2 * Driver for Motorola IMX serial ports
4 * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
6 * Author: Sascha Hauer <sascha@saschahauer.de>
7 * Copyright (C) 2004 Pengutronix
9 * Copyright (C) 2009 emlix GmbH
10 * Author: Fabian Godehardt (added IrDA support for iMX)
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License as published by
14 * the Free Software Foundation; either version 2 of the License, or
15 * (at your option) any later version.
17 * This program is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 * GNU General Public License for more details.
22 * You should have received a copy of the GNU General Public License
23 * along with this program; if not, write to the Free Software
24 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
26 * [29-Mar-2005] Mike Lee
27 * Added hardware handshake
30 #if defined(CONFIG_SERIAL_IMX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
34 #include <linux/module.h>
35 #include <linux/ioport.h>
36 #include <linux/init.h>
37 #include <linux/console.h>
38 #include <linux/sysrq.h>
39 #include <linux/platform_device.h>
40 #include <linux/tty.h>
41 #include <linux/tty_flip.h>
42 #include <linux/serial_core.h>
43 #include <linux/serial.h>
44 #include <linux/clk.h>
45 #include <linux/delay.h>
46 #include <linux/rational.h>
47 #include <linux/slab.h>
49 #include <linux/of_device.h>
50 #include <linux/pinctrl/consumer.h>
54 #include <mach/imx-uart.h>
56 /* Register definitions */
57 #define URXD0 0x0 /* Receiver Register */
58 #define URTX0 0x40 /* Transmitter Register */
59 #define UCR1 0x80 /* Control Register 1 */
60 #define UCR2 0x84 /* Control Register 2 */
61 #define UCR3 0x88 /* Control Register 3 */
62 #define UCR4 0x8c /* Control Register 4 */
63 #define UFCR 0x90 /* FIFO Control Register */
64 #define USR1 0x94 /* Status Register 1 */
65 #define USR2 0x98 /* Status Register 2 */
66 #define UESC 0x9c /* Escape Character Register */
67 #define UTIM 0xa0 /* Escape Timer Register */
68 #define UBIR 0xa4 /* BRM Incremental Register */
69 #define UBMR 0xa8 /* BRM Modulator Register */
70 #define UBRC 0xac /* Baud Rate Count Register */
71 #define IMX21_ONEMS 0xb0 /* One Millisecond register */
72 #define IMX1_UTS 0xd0 /* UART Test Register on i.mx1 */
73 #define IMX21_UTS 0xb4 /* UART Test Register on all other i.mx*/
75 /* UART Control Register Bit Fields.*/
76 #define URXD_CHARRDY (1<<15)
77 #define URXD_ERR (1<<14)
78 #define URXD_OVRRUN (1<<13)
79 #define URXD_FRMERR (1<<12)
80 #define URXD_BRK (1<<11)
81 #define URXD_PRERR (1<<10)
82 #define UCR1_ADEN (1<<15) /* Auto detect interrupt */
83 #define UCR1_ADBR (1<<14) /* Auto detect baud rate */
84 #define UCR1_TRDYEN (1<<13) /* Transmitter ready interrupt enable */
85 #define UCR1_IDEN (1<<12) /* Idle condition interrupt */
86 #define UCR1_RRDYEN (1<<9) /* Recv ready interrupt enable */
87 #define UCR1_RDMAEN (1<<8) /* Recv ready DMA enable */
88 #define UCR1_IREN (1<<7) /* Infrared interface enable */
89 #define UCR1_TXMPTYEN (1<<6) /* Transimitter empty interrupt enable */
90 #define UCR1_RTSDEN (1<<5) /* RTS delta interrupt enable */
91 #define UCR1_SNDBRK (1<<4) /* Send break */
92 #define UCR1_TDMAEN (1<<3) /* Transmitter ready DMA enable */
93 #define IMX1_UCR1_UARTCLKEN (1<<2) /* UART clock enabled, i.mx1 only */
94 #define UCR1_DOZE (1<<1) /* Doze */
95 #define UCR1_UARTEN (1<<0) /* UART enabled */
96 #define UCR2_ESCI (1<<15) /* Escape seq interrupt enable */
97 #define UCR2_IRTS (1<<14) /* Ignore RTS pin */
98 #define UCR2_CTSC (1<<13) /* CTS pin control */
99 #define UCR2_CTS (1<<12) /* Clear to send */
100 #define UCR2_ESCEN (1<<11) /* Escape enable */
101 #define UCR2_PREN (1<<8) /* Parity enable */
102 #define UCR2_PROE (1<<7) /* Parity odd/even */
103 #define UCR2_STPB (1<<6) /* Stop */
104 #define UCR2_WS (1<<5) /* Word size */
105 #define UCR2_RTSEN (1<<4) /* Request to send interrupt enable */
106 #define UCR2_ATEN (1<<3) /* Aging Timer Enable */
107 #define UCR2_TXEN (1<<2) /* Transmitter enabled */
108 #define UCR2_RXEN (1<<1) /* Receiver enabled */
109 #define UCR2_SRST (1<<0) /* SW reset */
110 #define UCR3_DTREN (1<<13) /* DTR interrupt enable */
111 #define UCR3_PARERREN (1<<12) /* Parity enable */
112 #define UCR3_FRAERREN (1<<11) /* Frame error interrupt enable */
113 #define UCR3_DSR (1<<10) /* Data set ready */
114 #define UCR3_DCD (1<<9) /* Data carrier detect */
115 #define UCR3_RI (1<<8) /* Ring indicator */
116 #define UCR3_TIMEOUTEN (1<<7) /* Timeout interrupt enable */
117 #define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */
118 #define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */
119 #define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */
120 #define IMX21_UCR3_RXDMUXSEL (1<<2) /* RXD Muxed Input Select */
121 #define UCR3_INVT (1<<1) /* Inverted Infrared transmission */
122 #define UCR3_BPEN (1<<0) /* Preset registers enable */
123 #define UCR4_CTSTL_SHF 10 /* CTS trigger level shift */
124 #define UCR4_CTSTL_MASK 0x3F /* CTS trigger is 6 bits wide */
125 #define UCR4_INVR (1<<9) /* Inverted infrared reception */
126 #define UCR4_ENIRI (1<<8) /* Serial infrared interrupt enable */
127 #define UCR4_WKEN (1<<7) /* Wake interrupt enable */
128 #define UCR4_REF16 (1<<6) /* Ref freq 16 MHz */
129 #define UCR4_IRSC (1<<5) /* IR special case */
130 #define UCR4_TCEN (1<<3) /* Transmit complete interrupt enable */
131 #define UCR4_BKEN (1<<2) /* Break condition interrupt enable */
132 #define UCR4_OREN (1<<1) /* Receiver overrun interrupt enable */
