drivers/staging/keucr/usb.c

   1 #include <linux/sched.h>
   2 #include <linux/errno.h>
   3 #include <linux/freezer.h>
   4 #include <linux/module.h>
   5 #include <linux/slab.h>
   6 #include <linux/kthread.h>
   7 #include <linux/mutex.h>
   8 #include <linux/utsname.h>
   9
  10 #include <scsi/scsi.h>
  11 #include <scsi/scsi_cmnd.h>
  12 #include <scsi/scsi_device.h>
  13
  14 #include "usb.h"
  15 #include "scsiglue.h"
  16 #include "smil.h"
  17 #include "transport.h"
  18
  19 /* Some informational data */
  20 MODULE_AUTHOR("Domao");
  21 MODULE_DESCRIPTION("ENE USB Mass Storage driver for Linux");
  22 MODULE_LICENSE("GPL");
  23
  24 static unsigned int delay_use = 1;
  25
  26 static struct usb_device_id eucr_usb_ids[] = {
  27         { USB_DEVICE(0x058f, 0x6366) },
  28         { USB_DEVICE(0x0cf2, 0x6230) },
  29         { USB_DEVICE(0x0cf2, 0x6250) },
  30         { }                                            /* Terminating entry */
  31 };
  32 MODULE_DEVICE_TABLE(usb, eucr_usb_ids);
  33
  34
  35 #ifdef CONFIG_PM
  36
  37 static int eucr_suspend(struct usb_interface *iface, pm_message_t message)
  38 {
  39         struct us_data *us = usb_get_intfdata(iface);
  40         pr_info("--- eucr_suspend ---\n");
  41         /* Wait until no command is running */
  42         mutex_lock(&us->dev_mutex);
  43
  44         if (us->suspend_resume_hook)
  45                 (us->suspend_resume_hook)(us, US_SUSPEND);
  46
  47         mutex_unlock(&us->dev_mutex);
  48         return 0;
  49 }
  50
  51 static int eucr_resume(struct usb_interface *iface)
  52 {
  53         u8    tmp = 0;
  54
  55         struct us_data *us = usb_get_intfdata(iface);
  56         pr_info("--- eucr_resume---\n");
  57         mutex_lock(&us->dev_mutex);
  58
  59         if (us->suspend_resume_hook)
  60                 (us->suspend_resume_hook)(us, US_RESUME);
  61
  62
  63         mutex_unlock(&us->dev_mutex);
  64
  65         us->Power_IsResum = true;
  66
  67         us->SM_Status = *(struct keucr_sm_status *)&tmp;
  68
  69         return 0;
  70 }
  71
  72 static int eucr_reset_resume(struct usb_interface *iface)
  73 {
  74         u8    tmp = 0;
  75         struct us_data *us = usb_get_intfdata(iface);
  76
  77         pr_info("--- eucr_reset_resume---\n");
  78
  79         /* Report the reset to the SCSI core */
  80         usb_stor_report_bus_reset(us);
  81
  82         /*
  83          * FIXME: Notify the subdrivers that they need to reinitialize
  84          * the device
  85          */
  86
  87         us->Power_IsResum = true;
  88
  89         us->SM_Status = *(struct keucr_sm_status *)&tmp;
  90
  91         return 0;
  92 }
  93
  94 #else
  95
  96 #define eucr_suspend            NULL
  97 #define eucr_resume             NULL
  98 #define eucr_reset_resume       NULL
  99
 100 #endif
 101
 102 static int eucr_pre_reset(struct usb_interface *iface)
 103 {
 104         struct us_data *us = usb_get_intfdata(iface);
 105
 106         pr_info("usb --- eucr_pre_reset\n");
 107
 108         /* Make sure no command runs during the reset */
 109         mutex_lock(&us->dev_mutex);
 110         return 0;
 111 }
 112
 113 static int eucr_post_reset(struct usb_interface *iface)
 114 {
 115         struct us_data *us = usb_get_intfdata(iface);
 116
 117         pr_info("usb --- eucr_post_reset\n");
 118
 119         /* Report the reset to the SCSI core */
 120         usb_stor_report_bus_reset(us);
 121
 122         mutex_unlock(&us->dev_mutex);
 123         return 0;
 124 }
 125
 126 void fill_inquiry_response(struct us_data *us, unsigned char *data,
 127                                                         unsigned int data_len)
 128 {
 129         pr_info("usb --- fill_inquiry_response\n");
 130         if (data_len < 36) /* You lose. */
 131                 return;
 132
 133         if (data[0]&0x20) {
 134                 memset(data+8, 0, 28);
 135         } else {
