Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
[deliverable/linux.git] / drivers / staging / brcm80211 / brcmsmac / wl_mac80211.c
1 /*
2 * Copyright (c) 2010 Broadcom Corporation
3 *
4 * Permission to use, copy, modify, and/or distribute this software for any
5 * purpose with or without fee is hereby granted, provided that the above
6 * copyright notice and this permission notice appear in all copies.
7 *
8 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
9 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
10 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
11 * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
12 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
13 * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
14 * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
15 */
16
17 #define __UNDEF_NO_VERSION__
18
19 #include <linux/kernel.h>
20 #include <linux/etherdevice.h>
21 #include <linux/types.h>
22 #include <linux/pci_ids.h>
23 #include <linux/module.h>
24 #include <linux/pci.h>
25 #include <linux/sched.h>
26 #include <linux/firmware.h>
27 #include <net/mac80211.h>
28
29 #include <proto/802.11.h>
30 #include <bcmdefs.h>
31 #include <bcmwifi.h>
32 #include <bcmutils.h>
33 #include <bcmnvram.h>
34 #include <pcicfg.h>
35 #include <wlioctl.h>
36 #include <sbhnddma.h>
37
38 #include "phy/wlc_phy_int.h"
39 #include "d11.h"
40 #include "wlc_types.h"
41 #include "wlc_cfg.h"
42 #include "phy/phy_version.h"
43 #include "wlc_key.h"
44 #include "wlc_channel.h"
45 #include "wlc_scb.h"
46 #include "wlc_pub.h"
47 #include "wl_dbg.h"
48 #include "wl_export.h"
49 #include "wl_ucode.h"
50 #include "wl_mac80211.h"
51
52 #define N_TX_QUEUES 4 /* #tx queues on mac80211<->driver interface */
53
54 static void wl_timer(unsigned long data);
55 static void _wl_timer(struct wl_timer *t);
56
57
58 static int ieee_hw_init(struct ieee80211_hw *hw);
59 static int ieee_hw_rate_init(struct ieee80211_hw *hw);
60
61 static int wl_linux_watchdog(void *ctx);
62
63 /* Flags we support */
64 #define MAC_FILTERS (FIF_PROMISC_IN_BSS | \
65 FIF_ALLMULTI | \
66 FIF_FCSFAIL | \
67 FIF_PLCPFAIL | \
68 FIF_CONTROL | \
69 FIF_OTHER_BSS | \
70 FIF_BCN_PRBRESP_PROMISC)
71
72 static int wl_found;
73
74 #define WL_DEV_IF(dev) ((struct wl_if *)netdev_priv(dev))
75 #define WL_INFO(dev) ((struct wl_info *)(WL_DEV_IF(dev)->wl))
76 static int wl_request_fw(struct wl_info *wl, struct pci_dev *pdev);
77 static void wl_release_fw(struct wl_info *wl);
78
79 /* local prototypes */
80 static void wl_dpc(unsigned long data);
81 static irqreturn_t wl_isr(int irq, void *dev_id);
82
83 static int __devinit wl_pci_probe(struct pci_dev *pdev,
84 const struct pci_device_id *ent);
85 static void wl_remove(struct pci_dev *pdev);
86 static void wl_free(struct wl_info *wl);
87 static void wl_set_basic_rate(struct wl_rateset *rs, u16 rate, bool is_br);
88
89 MODULE_AUTHOR("Broadcom Corporation");
90 MODULE_DESCRIPTION("Broadcom 802.11n wireless LAN driver.");
91 MODULE_SUPPORTED_DEVICE("Broadcom 802.11n WLAN cards");
92 MODULE_LICENSE("Dual BSD/GPL");
93
94 /* recognized PCI IDs */
95 static struct pci_device_id wl_id_table[] = {
96 {PCI_VENDOR_ID_BROADCOM, 0x4357, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, /* 43225 2G */
97 {PCI_VENDOR_ID_BROADCOM, 0x4353, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, /* 43224 DUAL */
98 {PCI_VENDOR_ID_BROADCOM, 0x4727, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, /* 4313 DUAL */
99 {0}
100 };
101
102 MODULE_DEVICE_TABLE(pci, wl_id_table);
103
104 #ifdef BCMDBG
105 static int msglevel = 0xdeadbeef;
106 module_param(msglevel, int, 0);
107 static int phymsglevel = 0xdeadbeef;
108 module_param(phymsglevel, int, 0);
109 #endif /* BCMDBG */
110
111 #define HW_TO_WL(hw) (hw->priv)
112 #define WL_TO_HW(wl) (wl->pub->ieee_hw)
113
114 /* MAC80211 callback functions */
115 static int wl_ops_start(struct ieee80211_hw *hw);
116 static void wl_ops_stop(struct ieee80211_hw *hw);
117 static int wl_ops_add_interface(struct ieee80211_hw *hw,
118 struct ieee80211_vif *vif);
119 static void wl_ops_remove_interface(struct ieee80211_hw *hw,
120 struct ieee80211_vif *vif);
121 static int wl_ops_config(struct ieee80211_hw *hw, u32 changed);
122 static void wl_ops_bss_info_changed(struct ieee80211_hw *hw,
123 struct ieee80211_vif *vif,
124 struct ieee80211_bss_conf *info,
125 u32 changed);
126 static void wl_ops_configure_filter(struct ieee80211_hw *hw,
127 unsigned int changed_flags,
128 unsigned int *total_flags, u64 multicast);
129 static int wl_ops_set_tim(struct ieee80211_hw *hw, struct ieee80211_sta *sta,
130 bool set);
131 static void wl_ops_sw_scan_start(struct ieee80211_hw *hw);
132 static void wl_ops_sw_scan_complete(struct ieee80211_hw *hw);
133 static void wl_ops_set_tsf(struct ieee80211_hw *hw, u64 tsf);
134 static int wl_ops_get_stats(struct ieee80211_hw *hw,
135 struct ieee80211_low_level_stats *stats);
136 static void wl_ops_sta_notify(struct ieee80211_hw *hw,
137 struct ieee80211_vif *vif,
138 enum sta_notify_cmd cmd,
139 struct ieee80211_sta *sta);
140 static int wl_ops_conf_tx(struct ieee80211_hw *hw, u16 queue,
141 const struct ieee80211_tx_queue_params *params);
142 static u64 wl_ops_get_tsf(struct ieee80211_hw *hw);
143 static int wl_ops_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
144 struct ieee80211_sta *sta);
145 static int wl_ops_sta_remove(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
146 struct ieee80211_sta *sta);
147 static int wl_ops_ampdu_action(struct ieee80211_hw *hw,
148 struct ieee80211_vif *vif,
149 enum ieee80211_ampdu_mlme_action action,
150 struct ieee80211_sta *sta, u16 tid, u16 *ssn,
151 u8 buf_size);
152 static void wl_ops_rfkill_poll(struct ieee80211_hw *hw);
153 static void wl_ops_flush(struct ieee80211_hw *hw, bool drop);
154
155 static void wl_ops_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
156 {
157 struct wl_info *wl = hw->priv;
158
159 WL_LOCK(wl);
160 if (!wl->pub->up) {
161 wiphy_err(wl->wiphy, "ops->tx called while down\n");
162 kfree_skb(skb);
163 goto done;
164 }
165 wlc_sendpkt_mac80211(wl->wlc, skb, hw);
166 done:
167 WL_UNLOCK(wl);
168 }
169
170 static int wl_ops_start(struct ieee80211_hw *hw)
171 {
172 struct wl_info *wl = hw->priv;
173 bool blocked;
174 /*
175 struct ieee80211_channel *curchan = hw->conf.channel;
176 */
177
178 ieee80211_wake_queues(hw);
179 WL_LOCK(wl);
180 blocked = wl_rfkill_set_hw_state(wl);
181 WL_UNLOCK(wl);
182 if (!blocked)
183 wiphy_rfkill_stop_polling(wl->pub->ieee_hw->wiphy);
184
185 return 0;
186 }
187
188 static void wl_ops_stop(struct ieee80211_hw *hw)
189 {
190 ieee80211_stop_queues(hw);
191 }
192
193 static int
194 wl_ops_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
195 {
196 struct wl_info *wl;
197 int err;
198
199 /* Just STA for now */
200 if (vif->type != NL80211_IFTYPE_AP &&
201 vif->type != NL80211_IFTYPE_MESH_POINT &&
202 vif->type != NL80211_IFTYPE_STATION &&
203 vif->type != NL80211_IFTYPE_WDS &&
204 vif->type != NL80211_IFTYPE_ADHOC) {
205 wiphy_err(hw->wiphy, "%s: Attempt to add type %d, only"
206 " STA for now\n", __func__, vif->type);
207 return -EOPNOTSUPP;
208 }
209
210 wl = HW_TO_WL(hw);
211 WL_LOCK(wl);
212 err = wl_up(wl);
213 WL_UNLOCK(wl);
214
215 if (err != 0) {
216 wiphy_err(hw->wiphy, "%s: wl_up() returned %d\n", __func__,
217 err);
218 }
219 return err;
220 }
221
222 static void
223 wl_ops_remove_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
224 {
225 struct wl_info *wl;
226
227 wl = HW_TO_WL(hw);
228
229 /* put driver in down state */
230 WL_LOCK(wl);
231 wl_down(wl);
232 WL_UNLOCK(wl);
233 }
234
235 /*
236 * precondition: perimeter lock has been acquired
237 */
238 static int
239 ieee_set_channel(struct ieee80211_hw *hw, struct ieee80211_channel *chan,
240 enum nl80211_channel_type type)
241 {
242 struct wl_info *wl = HW_TO_WL(hw);
243 int err = 0;
244
245 switch (type) {
246 case NL80211_CHAN_HT20:
247 case NL80211_CHAN_NO_HT:
248 err = wlc_set(wl->wlc, WLC_SET_CHANNEL, chan->hw_value);
249 break;
250 case NL80211_CHAN_HT40MINUS:
251 case NL80211_CHAN_HT40PLUS:
252 wiphy_err(hw->wiphy,
253 "%s: Need to implement 40 Mhz Channels!\n", __func__);
254 err = 1;
255 break;
256 }
257
258 if (err)
259 return -EIO;
260 return err;
261 }
262
263 static int wl_ops_config(struct ieee80211_hw *hw, u32 changed)
264 {
265 struct ieee80211_conf *conf = &hw->conf;
266 struct wl_info *wl = HW_TO_WL(hw);
267 int err = 0;
268 int new_int;
269 struct wiphy *wiphy = hw->wiphy;
270
271 WL_LOCK(wl);
272 if (changed & IEEE80211_CONF_CHANGE_LISTEN_INTERVAL) {
273 if (wlc_iovar_setint
274 (wl->wlc, "bcn_li_bcn", conf->listen_interval)) {
275 wiphy_err(wiphy, "%s: Error setting listen_interval\n",
276 __func__);
277 err = -EIO;
278 goto config_out;
279 }
280 wlc_iovar_getint(wl->wlc, "bcn_li_bcn", &new_int);
281 }
282 if (changed & IEEE80211_CONF_CHANGE_MONITOR)
283 wiphy_err(wiphy, "%s: change monitor mode: %s (implement)\n",
284 __func__, conf->flags & IEEE80211_CONF_MONITOR ?
