2 * udc.c - ChipIdea UDC driver
4 * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved.
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
13 #include <linux/delay.h>
14 #include <linux/device.h>
15 #include <linux/dmapool.h>
16 #include <linux/err.h>
17 #include <linux/irqreturn.h>
18 #include <linux/kernel.h>
19 #include <linux/slab.h>
20 #include <linux/pm_runtime.h>
21 #include <linux/usb/ch9.h>
22 #include <linux/usb/gadget.h>
23 #include <linux/usb/otg-fsm.h>
24 #include <linux/usb/chipidea.h>
32 /* control endpoint description */
33 static const struct usb_endpoint_descriptor
34 ctrl_endpt_out_desc
= {
35 .bLength
= USB_DT_ENDPOINT_SIZE
,
36 .bDescriptorType
= USB_DT_ENDPOINT
,
38 .bEndpointAddress
= USB_DIR_OUT
,
39 .bmAttributes
= USB_ENDPOINT_XFER_CONTROL
,
40 .wMaxPacketSize
= cpu_to_le16(CTRL_PAYLOAD_MAX
),
43 static const struct usb_endpoint_descriptor
44 ctrl_endpt_in_desc
= {
45 .bLength
= USB_DT_ENDPOINT_SIZE
,
46 .bDescriptorType
= USB_DT_ENDPOINT
,
48 .bEndpointAddress
= USB_DIR_IN
,
49 .bmAttributes
= USB_ENDPOINT_XFER_CONTROL
,
50 .wMaxPacketSize
= cpu_to_le16(CTRL_PAYLOAD_MAX
),
54 * hw_ep_bit: calculates the bit number
55 * @num: endpoint number
56 * @dir: endpoint direction
58 * This function returns bit number
60 static inline int hw_ep_bit(int num
, int dir
)
62 return num
+ (dir
? 16 : 0);
65 static inline int ep_to_bit(struct ci_hdrc
*ci
, int n
)
67 int fill
= 16 - ci
->hw_ep_max
/ 2;
69 if (n
>= ci
->hw_ep_max
/ 2)
76 * hw_device_state: enables/disables interrupts (execute without interruption)
77 * @dma: 0 => disable, !0 => enable and set dma engine
79 * This function returns an error code
81 static int hw_device_state(struct ci_hdrc
*ci
, u32 dma
)
84 hw_write(ci
, OP_ENDPTLISTADDR
, ~0, dma
);
85 /* interrupt, error, port change, reset, sleep/suspend */
86 hw_write(ci
, OP_USBINTR
, ~0,
87 USBi_UI
|USBi_UEI
|USBi_PCI
|USBi_URI
|USBi_SLI
);
89 hw_write(ci
, OP_USBINTR
, ~0, 0);
95 * hw_ep_flush: flush endpoint fifo (execute without interruption)
96 * @num: endpoint number
97 * @dir: endpoint direction
99 * This function returns an error code
101 static int hw_ep_flush(struct ci_hdrc
*ci
, int num
, int dir
)
103 int n
= hw_ep_bit(num
, dir
);
106 /* flush any pending transfer */
107 hw_write(ci
, OP_ENDPTFLUSH
, ~0, BIT(n
));
108 while (hw_read(ci
, OP_ENDPTFLUSH
, BIT(n
)))
110 } while (hw_read(ci
, OP_ENDPTSTAT
, BIT(n
)));
116 * hw_ep_disable: disables endpoint (execute without interruption)
117 * @num: endpoint number
118 * @dir: endpoint direction
120 * This function returns an error code
122 static int hw_ep_disable(struct ci_hdrc
*ci
, int num
, int dir
)
124 hw_ep_flush(ci
, num
, dir
);
125 hw_write(ci
, OP_ENDPTCTRL
+ num
,
126 dir
? ENDPTCTRL_TXE
: ENDPTCTRL_RXE
, 0);
131 * hw_ep_enable: enables endpoint (execute without interruption)
132 * @num: endpoint number
133 * @dir: endpoint direction
134 * @type: endpoint type
136 * This function returns an error code
138 static int hw_ep_enable(struct ci_hdrc
*ci
, int num
, int dir
, int type
)
143 mask
= ENDPTCTRL_TXT
; /* type */
144 data
= type
<< __ffs(mask
);
146 mask
|= ENDPTCTRL_TXS
; /* unstall */
147 mask
|= ENDPTCTRL_TXR
; /* reset data toggle */
148 data
|= ENDPTCTRL_TXR
;
149 mask
|= ENDPTCTRL_TXE
; /* enable */
150 data
|= ENDPTCTRL_TXE
;
152 mask
= ENDPTCTRL_RXT
; /* type */
153 data
= type
<< __ffs(mask
);
155 mask
|= ENDPTCTRL_RXS
; /* unstall */
156 mask
|= ENDPTCTRL_RXR
; /* reset data toggle */
157 data
|= ENDPTCTRL_RXR
;
158 mask
|= ENDPTCTRL_RXE
; /* enable */
159 data
|= ENDPTCTRL_RXE
;
161 hw_write(ci
, OP_ENDPTCTRL
+ num
, mask
, data
);
166 * hw_ep_get_halt: return endpoint halt status
167 * @num: endpoint number
168 * @dir: endpoint direction
170 * This function returns 1 if endpoint halted
172 static int hw_ep_get_halt(struct ci_hdrc
*ci
, int num
, int dir
)
174 u32 mask
= dir
? ENDPTCTRL_TXS
: ENDPTCTRL_RXS
;
176 return hw_read(ci
, OP_ENDPTCTRL
+ num
, mask
) ? 1 : 0;
180 * hw_ep_prime: primes endpoint (execute without interruption)
181 * @num: endpoint number
182 * @dir: endpoint direction
183 * @is_ctrl: true if control endpoint
185 * This function returns an error code
187 static int hw_ep_prime(struct ci_hdrc
*ci
, int num
, int dir
, int is_ctrl
)
189 int n
= hw_ep_bit(num
, dir
);
191 if (is_ctrl
&& dir
== RX
&& hw_read(ci
, OP_ENDPTSETUPSTAT
, BIT(num
)))
194 hw_write(ci
, OP_ENDPTPRIME
, ~0, BIT(n
));
196 while (hw_read(ci
, OP_ENDPTPRIME
, BIT(n
)))
198 if (is_ctrl
&& dir
== RX
&& hw_read(ci
, OP_ENDPTSETUPSTAT
, BIT(num
)))
201 /* status shoult be tested according with manual but it doesn't work */
206 * hw_ep_set_halt: configures ep halt & resets data toggle after clear (execute
207 * without interruption)
208 * @num: endpoint number
209 * @dir: endpoint direction
210 * @value: true => stall, false => unstall
212 * This function returns an error code
214 static int hw_ep_set_halt(struct ci_hdrc
*ci
, int num
, int dir
, int value
)
216 if (value
!= 0 && value
!= 1)
220 enum ci_hw_regs reg
= OP_ENDPTCTRL
+ num
;
221 u32 mask_xs
= dir
? ENDPTCTRL_TXS
: ENDPTCTRL_RXS
;
222 u32 mask_xr
= dir
? ENDPTCTRL_TXR
: ENDPTCTRL_RXR
;
224 /* data toggle - reserved for EP0 but it's in ESS */
225 hw_write(ci
, reg
, mask_xs
|mask_xr
,
226 value
? mask_xs
: mask_xr
);
227 } while (value
!= hw_ep_get_halt(ci
, num
, dir
));
233 * hw_is_port_high_speed: test if port is high speed
235 * This function returns true if high speed port
237 static int hw_port_is_high_speed(struct ci_hdrc
*ci
)
239 return ci
->hw_bank
.lpm
? hw_read(ci
, OP_DEVLC
, DEVLC_PSPD
) :
240 hw_read(ci
, OP_PORTSC
, PORTSC_HSP
);
244 * hw_test_and_clear_complete: test & clear complete status (execute without
246 * @n: endpoint number
248 * This function returns complete status
250 static int hw_test_and_clear_complete(struct ci_hdrc
*ci
, int n
)
252 n
= ep_to_bit(ci
, n
);
253 return hw_test_and_clear(ci
, OP_ENDPTCOMPLETE
, BIT(n
));
257 * hw_test_and_clear_intr_active: test & clear active interrupts (execute
258 * without interruption)
260 * This function returns active interrutps
262 static u32
hw_test_and_clear_intr_active(struct ci_hdrc
*ci
)
264 u32 reg
= hw_read_intr_status(ci
) & hw_read_intr_enable(ci
);
266 hw_write(ci
, OP_USBSTS
, ~0, reg
);
271 * hw_test_and_clear_setup_guard: test & clear setup guard (execute without
274 * This function returns guard value
276 static int hw_test_and_clear_setup_guard(struct ci_hdrc
*ci
)
278 return hw_test_and_write(ci
, OP_USBCMD
, USBCMD_SUTW
, 0);
282 * hw_test_and_set_setup_guard: test & set setup guard (execute without
285 * This function returns guard value
287 static int hw_test_and_set_setup_guard(struct ci_hdrc
*ci
)
289 return hw_test_and_write(ci
, OP_USBCMD
, USBCMD_SUTW
, USBCMD_SUTW
);
293 * hw_usb_set_address: configures USB address (execute without interruption)
294 * @value: new USB address
296 * This function explicitly sets the address, without the "USBADRA" (advance)
297 * feature, which is not supported by older versions of the controller.