 136                 u16 bcdDevice =
 137                         le16_to_cpu(us->pusb_dev->descriptor.bcdDevice);
 138                 memcpy(data+8, us->unusual_dev->vendorName,
 139                         strlen(us->unusual_dev->vendorName) > 8 ? 8 :
 140                         strlen(us->unusual_dev->vendorName));
 141                 memcpy(data+16, us->unusual_dev->productName,
 142                         strlen(us->unusual_dev->productName) > 16 ? 16 :
 143                         strlen(us->unusual_dev->productName));
 144                 data[32] = 0x30 + ((bcdDevice>>12) & 0x0F);
 145                 data[33] = 0x30 + ((bcdDevice>>8) & 0x0F);
 146                 data[34] = 0x30 + ((bcdDevice>>4) & 0x0F);
 147                 data[35] = 0x30 + ((bcdDevice) & 0x0F);
 148         }
 149         usb_stor_set_xfer_buf(us, data, data_len, us->srb, TO_XFER_BUF);
 150 }
 151
 152 static int usb_stor_control_thread(void *__us)
 153 {
 154         struct us_data *us = (struct us_data *)__us;
 155         struct Scsi_Host *host = us_to_host(us);
 156
 157         pr_info("usb --- usb_stor_control_thread\n");
 158         for (;;) {
 159                 if (wait_for_completion_interruptible(&us->cmnd_ready))
 160                         break;
 161
 162                 /* lock the device pointers */
 163                 mutex_lock(&(us->dev_mutex));
 164
 165                 /* if the device has disconnected, we are free to exit */
 166                 if (test_bit(US_FLIDX_DISCONNECTING, &us->dflags)) {
 167                         mutex_unlock(&us->dev_mutex);
 168                         break;
 169                 }
 170
 171                 /* lock access to the state */
 172                 scsi_lock(host);
 173
 174                 /* When we are called with no command pending, we're done */
 175                 if (us->srb == NULL) {
 176                         scsi_unlock(host);
 177                         mutex_unlock(&us->dev_mutex);
 178                         break;
 179                 }
 180
 181                 /* has the command timed out *already* ? */
 182                 if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) {
 183                         us->srb->result = DID_ABORT << 16;
 184                         goto SkipForAbort;
 185                 }
 186
 187                 scsi_unlock(host);
 188
 189                 if (us->srb->sc_data_direction == DMA_BIDIRECTIONAL) {
 190                         us->srb->result = DID_ERROR << 16;
 191                 } else if (us->srb->device->id
 192                            && !(us->fflags & US_FL_SCM_MULT_TARG)) {
 193                         us->srb->result = DID_BAD_TARGET << 16;
 194                 } else if (us->srb->device->lun > us->max_lun) {
 195                         us->srb->result = DID_BAD_TARGET << 16;
 196                 } else if ((us->srb->cmnd[0] == INQUIRY)
 197                            && (us->fflags & US_FL_FIX_INQUIRY)) {
 198                         unsigned char data_ptr[36] = {0x00, 0x80, 0x02, 0x02,
 199                                                 0x1F, 0x00, 0x00, 0x00};
 200
 201                         fill_inquiry_response(us, data_ptr, 36);
 202                         us->srb->result = SAM_STAT_GOOD;
 203                 } else {
 204                         us->proto_handler(us->srb, us);
 205                 }
 206
 207                 /* lock access to the state */
 208                 scsi_lock(host);
 209
 210                 /* indicate that the command is done */
 211                 if (us->srb->result != DID_ABORT << 16) {
 212                         us->srb->scsi_done(us->srb);
 213                 } else {
 214 SkipForAbort:
 215                         pr_info("scsi command aborted\n");
 216                 }
 217
 218                 if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) {
 219                         complete(&(us->notify));
 220
 221                         /* Allow USB transfers to resume */
