2 * in2000.h - Linux device driver definitions for the
3 * Always IN2000 ISA SCSI card.
5 * IMPORTANT: This file is for version 1.33 - 26/Aug/1998
7 * Copyright (c) 1996 John Shifflett, GeoLog Consulting
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2, or (at your option)
16 * This program is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
28 #define PROC_INTERFACE /* add code for /proc/scsi/in2000/xxx interface */
30 #define PROC_STATISTICS /* add code for keeping various real time stats */
33 #define SYNC_DEBUG /* extra info on sync negotiation printed */
34 #define DEBUGGING_ON /* enable command-line debugging bitmask */
35 #define DEBUG_DEFAULTS 0 /* default bitmask - change from command-line */
38 #define FAST_READ_IO /* No problems with these on my machine */
43 #define DB(f,a) if (hostdata->args & (f)) a;
44 #define CHECK_NULL(p,s) /* if (!(p)) {printk("\n"); while (1) printk("NP:%s\r",(s));} */
47 #define CHECK_NULL(p,s)
50 #define uchar unsigned char
52 #define read1_io(a) (inb(hostdata->io_base+(a)))
53 #define read2_io(a) (inw(hostdata->io_base+(a)))
54 #define write1_io(b,a) (outb((b),hostdata->io_base+(a)))
55 #define write2_io(w,a) (outw((w),hostdata->io_base+(a)))
58 /* These inline assembly defines are derived from a patch
59 * sent to me by Bill Earnest. He's done a lot of very
60 * valuable thinking, testing, and coding during his effort
61 * to squeeze more speed out of this driver. I really think
62 * that we are doing IO at close to the maximum now with
63 * the fifo. (And yes, insw uses 'edi' while outsw uses
64 * 'esi'. Thanks Bill!)
67 #define FAST_READ2_IO() \
69 int __dummy_1,__dummy_2; \
70 __asm__ __volatile__ ("\n \
75 insw (%%dx),%%es:(%%edi) \n \
77 : "=D" (sp) ,"=c" (__dummy_1) ,"=d" (__dummy_2) /* output */ \
78 : "2" (f), "0" (sp), "1" (i) /* input */ \
82 #define FAST_WRITE2_IO() \
84 int __dummy_1,__dummy_2; \
85 __asm__ __volatile__ ("\n \
90 outsw %%ds:(%%esi),(%%dx) \n \
92 : "=S" (sp) ,"=c" (__dummy_1) ,"=d" (__dummy_2)/* output */ \
93 : "2" (f), "0" (sp), "1" (i) /* input */ \
98 /* IN2000 io_port offsets */
99 #define IO_WD_ASR 0x00 /* R - 3393 auxstat reg */
106 #define IO_WD_ADDR 0x00 /* W - 3393 address reg */
107 #define IO_WD_DATA 0x01 /* R/W - rest of 3393 regs */
108 #define IO_FIFO 0x02 /* R/W - in2000 dual-port fifo (16 bits) */
109 #define IN2000_FIFO_SIZE 2048 /* fifo capacity in bytes */
110 #define IO_CARD_RESET 0x03 /* W - in2000 start master reset */
111 #define IO_FIFO_COUNT 0x04 /* R - in2000 fifo counter */
112 #define IO_FIFO_WRITE 0x05 /* W - clear fifo counter, start write */
113 #define IO_FIFO_READ 0x07 /* W - start fifo read */
114 #define IO_LED_OFF 0x08 /* W - turn off in2000 activity LED */
115 #define IO_SWITCHES 0x08 /* R - read in2000 dip switch */
116 #define SW_ADDR0 0x01 /* bit 0 = bit 0 of index to io addr */
117 #define SW_ADDR1 0x02 /* bit 1 = bit 1 of index io addr */