285 "true" : "false");
286 if (changed & IEEE80211_CONF_CHANGE_PS)
287 wiphy_err(wiphy, "%s: change power-save mode: %s (implement)\n",
288 __func__, conf->flags & IEEE80211_CONF_PS ?
289 "true" : "false");
290
291 if (changed & IEEE80211_CONF_CHANGE_POWER) {
292 if (wlc_iovar_setint
293 (wl->wlc, "qtxpower", conf->power_level * 4)) {
294 wiphy_err(wiphy, "%s: Error setting power_level\n",
295 __func__);
296 err = -EIO;
297 goto config_out;
298 }
299 wlc_iovar_getint(wl->wlc, "qtxpower", &new_int);
300 if (new_int != (conf->power_level * 4))
301 wiphy_err(wiphy, "%s: Power level req != actual, %d %d"
302 "\n", __func__, conf->power_level * 4,
303 new_int);
304 }
305 if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
306 err = ieee_set_channel(hw, conf->channel, conf->channel_type);
307 }
308 if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS) {
309 if (wlc_set
310 (wl->wlc, WLC_SET_SRL,
311 conf->short_frame_max_tx_count) < 0) {
312 wiphy_err(wiphy, "%s: Error setting srl\n", __func__);
313 err = -EIO;
314 goto config_out;
315 }
316 if (wlc_set(wl->wlc, WLC_SET_LRL, conf->long_frame_max_tx_count)
317 < 0) {
318 wiphy_err(wiphy, "%s: Error setting lrl\n", __func__);
319 err = -EIO;
320 goto config_out;
321 }
322 }
323
324 config_out:
325 WL_UNLOCK(wl);
326 return err;
327 }
328
329 static void
330 wl_ops_bss_info_changed(struct ieee80211_hw *hw,
331 struct ieee80211_vif *vif,
332 struct ieee80211_bss_conf *info, u32 changed)
333 {
334 struct wl_info *wl = HW_TO_WL(hw);
335 struct wiphy *wiphy = hw->wiphy;
336 int val;
337
338 if (changed & BSS_CHANGED_ASSOC) {
339 /* association status changed (associated/disassociated)
340 * also implies a change in the AID.
341 */
342 wiphy_err(wiphy, "%s: %s: %sassociated\n", KBUILD_MODNAME,
343 __func__, info->assoc ? "" : "dis");
344 WL_LOCK(wl);
345 wlc_associate_upd(wl->wlc, info->assoc);
346 WL_UNLOCK(wl);
347 }
348 if (changed & BSS_CHANGED_ERP_SLOT) {
349 /* slot timing changed */
350 if (info->use_short_slot)
351 val = 1;
352 else
353 val = 0;
354 WL_LOCK(wl);
355 wlc_set(wl->wlc, WLC_SET_SHORTSLOT_OVERRIDE, val);
356 WL_UNLOCK(wl);
357 }
358
359 if (changed & BSS_CHANGED_HT) {
360 /* 802.11n parameters changed */
361 u16 mode = info->ht_operation_mode;
362
363 WL_LOCK(wl);
364 wlc_protection_upd(wl->wlc, WLC_PROT_N_CFG,
365 mode & IEEE80211_HT_OP_MODE_PROTECTION);
366 wlc_protection_upd(wl->wlc, WLC_PROT_N_NONGF,
367 mode & IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT);
368 wlc_protection_upd(wl->wlc, WLC_PROT_N_OBSS,
369 mode & IEEE80211_HT_OP_MODE_NON_HT_STA_PRSNT);
370 WL_UNLOCK(wl);
371 }
372 if (changed & BSS_CHANGED_BASIC_RATES) {
373 struct ieee80211_supported_band *bi;
374 u32 br_mask, i;
375 u16 rate;
376 struct wl_rateset rs;
377 int error;
378
379 /* retrieve the current rates */
380 WL_LOCK(wl);
381 error = wlc_ioctl(wl->wlc, WLC_GET_CURR_RATESET,
382 &rs, sizeof(rs), NULL);
383 WL_UNLOCK(wl);
384 if (error) {
385 wiphy_err(wiphy, "%s: retrieve rateset failed: %d\n",
386 __func__, error);
387 return;
388 }
389 br_mask = info->basic_rates;
390 bi = hw->wiphy->bands[wlc_get_curband(wl->wlc)];
391 for (i = 0; i < bi->n_bitrates; i++) {
392 /* convert to internal rate value */
393 rate = (bi->bitrates[i].bitrate << 1) / 10;
394
395 /* set/clear basic rate flag */
396 wl_set_basic_rate(&rs, rate, br_mask & 1);
397 br_mask >>= 1;
398 }
399
400 /* update the rate set */
401 WL_LOCK(wl);
402 wlc_ioctl(wl->wlc, WLC_SET_RATESET, &rs, sizeof(rs), NULL);
403 WL_UNLOCK(wl);
404 }
405 if (changed & BSS_CHANGED_BEACON_INT) {
406 /* Beacon interval changed */
407 WL_LOCK(wl);
408 wlc_set(wl->wlc, WLC_SET_BCNPRD, info->beacon_int);
409 WL_UNLOCK(wl);
410 }
411 if (changed & BSS_CHANGED_BSSID) {
412 /* BSSID changed, for whatever reason (IBSS and managed mode) */
413 WL_LOCK(wl);
414 wlc_set_addrmatch(wl->wlc, RCM_BSSID_OFFSET,
415 info->bssid);
416 WL_UNLOCK(wl);
417 }
418 if (changed & BSS_CHANGED_BEACON) {
419 /* Beacon data changed, retrieve new beacon (beaconing modes) */
420 wiphy_err(wiphy, "%s: beacon changed\n", __func__);
421 }
422 if (changed & BSS_CHANGED_BEACON_ENABLED) {
423 /* Beaconing should be enabled/disabled (beaconing modes) */
424 wiphy_err(wiphy, "%s: Beacon enabled: %s\n", __func__,
425 info->enable_beacon ? "true" : "false");
426 }
427 if (changed & BSS_CHANGED_CQM) {
428 /* Connection quality monitor config changed */
429 wiphy_err(wiphy, "%s: cqm change: threshold %d, hys %d "
430 " (implement)\n", __func__, info->cqm_rssi_thold,
431 info->cqm_rssi_hyst);
432 }
433 if (changed & BSS_CHANGED_IBSS) {
434 /* IBSS join status changed */
435 wiphy_err(wiphy, "%s: IBSS joined: %s (implement)\n", __func__,
436 info->ibss_joined ? "true" : "false");
437 }
438 if (changed & BSS_CHANGED_ARP_FILTER) {
439 /* Hardware ARP filter address list or state changed */
440 wiphy_err(wiphy, "%s: arp filtering: enabled %s, count %d"
441 " (implement)\n", __func__, info->arp_filter_enabled ?