 222                         clear_bit(US_FLIDX_ABORTING, &us->dflags);
 223                         clear_bit(US_FLIDX_TIMED_OUT, &us->dflags);
 224                 }
 225
 226                 /* finished working on this command */
 227                 us->srb = NULL;
 228                 scsi_unlock(host);
 229
 230                 /* unlock the device pointers */
 231                 mutex_unlock(&us->dev_mutex);
 232         } /* for (;;) */
 233
 234         /* Wait until we are told to stop */
 235         for (;;) {
 236                 set_current_state(TASK_INTERRUPTIBLE);
 237                 if (kthread_should_stop())
 238                         break;
 239                 schedule();
 240         }
 241         __set_current_state(TASK_RUNNING);
 242         return 0;
 243 }
 244
 245 static int associate_dev(struct us_data *us, struct usb_interface *intf)
 246 {
 247         pr_info("usb --- associate_dev\n");
 248
 249         /* Fill in the device-related fields */
 250         us->pusb_dev = interface_to_usbdev(intf);
 251         us->pusb_intf = intf;
 252         us->ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
 253
 254         /* Store our private data in the interface */
 255         usb_set_intfdata(intf, us);
 256
 257         /* Allocate the device-related DMA-mapped buffers */
 258         us->cr = usb_alloc_coherent(us->pusb_dev, sizeof(*us->cr), GFP_KERNEL,
 259                                                         &us->cr_dma);
 260         if (!us->cr) {
 261                 pr_info("usb_ctrlrequest allocation failed\n");
 262                 return -ENOMEM;
 263         }
 264
 265         us->iobuf = usb_alloc_coherent(us->pusb_dev, US_IOBUF_SIZE, GFP_KERNEL,
 266                                                         &us->iobuf_dma);
 267         if (!us->iobuf) {
 268                 pr_info("I/O buffer allocation failed\n");
 269                 return -ENOMEM;
 270         }
 271
 272         us->sensebuf = kmalloc(US_SENSE_SIZE, GFP_KERNEL);
 273         if (!us->sensebuf)
 274                 return -ENOMEM;
 275
 276         return 0;
 277 }
 278
 279 static int get_device_info(struct us_data *us, const struct usb_device_id *id)
 280 {
 281         struct usb_device *dev = us->pusb_dev;
 282         struct usb_interface_descriptor *idesc =
 283                                         &us->pusb_intf->cur_altsetting->desc;
 284
 285         pr_info("usb --- get_device_info\n");
 286
 287         us->subclass = idesc->bInterfaceSubClass;
 288         us->protocol = idesc->bInterfaceProtocol;
 289         us->fflags = id->driver_info;
 290         us->Power_IsResum = false;
 291
 292         if (us->fflags & US_FL_IGNORE_DEVICE) {
 293                 pr_info("device ignored\n");
 294                 return -ENODEV;
 295         }
 296
 297         if (dev->speed != USB_SPEED_HIGH)
 298                 us->fflags &= ~US_FL_GO_SLOW;
 299
 300         return 0;
 301 }
 302
 303 static int get_transport(struct us_data *us)
 304 {
 305         pr_info("usb --- get_transport\n");
 306         switch (us->protocol) {
 307         case USB_PR_BULK:
 308                 us->transport_name = "Bulk";
 309                 us->transport = usb_stor_Bulk_transport;
 310                 us->transport_reset = usb_stor_Bulk_reset;
 311                 break;
 312
 313         default:
 314                 return -EIO;
 315         }
 316
 317         /* fix for single-lun devices */
 318         if (us->fflags & US_FL_SINGLE_LUN)
 319                 us->max_lun = 0;
 320         return 0;
 321 }
 322
 323 static int get_protocol(struct us_data *us)
 324 {
 325         pr_info("usb --- get_protocol\n");
 326         pr_info("us->pusb_dev->descriptor.idVendor = %x\n",
 327                         us->pusb_dev->descriptor.idVendor);
 328         pr_info("us->pusb_dev->descriptor.idProduct = %x\n",
 329                         us->pusb_dev->descriptor.idProduct);
