINT_TYPE_GPIO: bank supportes external gpio interrupts
  68  * @EINT_TYPE_WKUP: bank supportes external wakeup interrupts
  69  * @EINT_TYPE_WKUP_MUX: bank supports multiplexed external wakeup interrupts
  70  *
  71  * Samsung GPIO controller groups all the available pins into banks. The pins
  72  * in a pin bank can support external gpio interrupts or external wakeup
  73  * interrupts or no interrupts at all. From a software perspective, the only
  74  * difference between external gpio and external wakeup interrupts is that
  75  * the wakeup interrupts can additionally wakeup the system if it is in
  76  * suspended state.
  77  */
  78 enum eint_type {
  79         EINT_TYPE_NONE,
  80         EINT_TYPE_GPIO,
  81         EINT_TYPE_WKUP,
  82         EINT_TYPE_WKUP_MUX,
  83 };
  84
  85 /* maximum length of a pin in pin descriptor (example: "gpa0-0") */
  86 #define PIN_NAME_LENGTH 10
  87
  88 #define PIN_GROUP(n, p, f)                              \
  89         {                                               \
  90                 .name           = n,                    \
  91                 .pins           = p,                    \
  92                 .num_pins       = ARRAY_SIZE(p),        \
  93                 .func           = f                     \
  94         }
  95
  96 #define PMX_FUNC(n, g)                                  \
  97         {                                               \
  98                 .name           = n,                    \
  99                 .groups         = g,                    \
 100                 .num_groups     = ARRAY_SIZE(g),        \
 101         }
 102
 103 struct samsung_pinctrl_drv_data;
 104
 105 /**
 106  * struct samsung_pin_bank_type: pin bank type description
 107  * @fld_width: widths of configuration bitfields (0 if unavailable)
 108  * @reg_offset: offsets of configuration registers (don't care of width is 0)
 109  */
 110 struct samsung_pin_bank_type {
 111         u8 fld_width[PINCFG_TYPE_NUM];
 112         u8 reg_offset[PINCFG_TYPE_NUM];
 113 };
 114
 115 /**
 116  * struct samsung_pin_bank_data: represent a controller pin-bank (init data).
 117  * @type: type of the bank (register offsets and bitfield widths)
 118  * @pctl_offset: starting offset of the pin-bank registers.
 119  * @nr_pins: number of pins included in this bank.
 120  * @eint_func: function to set in CON register to configure pin as EINT.
 121  * @eint_type: type of the external interrupt supported by the bank.
 122  * @eint_mask: bit mask of pins which support EINT function.
 123  * @eint_offset: SoC-specific EINT register or interrupt offset of bank.
 124  * @name: name to be prefixed for each pin in this pin bank.
 125  */
 126 struct samsung_pin_bank_data {
 127         const struct samsung_pin_bank_type *type;
 128         u32             pctl_offset;
 129         u8              nr_pins;
 130         u8              eint_func;
 131         enum eint_type  eint_type;
 132         u32             eint_mask;
 133         u32             eint_offset;
 134         const char      *name;
 135 };
 136
 137 /**
 138  * struct samsung_pin_bank: represent a controller pin-bank.
 139  * @type: type of the bank (register offsets and bitfield widths)
 140  * @pctl_offset: starting offset of the pin-bank registers.
 141  * @nr_pins: number of pins included in this bank.
 142  * @eint_func: function to set in CON register to configure pin as EINT.
 143  * @eint_type: type of the external interrupt supported by the bank.
 144  * @eint_mask: bit mask of pins which support EINT function.
 145  * @eint_offset: SoC-specific EINT register or interrupt offset of bank.
 146  * @name: name to be prefixed for each pin in this pin bank.
 147  * @pin_base: starting pin number of the bank.
 148  * @soc_priv: per-bank private data for SoC-specific code.
 149  * @of_node: OF node of the bank.
 150  * @drvdata: link to controller driver data
 151  * @irq_domain: IRQ domain of the bank.
 152  * @gpio_chip: GPIO chip of the bank.
 153  * @grange: linux gpio pin range supported by this bank.
 154  * @irq_chip: link to irq chip for external gpio and wakeup interrupts.
 155  * @slock: spinlock protecting bank registers
 156  * @pm_save: saved register values during suspend
 157  */
 158 struct samsung_pin_bank {
 159         const struct samsung_pin_bank_type *type;
 160         u32             pctl_offset;
 161         u8              nr_pins;
 162         u8              eint_func;
 163         enum eint_type  eint_type;
 164         u32             eint_mask;
 165         u32             eint_offset;
 166         const char      *name;
 167
 168         u32             pin_base;
 169         void            *soc_priv;
 170         struct device_node *of_node;
 171         struct samsung_pinctrl_drv_data *drvdata;
 172         struct irq_domain *irq_domain;
 173         struct gpio_chip gpio_chip;
 174         struct pinctrl_gpio_range grange;
 175         struct exynos_irq_chip *irq_chip;
 176         spinlock_t slock;
 177
 178         u32 pm_save[PINCFG_TYPE_NUM + 1]; /* +1 to handle double CON registers*/
 179 };
 180
 181 /**
 182  * struct samsung_pin_ctrl: represent a pin controller.