442 "true" : "false", info->arp_addr_cnt);
443 }
444 if (changed & BSS_CHANGED_QOS) {
445 /*
446 * QoS for this association was enabled/disabled.
447 * Note that it is only ever disabled for station mode.
448 */
449 wiphy_err(wiphy, "%s: qos enabled: %s (implement)\n", __func__,
450 info->qos ? "true" : "false");
451 }
452 if (changed & BSS_CHANGED_IDLE) {
453 /* Idle changed for this BSS/interface */
454 wiphy_err(wiphy, "%s: BSS idle: %s (implement)\n", __func__,
455 info->idle ? "true" : "false");
456 }
457 return;
458 }
459
460 static void
461 wl_ops_configure_filter(struct ieee80211_hw *hw,
462 unsigned int changed_flags,
463 unsigned int *total_flags, u64 multicast)
464 {
465 struct wl_info *wl = hw->priv;
466 struct wiphy *wiphy = hw->wiphy;
467
468 changed_flags &= MAC_FILTERS;
469 *total_flags &= MAC_FILTERS;
470 if (changed_flags & FIF_PROMISC_IN_BSS)
471 wiphy_err(wiphy, "FIF_PROMISC_IN_BSS\n");
472 if (changed_flags & FIF_ALLMULTI)
473 wiphy_err(wiphy, "FIF_ALLMULTI\n");
474 if (changed_flags & FIF_FCSFAIL)
475 wiphy_err(wiphy, "FIF_FCSFAIL\n");
476 if (changed_flags & FIF_PLCPFAIL)
477 wiphy_err(wiphy, "FIF_PLCPFAIL\n");
478 if (changed_flags & FIF_CONTROL)
479 wiphy_err(wiphy, "FIF_CONTROL\n");
480 if (changed_flags & FIF_OTHER_BSS)
481 wiphy_err(wiphy, "FIF_OTHER_BSS\n");
482 if (changed_flags & FIF_BCN_PRBRESP_PROMISC) {
483 WL_LOCK(wl);
484 if (*total_flags & FIF_BCN_PRBRESP_PROMISC) {
485 wl->pub->mac80211_state |= MAC80211_PROMISC_BCNS;
486 wlc_mac_bcn_promisc_change(wl->wlc, 1);
487 } else {
488 wlc_mac_bcn_promisc_change(wl->wlc, 0);
489 wl->pub->mac80211_state &= ~MAC80211_PROMISC_BCNS;
490 }
491 WL_UNLOCK(wl);
492 }
493 return;
494 }
495
496 static int
497 wl_ops_set_tim(struct ieee80211_hw *hw, struct ieee80211_sta *sta, bool set)
498 {
499 return 0;
500 }
501
502 static void wl_ops_sw_scan_start(struct ieee80211_hw *hw)
503 {
504 struct wl_info *wl = hw->priv;
505 WL_LOCK(wl);
506 wlc_scan_start(wl->wlc);
507 WL_UNLOCK(wl);
508 return;
509 }
510
511 static void wl_ops_sw_scan_complete(struct ieee80211_hw *hw)
512 {
513 struct wl_info *wl = hw->priv;
514 WL_LOCK(wl);
515 wlc_scan_stop(wl->wlc);
516 WL_UNLOCK(wl);
517 return;
518 }
519
520 static void wl_ops_set_tsf(struct ieee80211_hw *hw, u64 tsf)
521 {
522 wiphy_err(hw->wiphy, "%s: Enter\n", __func__);
523 return;
524 }
525
526 static int
527 wl_ops_get_stats(struct ieee80211_hw *hw,
528 struct ieee80211_low_level_stats *stats)
529 {
530 struct wl_info *wl = hw->priv;
531 struct wl_cnt *cnt;
532
533 WL_LOCK(wl);
534 cnt = wl->pub->_cnt;
535 stats->dot11ACKFailureCount = 0;
536 stats->dot11RTSFailureCount = 0;
537 stats->dot11FCSErrorCount = 0;
538 stats->dot11RTSSuccessCount = 0;
539 WL_UNLOCK(wl);
540 return 0;
541 }
542
543 static void
544 wl_ops_sta_notify(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
545 enum sta_notify_cmd cmd, struct ieee80211_sta *sta)
546 {
547 switch (cmd) {
548 default:
549 wiphy_err(hw->wiphy, "%s: Unknown cmd = %d\n", __func__,
550 cmd);
551 break;
552 }
553 return;
554 }
555
556 static int
557 wl_ops_conf_tx(struct ieee80211_hw *hw, u16 queue,
558 const struct ieee80211_tx_queue_params *params)
559 {
560 struct wl_info *wl = hw->priv;
561
562 WL_LOCK(wl);
563 wlc_wme_setparams(wl->wlc, queue, params, true);
564 WL_UNLOCK(wl);
565
566 return 0;
567 }
568
569 static u64 wl_ops_get_tsf(struct ieee80211_hw *hw)
570 {
571 wiphy_err(hw->wiphy, "%s: Enter\n", __func__);
572 return 0;
573 }
574
575 static int
576 wl_ops_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
577 struct ieee80211_sta *sta)
578 {
579 struct scb *scb;
580
581 int i;
582 struct wl_info *wl = hw->priv;
583
584 /* Init the scb */
585 scb = (struct scb *)sta->drv_priv;
586 memset(scb, 0, sizeof(struct scb));
587 for (i = 0; i < NUMPRIO; i++)
588 scb->seqctl[i] = 0xFFFF;
589 scb->seqctl_nonqos = 0xFFFF;
590 scb->magic = SCB_MAGIC;
591
592 wl->pub->global_scb = scb;
593 wl->pub->global_ampdu = &(scb->scb_ampdu);
594 wl->pub->global_ampdu->scb = scb;
595 wl->pub->global_ampdu->max_pdu = 16;
596 bcm_pktq_init(&scb->scb_ampdu.txq, AMPDU_MAX_SCB_TID,
597 AMPDU_MAX_SCB_TID * PKTQ_LEN_DEFAULT);
598
599 sta->ht_cap.ht_supported = true;
600 sta->ht_cap.ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K;
601 sta->ht_cap.ampdu_density = AMPDU_DEF_MPDU_DENSITY;
602 sta->ht_cap.cap = IEEE80211_HT_CAP_GRN_FLD |
603 IEEE80211_HT_CAP_SGI_20 |
604 IEEE80211_HT_CAP_SGI_40 | IEEE80211_HT_CAP_40MHZ_INTOLERANT;
605
606 /* minstrel_ht initiates addBA on our behalf by calling ieee80211_start_tx_ba_session() */
607 return 0;
608 }
609
610 static int
611 wl_ops_sta_remove(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
612 struct ieee80211_sta *sta)
613 {
614 return 0;
615 }
616
617 static int
618 wl_ops_ampdu_action(struct ieee80211_hw *hw,
619 struct ieee80211_vif *vif,
620 enum ieee80211_ampdu_mlme_action action,
621 struct ieee80211_sta *sta, u16 tid, u16 *ssn,
622 u8 buf_size)
623 {
624 struct scb *scb = (struct scb *)sta->drv_priv;
625 struct wl_info *wl = hw->priv;
626 int status;
627
628 if (WARN_ON(scb->magic != SCB_MAGIC))
629 return -EIDRM;
630 switch (action) {
631 case IEEE80211_AMPDU_RX_START:
632 break;
633 case IEEE80211_AMPDU_RX_STOP:
634 break;
635 case IEEE80211_AMPDU_TX_START:
636 WL_LOCK(wl);
637 status = wlc_aggregatable(wl->wlc, tid);
638 WL_UNLOCK(wl);
639 if (!status) {
640 wiphy_err(wl->wiphy, "START: tid %d is not agg\'able\n",
641 tid);
642 return -EINVAL;
643 }
644 /* XXX: Use the starting sequence number provided ... */
645 *ssn = 0;
646 ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid);
647 break;
648
649 case IEEE80211_AMPDU_TX_STOP:
650 WL_LOCK(wl);
651 wlc_ampdu_flush(wl->wlc, sta, tid);
652 WL_UNLOCK(wl);
653 ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);
654 break;
655 case IEEE80211_AMPDU_TX_OPERATIONAL:
656 /* Not sure what to do here */
657 /* Power save wakeup */
658 break;
659 default:
660 wiphy_err(wl->wiphy, "%s: Invalid command, ignoring\n",
661 __func__);
662 }
663
664 return 0;
665 }
666
667 static void wl_ops_rfkill_poll(struct ieee80211_hw *hw)
668 {
669 struct wl_info *wl = HW_TO_WL(hw);
670 bool blocked;
671
672 WL_LOCK(wl);
673 blocked = wlc_check_radio_disabled(wl->wlc);
674 WL_UNLOCK(wl);
675
676 wiphy_rfkill_set_hw_state(wl->pub->ieee_hw->wiphy, blocked);
677 }
678
679 static void wl_ops_flush(struct ieee80211_hw *hw, bool drop)
680 {
681 struct wl_info *wl = HW_TO_WL(hw);
682
683 no_printk("%s: drop = %s\n", __func__, drop ? "true" : "false");
684
685 /* wait for packet queue and dma fifos to run empty */
686 WL_LOCK(wl);
687 wlc_wait_for_tx_completion(wl->wlc, drop);
688 WL_UNLOCK(wl);
689 }
690
691 static const struct ieee80211_ops wl_ops = {
692 .tx = wl_ops_tx,
693 .start = wl_ops_start,
694 .stop = wl_ops_stop,
695 .add_interface = wl_ops_add_interface,
696 .remove_interface = wl_ops_remove_interface,
697 .config = wl_ops_config,
698 .bss_info_changed = wl_ops_bss_info_changed,
699 .configure_filter = wl_ops_configure_filter,
700 .set_tim = wl_ops_set_tim,
701 .sw_scan_start = wl_ops_sw_scan_start,
702 .sw_scan_complete = wl_ops_sw_scan_complete,
703 .set_tsf = wl_ops_set_tsf,
704 .get_stats = wl_ops_get_stats,
705 .sta_notify = wl_ops_sta_notify,
706 .conf_tx = wl_ops_conf_tx,
707 .get_tsf = wl_ops_get_tsf,
708 .sta_add = wl_ops_sta_add,
709 .sta_remove = wl_ops_sta_remove,
710 .ampdu_action = wl_ops_ampdu_action,
711 .rfkill_poll = wl_ops_rfkill_poll,
712 .flush = wl_ops_flush,
713 };
714
715 /*
716 * is called in wl_pci_probe() context, therefore no locking required.
