2 * ipr.c -- driver for IBM Power Linux RAID adapters
4 * Written By: Brian King <brking@us.ibm.com>, IBM Corporation
6 * Copyright (C) 2003, 2004 IBM Corporation
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
27 * This driver is used to control the following SCSI adapters:
29 * IBM iSeries: 5702, 5703, 2780, 5709, 570A, 570B
31 * IBM pSeries: PCI-X Dual Channel Ultra 320 SCSI RAID Adapter
32 * PCI-X Dual Channel Ultra 320 SCSI Adapter
33 * PCI-X Dual Channel Ultra 320 SCSI RAID Enablement Card
34 * Embedded SCSI adapter on p615 and p655 systems
36 * Supported Hardware Features:
37 * - Ultra 320 SCSI controller
38 * - PCI-X host interface
39 * - Embedded PowerPC RISC Processor and Hardware XOR DMA Engine
40 * - Non-Volatile Write Cache
41 * - Supports attachment of non-RAID disks, tape, and optical devices
42 * - RAID Levels 0, 5, 10
44 * - Background Parity Checking
45 * - Background Data Scrubbing
46 * - Ability to increase the capacity of an existing RAID 5 disk array
50 * - Tagged command queuing
51 * - Adapter microcode download
53 * - SCSI device hot plug
58 #include <linux/init.h>
59 #include <linux/types.h>
60 #include <linux/errno.h>
61 #include <linux/kernel.h>
62 #include <linux/ioport.h>
63 #include <linux/delay.h>
64 #include <linux/pci.h>
65 #include <linux/wait.h>
66 #include <linux/spinlock.h>
67 #include <linux/sched.h>
68 #include <linux/interrupt.h>
69 #include <linux/blkdev.h>
70 #include <linux/firmware.h>
71 #include <linux/module.h>
72 #include <linux/moduleparam.h>
73 #include <linux/libata.h>
74 #include <linux/hdreg.h>
77 #include <asm/processor.h>
78 #include <scsi/scsi.h>
79 #include <scsi/scsi_host.h>
80 #include <scsi/scsi_tcq.h>
81 #include <scsi/scsi_eh.h>
82 #include <scsi/scsi_cmnd.h>
88 static LIST_HEAD(ipr_ioa_head
);
89 static unsigned int ipr_log_level
= IPR_DEFAULT_LOG_LEVEL
;
90 static unsigned int ipr_max_speed
= 1;
91 static int ipr_testmode
= 0;
92 static unsigned int ipr_fastfail
= 0;
93 static unsigned int ipr_transop_timeout
= 0;
94 static unsigned int ipr_enable_cache
= 1;
95 static unsigned int ipr_debug
= 0;
96 static unsigned int ipr_dual_ioa_raid
= 1;
97 static DEFINE_SPINLOCK(ipr_driver_lock
);
99 /* This table describes the differences between DMA controller chips */
100 static const struct ipr_chip_cfg_t ipr_chip_cfg
[] = {
101 { /* Gemstone, Citrine, Obsidian, and Obsidian-E */
103 .cache_line_size
= 0x20,
105 .set_interrupt_mask_reg
= 0x0022C,
106 .clr_interrupt_mask_reg
= 0x00230,
107 .sense_interrupt_mask_reg
= 0x0022C,
108 .clr_interrupt_reg
= 0x00228,
109 .sense_interrupt_reg
= 0x00224,
110 .ioarrin_reg
= 0x00404,
111 .sense_uproc_interrupt_reg
= 0x00214,
112 .set_uproc_interrupt_reg
= 0x00214,
113 .clr_uproc_interrupt_reg
= 0x00218
116 { /* Snipe and Scamp */
118 .cache_line_size
= 0x20,
120 .set_interrupt_mask_reg
= 0x00288,
121 .clr_interrupt_mask_reg
= 0x0028C,
122 .sense_interrupt_mask_reg
= 0x00288,
123 .clr_interrupt_reg
= 0x00284,
124 .sense_interrupt_reg
= 0x00280,
125 .ioarrin_reg
= 0x00504,
126 .sense_uproc_interrupt_reg
= 0x00290,
127 .set_uproc_interrupt_reg
= 0x00290,
128 .clr_uproc_interrupt_reg
= 0x00294
133 static const struct ipr_chip_t ipr_chip
[] = {
134 { PCI_VENDOR_ID_MYLEX
, PCI_DEVICE_ID_IBM_GEMSTONE
, &ipr_chip_cfg
[0] },
135 { PCI_VENDOR_ID_IBM
, PCI_DEVICE_ID_IBM_CITRINE
, &ipr_chip_cfg
[0] },
136 { PCI_VENDOR_ID_ADAPTEC2
, PCI_DEVICE_ID_ADAPTEC2_OBSIDIAN
, &ipr_chip_cfg
[0] },
137 { PCI_VENDOR_ID_IBM
, PCI_DEVICE_ID_IBM_OBSIDIAN
, &ipr_chip_cfg
[0] },
138 { PCI_VENDOR_ID_IBM
, PCI_DEVICE_ID_IBM_OBSIDIAN_E
, &ipr_chip_cfg
[0] },
139 { PCI_VENDOR_ID_IBM
, PCI_DEVICE_ID_IBM_SNIPE
, &ipr_chip_cfg
[1] },
140 { PCI_VENDOR_ID_ADAPTEC2
, PCI_DEVICE_ID_ADAPTEC2_SCAMP
, &ipr_chip_cfg
[1] }
143 static int ipr_max_bus_speeds
[] = {
144 IPR_80MBs_SCSI_RATE
, IPR_U160_SCSI_RATE
, IPR_U320_SCSI_RATE
147 MODULE_AUTHOR("Brian King <brking@us.ibm.com>");
148 MODULE_DESCRIPTION("IBM Power RAID SCSI Adapter Driver");
149 module_param_named(max_speed
, ipr_max_speed
, uint
, 0);
150 MODULE_PARM_DESC(max_speed
, "Maximum bus speed (0-2). Default: 1=U160. Speeds: 0=80 MB/s, 1=U160, 2=U320");
151 module_param_named(log_level
, ipr_log_level
, uint
, 0);
152 MODULE_PARM_DESC(log_level
, "Set to 0 - 4 for increasing verbosity of device driver");
153 module_param_named(testmode
, ipr_testmode
, int, 0);
154 MODULE_PARM_DESC(testmode
, "DANGEROUS!!! Allows unsupported configurations");
155 module_param_named(fastfail
, ipr_fastfail
, int, S_IRUGO
| S_IWUSR
);
156 MODULE_PARM_DESC(fastfail
, "Reduce timeouts and retries");
157 module_param_named(transop_timeout
, ipr_transop_timeout
, int, 0);
158 MODULE_PARM_DESC(transop_timeout
, "Time in seconds to wait for adapter to come operational (default: 300)");
159 module_param_named(enable_cache
, ipr_enable_cache
, int, 0);
160 MODULE_PARM_DESC(enable_cache
, "Enable adapter's non-volatile write cache (default: 1)");
161 module_param_named(debug
, ipr_debug
, int, S_IRUGO
| S_IWUSR
);
162 MODULE_PARM_DESC(debug
, "Enable device driver debugging logging. Set to 1 to enable. (default: 0)");
163 module_param_named(dual_ioa_raid
, ipr_dual_ioa_raid
, int, 0);
164 MODULE_PARM_DESC(dual_ioa_raid
, "Enable dual adapter RAID support. Set to 1 to enable. (default: 1)");
165 MODULE_LICENSE("GPL");
166 MODULE_VERSION(IPR_DRIVER_VERSION
);
168 /* A constant array of IOASCs/URCs/Error Messages */
170 struct ipr_error_table_t ipr_error_table
[] = {
171 {0x00000000, 1, IPR_DEFAULT_LOG_LEVEL
,
172 "8155: An unknown error was received"},
174 "Soft underlength error"},
176 "Command to be cancelled not found"},
178 "Qualified success"},
179 {0x01080000, 1, IPR_DEFAULT_LOG_LEVEL
,
180 "FFFE: Soft device bus error recovered by the IOA"},
181 {0x01088100, 0, IPR_DEFAULT_LOG_LEVEL
,
182 "4101: Soft device bus fabric error"},
183 {0x01170600, 0, IPR_DEFAULT_LOG_LEVEL
,
184 "FFF9: Device sector reassign successful"},
185 {0x01170900, 0, IPR_DEFAULT_LOG_LEVEL
,
186 "FFF7: Media error recovered by device rewrite procedures"},
187 {0x01180200, 0, IPR_DEFAULT_LOG_LEVEL
,
188 "7001: IOA sector reassignment successful"},
189 {0x01180500, 0, IPR_DEFAULT_LOG_LEVEL
,
190 "FFF9: Soft media error. Sector reassignment recommended"},
191 {0x01180600, 0, IPR_DEFAULT_LOG_LEVEL
,
192 "FFF7: Media error recovered by IOA rewrite procedures"},
193 {0x01418000, 0, IPR_DEFAULT_LOG_LEVEL
,
194 "FF3D: Soft PCI bus error recovered by the IOA"},
195 {0x01440000, 1, IPR_DEFAULT_LOG_LEVEL
,
196 "FFF6: Device hardware error recovered by the IOA"},
197 {0x01448100, 0, IPR_DEFAULT_LOG_LEVEL
,
198 "FFF6: Device hardware error recovered by the device"},
199 {0x01448200, 1, IPR_DEFAULT_LOG_LEVEL
,
200 "FF3D: Soft IOA error recovered by the IOA"},
201 {0x01448300, 0, IPR_DEFAULT_LOG_LEVEL
,
202 "FFFA: Undefined device response recovered by the IOA"},
203 {0x014A0000, 1, IPR_DEFAULT_LOG_LEVEL
,
204 "FFF6: Device bus error, message or command phase"},
205 {0x014A8000, 0, IPR_DEFAULT_LOG_LEVEL
,
206 "FFFE: Task Management Function failed"},
207 {0x015D0000, 0, IPR_DEFAULT_LOG_LEVEL
,
208 "FFF6: Failure prediction threshold exceeded"},
209 {0x015D9200, 0, IPR_DEFAULT_LOG_LEVEL
,
210 "8009: Impending cache battery pack failure"},
212 "34FF: Disk device format in progress"},
213 {0x02048000, 0, IPR_DEFAULT_LOG_LEVEL
,
214 "9070: IOA requested reset"},
216 "Synchronization required"},
218 "No ready, IOA shutdown"},
220 "Not ready, IOA has been shutdown"},
221 {0x02670100, 0, IPR_DEFAULT_LOG_LEVEL
,
222 "3020: Storage subsystem configuration error"},
224 "FFF5: Medium error, data unreadable, recommend reassign"},
226 "7000: Medium error, data unreadable, do not reassign"},
227 {0x03310000, 0, IPR_DEFAULT_LOG_LEVEL
,
228 "FFF3: Disk media format bad"},
229 {0x04050000, 0, IPR_DEFAULT_LOG_LEVEL
,
230 "3002: Addressed device failed to respond to selection"},
231 {0x04080000, 1, IPR_DEFAULT_LOG_LEVEL
,
232 "3100: Device bus error"},
233 {0x04080100, 0, IPR_DEFAULT_LOG_LEVEL
,
234 "3109: IOA timed out a device command"},
236 "3120: SCSI bus is not operational"},
237 {0x04088100, 0, IPR_DEFAULT_LOG_LEVEL
,
238 "4100: Hard device bus fabric error"},
239 {0x04118000, 0, IPR_DEFAULT_LOG_LEVEL
,
240 "9000: IOA reserved area data check"},
241 {0x04118100, 0, IPR_DEFAULT_LOG_LEVEL
,
242 "9001: IOA reserved area invalid data pattern"},
243 {0x04118200, 0, IPR_DEFAULT_LOG_LEVEL
,
244 "9002: IOA reserved area LRC error"},
245 {0x04320000, 0, IPR_DEFAULT_LOG_LEVEL
,
246 "102E: Out of alternate sectors for disk storage"},
247 {0x04330000, 1, IPR_DEFAULT_LOG_LEVEL
,
248 "FFF4: Data transfer underlength error"},
249 {0x04338000, 1, IPR_DEFAULT_LOG_LEVEL
,
250 "FFF4: Data transfer overlength error"},
251 {0x043E0100, 0, IPR_DEFAULT_LOG_LEVEL
,
252 "3400: Logical unit failure"},
253 {0x04408500, 0, IPR_DEFAULT_LOG_LEVEL
,
254 "FFF4: Device microcode is corrupt"},
255 {0x04418000, 1, IPR_DEFAULT_LOG_LEVEL
,
256 "8150: PCI bus error"},
258 "Unsupported device bus message received"},
259 {0x04440000, 1, IPR_DEFAULT_LOG_LEVEL
,
260 "FFF4: Disk device problem"},
261 {0x04448200, 1, IPR_DEFAULT_LOG_LEVEL
,
262 "8150: Permanent IOA failure"},
263 {0x04448300, 0, IPR_DEFAULT_LOG_LEVEL
,
264 "3010: Disk device returned wrong response to IOA"},
265 {0x04448400, 0, IPR_DEFAULT_LOG_LEVEL
,
266 "8151: IOA microcode error"},
268 "Device bus status error"},
269 {0x04448600, 0, IPR_DEFAULT_LOG_LEVEL
,
270 "8157: IOA error requiring IOA reset to recover"},
272 "ATA device status error"},
274 "Message reject received from the device"},
275 {0x04449200, 0, IPR_DEFAULT_LOG_LEVEL
,
276 "8008: A permanent cache battery pack failure occurred"},
277 {0x0444A000, 0, IPR_DEFAULT_LOG_LEVEL
,
278 "9090: Disk unit has been modified after the last known status"},
279 {0x0444A200, 0, IPR_DEFAULT_LOG_LEVEL
,
280 "9081: IOA detected device error"},
281 {0x0444A300, 0, IPR_DEFAULT_LOG_LEVEL
,
282 "9082: IOA detected device error"},
283 {0x044A0000, 1, IPR_DEFAULT_LOG_LEVEL
,
284 "3110: Device bus error, message or command phase"},
285 {0x044A8000, 1, IPR_DEFAULT_LOG_LEVEL
,
286 "3110: SAS Command / Task Management Function failed"},
287 {0x04670400, 0, IPR_DEFAULT_LOG_LEVEL
,
288 "9091: Incorrect hardware configuration change has been detected"},
289 {0x04678000, 0, IPR_DEFAULT_LOG_LEVEL
,
290 "9073: Invalid multi-adapter configuration"},
291 {0x04678100, 0, IPR_DEFAULT_LOG_LEVEL
,
292 "4010: Incorrect connection between cascaded expanders"},
293 {0x04678200, 0, IPR_DEFAULT_LOG_LEVEL
,
294 "4020: Connections exceed IOA design limits"},
295 {0x04678300, 0, IPR_DEFAULT_LOG_LEVEL
,
296 "4030: Incorrect multipath connection"},
297 {0x04679000, 0, IPR_DEFAULT_LOG_LEVEL
,
298 "4110: Unsupported enclosure function"},
299 {0x046E0000, 0, IPR_DEFAULT_LOG_LEVEL
,
300 "FFF4: Command to logical unit failed"},
302 "Illegal request, invalid request type or request packet"},
304 "Illegal request, invalid resource handle"},
306 "Illegal request, commands not allowed to this device"},
308 "Illegal request, command not allowed to a secondary adapter"},
310 "Illegal request, invalid field in parameter list"},
312 "Illegal request, parameter not supported"},
314 "Illegal request, parameter value invalid"},
316 "Illegal request, command sequence error"},
318 "Illegal request, dual adapter support not enabled"},
319 {0x06040500, 0, IPR_DEFAULT_LOG_LEVEL
,
320 "9031: Array protection temporarily suspended, protection resuming"},
321 {0x06040600, 0, IPR_DEFAULT_LOG_LEVEL
,
322 "9040: Array protection temporarily suspended, protection resuming"},
323 {0x06288000, 0, IPR_DEFAULT_LOG_LEVEL
,
324 "3140: Device bus not ready to ready transition"},
325 {0x06290000, 0, IPR_DEFAULT_LOG_LEVEL
,
326 "FFFB: SCSI bus was reset"},
328 "FFFE: SCSI bus transition to single ended"},
330 "FFFE: SCSI bus transition to LVD"},
331 {0x06298000, 0, IPR_DEFAULT_LOG_LEVEL
,
332 "FFFB: SCSI bus was reset by another initiator"},
333 {0x063F0300, 0, IPR_DEFAULT_LOG_LEVEL
,
334 "3029: A device replacement has occurred"},
335 {0x064C8000, 0, IPR_DEFAULT_LOG_LEVEL
,
336 "9051: IOA cache data exists for a missing or failed device"},
337 {0x064C8100, 0, IPR_DEFAULT_LOG_LEVEL
,
338 "9055: Auxiliary cache IOA contains cache data needed by the primary IOA"},
339 {0x06670100, 0, IPR_DEFAULT_LOG_LEVEL
,
340 "9025: Disk unit is not supported at its physical location"},
341 {0x06670600, 0, IPR_DEFAULT_LOG_LEVEL
,
342 "3020: IOA detected a SCSI bus configuration error"},
343 {0x06678000, 0, IPR_DEFAULT_LOG_LEVEL
,
344 "3150: SCSI bus configuration error"},
345 {0x06678100, 0, IPR_DEFAULT_LOG_LEVEL
,
346 "9074: Asymmetric advanced function disk configuration"},
347 {0x06678300, 0, IPR_DEFAULT_LOG_LEVEL
,
348 "4040: Incomplete multipath connection between IOA and enclosure"},
349 {0x06678400, 0, IPR_DEFAULT_LOG_LEVEL
,
350 "4041: Incomplete multipath connection between enclosure and device"},
351 {0x06678500, 0, IPR_DEFAULT_LOG_LEVEL
,
352 "9075: Incomplete multipath connection between IOA and remote IOA"},
353 {0x06678600, 0, IPR_DEFAULT_LOG_LEVEL
,
354 "9076: Configuration error, missing remote IOA"},
355 {0x06679100, 0, IPR_DEFAULT_LOG_LEVEL
,
356 "4050: Enclosure does not support a required multipath function"},
357 {0x06690000, 0, IPR_DEFAULT_LOG_LEVEL
,
358 "4070: Logically bad block written on device"},
359 {0x06690200, 0, IPR_DEFAULT_LOG_LEVEL
,
360 "9041: Array protection temporarily suspended"},
361 {0x06698200, 0, IPR_DEFAULT_LOG_LEVEL
,
362 "9042: Corrupt array parity detected on specified device"},
363 {0x066B0200, 0, IPR_DEFAULT_LOG_LEVEL
,
364 "9030: Array no longer protected due to missing or failed disk unit"},
365 {0x066B8000, 0, IPR_DEFAULT_LOG_LEVEL
,
366 "9071: Link operational transition"},
367 {0x066B8100, 0, IPR_DEFAULT_LOG_LEVEL
,
368 "9072: Link not operational transition"},
369 {0x066B8200, 0, IPR_DEFAULT_LOG_LEVEL
,
370 "9032: Array exposed but still protected"},
371 {0x066B8300, 0, IPR_DEFAULT_LOG_LEVEL
+ 1,
372 "70DD: Device forced failed by disrupt device command"},
373 {0x066B9100, 0, IPR_DEFAULT_LOG_LEVEL
,
374 "4061: Multipath redundancy level got better"},
375 {0x066B9200, 0, IPR_DEFAULT_LOG_LEVEL
,
376 "4060: Multipath redundancy level got worse"},
378 "Failure due to other device"},
379 {0x07278000, 0, IPR_DEFAULT_LOG_LEVEL
,
380 "9008: IOA does not support functions expected by devices"},
381 {0x07278100, 0, IPR_DEFAULT_LOG_LEVEL
,
382 "9010: Cache data associated with attached devices cannot be found"},
383 {0x07278200, 0, IPR_DEFAULT_LOG_LEVEL
,
384 "9011: Cache data belongs to devices other than those attached"},
385 {0x07278400, 0, IPR_DEFAULT_LOG_LEVEL
,
386 "9020: Array missing 2 or more devices with only 1 device present"},
387 {0x07278500, 0, IPR_DEFAULT_LOG_LEVEL
,
388 "9021: Array missing 2 or more devices with 2 or more devices present"},
389 {0x07278600, 0, IPR_DEFAULT_LOG_LEVEL
,
390 "9022: Exposed array is missing a required device"},
391 {0x07278700, 0, IPR_DEFAULT_LOG_LEVEL
,
392 "9023: Array member(s) not at required physical locations"},
393 {0x07278800, 0, IPR_DEFAULT_LOG_LEVEL
,
394 "9024: Array not functional due to present hardware configuration"},
395 {0x07278900, 0, IPR_DEFAULT_LOG_LEVEL
,
396 "9026: Array not functional due to present hardware configuration"},
397 {0x07278A00, 0, IPR_DEFAULT_LOG_LEVEL
,
398 "9027: Array is missing a device and parity is out of sync"},
399 {0x07278B00, 0, IPR_DEFAULT_LOG_LEVEL
,
400 "9028: Maximum number of arrays already exist"},
401 {0x07278C00, 0, IPR_DEFAULT_LOG_LEVEL
,
402 "9050: Required cache data cannot be located for a disk unit"},
403 {0x07278D00, 0, IPR_DEFAULT_LOG_LEVEL
,
404 "9052: Cache data exists for a device that has been modified"},
405 {0x07278F00, 0, IPR_DEFAULT_LOG_LEVEL
,
406 "9054: IOA resources not available due to previous problems"},
407 {0x07279100, 0, IPR_DEFAULT_LOG_LEVEL
,
408 "9092: Disk unit requires initialization before use"},
409 {0x07279200, 0, IPR_DEFAULT_LOG_LEVEL
,
410 "9029: Incorrect hardware configuration change has been detected"},
411 {0x07279600, 0, IPR_DEFAULT_LOG_LEVEL
,
412 "9060: One or more disk pairs are missing from an array"},
413 {0x07279700, 0, IPR_DEFAULT_LOG_LEVEL
,
414 "9061: One or more disks are missing from an array"},
415 {0x07279800, 0, IPR_DEFAULT_LOG_LEVEL
,
416 "9062: One or more disks are missing from an array"},
417 {0x07279900, 0, IPR_DEFAULT_LOG_LEVEL
,
418 "9063: Maximum number of functional arrays has been exceeded"},
420 "Aborted command, invalid descriptor"},
422 "Command terminated by host"}
425 static const struct ipr_ses_table_entry ipr_ses_table
[] = {
426 { "2104-DL1 ", "XXXXXXXXXXXXXXXX", 80 },
427 { "2104-TL1 ", "XXXXXXXXXXXXXXXX", 80 },
428 { "HSBP07M P U2SCSI", "XXXXXXXXXXXXXXXX", 80 }, /* Hidive 7 slot */
429 { "HSBP05M P U2SCSI", "XXXXXXXXXXXXXXXX", 80 }, /* Hidive 5 slot */
430 { "HSBP05M S U2SCSI", "XXXXXXXXXXXXXXXX", 80 }, /* Bowtie */
431 { "HSBP06E ASU2SCSI", "XXXXXXXXXXXXXXXX", 80 }, /* MartinFenning */
432 { "2104-DU3 ", "XXXXXXXXXXXXXXXX", 160 },
433 { "2104-TU3 ", "XXXXXXXXXXXXXXXX", 160 },
434 { "HSBP04C RSU2SCSI", "XXXXXXX*XXXXXXXX", 160 },
435 { "HSBP06E RSU2SCSI", "XXXXXXX*XXXXXXXX", 160 },
436 { "St V1S2 ", "XXXXXXXXXXXXXXXX", 160 },
437 { "HSBPD4M PU3SCSI", "XXXXXXX*XXXXXXXX", 160 },
438 { "VSBPD1H U3SCSI", "XXXXXXX*XXXXXXXX", 160 }
442 * Function Prototypes
444 static int ipr_reset_alert(struct ipr_cmnd
*);
445 static void ipr_process_ccn(struct ipr_cmnd
*);
446 static void ipr_process_error(struct ipr_cmnd
*);
447 static void ipr_reset_ioa_job(struct ipr_cmnd
*);
448 static void ipr_initiate_ioa_reset(struct ipr_ioa_cfg
*,
449 enum ipr_shutdown_type
);
451 #ifdef CONFIG_SCSI_IPR_TRACE
453 * ipr_trc_hook - Add a trace entry to the driver trace
454 * @ipr_cmd: ipr command struct
456 * @add_data: additional data
461 static void ipr_trc_hook(struct ipr_cmnd
*ipr_cmd
,
462 u8 type
, u32 add_data
)
464 struct ipr_trace_entry
*trace_entry
;
465 struct ipr_ioa_cfg
*ioa_cfg
= ipr_cmd
->ioa_cfg
;
467 trace_entry
= &ioa_cfg
->trace
[ioa_cfg
->trace_index
++];
468 trace_entry
->time
= jiffies
;
469 trace_entry
->op_code
= ipr_cmd
->ioarcb
.cmd_pkt
.cdb
[0];
470 trace_entry
->type
= type
;
471 trace_entry
->ata_op_code
= ipr_cmd
->ioarcb
.add_data
.u
.regs
.command
;
472 trace_entry
->cmd_index
= ipr_cmd
->cmd_index
& 0xff;
473 trace_entry
->res_handle
= ipr_cmd
->ioarcb
.res_handle
;
474 trace_entry
->u
.add_data
= add_data
;
477 #define ipr_trc_hook(ipr_cmd, type, add_data) do { } while(0)
481 * ipr_reinit_ipr_cmnd - Re-initialize an IPR Cmnd block for reuse
482 * @ipr_cmd: ipr command struct
487 static void ipr_reinit_ipr_cmnd(struct ipr_cmnd
*ipr_cmd
)
489 struct ipr_ioarcb
*ioarcb
= &ipr_cmd
->ioarcb
;
490 struct ipr_ioasa
*ioasa
= &ipr_cmd
->ioasa
;
491 dma_addr_t dma_addr
= be32_to_cpu(ioarcb
->ioarcb_host_pci_addr
);
493 memset(&ioarcb
->cmd_pkt
, 0, sizeof(struct ipr_cmd_pkt
));
494 ioarcb
->write_data_transfer_length
= 0;
495 ioarcb
->read_data_transfer_length
= 0;
496 ioarcb
->write_ioadl_len
= 0;
497 ioarcb
->read_ioadl_len
= 0;
498 ioarcb
->write_ioadl_addr
=
499 cpu_to_be32(dma_addr
+ offsetof(struct ipr_cmnd
, ioadl
));
500 ioarcb
->read_ioadl_addr
= ioarcb
->write_ioadl_addr
;
502 ioasa
->residual_data_len
= 0;
503 ioasa
->u
.gata
.status
= 0;
505 ipr_cmd
->scsi_cmd
= NULL
;
507 ipr_cmd
->sense_buffer
[0] = 0;
508 ipr_cmd
->dma_use_sg
= 0;
512 * ipr_init_ipr_cmnd - Initialize an IPR Cmnd block
513 * @ipr_cmd: ipr command struct
518 static void ipr_init_ipr_cmnd(struct ipr_cmnd
*ipr_cmd
)
520 ipr_reinit_ipr_cmnd(ipr_cmd
);
521 ipr_cmd
->u
.scratch
= 0;
522 ipr_cmd
->sibling
= NULL
;
523 init_timer(&ipr_cmd
->timer
);
527 * ipr_get_free_ipr_cmnd - Get a free IPR Cmnd block
528 * @ioa_cfg: ioa config struct
531 * pointer to ipr command struct
534 struct ipr_cmnd
*ipr_get_free_ipr_cmnd(struct ipr_ioa_cfg
*ioa_cfg
)
536 struct ipr_cmnd
*ipr_cmd
;
538 ipr_cmd
= list_entry(ioa_cfg
->free_q
.next
, struct ipr_cmnd
, queue
);
539 list_del(&ipr_cmd
->queue
);
540 ipr_init_ipr_cmnd(ipr_cmd
);
546 * ipr_mask_and_clear_interrupts - Mask all and clear specified interrupts
547 * @ioa_cfg: ioa config struct
548 * @clr_ints: interrupts to clear
550 * This function masks all interrupts on the adapter, then clears the
551 * interrupts specified in the mask
556 static void ipr_mask_and_clear_interrupts(struct ipr_ioa_cfg
*ioa_cfg
,
559 volatile u32 int_reg
;
561 /* Stop new interrupts */
562 ioa_cfg
->allow_interrupts
= 0;
564 /* Set interrupt mask to stop all new interrupts */
565 writel(~0, ioa_cfg
->regs
.set_interrupt_mask_reg
);
567 /* Clear any pending interrupts */
568 writel(clr_ints
, ioa_cfg
->regs
.clr_interrupt_reg
);
569 int_reg
= readl(ioa_cfg
->regs
.sense_interrupt_reg
);
573 * ipr_save_pcix_cmd_reg - Save PCI-X command register
574 * @ioa_cfg: ioa config struct
577 * 0 on success / -EIO on failure
579 static int ipr_save_pcix_cmd_reg(struct ipr_ioa_cfg
*ioa_cfg
)
581 int pcix_cmd_reg
= pci_find_capability(ioa_cfg
->pdev
, PCI_CAP_ID_PCIX
);
583 if (pcix_cmd_reg
== 0)
586 if (pci_read_config_word(ioa_cfg
->pdev
, pcix_cmd_reg
+ PCI_X_CMD
,
587 &ioa_cfg
->saved_pcix_cmd_reg
) != PCIBIOS_SUCCESSFUL
) {
588 dev_err(&ioa_cfg
->pdev
->dev
, "Failed to save PCI-X command register\n");
592 ioa_cfg
->saved_pcix_cmd_reg
|= PCI_X_CMD_DPERR_E
| PCI_X_CMD_ERO
;
597 * ipr_set_pcix_cmd_reg - Setup PCI-X command register
598 * @ioa_cfg: ioa config struct
601 * 0 on success / -EIO on failure
603 static int ipr_set_pcix_cmd_reg(struct ipr_ioa_cfg
*ioa_cfg
)
605 int pcix_cmd_reg
= pci_find_capability(ioa_cfg
->pdev
, PCI_CAP_ID_PCIX
);
608 if (pci_write_config_word(ioa_cfg
->pdev
, pcix_cmd_reg
+ PCI_X_CMD
,
609 ioa_cfg
->saved_pcix_cmd_reg
) != PCIBIOS_SUCCESSFUL
) {
610 dev_err(&ioa_cfg
->pdev
->dev
, "Failed to setup PCI-X command register\n");
619 * ipr_sata_eh_done - done function for aborted SATA commands
620 * @ipr_cmd: ipr command struct
622 * This function is invoked for ops generated to SATA
623 * devices which are being aborted.
628 static void ipr_sata_eh_done(struct ipr_cmnd
*ipr_cmd
)
630 struct ipr_ioa_cfg
*ioa_cfg
= ipr_cmd
->ioa_cfg
;
631 struct ata_queued_cmd
*qc
= ipr_cmd
->qc
;
632 struct ipr_sata_port
*sata_port
= qc
->ap
->private_data
;
634 qc
->err_mask
|= AC_ERR_OTHER
;
635 sata_port
->ioasa
.status
|= ATA_BUSY
;
636 list_add_tail(&ipr_cmd
->queue
, &ioa_cfg
->free_q
);
641 * ipr_scsi_eh_done - mid-layer done function for aborted ops
642 * @ipr_cmd: ipr command struct
644 * This function is invoked by the interrupt handler for
645 * ops generated by the SCSI mid-layer which are being aborted.
650 static void ipr_scsi_eh_done(struct ipr_cmnd
*ipr_cmd
)
652 struct ipr_ioa_cfg
*ioa_cfg
= ipr_cmd
->ioa_cfg
;
653 struct scsi_cmnd
*scsi_cmd
= ipr_cmd
->scsi_cmd
;
655 scsi_cmd
->result
|= (DID_ERROR
<< 16);
657 scsi_dma_unmap(ipr_cmd
->scsi_cmd
);
658 scsi_cmd
->scsi_done(scsi_cmd
);
659 list_add_tail(&ipr_cmd
->queue
, &ioa_cfg
->free_q
);
663 * ipr_fail_all_ops - Fails all outstanding ops.
664 * @ioa_cfg: ioa config struct
666 * This function fails all outstanding ops.
671 static void ipr_fail_all_ops(struct ipr_ioa_cfg
*ioa_cfg
)
673 struct ipr_cmnd
*ipr_cmd
, *temp
;
676 list_for_each_entry_safe(ipr_cmd
, temp
, &ioa_cfg
->pending_q
, queue
) {
677 list_del(&ipr_cmd
->queue
);
679 ipr_cmd
->ioasa
.ioasc
= cpu_to_be32(IPR_IOASC_IOA_WAS_RESET
);
680 ipr_cmd
->ioasa
.ilid
= cpu_to_be32(IPR_DRIVER_ILID
);
682 if (ipr_cmd
->scsi_cmd
)
683 ipr_cmd
->done
= ipr_scsi_eh_done
;
684 else if (ipr_cmd
->qc
)
685 ipr_cmd
->done
= ipr_sata_eh_done
;
687 ipr_trc_hook(ipr_cmd
, IPR_TRACE_FINISH
, IPR_IOASC_IOA_WAS_RESET
);
688 del_timer(&ipr_cmd
->timer
);
689 ipr_cmd
->done(ipr_cmd
);
696 * ipr_do_req - Send driver initiated requests.
697 * @ipr_cmd: ipr command struct
698 * @done: done function
699 * @timeout_func: timeout function
700 * @timeout: timeout value
702 * This function sends the specified command to the adapter with the
703 * timeout given. The done function is invoked on command completion.
708 static void ipr_do_req(struct ipr_cmnd
*ipr_cmd
,
709 void (*done
) (struct ipr_cmnd
*),
710 void (*timeout_func
) (struct ipr_cmnd
*), u32 timeout
)
712 struct ipr_ioa_cfg
*ioa_cfg
= ipr_cmd
->ioa_cfg
;
714 list_add_tail(&ipr_cmd
->queue
, &ioa_cfg
->pending_q
);
716 ipr_cmd
->done
= done
;
718 ipr_cmd
->timer
.data
= (unsigned long) ipr_cmd
;
719 ipr_cmd
->timer
.expires
= jiffies
+ timeout
;
720 ipr_cmd
->timer
.function
= (void (*)(unsigned long))timeout_func
;
722 add_timer(&ipr_cmd
->timer
);
724 ipr_trc_hook(ipr_cmd
, IPR_TRACE_START
, 0);
727 writel(be32_to_cpu(ipr_cmd
->ioarcb
.ioarcb_host_pci_addr
),
728 ioa_cfg
->regs
.ioarrin_reg
);
732 * ipr_internal_cmd_done - Op done function for an internally generated op.
733 * @ipr_cmd: ipr command struct
735 * This function is the op done function for an internally generated,
736 * blocking op. It simply wakes the sleeping thread.
741 static void ipr_internal_cmd_done(struct ipr_cmnd
*ipr_cmd
)
743 if (ipr_cmd
->sibling
)
744 ipr_cmd
->sibling
= NULL
;
746 complete(&ipr_cmd
->completion
);
750 * ipr_send_blocking_cmd - Send command and sleep on its completion.
751 * @ipr_cmd: ipr command struct
752 * @timeout_func: function to invoke if command times out
758 static void ipr_send_blocking_cmd(struct ipr_cmnd
*ipr_cmd
,
759 void (*timeout_func
) (struct ipr_cmnd
*ipr_cmd
),
762 struct ipr_ioa_cfg
*ioa_cfg
= ipr_cmd
->ioa_cfg
;
764 init_completion(&ipr_cmd
->completion
);
765 ipr_do_req(ipr_cmd
, ipr_internal_cmd_done
, timeout_func
, timeout
);
767 spin_unlock_irq(ioa_cfg
->host
->host_lock
);
768 wait_for_completion(&ipr_cmd
->completion
);
769 spin_lock_irq(ioa_cfg
->host
->host_lock
);
773 * ipr_send_hcam - Send an HCAM to the adapter.
774 * @ioa_cfg: ioa config struct
776 * @hostrcb: hostrcb struct
778 * This function will send a Host Controlled Async command to the adapter.
779 * If HCAMs are currently not allowed to be issued to the adapter, it will
780 * place the hostrcb on the free queue.
785 static void ipr_send_hcam(struct ipr_ioa_cfg
*ioa_cfg
, u8 type
,
786 struct ipr_hostrcb
*hostrcb
)
788 struct ipr_cmnd
*ipr_cmd
;
789 struct ipr_ioarcb
*ioarcb
;
791 if (ioa_cfg
->allow_cmds
) {
792 ipr_cmd
= ipr_get_free_ipr_cmnd(ioa_cfg
);
793 list_add_tail(&ipr_cmd
->queue
, &ioa_cfg
->pending_q
);
794 list_add_tail(&hostrcb
->queue
, &ioa_cfg
->hostrcb_pending_q
);
796 ipr_cmd
->u
.hostrcb
= hostrcb
;
797 ioarcb
= &ipr_cmd
->ioarcb
;
799 ioarcb
->res_handle
= cpu_to_be32(IPR_IOA_RES_HANDLE
);
800 ioarcb
->cmd_pkt
.request_type
= IPR_RQTYPE_HCAM
;
801 ioarcb
->cmd_pkt
.cdb
[0] = IPR_HOST_CONTROLLED_ASYNC
;
802 ioarcb
->cmd_pkt
.cdb
[1] = type
;
803 ioarcb
->cmd_pkt
.cdb
[7] = (sizeof(hostrcb
->hcam
) >> 8) & 0xff;
804 ioarcb
->cmd_pkt
.cdb
[8] = sizeof(hostrcb
->hcam
) & 0xff;
806 ioarcb
->read_data_transfer_length
= cpu_to_be32(sizeof(hostrcb
->hcam
));
807 ioarcb
->read_ioadl_len
= cpu_to_be32(sizeof(struct ipr_ioadl_desc
));
808 ipr_cmd
->ioadl
[0].flags_and_data_len
=
809 cpu_to_be32(IPR_IOADL_FLAGS_READ_LAST
| sizeof(hostrcb
->hcam
));
810 ipr_cmd
->ioadl
[0].address
= cpu_to_be32(hostrcb
->hostrcb_dma
);
812 if (type
== IPR_HCAM_CDB_OP_CODE_CONFIG_CHANGE
)
813 ipr_cmd
->done
= ipr_process_ccn
;
815 ipr_cmd
->done
= ipr_process_error
;
817 ipr_trc_hook(ipr_cmd
, IPR_TRACE_START
, IPR_IOA_RES_ADDR
);
820 writel(be32_to_cpu(ipr_cmd
->ioarcb
.ioarcb_host_pci_addr
),
821 ioa_cfg
->regs
.ioarrin_reg
);
823 list_add_tail(&hostrcb
->queue
, &ioa_cfg
->hostrcb_free_q
);
828 * ipr_init_res_entry - Initialize a resource entry struct.