 330         switch (us->subclass) {
 331         case USB_SC_SCSI:
 332                 us->protocol_name = "Transparent SCSI";
 333                 if ((us->pusb_dev->descriptor.idVendor == 0x0CF2)
 334                     && (us->pusb_dev->descriptor.idProduct == 0x6250))
 335                         us->proto_handler = ENE_stor_invoke_transport;
 336                 else
 337                         us->proto_handler = usb_stor_invoke_transport;
 338                 break;
 339
 340         default:
 341                 return -EIO;
 342         }
 343         return 0;
 344 }
 345
 346 static int get_pipes(struct us_data *us)
 347 {
 348         struct usb_host_interface *altsetting = us->pusb_intf->cur_altsetting;
 349         int i;
 350         struct usb_endpoint_descriptor *ep;
 351         struct usb_endpoint_descriptor *ep_in = NULL;
 352         struct usb_endpoint_descriptor *ep_out = NULL;
 353         struct usb_endpoint_descriptor *ep_int = NULL;
 354
 355         pr_info("usb --- get_pipes\n");
 356
 357         for (i = 0; i < altsetting->desc.bNumEndpoints; i++) {
 358                 ep = &altsetting->endpoint[i].desc;
 359
 360                 if (usb_endpoint_xfer_bulk(ep)) {
 361                         if (usb_endpoint_dir_in(ep)) {
 362                                 if (!ep_in)
 363                                         ep_in = ep;
 364                         } else {
 365                                 if (!ep_out)
 366                                         ep_out = ep;
 367                         }
 368                 } else if (usb_endpoint_is_int_in(ep)) {
 369                         if (!ep_int)
 370                                 ep_int = ep;
 371                 }
 372         }
 373
 374         if (!ep_in || !ep_out || (us->protocol == USB_PR_CBI && !ep_int)) {
 375                 pr_info("Endpoint sanity check failed! Rejecting dev.\n");
 376                 return -EIO;
 377         }
 378
 379         /* Calculate and store the pipe values */
 380         us->send_ctrl_pipe = usb_sndctrlpipe(us->pusb_dev, 0);
 381         us->recv_ctrl_pipe = usb_rcvctrlpipe(us->pusb_dev, 0);
 382         us->send_bulk_pipe = usb_sndbulkpipe(us->pusb_dev,
 383                         ep_out->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
 384         us->recv_bulk_pipe = usb_rcvbulkpipe(us->pusb_dev,
 385                         ep_in->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
 386         if (ep_int) {
 387                 us->recv_intr_pipe = usb_rcvintpipe(us->pusb_dev,
 388                         ep_int->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
 389                 us->ep_bInterval = ep_int->bInterval;
 390         }
 391         return 0;
 392 }
 393
 394 static int usb_stor_acquire_resources(struct us_data *us)
 395 {
 396         struct task_struct *th;
 397
 398         pr_info("usb --- usb_stor_acquire_resources\n");
 399         us->current_urb = usb_alloc_urb(0, GFP_KERNEL);
 400         if (!us->current_urb) {
 401                 pr_info("URB allocation failed\n");
 402                 return -ENOMEM;
 403         }
 404
 405         /* Start up our control thread */
 406         th = kthread_run(usb_stor_control_thread, us, "eucr-storage");
 407         if (IS_ERR(th)) {
 408                 pr_info("Unable to start control thread\n");
 409                 return PTR_ERR(th);
 410         }
 411         us->ctl_thread = th;
 412
 413         return 0;
 414 }
 415
 416 static void usb_stor_release_resources(struct us_data *us)
 417 {
 418         pr_info("usb --- usb_stor_release_resources\n");
 419
 420         SM_FreeMem();
 421
 422         complete(&us->cmnd_ready);
 423         if (us->ctl_thread)
 424                 kthread_stop(us->ctl_thread);
 425
 426         /* Call the destructor routine, if it exists */
 427         if (us->extra_destructor) {
 428                 pr_info("-- calling extra_destructor()\n");
