projects / deliverable / linux.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
[deliverable/linux.git] / drivers / power / avs / smartreflex.c
1 /*
2 * OMAP SmartReflex Voltage Control
3 *
4 * Author: Thara Gopinath <thara@ti.com>
5 *
6 * Copyright (C) 2012 Texas Instruments, Inc.
7 * Thara Gopinath <thara@ti.com>
8 *
9 * Copyright (C) 2008 Nokia Corporation
10 * Kalle Jokiniemi
11 *
12 * Copyright (C) 2007 Texas Instruments, Inc.
13 * Lesly A M <x0080970@ti.com>
14 *
15 * This program is free software; you can redistribute it and/or modify
16 * it under the terms of the GNU General Public License version 2 as
17 * published by the Free Software Foundation.
18 */
19
20 #include <linux/module.h>
21 #include <linux/interrupt.h>
22 #include <linux/clk.h>
23 #include <linux/io.h>
24 #include <linux/debugfs.h>
25 #include <linux/delay.h>
26 #include <linux/slab.h>
27 #include <linux/pm_runtime.h>
28 #include <linux/power/smartreflex.h>
29
30 #define SMARTREFLEX_NAME_LEN 16
31 #define NVALUE_NAME_LEN 40
32 #define SR_DISABLE_TIMEOUT 200
33
34 /* sr_list contains all the instances of smartreflex module */
35 static LIST_HEAD(sr_list);
36
37 static struct omap_sr_class_data *sr_class;
38 static struct omap_sr_pmic_data *sr_pmic_data;
39 static struct dentry *sr_dbg_dir;
40
41 static inline void sr_write_reg(struct omap_sr *sr, unsigned offset, u32 value)
42 {
43 __raw_writel(value, (sr->base + offset));
44 }
45
46 static inline void sr_modify_reg(struct omap_sr *sr, unsigned offset, u32 mask,
47 u32 value)
48 {
49 u32 reg_val;
50
51 /*
52 * Smartreflex error config register is special as it contains
53 * certain status bits which if written a 1 into means a clear
54 * of those bits. So in order to make sure no accidental write of
55 * 1 happens to those status bits, do a clear of them in the read
56 * value. This mean this API doesn't rewrite values in these bits
57 * if they are currently set, but does allow the caller to write
58 * those bits.
59 */
60 if (sr->ip_type == SR_TYPE_V1 && offset == ERRCONFIG_V1)
61 mask |= ERRCONFIG_STATUS_V1_MASK;
62 else if (sr->ip_type == SR_TYPE_V2 && offset == ERRCONFIG_V2)
63 mask |= ERRCONFIG_VPBOUNDINTST_V2;
64
65 reg_val = __raw_readl(sr->base + offset);
66 reg_val &= ~mask;
67
68 value &= mask;
69
70 reg_val |= value;
71
72 __raw_writel(reg_val, (sr->base + offset));
73 }
74
75 static inline u32 sr_read_reg(struct omap_sr *sr, unsigned offset)
76 {
77 return __raw_readl(sr->base + offset);
78 }
79
80 static struct omap_sr *_sr_lookup(struct voltagedomain *voltdm)
81 {
82 struct omap_sr *sr_info;
83
84 if (!voltdm) {
85 pr_err("%s: Null voltage domain passed!\n", __func__);
86 return ERR_PTR(-EINVAL);
87 }
88
89 list_for_each_entry(sr_info, &sr_list, node) {
90 if (voltdm == sr_info->voltdm)
91 return sr_info;
92 }
93
94 return ERR_PTR(-ENODATA);
95 }
96
97 static irqreturn_t sr_interrupt(int irq, void *data)
98 {
99 struct omap_sr *sr_info = data;
100 u32 status = 0;
101
102 switch (sr_info->ip_type) {
103 case SR_TYPE_V1:
104 /* Read the status bits */
105 status = sr_read_reg(sr_info, ERRCONFIG_V1);
106
107 /* Clear them by writing back */
108 sr_write_reg(sr_info, ERRCONFIG_V1, status);
109 break;
110 case SR_TYPE_V2:
111 /* Read the status bits */
112 status = sr_read_reg(sr_info, IRQSTATUS);
113
114 /* Clear them by writing back */
115 sr_write_reg(sr_info, IRQSTATUS, status);
116 break;
117 default:
118 dev_err(&sr_info->pdev->dev, "UNKNOWN IP type %d\n",
119 sr_info->ip_type);
120 return IRQ_NONE;
121 }
122
123 if (sr_class->notify)
124 sr_class->notify(sr_info, status);
125
126 return IRQ_HANDLED;
127 }
128
129 static void sr_set_clk_length(struct omap_sr *sr)
130 {
131 struct clk *fck;
132 u32 fclk_speed;
133
134 fck = clk_get(&sr->pdev->dev, "fck");
135
136 if (IS_ERR(fck)) {
137 dev_err(&sr->pdev->dev, "%s: unable to get fck for device %s\n",
138 __func__, dev_name(&sr->pdev->dev));
139 return;
140 }
141
142 fclk_speed = clk_get_rate(fck);
143 clk_put(fck);
144
145 switch (fclk_speed) {
146 case 12000000:
147 sr->clk_length = SRCLKLENGTH_12MHZ_SYSCLK;
148 break;
149 case 13000000:
150 sr->clk_length = SRCLKLENGTH_13MHZ_SYSCLK;
151 break;
152 case 19200000:
