drivers/usb/serial/Kconfig

   1 #
   2 # USB Serial device configuration
   3 #
   4
   5 menu "USB Serial Converter support"
   6         depends on USB!=n
   7
   8 config USB_SERIAL
   9         tristate "USB Serial Converter support"
  10         depends on USB
  11         ---help---
  12           Say Y here if you have a USB device that provides normal serial
  13           ports, or acts like a serial device, and you want to connect it to
  14           your USB bus.
  15
  16           Please read <file:Documentation/usb/usb-serial.txt> for more
  17           information on the specifics of the different devices that are
  18           supported, and on how to use them.
  19
  20           To compile this driver as a module, choose M here: the
  21           module will be called usbserial.
  22
  23 config USB_SERIAL_CONSOLE
  24         bool "USB Serial Console device support (EXPERIMENTAL)"
  25         depends on USB_SERIAL=y && EXPERIMENTAL
  26         ---help---
  27           If you say Y here, it will be possible to use a USB to serial
  28           converter port as the system console (the system console is the
  29           device which receives all kernel messages and warnings and which
  30           allows logins in single user mode). This could be useful if some
  31           terminal or printer is connected to that serial port.
  32
  33           Even if you say Y here, the currently visible virtual console
  34           (/dev/tty0) will still be used as the system console by default, but
  35           you can alter that using a kernel command line option such as
  36           "console=ttyUSB0". (Try "man bootparam" or see the documentation of
  37           your boot loader (lilo or loadlin) about how to pass options to the
  38           kernel at boot time.)
  39
  40           If you don't have a VGA card installed and you say Y here, the
  41           kernel will automatically use the first USB to serial converter
  42           port, /dev/ttyUSB0, as system console.
  43
  44           If unsure, say N.
  45
  46 config USB_SERIAL_GENERIC
  47         bool "USB Generic Serial Driver"
  48         depends on USB_SERIAL
  49         help
  50           Say Y here if you want to use the generic USB serial driver.  Please
  51           read <file:Documentation/usb/usb-serial.txt> for more information on
  52           using this driver.  It is recommended that the "USB Serial converter
  53           support" be compiled as a module for this driver to be used
  54           properly.
  55
  56 config USB_SERIAL_AIRPRIME
  57         tristate "USB AirPrime CDMA Wireless Driver"
  58         depends on USB_SERIAL
  59         help
  60           Say Y here if you want to use a AirPrime CDMA Wireless PC card.
  61
  62           To compile this driver as a module, choose M here: the
  63           module will be called airprime.
  64
  65 config USB_SERIAL_BELKIN
  66         tristate "USB Belkin and Peracom Single Port Serial Driver"
  67         depends on USB_SERIAL
  68         help
  69           Say Y here if you want to use a Belkin USB Serial single port
  70           adaptor (F5U103 is one of the model numbers) or the Peracom single
  71           port USB to serial adapter.
  72
  73           To compile this driver as a module, choose M here: the
  74           module will be called belkin_sa.
  75
  76 config USB_SERIAL_WHITEHEAT
  77         tristate "USB ConnectTech WhiteHEAT Serial Driver"
  78         depends on USB_SERIAL && BROKEN_ON_SMP
  79         help
  80           Say Y here if you want to use a ConnectTech WhiteHEAT 4 port
  81           USB to serial converter device.
  82
  83           To compile this driver as a module, choose M here: the
  84           module will be called whiteheat.
  85
  86 config USB_SERIAL_DIGI_ACCELEPORT
  87         tristate "USB Digi International AccelePort USB Serial Driver"
  88         depends on USB_SERIAL
  89         ---help---
  90           Say Y here if you want to use Digi AccelePort USB 2 or 4 devices,
  91           2 port (plus parallel port) and 4 port USB serial converters.  The
  92           parallel port on the USB 2 appears as a third serial port on Linux.