133 #define UCR4_DREN (1<<0) /* Recv data ready interrupt enable */
134 #define UFCR_RXTL_SHF 0 /* Receiver trigger level shift */
135 #define UFCR_RFDIV (7<<7) /* Reference freq divider mask */
136 #define UFCR_RFDIV_REG(x) (((x) < 7 ? 6 - (x) : 6) << 7)
137 #define UFCR_TXTL_SHF 10 /* Transmitter trigger level shift */
138 #define USR1_PARITYERR (1<<15) /* Parity error interrupt flag */
139 #define USR1_RTSS (1<<14) /* RTS pin status */
140 #define USR1_TRDY (1<<13) /* Transmitter ready interrupt/dma flag */
141 #define USR1_RTSD (1<<12) /* RTS delta */
142 #define USR1_ESCF (1<<11) /* Escape seq interrupt flag */
143 #define USR1_FRAMERR (1<<10) /* Frame error interrupt flag */
144 #define USR1_RRDY (1<<9) /* Receiver ready interrupt/dma flag */
145 #define USR1_TIMEOUT (1<<7) /* Receive timeout interrupt status */
146 #define USR1_RXDS (1<<6) /* Receiver idle interrupt flag */
147 #define USR1_AIRINT (1<<5) /* Async IR wake interrupt flag */
148 #define USR1_AWAKE (1<<4) /* Aysnc wake interrupt flag */
149 #define USR2_ADET (1<<15) /* Auto baud rate detect complete */
150 #define USR2_TXFE (1<<14) /* Transmit buffer FIFO empty */
151 #define USR2_DTRF (1<<13) /* DTR edge interrupt flag */
152 #define USR2_IDLE (1<<12) /* Idle condition */
153 #define USR2_IRINT (1<<8) /* Serial infrared interrupt flag */
154 #define USR2_WAKE (1<<7) /* Wake */
155 #define USR2_RTSF (1<<4) /* RTS edge interrupt flag */
156 #define USR2_TXDC (1<<3) /* Transmitter complete */
157 #define USR2_BRCD (1<<2) /* Break condition */
158 #define USR2_ORE (1<<1) /* Overrun error */
159 #define USR2_RDR (1<<0) /* Recv data ready */
160 #define UTS_FRCPERR (1<<13) /* Force parity error */
161 #define UTS_LOOP (1<<12) /* Loop tx and rx */
162 #define UTS_TXEMPTY (1<<6) /* TxFIFO empty */
163 #define UTS_RXEMPTY (1<<5) /* RxFIFO empty */
164 #define UTS_TXFULL (1<<4) /* TxFIFO full */
165 #define UTS_RXFULL (1<<3) /* RxFIFO full */
166 #define UTS_SOFTRST (1<<0) /* Software reset */
168 /* We've been assigned a range on the "Low-density serial ports" major */
169 #define SERIAL_IMX_MAJOR 207
170 #define MINOR_START 16
171 #define DEV_NAME "ttymxc"
174 * This determines how often we check the modem status signals
175 * for any change. They generally aren't connected to an IRQ
176 * so we have to poll them. We also check immediately before
177 * filling the TX fifo incase CTS has been dropped.
179 #define MCTRL_TIMEOUT (250*HZ/1000)
181 #define DRIVER_NAME "IMX-uart"
185 /* i.mx21 type uart runs on all i.mx except i.mx1 */
191 /* device type dependent stuff */
192 struct imx_uart_data
{
194 enum imx_uart_type devtype
;
198 struct uart_port port
;
199 struct timer_list timer
;
200 unsigned int old_status
;
201 int txirq
,rxirq
,rtsirq
;
202 unsigned int have_rtscts
:1;
203 unsigned int use_irda
:1;
204 unsigned int irda_inv_rx
:1;
205 unsigned int irda_inv_tx
:1;
206 unsigned short trcv_delay
; /* transceiver delay */
209 const struct imx_uart_data
*devdata
;
212 struct imx_port_ucrs
{
219 #define USE_IRDA(sport) ((sport)->use_irda)
221 #define USE_IRDA(sport) (0)
224 static struct imx_uart_data imx_uart_devdata
[] = {
227 .devtype
= IMX1_UART
,
230 .uts_reg
= IMX21_UTS
,
231 .devtype
= IMX21_UART
,
235 static struct platform_device_id imx_uart_devtype
[] = {
238 .driver_data
= (kernel_ulong_t
) &imx_uart_devdata
[IMX1_UART
],
240 .name
= "imx21-uart",
241 .driver_data
= (kernel_ulong_t
) &imx_uart_devdata
[IMX21_UART
],
246 MODULE_DEVICE_TABLE(platform
, imx_uart_devtype
);
248 static struct of_device_id imx_uart_dt_ids
[] = {
249 { .compatible
= "fsl,imx1-uart", .data
= &imx_uart_devdata
[IMX1_UART
], },
250 { .compatible
= "fsl,imx21-uart", .data
= &imx_uart_devdata
[IMX21_UART
], },
253 MODULE_DEVICE_TABLE(of
, imx_uart_dt_ids
);
255 static inline unsigned uts_reg(struct imx_port
*sport
)
257 return sport
->devdata
->uts_reg
;
260 static inline int is_imx1_uart(struct imx_port
*sport
)
262 return sport
->devdata
->devtype
== IMX1_UART
;
265 static inline int is_imx21_uart(struct imx_port
*sport
)
267 return sport
->devdata
->devtype
== IMX21_UART
;
271 * Save and restore functions for UCR1, UCR2 and UCR3 registers
273 static void imx_port_ucrs_save(struct uart_port
*port
,
274 struct imx_port_ucrs
*ucr
)
276 /* save control registers */
277 ucr
->ucr1
= readl(port
->membase
+ UCR1
);
278 ucr
->ucr2
= readl(port
->membase
+ UCR2
);
279 ucr
->ucr3
= readl(port
->membase
+ UCR3
);
282 static void imx_port_ucrs_restore(struct uart_port
*port
,
283 struct imx_port_ucrs
*ucr
)
285 /* restore control registers */
286 writel(ucr
->ucr1
, port
->membase
+ UCR1
);
287 writel(ucr
->ucr2
, port
->membase
+ UCR2
);
288 writel(ucr
->ucr3
, port
->membase
+ UCR3
);
292 * Handle any change of modem status signal since we were last called.
294 static void imx_mctrl_check(struct imx_port
*sport
)
296 unsigned int status
, changed
;
298 status
= sport
->port
.ops
->get_mctrl(&sport
->port
);
299 changed
= status
^ sport
->old_status
;
304 sport
->old_status
= status
;
306 if (changed
& TIOCM_RI
)
307 sport
->port
.icount
.rng
++;
308 if (changed
& TIOCM_DSR
)
309 sport
->port
.icount
.dsr
++;
310 if (changed
& TIOCM_CAR
)
311 uart_handle_dcd_change(&sport
->port
, status
& TIOCM_CAR
);
312 if (changed
& TIOCM_CTS
)
313 uart_handle_cts_change(&sport
->port
, status
& TIOCM_CTS
);
315 wake_up_interruptible(&sport
->port
.state
->port
.delta_msr_wait
);
319 * This is our per-port timeout handler, for checking the
320 * modem status signals.