829 * @res: resource entry struct
834 static void ipr_init_res_entry(struct ipr_resource_entry
*res
)
836 res
->needs_sync_complete
= 0;
839 res
->del_from_ml
= 0;
840 res
->resetting_device
= 0;
842 res
->sata_port
= NULL
;
846 * ipr_handle_config_change - Handle a config change from the adapter
847 * @ioa_cfg: ioa config struct
853 static void ipr_handle_config_change(struct ipr_ioa_cfg
*ioa_cfg
,
854 struct ipr_hostrcb
*hostrcb
)
856 struct ipr_resource_entry
*res
= NULL
;
857 struct ipr_config_table_entry
*cfgte
;
860 cfgte
= &hostrcb
->hcam
.u
.ccn
.cfgte
;
862 list_for_each_entry(res
, &ioa_cfg
->used_res_q
, queue
) {
863 if (!memcmp(&res
->cfgte
.res_addr
, &cfgte
->res_addr
,
864 sizeof(cfgte
->res_addr
))) {
871 if (list_empty(&ioa_cfg
->free_res_q
)) {
872 ipr_send_hcam(ioa_cfg
,
873 IPR_HCAM_CDB_OP_CODE_CONFIG_CHANGE
,
878 res
= list_entry(ioa_cfg
->free_res_q
.next
,
879 struct ipr_resource_entry
, queue
);
881 list_del(&res
->queue
);
882 ipr_init_res_entry(res
);
883 list_add_tail(&res
->queue
, &ioa_cfg
->used_res_q
);
886 memcpy(&res
->cfgte
, cfgte
, sizeof(struct ipr_config_table_entry
));
888 if (hostrcb
->hcam
.notify_type
== IPR_HOST_RCB_NOTIF_TYPE_REM_ENTRY
) {
890 res
->del_from_ml
= 1;
891 res
->cfgte
.res_handle
= IPR_INVALID_RES_HANDLE
;
892 if (ioa_cfg
->allow_ml_add_del
)
893 schedule_work(&ioa_cfg
->work_q
);
895 list_move_tail(&res
->queue
, &ioa_cfg
->free_res_q
);
896 } else if (!res
->sdev
) {
898 if (ioa_cfg
->allow_ml_add_del
)
899 schedule_work(&ioa_cfg
->work_q
);
902 ipr_send_hcam(ioa_cfg
, IPR_HCAM_CDB_OP_CODE_CONFIG_CHANGE
, hostrcb
);
906 * ipr_process_ccn - Op done function for a CCN.
907 * @ipr_cmd: ipr command struct
909 * This function is the op done function for a configuration
910 * change notification host controlled async from the adapter.
915 static void ipr_process_ccn(struct ipr_cmnd
*ipr_cmd
)
917 struct ipr_ioa_cfg
*ioa_cfg
= ipr_cmd
->ioa_cfg
;
918 struct ipr_hostrcb
*hostrcb
= ipr_cmd
->u
.hostrcb
;
919 u32 ioasc
= be32_to_cpu(ipr_cmd
->ioasa
.ioasc
);
921 list_del(&hostrcb
->queue
);
922 list_add_tail(&ipr_cmd
->queue
, &ioa_cfg
->free_q
);
925 if (ioasc
!= IPR_IOASC_IOA_WAS_RESET
)
926 dev_err(&ioa_cfg
->pdev
->dev
,
927 "Host RCB failed with IOASC: 0x%08X\n", ioasc
);
929 ipr_send_hcam(ioa_cfg
, IPR_HCAM_CDB_OP_CODE_CONFIG_CHANGE
, hostrcb
);
931 ipr_handle_config_change(ioa_cfg
, hostrcb
);
936 * strip_and_pad_whitespace - Strip and pad trailing whitespace.
937 * @i: index into buffer
938 * @buf: string to modify
940 * This function will strip all trailing whitespace, pad the end
941 * of the string with a single space, and NULL terminate the string.
944 * new length of string
946 static int strip_and_pad_whitespace(int i
, char *buf
)
948 while (i
&& buf
[i
] == ' ')
956 * ipr_log_vpd_compact - Log the passed extended VPD compactly.
957 * @prefix: string to print at start of printk
958 * @hostrcb: hostrcb pointer
959 * @vpd: vendor/product id/sn struct
964 static void ipr_log_vpd_compact(char *prefix
, struct ipr_hostrcb
*hostrcb
,
967 char buffer
[IPR_VENDOR_ID_LEN
+ IPR_PROD_ID_LEN
+ IPR_SERIAL_NUM_LEN
+ 3];
970 memcpy(buffer
, vpd
->vpids
.vendor_id
, IPR_VENDOR_ID_LEN
);
971 i
= strip_and_pad_whitespace(IPR_VENDOR_ID_LEN
- 1, buffer
);
973 memcpy(&buffer
[i
], vpd
->vpids
.product_id
, IPR_PROD_ID_LEN
);
974 i
= strip_and_pad_whitespace(i
+ IPR_PROD_ID_LEN
- 1, buffer
);
976 memcpy(&buffer
[i
], vpd
->sn
, IPR_SERIAL_NUM_LEN
);
977 buffer
[IPR_SERIAL_NUM_LEN
+ i
] = '\0';
979 ipr_hcam_err(hostrcb
, "%s VPID/SN: %s\n", prefix
, buffer
);
983 * ipr_log_vpd - Log the passed VPD to the error log.
984 * @vpd: vendor/product id/sn struct
989 static void ipr_log_vpd(struct ipr_vpd
*vpd
)
991 char buffer
[IPR_VENDOR_ID_LEN
+ IPR_PROD_ID_LEN
992 + IPR_SERIAL_NUM_LEN
];
994 memcpy(buffer
, vpd
->vpids
.vendor_id
, IPR_VENDOR_ID_LEN
);
995 memcpy(buffer
+ IPR_VENDOR_ID_LEN
, vpd
->vpids
.product_id
,
997 buffer
[IPR_VENDOR_ID_LEN
+ IPR_PROD_ID_LEN
] = '\0';
998 ipr_err("Vendor/Product ID: %s\n", buffer
);
1000 memcpy(buffer
, vpd
->sn
, IPR_SERIAL_NUM_LEN
);
1001 buffer
[IPR_SERIAL_NUM_LEN
] = '\0';
1002 ipr_err(" Serial Number: %s\n", buffer
);
1006 * ipr_log_ext_vpd_compact - Log the passed extended VPD compactly.
1007 * @prefix: string to print at start of printk
1008 * @hostrcb: hostrcb pointer
1009 * @vpd: vendor/product id/sn/wwn struct
1014 static void ipr_log_ext_vpd_compact(char *prefix
, struct ipr_hostrcb
*hostrcb
,
1015 struct ipr_ext_vpd
*vpd
)
1017 ipr_log_vpd_compact(prefix
, hostrcb
, &vpd
->vpd
);
1018 ipr_hcam_err(hostrcb
, "%s WWN: %08X%08X\n", prefix
,
1019 be32_to_cpu(vpd
->wwid
[0]), be32_to_cpu(vpd
->wwid
[1]));
1023 * ipr_log_ext_vpd - Log the passed extended VPD to the error log.
1024 * @vpd: vendor/product id/sn/wwn struct
1029 static void ipr_log_ext_vpd(struct ipr_ext_vpd
*vpd
)
1031 ipr_log_vpd(&vpd
->vpd
);
1032 ipr_err(" WWN: %08X%08X\n", be32_to_cpu(vpd
->wwid
[0]),
1033 be32_to_cpu(vpd
->wwid
[1]));
1037 * ipr_log_enhanced_cache_error - Log a cache error.
1038 * @ioa_cfg: ioa config struct
1039 * @hostrcb: hostrcb struct
1044 static void ipr_log_enhanced_cache_error(struct ipr_ioa_cfg
*ioa_cfg
,
1045 struct ipr_hostrcb
*hostrcb
)
1047 struct ipr_hostrcb_type_12_error
*error
=
1048 &hostrcb
->hcam
.u
.error
.u
.type_12_error
;
1050 ipr_err("-----Current Configuration-----\n");
1051 ipr_err("Cache Directory Card Information:\n");
1052 ipr_log_ext_vpd(&error
->ioa_vpd
);
1053 ipr_err("Adapter Card Information:\n");
1054 ipr_log_ext_vpd(&error
->cfc_vpd
);
1056 ipr_err("-----Expected Configuration-----\n");
1057 ipr_err("Cache Directory Card Information:\n");
1058 ipr_log_ext_vpd(&error
->ioa_last_attached_to_cfc_vpd
);
1059 ipr_err("Adapter Card Information:\n");
1060 ipr_log_ext_vpd(&error
->cfc_last_attached_to_ioa_vpd
);
1062 ipr_err("Additional IOA Data: %08X %08X %08X\n",
1063 be32_to_cpu(error
->ioa_data
[0]),
1064 be32_to_cpu(error
->ioa_data
[1]),
1065 be32_to_cpu(error
->ioa_data
[2]));
1069 * ipr_log_cache_error - Log a cache error.
1070 * @ioa_cfg: ioa config struct
1071 * @hostrcb: hostrcb struct
1076 static void ipr_log_cache_error(struct ipr_ioa_cfg
*ioa_cfg
,
1077 struct ipr_hostrcb
*hostrcb
)
1079 struct ipr_hostrcb_type_02_error
*error
=
1080 &hostrcb
->hcam
.u
.error
.u
.type_02_error
;
1082 ipr_err("-----Current Configuration-----\n");
1083 ipr_err("Cache Directory Card Information:\n");
1084 ipr_log_vpd(&error
->ioa_vpd
);
1085 ipr_err("Adapter Card Information:\n");
1086 ipr_log_vpd(&error
->cfc_vpd
);
1088 ipr_err("-----Expected Configuration-----\n");
1089 ipr_err("Cache Directory Card Information:\n");
1090 ipr_log_vpd(&error
->ioa_last_attached_to_cfc_vpd
);
1091 ipr_err("Adapter Card Information:\n");
1092 ipr_log_vpd(&error
->cfc_last_attached_to_ioa_vpd
);
1094 ipr_err("Additional IOA Data: %08X %08X %08X\n",
1095 be32_to_cpu(error
->ioa_data
[0]),
1096 be32_to_cpu(error
->ioa_data
[1]),
1097 be32_to_cpu(error
->ioa_data
[2]));
1101 * ipr_log_enhanced_config_error - Log a configuration error.
1102 * @ioa_cfg: ioa config struct
1103 * @hostrcb: hostrcb struct
1108 static void ipr_log_enhanced_config_error(struct ipr_ioa_cfg
*ioa_cfg
,
1109 struct ipr_hostrcb
*hostrcb
)
1111 int errors_logged
, i
;
1112 struct ipr_hostrcb_device_data_entry_enhanced
*dev_entry
;
1113 struct ipr_hostrcb_type_13_error
*error
;
1115 error
= &hostrcb
->hcam
.u
.error
.u
.type_13_error
;
1116 errors_logged
= be32_to_cpu(error
->errors_logged
);
1118 ipr_err("Device Errors Detected/Logged: %d/%d\n",
1119 be32_to_cpu(error
->errors_detected
), errors_logged
);
1121 dev_entry
= error
->dev
;
1123 for (i
= 0; i
< errors_logged
; i
++, dev_entry
++) {
1126 ipr_phys_res_err(ioa_cfg
, dev_entry
->dev_res_addr
, "Device %d", i
+ 1);
1127 ipr_log_ext_vpd(&dev_entry
->vpd
);
1129 ipr_err("-----New Device Information-----\n");
1130 ipr_log_ext_vpd(&dev_entry
->new_vpd
);
1132 ipr_err("Cache Directory Card Information:\n");
1133 ipr_log_ext_vpd(&dev_entry
->ioa_last_with_dev_vpd
);
1135 ipr_err("Adapter Card Information:\n");
1136 ipr_log_ext_vpd(&dev_entry
->cfc_last_with_dev_vpd
);
1141 * ipr_log_config_error - Log a configuration error.
1142 * @ioa_cfg: ioa config struct
1143 * @hostrcb: hostrcb struct
1148 static void ipr_log_config_error(struct ipr_ioa_cfg
*ioa_cfg
,
1149 struct ipr_hostrcb
*hostrcb
)
1151 int errors_logged
, i
;
1152 struct ipr_hostrcb_device_data_entry
*dev_entry
;
1153 struct ipr_hostrcb_type_03_error
*error
;
1155 error
= &hostrcb
->hcam
.u
.error
.u
.type_03_error
;
1156 errors_logged
= be32_to_cpu(error
->errors_logged
);
1158 ipr_err("Device Errors Detected/Logged: %d/%d\n",
1159 be32_to_cpu(error
->errors_detected
), errors_logged
);
1161 dev_entry
= error
->dev
;
1163 for (i
= 0; i
< errors_logged
; i
++, dev_entry
++) {
1166 ipr_phys_res_err(ioa_cfg
, dev_entry
->dev_res_addr
, "Device %d", i
+ 1);
1167 ipr_log_vpd(&dev_entry
->vpd
);
1169 ipr_err("-----New Device Information-----\n");
1170 ipr_log_vpd(&dev_entry
->new_vpd
);
1172 ipr_err("Cache Directory Card Information:\n");
1173 ipr_log_vpd(&dev_entry
->ioa_last_with_dev_vpd
);
1175 ipr_err("Adapter Card Information:\n");
1176 ipr_log_vpd(&dev_entry
->cfc_last_with_dev_vpd
);
1178 ipr_err("Additional IOA Data: %08X %08X %08X %08X %08X\n",
1179 be32_to_cpu(dev_entry
->ioa_data
[0]),
1180 be32_to_cpu(dev_entry
->ioa_data
[1]),
1181 be32_to_cpu(dev_entry
->ioa_data
[2]),
1182 be32_to_cpu(dev_entry
->ioa_data
[3]),
1183 be32_to_cpu(dev_entry
->ioa_data
[4]));
1188 * ipr_log_enhanced_array_error - Log an array configuration error.
1189 * @ioa_cfg: ioa config struct
1190 * @hostrcb: hostrcb struct
1195 static void ipr_log_enhanced_array_error(struct ipr_ioa_cfg
*ioa_cfg
,
1196 struct ipr_hostrcb
*hostrcb
)
1199 struct ipr_hostrcb_type_14_error
*error
;
1200 struct ipr_hostrcb_array_data_entry_enhanced
*array_entry
;
1201 const u8 zero_sn
[IPR_SERIAL_NUM_LEN
] = { [0 ... IPR_SERIAL_NUM_LEN
-1] = '0' };
1203 error
= &hostrcb
->hcam
.u
.error
.u
.type_14_error
;
1207 ipr_err("RAID %s Array Configuration: %d:%d:%d:%d\n",
1208 error
->protection_level
,
1209 ioa_cfg
->host
->host_no
,
1210 error
->last_func_vset_res_addr
.bus
,
1211 error
->last_func_vset_res_addr
.target
,
1212 error
->last_func_vset_res_addr
.lun
);
1216 array_entry
= error
->array_member
;
1217 num_entries
= min_t(u32
, be32_to_cpu(error
->num_entries
),
1218 sizeof(error
->array_member
));
1220 for (i
= 0; i
< num_entries
; i
++, array_entry
++) {
1221 if (!memcmp(array_entry
->vpd
.vpd
.sn
, zero_sn
, IPR_SERIAL_NUM_LEN
))
1224 if (be32_to_cpu(error
->exposed_mode_adn
) == i
)
1225 ipr_err("Exposed Array Member %d:\n", i
);
1227 ipr_err("Array Member %d:\n", i
);
1229 ipr_log_ext_vpd(&array_entry
->vpd
);
1230 ipr_phys_res_err(ioa_cfg
, array_entry
->dev_res_addr
, "Current Location");
1231 ipr_phys_res_err(ioa_cfg
, array_entry
->expected_dev_res_addr
,
1232 "Expected Location");
1239 * ipr_log_array_error - Log an array configuration error.
1240 * @ioa_cfg: ioa config struct
1241 * @hostrcb: hostrcb struct
1246 static void ipr_log_array_error(struct ipr_ioa_cfg
*ioa_cfg
,
1247 struct ipr_hostrcb
*hostrcb
)
1250 struct ipr_hostrcb_type_04_error
*error
;
1251 struct ipr_hostrcb_array_data_entry
*array_entry
;
1252 const u8 zero_sn
[IPR_SERIAL_NUM_LEN
] = { [0 ... IPR_SERIAL_NUM_LEN
-1] = '0' };
1254 error
= &hostrcb
->hcam
.u
.error
.u
.type_04_error
;
1258 ipr_err("RAID %s Array Configuration: %d:%d:%d:%d\n",
1259 error
->protection_level
,
1260 ioa_cfg
->host
->host_no
,
1261 error
->last_func_vset_res_addr
.bus
,
1262 error
->last_func_vset_res_addr
.target
,
1263 error
->last_func_vset_res_addr
.lun
);
1267 array_entry
= error
->array_member
;
1269 for (i
= 0; i
< 18; i
++) {
1270 if (!memcmp(array_entry
->vpd
.sn
, zero_sn
, IPR_SERIAL_NUM_LEN
))
1273 if (be32_to_cpu(error
->exposed_mode_adn
) == i
)
1274 ipr_err("Exposed Array Member %d:\n", i
);
1276 ipr_err("Array Member %d:\n", i
);
1278 ipr_log_vpd(&array_entry
->vpd
);
1280 ipr_phys_res_err(ioa_cfg
, array_entry
->dev_res_addr
, "Current Location");
1281 ipr_phys_res_err(ioa_cfg
, array_entry
->expected_dev_res_addr
,
1282 "Expected Location");
1287 array_entry
= error
->array_member2
;
1294 * ipr_log_hex_data - Log additional hex IOA error data.
1295 * @ioa_cfg: ioa config struct
1296 * @data: IOA error data
1302 static void ipr_log_hex_data(struct ipr_ioa_cfg
*ioa_cfg
, u32
*data
, int len
)
1309 if (ioa_cfg
->log_level
<= IPR_DEFAULT_LOG_LEVEL
)
1310 len
= min_t(int, len
, IPR_DEFAULT_MAX_ERROR_DUMP
);
1312 for (i
= 0; i
< len
/ 4; i
+= 4) {
1313 ipr_err("%08X: %08X %08X %08X %08X\n", i
*4,
1314 be32_to_cpu(data
[i
]),
1315 be32_to_cpu(data
[i
+1]),
1316 be32_to_cpu(data
[i
+2]),
1317 be32_to_cpu(data
[i
+3]));
1322 * ipr_log_enhanced_dual_ioa_error - Log an enhanced dual adapter error.
1323 * @ioa_cfg: ioa config struct
1324 * @hostrcb: hostrcb struct
1329 static void ipr_log_enhanced_dual_ioa_error(struct ipr_ioa_cfg
*ioa_cfg
,
1330 struct ipr_hostrcb
*hostrcb
)
1332 struct ipr_hostrcb_type_17_error
*error
;
1334 error
= &hostrcb
->hcam
.u
.error
.u
.type_17_error
;
1335 error
->failure_reason
[sizeof(error
->failure_reason
) - 1] = '\0';
1336 strstrip(error
->failure_reason
);
1338 ipr_hcam_err(hostrcb
, "%s [PRC: %08X]\n", error
->failure_reason
,
1339 be32_to_cpu(hostrcb
->hcam
.u
.error
.prc
));
1340 ipr_log_ext_vpd_compact("Remote IOA", hostrcb
, &error
->vpd
);
1341 ipr_log_hex_data(ioa_cfg
, error
->data
,
1342 be32_to_cpu(hostrcb
->hcam
.length
) -
1343 (offsetof(struct ipr_hostrcb_error
, u
) +
1344 offsetof(struct ipr_hostrcb_type_17_error
, data
)));
1348 * ipr_log_dual_ioa_error - Log a dual adapter error.
1349 * @ioa_cfg: ioa config struct
1350 * @hostrcb: hostrcb struct
1355 static void ipr_log_dual_ioa_error(struct ipr_ioa_cfg
*ioa_cfg
,
1356 struct ipr_hostrcb
*hostrcb
)
1358 struct ipr_hostrcb_type_07_error
*error
;
1360 error
= &hostrcb
->hcam
.u
.error
.u
.type_07_error
;
1361 error
->failure_reason
[sizeof(error
->failure_reason
) - 1] = '\0';
1362 strstrip(error
->failure_reason
);
1364 ipr_hcam_err(hostrcb
, "%s [PRC: %08X]\n", error
->failure_reason
,
1365 be32_to_cpu(hostrcb
->hcam
.u
.error
.prc
));
1366 ipr_log_vpd_compact("Remote IOA", hostrcb
, &error
->vpd
);
1367 ipr_log_hex_data(ioa_cfg
, error
->data
,
1368 be32_to_cpu(hostrcb
->hcam
.length
) -
1369 (offsetof(struct ipr_hostrcb_error
, u
) +
1370 offsetof(struct ipr_hostrcb_type_07_error
, data
)));
1373 static const struct {
1376 } path_active_desc
[] = {
1377 { IPR_PATH_NO_INFO
, "Path" },
1378 { IPR_PATH_ACTIVE
, "Active path" },
1379 { IPR_PATH_NOT_ACTIVE
, "Inactive path" }
1382 static const struct {
1385 } path_state_desc
[] = {
1386 { IPR_PATH_STATE_NO_INFO
, "has no path state information available" },
1387 { IPR_PATH_HEALTHY
, "is healthy" },
1388 { IPR_PATH_DEGRADED
, "is degraded" },
1389 { IPR_PATH_FAILED
, "is failed" }
1393 * ipr_log_fabric_path - Log a fabric path error
1394 * @hostrcb: hostrcb struct
1395 * @fabric: fabric descriptor
1400 static void ipr_log_fabric_path(struct ipr_hostrcb
*hostrcb
,
1401 struct ipr_hostrcb_fabric_desc
*fabric
)
1404 u8 path_state
= fabric
->path_state
;
1405 u8 active
= path_state
& IPR_PATH_ACTIVE_MASK
;
1406 u8 state
= path_state
& IPR_PATH_STATE_MASK
;
1408 for (i
= 0; i
< ARRAY_SIZE(path_active_desc
); i
++) {
1409 if (path_active_desc
[i
].active
!= active
)
1412 for (j
= 0; j
< ARRAY_SIZE(path_state_desc
); j
++) {
1413 if (path_state_desc
[j
].state
!= state
)
1416 if (fabric
->cascaded_expander
== 0xff && fabric
->phy
== 0xff) {
1417 ipr_hcam_err(hostrcb
, "%s %s: IOA Port=%d\n",
1418 path_active_desc
[i
].desc
, path_state_desc
[j
].desc
,
1420 } else if (fabric
->cascaded_expander
== 0xff) {
1421 ipr_hcam_err(hostrcb
, "%s %s: IOA Port=%d, Phy=%d\n",
1422 path_active_desc
[i
].desc
, path_state_desc
[j
].desc
,
1423 fabric
->ioa_port
, fabric
->phy
);
1424 } else if (fabric
->phy
== 0xff) {
1425 ipr_hcam_err(hostrcb
, "%s %s: IOA Port=%d, Cascade=%d\n",
1426 path_active_desc
[i
].desc
, path_state_desc
[j
].desc
,
1427 fabric
->ioa_port
, fabric
->cascaded_expander
);
1429 ipr_hcam_err(hostrcb
, "%s %s: IOA Port=%d, Cascade=%d, Phy=%d\n",
1430 path_active_desc
[i
].desc
, path_state_desc
[j
].desc
,
1431 fabric
->ioa_port
, fabric
->cascaded_expander
, fabric
->phy
);
1437 ipr_err("Path state=%02X IOA Port=%d Cascade=%d Phy=%d\n", path_state
,
1438 fabric
->ioa_port
, fabric
->cascaded_expander
, fabric
->phy
);
1441 static const struct {
1444 } path_type_desc
[] = {
1445 { IPR_PATH_CFG_IOA_PORT
, "IOA port" },
1446 { IPR_PATH_CFG_EXP_PORT
, "Expander port" },
1447 { IPR_PATH_CFG_DEVICE_PORT
, "Device port" },
1448 { IPR_PATH_CFG_DEVICE_LUN
, "Device LUN" }
1451 static const struct {
1454 } path_status_desc
[] = {
1455 { IPR_PATH_CFG_NO_PROB
, "Functional" },
1456 { IPR_PATH_CFG_DEGRADED
, "Degraded" },
1457 { IPR_PATH_CFG_FAILED
, "Failed" },
1458 { IPR_PATH_CFG_SUSPECT
, "Suspect" },
1459 { IPR_PATH_NOT_DETECTED
, "Missing" },
1460 { IPR_PATH_INCORRECT_CONN
, "Incorrectly connected" }
1463 static const char *link_rate
[] = {
1466 "phy reset problem",
1483 * ipr_log_path_elem - Log a fabric path element.
1484 * @hostrcb: hostrcb struct
1485 * @cfg: fabric path element struct
1490 static void ipr_log_path_elem(struct ipr_hostrcb
*hostrcb
,
1491 struct ipr_hostrcb_config_element
*cfg
)
1494 u8 type
= cfg
->type_status
& IPR_PATH_CFG_TYPE_MASK
;
1495 u8 status
= cfg
->type_status
& IPR_PATH_CFG_STATUS_MASK
;
1497 if (type
== IPR_PATH_CFG_NOT_EXIST
)
1500 for (i
= 0; i
< ARRAY_SIZE(path_type_desc
); i
++) {
1501 if (path_type_desc
[i
].type
!= type
)
1504 for (j
= 0; j
< ARRAY_SIZE(path_status_desc
); j
++) {
1505 if (path_status_desc
[j
].status
!= status
)
1508 if (type
== IPR_PATH_CFG_IOA_PORT
) {
1509 ipr_hcam_err(hostrcb
, "%s %s: Phy=%d, Link rate=%s, WWN=%08X%08X\n",
1510 path_status_desc
[j
].desc
, path_type_desc
[i
].desc
,
1511 cfg
->phy
, link_rate
[cfg
->link_rate
& IPR_PHY_LINK_RATE_MASK
],
1512 be32_to_cpu(cfg
->wwid
[0]), be32_to_cpu(cfg
->wwid
[1]));
1514 if (cfg
->cascaded_expander
== 0xff && cfg
->phy
== 0xff) {
1515 ipr_hcam_err(hostrcb
, "%s %s: Link rate=%s, WWN=%08X%08X\n",
1516 path_status_desc
[j
].desc
, path_type_desc
[i
].desc
,
1517 link_rate
[cfg
->link_rate
& IPR_PHY_LINK_RATE_MASK
],
1518 be32_to_cpu(cfg
->wwid
[0]), be32_to_cpu(cfg
->wwid
[1]));
1519 } else if (cfg
->cascaded_expander
== 0xff) {
1520 ipr_hcam_err(hostrcb
, "%s %s: Phy=%d, Link rate=%s, "
1521 "WWN=%08X%08X\n", path_status_desc
[j
].desc
,
1522 path_type_desc
[i
].desc
, cfg
->phy
,
1523 link_rate
[cfg
->link_rate
& IPR_PHY_LINK_RATE_MASK
],
1524 be32_to_cpu(cfg
->wwid
[0]), be32_to_cpu(cfg
->wwid
[1]));
1525 } else if (cfg
->phy
== 0xff) {
1526 ipr_hcam_err(hostrcb
, "%s %s: Cascade=%d, Link rate=%s, "
1527 "WWN=%08X%08X\n", path_status_desc
[j
].desc
,
1528 path_type_desc
[i
].desc
, cfg
->cascaded_expander
,
1529 link_rate
[cfg
->link_rate
& IPR_PHY_LINK_RATE_MASK
],
1530 be32_to_cpu(cfg
->wwid
[0]), be32_to_cpu(cfg
->wwid
[1]));
1532 ipr_hcam_err(hostrcb
, "%s %s: Cascade=%d, Phy=%d, Link rate=%s "
1533 "WWN=%08X%08X\n", path_status_desc
[j
].desc
,
1534 path_type_desc
[i
].desc
, cfg
->cascaded_expander
, cfg
->phy
,
1535 link_rate
[cfg
->link_rate
& IPR_PHY_LINK_RATE_MASK
],
1536 be32_to_cpu(cfg
->wwid
[0]), be32_to_cpu(cfg
->wwid
[1]));
1543 ipr_hcam_err(hostrcb
, "Path element=%02X: Cascade=%d Phy=%d Link rate=%s "
1544 "WWN=%08X%08X\n", cfg
->type_status
, cfg
->cascaded_expander
, cfg
->phy
,
1545 link_rate
[cfg
->link_rate
& IPR_PHY_LINK_RATE_MASK
],
1546 be32_to_cpu(cfg
->wwid
[0]), be32_to_cpu(cfg
->wwid
[1]));
1550 * ipr_log_fabric_error - Log a fabric error.
1551 * @ioa_cfg: ioa config struct
1552 * @hostrcb: hostrcb struct
1557 static void ipr_log_fabric_error(struct ipr_ioa_cfg
*ioa_cfg
,
1558 struct ipr_hostrcb
*hostrcb
)
1560 struct ipr_hostrcb_type_20_error
*error
;
1561 struct ipr_hostrcb_fabric_desc
*fabric
;
1562 struct ipr_hostrcb_config_element
*cfg
;
1565 error
= &hostrcb
->hcam
.u
.error
.u
.type_20_error
;
1566 error
->failure_reason
[sizeof(error
->failure_reason
) - 1] = '\0';
1567 ipr_hcam_err(hostrcb
, "%s\n", error
->failure_reason
);
1569 add_len
= be32_to_cpu(hostrcb
->hcam
.length
) -
1570 (offsetof(struct ipr_hostrcb_error
, u
) +
1571 offsetof(struct ipr_hostrcb_type_20_error
, desc
));
1573 for (i
= 0, fabric
= error
->desc
; i
< error
->num_entries
; i
++) {
1574 ipr_log_fabric_path(hostrcb
, fabric
);
1575 for_each_fabric_cfg(fabric
, cfg
)
1576 ipr_log_path_elem(hostrcb
, cfg
);
1578 add_len
-= be16_to_cpu(fabric
->length
);
1579 fabric
= (struct ipr_hostrcb_fabric_desc
*)
1580 ((unsigned long)fabric
+ be16_to_cpu(fabric
->length
));
1583 ipr_log_hex_data(ioa_cfg
, (u32
*)fabric
, add_len
);
1587 * ipr_log_generic_error - Log an adapter error.
1588 * @ioa_cfg: ioa config struct
1589 * @hostrcb: hostrcb struct
1594 static void ipr_log_generic_error(struct ipr_ioa_cfg
*ioa_cfg
,
1595 struct ipr_hostrcb
*hostrcb
)
1597 ipr_log_hex_data(ioa_cfg
, hostrcb
->hcam
.u
.raw
.data
,
1598 be32_to_cpu(hostrcb
->hcam
.length
));
1602 * ipr_get_error - Find the specfied IOASC in the ipr_error_table.
1605 * This function will return the index of into the ipr_error_table
1606 * for the specified IOASC. If the IOASC is not in the table,
1607 * 0 will be returned, which points to the entry used for unknown errors.
1610 * index into the ipr_error_table
1612 static u32
ipr_get_error(u32 ioasc
)
1616 for (i
= 0; i
< ARRAY_SIZE(ipr_error_table
); i
++)
1617 if (ipr_error_table
[i
].ioasc
== (ioasc
& IPR_IOASC_IOASC_MASK
))
1624 * ipr_handle_log_data - Log an adapter error.
1625 * @ioa_cfg: ioa config struct
1626 * @hostrcb: hostrcb struct
1628 * This function logs an adapter error to the system.
1633 static void ipr_handle_log_data(struct ipr_ioa_cfg
*ioa_cfg
,
1634 struct ipr_hostrcb
*hostrcb
)
1639 if (hostrcb
->hcam
.notify_type
!= IPR_HOST_RCB_NOTIF_TYPE_ERROR_LOG_ENTRY
)
1642 if (hostrcb
->hcam
.notifications_lost
== IPR_HOST_RCB_NOTIFICATIONS_LOST
)
1643 dev_err(&ioa_cfg
->pdev
->dev
, "Error notifications lost\n");
1645 ioasc
= be32_to_cpu(hostrcb
->hcam
.u
.error
.failing_dev_ioasc
);
1647 if (ioasc
== IPR_IOASC_BUS_WAS_RESET
||
1648 ioasc
== IPR_IOASC_BUS_WAS_RESET_BY_OTHER
) {
1649 /* Tell the midlayer we had a bus reset so it will handle the UA properly */
1650 scsi_report_bus_reset(ioa_cfg
->host
,
1651 hostrcb
->hcam
.u
.error
.failing_dev_res_addr
.bus
);
1654 error_index
= ipr_get_error(ioasc
);
1656 if (!ipr_error_table
[error_index
].log_hcam
)
1659 ipr_hcam_err(hostrcb
, "%s\n", ipr_error_table
[error_index
].error
);
1661 /* Set indication we have logged an error */
1662 ioa_cfg
->errors_logged
++;
1664 if (ioa_cfg
->log_level
< ipr_error_table
[error_index
].log_hcam
)
1666 if (be32_to_cpu(hostrcb
->hcam
.length
) > sizeof(hostrcb
->hcam
.u
.raw
))
1667 hostrcb
->hcam
.length
= cpu_to_be32(sizeof(hostrcb
->hcam
.u
.raw
));
1669 switch (hostrcb
->hcam
.overlay_id
) {
1670 case IPR_HOST_RCB_OVERLAY_ID_2
:
1671 ipr_log_cache_error(ioa_cfg
, hostrcb
);
1673 case IPR_HOST_RCB_OVERLAY_ID_3
:
1674 ipr_log_config_error(ioa_cfg
, hostrcb
);
1676 case IPR_HOST_RCB_OVERLAY_ID_4
:
1677 case IPR_HOST_RCB_OVERLAY_ID_6
:
1678 ipr_log_array_error(ioa_cfg
, hostrcb
);
1680 case IPR_HOST_RCB_OVERLAY_ID_7
:
1681 ipr_log_dual_ioa_error(ioa_cfg
, hostrcb
);
1683 case IPR_HOST_RCB_OVERLAY_ID_12
:
1684 ipr_log_enhanced_cache_error(ioa_cfg
, hostrcb
);
1686 case IPR_HOST_RCB_OVERLAY_ID_13
:
1687 ipr_log_enhanced_config_error(ioa_cfg
, hostrcb
);
1689 case IPR_HOST_RCB_OVERLAY_ID_14
:
1690 case IPR_HOST_RCB_OVERLAY_ID_16
:
1691 ipr_log_enhanced_array_error(ioa_cfg
, hostrcb
);
1693 case IPR_HOST_RCB_OVERLAY_ID_17
:
1694 ipr_log_enhanced_dual_ioa_error(ioa_cfg
, hostrcb
);
1696 case IPR_HOST_RCB_OVERLAY_ID_20
:
1697 ipr_log_fabric_error(ioa_cfg
, hostrcb
);
1699 case IPR_HOST_RCB_OVERLAY_ID_1
:
1700 case IPR_HOST_RCB_OVERLAY_ID_DEFAULT
:
1702 ipr_log_generic_error(ioa_cfg
, hostrcb
);
1708 * ipr_process_error - Op done function for an adapter error log.
1709 * @ipr_cmd: ipr command struct
1711 * This function is the op done function for an error log host
1712 * controlled async from the adapter. It will log the error and
1713 * send the HCAM back to the adapter.
1718 static void ipr_process_error(struct ipr_cmnd
*ipr_cmd
)
1720 struct ipr_ioa_cfg
*ioa_cfg
= ipr_cmd
->ioa_cfg
;
1721 struct ipr_hostrcb
*hostrcb
= ipr_cmd
->u
.hostrcb
;
1722 u32 ioasc
= be32_to_cpu(ipr_cmd
->ioasa
.ioasc
);
1723 u32 fd_ioasc
= be32_to_cpu(hostrcb
->hcam
.u
.error
.failing_dev_ioasc
);
1725 list_del(&hostrcb
->queue
);
1726 list_add_tail(&ipr_cmd
->queue
, &ioa_cfg
->free_q
);
1729 ipr_handle_log_data(ioa_cfg
, hostrcb
);
1730 if (fd_ioasc
== IPR_IOASC_NR_IOA_RESET_REQUIRED
)
1731 ipr_initiate_ioa_reset(ioa_cfg
, IPR_SHUTDOWN_ABBREV
);
1732 } else if (ioasc
!= IPR_IOASC_IOA_WAS_RESET
) {
1733 dev_err(&ioa_cfg
->pdev
->dev
,
1734 "Host RCB failed with IOASC: 0x%08X\n", ioasc
);
1737 ipr_send_hcam(ioa_cfg
, IPR_HCAM_CDB_OP_CODE_LOG_DATA
, hostrcb
);
1741 * ipr_timeout - An internally generated op has timed out.
1742 * @ipr_cmd: ipr command struct
1744 * This function blocks host requests and initiates an
1750 static void ipr_timeout(struct ipr_cmnd
*ipr_cmd
)
1752 unsigned long lock_flags
= 0;
1753 struct ipr_ioa_cfg
*ioa_cfg
= ipr_cmd
->ioa_cfg
;
1756 spin_lock_irqsave(ioa_cfg
->host
->host_lock
, lock_flags
);
1758 ioa_cfg
->errors_logged
++;
1759 dev_err(&ioa_cfg
->pdev
->dev
,
1760 "Adapter being reset due to command timeout.\n");
1762 if (WAIT_FOR_DUMP
== ioa_cfg
->sdt_state
)
1763 ioa_cfg
->sdt_state
= GET_DUMP
;
1765 if (!ioa_cfg
->in_reset_reload
|| ioa_cfg
->reset_cmd
== ipr_cmd
)
1766 ipr_initiate_ioa_reset(ioa_cfg
, IPR_SHUTDOWN_NONE
);
1768 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
1773 * ipr_oper_timeout - Adapter timed out transitioning to operational
1774 * @ipr_cmd: ipr command struct
1776 * This function blocks host requests and initiates an
1782 static void ipr_oper_timeout(struct ipr_cmnd
*ipr_cmd
)
1784 unsigned long lock_flags
= 0;
1785 struct ipr_ioa_cfg
*ioa_cfg
= ipr_cmd
->ioa_cfg
;
1788 spin_lock_irqsave(ioa_cfg
->host
->host_lock
, lock_flags
);
1790 ioa_cfg
->errors_logged
++;
1791 dev_err(&ioa_cfg
->pdev
->dev
,
1792 "Adapter timed out transitioning to operational.\n");
1794 if (WAIT_FOR_DUMP
== ioa_cfg
->sdt_state
)
1795 ioa_cfg
->sdt_state
= GET_DUMP
;
1797 if (!ioa_cfg
->in_reset_reload
|| ioa_cfg
->reset_cmd
== ipr_cmd
) {
1799 ioa_cfg
->reset_retries
+= IPR_NUM_RESET_RELOAD_RETRIES
;
1800 ipr_initiate_ioa_reset(ioa_cfg
, IPR_SHUTDOWN_NONE
);
1803 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
1808 * ipr_reset_reload - Reset/Reload the IOA
1809 * @ioa_cfg: ioa config struct
1810 * @shutdown_type: shutdown type
1812 * This function resets the adapter and re-initializes it.
1813 * This function assumes that all new host commands have been stopped.
1817 static int ipr_reset_reload(struct ipr_ioa_cfg
*ioa_cfg
,
1818 enum ipr_shutdown_type shutdown_type
)
1820 if (!ioa_cfg
->in_reset_reload
)
1821 ipr_initiate_ioa_reset(ioa_cfg
, shutdown_type
);
1823 spin_unlock_irq(ioa_cfg
->host
->host_lock
);
1824 wait_event(ioa_cfg
->reset_wait_q
, !ioa_cfg
->in_reset_reload
);
1825 spin_lock_irq(ioa_cfg
->host
->host_lock
);
1827 /* If we got hit with a host reset while we were already resetting
1828 the adapter for some reason, and the reset failed. */
1829 if (ioa_cfg
->ioa_is_dead
) {
1838 * ipr_find_ses_entry - Find matching SES in SES table
1839 * @res: resource entry struct of SES
1842 * pointer to SES table entry / NULL on failure
1844 static const struct ipr_ses_table_entry
*
1845 ipr_find_ses_entry(struct ipr_resource_entry
*res
)
1848 const struct ipr_ses_table_entry
*ste
= ipr_ses_table
;
1850 for (i
= 0; i
< ARRAY_SIZE(ipr_ses_table
); i
++, ste
++) {
1851 for (j
= 0, matches
= 0; j
< IPR_PROD_ID_LEN
; j
++) {
1852 if (ste
->compare_product_id_byte
[j
] == 'X') {
1853 if (res
->cfgte
.std_inq_data
.vpids
.product_id
[j
] == ste
->product_id
[j
])
1861 if (matches
== IPR_PROD_ID_LEN
)
1869 * ipr_get_max_scsi_speed - Determine max SCSI speed for a given bus
1870 * @ioa_cfg: ioa config struct
1872 * @bus_width: bus width
1875 * SCSI bus speed in units of 100KHz, 1600 is 160 MHz
1876 * For a 2-byte wide SCSI bus, the maximum transfer speed is
1877 * twice the maximum transfer rate (e.g. for a wide enabled bus,
1878 * max 160MHz = max 320MB/sec).
