drivers/staging/keucr/usb.h

   1 /* Driver for USB Mass Storage compliant devices */
   2
   3 #ifndef _USB_H_
   4 #define _USB_H_
   5
   6 #include <linux/usb.h>
   7 #include <linux/usb_usual.h>
   8 #include <linux/blkdev.h>
   9 #include <linux/completion.h>
  10 #include <linux/mutex.h>
  11 #include <scsi/scsi_host.h>
  12 #include "common.h"
  13
  14 struct us_data;
  15 struct scsi_cmnd;
  16
  17 /*
  18  * Unusual device list definitions
  19  */
  20
  21 struct us_unusual_dev {
  22         const char *vendorName;
  23         const char *productName;
  24         __u8  useProtocol;
  25         __u8  useTransport;
  26         int (*initFunction)(struct us_data *);
  27 };
  28
  29 /* EnE HW Register */
  30 #define REG_CARD_STATUS     0xFF83
  31 #define REG_HW_TRAP1        0xFF89
  32
  33 /* SRB Status. Refers /usr/include/wine/wine/wnaspi32.h & SCSI sense key */
  34 #define SS_SUCCESS                  0x00      /* No Sense */
  35 #define SS_NOT_READY                0x02
  36 #define SS_MEDIUM_ERR               0x03
  37 #define SS_HW_ERR                   0x04
  38 #define SS_ILLEGAL_REQUEST          0x05
  39 #define SS_UNIT_ATTENTION           0x06
  40
  41 /* ENE Load FW Pattern */
  42 #define SD_INIT1_PATTERN   1
  43 #define SD_INIT2_PATTERN   2
  44 #define SD_RW_PATTERN      3
  45 #define MS_INIT_PATTERN    4
  46 #define MSP_RW_PATTERN     5
  47 #define MS_RW_PATTERN      6
  48 #define SM_INIT_PATTERN    7
  49 #define SM_RW_PATTERN      8
  50
  51 #define FDIR_WRITE        0
  52 #define FDIR_READ         1
  53
  54 struct keucr_sd_status {
  55         u8    Insert:1;
  56         u8    Ready:1;
  57         u8    MediaChange:1;
  58         u8    IsMMC:1;
  59         u8    HiCapacity:1;
  60         u8    HiSpeed:1;
  61         u8    WtP:1;
  62         u8    Reserved:1;
  63 };
  64
  65 struct keucr_ms_status {
  66         u8    Insert:1;
  67         u8    Ready:1;
  68         u8    MediaChange:1;
  69         u8    IsMSPro:1;
  70         u8    IsMSPHG:1;
  71         u8    Reserved1:1;
  72         u8    WtP:1;
  73         u8    Reserved2:1;
  74 };
  75
  76 struct keucr_sm_status {
  77         u8    Insert:1;
  78         u8    Ready:1;
  79         u8    MediaChange:1;
  80         u8    Reserved:3;
  81         u8    WtP:1;
  82         u8    IsMS:1;
  83 };
  84
  85 /* SD Block Length */
  86 #define SD_BLOCK_LEN            9       /* 2^9 = 512 Bytes,
  87                                 The HW maximum read/write data length */
  88
  89 /* Dynamic bitflag definitions (us->dflags): used in set_bit() etc. */
  90 #define US_FLIDX_URB_ACTIVE     0       /* current_urb is in use    */
  91 #define US_FLIDX_SG_ACTIVE      1       /* current_sg is in use     */
  92 #define US_FLIDX_ABORTING       2       /* abort is in progress     */
  93 #define US_FLIDX_DISCONNECTING  3       /* disconnect in progress   */
  94 #define US_FLIDX_RESETTING      4       /* device reset in progress */
  95 #define US_FLIDX_TIMED_OUT      5       /* SCSI midlayer timed out  */
  96 #define US_FLIDX_DONT_SCAN      6       /* don't scan (disconnect)  */
  97
  98
  99 #define USB_STOR_STRING_LEN 32
 100
 101 /*
 102  * We provide a DMA-mapped I/O buffer for use with small USB transfers.
 103  * It turns out that CB[I] needs a 12-byte buffer and Bulk-only needs a
 104  * 31-byte buffer.  But Freecom needs a 64-byte buffer, so that's the
 105  * size we'll allocate.
