projects / deliverable / linux.git / blob
? search:


bd85e32521d249729e0da41849ac58e48a1ab0c0
[deliverable/linux.git] / drivers / tty / serial / atmel_serial.c
1 /*
2 * Driver for Atmel AT91 / AT32 Serial ports
3 * Copyright (C) 2003 Rick Bronson
4 *
5 * Based on drivers/char/serial_sa1100.c, by Deep Blue Solutions Ltd.
6 * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
7 *
8 * DMA support added by Chip Coldwell.
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
14 *
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
19 *
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
23 *
24 */
25 #include <linux/module.h>
26 #include <linux/tty.h>
27 #include <linux/ioport.h>
28 #include <linux/slab.h>
29 #include <linux/init.h>
30 #include <linux/serial.h>
31 #include <linux/clk.h>
32 #include <linux/console.h>
33 #include <linux/sysrq.h>
34 #include <linux/tty_flip.h>
35 #include <linux/platform_device.h>
36 #include <linux/of.h>
37 #include <linux/of_device.h>
38 #include <linux/dma-mapping.h>
39 #include <linux/atmel_pdc.h>
40 #include <linux/atmel_serial.h>
41 #include <linux/uaccess.h>
42
43 #include <asm/io.h>
44 #include <asm/ioctls.h>
45
46 #include <asm/mach/serial_at91.h>
47 #include <mach/board.h>
48
49 #ifdef CONFIG_ARM
50 #include <mach/cpu.h>
51 #include <asm/gpio.h>
52 #endif
53
54 #define PDC_BUFFER_SIZE 512
55 /* Revisit: We should calculate this based on the actual port settings */
56 #define PDC_RX_TIMEOUT (3 * 10) /* 3 bytes */
57
58 #if defined(CONFIG_SERIAL_ATMEL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
59 #define SUPPORT_SYSRQ
60 #endif
61
62 #include <linux/serial_core.h>
63
64 static void atmel_start_rx(struct uart_port *port);
65 static void atmel_stop_rx(struct uart_port *port);
66
67 #ifdef CONFIG_SERIAL_ATMEL_TTYAT
68
69 /* Use device name ttyAT, major 204 and minor 154-169. This is necessary if we
70 * should coexist with the 8250 driver, such as if we have an external 16C550
71 * UART. */
72 #define SERIAL_ATMEL_MAJOR 204
73 #define MINOR_START 154
74 #define ATMEL_DEVICENAME "ttyAT"
75
76 #else
77
78 /* Use device name ttyS, major 4, minor 64-68. This is the usual serial port
79 * name, but it is legally reserved for the 8250 driver. */
80 #define SERIAL_ATMEL_MAJOR TTY_MAJOR
81 #define MINOR_START 64
82 #define ATMEL_DEVICENAME "ttyS"
83
84 #endif
85
86 #define ATMEL_ISR_PASS_LIMIT 256
87
88 /* UART registers. CR is write-only, hence no GET macro */
89 #define UART_PUT_CR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_CR)
90 #define UART_GET_MR(port) __raw_readl((port)->membase + ATMEL_US_MR)
91 #define UART_PUT_MR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_MR)
92 #define UART_PUT_IER(port,v) __raw_writel(v, (port)->membase + ATMEL_US_IER)
93 #define UART_PUT_IDR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_IDR)
94 #define UART_GET_IMR(port) __raw_readl((port)->membase + ATMEL_US_IMR)
95 #define UART_GET_CSR(port) __raw_readl((port)->membase + ATMEL_US_CSR)
96 #define UART_GET_CHAR(port) __raw_readl((port)->membase + ATMEL_US_RHR)
97 #define UART_PUT_CHAR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_THR)
98 #define UART_GET_BRGR(port) __raw_readl((port)->membase + ATMEL_US_BRGR)
99 #define UART_PUT_BRGR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_BRGR)
100 #define UART_PUT_RTOR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_RTOR)
101 #define UART_PUT_TTGR(port, v) __raw_writel(v, (port)->membase + ATMEL_US_TTGR)
102
103 /* PDC registers */
104 #define UART_PUT_PTCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_PTCR)
105 #define UART_GET_PTSR(port) __raw_readl((port)->membase + ATMEL_PDC_PTSR)
106
107 #define UART_PUT_RPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RPR)
108 #define UART_GET_RPR(port) __raw_readl((port)->membase + ATMEL_PDC_RPR)
109 #define UART_PUT_RCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RCR)
110 #define UART_PUT_RNPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RNPR)
111 #define UART_PUT_RNCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RNCR)
112
113 #define UART_PUT_TPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_TPR)
114 #define UART_PUT_TCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_TCR)
115 #define UART_GET_TCR(port) __raw_readl((port)->membase + ATMEL_PDC_TCR)
116
117 static int (*atmel_open_hook)(struct uart_port *);
118 static void (*atmel_close_hook)(struct uart_port *);
119
120 struct atmel_dma_buffer {
121 unsigned char *buf;
122 dma_addr_t dma_addr;
123 unsigned int dma_size;
124 unsigned int ofs;
125 };
126
127 struct atmel_uart_char {
128 u16 status;
129 u16 ch;
130 };
131
132 #define ATMEL_SERIAL_RINGSIZE 1024
133
134 /*
135 * We wrap our port structure around the generic uart_port.
136 */
137 struct atmel_uart_port {
138 struct uart_port uart; /* uart */
139 struct clk *clk; /* uart clock */
140 int may_wakeup; /* cached value of device_may_wakeup for times we need to disable it */
141 u32 backup_imr; /* IMR saved during suspend */
142 int break_active; /* break being received */
143
144 short use_dma_rx; /* enable PDC receiver */
145 short pdc_rx_idx; /* current PDC RX buffer */
146 struct atmel_dma_buffer pdc_rx[2]; /* PDC receier */
147
148 short use_dma_tx; /* enable PDC transmitter */
149 struct atmel_dma_buffer pdc_tx; /* PDC transmitter */
150
151 struct tasklet_struct tasklet;
152 unsigned int irq_status;
153 unsigned int irq_status_prev;
154
155 struct circ_buf rx_ring;
156
157 struct serial_rs485 rs485; /* rs485 settings */
158 unsigned int tx_done_mask;
159 };
160
161 static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART];
162 static unsigned long atmel_ports_in_use;
163
164 #ifdef SUPPORT_SYSRQ
165 static struct console atmel_console;
166 #endif
167
168 #if defined(CONFIG_OF)
169 static const struct of_device_id atmel_serial_dt_ids[] = {
170 { .compatible = "atmel,at91rm9200-usart" },
171 { .compatible = "atmel,at91sam9260-usart" },
172 { /* sentinel */ }
173 };
174
175 MODULE_DEVICE_TABLE(of, atmel_serial_dt_ids);
176 #endif
177
178 static inline struct atmel_uart_port *
179 to_atmel_uart_port(struct uart_port *uart)
180 {
181 return container_of(uart, struct atmel_uart_port, uart);
182 }
183
184 #ifdef CONFIG_SERIAL_ATMEL_PDC
185 static bool atmel_use_dma_rx(struct uart_port *port)
186 {
187 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
188
189 return atmel_port->use_dma_rx;
190 }
191
192 static bool atmel_use_dma_tx(struct uart_port *port)
193 {
194 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
195
196 return atmel_port->use_dma_tx;
197 }
198 #else
199 static bool atmel_use_dma_rx(struct uart_port *port)
200 {
201 return false;
202 }
203
204 static bool atmel_use_dma_tx(struct uart_port *port)
205 {
206 return false;
207 }
208 #endif
209
210 /* Enable or disable the rs485 support */
211 void atmel_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf)
212 {
213 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
214 unsigned int mode;
215
216 spin_lock(&port->lock);
217
218 /* Disable interrupts */
219 UART_PUT_IDR(port, atmel_port->tx_done_mask);
220
221 mode = UART_GET_MR(port);
222
223 /* Resetting serial mode to RS232 (0x0) */
224 mode &= ~ATMEL_US_USMODE;
225
226 atmel_port->rs485 = *rs485conf;
227
228 if (rs485conf->flags & SER_RS485_ENABLED) {
229 dev_dbg(port->dev, "Setting UART to RS485\n");
230 atmel_port->tx_done_mask = ATMEL_US_TXEMPTY;
231 if ((rs485conf->delay_rts_after_send) > 0)
232 UART_PUT_TTGR(port, rs485conf->delay_rts_after_send);
233 mode |= ATMEL_US_USMODE_RS485;
234 } else {
235 dev_dbg(port->dev, "Setting UART to RS232\n");
236 if (atmel_use_dma_tx(port))
237 atmel_port->tx_done_mask = ATMEL_US_ENDTX |
238 ATMEL_US_TXBUFE;
239 else
240 atmel_port->tx_done_mask = ATMEL_US_TXRDY;
241 }
242 UART_PUT_MR(port, mode);
243
244 /* Enable interrupts */
245 UART_PUT_IER(port, atmel_port->tx_done_mask);
246
247 spin_unlock(&port->lock);
248
249 }
250
251 /*
252 * Return TIOCSER_TEMT when transmitter FIFO and Shift register is empty.