717 */
718 static int wl_set_hint(struct wl_info *wl, char *abbrev)
719 {
720 return regulatory_hint(wl->pub->ieee_hw->wiphy, abbrev);
721 }
722
723 /**
724 * attach to the WL device.
725 *
726 * Attach to the WL device identified by vendor and device parameters.
727 * regs is a host accessible memory address pointing to WL device registers.
728 *
729 * wl_attach is not defined as static because in the case where no bus
730 * is defined, wl_attach will never be called, and thus, gcc will issue
731 * a warning that this function is defined but not used if we declare
732 * it as static.
733 *
734 *
735 * is called in wl_pci_probe() context, therefore no locking required.
736 */
737 static struct wl_info *wl_attach(u16 vendor, u16 device, unsigned long regs,
738 uint bustype, void *btparam, uint irq)
739 {
740 struct wl_info *wl = NULL;
741 int unit, err;
742
743 unsigned long base_addr;
744 struct ieee80211_hw *hw;
745 u8 perm[ETH_ALEN];
746
747 unit = wl_found;
748 err = 0;
749
750 if (unit < 0) {
751 return NULL;
752 }
753
754 /* allocate private info */
755 hw = pci_get_drvdata(btparam); /* btparam == pdev */
756 if (hw != NULL)
757 wl = hw->priv;
758 if (WARN_ON(hw == NULL) || WARN_ON(wl == NULL))
759 return NULL;
760 wl->wiphy = hw->wiphy;
761
762 atomic_set(&wl->callbacks, 0);
763
764 /* setup the bottom half handler */
765 tasklet_init(&wl->tasklet, wl_dpc, (unsigned long) wl);
766
767
768
769 base_addr = regs;
770
771 if (bustype == PCI_BUS) {
772 wl->piomode = false;
773 } else if (bustype == RPC_BUS) {
774 /* Do nothing */
775 } else {
776 bustype = PCI_BUS;
777 BCMMSG(wl->wiphy, "force to PCI\n");
778 }
779 wl->bcm_bustype = bustype;
780
781 wl->regsva = ioremap_nocache(base_addr, PCI_BAR0_WINSZ);
782 if (wl->regsva == NULL) {
783 wiphy_err(wl->wiphy, "wl%d: ioremap() failed\n", unit);
784 goto fail;
785 }
786 spin_lock_init(&wl->lock);
787 spin_lock_init(&wl->isr_lock);
788
789 /* prepare ucode */
790 if (wl_request_fw(wl, (struct pci_dev *)btparam) < 0) {
791 wiphy_err(wl->wiphy, "%s: Failed to find firmware usually in "
792 "%s\n", KBUILD_MODNAME, "/lib/firmware/brcm");
793 wl_release_fw(wl);
794 wl_remove((struct pci_dev *)btparam);
795 return NULL;
796 }
797
798 /* common load-time initialization */
799 wl->wlc = wlc_attach((void *)wl, vendor, device, unit, wl->piomode,
800 wl->regsva, wl->bcm_bustype, btparam, &err);
801 wl_release_fw(wl);
802 if (!wl->wlc) {
803 wiphy_err(wl->wiphy, "%s: wlc_attach() failed with code %d\n",
804 KBUILD_MODNAME, err);
805 goto fail;
806 }
807 wl->pub = wlc_pub(wl->wlc);
808
809 wl->pub->ieee_hw = hw;
810
811 if (wlc_iovar_setint(wl->wlc, "mpc", 0)) {
812 wiphy_err(wl->wiphy, "wl%d: Error setting MPC variable to 0\n",
813 unit);
814 }
815
816 /* register our interrupt handler */
817 if (request_irq(irq, wl_isr, IRQF_SHARED, KBUILD_MODNAME, wl)) {
818 wiphy_err(wl->wiphy, "wl%d: request_irq() failed\n", unit);
819 goto fail;
820 }
821 wl->irq = irq;
822
823 /* register module */
824 wlc_module_register(wl->pub, NULL, "linux", wl, NULL, wl_linux_watchdog,
825 NULL);
826
827 if (ieee_hw_init(hw)) {
828 wiphy_err(wl->wiphy, "wl%d: %s: ieee_hw_init failed!\n", unit,
829 __func__);
830 goto fail;
831 }
832
833 memcpy(perm, &wl->pub->cur_etheraddr, ETH_ALEN);
834 if (WARN_ON(!is_valid_ether_addr(perm)))
835 goto fail;
836 SET_IEEE80211_PERM_ADDR(hw, perm);
837
838 err = ieee80211_register_hw(hw);
839 if (err) {
840 wiphy_err(wl->wiphy, "%s: ieee80211_register_hw failed, status"
841 "%d\n", __func__, err);
842 }
843
844 if (wl->pub->srom_ccode[0])
845 err = wl_set_hint(wl, wl->pub->srom_ccode);
846 else
847 err = wl_set_hint(wl, "US");
848 if (err) {
849 wiphy_err(wl->wiphy, "%s: regulatory_hint failed, status %d\n",
850 __func__, err);
851 }
852
853 wl_found++;
854 return wl;
855
856 fail:
857 wl_free(wl);
858 return NULL;
859 }
860
861
862
863 #define CHAN2GHZ(channel, freqency, chflags) { \
864 .band = IEEE80211_BAND_2GHZ, \
865 .center_freq = (freqency), \
866 .hw_value = (channel), \
867 .flags = chflags, \
868 .max_antenna_gain = 0, \
869 .max_power = 19, \
870 }
871
872 static struct ieee80211_channel wl_2ghz_chantable[] = {
873 CHAN2GHZ(1, 2412, IEEE80211_CHAN_NO_HT40MINUS),
874 CHAN2GHZ(2, 2417, IEEE80211_CHAN_NO_HT40MINUS),
875 CHAN2GHZ(3, 2422, IEEE80211_CHAN_NO_HT40MINUS),
876 CHAN2GHZ(4, 2427, IEEE80211_CHAN_NO_HT40MINUS),
877 CHAN2GHZ(5, 2432, 0),
878 CHAN2GHZ(6, 2437, 0),
879 CHAN2GHZ(7, 2442, 0),
880 CHAN2GHZ(8, 2447, IEEE80211_CHAN_NO_HT40PLUS),
881 CHAN2GHZ(9, 2452, IEEE80211_CHAN_NO_HT40PLUS),
882 CHAN2GHZ(10, 2457, IEEE80211_CHAN_NO_HT40PLUS),
883 CHAN2GHZ(11, 2462, IEEE80211_CHAN_NO_HT40PLUS),
884 CHAN2GHZ(12, 2467,
885 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_IBSS |
886 IEEE80211_CHAN_NO_HT40PLUS),
887 CHAN2GHZ(13, 2472,
888 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_IBSS |
889 IEEE80211_CHAN_NO_HT40PLUS),
890 CHAN2GHZ(14, 2484,
891 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_IBSS |
892 IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS)
893 };
894
895 #define CHAN5GHZ(channel, chflags) { \
896 .band = IEEE80211_BAND_5GHZ, \
897 .center_freq = 5000 + 5*(channel), \
898 .hw_value = (channel), \
899 .flags = chflags, \
900 .max_antenna_gain = 0, \
901 .max_power = 21, \
902 }
903
904 static struct ieee80211_channel wl_5ghz_nphy_chantable[] = {
905 /* UNII-1 */
906 CHAN5GHZ(36, IEEE80211_CHAN_NO_HT40MINUS),
907 CHAN5GHZ(40, IEEE80211_CHAN_NO_HT40PLUS),
908 CHAN5GHZ(44, IEEE80211_CHAN_NO_HT40MINUS),
909 CHAN5GHZ(48, IEEE80211_CHAN_NO_HT40PLUS),
910 /* UNII-2 */
911 CHAN5GHZ(52,
912 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
913 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
914 CHAN5GHZ(56,
915 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
916 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
917 CHAN5GHZ(60,
918 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
919 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
920 CHAN5GHZ(64,
921 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
922 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
923 /* MID */
924 CHAN5GHZ(100,
925 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
926 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
927 CHAN5GHZ(104,
