drivers/usb/core/quirks.c

   1 /*
   2  * USB device quirk handling logic and table
   3  *
   4  * Copyright (c) 2007 Oliver Neukum
   5  * Copyright (c) 2007 Greg Kroah-Hartman <gregkh@suse.de>
   6  *
   7  * This program is free software; you can redistribute it and/or modify it
   8  * under the terms of the GNU General Public License as published by the Free
   9  * Software Foundation, version 2.
  10  *
  11  *
  12  */
  13
  14 #include <linux/usb.h>
  15 #include <linux/usb/quirks.h>
  16 #include "usb.h"
  17
  18 /* Lists of quirky USB devices, split in device quirks and interface quirks.
  19  * Device quirks are applied at the very beginning of the enumeration process,
  20  * right after reading the device descriptor. They can thus only match on device
  21  * information.
  22  *
  23  * Interface quirks are applied after reading all the configuration descriptors.
  24  * They can match on both device and interface information.
  25  *
  26  * Note that the DELAY_INIT and HONOR_BNUMINTERFACES quirks do not make sense as
  27  * interface quirks, as they only influence the enumeration process which is run
  28  * before processing the interface quirks.
  29  *
  30  * Please keep the lists ordered by:
  31  *      1) Vendor ID
  32  *      2) Product ID
  33  *      3) Class ID
  34  */
  35 static const struct usb_device_id usb_quirk_list[] = {
  36         /* CBM - Flash disk */
  37         { USB_DEVICE(0x0204, 0x6025), .driver_info = USB_QUIRK_RESET_RESUME },
  38
  39         /* HP 5300/5370C scanner */
  40         { USB_DEVICE(0x03f0, 0x0701), .driver_info =
  41                         USB_QUIRK_STRING_FETCH_255 },
  42
  43         /* Creative SB Audigy 2 NX */
  44         { USB_DEVICE(0x041e, 0x3020), .driver_info = USB_QUIRK_RESET_RESUME },
  45
  46         /* Logitech Quickcam Fusion */
  47         { USB_DEVICE(0x046d, 0x08c1), .driver_info = USB_QUIRK_RESET_RESUME },
  48
  49         /* Logitech Quickcam Orbit MP */
  50         { USB_DEVICE(0x046d, 0x08c2), .driver_info = USB_QUIRK_RESET_RESUME },
  51
  52         /* Logitech Quickcam Pro for Notebook */
  53         { USB_DEVICE(0x046d, 0x08c3), .driver_info = USB_QUIRK_RESET_RESUME },
  54
  55         /* Logitech Quickcam Pro 5000 */
  56         { USB_DEVICE(0x046d, 0x08c5), .driver_info = USB_QUIRK_RESET_RESUME },
  57
  58         /* Logitech Quickcam OEM Dell Notebook */
  59         { USB_DEVICE(0x046d, 0x08c6), .driver_info = USB_QUIRK_RESET_RESUME },
  60
  61         /* Logitech Quickcam OEM Cisco VT Camera II */
  62         { USB_DEVICE(0x046d, 0x08c7), .driver_info = USB_QUIRK_RESET_RESUME },
  63
  64         /* Logitech Harmony 700-series */
  65         { USB_DEVICE(0x046d, 0xc122), .driver_info = USB_QUIRK_DELAY_INIT },
  66
  67         /* Philips PSC805 audio device */
  68         { USB_DEVICE(0x0471, 0x0155), .driver_info = USB_QUIRK_RESET_RESUME },
  69
  70         /* Artisman Watchdog Dongle */
  71         { USB_DEVICE(0x04b4, 0x0526), .driver_info =
  72                         USB_QUIRK_CONFIG_INTF_STRINGS },
  73
  74         /* Microchip Joss Optical infrared touchboard device */
  75         { USB_DEVICE(0x04d8, 0x000c), .driver_info =
  76                         USB_QUIRK_CONFIG_INTF_STRINGS },
  77
  78         /* Samsung Android phone modem - ID conflict with SPH-I500 */
  79         { USB_DEVICE(0x04e8, 0x6601), .driver_info =
  80                         USB_QUIRK_CONFIG_INTF_STRINGS },
  81
  82         /* Roland SC-8820 */
  83         { USB_DEVICE(0x0582, 0x0007), .driver_info = USB_QUIRK_RESET_RESUME },
  84
  85         /* Edirol SD-20 */
  86         { USB_DEVICE(0x0582, 0x0027), .driver_info = USB_QUIRK_RESET_RESUME },
  87
  88         /* appletouch */
  89         { USB_DEVICE(0x05ac, 0x021a), .driver_info = USB_QUIRK_RESET_RESUME },
  90
  91         /* Avision AV600U */
  92         { USB_DEVICE(0x0638, 0x0a13), .driver_info =
  93           USB_QUIRK_STRING_FETCH_255 },
  94
  95         /* Saitek Cyborg Gold Joystick */
  96         { USB_DEVICE(0x06a3, 0x0006), .driver_info =
  97                         USB_QUIRK_CONFIG_INTF_STRINGS },
  98
  99         /* Guillemot Webcam Hercules Dualpix Exchange (2nd ID) */
 100         { USB_DEVICE(0x06f8, 0x0804), .driver_info = USB_QUIRK_RESET_RESUME },
 101
 102         /* Guillemot Webcam Hercules Dualpix Exchange*/
 103         { USB_DEVICE(0x06f8, 0x3005), .driver_info = USB_QUIRK_RESET_RESUME },
 104
 105         /* Midiman M-Audio Keystation 88es */
 106         { USB_DEVICE(0x0763, 0x0192), .driver_info = USB_QUIRK_RESET_RESUME },
 107