253 */
254 static u_int atmel_tx_empty(struct uart_port *port)
255 {
256 return (UART_GET_CSR(port) & ATMEL_US_TXEMPTY) ? TIOCSER_TEMT : 0;
257 }
258
259 /*
260 * Set state of the modem control output lines
261 */
262 static void atmel_set_mctrl(struct uart_port *port, u_int mctrl)
263 {
264 unsigned int control = 0;
265 unsigned int mode;
266 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
267
268 #ifdef CONFIG_ARCH_AT91RM9200
269 if (cpu_is_at91rm9200()) {
270 /*
271 * AT91RM9200 Errata #39: RTS0 is not internally connected
272 * to PA21. We need to drive the pin manually.
273 */
274 if (port->mapbase == AT91RM9200_BASE_US0) {
275 if (mctrl & TIOCM_RTS)
276 at91_set_gpio_value(AT91_PIN_PA21, 0);
277 else
278 at91_set_gpio_value(AT91_PIN_PA21, 1);
279 }
280 }
281 #endif
282
283 if (mctrl & TIOCM_RTS)
284 control |= ATMEL_US_RTSEN;
285 else
286 control |= ATMEL_US_RTSDIS;
287
288 if (mctrl & TIOCM_DTR)
289 control |= ATMEL_US_DTREN;
290 else
291 control |= ATMEL_US_DTRDIS;
292
293 UART_PUT_CR(port, control);
294
295 /* Local loopback mode? */
296 mode = UART_GET_MR(port) & ~ATMEL_US_CHMODE;
297 if (mctrl & TIOCM_LOOP)
298 mode |= ATMEL_US_CHMODE_LOC_LOOP;
299 else
300 mode |= ATMEL_US_CHMODE_NORMAL;
301
302 /* Resetting serial mode to RS232 (0x0) */
303 mode &= ~ATMEL_US_USMODE;
304
305 if (atmel_port->rs485.flags & SER_RS485_ENABLED) {
306 dev_dbg(port->dev, "Setting UART to RS485\n");
307 if ((atmel_port->rs485.delay_rts_after_send) > 0)
308 UART_PUT_TTGR(port,
309 atmel_port->rs485.delay_rts_after_send);
310 mode |= ATMEL_US_USMODE_RS485;
311 } else {
312 dev_dbg(port->dev, "Setting UART to RS232\n");
313 }
314 UART_PUT_MR(port, mode);
315 }
316
317 /*
318 * Get state of the modem control input lines
319 */
320 static u_int atmel_get_mctrl(struct uart_port *port)
321 {
322 unsigned int status, ret = 0;
323
324 status = UART_GET_CSR(port);
325
326 /*
327 * The control signals are active low.
328 */
329 if (!(status & ATMEL_US_DCD))
330 ret |= TIOCM_CD;
331 if (!(status & ATMEL_US_CTS))
332 ret |= TIOCM_CTS;
333 if (!(status & ATMEL_US_DSR))
334 ret |= TIOCM_DSR;
335 if (!(status & ATMEL_US_RI))
336 ret |= TIOCM_RI;
337
338 return ret;
339 }
340
341 /*
342 * Stop transmitting.
343 */
344 static void atmel_stop_tx(struct uart_port *port)
345 {
346 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
347
348 if (atmel_use_dma_tx(port)) {
349 /* disable PDC transmit */
350 UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
351 }
352 /* Disable interrupts */
353 UART_PUT_IDR(port, atmel_port->tx_done_mask);
354
355 if ((atmel_port->rs485.flags & SER_RS485_ENABLED) &&
356 !(atmel_port->rs485.flags & SER_RS485_RX_DURING_TX))
357 atmel_start_rx(port);
358 }
359
360 /*
361 * Start transmitting.
362 */
363 static void atmel_start_tx(struct uart_port *port)
364 {
365 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
366
367 if (atmel_use_dma_tx(port)) {
368 if (UART_GET_PTSR(port) & ATMEL_PDC_TXTEN)
369 /* The transmitter is already running. Yes, we
370 really need this.*/
371 return;
372
373 if ((atmel_port->rs485.flags & SER_RS485_ENABLED) &&
374 !(atmel_port->rs485.flags & SER_RS485_RX_DURING_TX))
375 atmel_stop_rx(port);
376
377 /* re-enable PDC transmit */
378 UART_PUT_PTCR(port, ATMEL_PDC_TXTEN);
379 }
380 /* Enable interrupts */
381 UART_PUT_IER(port, atmel_port->tx_done_mask);
382 }
383
384 /*
385 * start receiving - port is in process of being opened.
386 */
387 static void atmel_start_rx(struct uart_port *port)
388 {
389 UART_PUT_CR(port, ATMEL_US_RSTSTA); /* reset status and receiver */
390
391 if (atmel_use_dma_rx(port)) {
392 /* enable PDC controller */
393 UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT |
394 port->read_status_mask);
395 UART_PUT_PTCR(port, ATMEL_PDC_RXTEN);
396 } else {
397 UART_PUT_IER(port, ATMEL_US_RXRDY);
398 }
399 }
400
401 /*
402 * Stop receiving - port is in process of being closed.
403 */
404 static void atmel_stop_rx(struct uart_port *port)
405 {
406 if (atmel_use_dma_rx(port)) {
407 /* disable PDC receive */
408 UART_PUT_PTCR(port, ATMEL_PDC_RXTDIS);
409 UART_PUT_IDR(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT |
410 port->read_status_mask);
411 } else {
412 UART_PUT_IDR(port, ATMEL_US_RXRDY);
413 }
414 }
415
416 /*
417 * Enable modem status interrupts
418 */
419 static void atmel_enable_ms(struct uart_port *port)
420 {
421 UART_PUT_IER(port, ATMEL_US_RIIC | ATMEL_US_DSRIC
422 | ATMEL_US_DCDIC | ATMEL_US_CTSIC);
423 }
424
425 /*
426 * Control the transmission of a break signal
427 */
428 static void atmel_break_ctl(struct uart_port *port, int break_state)
429 {
430 if (break_state != 0)
431 UART_PUT_CR(port, ATMEL_US_STTBRK); /* start break */
432 else
433 UART_PUT_CR(port, ATMEL_US_STPBRK); /* stop break */
434 }
435
436 /*
437 * Stores the incoming character in the ring buffer
438 */
439 static void
440 atmel_buffer_rx_char(struct uart_port *port, unsigned int status,
441 unsigned int ch)
442 {
443 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
444 struct circ_buf *ring = &atmel_port->rx_ring;
445 struct atmel_uart_char *c;
446
447 if (!CIRC_SPACE(ring->head, ring->tail, ATMEL_SERIAL_RINGSIZE))
448 /* Buffer overflow, ignore char */
449 return;
450
451 c = &((struct atmel_uart_char *)ring->buf)[ring->head];
452 c->status = status;
453 c->ch = ch;
454
455 /* Make sure the character is stored before we update head. */
456 smp_wmb();
457
458 ring->head = (ring->head + 1) & (ATMEL_SERIAL_RINGSIZE - 1);
459 }
460
461 /*
462 * Deal with parity, framing and overrun errors.