  93           The Digi Acceleport USB 8 is not yet supported by this driver.
  94
  95           This driver works under SMP with the usb-uhci driver.  It does not
  96           work under SMP with the uhci driver.
  97
  98           To compile this driver as a module, choose M here: the
  99           module will be called digi_acceleport.
 100
 101 config USB_SERIAL_CP2101
 102         tristate "USB CP2101 UART Bridge Controller"
 103         depends on USB_SERIAL && EXPERIMENTAL
 104         help
 105           Say Y here if you want to use a CP2101/CP2102 based USB to RS232
 106           converter.
 107
 108           To compile this driver as a module, choose M here: the
 109           module will be called cp2101.
 110
 111 config USB_SERIAL_CYPRESS_M8
 112         tristate "USB Cypress M8 USB Serial Driver"
 113         depends on USB_SERIAL && EXPERIMENTAL
 114         help
 115           Say Y here if you want to use a device that contains the Cypress
 116           USB to Serial microcontroller, such as the DeLorme Earthmate GPS.
 117
 118                 Attempted SMP support... send bug reports!
 119
 120           Supported microcontrollers in the CY4601 family are:
 121                 CY7C63741 CY7C63742 CY7C63743 CY7C64013
 122
 123           To compile this driver as a module, choose M here: the
 124           module will be called cypress_m8.
 125
 126 config USB_SERIAL_EMPEG
 127         tristate "USB Empeg empeg-car Mark I/II Driver"
 128         depends on USB_SERIAL
 129         help
 130           Say Y here if you want to connect to your Empeg empeg-car Mark I/II
 131           mp3 player via USB.  The driver uses a single ttyUSB{0,1,2,...}
 132           device node.  See <file:Documentation/usb/usb-serial.txt> for more
 133           tidbits of information.
 134
 135           To compile this driver as a module, choose M here: the
 136           module will be called empeg.
 137
 138 config USB_SERIAL_FTDI_SIO
 139         tristate "USB FTDI Single Port Serial Driver (EXPERIMENTAL)"
 140         depends on USB_SERIAL && EXPERIMENTAL
 141         ---help---
 142           Say Y here if you want to use a FTDI SIO single port USB to serial
 143           converter device. The implementation I have is called the USC-1000.
 144           This driver has also be tested with the 245 and 232 devices.
 145
 146           See <http://ftdi-usb-sio.sourceforge.net/> for more
 147           information on this driver and the device.
 148
 149           To compile this driver as a module, choose M here: the
 150           module will be called ftdi_sio.
 151
 152 config USB_SERIAL_VISOR
 153         tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver"
 154         depends on USB_SERIAL
 155         help
 156           Say Y here if you want to connect to your HandSpring Visor, Palm
 157           m500 or m505 through its USB docking station. See
 158           <http://usbvisor.sourceforge.net/> for more information on using this
 159           driver.
 160
 161           To compile this driver as a module, choose M here: the
 162           module will be called visor.
 163
 164 config USB_SERIAL_IPAQ
 165         tristate "USB PocketPC PDA Driver"
 166         depends on USB_SERIAL
 167         help
 168           Say Y here if you want to connect to your Compaq iPAQ, HP Jornada
 169           or any other PDA running Windows CE 3.0 or PocketPC 2002
 170           using a USB cradle/cable. For information on using the driver,
 171           read <file:Documentation/usb/usb-serial.txt>.
 172
 173           To compile this driver as a module, choose M here: the
 174           module will be called ipaq.
 175
 176 config USB_SERIAL_IR
 177         tristate "USB IR Dongle Serial Driver (EXPERIMENTAL)"
 178         depends on USB_SERIAL && EXPERIMENTAL
 179         help
 180           Say Y here if you want to enable simple serial support for USB IrDA
 181           devices.  This is useful if you do not want to use the full IrDA
 182           stack.
 183
 184           To compile this driver as a module, choose M here: the
 185           module will be called ir-usb.