299 static void hw_usb_set_address(struct ci_hdrc
*ci
, u8 value
)
301 hw_write(ci
, OP_DEVICEADDR
, DEVICEADDR_USBADR
,
302 value
<< __ffs(DEVICEADDR_USBADR
));
306 * hw_usb_reset: restart device after a bus reset (execute without
309 * This function returns an error code
311 static int hw_usb_reset(struct ci_hdrc
*ci
)
313 hw_usb_set_address(ci
, 0);
315 /* ESS flushes only at end?!? */
316 hw_write(ci
, OP_ENDPTFLUSH
, ~0, ~0);
318 /* clear setup token semaphores */
319 hw_write(ci
, OP_ENDPTSETUPSTAT
, 0, 0);
321 /* clear complete status */
322 hw_write(ci
, OP_ENDPTCOMPLETE
, 0, 0);
324 /* wait until all bits cleared */
325 while (hw_read(ci
, OP_ENDPTPRIME
, ~0))
326 udelay(10); /* not RTOS friendly */
328 /* reset all endpoints ? */
330 /* reset internal status and wait for further instructions
331 no need to verify the port reset status (ESS does it) */
336 /******************************************************************************
338 *****************************************************************************/
340 static int add_td_to_list(struct ci_hw_ep
*hwep
, struct ci_hw_req
*hwreq
,
345 struct td_node
*lastnode
, *node
= kzalloc(sizeof(struct td_node
),
351 node
->ptr
= dma_pool_zalloc(hwep
->td_pool
, GFP_ATOMIC
,
353 if (node
->ptr
== NULL
) {
358 node
->ptr
->token
= cpu_to_le32(length
<< __ffs(TD_TOTAL_BYTES
));
359 node
->ptr
->token
&= cpu_to_le32(TD_TOTAL_BYTES
);
360 node
->ptr
->token
|= cpu_to_le32(TD_STATUS_ACTIVE
);
361 if (hwep
->type
== USB_ENDPOINT_XFER_ISOC
&& hwep
->dir
== TX
) {
362 u32 mul
= hwreq
->req
.length
/ hwep
->ep
.maxpacket
;
364 if (hwreq
->req
.length
== 0
365 || hwreq
->req
.length
% hwep
->ep
.maxpacket
)
367 node
->ptr
->token
|= mul
<< __ffs(TD_MULTO
);
370 temp
= (u32
) (hwreq
->req
.dma
+ hwreq
->req
.actual
);
372 node
->ptr
->page
[0] = cpu_to_le32(temp
);
373 for (i
= 1; i
< TD_PAGE_COUNT
; i
++) {
374 u32 page
= temp
+ i
* CI_HDRC_PAGE_SIZE
;
375 page
&= ~TD_RESERVED_MASK
;
376 node
->ptr
->page
[i
] = cpu_to_le32(page
);
380 hwreq
->req
.actual
+= length
;
382 if (!list_empty(&hwreq
->tds
)) {
383 /* get the last entry */
384 lastnode
= list_entry(hwreq
->tds
.prev
,
386 lastnode
->ptr
->next
= cpu_to_le32(node
->dma
);
389 INIT_LIST_HEAD(&node
->td
);
390 list_add_tail(&node
->td
, &hwreq
->tds
);
396 * _usb_addr: calculates endpoint address from direction & number
399 static inline u8
_usb_addr(struct ci_hw_ep
*ep
)
401 return ((ep
->dir
== TX
) ? USB_ENDPOINT_DIR_MASK
: 0) | ep
->num
;
405 * _hardware_enqueue: configures a request at hardware level
409 * This function returns an error code
411 static int _hardware_enqueue(struct ci_hw_ep
*hwep
, struct ci_hw_req
*hwreq
)
413 struct ci_hdrc
*ci
= hwep
->ci
;
415 unsigned rest
= hwreq
->req
.length
;
416 int pages
= TD_PAGE_COUNT
;
417 struct td_node
*firstnode
, *lastnode
;
419 /* don't queue twice */
420 if (hwreq
->req
.status
== -EALREADY
)
423 hwreq
->req
.status
= -EALREADY
;
425 ret
= usb_gadget_map_request(&ci
->gadget
, &hwreq
->req
, hwep
->dir
);
430 * The first buffer could be not page aligned.
431 * In that case we have to span into one extra td.
433 if (hwreq
->req
.dma
% PAGE_SIZE
)
437 ret
= add_td_to_list(hwep
, hwreq
, 0);
443 unsigned count
= min(hwreq
->req
.length
- hwreq
->req
.actual
,
444 (unsigned)(pages
* CI_HDRC_PAGE_SIZE
));
445 ret
= add_td_to_list(hwep
, hwreq
, count
);
452 if (hwreq
->req
.zero
&& hwreq
->req
.length
&& hwep
->dir
== TX
453 && (hwreq
->req
.length
% hwep
->ep
.maxpacket
== 0)) {
454 ret
= add_td_to_list(hwep
, hwreq
, 0);
459 firstnode
= list_first_entry(&hwreq
->tds
, struct td_node
, td
);
461 lastnode
= list_entry(hwreq
->tds
.prev
,
464 lastnode
->ptr
->next
= cpu_to_le32(TD_TERMINATE
);
465 if (!hwreq
->req
.no_interrupt
)
466 lastnode
->ptr
->token
|= cpu_to_le32(TD_IOC
);
469 hwreq
->req
.actual
= 0;
470 if (!list_empty(&hwep
->qh
.queue
)) {
471 struct ci_hw_req
*hwreqprev
;
472 int n
= hw_ep_bit(hwep
->num
, hwep
->dir
);
474 struct td_node
*prevlastnode
;
475 u32 next
= firstnode
->dma
& TD_ADDR_MASK
;
477 hwreqprev
= list_entry(hwep
->qh
.queue
.prev
,
478 struct ci_hw_req
, queue
);
479 prevlastnode
= list_entry(hwreqprev
->tds
.prev
,
482 prevlastnode
->ptr
->next
= cpu_to_le32(next
);
484 if (hw_read(ci
, OP_ENDPTPRIME
, BIT(n
)))
487 hw_write(ci
, OP_USBCMD
, USBCMD_ATDTW
, USBCMD_ATDTW
);
488 tmp_stat
= hw_read(ci
, OP_ENDPTSTAT
, BIT(n
));
489 } while (!hw_read(ci
, OP_USBCMD
, USBCMD_ATDTW
));
490 hw_write(ci
, OP_USBCMD
, USBCMD_ATDTW
, 0);
495 /* QH configuration */
496 hwep
->qh
.ptr
->td
.next
= cpu_to_le32(firstnode
->dma
);
497 hwep
->qh
.ptr
->td
.token
&=
498 cpu_to_le32(~(TD_STATUS_HALTED
|TD_STATUS_ACTIVE
));
500 if (hwep
->type
== USB_ENDPOINT_XFER_ISOC
&& hwep
->dir
== RX
) {
501 u32 mul
= hwreq
->req
.length
/ hwep
->ep
.maxpacket
;
503 if (hwreq
->req
.length
== 0
504 || hwreq
->req
.length
% hwep
->ep
.maxpacket
)
506 hwep
->qh
.ptr
->cap
|= mul
<< __ffs(QH_MULT
);
509 wmb(); /* synchronize before ep prime */
511 ret
= hw_ep_prime(ci
, hwep
->num
, hwep
->dir
,
512 hwep
->type
== USB_ENDPOINT_XFER_CONTROL
);
518 * free_pending_td: remove a pending request for the endpoint
521 static void free_pending_td(struct ci_hw_ep
*hwep
)
523 struct td_node
*pending
= hwep
->pending_td
;
525 dma_pool_free(hwep
->td_pool
, pending
->ptr
, pending
->dma
);
526 hwep
->pending_td
= NULL
;
530 static int reprime_dtd(struct ci_hdrc
*ci
, struct ci_hw_ep
*hwep
,
531 struct td_node
*node
)
533 hwep
->qh
.ptr
->td
.next
= node
->dma
;
534 hwep
->qh
.ptr
->td
.token
&=
535 cpu_to_le32(~(TD_STATUS_HALTED
| TD_STATUS_ACTIVE
));
537 /* Synchronize before ep prime */
540 return hw_ep_prime(ci
, hwep
->num
, hwep
->dir
,
541 hwep
->type
== USB_ENDPOINT_XFER_CONTROL
);
545 * _hardware_dequeue: handles a request at hardware level
549 * This function returns an error code
