2 * Sonics Silicon Backplane
3 * Broadcom EXTIF core driver
5 * Copyright 2005, Broadcom Corporation
6 * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
7 * Copyright 2006, 2007, Felix Fietkau <nbd@openwrt.org>
8 * Copyright 2007, Aurelien Jarno <aurelien@aurel32.net>
10 * Licensed under the GNU/GPL. See COPYING for details.
13 #include <linux/serial.h>
14 #include <linux/serial_core.h>
15 #include <linux/serial_reg.h>
17 #include "ssb_private.h"
20 static inline u32
extif_read32(struct ssb_extif
*extif
, u16 offset
)
22 return ssb_read32(extif
->dev
, offset
);
25 static inline void extif_write32(struct ssb_extif
*extif
, u16 offset
, u32 value
)
27 ssb_write32(extif
->dev
, offset
, value
);
30 static inline void extif_write32_masked(struct ssb_extif
*extif
, u16 offset
,
34 value
|= extif_read32(extif
, offset
) & ~mask
;
35 extif_write32(extif
, offset
, value
);
38 #ifdef CONFIG_SSB_SERIAL
39 static bool serial_exists(u8
*regs
)
44 save_mcr
= regs
[UART_MCR
];
45 regs
[UART_MCR
] = (UART_MCR_LOOP
| UART_MCR_OUT2
| UART_MCR_RTS
);
46 msr
= regs
[UART_MSR
] & (UART_MSR_DCD
| UART_MSR_RI
47 | UART_MSR_CTS
| UART_MSR_DSR
);
48 regs
[UART_MCR
] = save_mcr
;
50 return (msr
== (UART_MSR_DCD
| UART_MSR_CTS
));
53 int ssb_extif_serial_init(struct ssb_extif
*extif
, struct ssb_serial_port
*ports
)
57 /* Disable GPIO interrupt initially */
58 extif_write32(extif
, SSB_EXTIF_GPIO_INTPOL
, 0);
59 extif_write32(extif
, SSB_EXTIF_GPIO_INTMASK
, 0);
61 for (i
= 0; i
< 2; i
++) {
62 void __iomem
*uart_regs
;
64 uart_regs
= ioremap_nocache(SSB_EUART
, 16);
68 if (serial_exists(uart_regs
) && ports
) {
69 extif_write32(extif
, SSB_EXTIF_GPIO_INTMASK
, 2);
72 ports
[i
].regs
= uart_regs
;
74 ports
[i
].baud_base
= 13500000;
75 ports
[i
].reg_shift
= 0;
82 #endif /* CONFIG_SSB_SERIAL */
84 void ssb_extif_timing_init(struct ssb_extif
*extif
, unsigned long ns
)
88 /* Initialize extif so we can get to the LEDs and external UART */
89 extif_write32(extif
, SSB_EXTIF_PROG_CFG
, SSB_EXTCFG_EN
);
91 /* Set timing for the flash */
92 tmp
= DIV_ROUND_UP(10, ns
) << SSB_PROG_WCNT_3_SHIFT
;
93 tmp
|= DIV_ROUND_UP(40, ns
) << SSB_PROG_WCNT_1_SHIFT
;
94 tmp
|= DIV_ROUND_UP(120, ns
);
95 extif_write32(extif
, SSB_EXTIF_PROG_WAITCNT
, tmp
);
97 /* Set programmable interface timing for external uart */
98 tmp
= DIV_ROUND_UP(10, ns
) << SSB_PROG_WCNT_3_SHIFT
;
99 tmp
|= DIV_ROUND_UP(20, ns
) << SSB_PROG_WCNT_2_SHIFT
;
100 tmp
|= DIV_ROUND_UP(100, ns
) << SSB_PROG_WCNT_1_SHIFT
;
101 tmp
|= DIV_ROUND_UP(120, ns
);
102 extif_write32(extif
, SSB_EXTIF_PROG_WAITCNT
, tmp
);
105 void ssb_extif_get_clockcontrol(struct ssb_extif
*extif
,
106 u32
*pll_type
, u32
*n
, u32
*m
)
108 *pll_type
= SSB_PLLTYPE_1
;
109 *n
= extif_read32(extif
, SSB_EXTIF_CLOCK_N
);
110 *m
= extif_read32(extif
, SSB_EXTIF_CLOCK_SB
);
113 u32
ssb_extif_gpio_in(struct ssb_extif
*extif
, u32 mask
)
115 return extif_read32(extif
, SSB_EXTIF_GPIO_IN
) & mask
;
118 void ssb_extif_gpio_out(struct ssb_extif
*extif
, u32 mask
, u32 value
)
120 return extif_write32_masked(extif
, SSB_EXTIF_GPIO_OUT(0),
124 void ssb_extif_gpio_outen(struct ssb_extif
*extif
, u32 mask
, u32 value
)
126 return extif_write32_masked(extif
, SSB_EXTIF_GPIO_OUTEN(0),
This page took 0.034199 seconds and 6 git commands to generate.