153 sr->clk_length = SRCLKLENGTH_19MHZ_SYSCLK;
154 break;
155 case 26000000:
156 sr->clk_length = SRCLKLENGTH_26MHZ_SYSCLK;
157 break;
158 case 38400000:
159 sr->clk_length = SRCLKLENGTH_38MHZ_SYSCLK;
160 break;
161 default:
162 dev_err(&sr->pdev->dev, "%s: Invalid fclk rate: %d\n",
163 __func__, fclk_speed);
164 break;
165 }
166 }
167
168 static void sr_start_vddautocomp(struct omap_sr *sr)
169 {
170 if (!sr_class || !(sr_class->enable) || !(sr_class->configure)) {
171 dev_warn(&sr->pdev->dev,
172 "%s: smartreflex class driver not registered\n",
173 __func__);
174 return;
175 }
176
177 if (!sr_class->enable(sr))
178 sr->autocomp_active = true;
179 }
180
181 static void sr_stop_vddautocomp(struct omap_sr *sr)
182 {
183 if (!sr_class || !(sr_class->disable)) {
184 dev_warn(&sr->pdev->dev,
185 "%s: smartreflex class driver not registered\n",
186 __func__);
187 return;
188 }
189
190 if (sr->autocomp_active) {
191 sr_class->disable(sr, 1);
192 sr->autocomp_active = false;
193 }
194 }
195
196 /*
197 * This function handles the intializations which have to be done
198 * only when both sr device and class driver regiter has
199 * completed. This will be attempted to be called from both sr class
200 * driver register and sr device intializtion API's. Only one call
201 * will ultimately succeed.
202 *
203 * Currently this function registers interrupt handler for a particular SR
204 * if smartreflex class driver is already registered and has
205 * requested for interrupts and the SR interrupt line in present.
206 */
207 static int sr_late_init(struct omap_sr *sr_info)
208 {
209 struct omap_sr_data *pdata = sr_info->pdev->dev.platform_data;
210 struct resource *mem;
211 int ret = 0;
212
213 if (sr_class->notify && sr_class->notify_flags && sr_info->irq) {
214 ret = request_irq(sr_info->irq, sr_interrupt,
215 0, sr_info->name, sr_info);
216 if (ret)
217 goto error;
218 disable_irq(sr_info->irq);
219 }
220
221 if (pdata && pdata->enable_on_init)
222 sr_start_vddautocomp(sr_info);
223
224 return ret;
225
226 error:
227 iounmap(sr_info->base);
228 mem = platform_get_resource(sr_info->pdev, IORESOURCE_MEM, 0);
229 release_mem_region(mem->start, resource_size(mem));
230 list_del(&sr_info->node);
231 dev_err(&sr_info->pdev->dev, "%s: ERROR in registering"
232 "interrupt handler. Smartreflex will"
233 "not function as desired\n", __func__);
234 kfree(sr_info);
235
236 return ret;
237 }
238
239 static void sr_v1_disable(struct omap_sr *sr)
240 {
241 int timeout = 0;
242 int errconf_val = ERRCONFIG_MCUACCUMINTST | ERRCONFIG_MCUVALIDINTST |
243 ERRCONFIG_MCUBOUNDINTST;
244
245 /* Enable MCUDisableAcknowledge interrupt */
246 sr_modify_reg(sr, ERRCONFIG_V1,
247 ERRCONFIG_MCUDISACKINTEN, ERRCONFIG_MCUDISACKINTEN);
248
249 /* SRCONFIG - disable SR */
250 sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, 0x0);
251
252 /* Disable all other SR interrupts and clear the status as needed */
253 if (sr_read_reg(sr, ERRCONFIG_V1) & ERRCONFIG_VPBOUNDINTST_V1)
254 errconf_val |= ERRCONFIG_VPBOUNDINTST_V1;
255 sr_modify_reg(sr, ERRCONFIG_V1,
256 (ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUVALIDINTEN |
257 ERRCONFIG_MCUBOUNDINTEN | ERRCONFIG_VPBOUNDINTEN_V1),
258 errconf_val);
259
260 /*
261 * Wait for SR to be disabled.
262 * wait until ERRCONFIG.MCUDISACKINTST = 1. Typical latency is 1us.
263 */
264 sr_test_cond_timeout((sr_read_reg(sr, ERRCONFIG_V1) &
265 ERRCONFIG_MCUDISACKINTST), SR_DISABLE_TIMEOUT,
266 timeout);
267
268 if (timeout >= SR_DISABLE_TIMEOUT)
269 dev_warn(&sr->pdev->dev, "%s: Smartreflex disable timedout\n",
270 __func__);
271
272 /* Disable MCUDisableAcknowledge interrupt & clear pending interrupt */
273 sr_modify_reg(sr, ERRCONFIG_V1, ERRCONFIG_MCUDISACKINTEN,
274 ERRCONFIG_MCUDISACKINTST);
275 }
276
277 static void sr_v2_disable(struct omap_sr *sr)
278 {
279 int timeout = 0;
280
281 /* Enable MCUDisableAcknowledge interrupt */
282 sr_write_reg(sr, IRQENABLE_SET, IRQENABLE_MCUDISABLEACKINT);
283
284 /* SRCONFIG - disable SR */
285 sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, 0x0);
286
287 /*
288 * Disable all other SR interrupts and clear the status
289 * write to status register ONLY on need basis - only if status
290 * is set.
