Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
[deliverable/linux.git] / drivers / regulator / twl-regulator.c
1 /*
2 * twl-regulator.c -- support regulators in twl4030/twl6030 family chips
3 *
4 * Copyright (C) 2008 David Brownell
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 */
11
12 #include <linux/module.h>
13 #include <linux/init.h>
14 #include <linux/err.h>
15 #include <linux/delay.h>
16 #include <linux/platform_device.h>
17 #include <linux/regulator/driver.h>
18 #include <linux/regulator/machine.h>
19 #include <linux/i2c/twl.h>
20
21
22 /*
23 * The TWL4030/TW5030/TPS659x0/TWL6030 family chips include power management, a
24 * USB OTG transceiver, an RTC, ADC, PWM, and lots more. Some versions
25 * include an audio codec, battery charger, and more voltage regulators.
26 * These chips are often used in OMAP-based systems.
27 *
28 * This driver implements software-based resource control for various
29 * voltage regulators. This is usually augmented with state machine
30 * based control.
31 */
32
33 struct twlreg_info {
34 /* start of regulator's PM_RECEIVER control register bank */
35 u8 base;
36
37 /* twl resource ID, for resource control state machine */
38 u8 id;
39
40 /* voltage in mV = table[VSEL]; table_len must be a power-of-two */
41 u8 table_len;
42 const u16 *table;
43
44 /* regulator specific turn-on delay */
45 u16 delay;
46
47 /* State REMAP default configuration */
48 u8 remap;
49
50 /* chip constraints on regulator behavior */
51 u16 min_mV;
52 u16 max_mV;
53
54 u8 flags;
55
56 /* used by regulator core */
57 struct regulator_desc desc;
58
59 /* chip specific features */
60 unsigned long features;
61 };
62
63
64 /* LDO control registers ... offset is from the base of its register bank.
65 * The first three registers of all power resource banks help hardware to
66 * manage the various resource groups.
67 */
68 /* Common offset in TWL4030/6030 */
69 #define VREG_GRP 0
70 /* TWL4030 register offsets */
71 #define VREG_TYPE 1
72 #define VREG_REMAP 2
73 #define VREG_DEDICATED 3 /* LDO control */
74 #define VREG_VOLTAGE_SMPS_4030 9
75 /* TWL6030 register offsets */
76 #define VREG_TRANS 1
77 #define VREG_STATE 2
78 #define VREG_VOLTAGE 3
79 #define VREG_VOLTAGE_SMPS 4
80 /* TWL6030 Misc register offsets */
81 #define VREG_BC_ALL 1
82 #define VREG_BC_REF 2
83 #define VREG_BC_PROC 3
84 #define VREG_BC_CLK_RST 4
85
86 /* TWL6030 LDO register values for CFG_STATE */
87 #define TWL6030_CFG_STATE_OFF 0x00
88 #define TWL6030_CFG_STATE_ON 0x01
89 #define TWL6030_CFG_STATE_OFF2 0x02
90 #define TWL6030_CFG_STATE_SLEEP 0x03
91 #define TWL6030_CFG_STATE_GRP_SHIFT 5
92 #define TWL6030_CFG_STATE_APP_SHIFT 2
93 #define TWL6030_CFG_STATE_APP_MASK (0x03 << TWL6030_CFG_STATE_APP_SHIFT)
94 #define TWL6030_CFG_STATE_APP(v) (((v) & TWL6030_CFG_STATE_APP_MASK) >>\
95 TWL6030_CFG_STATE_APP_SHIFT)
96
97 /* Flags for SMPS Voltage reading */
98 #define SMPS_OFFSET_EN BIT(0)
99 #define SMPS_EXTENDED_EN BIT(1)
100
101 /* twl6025 SMPS EPROM values */
102 #define TWL6030_SMPS_OFFSET 0xB0
103 #define TWL6030_SMPS_MULT 0xB3
104 #define SMPS_MULTOFFSET_SMPS4 BIT(0)
105 #define SMPS_MULTOFFSET_VIO BIT(1)
106 #define SMPS_MULTOFFSET_SMPS3 BIT(6)
107
108 static inline int
109 twlreg_read(struct twlreg_info *info, unsigned slave_subgp, unsigned offset)
110 {
111 u8 value;
112 int status;
113
114 status = twl_i2c_read_u8(slave_subgp,
115 &value, info->base + offset);
116 return (status < 0) ? status : value;
117 }
118
119 static inline int
120 twlreg_write(struct twlreg_info *info, unsigned slave_subgp, unsigned offset,
121 u8 value)
122 {
123 return twl_i2c_write_u8(slave_subgp,
124 value, info->base + offset);
125 }
126
127 /*----------------------------------------------------------------------*/
128
129 /* generic power resource operations, which work on all regulators */
130
131 static int twlreg_grp(struct regulator_dev *rdev)
132 {
133 return twlreg_read(rdev_get_drvdata(rdev), TWL_MODULE_PM_RECEIVER,
134 VREG_GRP);
135 }
136
137 /*
138 * Enable/disable regulators by joining/leaving the P1 (processor) group.
139 * We assume nobody else is updating the DEV_GRP registers.