322 static void imx_timeout(unsigned long data
)
324 struct imx_port
*sport
= (struct imx_port
*)data
;
327 if (sport
->port
.state
) {
328 spin_lock_irqsave(&sport
->port
.lock
, flags
);
329 imx_mctrl_check(sport
);
330 spin_unlock_irqrestore(&sport
->port
.lock
, flags
);
332 mod_timer(&sport
->timer
, jiffies
+ MCTRL_TIMEOUT
);
337 * interrupts disabled on entry
339 static void imx_stop_tx(struct uart_port
*port
)
341 struct imx_port
*sport
= (struct imx_port
*)port
;
344 if (USE_IRDA(sport
)) {
345 /* half duplex - wait for end of transmission */
348 !(readl(sport
->port
.membase
+ USR2
) & USR2_TXDC
)) {
353 * irda transceiver - wait a bit more to avoid
354 * cutoff, hardware dependent
356 udelay(sport
->trcv_delay
);
359 * half duplex - reactivate receive mode,
360 * flush receive pipe echo crap
362 if (readl(sport
->port
.membase
+ USR2
) & USR2_TXDC
) {
363 temp
= readl(sport
->port
.membase
+ UCR1
);
364 temp
&= ~(UCR1_TXMPTYEN
| UCR1_TRDYEN
);
365 writel(temp
, sport
->port
.membase
+ UCR1
);
367 temp
= readl(sport
->port
.membase
+ UCR4
);
368 temp
&= ~(UCR4_TCEN
);
369 writel(temp
, sport
->port
.membase
+ UCR4
);
371 while (readl(sport
->port
.membase
+ URXD0
) &
375 temp
= readl(sport
->port
.membase
+ UCR1
);
377 writel(temp
, sport
->port
.membase
+ UCR1
);
379 temp
= readl(sport
->port
.membase
+ UCR4
);
381 writel(temp
, sport
->port
.membase
+ UCR4
);
386 temp
= readl(sport
->port
.membase
+ UCR1
);
387 writel(temp
& ~UCR1_TXMPTYEN
, sport
->port
.membase
+ UCR1
);
391 * interrupts disabled on entry
393 static void imx_stop_rx(struct uart_port
*port
)
395 struct imx_port
*sport
= (struct imx_port
*)port
;
398 temp
= readl(sport
->port
.membase
+ UCR2
);
399 writel(temp
&~ UCR2_RXEN
, sport
->port
.membase
+ UCR2
);
403 * Set the modem control timer to fire immediately.
405 static void imx_enable_ms(struct uart_port
*port
)
407 struct imx_port
*sport
= (struct imx_port
*)port
;
409 mod_timer(&sport
->timer
, jiffies
);
412 static inline void imx_transmit_buffer(struct imx_port
*sport
)
414 struct circ_buf
*xmit
= &sport
->port
.state
->xmit
;
416 while (!uart_circ_empty(xmit
) &&
417 !(readl(sport
->port
.membase
+ uts_reg(sport
))
419 /* send xmit->buf[xmit->tail]
420 * out the port here */
421 writel(xmit
->buf
[xmit
->tail
], sport
->port
.membase
+ URTX0
);
422 xmit
->tail
= (xmit
->tail
+ 1) & (UART_XMIT_SIZE
- 1);
423 sport
->port
.icount
.tx
++;
426 if (uart_circ_chars_pending(xmit
) < WAKEUP_CHARS
)
427 uart_write_wakeup(&sport
->port
);
429 if (uart_circ_empty(xmit
))
430 imx_stop_tx(&sport
->port
);
434 * interrupts disabled on entry
436 static void imx_start_tx(struct uart_port
*port
)
438 struct imx_port
*sport
= (struct imx_port
*)port
;
441 if (USE_IRDA(sport
)) {
442 /* half duplex in IrDA mode; have to disable receive mode */
443 temp
= readl(sport
->port
.membase
+ UCR4
);
444 temp
&= ~(UCR4_DREN
);
445 writel(temp
, sport
->port
.membase
+ UCR4
);
447 temp
= readl(sport
->port
.membase
+ UCR1
);
448 temp
&= ~(UCR1_RRDYEN
);
449 writel(temp
, sport
->port
.membase
+ UCR1
);
452 temp
= readl(sport
->port
.membase
+ UCR1
);
453 writel(temp
| UCR1_TXMPTYEN
, sport
->port
.membase
+ UCR1
);
455 if (USE_IRDA(sport
)) {
456 temp
= readl(sport
->port
.membase
+ UCR1
);
458 writel(temp
, sport
->port
.membase
+ UCR1
);
460 temp
= readl(sport
->port
.membase
+ UCR4
);
462 writel(temp
, sport
->port
.membase
+ UCR4
);
465 if (readl(sport
->port
.membase
+ uts_reg(sport
)) & UTS_TXEMPTY
)
466 imx_transmit_buffer(sport
);
469 static irqreturn_t
imx_rtsint(int irq
, void *dev_id
)
471 struct imx_port
*sport
= dev_id
;
475 spin_lock_irqsave(&sport
->port
.lock
, flags
);
477 writel(USR1_RTSD
, sport
->port
.membase
+ USR1
);
478 val
= readl(sport
->port
.membase
+ USR1
) & USR1_RTSS
;
479 uart_handle_cts_change(&sport
->port
, !!val
);
480 wake_up_interruptible(&sport
->port
.state
->port
.delta_msr_wait
);
482 spin_unlock_irqrestore(&sport
->port
.lock
, flags
);
486 static irqreturn_t
imx_txint(int irq
, void *dev_id
)
488 struct imx_port
*sport
= dev_id
;
489 struct circ_buf
*xmit
= &sport
->port
.state
->xmit
;
492 spin_lock_irqsave(&sport
->port
.lock
,flags
);
493 if (sport
->port
.x_char
)
496 writel(sport
->port
.x_char
, sport
->port
.membase
+ URTX0
);
500 if (uart_circ_empty(xmit
) || uart_tx_stopped(&sport
->port
)) {
501 imx_stop_tx(&sport
->port
);
505 imx_transmit_buffer(sport
);
507 if (uart_circ_chars_pending(xmit
) < WAKEUP_CHARS
)
508 uart_write_wakeup(&sport