291 */
292 if (sr_read_reg(sr, ERRCONFIG_V2) & ERRCONFIG_VPBOUNDINTST_V2)
293 sr_modify_reg(sr, ERRCONFIG_V2, ERRCONFIG_VPBOUNDINTEN_V2,
294 ERRCONFIG_VPBOUNDINTST_V2);
295 else
296 sr_modify_reg(sr, ERRCONFIG_V2, ERRCONFIG_VPBOUNDINTEN_V2,
297 0x0);
298 sr_write_reg(sr, IRQENABLE_CLR, (IRQENABLE_MCUACCUMINT |
299 IRQENABLE_MCUVALIDINT |
300 IRQENABLE_MCUBOUNDSINT));
301 sr_write_reg(sr, IRQSTATUS, (IRQSTATUS_MCUACCUMINT |
302 IRQSTATUS_MCVALIDINT |
303 IRQSTATUS_MCBOUNDSINT));
304
305 /*
306 * Wait for SR to be disabled.
307 * wait until IRQSTATUS.MCUDISACKINTST = 1. Typical latency is 1us.
308 */
309 sr_test_cond_timeout((sr_read_reg(sr, IRQSTATUS) &
310 IRQSTATUS_MCUDISABLEACKINT), SR_DISABLE_TIMEOUT,
311 timeout);
312
313 if (timeout >= SR_DISABLE_TIMEOUT)
314 dev_warn(&sr->pdev->dev, "%s: Smartreflex disable timedout\n",
315 __func__);
316
317 /* Disable MCUDisableAcknowledge interrupt & clear pending interrupt */
318 sr_write_reg(sr, IRQENABLE_CLR, IRQENABLE_MCUDISABLEACKINT);
319 sr_write_reg(sr, IRQSTATUS, IRQSTATUS_MCUDISABLEACKINT);
320 }
321
322 static struct omap_sr_nvalue_table *sr_retrieve_nvalue_row(
323 struct omap_sr *sr, u32 efuse_offs)
324 {
325 int i;
326
327 if (!sr->nvalue_table) {
328 dev_warn(&sr->pdev->dev, "%s: Missing ntarget value table\n",
329 __func__);
330 return NULL;
331 }
332
333 for (i = 0; i < sr->nvalue_count; i++) {
334 if (sr->nvalue_table[i].efuse_offs == efuse_offs)
335 return &sr->nvalue_table[i];
336 }
337
338 return NULL;
339 }
340
341 /* Public Functions */
342
343 /**
344 * sr_configure_errgen() - Configures the smrtreflex to perform AVS using the
345 * error generator module.
346 * @voltdm: VDD pointer to which the SR module to be configured belongs to.
347 *
348 * This API is to be called from the smartreflex class driver to
349 * configure the error generator module inside the smartreflex module.
350 * SR settings if using the ERROR module inside Smartreflex.
351 * SR CLASS 3 by default uses only the ERROR module where as
352 * SR CLASS 2 can choose between ERROR module and MINMAXAVG
353 * module. Returns 0 on success and error value in case of failure.
354 */
355 int sr_configure_errgen(struct voltagedomain *voltdm)
356 {
357 u32 sr_config, sr_errconfig, errconfig_offs;
358 u32 vpboundint_en, vpboundint_st;
359 u32 senp_en = 0, senn_en = 0;
360 u8 senp_shift, senn_shift;
361 struct omap_sr *sr = _sr_lookup(voltdm);
362
363 if (IS_ERR(sr)) {
364 pr_warning("%s: omap_sr struct for voltdm not found\n", __func__);
365 return PTR_ERR(sr);
366 }
367
368 if (!sr->clk_length)
369 sr_set_clk_length(sr);
370
371 senp_en = sr->senp_mod;
372 senn_en = sr->senn_mod;
373
374 sr_config = (sr->clk_length << SRCONFIG_SRCLKLENGTH_SHIFT) |
375 SRCONFIG_SENENABLE | SRCONFIG_ERRGEN_EN;
376
377 switch (sr->ip_type) {
378 case SR_TYPE_V1:
379 sr_config |= SRCONFIG_DELAYCTRL;
380 senn_shift = SRCONFIG_SENNENABLE_V1_SHIFT;
381 senp_shift = SRCONFIG_SENPENABLE_V1_SHIFT;
382 errconfig_offs = ERRCONFIG_V1;
383 vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V1;
384 vpboundint_st = ERRCONFIG_VPBOUNDINTST_V1;
385 break;
386 case SR_TYPE_V2:
387 senn_shift = SRCONFIG_SENNENABLE_V2_SHIFT;
388 senp_shift = SRCONFIG_SENPENABLE_V2_SHIFT;
389 errconfig_offs = ERRCONFIG_V2;
390 vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V2;
391 vpboundint_st = ERRCONFIG_VPBOUNDINTST_V2;
392 break;
393 default:
394 dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex"
395 "module without specifying the ip\n", __func__);
396 return -EINVAL;
397 }
398
399 sr_config |= ((senn_en << senn_shift) | (senp_en << senp_shift));
400 sr_write_reg(sr, SRCONFIG, sr_config);
401 sr_errconfig = (sr->err_weight << ERRCONFIG_ERRWEIGHT_SHIFT) |
402 (sr->err_maxlimit << ERRCONFIG_ERRMAXLIMIT_SHIFT) |
403 (sr->err_minlimit << ERRCONFIG_ERRMINLIMIT_SHIFT);
404 sr_modify_reg(sr, errconfig_offs, (SR_ERRWEIGHT_MASK |
405 SR_ERRMAXLIMIT_MASK | SR_ERRMINLIMIT_MASK),
406 sr_errconfig);
407
408 /* Enabling the interrupts if the ERROR module is used */
409 sr_modify_reg(sr, errconfig_offs, (vpboundint_en | vpboundint_st),
410 vpboundint_en);
411
412 return 0;
413 }
414
415 /**
416 * sr_disable_errgen() - Disables SmartReflex AVS module's errgen component
417 * @voltdm: VDD pointer to which the SR module to be configured belongs to.