140 */
141 /* definition for 4030 family */
142 #define P3_GRP_4030 BIT(7) /* "peripherals" */
143 #define P2_GRP_4030 BIT(6) /* secondary processor, modem, etc */
144 #define P1_GRP_4030 BIT(5) /* CPU/Linux */
145 /* definition for 6030 family */
146 #define P3_GRP_6030 BIT(2) /* secondary processor, modem, etc */
147 #define P2_GRP_6030 BIT(1) /* "peripherals" */
148 #define P1_GRP_6030 BIT(0) /* CPU/Linux */
149
150 static int twl4030reg_is_enabled(struct regulator_dev *rdev)
151 {
152 int state = twlreg_grp(rdev);
153
154 if (state < 0)
155 return state;
156
157 return state & P1_GRP_4030;
158 }
159
160 static int twl6030reg_is_enabled(struct regulator_dev *rdev)
161 {
162 struct twlreg_info *info = rdev_get_drvdata(rdev);
163 int grp = 0, val;
164
165 if (!(twl_class_is_6030() && (info->features & TWL6025_SUBCLASS)))
166 grp = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_GRP);
167 if (grp < 0)
168 return grp;
169
170 if (!(twl_class_is_6030() && (info->features & TWL6025_SUBCLASS)))
171 grp &= P1_GRP_6030;
172 else
173 grp = 1;
174
175 val = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_STATE);
176 val = TWL6030_CFG_STATE_APP(val);
177
178 return grp && (val == TWL6030_CFG_STATE_ON);
179 }
180
181 static int twl4030reg_enable(struct regulator_dev *rdev)
182 {
183 struct twlreg_info *info = rdev_get_drvdata(rdev);
184 int grp;
185 int ret;
186
187 grp = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_GRP);
188 if (grp < 0)
189 return grp;
190
191 grp |= P1_GRP_4030;
192
193 ret = twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_GRP, grp);
194
195 udelay(info->delay);
196
197 return ret;
198 }
199
200 static int twl6030reg_enable(struct regulator_dev *rdev)
201 {
202 struct twlreg_info *info = rdev_get_drvdata(rdev);
203 int grp = 0;
204 int ret;
205
206 if (!(twl_class_is_6030() && (info->features & TWL6025_SUBCLASS)))
207 grp = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_GRP);
208 if (grp < 0)
209 return grp;
210
211 ret = twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_STATE,
212 grp << TWL6030_CFG_STATE_GRP_SHIFT |
213 TWL6030_CFG_STATE_ON);
214
215 udelay(info->delay);
216
217 return ret;
218 }
219
220 static int twl4030reg_disable(struct regulator_dev *rdev)
221 {
222 struct twlreg_info *info = rdev_get_drvdata(rdev);
223 int grp;
224 int ret;
225
226 grp = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_GRP);
227 if (grp < 0)
228 return grp;
229
230 grp &= ~(P1_GRP_4030 | P2_GRP_4030 | P3_GRP_4030);
231
232 ret = twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_GRP, grp);
233
234 return ret;
235 }
236
237 static int twl6030reg_disable(struct regulator_dev *rdev)
238 {
239 struct twlreg_info *info = rdev_get_drvdata(rdev);
240 int grp = 0;
241 int ret;
242
243 if (!(twl_class_is_6030() && (info->features & TWL6025_SUBCLASS)))
244 grp = P1_GRP_6030 | P2_GRP_6030 | P3_GRP_6030;
245
246 /* For 6030, set the off state for all grps enabled */
247 ret = twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_STATE,
248 (grp) << TWL6030_CFG_STATE_GRP_SHIFT |
249 TWL6030_CFG_STATE_OFF);
250
251 return ret;
252 }
253
254 static int twl4030reg_get_status(struct regulator_dev *rdev)
255 {
256 int state = twlreg_grp(rdev);
257
258 if (state < 0)
259 return state;
260 state &= 0x0f;
261
262 /* assume state != WARM_RESET; we'd not be running... */
263 if (!state)
264 return REGULATOR_STATUS_OFF;
265 return (state & BIT(3))
266 ? REGULATOR_STATUS_NORMAL
267 : REGULATOR_STATUS_STANDBY;
268 }
269
270 static int twl6030reg_get_status(struct regulator_dev *rdev)
271 {
272 struct twlreg_info *info = rdev_get_drvdata(rdev);
273 int val;
274
275 val = twlreg_grp(rdev);
276 if (val < 0)
277 return val;
278
279 val = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_STATE);
280
281 switch (TWL6030_CFG_STATE_APP(val)) {
282 case TWL6030_CFG_STATE_ON:
283 return REGULATOR_STATUS_NORMAL;
284
285 case TWL6030_CFG_STATE_SLEEP:
286 return REGULATOR_STATUS_STANDBY;
287
288 case TWL6030_CFG_STATE_OFF:
289 case TWL6030_CFG_STATE_OFF2:
290 default:
291 break;
292 }
293
294 return REGULATOR_STATUS_OFF;
295 }
296
297 static int twl4030reg_set_mode(struct regulator_dev *rdev, unsigned mode)
298 {
299 struct twlreg_info *info = rdev_get_drvdata(rdev);
300 unsigned message;
301 int status;
302
303 /* We can only set the mode through state machine commands... */
304 switch (mode) {
305 case REGULATOR_MODE_NORMAL:
306 message = MSG_SINGULAR(DEV_GRP_P1, info->id, RES_STATE_ACTIVE);
307 break;
308 case REGULATOR_MODE_STANDBY:
309 message = MSG_SINGULAR(DEV_GRP_P1, info->id, RES_STATE_SLEEP);
310 break;
311 default:
312 return -EINVAL;
313 }
314
315 /* Ensure the resource is associated with some group */
316 status = twlreg_grp(rdev);
317 if (status < 0)
318 return status;
319 if (!(status & (P3_GRP_4030 | P2_GRP_4030 | P1_GRP_4030)))
320 return -EACCES;
321
322 status = twl_i2c_write_u8(TWL_MODULE_PM_MASTER,
323 message >> 8, TWL4030_PM_MASTER_PB_WORD_MSB);
324 if (status < 0)
325 return status;
326
327 return twl_i2c_write_u8(TWL_MODULE_PM_MASTER,
328 message & 0xff, TWL4030_PM_MASTER_PB_WORD_LSB);
329 }
330
331 static int twl6030reg_set_mode(struct regulator_dev *rdev, unsigned mode)
332 {
333 struct twlreg_info *info = rdev_get_drvdata(rdev);
334 int grp = 0;
335 int val;
336
337 if (!(twl_class_is_6030() && (info->features & TWL6025_SUBCLASS)))
338 grp = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_GRP);
339
340 if (grp < 0)
341 return grp;
342
343 /* Compose the state register settings */
344 val = grp << TWL6030_CFG_STATE_GRP_SHIFT;
345 /* We can only set the mode through state machine commands... */
346 switch (mode) {
347 case REGULATOR_MODE_NORMAL:
348 val |= TWL6030_CFG_STATE_ON;
349 break;
350 case REGULATOR_MODE_STANDBY:
351 val |= TWL6030_CFG_STATE_SLEEP;
352 break;
353
354 default:
355 return -EINVAL;
356 }
357
358 return twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_STATE, val);
359 }
360
361 /*----------------------------------------------------------------------*/
362
363 /*
364 * Support for adjustable-voltage LDOs uses a four bit (or less) voltage
365 * select field in its control register. We use tables indexed by VSEL
366 * to record voltages in milliVolts. (Accuracy is about three percent.)