->port
);
511 spin_unlock_irqrestore(&sport
->port
.lock
,flags
);
515 static irqreturn_t
imx_rxint(int irq
, void *dev_id
)
517 struct imx_port
*sport
= dev_id
;
518 unsigned int rx
,flg
,ignored
= 0;
519 struct tty_struct
*tty
= sport
->port
.state
->port
.tty
;
520 unsigned long flags
, temp
;
522 spin_lock_irqsave(&sport
->port
.lock
,flags
);
524 while (readl(sport
->port
.membase
+ USR2
) & USR2_RDR
) {
526 sport
->port
.icount
.rx
++;
528 rx
= readl(sport
->port
.membase
+ URXD0
);
530 temp
= readl(sport
->port
.membase
+ USR2
);
531 if (temp
& USR2_BRCD
) {
532 writel(USR2_BRCD
, sport
->port
.membase
+ USR2
);
533 if (uart_handle_break(&sport
->port
))
537 if (uart_handle_sysrq_char(&sport
->port
, (unsigned char)rx
))
540 if (unlikely(rx
& URXD_ERR
)) {
542 sport
->port
.icount
.brk
++;
543 else if (rx
& URXD_PRERR
)
544 sport
->port
.icount
.parity
++;
545 else if (rx
& URXD_FRMERR
)
546 sport
->port
.icount
.frame
++;
547 if (rx
& URXD_OVRRUN
)
548 sport
->port
.icount
.overrun
++;
550 if (rx
& sport
->port
.ignore_status_mask
) {
556 rx
&= sport
->port
.read_status_mask
;
560 else if (rx
& URXD_PRERR
)
562 else if (rx
& URXD_FRMERR
)
564 if (rx
& URXD_OVRRUN
)
568 sport
->port
.sysrq
= 0;
572 tty_insert_flip_char(tty
, rx
, flg
);
576 spin_unlock_irqrestore(&sport
->port
.lock
,flags
);
577 tty_flip_buffer_push(tty
);
581 static irqreturn_t
imx_int(int irq
, void *dev_id
)
583 struct imx_port
*sport
= dev_id
;
586 sts
= readl(sport
->port
.membase
+ USR1
);
589 imx_rxint(irq
, dev_id
);
591 if (sts
& USR1_TRDY
&&
592 readl(sport
->port
.membase
+ UCR1
) & UCR1_TXMPTYEN
)
593 imx_txint(irq
, dev_id
);
596 imx_rtsint(irq
, dev_id
);
598 if (sts
& USR1_AWAKE
)
599 writel(USR1_AWAKE
, sport
->port
.membase
+ USR1
);
605 * Return TIOCSER_TEMT when transmitter is not busy.
607 static unsigned int imx_tx_empty(struct uart_port
*port
)
609 struct imx_port
*sport
= (struct imx_port
*)port
;
611 return (readl(sport
->port
.membase
+ USR2
) & USR2_TXDC
) ? TIOCSER_TEMT
: 0;
615 * We have a modem side uart, so the meanings of RTS and CTS are inverted.
617 static unsigned int imx_get_mctrl(struct uart_port
*port
)
619 struct imx_port
*sport
= (struct imx_port
*)port
;
620 unsigned int tmp
= TIOCM_DSR
| TIOCM_CAR
;
622 if (readl(sport
->port
.membase
+ USR1
) & USR1_RTSS
)
625 if (readl(sport
->port
.membase
+ UCR2
) & UCR2_CTS
)
631 static void imx_set_mctrl(struct uart_port
*port
, unsigned int mctrl
)
633 struct imx_port
*sport
= (struct imx_port
*)port
;
636 temp
= readl(sport
->port
.membase
+ UCR2
) & ~UCR2_CTS
;
638 if (mctrl
& TIOCM_RTS
)
641 writel(temp
, sport
->port
.membase
+ UCR2
);
645 * Interrupts always disabled.
647 static void imx_break_ctl(struct uart_port
*port
, int break_state
)
649 struct imx_port
*sport
= (struct imx_port
*)port
;
650 unsigned long flags
, temp
;
652 spin_lock_irqsave(&sport
->port
.lock
, flags
);
654 temp
= readl(sport
->port
.membase
+ UCR1
) & ~UCR1_SNDBRK
;
656 if ( break_state
!= 0 )
659 writel(temp
, sport
->port
.membase
+ UCR1
);
661 spin_unlock_irqrestore(&sport
->port
.lock
, flags
);
664 #define TXTL 2 /* reset default */
665 #define RXTL 1 /* reset default */
667 static int imx_setup_ufcr(struct imx_port
*sport
, unsigned int mode
)
670 unsigned int ufcr_rfdiv
;
672 /* set receiver / transmitter trigger level.
673 * RFDIV is set such way to satisfy requested uartclk value
675 val
= TXTL
<< 10 | RXTL
;
676 ufcr_rfdiv
= (clk_get_rate(sport
->clk_per
) + sport
->port
.uartclk
/ 2)
677 / sport
->port
.uartclk
;
682 val
|= UFCR_RFDIV_REG(ufcr_rfdiv
);
684 writel(val
, sport
->port
.membase
+ UFCR
);
689 /* half the RX buffer size */
692 static int imx_startup(struct uart_port
*port
)
694 struct imx_port
*sport
= (struct imx_port
*)port
;
696 unsigned long flags
, temp
;
698 imx_setup_ufcr(sport
, 0);
700 /* disable the DREN bit (Data Ready interrupt enable) before
703 temp
= readl(sport
->port
.membase
+ UCR4
);
708 /* set the trigger level for CTS */
709 temp
&= ~(UCR4_CTSTL_MASK
<< UCR4_CTSTL_SHF
);
710 temp
|= CTSTL
<< UCR4_CTSTL_SHF
;
712 writel(temp
& ~UCR4_DREN
, sport
->port
.membase
+ UCR4
);
714 if (USE_IRDA(sport
)) {
715 /* reset fifo's and state machines */
717 temp
= readl(sport
->port
.membase
+ UCR2
);
719 writel(temp
, sport
->port
.membase
+ UCR2
);
720 while (!(readl(sport
->port
.membase
+ UCR2
) & UCR2_SRST
) &&
727 * Allocate the IRQ(s) i.MX1 has three interrupts whereas later
728 * chips only have one interrupt.