 106  */
 107
 108 #define US_IOBUF_SIZE           64      /* Size of the DMA-mapped I/O buffer */
 109 #define US_SENSE_SIZE           18      /* Size of the autosense data buffer */
 110
 111 typedef int (*trans_cmnd)(struct scsi_cmnd *, struct us_data *);
 112 typedef int (*trans_reset)(struct us_data *);
 113 typedef void (*proto_cmnd)(struct scsi_cmnd *, struct us_data *);
 114 typedef void (*extra_data_destructor)(void *);  /* extra data destructor */
 115 typedef void (*pm_hook)(struct us_data *, int); /* power management hook */
 116
 117 #define US_SUSPEND      0
 118 #define US_RESUME       1
 119
 120 /* we allocate one of these for every device that we remember */
 121 struct us_data {
 122         /* The device we're working with
 123          * It's important to note:
 124          *    (o) you must hold dev_mutex to change pusb_dev
 125          */
 126         struct mutex            dev_mutex;       /* protect pusb_dev */
 127         struct usb_device       *pusb_dev;       /* this usb_device */
 128         struct usb_interface    *pusb_intf;      /* this interface */
 129         struct us_unusual_dev   *unusual_dev;    /* device-filter entry     */
 130         unsigned long           fflags;          /* fixed flags from filter */
 131         unsigned long           dflags;          /* dynamic atomic bitflags */
 132         unsigned int            send_bulk_pipe;  /* cached pipe values */
 133         unsigned int            recv_bulk_pipe;
 134         unsigned int            send_ctrl_pipe;
 135         unsigned int            recv_ctrl_pipe;
 136         unsigned int            recv_intr_pipe;
 137
 138         /* information about the device */
 139         char                    *transport_name;
 140         char                    *protocol_name;
 141         __le32                  bcs_signature;
 142         u8                      subclass;
 143         u8                      protocol;
 144         u8                      max_lun;
 145
 146         u8                      ifnum;           /* interface number   */
 147         u8                      ep_bInterval;    /* interrupt interval */
 148
 149         /* function pointers for this device */
 150         trans_cmnd              transport;       /* transport function     */
 151         trans_reset             transport_reset; /* transport device reset */
 152         proto_cmnd              proto_handler;   /* protocol handler       */
 153
 154         /* SCSI interfaces */
 155         struct scsi_cmnd        *srb;            /* current srb         */
 156         unsigned int            tag;             /* current dCBWTag     */
 157
 158         /* control and bulk communications data */
 159         struct urb              *current_urb;    /* USB requests         */
 160         struct usb_ctrlrequest  *cr;             /* control requests     */
 161         struct usb_sg_request   current_sg;      /* scatter-gather req.  */
 162         unsigned char           *iobuf;          /* I/O buffer           */
 163         unsigned char           *sensebuf;       /* sense data buffer    */
 164         dma_addr_t              cr_dma;          /* buffer DMA addresses */
 165         dma_addr_t              iobuf_dma;
 166         struct task_struct      *ctl_thread;     /* the control thread   */
 167
 168         /* mutual exclusion and synchronization structures */
 169         struct completion       cmnd_ready;      /* to sleep thread on      */
 170         struct completion       notify;          /* thread begin/end        */
 171         wait_queue_head_t       delay_wait;      /* wait during scan, reset */
 172         struct completion       scanning_done;   /* wait for scan thread    */
 173
 174         /* subdriver information */
 175         void                    *extra;          /* Any extra data          */
 176         extra_data_destructor   extra_destructor;/* extra data destructor   */
 177 #ifdef CONFIG_PM
 178         pm_hook                 suspend_resume_hook;
 179 #endif
 180         /* for 6250 code */
 181         struct keucr_sd_status   SD_Status;
 182         struct keucr_ms_status   MS_Status;
 183         struct keucr_sm_status   SM_Status;
 184
 185         /* ----- SD Control Data ---------------- */
 186         /* SD_REGISTER SD_Regs; */
 187         u16        SD_Block_Mult;
 188         u8        SD_READ_BL_LEN;
 189         u16        SD_C_SIZE;
 190         u8        SD_C_SIZE_MULT;
 191
 192         /* SD/MMC New spec. */
 193         u8        SD_SPEC_VER;
 194         u8        SD_CSD_VER;
 195         u8        SD20_HIGH_CAPACITY;
 196         u32       HC_C_SIZE;
 197         u8        MMC_SPEC_VER;
 198         u8        MMC_BusWidth;
 199         u8        MMC_HIGH_CAPACITY;
 200
 201         /* ----- MS Control Data ---------------- */
 202         bool             MS_SWWP;
 203         u32               MSP_TotalBlock;
 204         /* MS_LibControl       MS_Lib; */
 205         bool             MS_IsRWPage;
 206         u16                MS_Model;
 207
 208         /* ----- SM Control Data ---------------- */
 209         u8              SM_DeviceID;
 210         u8              SM_CardID;
 211
 212         u8 *testbuf;
 213         u8              BIN_FLAG;
 214         u32             bl_num;
 215         int             SrbStatus;
 216
 217         /* ------Power Managerment --------------- */
 218         bool         Power_IsResum;
 219 };
 220
 221 /* Convert between us_data and the corresponding Scsi_Host */
 222 static inline struct Scsi_Host *us_to_host(struct us_data *us)
 223 {
 224         return container_of((void *) us, struct Scsi_Host, hostdata);
 225 }
 226 static inline struct us_data *host_to_us(struct Scsi_Host *host)
 227 {
 228         return (struct us_data *) host->hostdata;
 229 }
 230
 231 /* Function to fill an inquiry response. See usb.c for details */
 232 extern void fill_inquiry_response(struct us_data *us,
 233         unsigned char *data, unsigned int data_len);
 234
 235 /* The scsi_lock() and scsi_unlock() macros protect the sm_state and the
 236  * single queue element srb for write access */
 237 #define scsi_unlock(host)       spin_unlock_irq(host->host_lock)
 238 #define scsi_lock(host)         spin_lock_irq(host->host_lock)
 239
 240 #endif