 186
 187 config USB_SERIAL_EDGEPORT
 188         tristate "USB Inside Out Edgeport Serial Driver"
 189         depends on USB_SERIAL
 190         ---help---
 191           Say Y here if you want to use any of the following devices from
 192           Inside Out Networks (Digi):
 193           Edgeport/4
 194           Rapidport/4
 195           Edgeport/4t
 196           Edgeport/2
 197           Edgeport/4i
 198           Edgeport/2i
 199           Edgeport/421
 200           Edgeport/21
 201           Edgeport/8
 202           Edgeport/8 Dual
 203           Edgeport/2D8
 204           Edgeport/4D8
 205           Edgeport/8i
 206           Edgeport/2 DIN
 207           Edgeport/4 DIN
 208           Edgeport/16 Dual
 209
 210           To compile this driver as a module, choose M here: the
 211           module will be called io_edgeport.
 212
 213 config USB_SERIAL_EDGEPORT_TI
 214         tristate "USB Inside Out Edgeport Serial Driver (TI devices)"
 215         depends on USB_SERIAL
 216         help
 217           Say Y here if you want to use any of the devices from Inside Out
 218           Networks (Digi) that are not supported by the io_edgeport driver.
 219           This includes the Edgeport/1 device.
 220
 221           To compile this driver as a module, choose M here: the
 222           module will be called io_ti.
 223
 224 config USB_SERIAL_GARMIN
 225        tristate "USB Garmin GPS driver"
 226        depends on USB_SERIAL
 227        help
 228          Say Y here if you want to connect to your Garmin GPS.
 229          Should work with most Garmin GPS devices which have a native USB port.
 230
 231          See <http://sourceforge.net/projects/garmin-gps> for the latest
 232          version of the driver.
 233
 234          To compile this driver as a module, choose M here: the
 235          module will be called garmin_gps.
 236
 237 config USB_SERIAL_IPW
 238         tristate "USB IPWireless (3G UMTS TDD) Driver (EXPERIMENTAL)"
 239         depends on USB_SERIAL && EXPERIMENTAL
 240         help
 241           Say Y here if you want to use a IPWireless USB modem such as
 242           the ones supplied by Axity3G/Sentech South Africa.
 243
 244           To compile this driver as a module, choose M here: the
 245           module will be called ipw.
 246
 247 config USB_SERIAL_KEYSPAN_PDA
 248         tristate "USB Keyspan PDA Single Port Serial Driver"
 249         depends on USB_SERIAL
 250         help
 251           Say Y here if you want to use a Keyspan PDA single port USB to
 252           serial converter device.  This driver makes use of firmware
 253           developed from scratch by Brian Warner.
 254
 255           To compile this driver as a module, choose M here: the
 256           module will be called keyspan_pda.
 257
 258 config USB_SERIAL_KEYSPAN
 259         tristate "USB Keyspan USA-xxx Serial Driver"
 260         depends on USB_SERIAL
 261         ---help---
 262           Say Y here if you want to use Keyspan USB to serial converter
 263           devices.  This driver makes use of Keyspan's official firmware
 264           and was developed with their support.  You must also include
 265           firmware to support your particular device(s).
 266
 267           See <http://misc.nu/hugh/keyspan.html> for more information.
 268
 269           To compile this driver as a module, choose M here: the
 270           module will be called keyspan.
 271
 272 config USB_SERIAL_KEYSPAN_MPR
 273         bool "USB Keyspan MPR Firmware"
 274         depends on USB_SERIAL_KEYSPAN
 275         help
 276           Say Y here to include firmware for the Keyspan MPR converter.
 277
 278 config USB_SERIAL_KEYSPAN_USA28
 279         bool "USB Keyspan USA-28 Firmware"
 280         depends on USB_SERIAL_KEYSPAN
 281         help
 282           Say Y here to include firmware for the USA-28 converter.
 283
 284 config USB_SERIAL_KEYSPAN_USA28X
 285         bool "USB Keyspan USA-28X Firmware"
 286         depends on USB_SERIAL_KEYSPAN
 287         help
 288           Say Y here to include firmware for the USA-28X converter.
 289           Be sure you have a USA-28X, there are also 28XA and 28XB
 290           models, the label underneath has the actual part number.