730 if (sport
->txirq
> 0) {
731 retval
= request_irq(sport
->rxirq
, imx_rxint
, 0,
736 retval
= request_irq(sport
->txirq
, imx_txint
, 0,
741 /* do not use RTS IRQ on IrDA */
742 if (!USE_IRDA(sport
)) {
743 retval
= request_irq(sport
->rtsirq
, imx_rtsint
, 0,
749 retval
= request_irq(sport
->port
.irq
, imx_int
, 0,
752 free_irq(sport
->port
.irq
, sport
);
758 * Finally, clear and enable interrupts
760 writel(USR1_RTSD
, sport
->port
.membase
+ USR1
);
762 temp
= readl(sport
->port
.membase
+ UCR1
);
763 temp
|= UCR1_RRDYEN
| UCR1_RTSDEN
| UCR1_UARTEN
;
765 if (USE_IRDA(sport
)) {
767 temp
&= ~(UCR1_RTSDEN
);
770 writel(temp
, sport
->port
.membase
+ UCR1
);
772 temp
= readl(sport
->port
.membase
+ UCR2
);
773 temp
|= (UCR2_RXEN
| UCR2_TXEN
);
774 writel(temp
, sport
->port
.membase
+ UCR2
);
776 if (USE_IRDA(sport
)) {
780 (readl(sport
->port
.membase
+ URXD0
) & URXD_CHARRDY
)) {
785 if (is_imx21_uart(sport
)) {
786 temp
= readl(sport
->port
.membase
+ UCR3
);
787 temp
|= IMX21_UCR3_RXDMUXSEL
;
788 writel(temp
, sport
->port
.membase
+ UCR3
);
791 if (USE_IRDA(sport
)) {
792 temp
= readl(sport
->port
.membase
+ UCR4
);
793 if (sport
->irda_inv_rx
)
796 temp
&= ~(UCR4_INVR
);
797 writel(temp
| UCR4_DREN
, sport
->port
.membase
+ UCR4
);
799 temp
= readl(sport
->port
.membase
+ UCR3
);
800 if (sport
->irda_inv_tx
)
803 temp
&= ~(UCR3_INVT
);
804 writel(temp
, sport
->port
.membase
+ UCR3
);
808 * Enable modem status interrupts
810 spin_lock_irqsave(&sport
->port
.lock
,flags
);
811 imx_enable_ms(&sport
->port
);
812 spin_unlock_irqrestore(&sport
->port
.lock
,flags
);
814 if (USE_IRDA(sport
)) {
815 struct imxuart_platform_data
*pdata
;
816 pdata
= sport
->port
.dev
->platform_data
;
817 sport
->irda_inv_rx
= pdata
->irda_inv_rx
;
818 sport
->irda_inv_tx
= pdata
->irda_inv_tx
;
819 sport
->trcv_delay
= pdata
->transceiver_delay
;
820 if (pdata
->irda_enable
)
821 pdata
->irda_enable(1);
828 free_irq(sport
->txirq
, sport
);
831 free_irq(sport
->rxirq
, sport
);
836 static void imx_shutdown(struct uart_port
*port
)
838 struct imx_port
*sport
= (struct imx_port
*)port
;
841 temp
= readl(sport
->port
.membase
+ UCR2
);
842 temp
&= ~(UCR2_TXEN
);
843 writel(temp
, sport
->port
.membase
+ UCR2
);
845 if (USE_IRDA(sport
)) {
846 struct imxuart_platform_data
*pdata
;
847 pdata
= sport
->port
.dev
->platform_data
;
848 if (pdata
->irda_enable
)
849 pdata
->irda_enable(0);
855 del_timer_sync(&sport
->timer
);
858 * Free the interrupts
860 if (sport
->txirq
> 0) {
861 if (!USE_IRDA(sport
))
862 free_irq(sport
->rtsirq
, sport
);
863 free_irq(sport
->txirq
, sport
);
864 free_irq(sport
->rxirq
, sport
);
866 free_irq(sport
->port
.irq
, sport
);
869 * Disable all interrupts, port and break condition.
872 temp
= readl(sport
->port
.membase
+ UCR1
);
873 temp
&= ~(UCR1_TXMPTYEN
| UCR1_RRDYEN
| UCR1_RTSDEN
| UCR1_UARTEN
);
875 temp
&= ~(UCR1_IREN
);
877 writel(temp
, sport
->port
.membase
+ UCR1
);
881 imx_set_termios(struct uart_port
*port
, struct ktermios
*termios
,
882 struct ktermios
*old
)
884 struct imx_port
*sport
= (struct imx_port
*)port
;
886 unsigned int ucr2
, old_ucr1
, old_txrxen
, baud
, quot
;
887 unsigned int old_csize
= old
? old
->c_cflag
& CSIZE
: CS8
;
888 unsigned int div
, ufcr
;
889 unsigned long num
, denom
;
893 * If we don't support modem control lines, don't allow
897 termios
->c_cflag
&= ~(HUPCL
| CRTSCTS
| CMSPAR
);
898 termios
->c_cflag
|= CLOCAL
;
902 * We only support CS7 and CS8.
904 while ((termios
->c_cflag
& CSIZE
) != CS7
&&
905 (termios
->c_cflag
& CSIZE
) != CS8
) {
906 termios
->c_cflag
&= ~CSIZE
;
907 termios
->c_cflag
|= old_csize
;
911 if ((termios
->c_cflag
& CSIZE
) == CS8
)
912 ucr2
= UCR2_WS
| UCR2_SRST
| UCR2_IRTS
;
914 ucr2
= UCR2_SRST
| UCR2_IRTS
;
916 if (termios
->c_cflag
& CRTSCTS
) {
917 if( sport
->have_rtscts
) {
921 termios
->c_cflag
&= ~CRTSCTS
;
925 if (termios
->c_cflag
& CSTOPB
)
927 if (termios
->c_cflag
& PARENB
) {
929 if (termios
->c_cflag
& PARODD
)
933 del_timer_sync(&sport
->timer
);
936 * Ask the core to calculate the divisor for us.
938 baud
= uart_get_baud_rate(port
, termios
, old
, 50, port
->uartclk
/ 16);
939 quot
= uart_get_divisor(port
, baud
);
941 spin_lock_irqsave(&sport
->port
.lock
, flags
);
943 sport
->port
.read_status_mask
= 0;
944 if (termios
->c_iflag
& INPCK
)
945 sport
->port
.read_status_mask
|= (URXD_FRMERR
| URXD_PRERR
);
946 if (termios
->c_iflag
& (BRKINT
| PARMRK
))
947 sport
->port
.read_status_mask
|= URXD_BRK
;
950 * Characters to ignore
952 sport
->port
.ignore_status_mask
= 0;
953 if (termios
->c_iflag
& IGNPAR
)
954 sport
->port
.ignore_status_mask
|= URXD_PRERR
;
955 if (termios
->c_iflag
& IGNBRK
) {
956 sport
->port
.ignore_status_mask
|= URXD_BRK
;
958 * If we're ignoring parity and break indicators,
959 * ignore overruns too (for real raw support).
961 if (termios
->c_iflag
& IGNPAR
)
962 sport
->port
.ignore_status_mask
|= URXD_OVRRUN
;
966 * Update the per-port timeout.