928 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
929 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
930 CHAN5GHZ(108,
931 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
932 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
933 CHAN5GHZ(112,
934 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
935 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
936 CHAN5GHZ(116,
937 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
938 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
939 CHAN5GHZ(120,
940 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
941 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
942 CHAN5GHZ(124,
943 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
944 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
945 CHAN5GHZ(128,
946 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
947 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
948 CHAN5GHZ(132,
949 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
950 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
951 CHAN5GHZ(136,
952 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
953 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
954 CHAN5GHZ(140,
955 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
956 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS |
957 IEEE80211_CHAN_NO_HT40MINUS),
958 /* UNII-3 */
959 CHAN5GHZ(149, IEEE80211_CHAN_NO_HT40MINUS),
960 CHAN5GHZ(153, IEEE80211_CHAN_NO_HT40PLUS),
961 CHAN5GHZ(157, IEEE80211_CHAN_NO_HT40MINUS),
962 CHAN5GHZ(161, IEEE80211_CHAN_NO_HT40PLUS),
963 CHAN5GHZ(165, IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS)
964 };
965
966 #define RATE(rate100m, _flags) { \
967 .bitrate = (rate100m), \
968 .flags = (_flags), \
969 .hw_value = (rate100m / 5), \
970 }
971
972 static struct ieee80211_rate wl_legacy_ratetable[] = {
973 RATE(10, 0),
974 RATE(20, IEEE80211_RATE_SHORT_PREAMBLE),
975 RATE(55, IEEE80211_RATE_SHORT_PREAMBLE),
976 RATE(110, IEEE80211_RATE_SHORT_PREAMBLE),
977 RATE(60, 0),
978 RATE(90, 0),
979 RATE(120, 0),
980 RATE(180, 0),
981 RATE(240, 0),
982 RATE(360, 0),
983 RATE(480, 0),
984 RATE(540, 0),
985 };
986
987 static struct ieee80211_supported_band wl_band_2GHz_nphy = {
988 .band = IEEE80211_BAND_2GHZ,
989 .channels = wl_2ghz_chantable,
990 .n_channels = ARRAY_SIZE(wl_2ghz_chantable),
991 .bitrates = wl_legacy_ratetable,
992 .n_bitrates = ARRAY_SIZE(wl_legacy_ratetable),
993 .ht_cap = {
994 /* from include/linux/ieee80211.h */
995 .cap = IEEE80211_HT_CAP_GRN_FLD |
996 IEEE80211_HT_CAP_SGI_20 |
997 IEEE80211_HT_CAP_SGI_40 | IEEE80211_HT_CAP_40MHZ_INTOLERANT,
998 .ht_supported = true,
999 .ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K,
1000 .ampdu_density = AMPDU_DEF_MPDU_DENSITY,
1001 .mcs = {
1002 /* placeholders for now */
1003 .rx_mask = {0xff, 0xff, 0, 0, 0, 0, 0, 0, 0, 0},
1004 .rx_highest = 500,
1005 .tx_params = IEEE80211_HT_MCS_TX_DEFINED}
1006 }
1007 };
1008
1009 static struct ieee80211_supported_band wl_band_5GHz_nphy = {
1010 .band = IEEE80211_BAND_5GHZ,
1011 .channels = wl_5ghz_nphy_chantable,
1012 .n_channels = ARRAY_SIZE(wl_5ghz_nphy_chantable),
1013 .bitrates = wl_legacy_ratetable + 4,
1014 .n_bitrates = ARRAY_SIZE(wl_legacy_ratetable) - 4,
1015 .ht_cap = {
1016 /* use IEEE80211_HT_CAP_* from include/linux/ieee80211.h */
1017 .cap = IEEE80211_HT_CAP_GRN_FLD | IEEE80211_HT_CAP_SGI_20 | IEEE80211_HT_CAP_SGI_40 | IEEE80211_HT_CAP_40MHZ_INTOLERANT, /* No 40 mhz yet */
1018 .ht_supported = true,
1019 .ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K,
1020 .ampdu_density = AMPDU_DEF_MPDU_DENSITY,
1021 .mcs = {
1022 /* placeholders for now */
1023 .rx_mask = {0xff, 0xff, 0, 0, 0, 0, 0, 0, 0, 0},
1024 .rx_highest = 500,
1025 .tx_params = IEEE80211_HT_MCS_TX_DEFINED}
1026 }
1027 };
1028
1029 /*
1030 * is called in wl_pci_probe() context, therefore no locking required.
1031 */
1032 static int ieee_hw_rate_init(struct ieee80211_hw *hw)
1033 {
1034 struct wl_info *wl = HW_TO_WL(hw);
1035 int has_5g;
1036 char phy_list[4];
1037
1038 has_5g = 0;
1039
1040 hw->wiphy->bands[IEEE80211_BAND_2GHZ] = NULL;
1041 hw->wiphy->bands[IEEE80211_BAND_5GHZ] = NULL;
1042
1043 if (wlc_get(wl->wlc, WLC_GET_PHYLIST, (int *)&phy_list) < 0) {
1044 wiphy_err(hw->wiphy, "Phy list failed\n");
1045 }
1046
1047 if (phy_list[0] == 'n' || phy_list[0] == 'c') {
1048 if (phy_list[0] == 'c') {
1049 /* Single stream */
1050 wl_band_2GHz_nphy.ht_cap.mcs.rx_mask[1] = 0;
1051 wl_band_2GHz_nphy.ht_cap.mcs.rx_highest = 72;
1052 }
1053 hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &wl_band_2GHz_nphy;
1054 } else {
1055 return -EPERM;
1056 }
1057
1058 /* Assume all bands use the same phy. True for 11n devices. */
1059 if (NBANDS_PUB(wl->pub) > 1) {
1060 has_5g++;
1061 if (phy_list[0] == 'n' || phy_list[0] == 'c') {
1062 hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
1063 &wl_band_5GHz_nphy;
1064 } else {
1065 return -EPERM;
1066 }
1067 }
1068 return 0;
1069 }
1070
1071 /*
1072 * is called in wl_pci_probe() context, therefore no locking required.
1073 */
1074 static int ieee_hw_init(struct ieee80211_hw *hw)
1075 {
1076 hw->flags = IEEE80211_HW_SIGNAL_DBM
1077 /* | IEEE80211_HW_CONNECTION_MONITOR What is this? */
1078 | IEEE80211_HW_REPORTS_TX_ACK_STATUS
1079 | IEEE80211_HW_AMPDU_AGGREGATION;
1080
1081 hw->extra_tx_headroom = wlc_get_header_len();
1082 hw->queues = N_TX_QUEUES;
1083 /* FIXME: this doesn't seem to be used properly in minstrel_ht.
1084 * mac80211/status.c:ieee80211_tx_status() checks this value,
1085 * but mac80211/rc80211_minstrel_ht.c:minstrel_ht_get_rate()
1086 * appears to always set 3 rates
1087 */
1088 hw->max_rates = 2; /* Primary rate and 1 fallback rate */
1089
1090 hw->channel_change_time = 7 * 1000; /* channel change time is dependent on chip and band */
1091 hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
1092
1093 hw->rate_control_algorithm = "minstrel_ht";
1094
1095 hw->sta_data_size = sizeof(struct scb);
1096 return ieee_hw_rate_init(hw);
1097 }
1098
1099 /**
1100 * determines if a device is a WL device, and if so, attaches it.
1101 *
1102 * This function determines if a device pointed to by pdev is a WL device,
1103 * and if so, performs a wl_attach() on it.
1104 *
1105 * Perimeter lock is initialized in the course of this function.