1880 static u32
ipr_get_max_scsi_speed(struct ipr_ioa_cfg
*ioa_cfg
, u8 bus
, u8 bus_width
)
1882 struct ipr_resource_entry
*res
;
1883 const struct ipr_ses_table_entry
*ste
;
1884 u32 max_xfer_rate
= IPR_MAX_SCSI_RATE(bus_width
);
1886 /* Loop through each config table entry in the config table buffer */
1887 list_for_each_entry(res
, &ioa_cfg
->used_res_q
, queue
) {
1888 if (!(IPR_IS_SES_DEVICE(res
->cfgte
.std_inq_data
)))
1891 if (bus
!= res
->cfgte
.res_addr
.bus
)
1894 if (!(ste
= ipr_find_ses_entry(res
)))
1897 max_xfer_rate
= (ste
->max_bus_speed_limit
* 10) / (bus_width
/ 8);
1900 return max_xfer_rate
;
1904 * ipr_wait_iodbg_ack - Wait for an IODEBUG ACK from the IOA
1905 * @ioa_cfg: ioa config struct
1906 * @max_delay: max delay in micro-seconds to wait
1908 * Waits for an IODEBUG ACK from the IOA, doing busy looping.
1911 * 0 on success / other on failure
1913 static int ipr_wait_iodbg_ack(struct ipr_ioa_cfg
*ioa_cfg
, int max_delay
)
1915 volatile u32 pcii_reg
;
1918 /* Read interrupt reg until IOA signals IO Debug Acknowledge */
1919 while (delay
< max_delay
) {
1920 pcii_reg
= readl(ioa_cfg
->regs
.sense_interrupt_reg
);
1922 if (pcii_reg
& IPR_PCII_IO_DEBUG_ACKNOWLEDGE
)
1925 /* udelay cannot be used if delay is more than a few milliseconds */
1926 if ((delay
/ 1000) > MAX_UDELAY_MS
)
1927 mdelay(delay
/ 1000);
1937 * ipr_get_ldump_data_section - Dump IOA memory
1938 * @ioa_cfg: ioa config struct
1939 * @start_addr: adapter address to dump
1940 * @dest: destination kernel buffer
1941 * @length_in_words: length to dump in 4 byte words
1944 * 0 on success / -EIO on failure
1946 static int ipr_get_ldump_data_section(struct ipr_ioa_cfg
*ioa_cfg
,
1948 __be32
*dest
, u32 length_in_words
)
1950 volatile u32 temp_pcii_reg
;
1953 /* Write IOA interrupt reg starting LDUMP state */
1954 writel((IPR_UPROCI_RESET_ALERT
| IPR_UPROCI_IO_DEBUG_ALERT
),
1955 ioa_cfg
->regs
.set_uproc_interrupt_reg
);
1957 /* Wait for IO debug acknowledge */
1958 if (ipr_wait_iodbg_ack(ioa_cfg
,
1959 IPR_LDUMP_MAX_LONG_ACK_DELAY_IN_USEC
)) {
1960 dev_err(&ioa_cfg
->pdev
->dev
,
1961 "IOA dump long data transfer timeout\n");
1965 /* Signal LDUMP interlocked - clear IO debug ack */
1966 writel(IPR_PCII_IO_DEBUG_ACKNOWLEDGE
,
1967 ioa_cfg
->regs
.clr_interrupt_reg
);
1969 /* Write Mailbox with starting address */
1970 writel(start_addr
, ioa_cfg
->ioa_mailbox
);
1972 /* Signal address valid - clear IOA Reset alert */
1973 writel(IPR_UPROCI_RESET_ALERT
,
1974 ioa_cfg
->regs
.clr_uproc_interrupt_reg
);
1976 for (i
= 0; i
< length_in_words
; i
++) {
1977 /* Wait for IO debug acknowledge */
1978 if (ipr_wait_iodbg_ack(ioa_cfg
,
1979 IPR_LDUMP_MAX_SHORT_ACK_DELAY_IN_USEC
)) {
1980 dev_err(&ioa_cfg
->pdev
->dev
,
1981 "IOA dump short data transfer timeout\n");
1985 /* Read data from mailbox and increment destination pointer */
1986 *dest
= cpu_to_be32(readl(ioa_cfg
->ioa_mailbox
));
1989 /* For all but the last word of data, signal data received */
1990 if (i
< (length_in_words
- 1)) {
1991 /* Signal dump data received - Clear IO debug Ack */
1992 writel(IPR_PCII_IO_DEBUG_ACKNOWLEDGE
,
1993 ioa_cfg
->regs
.clr_interrupt_reg
);
1997 /* Signal end of block transfer. Set reset alert then clear IO debug ack */
1998 writel(IPR_UPROCI_RESET_ALERT
,
1999 ioa_cfg
->regs
.set_uproc_interrupt_reg
);
2001 writel(IPR_UPROCI_IO_DEBUG_ALERT
,
2002 ioa_cfg
->regs
.clr_uproc_interrupt_reg
);
2004 /* Signal dump data received - Clear IO debug Ack */
2005 writel(IPR_PCII_IO_DEBUG_ACKNOWLEDGE
,
2006 ioa_cfg
->regs
.clr_interrupt_reg
);
2008 /* Wait for IOA to signal LDUMP exit - IOA reset alert will be cleared */
2009 while (delay
< IPR_LDUMP_MAX_SHORT_ACK_DELAY_IN_USEC
) {
2011 readl(ioa_cfg
->regs
.sense_uproc_interrupt_reg
);
2013 if (!(temp_pcii_reg
& IPR_UPROCI_RESET_ALERT
))
2023 #ifdef CONFIG_SCSI_IPR_DUMP
2025 * ipr_sdt_copy - Copy Smart Dump Table to kernel buffer
2026 * @ioa_cfg: ioa config struct
2027 * @pci_address: adapter address
2028 * @length: length of data to copy
2030 * Copy data from PCI adapter to kernel buffer.
2031 * Note: length MUST be a 4 byte multiple
2033 * 0 on success / other on failure
2035 static int ipr_sdt_copy(struct ipr_ioa_cfg
*ioa_cfg
,
2036 unsigned long pci_address
, u32 length
)
2038 int bytes_copied
= 0;
2039 int cur_len
, rc
, rem_len
, rem_page_len
;
2041 unsigned long lock_flags
= 0;
2042 struct ipr_ioa_dump
*ioa_dump
= &ioa_cfg
->dump
->ioa_dump
;
2044 while (bytes_copied
< length
&&
2045 (ioa_dump
->hdr
.len
+ bytes_copied
) < IPR_MAX_IOA_DUMP_SIZE
) {
2046 if (ioa_dump
->page_offset
>= PAGE_SIZE
||
2047 ioa_dump
->page_offset
== 0) {
2048 page
= (__be32
*)__get_free_page(GFP_ATOMIC
);
2052 return bytes_copied
;
2055 ioa_dump
->page_offset
= 0;
2056 ioa_dump
->ioa_data
[ioa_dump
->next_page_index
] = page
;
2057 ioa_dump
->next_page_index
++;
2059 page
= ioa_dump
->ioa_data
[ioa_dump
->next_page_index
- 1];
2061 rem_len
= length
- bytes_copied
;
2062 rem_page_len
= PAGE_SIZE
- ioa_dump
->page_offset
;
2063 cur_len
= min(rem_len
, rem_page_len
);
2065 spin_lock_irqsave(ioa_cfg
->host
->host_lock
, lock_flags
);
2066 if (ioa_cfg
->sdt_state
== ABORT_DUMP
) {
2069 rc
= ipr_get_ldump_data_section(ioa_cfg
,
2070 pci_address
+ bytes_copied
,
2071 &page
[ioa_dump
->page_offset
/ 4],
2072 (cur_len
/ sizeof(u32
)));
2074 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
2077 ioa_dump
->page_offset
+= cur_len
;
2078 bytes_copied
+= cur_len
;
2086 return bytes_copied
;
2090 * ipr_init_dump_entry_hdr - Initialize a dump entry header.
2091 * @hdr: dump entry header struct
2096 static void ipr_init_dump_entry_hdr(struct ipr_dump_entry_header
*hdr
)
2098 hdr
->eye_catcher
= IPR_DUMP_EYE_CATCHER
;
2100 hdr
->offset
= sizeof(*hdr
);
2101 hdr
->status
= IPR_DUMP_STATUS_SUCCESS
;
2105 * ipr_dump_ioa_type_data - Fill in the adapter type in the dump.
2106 * @ioa_cfg: ioa config struct
2107 * @driver_dump: driver dump struct
2112 static void ipr_dump_ioa_type_data(struct ipr_ioa_cfg
*ioa_cfg
,
2113 struct ipr_driver_dump
*driver_dump
)
2115 struct ipr_inquiry_page3
*ucode_vpd
= &ioa_cfg
->vpd_cbs
->page3_data
;
2117 ipr_init_dump_entry_hdr(&driver_dump
->ioa_type_entry
.hdr
);
2118 driver_dump
->ioa_type_entry
.hdr
.len
=
2119 sizeof(struct ipr_dump_ioa_type_entry
) -
2120 sizeof(struct ipr_dump_entry_header
);
2121 driver_dump
->ioa_type_entry
.hdr
.data_type
= IPR_DUMP_DATA_TYPE_BINARY
;
2122 driver_dump
->ioa_type_entry
.hdr
.id
= IPR_DUMP_DRIVER_TYPE_ID
;
2123 driver_dump
->ioa_type_entry
.type
= ioa_cfg
->type
;
2124 driver_dump
->ioa_type_entry
.fw_version
= (ucode_vpd
->major_release
<< 24) |
2125 (ucode_vpd
->card_type
<< 16) | (ucode_vpd
->minor_release
[0] << 8) |
2126 ucode_vpd
->minor_release
[1];
2127 driver_dump
->hdr
.num_entries
++;
2131 * ipr_dump_version_data - Fill in the driver version in the dump.
2132 * @ioa_cfg: ioa config struct
2133 * @driver_dump: driver dump struct
2138 static void ipr_dump_version_data(struct ipr_ioa_cfg
*ioa_cfg
,
2139 struct ipr_driver_dump
*driver_dump
)
2141 ipr_init_dump_entry_hdr(&driver_dump
->version_entry
.hdr
);
2142 driver_dump
->version_entry
.hdr
.len
=
2143 sizeof(struct ipr_dump_version_entry
) -
2144 sizeof(struct ipr_dump_entry_header
);
2145 driver_dump
->version_entry
.hdr
.data_type
= IPR_DUMP_DATA_TYPE_ASCII
;
2146 driver_dump
->version_entry
.hdr
.id
= IPR_DUMP_DRIVER_VERSION_ID
;
2147 strcpy(driver_dump
->version_entry
.version
, IPR_DRIVER_VERSION
);
2148 driver_dump
->hdr
.num_entries
++;
2152 * ipr_dump_trace_data - Fill in the IOA trace in the dump.
2153 * @ioa_cfg: ioa config struct
2154 * @driver_dump: driver dump struct
2159 static void ipr_dump_trace_data(struct ipr_ioa_cfg
*ioa_cfg
,
2160 struct ipr_driver_dump
*driver_dump
)
2162 ipr_init_dump_entry_hdr(&driver_dump
->trace_entry
.hdr
);
2163 driver_dump
->trace_entry
.hdr
.len
=
2164 sizeof(struct ipr_dump_trace_entry
) -
2165 sizeof(struct ipr_dump_entry_header
);
2166 driver_dump
->trace_entry
.hdr
.data_type
= IPR_DUMP_DATA_TYPE_BINARY
;
2167 driver_dump
->trace_entry
.hdr
.id
= IPR_DUMP_TRACE_ID
;
2168 memcpy(driver_dump
->trace_entry
.trace
, ioa_cfg
->trace
, IPR_TRACE_SIZE
);
2169 driver_dump
->hdr
.num_entries
++;
2173 * ipr_dump_location_data - Fill in the IOA location in the dump.
2174 * @ioa_cfg: ioa config struct
2175 * @driver_dump: driver dump struct
2180 static void ipr_dump_location_data(struct ipr_ioa_cfg
*ioa_cfg
,
2181 struct ipr_driver_dump
*driver_dump
)
2183 ipr_init_dump_entry_hdr(&driver_dump
->location_entry
.hdr
);
2184 driver_dump
->location_entry
.hdr
.len
=
2185 sizeof(struct ipr_dump_location_entry
) -
2186 sizeof(struct ipr_dump_entry_header
);
2187 driver_dump
->location_entry
.hdr
.data_type
= IPR_DUMP_DATA_TYPE_ASCII
;
2188 driver_dump
->location_entry
.hdr
.id
= IPR_DUMP_LOCATION_ID
;
2189 strcpy(driver_dump
->location_entry
.location
, dev_name(&ioa_cfg
->pdev
->dev
));
2190 driver_dump
->hdr
.num_entries
++;
2194 * ipr_get_ioa_dump - Perform a dump of the driver and adapter.
2195 * @ioa_cfg: ioa config struct
2196 * @dump: dump struct
2201 static void ipr_get_ioa_dump(struct ipr_ioa_cfg
*ioa_cfg
, struct ipr_dump
*dump
)
2203 unsigned long start_addr
, sdt_word
;
2204 unsigned long lock_flags
= 0;
2205 struct ipr_driver_dump
*driver_dump
= &dump
->driver_dump
;
2206 struct ipr_ioa_dump
*ioa_dump
= &dump
->ioa_dump
;
2207 u32 num_entries
, start_off
, end_off
;
2208 u32 bytes_to_copy
, bytes_copied
, rc
;
2209 struct ipr_sdt
*sdt
;
2214 spin_lock_irqsave(ioa_cfg
->host
->host_lock
, lock_flags
);
2216 if (ioa_cfg
->sdt_state
!= GET_DUMP
) {
2217 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
2221 start_addr
= readl(ioa_cfg
->ioa_mailbox
);
2223 if (!ipr_sdt_is_fmt2(start_addr
)) {
2224 dev_err(&ioa_cfg
->pdev
->dev
,
2225 "Invalid dump table format: %lx\n", start_addr
);
2226 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
2230 dev_err(&ioa_cfg
->pdev
->dev
, "Dump of IOA initiated\n");
2232 driver_dump
->hdr
.eye_catcher
= IPR_DUMP_EYE_CATCHER
;
2234 /* Initialize the overall dump header */
2235 driver_dump
->hdr
.len
= sizeof(struct ipr_driver_dump
);
2236 driver_dump
->hdr
.num_entries
= 1;
2237 driver_dump
->hdr
.first_entry_offset
= sizeof(struct ipr_dump_header
);
2238 driver_dump
->hdr
.status
= IPR_DUMP_STATUS_SUCCESS
;
2239 driver_dump
->hdr
.os
= IPR_DUMP_OS_LINUX
;
2240 driver_dump
->hdr
.driver_name
= IPR_DUMP_DRIVER_NAME
;
2242 ipr_dump_version_data(ioa_cfg
, driver_dump
);
2243 ipr_dump_location_data(ioa_cfg
, driver_dump
);
2244 ipr_dump_ioa_type_data(ioa_cfg
, driver_dump
);
2245 ipr_dump_trace_data(ioa_cfg
, driver_dump
);
2247 /* Update dump_header */
2248 driver_dump
->hdr
.len
+= sizeof(struct ipr_dump_entry_header
);
2250 /* IOA Dump entry */
2251 ipr_init_dump_entry_hdr(&ioa_dump
->hdr
);
2252 ioa_dump
->format
= IPR_SDT_FMT2
;
2253 ioa_dump
->hdr
.len
= 0;
2254 ioa_dump
->hdr
.data_type
= IPR_DUMP_DATA_TYPE_BINARY
;
2255 ioa_dump
->hdr
.id
= IPR_DUMP_IOA_DUMP_ID
;
2257 /* First entries in sdt are actually a list of dump addresses and
2258 lengths to gather the real dump data. sdt represents the pointer
2259 to the ioa generated dump table. Dump data will be extracted based
2260 on entries in this table */
2261 sdt
= &ioa_dump
->sdt
;
2263 rc
= ipr_get_ldump_data_section(ioa_cfg
, start_addr
, (__be32
*)sdt
,
2264 sizeof(struct ipr_sdt
) / sizeof(__be32
));
2266 /* Smart Dump table is ready to use and the first entry is valid */
2267 if (rc
|| (be32_to_cpu(sdt
->hdr
.state
) != IPR_FMT2_SDT_READY_TO_USE
)) {
2268 dev_err(&ioa_cfg
->pdev
->dev
,
2269 "Dump of IOA failed. Dump table not valid: %d, %X.\n",
2270 rc
, be32_to_cpu(sdt
->hdr
.state
));
2271 driver_dump
->hdr
.status
= IPR_DUMP_STATUS_FAILED
;
2272 ioa_cfg
->sdt_state
= DUMP_OBTAINED
;
2273 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
2277 num_entries
= be32_to_cpu(sdt
->hdr
.num_entries_used
);
2279 if (num_entries
> IPR_NUM_SDT_ENTRIES
)
2280 num_entries
= IPR_NUM_SDT_ENTRIES
;
2282 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
2284 for (i
= 0; i
< num_entries
; i
++) {
2285 if (ioa_dump
->hdr
.len
> IPR_MAX_IOA_DUMP_SIZE
) {
2286 driver_dump
->hdr
.status
= IPR_DUMP_STATUS_QUAL_SUCCESS
;
2290 if (sdt
->entry
[i
].flags
& IPR_SDT_VALID_ENTRY
) {
2291 sdt_word
= be32_to_cpu(sdt
->entry
[i
].bar_str_offset
);
2292 start_off
= sdt_word
& IPR_FMT2_MBX_ADDR_MASK
;
2293 end_off
= be32_to_cpu(sdt
->entry
[i
].end_offset
);
2295 if (ipr_sdt_is_fmt2(sdt_word
) && sdt_word
) {
2296 bytes_to_copy
= end_off
- start_off
;
2297 if (bytes_to_copy
> IPR_MAX_IOA_DUMP_SIZE
) {
2298 sdt
->entry
[i
].flags
&= ~IPR_SDT_VALID_ENTRY
;
2302 /* Copy data from adapter to driver buffers */
2303 bytes_copied
= ipr_sdt_copy(ioa_cfg
, sdt_word
,
2306 ioa_dump
->hdr
.len
+= bytes_copied
;
2308 if (bytes_copied
!= bytes_to_copy
) {
2309 driver_dump
->hdr
.status
= IPR_DUMP_STATUS_QUAL_SUCCESS
;
2316 dev_err(&ioa_cfg
->pdev
->dev
, "Dump of IOA completed.\n");
2318 /* Update dump_header */
2319 driver_dump
->hdr
.len
+= ioa_dump
->hdr
.len
;
2321 ioa_cfg
->sdt_state
= DUMP_OBTAINED
;
2326 #define ipr_get_ioa_dump(ioa_cfg, dump) do { } while(0)
2330 * ipr_release_dump - Free adapter dump memory
2331 * @kref: kref struct
2336 static void ipr_release_dump(struct kref
*kref
)
2338 struct ipr_dump
*dump
= container_of(kref
,struct ipr_dump
,kref
);
2339 struct ipr_ioa_cfg
*ioa_cfg
= dump
->ioa_cfg
;
2340 unsigned long lock_flags
= 0;
2344 spin_lock_irqsave(ioa_cfg
->host
->host_lock
, lock_flags
);
2345 ioa_cfg
->dump
= NULL
;
2346 ioa_cfg
->sdt_state
= INACTIVE
;
2347 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
2349 for (i
= 0; i
< dump
->ioa_dump
.next_page_index
; i
++)
2350 free_page((unsigned long) dump
->ioa_dump
.ioa_data
[i
]);
2357 * ipr_worker_thread - Worker thread
2358 * @work: ioa config struct
2360 * Called at task level from a work thread. This function takes care
2361 * of adding and removing device from the mid-layer as configuration
2362 * changes are detected by the adapter.
2367 static void ipr_worker_thread(struct work_struct
*work
)
2369 unsigned long lock_flags
;
2370 struct ipr_resource_entry
*res
;
2371 struct scsi_device
*sdev
;
2372 struct ipr_dump
*dump
;
2373 struct ipr_ioa_cfg
*ioa_cfg
=
2374 container_of(work
, struct ipr_ioa_cfg
, work_q
);
2375 u8 bus
, target
, lun
;
2379 spin_lock_irqsave(ioa_cfg
->host
->host_lock
, lock_flags
);
2381 if (ioa_cfg
->sdt_state
== GET_DUMP
) {
2382 dump
= ioa_cfg
->dump
;
2384 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
2387 kref_get(&dump
->kref
);
2388 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
2389 ipr_get_ioa_dump(ioa_cfg
, dump
);
2390 kref_put(&dump
->kref
, ipr_release_dump
);
2392 spin_lock_irqsave(ioa_cfg
->host
->host_lock
, lock_flags
);
2393 if (ioa_cfg
->sdt_state
== DUMP_OBTAINED
)
2394 ipr_initiate_ioa_reset(ioa_cfg
, IPR_SHUTDOWN_NONE
);
2395 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
2402 if (!ioa_cfg
->allow_cmds
|| !ioa_cfg
->allow_ml_add_del
) {
2403 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
2407 list_for_each_entry(res
, &ioa_cfg
->used_res_q
, queue
) {
2408 if (res
->del_from_ml
&& res
->sdev
) {
2411 if (!scsi_device_get(sdev
)) {
2412 list_move_tail(&res
->queue
, &ioa_cfg
->free_res_q
);
2413 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
2414 scsi_remove_device(sdev
);
2415 scsi_device_put(sdev
);
2416 spin_lock_irqsave(ioa_cfg
->host
->host_lock
, lock_flags
);
2423 list_for_each_entry(res
, &ioa_cfg
->used_res_q
, queue
) {
2424 if (res
->add_to_ml
) {
2425 bus
= res
->cfgte
.res_addr
.bus
;
2426 target
= res
->cfgte
.res_addr
.target
;
2427 lun
= res
->cfgte
.res_addr
.lun
;
2429 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
2430 scsi_add_device(ioa_cfg
->host
, bus
, target
, lun
);
2431 spin_lock_irqsave(ioa_cfg
->host
->host_lock
, lock_flags
);
2436 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
2437 kobject_uevent(&ioa_cfg
->host
->shost_dev
.kobj
, KOBJ_CHANGE
);
2441 #ifdef CONFIG_SCSI_IPR_TRACE
2443 * ipr_read_trace - Dump the adapter trace
2444 * @kobj: kobject struct
2445 * @bin_attr: bin_attribute struct
2448 * @count: buffer size
2451 * number of bytes printed to buffer
2453 static ssize_t
ipr_read_trace(struct kobject
*kobj
,
2454 struct bin_attribute
*bin_attr
,
2455 char *buf
, loff_t off
, size_t count
)
2457 struct device
*dev
= container_of(kobj
, struct device
, kobj
);
2458 struct Scsi_Host
*shost
= class_to_shost(dev
);
2459 struct ipr_ioa_cfg
*ioa_cfg
= (struct ipr_ioa_cfg
*)shost
->hostdata
;
2460 unsigned long lock_flags
= 0;
2463 spin_lock_irqsave(ioa_cfg
->host
->host_lock
, lock_flags
);
2464 ret
= memory_read_from_buffer(buf
, count
, &off
, ioa_cfg
->trace
,
2466 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
2471 static struct bin_attribute ipr_trace_attr
= {
2477 .read
= ipr_read_trace
,
2481 static const struct {
2482 enum ipr_cache_state state
;
2484 } cache_state
[] = {
2485 { CACHE_NONE
, "none" },
2486 { CACHE_DISABLED
, "disabled" },
2487 { CACHE_ENABLED
, "enabled" }
2491 * ipr_show_write_caching - Show the write caching attribute
2492 * @dev: device struct
2496 * number of bytes printed to buffer
2498 static ssize_t
ipr_show_write_caching(struct device
*dev
,
2499 struct device_attribute
*attr
, char *buf
)
2501 struct Scsi_Host
*shost
= class_to_shost(dev
);
2502 struct ipr_ioa_cfg
*ioa_cfg
= (struct ipr_ioa_cfg
*)shost
->hostdata
;
2503 unsigned long lock_flags
= 0;
2506 spin_lock_irqsave(ioa_cfg
->host
->host_lock
, lock_flags
);
2507 for (i
= 0; i
< ARRAY_SIZE(cache_state
); i
++) {
2508 if (cache_state
[i
].state
== ioa_cfg
->cache_state
) {
2509 len
= snprintf(buf
, PAGE_SIZE
, "%s\n", cache_state
[i
].name
);
2513 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
2519 * ipr_store_write_caching - Enable/disable adapter write cache
2520 * @dev: device struct
2522 * @count: buffer size
2524 * This function will enable/disable adapter write cache.
2527 * count on success / other on failure
2529 static ssize_t
ipr_store_write_caching(struct device
*dev
,
2530 struct device_attribute
*attr
,
2531 const char *buf
, size_t count
)
2533 struct Scsi_Host
*shost
= class_to_shost(dev
);
2534 struct ipr_ioa_cfg
*ioa_cfg
= (struct ipr_ioa_cfg
*)shost
->hostdata
;
2535 unsigned long lock_flags
= 0;
2536 enum ipr_cache_state new_state
= CACHE_INVALID
;
2539 if (!capable(CAP_SYS_ADMIN
))
2541 if (ioa_cfg
->cache_state
== CACHE_NONE
)
2544 for (i
= 0; i
< ARRAY_SIZE(cache_state
); i
++) {
2545 if (!strncmp(cache_state
[i
].name
, buf
, strlen(cache_state
[i
].name
))) {
2546 new_state
= cache_state
[i
].state
;
2551 if (new_state
!= CACHE_DISABLED
&& new_state
!= CACHE_ENABLED
)
2554 spin_lock_irqsave(ioa_cfg
->host
->host_lock
, lock_flags
);
2555 if (ioa_cfg
->cache_state
== new_state
) {
2556 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
2560 ioa_cfg
->cache_state
= new_state
;
2561 dev_info(&ioa_cfg
->pdev
->dev
, "%s adapter write cache.\n",
2562 new_state
== CACHE_ENABLED
? "Enabling" : "Disabling");
2563 if (!ioa_cfg
->in_reset_reload
)
2564 ipr_initiate_ioa_reset(ioa_cfg
, IPR_SHUTDOWN_NORMAL
);
2565 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
2566 wait_event(ioa_cfg
->reset_wait_q
, !ioa_cfg
->in_reset_reload
);
2571 static struct device_attribute ipr_ioa_cache_attr
= {
2573 .name
= "write_cache",
2574 .mode
= S_IRUGO
| S_IWUSR
,
2576 .show
= ipr_show_write_caching
,
2577 .store
= ipr_store_write_caching
2581 * ipr_show_fw_version - Show the firmware version
2582 * @dev: class device struct
2586 * number of bytes printed to buffer
2588 static ssize_t
ipr_show_fw_version(struct device
*dev
,
2589 struct device_attribute
*attr
, char *buf
)
2591 struct Scsi_Host
*shost
= class_to_shost(dev
);
2592 struct ipr_ioa_cfg
*ioa_cfg
= (struct ipr_ioa_cfg
*)shost
->hostdata
;
2593 struct ipr_inquiry_page3
*ucode_vpd
= &ioa_cfg
->vpd_cbs
->page3_data
;
2594 unsigned long lock_flags
= 0;
2597 spin_lock_irqsave(ioa_cfg
->host
->host_lock
, lock_flags
);
2598 len
= snprintf(buf
, PAGE_SIZE
, "%02X%02X%02X%02X\n",
2599 ucode_vpd
->major_release
, ucode_vpd
->card_type
,
2600 ucode_vpd
->minor_release
[0],
2601 ucode_vpd
->minor_release
[1]);
2602 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
2606 static struct device_attribute ipr_fw_version_attr
= {
2608 .name
= "fw_version",
2611 .show
= ipr_show_fw_version
,
2615 * ipr_show_log_level - Show the adapter's error logging level
2616 * @dev: class device struct
2620 * number of bytes printed to buffer
2622 static ssize_t
ipr_show_log_level(struct device
*dev
,
2623 struct device_attribute
*attr
, char *buf
)
2625 struct Scsi_Host
*shost
= class_to_shost(dev
);
2626 struct ipr_ioa_cfg
*ioa_cfg
= (struct ipr_ioa_cfg
*)shost
->hostdata
;
2627 unsigned long lock_flags
= 0;
2630 spin_lock_irqsave(ioa_cfg
->host
->host_lock
, lock_flags
);
2631 len
= snprintf(buf
, PAGE_SIZE
, "%d\n", ioa_cfg
->log_level
);
2632 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
2637 * ipr_store_log_level - Change the adapter's error logging level
2638 * @dev: class device struct
2642 * number of bytes printed to buffer
2644 static ssize_t
ipr_store_log_level(struct device
*dev
,
2645 struct device_attribute
*attr
,
2646 const char *buf
, size_t count
)
2648 struct Scsi_Host
*shost
= class_to_shost(dev
);
2649 struct ipr_ioa_cfg
*ioa_cfg
= (struct ipr_ioa_cfg
*)shost
->hostdata
;
2650 unsigned long lock_flags
= 0;
2652 spin_lock_irqsave(ioa_cfg
->host
->host_lock
, lock_flags
);
2653 ioa_cfg
->log_level
= simple_strtoul(buf
, NULL
, 10);
2654 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
2658 static struct device_attribute ipr_log_level_attr
= {
2660 .name
= "log_level",
2661 .mode
= S_IRUGO
| S_IWUSR
,
2663 .show
= ipr_show_log_level
,
2664 .store
= ipr_store_log_level
2668 * ipr_store_diagnostics - IOA Diagnostics interface
2669 * @dev: device struct
2671 * @count: buffer size
2673 * This function will reset the adapter and wait a reasonable
2674 * amount of time for any errors that the adapter might log.
2677 * count on success / other on failure
2679 static ssize_t
ipr_store_diagnostics(struct device
*dev
,
2680 struct device_attribute
*attr
,
2681 const char *buf
, size_t count
)
2683 struct Scsi_Host
*shost
= class_to_shost(dev
);
2684 struct ipr_ioa_cfg
*ioa_cfg
= (struct ipr_ioa_cfg
*)shost
->hostdata
;
2685 unsigned long lock_flags
= 0;
2688 if (!capable(CAP_SYS_ADMIN
))
2691 spin_lock_irqsave(ioa_cfg
->host
->host_lock
, lock_flags
);
2692 while(ioa_cfg
->in_reset_reload
) {
2693 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
2694 wait_event(ioa_cfg
->reset_wait_q
, !ioa_cfg
->in_reset_reload
);
2695 spin_lock_irqsave(ioa_cfg
->host
->host_lock
, lock_flags
);
2698 ioa_cfg
->errors_logged
= 0;
2699 ipr_initiate_ioa_reset(ioa_cfg
, IPR_SHUTDOWN_NORMAL
);
2701 if (ioa_cfg
->in_reset_reload
) {
2702 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
2703 wait_event(ioa_cfg
->reset_wait_q
, !ioa_cfg
->in_reset_reload
);
2705 /* Wait for a second for any errors to be logged */
2708 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
2712 spin_lock_irqsave(ioa_cfg
->host
->host_lock
, lock_flags
);
2713 if (ioa_cfg
->in_reset_reload
|| ioa_cfg
->errors_logged
)
2715 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
2720 static struct device_attribute ipr_diagnostics_attr
= {
2722 .name
= "run_diagnostics",
2725 .store
= ipr_store_diagnostics
2729 * ipr_show_adapter_state - Show the adapter's state
2730 * @class_dev: device struct
2734 * number of bytes printed to buffer
2736 static ssize_t
ipr_show_adapter_state(struct device
*dev
,
2737 struct device_attribute
*attr
, char *buf
)
2739 struct Scsi_Host
*shost
= class_to_shost(dev
);
2740 struct ipr_ioa_cfg
*ioa_cfg
= (struct ipr_ioa_cfg
*)shost
->hostdata
;
2741 unsigned long lock_flags
= 0;
2744 spin_lock_irqsave(ioa_cfg
->host
->host_lock
, lock_flags
);
2745 if (ioa_cfg
->ioa_is_dead
)
2746 len
= snprintf(buf
, PAGE_SIZE
, "offline\n");
2748 len
= snprintf(buf
, PAGE_SIZE
, "online\n");
2749 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
2754 * ipr_store_adapter_state - Change adapter state
2755 * @dev: device struct
2757 * @count: buffer size
2759 * This function will change the adapter's state.
2762 * count on success / other on failure
2764 static ssize_t
ipr_store_adapter_state(struct device
*dev
,
2765 struct device_attribute
*attr
,
2766 const char *buf
, size_t count
)
2768 struct Scsi_Host
*shost
= class_to_shost(dev
);
2769 struct ipr_ioa_cfg
*ioa_cfg
= (struct ipr_ioa_cfg
*)shost
->hostdata
;
2770 unsigned long lock_flags
;
2773 if (!capable(CAP_SYS_ADMIN
))
2776 spin_lock_irqsave(ioa_cfg
->host
->host_lock
, lock_flags
);
2777 if (ioa_cfg
->ioa_is_dead
&& !strncmp(buf
, "online", 6)) {
2778 ioa_cfg
->ioa_is_dead
= 0;
2779 ioa_cfg
->reset_retries
= 0;
2780 ioa_cfg
->in_ioa_bringdown
= 0;
2781 ipr_initiate_ioa_reset(ioa_cfg
, IPR_SHUTDOWN_NONE
);
2783 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
2784 wait_event(ioa_cfg
->reset_wait_q
, !ioa_cfg
->in_reset_reload
);
2789 static struct device_attribute ipr_ioa_state_attr
= {
2791 .name
= "online_state",
2792 .mode
= S_IRUGO
| S_IWUSR
,
2794 .show
= ipr_show_adapter_state
,
2795 .store
= ipr_store_adapter_state
2799 * ipr_store_reset_adapter - Reset the adapter
2800 * @dev: device struct
2802 * @count: buffer size
2804 * This function will reset the adapter.
2807 * count on success / other on failure
2809 static ssize_t
ipr_store_reset_adapter(struct device
*dev
,
2810 struct device_attribute
*attr
,
2811 const char *buf
, size_t count
)
2813 struct Scsi_Host
*shost
= class_to_shost(dev
);
2814 struct ipr_ioa_cfg
*ioa_cfg
= (struct ipr_ioa_cfg
*)shost
->hostdata
;
2815 unsigned long lock_flags
;
2818 if (!capable(CAP_SYS_ADMIN
))
2821 spin_lock_irqsave(ioa_cfg
->host
->host_lock
, lock_flags
);
2822 if (!ioa_cfg
->in_reset_reload
)
2823 ipr_initiate_ioa_reset(ioa_cfg
, IPR_SHUTDOWN_NORMAL
);
2824 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
2825 wait_event(ioa_cfg
->reset_wait_q
, !ioa_cfg
->in_reset_reload
);
2830 static struct device_attribute ipr_ioa_reset_attr
= {
2832 .name
= "reset_host",
2835 .store
= ipr_store_reset_adapter
2839 * ipr_alloc_ucode_buffer - Allocates a microcode download buffer
2840 * @buf_len: buffer length
2842 * Allocates a DMA'able buffer in chunks and assembles a scatter/gather
2843 * list to use for microcode download
2846 * pointer to sglist / NULL on failure
2848 static struct ipr_sglist
*ipr_alloc_ucode_buffer(int buf_len
)
2850 int sg_size
, order
, bsize_elem
, num_elem
, i
, j
;
2851 struct ipr_sglist
*sglist
;
2852 struct scatterlist
*scatterlist
;
2855 /* Get the minimum size per scatter/gather element */
2856 sg_size
= buf_len
/ (IPR_MAX_SGLIST
- 1);
2858 /* Get the actual size per element */
2859 order
= get_order(sg_size
);
2861 /* Determine the actual number of bytes per element */
2862 bsize_elem
= PAGE_SIZE
* (1 << order
);
2864 /* Determine the actual number of sg entries needed */
2865 if (buf_len
% bsize_elem
)
2866 num_elem
= (buf_len
/ bsize_elem
) + 1;
2868 num_elem
= buf_len
/ bsize_elem
;
2870 /* Allocate a scatter/gather list for the DMA */
2871 sglist
= kzalloc(sizeof(struct ipr_sglist
) +
2872 (sizeof(struct scatterlist
) * (num_elem
- 1)),
2875 if (sglist
== NULL
) {
2880 scatterlist
= sglist
->scatterlist
;
2881 sg_init_table(scatterlist
, num_elem
);
2883 sglist
->order
= order
;
2884 sglist
->num_sg
= num_elem
;
2886 /* Allocate a bunch of sg elements */
2887 for (i
= 0; i
< num_elem
; i
++) {
2888 page
= alloc_pages(GFP_KERNEL
, order
);
2892 /* Free up what we already allocated */
2893 for (j
= i
- 1; j
>= 0; j
--)
2894 __free_pages(sg_page(&scatterlist
[j
]), order
);
2899 sg_set_page(&scatterlist
[i
], page
, 0, 0);
2906 * ipr_free_ucode_buffer - Frees a microcode download buffer
2907 * @p_dnld: scatter/gather list pointer
2909 * Free a DMA'able ucode download buffer previously allocated with
2910 * ipr_alloc_ucode_buffer
2915 static void ipr_free_ucode_buffer(struct ipr_sglist
*sglist
)
2919 for (i
= 0; i
< sglist
->num_sg
; i
++)
2920 __free_pages(sg_page(&sglist
->scatterlist
[i
]), sglist
->order
);
2926 * ipr_copy_ucode_buffer - Copy user buffer to kernel buffer
2927 * @sglist: scatter/gather list pointer
2928 * @buffer: buffer pointer
2929 * @len: buffer length
2931 * Copy a microcode image from a user buffer into a buffer allocated by
2932 * ipr_alloc_ucode_buffer
2935 * 0 on success / other on failure
2937 static int ipr_copy_ucode_buffer(struct ipr_sglist
*sglist
,
2938 u8
*buffer
, u32 len
)
2940 int bsize_elem
, i
, result
= 0;
2941 struct scatterlist
*scatterlist
;
2944 /* Determine the actual number of bytes per element */
2945 bsize_elem
= PAGE_SIZE
* (1 << sglist
->order
);
2947 scatterlist
= sglist
->scatterlist
;
2949 for (i
= 0; i
< (len
/ bsize_elem
); i
++, buffer
+= bsize_elem
) {
2950 struct page
*page
= sg_page(&scatterlist
[i
]);
2953 memcpy(kaddr
, buffer
, bsize_elem
);
2956 scatterlist
[i
].length
= bsize_elem
;
2964 if (len
% bsize_elem
) {
2965 struct page
*page
= sg_page(&scatterlist
[i
]);
2968 memcpy(kaddr
, buffer
, len
% bsize_elem
);
2971 scatterlist
[i
].length
= len
% bsize_elem
;
2974 sglist
->buffer_len
= len
;
2979 * ipr_build_ucode_ioadl - Build a microcode download IOADL
2980 * @ipr_cmd: ipr command struct
2981 * @sglist: scatter/gather list
2983 * Builds a microcode download IOA data list (IOADL).