463 */
464 static void atmel_pdc_rxerr(struct uart_port *port, unsigned int status)
465 {
466 /* clear error */
467 UART_PUT_CR(port, ATMEL_US_RSTSTA);
468
469 if (status & ATMEL_US_RXBRK) {
470 /* ignore side-effect */
471 status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME);
472 port->icount.brk++;
473 }
474 if (status & ATMEL_US_PARE)
475 port->icount.parity++;
476 if (status & ATMEL_US_FRAME)
477 port->icount.frame++;
478 if (status & ATMEL_US_OVRE)
479 port->icount.overrun++;
480 }
481
482 /*
483 * Characters received (called from interrupt handler)
484 */
485 static void atmel_rx_chars(struct uart_port *port)
486 {
487 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
488 unsigned int status, ch;
489
490 status = UART_GET_CSR(port);
491 while (status & ATMEL_US_RXRDY) {
492 ch = UART_GET_CHAR(port);
493
494 /*
495 * note that the error handling code is
496 * out of the main execution path
497 */
498 if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME
499 | ATMEL_US_OVRE | ATMEL_US_RXBRK)
500 || atmel_port->break_active)) {
501
502 /* clear error */
503 UART_PUT_CR(port, ATMEL_US_RSTSTA);
504
505 if (status & ATMEL_US_RXBRK
506 && !atmel_port->break_active) {
507 atmel_port->break_active = 1;
508 UART_PUT_IER(port, ATMEL_US_RXBRK);
509 } else {
510 /*
511 * This is either the end-of-break
512 * condition or we've received at
513 * least one character without RXBRK
514 * being set. In both cases, the next
515 * RXBRK will indicate start-of-break.
516 */
517 UART_PUT_IDR(port, ATMEL_US_RXBRK);
518 status &= ~ATMEL_US_RXBRK;
519 atmel_port->break_active = 0;
520 }
521 }
522
523 atmel_buffer_rx_char(port, status, ch);
524 status = UART_GET_CSR(port);
525 }
526
527 tasklet_schedule(&atmel_port->tasklet);
528 }
529
530 /*
531 * Transmit characters (called from tasklet with TXRDY interrupt
532 * disabled)
533 */
534 static void atmel_tx_chars(struct uart_port *port)
535 {
536 struct circ_buf *xmit = &port->state->xmit;
537 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
538
539 if (port->x_char && UART_GET_CSR(port) & atmel_port->tx_done_mask) {
540 UART_PUT_CHAR(port, port->x_char);
541 port->icount.tx++;
542 port->x_char = 0;
543 }
544 if (uart_circ_empty(xmit) || uart_tx_stopped(port))
545 return;
546
547 while (UART_GET_CSR(port) & atmel_port->tx_done_mask) {
548 UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
549 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
550 port->icount.tx++;
551 if (uart_circ_empty(xmit))
552 break;
553 }
554
555 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
556 uart_write_wakeup(port);
557
558 if (!uart_circ_empty(xmit))
559 /* Enable interrupts */
560 UART_PUT_IER(port, atmel_port->tx_done_mask);
561 }
562
563 /*
564 * receive interrupt handler.
565 */
566 static void
567 atmel_handle_receive(struct uart_port *port, unsigned int pending)
568 {
569 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
570
571 if (atmel_use_dma_rx(port)) {
572 /*
573 * PDC receive. Just schedule the tasklet and let it
574 * figure out the details.
575 *
576 * TODO: We're not handling error flags correctly at
577 * the moment.
578 */
579 if (pending & (ATMEL_US_ENDRX | ATMEL_US_TIMEOUT)) {
580 UART_PUT_IDR(port, (ATMEL_US_ENDRX
581 | ATMEL_US_TIMEOUT));
582 tasklet_schedule(&atmel_port->tasklet);
583 }
584
585 if (pending & (ATMEL_US_RXBRK | ATMEL_US_OVRE |
586 ATMEL_US_FRAME | ATMEL_US_PARE))
587 atmel_pdc_rxerr(port, pending);
588 }
589
590 /* Interrupt receive */
591 if (pending & ATMEL_US_RXRDY)
592 atmel_rx_chars(port);
593 else if (pending & ATMEL_US_RXBRK) {
594 /*
595 * End of break detected. If it came along with a
596 * character, atmel_rx_chars will handle it.
597 */
598 UART_PUT_CR(port, ATMEL_US_RSTSTA);
599 UART_PUT_IDR(port, ATMEL_US_RXBRK);
600 atmel_port->break_active = 0;
601 }
602 }
603
604 /*
605 * transmit interrupt handler. (Transmit is IRQF_NODELAY safe)
606 */
607 static void
608 atmel_handle_transmit(struct uart_port *port, unsigned int pending)
609 {
610 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
611
612 if (pending & atmel_port->tx_done_mask) {
613 /* Either PDC or interrupt transmission */
614 UART_PUT_IDR(port, atmel_port->tx_done_mask);
615 tasklet_schedule(&atmel_port->tasklet);
616 }
617 }
618
619 /*
620 * status flags interrupt handler.
621 */
622 static void
623 atmel_handle_status(struct uart_port *port, unsigned int pending,
624 unsigned int status)
625 {
626 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
627
628 if (pending & (ATMEL_US_RIIC | ATMEL_US_DSRIC | ATMEL_US_DCDIC
629 | ATMEL_US_CTSIC)) {
630 atmel_port->irq_status = status;
631 tasklet_schedule(&atmel_port->tasklet);
632 }
633 }
634
635 /*
636 * Interrupt handler
637 */
638 static irqreturn_t atmel_interrupt(int irq, void *dev_id)
639 {
640 struct uart_port *port = dev_id;
641 unsigned int status, pending, pass_counter = 0;
642
643 do {
644 status = UART_GET_CSR(port);
645 pending = status & UART_GET_IMR(port);
646 if (!pending)
647 break;
648
649 atmel_handle_receive(port, pending);
650 atmel_handle_status(port, pending, status);
651 atmel_handle_transmit(port, pending);
652 } while (pass_counter++ < ATMEL_ISR_PASS_LIMIT);
653
654 return pass_counter ? IRQ_HANDLED : IRQ_NONE;
655 }
656
657 /*
658 * Called from tasklet with ENDTX and TXBUFE interrupts disabled.
659 */
660 static void atmel_tx_dma(struct uart_port *port)
661 {
662 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
663 struct circ_buf *xmit = &port->state->xmit;
664 struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
665 int count;
666
667 /* nothing left to transmit? */
668 if (UART_GET_TCR(port))
669 return;
670
671 xmit->tail += pdc->ofs;
672 xmit->tail &= UART_XMIT_SIZE - 1;
673
674 port->icount.tx += pdc->ofs;
675 pdc->ofs = 0;
676
677 /* more to transmit - setup next transfer */
678
679 /* disable PDC transmit */
680 UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
681
682 if (!uart_circ_empty(xmit) && !uart_tx_stopped(port)) {
683 dma_sync_single_for_device(port->dev,
684 pdc->dma_addr,
685 pdc->dma_size,
686 DMA_TO_DEVICE);
687
688 count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
689 pdc->ofs = count;
690
691 UART_PUT_TPR(port, pdc->dma_addr + xmit->tail);
692 UART_PUT_TCR(port, count);
693 /* re-enable PDC transmit */
694 UART_PUT_PTCR(port, ATMEL_PDC_TXTEN);
695 /* Enable interrupts */
696 UART_PUT_IER(port, atmel_port->tx_done_mask);
697 } else {
698 if ((atmel_port->rs485.flags & SER_RS485_ENABLED) &&
699 !(atmel_port->rs485.flags & SER_RS485_RX_DURING_TX)) {
700 /* DMA done, stop TX, start RX for RS485 */
701 atmel_start_rx(port);
702 }
703 }
704
705 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
706 uart_write_wakeup(port);
707 }
708
709 static void atmel_rx_from_ring(struct uart_port *port)
710 {
711 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
712 struct circ_buf *ring = &atmel_port->rx_ring;
713 unsigned int flg;
714 unsigned int status;
715
716 while (ring->head != ring->tail) {
717 struct atmel_uart_char c;
718
719 /* Make sure c is loaded after head. */
720 smp_rmb();
721
722 c = ((struct atmel_uart_char *)ring->buf)[ring->tail];
723
724 ring->tail = (ring->tail + 1) & (ATMEL_SERIAL_RINGSIZE - 1);
725
726 port->icount.rx++;
727 status = c.status;
728 flg = TTY_NORMAL;
729
730 /*
731 * note that the error handling code is
732 * out of the main execution path
733 */
734 if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME
735 | ATMEL_US_OVRE | ATMEL_US_RXBRK))) {
736 if (status & ATMEL_US_RXBRK) {
737 /* ignore side-effect */
738 status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME);
739
740 port->icount.brk++;
741 if (uart_handle_break(port))
742 continue;
743 }
744 if (status & ATMEL_US_PARE)
745 port->icount.parity++;
746 if (status & ATMEL_US_FRAME)
747 port->icount.frame++;
748 if (status & ATMEL_US_OVRE)
749 port->icount.overrun++;
750
751 status &= port->read_status_mask;
752
753 if (status & ATMEL_US_RXBRK)
754 flg = TTY_BREAK;
755 else if (status & ATMEL_US_PARE)
756 flg = TTY_PARITY;
757 else if (status & ATMEL_US_FRAME)
758 flg = TTY_FRAME;
759 }
760
761
762 if (uart_handle_sysrq_char(port, c.ch))
763 continue;
764
765 uart_insert_char(port, status, ATMEL_US_OVRE, c.ch, flg);
766 }
767
768 /*
769 * Drop the lock here since it might end up calling
770 * uart_start(), which takes the lock.
