2 * FB driver for the UC1701 LCD Controller
4 * The display is monochrome and the video memory is RGB565.
5 * Any pixel value except 0 turns the pixel on.
7 * Copyright (C) 2014 Juergen Holzmann
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
20 #include <linux/module.h>
21 #include <linux/kernel.h>
22 #include <linux/init.h>
23 #include <linux/gpio.h>
24 #include <linux/spi/spi.h>
25 #include <linux/delay.h>
29 #define DRVNAME "fb_uc1701"
32 #define PAGES (HEIGHT / 8)
34 /* 1: Display on/off */
35 #define LCD_DISPLAY_ENABLE 0xAE
36 /* 2: display start line set */
37 #define LCD_START_LINE 0x40
38 /* 3: Page address set (lower 4 bits select one of the pages) */
39 #define LCD_PAGE_ADDRESS 0xB0
40 /* 4: column address */
41 #define LCD_COL_ADDRESS 0x10
42 /* 8: select orientation */
43 #define LCD_BOTTOMVIEW 0xA0
44 /* 9: inverted display */
45 #define LCD_DISPLAY_INVERT 0xA6
46 /* 10: show memory content or switch all pixels on */
47 #define LCD_ALL_PIXEL 0xA4
48 /* 11: lcd bias set */
50 /* 14: Reset Controller */
51 #define LCD_RESET_CMD 0xE2
52 /* 15: output mode select (turns display upside-down) */
53 #define LCD_SCAN_DIR 0xC0
54 /* 16: power control set */
55 #define LCD_POWER_CONTROL 0x28
56 /* 17: voltage regulator resistor ratio set */
57 #define LCD_VOLTAGE 0x20
58 /* 18: Volume mode set */
59 #define LCD_VOLUME_MODE 0x81
61 #define LCD_NO_OP 0xE3
62 /* 25: advanced program control */
63 #define LCD_ADV_PROG_CTRL 0xFA
64 /* 25: advanced program control2 */
65 #define LCD_ADV_PROG_CTRL2 0x10
66 #define LCD_TEMPCOMP_HIGH 0x80
67 /* column offset for normal orientation */
68 #define SHIFT_ADDR_NORMAL 0
69 /* column offset for bottom view orientation */
70 #define SHIFT_ADDR_TOPVIEW 30
72 static int init_display(struct fbtft_par
*par
)
74 par
->fbtftops
.reset(par
);
76 /* softreset of LCD */
77 write_reg(par
, LCD_RESET_CMD
);
81 write_reg(par
, LCD_START_LINE
);
83 /* select orientation BOTTOMVIEW */
84 write_reg(par
, LCD_BOTTOMVIEW
| 1);
86 /* output mode select (turns display upside-down) */
87 write_reg(par
, LCD_SCAN_DIR
| 0x00);
89 /* Normal Pixel mode */
90 write_reg(par
, LCD_ALL_PIXEL
| 0);
92 /* positive display */
93 write_reg(par
, LCD_DISPLAY_INVERT
| 0);
96 write_reg(par
, LCD_BIAS
| 0);
98 /* power control mode: all features on */
99 write_reg(par
, LCD_POWER_CONTROL
| 0x07);
101 /* set voltage regulator R/R */
102 write_reg(par
, LCD_VOLTAGE
| 0x07);
104 /* volume mode set */
105 write_reg(par
, LCD_VOLUME_MODE
);
106 write_reg(par
, 0x09);
107 write_reg(par
, LCD_NO_OP
);
109 /* advanced program control */
110 write_reg(par
, LCD_ADV_PROG_CTRL
);
111 write_reg(par
, LCD_ADV_PROG_CTRL2
| LCD_TEMPCOMP_HIGH
);
114 write_reg(par
, LCD_DISPLAY_ENABLE
| 1);
119 static void set_addr_win(struct fbtft_par
*par
, int xs
, int ys
, int xe
, int ye
)
122 write_reg(par
, LCD_PAGE_ADDRESS
);
123 write_reg(par
, 0x00);
124 write_reg(par
, LCD_COL_ADDRESS
);
127 static int write_vmem(struct fbtft_par
*par
, size_t offset
, size_t len
)
129 u16
*vmem16
= (u16
*)par
->info
->screen_buffer
;
130 u8
*buf
= par
->txbuf
.buf
;
134 for (y
= 0; y
< PAGES
; y
++) {
135 buf
= par
->txbuf
.buf
;
136 for (x
= 0; x
< WIDTH
; x
++) {
138 for (i
= 0; i
< 8; i
++)
139 *buf
|= (vmem16
[((y
* 8 * WIDTH
) +
145 write_reg(par
, LCD_PAGE_ADDRESS
| (u8
)y
);
146 write_reg(par
, 0x00);
147 write_reg(par
, LCD_COL_ADDRESS
);
148 gpio_set_value(par
->gpio
.dc
, 1);
149 ret
= par
->fbtftops
.write(par
, par
->txbuf
.buf
, WIDTH
);
150 gpio_set_value(par
->gpio
.dc
, 0);
154 dev_err(par
->info
->device
, "write failed and returned: %d\n",
160 static struct fbtft_display display
= {
165 .init_display
= init_display
,
166 .set_addr_win
= set_addr_win
,
167 .write_vmem
= write_vmem
,
172 FBTFT_REGISTER_DRIVER(DRVNAME
, "UltraChip,uc1701", &display
);
174 MODULE_ALIAS("spi:" DRVNAME
);
175 MODULE_ALIAS("spi:uc1701");
177 MODULE_DESCRIPTION("FB driver for the UC1701 LCD Controller");
178 MODULE_AUTHOR("Juergen Holzmann");
179 MODULE_LICENSE("GPL");
This page took 0.035757 seconds and 6 git commands to generate.