968 uart_update_timeout(port
, termios
->c_cflag
, baud
);
971 * disable interrupts and drain transmitter
973 old_ucr1
= readl(sport
->port
.membase
+ UCR1
);
974 writel(old_ucr1
& ~(UCR1_TXMPTYEN
| UCR1_RRDYEN
| UCR1_RTSDEN
),
975 sport
->port
.membase
+ UCR1
);
977 while ( !(readl(sport
->port
.membase
+ USR2
) & USR2_TXDC
))
980 /* then, disable everything */
981 old_txrxen
= readl(sport
->port
.membase
+ UCR2
);
982 writel(old_txrxen
& ~( UCR2_TXEN
| UCR2_RXEN
),
983 sport
->port
.membase
+ UCR2
);
984 old_txrxen
&= (UCR2_TXEN
| UCR2_RXEN
);
986 if (USE_IRDA(sport
)) {
988 * use maximum available submodule frequency to
989 * avoid missing short pulses due to low sampling rate
993 div
= sport
->port
.uartclk
/ (baud
* 16);
1000 rational_best_approximation(16 * div
* baud
, sport
->port
.uartclk
,
1001 1 << 16, 1 << 16, &num
, &denom
);
1003 tdiv64
= sport
->port
.uartclk
;
1005 do_div(tdiv64
, denom
* 16 * div
);
1006 tty_termios_encode_baud_rate(termios
,
1007 (speed_t
)tdiv64
, (speed_t
)tdiv64
);
1012 ufcr
= readl(sport
->port
.membase
+ UFCR
);
1013 ufcr
= (ufcr
& (~UFCR_RFDIV
)) | UFCR_RFDIV_REG(div
);
1014 writel(ufcr
, sport
->port
.membase
+ UFCR
);
1016 writel(num
, sport
->port
.membase
+ UBIR
);
1017 writel(denom
, sport
->port
.membase
+ UBMR
);
1019 if (is_imx21_uart(sport
))
1020 writel(sport
->port
.uartclk
/ div
/ 1000,
1021 sport
->port
.membase
+ IMX21_ONEMS
);
1023 writel(old_ucr1
, sport
->port
.membase
+ UCR1
);
1025 /* set the parity, stop bits and data size */
1026 writel(ucr2
| old_txrxen
, sport
->port
.membase
+ UCR2
);
1028 if (UART_ENABLE_MS(&sport
->port
, termios
->c_cflag
))
1029 imx_enable_ms(&sport
->port
);
1031 spin_unlock_irqrestore(&sport
->port
.lock
, flags
);
1034 static const char *imx_type(struct uart_port
*port
)
1036 struct imx_port
*sport
= (struct imx_port
*)port
;
1038 return sport
->port
.type
== PORT_IMX
? "IMX" : NULL
;
1042 * Release the memory region(s) being used by 'port'.
1044 static void imx_release_port(struct uart_port
*port
)
1046 struct platform_device
*pdev
= to_platform_device(port
->dev
);
1047 struct resource
*mmres
;
1049 mmres
= platform_get_resource(pdev
, IORESOURCE_MEM
, 0);
1050 release_mem_region(mmres
->start
, resource_size(mmres
));
1054 * Request the memory region(s) being used by 'port'.
1056 static int imx_request_port(struct uart_port
*port
)
1058 struct platform_device
*pdev
= to_platform_device(port
->dev
);
1059 struct resource
*mmres
;
1062 mmres
= platform_get_resource(pdev
, IORESOURCE_MEM
, 0);
1066 ret
= request_mem_region(mmres
->start
, resource_size(mmres
), "imx-uart");
1068 return ret
? 0 : -EBUSY
;
1072 * Configure/autoconfigure the port.
1074 static void imx_config_port(struct uart_port
*port
, int flags
)
1076 struct imx_port
*sport
= (struct imx_port
*)port
;
1078 if (flags
& UART_CONFIG_TYPE
&&
1079 imx_request_port(&sport
->port
) == 0)
1080 sport
->port
.type
= PORT_IMX
;
1084 * Verify the new serial_struct (for TIOCSSERIAL).
1085 * The only change we allow are to the flags and type, and
1086 * even then only between PORT_IMX and PORT_UNKNOWN
1089 imx_verify_port(struct uart_port
*port
, struct serial_struct
*ser
)
1091 struct imx_port
*sport
= (struct imx_port
*)port
;
1094 if (ser
->type
!= PORT_UNKNOWN
&& ser
->type
!= PORT_IMX
)
1096 if (sport
->port
.irq
!= ser
->irq
)
1098 if (ser
->io_type
!= UPIO_MEM
)
1100 if (sport
->port
.uartclk
/ 16 != ser
->baud_base
)
1102 if ((void *)sport
->port
.mapbase
!= ser
->iomem_base
)
1104 if (sport
->port
.iobase
!= ser
->port
)
1111 #if defined(CONFIG_CONSOLE_POLL)
1112 static int imx_poll_get_char(struct uart_port
*port
)
1114 struct imx_port_ucrs old_ucr
;
1115 unsigned int status
;
1118 /* save control registers */
1119 imx_port_ucrs_save(port
, &old_ucr
);
1121 /* disable interrupts */
1122 writel(UCR1_UARTEN
, port
->membase
+ UCR1
);
1123 writel(old_ucr
.ucr2
& ~(UCR2_ATEN
| UCR2_RTSEN
| UCR2_ESCI
),
1124 port
->membase
+ UCR2
);
1125 writel(old_ucr
.ucr3
& ~(UCR3_DCD
| UCR3_RI
| UCR3_DTREN
),
1126 port
->membase
+ UCR3
);
1130 status
= readl(port
->membase
+ USR2
);
1131 } while (~status
& USR2_RDR
);
1134 c
= readl(port
->membase
+ URXD0
);
1136 /* restore control registers */
1137 imx_port_ucrs_restore(port
, &old_ucr
);
1142 static void imx_poll_put_char(struct uart_port
*port
, unsigned char c
)
1144 struct imx_port_ucrs old_ucr
;
1145 unsigned int status
;
1147 /* save control registers */
1148 imx_port_ucrs_save(port
, &old_ucr
);
1150 /* disable interrupts */
1151 writel(UCR1_UARTEN
, port
->membase
+ UCR1
);
1152 writel(old_ucr
.ucr2
& ~(UCR2_ATEN
| UCR2_RTSEN
| UCR2_ESCI
),
1153 port
->membase
+ UCR2
);
1154 writel(old_ucr
.ucr3
& ~(UCR3_DCD
| UCR3_RI
| UCR3_DTREN
),
1155 port
->membase
+ UCR3
);
1159 status
= readl(port
->membase
+ USR1
);
1160 } while (~status
& USR1_TRDY
);
1163 writel(c
, port
->membase
+ URTX0
);
1167 status
= readl(port
->membase
+ USR2
);
1168 } while (~status
& USR2_TXDC
);
1170 /* restore control registers */
1171 imx_port_ucrs_restore(port
, &old_ucr
);
1175 static struct uart_ops imx_pops
= {
1176 .tx_empty
= imx_tx_empty
,
1177 .set_mctrl
= imx_set_mctrl
,
1178 .get_mctrl
= imx_get_mctrl
,