 183  * @pin_banks: list of pin banks included in this controller.
 184  * @nr_banks: number of pin banks.
 185  * @eint_gpio_init: platform specific callback to setup the external gpio
 186  *      interrupts for the controller.
 187  * @eint_wkup_init: platform specific callback to setup the external wakeup
 188  *      interrupts for the controller.
 189  */
 190 struct samsung_pin_ctrl {
 191         const struct samsung_pin_bank_data *pin_banks;
 192         u32             nr_banks;
 193
 194         int             (*eint_gpio_init)(struct samsung_pinctrl_drv_data *);
 195         int             (*eint_wkup_init)(struct samsung_pinctrl_drv_data *);
 196         void            (*suspend)(struct samsung_pinctrl_drv_data *);
 197         void            (*resume)(struct samsung_pinctrl_drv_data *);
 198 };
 199
 200 /**
 201  * struct samsung_pinctrl_drv_data: wrapper for holding driver data together.
 202  * @node: global list node
 203  * @virt_base: register base address of the controller.
 204  * @dev: device instance representing the controller.
 205  * @irq: interrpt number used by the controller to notify gpio interrupts.
 206  * @ctrl: pin controller instance managed by the driver.
 207  * @pctl: pin controller descriptor registered with the pinctrl subsystem.
 208  * @pctl_dev: cookie representing pinctrl device instance.
 209  * @pin_groups: list of pin groups available to the driver.
 210  * @nr_groups: number of such pin groups.
 211  * @pmx_functions: list of pin functions available to the driver.
 212  * @nr_function: number of such pin functions.
 213  * @pin_base: starting system wide pin number.
 214  * @nr_pins: number of pins supported by the controller.
 215  */
 216 struct samsung_pinctrl_drv_data {
 217         struct list_head                node;
 218         void __iomem                    *virt_base;
 219         struct device                   *dev;
 220         int                             irq;
 221
 222         struct pinctrl_desc             pctl;
 223         struct pinctrl_dev              *pctl_dev;
 224
 225         const struct samsung_pin_group  *pin_groups;
 226         unsigned int                    nr_groups;
 227         const struct samsung_pmx_func   *pmx_functions;
 228         unsigned int                    nr_functions;
 229
 230         struct samsung_pin_bank         *pin_banks;
 231         u32                             nr_banks;
 232         unsigned int                    pin_base;
 233         unsigned int                    nr_pins;
 234
 235         void (*suspend)(struct samsung_pinctrl_drv_data *);
 236         void (*resume)(struct samsung_pinctrl_drv_data *);
 237 };
 238
 239 /**
 240  * struct samsung_pin_group: represent group of pins of a pinmux function.
 241  * @name: name of the pin group, used to lookup the group.
 242  * @pins: the pins included in this group.
 243  * @num_pins: number of pins included in this group.
 244  * @func: the function number to be programmed when selected.
 245  */
 246 struct samsung_pin_group {
 247         const char              *name;
 248         const unsigned int      *pins;
 249         u8                      num_pins;
 250         u8                      func;
 251 };
 252
 253 /**
 254  * struct samsung_pmx_func: represent a pin function.
 255  * @name: name of the pin function, used to lookup the function.
 256  * @groups: one or more names of pin groups that provide this function.
 257  * @num_groups: number of groups included in @groups.
 258  */
 259 struct samsung_pmx_func {
 260         const char              *name;
 261         const char              **groups;
 262         u8                      num_groups;
 263         u32                     val;
 264 };
 265
 266 /* list of all exported SoC specific data */
 267 extern const struct samsung_pin_ctrl exynos3250_pin_ctrl[];
 268 extern const struct samsung_pin_ctrl exynos4210_pin_ctrl[];
 269 extern const struct samsung_pin_ctrl exynos4x12_pin_ctrl[];
 270 extern const struct samsung_pin_ctrl exynos4415_pin_ctrl[];
 271 extern const struct samsung_pin_ctrl exynos5250_pin_ctrl[];
 272 extern const struct samsung_pin_ctrl exynos5260_pin_ctrl[];
 273 extern const struct samsung_pin_ctrl exynos5410_pin_ctrl[];
 274 extern const struct samsung_pin_ctrl exynos5420_pin_ctrl[];
 275 extern const struct samsung_pin_ctrl exynos5433_pin_ctrl[];
 276 extern const struct samsung_pin_ctrl exynos7_pin_ctrl[];
 277 extern const struct samsung_pin_ctrl s3c64xx_pin_ctrl[];
 278 extern const struct samsung_pin_ctrl s3c2412_pin_ctrl[];
 279 extern const struct samsung_pin_ctrl s3c2416_pin_ctrl[];
 280 extern const struct samsung_pin_ctrl s3c2440_pin_ctrl[];
 281 extern const struct samsung_pin_ctrl s3c2450_pin_ctrl[];
 282 extern const struct samsung_pin_ctrl s5pv210_pin_ctrl[];
 283
 284 #endif /* __PINCTRL_SAMSUNG_H */