551 static int _hardware_dequeue(struct ci_hw_ep
*hwep
, struct ci_hw_req
*hwreq
)
554 struct td_node
*node
, *tmpnode
;
555 unsigned remaining_length
;
556 unsigned actual
= hwreq
->req
.length
;
557 struct ci_hdrc
*ci
= hwep
->ci
;
559 if (hwreq
->req
.status
!= -EALREADY
)
562 hwreq
->req
.status
= 0;
564 list_for_each_entry_safe(node
, tmpnode
, &hwreq
->tds
, td
) {
565 tmptoken
= le32_to_cpu(node
->ptr
->token
);
566 if ((TD_STATUS_ACTIVE
& tmptoken
) != 0) {
567 int n
= hw_ep_bit(hwep
->num
, hwep
->dir
);
569 if (ci
->rev
== CI_REVISION_24
)
570 if (!hw_read(ci
, OP_ENDPTSTAT
, BIT(n
)))
571 reprime_dtd(ci
, hwep
, node
);
572 hwreq
->req
.status
= -EALREADY
;
576 remaining_length
= (tmptoken
& TD_TOTAL_BYTES
);
577 remaining_length
>>= __ffs(TD_TOTAL_BYTES
);
578 actual
-= remaining_length
;
580 hwreq
->req
.status
= tmptoken
& TD_STATUS
;
581 if ((TD_STATUS_HALTED
& hwreq
->req
.status
)) {
582 hwreq
->req
.status
= -EPIPE
;
584 } else if ((TD_STATUS_DT_ERR
& hwreq
->req
.status
)) {
585 hwreq
->req
.status
= -EPROTO
;
587 } else if ((TD_STATUS_TR_ERR
& hwreq
->req
.status
)) {
588 hwreq
->req
.status
= -EILSEQ
;
592 if (remaining_length
) {
594 hwreq
->req
.status
= -EPROTO
;
599 * As the hardware could still address the freed td
600 * which will run the udc unusable, the cleanup of the
601 * td has to be delayed by one.
603 if (hwep
->pending_td
)
604 free_pending_td(hwep
);
606 hwep
->pending_td
= node
;
607 list_del_init(&node
->td
);
610 usb_gadget_unmap_request(&hwep
->ci
->gadget
, &hwreq
->req
, hwep
->dir
);
612 hwreq
->req
.actual
+= actual
;
614 if (hwreq
->req
.status
)
615 return hwreq
->req
.status
;
617 return hwreq
->req
.actual
;
621 * _ep_nuke: dequeues all endpoint requests
624 * This function returns an error code
625 * Caller must hold lock
627 static int _ep_nuke(struct ci_hw_ep
*hwep
)
628 __releases(hwep
->lock
)
629 __acquires(hwep
->lock
)
631 struct td_node
*node
, *tmpnode
;
635 hw_ep_flush(hwep
->ci
, hwep
->num
, hwep
->dir
);
637 while (!list_empty(&hwep
->qh
.queue
)) {
639 /* pop oldest request */
640 struct ci_hw_req
*hwreq
= list_entry(hwep
->qh
.queue
.next
,
641 struct ci_hw_req
, queue
);
643 list_for_each_entry_safe(node
, tmpnode
, &hwreq
->tds
, td
) {
644 dma_pool_free(hwep
->td_pool
, node
->ptr
, node
->dma
);
645 list_del_init(&node
->td
);
650 list_del_init(&hwreq
->queue
);
651 hwreq
->req
.status
= -ESHUTDOWN
;
653 if (hwreq
->req
.complete
!= NULL
) {
654 spin_unlock(hwep
->lock
);
655 usb_gadget_giveback_request(&hwep
->ep
, &hwreq
->req
);
656 spin_lock(hwep
->lock
);
660 if (hwep
->pending_td
)
661 free_pending_td(hwep
);
666 static int _ep_set_halt(struct usb_ep
*ep
, int value
, bool check_transfer
)
668 struct ci_hw_ep
*hwep
= container_of(ep
, struct ci_hw_ep
, ep
);
669 int direction
, retval
= 0;
672 if (ep
== NULL
|| hwep
->ep
.desc
== NULL
)
675 if (usb_endpoint_xfer_isoc(hwep
->ep
.desc
))
678 spin_lock_irqsave(hwep
->lock
, flags
);
680 if (value
&& hwep
->dir
== TX
&& check_transfer
&&
681 !list_empty(&hwep
->qh
.queue
) &&
682 !usb_endpoint_xfer_control(hwep
->ep
.desc
)) {
683 spin_unlock_irqrestore(hwep
->lock
, flags
);
687 direction
= hwep
->dir
;
689 retval
|= hw_ep_set_halt(hwep
->ci
, hwep
->num
, hwep
->dir
, value
);
694 if (hwep
->type
== USB_ENDPOINT_XFER_CONTROL
)
695 hwep
->dir
= (hwep
->dir
== TX
) ? RX
: TX
;
697 } while (hwep
->dir
!= direction
);
699 spin_unlock_irqrestore(hwep
->lock
, flags
);
705 * _gadget_stop_activity: stops all USB activity, flushes & disables all endpts
708 * This function returns an error code
710 static int _gadget_stop_activity(struct usb_gadget
*gadget
)
713 struct ci_hdrc
*ci
= container_of(gadget
, struct ci_hdrc
, gadget
);
716 spin_lock_irqsave(&ci
->lock
, flags
);
717 ci
->gadget
.speed
= USB_SPEED_UNKNOWN
;
718 ci
->remote_wakeup
= 0;
720 spin_unlock_irqrestore(&ci
->lock
, flags
);
722 /* flush all endpoints */
723 gadget_for_each_ep(ep
, gadget
) {
724 usb_ep_fifo_flush(ep
);
726 usb_ep_fifo_flush(&ci
->ep0out
->ep
);
727 usb_ep_fifo_flush(&ci
->ep0in
->ep
);
729 /* make sure to disable all endpoints */
730 gadget_for_each_ep(ep
, gadget
) {
734 if (ci
->status
!= NULL
) {
735 usb_ep_free_request(&ci
->ep0in
->ep
, ci
->status
);
742 /******************************************************************************
744 *****************************************************************************/
746 * isr_reset_handler: USB reset interrupt handler
749 * This function resets USB engine after a bus reset occurred
751 static void isr_reset_handler(struct ci_hdrc
*ci
)
757 spin_unlock(&ci
->lock
);
758 if (ci
->gadget
.speed
!= USB_SPEED_UNKNOWN
)
759 usb_gadget_udc_reset(&ci
->gadget
, ci
->driver
);
761 retval
= _gadget_stop_activity(&ci
->gadget
);
765 retval
= hw_usb_reset(ci
);
769 ci
->status
= usb_ep_alloc_request(&ci
->ep0in
->ep
, GFP_ATOMIC
);
770 if (ci
->status
== NULL
)
774 spin_lock(&ci
->lock
);
777 dev_err(ci
->dev
, "error: %i\n", retval
);
781 * isr_get_status_complete: get_status request complete function
783 * @req: request handled
785 * Caller must release lock
787 static void isr_get_status_complete(struct usb_ep
*ep
, struct usb_request
*req
)
789 if (ep
== NULL
|| req
== NULL
)
793 usb_ep_free_request(ep
, req
);
797 * _ep_queue: queues (submits) an I/O request to an endpoint
800 * @gfp_flags: GFP flags (not used)
802 * Caller must hold lock
803 * This function returns an error code
805 static int _ep_queue(struct usb_ep
*ep
, struct usb_request
*req
,
806 gfp_t __maybe_unused gfp_flags
)
808 struct ci_hw_ep
*hwep
= container_of(ep
, struct ci_hw_ep
, ep
);
809 struct ci_hw_req
*hwreq
= container_of(req
, struct ci_hw_req
, req
);
810 struct ci_hdrc
*ci
= hwep
->ci
;
813 if (ep
== NULL
|| req
== NULL
|| hwep
->ep
.desc
== NULL
)
816 if (hwep
->type
== USB_ENDPOINT_XFER_CONTROL
) {
818 hwep
= (ci
->ep0_dir
== RX
) ?