1106 */
1107 static int __devinit
1108 wl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
1109 {
1110 int rc;
1111 struct wl_info *wl;
1112 struct ieee80211_hw *hw;
1113 u32 val;
1114
1115 dev_info(&pdev->dev, "bus %d slot %d func %d irq %d\n",
1116 pdev->bus->number, PCI_SLOT(pdev->devfn),
1117 PCI_FUNC(pdev->devfn), pdev->irq);
1118
1119 if ((pdev->vendor != PCI_VENDOR_ID_BROADCOM) ||
1120 (((pdev->device & 0xff00) != 0x4300) &&
1121 ((pdev->device & 0xff00) != 0x4700) &&
1122 ((pdev->device < 43000) || (pdev->device > 43999))))
1123 return -ENODEV;
1124
1125 rc = pci_enable_device(pdev);
1126 if (rc) {
1127 pr_err("%s: Cannot enable device %d-%d_%d\n",
1128 __func__, pdev->bus->number, PCI_SLOT(pdev->devfn),
1129 PCI_FUNC(pdev->devfn));
1130 return -ENODEV;
1131 }
1132 pci_set_master(pdev);
1133
1134 pci_read_config_dword(pdev, 0x40, &val);
1135 if ((val & 0x0000ff00) != 0)
1136 pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
1137
1138 hw = ieee80211_alloc_hw(sizeof(struct wl_info), &wl_ops);
1139 if (!hw) {
1140 pr_err("%s: ieee80211_alloc_hw failed\n", __func__);
1141 return -ENOMEM;
1142 }
1143
1144 SET_IEEE80211_DEV(hw, &pdev->dev);
1145
1146 pci_set_drvdata(pdev, hw);
1147
1148 memset(hw->priv, 0, sizeof(*wl));
1149
1150 wl = wl_attach(pdev->vendor, pdev->device, pci_resource_start(pdev, 0),
1151 PCI_BUS, pdev, pdev->irq);
1152
1153 if (!wl) {
1154 pr_err("%s: %s: wl_attach failed!\n", KBUILD_MODNAME,
1155 __func__);
1156 return -ENODEV;
1157 }
1158 return 0;
1159 }
1160
1161 static int wl_suspend(struct pci_dev *pdev, pm_message_t state)
1162 {
1163 struct wl_info *wl;
1164 struct ieee80211_hw *hw;
1165
1166 hw = pci_get_drvdata(pdev);
1167 wl = HW_TO_WL(hw);
1168 if (!wl) {
1169 wiphy_err(wl->wiphy,
1170 "wl_suspend: pci_get_drvdata failed\n");
1171 return -ENODEV;
1172 }
1173
1174 /* only need to flag hw is down for proper resume */
1175 WL_LOCK(wl);
1176 wl->pub->hw_up = false;
1177 WL_UNLOCK(wl);
1178
1179 pci_save_state(pdev);
1180 pci_disable_device(pdev);
1181 return pci_set_power_state(pdev, PCI_D3hot);
1182 }
1183
1184 static int wl_resume(struct pci_dev *pdev)
1185 {
1186 struct wl_info *wl;
1187 struct ieee80211_hw *hw;
1188 int err = 0;
1189 u32 val;
1190
1191 hw = pci_get_drvdata(pdev);
1192 wl = HW_TO_WL(hw);
1193 if (!wl) {
1194 wiphy_err(wl->wiphy,
1195 "wl: wl_resume: pci_get_drvdata failed\n");
1196 return -ENODEV;
1197 }
1198
1199 err = pci_set_power_state(pdev, PCI_D0);
1200 if (err)
1201 return err;
1202
1203 pci_restore_state(pdev);
1204
1205 err = pci_enable_device(pdev);
1206 if (err)
1207 return err;
1208
1209 pci_set_master(pdev);
1210
1211 pci_read_config_dword(pdev, 0x40, &val);
1212 if ((val & 0x0000ff00) != 0)
1213 pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
1214
1215 /*
1216 * done. driver will be put in up state
1217 * in wl_ops_add_interface() call.
1218 */
1219 return err;
1220 }
1221
1222 /*
1223 * called from both kernel as from wl_*()
1224 * precondition: perimeter lock is not acquired.
1225 */
1226 static void wl_remove(struct pci_dev *pdev)
1227 {
1228 struct wl_info *wl;
1229 struct ieee80211_hw *hw;
1230 int status;
1231
1232 hw = pci_get_drvdata(pdev);
1233 wl = HW_TO_WL(hw);
1234 if (!wl) {
1235 pr_err("wl: wl_remove: pci_get_drvdata failed\n");
1236 return;
1237 }
1238
1239 WL_LOCK(wl);
1240 status = wlc_chipmatch(pdev->vendor, pdev->device);
1241 WL_UNLOCK(wl);
1242 if (!status) {
1243 wiphy_err(wl->wiphy, "wl: wl_remove: wlc_chipmatch failed\n");
1244 return;
1245 }
1246 if (wl->wlc) {
1247 wiphy_rfkill_set_hw_state(wl->pub->ieee_hw->wiphy, false);
1248 wiphy_rfkill_stop_polling(wl->pub->ieee_hw->wiphy);
1249 ieee80211_unregister_hw(hw);
1250 WL_LOCK(wl);
1251 wl_down(wl);
1252 WL_UNLOCK(wl);
1253 }
1254 pci_disable_device(pdev);
1255
1256 wl_free(wl);
1257
1258 pci_set_drvdata(pdev, NULL);
1259 ieee80211_free_hw(hw);
1260 }
1261
1262 static struct pci_driver wl_pci_driver = {
1263 .name = KBUILD_MODNAME,
1264 .probe = wl_pci_probe,
1265 .suspend = wl_suspend,
1266 .resume = wl_resume,
1267 .remove = __devexit_p(wl_remove),
1268 .id_table = wl_id_table,
1269 };
1270
1271 /**
1272 * This is the main entry point for the WL driver.
1273 *
1274 * This function determines if a device pointed to by pdev is a WL device,
1275 * and if so, performs a wl_attach() on it.
1276 *
1277 */
1278 static int __init wl_module_init(void)
1279 {
1280 int error = -ENODEV;
1281
1282 #ifdef BCMDBG
1283 if (msglevel != 0xdeadbeef)
1284 wl_msg_level = msglevel;
1285 else {
1286 char *var = getvar(NULL, "wl_msglevel");
1287 if (var) {
1288 unsigned long value;
1289
1290 (void)strict_strtoul(var, 0, &value);
1291 wl_msg_level = value;
1292 }
1293 }
1294 if (phymsglevel != 0xdeadbeef)
1295 phyhal_msg_level = phymsglevel;
1296 else {
1297 char *var = getvar(NULL, "phy_msglevel");
1298 if (var) {
1299 unsigned long value;
1300
1301 (void)strict_strtoul(var, 0, &value);
1302 phyhal_msg_level = value;
1303 }
1304 }
1305 #endif /* BCMDBG */
1306
1307 error = pci_register_driver(&wl_pci_driver);
1308 if (!error)
1309 return 0;
1310
1311
1312
1313 return error;
1314 }
1315
1316 /**
1317 * This function unloads the WL driver from the system.
1318 *
1319 * This function unconditionally unloads the WL driver module from the
1320 * system.
1321 *
1322 */
1323 static void __exit wl_module_exit(void)
1324 {
1325 pci_unregister_driver(&wl_pci_driver);
1326
1327 }
1328
1329 module_init(wl_module_init);
1330 module_exit(wl_module_exit);
1331
1332 /**
1333 * This function frees the WL per-device resources.
1334 *
1335 * This function frees resources owned by the WL device pointed to
1336 * by the wl parameter.
1337 *
1338 * precondition: can both be called locked and unlocked
1339 *
1340 */
1341 static void wl_free(struct wl_info *wl)
1342 {
1343 struct wl_timer *t, *next;
1344
1345 /* free ucode data */
1346 if (wl->fw.fw_cnt)
1347 wl_ucode_data_free();
1348 if (wl->irq)
1349 free_irq(wl->irq, wl);
1350
1351 /* kill dpc */
1352 tasklet_kill(&wl->tasklet);
1353
1354 if (wl->pub) {
1355 wlc_module_unregister(wl->pub, "linux", wl);
1356 }
1357
1358 /* free common resources */
1359 if (wl->wlc) {
1360 wlc_detach(wl->wlc);
1361 wl->wlc = NULL;
1362 wl->pub = NULL;
1363 }
1364
1365 /* virtual interface deletion is deferred so we cannot spinwait */
1366
1367 /* wait for all pending callbacks to complete */
1368 while (atomic_read(&wl->callbacks) > 0)
1369 schedule();
1370
1371 /* free timers */
1372 for (t = wl->timers; t; t = next) {
1373 next = t->next;
1374 #ifdef BCMDBG
1375 kfree(t->name);
1376 #endif
1377 kfree(t);
1378 }
1379
1380 /*
1381 * unregister_netdev() calls get_stats() which may read chip registers
1382 * so we cannot unmap the chip registers until after calling unregister_netdev() .
