2 * Linux driver attachment glue for aic7770 based controllers.
4 * Copyright (c) 2000-2003 Adaptec Inc.
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions, and the following disclaimer,
12 * without modification.
13 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
14 * substantially similar to the "NO WARRANTY" disclaimer below
15 * ("Disclaimer") and any redistribution must be conditioned upon
16 * including a substantially similar Disclaimer requirement for further
17 * binary redistribution.
18 * 3. Neither the names of the above-listed copyright holders nor the names
19 * of any contributors may be used to endorse or promote products derived
20 * from this software without specific prior written permission.
22 * Alternatively, this software may be distributed under the terms of the
23 * GNU General Public License ("GPL") version 2 as published by the Free
24 * Software Foundation.
27 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
28 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
29 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
30 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
31 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
32 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
33 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
34 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
35 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
36 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
37 * POSSIBILITY OF SUCH DAMAGES.
39 * $Id: //depot/aic7xxx/linux/drivers/scsi/aic7xxx/aic7770_osm.c#14 $
42 #include "aic7xxx_osm.h"
44 #include <linux/device.h>
45 #include <linux/eisa.h>
47 #define EISA_MFCTR_CHAR0(ID) (char)(((ID>>26) & 0x1F) | '@') /* Bits 26-30 */
48 #define EISA_MFCTR_CHAR1(ID) (char)(((ID>>21) & 0x1F) | '@') /* Bits 21-25 */
49 #define EISA_MFCTR_CHAR2(ID) (char)(((ID>>16) & 0x1F) | '@') /* Bits 16-20 */
50 #define EISA_PRODUCT_ID(ID) (short)((ID>>4) & 0xFFF) /* Bits 4-15 */
51 #define EISA_REVISION_ID(ID) (uint8_t)(ID & 0x0F) /* Bits 0-3 */
53 static int aic7770_eisa_dev_probe(struct device
*dev
);
54 static int aic7770_eisa_dev_remove(struct device
*dev
);
55 static struct eisa_driver aic7770_driver
= {
58 .probe
= aic7770_eisa_dev_probe
,
59 .remove
= aic7770_eisa_dev_remove
,
63 typedef struct device
*aic7770_dev_t
;
65 static int aic7770_linux_config(struct aic7770_identity
*entry
,
66 aic7770_dev_t dev
, u_int eisaBase
);
69 ahc_linux_eisa_init(void)
71 struct eisa_device_id
*eid
;
72 struct aic7770_identity
*id
;
75 if (aic7xxx_probe_eisa_vl
== 0)
79 * Linux requires the EISA IDs to be specified in
80 * the EISA ID string format. Perform the conversion
81 * and setup a table with a NUL terminal entry.
83 aic7770_driver
.id_table
= malloc(sizeof(struct eisa_device_id
) *
84 (ahc_num_aic7770_devs
+ 1),
86 if (aic7770_driver
.id_table
== NULL
)
89 for (eid
= (struct eisa_device_id
*)aic7770_driver
.id_table
,
90 id
= aic7770_ident_table
, i
= 0;
91 i
< ahc_num_aic7770_devs
; eid
++, id
++, i
++) {
93 sprintf(eid
->sig
, "%c%c%c%03X%01X",
94 EISA_MFCTR_CHAR0(id
->full_id
),
95 EISA_MFCTR_CHAR1(id
->full_id
),
96 EISA_MFCTR_CHAR2(id
->full_id
),
97 EISA_PRODUCT_ID(id
->full_id
),
98 EISA_REVISION_ID(id
->full_id
));
103 return eisa_driver_register(&aic7770_driver
);
107 ahc_linux_eisa_exit(void)
109 if(aic7xxx_probe_eisa_vl
!= 0 && aic7770_driver
.id_table
!= NULL
) {
110 eisa_driver_unregister(&aic7770_driver
);
111 free(aic7770_driver
.id_table
, M_DEVBUF
);
116 aic7770_linux_config(struct aic7770_identity
*entry
, aic7770_dev_t dev
,
119 struct ahc_softc
*ahc
;
125 * Allocate a softc for this card and
126 * set it up for attachment by our
127 * common detect routine.
129 sprintf(buf
, "ahc_eisa:%d", eisaBase
>> 12);
130 name
= malloc(strlen(buf
) + 1, M_DEVBUF
, M_NOWAIT
);
134 ahc
= ahc_alloc(&aic7xxx_driver_template
, name
);
137 error
= aic7770_config(ahc
, entry
, eisaBase
);
144 dev
->driver_data
= (void *)ahc
;
145 if (aic7xxx_detect_complete
)
146 error
= ahc_linux_register_host(ahc
, &aic7xxx_driver_template
);
151 aic7770_map_registers(struct ahc_softc
*ahc
, u_int port
)
154 * Lock out other contenders for our i/o space.
156 if (request_region(port
, AHC_EISA_IOSIZE
, "aic7xxx") == 0)
158 ahc
->tag
= BUS_SPACE_PIO
;
159 ahc
->bsh
.ioport
= port
;
164 aic7770_map_int(struct ahc_softc
*ahc
, u_int irq
)
170 if ((ahc
->flags
& AHC_EDGE_INTERRUPT
) == 0)
173 error
= request_irq(irq
, ahc_linux_isr
, shared
, "aic7xxx", ahc
);
175 ahc
->platform_data
->irq
= irq
;
181 aic7770_eisa_dev_probe(struct device
*dev
)
183 struct eisa_device
*edev
;
185 edev
= to_eisa_device(dev
);
186 return (aic7770_linux_config(aic7770_ident_table
+ edev
->id
.driver_data
,
187 dev
, edev
->base_addr
+AHC_EISA_SLOT_OFFSET
));
191 aic7770_eisa_dev_remove(struct device
*dev
)
193 struct ahc_softc
*ahc
;
197 * We should be able to just perform
198 * the free directly, but check our
199 * list for extra sanity.
202 ahc
= ahc_find_softc((struct ahc_softc
*)dev
->driver_data
);
207 ahc_intr_enable(ahc
, FALSE
);