819 ci
->ep0out
: ci
->ep0in
;
820 if (!list_empty(&hwep
->qh
.queue
)) {
822 dev_warn(hwep
->ci
->dev
, "endpoint ctrl %X nuked\n",
827 if (usb_endpoint_xfer_isoc(hwep
->ep
.desc
) &&
828 hwreq
->req
.length
> (1 + hwep
->ep
.mult
) * hwep
->ep
.maxpacket
) {
829 dev_err(hwep
->ci
->dev
, "request length too big for isochronous\n");
833 /* first nuke then test link, e.g. previous status has not sent */
834 if (!list_empty(&hwreq
->queue
)) {
835 dev_err(hwep
->ci
->dev
, "request already in queue\n");
840 hwreq
->req
.status
= -EINPROGRESS
;
841 hwreq
->req
.actual
= 0;
843 retval
= _hardware_enqueue(hwep
, hwreq
);
845 if (retval
== -EALREADY
)
848 list_add_tail(&hwreq
->queue
, &hwep
->qh
.queue
);
854 * isr_get_status_response: get_status request response
856 * @setup: setup request packet
858 * This function returns an error code
860 static int isr_get_status_response(struct ci_hdrc
*ci
,
861 struct usb_ctrlrequest
*setup
)
862 __releases(hwep
->lock
)
863 __acquires(hwep
->lock
)
865 struct ci_hw_ep
*hwep
= ci
->ep0in
;
866 struct usb_request
*req
= NULL
;
867 gfp_t gfp_flags
= GFP_ATOMIC
;
868 int dir
, num
, retval
;
870 if (hwep
== NULL
|| setup
== NULL
)
873 spin_unlock(hwep
->lock
);
874 req
= usb_ep_alloc_request(&hwep
->ep
, gfp_flags
);
875 spin_lock(hwep
->lock
);
879 req
->complete
= isr_get_status_complete
;
881 req
->buf
= kzalloc(req
->length
, gfp_flags
);
882 if (req
->buf
== NULL
) {
887 if ((setup
->bRequestType
& USB_RECIP_MASK
) == USB_RECIP_DEVICE
) {
888 *(u16
*)req
->buf
= (ci
->remote_wakeup
<< 1) |
889 ci
->gadget
.is_selfpowered
;
890 } else if ((setup
->bRequestType
& USB_RECIP_MASK
) \
891 == USB_RECIP_ENDPOINT
) {
892 dir
= (le16_to_cpu(setup
->wIndex
) & USB_ENDPOINT_DIR_MASK
) ?
894 num
= le16_to_cpu(setup
->wIndex
) & USB_ENDPOINT_NUMBER_MASK
;
895 *(u16
*)req
->buf
= hw_ep_get_halt(ci
, num
, dir
);
897 /* else do nothing; reserved for future use */
899 retval
= _ep_queue(&hwep
->ep
, req
, gfp_flags
);
908 spin_unlock(hwep
->lock
);
909 usb_ep_free_request(&hwep
->ep
, req
);
910 spin_lock(hwep
->lock
);
915 * isr_setup_status_complete: setup_status request complete function
917 * @req: request handled
919 * Caller must release lock. Put the port in test mode if test mode
920 * feature is selected.
923 isr_setup_status_complete(struct usb_ep
*ep
, struct usb_request
*req
)
925 struct ci_hdrc
*ci
= req
->context
;
929 hw_usb_set_address(ci
, ci
->address
);
932 usb_gadget_set_state(&ci
->gadget
, USB_STATE_ADDRESS
);
935 spin_lock_irqsave(&ci
->lock
, flags
);
937 hw_port_test_set(ci
, ci
->test_mode
);
938 spin_unlock_irqrestore(&ci
->lock
, flags
);
942 * isr_setup_status_phase: queues the status phase of a setup transation
945 * This function returns an error code
947 static int isr_setup_status_phase(struct ci_hdrc
*ci
)
950 struct ci_hw_ep
*hwep
;
952 hwep
= (ci
->ep0_dir
== TX
) ? ci
->ep0out
: ci
->ep0in
;
953 ci
->status
->context
= ci
;
954 ci
->status
->complete
= isr_setup_status_complete
;
956 retval
= _ep_queue(&hwep
->ep
, ci
->status
, GFP_ATOMIC
);
962 * isr_tr_complete_low: transaction complete low level handler
965 * This function returns an error code
966 * Caller must hold lock
968 static int isr_tr_complete_low(struct ci_hw_ep
*hwep
)
969 __releases(hwep
->lock
)
970 __acquires(hwep
->lock
)
972 struct ci_hw_req
*hwreq
, *hwreqtemp
;
973 struct ci_hw_ep
*hweptemp
= hwep
;
976 list_for_each_entry_safe(hwreq
, hwreqtemp
, &hwep
->qh
.queue
,
978 retval
= _hardware_dequeue(hwep
, hwreq
);
981 list_del_init(&hwreq
->queue
);
982 if (hwreq
->req
.complete
!= NULL
) {
983 spin_unlock(hwep
->lock
);
984 if ((hwep
->type
== USB_ENDPOINT_XFER_CONTROL
) &&
986 hweptemp
= hwep
->ci
->ep0in
;
987 usb_gadget_giveback_request(&hweptemp
->ep
, &hwreq
->req
);
988 spin_lock(hwep
->lock
);
992 if (retval
== -EBUSY
)
998 static int otg_a_alt_hnp_support(struct ci_hdrc
*ci
)
1000 dev_warn(&ci
->gadget
.dev
,
1001 "connect the device to an alternate port if you want HNP\n");
1002 return isr_setup_status_phase(ci
);
1006 * isr_setup_packet_handler: setup packet handler
1007 * @ci: UDC descriptor
1009 * This function handles setup packet
1011 static void isr_setup_packet_handler(struct ci_hdrc
*ci
)
1012 __releases(ci
->lock
)
1013 __acquires(ci
->lock
)
1015 struct ci_hw_ep
*hwep
= &ci
->ci_hw_ep
[0];
1016 struct usb_ctrlrequest req
;
1017 int type
, num
, dir
, err
= -EINVAL
;
1021 * Flush data and handshake transactions of previous
1024 _ep_nuke(ci
->ep0out
);
1025 _ep_nuke(ci
->ep0in
);
1027 /* read_setup_packet */
1029 hw_test_and_set_setup_guard(ci
);
1030 memcpy(&req
, &hwep
->qh
.ptr
->setup
, sizeof(req
));
1031 } while (!hw_test_and_clear_setup_guard(ci
));
1033 type
= req
.bRequestType
;
1035 ci
->ep0_dir
= (type
& USB_DIR_IN
) ? TX
: RX
;
1037 switch (req
.bRequest
) {
1038 case USB_REQ_CLEAR_FEATURE
:
1039 if (type
== (USB_DIR_OUT
|USB_RECIP_ENDPOINT
) &&
1040 le16_to_cpu(req
.wValue
) ==
1041 USB_ENDPOINT_HALT
) {
1042 if (req
.wLength
!= 0)
1044 num