771 */
772 spin_unlock(&port->lock);
773 tty_flip_buffer_push(port->state->port.tty);
774 spin_lock(&port->lock);
775 }
776
777 static void atmel_rx_from_dma(struct uart_port *port)
778 {
779 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
780 struct tty_struct *tty = port->state->port.tty;
781 struct atmel_dma_buffer *pdc;
782 int rx_idx = atmel_port->pdc_rx_idx;
783 unsigned int head;
784 unsigned int tail;
785 unsigned int count;
786
787 do {
788 /* Reset the UART timeout early so that we don't miss one */
789 UART_PUT_CR(port, ATMEL_US_STTTO);
790
791 pdc = &atmel_port->pdc_rx[rx_idx];
792 head = UART_GET_RPR(port) - pdc->dma_addr;
793 tail = pdc->ofs;
794
795 /* If the PDC has switched buffers, RPR won't contain
796 * any address within the current buffer. Since head
797 * is unsigned, we just need a one-way comparison to
798 * find out.
799 *
800 * In this case, we just need to consume the entire
801 * buffer and resubmit it for DMA. This will clear the
802 * ENDRX bit as well, so that we can safely re-enable
803 * all interrupts below.
804 */
805 head = min(head, pdc->dma_size);
806
807 if (likely(head != tail)) {
808 dma_sync_single_for_cpu(port->dev, pdc->dma_addr,
809 pdc->dma_size, DMA_FROM_DEVICE);
810
811 /*
812 * head will only wrap around when we recycle
813 * the DMA buffer, and when that happens, we
814 * explicitly set tail to 0. So head will
815 * always be greater than tail.
816 */
817 count = head - tail;
818
819 tty_insert_flip_string(tty, pdc->buf + pdc->ofs, count);
820
821 dma_sync_single_for_device(port->dev, pdc->dma_addr,
822 pdc->dma_size, DMA_FROM_DEVICE);
823
824 port->icount.rx += count;
825 pdc->ofs = head;
826 }
827
828 /*
829 * If the current buffer is full, we need to check if
830 * the next one contains any additional data.
831 */
832 if (head >= pdc->dma_size) {
833 pdc->ofs = 0;
834 UART_PUT_RNPR(port, pdc->dma_addr);
835 UART_PUT_RNCR(port, pdc->dma_size);
836
837 rx_idx = !rx_idx;
838 atmel_port->pdc_rx_idx = rx_idx;
839 }
840 } while (head >= pdc->dma_size);
841
842 /*
843 * Drop the lock here since it might end up calling
844 * uart_start(), which takes the lock.
845 */
846 spin_unlock(&port->lock);
847 tty_flip_buffer_push(tty);
848 spin_lock(&port->lock);
849
850 UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
851 }
852
853 /*
854 * tasklet handling tty stuff outside the interrupt handler.
855 */
856 static void atmel_tasklet_func(unsigned long data)
857 {
858 struct uart_port *port = (struct uart_port *)data;
859 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
860 unsigned int status;
861 unsigned int status_change;
862
863 /* The interrupt handler does not take the lock */
864 spin_lock(&port->lock);
865
866 if (atmel_use_dma_tx(port))
867 atmel_tx_dma(port);
868 else
869 atmel_tx_chars(port);
870
871 status = atmel_port->irq_status;
872 status_change = status ^ atmel_port->irq_status_prev;
873
874 if (status_change & (ATMEL_US_RI | ATMEL_US_DSR
875 | ATMEL_US_DCD | ATMEL_US_CTS)) {
876 /* TODO: All reads to CSR will clear these interrupts! */
877 if (status_change & ATMEL_US_RI)
878 port->icount.rng++;
879 if (status_change & ATMEL_US_DSR)
880 port->icount.dsr++;
881 if (status_change & ATMEL_US_DCD)
882 uart_handle_dcd_change(port, !(status & ATMEL_US_DCD));
883 if (status_change & ATMEL_US_CTS)
884 uart_handle_cts_change(port, !(status & ATMEL_US_CTS));
885
886 wake_up_interruptible(&port->state->port.delta_msr_wait);
887
888 atmel_port->irq_status_prev = status;
889 }
890
891 if (atmel_use_dma_rx(port))
892 atmel_rx_from_dma(port);
893 else
894 atmel_rx_from_ring(port);
895
896 spin_unlock(&port->lock);
897 }
898
899 /*
900 * Perform initialization and enable port for reception
901 */
902 static int atmel_startup(struct uart_port *port)
903 {
904 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
905 struct tty_struct *tty = port->state->port.tty;
906 int retval;
907
908 /*
909 * Ensure that no interrupts are enabled otherwise when
910 * request_irq() is called we could get stuck trying to
911 * handle an unexpected interrupt
912 */
913 UART_PUT_IDR(port, -1);
914
915 /*
916 * Allocate the IRQ
917 */
918 retval = request_irq(port->irq, atmel_interrupt, IRQF_SHARED,
919 tty ? tty->name : "atmel_serial", port);
920 if (retval) {
921 printk("atmel_serial: atmel_startup - Can't get irq\n");
922 return retval;
923 }
924
925 /*
926 * Initialize DMA (if necessary)
927 */
928 if (atmel_use_dma_rx(port)) {
929 int i;
930
931 for (i = 0; i < 2; i++) {
932 struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i];
933
934 pdc->buf = kmalloc(PDC_BUFFER_SIZE, GFP_KERNEL);
935 if (pdc->buf == NULL) {
936 if (i != 0) {
937 dma_unmap_single(port->dev,
938 atmel_port->pdc_rx[0].dma_addr,
939 PDC_BUFFER_SIZE,
940 DMA_FROM_DEVICE);
941 kfree(atmel_port->pdc_rx[0].buf);
942 }
943 free_irq(port->irq, port);
944 return -ENOMEM;
945 }
946 pdc->dma_addr = dma_map_single(port->dev,
947 pdc->buf,
948 PDC_BUFFER_SIZE,
949 DMA_FROM_DEVICE);
950 pdc->dma_size = PDC_BUFFER_SIZE;
951 pdc->ofs = 0;
952 }
953
954 atmel_port->pdc_rx_idx = 0;
955
956 UART_PUT_RPR(port, atmel_port->pdc_rx[0].dma_addr);
957 UART_PUT_RCR(port, PDC_BUFFER_SIZE);
958
959 UART_PUT_RNPR(port, atmel_port->pdc_rx[1].dma_addr);
960 UART_PUT_RNCR(port, PDC_BUFFER_SIZE);
961 }
962 if (atmel_use_dma_tx(port)) {
963 struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
964 struct circ_buf *xmit = &port->state->xmit;
965
966 pdc->buf = xmit->buf;
967 pdc->dma_addr = dma_map_single(port->dev,
968 pdc->buf,
969 UART_XMIT_SIZE,
970 DMA_TO_DEVICE);
971 pdc->dma_size = UART_XMIT_SIZE;
972 pdc->ofs = 0;
973 }
974
975 /*
976 * If there is a specific "open" function (to register
977 * control line interrupts)
978 */
979 if (atmel_open_hook) {
980 retval = atmel_open_hook(port);
981 if (retval) {
982 free_irq(port->irq, port);
983 return retval;
984 }
985 }
986
987 /* Save current CSR for comparison in atmel_tasklet_func() */
988 atmel_port->irq_status_prev = UART_GET_CSR(port);
989 atmel_port->irq_status = atmel_port->irq_status_prev;
990
991 /*
992 * Finally, enable the serial port
993 */
994 UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
995 /* enable xmit & rcvr */
996 UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN);
997
998 if (atmel_use_dma_rx(port)) {
999 /* set UART timeout */
1000 UART_PUT_RTOR(port, PDC_RX_TIMEOUT);
1001 UART_PUT_CR(port, ATMEL_US_STTTO);
1002
1003 UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
1004 /* enable PDC controller */
1005 UART_PUT_PTCR(port, ATMEL_PDC_RXTEN);
1006 } else {
1007 /* enable receive only */
1008 UART_PUT_IER(port, ATMEL_US_RXRDY);
1009 }
1010
1011 return 0;
1012 }
1013
1014 /*
1015 * Disable the port
1016 */
1017 static void atmel_shutdown(struct uart_port *port)
1018 {
1019 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
1020 /*
1021 * Ensure everything is stopped.