1383 */
1384 if (wl->regsva && wl->bcm_bustype != SDIO_BUS &&
1385 wl->bcm_bustype != JTAG_BUS) {
1386 iounmap((void *)wl->regsva);
1387 }
1388 wl->regsva = NULL;
1389 }
1390
1391 /* flags the given rate in rateset as requested */
1392 static void wl_set_basic_rate(struct wl_rateset *rs, u16 rate, bool is_br)
1393 {
1394 u32 i;
1395
1396 for (i = 0; i < rs->count; i++) {
1397 if (rate != (rs->rates[i] & 0x7f))
1398 continue;
1399
1400 if (is_br)
1401 rs->rates[i] |= WLC_RATE_FLAG;
1402 else
1403 rs->rates[i] &= WLC_RATE_MASK;
1404 return;
1405 }
1406 }
1407
1408 /*
1409 * precondition: perimeter lock has been acquired
1410 */
1411 void wl_txflowcontrol(struct wl_info *wl, struct wl_if *wlif, bool state,
1412 int prio)
1413 {
1414 wiphy_err(wl->wiphy, "Shouldn't be here %s\n", __func__);
1415 }
1416
1417 /*
1418 * precondition: perimeter lock has been acquired
1419 */
1420 void wl_init(struct wl_info *wl)
1421 {
1422 BCMMSG(WL_TO_HW(wl)->wiphy, "wl%d\n", wl->pub->unit);
1423 wl_reset(wl);
1424
1425 wlc_init(wl->wlc);
1426 }
1427
1428 /*
1429 * precondition: perimeter lock has been acquired
1430 */
1431 uint wl_reset(struct wl_info *wl)
1432 {
1433 BCMMSG(WL_TO_HW(wl)->wiphy, "wl%d\n", wl->pub->unit);
1434 wlc_reset(wl->wlc);
1435
1436 /* dpc will not be rescheduled */
1437 wl->resched = 0;
1438
1439 return 0;
1440 }
1441
1442 /*
1443 * These are interrupt on/off entry points. Disable interrupts
1444 * during interrupt state transition.
1445 */
1446 void wl_intrson(struct wl_info *wl)
1447 {
1448 unsigned long flags;
1449
1450 INT_LOCK(wl, flags);
1451 wlc_intrson(wl->wlc);
1452 INT_UNLOCK(wl, flags);
1453 }
1454
1455 /*
1456 * precondition: perimeter lock has been acquired
1457 */
1458 bool wl_alloc_dma_resources(struct wl_info *wl, uint addrwidth)
1459 {
1460 return true;
1461 }
1462
1463 u32 wl_intrsoff(struct wl_info *wl)
1464 {
1465 unsigned long flags;
1466 u32 status;
1467
1468 INT_LOCK(wl, flags);
1469 status = wlc_intrsoff(wl->wlc);
1470 INT_UNLOCK(wl, flags);
1471 return status;
1472 }
1473
1474 void wl_intrsrestore(struct wl_info *wl, u32 macintmask)
1475 {
1476 unsigned long flags;
1477
1478 INT_LOCK(wl, flags);
1479 wlc_intrsrestore(wl->wlc, macintmask);
1480 INT_UNLOCK(wl, flags);
1481 }
1482
1483 /*
1484 * precondition: perimeter lock has been acquired
1485 */
1486 int wl_up(struct wl_info *wl)
1487 {
1488 int error = 0;
1489
1490 if (wl->pub->up)
1491 return 0;
1492
1493 error = wlc_up(wl->wlc);
1494
1495 return error;
1496 }
1497
1498 /*
1499 * precondition: perimeter lock has been acquired
1500 */
1501 void wl_down(struct wl_info *wl)
1502 {
1503 uint callbacks, ret_val = 0;
1504
1505 /* call common down function */
1506 ret_val = wlc_down(wl->wlc);
1507 callbacks = atomic_read(&wl->callbacks) - ret_val;
1508
1509 /* wait for down callbacks to complete */
1510 WL_UNLOCK(wl);
1511
1512 /* For HIGH_only driver, it's important to actually schedule other work,
1513 * not just spin wait since everything runs at schedule level
1514 */
1515 SPINWAIT((atomic_read(&wl->callbacks) > callbacks), 100 * 1000);
1516
1517 WL_LOCK(wl);
1518 }
1519
1520 static irqreturn_t wl_isr(int irq, void *dev_id)
1521 {
1522 struct wl_info *wl;
1523 bool ours, wantdpc;
1524 unsigned long flags;
1525
1526 wl = (struct wl_info *) dev_id;
1527
1528 WL_ISRLOCK(wl, flags);
1529
1530 /* call common first level interrupt handler */
1531 ours = wlc_isr(wl->wlc, &wantdpc);
1532 if (ours) {
1533 /* if more to do... */
1534 if (wantdpc) {
1535
1536 /* ...and call the second level interrupt handler */
1537 /* schedule dpc */
1538 tasklet_schedule(&wl->tasklet);
1539 }
1540 }
1541
1542 WL_ISRUNLOCK(wl, flags);
1543
1544 return IRQ_RETVAL(ours);
1545 }
1546
1547 static void wl_dpc(unsigned long data)
1548 {
1549 struct wl_info *wl;
1550
1551 wl = (struct wl_info *) data;
1552
1553 WL_LOCK(wl);
1554
1555 /* call the common second level interrupt handler */
1556 if (wl->pub->up) {
1557 if (wl->resched) {
1558 unsigned long flags;
1559
1560 INT_LOCK(wl, flags);
1561 wlc_intrsupd(wl->wlc);
1562 INT_UNLOCK(wl, flags);
1563 }
1564
1565 wl->resched = wlc_dpc(wl->wlc, true);
1566 }
1567
1568 /* wlc_dpc() may bring the driver down */
1569 if (!wl->pub->up)
1570 goto done;
1571
1572 /* re-schedule dpc */
1573 if (wl->resched)
1574 tasklet_schedule(&wl->tasklet);
1575 else {
1576 /* re-enable interrupts */
1577 wl_intrson(wl);
1578 }
1579
1580 done:
1581 WL_UNLOCK(wl);
1582 }
1583
1584 /*
1585 * is called by the kernel from software irq context
1586 */
1587 static void wl_timer(unsigned long data)
1588 {
1589 _wl_timer((struct wl_timer *) data);
1590 }
1591
1592 /*
1593 * precondition: perimeter lock is not acquired
1594 */
1595 static void _wl_timer(struct wl_timer *t)
1596 {
1597 WL_LOCK(t->wl);
1598
1599 if (t->set) {
1600 if (t->periodic) {
1601 t->timer.expires = jiffies + t->ms * HZ / 1000;
1602 atomic_inc(&t->wl->callbacks);
1603 add_timer(&t->timer);
1604 t->set = true;
1605 } else
1606 t->set = false;
1607
1608 t->fn(t->arg);
1609 }
1610
1611 atomic_dec(&t->wl->callbacks);
1612
1613 WL_UNLOCK(t->wl);
1614 }
1615
1616 /*
1617 * Adds a timer to the list. Caller supplies a timer function.
1618 * Is called from wlc.
1619 *
1620 * precondition: perimeter lock has been acquired
1621 */
1622 struct wl_timer *wl_init_timer(struct wl_info *wl, void (*fn) (void *arg),
1623 void *arg, const char *name)
1624 {
1625 struct wl_timer *t;
1626
1627 t = kzalloc(sizeof(struct wl_timer), GFP_ATOMIC);
1628 if (!t) {
1629 wiphy_err(wl->wiphy, "wl%d: wl_init_timer: out of memory\n",
1630 wl->pub->unit);
1631 return 0;
1632 }
1633
1634 init_timer(&t->timer);
1635 t->timer.data = (unsigned long) t;
1636 t->timer.function = wl_timer;
1637 t->wl = wl;
1638 t->fn = fn;
1639 t->arg = arg;
1640 t->next = wl->timers;
1641 wl->timers = t;
1642
1643 #ifdef BCMDBG
1644 t->name = kmalloc(strlen(name) + 1, GFP_ATOMIC);
1645 if (t->name)
1646 strcpy(t->name, name);
1647 #endif
1648
1649 return t;
1650 }
1651
1652 /* BMAC_NOTE: Add timer adds only the kernel timer since it's going to be more accurate
1653 * as well as it's easier to make it periodic
1654 *
1655 * precondition: perimeter lock has been acquired
1656 */
1657 void wl_add_timer(struct wl_info *wl, struct wl_timer *t, uint ms, int periodic)
1658 {
1659 #ifdef BCMDBG
1660 if (t->set) {
1661 wiphy_err(wl->wiphy, "%s: Already set. Name: %s, per %d\n",
1662 __func__, t->name, periodic);
1663 }
1664 #endif
1665 t->ms = ms;
1666 t->periodic = (bool) periodic;
1667 t->set = true;
1668 t->timer.expires = jiffies + ms * HZ / 1000;
1669
1670 atomic_inc(&wl->callbacks);
1671 add_timer(&t->timer);
1672 }
1673
1674 /*
1675 * return true if timer successfully deleted, false if still pending
1676 *
1677 * precondition: perimeter lock has been acquired
1678 */
1679 bool wl_del_timer(struct wl_info *wl, struct wl_timer *t)
1680 {
1681 if (t->set) {
1682 t->set = false;
1683 if (!del_timer(&t->timer)) {
1684 return false;
1685 }
1686 atomic_dec(&wl->callbacks);
1687 }
1688
1689 return true;
1690 }
1691
1692 /*
1693 * precondition: perimeter lock has been acquired
1694 */
1695 void wl_free_timer(struct wl_info *wl, struct wl_timer *t)
1696 {
1697 struct wl_timer *tmp;
1698
1699 /* delete the timer in case it is active */
1700 wl_del_timer(wl, t);
1701
1702 if (wl->timers == t) {
1703 wl->timers = wl->timers->next;
1704 #ifdef BCMDBG
1705 kfree(t->name);
1706 #endif
1707 kfree(t);
1708 return;
1709
1710 }
1711
1712 tmp = wl->timers;
1713 while (tmp) {
1714 if (tmp->next == t) {
1715 tmp->next = t->next;
1716 #ifdef BCMDBG
1717 kfree(t->name);
1718 #endif
1719 kfree(t);
1720 return;
1721 }
1722 tmp = tmp->next;
1723 }
1724
1725 }
1726
1727 /*
1728 * runs in software irq context
1729 *
1730 * precondition: perimeter lock is not acquired
1731 */
1732 static int wl_linux_watchdog(void *ctx)
1733 {
1734 return 0;
1735 }
1736
1737 struct wl_fw_hdr {
1738 u32 offset;
1739 u32 len;
1740 u32 idx;
1741 };
1742
1743 char *wl_firmwares[WL_MAX_FW] = {
1744 "brcm/bcm43xx",
1745 NULL
1746 };
1747
1748 /*
1749 * precondition: perimeter lock has been acquired
1750 */
1751 int wl_ucode_init_buf(struct wl_info *wl, void **pbuf, u32 idx)
1752 {
1753 int i, entry;
1754 const u8 *pdata;
1755 struct wl_fw_hdr *hdr;
1756 for (i = 0; i < wl->fw.fw_cnt; i++) {
1757 hdr = (struct wl_fw_hdr *)wl->fw.fw_hdr[i]->data;
1758 for (entry = 0; entry < wl->fw.hdr_num_entries[i];
1759 entry++, hdr++) {
1760 if (hdr->idx == idx) {
1761 pdata = wl->fw.fw_bin[i]->data + hdr->offset;
1762 *pbuf = kmalloc(hdr->len, GFP_ATOMIC);
1763 if (*pbuf == NULL) {
1764 wiphy_err(wl->wiphy, "fail to alloc %d"
1765 " bytes\n", hdr->len);
1766 goto fail;
1767 }
1768 memcpy(*pbuf, pdata, hdr->len);
1769 return 0;
1770 }
1771 }
1772 }
1773 wiphy_err(wl->wiphy, "ERROR: ucode buf tag:%d can not be found!\n",
1774 idx);
1775 *pbuf = NULL;
1776 fail:
1777 return -ENODATA;
1778 }
1779
1780 /*
1781 * Precondition: Since this function is called in wl_pci_probe() context,
1782 * no locking is required.