2986 static void ipr_build_ucode_ioadl(struct ipr_cmnd
*ipr_cmd
,
2987 struct ipr_sglist
*sglist
)
2989 struct ipr_ioarcb
*ioarcb
= &ipr_cmd
->ioarcb
;
2990 struct ipr_ioadl_desc
*ioadl
= ipr_cmd
->ioadl
;
2991 struct scatterlist
*scatterlist
= sglist
->scatterlist
;
2994 ipr_cmd
->dma_use_sg
= sglist
->num_dma_sg
;
2995 ioarcb
->cmd_pkt
.flags_hi
|= IPR_FLAGS_HI_WRITE_NOT_READ
;
2996 ioarcb
->write_data_transfer_length
= cpu_to_be32(sglist
->buffer_len
);
2997 ioarcb
->write_ioadl_len
=
2998 cpu_to_be32(sizeof(struct ipr_ioadl_desc
) * ipr_cmd
->dma_use_sg
);
3000 for (i
= 0; i
< ipr_cmd
->dma_use_sg
; i
++) {
3001 ioadl
[i
].flags_and_data_len
=
3002 cpu_to_be32(IPR_IOADL_FLAGS_WRITE
| sg_dma_len(&scatterlist
[i
]));
3004 cpu_to_be32(sg_dma_address(&scatterlist
[i
]));
3007 ioadl
[i
-1].flags_and_data_len
|=
3008 cpu_to_be32(IPR_IOADL_FLAGS_LAST
);
3012 * ipr_update_ioa_ucode - Update IOA's microcode
3013 * @ioa_cfg: ioa config struct
3014 * @sglist: scatter/gather list
3016 * Initiate an adapter reset to update the IOA's microcode
3019 * 0 on success / -EIO on failure
3021 static int ipr_update_ioa_ucode(struct ipr_ioa_cfg
*ioa_cfg
,
3022 struct ipr_sglist
*sglist
)
3024 unsigned long lock_flags
;
3026 spin_lock_irqsave(ioa_cfg
->host
->host_lock
, lock_flags
);
3027 while(ioa_cfg
->in_reset_reload
) {
3028 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
3029 wait_event(ioa_cfg
->reset_wait_q
, !ioa_cfg
->in_reset_reload
);
3030 spin_lock_irqsave(ioa_cfg
->host
->host_lock
, lock_flags
);
3033 if (ioa_cfg
->ucode_sglist
) {
3034 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
3035 dev_err(&ioa_cfg
->pdev
->dev
,
3036 "Microcode download already in progress\n");
3040 sglist
->num_dma_sg
= pci_map_sg(ioa_cfg
->pdev
, sglist
->scatterlist
,
3041 sglist
->num_sg
, DMA_TO_DEVICE
);
3043 if (!sglist
->num_dma_sg
) {
3044 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
3045 dev_err(&ioa_cfg
->pdev
->dev
,
3046 "Failed to map microcode download buffer!\n");
3050 ioa_cfg
->ucode_sglist
= sglist
;
3051 ipr_initiate_ioa_reset(ioa_cfg
, IPR_SHUTDOWN_NORMAL
);
3052 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
3053 wait_event(ioa_cfg
->reset_wait_q
, !ioa_cfg
->in_reset_reload
);
3055 spin_lock_irqsave(ioa_cfg
->host
->host_lock
, lock_flags
);
3056 ioa_cfg
->ucode_sglist
= NULL
;
3057 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
3062 * ipr_store_update_fw - Update the firmware on the adapter
3063 * @class_dev: device struct
3065 * @count: buffer size
3067 * This function will update the firmware on the adapter.
3070 * count on success / other on failure
3072 static ssize_t
ipr_store_update_fw(struct device
*dev
,
3073 struct device_attribute
*attr
,
3074 const char *buf
, size_t count
)
3076 struct Scsi_Host
*shost
= class_to_shost(dev
);
3077 struct ipr_ioa_cfg
*ioa_cfg
= (struct ipr_ioa_cfg
*)shost
->hostdata
;
3078 struct ipr_ucode_image_header
*image_hdr
;
3079 const struct firmware
*fw_entry
;
3080 struct ipr_sglist
*sglist
;
3083 int len
, result
, dnld_size
;
3085 if (!capable(CAP_SYS_ADMIN
))
3088 len
= snprintf(fname
, 99, "%s", buf
);
3089 fname
[len
-1] = '\0';
3091 if(request_firmware(&fw_entry
, fname
, &ioa_cfg
->pdev
->dev
)) {
3092 dev_err(&ioa_cfg
->pdev
->dev
, "Firmware file %s not found\n", fname
);
3096 image_hdr
= (struct ipr_ucode_image_header
*)fw_entry
->data
;
3098 if (be32_to_cpu(image_hdr
->header_length
) > fw_entry
->size
||
3099 (ioa_cfg
->vpd_cbs
->page3_data
.card_type
&&
3100 ioa_cfg
->vpd_cbs
->page3_data
.card_type
!= image_hdr
->card_type
)) {
3101 dev_err(&ioa_cfg
->pdev
->dev
, "Invalid microcode buffer\n");
3102 release_firmware(fw_entry
);
3106 src
= (u8
*)image_hdr
+ be32_to_cpu(image_hdr
->header_length
);
3107 dnld_size
= fw_entry
->size
- be32_to_cpu(image_hdr
->header_length
);
3108 sglist
= ipr_alloc_ucode_buffer(dnld_size
);
3111 dev_err(&ioa_cfg
->pdev
->dev
, "Microcode buffer allocation failed\n");
3112 release_firmware(fw_entry
);
3116 result
= ipr_copy_ucode_buffer(sglist
, src
, dnld_size
);
3119 dev_err(&ioa_cfg
->pdev
->dev
,
3120 "Microcode buffer copy to DMA buffer failed\n");
3124 result
= ipr_update_ioa_ucode(ioa_cfg
, sglist
);
3129 ipr_free_ucode_buffer(sglist
);
3130 release_firmware(fw_entry
);
3134 static struct device_attribute ipr_update_fw_attr
= {
3136 .name
= "update_fw",
3139 .store
= ipr_store_update_fw
3142 static struct device_attribute
*ipr_ioa_attrs
[] = {
3143 &ipr_fw_version_attr
,
3144 &ipr_log_level_attr
,
3145 &ipr_diagnostics_attr
,
3146 &ipr_ioa_state_attr
,
3147 &ipr_ioa_reset_attr
,
3148 &ipr_update_fw_attr
,
3149 &ipr_ioa_cache_attr
,
3153 #ifdef CONFIG_SCSI_IPR_DUMP
3155 * ipr_read_dump - Dump the adapter
3156 * @kobj: kobject struct
3157 * @bin_attr: bin_attribute struct
3160 * @count: buffer size
3163 * number of bytes printed to buffer
3165 static ssize_t
ipr_read_dump(struct kobject
*kobj
,
3166 struct bin_attribute
*bin_attr
,
3167 char *buf
, loff_t off
, size_t count
)
3169 struct device
*cdev
= container_of(kobj
, struct device
, kobj
);
3170 struct Scsi_Host
*shost
= class_to_shost(cdev
);
3171 struct ipr_ioa_cfg
*ioa_cfg
= (struct ipr_ioa_cfg
*)shost
->hostdata
;
3172 struct ipr_dump
*dump
;
3173 unsigned long lock_flags
= 0;
3178 if (!capable(CAP_SYS_ADMIN
))
3181 spin_lock_irqsave(ioa_cfg
->host
->host_lock
, lock_flags
);
3182 dump
= ioa_cfg
->dump
;
3184 if (ioa_cfg
->sdt_state
!= DUMP_OBTAINED
|| !dump
) {
3185 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
3188 kref_get(&dump
->kref
);
3189 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
3191 if (off
> dump
->driver_dump
.hdr
.len
) {
3192 kref_put(&dump
->kref
, ipr_release_dump
);
3196 if (off
+ count
> dump
->driver_dump
.hdr
.len
) {
3197 count
= dump
->driver_dump
.hdr
.len
- off
;
3201 if (count
&& off
< sizeof(dump
->driver_dump
)) {
3202 if (off
+ count
> sizeof(dump
->driver_dump
))
3203 len
= sizeof(dump
->driver_dump
) - off
;
3206 src
= (u8
*)&dump
->driver_dump
+ off
;
3207 memcpy(buf
, src
, len
);
3213 off
-= sizeof(dump
->driver_dump
);
3215 if (count
&& off
< offsetof(struct ipr_ioa_dump
, ioa_data
)) {
3216 if (off
+ count
> offsetof(struct ipr_ioa_dump
, ioa_data
))
3217 len
= offsetof(struct ipr_ioa_dump
, ioa_data
) - off
;
3220 src
= (u8
*)&dump
->ioa_dump
+ off
;
3221 memcpy(buf
, src
, len
);
3227 off
-= offsetof(struct ipr_ioa_dump
, ioa_data
);
3230 if ((off
& PAGE_MASK
) != ((off
+ count
) & PAGE_MASK
))
3231 len
= PAGE_ALIGN(off
) - off
;
3234 src
= (u8
*)dump
->ioa_dump
.ioa_data
[(off
& PAGE_MASK
) >> PAGE_SHIFT
];
3235 src
+= off
& ~PAGE_MASK
;
3236 memcpy(buf
, src
, len
);
3242 kref_put(&dump
->kref
, ipr_release_dump
);
3247 * ipr_alloc_dump - Prepare for adapter dump
3248 * @ioa_cfg: ioa config struct
3251 * 0 on success / other on failure
3253 static int ipr_alloc_dump(struct ipr_ioa_cfg
*ioa_cfg
)
3255 struct ipr_dump
*dump
;
3256 unsigned long lock_flags
= 0;
3258 dump
= kzalloc(sizeof(struct ipr_dump
), GFP_KERNEL
);
3261 ipr_err("Dump memory allocation failed\n");
3265 kref_init(&dump
->kref
);
3266 dump
->ioa_cfg
= ioa_cfg
;
3268 spin_lock_irqsave(ioa_cfg
->host
->host_lock
, lock_flags
);
3270 if (INACTIVE
!= ioa_cfg
->sdt_state
) {
3271 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
3276 ioa_cfg
->dump
= dump
;
3277 ioa_cfg
->sdt_state
= WAIT_FOR_DUMP
;
3278 if (ioa_cfg
->ioa_is_dead
&& !ioa_cfg
->dump_taken
) {
3279 ioa_cfg
->dump_taken
= 1;
3280 schedule_work(&ioa_cfg
->work_q
);
3282 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
3288 * ipr_free_dump - Free adapter dump memory
3289 * @ioa_cfg: ioa config struct
3292 * 0 on success / other on failure
3294 static int ipr_free_dump(struct ipr_ioa_cfg
*ioa_cfg
)
3296 struct ipr_dump
*dump
;
3297 unsigned long lock_flags
= 0;
3301 spin_lock_irqsave(ioa_cfg
->host
->host_lock
, lock_flags
);
3302 dump
= ioa_cfg
->dump
;
3304 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
3308 ioa_cfg
->dump
= NULL
;
3309 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
3311 kref_put(&dump
->kref
, ipr_release_dump
);
3318 * ipr_write_dump - Setup dump state of adapter
3319 * @kobj: kobject struct
3320 * @bin_attr: bin_attribute struct
3323 * @count: buffer size
3326 * number of bytes printed to buffer
3328 static ssize_t
ipr_write_dump(struct kobject
*kobj
,
3329 struct bin_attribute
*bin_attr
,
3330 char *buf
, loff_t off
, size_t count
)
3332 struct device
*cdev
= container_of(kobj
, struct device
, kobj
);
3333 struct Scsi_Host
*shost
= class_to_shost(cdev
);
3334 struct ipr_ioa_cfg
*ioa_cfg
= (struct ipr_ioa_cfg
*)shost
->hostdata
;
3337 if (!capable(CAP_SYS_ADMIN
))
3341 rc
= ipr_alloc_dump(ioa_cfg
);
3342 else if (buf
[0] == '0')
3343 rc
= ipr_free_dump(ioa_cfg
);
3353 static struct bin_attribute ipr_dump_attr
= {
3356 .mode
= S_IRUSR
| S_IWUSR
,
3359 .read
= ipr_read_dump
,
3360 .write
= ipr_write_dump
3363 static int ipr_free_dump(struct ipr_ioa_cfg
*ioa_cfg
) { return 0; };
3367 * ipr_change_queue_depth - Change the device's queue depth
3368 * @sdev: scsi device struct
3369 * @qdepth: depth to set
3374 static int ipr_change_queue_depth(struct scsi_device
*sdev
, int qdepth
)
3376 struct ipr_ioa_cfg
*ioa_cfg
= (struct ipr_ioa_cfg
*)sdev
->host
->hostdata
;
3377 struct ipr_resource_entry
*res
;
3378 unsigned long lock_flags
= 0;
3380 spin_lock_irqsave(ioa_cfg
->host
->host_lock
, lock_flags
);
3381 res
= (struct ipr_resource_entry
*)sdev
->hostdata
;
3383 if (res
&& ipr_is_gata(res
) && qdepth
> IPR_MAX_CMD_PER_ATA_LUN
)
3384 qdepth
= IPR_MAX_CMD_PER_ATA_LUN
;
3385 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
3387 scsi_adjust_queue_depth(sdev
, scsi_get_tag_type(sdev
), qdepth
);
3388 return sdev
->queue_depth
;
3392 * ipr_change_queue_type - Change the device's queue type
3393 * @dsev: scsi device struct
3394 * @tag_type: type of tags to use
3397 * actual queue type set
3399 static int ipr_change_queue_type(struct scsi_device
*sdev
, int tag_type
)
3401 struct ipr_ioa_cfg
*ioa_cfg
= (struct ipr_ioa_cfg
*)sdev
->host
->hostdata
;
3402 struct ipr_resource_entry
*res
;
3403 unsigned long lock_flags
= 0;
3405 spin_lock_irqsave(ioa_cfg
->host
->host_lock
, lock_flags
);
3406 res
= (struct ipr_resource_entry
*)sdev
->hostdata
;
3409 if (ipr_is_gscsi(res
) && sdev
->tagged_supported
) {
3411 * We don't bother quiescing the device here since the
3412 * adapter firmware does it for us.
3414 scsi_set_tag_type(sdev
, tag_type
);
3417 scsi_activate_tcq(sdev
, sdev
->queue_depth
);
3419 scsi_deactivate_tcq(sdev
, sdev
->queue_depth
);
3425 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
3430 * ipr_show_adapter_handle - Show the adapter's resource handle for this device
3431 * @dev: device struct
3435 * number of bytes printed to buffer
3437 static ssize_t
ipr_show_adapter_handle(struct device
*dev
, struct device_attribute
*attr
, char *buf
)
3439 struct scsi_device
*sdev
= to_scsi_device(dev
);
3440 struct ipr_ioa_cfg
*ioa_cfg
= (struct ipr_ioa_cfg
*)sdev
->host
->hostdata
;
3441 struct ipr_resource_entry
*res
;
3442 unsigned long lock_flags
= 0;
3443 ssize_t len
= -ENXIO
;
3445 spin_lock_irqsave(ioa_cfg
->host
->host_lock
, lock_flags
);
3446 res
= (struct ipr_resource_entry
*)sdev
->hostdata
;
3448 len
= snprintf(buf
, PAGE_SIZE
, "%08X\n", res
->cfgte
.res_handle
);
3449 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
3453 static struct device_attribute ipr_adapter_handle_attr
= {
3455 .name
= "adapter_handle",
3458 .show
= ipr_show_adapter_handle
3461 static struct device_attribute
*ipr_dev_attrs
[] = {
3462 &ipr_adapter_handle_attr
,
3467 * ipr_biosparam - Return the HSC mapping
3468 * @sdev: scsi device struct
3469 * @block_device: block device pointer
3470 * @capacity: capacity of the device
3471 * @parm: Array containing returned HSC values.
3473 * This function generates the HSC parms that fdisk uses.
3474 * We want to make sure we return something that places partitions
3475 * on 4k boundaries for best performance with the IOA.
3480 static int ipr_biosparam(struct scsi_device
*sdev
,
3481 struct block_device
*block_device
,
3482 sector_t capacity
, int *parm
)
3490 cylinders
= capacity
;
3491 sector_div(cylinders
, (128 * 32));
3496 parm
[2] = cylinders
;
3502 * ipr_find_starget - Find target based on bus/target.
3503 * @starget: scsi target struct
3506 * resource entry pointer if found / NULL if not found
3508 static struct ipr_resource_entry
*ipr_find_starget(struct scsi_target
*starget
)
3510 struct Scsi_Host
*shost
= dev_to_shost(&starget
->dev
);
3511 struct ipr_ioa_cfg
*ioa_cfg
= (struct ipr_ioa_cfg
*) shost
->hostdata
;
3512 struct ipr_resource_entry
*res
;
3514 list_for_each_entry(res
, &ioa_cfg
->used_res_q
, queue
) {
3515 if ((res
->cfgte
.res_addr
.bus
== starget
->channel
) &&
3516 (res
->cfgte
.res_addr
.target
== starget
->id
) &&
3517 (res
->cfgte
.res_addr
.lun
== 0)) {
3525 static struct ata_port_info sata_port_info
;
3528 * ipr_target_alloc - Prepare for commands to a SCSI target
3529 * @starget: scsi target struct
3531 * If the device is a SATA device, this function allocates an
3532 * ATA port with libata, else it does nothing.
3535 * 0 on success / non-0 on failure
3537 static int ipr_target_alloc(struct scsi_target
*starget
)
3539 struct Scsi_Host
*shost
= dev_to_shost(&starget
->dev
);
3540 struct ipr_ioa_cfg
*ioa_cfg
= (struct ipr_ioa_cfg
*) shost
->hostdata
;
3541 struct ipr_sata_port
*sata_port
;
3542 struct ata_port
*ap
;
3543 struct ipr_resource_entry
*res
;
3544 unsigned long lock_flags
;
3546 spin_lock_irqsave(ioa_cfg
->host
->host_lock
, lock_flags
);
3547 res
= ipr_find_starget(starget
);
3548 starget
->hostdata
= NULL
;
3550 if (res
&& ipr_is_gata(res
)) {
3551 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
3552 sata_port
= kzalloc(sizeof(*sata_port
), GFP_KERNEL
);
3556 ap
= ata_sas_port_alloc(&ioa_cfg
->ata_host
, &sata_port_info
, shost
);
3558 spin_lock_irqsave(ioa_cfg
->host
->host_lock
, lock_flags
);
3559 sata_port
->ioa_cfg
= ioa_cfg
;
3561 sata_port
->res
= res
;
3563 res
->sata_port
= sata_port
;
3564 ap
->private_data
= sata_port
;
3565 starget
->hostdata
= sata_port
;
3571 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
3577 * ipr_target_destroy - Destroy a SCSI target
3578 * @starget: scsi target struct
3580 * If the device was a SATA device, this function frees the libata
3581 * ATA port, else it does nothing.
3584 static void ipr_target_destroy(struct scsi_target
*starget
)
3586 struct ipr_sata_port
*sata_port
= starget
->hostdata
;
3589 starget
->hostdata
= NULL
;
3590 ata_sas_port_destroy(sata_port
->ap
);
3596 * ipr_find_sdev - Find device based on bus/target/lun.
3597 * @sdev: scsi device struct
3600 * resource entry pointer if found / NULL if not found
3602 static struct ipr_resource_entry
*ipr_find_sdev(struct scsi_device
*sdev
)
3604 struct ipr_ioa_cfg
*ioa_cfg
= (struct ipr_ioa_cfg
*) sdev
->host
->hostdata
;
3605 struct ipr_resource_entry
*res
;
3607 list_for_each_entry(res
, &ioa_cfg
->used_res_q
, queue
) {
3608 if ((res
->cfgte
.res_addr
.bus
== sdev
->channel
) &&
3609 (res
->cfgte
.res_addr
.target
== sdev
->id
) &&
3610 (res
->cfgte
.res_addr
.lun
== sdev
->lun
))
3618 * ipr_slave_destroy - Unconfigure a SCSI device
3619 * @sdev: scsi device struct
3624 static void ipr_slave_destroy(struct scsi_device
*sdev
)
3626 struct ipr_resource_entry
*res
;
3627 struct ipr_ioa_cfg
*ioa_cfg
;
3628 unsigned long lock_flags
= 0;
3630 ioa_cfg
= (struct ipr_ioa_cfg
*) sdev
->host
->hostdata
;
3632 spin_lock_irqsave(ioa_cfg
->host
->host_lock
, lock_flags
);
3633 res
= (struct ipr_resource_entry
*) sdev
->hostdata
;
3636 ata_port_disable(res
->sata_port
->ap
);
3637 sdev
->hostdata
= NULL
;
3639 res
->sata_port
= NULL
;
3641 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
3645 * ipr_slave_configure - Configure a SCSI device
3646 * @sdev: scsi device struct
3648 * This function configures the specified scsi device.
3653 static int ipr_slave_configure(struct scsi_device
*sdev
)
3655 struct ipr_ioa_cfg
*ioa_cfg
= (struct ipr_ioa_cfg
*) sdev
->host
->hostdata
;
3656 struct ipr_resource_entry
*res
;
3657 unsigned long lock_flags
= 0;
3659 spin_lock_irqsave(ioa_cfg
->host
->host_lock
, lock_flags
);
3660 res
= sdev
->hostdata
;
3662 if (ipr_is_af_dasd_device(res
))
3663 sdev
->type
= TYPE_RAID
;
3664 if (ipr_is_af_dasd_device(res
) || ipr_is_ioa_resource(res
)) {
3665 sdev
->scsi_level
= 4;
3666 sdev
->no_uld_attach
= 1;
3668 if (ipr_is_vset_device(res
)) {
3669 blk_queue_rq_timeout(sdev
->request_queue
,
3670 IPR_VSET_RW_TIMEOUT
);
3671 blk_queue_max_sectors(sdev
->request_queue
, IPR_VSET_MAX_SECTORS
);
3673 if (ipr_is_vset_device(res
) || ipr_is_scsi_disk(res
))
3674 sdev
->allow_restart
= 1;
3675 if (ipr_is_gata(res
) && res
->sata_port
) {
3676 scsi_adjust_queue_depth(sdev
, 0, IPR_MAX_CMD_PER_ATA_LUN
);
3677 ata_sas_slave_configure(sdev
, res
->sata_port
->ap
);
3679 scsi_adjust_queue_depth(sdev
, 0, sdev
->host
->cmd_per_lun
);
3682 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
3687 * ipr_ata_slave_alloc - Prepare for commands to a SATA device
3688 * @sdev: scsi device struct
3690 * This function initializes an ATA port so that future commands
3691 * sent through queuecommand will work.
3696 static int ipr_ata_slave_alloc(struct scsi_device
*sdev
)
3698 struct ipr_sata_port
*sata_port
= NULL
;
3702 if (sdev
->sdev_target
)
3703 sata_port
= sdev
->sdev_target
->hostdata
;
3705 rc
= ata_sas_port_init(sata_port
->ap
);
3707 ipr_slave_destroy(sdev
);
3714 * ipr_slave_alloc - Prepare for commands to a device.
3715 * @sdev: scsi device struct
3717 * This function saves a pointer to the resource entry
3718 * in the scsi device struct if the device exists. We
3719 * can then use this pointer in ipr_queuecommand when
3720 * handling new commands.
3723 * 0 on success / -ENXIO if device does not exist
3725 static int ipr_slave_alloc(struct scsi_device
*sdev
)
3727 struct ipr_ioa_cfg
*ioa_cfg
= (struct ipr_ioa_cfg
*) sdev
->host
->hostdata
;
3728 struct ipr_resource_entry
*res
;
3729 unsigned long lock_flags
;
3732 sdev
->hostdata
= NULL
;
3734 spin_lock_irqsave(ioa_cfg
->host
->host_lock
, lock_flags
);
3736 res
= ipr_find_sdev(sdev
);
3741 sdev
->hostdata
= res
;
3742 if (!ipr_is_naca_model(res
))
3743 res
->needs_sync_complete
= 1;
3745 if (ipr_is_gata(res
)) {
3746 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
3747 return ipr_ata_slave_alloc(sdev
);
3751 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
3757 * ipr_eh_host_reset - Reset the host adapter
3758 * @scsi_cmd: scsi command struct
3763 static int __ipr_eh_host_reset(struct scsi_cmnd
* scsi_cmd
)
3765 struct ipr_ioa_cfg
*ioa_cfg
;
3769 ioa_cfg
= (struct ipr_ioa_cfg
*) scsi_cmd
->device
->host
->hostdata
;
3771 dev_err(&ioa_cfg
->pdev
->dev
,
3772 "Adapter being reset as a result of error recovery.\n");
3774 if (WAIT_FOR_DUMP
== ioa_cfg
->sdt_state
)
3775 ioa_cfg
->sdt_state
= GET_DUMP
;
3777 rc
= ipr_reset_reload(ioa_cfg
, IPR_SHUTDOWN_ABBREV
);
3783 static int ipr_eh_host_reset(struct scsi_cmnd
* cmd
)
3787 spin_lock_irq(cmd
->device
->host
->host_lock
);
3788 rc
= __ipr_eh_host_reset(cmd
);
3789 spin_unlock_irq(cmd
->device
->host
->host_lock
);
3795 * ipr_device_reset - Reset the device
3796 * @ioa_cfg: ioa config struct
3797 * @res: resource entry struct
3799 * This function issues a device reset to the affected device.
3800 * If the device is a SCSI device, a LUN reset will be sent
3801 * to the device first. If that does not work, a target reset
3802 * will be sent. If the device is a SATA device, a PHY reset will
3806 * 0 on success / non-zero on failure
3808 static int ipr_device_reset(struct ipr_ioa_cfg
*ioa_cfg
,
3809 struct ipr_resource_entry
*res
)
3811 struct ipr_cmnd
*ipr_cmd
;
3812 struct ipr_ioarcb
*ioarcb
;
3813 struct ipr_cmd_pkt
*cmd_pkt
;
3814 struct ipr_ioarcb_ata_regs
*regs
;
3818 ipr_cmd
= ipr_get_free_ipr_cmnd(ioa_cfg
);
3819 ioarcb
= &ipr_cmd
->ioarcb
;
3820 cmd_pkt
= &ioarcb
->cmd_pkt
;
3821 regs
= &ioarcb
->add_data
.u
.regs
;
3823 ioarcb
->res_handle
= res
->cfgte
.res_handle
;
3824 cmd_pkt
->request_type
= IPR_RQTYPE_IOACMD
;
3825 cmd_pkt
->cdb
[0] = IPR_RESET_DEVICE
;
3826 if (ipr_is_gata(res
)) {
3827 cmd_pkt
->cdb
[2] = IPR_ATA_PHY_RESET
;
3828 ioarcb
->add_cmd_parms_len
= cpu_to_be32(sizeof(regs
->flags
));
3829 regs
->flags
|= IPR_ATA_FLAG_STATUS_ON_GOOD_COMPLETION
;
3832 ipr_send_blocking_cmd(ipr_cmd
, ipr_timeout
, IPR_DEVICE_RESET_TIMEOUT
);
3833 ioasc
= be32_to_cpu(ipr_cmd
->ioasa
.ioasc
);
3834 list_add_tail(&ipr_cmd
->queue
, &ioa_cfg
->free_q
);
3835 if (ipr_is_gata(res
) && res
->sata_port
&& ioasc
!= IPR_IOASC_IOA_WAS_RESET
)
3836 memcpy(&res
->sata_port
->ioasa
, &ipr_cmd
->ioasa
.u
.gata
,
3837 sizeof(struct ipr_ioasa_gata
));
3840 return (IPR_IOASC_SENSE_KEY(ioasc
) ? -EIO
: 0);
3844 * ipr_sata_reset - Reset the SATA port
3845 * @link: SATA link to reset
3846 * @classes: class of the attached device
3848 * This function issues a SATA phy reset to the affected ATA link.
3851 * 0 on success / non-zero on failure
3853 static int ipr_sata_reset(struct ata_link
*link
, unsigned int *classes
,
3854 unsigned long deadline
)
3856 struct ipr_sata_port
*sata_port
= link
->ap
->private_data
;
3857 struct ipr_ioa_cfg
*ioa_cfg
= sata_port
->ioa_cfg
;
3858 struct ipr_resource_entry
*res
;
3859 unsigned long lock_flags
= 0;
3863 spin_lock_irqsave(ioa_cfg
->host
->host_lock
, lock_flags
);
3864 while(ioa_cfg
->in_reset_reload
) {
3865 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
3866 wait_event(ioa_cfg
->reset_wait_q
, !ioa_cfg
->in_reset_reload
);
3867 spin_lock_irqsave(ioa_cfg
->host
->host_lock
, lock_flags
);
3870 res
= sata_port
->res
;
3872 rc
= ipr_device_reset(ioa_cfg
, res
);
3873 switch(res
->cfgte
.proto
) {
3874 case IPR_PROTO_SATA
:
3875 case IPR_PROTO_SAS_STP
:
3876 *classes
= ATA_DEV_ATA
;
3878 case IPR_PROTO_SATA_ATAPI
:
3879 case IPR_PROTO_SAS_STP_ATAPI
:
3880 *classes
= ATA_DEV_ATAPI
;
3883 *classes
= ATA_DEV_UNKNOWN
;
3888 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
3894 * ipr_eh_dev_reset - Reset the device
3895 * @scsi_cmd: scsi command struct
3897 * This function issues a device reset to the affected device.
3898 * A LUN reset will be sent to the device first. If that does
3899 * not work, a target reset will be sent.
3904 static int __ipr_eh_dev_reset(struct scsi_cmnd
* scsi_cmd
)
3906 struct ipr_cmnd
*ipr_cmd
;
3907 struct ipr_ioa_cfg
*ioa_cfg
;
3908 struct ipr_resource_entry
*res
;
3909 struct ata_port
*ap
;
3913 ioa_cfg
= (struct ipr_ioa_cfg
*) scsi_cmd
->device
->host
->hostdata
;
3914 res
= scsi_cmd
->device
->hostdata
;
3920 * If we are currently going through reset/reload, return failed. This will force the
3921 * mid-layer to call ipr_eh_host_reset, which will then go to sleep and wait for the
3924 if (ioa_cfg
->in_reset_reload
)
3926 if (ioa_cfg
->ioa_is_dead
)
3929 list_for_each_entry(ipr_cmd
, &ioa_cfg
->pending_q
, queue
) {
3930 if (ipr_cmd
->ioarcb
.res_handle
== res
->cfgte
.res_handle
) {
3931 if (ipr_cmd
->scsi_cmd
)
3932 ipr_cmd
->done
= ipr_scsi_eh_done
;
3934 ipr_cmd
->done
= ipr_sata_eh_done
;
3935 if (ipr_cmd
->qc
&& !(ipr_cmd
->qc
->flags
& ATA_QCFLAG_FAILED
)) {
3936 ipr_cmd
->qc
->err_mask
|= AC_ERR_TIMEOUT
;
3937 ipr_cmd
->qc
->flags
|= ATA_QCFLAG_FAILED
;
3942 res
->resetting_device
= 1;
3943 scmd_printk(KERN_ERR
, scsi_cmd
, "Resetting device\n");
3945 if (ipr_is_gata(res
) && res
->sata_port
) {
3946 ap
= res
->sata_port
->ap
;
3947 spin_unlock_irq(scsi_cmd
->device
->host
->host_lock
);
3948 ata_std_error_handler(ap
);
3949 spin_lock_irq(scsi_cmd
->device
->host
->host_lock
);
3951 list_for_each_entry(ipr_cmd
, &ioa_cfg
->pending_q
, queue
) {
3952 if (ipr_cmd
->ioarcb
.res_handle
== res
->cfgte
.res_handle
) {
3958 rc
= ipr_device_reset(ioa_cfg
, res
);
3959 res
->resetting_device
= 0;
3962 return (rc
? FAILED
: SUCCESS
);
3965 static int ipr_eh_dev_reset(struct scsi_cmnd
* cmd
)
3969 spin_lock_irq(cmd
->device
->host
->host_lock
);
3970 rc
= __ipr_eh_dev_reset(cmd
);
3971 spin_unlock_irq(cmd
->device
->host
->host_lock
);
3977 * ipr_bus_reset_done - Op done function for bus reset.
3978 * @ipr_cmd: ipr command struct
3980 * This function is the op done function for a bus reset
3985 static void ipr_bus_reset_done(struct ipr_cmnd
*ipr_cmd
)
3987 struct ipr_ioa_cfg
*ioa_cfg
= ipr_cmd
->ioa_cfg
;
3988 struct ipr_resource_entry
*res
;
3991 list_for_each_entry(res
, &ioa_cfg
->used_res_q
, queue
) {
3992 if (!memcmp(&res
->cfgte
.res_handle
, &ipr_cmd
->ioarcb
.res_handle
,
3993 sizeof(res
->cfgte
.res_handle
))) {
3994 scsi_report_bus_reset(ioa_cfg
->host
, res
->cfgte
.res_addr
.bus
);
4000 * If abort has not completed, indicate the reset has, else call the
4001 * abort's done function to wake the sleeping eh thread
4003 if (ipr_cmd
->sibling
->sibling
)
4004 ipr_cmd
->sibling
->sibling
= NULL
;
4006 ipr_cmd
->sibling
->done(ipr_cmd
->sibling
);
4008 list_add_tail(&ipr_cmd
->queue
, &ioa_cfg
->free_q
);
4013 * ipr_abort_timeout - An abort task has timed out
4014 * @ipr_cmd: ipr command struct
4016 * This function handles when an abort task times out. If this
4017 * happens we issue a bus reset since we have resources tied
4018 * up that must be freed before returning to the midlayer.
4023 static void ipr_abort_timeout(struct ipr_cmnd
*ipr_cmd
)
4025 struct ipr_cmnd
*reset_cmd
;
4026 struct ipr_ioa_cfg
*ioa_cfg
= ipr_cmd
->ioa_cfg
;
4027 struct ipr_cmd_pkt
*cmd_pkt
;
4028 unsigned long lock_flags
= 0;
4031 spin_lock_irqsave(ioa_cfg
->host
->host_lock
, lock_flags
);
4032 if (ipr_cmd
->completion
.done
|| ioa_cfg
->in_reset_reload
) {
4033 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
4037 sdev_printk(KERN_ERR
, ipr_cmd
->u
.sdev
, "Abort timed out. Resetting bus.\n");
4038 reset_cmd
= ipr_get_free_ipr_cmnd(ioa_cfg
);
4039 ipr_cmd
->sibling
= reset_cmd
;
4040 reset_cmd
->sibling
= ipr_cmd
;
4041 reset_cmd
->ioarcb
.res_handle
= ipr_cmd
->ioarcb
.res_handle
;
4042 cmd_pkt
= &reset_cmd
->ioarcb
.cmd_pkt
;
4043 cmd_pkt
->request_type
= IPR_RQTYPE_IOACMD
;
4044 cmd_pkt
->cdb
[0] = IPR_RESET_DEVICE
;
4045 cmd_pkt
->cdb
[2] = IPR_RESET_TYPE_SELECT
| IPR_BUS_RESET
;
4047 ipr_do_req(reset_cmd
, ipr_bus_reset_done
, ipr_timeout
, IPR_DEVICE_RESET_TIMEOUT
);
4048 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
4053 * ipr_cancel_op - Cancel specified op
4054 * @scsi_cmd: scsi command struct
4056 * This function cancels specified op.
4061 static int ipr_cancel_op(struct scsi_cmnd
* scsi_cmd
)
4063 struct ipr_cmnd
*ipr_cmd
;
4064 struct ipr_ioa_cfg
*ioa_cfg
;
4065 struct ipr_resource_entry
*res
;
4066 struct ipr_cmd_pkt
*cmd_pkt
;
4071 ioa_cfg
= (struct ipr_ioa_cfg
*)scsi_cmd
->device
->host
->hostdata
;
4072 res
= scsi_cmd
->device
->hostdata
;
4074 /* If we are currently going through reset/reload, return failed.