1022 */
1023 atmel_stop_rx(port);
1024 atmel_stop_tx(port);
1025
1026 /*
1027 * Shut-down the DMA.
1028 */
1029 if (atmel_use_dma_rx(port)) {
1030 int i;
1031
1032 for (i = 0; i < 2; i++) {
1033 struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i];
1034
1035 dma_unmap_single(port->dev,
1036 pdc->dma_addr,
1037 pdc->dma_size,
1038 DMA_FROM_DEVICE);
1039 kfree(pdc->buf);
1040 }
1041 }
1042 if (atmel_use_dma_tx(port)) {
1043 struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
1044
1045 dma_unmap_single(port->dev,
1046 pdc->dma_addr,
1047 pdc->dma_size,
1048 DMA_TO_DEVICE);
1049 }
1050
1051 /*
1052 * Disable all interrupts, port and break condition.
1053 */
1054 UART_PUT_CR(port, ATMEL_US_RSTSTA);
1055 UART_PUT_IDR(port, -1);
1056
1057 /*
1058 * Free the interrupt
1059 */
1060 free_irq(port->irq, port);
1061
1062 /*
1063 * If there is a specific "close" function (to unregister
1064 * control line interrupts)
1065 */
1066 if (atmel_close_hook)
1067 atmel_close_hook(port);
1068 }
1069
1070 /*
1071 * Flush any TX data submitted for DMA. Called when the TX circular
1072 * buffer is reset.
1073 */
1074 static void atmel_flush_buffer(struct uart_port *port)
1075 {
1076 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
1077
1078 if (atmel_use_dma_tx(port)) {
1079 UART_PUT_TCR(port, 0);
1080 atmel_port->pdc_tx.ofs = 0;
1081 }
1082 }
1083
1084 /*
1085 * Power / Clock management.
1086 */
1087 static void atmel_serial_pm(struct uart_port *port, unsigned int state,
1088 unsigned int oldstate)
1089 {
1090 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
1091
1092 switch (state) {
1093 case 0:
1094 /*
1095 * Enable the peripheral clock for this serial port.
1096 * This is called on uart_open() or a resume event.
1097 */
1098 clk_enable(atmel_port->clk);
1099
1100 /* re-enable interrupts if we disabled some on suspend */
1101 UART_PUT_IER(port, atmel_port->backup_imr);
1102 break;
1103 case 3:
1104 /* Back up the interrupt mask and disable all interrupts */
1105 atmel_port->backup_imr = UART_GET_IMR(port);
1106 UART_PUT_IDR(port, -1);
1107
1108 /*
1109 * Disable the peripheral clock for this serial port.
1110 * This is called on uart_close() or a suspend event.
1111 */
1112 clk_disable(atmel_port->clk);
1113 break;
1114 default:
1115 printk(KERN_ERR "atmel_serial: unknown pm %d\n", state);
1116 }
1117 }
1118
1119 /*
1120 * Change the port parameters
1121 */
1122 static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
1123 struct ktermios *old)
1124 {
1125 unsigned long flags;
1126 unsigned int mode, imr, quot, baud;
1127 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
1128
1129 /* Get current mode register */
1130 mode = UART_GET_MR(port) & ~(ATMEL_US_USCLKS | ATMEL_US_CHRL
1131 | ATMEL_US_NBSTOP | ATMEL_US_PAR
1132 | ATMEL_US_USMODE);
1133
1134 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
1135 quot = uart_get_divisor(port, baud);
1136
1137 if (quot > 65535) { /* BRGR is 16-bit, so switch to slower clock */
1138 quot /= 8;
1139 mode |= ATMEL_US_USCLKS_MCK_DIV8;
1140 }
1141
1142 /* byte size */
1143 switch (termios->c_cflag & CSIZE) {
1144 case CS5:
1145 mode |= ATMEL_US_CHRL_5;
1146 break;
1147 case CS6:
1148 mode |= ATMEL_US_CHRL_6;
1149 break;
1150 case CS7:
1151 mode |= ATMEL_US_CHRL_7;
1152 break;
1153 default:
1154 mode |= ATMEL_US_CHRL_8;
1155 break;
1156 }
1157
1158 /* stop bits */
1159 if (termios->c_cflag & CSTOPB)
1160 mode |= ATMEL_US_NBSTOP_2;
1161
1162 /* parity */
1163 if (termios->c_cflag & PARENB) {
1164 /* Mark or Space parity */
1165 if (termios->c_cflag & CMSPAR) {
1166 if (termios->c_cflag & PARODD)
1167 mode |= ATMEL_US_PAR_MARK;
1168 else
1169 mode |= ATMEL_US_PAR_SPACE;
1170 } else if (termios->c_cflag & PARODD)
1171 mode |= ATMEL_US_PAR_ODD;
1172 else
1173 mode |= ATMEL_US_PAR_EVEN;
1174 } else
1175 mode |= ATMEL_US_PAR_NONE;
1176
1177 /* hardware handshake (RTS/CTS) */
1178 if (termios->c_cflag & CRTSCTS)
1179 mode |= ATMEL_US_USMODE_HWHS;
1180 else
1181 mode |= ATMEL_US_USMODE_NORMAL;
1182
1183 spin_lock_irqsave(&port->lock, flags);
1184
1185 port->read_status_mask = ATMEL_US_OVRE;
1186 if (termios->c_iflag & INPCK)
1187 port->read_status_mask |= (ATMEL_US_FRAME | ATMEL_US_PARE);
1188 if (termios->c_iflag & (BRKINT | PARMRK))
1189 port->read_status_mask |= ATMEL_US_RXBRK;
1190
1191 if (atmel_use_dma_rx(port))
1192 /* need to enable error interrupts */
1193 UART_PUT_IER(port, port->read_status_mask);
1194
1195 /*
1196 * Characters to ignore
1197 */
1198 port->ignore_status_mask = 0;
1199 if (termios->c_iflag & IGNPAR)
1200 port->ignore_status_mask |= (ATMEL_US_FRAME | ATMEL_US_PARE);
1201 if (termios->c_iflag & IGNBRK) {
1202 port->ignore_status_mask |= ATMEL_US_RXBRK;
1203 /*
1204 * If we're ignoring parity and break indicators,
1205 * ignore overruns too (for real raw support).
1206 */
1207 if (termios->c_iflag & IGNPAR)
1208 port->ignore_status_mask |= ATMEL_US_OVRE;
1209 }
1210 /* TODO: Ignore all characters if CREAD is set.*/
1211
1212 /* update the per-port timeout */
1213 uart_update_timeout(port, termios->c_cflag, baud);
1214
1215 /*
1216 * save/disable interrupts. The tty layer will ensure that the
1217 * transmitter is empty if requested by the caller, so there's
1218 * no need to wait for it here.