 429                 us->extra_destructor(us->extra);
 430         }
 431
 432         /* Free the extra data and the URB */
 433         kfree(us->extra);
 434         usb_free_urb(us->current_urb);
 435 }
 436
 437 static void dissociate_dev(struct us_data *us)
 438 {
 439         pr_info("usb --- dissociate_dev\n");
 440
 441         kfree(us->sensebuf);
 442
 443         /* Free the device-related DMA-mapped buffers */
 444         usb_free_coherent(us->pusb_dev, sizeof(*us->cr), us->cr, us->cr_dma);
 445         usb_free_coherent(us->pusb_dev, US_IOBUF_SIZE, us->iobuf,
 446                           us->iobuf_dma);
 447
 448         /* Remove our private data from the interface */
 449         usb_set_intfdata(us->pusb_intf, NULL);
 450 }
 451
 452 static void quiesce_and_remove_host(struct us_data *us)
 453 {
 454         struct Scsi_Host *host = us_to_host(us);
 455
 456         pr_info("usb --- quiesce_and_remove_host\n");
 457
 458         /* If the device is really gone, cut short reset delays */
 459         if (us->pusb_dev->state == USB_STATE_NOTATTACHED)
 460                 set_bit(US_FLIDX_DISCONNECTING, &us->dflags);
 461
 462         /*
 463          * Prevent SCSI-scanning (if it hasn't started yet)
 464          * and wait for the SCSI-scanning thread to stop.
 465          */
 466         set_bit(US_FLIDX_DONT_SCAN, &us->dflags);
 467         wake_up(&us->delay_wait);
 468         wait_for_completion(&us->scanning_done);
 469
 470         /*
 471          * Removing the host will perform an orderly shutdown: caches
 472          * synchronized, disks spun down, etc.
 473          */
 474         scsi_remove_host(host);
 475
 476         /*
 477          * Prevent any new commands from being accepted and cut short
 478          * reset delays.
 479          */
 480         scsi_lock(host);
 481         set_bit(US_FLIDX_DISCONNECTING, &us->dflags);
 482         scsi_unlock(host);
 483         wake_up(&us->delay_wait);
 484 }
 485
 486 static void release_everything(struct us_data *us)
 487 {
 488         pr_info("usb --- release_everything\n");
 489
 490         usb_stor_release_resources(us);
 491         dissociate_dev(us);
 492         scsi_host_put(us_to_host(us));
 493 }
 494
 495 static int usb_stor_scan_thread(void *__us)
 496 {
 497         struct us_data *us = (struct us_data *)__us;
 498
 499         pr_info("usb --- usb_stor_scan_thread\n");
 500         pr_info("EUCR : device found at %d\n", us->pusb_dev->devnum);
 501
 502         set_freezable();
 503         /* Wait for the timeout to expire or for a disconnect */
 504         if (delay_use > 0) {
 505                 wait_event_freezable_timeout(us->delay_wait,
 506                                 test_bit(US_FLIDX_DONT_SCAN, &us->dflags),
 507                                 delay_use * HZ);
 508         }
 509
 510         /* If the device is still connected, perform the scanning */
 511         if (!test_bit(US_FLIDX_DONT_SCAN, &us->dflags)) {
 512                 /* For bulk-only devices, determine the max LUN value */
 513                 if (us->protocol == USB_PR_BULK
 514                     && !(us->fflags & US_FL_SINGLE_LUN)) {
 515                         mutex_lock(&us->dev_mutex);
 516                         us->max_lun = usb_stor_Bulk_max_lun(us);
 517                         mutex_unlock(&us->dev_mutex);
 518                 }
 519                 scsi_scan_host(us_to_host(us));
 520                 pr_info("EUCR : device scan complete\n");
 521         }
 522         complete_and_exit(&us->scanning_done, 0);
 523 }
 524
 525 static int eucr_probe(struct usb_interface *intf,
 526                                         const struct usb_device_id *id)
 527 {
 528         struct Scsi_Host *host;
 529         struct us_data *us;
 530         int result;
 531         u8      MiscReg03 = 0;
 532         struct task_struct *th;
 533
 534         pr_info("usb --- eucr_probe\n");
 535