367 *
368 * Note that VSEL values for VAUX2 changed in twl5030 and newer silicon;
369 * currently handled by listing two slightly different VAUX2 regulators,
370 * only one of which will be configured.
371 *
372 * VSEL values documented as "TI cannot support these values" are flagged
373 * in these tables as UNSUP() values; we normally won't assign them.
374 *
375 * VAUX3 at 3V is incorrectly listed in some TI manuals as unsupported.
376 * TI are revising the twl5030/tps659x0 specs to support that 3.0V setting.
377 */
378 #ifdef CONFIG_TWL4030_ALLOW_UNSUPPORTED
379 #define UNSUP_MASK 0x0000
380 #else
381 #define UNSUP_MASK 0x8000
382 #endif
383
384 #define UNSUP(x) (UNSUP_MASK | (x))
385 #define IS_UNSUP(x) (UNSUP_MASK & (x))
386 #define LDO_MV(x) (~UNSUP_MASK & (x))
387
388
389 static const u16 VAUX1_VSEL_table[] = {
390 UNSUP(1500), UNSUP(1800), 2500, 2800,
391 3000, 3000, 3000, 3000,
392 };
393 static const u16 VAUX2_4030_VSEL_table[] = {
394 UNSUP(1000), UNSUP(1000), UNSUP(1200), 1300,
395 1500, 1800, UNSUP(1850), 2500,
396 UNSUP(2600), 2800, UNSUP(2850), UNSUP(3000),
397 UNSUP(3150), UNSUP(3150), UNSUP(3150), UNSUP(3150),
398 };
399 static const u16 VAUX2_VSEL_table[] = {
400 1700, 1700, 1900, 1300,
401 1500, 1800, 2000, 2500,
402 2100, 2800, 2200, 2300,
403 2400, 2400, 2400, 2400,
404 };
405 static const u16 VAUX3_VSEL_table[] = {
406 1500, 1800, 2500, 2800,
407 3000, 3000, 3000, 3000,
408 };
409 static const u16 VAUX4_VSEL_table[] = {
410 700, 1000, 1200, UNSUP(1300),
411 1500, 1800, UNSUP(1850), 2500,
412 UNSUP(2600), 2800, UNSUP(2850), UNSUP(3000),
413 UNSUP(3150), UNSUP(3150), UNSUP(3150), UNSUP(3150),
414 };
415 static const u16 VMMC1_VSEL_table[] = {
416 1850, 2850, 3000, 3150,
417 };
418 static const u16 VMMC2_VSEL_table[] = {
419 UNSUP(1000), UNSUP(1000), UNSUP(1200), UNSUP(1300),
420 UNSUP(1500), UNSUP(1800), 1850, UNSUP(2500),
421 2600, 2800, 2850, 3000,
422 3150, 3150, 3150, 3150,
423 };
424 static const u16 VPLL1_VSEL_table[] = {
425 1000, 1200, 1300, 1800,
426 UNSUP(2800), UNSUP(3000), UNSUP(3000), UNSUP(3000),
427 };
428 static const u16 VPLL2_VSEL_table[] = {
429 700, 1000, 1200, 1300,
430 UNSUP(1500), 1800, UNSUP(1850), UNSUP(2500),
431 UNSUP(2600), UNSUP(2800), UNSUP(2850), UNSUP(3000),
432 UNSUP(3150), UNSUP(3150), UNSUP(3150), UNSUP(3150),
433 };
434 static const u16 VSIM_VSEL_table[] = {
435 UNSUP(1000), UNSUP(1200), UNSUP(1300), 1800,
436 2800, 3000, 3000, 3000,
437 };
438 static const u16 VDAC_VSEL_table[] = {
439 1200, 1300, 1800, 1800,
440 };
441 static const u16 VDD1_VSEL_table[] = {
442 800, 1450,
443 };
444 static const u16 VDD2_VSEL_table[] = {
445 800, 1450, 1500,
446 };
447 static const u16 VIO_VSEL_table[] = {
448 1800, 1850,
449 };
450 static const u16 VINTANA2_VSEL_table[] = {
451 2500, 2750,
452 };
453
454 static int twl4030ldo_list_voltage(struct regulator_dev *rdev, unsigned index)
455 {
456 struct twlreg_info *info = rdev_get_drvdata(rdev);
457 int mV = info->table[index];
458
459 return IS_UNSUP(mV) ? 0 : (LDO_MV(mV) * 1000);
460 }
461
462 static int
463 twl4030ldo_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV,
464 unsigned *selector)
465 {
466 struct twlreg_info *info = rdev_get_drvdata(rdev);
467 int vsel;
468
469 for (vsel = 0; vsel < info->table_len; vsel++) {
470 int mV = info->table[vsel];
471 int uV;
472
473 if (IS_UNSUP(mV))
474 continue;
475 uV = LDO_MV(mV) * 1000;
476
477 /* REVISIT for VAUX2, first match may not be best/lowest */