418 *
419 * This API is to be called from the smartreflex class driver to
420 * disable the error generator module inside the smartreflex module.
421 *
422 * Returns 0 on success and error value in case of failure.
423 */
424 int sr_disable_errgen(struct voltagedomain *voltdm)
425 {
426 u32 errconfig_offs;
427 u32 vpboundint_en, vpboundint_st;
428 struct omap_sr *sr = _sr_lookup(voltdm);
429
430 if (IS_ERR(sr)) {
431 pr_warning("%s: omap_sr struct for voltdm not found\n", __func__);
432 return PTR_ERR(sr);
433 }
434
435 switch (sr->ip_type) {
436 case SR_TYPE_V1:
437 errconfig_offs = ERRCONFIG_V1;
438 vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V1;
439 vpboundint_st = ERRCONFIG_VPBOUNDINTST_V1;
440 break;
441 case SR_TYPE_V2:
442 errconfig_offs = ERRCONFIG_V2;
443 vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V2;
444 vpboundint_st = ERRCONFIG_VPBOUNDINTST_V2;
445 break;
446 default:
447 dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex"
448 "module without specifying the ip\n", __func__);
449 return -EINVAL;
450 }
451
452 /* Disable the interrupts of ERROR module */
453 sr_modify_reg(sr, errconfig_offs, vpboundint_en | vpboundint_st, 0);
454
455 /* Disable the Sensor and errorgen */
456 sr_modify_reg(sr, SRCONFIG, SRCONFIG_SENENABLE | SRCONFIG_ERRGEN_EN, 0);
457
458 return 0;
459 }
460
461 /**
462 * sr_configure_minmax() - Configures the smrtreflex to perform AVS using the
463 * minmaxavg module.
464 * @voltdm: VDD pointer to which the SR module to be configured belongs to.
465 *
466 * This API is to be called from the smartreflex class driver to
467 * configure the minmaxavg module inside the smartreflex module.
468 * SR settings if using the ERROR module inside Smartreflex.
469 * SR CLASS 3 by default uses only the ERROR module where as
470 * SR CLASS 2 can choose between ERROR module and MINMAXAVG
471 * module. Returns 0 on success and error value in case of failure.
472 */
473 int sr_configure_minmax(struct voltagedomain *voltdm)
474 {
475 u32 sr_config, sr_avgwt;
476 u32 senp_en = 0, senn_en = 0;
477 u8 senp_shift, senn_shift;
478 struct omap_sr *sr = _sr_lookup(voltdm);
479
480 if (IS_ERR(sr)) {
481 pr_warning("%s: omap_sr struct for voltdm not found\n", __func__);
482 return PTR_ERR(sr);
483 }
484
485 if (!sr->clk_length)
486 sr_set_clk_length(sr);
487
488 senp_en = sr->senp_mod;
489 senn_en = sr->senn_mod;
490
491 sr_config = (sr->clk_length << SRCONFIG_SRCLKLENGTH_SHIFT) |
492 SRCONFIG_SENENABLE |
493 (sr->accum_data << SRCONFIG_ACCUMDATA_SHIFT);
494
495 switch (sr->ip_type) {
496 case SR_TYPE_V1:
497 sr_config |= SRCONFIG_DELAYCTRL;
498 senn_shift = SRCONFIG_SENNENABLE_V1_SHIFT;
499 senp_shift = SRCONFIG_SENPENABLE_V1_SHIFT;
500 break;
501 case SR_TYPE_V2:
502 senn_shift = SRCONFIG_SENNENABLE_V2_SHIFT;
503 senp_shift = SRCONFIG_SENPENABLE_V2_SHIFT;
504 break;
505 default:
506 dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex"
507 "module without specifying the ip\n", __func__);
508 return -EINVAL;
509 }
510
511 sr_config |= ((senn_en << senn_shift) | (senp_en << senp_shift));
512 sr_write_reg(sr, SRCONFIG, sr_config);
513 sr_avgwt = (sr->senp_avgweight << AVGWEIGHT_SENPAVGWEIGHT_SHIFT) |
514 (sr->senn_avgweight << AVGWEIGHT_SENNAVGWEIGHT_SHIFT);
515 sr_write_reg(sr, AVGWEIGHT, sr_avgwt);
516
517 /*
518 * Enabling the interrupts if MINMAXAVG module is used.