= le16_to_cpu(req
.wIndex
);
1045 dir
= num
& USB_ENDPOINT_DIR_MASK
;
1046 num
&= USB_ENDPOINT_NUMBER_MASK
;
1048 num
+= ci
->hw_ep_max
/ 2;
1049 if (!ci
->ci_hw_ep
[num
].wedge
) {
1050 spin_unlock(&ci
->lock
);
1051 err
= usb_ep_clear_halt(
1052 &ci
->ci_hw_ep
[num
].ep
);
1053 spin_lock(&ci
->lock
);
1057 err
= isr_setup_status_phase(ci
);
1058 } else if (type
== (USB_DIR_OUT
|USB_RECIP_DEVICE
) &&
1059 le16_to_cpu(req
.wValue
) ==
1060 USB_DEVICE_REMOTE_WAKEUP
) {
1061 if (req
.wLength
!= 0)
1063 ci
->remote_wakeup
= 0;
1064 err
= isr_setup_status_phase(ci
);
1069 case USB_REQ_GET_STATUS
:
1070 if ((type
!= (USB_DIR_IN
|USB_RECIP_DEVICE
) ||
1071 le16_to_cpu(req
.wIndex
) == OTG_STS_SELECTOR
) &&
1072 type
!= (USB_DIR_IN
|USB_RECIP_ENDPOINT
) &&
1073 type
!= (USB_DIR_IN
|USB_RECIP_INTERFACE
))
1075 if (le16_to_cpu(req
.wLength
) != 2 ||
1076 le16_to_cpu(req
.wValue
) != 0)
1078 err
= isr_get_status_response(ci
, &req
);
1080 case USB_REQ_SET_ADDRESS
:
1081 if (type
!= (USB_DIR_OUT
|USB_RECIP_DEVICE
))
1083 if (le16_to_cpu(req
.wLength
) != 0 ||
1084 le16_to_cpu(req
.wIndex
) != 0)
1086 ci
->address
= (u8
)le16_to_cpu(req
.wValue
);
1088 err
= isr_setup_status_phase(ci
);
1090 case USB_REQ_SET_FEATURE
:
1091 if (type
== (USB_DIR_OUT
|USB_RECIP_ENDPOINT
) &&
1092 le16_to_cpu(req
.wValue
) ==
1093 USB_ENDPOINT_HALT
) {
1094 if (req
.wLength
!= 0)
1096 num
= le16_to_cpu(req
.wIndex
);
1097 dir
= num
& USB_ENDPOINT_DIR_MASK
;
1098 num
&= USB_ENDPOINT_NUMBER_MASK
;
1100 num
+= ci
->hw_ep_max
/ 2;
1102 spin_unlock(&ci
->lock
);
1103 err
= _ep_set_halt(&ci
->ci_hw_ep
[num
].ep
, 1, false);
1104 spin_lock(&ci
->lock
);
1106 isr_setup_status_phase(ci
);
1107 } else if (type
== (USB_DIR_OUT
|USB_RECIP_DEVICE
)) {
1108 if (req
.wLength
!= 0)
1110 switch (le16_to_cpu(req
.wValue
)) {
1111 case USB_DEVICE_REMOTE_WAKEUP
:
1112 ci
->remote_wakeup
= 1;
1113 err
= isr_setup_status_phase(ci
);
1115 case USB_DEVICE_TEST_MODE
:
1116 tmode
= le16_to_cpu(req
.wIndex
) >> 8;
1123 ci
->test_mode
= tmode
;
1124 err
= isr_setup_status_phase(
1131 case USB_DEVICE_B_HNP_ENABLE
:
1132 if (ci_otg_is_fsm_mode(ci
)) {
1133 ci
->gadget
.b_hnp_enable
= 1;
1134 err
= isr_setup_status_phase(
1138 case USB_DEVICE_A_ALT_HNP_SUPPORT
:
1139 if (ci_otg_is_fsm_mode(ci
))
1140 err
= otg_a_alt_hnp_support(ci
);
1142 case USB_DEVICE_A_HNP_SUPPORT
:
1143 if (ci_otg_is_fsm_mode(ci
)) {
1144 ci
->gadget
.a_hnp_support
= 1;
1145 err
= isr_setup_status_phase(
1158 if (req
.wLength
== 0) /* no data phase */
1161 spin_unlock(&ci
->lock
);
1162 err
= ci
->driver
->setup(&ci
->gadget
, &req
);
1163 spin_lock(&ci
->lock
);
1168 spin_unlock(&ci
->lock
);
1169 if (_ep_set_halt(&hwep
->ep
, 1, false))
1170 dev_err(ci
->dev
, "error: _ep_set_halt\n");
1171 spin_lock(&ci
->lock
);
1176 * isr_tr_complete_handler: transaction complete interrupt handler
1177 * @ci: UDC descriptor
1179 * This function handles traffic events
1181 static void isr_tr_complete_handler(struct ci_hdrc
*ci
)
1182 __releases(ci
->lock
)
1183 __acquires(ci
->lock
)
1188 for (i
= 0; i
< ci
->hw_ep_max
; i
++) {
1189 struct ci_hw_ep
*hwep
= &ci
->ci_hw_ep
[i
];
1191 if (hwep
->ep
.desc
== NULL
)
1192 continue; /* not configured */
1194 if (hw_test_and_clear_complete(ci
, i
)) {
1195 err
= isr_tr_complete_low(hwep
);
1196 if (hwep
->type
== USB_ENDPOINT_XFER_CONTROL
) {
1197 if (err
> 0) /* needs status phase */
1198 err
= isr_setup_status_phase(ci
);
1200 spin_unlock(&ci
->lock
);
1201 if (_ep_set_halt(&hwep
->ep
, 1, false))
1203 "error: _ep_set_halt\n");
1204 spin_lock(&ci
->lock
);
1209 /* Only handle setup packet below */
1211 hw_test_and_clear(ci
, OP_ENDPTSETUPSTAT
, BIT(0)))
1212 isr_setup_packet_handler(ci
);
1216 /******************************************************************************
1218 *****************************************************************************/
1220 * ep_enable: configure endpoint, making it usable
1222 * Check usb_ep_enable() at "usb_gadget.h" for details
1224 static int ep_enable(struct usb_ep
*ep
,
1225 const struct usb_endpoint_descriptor
*desc
)
1227 struct ci_hw_ep
*hwep
= container_of(ep
, struct ci_hw_ep
, ep
);
1229 unsigned long flags
;
1232 if (ep
== NULL
|| desc
== NULL
)
1235 spin_lock_irqsave(hwep
->lock
, flags
);
1237 /* only internal SW should enable ctrl endpts */
1239 if (!list_empty(&hwep
->qh
.queue
)) {
1240 dev_warn(hwep
->ci
->dev
, "enabling a non-empty endpoint!\n");
1241 spin_unlock_irqrestore(hwep
->lock
, flags
);
1245 hwep
->ep
.desc
= desc
;
1247 hwep
->dir
= usb_endpoint_dir_in(desc
) ? TX
: RX
;
1248 hwep
->num
= usb_endpoint_num(desc
);
1249 hwep
->type
= usb_endpoint_type(desc
);
1251 hwep
->ep
.maxpacket
= usb_endpoint_maxp(desc
) & 0x07ff;
1252 hwep
->ep
.mult
= QH_ISO_MULT(usb_endpoint_maxp(desc
));
1254 if (hwep
->type
== USB_ENDPOINT_XFER_CONTROL
)
1258 cap
|= (hwep
->ep
.maxpacket
<< __ffs(QH_MAX_PKT
)) & QH_MAX_PKT
;
1260 * For ISO-TX, we set mult at QH as the largest value, and use
1261 * MultO at TD as real mult value.