1219 */
1220 imr = UART_GET_IMR(port);
1221 UART_PUT_IDR(port, -1);
1222
1223 /* disable receiver and transmitter */
1224 UART_PUT_CR(port, ATMEL_US_TXDIS | ATMEL_US_RXDIS);
1225
1226 /* Resetting serial mode to RS232 (0x0) */
1227 mode &= ~ATMEL_US_USMODE;
1228
1229 if (atmel_port->rs485.flags & SER_RS485_ENABLED) {
1230 dev_dbg(port->dev, "Setting UART to RS485\n");
1231 if ((atmel_port->rs485.delay_rts_after_send) > 0)
1232 UART_PUT_TTGR(port,
1233 atmel_port->rs485.delay_rts_after_send);
1234 mode |= ATMEL_US_USMODE_RS485;
1235 } else {
1236 dev_dbg(port->dev, "Setting UART to RS232\n");
1237 }
1238
1239 /* set the parity, stop bits and data size */
1240 UART_PUT_MR(port, mode);
1241
1242 /* set the baud rate */
1243 UART_PUT_BRGR(port, quot);
1244 UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
1245 UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN);
1246
1247 /* restore interrupts */
1248 UART_PUT_IER(port, imr);
1249
1250 /* CTS flow-control and modem-status interrupts */
1251 if (UART_ENABLE_MS(port, termios->c_cflag))
1252 port->ops->enable_ms(port);
1253
1254 spin_unlock_irqrestore(&port->lock, flags);
1255 }
1256
1257 static void atmel_set_ldisc(struct uart_port *port, int new)
1258 {
1259 if (new == N_PPS) {
1260 port->flags |= UPF_HARDPPS_CD;
1261 atmel_enable_ms(port);
1262 } else {
1263 port->flags &= ~UPF_HARDPPS_CD;
1264 }
1265 }
1266
1267 /*
1268 * Return string describing the specified port
1269 */
1270 static const char *atmel_type(struct uart_port *port)
1271 {
1272 return (port->type == PORT_ATMEL) ? "ATMEL_SERIAL" : NULL;
1273 }
1274
1275 /*
1276 * Release the memory region(s) being used by 'port'.
1277 */
1278 static void atmel_release_port(struct uart_port *port)
1279 {
1280 struct platform_device *pdev = to_platform_device(port->dev);
1281 int size = pdev->resource[0].end - pdev->resource[0].start + 1;
1282
1283 release_mem_region(port->mapbase, size);
1284
1285 if (port->flags & UPF_IOREMAP) {
1286 iounmap(port->membase);
1287 port->membase = NULL;
1288 }
1289 }
1290
1291 /*
1292 * Request the memory region(s) being used by 'port'.
1293 */
1294 static int atmel_request_port(struct uart_port *port)
1295 {
1296 struct platform_device *pdev = to_platform_device(port->dev);
1297 int size = pdev->resource[0].end - pdev->resource[0].start + 1;
1298
1299 if (!request_mem_region(port->mapbase, size, "atmel_serial"))
1300 return -EBUSY;
1301
1302 if (port->flags & UPF_IOREMAP) {
1303 port->membase = ioremap(port->mapbase, size);
1304 if (port->membase == NULL) {
1305 release_mem_region(port->mapbase, size);
1306 return -ENOMEM;
1307 }
1308 }
1309
1310 return 0;
1311 }
1312
1313 /*
1314 * Configure/autoconfigure the port.
1315 */
1316 static void atmel_config_port(struct uart_port *port, int flags)
1317 {
1318 if (flags & UART_CONFIG_TYPE) {
1319 port->type = PORT_ATMEL;
1320 atmel_request_port(port);
1321 }
1322 }
1323
1324 /*
1325 * Verify the new serial_struct (for TIOCSSERIAL).
1326 */
1327 static int atmel_verify_port(struct uart_port *port, struct serial_struct *ser)
1328 {
1329 int ret = 0;
1330 if (ser->type != PORT_UNKNOWN && ser->type != PORT_ATMEL)
1331 ret = -EINVAL;
1332 if (port->irq != ser->irq)
1333 ret = -EINVAL;
1334 if (ser->io_type != SERIAL_IO_MEM)
1335 ret = -EINVAL;
1336 if (port->uartclk / 16 != ser->baud_base)
1337 ret = -EINVAL;
1338 if ((void *)port->mapbase != ser->iomem_base)
1339 ret = -EINVAL;
1340 if (port->iobase != ser->port)
1341 ret = -EINVAL;
1342 if (ser->hub6 != 0)
1343 ret = -EINVAL;
1344 return ret;
1345 }
1346
1347 #ifdef CONFIG_CONSOLE_POLL
1348 static int atmel_poll_get_char(struct uart_port *port)
1349 {
1350 while (!(UART_GET_CSR(port) & ATMEL_US_RXRDY))
1351 cpu_relax();
1352
1353 return UART_GET_CHAR(port);
1354 }
1355
1356 static void atmel_poll_put_char(struct uart_port *port, unsigned char ch)
1357 {
1358 while (!(UART_GET_CSR(port) & ATMEL_US_TXRDY))
1359 cpu_relax();
1360
1361 UART_PUT_CHAR(port, ch);
1362 }
1363 #endif
1364
1365 static int
1366 atmel_ioctl(struct uart_port *port, unsigned int cmd, unsigned long arg)
1367 {
1368 struct serial_rs485 rs485conf;
1369
1370 switch (cmd) {
1371 case TIOCSRS485:
1372 if (copy_from_user(&rs485conf, (struct serial_rs485 *) arg,
1373 sizeof(rs485conf)))
1374 return -EFAULT;
1375
1376 atmel_config_rs485(port, &rs485conf);
1377 break;
1378
1379 case TIOCGRS485:
1380 if (copy_to_user((struct serial_rs485 *) arg,
1381 &(to_atmel_uart_port(port)->rs485),
1382 sizeof(rs485conf)))
1383 return -EFAULT;
1384 break;
1385
1386 default:
1387 return -ENOIOCTLCMD;
1388 }
1389 return 0;
1390 }
1391
1392
1393
1394 static struct uart_ops atmel_pops = {
1395 .tx_empty = atmel_tx_empty,
1396 .set_mctrl = atmel_set_mctrl,
1397 .get_mctrl = atmel_get_mctrl,
1398 .stop_tx = atmel_stop_tx,
1399 .start_tx = atmel_start_tx,
1400 .stop_rx = atmel_stop_rx,
1401 .enable_ms = atmel_enable_ms,
1402 .break_ctl = atmel_break_ctl,
1403 .startup = atmel_startup,
1404 .shutdown = atmel_shutdown,
1405 .flush_buffer = atmel_flush_buffer,
1406 .set_termios = atmel_set_termios,
1407 .set_ldisc = atmel_set_ldisc,
1408 .type = atmel_type,
1409 .release_port = atmel_release_port,
1410 .request_port = atmel_request_port,
1411 .config_port = atmel_config_port,
1412 .verify_port = atmel_verify_port,
1413 .pm = atmel_serial_pm,
1414 .ioctl = atmel_ioctl,
1415 #ifdef CONFIG_CONSOLE_POLL
1416 .poll_get_char = atmel_poll_get_char,
1417 .poll_put_char = atmel_poll_put_char,
1418 #endif
1419 };
1420
1421 static void __devinit atmel_of_init_port(struct atmel_uart_port *atmel_port,
1422 struct device_node *np)
1423 {
1424 u32 rs485_delay[2];
1425
1426 /* DMA/PDC usage specification */
1427 if (of_get_property(np, "atmel,use-dma-rx", NULL))
1428 atmel_port->use_dma_rx = 1;
1429 else
1430 atmel_port->use_dma_rx = 0;
1431 if (of_get_property(np, "atmel,use-dma-tx", NULL))
1432 atmel_port->use_dma_tx = 1;
1433 else
1434 atmel_port->use_dma_tx = 0;
1435
1436 /* rs485 properties */
1437 if (of_property_read_u32_array(np, "rs485-rts-delay",
1438 rs485_delay, 2) == 0) {
1439 struct serial_rs485 *rs485conf = &atmel_port->rs485;
1440
1441 rs485conf->delay_rts_before_send = rs485_delay[0];
1442 rs485conf->delay_rts_after_send = rs485_delay[1];
1443 rs485conf->flags = 0;
1444
1445 if (of_get_property(np, "rs485-rx-during-tx", NULL))
1446 rs485conf->flags |= SER_RS485_RX_DURING_TX;
1447
1448 if (of_get_property(np, "linux,rs485-enabled-at-boot-time", NULL))
1449 rs485conf->flags |= SER_RS485_ENABLED;
1450 }
1451 }
1452
1453 /*
1454 * Configure the port from the platform device resource info.