519 * TODO: check if all the interrupts are mandatory
520 */
521 switch (sr->ip_type) {
522 case SR_TYPE_V1:
523 sr_modify_reg(sr, ERRCONFIG_V1,
524 (ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUVALIDINTEN |
525 ERRCONFIG_MCUBOUNDINTEN),
526 (ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUACCUMINTST |
527 ERRCONFIG_MCUVALIDINTEN | ERRCONFIG_MCUVALIDINTST |
528 ERRCONFIG_MCUBOUNDINTEN | ERRCONFIG_MCUBOUNDINTST));
529 break;
530 case SR_TYPE_V2:
531 sr_write_reg(sr, IRQSTATUS,
532 IRQSTATUS_MCUACCUMINT | IRQSTATUS_MCVALIDINT |
533 IRQSTATUS_MCBOUNDSINT | IRQSTATUS_MCUDISABLEACKINT);
534 sr_write_reg(sr, IRQENABLE_SET,
535 IRQENABLE_MCUACCUMINT | IRQENABLE_MCUVALIDINT |
536 IRQENABLE_MCUBOUNDSINT | IRQENABLE_MCUDISABLEACKINT);
537 break;
538 default:
539 dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex"
540 "module without specifying the ip\n", __func__);
541 return -EINVAL;
542 }
543
544 return 0;
545 }
546
547 /**
548 * sr_enable() - Enables the smartreflex module.
549 * @voltdm: VDD pointer to which the SR module to be configured belongs to.
550 * @volt: The voltage at which the Voltage domain associated with
551 * the smartreflex module is operating at.
552 * This is required only to program the correct Ntarget value.
553 *
554 * This API is to be called from the smartreflex class driver to
555 * enable a smartreflex module. Returns 0 on success. Returns error
556 * value if the voltage passed is wrong or if ntarget value is wrong.
557 */
558 int sr_enable(struct voltagedomain *voltdm, unsigned long volt)
559 {
560 struct omap_volt_data *volt_data;
561 struct omap_sr *sr = _sr_lookup(voltdm);
562 struct omap_sr_nvalue_table *nvalue_row;
563 int ret;
564
565 if (IS_ERR(sr)) {
566 pr_warning("%s: omap_sr struct for voltdm not found\n", __func__);
567 return PTR_ERR(sr);
568 }
569
570 volt_data = omap_voltage_get_voltdata(sr->voltdm, volt);
571
572 if (IS_ERR(volt_data)) {
573 dev_warn(&sr->pdev->dev, "%s: Unable to get voltage table"
574 "for nominal voltage %ld\n", __func__, volt);
575 return PTR_ERR(volt_data);
576 }
577
578 nvalue_row = sr_retrieve_nvalue_row(sr, volt_data->sr_efuse_offs);
579
580 if (!nvalue_row) {
581 dev_warn(&sr->pdev->dev, "%s: failure getting SR data for this voltage %ld\n",
582 __func__, volt);
583 return -ENODATA;
584 }
585
586 /* errminlimit is opp dependent and hence linked to voltage */
587 sr->err_minlimit = nvalue_row->errminlimit;
588
589 pm_runtime_get_sync(&sr->pdev->dev);
590
591 /* Check if SR is already enabled. If yes do nothing */
592 if (sr_read_reg(sr, SRCONFIG) & SRCONFIG_SRENABLE)
593 return 0;
594
595 /* Configure SR */
596 ret = sr_class->configure(sr);
597 if (ret)
598 return ret;
599
600 sr_write_reg(sr, NVALUERECIPROCAL, nvalue_row->nvalue);
601
602 /* SRCONFIG - enable SR */
603 sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, SRCONFIG_SRENABLE);
604 return 0;
605 }
606
607 /**
608 * sr_disable() - Disables the smartreflex module.
609 * @voltdm: VDD pointer to which the SR module to be configured belongs to.
610 *
611 * This API is to be called from the smartreflex class driver to
612 * disable a smartreflex module.
613 */
614 void sr_disable(struct voltagedomain *voltdm)
615 {
616 struct omap_sr *sr = _sr_lookup(voltdm);
617
618 if (IS_ERR(sr)) {
619 pr_warning("%s: omap_sr struct for voltdm not found\n", __func__);
620 return;
621 }
622
623 /* Check if SR clocks are already disabled. If yes do nothing */
624 if (pm_runtime_suspended(&sr->pdev->dev))
625 return;
626
627 /*
628 * Disable SR if only it is indeed enabled. Else just
629 * disable the clocks.
630 */
631 if (sr_read_reg(sr, SRCONFIG) & SRCONFIG_SRENABLE) {
632 switch (sr->ip_type) {
633 case SR_TYPE_V1:
634 sr_v1_disable(sr);
635 break;
636 case SR_TYPE_V2:
637 sr_v2_disable(sr);
638 break;
639 default:
640 dev_err(&sr->pdev->dev, "UNKNOWN IP type %d\n",
641 sr->ip_type);
642 }
643 }
644
645 pm_runtime_put_sync_suspend(&sr->pdev->dev);
646 }
647
648 /**
649 * sr_register_class() - API to register a smartreflex class parameters.
650 * @class_data: The structure containing various sr class specific data.
651 *
652 * This API is to be called by the smartreflex class driver to register itself
653 * with the smartreflex driver during init. Returns 0 on success else the
654 * error value.