118 #define SW_DISINT 0x04 /* bit 2 true if ints disabled */
119 #define SW_INT0 0x08 /* bit 3 = bit 0 of index to interrupt */
120 #define SW_INT1 0x10 /* bit 4 = bit 1 of index to interrupt */
121 #define SW_INT_SHIFT 3 /* shift right this amount to right justify int bits */
122 #define SW_SYNC_DOS5 0x20 /* bit 5 used by Always BIOS */
123 #define SW_FLOPPY 0x40 /* bit 6 true if floppy enabled */
124 #define SW_BIT7 0x80 /* bit 7 hardwired true (ground) */
125 #define IO_LED_ON 0x09 /* W - turn on in2000 activity LED */
126 #define IO_HARDWARE 0x0a /* R - read in2000 hardware rev, stop reset */
127 #define IO_INTR_MASK 0x0c /* W - in2000 interrupt mask reg */
128 #define IMASK_WD 0x01 /* WD33c93 interrupt mask */
129 #define IMASK_FIFO 0x02 /* FIFO interrupt mask */
131 /* wd register names */
132 #define WD_OWN_ID 0x00
133 #define WD_CONTROL 0x01
134 #define WD_TIMEOUT_PERIOD 0x02
135 #define WD_CDB_1 0x03
136 #define WD_CDB_2 0x04
137 #define WD_CDB_3 0x05
138 #define WD_CDB_4 0x06
139 #define WD_CDB_5 0x07
140 #define WD_CDB_6 0x08
141 #define WD_CDB_7 0x09
142 #define WD_CDB_8 0x0a
143 #define WD_CDB_9 0x0b
144 #define WD_CDB_10 0x0c
145 #define WD_CDB_11 0x0d
146 #define WD_CDB_12 0x0e
147 #define WD_TARGET_LUN 0x0f
148 #define WD_COMMAND_PHASE 0x10
149 #define WD_SYNCHRONOUS_TRANSFER 0x11
150 #define WD_TRANSFER_COUNT_MSB 0x12
151 #define WD_TRANSFER_COUNT 0x13
152 #define WD_TRANSFER_COUNT_LSB 0x14
153 #define WD_DESTINATION_ID 0x15
154 #define WD_SOURCE_ID 0x16
155 #define WD_SCSI_STATUS 0x17
156 #define WD_COMMAND 0x18
158 #define WD_QUEUE_TAG 0x1a
159 #define WD_AUXILIARY_STATUS 0x1f
162 #define WD_CMD_RESET 0x00
163 #define WD_CMD_ABORT 0x01
164 #define WD_CMD_ASSERT_ATN 0x02
165 #define WD_CMD_NEGATE_ACK 0x03
166 #define WD_CMD_DISCONNECT 0x04
167 #define WD_CMD_RESELECT 0x05
168 #define WD_CMD_SEL_ATN 0x06
169 #define WD_CMD_SEL 0x07
170 #define WD_CMD_SEL_ATN_XFER 0x08
171 #define WD_CMD_SEL_XFER 0x09
172 #define WD_CMD_RESEL_RECEIVE 0x0a
173 #define WD_CMD_RESEL_SEND 0x0b
174 #define WD_CMD_WAIT_SEL_RECEIVE 0x0c
175 #define WD_CMD_TRANS_ADDR 0x18
176 #define WD_CMD_TRANS_INFO 0x20
177 #define WD_CMD_TRANSFER_PAD 0x21
178 #define WD_CMD_SBT_MODE 0x80
180 /* SCSI Bus Phases */
181 #define PHS_DATA_OUT 0x00
182 #define PHS_DATA_IN 0x01
183 #define PHS_COMMAND 0x02
184 #define PHS_STATUS 0x03
185 #define PHS_MESS_OUT 0x06
186 #define PHS_MESS_IN 0x07
188 /* Command Status Register definitions */
190 /* reset state interrupts */
191 #define CSR_RESET 0x00
192 #define CSR_RESET_AF 0x01
194 /* successful completion interrupts */
195 #define CSR_RESELECT 0x10
196 #define CSR_SELECT 0x11
197 #define CSR_SEL_XFER_DONE 0x16
198 #define CSR_XFER_DONE 0x18
200 /* paused or aborted interrupts */
201 #define CSR_MSGIN 0x20
203 #define CSR_SEL_ABORT 0x22
204 #define CSR_RESEL_ABORT 0x25
205 #define CSR_RESEL_ABORT_AM 0x27
206 #define CSR_ABORT 0x28
208 /* terminated interrupts */