1179 .stop_tx
= imx_stop_tx
,
1180 .start_tx
= imx_start_tx
,
1181 .stop_rx
= imx_stop_rx
,
1182 .enable_ms
= imx_enable_ms
,
1183 .break_ctl
= imx_break_ctl
,
1184 .startup
= imx_startup
,
1185 .shutdown
= imx_shutdown
,
1186 .set_termios
= imx_set_termios
,
1188 .release_port
= imx_release_port
,
1189 .request_port
= imx_request_port
,
1190 .config_port
= imx_config_port
,
1191 .verify_port
= imx_verify_port
,
1192 #if defined(CONFIG_CONSOLE_POLL)
1193 .poll_get_char
= imx_poll_get_char
,
1194 .poll_put_char
= imx_poll_put_char
,
1198 static struct imx_port
*imx_ports
[UART_NR
];
1200 #ifdef CONFIG_SERIAL_IMX_CONSOLE
1201 static void imx_console_putchar(struct uart_port
*port
, int ch
)
1203 struct imx_port
*sport
= (struct imx_port
*)port
;
1205 while (readl(sport
->port
.membase
+ uts_reg(sport
)) & UTS_TXFULL
)
1208 writel(ch
, sport
->port
.membase
+ URTX0
);
1212 * Interrupts are disabled on entering
1215 imx_console_write(struct console
*co
, const char *s
, unsigned int count
)
1217 struct imx_port
*sport
= imx_ports
[co
->index
];
1218 struct imx_port_ucrs old_ucr
;
1222 * First, save UCR1/2/3 and then disable interrupts
1224 imx_port_ucrs_save(&sport
->port
, &old_ucr
);
1225 ucr1
= old_ucr
.ucr1
;
1227 if (is_imx1_uart(sport
))
1228 ucr1
|= IMX1_UCR1_UARTCLKEN
;
1229 ucr1
|= UCR1_UARTEN
;
1230 ucr1
&= ~(UCR1_TXMPTYEN
| UCR1_RRDYEN
| UCR1_RTSDEN
);
1232 writel(ucr1
, sport
->port
.membase
+ UCR1
);
1234 writel(old_ucr
.ucr2
| UCR2_TXEN
, sport
->port
.membase
+ UCR2
);
1236 uart_console_write(&sport
->port
, s
, count
, imx_console_putchar
);
1239 * Finally, wait for transmitter to become empty
1240 * and restore UCR1/2/3
1242 while (!(readl(sport
->port
.membase
+ USR2
) & USR2_TXDC
));
1244 imx_port_ucrs_restore(&sport
->port
, &old_ucr
);
1248 * If the port was already initialised (eg, by a boot loader),
1249 * try to determine the current setup.
1252 imx_console_get_options(struct imx_port
*sport
, int *baud
,
1253 int *parity
, int *bits
)
1256 if (readl(sport
->port
.membase
+ UCR1
) & UCR1_UARTEN
) {
1257 /* ok, the port was enabled */
1258 unsigned int ucr2
, ubir
,ubmr
, uartclk
;
1259 unsigned int baud_raw
;
1260 unsigned int ucfr_rfdiv
;
1262 ucr2
= readl(sport
->port
.membase
+ UCR2
);
1265 if (ucr2
& UCR2_PREN
) {
1266 if (ucr2
& UCR2_PROE
)
1277 ubir
= readl(sport
->port
.membase
+ UBIR
) & 0xffff;
1278 ubmr
= readl(sport
->port
.membase
+ UBMR
) & 0xffff;
1280 ucfr_rfdiv
= (readl(sport
->port
.membase
+ UFCR
) & UFCR_RFDIV
) >> 7;
1281 if (ucfr_rfdiv
== 6)
1284 ucfr_rfdiv
= 6 - ucfr_rfdiv
;
1286 uartclk
= clk_get_rate(sport
->clk_per
);
1287 uartclk
/= ucfr_rfdiv
;
1290 * The next code provides exact computation of
1291 * baud_raw = round(((uartclk/16) * (ubir + 1)) / (ubmr + 1))
1292 * without need of float support or long long division,
1293 * which would be required to prevent 32bit arithmetic overflow
1295 unsigned int mul
= ubir
+ 1;
1296 unsigned int div
= 16 * (ubmr
+ 1);
1297 unsigned int rem
= uartclk
% div
;
1299 baud_raw
= (uartclk
/ div
) * mul
;
1300 baud_raw
+= (rem
* mul
+ div
/ 2) / div
;
1301 *baud
= (baud_raw
+ 50) / 100 * 100;
1304 if(*baud
!= baud_raw
)
1305 printk(KERN_INFO
"Serial: Console IMX rounded baud rate from %d to %d\n",
1311 imx_console_setup(struct console
*co
, char *options
)
1313 struct imx_port
*sport
;
1320 * Check whether an invalid uart number has been specified, and
1321 * if so, search for the first available port that does have
1324 if (co
->index
== -1 || co
->index
>= ARRAY_SIZE(imx_ports
))
1326 sport
= imx_ports
[co
->index
];
1331 uart_parse_options(options
, &baud
, &parity
, &bits
, &flow
);
1333 imx_console_get_options(sport
, &baud
, &parity
, &bits
);
1335 imx_setup_ufcr(sport
, 0);
1337 return uart_set_options(&sport
->port
, co
, baud
, parity
, bits
, flow
);
1340 static struct uart_driver imx_reg
;
1341 static struct console imx_console
= {
1343 .write
= imx_console_write
,
1344 .device
= uart_console_device
,
1345 .setup
= imx_console_setup
,
1346 .flags
= CON_PRINTBUFFER
,
1351 #define IMX_CONSOLE &imx_console
1353 #define IMX_CONSOLE NULL
1356 static struct uart_driver imx_reg
= {
1357 .owner
= THIS_MODULE
,
1358 .driver_name
= DRIVER_NAME
,
1359 .dev_name
= DEV_NAME
,
1360 .major
= SERIAL_IMX_MAJOR
,
1361 .minor
= MINOR_START
,
1362 .nr
= ARRAY_SIZE(imx_ports
),
1363 .cons
= IMX_CONSOLE
,
1366 static int serial_imx_suspend(struct platform_device
*dev
, pm_message_t state
)
1368 struct imx_port
*sport
= platform_get_drvdata(dev
);
1371 /* enable wakeup from i.MX UART */
1372 val
= readl(sport
->port
.membase
+ UCR3
);
1374 writel(val
, sport
->port
.membase
+ UCR3
);
1377 uart_suspend_port(&imx_reg
, &sport
->port
);
1382 static int serial_imx_resume(struct platform_device
*dev
)
1384 struct imx_port
*sport
= platform_get_drvdata(dev
);
1387 /* disable wakeup from i.MX UART */
1388 val
= readl(sport
->port
.membase
+ UCR3
);
1389 val
&= ~UCR3_AWAKEN
;
1390 writel(val
, sport
->port
.membase
+ UCR3
);
1393 uart_resume_port(&imx_reg
, &sport
->port
);
1400 * This function returns 1 iff pdev isn't a device instatiated by dt, 0 iff it
1401 * could successfully get all information from dt or a negative errno.