1783 */
1784 int wl_ucode_init_uint(struct wl_info *wl, u32 *data, u32 idx)
1785 {
1786 int i, entry;
1787 const u8 *pdata;
1788 struct wl_fw_hdr *hdr;
1789 for (i = 0; i < wl->fw.fw_cnt; i++) {
1790 hdr = (struct wl_fw_hdr *)wl->fw.fw_hdr[i]->data;
1791 for (entry = 0; entry < wl->fw.hdr_num_entries[i];
1792 entry++, hdr++) {
1793 if (hdr->idx == idx) {
1794 pdata = wl->fw.fw_bin[i]->data + hdr->offset;
1795 if (hdr->len != 4) {
1796 wiphy_err(wl->wiphy,
1797 "ERROR: fw hdr len\n");
1798 return -ENOMSG;
1799 }
1800 *data = *((u32 *) pdata);
1801 return 0;
1802 }
1803 }
1804 }
1805 wiphy_err(wl->wiphy, "ERROR: ucode tag:%d can not be found!\n", idx);
1806 return -ENOMSG;
1807 }
1808
1809 /*
1810 * Precondition: Since this function is called in wl_pci_probe() context,
1811 * no locking is required.
1812 */
1813 static int wl_request_fw(struct wl_info *wl, struct pci_dev *pdev)
1814 {
1815 int status;
1816 struct device *device = &pdev->dev;
1817 char fw_name[100];
1818 int i;
1819
1820 memset((void *)&wl->fw, 0, sizeof(struct wl_firmware));
1821 for (i = 0; i < WL_MAX_FW; i++) {
1822 if (wl_firmwares[i] == NULL)
1823 break;
1824 sprintf(fw_name, "%s-%d.fw", wl_firmwares[i],
1825 UCODE_LOADER_API_VER);
1826 status = request_firmware(&wl->fw.fw_bin[i], fw_name, device);
1827 if (status) {
1828 wiphy_err(wl->wiphy, "%s: fail to load firmware %s\n",
1829 KBUILD_MODNAME, fw_name);
1830 return status;
1831 }
1832 sprintf(fw_name, "%s_hdr-%d.fw", wl_firmwares[i],
1833 UCODE_LOADER_API_VER);
1834 status = request_firmware(&wl->fw.fw_hdr[i], fw_name, device);
1835 if (status) {
1836 wiphy_err(wl->wiphy, "%s: fail to load firmware %s\n",
1837 KBUILD_MODNAME, fw_name);
1838 return status;
1839 }
1840 wl->fw.hdr_num_entries[i] =
1841 wl->fw.fw_hdr[i]->size / (sizeof(struct wl_fw_hdr));
1842 }
1843 wl->fw.fw_cnt = i;
1844 return wl_ucode_data_init(wl);
1845 }
1846
1847 /*
1848 * precondition: can both be called locked and unlocked
1849 */
1850 void wl_ucode_free_buf(void *p)
1851 {
1852 kfree(p);
1853 }
1854
1855 /*
1856 * Precondition: Since this function is called in wl_pci_probe() context,
1857 * no locking is required.
1858 */
1859 static void wl_release_fw(struct wl_info *wl)
1860 {
1861 int i;
1862 for (i = 0; i < WL_MAX_FW; i++) {
1863 release_firmware(wl->fw.fw_bin[i]);
1864 release_firmware(wl->fw.fw_hdr[i]);
1865 }
1866 }
1867
1868
1869 /*
1870 * checks validity of all firmware images loaded from user space
1871 *
1872 * Precondition: Since this function is called in wl_pci_probe() context,
1873 * no locking is required.
1874 */
1875 int wl_check_firmwares(struct wl_info *wl)
1876 {
1877 int i;
1878 int entry;
1879 int rc = 0;
1880 const struct firmware *fw;
1881 const struct firmware *fw_hdr;
1882 struct wl_fw_hdr *ucode_hdr;
1883 for (i = 0; i < WL_MAX_FW && rc == 0; i++) {
1884 fw = wl->fw.fw_bin[i];
1885 fw_hdr = wl->fw.fw_hdr[i];
1886 if (fw == NULL && fw_hdr == NULL) {
1887 break;
1888 } else if (fw == NULL || fw_hdr == NULL) {
1889 wiphy_err(wl->wiphy, "%s: invalid bin/hdr fw\n",
1890 __func__);
1891 rc = -EBADF;
1892 } else if (fw_hdr->size % sizeof(struct wl_fw_hdr)) {
1893 wiphy_err(wl->wiphy, "%s: non integral fw hdr file "
1894 "size %zu/%zu\n", __func__, fw_hdr->size,
1895 sizeof(struct wl_fw_hdr));
1896 rc = -EBADF;
1897 } else if (fw->size < MIN_FW_SIZE || fw->size > MAX_FW_SIZE) {
1898 wiphy_err(wl->wiphy, "%s: out of bounds fw file size "
1899 "%zu\n", __func__, fw->size);
1900 rc = -EBADF;
1901 } else {
1902 /* check if ucode section overruns firmware image */
1903 ucode_hdr = (struct wl_fw_hdr *)fw_hdr->data;
1904 for (entry = 0; entry < wl->fw.hdr_num_entries[i] &&
1905 !rc; entry++, ucode_hdr++) {
1906 if (ucode_hdr->offset + ucode_hdr->len >
1907 fw->size) {
1908 wiphy_err(wl->wiphy,
1909 "%s: conflicting bin/hdr\n",
1910 __func__);
1911 rc = -EBADF;
1912 }
1913 }
1914 }
1915 }
1916 if (rc == 0 && wl->fw.fw_cnt != i) {
1917 wiphy_err(wl->wiphy, "%s: invalid fw_cnt=%d\n", __func__,
1918 wl->fw.fw_cnt);
1919 rc = -EBADF;
1920 }
1921 return rc;
1922 }
1923
1924 /*
1925 * precondition: perimeter lock has been acquired
1926 */
1927 bool wl_rfkill_set_hw_state(struct wl_info *wl)
1928 {
1929 bool blocked = wlc_check_radio_disabled(wl->wlc);
1930
1931 WL_UNLOCK(wl);
1932 wiphy_rfkill_set_hw_state(wl->pub->ieee_hw->wiphy, blocked);
1933 if (blocked)
1934 wiphy_rfkill_start_polling(wl->pub->ieee_hw->wiphy);
1935 WL_LOCK(wl);
1936 return blocked;
1937 }
1938
1939 /*
1940 * precondition: perimeter lock has been acquired
1941 */
1942 void wl_msleep(struct wl_info *wl, uint ms)
1943 {
1944 WL_UNLOCK(wl);
1945 msleep(ms);
1946 WL_LOCK(wl);
1947 }
This page took 0.122635 seconds and 6 git commands to generate.