478
479 /* use the first in-range value */
480 if (min_uV <= uV && uV <= max_uV) {
481 *selector = vsel;
482 return twlreg_write(info, TWL_MODULE_PM_RECEIVER,
483 VREG_VOLTAGE, vsel);
484 }
485 }
486
487 return -EDOM;
488 }
489
490 static int twl4030ldo_get_voltage(struct regulator_dev *rdev)
491 {
492 struct twlreg_info *info = rdev_get_drvdata(rdev);
493 int vsel = twlreg_read(info, TWL_MODULE_PM_RECEIVER,
494 VREG_VOLTAGE);
495
496 if (vsel < 0)
497 return vsel;
498
499 vsel &= info->table_len - 1;
500 return LDO_MV(info->table[vsel]) * 1000;
501 }
502
503 static struct regulator_ops twl4030ldo_ops = {
504 .list_voltage = twl4030ldo_list_voltage,
505
506 .set_voltage = twl4030ldo_set_voltage,
507 .get_voltage = twl4030ldo_get_voltage,
508
509 .enable = twl4030reg_enable,
510 .disable = twl4030reg_disable,
511 .is_enabled = twl4030reg_is_enabled,
512
513 .set_mode = twl4030reg_set_mode,
514
515 .get_status = twl4030reg_get_status,
516 };
517
518 static int
519 twl4030smps_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV,
520 unsigned *selector)
521 {
522 struct twlreg_info *info = rdev_get_drvdata(rdev);
523 int vsel = DIV_ROUND_UP(min_uV - 600000, 12500);
524
525 twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_VOLTAGE_SMPS_4030,
526 vsel);
527 return 0;
528 }
529
530 static int twl4030smps_get_voltage(struct regulator_dev *rdev)
531 {
532 struct twlreg_info *info = rdev_get_drvdata(rdev);
533 int vsel = twlreg_read(info, TWL_MODULE_PM_RECEIVER,
534 VREG_VOLTAGE_SMPS_4030);
535
536 return vsel * 12500 + 600000;
537 }
538
539 static struct regulator_ops twl4030smps_ops = {
540 .set_voltage = twl4030smps_set_voltage,
541 .get_voltage = twl4030smps_get_voltage,
542 };
543
544 static int twl6030ldo_list_voltage(struct regulator_dev *rdev, unsigned index)
545 {
546 struct twlreg_info *info = rdev_get_drvdata(rdev);
547
548 return ((info->min_mV + (index * 100)) * 1000);
549 }
550
551 static int
552 twl6030ldo_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV,
553 unsigned *selector)
554 {
555 struct twlreg_info *info = rdev_get_drvdata(rdev);
556 int vsel;
557
558 if ((min_uV/1000 < info->min_mV) || (max_uV/1000 > info->max_mV))
559 return -EDOM;
560
561 /*
562 * Use the below formula to calculate vsel
563 * mV = 1000mv + 100mv * (vsel - 1)
564 */
565 vsel = (min_uV/1000 - 1000)/100 + 1;
566 *selector = vsel;
567 return twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_VOLTAGE, vsel);
568
569 }
570
571 static int twl6030ldo_get_voltage(struct regulator_dev *rdev)
572 {
573 struct twlreg_info *info = rdev_get_drvdata(rdev);
574 int vsel = twlreg_read(info, TWL_MODULE_PM_RECEIVER,
575 VREG_VOLTAGE);
576
577 if (vsel < 0)
578 return vsel;
579
580 /*
581 * Use the below formula to calculate vsel
582 * mV = 1000mv + 100mv * (vsel - 1)
583 */
584 return (1000 + (100 * (vsel - 1))) * 1000;
585 }
586
587 static struct regulator_ops twl6030ldo_ops = {
588 .list_voltage = twl6030ldo_list_voltage,
589
590 .set_voltage = twl6030ldo_set_voltage,
591 .get_voltage = twl6030ldo_get_voltage,
592
593 .enable = twl6030reg_enable,
594 .disable = twl6030reg_disable,
595 .is_enabled = twl6030reg_is_enabled,
596
597 .set_mode = twl6030reg_set_mode,
598
599 .get_status = twl6030reg_get_status,
600 };
601
602 /*----------------------------------------------------------------------*/
603
604 /*
605 * Fixed voltage LDOs don't have a VSEL field to update.