1455 */
1456 static void __devinit atmel_init_port(struct atmel_uart_port *atmel_port,
1457 struct platform_device *pdev)
1458 {
1459 struct uart_port *port = &atmel_port->uart;
1460 struct atmel_uart_data *pdata = pdev->dev.platform_data;
1461
1462 if (pdev->dev.of_node) {
1463 atmel_of_init_port(atmel_port, pdev->dev.of_node);
1464 } else {
1465 atmel_port->use_dma_rx = pdata->use_dma_rx;
1466 atmel_port->use_dma_tx = pdata->use_dma_tx;
1467 atmel_port->rs485 = pdata->rs485;
1468 }
1469
1470 port->iotype = UPIO_MEM;
1471 port->flags = UPF_BOOT_AUTOCONF;
1472 port->ops = &atmel_pops;
1473 port->fifosize = 1;
1474 port->dev = &pdev->dev;
1475 port->mapbase = pdev->resource[0].start;
1476 port->irq = pdev->resource[1].start;
1477
1478 tasklet_init(&atmel_port->tasklet, atmel_tasklet_func,
1479 (unsigned long)port);
1480
1481 memset(&atmel_port->rx_ring, 0, sizeof(atmel_port->rx_ring));
1482
1483 if (pdata && pdata->regs) {
1484 /* Already mapped by setup code */
1485 port->membase = pdata->regs;
1486 } else {
1487 port->flags |= UPF_IOREMAP;
1488 port->membase = NULL;
1489 }
1490
1491 /* for console, the clock could already be configured */
1492 if (!atmel_port->clk) {
1493 atmel_port->clk = clk_get(&pdev->dev, "usart");
1494 clk_enable(atmel_port->clk);
1495 port->uartclk = clk_get_rate(atmel_port->clk);
1496 clk_disable(atmel_port->clk);
1497 /* only enable clock when USART is in use */
1498 }
1499
1500 /* Use TXEMPTY for interrupt when rs485 else TXRDY or ENDTX|TXBUFE */
1501 if (atmel_port->rs485.flags & SER_RS485_ENABLED)
1502 atmel_port->tx_done_mask = ATMEL_US_TXEMPTY;
1503 else if (atmel_use_dma_tx(port)) {
1504 port->fifosize = PDC_BUFFER_SIZE;
1505 atmel_port->tx_done_mask = ATMEL_US_ENDTX | ATMEL_US_TXBUFE;
1506 } else {
1507 atmel_port->tx_done_mask = ATMEL_US_TXRDY;
1508 }
1509 }
1510
1511 /*
1512 * Register board-specific modem-control line handlers.
1513 */
1514 void __init atmel_register_uart_fns(struct atmel_port_fns *fns)
1515 {
1516 if (fns->enable_ms)
1517 atmel_pops.enable_ms = fns->enable_ms;
1518 if (fns->get_mctrl)
1519 atmel_pops.get_mctrl = fns->get_mctrl;
1520 if (fns->set_mctrl)
1521 atmel_pops.set_mctrl = fns->set_mctrl;
1522 atmel_open_hook = fns->open;
1523 atmel_close_hook = fns->close;
1524 atmel_pops.pm = fns->pm;
1525 atmel_pops.set_wake = fns->set_wake;
1526 }
1527
1528 #ifdef CONFIG_SERIAL_ATMEL_CONSOLE
1529 static void atmel_console_putchar(struct uart_port *port, int ch)
1530 {
1531 while (!(UART_GET_CSR(port) & ATMEL_US_TXRDY))
1532 cpu_relax();
1533 UART_PUT_CHAR(port, ch);
1534 }
1535
1536 /*
1537 * Interrupts are disabled on entering
1538 */
1539 static void atmel_console_write(struct console *co, const char *s, u_int count)
1540 {
1541 struct uart_port *port = &atmel_ports[co->index].uart;
1542 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
1543 unsigned int status, imr;
1544 unsigned int pdc_tx;
1545
1546 /*
1547 * First, save IMR and then disable interrupts
1548 */
1549 imr = UART_GET_IMR(port);
1550 UART_PUT_IDR(port, ATMEL_US_RXRDY | atmel_port->tx_done_mask);
1551
1552 /* Store PDC transmit status and disable it */
1553 pdc_tx = UART_GET_PTSR(port) & ATMEL_PDC_TXTEN;
1554 UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
1555
1556 uart_console_write(port, s, count, atmel_console_putchar);
1557
1558 /*
1559 * Finally, wait for transmitter to become empty
1560 * and restore IMR
1561 */
1562 do {
1563 status = UART_GET_CSR(port);
1564 } while (!(status & ATMEL_US_TXRDY));
1565
1566 /* Restore PDC transmit status */
1567 if (pdc_tx)
1568 UART_PUT_PTCR(port, ATMEL_PDC_TXTEN);
1569
1570 /* set interrupts back the way they were */
1571 UART_PUT_IER(port, imr);
1572 }
1573
1574 /*
1575 * If the port was already initialised (eg, by a boot loader),
1576 * try to determine the current setup.
1577 */
1578 static void __init atmel_console_get_options(struct uart_port *port, int *baud,
1579 int *parity, int *bits)
1580 {
1581 unsigned int mr, quot;
1582
1583 /*
1584 * If the baud rate generator isn't running, the port wasn't
1585 * initialized by the boot loader.
1586 */
1587 quot = UART_GET_BRGR(port) & ATMEL_US_CD;
1588 if (!quot)
1589 return;
1590
1591 mr = UART_GET_MR(port) & ATMEL_US_CHRL;
1592 if (mr == ATMEL_US_CHRL_8)
1593 *bits = 8;
1594 else
1595 *bits = 7;
1596
1597 mr = UART_GET_MR(port) & ATMEL_US_PAR;
1598 if (mr == ATMEL_US_PAR_EVEN)
1599 *parity = 'e';
1600 else if (mr == ATMEL_US_PAR_ODD)
1601 *parity = 'o';
1602
1603 /*
1604 * The serial core only rounds down when matching this to a
1605 * supported baud rate. Make sure we don't end up slightly
1606 * lower than one of those, as it would make us fall through
1607 * to a much lower baud rate than we really want.
1608 */
1609 *baud = port->uartclk / (16 * (quot - 1));
1610 }
1611
1612 static int __init atmel_console_setup(struct console *co, char *options)
1613 {
1614 struct uart_port *port = &atmel_ports[co->index].uart;
1615 int baud = 115200;
1616 int bits = 8;
1617 int parity = 'n';
1618 int flow = 'n';
1619
1620 if (port->membase == NULL) {
1621 /* Port not initialized yet - delay setup */
1622 return -ENODEV;
1623 }
1624
1625 clk_enable(atmel_ports[co->index].clk);
1626
1627 UART_PUT_IDR(port, -1);
1628 UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
1629 UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN);
1630
1631 if (options)
1632 uart_parse_options(options, &baud, &parity, &bits, &flow);
1633 else
1634 atmel_console_get_options(port, &baud, &parity, &bits);
1635
1636 return uart_set_options(port, co, baud, parity, bits, flow);
1637 }
1638
1639 static struct uart_driver atmel_uart;
1640
1641 static struct console atmel_console = {
1642 .name = ATMEL_DEVICENAME,
1643 .write = atmel_console_write,
1644 .device = uart_console_device,
1645 .setup = atmel_console_setup,
1646 .flags = CON_PRINTBUFFER,
1647 .index = -1,
1648 .data = &atmel_uart,
1649 };
1650
1651 #define ATMEL_CONSOLE_DEVICE (&atmel_console)
1652
1653 /*
1654 * Early console initialization (before VM subsystem initialized).
1655 */
1656 static int __init atmel_console_init(void)
1657 {
1658 if (atmel_default_console_device) {
1659 struct atmel_uart_data *pdata =
1660 atmel_default_console_device->dev.platform_data;
1661 int id = pdata->num;
1662 struct atmel_uart_port *port = &atmel_ports[id];
1663
1664 port->backup_imr = 0;
1665 port->uart.line = id;
1666
1667 add_preferred_console(ATMEL_DEVICENAME, id, NULL);
1668 atmel_init_port(port, atmel_default_console_device);
1669 register_console(&atmel_console);
1670 }
1671
1672 return 0;
1673 }
1674
1675 console_initcall(atmel_console_init);
1676
1677 /*
1678 * Late console initialization.