655 */
656 int sr_register_class(struct omap_sr_class_data *class_data)
657 {
658 struct omap_sr *sr_info;
659
660 if (!class_data) {
661 pr_warning("%s:, Smartreflex class data passed is NULL\n",
662 __func__);
663 return -EINVAL;
664 }
665
666 if (sr_class) {
667 pr_warning("%s: Smartreflex class driver already registered\n",
668 __func__);
669 return -EBUSY;
670 }
671
672 sr_class = class_data;
673
674 /*
675 * Call into late init to do intializations that require
676 * both sr driver and sr class driver to be initiallized.
677 */
678 list_for_each_entry(sr_info, &sr_list, node)
679 sr_late_init(sr_info);
680
681 return 0;
682 }
683
684 /**
685 * omap_sr_enable() - API to enable SR clocks and to call into the
686 * registered smartreflex class enable API.
687 * @voltdm: VDD pointer to which the SR module to be configured belongs to.
688 *
689 * This API is to be called from the kernel in order to enable
690 * a particular smartreflex module. This API will do the initial
691 * configurations to turn on the smartreflex module and in turn call
692 * into the registered smartreflex class enable API.
693 */
694 void omap_sr_enable(struct voltagedomain *voltdm)
695 {
696 struct omap_sr *sr = _sr_lookup(voltdm);
697
698 if (IS_ERR(sr)) {
699 pr_warning("%s: omap_sr struct for voltdm not found\n", __func__);
700 return;
701 }
702
703 if (!sr->autocomp_active)
704 return;
705
706 if (!sr_class || !(sr_class->enable) || !(sr_class->configure)) {
707 dev_warn(&sr->pdev->dev, "%s: smartreflex class driver not"
708 "registered\n", __func__);
709 return;
710 }
711
712 sr_class->enable(sr);
713 }
714
715 /**
716 * omap_sr_disable() - API to disable SR without resetting the voltage
717 * processor voltage
718 * @voltdm: VDD pointer to which the SR module to be configured belongs to.
719 *
720 * This API is to be called from the kernel in order to disable
721 * a particular smartreflex module. This API will in turn call
722 * into the registered smartreflex class disable API. This API will tell
723 * the smartreflex class disable not to reset the VP voltage after
724 * disabling smartreflex.
725 */
726 void omap_sr_disable(struct voltagedomain *voltdm)
727 {
728 struct omap_sr *sr = _sr_lookup(voltdm);
729
730 if (IS_ERR(sr)) {
731 pr_warning("%s: omap_sr struct for voltdm not found\n", __func__);
732 return;
733 }
734
735 if (!sr->autocomp_active)
736 return;
737
738 if (!sr_class || !(sr_class->disable)) {
739 dev_warn(&sr->pdev->dev, "%s: smartreflex class driver not"
740 "registered\n", __func__);
741 return;
742 }
743
744 sr_class->disable(sr, 0);
745 }
746
747 /**
748 * omap_sr_disable_reset_volt() - API to disable SR and reset the
749 * voltage processor voltage
750 * @voltdm: VDD pointer to which the SR module to be configured belongs to.
751 *
752 * This API is to be called from the kernel in order to disable
753 * a particular smartreflex module. This API will in turn call
754 * into the registered smartreflex class disable API. This API will tell
755 * the smartreflex class disable to reset the VP voltage after
756 * disabling smartreflex.
757 */
758 void omap_sr_disable_reset_volt(struct voltagedomain *voltdm)
759 {
760 struct omap_sr *sr = _sr_lookup(voltdm);
761
762 if (IS_ERR(sr)) {
763 pr_warning("%s: omap_sr struct for voltdm not found\n", __func__);
764 return;
765 }
766
767 if (!sr->autocomp_active)
768 return;
769
770 if (!sr_class || !(sr_class->disable)) {
771 dev_warn(&sr->pdev->dev, "%s: smartreflex class driver not"
772 "registered\n", __func__);
773 return;
774 }
775
776 sr_class->disable(sr, 1);
777 }
778
779 /**
780 * omap_sr_register_pmic() - API to register pmic specific info.
781 * @pmic_data: The structure containing pmic specific data.
782 *
783 * This API is to be called from the PMIC specific code to register with
784 * smartreflex driver pmic specific info. Currently the only info required
785 * is the smartreflex init on the PMIC side.