606 */
607 static int twlfixed_list_voltage(struct regulator_dev *rdev, unsigned index)
608 {
609 struct twlreg_info *info = rdev_get_drvdata(rdev);
610
611 return info->min_mV * 1000;
612 }
613
614 static int twlfixed_get_voltage(struct regulator_dev *rdev)
615 {
616 struct twlreg_info *info = rdev_get_drvdata(rdev);
617
618 return info->min_mV * 1000;
619 }
620
621 static struct regulator_ops twl4030fixed_ops = {
622 .list_voltage = twlfixed_list_voltage,
623
624 .get_voltage = twlfixed_get_voltage,
625
626 .enable = twl4030reg_enable,
627 .disable = twl4030reg_disable,
628 .is_enabled = twl4030reg_is_enabled,
629
630 .set_mode = twl4030reg_set_mode,
631
632 .get_status = twl4030reg_get_status,
633 };
634
635 static struct regulator_ops twl6030fixed_ops = {
636 .list_voltage = twlfixed_list_voltage,
637
638 .get_voltage = twlfixed_get_voltage,
639
640 .enable = twl6030reg_enable,
641 .disable = twl6030reg_disable,
642 .is_enabled = twl6030reg_is_enabled,
643
644 .set_mode = twl6030reg_set_mode,
645
646 .get_status = twl6030reg_get_status,
647 };
648
649 static struct regulator_ops twl6030_fixed_resource = {
650 .enable = twl6030reg_enable,
651 .disable = twl6030reg_disable,
652 .is_enabled = twl6030reg_is_enabled,
653 .get_status = twl6030reg_get_status,
654 };
655
656 /*
657 * SMPS status and control
658 */
659
660 static int twl6030smps_list_voltage(struct regulator_dev *rdev, unsigned index)
661 {
662 struct twlreg_info *info = rdev_get_drvdata(rdev);
663
664 int voltage = 0;
665
666 switch (info->flags) {
667 case SMPS_OFFSET_EN:
668 voltage = 100000;
669 /* fall through */
670 case 0:
671 switch (index) {
672 case 0:
673 voltage = 0;
674 break;
675 case 58:
676 voltage = 1350 * 1000;
677 break;
678 case 59:
679 voltage = 1500 * 1000;
680 break;
681 case 60:
682 voltage = 1800 * 1000;
683 break;
684 case 61:
685 voltage = 1900 * 1000;
686 break;
687 case 62:
688 voltage = 2100 * 1000;
689 break;
690 default:
691 voltage += (600000 + (12500 * (index - 1)));
692 }
693 break;
694 case SMPS_EXTENDED_EN:
695 switch (index) {
696 case 0:
697 voltage = 0;
698 break;
699 case 58:
700 voltage = 2084 * 1000;
701 break;
702 case 59:
703 voltage = 2315 * 1000;
704 break;
705 case 60:
706 voltage = 2778 * 1000;
707 break;
708 case 61:
709 voltage = 2932 * 1000;
710 break;
711 case 62:
712 voltage = 3241 * 1000;
713 break;
714 default:
715 voltage = (1852000 + (38600 * (index - 1)));
716 }
717 break;
718 case SMPS_OFFSET_EN | SMPS_EXTENDED_EN:
719 switch (index) {
720 case 0:
721 voltage = 0;
722 break;
723 case 58:
724 voltage = 4167 * 1000;
725 break;
726 case 59:
727 voltage = 2315 * 1000;
728 break;
729 case 60:
730 voltage = 2778 * 1000;
731 break;
732 case 61:
733 voltage = 2932 * 1000;
734 break;
735 case 62:
736 voltage = 3241 * 1000;
737 break;
738 default:
739 voltage = (2161000 + (38600 * (index - 1)));
740 }
741 break;
742 }
743
744 return voltage;
745 }
746
747 static int
748 twl6030smps_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV,
749 unsigned int *selector)
750 {
751 struct twlreg_info *info = rdev_get_drvdata(rdev);
752 int vsel = 0;
753
754 switch (info->flags) {
755 case 0:
756 if (min_uV == 0)
757 vsel = 0;
758 else if ((min_uV >= 600000) && (max_uV <= 1300000)) {
759 vsel = (min_uV - 600000) / 125;
760 if (vsel % 100)
761 vsel += 100;
762 vsel /= 100;
763 vsel++;
764 }
765 /* Values 1..57 for vsel are linear and can be calculated
766 * values 58..62 are non linear.
767 */
768 else if ((min_uV > 1900000) && (max_uV >= 2100000))
769 vsel = 62;
770 else if ((min_uV > 1800000) && (max_uV >= 1900000))
771 vsel = 61;
772 else if ((min_uV > 1500000) && (max_uV >= 1800000))
773 vsel = 60;
774 else if ((min_uV > 1350000) && (max_uV >= 1500000))
775 vsel = 59;
776 else if ((min_uV > 1300000) && (max_uV >= 1350000))
777 vsel = 58;
778 else
779 return -EINVAL;
780 break;
781 case SMPS_OFFSET_EN:
782 if (min_uV == 0)
783 vsel = 0;
784 else if ((min_uV >= 700000) && (max_uV <= 1420000)) {
785 vsel = (min_uV - 700000) / 125;
786 if (vsel % 100)
787 vsel += 100;
788 vsel /= 100;
789 vsel++;
790 }
791 /* Values 1..57 for vsel are linear and can be calculated
792 * values 58..62 are non linear.