 536         host = scsi_host_alloc(&usb_stor_host_template, sizeof(*us));
 537         if (!host) {
 538                 pr_info("Unable to allocate the scsi host\n");
 539                 return -ENOMEM;
 540         }
 541
 542         /* Allow 16-byte CDBs and thus > 2TB */
 543         host->max_cmd_len = 16;
 544         us = host_to_us(host);
 545         memset(us, 0, sizeof(struct us_data));
 546         mutex_init(&(us->dev_mutex));
 547         init_completion(&us->cmnd_ready);
 548         init_completion(&(us->notify));
 549         init_waitqueue_head(&us->delay_wait);
 550         init_completion(&us->scanning_done);
 551
 552         /* Associate the us_data structure with the USB device */
 553         result = associate_dev(us, intf);
 554         if (result)
 555                 goto BadDevice;
 556
 557         /* Get Device info */
 558         result = get_device_info(us, id);
 559         if (result)
 560                 goto BadDevice;
 561
 562         /* Get the transport, protocol, and pipe settings */
 563         result = get_transport(us);
 564         if (result)
 565                 goto BadDevice;
 566         result = get_protocol(us);
 567         if (result)
 568                 goto BadDevice;
 569         result = get_pipes(us);
 570         if (result)
 571                 goto BadDevice;
 572
 573         /* Acquire all the other resources and add the host */
 574         result = usb_stor_acquire_resources(us);
 575         if (result)
 576                 goto BadDevice;
 577
 578         result = scsi_add_host(host, &intf->dev);
 579         if (result) {
 580                 pr_info("Unable to add the scsi host\n");
 581                 goto BadDevice;
 582         }
 583
 584         /* Start up the thread for delayed SCSI-device scanning */
 585         th = kthread_create(usb_stor_scan_thread, us, "eucr-stor-scan");
 586         if (IS_ERR(th)) {
 587                 pr_info("Unable to start the device-scanning thread\n");
 588                 complete(&us->scanning_done);
 589                 quiesce_and_remove_host(us);
 590                 result = PTR_ERR(th);
 591                 goto BadDevice;
 592         }
 593         wake_up_process(th);
 594
 595         /* probe card type */
 596         result = ene_read_byte(us, REG_CARD_STATUS, &MiscReg03);
 597         if (result != USB_STOR_XFER_GOOD) {
 598                 result = USB_STOR_TRANSPORT_ERROR;
 599                 quiesce_and_remove_host(us);
 600                 goto BadDevice;
 601         }
 602
 603         if (!(MiscReg03 & 0x02)) {
 604                 result = -ENODEV;
 605                 quiesce_and_remove_host(us);
 606                 pr_info("keucr: The driver only supports SM/MS card. To use SD card, please build driver/usb/storage/ums-eneub6250.ko\n");
 607                 goto BadDevice;
 608         }
 609
 610         return 0;
 611
 612         /* We come here if there are any problems */
 613 BadDevice:
 614         pr_info("usb --- eucr_probe failed\n");
 615         release_everything(us);
 616         return result;
 617 }
 618
 619 static void eucr_disconnect(struct usb_interface *intf)
 620 {
 621         struct us_data *us = usb_get_intfdata(intf);
 622
 623         pr_info("usb --- eucr_disconnect\n");
 624         quiesce_and_remove_host(us);
 625         release_everything(us);
 626 }
 627
 628 /* Initialization and registration */
 629 static struct usb_driver usb_storage_driver = {
 630         .name =         "eucr",
 631         .probe =                eucr_probe,
 632         .suspend =          eucr_suspend,
 633         .resume =           eucr_resume,
 634         .reset_resume = eucr_reset_resume,
 635         .disconnect =   eucr_disconnect,
 636         .pre_reset =    eucr_pre_reset,
 637         .post_reset =   eucr_post_reset,
 638         .id_table =             eucr_usb_ids,
 639         .soft_unbind =  1,
 640 };
 641
 642 module_usb_driver(usb_storage_driver);