1263 if (hwep
->type
== USB_ENDPOINT_XFER_ISOC
&& hwep
->dir
== TX
)
1264 cap
|= 3 << __ffs(QH_MULT
);
1266 hwep
->qh
.ptr
->cap
= cpu_to_le32(cap
);
1268 hwep
->qh
.ptr
->td
.next
|= cpu_to_le32(TD_TERMINATE
); /* needed? */
1270 if (hwep
->num
!= 0 && hwep
->type
== USB_ENDPOINT_XFER_CONTROL
) {
1271 dev_err(hwep
->ci
->dev
, "Set control xfer at non-ep0\n");
1276 * Enable endpoints in the HW other than ep0 as ep0
1280 retval
|= hw_ep_enable(hwep
->ci
, hwep
->num
, hwep
->dir
,
1283 spin_unlock_irqrestore(hwep
->lock
, flags
);
1288 * ep_disable: endpoint is no longer usable
1290 * Check usb_ep_disable() at "usb_gadget.h" for details
1292 static int ep_disable(struct usb_ep
*ep
)
1294 struct ci_hw_ep
*hwep
= container_of(ep
, struct ci_hw_ep
, ep
);
1295 int direction
, retval
= 0;
1296 unsigned long flags
;
1300 else if (hwep
->ep
.desc
== NULL
)
1303 spin_lock_irqsave(hwep
->lock
, flags
);
1305 /* only internal SW should disable ctrl endpts */
1307 direction
= hwep
->dir
;
1309 retval
|= _ep_nuke(hwep
);
1310 retval
|= hw_ep_disable(hwep
->ci
, hwep
->num
, hwep
->dir
);
1312 if (hwep
->type
== USB_ENDPOINT_XFER_CONTROL
)
1313 hwep
->dir
= (hwep
->dir
== TX
) ? RX
: TX
;
1315 } while (hwep
->dir
!= direction
);
1317 hwep
->ep
.desc
= NULL
;
1319 spin_unlock_irqrestore(hwep
->lock
, flags
);
1324 * ep_alloc_request: allocate a request object to use with this endpoint
1326 * Check usb_ep_alloc_request() at "usb_gadget.h" for details
1328 static struct usb_request
*ep_alloc_request(struct usb_ep
*ep
, gfp_t gfp_flags
)
1330 struct ci_hw_req
*hwreq
= NULL
;
1335 hwreq
= kzalloc(sizeof(struct ci_hw_req
), gfp_flags
);
1336 if (hwreq
!= NULL
) {
1337 INIT_LIST_HEAD(&hwreq
->queue
);
1338 INIT_LIST_HEAD(&hwreq
->tds
);
1341 return (hwreq
== NULL
) ? NULL
: &hwreq
->req
;
1345 * ep_free_request: frees a request object
1347 * Check usb_ep_free_request() at "usb_gadget.h" for details
1349 static void ep_free_request(struct usb_ep
*ep
, struct usb_request
*req
)
1351 struct ci_hw_ep
*hwep
= container_of(ep
, struct ci_hw_ep
, ep
);
1352 struct ci_hw_req
*hwreq
= container_of(req
, struct ci_hw_req
, req
);
1353 struct td_node
*node
, *tmpnode
;
1354 unsigned long flags
;
1356 if (ep
== NULL
|| req
== NULL
) {
1358 } else if (!list_empty(&hwreq
->queue
)) {
1359 dev_err(hwep
->ci
->dev
, "freeing queued request\n");
1363 spin_lock_irqsave(hwep
->lock
, flags
);
1365 list_for_each_entry_safe(node
, tmpnode
, &hwreq
->tds
, td
) {
1366 dma_pool_free(hwep
->td_pool
, node
->ptr
, node
->dma
);
1367 list_del_init(&node
->td
);
1374 spin_unlock_irqrestore(hwep
->lock
, flags
);
1378 * ep_queue: queues (submits) an I/O request to an endpoint
1380 * Check usb_ep_queue()* at usb_gadget.h" for details
1382 static int ep_queue(struct usb_ep
*ep
, struct usb_request
*req
,
1383 gfp_t __maybe_unused gfp_flags
)
1385 struct ci_hw_ep
*hwep
= container_of(ep
, struct ci_hw_ep
, ep
);
1387 unsigned long flags
;
1389 if (ep
== NULL
|| req
== NULL
|| hwep
->ep
.desc
== NULL
)
1392 spin_lock_irqsave(hwep
->lock
, flags
);
1393 retval
= _ep_queue(ep
, req
, gfp_flags
);
1394 spin_unlock_irqrestore(hwep
->lock
, flags
);
1399 * ep_dequeue: dequeues (cancels, unlinks) an I/O request from an endpoint
1401 * Check usb_ep_dequeue() at "usb_gadget.h" for details
1403 static int ep_dequeue(struct usb_ep
*ep
, struct usb_request
*req
)
1405 struct ci_hw_ep
*hwep
= container_of(ep
, struct ci_hw_ep
, ep
);
1406 struct ci_hw_req
*hwreq
= container_of(req
, struct ci_hw_req
, req
);
1407 unsigned long flags
;
1408 struct td_node
*node
, *tmpnode
;
1410 if (ep
== NULL
|| req
== NULL
|| hwreq
->req
.status
!= -EALREADY
||
1411 hwep
->ep
.desc
== NULL
|| list_empty(&hwreq
->queue
) ||
1412 list_empty(&hwep
->qh
.queue
))
1415 spin_lock_irqsave(hwep
->lock
, flags
);
1417 hw_ep_flush(hwep
->ci
, hwep
->num
, hwep
->dir
);
1419 list_for_each_entry_safe(node
, tmpnode
, &hwreq
->tds
, td
) {
1420 dma_pool_free(hwep
->td_pool
, node
->ptr
, node
->dma
);
1421 list_del(&node
->td
);
1426 list_del_init(&hwreq
->queue
);
1428 usb_gadget_unmap_request(&hwep
->ci
->gadget
, req
, hwep
->dir
);
1430 req
->status
= -ECONNRESET
;
1432 if (hwreq
->req
.complete
!= NULL
) {
1433 spin_unlock(hwep
->lock
);
1434 usb_gadget_giveback_request(&hwep
->ep
, &hwreq
->req
);
1435 spin_lock(hwep
->lock
);
1438 spin_unlock_irqrestore(hwep
->lock
, flags
);
1443 * ep_set_halt: sets the endpoint halt feature
1445 * Check usb_ep_set_halt() at "usb_gadget.h" for details
1447 static int ep_set_halt(struct usb_ep
*ep
, int value
)
1449 return _ep_set_halt(ep
, value
, true);
1453 * ep_set_wedge: sets the halt feature and ignores clear requests
1455 * Check usb_ep_set_wedge() at "usb_gadget.h" for details
1457 static int ep_set_wedge(struct usb_ep
*ep
)
1459 struct ci_hw_ep
*hwep
= container_of(ep
, struct ci_hw_ep
, ep
);
1460 unsigned long flags
;
1462 if (ep
== NULL
|| hwep
->ep
.desc
== NULL
)
1465 spin_lock_irqsave(hwep
->lock
, flags
);
1467 spin_unlock_irqrestore(hwep
->lock
, flags
);
1469 return usb_ep_set_halt(ep
);
1473 * ep_fifo_flush: flushes contents of a fifo
1475 * Check usb_ep_fifo_flush() at "usb_gadget.h" for details
1477 static void ep_fifo_flush(struct usb_ep
*ep
)
1479 struct ci_hw_ep
*hwep
= container_of(ep
, struct ci_hw_ep
, ep
);
1480 unsigned long flags
;
1483 dev_err(hwep
->ci
->dev
, "%02X: -EINVAL\n", _usb_addr(hwep
));
1487 spin_lock_irqsave(hwep
->lock
, flags
);
1489 hw_ep_flush(hwep
->ci
, hwep
->num
, hwep