793 */
794 else if ((min_uV > 1900000) && (max_uV >= 2100000))
795 vsel = 62;
796 else if ((min_uV > 1800000) && (max_uV >= 1900000))
797 vsel = 61;
798 else if ((min_uV > 1350000) && (max_uV >= 1800000))
799 vsel = 60;
800 else if ((min_uV > 1350000) && (max_uV >= 1500000))
801 vsel = 59;
802 else if ((min_uV > 1300000) && (max_uV >= 1350000))
803 vsel = 58;
804 else
805 return -EINVAL;
806 break;
807 case SMPS_EXTENDED_EN:
808 if (min_uV == 0)
809 vsel = 0;
810 else if ((min_uV >= 1852000) && (max_uV <= 4013600)) {
811 vsel = (min_uV - 1852000) / 386;
812 if (vsel % 100)
813 vsel += 100;
814 vsel /= 100;
815 vsel++;
816 }
817 break;
818 case SMPS_OFFSET_EN|SMPS_EXTENDED_EN:
819 if (min_uV == 0)
820 vsel = 0;
821 else if ((min_uV >= 2161000) && (max_uV <= 4321000)) {
822 vsel = (min_uV - 1852000) / 386;
823 if (vsel % 100)
824 vsel += 100;
825 vsel /= 100;
826 vsel++;
827 }
828 break;
829 }
830
831 *selector = vsel;
832
833 return twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_VOLTAGE_SMPS,
834 vsel);
835 }
836
837 static int twl6030smps_get_voltage_sel(struct regulator_dev *rdev)
838 {
839 struct twlreg_info *info = rdev_get_drvdata(rdev);
840
841 return twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_VOLTAGE_SMPS);
842 }
843
844 static struct regulator_ops twlsmps_ops = {
845 .list_voltage = twl6030smps_list_voltage,
846
847 .set_voltage = twl6030smps_set_voltage,
848 .get_voltage_sel = twl6030smps_get_voltage_sel,
849
850 .enable = twl6030reg_enable,
851 .disable = twl6030reg_disable,
852 .is_enabled = twl6030reg_is_enabled,
853
854 .set_mode = twl6030reg_set_mode,
855
856 .get_status = twl6030reg_get_status,
857 };
858
859 /*----------------------------------------------------------------------*/
860
861 #define TWL4030_FIXED_LDO(label, offset, mVolts, num, turnon_delay, \
862 remap_conf) \
863 TWL_FIXED_LDO(label, offset, mVolts, num, turnon_delay, \
864 remap_conf, TWL4030, twl4030fixed_ops)
865 #define TWL6030_FIXED_LDO(label, offset, mVolts, turnon_delay) \
866 TWL_FIXED_LDO(label, offset, mVolts, 0x0, turnon_delay, \
867 0x0, TWL6030, twl6030fixed_ops)
868
869 #define TWL4030_ADJUSTABLE_LDO(label, offset, num, turnon_delay, remap_conf) { \
870 .base = offset, \
871 .id = num, \
872 .table_len = ARRAY_SIZE(label##_VSEL_table), \
873 .table = label##_VSEL_table, \
874 .delay = turnon_delay, \
875 .remap = remap_conf, \
876 .desc = { \
877 .name = #label, \
878 .id = TWL4030_REG_##label, \
879 .n_voltages = ARRAY_SIZE(label##_VSEL_table), \
880 .ops = &twl4030ldo_ops, \
881 .type = REGULATOR_VOLTAGE, \
882 .owner = THIS_MODULE, \
883 }, \
884 }
885
886 #define TWL4030_ADJUSTABLE_SMPS(label, offset, num, turnon_delay, remap_conf) \
887 { \
888 .base = offset, \
889 .id = num, \
890 .delay = turnon_delay, \
891 .remap = remap_conf, \
892 .desc = { \
893 .name = #label, \
894 .id = TWL4030_REG_##label, \
895 .ops = &twl4030smps_ops, \
896 .type = REGULATOR_VOLTAGE, \
897 .owner = THIS_MODULE, \
898 }, \
899 }
900
901 #define TWL6030_ADJUSTABLE_LDO(label, offset, min_mVolts, max_mVolts) { \
902 .base = offset, \
903 .min_mV = min_mVolts, \
904 .max_mV = max_mVolts, \
905 .desc = { \
906 .name = #label, \
907 .id = TWL6030_REG_##label, \
908 .n_voltages = (max_mVolts - min_mVolts)/100 + 1, \
909 .ops = &twl6030ldo_ops, \
910 .type = REGULATOR_VOLTAGE, \
911 .owner = THIS_MODULE, \
912 }, \
913 }
914
915 #define TWL6025_ADJUSTABLE_LDO(label, offset, min_mVolts, max_mVolts) { \
916 .base = offset, \
917 .min_mV = min_mVolts, \
918 .max_mV = max_mVolts, \
919 .desc = { \
920 .name = #label, \
921 .id = TWL6025_REG_##label, \
922 .n_voltages = ((max_mVolts - min_mVolts)/100) + 1, \
923 .ops = &twl6030ldo_ops, \
924 .type = REGULATOR_VOLTAGE, \
925 .owner = THIS_MODULE, \
926 }, \
927 }
928
929 #define TWL_FIXED_LDO(label, offset, mVolts, num, turnon_delay, remap_conf, \
930 family, operations) { \
931 .base = offset, \
932 .id = num, \
933 .min_mV = mVolts, \
934 .delay = turnon_delay, \
935 .remap = remap_conf, \
936 .desc = { \
937 .name = #label, \
938 .id = family##_REG_##label, \
939 .n_voltages = 1, \
940 .ops = &operations, \
941 .type = REGULATOR_VOLTAGE, \
942 .owner = THIS_MODULE, \
943 }, \
944 }
945
946 #define TWL6030_FIXED_RESOURCE(label, offset, turnon_delay) { \
947 .base = offset, \
948 .delay = turnon_delay, \
949 .desc = { \
950 .name = #label, \
951 .id = TWL6030_REG_##label, \
952 .ops = &twl6030_fixed_resource, \
953 .type = REGULATOR_VOLTAGE, \
954 .owner = THIS_MODULE, \
955 }, \
956 }
957
958 #define TWL6025_ADJUSTABLE_SMPS(label, offset) { \
959 .base = offset, \
960 .min_mV = 600, \
961 .max_mV = 2100, \
962 .desc = { \
963 .name = #label, \
964 .id = TWL6025_REG_##label, \
965 .n_voltages = 63, \
966 .ops = &twlsmps_ops, \
967 .type = REGULATOR_VOLTAGE, \
968 .owner = THIS_MODULE, \
969 }, \
970 }
971
972 /*
973 * We list regulators here if systems need some level of
974 * software control over them after boot.