209 #define CSR_INVALID 0x40
210 #define CSR_UNEXP_DISC 0x41
211 #define CSR_TIMEOUT 0x42
212 #define CSR_PARITY 0x43
213 #define CSR_PARITY_ATN 0x44
214 #define CSR_BAD_STATUS 0x45
215 #define CSR_UNEXP 0x48
217 /* service required interrupts */
218 #define CSR_RESEL 0x80
219 #define CSR_RESEL_AM 0x81
220 #define CSR_DISC 0x85
221 #define CSR_SRV_REQ 0x88
223 /* Own ID/CDB Size register */
224 #define OWNID_EAF 0x08
225 #define OWNID_EHP 0x10
226 #define OWNID_RAF 0x20
227 #define OWNID_FS_8 0x00
228 #define OWNID_FS_12 0x40
229 #define OWNID_FS_16 0x80
231 /* Control register */
232 #define CTRL_HSP 0x01
234 #define CTRL_IDI 0x04
235 #define CTRL_EDI 0x08
236 #define CTRL_HHP 0x10
237 #define CTRL_POLLED 0x00
238 #define CTRL_BURST 0x20
239 #define CTRL_BUS 0x40
240 #define CTRL_DMA 0x80
242 /* Timeout Period register */
243 #define TIMEOUT_PERIOD_VALUE 20 /* results in 200 ms. */
245 /* Synchronous Transfer Register */
248 /* Destination ID register */
249 #define DSTID_DPD 0x40
250 #define DATA_OUT_DIR 0
251 #define DATA_IN_DIR 1
252 #define DSTID_SCC 0x80
254 /* Source ID register */
255 #define SRCID_MASK 0x07
256 #define SRCID_SIV 0x08
257 #define SRCID_DSP 0x20
258 #define SRCID_ES 0x40
259 #define SRCID_ER 0x80
263 #define ILLEGAL_STATUS_BYTE 0xff
266 #define DEFAULT_SX_PER 500 /* (ns) fairly safe */
267 #define DEFAULT_SX_OFF 0 /* aka async */
269 #define OPTIMUM_SX_PER 252 /* (ns) best we can do (mult-of-4) */
270 #define OPTIMUM_SX_OFF 12 /* size of in2000 fifo */
273 unsigned int period_ns
;
278 struct IN2000_hostdata
{
279 struct Scsi_Host
*next
;
280 uchar chip
; /* what kind of wd33c93 chip? */
281 uchar microcode
; /* microcode rev if 'B' */
282 unsigned short io_base
; /* IO port base */
283 unsigned int dip_switch
; /* dip switch settings */
284 unsigned int hrev
; /* hardware revision of card */
285 volatile uchar busy
[8]; /* index = target, bit = lun */
286 volatile Scsi_Cmnd
*input_Q
; /* commands waiting to be started */
287 volatile Scsi_Cmnd
*selecting
; /* trying to select this command */
288 volatile Scsi_Cmnd
*connected
; /* currently connected command */
289 volatile Scsi_Cmnd
*disconnected_Q
;/* commands waiting for reconnect */
290 uchar state
; /* what we are currently doing */
291 uchar fifo
; /* what the FIFO is up to */
292 uchar level2
; /* extent to which Level-2 commands are used */
293 uchar disconnect
; /* disconnect/reselect policy */
294 unsigned int args
; /* set from command-line argument */
295 uchar incoming_msg
[8]; /* filled during message_in phase */
296 int incoming_ptr
; /* mainly used with EXTENDED messages */
297 uchar outgoing_msg
[8]; /* send this during next message_out */
298 int outgoing_len
; /* length of outgoing message */
299 unsigned int default_sx_per
; /* default transfer period for SCSI bus */
300 uchar sync_xfer
[8]; /* sync_xfer reg settings per target */
301 uchar sync_stat