4075 * This will force the mid-layer to call ipr_eh_host_reset,
4076 * which will then go to sleep and wait for the reset to complete
4078 if (ioa_cfg
->in_reset_reload
|| ioa_cfg
->ioa_is_dead
)
4080 if (!res
|| !ipr_is_gscsi(res
))
4083 list_for_each_entry(ipr_cmd
, &ioa_cfg
->pending_q
, queue
) {
4084 if (ipr_cmd
->scsi_cmd
== scsi_cmd
) {
4085 ipr_cmd
->done
= ipr_scsi_eh_done
;
4094 ipr_cmd
= ipr_get_free_ipr_cmnd(ioa_cfg
);
4095 ipr_cmd
->ioarcb
.res_handle
= res
->cfgte
.res_handle
;
4096 cmd_pkt
= &ipr_cmd
->ioarcb
.cmd_pkt
;
4097 cmd_pkt
->request_type
= IPR_RQTYPE_IOACMD
;
4098 cmd_pkt
->cdb
[0] = IPR_CANCEL_ALL_REQUESTS
;
4099 ipr_cmd
->u
.sdev
= scsi_cmd
->device
;
4101 scmd_printk(KERN_ERR
, scsi_cmd
, "Aborting command: %02X\n",
4103 ipr_send_blocking_cmd(ipr_cmd
, ipr_abort_timeout
, IPR_CANCEL_ALL_TIMEOUT
);
4104 ioasc
= be32_to_cpu(ipr_cmd
->ioasa
.ioasc
);
4107 * If the abort task timed out and we sent a bus reset, we will get
4108 * one the following responses to the abort
4110 if (ioasc
== IPR_IOASC_BUS_WAS_RESET
|| ioasc
== IPR_IOASC_SYNC_REQUIRED
) {
4115 list_add_tail(&ipr_cmd
->queue
, &ioa_cfg
->free_q
);
4116 if (!ipr_is_naca_model(res
))
4117 res
->needs_sync_complete
= 1;
4120 return (IPR_IOASC_SENSE_KEY(ioasc
) ? FAILED
: SUCCESS
);
4124 * ipr_eh_abort - Abort a single op
4125 * @scsi_cmd: scsi command struct
4130 static int ipr_eh_abort(struct scsi_cmnd
* scsi_cmd
)
4132 unsigned long flags
;
4137 spin_lock_irqsave(scsi_cmd
->device
->host
->host_lock
, flags
);
4138 rc
= ipr_cancel_op(scsi_cmd
);
4139 spin_unlock_irqrestore(scsi_cmd
->device
->host
->host_lock
, flags
);
4146 * ipr_handle_other_interrupt - Handle "other" interrupts
4147 * @ioa_cfg: ioa config struct
4148 * @int_reg: interrupt register
4151 * IRQ_NONE / IRQ_HANDLED
4153 static irqreturn_t
ipr_handle_other_interrupt(struct ipr_ioa_cfg
*ioa_cfg
,
4154 volatile u32 int_reg
)
4156 irqreturn_t rc
= IRQ_HANDLED
;
4158 if (int_reg
& IPR_PCII_IOA_TRANS_TO_OPER
) {
4159 /* Mask the interrupt */
4160 writel(IPR_PCII_IOA_TRANS_TO_OPER
, ioa_cfg
->regs
.set_interrupt_mask_reg
);
4162 /* Clear the interrupt */
4163 writel(IPR_PCII_IOA_TRANS_TO_OPER
, ioa_cfg
->regs
.clr_interrupt_reg
);
4164 int_reg
= readl(ioa_cfg
->regs
.sense_interrupt_reg
);
4166 list_del(&ioa_cfg
->reset_cmd
->queue
);
4167 del_timer(&ioa_cfg
->reset_cmd
->timer
);
4168 ipr_reset_ioa_job(ioa_cfg
->reset_cmd
);
4170 if (int_reg
& IPR_PCII_IOA_UNIT_CHECKED
)
4171 ioa_cfg
->ioa_unit_checked
= 1;
4173 dev_err(&ioa_cfg
->pdev
->dev
,
4174 "Permanent IOA failure. 0x%08X\n", int_reg
);
4176 if (WAIT_FOR_DUMP
== ioa_cfg
->sdt_state
)
4177 ioa_cfg
->sdt_state
= GET_DUMP
;
4179 ipr_mask_and_clear_interrupts(ioa_cfg
, ~0);
4180 ipr_initiate_ioa_reset(ioa_cfg
, IPR_SHUTDOWN_NONE
);
4187 * ipr_isr - Interrupt service routine
4189 * @devp: pointer to ioa config struct
4192 * IRQ_NONE / IRQ_HANDLED
4194 static irqreturn_t
ipr_isr(int irq
, void *devp
)
4196 struct ipr_ioa_cfg
*ioa_cfg
= (struct ipr_ioa_cfg
*)devp
;
4197 unsigned long lock_flags
= 0;
4198 volatile u32 int_reg
, int_mask_reg
;
4201 struct ipr_cmnd
*ipr_cmd
;
4202 irqreturn_t rc
= IRQ_NONE
;
4204 spin_lock_irqsave(ioa_cfg
->host
->host_lock
, lock_flags
);
4206 /* If interrupts are disabled, ignore the interrupt */
4207 if (!ioa_cfg
->allow_interrupts
) {
4208 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
4212 int_mask_reg
= readl(ioa_cfg
->regs
.sense_interrupt_mask_reg
);
4213 int_reg
= readl(ioa_cfg
->regs
.sense_interrupt_reg
) & ~int_mask_reg
;
4215 /* If an interrupt on the adapter did not occur, ignore it */
4216 if (unlikely((int_reg
& IPR_PCII_OPER_INTERRUPTS
) == 0)) {
4217 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
4224 while ((be32_to_cpu(*ioa_cfg
->hrrq_curr
) & IPR_HRRQ_TOGGLE_BIT
) ==
4225 ioa_cfg
->toggle_bit
) {
4227 cmd_index
= (be32_to_cpu(*ioa_cfg
->hrrq_curr
) &
4228 IPR_HRRQ_REQ_RESP_HANDLE_MASK
) >> IPR_HRRQ_REQ_RESP_HANDLE_SHIFT
;
4230 if (unlikely(cmd_index
>= IPR_NUM_CMD_BLKS
)) {
4231 ioa_cfg
->errors_logged
++;
4232 dev_err(&ioa_cfg
->pdev
->dev
, "Invalid response handle from IOA\n");
4234 if (WAIT_FOR_DUMP
== ioa_cfg
->sdt_state
)
4235 ioa_cfg
->sdt_state
= GET_DUMP
;
4237 ipr_initiate_ioa_reset(ioa_cfg
, IPR_SHUTDOWN_NONE
);
4238 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
4242 ipr_cmd
= ioa_cfg
->ipr_cmnd_list
[cmd_index
];
4244 ioasc
= be32_to_cpu(ipr_cmd
->ioasa
.ioasc
);
4246 ipr_trc_hook(ipr_cmd
, IPR_TRACE_FINISH
, ioasc
);
4248 list_del(&ipr_cmd
->queue
);
4249 del_timer(&ipr_cmd
->timer
);
4250 ipr_cmd
->done(ipr_cmd
);
4254 if (ioa_cfg
->hrrq_curr
< ioa_cfg
->hrrq_end
) {
4255 ioa_cfg
->hrrq_curr
++;
4257 ioa_cfg
->hrrq_curr
= ioa_cfg
->hrrq_start
;
4258 ioa_cfg
->toggle_bit
^= 1u;
4262 if (ipr_cmd
!= NULL
) {
4263 /* Clear the PCI interrupt */
4264 writel(IPR_PCII_HRRQ_UPDATED
, ioa_cfg
->regs
.clr_interrupt_reg
);
4265 int_reg
= readl(ioa_cfg
->regs
.sense_interrupt_reg
) & ~int_mask_reg
;
4270 if (unlikely(rc
== IRQ_NONE
))
4271 rc
= ipr_handle_other_interrupt(ioa_cfg
, int_reg
);
4273 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
4278 * ipr_build_ioadl - Build a scatter/gather list and map the buffer
4279 * @ioa_cfg: ioa config struct
4280 * @ipr_cmd: ipr command struct
4283 * 0 on success / -1 on failure
4285 static int ipr_build_ioadl(struct ipr_ioa_cfg
*ioa_cfg
,
4286 struct ipr_cmnd
*ipr_cmd
)
4289 struct scatterlist
*sg
;
4291 u32 ioadl_flags
= 0;
4292 struct scsi_cmnd
*scsi_cmd
= ipr_cmd
->scsi_cmd
;
4293 struct ipr_ioarcb
*ioarcb
= &ipr_cmd
->ioarcb
;
4294 struct ipr_ioadl_desc
*ioadl
= ipr_cmd
->ioadl
;
4296 length
= scsi_bufflen(scsi_cmd
);
4300 nseg
= scsi_dma_map(scsi_cmd
);
4302 dev_err(&ioa_cfg
->pdev
->dev
, "pci_map_sg failed!\n");
4306 ipr_cmd
->dma_use_sg
= nseg
;
4308 if (scsi_cmd
->sc_data_direction
== DMA_TO_DEVICE
) {
4309 ioadl_flags
= IPR_IOADL_FLAGS_WRITE
;
4310 ioarcb
->cmd_pkt
.flags_hi
|= IPR_FLAGS_HI_WRITE_NOT_READ
;
4311 ioarcb
->write_data_transfer_length
= cpu_to_be32(length
);
4312 ioarcb
->write_ioadl_len
=
4313 cpu_to_be32(sizeof(struct ipr_ioadl_desc
) * ipr_cmd
->dma_use_sg
);
4314 } else if (scsi_cmd
->sc_data_direction
== DMA_FROM_DEVICE
) {
4315 ioadl_flags
= IPR_IOADL_FLAGS_READ
;
4316 ioarcb
->read_data_transfer_length
= cpu_to_be32(length
);
4317 ioarcb
->read_ioadl_len
=
4318 cpu_to_be32(sizeof(struct ipr_ioadl_desc
) * ipr_cmd
->dma_use_sg
);
4321 if (ipr_cmd
->dma_use_sg
<= ARRAY_SIZE(ioarcb
->add_data
.u
.ioadl
)) {
4322 ioadl
= ioarcb
->add_data
.u
.ioadl
;
4323 ioarcb
->write_ioadl_addr
=
4324 cpu_to_be32(be32_to_cpu(ioarcb
->ioarcb_host_pci_addr
) +
4325 offsetof(struct ipr_ioarcb
, add_data
));
4326 ioarcb
->read_ioadl_addr
= ioarcb
->write_ioadl_addr
;
4329 scsi_for_each_sg(scsi_cmd
, sg
, ipr_cmd
->dma_use_sg
, i
) {
4330 ioadl
[i
].flags_and_data_len
=
4331 cpu_to_be32(ioadl_flags
| sg_dma_len(sg
));
4332 ioadl
[i
].address
= cpu_to_be32(sg_dma_address(sg
));
4335 ioadl
[i
-1].flags_and_data_len
|= cpu_to_be32(IPR_IOADL_FLAGS_LAST
);
4340 * ipr_get_task_attributes - Translate SPI Q-Tag to task attributes
4341 * @scsi_cmd: scsi command struct
4346 static u8
ipr_get_task_attributes(struct scsi_cmnd
*scsi_cmd
)
4349 u8 rc
= IPR_FLAGS_LO_UNTAGGED_TASK
;
4351 if (scsi_populate_tag_msg(scsi_cmd
, tag
)) {
4353 case MSG_SIMPLE_TAG
:
4354 rc
= IPR_FLAGS_LO_SIMPLE_TASK
;
4357 rc
= IPR_FLAGS_LO_HEAD_OF_Q_TASK
;
4359 case MSG_ORDERED_TAG
:
4360 rc
= IPR_FLAGS_LO_ORDERED_TASK
;
4369 * ipr_erp_done - Process completion of ERP for a device
4370 * @ipr_cmd: ipr command struct
4372 * This function copies the sense buffer into the scsi_cmd
4373 * struct and pushes the scsi_done function.
4378 static void ipr_erp_done(struct ipr_cmnd
*ipr_cmd
)
4380 struct scsi_cmnd
*scsi_cmd
= ipr_cmd
->scsi_cmd
;
4381 struct ipr_resource_entry
*res
= scsi_cmd
->device
->hostdata
;
4382 struct ipr_ioa_cfg
*ioa_cfg
= ipr_cmd
->ioa_cfg
;
4383 u32 ioasc
= be32_to_cpu(ipr_cmd
->ioasa
.ioasc
);
4385 if (IPR_IOASC_SENSE_KEY(ioasc
) > 0) {
4386 scsi_cmd
->result
|= (DID_ERROR
<< 16);
4387 scmd_printk(KERN_ERR
, scsi_cmd
,
4388 "Request Sense failed with IOASC: 0x%08X\n", ioasc
);
4390 memcpy(scsi_cmd
->sense_buffer
, ipr_cmd
->sense_buffer
,
4391 SCSI_SENSE_BUFFERSIZE
);
4395 if (!ipr_is_naca_model(res
))
4396 res
->needs_sync_complete
= 1;
4399 scsi_dma_unmap(ipr_cmd
->scsi_cmd
);
4400 list_add_tail(&ipr_cmd
->queue
, &ioa_cfg
->free_q
);
4401 scsi_cmd
->scsi_done(scsi_cmd
);
4405 * ipr_reinit_ipr_cmnd_for_erp - Re-initialize a cmnd block to be used for ERP
4406 * @ipr_cmd: ipr command struct
4411 static void ipr_reinit_ipr_cmnd_for_erp(struct ipr_cmnd
*ipr_cmd
)
4413 struct ipr_ioarcb
*ioarcb
= &ipr_cmd
->ioarcb
;
4414 struct ipr_ioasa
*ioasa
= &ipr_cmd
->ioasa
;
4415 dma_addr_t dma_addr
= be32_to_cpu(ioarcb
->ioarcb_host_pci_addr
);
4417 memset(&ioarcb
->cmd_pkt
, 0, sizeof(struct ipr_cmd_pkt
));
4418 ioarcb
->write_data_transfer_length
= 0;
4419 ioarcb
->read_data_transfer_length
= 0;
4420 ioarcb
->write_ioadl_len
= 0;
4421 ioarcb
->read_ioadl_len
= 0;
4423 ioasa
->residual_data_len
= 0;
4424 ioarcb
->write_ioadl_addr
=
4425 cpu_to_be32(dma_addr
+ offsetof(struct ipr_cmnd
, ioadl
));
4426 ioarcb
->read_ioadl_addr
= ioarcb
->write_ioadl_addr
;
4430 * ipr_erp_request_sense - Send request sense to a device
4431 * @ipr_cmd: ipr command struct
4433 * This function sends a request sense to a device as a result
4434 * of a check condition.
4439 static void ipr_erp_request_sense(struct ipr_cmnd
*ipr_cmd
)
4441 struct ipr_cmd_pkt
*cmd_pkt
= &ipr_cmd
->ioarcb
.cmd_pkt
;
4442 u32 ioasc
= be32_to_cpu(ipr_cmd
->ioasa
.ioasc
);
4444 if (IPR_IOASC_SENSE_KEY(ioasc
) > 0) {
4445 ipr_erp_done(ipr_cmd
);
4449 ipr_reinit_ipr_cmnd_for_erp(ipr_cmd
);
4451 cmd_pkt
->request_type
= IPR_RQTYPE_SCSICDB
;
4452 cmd_pkt
->cdb
[0] = REQUEST_SENSE
;
4453 cmd_pkt
->cdb
[4] = SCSI_SENSE_BUFFERSIZE
;
4454 cmd_pkt
->flags_hi
|= IPR_FLAGS_HI_SYNC_OVERRIDE
;
4455 cmd_pkt
->flags_hi
|= IPR_FLAGS_HI_NO_ULEN_CHK
;
4456 cmd_pkt
->timeout
= cpu_to_be16(IPR_REQUEST_SENSE_TIMEOUT
/ HZ
);
4458 ipr_cmd
->ioadl
[0].flags_and_data_len
=
4459 cpu_to_be32(IPR_IOADL_FLAGS_READ_LAST
| SCSI_SENSE_BUFFERSIZE
);
4460 ipr_cmd
->ioadl
[0].address
=
4461 cpu_to_be32(ipr_cmd
->sense_buffer_dma
);
4463 ipr_cmd
->ioarcb
.read_ioadl_len
=
4464 cpu_to_be32(sizeof(struct ipr_ioadl_desc
));
4465 ipr_cmd
->ioarcb
.read_data_transfer_length
=
4466 cpu_to_be32(SCSI_SENSE_BUFFERSIZE
);
4468 ipr_do_req(ipr_cmd
, ipr_erp_done
, ipr_timeout
,
4469 IPR_REQUEST_SENSE_TIMEOUT
* 2);
4473 * ipr_erp_cancel_all - Send cancel all to a device
4474 * @ipr_cmd: ipr command struct
4476 * This function sends a cancel all to a device to clear the
4477 * queue. If we are running TCQ on the device, QERR is set to 1,
4478 * which means all outstanding ops have been dropped on the floor.
4479 * Cancel all will return them to us.
4484 static void ipr_erp_cancel_all(struct ipr_cmnd
*ipr_cmd
)
4486 struct scsi_cmnd
*scsi_cmd
= ipr_cmd
->scsi_cmd
;
4487 struct ipr_resource_entry
*res
= scsi_cmd
->device
->hostdata
;
4488 struct ipr_cmd_pkt
*cmd_pkt
;
4492 ipr_reinit_ipr_cmnd_for_erp(ipr_cmd
);
4494 if (!scsi_get_tag_type(scsi_cmd
->device
)) {
4495 ipr_erp_request_sense(ipr_cmd
);
4499 cmd_pkt
= &ipr_cmd
->ioarcb
.cmd_pkt
;
4500 cmd_pkt
->request_type
= IPR_RQTYPE_IOACMD
;
4501 cmd_pkt
->cdb
[0] = IPR_CANCEL_ALL_REQUESTS
;
4503 ipr_do_req(ipr_cmd
, ipr_erp_request_sense
, ipr_timeout
,
4504 IPR_CANCEL_ALL_TIMEOUT
);
4508 * ipr_dump_ioasa - Dump contents of IOASA
4509 * @ioa_cfg: ioa config struct
4510 * @ipr_cmd: ipr command struct
4511 * @res: resource entry struct
4513 * This function is invoked by the interrupt handler when ops
4514 * fail. It will log the IOASA if appropriate. Only called
4520 static void ipr_dump_ioasa(struct ipr_ioa_cfg
*ioa_cfg
,
4521 struct ipr_cmnd
*ipr_cmd
, struct ipr_resource_entry
*res
)
4525 u32 ioasc
, fd_ioasc
;
4526 struct ipr_ioasa
*ioasa
= &ipr_cmd
->ioasa
;
4527 __be32
*ioasa_data
= (__be32
*)ioasa
;
4530 ioasc
= be32_to_cpu(ioasa
->ioasc
) & IPR_IOASC_IOASC_MASK
;
4531 fd_ioasc
= be32_to_cpu(ioasa
->fd_ioasc
) & IPR_IOASC_IOASC_MASK
;
4536 if (ioa_cfg
->log_level
< IPR_DEFAULT_LOG_LEVEL
)
4539 if (ioasc
== IPR_IOASC_BUS_WAS_RESET
&& fd_ioasc
)
4540 error_index
= ipr_get_error(fd_ioasc
);
4542 error_index
= ipr_get_error(ioasc
);
4544 if (ioa_cfg
->log_level
< IPR_MAX_LOG_LEVEL
) {
4545 /* Don't log an error if the IOA already logged one */
4546 if (ioasa
->ilid
!= 0)
4549 if (!ipr_is_gscsi(res
))
4552 if (ipr_error_table
[error_index
].log_ioasa
== 0)
4556 ipr_res_err(ioa_cfg
, res
, "%s\n", ipr_error_table
[error_index
].error
);
4558 if (sizeof(struct ipr_ioasa
) < be16_to_cpu(ioasa
->ret_stat_len
))
4559 data_len
= sizeof(struct ipr_ioasa
);
4561 data_len
= be16_to_cpu(ioasa
->ret_stat_len
);
4563 ipr_err("IOASA Dump:\n");
4565 for (i
= 0; i
< data_len
/ 4; i
+= 4) {
4566 ipr_err("%08X: %08X %08X %08X %08X\n", i
*4,
4567 be32_to_cpu(ioasa_data
[i
]),
4568 be32_to_cpu(ioasa_data
[i
+1]),
4569 be32_to_cpu(ioasa_data
[i
+2]),
4570 be32_to_cpu(ioasa_data
[i
+3]));
4575 * ipr_gen_sense - Generate SCSI sense data from an IOASA
4577 * @sense_buf: sense data buffer
4582 static void ipr_gen_sense(struct ipr_cmnd
*ipr_cmd
)
4585 u8
*sense_buf
= ipr_cmd
->scsi_cmd
->sense_buffer
;
4586 struct ipr_resource_entry
*res
= ipr_cmd
->scsi_cmd
->device
->hostdata
;
4587 struct ipr_ioasa
*ioasa
= &ipr_cmd
->ioasa
;
4588 u32 ioasc
= be32_to_cpu(ioasa
->ioasc
);
4590 memset(sense_buf
, 0, SCSI_SENSE_BUFFERSIZE
);
4592 if (ioasc
>= IPR_FIRST_DRIVER_IOASC
)
4595 ipr_cmd
->scsi_cmd
->result
= SAM_STAT_CHECK_CONDITION
;
4597 if (ipr_is_vset_device(res
) &&
4598 ioasc
== IPR_IOASC_MED_DO_NOT_REALLOC
&&
4599 ioasa
->u
.vset
.failing_lba_hi
!= 0) {
4600 sense_buf
[0] = 0x72;
4601 sense_buf
[1] = IPR_IOASC_SENSE_KEY(ioasc
);
4602 sense_buf
[2] = IPR_IOASC_SENSE_CODE(ioasc
);
4603 sense_buf
[3] = IPR_IOASC_SENSE_QUAL(ioasc
);
4607 sense_buf
[9] = 0x0A;
4608 sense_buf
[10] = 0x80;
4610 failing_lba
= be32_to_cpu(ioasa
->u
.vset
.failing_lba_hi
);
4612 sense_buf
[12] = (failing_lba
& 0xff000000) >> 24;
4613 sense_buf
[13] = (failing_lba
& 0x00ff0000) >> 16;
4614 sense_buf
[14] = (failing_lba
& 0x0000ff00) >> 8;
4615 sense_buf
[15] = failing_lba
& 0x000000ff;
4617 failing_lba
= be32_to_cpu(ioasa
->u
.vset
.failing_lba_lo
);
4619 sense_buf
[16] = (failing_lba
& 0xff000000) >> 24;
4620 sense_buf
[17] = (failing_lba
& 0x00ff0000) >> 16;
4621 sense_buf
[18] = (failing_lba
& 0x0000ff00) >> 8;
4622 sense_buf
[19] = failing_lba
& 0x000000ff;
4624 sense_buf
[0] = 0x70;
4625 sense_buf
[2] = IPR_IOASC_SENSE_KEY(ioasc
);
4626 sense_buf
[12] = IPR_IOASC_SENSE_CODE(ioasc
);
4627 sense_buf
[13] = IPR_IOASC_SENSE_QUAL(ioasc
);
4629 /* Illegal request */
4630 if ((IPR_IOASC_SENSE_KEY(ioasc
) == 0x05) &&
4631 (be32_to_cpu(ioasa
->ioasc_specific
) & IPR_FIELD_POINTER_VALID
)) {
4632 sense_buf
[7] = 10; /* additional length */
4634 /* IOARCB was in error */
4635 if (IPR_IOASC_SENSE_CODE(ioasc
) == 0x24)
4636 sense_buf
[15] = 0xC0;
4637 else /* Parameter data was invalid */
4638 sense_buf
[15] = 0x80;
4641 ((IPR_FIELD_POINTER_MASK
&
4642 be32_to_cpu(ioasa
->ioasc_specific
)) >> 8) & 0xff;
4644 (IPR_FIELD_POINTER_MASK
&
4645 be32_to_cpu(ioasa
->ioasc_specific
)) & 0xff;
4647 if (ioasc
== IPR_IOASC_MED_DO_NOT_REALLOC
) {
4648 if (ipr_is_vset_device(res
))
4649 failing_lba
= be32_to_cpu(ioasa
->u
.vset
.failing_lba_lo
);
4651 failing_lba
= be32_to_cpu(ioasa
->u
.dasd
.failing_lba
);
4653 sense_buf
[0] |= 0x80; /* Or in the Valid bit */
4654 sense_buf
[3] = (failing_lba
& 0xff000000) >> 24;
4655 sense_buf
[4] = (failing_lba
& 0x00ff0000) >> 16;
4656 sense_buf
[5] = (failing_lba
& 0x0000ff00) >> 8;
4657 sense_buf
[6] = failing_lba
& 0x000000ff;
4660 sense_buf
[7] = 6; /* additional length */
4666 * ipr_get_autosense - Copy autosense data to sense buffer
4667 * @ipr_cmd: ipr command struct
4669 * This function copies the autosense buffer to the buffer
4670 * in the scsi_cmd, if there is autosense available.
4673 * 1 if autosense was available / 0 if not
4675 static int ipr_get_autosense(struct ipr_cmnd
*ipr_cmd
)
4677 struct ipr_ioasa
*ioasa
= &ipr_cmd
->ioasa
;
4679 if ((be32_to_cpu(ioasa
->ioasc_specific
) & IPR_AUTOSENSE_VALID
) == 0)
4682 memcpy(ipr_cmd
->scsi_cmd
->sense_buffer
, ioasa
->auto_sense
.data
,
4683 min_t(u16
, be16_to_cpu(ioasa
->auto_sense
.auto_sense_len
),
4684 SCSI_SENSE_BUFFERSIZE
));
4689 * ipr_erp_start - Process an error response for a SCSI op
4690 * @ioa_cfg: ioa config struct
4691 * @ipr_cmd: ipr command struct
4693 * This function determines whether or not to initiate ERP
4694 * on the affected device.
4699 static void ipr_erp_start(struct ipr_ioa_cfg
*ioa_cfg
,
4700 struct ipr_cmnd
*ipr_cmd
)
4702 struct scsi_cmnd
*scsi_cmd
= ipr_cmd
->scsi_cmd
;
4703 struct ipr_resource_entry
*res
= scsi_cmd
->device
->hostdata
;
4704 u32 ioasc
= be32_to_cpu(ipr_cmd
->ioasa
.ioasc
);
4705 u32 masked_ioasc
= ioasc
& IPR_IOASC_IOASC_MASK
;
4708 ipr_scsi_eh_done(ipr_cmd
);
4712 if (!ipr_is_gscsi(res
) && masked_ioasc
!= IPR_IOASC_HW_DEV_BUS_STATUS
)
4713 ipr_gen_sense(ipr_cmd
);
4715 ipr_dump_ioasa(ioa_cfg
, ipr_cmd
, res
);
4717 switch (masked_ioasc
) {
4718 case IPR_IOASC_ABORTED_CMD_TERM_BY_HOST
:
4719 if (ipr_is_naca_model(res
))
4720 scsi_cmd
->result
|= (DID_ABORT
<< 16);
4722 scsi_cmd
->result
|= (DID_IMM_RETRY
<< 16);
4724 case IPR_IOASC_IR_RESOURCE_HANDLE
:
4725 case IPR_IOASC_IR_NO_CMDS_TO_2ND_IOA
:
4726 scsi_cmd
->result
|= (DID_NO_CONNECT
<< 16);
4728 case IPR_IOASC_HW_SEL_TIMEOUT
:
4729 scsi_cmd
->result
|= (DID_NO_CONNECT
<< 16);
4730 if (!ipr_is_naca_model(res
))
4731 res
->needs_sync_complete
= 1;
4733 case IPR_IOASC_SYNC_REQUIRED
:
4735 res
->needs_sync_complete
= 1;
4736 scsi_cmd
->result
|= (DID_IMM_RETRY
<< 16);
4738 case IPR_IOASC_MED_DO_NOT_REALLOC
: /* prevent retries */
4739 case IPR_IOASA_IR_DUAL_IOA_DISABLED
:
4740 scsi_cmd
->result
|= (DID_PASSTHROUGH
<< 16);
4742 case IPR_IOASC_BUS_WAS_RESET
:
4743 case IPR_IOASC_BUS_WAS_RESET_BY_OTHER
:
4745 * Report the bus reset and ask for a retry. The device
4746 * will give CC/UA the next command.
4748 if (!res
->resetting_device
)
4749 scsi_report_bus_reset(ioa_cfg
->host
, scsi_cmd
->device
->channel
);
4750 scsi_cmd
->result
|= (DID_ERROR
<< 16);
4751 if (!ipr_is_naca_model(res
))
4752 res
->needs_sync_complete
= 1;
4754 case IPR_IOASC_HW_DEV_BUS_STATUS
:
4755 scsi_cmd
->result
|= IPR_IOASC_SENSE_STATUS(ioasc
);
4756 if (IPR_IOASC_SENSE_STATUS(ioasc
) == SAM_STAT_CHECK_CONDITION
) {
4757 if (!ipr_get_autosense(ipr_cmd
)) {
4758 if (!ipr_is_naca_model(res
)) {
4759 ipr_erp_cancel_all(ipr_cmd
);
4764 if (!ipr_is_naca_model(res
))
4765 res
->needs_sync_complete
= 1;
4767 case IPR_IOASC_NR_INIT_CMD_REQUIRED
:
4770 if (IPR_IOASC_SENSE_KEY(ioasc
) > RECOVERED_ERROR
)
4771 scsi_cmd
->result
|= (DID_ERROR
<< 16);
4772 if (!ipr_is_vset_device(res
) && !ipr_is_naca_model(res
))
4773 res
->needs_sync_complete
= 1;
4777 scsi_dma_unmap(ipr_cmd
->scsi_cmd
);
4778 list_add_tail(&ipr_cmd
->queue
, &ioa_cfg
->free_q
);
4779 scsi_cmd
->scsi_done(scsi_cmd
);
4783 * ipr_scsi_done - mid-layer done function
4784 * @ipr_cmd: ipr command struct
4786 * This function is invoked by the interrupt handler for
4787 * ops generated by the SCSI mid-layer
4792 static void ipr_scsi_done(struct ipr_cmnd
*ipr_cmd
)
4794 struct ipr_ioa_cfg
*ioa_cfg
= ipr_cmd
->ioa_cfg
;
4795 struct scsi_cmnd
*scsi_cmd
= ipr_cmd
->scsi_cmd
;
4796 u32 ioasc
= be32_to_cpu(ipr_cmd
->ioasa
.ioasc
);
4798 scsi_set_resid(scsi_cmd
, be32_to_cpu(ipr_cmd
->ioasa
.residual_data_len
));
4800 if (likely(IPR_IOASC_SENSE_KEY(ioasc
) == 0)) {
4801 scsi_dma_unmap(ipr_cmd
->scsi_cmd
);
4802 list_add_tail(&ipr_cmd
->queue
, &ioa_cfg
->free_q
);
4803 scsi_cmd
->scsi_done(scsi_cmd
);
4805 ipr_erp_start(ioa_cfg
, ipr_cmd
);
4809 * ipr_queuecommand - Queue a mid-layer request
4810 * @scsi_cmd: scsi command struct
4811 * @done: done function
4813 * This function queues a request generated by the mid-layer.
4817 * SCSI_MLQUEUE_DEVICE_BUSY if device is busy
4818 * SCSI_MLQUEUE_HOST_BUSY if host is busy
4820 static int ipr_queuecommand(struct scsi_cmnd
*scsi_cmd
,
4821 void (*done
) (struct scsi_cmnd
*))
4823 struct ipr_ioa_cfg
*ioa_cfg
;
4824 struct ipr_resource_entry
*res
;
4825 struct ipr_ioarcb
*ioarcb
;
4826 struct ipr_cmnd
*ipr_cmd
;
4829 scsi_cmd
->scsi_done
= done
;
4830 ioa_cfg
= (struct ipr_ioa_cfg
*)scsi_cmd
->device
->host
->hostdata
;
4831 res
= scsi_cmd
->device
->hostdata
;
4832 scsi_cmd
->result
= (DID_OK
<< 16);
4835 * We are currently blocking all devices due to a host reset
4836 * We have told the host to stop giving us new requests, but
4837 * ERP ops don't count. FIXME
4839 if (unlikely(!ioa_cfg
->allow_cmds
&& !ioa_cfg
->ioa_is_dead
))
4840 return SCSI_MLQUEUE_HOST_BUSY
;
4843 * FIXME - Create scsi_set_host_offline interface
4844 * and the ioa_is_dead check can be removed
4846 if (unlikely(ioa_cfg
->ioa_is_dead
|| !res
)) {
4847 memset(scsi_cmd
->sense_buffer
, 0, SCSI_SENSE_BUFFERSIZE
);
4848 scsi_cmd
->result
= (DID_NO_CONNECT
<< 16);
4849 scsi_cmd
->scsi_done(scsi_cmd
);
4853 if (ipr_is_gata(res
) && res
->sata_port
)
4854 return ata_sas_queuecmd(scsi_cmd
, done
, res
->sata_port
->ap
);
4856 ipr_cmd
= ipr_get_free_ipr_cmnd(ioa_cfg
);
4857 ioarcb
= &ipr_cmd
->ioarcb
;
4858 list_add_tail(&ipr_cmd
->queue
, &ioa_cfg
->pending_q
);
4860 memcpy(ioarcb
->cmd_pkt
.cdb
, scsi_cmd
->cmnd
, scsi_cmd
->cmd_len
);
4861 ipr_cmd
->scsi_cmd
= scsi_cmd
;
4862 ioarcb
->res_handle
= res
->cfgte
.res_handle
;
4863 ipr_cmd
->done
= ipr_scsi_done
;
4864 ipr_trc_hook(ipr_cmd
, IPR_TRACE_START
, IPR_GET_PHYS_LOC(res
->cfgte
.res_addr
));
4866 if (ipr_is_gscsi(res
) || ipr_is_vset_device(res
)) {
4867 if (scsi_cmd
->underflow
== 0)
4868 ioarcb
->cmd_pkt
.flags_hi
|= IPR_FLAGS_HI_NO_ULEN_CHK
;
4870 if (res
->needs_sync_complete
) {
4871 ioarcb
->cmd_pkt
.flags_hi
|= IPR_FLAGS_HI_SYNC_COMPLETE
;
4872 res
->needs_sync_complete
= 0;
4875 ioarcb
->cmd_pkt
.flags_hi
|= IPR_FLAGS_HI_NO_LINK_DESC
;
4876 ioarcb
->cmd_pkt
.flags_lo
|= IPR_FLAGS_LO_DELAY_AFTER_RST
;
4877 ioarcb
->cmd_pkt
.flags_lo
|= IPR_FLAGS_LO_ALIGNED_BFR
;
4878 ioarcb
->cmd_pkt
.flags_lo
|= ipr_get_task_attributes(scsi_cmd
);
4881 if (scsi_cmd
->cmnd
[0] >= 0xC0 &&
4882 (!ipr_is_gscsi(res
) || scsi_cmd
->cmnd
[0] == IPR_QUERY_RSRC_STATE
))
4883 ioarcb
->cmd_pkt
.request_type
= IPR_RQTYPE_IOACMD
;
4885 if (likely(rc
== 0))
4886 rc
= ipr_build_ioadl(ioa_cfg
, ipr_cmd
);
4888 if (likely(rc
== 0)) {
4890 writel(be32_to_cpu(ipr_cmd
->ioarcb
.ioarcb_host_pci_addr
),
4891 ioa_cfg
->regs
.ioarrin_reg
);
4893 list_move_tail(&ipr_cmd
->queue
, &ioa_cfg
->free_q
);
4894 return SCSI_MLQUEUE_HOST_BUSY
;
4901 * ipr_ioctl - IOCTL handler
4902 * @sdev: scsi device struct
4907 * 0 on success / other on failure
4909 static int ipr_ioctl(struct scsi_device
*sdev
, int cmd
, void __user
*arg
)
4911 struct ipr_resource_entry
*res
;
4913 res
= (struct ipr_resource_entry
*)sdev
->hostdata
;
4914 if (res
&& ipr_is_gata(res
)) {
4915 if (cmd
== HDIO_GET_IDENTITY
)
4917 return ata_sas_scsi_ioctl(res
->sata_port
->ap
, sdev
, cmd
, arg
);
4924 * ipr_info - Get information about the card/driver
4925 * @scsi_host: scsi host struct
4928 * pointer to buffer with description string
4930 static const char * ipr_ioa_info(struct Scsi_Host
*host
)
4932 static char buffer
[512];
4933 struct ipr_ioa_cfg
*ioa_cfg
;
4934 unsigned long lock_flags
= 0;
4936 ioa_cfg
= (struct ipr_ioa_cfg
*) host
->hostdata
;
4938 spin_lock_irqsave(host
->host_lock
, lock_flags
);
4939 sprintf(buffer
, "IBM %X Storage Adapter", ioa_cfg
->type
);
4940 spin_unlock_irqrestore(host
->host_lock
, lock_flags
);
4945 static struct scsi_host_template driver_template
= {
4946 .module
= THIS_MODULE
,
4948 .info
= ipr_ioa_info
,
4950 .queuecommand
= ipr_queuecommand
,
4951 .eh_abort_handler
= ipr_eh_abort
,
4952 .eh_device_reset_handler
= ipr_eh_dev_reset
,
4953 .eh_host_reset_handler
= ipr_eh_host_reset
,
4954 .slave_alloc
= ipr_slave_alloc
,
4955 .slave_configure
= ipr_slave_configure
,
4956 .slave_destroy
= ipr_slave_destroy
,
4957 .target_alloc
= ipr_target_alloc
,
4958 .target_destroy
= ipr_target_destroy
,
4959 .change_queue_depth
= ipr_change_queue_depth
,
4960 .change_queue_type
= ipr_change_queue_type
,
4961 .bios_param
= ipr_biosparam
,
4962 .can_queue
= IPR_MAX_COMMANDS
,
4964 .sg_tablesize
= IPR_MAX_SGLIST
,
4965 .max_sectors
= IPR_IOA_MAX_SECTORS
,
4966 .cmd_per_lun
= IPR_MAX_CMD_PER_LUN
,
4967 .use_clustering
= ENABLE_CLUSTERING
,
4968 .shost_attrs
= ipr_ioa_attrs
,
4969 .sdev_attrs
= ipr_dev_attrs
,
4970 .proc_name
= IPR_NAME
4974 * ipr_ata_phy_reset - libata phy_reset handler
4975 * @ap: ata port to reset
4978 static void ipr_ata_phy_reset(struct ata_port
*ap
)
4980 unsigned long flags
;
4981 struct ipr_sata_port
*sata_port
= ap
->private_data
;
4982 struct ipr_resource_entry
*res
= sata_port
->res
;
4983 struct ipr_ioa_cfg
*ioa_cfg
= sata_port
->ioa_cfg
;
4987 spin_lock_irqsave(ioa_cfg
->host
->host_lock
, flags
);
4988 while(ioa_cfg
->in_reset_reload
) {
4989 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, flags
);
4990 wait_event(ioa_cfg
->reset_wait_q
, !ioa_cfg
->in_reset_reload
);
4991 spin_lock_irqsave(ioa_cfg
->host
->host_lock
, flags
);
4994 if (!ioa_cfg
->allow_cmds
)
4997 rc
= ipr_device_reset(ioa_cfg
, res
);
5000 ata_port_disable(ap
);
5004 switch(res
->cfgte
.proto
) {
5005 case IPR_PROTO_SATA
:
5006 case IPR_PROTO_SAS_STP
:
5007 ap
->link
.device
[0].class = ATA_DEV_ATA
;
5009 case IPR_PROTO_SATA_ATAPI
:
5010 case IPR_PROTO_SAS_STP_ATAPI
:
5011 ap
->link
.device
[0].class = ATA_DEV_ATAPI
;
5014 ap
->link
.device
[0].class = ATA_DEV_UNKNOWN
;
5015 ata_port_disable(ap
);
5020 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, flags
);
5025 * ipr_ata_post_internal - Cleanup after an internal command
5026 * @qc: ATA queued command
5031 static void ipr_ata_post_internal(struct ata_queued_cmd
*qc
)
5033 struct ipr_sata_port
*sata_port
= qc
->ap
->private_data
;
5034 struct ipr_ioa_cfg
*ioa_cfg
= sata_port
->ioa_cfg
;
5035 struct ipr_cmnd
*ipr_cmd
;
5036 unsigned long flags
;
5038 spin_lock_irqsave(ioa_cfg
->host
->host_lock
, flags
);
5039 while(ioa_cfg
->in_reset_reload
) {
5040 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, flags
);
5041 wait_event(ioa_cfg
->reset_wait_q
, !ioa_cfg
->in_reset_reload
);
5042 spin_lock_irqsave(ioa_cfg
->host
->host_lock
, flags
);
5045 list_for_each_entry(ipr_cmd
, &ioa_cfg
->pending_q
, queue
) {
5046 if (ipr_cmd
->qc
== qc
) {
5047 ipr_device_reset(ioa_cfg
, sata_port
->res
);
5051 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, flags
);
5055 * ipr_copy_sata_tf - Copy a SATA taskfile to an IOA data structure
5056 * @regs: destination
5057 * @tf: source ATA taskfile
5062 static void ipr_copy_sata_tf(struct ipr_ioarcb_ata_regs
*regs
,
5063 struct ata_taskfile
*tf
)
5065 regs
->feature
= tf
->feature
;
5066 regs
->nsect
= tf
->nsect
;
5067 regs
->lbal
= tf
->lbal
;
5068 regs
->lbam
= tf
->lbam
;
5069 regs
->lbah
= tf
->lbah
;
5070 regs
->device
= tf
->device
;
5071 regs
->command
= tf
->command
;
5072 regs
->hob_feature
= tf
->hob_feature
;
5073 regs
->hob_nsect
= tf
->hob_nsect
;
5074 regs
->hob_lbal
= tf
->hob_lbal
;
5075 regs
->hob_lbam
= tf
->hob_lbam
;
5076 regs
->hob_lbah
= tf
->hob_lbah
;
5077 regs
->ctl
= tf
->ctl
;
5081 * ipr_sata_done - done function for SATA commands
5082 * @ipr_cmd: ipr command struct
5084 * This function is invoked by the interrupt handler for
5085 * ops generated by the SCSI mid-layer to SATA devices
5090 static void ipr_sata_done(struct ipr_cmnd
*ipr_cmd
)
5092 struct ipr_ioa_cfg
*ioa_cfg
= ipr_cmd
->ioa_cfg
;
5093 struct ata_queued_cmd
*qc
= ipr_cmd
->qc
;
5094 struct ipr_sata_port
*sata_port
= qc
->ap
->private_data
;
5095 struct ipr_resource_entry
*res
= sata_port
->res
;
5096 u32 ioasc
= be32_to_cpu(ipr_cmd
->ioasa
.ioasc
);
5098 memcpy(&sata_port
->ioasa
, &ipr_cmd
->ioasa
.u
.gata
,
5099 sizeof(struct ipr_ioasa_gata
));
5100 ipr_dump_ioasa(ioa_cfg
, ipr_cmd
, res
);
5102 if (be32_to_cpu(ipr_cmd
->ioasa
.ioasc_specific
) & IPR_ATA_DEVICE_WAS_RESET
)
5103 scsi_report_device_reset(ioa_cfg
->host
, res
->cfgte
.res_addr
.bus
,
5104 res
->cfgte
.res_addr
.target
);
5106 if (IPR_IOASC_SENSE_KEY(ioasc
) > RECOVERED_ERROR
)
5107 qc
->err_mask
|= __ac_err_mask(ipr_cmd
->ioasa
.u
.gata
.status
);
5109 qc
->err_mask
|= ac_err_mask(ipr_cmd
->ioasa
.u
.gata
.status
);
5110 list_add_tail(&ipr_cmd
->queue
, &ioa_cfg
->free_q
);
5111 ata_qc_complete(qc
);
5115 * ipr_build_ata_ioadl - Build an ATA scatter/gather list
5116 * @ipr_cmd: ipr command struct
5117 * @qc: ATA queued command
5120 static void ipr_build_ata_ioadl(struct ipr_cmnd
*ipr_cmd
,
5121 struct ata_queued_cmd
*qc
)
5123 u32 ioadl_flags
= 0;
5124 struct ipr_ioarcb
*ioarcb
= &ipr_cmd
->ioarcb
;
5125 struct ipr_ioadl_desc
*ioadl
= ipr_cmd
->ioadl
;
5126 struct ipr_ioadl_desc
*last_ioadl
= NULL
;
5127 int len
= qc
->nbytes
;
5128 struct scatterlist
*sg
;
5134 if (qc
->dma_dir
== DMA_TO_DEVICE
) {
5135 ioadl_flags
= IPR_IOADL_FLAGS_WRITE
;
5136 ioarcb
->cmd_pkt
.flags_hi
|= IPR_FLAGS_HI_WRITE_NOT_READ
;
5137 ioarcb
->write_data_transfer_length
= cpu_to_be32(len
);
5138 ioarcb
->write_ioadl_len
=
5139 cpu_to_be32(sizeof(struct ipr_ioadl_desc
) * ipr_cmd
->dma_use_sg
);
5140 } else if (qc
->dma_dir
== DMA_FROM_DEVICE
) {
5141 ioadl_flags
= IPR_IOADL_FLAGS_READ
;
5142 ioarcb
->read_data_transfer_length
= cpu_to_be32(len
);
5143 ioarcb
->read_ioadl_len
=
5144 cpu_to_be32(sizeof(struct ipr_ioadl_desc
) * ipr_cmd
->dma_use_sg
);
5147 for_each_sg(qc
->sg
, sg
, qc
->n_elem
, si
) {
5148 ioadl
->flags_and_data_len
= cpu_to_be32(ioadl_flags
| sg_dma_len(sg
));
5149 ioadl
->address
= cpu_to_be32(sg_dma_address(sg
));
5155 if (likely(last_ioadl
))
5156 last_ioadl
->flags_and_data_len
|= cpu_to_be32(IPR_IOADL_FLAGS_LAST
);
5160 * ipr_qc_issue - Issue a SATA qc to a device
5161 * @qc: queued command
5166 static unsigned int ipr_qc_issue(struct ata_queued_cmd
*qc
)
5168 struct ata_port
*ap
= qc
->ap
;
5169 struct ipr_sata_port
*sata_port
= ap
->private_data
;
5170 struct ipr_resource_entry
*res
= sata_port
->res
;
5171 struct ipr_ioa_cfg
*ioa_cfg
= sata_port
->ioa_cfg
;
5172 struct ipr_cmnd
*ipr_cmd
;
5173 struct ipr_ioarcb
*ioarcb
;
5174 struct ipr_ioarcb_ata_regs
*regs
;
5176 if (unlikely(!ioa_cfg
->allow_cmds
|| ioa_cfg
->ioa_is_dead
))
5177 return AC_ERR_SYSTEM
;
5179 ipr_cmd
= ipr_get_free_ipr_cmnd(ioa_cfg
);
5180 ioarcb
= &ipr_cmd
->ioarcb
;
5181 regs
= &ioarcb
->add_data
.u
.regs
;
5183 memset(&ioarcb
->add_data
, 0, sizeof(ioarcb
->add_data
));
5184 ioarcb
->add_cmd_parms_len
= cpu_to_be32(sizeof(ioarcb
->add_data
.u
.regs
));
5186 list_add_tail(&ipr_cmd
->queue
, &ioa_cfg
->pending_q
);
5188 ipr_cmd
->done
= ipr_sata_done
;
5189 ipr_cmd
->ioarcb
.res_handle
= res
->cfgte
.res_handle
;
5190 ioarcb
->cmd_pkt
.request_type
= IPR_RQTYPE_ATA_PASSTHRU
;
5191 ioarcb
->cmd_pkt
.flags_hi
|= IPR_FLAGS_HI_NO_LINK_DESC
;
5192 ioarcb
->cmd_pkt
.flags_hi
|= IPR_FLAGS_HI_NO_ULEN_CHK
;
5193 ipr_cmd
->dma_use_sg
= qc
->n_elem
;
5195 ipr_build_ata_ioadl(ipr_cmd
, qc
);
5196 regs
->flags
|= IPR_ATA_FLAG_STATUS_ON_GOOD_COMPLETION
;
5197 ipr_copy_sata_tf(regs
, &qc
->tf
);
5198 memcpy(ioarcb
->cmd_pkt
.cdb
, qc
->cdb
, IPR_MAX_CDB_LEN
);
5199 ipr_trc_hook(ipr_cmd
, IPR_TRACE_START
, IPR_GET_PHYS_LOC(res
->cfgte
.res_addr
));
5201 switch (qc
->tf
.protocol
) {
5202 case ATA_PROT_NODATA
:
5207 regs
->flags
|= IPR_ATA_FLAG_XFER_TYPE_DMA
;
5210 case ATAPI_PROT_PIO
:
5211 case ATAPI_PROT_NODATA
:
5212 regs
->flags
|= IPR_ATA_FLAG_PACKET_CMD
;
5215 case ATAPI_PROT_DMA
:
5216 regs
->flags
|= IPR_ATA_FLAG_PACKET_CMD
;
5217 regs
->flags
|= IPR_ATA_FLAG_XFER_TYPE_DMA
;
5222 return AC_ERR_INVALID
;
5226 writel(be32_to_cpu(ioarcb
->ioarcb_host_pci_addr
),
5227 ioa_cfg
->regs
.ioarrin_reg
);
5232 * ipr_qc_fill_rtf - Read result TF
5233 * @qc: ATA queued command
5238 static bool ipr_qc_fill_rtf(struct ata_queued_cmd
*qc
)
5240 struct ipr_sata_port
*sata_port
= qc
->ap
->private_data
;
5241 struct ipr_ioasa_gata
*g
= &sata_port
->ioasa
;
5242 struct ata_taskfile
*tf
= &qc
->result_tf
;
5244 tf
->feature
= g
->error
;
5245 tf
->nsect
= g
->nsect
;
5249 tf
->device
= g
->device
;
5250 tf
->command
= g
->status
;
5251 tf
->hob_nsect
= g
->hob_nsect
;
5252 tf
->hob_lbal
= g
->hob_lbal
;
5253 tf
->hob_lbam
= g
->hob_lbam
;
5254 tf
->hob_lbah
= g
->hob_lbah
;
5255 tf
->ctl
= g
->alt_status
;
5260 static struct ata_port_operations ipr_sata_ops
= {
5261 .phy_reset
= ipr_ata_phy_reset
,
5262 .hardreset
= ipr_sata_reset
,
5263 .post_internal_cmd
= ipr_ata_post_internal
,
5264 .qc_prep
= ata_noop_qc_prep
,
5265 .qc_issue
= ipr_qc_issue
,
5266 .qc_fill_rtf
= ipr_qc_fill_rtf
,
5267 .port_start
= ata_sas_port_start
,
5268 .port_stop
= ata_sas_port_stop
5271 static struct ata_port_info sata_port_info
= {
5272 .flags
= ATA_FLAG_SATA
| ATA_FLAG_NO_LEGACY
| ATA_FLAG_SATA_RESET
|
5273 ATA_FLAG_MMIO
| ATA_FLAG_PIO_DMA
,
5274 .pio_mask
= 0x10, /* pio4 */
5276 .udma_mask
= 0x7f, /* udma0-6 */
5277 .port_ops
= &ipr_sata_ops
5280 #ifdef CONFIG_PPC_PSERIES
5281 static const u16 ipr_blocked_processors
[] = {
5293 * ipr_invalid_adapter - Determine if this adapter is supported on this hardware
5294 * @ioa_cfg: ioa cfg struct
5296 * Adapters that use Gemstone revision < 3.1 do not work reliably on
5297 * certain pSeries hardware. This function determines if the given
5298 * adapter is in one of these confgurations or not.