 291
 292 config USB_SERIAL_KEYSPAN_USA28XA
 293         bool "USB Keyspan USA-28XA Firmware"
 294         depends on USB_SERIAL_KEYSPAN
 295         help
 296           Say Y here to include firmware for the USA-28XA converter.
 297           Be sure you have a USA-28XA, there are also 28X and 28XB
 298           models, the label underneath has the actual part number.
 299
 300 config USB_SERIAL_KEYSPAN_USA28XB
 301         bool "USB Keyspan USA-28XB Firmware"
 302         depends on USB_SERIAL_KEYSPAN
 303         help
 304           Say Y here to include firmware for the USA-28XB converter.
 305           Be sure you have a USA-28XB, there are also 28X and 28XA
 306           models, the label underneath has the actual part number.
 307
 308 config USB_SERIAL_KEYSPAN_USA19
 309         bool "USB Keyspan USA-19 Firmware"
 310         depends on USB_SERIAL_KEYSPAN
 311         help
 312           Say Y here to include firmware for the USA-19 converter.
 313
 314 config USB_SERIAL_KEYSPAN_USA18X
 315         bool "USB Keyspan USA-18X Firmware"
 316         depends on USB_SERIAL_KEYSPAN
 317         help
 318           Say Y here to include firmware for the USA-18X converter.
 319
 320 config USB_SERIAL_KEYSPAN_USA19W
 321         bool "USB Keyspan USA-19W Firmware"
 322         depends on USB_SERIAL_KEYSPAN
 323         help
 324           Say Y here to include firmware for the USA-19W converter.
 325
 326 config USB_SERIAL_KEYSPAN_USA19QW
 327         bool "USB Keyspan USA-19QW Firmware"
 328         depends on USB_SERIAL_KEYSPAN
 329         help
 330           Say Y here to include firmware for the USA-19QW converter.
 331
 332 config USB_SERIAL_KEYSPAN_USA19QI
 333         bool "USB Keyspan USA-19QI Firmware"
 334         depends on USB_SERIAL_KEYSPAN
 335         help
 336           Say Y here to include firmware for the USA-19QI converter.
 337
 338 config USB_SERIAL_KEYSPAN_USA49W
 339         bool "USB Keyspan USA-49W Firmware"
 340         depends on USB_SERIAL_KEYSPAN
 341         help
 342           Say Y here to include firmware for the USA-49W converter.
 343
 344 config USB_SERIAL_KEYSPAN_USA49WLC
 345         bool "USB Keyspan USA-49WLC Firmware"
 346         depends on USB_SERIAL_KEYSPAN
 347         help
 348           Say Y here to include firmware for the USA-49WLC converter.
 349
 350 config USB_SERIAL_KLSI
 351         tristate "USB KL5KUSB105 (Palmconnect) Driver (EXPERIMENTAL)"
 352         depends on USB_SERIAL && EXPERIMENTAL
 353         ---help---
 354           Say Y here if you want to use a KL5KUSB105 - based single port
 355           serial adapter. The most widely known -- and currently the only
 356           tested -- device in this category is the PalmConnect USB Serial
 357           adapter sold by Palm Inc. for use with their Palm III and Palm V
 358           series PDAs.
 359
 360           Please read <file:Documentation/usb/usb-serial.txt> for more
 361           information.
 362
 363           To compile this driver as a module, choose M here: the
 364           module will be called kl5kusb105.