 108         /* M-Systems Flash Disk Pioneers */
 109         { USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME },
 110
 111         /* Keytouch QWERTY Panel keyboard */
 112         { USB_DEVICE(0x0926, 0x3333), .driver_info =
 113                         USB_QUIRK_CONFIG_INTF_STRINGS },
 114
 115         /* X-Rite/Gretag-Macbeth Eye-One Pro display colorimeter */
 116         { USB_DEVICE(0x0971, 0x2000), .driver_info = USB_QUIRK_NO_SET_INTF },
 117
 118         /* Broadcom BCM92035DGROM BT dongle */
 119         { USB_DEVICE(0x0a5c, 0x2021), .driver_info = USB_QUIRK_RESET_RESUME },
 120
 121         /* Action Semiconductor flash disk */
 122         { USB_DEVICE(0x10d6, 0x2200), .driver_info =
 123                         USB_QUIRK_STRING_FETCH_255 },
 124
 125         /* SKYMEDI USB_DRIVE */
 126         { USB_DEVICE(0x1516, 0x8628), .driver_info = USB_QUIRK_RESET_RESUME },
 127
 128         /* BUILDWIN Photo Frame */
 129         { USB_DEVICE(0x1908, 0x1315), .driver_info =
 130                         USB_QUIRK_HONOR_BNUMINTERFACES },
 131
 132         /* INTEL VALUE SSD */
 133         { USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME },
 134
 135         { }  /* terminating entry must be last */
 136 };
 137
 138 static const struct usb_device_id usb_interface_quirk_list[] = {
 139         /* Logitech UVC Cameras */
 140         { USB_VENDOR_AND_INTERFACE_INFO(0x046d, USB_CLASS_VIDEO, 1, 0),
 141           .driver_info = USB_QUIRK_RESET_RESUME },
 142
 143         { }  /* terminating entry must be last */
 144 };
 145
 146 static bool usb_match_any_interface(struct usb_device *udev,
 147                                     const struct usb_device_id *id)
 148 {
 149         unsigned int i;
 150
 151         for (i = 0; i < udev->descriptor.bNumConfigurations; ++i) {
 152                 struct usb_host_config *cfg = &udev->config[i];
 153                 unsigned int j;
 154
 155                 for (j = 0; j < cfg->desc.bNumInterfaces; ++j) {
 156                         struct usb_interface_cache *cache;
 157                         struct usb_host_interface *intf;
 158
 159                         cache = cfg->intf_cache[j];
 160                         if (cache->num_altsetting == 0)
 161                                 continue;
 162
 163                         intf = &cache->altsetting[0];
 164                         if (usb_match_one_id_intf(udev, intf, id))
 165                                 return true;
 166                 }
 167         }
 168
 169         return false;
 170 }
 171
 172 static u32 __usb_detect_quirks(struct usb_device *udev,
 173                                const struct usb_device_id *id)
 174 {
 175         u32 quirks = 0;
 176
 177         for (; id->match_flags; id++) {
 178                 if (!usb_match_device(udev, id))
 179                         continue;
 180
 181                 if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_INFO) &&
 182                     !usb_match_any_interface(udev, id))
 183                         continue;
 184
 185                 quirks |= (u32)(id->driver_info);
 186         }
 187
 188         return quirks;
 189 }
 190
 191 /*
 192  * Detect any quirks the device has, and do any housekeeping for it if needed.
 193  */
 194 void usb_detect_quirks(struct usb_device *udev)
 195 {
 196         udev->quirks = __usb_detect_quirks(udev, usb_quirk_list);
 197         if (udev->quirks)
 198                 dev_dbg(&udev->dev, "USB quirks for this device: %x\n",
 199                         udev->quirks);
 200
 201         /* For the present, all devices default to USB-PERSIST enabled */
 202 #if 0           /* was: #ifdef CONFIG_PM */
 203         /* Hubs are automatically enabled for USB-PERSIST */
 204         if (udev->descriptor.bDeviceClass == USB_CLASS_HUB)
 205                 udev->persist_enabled = 1;
 206
 207 #else
 208         /* In the absence of PM, we can safely enable USB-PERSIST
 209          * for all devices.  It will affect things like hub resets
 210          * and EMF-related port disables.
 211          */
 212         if (!(udev->quirks & USB_QUIRK_RESET))
 213                 udev->persist_enabled = 1;
 214 #endif  /* CONFIG_PM */
 215 }
 216
 217 void usb_detect_interface_quirks(struct usb_device *udev)
 218 {
 219         u32 quirks;
 220
 221         quirks = __usb_detect_quirks(udev, usb_interface_quirk_list);
 222         if (quirks == 0)
 223                 return;
 224
 225         dev_dbg(&udev->dev, "USB interface quirks for this device: %x\n",
 226                 quirks);
 227         udev->quirks |= quirks;
 228 }