->dir
);
1491 spin_unlock_irqrestore(hwep
->lock
, flags
);
1495 * Endpoint-specific part of the API to the USB controller hardware
1496 * Check "usb_gadget.h" for details
1498 static const struct usb_ep_ops usb_ep_ops
= {
1499 .enable
= ep_enable
,
1500 .disable
= ep_disable
,
1501 .alloc_request
= ep_alloc_request
,
1502 .free_request
= ep_free_request
,
1504 .dequeue
= ep_dequeue
,
1505 .set_halt
= ep_set_halt
,
1506 .set_wedge
= ep_set_wedge
,
1507 .fifo_flush
= ep_fifo_flush
,
1510 /******************************************************************************
1512 *****************************************************************************/
1513 static int ci_udc_vbus_session(struct usb_gadget
*_gadget
, int is_active
)
1515 struct ci_hdrc
*ci
= container_of(_gadget
, struct ci_hdrc
, gadget
);
1516 unsigned long flags
;
1517 int gadget_ready
= 0;
1519 spin_lock_irqsave(&ci
->lock
, flags
);
1520 ci
->vbus_active
= is_active
;
1523 spin_unlock_irqrestore(&ci
->lock
, flags
);
1527 pm_runtime_get_sync(&_gadget
->dev
);
1528 hw_device_reset(ci
);
1529 hw_device_state(ci
, ci
->ep0out
->qh
.dma
);
1530 usb_gadget_set_state(_gadget
, USB_STATE_POWERED
);
1531 usb_udc_vbus_handler(_gadget
, true);
1533 usb_udc_vbus_handler(_gadget
, false);
1535 ci
->driver
->disconnect(&ci
->gadget
);
1536 hw_device_state(ci
, 0);
1537 if (ci
->platdata
->notify_event
)
1538 ci
->platdata
->notify_event(ci
,
1539 CI_HDRC_CONTROLLER_STOPPED_EVENT
);
1540 _gadget_stop_activity(&ci
->gadget
);
1541 pm_runtime_put_sync(&_gadget
->dev
);
1542 usb_gadget_set_state(_gadget
, USB_STATE_NOTATTACHED
);
1549 static int ci_udc_wakeup(struct usb_gadget
*_gadget
)
1551 struct ci_hdrc
*ci
= container_of(_gadget
, struct ci_hdrc
, gadget
);
1552 unsigned long flags
;
1555 spin_lock_irqsave(&ci
->lock
, flags
);
1556 if (!ci
->remote_wakeup
) {
1560 if (!hw_read(ci
, OP_PORTSC
, PORTSC_SUSP
)) {
1564 hw_write(ci
, OP_PORTSC
, PORTSC_FPR
, PORTSC_FPR
);
1566 spin_unlock_irqrestore(&ci
->lock
, flags
);
1570 static int ci_udc_vbus_draw(struct usb_gadget
*_gadget
, unsigned ma
)
1572 struct ci_hdrc
*ci
= container_of(_gadget
, struct ci_hdrc
, gadget
);
1575 return usb_phy_set_power(ci
->usb_phy
, ma
);
1579 static int ci_udc_selfpowered(struct usb_gadget
*_gadget
, int is_on
)
1581 struct ci_hdrc
*ci
= container_of(_gadget
, struct ci_hdrc
, gadget
);
1582 struct ci_hw_ep
*hwep
= ci
->ep0in
;
1583 unsigned long flags
;
1585 spin_lock_irqsave(hwep
->lock
, flags
);
1586 _gadget
->is_selfpowered
= (is_on
!= 0);
1587 spin_unlock_irqrestore(hwep
->lock
, flags
);
1592 /* Change Data+ pullup status
1593 * this func is used by usb_gadget_connect/disconnet
1595 static int ci_udc_pullup(struct usb_gadget
*_gadget
, int is_on
)
1597 struct ci_hdrc
*ci
= container_of(_gadget
, struct ci_hdrc
, gadget
);
1599 /* Data+ pullup controlled by OTG state machine in OTG fsm mode */
1600 if (ci_otg_is_fsm_mode(ci
))
1603 pm_runtime_get_sync(&ci
->gadget
.dev
);
1605 hw_write(ci
, OP_USBCMD
, USBCMD_RS
, USBCMD_RS
);
1607 hw_write(ci
, OP_USBCMD
, USBCMD_RS
, 0);
1608 pm_runtime_put_sync(&ci
->gadget
.dev
);
1613 static int ci_udc_start(struct usb_gadget
*gadget
,
1614 struct usb_gadget_driver
*driver
);
1615 static int ci_udc_stop(struct usb_gadget
*gadget
);
1617 * Device operations part of the API to the USB controller hardware,
1618 * which don't involve endpoints (or i/o)
1619 * Check "usb_gadget.h" for details
1621 static const struct usb_gadget_ops usb_gadget_ops
= {
1622 .vbus_session
= ci_udc_vbus_session
,
1623 .wakeup
= ci_udc_wakeup
,
1624 .set_selfpowered
= ci_udc_selfpowered
,
1625 .pullup
= ci_udc_pullup
,
1626 .vbus_draw
= ci_udc_vbus_draw
,
1627 .udc_start
= ci_udc_start
,
1628 .udc_stop
= ci_udc_stop
,
1631 static int init_eps(struct ci_hdrc
*ci
)
1633 int retval
= 0, i
, j
;
1635 for (i
= 0; i
< ci
->hw_ep_max
/2; i
++)
1636 for (j
= RX
; j
<= TX
; j
++) {
1637 int k
= i
+ j
* ci
->hw_ep_max
/2;
1638 struct ci_hw_ep
*hwep
= &ci
->ci_hw_ep
[k
];
1640 scnprintf(hwep
->name
, sizeof(hwep
->name
), "ep%i%s", i
,
1641 (j
== TX
) ? "in" : "out");
1644 hwep
->lock
= &ci
->lock
;
1645 hwep
->td_pool
= ci
->td_pool
;
1647 hwep
->ep
.name
= hwep
->name
;
1648 hwep
->ep
.ops
= &usb_ep_ops
;
1651 hwep
->ep
.caps
.type_control
= true;
1653 hwep
->ep
.caps
.type_iso
= true;
1654 hwep
->ep
.caps
.type_bulk
= true;
1655 hwep
->ep
.caps
.type_int
= true;
1659 hwep
->ep
.caps
.dir_in
= true;
1661 hwep
->ep
.caps
.dir_out
= true;
1664 * for ep0: maxP defined in desc, for other
1665 * eps, maxP is set by epautoconfig() called
1668 usb_ep_set_maxpacket_limit(&hwep
->ep
, (unsigned short)~0);
1670 INIT_LIST_HEAD(&hwep
->qh
.queue
);
1671 hwep
->qh
.ptr
= dma_pool_alloc(ci
->qh_pool
, GFP_KERNEL
,
1673 if (hwep
->qh
.ptr
== NULL
)
1676 memset(hwep
->qh
.ptr
, 0, sizeof(*hwep
->qh
.ptr
));
1679 * set up shorthands for ep0 out and in endpoints,
1680 * don't add to gadget's ep_list
1688 usb_ep_set_maxpacket_limit(&hwep
->ep
, CTRL_PAYLOAD_MAX
);
1692 list_add_tail(&hwep
->ep
.ep_list
, &ci
->gadget
.ep_list
);
1698 static void destroy_eps(struct ci_hdrc
*ci
)
1702 for (i
= 0; i
< ci
->hw_ep_max
; i
++) {
1703 struct ci_hw_ep
*hwep
= &ci
->ci_hw_ep
[i
];
1705 if (hwep
->pending_td
)
1706 free_pending_td(hwep
);
1707 dma_pool_free(ci
->qh_pool
, hwep
->qh
.ptr
, hwep
->qh
.dma
);
1712 * ci_udc_start: register a gadget driver
1713 * @gadget: our gadget
1714 * @driver: the driver being registered
1716 * Interrupts are enabled here.