 365
 366 config USB_SERIAL_KOBIL_SCT
 367         tristate "USB KOBIL chipcard reader"
 368         depends on USB_SERIAL
 369         ---help---
 370           Say Y here if you want to use one of the following KOBIL USB chipcard
 371           readers:
 372
 373             - USB TWIN
 374             - KAAN Standard Plus
 375             - KAAN SIM
 376             - SecOVID Reader Plus
 377             - B1 Professional
 378             - KAAN Professional
 379
 380           Note that you need a current CT-API.
 381           To compile this driver as a module, choose M here: the
 382           module will be called kobil_sct.
 383
 384 config USB_SERIAL_MCT_U232
 385         tristate "USB MCT Single Port Serial Driver"
 386         depends on USB_SERIAL
 387         ---help---
 388           Say Y here if you want to use a USB Serial single port adapter from
 389           Magic Control Technology Corp. (U232 is one of the model numbers).
 390
 391           This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB
 392           BAY devices.
 393
 394           To compile this driver as a module, choose M here: the
 395           module will be called mct_u232.
 396
 397 config USB_SERIAL_PL2303
 398         tristate "USB Prolific 2303 Single Port Serial Driver"
 399         depends on USB_SERIAL
 400         help
 401           Say Y here if you want to use the PL2303 USB Serial single port
 402           adapter from Prolific.
 403
 404           To compile this driver as a module, choose M here: the
 405           module will be called pl2303.
 406
 407 config USB_SERIAL_HP4X
 408         tristate "USB HP4x Calculators support"
 409         depends on USB_SERIAL
 410         help
 411           Say Y here if you want to use an Hewlett-Packard 4x Calculator.
 412
 413           To compile this driver as a module, choose M here: the
 414           module will be called hp4x.
 415
 416 config USB_SERIAL_SAFE
 417         tristate "USB Safe Serial (Encapsulated) Driver (EXPERIMENTAL)"
 418         depends on USB_SERIAL && EXPERIMENTAL
 419
 420 config USB_SERIAL_SAFE_PADDED
 421         bool "USB Secure Encapsulated Driver - Padded"
 422         depends on USB_SERIAL_SAFE
 423
 424 config USB_SERIAL_TI
 425         tristate "USB TI 3410/5052 Serial Driver"
 426         depends on USB_SERIAL
 427         help
 428           Say Y here if you want to use the TI USB 3410 or 5052
 429           serial devices.
 430
 431           To compile this driver as a module, choose M here: the
 432           module will be called ti_usb_3410_5052.
 433
 434 config USB_SERIAL_CYBERJACK
 435         tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader (EXPERIMENTAL)"
 436         depends on USB_SERIAL && EXPERIMENTAL
 437         ---help---
 438           Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard
 439           reader. This is an interface to ISO 7816 compatible contactbased
 440           chipcards, e.g. GSM SIMs.
 441
 442           To compile this driver as a module, choose M here: the
 443           module will be called cyberjack.
 444
 445           If unsure, say N.
 446
 447 config USB_SERIAL_XIRCOM
 448         tristate "USB Xircom / Entregra Single Port Serial Driver"
 449         depends on USB_SERIAL
 450         help
 451           Say Y here if you want to use a Xircom or Entregra single port USB to
 452           serial converter device.  This driver makes use of firmware
 453           developed from scratch by Brian Warner.
 454
 455           To compile this driver as a module, choose M here: the
 456           module will be called keyspan_pda.
 457
 458 config USB_SERIAL_OMNINET
 459         tristate "USB ZyXEL omni.net LCD Plus Driver (EXPERIMENTAL)"
 460         depends on USB_SERIAL && EXPERIMENTAL
 461         help
 462           Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA.
 463
 464           To compile this driver as a module, choose M here: the
 465           module will be called omninet.
 466
 467 config USB_EZUSB
 468         bool
 469         depends on USB_SERIAL_KEYSPAN_PDA || USB_SERIAL_XIRCOM || USB_SERIAL_KEYSPAN || USB_SERIAL_WHITEHEAT
 470         default y
 471
 472 endmenu
 473