5301 * 1 if adapter is not supported / 0 if adapter is supported
5303 static int ipr_invalid_adapter(struct ipr_ioa_cfg
*ioa_cfg
)
5307 if ((ioa_cfg
->type
== 0x5702) && (ioa_cfg
->pdev
->revision
< 4)) {
5308 for (i
= 0; i
< ARRAY_SIZE(ipr_blocked_processors
); i
++){
5309 if (__is_processor(ipr_blocked_processors
[i
]))
5316 #define ipr_invalid_adapter(ioa_cfg) 0
5320 * ipr_ioa_bringdown_done - IOA bring down completion.
5321 * @ipr_cmd: ipr command struct
5323 * This function processes the completion of an adapter bring down.
5324 * It wakes any reset sleepers.
5329 static int ipr_ioa_bringdown_done(struct ipr_cmnd
*ipr_cmd
)
5331 struct ipr_ioa_cfg
*ioa_cfg
= ipr_cmd
->ioa_cfg
;
5334 ioa_cfg
->in_reset_reload
= 0;
5335 ioa_cfg
->reset_retries
= 0;
5336 list_add_tail(&ipr_cmd
->queue
, &ioa_cfg
->free_q
);
5337 wake_up_all(&ioa_cfg
->reset_wait_q
);
5339 spin_unlock_irq(ioa_cfg
->host
->host_lock
);
5340 scsi_unblock_requests(ioa_cfg
->host
);
5341 spin_lock_irq(ioa_cfg
->host
->host_lock
);
5344 return IPR_RC_JOB_RETURN
;
5348 * ipr_ioa_reset_done - IOA reset completion.
5349 * @ipr_cmd: ipr command struct
5351 * This function processes the completion of an adapter reset.
5352 * It schedules any necessary mid-layer add/removes and
5353 * wakes any reset sleepers.
5358 static int ipr_ioa_reset_done(struct ipr_cmnd
*ipr_cmd
)
5360 struct ipr_ioa_cfg
*ioa_cfg
= ipr_cmd
->ioa_cfg
;
5361 struct ipr_resource_entry
*res
;
5362 struct ipr_hostrcb
*hostrcb
, *temp
;
5366 ioa_cfg
->in_reset_reload
= 0;
5367 ioa_cfg
->allow_cmds
= 1;
5368 ioa_cfg
->reset_cmd
= NULL
;
5369 ioa_cfg
->doorbell
|= IPR_RUNTIME_RESET
;
5371 list_for_each_entry(res
, &ioa_cfg
->used_res_q
, queue
) {
5372 if (ioa_cfg
->allow_ml_add_del
&& (res
->add_to_ml
|| res
->del_from_ml
)) {
5377 schedule_work(&ioa_cfg
->work_q
);
5379 list_for_each_entry_safe(hostrcb
, temp
, &ioa_cfg
->hostrcb_free_q
, queue
) {
5380 list_del(&hostrcb
->queue
);
5381 if (i
++ < IPR_NUM_LOG_HCAMS
)
5382 ipr_send_hcam(ioa_cfg
, IPR_HCAM_CDB_OP_CODE_LOG_DATA
, hostrcb
);
5384 ipr_send_hcam(ioa_cfg
, IPR_HCAM_CDB_OP_CODE_CONFIG_CHANGE
, hostrcb
);
5387 scsi_report_bus_reset(ioa_cfg
->host
, IPR_VSET_BUS
);
5388 dev_info(&ioa_cfg
->pdev
->dev
, "IOA initialized.\n");
5390 ioa_cfg
->reset_retries
= 0;
5391 list_add_tail(&ipr_cmd
->queue
, &ioa_cfg
->free_q
);
5392 wake_up_all(&ioa_cfg
->reset_wait_q
);
5394 spin_unlock(ioa_cfg
->host
->host_lock
);
5395 scsi_unblock_requests(ioa_cfg
->host
);
5396 spin_lock(ioa_cfg
->host
->host_lock
);
5398 if (!ioa_cfg
->allow_cmds
)
5399 scsi_block_requests(ioa_cfg
->host
);
5402 return IPR_RC_JOB_RETURN
;
5406 * ipr_set_sup_dev_dflt - Initialize a Set Supported Device buffer
5407 * @supported_dev: supported device struct
5408 * @vpids: vendor product id struct
5413 static void ipr_set_sup_dev_dflt(struct ipr_supported_device
*supported_dev
,
5414 struct ipr_std_inq_vpids
*vpids
)
5416 memset(supported_dev
, 0, sizeof(struct ipr_supported_device
));
5417 memcpy(&supported_dev
->vpids
, vpids
, sizeof(struct ipr_std_inq_vpids
));
5418 supported_dev
->num_records
= 1;
5419 supported_dev
->data_length
=
5420 cpu_to_be16(sizeof(struct ipr_supported_device
));
5421 supported_dev
->reserved
= 0;
5425 * ipr_set_supported_devs - Send Set Supported Devices for a device
5426 * @ipr_cmd: ipr command struct
5428 * This function send a Set Supported Devices to the adapter
5431 * IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
5433 static int ipr_set_supported_devs(struct ipr_cmnd
*ipr_cmd
)
5435 struct ipr_ioa_cfg
*ioa_cfg
= ipr_cmd
->ioa_cfg
;
5436 struct ipr_supported_device
*supp_dev
= &ioa_cfg
->vpd_cbs
->supp_dev
;
5437 struct ipr_ioadl_desc
*ioadl
= ipr_cmd
->ioadl
;
5438 struct ipr_ioarcb
*ioarcb
= &ipr_cmd
->ioarcb
;
5439 struct ipr_resource_entry
*res
= ipr_cmd
->u
.res
;
5441 ipr_cmd
->job_step
= ipr_ioa_reset_done
;
5443 list_for_each_entry_continue(res
, &ioa_cfg
->used_res_q
, queue
) {
5444 if (!ipr_is_scsi_disk(res
))
5447 ipr_cmd
->u
.res
= res
;
5448 ipr_set_sup_dev_dflt(supp_dev
, &res
->cfgte
.std_inq_data
.vpids
);
5450 ioarcb
->res_handle
= cpu_to_be32(IPR_IOA_RES_HANDLE
);
5451 ioarcb
->cmd_pkt
.flags_hi
|= IPR_FLAGS_HI_WRITE_NOT_READ
;
5452 ioarcb
->cmd_pkt
.request_type
= IPR_RQTYPE_IOACMD
;
5454 ioarcb
->cmd_pkt
.cdb
[0] = IPR_SET_SUPPORTED_DEVICES
;
5455 ioarcb
->cmd_pkt
.cdb
[7] = (sizeof(struct ipr_supported_device
) >> 8) & 0xff;
5456 ioarcb
->cmd_pkt
.cdb
[8] = sizeof(struct ipr_supported_device
) & 0xff;
5458 ioadl
->flags_and_data_len
= cpu_to_be32(IPR_IOADL_FLAGS_WRITE_LAST
|
5459 sizeof(struct ipr_supported_device
));
5460 ioadl
->address
= cpu_to_be32(ioa_cfg
->vpd_cbs_dma
+
5461 offsetof(struct ipr_misc_cbs
, supp_dev
));
5462 ioarcb
->write_ioadl_len
= cpu_to_be32(sizeof(struct ipr_ioadl_desc
));
5463 ioarcb
->write_data_transfer_length
=
5464 cpu_to_be32(sizeof(struct ipr_supported_device
));
5466 ipr_do_req(ipr_cmd
, ipr_reset_ioa_job
, ipr_timeout
,
5467 IPR_SET_SUP_DEVICE_TIMEOUT
);
5469 ipr_cmd
->job_step
= ipr_set_supported_devs
;
5470 return IPR_RC_JOB_RETURN
;
5473 return IPR_RC_JOB_CONTINUE
;
5477 * ipr_setup_write_cache - Disable write cache if needed
5478 * @ipr_cmd: ipr command struct
5480 * This function sets up adapters write cache to desired setting
5483 * IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
5485 static int ipr_setup_write_cache(struct ipr_cmnd
*ipr_cmd
)
5487 struct ipr_ioa_cfg
*ioa_cfg
= ipr_cmd
->ioa_cfg
;
5489 ipr_cmd
->job_step
= ipr_set_supported_devs
;
5490 ipr_cmd
->u
.res
= list_entry(ioa_cfg
->used_res_q
.next
,
5491 struct ipr_resource_entry
, queue
);
5493 if (ioa_cfg
->cache_state
!= CACHE_DISABLED
)
5494 return IPR_RC_JOB_CONTINUE
;
5496 ipr_cmd
->ioarcb
.res_handle
= cpu_to_be32(IPR_IOA_RES_HANDLE
);
5497 ipr_cmd
->ioarcb
.cmd_pkt
.request_type
= IPR_RQTYPE_IOACMD
;
5498 ipr_cmd
->ioarcb
.cmd_pkt
.cdb
[0] = IPR_IOA_SHUTDOWN
;
5499 ipr_cmd
->ioarcb
.cmd_pkt
.cdb
[1] = IPR_SHUTDOWN_PREPARE_FOR_NORMAL
;
5501 ipr_do_req(ipr_cmd
, ipr_reset_ioa_job
, ipr_timeout
, IPR_INTERNAL_TIMEOUT
);
5503 return IPR_RC_JOB_RETURN
;
5507 * ipr_get_mode_page - Locate specified mode page
5508 * @mode_pages: mode page buffer
5509 * @page_code: page code to find
5510 * @len: minimum required length for mode page
5513 * pointer to mode page / NULL on failure
5515 static void *ipr_get_mode_page(struct ipr_mode_pages
*mode_pages
,
5516 u32 page_code
, u32 len
)
5518 struct ipr_mode_page_hdr
*mode_hdr
;
5522 if (!mode_pages
|| (mode_pages
->hdr
.length
== 0))
5525 length
= (mode_pages
->hdr
.length
+ 1) - 4 - mode_pages
->hdr
.block_desc_len
;
5526 mode_hdr
= (struct ipr_mode_page_hdr
*)
5527 (mode_pages
->data
+ mode_pages
->hdr
.block_desc_len
);
5530 if (IPR_GET_MODE_PAGE_CODE(mode_hdr
) == page_code
) {
5531 if (mode_hdr
->page_length
>= (len
- sizeof(struct ipr_mode_page_hdr
)))
5535 page_length
= (sizeof(struct ipr_mode_page_hdr
) +
5536 mode_hdr
->page_length
);
5537 length
-= page_length
;
5538 mode_hdr
= (struct ipr_mode_page_hdr
*)
5539 ((unsigned long)mode_hdr
+ page_length
);
5546 * ipr_check_term_power - Check for term power errors
5547 * @ioa_cfg: ioa config struct
5548 * @mode_pages: IOAFP mode pages buffer
5550 * Check the IOAFP's mode page 28 for term power errors
5555 static void ipr_check_term_power(struct ipr_ioa_cfg
*ioa_cfg
,
5556 struct ipr_mode_pages
*mode_pages
)
5560 struct ipr_dev_bus_entry
*bus
;
5561 struct ipr_mode_page28
*mode_page
;
5563 mode_page
= ipr_get_mode_page(mode_pages
, 0x28,
5564 sizeof(struct ipr_mode_page28
));
5566 entry_length
= mode_page
->entry_length
;
5568 bus
= mode_page
->bus
;
5570 for (i
= 0; i
< mode_page
->num_entries
; i
++) {
5571 if (bus
->flags
& IPR_SCSI_ATTR_NO_TERM_PWR
) {
5572 dev_err(&ioa_cfg
->pdev
->dev
,
5573 "Term power is absent on scsi bus %d\n",
5577 bus
= (struct ipr_dev_bus_entry
*)((char *)bus
+ entry_length
);
5582 * ipr_scsi_bus_speed_limit - Limit the SCSI speed based on SES table
5583 * @ioa_cfg: ioa config struct
5585 * Looks through the config table checking for SES devices. If
5586 * the SES device is in the SES table indicating a maximum SCSI
5587 * bus speed, the speed is limited for the bus.
5592 static void ipr_scsi_bus_speed_limit(struct ipr_ioa_cfg
*ioa_cfg
)
5597 for (i
= 0; i
< IPR_MAX_NUM_BUSES
; i
++) {
5598 max_xfer_rate
= ipr_get_max_scsi_speed(ioa_cfg
, i
,
5599 ioa_cfg
->bus_attr
[i
].bus_width
);
5601 if (max_xfer_rate
< ioa_cfg
->bus_attr
[i
].max_xfer_rate
)
5602 ioa_cfg
->bus_attr
[i
].max_xfer_rate
= max_xfer_rate
;
5607 * ipr_modify_ioafp_mode_page_28 - Modify IOAFP Mode Page 28
5608 * @ioa_cfg: ioa config struct
5609 * @mode_pages: mode page 28 buffer
5611 * Updates mode page 28 based on driver configuration
5616 static void ipr_modify_ioafp_mode_page_28(struct ipr_ioa_cfg
*ioa_cfg
,
5617 struct ipr_mode_pages
*mode_pages
)
5619 int i
, entry_length
;
5620 struct ipr_dev_bus_entry
*bus
;
5621 struct ipr_bus_attributes
*bus_attr
;
5622 struct ipr_mode_page28
*mode_page
;
5624 mode_page
= ipr_get_mode_page(mode_pages
, 0x28,
5625 sizeof(struct ipr_mode_page28
));
5627 entry_length
= mode_page
->entry_length
;
5629 /* Loop for each device bus entry */
5630 for (i
= 0, bus
= mode_page
->bus
;
5631 i
< mode_page
->num_entries
;
5632 i
++, bus
= (struct ipr_dev_bus_entry
*)((u8
*)bus
+ entry_length
)) {
5633 if (bus
->res_addr
.bus
> IPR_MAX_NUM_BUSES
) {
5634 dev_err(&ioa_cfg
->pdev
->dev
,
5635 "Invalid resource address reported: 0x%08X\n",
5636 IPR_GET_PHYS_LOC(bus
->res_addr
));
5640 bus_attr
= &ioa_cfg
->bus_attr
[i
];
5641 bus
->extended_reset_delay
= IPR_EXTENDED_RESET_DELAY
;
5642 bus
->bus_width
= bus_attr
->bus_width
;
5643 bus
->max_xfer_rate
= cpu_to_be32(bus_attr
->max_xfer_rate
);
5644 bus
->flags
&= ~IPR_SCSI_ATTR_QAS_MASK
;
5645 if (bus_attr
->qas_enabled
)
5646 bus
->flags
|= IPR_SCSI_ATTR_ENABLE_QAS
;
5648 bus
->flags
|= IPR_SCSI_ATTR_DISABLE_QAS
;
5653 * ipr_build_mode_select - Build a mode select command
5654 * @ipr_cmd: ipr command struct
5655 * @res_handle: resource handle to send command to
5656 * @parm: Byte 2 of Mode Sense command
5657 * @dma_addr: DMA buffer address
5658 * @xfer_len: data transfer length
5663 static void ipr_build_mode_select(struct ipr_cmnd
*ipr_cmd
,
5664 __be32 res_handle
, u8 parm
, u32 dma_addr
,
5667 struct ipr_ioadl_desc
*ioadl
= ipr_cmd
->ioadl
;
5668 struct ipr_ioarcb
*ioarcb
= &ipr_cmd
->ioarcb
;
5670 ioarcb
->res_handle
= res_handle
;
5671 ioarcb
->cmd_pkt
.request_type
= IPR_RQTYPE_SCSICDB
;
5672 ioarcb
->cmd_pkt
.flags_hi
|= IPR_FLAGS_HI_WRITE_NOT_READ
;
5673 ioarcb
->cmd_pkt
.cdb
[0] = MODE_SELECT
;
5674 ioarcb
->cmd_pkt
.cdb
[1] = parm
;
5675 ioarcb
->cmd_pkt
.cdb
[4] = xfer_len
;
5677 ioadl
->flags_and_data_len
=
5678 cpu_to_be32(IPR_IOADL_FLAGS_WRITE_LAST
| xfer_len
);
5679 ioadl
->address
= cpu_to_be32(dma_addr
);
5680 ioarcb
->write_ioadl_len
= cpu_to_be32(sizeof(struct ipr_ioadl_desc
));
5681 ioarcb
->write_data_transfer_length
= cpu_to_be32(xfer_len
);
5685 * ipr_ioafp_mode_select_page28 - Issue Mode Select Page 28 to IOA
5686 * @ipr_cmd: ipr command struct
5688 * This function sets up the SCSI bus attributes and sends
5689 * a Mode Select for Page 28 to activate them.
5694 static int ipr_ioafp_mode_select_page28(struct ipr_cmnd
*ipr_cmd
)
5696 struct ipr_ioa_cfg
*ioa_cfg
= ipr_cmd
->ioa_cfg
;
5697 struct ipr_mode_pages
*mode_pages
= &ioa_cfg
->vpd_cbs
->mode_pages
;
5701 ipr_scsi_bus_speed_limit(ioa_cfg
);
5702 ipr_check_term_power(ioa_cfg
, mode_pages
);
5703 ipr_modify_ioafp_mode_page_28(ioa_cfg
, mode_pages
);
5704 length
= mode_pages
->hdr
.length
+ 1;
5705 mode_pages
->hdr
.length
= 0;
5707 ipr_build_mode_select(ipr_cmd
, cpu_to_be32(IPR_IOA_RES_HANDLE
), 0x11,
5708 ioa_cfg
->vpd_cbs_dma
+ offsetof(struct ipr_misc_cbs
, mode_pages
),
5711 ipr_cmd
->job_step
= ipr_setup_write_cache
;
5712 ipr_do_req(ipr_cmd
, ipr_reset_ioa_job
, ipr_timeout
, IPR_INTERNAL_TIMEOUT
);
5715 return IPR_RC_JOB_RETURN
;
5719 * ipr_build_mode_sense - Builds a mode sense command
5720 * @ipr_cmd: ipr command struct
5721 * @res: resource entry struct
5722 * @parm: Byte 2 of mode sense command
5723 * @dma_addr: DMA address of mode sense buffer
5724 * @xfer_len: Size of DMA buffer
5729 static void ipr_build_mode_sense(struct ipr_cmnd
*ipr_cmd
,
5731 u8 parm
, u32 dma_addr
, u8 xfer_len
)
5733 struct ipr_ioadl_desc
*ioadl
= ipr_cmd
->ioadl
;
5734 struct ipr_ioarcb
*ioarcb
= &ipr_cmd
->ioarcb
;
5736 ioarcb
->res_handle
= res_handle
;
5737 ioarcb
->cmd_pkt
.cdb
[0] = MODE_SENSE
;
5738 ioarcb
->cmd_pkt
.cdb
[2] = parm
;
5739 ioarcb
->cmd_pkt
.cdb
[4] = xfer_len
;
5740 ioarcb
->cmd_pkt
.request_type
= IPR_RQTYPE_SCSICDB
;
5742 ioadl
->flags_and_data_len
=
5743 cpu_to_be32(IPR_IOADL_FLAGS_READ_LAST
| xfer_len
);
5744 ioadl
->address
= cpu_to_be32(dma_addr
);
5745 ioarcb
->read_ioadl_len
= cpu_to_be32(sizeof(struct ipr_ioadl_desc
));
5746 ioarcb
->read_data_transfer_length
= cpu_to_be32(xfer_len
);
5750 * ipr_reset_cmd_failed - Handle failure of IOA reset command
5751 * @ipr_cmd: ipr command struct
5753 * This function handles the failure of an IOA bringup command.
5758 static int ipr_reset_cmd_failed(struct ipr_cmnd
*ipr_cmd
)
5760 struct ipr_ioa_cfg
*ioa_cfg
= ipr_cmd
->ioa_cfg
;
5761 u32 ioasc
= be32_to_cpu(ipr_cmd
->ioasa
.ioasc
);
5763 dev_err(&ioa_cfg
->pdev
->dev
,
5764 "0x%02X failed with IOASC: 0x%08X\n",
5765 ipr_cmd
->ioarcb
.cmd_pkt
.cdb
[0], ioasc
);
5767 ipr_initiate_ioa_reset(ioa_cfg
, IPR_SHUTDOWN_NONE
);
5768 list_add_tail(&ipr_cmd
->queue
, &ioa_cfg
->free_q
);
5769 return IPR_RC_JOB_RETURN
;
5773 * ipr_reset_mode_sense_failed - Handle failure of IOAFP mode sense
5774 * @ipr_cmd: ipr command struct
5776 * This function handles the failure of a Mode Sense to the IOAFP.
5777 * Some adapters do not handle all mode pages.
5780 * IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
5782 static int ipr_reset_mode_sense_failed(struct ipr_cmnd
*ipr_cmd
)
5784 u32 ioasc
= be32_to_cpu(ipr_cmd
->ioasa
.ioasc
);
5786 if (ioasc
== IPR_IOASC_IR_INVALID_REQ_TYPE_OR_PKT
) {
5787 ipr_cmd
->job_step
= ipr_setup_write_cache
;
5788 return IPR_RC_JOB_CONTINUE
;
5791 return ipr_reset_cmd_failed(ipr_cmd
);
5795 * ipr_ioafp_mode_sense_page28 - Issue Mode Sense Page 28 to IOA
5796 * @ipr_cmd: ipr command struct
5798 * This function send a Page 28 mode sense to the IOA to
5799 * retrieve SCSI bus attributes.
5804 static int ipr_ioafp_mode_sense_page28(struct ipr_cmnd
*ipr_cmd
)
5806 struct ipr_ioa_cfg
*ioa_cfg
= ipr_cmd
->ioa_cfg
;
5809 ipr_build_mode_sense(ipr_cmd
, cpu_to_be32(IPR_IOA_RES_HANDLE
),
5810 0x28, ioa_cfg
->vpd_cbs_dma
+
5811 offsetof(struct ipr_misc_cbs
, mode_pages
),
5812 sizeof(struct ipr_mode_pages
));
5814 ipr_cmd
->job_step
= ipr_ioafp_mode_select_page28
;
5815 ipr_cmd
->job_step_failed
= ipr_reset_mode_sense_failed
;
5817 ipr_do_req(ipr_cmd
, ipr_reset_ioa_job
, ipr_timeout
, IPR_INTERNAL_TIMEOUT
);
5820 return IPR_RC_JOB_RETURN
;
5824 * ipr_ioafp_mode_select_page24 - Issue Mode Select to IOA
5825 * @ipr_cmd: ipr command struct
5827 * This function enables dual IOA RAID support if possible.
5832 static int ipr_ioafp_mode_select_page24(struct ipr_cmnd
*ipr_cmd
)
5834 struct ipr_ioa_cfg
*ioa_cfg
= ipr_cmd
->ioa_cfg
;
5835 struct ipr_mode_pages
*mode_pages
= &ioa_cfg
->vpd_cbs
->mode_pages
;
5836 struct ipr_mode_page24
*mode_page
;
5840 mode_page
= ipr_get_mode_page(mode_pages
, 0x24,
5841 sizeof(struct ipr_mode_page24
));
5844 mode_page
->flags
|= IPR_ENABLE_DUAL_IOA_AF
;
5846 length
= mode_pages
->hdr
.length
+ 1;
5847 mode_pages
->hdr
.length
= 0;
5849 ipr_build_mode_select(ipr_cmd
, cpu_to_be32(IPR_IOA_RES_HANDLE
), 0x11,
5850 ioa_cfg
->vpd_cbs_dma
+ offsetof(struct ipr_misc_cbs
, mode_pages
),
5853 ipr_cmd
->job_step
= ipr_ioafp_mode_sense_page28
;
5854 ipr_do_req(ipr_cmd
, ipr_reset_ioa_job
, ipr_timeout
, IPR_INTERNAL_TIMEOUT
);
5857 return IPR_RC_JOB_RETURN
;
5861 * ipr_reset_mode_sense_page24_failed - Handle failure of IOAFP mode sense
5862 * @ipr_cmd: ipr command struct
5864 * This function handles the failure of a Mode Sense to the IOAFP.
5865 * Some adapters do not handle all mode pages.
5868 * IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
5870 static int ipr_reset_mode_sense_page24_failed(struct ipr_cmnd
*ipr_cmd
)
5872 u32 ioasc
= be32_to_cpu(ipr_cmd
->ioasa
.ioasc
);
5874 if (ioasc
== IPR_IOASC_IR_INVALID_REQ_TYPE_OR_PKT
) {
5875 ipr_cmd
->job_step
= ipr_ioafp_mode_sense_page28
;
5876 return IPR_RC_JOB_CONTINUE
;
5879 return ipr_reset_cmd_failed(ipr_cmd
);
5883 * ipr_ioafp_mode_sense_page24 - Issue Page 24 Mode Sense to IOA
5884 * @ipr_cmd: ipr command struct
5886 * This function send a mode sense to the IOA to retrieve
5887 * the IOA Advanced Function Control mode page.
5892 static int ipr_ioafp_mode_sense_page24(struct ipr_cmnd
*ipr_cmd
)
5894 struct ipr_ioa_cfg
*ioa_cfg
= ipr_cmd
->ioa_cfg
;
5897 ipr_build_mode_sense(ipr_cmd
, cpu_to_be32(IPR_IOA_RES_HANDLE
),
5898 0x24, ioa_cfg
->vpd_cbs_dma
+
5899 offsetof(struct ipr_misc_cbs
, mode_pages
),
5900 sizeof(struct ipr_mode_pages
));
5902 ipr_cmd
->job_step
= ipr_ioafp_mode_select_page24
;
5903 ipr_cmd
->job_step_failed
= ipr_reset_mode_sense_page24_failed
;
5905 ipr_do_req(ipr_cmd
, ipr_reset_ioa_job
, ipr_timeout
, IPR_INTERNAL_TIMEOUT
);
5908 return IPR_RC_JOB_RETURN
;
5912 * ipr_init_res_table - Initialize the resource table
5913 * @ipr_cmd: ipr command struct
5915 * This function looks through the existing resource table, comparing
5916 * it with the config table. This function will take care of old/new
5917 * devices and schedule adding/removing them from the mid-layer
5921 * IPR_RC_JOB_CONTINUE
5923 static int ipr_init_res_table(struct ipr_cmnd
*ipr_cmd
)
5925 struct ipr_ioa_cfg
*ioa_cfg
= ipr_cmd
->ioa_cfg
;
5926 struct ipr_resource_entry
*res
, *temp
;
5927 struct ipr_config_table_entry
*cfgte
;
5932 if (ioa_cfg
->cfg_table
->hdr
.flags
& IPR_UCODE_DOWNLOAD_REQ
)
5933 dev_err(&ioa_cfg
->pdev
->dev
, "Microcode download required\n");
5935 list_for_each_entry_safe(res
, temp
, &ioa_cfg
->used_res_q
, queue
)
5936 list_move_tail(&res
->queue
, &old_res
);
5938 for (i
= 0; i
< ioa_cfg
->cfg_table
->hdr
.num_entries
; i
++) {
5939 cfgte
= &ioa_cfg
->cfg_table
->dev
[i
];
5942 list_for_each_entry_safe(res
, temp
, &old_res
, queue
) {
5943 if (!memcmp(&res
->cfgte
.res_addr
,
5944 &cfgte
->res_addr
, sizeof(cfgte
->res_addr
))) {
5945 list_move_tail(&res
->queue
, &ioa_cfg
->used_res_q
);
5952 if (list_empty(&ioa_cfg
->free_res_q
)) {
5953 dev_err(&ioa_cfg
->pdev
->dev
, "Too many devices attached\n");
5958 res
= list_entry(ioa_cfg
->free_res_q
.next
,
5959 struct ipr_resource_entry
, queue
);
5960 list_move_tail(&res
->queue
, &ioa_cfg
->used_res_q
);
5961 ipr_init_res_entry(res
);
5966 memcpy(&res
->cfgte
, cfgte
, sizeof(struct ipr_config_table_entry
));
5969 list_for_each_entry_safe(res
, temp
, &old_res
, queue
) {
5971 res
->del_from_ml
= 1;
5972 res
->cfgte
.res_handle
= IPR_INVALID_RES_HANDLE
;
5973 list_move_tail(&res
->queue
, &ioa_cfg
->used_res_q
);
5975 list_move_tail(&res
->queue
, &ioa_cfg
->free_res_q
);
5979 if (ioa_cfg
->dual_raid
&& ipr_dual_ioa_raid
)
5980 ipr_cmd
->job_step
= ipr_ioafp_mode_sense_page24
;
5982 ipr_cmd
->job_step
= ipr_ioafp_mode_sense_page28
;
5985 return IPR_RC_JOB_CONTINUE
;
5989 * ipr_ioafp_query_ioa_cfg - Send a Query IOA Config to the adapter.
5990 * @ipr_cmd: ipr command struct
5992 * This function sends a Query IOA Configuration command
5993 * to the adapter to retrieve the IOA configuration table.
5998 static int ipr_ioafp_query_ioa_cfg(struct ipr_cmnd
*ipr_cmd
)
6000 struct ipr_ioa_cfg
*ioa_cfg
= ipr_cmd
->ioa_cfg
;
6001 struct ipr_ioarcb
*ioarcb
= &ipr_cmd
->ioarcb
;
6002 struct ipr_ioadl_desc
*ioadl
= ipr_cmd
->ioadl
;
6003 struct ipr_inquiry_page3
*ucode_vpd
= &ioa_cfg
->vpd_cbs
->page3_data
;
6004 struct ipr_inquiry_cap
*cap
= &ioa_cfg
->vpd_cbs
->cap
;
6007 if (cap
->cap
& IPR_CAP_DUAL_IOA_RAID
)
6008 ioa_cfg
->dual_raid
= 1;
6009 dev_info(&ioa_cfg
->pdev
->dev
, "Adapter firmware version: %02X%02X%02X%02X\n",
6010 ucode_vpd
->major_release
, ucode_vpd
->card_type
,
6011 ucode_vpd
->minor_release
[0], ucode_vpd
->minor_release
[1]);
6012 ioarcb
->cmd_pkt
.request_type
= IPR_RQTYPE_IOACMD
;
6013 ioarcb
->res_handle
= cpu_to_be32(IPR_IOA_RES_HANDLE
);
6015 ioarcb
->cmd_pkt
.cdb
[0] = IPR_QUERY_IOA_CONFIG
;
6016 ioarcb
->cmd_pkt
.cdb
[7] = (sizeof(struct ipr_config_table
) >> 8) & 0xff;
6017 ioarcb
->cmd_pkt
.cdb
[8] = sizeof(struct ipr_config_table
) & 0xff;
6019 ioarcb
->read_ioadl_len
= cpu_to_be32(sizeof(struct ipr_ioadl_desc
));
6020 ioarcb
->read_data_transfer_length
=
6021 cpu_to_be32(sizeof(struct ipr_config_table
));
6023 ioadl
->address
= cpu_to_be32(ioa_cfg
->cfg_table_dma
);
6024 ioadl
->flags_and_data_len
=
6025 cpu_to_be32(IPR_IOADL_FLAGS_READ_LAST
| sizeof(struct ipr_config_table
));
6027 ipr_cmd
->job_step
= ipr_init_res_table
;
6029 ipr_do_req(ipr_cmd
, ipr_reset_ioa_job
, ipr_timeout
, IPR_INTERNAL_TIMEOUT
);
6032 return IPR_RC_JOB_RETURN
;
6036 * ipr_ioafp_inquiry - Send an Inquiry to the adapter.