786 */
787 void omap_sr_register_pmic(struct omap_sr_pmic_data *pmic_data)
788 {
789 if (!pmic_data) {
790 pr_warning("%s: Trying to register NULL PMIC data structure"
791 "with smartreflex\n", __func__);
792 return;
793 }
794
795 sr_pmic_data = pmic_data;
796 }
797
798 /* PM Debug FS entries to enable and disable smartreflex. */
799 static int omap_sr_autocomp_show(void *data, u64 *val)
800 {
801 struct omap_sr *sr_info = data;
802
803 if (!sr_info) {
804 pr_warning("%s: omap_sr struct not found\n", __func__);
805 return -EINVAL;
806 }
807
808 *val = sr_info->autocomp_active;
809
810 return 0;
811 }
812
813 static int omap_sr_autocomp_store(void *data, u64 val)
814 {
815 struct omap_sr *sr_info = data;
816
817 if (!sr_info) {
818 pr_warning("%s: omap_sr struct not found\n", __func__);
819 return -EINVAL;
820 }
821
822 /* Sanity check */
823 if (val > 1) {
824 pr_warning("%s: Invalid argument %lld\n", __func__, val);
825 return -EINVAL;
826 }
827
828 /* control enable/disable only if there is a delta in value */
829 if (sr_info->autocomp_active != val) {
830 if (!val)
831 sr_stop_vddautocomp(sr_info);
832 else
833 sr_start_vddautocomp(sr_info);
834 }
835
836 return 0;
837 }
838
839 DEFINE_SIMPLE_ATTRIBUTE(pm_sr_fops, omap_sr_autocomp_show,
840 omap_sr_autocomp_store, "%llu\n");
841
842 static int __init omap_sr_probe(struct platform_device *pdev)
843 {
844 struct omap_sr *sr_info;
845 struct omap_sr_data *pdata = pdev->dev.platform_data;
846 struct resource *mem, *irq;
847 struct dentry *nvalue_dir;
848 int i, ret = 0;
849
850 sr_info = kzalloc(sizeof(struct omap_sr), GFP_KERNEL);
851 if (!sr_info) {
852 dev_err(&pdev->dev, "%s: unable to allocate sr_info\n",
853 __func__);
854 return -ENOMEM;
855 }
856
857 platform_set_drvdata(pdev, sr_info);
858
859 if (!pdata) {
860 dev_err(&pdev->dev, "%s: platform data missing\n", __func__);
861 ret = -EINVAL;
862 goto err_free_devinfo;
863 }
864
865 mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
866 if (!mem) {
867 dev_err(&pdev->dev, "%s: no mem resource\n", __func__);
868 ret = -ENODEV;
869 goto err_free_devinfo;
870 }
871
872 mem = request_mem_region(mem->start, resource_size(mem),
873 dev_name(&pdev->dev));
874 if (!mem) {
875 dev_err(&pdev->dev, "%s: no mem region\n", __func__);
876 ret = -EBUSY;
877 goto err_free_devinfo;
878 }
879
880 irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
881
882 pm_runtime_enable(&pdev->dev);
883 pm_runtime_irq_safe(&pdev->dev);
884
885 sr_info->name = kasprintf(GFP_KERNEL, "%s", pdata->name);
886 if (!sr_info->name) {
887 dev_err(&pdev->dev, "%s: Unable to alloc SR instance name\n",
888 __func__);
889 ret = -ENOMEM;
890 goto err_release_region;
891 }
892
893 sr_info->pdev = pdev;
894 sr_info->srid = pdev->id;
895 sr_info->voltdm = pdata->voltdm;
896 sr_info->nvalue_table = pdata->nvalue_table;
897 sr_info->nvalue_count = pdata->nvalue_count;
898 sr_info->senn_mod = pdata->senn_mod;
899 sr_info->senp_mod = pdata->senp_mod;
900 sr_info->err_weight = pdata->err_weight;
901 sr_info->err_maxlimit = pdata->err_maxlimit;
902 sr_info->accum_data = pdata->accum_data;
903 sr_info->senn_avgweight = pdata->senn_avgweight;
904 sr_info->senp_avgweight = pdata->senp_avgweight;
905 sr_info->autocomp_active = false;
906 sr_info->ip_type = pdata->ip_type;
907
908 sr_info->base = ioremap(mem->start, resource_size(mem));
909 if (!sr_info->base) {
910 dev_err(&pdev->dev, "%s: ioremap fail\n", __func__);
911 ret = -ENOMEM;
912 goto err_free_name;
913 }
914
915 if (irq)
916 sr_info->irq = irq->start;
917
918 sr_set_clk_length(sr_info);
919
920 list_add(&sr_info->node, &sr_list);
921
922 /*
923 * Call into late init to do intializations that require
924 * both sr driver and sr class driver to be initiallized.
925 */
926 if (sr_class) {
927 ret = sr_late_init(sr_info);
928 if (ret) {
929 pr_warning("%s: Error in SR late init\n", __func__);
930 goto err_iounmap;
931 }
932 }
933
934 dev_info(&pdev->dev, "%s: SmartReflex driver initialized\n", __func__);
935 if (!sr_dbg_dir) {
936 sr_dbg_dir = debugfs_create_dir("smartreflex", NULL);
937 if (IS_ERR_OR_NULL(sr_dbg_dir)) {
938 ret = PTR_ERR(sr_dbg_dir);
939 pr_err("%s:sr debugfs dir creation failed(%d)\n",
940 __func__, ret);
941 goto err_iounmap;
942 }
943 }
944
945 sr_info->dbg_dir = debugfs_create_dir(sr_info->name, sr_dbg_dir);
946 if (IS_ERR_OR_NULL(sr_info->dbg_dir)) {
947 dev_err(&pdev->dev, "%s: Unable to create debugfs directory\n",
948 __func__);
949 ret = PTR_ERR(sr_info->dbg_dir);
950 goto err_debugfs;
951 }
952