1679 */
1680 static int __init atmel_late_console_init(void)
1681 {
1682 if (atmel_default_console_device
1683 && !(atmel_console.flags & CON_ENABLED))
1684 register_console(&atmel_console);
1685
1686 return 0;
1687 }
1688
1689 core_initcall(atmel_late_console_init);
1690
1691 static inline bool atmel_is_console_port(struct uart_port *port)
1692 {
1693 return port->cons && port->cons->index == port->line;
1694 }
1695
1696 #else
1697 #define ATMEL_CONSOLE_DEVICE NULL
1698
1699 static inline bool atmel_is_console_port(struct uart_port *port)
1700 {
1701 return false;
1702 }
1703 #endif
1704
1705 static struct uart_driver atmel_uart = {
1706 .owner = THIS_MODULE,
1707 .driver_name = "atmel_serial",
1708 .dev_name = ATMEL_DEVICENAME,
1709 .major = SERIAL_ATMEL_MAJOR,
1710 .minor = MINOR_START,
1711 .nr = ATMEL_MAX_UART,
1712 .cons = ATMEL_CONSOLE_DEVICE,
1713 };
1714
1715 #ifdef CONFIG_PM
1716 static bool atmel_serial_clk_will_stop(void)
1717 {
1718 #ifdef CONFIG_ARCH_AT91
1719 return at91_suspend_entering_slow_clock();
1720 #else
1721 return false;
1722 #endif
1723 }
1724
1725 static int atmel_serial_suspend(struct platform_device *pdev,
1726 pm_message_t state)
1727 {
1728 struct uart_port *port = platform_get_drvdata(pdev);
1729 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
1730
1731 if (atmel_is_console_port(port) && console_suspend_enabled) {
1732 /* Drain the TX shifter */
1733 while (!(UART_GET_CSR(port) & ATMEL_US_TXEMPTY))
1734 cpu_relax();
1735 }
1736
1737 /* we can not wake up if we're running on slow clock */
1738 atmel_port->may_wakeup = device_may_wakeup(&pdev->dev);
1739 if (atmel_serial_clk_will_stop())
1740 device_set_wakeup_enable(&pdev->dev, 0);
1741
1742 uart_suspend_port(&atmel_uart, port);
1743
1744 return 0;
1745 }
1746
1747 static int atmel_serial_resume(struct platform_device *pdev)
1748 {
1749 struct uart_port *port = platform_get_drvdata(pdev);
1750 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
1751
1752 uart_resume_port(&atmel_uart, port);
1753 device_set_wakeup_enable(&pdev->dev, atmel_port->may_wakeup);
1754
1755 return 0;
1756 }
1757 #else
1758 #define atmel_serial_suspend NULL
1759 #define atmel_serial_resume NULL
1760 #endif
1761
1762 static int __devinit atmel_serial_probe(struct platform_device *pdev)
1763 {
1764 struct atmel_uart_port *port;
1765 struct device_node *np = pdev->dev.of_node;
1766 struct atmel_uart_data *pdata = pdev->dev.platform_data;
1767 void *data;
1768 int ret = -ENODEV;
1769
1770 BUILD_BUG_ON(ATMEL_SERIAL_RINGSIZE & (ATMEL_SERIAL_RINGSIZE - 1));
1771
1772 if (np)
1773 ret = of_alias_get_id(np, "serial");
1774 else
1775 if (pdata)
1776 ret = pdata->num;
1777
1778 if (ret < 0)
1779 /* port id not found in platform data nor device-tree aliases:
1780 * auto-enumerate it */
1781 ret = find_first_zero_bit(&atmel_ports_in_use,
1782 sizeof(atmel_ports_in_use));
1783
1784 if (ret > ATMEL_MAX_UART) {
1785 ret = -ENODEV;
1786 goto err;
1787 }
1788
1789 if (test_and_set_bit(ret, &atmel_ports_in_use)) {
1790 /* port already in use */
1791 ret = -EBUSY;
1792 goto err;
1793 }
1794
1795 port = &atmel_ports[ret];
1796 port->backup_imr = 0;
1797 port->uart.line = ret;
1798
1799 atmel_init_port(port, pdev);
1800
1801 if (!atmel_use_dma_rx(&port->uart)) {
1802 ret = -ENOMEM;
1803 data = kmalloc(sizeof(struct atmel_uart_char)
1804 * ATMEL_SERIAL_RINGSIZE, GFP_KERNEL);
1805 if (!data)
1806 goto err_alloc_ring;
1807 port->rx_ring.buf = data;
1808 }
1809
1810 ret = uart_add_one_port(&atmel_uart, &port->uart);
1811 if (ret)
1812 goto err_add_port;
1813
1814 #ifdef CONFIG_SERIAL_ATMEL_CONSOLE
1815 if (atmel_is_console_port(&port->uart)
1816 && ATMEL_CONSOLE_DEVICE->flags & CON_ENABLED) {
1817 /*
1818 * The serial core enabled the clock for us, so undo
1819 * the clk_enable() in atmel_console_setup()
1820 */
1821 clk_disable(port->clk);
1822 }
1823 #endif
1824
1825 device_init_wakeup(&pdev->dev, 1);
1826 platform_set_drvdata(pdev, port);
1827
1828 if (port->rs485.flags & SER_RS485_ENABLED) {
1829 UART_PUT_MR(&port->uart, ATMEL_US_USMODE_NORMAL);
1830 UART_PUT_CR(&port->uart, ATMEL_US_RTSEN);
1831 }
1832
1833 return 0;
1834
1835 err_add_port:
1836 kfree(port->rx_ring.buf);
1837 port->rx_ring.buf = NULL;
1838 err_alloc_ring:
1839 if (!atmel_is_console_port(&port->uart)) {
1840 clk_put(port->clk);
1841 port->clk = NULL;
1842 }
1843 err:
1844 return ret;
1845 }
1846
1847 static int __devexit atmel_serial_remove(struct platform_device *pdev)
1848 {
1849 struct uart_port *port = platform_get_drvdata(pdev);
1850 struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
1851 int ret = 0;
1852
1853 device_init_wakeup(&pdev->dev, 0);
1854 platform_set_drvdata(pdev, NULL);
1855
1856 ret = uart_remove_one_port(&atmel_uart, port);
1857
1858 tasklet_kill(&atmel_port->tasklet);
1859 kfree(atmel_port->rx_ring.buf);
1860
1861 /* "port" is allocated statically, so we shouldn't free it */
1862
1863 clear_bit(port->line, &atmel_ports_in_use);
1864
1865 clk_put(atmel_port->clk);
1866
1867 return ret;
1868 }
1869
1870 static struct platform_driver atmel_serial_driver = {
1871 .probe = atmel_serial_probe,
1872 .remove = __devexit_p(atmel_serial_remove),
1873 .suspend = atmel_serial_suspend,
1874 .resume = atmel_serial_resume,
1875 .driver = {
1876 .name = "atmel_usart",
1877 .owner = THIS_MODULE,
1878 .of_match_table = of_match_ptr(atmel_serial_dt_ids),
1879 },
1880 };
1881
1882 static int __init atmel_serial_init(void)
1883 {
1884 int ret;
1885
1886 ret = uart_register_driver(&atmel_uart);
1887 if (ret)
1888 return ret;
1889
1890 ret = platform_driver_register(&atmel_serial_driver);
1891 if (ret)
1892 uart_unregister_driver(&atmel_uart);
1893
1894 return ret;
1895 }
1896
1897 static void __exit atmel_serial_exit(void)
1898 {
1899 platform_driver_unregister(&atmel_serial_driver);
1900 uart_unregister_driver(&atmel_uart);
1901 }
1902
1903 module_init(atmel_serial_init);
1904 module_exit(atmel_serial_exit);
1905
1906 MODULE_AUTHOR("Rick Bronson");
1907 MODULE_DESCRIPTION("Atmel AT91 / AT32 serial port driver");
1908 MODULE_LICENSE("GPL");
1909 MODULE_ALIAS("platform:atmel_usart");
Linux kernel - Deliverables
This page took 0.067394 seconds and 4 git commands to generate.