6037 * @ipr_cmd: ipr command struct
6039 * This utility function sends an inquiry to the adapter.
6044 static void ipr_ioafp_inquiry(struct ipr_cmnd
*ipr_cmd
, u8 flags
, u8 page
,
6045 u32 dma_addr
, u8 xfer_len
)
6047 struct ipr_ioarcb
*ioarcb
= &ipr_cmd
->ioarcb
;
6048 struct ipr_ioadl_desc
*ioadl
= ipr_cmd
->ioadl
;
6051 ioarcb
->cmd_pkt
.request_type
= IPR_RQTYPE_SCSICDB
;
6052 ioarcb
->res_handle
= cpu_to_be32(IPR_IOA_RES_HANDLE
);
6054 ioarcb
->cmd_pkt
.cdb
[0] = INQUIRY
;
6055 ioarcb
->cmd_pkt
.cdb
[1] = flags
;
6056 ioarcb
->cmd_pkt
.cdb
[2] = page
;
6057 ioarcb
->cmd_pkt
.cdb
[4] = xfer_len
;
6059 ioarcb
->read_ioadl_len
= cpu_to_be32(sizeof(struct ipr_ioadl_desc
));
6060 ioarcb
->read_data_transfer_length
= cpu_to_be32(xfer_len
);
6062 ioadl
->address
= cpu_to_be32(dma_addr
);
6063 ioadl
->flags_and_data_len
=
6064 cpu_to_be32(IPR_IOADL_FLAGS_READ_LAST
| xfer_len
);
6066 ipr_do_req(ipr_cmd
, ipr_reset_ioa_job
, ipr_timeout
, IPR_INTERNAL_TIMEOUT
);
6071 * ipr_inquiry_page_supported - Is the given inquiry page supported
6072 * @page0: inquiry page 0 buffer
6075 * This function determines if the specified inquiry page is supported.
6078 * 1 if page is supported / 0 if not
6080 static int ipr_inquiry_page_supported(struct ipr_inquiry_page0
*page0
, u8 page
)
6084 for (i
= 0; i
< min_t(u8
, page0
->len
, IPR_INQUIRY_PAGE0_ENTRIES
); i
++)
6085 if (page0
->page
[i
] == page
)
6092 * ipr_ioafp_cap_inquiry - Send a Page 0xD0 Inquiry to the adapter.
6093 * @ipr_cmd: ipr command struct
6095 * This function sends a Page 0xD0 inquiry to the adapter
6096 * to retrieve adapter capabilities.
6099 * IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
6101 static int ipr_ioafp_cap_inquiry(struct ipr_cmnd
*ipr_cmd
)
6103 struct ipr_ioa_cfg
*ioa_cfg
= ipr_cmd
->ioa_cfg
;
6104 struct ipr_inquiry_page0
*page0
= &ioa_cfg
->vpd_cbs
->page0_data
;
6105 struct ipr_inquiry_cap
*cap
= &ioa_cfg
->vpd_cbs
->cap
;
6108 ipr_cmd
->job_step
= ipr_ioafp_query_ioa_cfg
;
6109 memset(cap
, 0, sizeof(*cap
));
6111 if (ipr_inquiry_page_supported(page0
, 0xD0)) {
6112 ipr_ioafp_inquiry(ipr_cmd
, 1, 0xD0,
6113 ioa_cfg
->vpd_cbs_dma
+ offsetof(struct ipr_misc_cbs
, cap
),
6114 sizeof(struct ipr_inquiry_cap
));
6115 return IPR_RC_JOB_RETURN
;
6119 return IPR_RC_JOB_CONTINUE
;
6123 * ipr_ioafp_page3_inquiry - Send a Page 3 Inquiry to the adapter.
6124 * @ipr_cmd: ipr command struct
6126 * This function sends a Page 3 inquiry to the adapter
6127 * to retrieve software VPD information.
6130 * IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
6132 static int ipr_ioafp_page3_inquiry(struct ipr_cmnd
*ipr_cmd
)
6134 struct ipr_ioa_cfg
*ioa_cfg
= ipr_cmd
->ioa_cfg
;
6135 struct ipr_inquiry_page0
*page0
= &ioa_cfg
->vpd_cbs
->page0_data
;
6139 if (!ipr_inquiry_page_supported(page0
, 1))
6140 ioa_cfg
->cache_state
= CACHE_NONE
;
6142 ipr_cmd
->job_step
= ipr_ioafp_cap_inquiry
;
6144 ipr_ioafp_inquiry(ipr_cmd
, 1, 3,
6145 ioa_cfg
->vpd_cbs_dma
+ offsetof(struct ipr_misc_cbs
, page3_data
),
6146 sizeof(struct ipr_inquiry_page3
));
6149 return IPR_RC_JOB_RETURN
;
6153 * ipr_ioafp_page0_inquiry - Send a Page 0 Inquiry to the adapter.
6154 * @ipr_cmd: ipr command struct
6156 * This function sends a Page 0 inquiry to the adapter
6157 * to retrieve supported inquiry pages.
6160 * IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
6162 static int ipr_ioafp_page0_inquiry(struct ipr_cmnd
*ipr_cmd
)
6164 struct ipr_ioa_cfg
*ioa_cfg
= ipr_cmd
->ioa_cfg
;
6169 /* Grab the type out of the VPD and store it away */
6170 memcpy(type
, ioa_cfg
->vpd_cbs
->ioa_vpd
.std_inq_data
.vpids
.product_id
, 4);
6172 ioa_cfg
->type
= simple_strtoul((char *)type
, NULL
, 16);
6174 ipr_cmd
->job_step
= ipr_ioafp_page3_inquiry
;
6176 ipr_ioafp_inquiry(ipr_cmd
, 1, 0,
6177 ioa_cfg
->vpd_cbs_dma
+ offsetof(struct ipr_misc_cbs
, page0_data
),
6178 sizeof(struct ipr_inquiry_page0
));
6181 return IPR_RC_JOB_RETURN
;
6185 * ipr_ioafp_std_inquiry - Send a Standard Inquiry to the adapter.
6186 * @ipr_cmd: ipr command struct
6188 * This function sends a standard inquiry to the adapter.
6193 static int ipr_ioafp_std_inquiry(struct ipr_cmnd
*ipr_cmd
)
6195 struct ipr_ioa_cfg
*ioa_cfg
= ipr_cmd
->ioa_cfg
;
6198 ipr_cmd
->job_step
= ipr_ioafp_page0_inquiry
;
6200 ipr_ioafp_inquiry(ipr_cmd
, 0, 0,
6201 ioa_cfg
->vpd_cbs_dma
+ offsetof(struct ipr_misc_cbs
, ioa_vpd
),
6202 sizeof(struct ipr_ioa_vpd
));
6205 return IPR_RC_JOB_RETURN
;
6209 * ipr_ioafp_indentify_hrrq - Send Identify Host RRQ.
6210 * @ipr_cmd: ipr command struct
6212 * This function send an Identify Host Request Response Queue
6213 * command to establish the HRRQ with the adapter.
6218 static int ipr_ioafp_indentify_hrrq(struct ipr_cmnd
*ipr_cmd
)
6220 struct ipr_ioa_cfg
*ioa_cfg
= ipr_cmd
->ioa_cfg
;
6221 struct ipr_ioarcb
*ioarcb
= &ipr_cmd
->ioarcb
;
6224 dev_info(&ioa_cfg
->pdev
->dev
, "Starting IOA initialization sequence.\n");
6226 ioarcb
->cmd_pkt
.cdb
[0] = IPR_ID_HOST_RR_Q
;
6227 ioarcb
->res_handle
= cpu_to_be32(IPR_IOA_RES_HANDLE
);
6229 ioarcb
->cmd_pkt
.request_type
= IPR_RQTYPE_IOACMD
;
6230 ioarcb
->cmd_pkt
.cdb
[2] =
6231 ((u32
) ioa_cfg
->host_rrq_dma
>> 24) & 0xff;
6232 ioarcb
->cmd_pkt
.cdb
[3] =
6233 ((u32
) ioa_cfg
->host_rrq_dma
>> 16) & 0xff;
6234 ioarcb
->cmd_pkt
.cdb
[4] =
6235 ((u32
) ioa_cfg
->host_rrq_dma
>> 8) & 0xff;
6236 ioarcb
->cmd_pkt
.cdb
[5] =
6237 ((u32
) ioa_cfg
->host_rrq_dma
) & 0xff;
6238 ioarcb
->cmd_pkt
.cdb
[7] =
6239 ((sizeof(u32
) * IPR_NUM_CMD_BLKS
) >> 8) & 0xff;
6240 ioarcb
->cmd_pkt
.cdb
[8] =
6241 (sizeof(u32
) * IPR_NUM_CMD_BLKS
) & 0xff;
6243 ipr_cmd
->job_step
= ipr_ioafp_std_inquiry
;
6245 ipr_do_req(ipr_cmd
, ipr_reset_ioa_job
, ipr_timeout
, IPR_INTERNAL_TIMEOUT
);
6248 return IPR_RC_JOB_RETURN
;
6252 * ipr_reset_timer_done - Adapter reset timer function
6253 * @ipr_cmd: ipr command struct
6255 * Description: This function is used in adapter reset processing
6256 * for timing events. If the reset_cmd pointer in the IOA
6257 * config struct is not this adapter's we are doing nested
6258 * resets and fail_all_ops will take care of freeing the
6264 static void ipr_reset_timer_done(struct ipr_cmnd
*ipr_cmd
)
6266 struct ipr_ioa_cfg
*ioa_cfg
= ipr_cmd
->ioa_cfg
;
6267 unsigned long lock_flags
= 0;
6269 spin_lock_irqsave(ioa_cfg
->host
->host_lock
, lock_flags
);
6271 if (ioa_cfg
->reset_cmd
== ipr_cmd
) {
6272 list_del(&ipr_cmd
->queue
);
6273 ipr_cmd
->done(ipr_cmd
);
6276 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
6280 * ipr_reset_start_timer - Start a timer for adapter reset job
6281 * @ipr_cmd: ipr command struct
6282 * @timeout: timeout value
6284 * Description: This function is used in adapter reset processing
6285 * for timing events. If the reset_cmd pointer in the IOA
6286 * config struct is not this adapter's we are doing nested
6287 * resets and fail_all_ops will take care of freeing the
6293 static void ipr_reset_start_timer(struct ipr_cmnd
*ipr_cmd
,
6294 unsigned long timeout
)
6296 list_add_tail(&ipr_cmd
->queue
, &ipr_cmd
->ioa_cfg
->pending_q
);
6297 ipr_cmd
->done
= ipr_reset_ioa_job
;
6299 ipr_cmd
->timer
.data
= (unsigned long) ipr_cmd
;
6300 ipr_cmd
->timer
.expires
= jiffies
+ timeout
;
6301 ipr_cmd
->timer
.function
= (void (*)(unsigned long))ipr_reset_timer_done
;
6302 add_timer(&ipr_cmd
->timer
);
6306 * ipr_init_ioa_mem - Initialize ioa_cfg control block
6307 * @ioa_cfg: ioa cfg struct
6312 static void ipr_init_ioa_mem(struct ipr_ioa_cfg
*ioa_cfg
)
6314 memset(ioa_cfg
->host_rrq
, 0, sizeof(u32
) * IPR_NUM_CMD_BLKS
);
6316 /* Initialize Host RRQ pointers */
6317 ioa_cfg
->hrrq_start
= ioa_cfg
->host_rrq
;
6318 ioa_cfg
->hrrq_end
= &ioa_cfg
->host_rrq
[IPR_NUM_CMD_BLKS
- 1];
6319 ioa_cfg
->hrrq_curr
= ioa_cfg
->hrrq_start
;
6320 ioa_cfg
->toggle_bit
= 1;
6322 /* Zero out config table */
6323 memset(ioa_cfg
->cfg_table
, 0, sizeof(struct ipr_config_table
));
6327 * ipr_reset_enable_ioa - Enable the IOA following a reset.
6328 * @ipr_cmd: ipr command struct
6330 * This function reinitializes some control blocks and
6331 * enables destructive diagnostics on the adapter.
6336 static int ipr_reset_enable_ioa(struct ipr_cmnd
*ipr_cmd
)
6338 struct ipr_ioa_cfg
*ioa_cfg
= ipr_cmd
->ioa_cfg
;
6339 volatile u32 int_reg
;
6342 ipr_cmd
->job_step
= ipr_ioafp_indentify_hrrq
;
6343 ipr_init_ioa_mem(ioa_cfg
);
6345 ioa_cfg
->allow_interrupts
= 1;
6346 int_reg
= readl(ioa_cfg
->regs
.sense_interrupt_reg
);
6348 if (int_reg
& IPR_PCII_IOA_TRANS_TO_OPER
) {
6349 writel((IPR_PCII_ERROR_INTERRUPTS
| IPR_PCII_HRRQ_UPDATED
),
6350 ioa_cfg
->regs
.clr_interrupt_mask_reg
);
6351 int_reg
= readl(ioa_cfg
->regs
.sense_interrupt_mask_reg
);
6352 return IPR_RC_JOB_CONTINUE
;
6355 /* Enable destructive diagnostics on IOA */
6356 writel(ioa_cfg
->doorbell
, ioa_cfg
->regs
.set_uproc_interrupt_reg
);
6358 writel(IPR_PCII_OPER_INTERRUPTS
, ioa_cfg
->regs
.clr_interrupt_mask_reg
);
6359 int_reg
= readl(ioa_cfg
->regs
.sense_interrupt_mask_reg
);
6361 dev_info(&ioa_cfg
->pdev
->dev
, "Initializing IOA.\n");
6363 ipr_cmd
->timer
.data
= (unsigned long) ipr_cmd
;
6364 ipr_cmd
->timer
.expires
= jiffies
+ (ioa_cfg
->transop_timeout
* HZ
);
6365 ipr_cmd
->timer
.function
= (void (*)(unsigned long))ipr_oper_timeout
;
6366 ipr_cmd
->done
= ipr_reset_ioa_job
;
6367 add_timer(&ipr_cmd
->timer
);
6368 list_add_tail(&ipr_cmd
->queue
, &ioa_cfg
->pending_q
);
6371 return IPR_RC_JOB_RETURN
;
6375 * ipr_reset_wait_for_dump - Wait for a dump to timeout.
6376 * @ipr_cmd: ipr command struct
6378 * This function is invoked when an adapter dump has run out
6379 * of processing time.
6382 * IPR_RC_JOB_CONTINUE
6384 static int ipr_reset_wait_for_dump(struct ipr_cmnd
*ipr_cmd
)
6386 struct ipr_ioa_cfg
*ioa_cfg
= ipr_cmd
->ioa_cfg
;
6388 if (ioa_cfg
->sdt_state
== GET_DUMP
)
6389 ioa_cfg
->sdt_state
= ABORT_DUMP
;
6391 ipr_cmd
->job_step
= ipr_reset_alert
;
6393 return IPR_RC_JOB_CONTINUE
;
6397 * ipr_unit_check_no_data - Log a unit check/no data error log
6398 * @ioa_cfg: ioa config struct
6400 * Logs an error indicating the adapter unit checked, but for some
6401 * reason, we were unable to fetch the unit check buffer.
6406 static void ipr_unit_check_no_data(struct ipr_ioa_cfg
*ioa_cfg
)
6408 ioa_cfg
->errors_logged
++;
6409 dev_err(&ioa_cfg
->pdev
->dev
, "IOA unit check with no data\n");
6413 * ipr_get_unit_check_buffer - Get the unit check buffer from the IOA
6414 * @ioa_cfg: ioa config struct
6416 * Fetches the unit check buffer from the adapter by clocking the data
6417 * through the mailbox register.
6422 static void ipr_get_unit_check_buffer(struct ipr_ioa_cfg
*ioa_cfg
)
6424 unsigned long mailbox
;
6425 struct ipr_hostrcb
*hostrcb
;
6426 struct ipr_uc_sdt sdt
;
6430 mailbox
= readl(ioa_cfg
->ioa_mailbox
);
6432 if (!ipr_sdt_is_fmt2(mailbox
)) {
6433 ipr_unit_check_no_data(ioa_cfg
);
6437 memset(&sdt
, 0, sizeof(struct ipr_uc_sdt
));
6438 rc
= ipr_get_ldump_data_section(ioa_cfg
, mailbox
, (__be32
*) &sdt
,
6439 (sizeof(struct ipr_uc_sdt
)) / sizeof(__be32
));
6441 if (rc
|| (be32_to_cpu(sdt
.hdr
.state
) != IPR_FMT2_SDT_READY_TO_USE
) ||
6442 !(sdt
.entry
[0].flags
& IPR_SDT_VALID_ENTRY
)) {
6443 ipr_unit_check_no_data(ioa_cfg
);
6447 /* Find length of the first sdt entry (UC buffer) */
6448 length
= (be32_to_cpu(sdt
.entry
[0].end_offset
) -
6449 be32_to_cpu(sdt
.entry
[0].bar_str_offset
)) & IPR_FMT2_MBX_ADDR_MASK
;
6451 hostrcb
= list_entry(ioa_cfg
->hostrcb_free_q
.next
,
6452 struct ipr_hostrcb
, queue
);
6453 list_del(&hostrcb
->queue
);
6454 memset(&hostrcb
->hcam
, 0, sizeof(hostrcb
->hcam
));
6456 rc
= ipr_get_ldump_data_section(ioa_cfg
,
6457 be32_to_cpu(sdt
.entry
[0].bar_str_offset
),
6458 (__be32
*)&hostrcb
->hcam
,
6459 min(length
, (int)sizeof(hostrcb
->hcam
)) / sizeof(__be32
));
6462 ipr_handle_log_data(ioa_cfg
, hostrcb
);
6463 ioasc
= be32_to_cpu(hostrcb
->hcam
.u
.error
.failing_dev_ioasc
);
6464 if (ioasc
== IPR_IOASC_NR_IOA_RESET_REQUIRED
&&
6465 ioa_cfg
->sdt_state
== GET_DUMP
)
6466 ioa_cfg
->sdt_state
= WAIT_FOR_DUMP
;
6468 ipr_unit_check_no_data(ioa_cfg
);
6470 list_add_tail(&hostrcb
->queue
, &ioa_cfg
->hostrcb_free_q
);
6474 * ipr_reset_restore_cfg_space - Restore PCI config space.
6475 * @ipr_cmd: ipr command struct
6477 * Description: This function restores the saved PCI config space of
6478 * the adapter, fails all outstanding ops back to the callers, and
6479 * fetches the dump/unit check if applicable to this reset.
6482 * IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
6484 static int ipr_reset_restore_cfg_space(struct ipr_cmnd
*ipr_cmd
)
6486 struct ipr_ioa_cfg
*ioa_cfg
= ipr_cmd
->ioa_cfg
;
6490 rc
= pci_restore_state(ioa_cfg
->pdev
);
6492 if (rc
!= PCIBIOS_SUCCESSFUL
) {
6493 ipr_cmd
->ioasa
.ioasc
= cpu_to_be32(IPR_IOASC_PCI_ACCESS_ERROR
);
6494 return IPR_RC_JOB_CONTINUE
;
6497 if (ipr_set_pcix_cmd_reg(ioa_cfg
)) {
6498 ipr_cmd
->ioasa
.ioasc
= cpu_to_be32(IPR_IOASC_PCI_ACCESS_ERROR
);
6499 return IPR_RC_JOB_CONTINUE
;
6502 ipr_fail_all_ops(ioa_cfg
);
6504 if (ioa_cfg
->ioa_unit_checked
) {
6505 ioa_cfg
->ioa_unit_checked
= 0;
6506 ipr_get_unit_check_buffer(ioa_cfg
);
6507 ipr_cmd
->job_step
= ipr_reset_alert
;
6508 ipr_reset_start_timer(ipr_cmd
, 0);
6509 return IPR_RC_JOB_RETURN
;
6512 if (ioa_cfg
->in_ioa_bringdown
) {
6513 ipr_cmd
->job_step
= ipr_ioa_bringdown_done
;
6515 ipr_cmd
->job_step
= ipr_reset_enable_ioa
;
6517 if (GET_DUMP
== ioa_cfg
->sdt_state
) {
6518 ipr_reset_start_timer(ipr_cmd
, IPR_DUMP_TIMEOUT
);
6519 ipr_cmd
->job_step
= ipr_reset_wait_for_dump
;
6520 schedule_work(&ioa_cfg
->work_q
);
6521 return IPR_RC_JOB_RETURN
;
6526 return IPR_RC_JOB_CONTINUE
;
6530 * ipr_reset_bist_done - BIST has completed on the adapter.
6531 * @ipr_cmd: ipr command struct
6533 * Description: Unblock config space and resume the reset process.
6536 * IPR_RC_JOB_CONTINUE
6538 static int ipr_reset_bist_done(struct ipr_cmnd
*ipr_cmd
)
6541 pci_unblock_user_cfg_access(ipr_cmd
->ioa_cfg
->pdev
);
6542 ipr_cmd
->job_step
= ipr_reset_restore_cfg_space
;
6544 return IPR_RC_JOB_CONTINUE
;
6548 * ipr_reset_start_bist - Run BIST on the adapter.
6549 * @ipr_cmd: ipr command struct
6551 * Description: This function runs BIST on the adapter, then delays 2 seconds.
6554 * IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
6556 static int ipr_reset_start_bist(struct ipr_cmnd
*ipr_cmd
)
6558 struct ipr_ioa_cfg
*ioa_cfg
= ipr_cmd
->ioa_cfg
;
6562 pci_block_user_cfg_access(ioa_cfg
->pdev
);
6563 rc
= pci_write_config_byte(ioa_cfg
->pdev
, PCI_BIST
, PCI_BIST_START
);
6565 if (rc
!= PCIBIOS_SUCCESSFUL
) {
6566 pci_unblock_user_cfg_access(ipr_cmd
->ioa_cfg
->pdev
);
6567 ipr_cmd
->ioasa
.ioasc
= cpu_to_be32(IPR_IOASC_PCI_ACCESS_ERROR
);
6568 rc
= IPR_RC_JOB_CONTINUE
;
6570 ipr_cmd
->job_step
= ipr_reset_bist_done
;
6571 ipr_reset_start_timer(ipr_cmd
, IPR_WAIT_FOR_BIST_TIMEOUT
);
6572 rc
= IPR_RC_JOB_RETURN
;
6580 * ipr_reset_slot_reset_done - Clear PCI reset to the adapter
6581 * @ipr_cmd: ipr command struct
6583 * Description: This clears PCI reset to the adapter and delays two seconds.
6588 static int ipr_reset_slot_reset_done(struct ipr_cmnd
*ipr_cmd
)
6591 pci_set_pcie_reset_state(ipr_cmd
->ioa_cfg
->pdev
, pcie_deassert_reset
);
6592 ipr_cmd
->job_step
= ipr_reset_bist_done
;
6593 ipr_reset_start_timer(ipr_cmd
, IPR_WAIT_FOR_BIST_TIMEOUT
);
6595 return IPR_RC_JOB_RETURN
;
6599 * ipr_reset_slot_reset - Reset the PCI slot of the adapter.
6600 * @ipr_cmd: ipr command struct
6602 * Description: This asserts PCI reset to the adapter.
6607 static int ipr_reset_slot_reset(struct ipr_cmnd
*ipr_cmd
)
6609 struct ipr_ioa_cfg
*ioa_cfg
= ipr_cmd
->ioa_cfg
;
6610 struct pci_dev
*pdev
= ioa_cfg
->pdev
;
6613 pci_block_user_cfg_access(pdev
);
6614 pci_set_pcie_reset_state(pdev
, pcie_warm_reset
);
6615 ipr_cmd
->job_step
= ipr_reset_slot_reset_done
;
6616 ipr_reset_start_timer(ipr_cmd
, IPR_PCI_RESET_TIMEOUT
);
6618 return IPR_RC_JOB_RETURN
;
6622 * ipr_reset_allowed - Query whether or not IOA can be reset
6623 * @ioa_cfg: ioa config struct
6626 * 0 if reset not allowed / non-zero if reset is allowed
6628 static int ipr_reset_allowed(struct ipr_ioa_cfg
*ioa_cfg
)
6630 volatile u32 temp_reg
;
6632 temp_reg
= readl(ioa_cfg
->regs
.sense_interrupt_reg
);
6633 return ((temp_reg
& IPR_PCII_CRITICAL_OPERATION
) == 0);
6637 * ipr_reset_wait_to_start_bist - Wait for permission to reset IOA.
6638 * @ipr_cmd: ipr command struct
6640 * Description: This function waits for adapter permission to run BIST,
6641 * then runs BIST. If the adapter does not give permission after a
6642 * reasonable time, we will reset the adapter anyway. The impact of
6643 * resetting the adapter without warning the adapter is the risk of
6644 * losing the persistent error log on the adapter. If the adapter is
6645 * reset while it is writing to the flash on the adapter, the flash
6646 * segment will have bad ECC and be zeroed.
6649 * IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
6651 static int ipr_reset_wait_to_start_bist(struct ipr_cmnd
*ipr_cmd
)
6653 struct ipr_ioa_cfg
*ioa_cfg
= ipr_cmd
->ioa_cfg
;
6654 int rc
= IPR_RC_JOB_RETURN
;
6656 if (!ipr_reset_allowed(ioa_cfg
) && ipr_cmd
->u
.time_left
) {
6657 ipr_cmd
->u
.time_left
-= IPR_CHECK_FOR_RESET_TIMEOUT
;
6658 ipr_reset_start_timer(ipr_cmd
, IPR_CHECK_FOR_RESET_TIMEOUT
);
6660 ipr_cmd
->job_step
= ioa_cfg
->reset
;
6661 rc
= IPR_RC_JOB_CONTINUE
;
6668 * ipr_reset_alert_part2 - Alert the adapter of a pending reset
6669 * @ipr_cmd: ipr command struct
6671 * Description: This function alerts the adapter that it will be reset.
6672 * If memory space is not currently enabled, proceed directly
6673 * to running BIST on the adapter. The timer must always be started
6674 * so we guarantee we do not run BIST from ipr_isr.
6679 static int ipr_reset_alert(struct ipr_cmnd
*ipr_cmd
)
6681 struct ipr_ioa_cfg
*ioa_cfg
= ipr_cmd
->ioa_cfg
;
6686 rc
= pci_read_config_word(ioa_cfg
->pdev
, PCI_COMMAND
, &cmd_reg
);
6688 if ((rc
== PCIBIOS_SUCCESSFUL
) && (cmd_reg
& PCI_COMMAND_MEMORY
)) {
6689 ipr_mask_and_clear_interrupts(ioa_cfg
, ~0);
6690 writel(IPR_UPROCI_RESET_ALERT
, ioa_cfg
->regs
.set_uproc_interrupt_reg
);
6691 ipr_cmd
->job_step
= ipr_reset_wait_to_start_bist
;
6693 ipr_cmd
->job_step
= ioa_cfg
->reset
;
6696 ipr_cmd
->u
.time_left
= IPR_WAIT_FOR_RESET_TIMEOUT
;
6697 ipr_reset_start_timer(ipr_cmd
, IPR_CHECK_FOR_RESET_TIMEOUT
);
6700 return IPR_RC_JOB_RETURN
;
6704 * ipr_reset_ucode_download_done - Microcode download completion
6705 * @ipr_cmd: ipr command struct
6707 * Description: This function unmaps the microcode download buffer.
6710 * IPR_RC_JOB_CONTINUE
6712 static int ipr_reset_ucode_download_done(struct ipr_cmnd
*ipr_cmd
)
6714 struct ipr_ioa_cfg
*ioa_cfg
= ipr_cmd
->ioa_cfg
;
6715 struct ipr_sglist
*sglist
= ioa_cfg
->ucode_sglist
;
6717 pci_unmap_sg(ioa_cfg
->pdev
, sglist
->scatterlist
,
6718 sglist
->num_sg
, DMA_TO_DEVICE
);
6720 ipr_cmd
->job_step
= ipr_reset_alert
;
6721 return IPR_RC_JOB_CONTINUE
;
6725 * ipr_reset_ucode_download - Download microcode to the adapter
6726 * @ipr_cmd: ipr command struct
6728 * Description: This function checks to see if it there is microcode
6729 * to download to the adapter. If there is, a download is performed.
6732 * IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
6734 static int ipr_reset_ucode_download(struct ipr_cmnd
*ipr_cmd
)
6736 struct ipr_ioa_cfg
*ioa_cfg
= ipr_cmd
->ioa_cfg
;
6737 struct ipr_sglist
*sglist
= ioa_cfg
->ucode_sglist
;
6740 ipr_cmd
->job_step
= ipr_reset_alert
;
6743 return IPR_RC_JOB_CONTINUE
;
6745 ipr_cmd
->ioarcb
.res_handle
= cpu_to_be32(IPR_IOA_RES_HANDLE
);
6746 ipr_cmd
->ioarcb
.cmd_pkt
.request_type
= IPR_RQTYPE_SCSICDB
;
6747 ipr_cmd
->ioarcb
.cmd_pkt
.cdb
[0] = WRITE_BUFFER
;
6748 ipr_cmd
->ioarcb
.cmd_pkt
.cdb
[1] = IPR_WR_BUF_DOWNLOAD_AND_SAVE
;
6749 ipr_cmd
->ioarcb
.cmd_pkt
.cdb
[6] = (sglist
->buffer_len
& 0xff0000) >> 16;
6750 ipr_cmd
->ioarcb
.cmd_pkt
.cdb
[7] = (sglist
->buffer_len
& 0x00ff00) >> 8;
6751 ipr_cmd
->ioarcb
.cmd_pkt
.cdb
[8] = sglist
->buffer_len
& 0x0000ff;
6753 ipr_build_ucode_ioadl(ipr_cmd
, sglist
);
6754 ipr_cmd
->job_step
= ipr_reset_ucode_download_done
;
6756 ipr_do_req(ipr_cmd
, ipr_reset_ioa_job
, ipr_timeout
,
6757 IPR_WRITE_BUFFER_TIMEOUT
);
6760 return IPR_RC_JOB_RETURN
;
6764 * ipr_reset_shutdown_ioa - Shutdown the adapter
6765 * @ipr_cmd: ipr command struct
6767 * Description: This function issues an adapter shutdown of the
6768 * specified type to the specified adapter as part of the
6769 * adapter reset job.
6772 * IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
6774 static int ipr_reset_shutdown_ioa(struct ipr_cmnd
*ipr_cmd
)
6776 struct ipr_ioa_cfg
*ioa_cfg
= ipr_cmd
->ioa_cfg
;
6777 enum ipr_shutdown_type shutdown_type
= ipr_cmd
->u
.shutdown_type
;
6778 unsigned long timeout
;
6779 int rc
= IPR_RC_JOB_CONTINUE
;
6782 if (shutdown_type
!= IPR_SHUTDOWN_NONE
&& !ioa_cfg
->ioa_is_dead
) {
6783 ipr_cmd
->ioarcb
.res_handle
= cpu_to_be32(IPR_IOA_RES_HANDLE
);
6784 ipr_cmd
->ioarcb
.cmd_pkt
.request_type
= IPR_RQTYPE_IOACMD
;
6785 ipr_cmd
->ioarcb
.cmd_pkt
.cdb
[0] = IPR_IOA_SHUTDOWN
;
6786 ipr_cmd
->ioarcb
.cmd_pkt
.cdb
[1] = shutdown_type
;
6788 if (shutdown_type
== IPR_SHUTDOWN_NORMAL
)
6789 timeout
= IPR_SHUTDOWN_TIMEOUT
;
6790 else if (shutdown_type
== IPR_SHUTDOWN_PREPARE_FOR_NORMAL
)
6791 timeout
= IPR_INTERNAL_TIMEOUT
;
6792 else if (ioa_cfg
->dual_raid
&& ipr_dual_ioa_raid
)
6793 timeout
= IPR_DUAL_IOA_ABBR_SHUTDOWN_TO
;
6795 timeout
= IPR_ABBREV_SHUTDOWN_TIMEOUT
;
6797 ipr_do_req(ipr_cmd
, ipr_reset_ioa_job
, ipr_timeout
, timeout
);
6799 rc
= IPR_RC_JOB_RETURN
;
6800 ipr_cmd
->job_step
= ipr_reset_ucode_download
;
6802 ipr_cmd
->job_step
= ipr_reset_alert
;
6809 * ipr_reset_ioa_job - Adapter reset job
6810 * @ipr_cmd: ipr command struct
6812 * Description: This function is the job router for the adapter reset job.
6817 static void ipr_reset_ioa_job(struct ipr_cmnd
*ipr_cmd
)
6820 struct ipr_ioa_cfg
*ioa_cfg
= ipr_cmd
->ioa_cfg
;
6823 ioasc
= be32_to_cpu(ipr_cmd
->ioasa
.ioasc
);
6825 if (ioa_cfg
->reset_cmd
!= ipr_cmd
) {
6827 * We are doing nested adapter resets and this is
6828 * not the current reset job.
6830 list_add_tail(&ipr_cmd
->queue
, &ioa_cfg
->free_q
);
6834 if (IPR_IOASC_SENSE_KEY(ioasc
)) {
6835 rc
= ipr_cmd
->job_step_failed(ipr_cmd
);
6836 if (rc
== IPR_RC_JOB_RETURN
)
6840 ipr_reinit_ipr_cmnd(ipr_cmd
);
6841 ipr_cmd
->job_step_failed
= ipr_reset_cmd_failed
;
6842 rc
= ipr_cmd
->job_step(ipr_cmd
);
6843 } while(rc
== IPR_RC_JOB_CONTINUE
);
6847 * _ipr_initiate_ioa_reset - Initiate an adapter reset
6848 * @ioa_cfg: ioa config struct
6849 * @job_step: first job step of reset job
6850 * @shutdown_type: shutdown type
6852 * Description: This function will initiate the reset of the given adapter
6853 * starting at the selected job step.
6854 * If the caller needs to wait on the completion of the reset,
6855 * the caller must sleep on the reset_wait_q.
6860 static void _ipr_initiate_ioa_reset(struct ipr_ioa_cfg
*ioa_cfg
,
6861 int (*job_step
) (struct ipr_cmnd
*),
6862 enum ipr_shutdown_type shutdown_type
)
6864 struct ipr_cmnd
*ipr_cmd
;
6866 ioa_cfg
->in_reset_reload
= 1;
6867 ioa_cfg
->allow_cmds
= 0;
6868 scsi_block_requests(ioa_cfg
->host
);
6870 ipr_cmd
= ipr_get_free_ipr_cmnd(ioa_cfg
);
6871 ioa_cfg
->reset_cmd
= ipr_cmd
;
6872 ipr_cmd
->job_step
= job_step
;
6873 ipr_cmd
->u
.shutdown_type
= shutdown_type
;
6875 ipr_reset_ioa_job(ipr_cmd
);
6879 * ipr_initiate_ioa_reset - Initiate an adapter reset
6880 * @ioa_cfg: ioa config struct
6881 * @shutdown_type: shutdown type
6883 * Description: This function will initiate the reset of the given adapter.
6884 * If the caller needs to wait on the completion of the reset,
6885 * the caller must sleep on the reset_wait_q.
6890 static void ipr_initiate_ioa_reset(struct ipr_ioa_cfg
*ioa_cfg
,
6891 enum ipr_shutdown_type shutdown_type
)
6893 if (ioa_cfg
->ioa_is_dead
)
6896 if (ioa_cfg
->in_reset_reload
&& ioa_cfg
->sdt_state
== GET_DUMP
)
6897 ioa_cfg
->sdt_state
= ABORT_DUMP
;
6899 if (ioa_cfg
->reset_retries
++ >= IPR_NUM_RESET_RELOAD_RETRIES
) {
6900 dev_err(&ioa_cfg
->pdev
->dev
,
6901 "IOA taken offline - error recovery failed\n");
6903 ioa_cfg
->reset_retries
= 0;
6904 ioa_cfg
->ioa_is_dead
= 1;
6906 if (ioa_cfg
->in_ioa_bringdown
) {
6907 ioa_cfg
->reset_cmd
= NULL
;
6908 ioa_cfg
->in_reset_reload
= 0;
6909 ipr_fail_all_ops(ioa_cfg
);
6910 wake_up_all(&ioa_cfg
->reset_wait_q
);
6912 spin_unlock_irq(ioa_cfg
->host
->host_lock
);
6913 scsi_unblock_requests(ioa_cfg
->host
);
6914 spin_lock_irq(ioa_cfg
->host
->host_lock
);
6917 ioa_cfg
->in_ioa_bringdown
= 1;
6918 shutdown_type
= IPR_SHUTDOWN_NONE
;
6922 _ipr_initiate_ioa_reset(ioa_cfg
, ipr_reset_shutdown_ioa
,
6927 * ipr_reset_freeze - Hold off all I/O activity
6928 * @ipr_cmd: ipr command struct
6930 * Description: If the PCI slot is frozen, hold off all I/O
6931 * activity; then, as soon as the slot is available again,
6932 * initiate an adapter reset.
6934 static int ipr_reset_freeze(struct ipr_cmnd
*ipr_cmd
)
6936 /* Disallow new interrupts, avoid loop */
6937 ipr_cmd
->ioa_cfg
->allow_interrupts
= 0;
6938 list_add_tail(&ipr_cmd
->queue
, &ipr_cmd
->ioa_cfg
->pending_q
);
6939 ipr_cmd
->done
= ipr_reset_ioa_job
;
6940 return IPR_RC_JOB_RETURN
;
6944 * ipr_pci_frozen - Called when slot has experienced a PCI bus error.
6945 * @pdev: PCI device struct
6947 * Description: This routine is called to tell us that the PCI bus
6948 * is down. Can't do anything here, except put the device driver
6949 * into a holding pattern, waiting for the PCI bus to come back.
6951 static void ipr_pci_frozen(struct pci_dev
*pdev
)
6953 unsigned long flags
= 0;
6954 struct ipr_ioa_cfg
*ioa_cfg
= pci_get_drvdata(pdev
);
6956 spin_lock_irqsave(ioa_cfg
->host
->host_lock
, flags
);
6957 _ipr_initiate_ioa_reset(ioa_cfg
, ipr_reset_freeze
, IPR_SHUTDOWN_NONE
);
6958 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, flags
);
6962 * ipr_pci_slot_reset - Called when PCI slot has been reset.
6963 * @pdev: PCI device struct
6965 * Description: This routine is called by the pci error recovery
6966 * code after the PCI slot has been reset, just before we
6967 * should resume normal operations.
6969 static pci_ers_result_t
ipr_pci_slot_reset(struct pci_dev
*pdev
)
6971 unsigned long flags
= 0;
6972 struct ipr_ioa_cfg
*ioa_cfg
= pci_get_drvdata(pdev
);
6974 spin_lock_irqsave(ioa_cfg
->host
->host_lock
, flags
);
6975 if (ioa_cfg
->needs_warm_reset
)
6976 ipr_initiate_ioa_reset(ioa_cfg
, IPR_SHUTDOWN_NONE
);
6978 _ipr_initiate_ioa_reset(ioa_cfg
, ipr_reset_restore_cfg_space
,
6980 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, flags
);
6981 return PCI_ERS_RESULT_RECOVERED
;
6985 * ipr_pci_perm_failure - Called when PCI slot is dead for good.