953 (void) debugfs_create_file("autocomp", S_IRUGO | S_IWUSR,
954 sr_info->dbg_dir, (void *)sr_info, &pm_sr_fops);
955 (void) debugfs_create_x32("errweight", S_IRUGO, sr_info->dbg_dir,
956 &sr_info->err_weight);
957 (void) debugfs_create_x32("errmaxlimit", S_IRUGO, sr_info->dbg_dir,
958 &sr_info->err_maxlimit);
959
960 nvalue_dir = debugfs_create_dir("nvalue", sr_info->dbg_dir);
961 if (IS_ERR_OR_NULL(nvalue_dir)) {
962 dev_err(&pdev->dev, "%s: Unable to create debugfs directory"
963 "for n-values\n", __func__);
964 ret = PTR_ERR(nvalue_dir);
965 goto err_debugfs;
966 }
967
968 if (sr_info->nvalue_count == 0 || !sr_info->nvalue_table) {
969 dev_warn(&pdev->dev, "%s: %s: No Voltage table for the corresponding vdd. Cannot create debugfs entries for n-values\n",
970 __func__, sr_info->name);
971
972 ret = -ENODATA;
973 goto err_debugfs;
974 }
975
976 for (i = 0; i < sr_info->nvalue_count; i++) {
977 char name[NVALUE_NAME_LEN + 1];
978
979 snprintf(name, sizeof(name), "volt_%lu",
980 sr_info->nvalue_table[i].volt_nominal);
981 (void) debugfs_create_x32(name, S_IRUGO | S_IWUSR, nvalue_dir,
982 &(sr_info->nvalue_table[i].nvalue));
983 snprintf(name, sizeof(name), "errminlimit_%lu",
984 sr_info->nvalue_table[i].volt_nominal);
985 (void) debugfs_create_x32(name, S_IRUGO | S_IWUSR, nvalue_dir,
986 &(sr_info->nvalue_table[i].errminlimit));
987
988 }
989
990 return ret;
991
992 err_debugfs:
993 debugfs_remove_recursive(sr_info->dbg_dir);
994 err_iounmap:
995 list_del(&sr_info->node);
996 iounmap(sr_info->base);
997 err_free_name:
998 kfree(sr_info->name);
999 err_release_region:
1000 release_mem_region(mem->start, resource_size(mem));
1001 err_free_devinfo:
1002 kfree(sr_info);
1003
1004 return ret;
1005 }
1006
1007 static int omap_sr_remove(struct platform_device *pdev)
1008 {
1009 struct omap_sr_data *pdata = pdev->dev.platform_data;
1010 struct omap_sr *sr_info;
1011 struct resource *mem;
1012
1013 if (!pdata) {
1014 dev_err(&pdev->dev, "%s: platform data missing\n", __func__);
1015 return -EINVAL;
1016 }
1017
1018 sr_info = _sr_lookup(pdata->voltdm);
1019 if (IS_ERR(sr_info)) {
1020 dev_warn(&pdev->dev, "%s: omap_sr struct not found\n",
1021 __func__);
1022 return PTR_ERR(sr_info);
1023 }
1024
1025 if (sr_info->autocomp_active)
1026 sr_stop_vddautocomp(sr_info);
1027 if (sr_info->dbg_dir)
1028 debugfs_remove_recursive(sr_info->dbg_dir);
1029
1030 list_del(&sr_info->node);
1031 iounmap(sr_info->base);
1032 kfree(sr_info->name);
1033 kfree(sr_info);
1034 mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1035 release_mem_region(mem->start, resource_size(mem));
1036
1037 return 0;
1038 }
1039
1040 static void omap_sr_shutdown(struct platform_device *pdev)
1041 {
1042 struct omap_sr_data *pdata = pdev->dev.platform_data;
1043 struct omap_sr *sr_info;
1044
1045 if (!pdata) {
1046 dev_err(&pdev->dev, "%s: platform data missing\n", __func__);
1047 return;
1048 }
1049
1050 sr_info = _sr_lookup(pdata->voltdm);
1051 if (IS_ERR(sr_info)) {
1052 dev_warn(&pdev->dev, "%s: omap_sr struct not found\n",
1053 __func__);
1054 return;
1055 }
1056
1057 if (sr_info->autocomp_active)
1058 sr_stop_vddautocomp(sr_info);
1059
1060 return;
1061 }
1062
1063 static struct platform_driver smartreflex_driver = {
1064 .remove = omap_sr_remove,
1065 .shutdown = omap_sr_shutdown,
1066 .driver = {
1067 .name = "smartreflex",
1068 },
1069 };
1070
1071 static int __init sr_init(void)
1072 {
1073 int ret = 0;
1074
1075 /*
1076 * sr_init is a late init. If by then a pmic specific API is not
1077 * registered either there is no need for anything to be done on
1078 * the PMIC side or somebody has forgotten to register a PMIC
1079 * handler. Warn for the second condition.
1080 */
1081 if (sr_pmic_data && sr_pmic_data->sr_pmic_init)
1082 sr_pmic_data->sr_pmic_init();
1083 else
1084 pr_warning("%s: No PMIC hook to init smartreflex\n", __func__);
1085
1086 ret = platform_driver_probe(&smartreflex_driver, omap_sr_probe);
1087 if (ret) {
1088 pr_err("%s: platform driver register failed for SR\n",
1089 __func__);
1090 return ret;
1091 }
1092
1093 return 0;
1094 }
1095 late_initcall(sr_init);
1096
1097 static void __exit sr_exit(void)
1098 {
1099 platform_driver_unregister(&smartreflex_driver);
1100 }
1101 module_exit(sr_exit);
1102
1103 MODULE_DESCRIPTION("OMAP Smartreflex Driver");
1104 MODULE_LICENSE("GPL");
1105 MODULE_ALIAS("platform:" DRIVER_NAME);
1106 MODULE_AUTHOR("Texas Instruments Inc");
Linux kernel - Deliverables
This page took 0.054816 seconds and 5 git commands to generate.