1718 static int ci_udc_start(struct usb_gadget
*gadget
,
1719 struct usb_gadget_driver
*driver
)
1721 struct ci_hdrc
*ci
= container_of(gadget
, struct ci_hdrc
, gadget
);
1722 unsigned long flags
;
1723 int retval
= -ENOMEM
;
1725 if (driver
->disconnect
== NULL
)
1729 ci
->ep0out
->ep
.desc
= &ctrl_endpt_out_desc
;
1730 retval
= usb_ep_enable(&ci
->ep0out
->ep
);
1734 ci
->ep0in
->ep
.desc
= &ctrl_endpt_in_desc
;
1735 retval
= usb_ep_enable(&ci
->ep0in
->ep
);
1739 ci
->driver
= driver
;
1741 /* Start otg fsm for B-device */
1742 if (ci_otg_is_fsm_mode(ci
) && ci
->fsm
.id
) {
1743 ci_hdrc_otg_fsm_start(ci
);
1747 pm_runtime_get_sync(&ci
->gadget
.dev
);
1748 if (ci
->vbus_active
) {
1749 spin_lock_irqsave(&ci
->lock
, flags
);
1750 hw_device_reset(ci
);
1752 usb_udc_vbus_handler(&ci
->gadget
, false);
1753 pm_runtime_put_sync(&ci
->gadget
.dev
);
1757 retval
= hw_device_state(ci
, ci
->ep0out
->qh
.dma
);
1758 spin_unlock_irqrestore(&ci
->lock
, flags
);
1760 pm_runtime_put_sync(&ci
->gadget
.dev
);
1765 static void ci_udc_stop_for_otg_fsm(struct ci_hdrc
*ci
)
1767 if (!ci_otg_is_fsm_mode(ci
))
1770 mutex_lock(&ci
->fsm
.lock
);
1771 if (ci
->fsm
.otg
->state
== OTG_STATE_A_PERIPHERAL
) {
1772 ci
->fsm
.a_bidl_adis_tmout
= 1;
1773 ci_hdrc_otg_fsm_start(ci
);
1774 } else if (ci
->fsm
.otg
->state
== OTG_STATE_B_PERIPHERAL
) {
1775 ci
->fsm
.protocol
= PROTO_UNDEF
;
1776 ci
->fsm
.otg
->state
= OTG_STATE_UNDEFINED
;
1778 mutex_unlock(&ci
->fsm
.lock
);
1782 * ci_udc_stop: unregister a gadget driver
1784 static int ci_udc_stop(struct usb_gadget
*gadget
)
1786 struct ci_hdrc
*ci
= container_of(gadget
, struct ci_hdrc
, gadget
);
1787 unsigned long flags
;
1789 spin_lock_irqsave(&ci
->lock
, flags
);
1791 if (ci
->vbus_active
) {
1792 hw_device_state(ci
, 0);
1793 if (ci
->platdata
->notify_event
)
1794 ci
->platdata
->notify_event(ci
,
1795 CI_HDRC_CONTROLLER_STOPPED_EVENT
);
1796 spin_unlock_irqrestore(&ci
->lock
, flags
);
1797 _gadget_stop_activity(&ci
->gadget
);
1798 spin_lock_irqsave(&ci
->lock
, flags
);
1799 pm_runtime_put(&ci
->gadget
.dev
);
1803 spin_unlock_irqrestore(&ci
->lock
, flags
);
1805 ci_udc_stop_for_otg_fsm(ci
);
1809 /******************************************************************************
1811 *****************************************************************************/
1813 * udc_irq: ci interrupt handler
1815 * This function returns IRQ_HANDLED if the IRQ has been handled
1816 * It locks access to registers
1818 static irqreturn_t
udc_irq(struct ci_hdrc
*ci
)
1826 spin_lock(&ci
->lock
);
1828 if (ci
->platdata
->flags
& CI_HDRC_REGS_SHARED
) {
1829 if (hw_read(ci
, OP_USBMODE
, USBMODE_CM
) !=
1831 spin_unlock(&ci
->lock
);
1835 intr
= hw_test_and_clear_intr_active(ci
);
1838 /* order defines priority - do NOT change it */
1839 if (USBi_URI
& intr
)
1840 isr_reset_handler(ci
);
1842 if (USBi_PCI
& intr
) {
1843 ci
->gadget
.speed
= hw_port_is_high_speed(ci
) ?
1844 USB_SPEED_HIGH
: USB_SPEED_FULL
;
1845 if (ci
->suspended
&& ci
->driver
->resume
) {
1846 spin_unlock(&ci
->lock
);
1847 ci
->driver
->resume(&ci
->gadget
);
1848 spin_lock(&ci
->lock
);
1854 isr_tr_complete_handler(ci
);
1856 if (USBi_SLI
& intr
) {
1857 if (ci
->gadget
.speed
!= USB_SPEED_UNKNOWN
&&
1858 ci
->driver
->suspend
) {
1860 spin_unlock(&ci
->lock
);
1861 ci
->driver
->suspend(&ci
->gadget
);
1862 usb_gadget_set_state(&ci
->gadget
,
1863 USB_STATE_SUSPENDED
);
1864 spin_lock(&ci
->lock
);
1867 retval
= IRQ_HANDLED
;
1871 spin_unlock(&ci
->lock
);
1877 * udc_start: initialize gadget role
1878 * @ci: chipidea controller
1880 static int udc_start(struct ci_hdrc
*ci
)
1882 struct device
*dev
= ci
->dev
;
1883 struct usb_otg_caps
*otg_caps
= &ci
->platdata
->ci_otg_caps
;
1886 spin_lock_init(&ci
->lock
);
1888 ci
->gadget
.ops
= &usb_gadget_ops
;
1889 ci
->gadget
.speed
= USB_SPEED_UNKNOWN
;
1890 ci
->gadget
.max_speed
= USB_SPEED_HIGH
;
1891 ci
->gadget
.name
= ci
->platdata
->name
;
1892 ci
->gadget
.otg_caps
= otg_caps
;
1894 if (ci
->is_otg
&& (otg_caps
->hnp_support
|| otg_caps
->srp_support
||
1895 otg_caps
->adp_support
))
1896 ci
->gadget
.is_otg
= 1;
1898 INIT_LIST_HEAD(&ci
->gadget
.ep_list
);
1900 /* alloc resources */
1901 ci
->qh_pool
= dma_pool_create("ci_hw_qh", dev
,
1902 sizeof(struct ci_hw_qh
),
1903 64, CI_HDRC_PAGE_SIZE
);
1904 if (ci
->qh_pool
== NULL
)
1907 ci
->td_pool
= dma_pool_create("ci_hw_td", dev
,
1908 sizeof(struct ci_hw_td
),
1909 64, CI_HDRC_PAGE_SIZE
);
1910 if (ci
->td_pool
== NULL
) {
1915 retval
= init_eps(ci
);
1919 ci
->gadget
.ep0
= &ci
->ep0in
->ep
;
1921 retval
= usb_add_gadget_udc(dev
, &ci
->gadget
);
1925 pm_runtime_no_callbacks(&ci
->gadget
.dev
);
1926 pm_runtime_enable(&ci
->gadget
.dev
);
1933 dma_pool_destroy(ci
->td_pool
);
1935 dma_pool_destroy(ci
->qh_pool
);
1940 * ci_hdrc_gadget_destroy: parent remove must call this to remove UDC
1942 * No interrupts active, the IRQ has been released
1944 void ci_hdrc_gadget_destroy(struct ci_hdrc
*ci
)
1946 if (!ci
->roles
[CI_ROLE_GADGET
])
1949 usb_del_gadget_udc(&ci
->gadget
);
1953 dma_pool_destroy(ci
->td_pool
);
1954 dma_pool_destroy(ci
->qh_pool
);
1957 static int udc_id_switch_for_device(struct ci_hdrc
*ci
)
1960 /* Clear and enable BSV irq */
1961 hw_write_otgsc(ci
, OTGSC_BSVIS
| OTGSC_BSVIE
,
1962 OTGSC_BSVIS
| OTGSC_BSVIE
);
1967 static void udc_id_switch_for_host(struct ci_hdrc
*ci
)
1970 * host doesn't care B_SESSION_VALID event
1971 * so clear and disbale BSV irq
1974 hw_write_otgsc(ci
, OTGSC_BSVIE
| OTGSC_BSVIS
, OTGSC_BSVIS
);
1978 * ci_hdrc_gadget_init - initialize device related bits
1979 * ci: the controller
1981 * This function initializes the gadget, if the device is "device capable".
1983 int ci_hdrc_gadget_init(struct ci_hdrc
*ci
)
1985 struct ci_role_driver
*rdrv
;
1987 if (!hw_read(ci
, CAP_DCCPARAMS
, DCCPARAMS_DC
))
1990 rdrv
= devm_kzalloc(ci
->dev
, sizeof(struct ci_role_driver
), GFP_KERNEL
);
1994 rdrv
->start
= udc_id_switch_for_device
;
1995 rdrv
->stop
= udc_id_switch_for_host
;
1996 rdrv
->irq
= udc_irq
;
1997 rdrv
->name
= "gadget";
1998 ci
->roles
[CI_ROLE_GADGET
] = rdrv
;
2000 return udc_start(ci
);