6986 * @pdev: PCI device struct
6988 * Description: This routine is called when the PCI bus has
6989 * permanently failed.
6991 static void ipr_pci_perm_failure(struct pci_dev
*pdev
)
6993 unsigned long flags
= 0;
6994 struct ipr_ioa_cfg
*ioa_cfg
= pci_get_drvdata(pdev
);
6996 spin_lock_irqsave(ioa_cfg
->host
->host_lock
, flags
);
6997 if (ioa_cfg
->sdt_state
== WAIT_FOR_DUMP
)
6998 ioa_cfg
->sdt_state
= ABORT_DUMP
;
6999 ioa_cfg
->reset_retries
= IPR_NUM_RESET_RELOAD_RETRIES
;
7000 ioa_cfg
->in_ioa_bringdown
= 1;
7001 ipr_initiate_ioa_reset(ioa_cfg
, IPR_SHUTDOWN_NONE
);
7002 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, flags
);
7006 * ipr_pci_error_detected - Called when a PCI error is detected.
7007 * @pdev: PCI device struct
7008 * @state: PCI channel state
7010 * Description: Called when a PCI error is detected.
7013 * PCI_ERS_RESULT_NEED_RESET or PCI_ERS_RESULT_DISCONNECT
7015 static pci_ers_result_t
ipr_pci_error_detected(struct pci_dev
*pdev
,
7016 pci_channel_state_t state
)
7019 case pci_channel_io_frozen
:
7020 ipr_pci_frozen(pdev
);
7021 return PCI_ERS_RESULT_NEED_RESET
;
7022 case pci_channel_io_perm_failure
:
7023 ipr_pci_perm_failure(pdev
);
7024 return PCI_ERS_RESULT_DISCONNECT
;
7029 return PCI_ERS_RESULT_NEED_RESET
;
7033 * ipr_probe_ioa_part2 - Initializes IOAs found in ipr_probe_ioa(..)
7034 * @ioa_cfg: ioa cfg struct
7036 * Description: This is the second phase of adapter intialization
7037 * This function takes care of initilizing the adapter to the point
7038 * where it can accept new commands.
7041 * 0 on success / -EIO on failure
7043 static int __devinit
ipr_probe_ioa_part2(struct ipr_ioa_cfg
*ioa_cfg
)
7046 unsigned long host_lock_flags
= 0;
7049 spin_lock_irqsave(ioa_cfg
->host
->host_lock
, host_lock_flags
);
7050 dev_dbg(&ioa_cfg
->pdev
->dev
, "ioa_cfg adx: 0x%p\n", ioa_cfg
);
7051 if (ioa_cfg
->needs_hard_reset
) {
7052 ioa_cfg
->needs_hard_reset
= 0;
7053 ipr_initiate_ioa_reset(ioa_cfg
, IPR_SHUTDOWN_NONE
);
7055 _ipr_initiate_ioa_reset(ioa_cfg
, ipr_reset_enable_ioa
,
7058 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, host_lock_flags
);
7059 wait_event(ioa_cfg
->reset_wait_q
, !ioa_cfg
->in_reset_reload
);
7060 spin_lock_irqsave(ioa_cfg
->host
->host_lock
, host_lock_flags
);
7062 if (ioa_cfg
->ioa_is_dead
) {
7064 } else if (ipr_invalid_adapter(ioa_cfg
)) {
7068 dev_err(&ioa_cfg
->pdev
->dev
,
7069 "Adapter not supported in this hardware configuration.\n");
7072 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, host_lock_flags
);
7079 * ipr_free_cmd_blks - Frees command blocks allocated for an adapter
7080 * @ioa_cfg: ioa config struct
7085 static void ipr_free_cmd_blks(struct ipr_ioa_cfg
*ioa_cfg
)
7089 for (i
= 0; i
< IPR_NUM_CMD_BLKS
; i
++) {
7090 if (ioa_cfg
->ipr_cmnd_list
[i
])
7091 pci_pool_free(ioa_cfg
->ipr_cmd_pool
,
7092 ioa_cfg
->ipr_cmnd_list
[i
],
7093 ioa_cfg
->ipr_cmnd_list_dma
[i
]);
7095 ioa_cfg
->ipr_cmnd_list
[i
] = NULL
;
7098 if (ioa_cfg
->ipr_cmd_pool
)
7099 pci_pool_destroy (ioa_cfg
->ipr_cmd_pool
);
7101 ioa_cfg
->ipr_cmd_pool
= NULL
;
7105 * ipr_free_mem - Frees memory allocated for an adapter
7106 * @ioa_cfg: ioa cfg struct
7111 static void ipr_free_mem(struct ipr_ioa_cfg
*ioa_cfg
)
7115 kfree(ioa_cfg
->res_entries
);
7116 pci_free_consistent(ioa_cfg
->pdev
, sizeof(struct ipr_misc_cbs
),
7117 ioa_cfg
->vpd_cbs
, ioa_cfg
->vpd_cbs_dma
);
7118 ipr_free_cmd_blks(ioa_cfg
);
7119 pci_free_consistent(ioa_cfg
->pdev
, sizeof(u32
) * IPR_NUM_CMD_BLKS
,
7120 ioa_cfg
->host_rrq
, ioa_cfg
->host_rrq_dma
);
7121 pci_free_consistent(ioa_cfg
->pdev
, sizeof(struct ipr_config_table
),
7123 ioa_cfg
->cfg_table_dma
);
7125 for (i
= 0; i
< IPR_NUM_HCAMS
; i
++) {
7126 pci_free_consistent(ioa_cfg
->pdev
,
7127 sizeof(struct ipr_hostrcb
),
7128 ioa_cfg
->hostrcb
[i
],
7129 ioa_cfg
->hostrcb_dma
[i
]);
7132 ipr_free_dump(ioa_cfg
);
7133 kfree(ioa_cfg
->trace
);
7137 * ipr_free_all_resources - Free all allocated resources for an adapter.
7138 * @ipr_cmd: ipr command struct
7140 * This function frees all allocated resources for the
7141 * specified adapter.
7146 static void ipr_free_all_resources(struct ipr_ioa_cfg
*ioa_cfg
)
7148 struct pci_dev
*pdev
= ioa_cfg
->pdev
;
7151 free_irq(pdev
->irq
, ioa_cfg
);
7152 pci_disable_msi(pdev
);
7153 iounmap(ioa_cfg
->hdw_dma_regs
);
7154 pci_release_regions(pdev
);
7155 ipr_free_mem(ioa_cfg
);
7156 scsi_host_put(ioa_cfg
->host
);
7157 pci_disable_device(pdev
);
7162 * ipr_alloc_cmd_blks - Allocate command blocks for an adapter
7163 * @ioa_cfg: ioa config struct
7166 * 0 on success / -ENOMEM on allocation failure
7168 static int __devinit
ipr_alloc_cmd_blks(struct ipr_ioa_cfg
*ioa_cfg
)
7170 struct ipr_cmnd
*ipr_cmd
;
7171 struct ipr_ioarcb
*ioarcb
;
7172 dma_addr_t dma_addr
;
7175 ioa_cfg
->ipr_cmd_pool
= pci_pool_create (IPR_NAME
, ioa_cfg
->pdev
,
7176 sizeof(struct ipr_cmnd
), 8, 0);
7178 if (!ioa_cfg
->ipr_cmd_pool
)
7181 for (i
= 0; i
< IPR_NUM_CMD_BLKS
; i
++) {
7182 ipr_cmd
= pci_pool_alloc (ioa_cfg
->ipr_cmd_pool
, GFP_KERNEL
, &dma_addr
);
7185 ipr_free_cmd_blks(ioa_cfg
);
7189 memset(ipr_cmd
, 0, sizeof(*ipr_cmd
));
7190 ioa_cfg
->ipr_cmnd_list
[i
] = ipr_cmd
;
7191 ioa_cfg
->ipr_cmnd_list_dma
[i
] = dma_addr
;
7193 ioarcb
= &ipr_cmd
->ioarcb
;
7194 ioarcb
->ioarcb_host_pci_addr
= cpu_to_be32(dma_addr
);
7195 ioarcb
->host_response_handle
= cpu_to_be32(i
<< 2);
7196 ioarcb
->write_ioadl_addr
=
7197 cpu_to_be32(dma_addr
+ offsetof(struct ipr_cmnd
, ioadl
));
7198 ioarcb
->read_ioadl_addr
= ioarcb
->write_ioadl_addr
;
7199 ioarcb
->ioasa_host_pci_addr
=
7200 cpu_to_be32(dma_addr
+ offsetof(struct ipr_cmnd
, ioasa
));
7201 ioarcb
->ioasa_len
= cpu_to_be16(sizeof(struct ipr_ioasa
));
7202 ipr_cmd
->cmd_index
= i
;
7203 ipr_cmd
->ioa_cfg
= ioa_cfg
;
7204 ipr_cmd
->sense_buffer_dma
= dma_addr
+
7205 offsetof(struct ipr_cmnd
, sense_buffer
);
7207 list_add_tail(&ipr_cmd
->queue
, &ioa_cfg
->free_q
);
7214 * ipr_alloc_mem - Allocate memory for an adapter
7215 * @ioa_cfg: ioa config struct
7218 * 0 on success / non-zero for error
7220 static int __devinit
ipr_alloc_mem(struct ipr_ioa_cfg
*ioa_cfg
)
7222 struct pci_dev
*pdev
= ioa_cfg
->pdev
;
7223 int i
, rc
= -ENOMEM
;
7226 ioa_cfg
->res_entries
= kzalloc(sizeof(struct ipr_resource_entry
) *
7227 IPR_MAX_PHYSICAL_DEVS
, GFP_KERNEL
);
7229 if (!ioa_cfg
->res_entries
)
7232 for (i
= 0; i
< IPR_MAX_PHYSICAL_DEVS
; i
++)
7233 list_add_tail(&ioa_cfg
->res_entries
[i
].queue
, &ioa_cfg
->free_res_q
);
7235 ioa_cfg
->vpd_cbs
= pci_alloc_consistent(ioa_cfg
->pdev
,
7236 sizeof(struct ipr_misc_cbs
),
7237 &ioa_cfg
->vpd_cbs_dma
);
7239 if (!ioa_cfg
->vpd_cbs
)
7240 goto out_free_res_entries
;
7242 if (ipr_alloc_cmd_blks(ioa_cfg
))
7243 goto out_free_vpd_cbs
;
7245 ioa_cfg
->host_rrq
= pci_alloc_consistent(ioa_cfg
->pdev
,
7246 sizeof(u32
) * IPR_NUM_CMD_BLKS
,
7247 &ioa_cfg
->host_rrq_dma
);
7249 if (!ioa_cfg
->host_rrq
)
7250 goto out_ipr_free_cmd_blocks
;
7252 ioa_cfg
->cfg_table
= pci_alloc_consistent(ioa_cfg
->pdev
,
7253 sizeof(struct ipr_config_table
),
7254 &ioa_cfg
->cfg_table_dma
);
7256 if (!ioa_cfg
->cfg_table
)
7257 goto out_free_host_rrq
;
7259 for (i
= 0; i
< IPR_NUM_HCAMS
; i
++) {
7260 ioa_cfg
->hostrcb
[i
] = pci_alloc_consistent(ioa_cfg
->pdev
,
7261 sizeof(struct ipr_hostrcb
),
7262 &ioa_cfg
->hostrcb_dma
[i
]);
7264 if (!ioa_cfg
->hostrcb
[i
])
7265 goto out_free_hostrcb_dma
;
7267 ioa_cfg
->hostrcb
[i
]->hostrcb_dma
=
7268 ioa_cfg
->hostrcb_dma
[i
] + offsetof(struct ipr_hostrcb
, hcam
);
7269 ioa_cfg
->hostrcb
[i
]->ioa_cfg
= ioa_cfg
;
7270 list_add_tail(&ioa_cfg
->hostrcb
[i
]->queue
, &ioa_cfg
->hostrcb_free_q
);
7273 ioa_cfg
->trace
= kzalloc(sizeof(struct ipr_trace_entry
) *
7274 IPR_NUM_TRACE_ENTRIES
, GFP_KERNEL
);
7276 if (!ioa_cfg
->trace
)
7277 goto out_free_hostrcb_dma
;
7284 out_free_hostrcb_dma
:
7286 pci_free_consistent(pdev
, sizeof(struct ipr_hostrcb
),
7287 ioa_cfg
->hostrcb
[i
],
7288 ioa_cfg
->hostrcb_dma
[i
]);
7290 pci_free_consistent(pdev
, sizeof(struct ipr_config_table
),
7291 ioa_cfg
->cfg_table
, ioa_cfg
->cfg_table_dma
);
7293 pci_free_consistent(pdev
, sizeof(u32
) * IPR_NUM_CMD_BLKS
,
7294 ioa_cfg
->host_rrq
, ioa_cfg
->host_rrq_dma
);
7295 out_ipr_free_cmd_blocks
:
7296 ipr_free_cmd_blks(ioa_cfg
);
7298 pci_free_consistent(pdev
, sizeof(struct ipr_misc_cbs
),
7299 ioa_cfg
->vpd_cbs
, ioa_cfg
->vpd_cbs_dma
);
7300 out_free_res_entries
:
7301 kfree(ioa_cfg
->res_entries
);
7306 * ipr_initialize_bus_attr - Initialize SCSI bus attributes to default values
7307 * @ioa_cfg: ioa config struct
7312 static void __devinit
ipr_initialize_bus_attr(struct ipr_ioa_cfg
*ioa_cfg
)
7316 for (i
= 0; i
< IPR_MAX_NUM_BUSES
; i
++) {
7317 ioa_cfg
->bus_attr
[i
].bus
= i
;
7318 ioa_cfg
->bus_attr
[i
].qas_enabled
= 0;
7319 ioa_cfg
->bus_attr
[i
].bus_width
= IPR_DEFAULT_BUS_WIDTH
;
7320 if (ipr_max_speed
< ARRAY_SIZE(ipr_max_bus_speeds
))
7321 ioa_cfg
->bus_attr
[i
].max_xfer_rate
= ipr_max_bus_speeds
[ipr_max_speed
];
7323 ioa_cfg
->bus_attr
[i
].max_xfer_rate
= IPR_U160_SCSI_RATE
;
7328 * ipr_init_ioa_cfg - Initialize IOA config struct
7329 * @ioa_cfg: ioa config struct
7330 * @host: scsi host struct
7331 * @pdev: PCI dev struct
7336 static void __devinit
ipr_init_ioa_cfg(struct ipr_ioa_cfg
*ioa_cfg
,
7337 struct Scsi_Host
*host
, struct pci_dev
*pdev
)
7339 const struct ipr_interrupt_offsets
*p
;
7340 struct ipr_interrupts
*t
;
7343 ioa_cfg
->host
= host
;
7344 ioa_cfg
->pdev
= pdev
;
7345 ioa_cfg
->log_level
= ipr_log_level
;
7346 ioa_cfg
->doorbell
= IPR_DOORBELL
;
7347 sprintf(ioa_cfg
->eye_catcher
, IPR_EYECATCHER
);
7348 sprintf(ioa_cfg
->trace_start
, IPR_TRACE_START_LABEL
);
7349 sprintf(ioa_cfg
->ipr_free_label
, IPR_FREEQ_LABEL
);
7350 sprintf(ioa_cfg
->ipr_pending_label
, IPR_PENDQ_LABEL
);
7351 sprintf(ioa_cfg
->cfg_table_start
, IPR_CFG_TBL_START
);
7352 sprintf(ioa_cfg
->resource_table_label
, IPR_RES_TABLE_LABEL
);
7353 sprintf(ioa_cfg
->ipr_hcam_label
, IPR_HCAM_LABEL
);
7354 sprintf(ioa_cfg
->ipr_cmd_label
, IPR_CMD_LABEL
);
7356 INIT_LIST_HEAD(&ioa_cfg
->free_q
);
7357 INIT_LIST_HEAD(&ioa_cfg
->pending_q
);
7358 INIT_LIST_HEAD(&ioa_cfg
->hostrcb_free_q
);
7359 INIT_LIST_HEAD(&ioa_cfg
->hostrcb_pending_q
);
7360 INIT_LIST_HEAD(&ioa_cfg
->free_res_q
);
7361 INIT_LIST_HEAD(&ioa_cfg
->used_res_q
);
7362 INIT_WORK(&ioa_cfg
->work_q
, ipr_worker_thread
);
7363 init_waitqueue_head(&ioa_cfg
->reset_wait_q
);
7364 ioa_cfg
->sdt_state
= INACTIVE
;
7365 if (ipr_enable_cache
)
7366 ioa_cfg
->cache_state
= CACHE_ENABLED
;
7368 ioa_cfg
->cache_state
= CACHE_DISABLED
;
7370 ipr_initialize_bus_attr(ioa_cfg
);
7372 host
->max_id
= IPR_MAX_NUM_TARGETS_PER_BUS
;
7373 host
->max_lun
= IPR_MAX_NUM_LUNS_PER_TARGET
;
7374 host
->max_channel
= IPR_MAX_BUS_TO_SCAN
;
7375 host
->unique_id
= host
->host_no
;
7376 host
->max_cmd_len
= IPR_MAX_CDB_LEN
;
7377 pci_set_drvdata(pdev
, ioa_cfg
);
7379 p
= &ioa_cfg
->chip_cfg
->regs
;
7381 base
= ioa_cfg
->hdw_dma_regs
;
7383 t
->set_interrupt_mask_reg
= base
+ p
->set_interrupt_mask_reg
;
7384 t
->clr_interrupt_mask_reg
= base
+ p
->clr_interrupt_mask_reg
;
7385 t
->sense_interrupt_mask_reg
= base
+ p
->sense_interrupt_mask_reg
;
7386 t
->clr_interrupt_reg
= base
+ p
->clr_interrupt_reg
;
7387 t
->sense_interrupt_reg
= base
+ p
->sense_interrupt_reg
;
7388 t
->ioarrin_reg
= base
+ p
->ioarrin_reg
;
7389 t
->sense_uproc_interrupt_reg
= base
+ p
->sense_uproc_interrupt_reg
;
7390 t
->set_uproc_interrupt_reg
= base
+ p
->set_uproc_interrupt_reg
;
7391 t
->clr_uproc_interrupt_reg
= base
+ p
->clr_uproc_interrupt_reg
;
7395 * ipr_get_chip_cfg - Find adapter chip configuration
7396 * @dev_id: PCI device id struct
7399 * ptr to chip config on success / NULL on failure
7401 static const struct ipr_chip_cfg_t
* __devinit
7402 ipr_get_chip_cfg(const struct pci_device_id
*dev_id
)
7406 for (i
= 0; i
< ARRAY_SIZE(ipr_chip
); i
++)
7407 if (ipr_chip
[i
].vendor
== dev_id
->vendor
&&
7408 ipr_chip
[i
].device
== dev_id
->device
)
7409 return ipr_chip
[i
].cfg
;
7414 * ipr_probe_ioa - Allocates memory and does first stage of initialization
7415 * @pdev: PCI device struct
7416 * @dev_id: PCI device id struct
7419 * 0 on success / non-zero on failure
7421 static int __devinit
ipr_probe_ioa(struct pci_dev
*pdev
,
7422 const struct pci_device_id
*dev_id
)
7424 struct ipr_ioa_cfg
*ioa_cfg
;
7425 struct Scsi_Host
*host
;
7426 unsigned long ipr_regs_pci
;
7427 void __iomem
*ipr_regs
;
7428 int rc
= PCIBIOS_SUCCESSFUL
;
7429 volatile u32 mask
, uproc
, interrupts
;
7433 if ((rc
= pci_enable_device(pdev
))) {
7434 dev_err(&pdev
->dev
, "Cannot enable adapter\n");
7438 if (!(rc
= pci_enable_msi(pdev
)))
7439 dev_info(&pdev
->dev
, "MSI enabled\n");
7441 dev_info(&pdev
->dev
, "Cannot enable MSI\n");
7443 dev_info(&pdev
->dev
, "Found IOA with IRQ: %d\n", pdev
->irq
);
7445 host
= scsi_host_alloc(&driver_template
, sizeof(*ioa_cfg
));
7448 dev_err(&pdev
->dev
, "call to scsi_host_alloc failed!\n");
7453 ioa_cfg
= (struct ipr_ioa_cfg
*)host
->hostdata
;
7454 memset(ioa_cfg
, 0, sizeof(struct ipr_ioa_cfg
));
7455 ata_host_init(&ioa_cfg
->ata_host
, &pdev
->dev
,
7456 sata_port_info
.flags
, &ipr_sata_ops
);
7458 ioa_cfg
->chip_cfg
= ipr_get_chip_cfg(dev_id
);
7460 if (!ioa_cfg
->chip_cfg
) {
7461 dev_err(&pdev
->dev
, "Unknown adapter chipset 0x%04X 0x%04X\n",
7462 dev_id
->vendor
, dev_id
->device
);
7463 goto out_scsi_host_put
;
7466 if (ipr_transop_timeout
)
7467 ioa_cfg
->transop_timeout
= ipr_transop_timeout
;
7468 else if (dev_id
->driver_data
& IPR_USE_LONG_TRANSOP_TIMEOUT
)
7469 ioa_cfg
->transop_timeout
= IPR_LONG_OPERATIONAL_TIMEOUT
;
7471 ioa_cfg
->transop_timeout
= IPR_OPERATIONAL_TIMEOUT
;
7473 ioa_cfg
->revid
= pdev
->revision
;
7475 ipr_regs_pci
= pci_resource_start(pdev
, 0);
7477 rc
= pci_request_regions(pdev
, IPR_NAME
);
7480 "Couldn't register memory range of registers\n");
7481 goto out_scsi_host_put
;
7484 ipr_regs
= pci_ioremap_bar(pdev
, 0);
7488 "Couldn't map memory range of registers\n");
7490 goto out_release_regions
;
7493 ioa_cfg
->hdw_dma_regs
= ipr_regs
;
7494 ioa_cfg
->hdw_dma_regs_pci
= ipr_regs_pci
;
7495 ioa_cfg
->ioa_mailbox
= ioa_cfg
->chip_cfg
->mailbox
+ ipr_regs
;
7497 ipr_init_ioa_cfg(ioa_cfg
, host
, pdev
);
7499 pci_set_master(pdev
);
7501 rc
= pci_set_dma_mask(pdev
, DMA_BIT_MASK(32));
7503 dev_err(&pdev
->dev
, "Failed to set PCI DMA mask\n");
7507 rc
= pci_write_config_byte(pdev
, PCI_CACHE_LINE_SIZE
,
7508 ioa_cfg
->chip_cfg
->cache_line_size
);
7510 if (rc
!= PCIBIOS_SUCCESSFUL
) {
7511 dev_err(&pdev
->dev
, "Write of cache line size failed\n");
7516 /* Save away PCI config space for use following IOA reset */
7517 rc
= pci_save_state(pdev
);
7519 if (rc
!= PCIBIOS_SUCCESSFUL
) {
7520 dev_err(&pdev
->dev
, "Failed to save PCI config space\n");
7525 if ((rc
= ipr_save_pcix_cmd_reg(ioa_cfg
)))
7528 if ((rc
= ipr_set_pcix_cmd_reg(ioa_cfg
)))
7531 rc
= ipr_alloc_mem(ioa_cfg
);
7534 "Couldn't allocate enough memory for device driver!\n");
7539 * If HRRQ updated interrupt is not masked, or reset alert is set,
7540 * the card is in an unknown state and needs a hard reset
7542 mask
= readl(ioa_cfg
->regs
.sense_interrupt_mask_reg
);
7543 interrupts
= readl(ioa_cfg
->regs
.sense_interrupt_reg
);
7544 uproc
= readl(ioa_cfg
->regs
.sense_uproc_interrupt_reg
);
7545 if ((mask
& IPR_PCII_HRRQ_UPDATED
) == 0 || (uproc
& IPR_UPROCI_RESET_ALERT
))
7546 ioa_cfg
->needs_hard_reset
= 1;
7547 if (interrupts
& IPR_PCII_ERROR_INTERRUPTS
)
7548 ioa_cfg
->needs_hard_reset
= 1;
7549 if (interrupts
& IPR_PCII_IOA_UNIT_CHECKED
)
7550 ioa_cfg
->ioa_unit_checked
= 1;
7552 ipr_mask_and_clear_interrupts(ioa_cfg
, ~IPR_PCII_IOA_TRANS_TO_OPER
);
7553 rc
= request_irq(pdev
->irq
, ipr_isr
, IRQF_SHARED
, IPR_NAME
, ioa_cfg
);
7556 dev_err(&pdev
->dev
, "Couldn't register IRQ %d! rc=%d\n",
7561 if ((dev_id
->driver_data
& IPR_USE_PCI_WARM_RESET
) ||
7562 (dev_id
->device
== PCI_DEVICE_ID_IBM_OBSIDIAN_E
&& !ioa_cfg
->revid
)) {
7563 ioa_cfg
->needs_warm_reset
= 1;
7564 ioa_cfg
->reset
= ipr_reset_slot_reset
;
7566 ioa_cfg
->reset
= ipr_reset_start_bist
;
7568 spin_lock(&ipr_driver_lock
);
7569 list_add_tail(&ioa_cfg
->queue
, &ipr_ioa_head
);
7570 spin_unlock(&ipr_driver_lock
);
7577 ipr_free_mem(ioa_cfg
);
7580 out_release_regions
:
7581 pci_release_regions(pdev
);
7583 scsi_host_put(host
);
7585 pci_disable_msi(pdev
);
7586 pci_disable_device(pdev
);
7591 * ipr_scan_vsets - Scans for VSET devices
7592 * @ioa_cfg: ioa config struct
7594 * Description: Since the VSET resources do not follow SAM in that we can have
7595 * sparse LUNs with no LUN 0, we have to scan for these ourselves.
7600 static void ipr_scan_vsets(struct ipr_ioa_cfg
*ioa_cfg
)
7604 for (target
= 0; target
< IPR_MAX_NUM_TARGETS_PER_BUS
; target
++)
7605 for (lun
= 0; lun
< IPR_MAX_NUM_VSET_LUNS_PER_TARGET
; lun
++ )
7606 scsi_add_device(ioa_cfg
->host
, IPR_VSET_BUS
, target
, lun
);
7610 * ipr_initiate_ioa_bringdown - Bring down an adapter
7611 * @ioa_cfg: ioa config struct
7612 * @shutdown_type: shutdown type
7614 * Description: This function will initiate bringing down the adapter.
7615 * This consists of issuing an IOA shutdown to the adapter
7616 * to flush the cache, and running BIST.
7617 * If the caller needs to wait on the completion of the reset,
7618 * the caller must sleep on the reset_wait_q.
7623 static void ipr_initiate_ioa_bringdown(struct ipr_ioa_cfg
*ioa_cfg
,
7624 enum ipr_shutdown_type shutdown_type
)
7627 if (ioa_cfg
->sdt_state
== WAIT_FOR_DUMP
)
7628 ioa_cfg
->sdt_state
= ABORT_DUMP
;
7629 ioa_cfg
->reset_retries
= 0;
7630 ioa_cfg
->in_ioa_bringdown
= 1;
7631 ipr_initiate_ioa_reset(ioa_cfg
, shutdown_type
);
7636 * __ipr_remove - Remove a single adapter
7637 * @pdev: pci device struct
7639 * Adapter hot plug remove entry point.
7644 static void __ipr_remove(struct pci_dev
*pdev
)
7646 unsigned long host_lock_flags
= 0;
7647 struct ipr_ioa_cfg
*ioa_cfg
= pci_get_drvdata(pdev
);
7650 spin_lock_irqsave(ioa_cfg
->host
->host_lock
, host_lock_flags
);
7651 while(ioa_cfg
->in_reset_reload
) {
7652 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, host_lock_flags
);
7653 wait_event(ioa_cfg
->reset_wait_q
, !ioa_cfg
->in_reset_reload
);
7654 spin_lock_irqsave(ioa_cfg
->host
->host_lock
, host_lock_flags
);
7657 ipr_initiate_ioa_bringdown(ioa_cfg
, IPR_SHUTDOWN_NORMAL
);
7659 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, host_lock_flags
);
7660 wait_event(ioa_cfg
->reset_wait_q
, !ioa_cfg
->in_reset_reload
);
7661 flush_scheduled_work();
7662 spin_lock_irqsave(ioa_cfg
->host
->host_lock
, host_lock_flags
);
7664 spin_lock(&ipr_driver_lock
);
7665 list_del(&ioa_cfg
->queue
);
7666 spin_unlock(&ipr_driver_lock
);
7668 if (ioa_cfg
->sdt_state
== ABORT_DUMP
)
7669 ioa_cfg
->sdt_state
= WAIT_FOR_DUMP
;
7670 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, host_lock_flags
);
7672 ipr_free_all_resources(ioa_cfg
);
7678 * ipr_remove - IOA hot plug remove entry point
7679 * @pdev: pci device struct
7681 * Adapter hot plug remove entry point.
7686 static void ipr_remove(struct pci_dev
*pdev
)
7688 struct ipr_ioa_cfg
*ioa_cfg
= pci_get_drvdata(pdev
);
7692 ipr_remove_trace_file(&ioa_cfg
->host
->shost_dev
.kobj
,
7694 ipr_remove_dump_file(&ioa_cfg
->host
->shost_dev
.kobj
,
7696 scsi_remove_host(ioa_cfg
->host
);
7704 * ipr_probe - Adapter hot plug add entry point
7707 * 0 on success / non-zero on failure
7709 static int __devinit
ipr_probe(struct pci_dev
*pdev
,
7710 const struct pci_device_id
*dev_id
)
7712 struct ipr_ioa_cfg
*ioa_cfg
;
7715 rc
= ipr_probe_ioa(pdev
, dev_id
);
7720 ioa_cfg
= pci_get_drvdata(pdev
);
7721 rc
= ipr_probe_ioa_part2(ioa_cfg
);
7728 rc
= scsi_add_host(ioa_cfg
->host
, &pdev
->dev
);
7735 rc
= ipr_create_trace_file(&ioa_cfg
->host
->shost_dev
.kobj
,
7739 scsi_remove_host(ioa_cfg
->host
);
7744 rc
= ipr_create_dump_file(&ioa_cfg
->host
->shost_dev
.kobj
,
7748 ipr_remove_trace_file(&ioa_cfg
->host
->shost_dev
.kobj
,
7750 scsi_remove_host(ioa_cfg
->host
);
7755 scsi_scan_host(ioa_cfg
->host
);
7756 ipr_scan_vsets(ioa_cfg
);
7757 scsi_add_device(ioa_cfg
->host
, IPR_IOA_BUS
, IPR_IOA_TARGET
, IPR_IOA_LUN
);
7758 ioa_cfg
->allow_ml_add_del
= 1;
7759 ioa_cfg
->host
->max_channel
= IPR_VSET_BUS
;
7760 schedule_work(&ioa_cfg
->work_q
);
7765 * ipr_shutdown - Shutdown handler.
7766 * @pdev: pci device struct
7768 * This function is invoked upon system shutdown/reboot. It will issue
7769 * an adapter shutdown to the adapter to flush the write cache.
7774 static void ipr_shutdown(struct pci_dev
*pdev
)
7776 struct ipr_ioa_cfg
*ioa_cfg
= pci_get_drvdata(pdev
);
7777 unsigned long lock_flags
= 0;
7779 spin_lock_irqsave(ioa_cfg
->host
->host_lock
, lock_flags
);
7780 while(ioa_cfg
->in_reset_reload
) {
7781 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
7782 wait_event(ioa_cfg
->reset_wait_q
, !ioa_cfg
->in_reset_reload
);
7783 spin_lock_irqsave(ioa_cfg
->host
->host_lock
, lock_flags
);
7786 ipr_initiate_ioa_bringdown(ioa_cfg
, IPR_SHUTDOWN_NORMAL
);
7787 spin_unlock_irqrestore(ioa_cfg
->host
->host_lock
, lock_flags
);
7788 wait_event(ioa_cfg
->reset_wait_q
, !ioa_cfg
->in_reset_reload
);
7791 static struct pci_device_id ipr_pci_table
[] __devinitdata
= {
7792 { PCI_VENDOR_ID_MYLEX
, PCI_DEVICE_ID_IBM_GEMSTONE
,
7793 PCI_VENDOR_ID_IBM
, IPR_SUBS_DEV_ID_5702
, 0, 0, 0 },
7794 { PCI_VENDOR_ID_MYLEX
, PCI_DEVICE_ID_IBM_GEMSTONE
,
7795 PCI_VENDOR_ID_IBM
, IPR_SUBS_DEV_ID_5703
, 0, 0, 0 },
7796 { PCI_VENDOR_ID_MYLEX
, PCI_DEVICE_ID_IBM_GEMSTONE
,
7797 PCI_VENDOR_ID_IBM
, IPR_SUBS_DEV_ID_573D
, 0, 0, 0 },
7798 { PCI_VENDOR_ID_MYLEX
, PCI_DEVICE_ID_IBM_GEMSTONE
,
7799 PCI_VENDOR_ID_IBM
, IPR_SUBS_DEV_ID_573E
, 0, 0, 0 },
7800 { PCI_VENDOR_ID_IBM
, PCI_DEVICE_ID_IBM_CITRINE
,
7801 PCI_VENDOR_ID_IBM
, IPR_SUBS_DEV_ID_571B
, 0, 0, 0 },
7802 { PCI_VENDOR_ID_IBM
, PCI_DEVICE_ID_IBM_CITRINE
,
7803 PCI_VENDOR_ID_IBM
, IPR_SUBS_DEV_ID_572E
, 0, 0, 0 },
7804 { PCI_VENDOR_ID_IBM
, PCI_DEVICE_ID_IBM_CITRINE
,
7805 PCI_VENDOR_ID_IBM
, IPR_SUBS_DEV_ID_571A
, 0, 0, 0 },
7806 { PCI_VENDOR_ID_IBM
, PCI_DEVICE_ID_IBM_CITRINE
,
7807 PCI_VENDOR_ID_IBM
, IPR_SUBS_DEV_ID_575B
, 0, 0,
7808 IPR_USE_LONG_TRANSOP_TIMEOUT
},
7809 { PCI_VENDOR_ID_ADAPTEC2
, PCI_DEVICE_ID_ADAPTEC2_OBSIDIAN
,
7810 PCI_VENDOR_ID_IBM
, IPR_SUBS_DEV_ID_572A
, 0, 0, 0 },
7811 { PCI_VENDOR_ID_ADAPTEC2
, PCI_DEVICE_ID_ADAPTEC2_OBSIDIAN
,
7812 PCI_VENDOR_ID_IBM
, IPR_SUBS_DEV_ID_572B
, 0, 0,
7813 IPR_USE_LONG_TRANSOP_TIMEOUT
},
7814 { PCI_VENDOR_ID_ADAPTEC2
, PCI_DEVICE_ID_ADAPTEC2_OBSIDIAN
,
7815 PCI_VENDOR_ID_IBM
, IPR_SUBS_DEV_ID_575C
, 0, 0,
7816 IPR_USE_LONG_TRANSOP_TIMEOUT
},
7817 { PCI_VENDOR_ID_IBM
, PCI_DEVICE_ID_IBM_OBSIDIAN
,
7818 PCI_VENDOR_ID_IBM
, IPR_SUBS_DEV_ID_572A
, 0, 0, 0 },
7819 { PCI_VENDOR_ID_IBM
, PCI_DEVICE_ID_IBM_OBSIDIAN
,
7820 PCI_VENDOR_ID_IBM
, IPR_SUBS_DEV_ID_572B
, 0, 0,
7821 IPR_USE_LONG_TRANSOP_TIMEOUT
},
7822 { PCI_VENDOR_ID_IBM
, PCI_DEVICE_ID_IBM_OBSIDIAN
,
7823 PCI_VENDOR_ID_IBM
, IPR_SUBS_DEV_ID_575C
, 0, 0,
7824 IPR_USE_LONG_TRANSOP_TIMEOUT
},
7825 { PCI_VENDOR_ID_IBM
, PCI_DEVICE_ID_IBM_OBSIDIAN_E
,
7826 PCI_VENDOR_ID_IBM
, IPR_SUBS_DEV_ID_574E
, 0, 0,
7827 IPR_USE_LONG_TRANSOP_TIMEOUT
},
7828 { PCI_VENDOR_ID_IBM
, PCI_DEVICE_ID_IBM_OBSIDIAN_E
,
7829 PCI_VENDOR_ID_IBM
, IPR_SUBS_DEV_ID_575D
, 0, 0,
7830 IPR_USE_LONG_TRANSOP_TIMEOUT
},
7831 { PCI_VENDOR_ID_IBM
, PCI_DEVICE_ID_IBM_OBSIDIAN_E
,
7832 PCI_VENDOR_ID_IBM
, IPR_SUBS_DEV_ID_57B3
, 0, 0, 0 },
7833 { PCI_VENDOR_ID_IBM
, PCI_DEVICE_ID_IBM_OBSIDIAN_E
,
7834 PCI_VENDOR_ID_IBM
, IPR_SUBS_DEV_ID_57B7
, 0, 0,
7835 IPR_USE_LONG_TRANSOP_TIMEOUT
| IPR_USE_PCI_WARM_RESET
},
7836 { PCI_VENDOR_ID_IBM
, PCI_DEVICE_ID_IBM_SNIPE
,
7837 PCI_VENDOR_ID_IBM
, IPR_SUBS_DEV_ID_2780
, 0, 0, 0 },
7838 { PCI_VENDOR_ID_ADAPTEC2
, PCI_DEVICE_ID_ADAPTEC2_SCAMP
,
7839 PCI_VENDOR_ID_IBM
, IPR_SUBS_DEV_ID_571E
, 0, 0, 0 },
7840 { PCI_VENDOR_ID_ADAPTEC2
, PCI_DEVICE_ID_ADAPTEC2_SCAMP
,
7841 PCI_VENDOR_ID_IBM
, IPR_SUBS_DEV_ID_571F
, 0, 0,
7842 IPR_USE_LONG_TRANSOP_TIMEOUT
},
7843 { PCI_VENDOR_ID_ADAPTEC2
, PCI_DEVICE_ID_ADAPTEC2_SCAMP
,
7844 PCI_VENDOR_ID_IBM
, IPR_SUBS_DEV_ID_572F
, 0, 0,
7845 IPR_USE_LONG_TRANSOP_TIMEOUT
},
7846 { PCI_VENDOR_ID_IBM
, PCI_DEVICE_ID_IBM_SCAMP_E
,
7847 PCI_VENDOR_ID_IBM
, IPR_SUBS_DEV_ID_574D
, 0, 0,
7848 IPR_USE_LONG_TRANSOP_TIMEOUT
},
7851 MODULE_DEVICE_TABLE(pci
, ipr_pci_table
);
7853 static struct pci_error_handlers ipr_err_handler
= {
7854 .error_detected
= ipr_pci_error_detected
,
7855 .slot_reset
= ipr_pci_slot_reset
,
7858 static struct pci_driver ipr_driver
= {
7860 .id_table
= ipr_pci_table
,
7862 .remove
= ipr_remove
,
7863 .shutdown
= ipr_shutdown
,
7864 .err_handler
= &ipr_err_handler
,
7868 * ipr_init - Module entry point
7871 * 0 on success / negative value on failure
7873 static int __init
ipr_init(void)
7875 ipr_info("IBM Power RAID SCSI Device Driver version: %s %s\n",
7876 IPR_DRIVER_VERSION
, IPR_DRIVER_DATE
);
7878 return pci_register_driver(&ipr_driver
);
7882 * ipr_exit - Module unload
7884 * Module unload entry point.
7889 static void __exit
ipr_exit(void)
7891 pci_unregister_driver(&ipr_driver
);
7894 module_init(ipr_init
);
7895 module_exit(ipr_exit
);