975 */
976 static struct twlreg_info twl_regs[] = {
977 TWL4030_ADJUSTABLE_LDO(VAUX1, 0x17, 1, 100, 0x08),
978 TWL4030_ADJUSTABLE_LDO(VAUX2_4030, 0x1b, 2, 100, 0x08),
979 TWL4030_ADJUSTABLE_LDO(VAUX2, 0x1b, 2, 100, 0x08),
980 TWL4030_ADJUSTABLE_LDO(VAUX3, 0x1f, 3, 100, 0x08),
981 TWL4030_ADJUSTABLE_LDO(VAUX4, 0x23, 4, 100, 0x08),
982 TWL4030_ADJUSTABLE_LDO(VMMC1, 0x27, 5, 100, 0x08),
983 TWL4030_ADJUSTABLE_LDO(VMMC2, 0x2b, 6, 100, 0x08),
984 TWL4030_ADJUSTABLE_LDO(VPLL1, 0x2f, 7, 100, 0x00),
985 TWL4030_ADJUSTABLE_LDO(VPLL2, 0x33, 8, 100, 0x08),
986 TWL4030_ADJUSTABLE_LDO(VSIM, 0x37, 9, 100, 0x00),
987 TWL4030_ADJUSTABLE_LDO(VDAC, 0x3b, 10, 100, 0x08),
988 TWL4030_FIXED_LDO(VINTANA1, 0x3f, 1500, 11, 100, 0x08),
989 TWL4030_ADJUSTABLE_LDO(VINTANA2, 0x43, 12, 100, 0x08),
990 TWL4030_FIXED_LDO(VINTDIG, 0x47, 1500, 13, 100, 0x08),
991 TWL4030_ADJUSTABLE_LDO(VIO, 0x4b, 14, 1000, 0x08),
992 TWL4030_ADJUSTABLE_SMPS(VDD1, 0x55, 15, 1000, 0x08),
993 TWL4030_ADJUSTABLE_SMPS(VDD2, 0x63, 16, 1000, 0x08),
994 TWL4030_FIXED_LDO(VUSB1V5, 0x71, 1500, 17, 100, 0x08),
995 TWL4030_FIXED_LDO(VUSB1V8, 0x74, 1800, 18, 100, 0x08),
996 TWL4030_FIXED_LDO(VUSB3V1, 0x77, 3100, 19, 150, 0x08),
997 /* VUSBCP is managed *only* by the USB subchip */
998
999 /* 6030 REG with base as PMC Slave Misc : 0x0030 */
1000 /* Turnon-delay and remap configuration values for 6030 are not
1001 verified since the specification is not public */
1002 TWL6030_ADJUSTABLE_LDO(VAUX1_6030, 0x54, 1000, 3300),
1003 TWL6030_ADJUSTABLE_LDO(VAUX2_6030, 0x58, 1000, 3300),
1004 TWL6030_ADJUSTABLE_LDO(VAUX3_6030, 0x5c, 1000, 3300),
1005 TWL6030_ADJUSTABLE_LDO(VMMC, 0x68, 1000, 3300),
1006 TWL6030_ADJUSTABLE_LDO(VPP, 0x6c, 1000, 3300),
1007 TWL6030_ADJUSTABLE_LDO(VUSIM, 0x74, 1000, 3300),
1008 TWL6030_FIXED_LDO(VANA, 0x50, 2100, 0),
1009 TWL6030_FIXED_LDO(VCXIO, 0x60, 1800, 0),
1010 TWL6030_FIXED_LDO(VDAC, 0x64, 1800, 0),
1011 TWL6030_FIXED_LDO(VUSB, 0x70, 3300, 0),
1012 TWL6030_FIXED_RESOURCE(CLK32KG, 0x8C, 0),
1013
1014 /* 6025 are renamed compared to 6030 versions */
1015 TWL6025_ADJUSTABLE_LDO(LDO2, 0x54, 1000, 3300),
1016 TWL6025_ADJUSTABLE_LDO(LDO4, 0x58, 1000, 3300),
1017 TWL6025_ADJUSTABLE_LDO(LDO3, 0x5c, 1000, 3300),
1018 TWL6025_ADJUSTABLE_LDO(LDO5, 0x68, 1000, 3300),
1019 TWL6025_ADJUSTABLE_LDO(LDO1, 0x6c, 1000, 3300),
1020 TWL6025_ADJUSTABLE_LDO(LDO7, 0x74, 1000, 3300),
1021 TWL6025_ADJUSTABLE_LDO(LDO6, 0x60, 1000, 3300),
1022 TWL6025_ADJUSTABLE_LDO(LDOLN, 0x64, 1000, 3300),
1023 TWL6025_ADJUSTABLE_LDO(LDOUSB, 0x70, 1000, 3300),
1024
1025 TWL6025_ADJUSTABLE_SMPS(SMPS3, 0x34),
1026 TWL6025_ADJUSTABLE_SMPS(SMPS4, 0x10),
1027 TWL6025_ADJUSTABLE_SMPS(VIO, 0x16),
1028 };
1029
1030 static u8 twl_get_smps_offset(void)
1031 {
1032 u8 value;
1033
1034 twl_i2c_read_u8(TWL_MODULE_PM_RECEIVER, &value,
1035 TWL6030_SMPS_OFFSET);
1036 return value;
1037 }
1038
1039 static u8 twl_get_smps_mult(void)
1040 {
1041 u8 value;
1042
1043 twl_i2c_read_u8(TWL_MODULE_PM_RECEIVER, &value,
1044 TWL6030_SMPS_MULT);
1045 return value;
1046 }
1047
1048 static int __devinit twlreg_probe(struct platform_device *pdev)
1049 {
1050 int i;
1051 struct twlreg_info *info;
1052 struct regulator_init_data *initdata;
1053 struct regulation_constraints *c;
1054 struct regulator_dev *rdev;
1055
1056 for (i = 0, info = NULL; i < ARRAY_SIZE(twl_regs); i++) {
1057 if (twl_regs[i].desc.id != pdev->id)
1058 continue;
1059 info = twl_regs + i;
1060 break;
1061 }
1062 if (!info)
1063 return -ENODEV;
1064
1065 initdata = pdev->dev.platform_data;
1066 if (!initdata)
1067 return -EINVAL;
1068
1069 /* copy the features into regulator data */
1070 info->features = (unsigned long)initdata->driver_data;
1071
1072 /* Constrain board-specific capabilities according to what
1073 * this driver and the chip itself can actually do.