1403 static int serial_imx_probe_dt(struct imx_port
*sport
,
1404 struct platform_device
*pdev
)
1406 struct device_node
*np
= pdev
->dev
.of_node
;
1407 const struct of_device_id
*of_id
=
1408 of_match_device(imx_uart_dt_ids
, &pdev
->dev
);
1412 /* no device tree device */
1415 ret
= of_alias_get_id(np
, "serial");
1417 dev_err(&pdev
->dev
, "failed to get alias id, errno %d\n", ret
);
1420 sport
->port
.line
= ret
;
1422 if (of_get_property(np
, "fsl,uart-has-rtscts", NULL
))
1423 sport
->have_rtscts
= 1;
1425 if (of_get_property(np
, "fsl,irda-mode", NULL
))
1426 sport
->use_irda
= 1;
1428 sport
->devdata
= of_id
->data
;
1433 static inline int serial_imx_probe_dt(struct imx_port
*sport
,
1434 struct platform_device
*pdev
)
1440 static void serial_imx_probe_pdata(struct imx_port
*sport
,
1441 struct platform_device
*pdev
)
1443 struct imxuart_platform_data
*pdata
= pdev
->dev
.platform_data
;
1445 sport
->port
.line
= pdev
->id
;
1446 sport
->devdata
= (struct imx_uart_data
*) pdev
->id_entry
->driver_data
;
1451 if (pdata
->flags
& IMXUART_HAVE_RTSCTS
)
1452 sport
->have_rtscts
= 1;
1454 if (pdata
->flags
& IMXUART_IRDA
)
1455 sport
->use_irda
= 1;
1458 static int serial_imx_probe(struct platform_device
*pdev
)
1460 struct imx_port
*sport
;
1461 struct imxuart_platform_data
*pdata
;
1464 struct resource
*res
;
1465 struct pinctrl
*pinctrl
;
1467 sport
= kzalloc(sizeof(*sport
), GFP_KERNEL
);
1471 ret
= serial_imx_probe_dt(sport
, pdev
);
1473 serial_imx_probe_pdata(sport
, pdev
);
1477 res
= platform_get_resource(pdev
, IORESOURCE_MEM
, 0);
1483 base
= ioremap(res
->start
, PAGE_SIZE
);
1489 sport
->port
.dev
= &pdev
->dev
;
1490 sport
->port
.mapbase
= res
->start
;
1491 sport
->port
.membase
= base
;
1492 sport
->port
.type
= PORT_IMX
,
1493 sport
->port
.iotype
= UPIO_MEM
;
1494 sport
->port
.irq
= platform_get_irq(pdev
, 0);
1495 sport
->rxirq
= platform_get_irq(pdev
, 0);
1496 sport
->txirq
= platform_get_irq(pdev
, 1);
1497 sport
->rtsirq
= platform_get_irq(pdev
, 2);
1498 sport
->port
.fifosize
= 32;
1499 sport
->port
.ops
= &imx_pops
;
1500 sport
->port
.flags
= UPF_BOOT_AUTOCONF
;
1501 init_timer(&sport
->timer
);
1502 sport
->timer
.function
= imx_timeout
;
1503 sport
->timer
.data
= (unsigned long)sport
;
1505 pinctrl
= devm_pinctrl_get_select_default(&pdev
->dev
);
1506 if (IS_ERR(pinctrl
)) {
1507 ret
= PTR_ERR(pinctrl
);
1508 dev_err(&pdev
->dev
, "failed to get default pinctrl: %d\n", ret
);
1512 sport
->clk_ipg
= devm_clk_get(&pdev
->dev
, "ipg");
1513 if (IS_ERR(sport
->clk_ipg
)) {
1514 ret
= PTR_ERR(sport
->clk_ipg
);
1515 dev_err(&pdev
->dev
, "failed to get ipg clk: %d\n", ret
);
1519 sport
->clk_per
= devm_clk_get(&pdev
->dev
, "per");
1520 if (IS_ERR(sport
->clk_per
)) {
1521 ret
= PTR_ERR(sport
->clk_per
);
1522 dev_err(&pdev
->dev
, "failed to get per clk: %d\n", ret
);
1526 clk_prepare_enable(sport
->clk_per
);
1527 clk_prepare_enable(sport
->clk_ipg
);
1529 sport
->port
.uartclk
= clk_get_rate(sport
->clk_per
);
1531 imx_ports
[sport
->port
.line
] = sport
;
1533 pdata
= pdev
->dev
.platform_data
;
1534 if (pdata
&& pdata
->init
) {
1535 ret
= pdata
->init(pdev
);
1540 ret
= uart_add_one_port(&imx_reg
, &sport
->port
);
1543 platform_set_drvdata(pdev
, &sport
->port
);
1547 if (pdata
&& pdata
->exit
)
1550 clk_disable_unprepare(sport
->clk_per
);
1551 clk_disable_unprepare(sport
->clk_ipg
);
1553 iounmap(sport
->port
.membase
);
1560 static int serial_imx_remove(struct platform_device
*pdev
)
1562 struct imxuart_platform_data
*pdata
;
1563 struct imx_port
*sport
= platform_get_drvdata(pdev
);
1565 pdata
= pdev
->dev
.platform_data
;
1567 platform_set_drvdata(pdev
, NULL
);
1569 uart_remove_one_port(&imx_reg
, &sport
->port
);
1571 clk_disable_unprepare(sport
->clk_per
);
1572 clk_disable_unprepare(sport
->clk_ipg
);
1574 if (pdata
&& pdata
->exit
)
1577 iounmap(sport
->port
.membase
);
1583 static struct platform_driver serial_imx_driver
= {
1584 .probe
= serial_imx_probe
,
1585 .remove
= serial_imx_remove
,
1587 .suspend
= serial_imx_suspend
,
1588 .resume
= serial_imx_resume
,
1589 .id_table
= imx_uart_devtype
,
1592 .owner
= THIS_MODULE
,
1593 .of_match_table
= imx_uart_dt_ids
,
1597 static int __init
imx_serial_init(void)
1601 printk(KERN_INFO
"Serial: IMX driver\n");
1603 ret
= uart_register_driver(&imx_reg
);
1607 ret
= platform_driver_register(&serial_imx_driver
);
1609 uart_unregister_driver(&imx_reg
);
1614 static void __exit
imx_serial_exit(void)
1616 platform_driver_unregister(&serial_imx_driver
);
1617 uart_unregister_driver(&imx_reg
);
1620 module_init(imx_serial_init
);
1621 module_exit(imx_serial_exit
);
1623 MODULE_AUTHOR("Sascha Hauer");
1624 MODULE_DESCRIPTION("IMX generic serial port driver");
1625 MODULE_LICENSE("GPL");
1626 MODULE_ALIAS("platform:imx-uart");