[8]; /* status of sync negotiation per target */
302 uchar sync_off
; /* bit mask: don't use sync with these targets */
303 #ifdef PROC_INTERFACE
304 uchar proc
; /* bit mask: what's in proc output */
305 #ifdef PROC_STATISTICS
306 unsigned long cmd_cnt
[8]; /* # of commands issued per target */
307 unsigned long int_cnt
; /* # of interrupts serviced */
308 unsigned long disc_allowed_cnt
[8]; /* # of disconnects allowed per target */
309 unsigned long disc_done_cnt
[8]; /* # of disconnects done per target*/
315 /* defines for hostdata->chip */
320 #define C_UNKNOWN_CHIP 100
322 /* defines for hostdata->state */
324 #define S_UNCONNECTED 0
325 #define S_SELECTING 1
326 #define S_RUNNING_LEVEL2 2
327 #define S_CONNECTED 3
328 #define S_PRE_TMP_DISC 4
329 #define S_PRE_CMP_DISC 5
331 /* defines for hostdata->fifo */
333 #define FI_FIFO_UNUSED 0
334 #define FI_FIFO_READING 1
335 #define FI_FIFO_WRITING 2
337 /* defines for hostdata->level2 */
338 /* NOTE: only the first 3 are trustworthy at this point -
339 * having trouble when more than 1 device is reading/writing
340 * at the same time...
343 #define L2_NONE 0 /* no combination commands - we get lots of ints */
344 #define L2_SELECT 1 /* start with SEL_ATN_XFER, but never resume it */
345 #define L2_BASIC 2 /* resume after STATUS ints & RDP messages */
346 #define L2_DATA 3 /* resume after DATA_IN/OUT ints */
347 #define L2_MOST 4 /* resume after anything except a RESELECT int */
348 #define L2_RESELECT 5 /* resume after everything, including RESELECT ints */
349 #define L2_ALL 6 /* always resume */
351 /* defines for hostdata->disconnect */
354 #define DIS_ADAPTIVE 1
357 /* defines for hostdata->args */
361 #define DB_QUEUE_COMMAND 1<<2
362 #define DB_EXECUTE 1<<3
364 #define DB_TRANSFER 1<<5
367 #define A_NO_SCSI_RESET 1<<15
370 /* defines for hostdata->sync_xfer[] */
377 /* defines for hostdata->proc */
379 #define PR_VERSION 1<<0
381 #define PR_STATISTICS 1<<2
382 #define PR_CONNECTED 1<<3
383 #define PR_INPUTQ 1<<4
384 #define PR_DISCQ 1<<5
389 # include <linux/init.h>
390 # include <linux/spinlock.h>
391 # define in2000__INITFUNC(function) __initfunc(function)
392 # define in2000__INIT __init
393 # define in2000__INITDATA __initdata
394 # define CLISPIN_LOCK(host,flags) spin_lock_irqsave(host->host_lock, flags)
395 # define CLISPIN_UNLOCK(host,flags) spin_unlock_irqrestore(host->host_lock, \
398 static int in2000_detect(struct scsi_host_template
*) in2000__INIT
;
399 static int in2000_queuecommand(struct Scsi_Host
*, struct scsi_cmnd
*);
400 static int in2000_abort(Scsi_Cmnd
*);
401 static void in2000_setup(char *, int *) in2000__INIT
;
402 static int in2000_biosparam(struct scsi_device
*, struct block_device
*,
404 static int in2000_bus_reset(Scsi_Cmnd
*);
407 #define IN2000_CAN_Q 16
408 #define IN2000_SG SG_ALL
410 #define IN2000_HOST_ID 7
412 #endif /* IN2000_H */
This page took 0.038884 seconds and 5 git commands to generate.