1074 */
1075 c = &initdata->constraints;
1076 c->valid_modes_mask &= REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY;
1077 c->valid_ops_mask &= REGULATOR_CHANGE_VOLTAGE
1078 | REGULATOR_CHANGE_MODE
1079 | REGULATOR_CHANGE_STATUS;
1080 switch (pdev->id) {
1081 case TWL4030_REG_VIO:
1082 case TWL4030_REG_VDD1:
1083 case TWL4030_REG_VDD2:
1084 case TWL4030_REG_VPLL1:
1085 case TWL4030_REG_VINTANA1:
1086 case TWL4030_REG_VINTANA2:
1087 case TWL4030_REG_VINTDIG:
1088 c->always_on = true;
1089 break;
1090 default:
1091 break;
1092 }
1093
1094 switch (pdev->id) {
1095 case TWL6025_REG_SMPS3:
1096 if (twl_get_smps_mult() & SMPS_MULTOFFSET_SMPS3)
1097 info->flags |= SMPS_EXTENDED_EN;
1098 if (twl_get_smps_offset() & SMPS_MULTOFFSET_SMPS3)
1099 info->flags |= SMPS_OFFSET_EN;
1100 break;
1101 case TWL6025_REG_SMPS4:
1102 if (twl_get_smps_mult() & SMPS_MULTOFFSET_SMPS4)
1103 info->flags |= SMPS_EXTENDED_EN;
1104 if (twl_get_smps_offset() & SMPS_MULTOFFSET_SMPS4)
1105 info->flags |= SMPS_OFFSET_EN;
1106 break;
1107 case TWL6025_REG_VIO:
1108 if (twl_get_smps_mult() & SMPS_MULTOFFSET_VIO)
1109 info->flags |= SMPS_EXTENDED_EN;
1110 if (twl_get_smps_offset() & SMPS_MULTOFFSET_VIO)
1111 info->flags |= SMPS_OFFSET_EN;
1112 break;
1113 }
1114
1115 rdev = regulator_register(&info->desc, &pdev->dev, initdata, info);
1116 if (IS_ERR(rdev)) {
1117 dev_err(&pdev->dev, "can't register %s, %ld\n",
1118 info->desc.name, PTR_ERR(rdev));
1119 return PTR_ERR(rdev);
1120 }
1121 platform_set_drvdata(pdev, rdev);
1122
1123 if (twl_class_is_4030())
1124 twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_REMAP,
1125 info->remap);
1126
1127 /* NOTE: many regulators support short-circuit IRQs (presentable
1128 * as REGULATOR_OVER_CURRENT notifications?) configured via:
1129 * - SC_CONFIG
1130 * - SC_DETECT1 (vintana2, vmmc1/2, vaux1/2/3/4)
1131 * - SC_DETECT2 (vusb, vdac, vio, vdd1/2, vpll2)
1132 * - IT_CONFIG
1133 */
1134
1135 return 0;
1136 }
1137
1138 static int __devexit twlreg_remove(struct platform_device *pdev)
1139 {
1140 regulator_unregister(platform_get_drvdata(pdev));
1141 return 0;
1142 }
1143
1144 MODULE_ALIAS("platform:twl_reg");
1145
1146 static struct platform_driver twlreg_driver = {
1147 .probe = twlreg_probe,
1148 .remove = __devexit_p(twlreg_remove),
1149 /* NOTE: short name, to work around driver model truncation of
1150 * "twl_regulator.12" (and friends) to "twl_regulator.1".
1151 */
1152 .driver.name = "twl_reg",
1153 .driver.owner = THIS_MODULE,
1154 };
1155
1156 static int __init twlreg_init(void)
1157 {
1158 return platform_driver_register(&twlreg_driver);
1159 }
1160 subsys_initcall(twlreg_init);
1161
1162 static void __exit twlreg_exit(void)
1163 {
1164 platform_driver_unregister(&twlreg_driver);
1165 }
1166 module_exit(twlreg_exit)
1167
1168 MODULE_DESCRIPTION("TWL regulator driver");
1169 MODULE_LICENSE("GPL");
This page took 0.078639 seconds and 6 git commands to generate.