drivers/usb/serial/ftdi_sio.h

   1 /*
   2  * Definitions for the FTDI USB Single Port Serial Converter -
   3  * known as FTDI_SIO (Serial Input/Output application of the chipset)
   4  *
   5  * The example I have is known as the USC-1000 which is available from
   6  * http://www.dse.co.nz - cat no XH4214 It looks similar to this:
   7  * http://www.dansdata.com/usbser.htm but I can't be sure There are other
   8  * USC-1000s which don't look like my device though so beware!
   9  *
  10  * The device is based on the FTDI FT8U100AX chip. It has a DB25 on one side,
  11  * USB on the other.
  12  *
  13  * Thanx to FTDI (http://www.ftdi.co.uk) for so kindly providing details
  14  * of the protocol required to talk to the device and ongoing assistence
  15  * during development.
  16  *
  17  * Bill Ryder - bryder@sgi.com formerly of Silicon Graphics, Inc.- wrote the
  18  * FTDI_SIO implementation.
  19  *
  20  * Philipp Gühring - pg@futureware.at - added the Device ID of the USB relais
  21  * from Rudolf Gugler
  22  *
  23  */
  24
  25 #define FTDI_VID        0x0403  /* Vendor Id */
  26 #define FTDI_SIO_PID    0x8372  /* Product Id SIO application of 8U100AX  */
  27 #define FTDI_8U232AM_PID 0x6001 /* Similar device to SIO above */
  28 #define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */
  29 #define FTDI_8U2232C_PID 0x6010 /* Dual channel device */
  30 #define FTDI_RELAIS_PID 0xFA10  /* Relais device from Rudolf Gugler */
  31 #define FTDI_NF_RIC_VID 0x0DCD  /* Vendor Id */
  32 #define FTDI_NF_RIC_PID 0x0001  /* Product Id */
  33
  34
  35 /* www.canusb.com Lawicel CANUSB device */
  36 #define FTDI_CANUSB_PID 0xFFA8 /* Product Id */
  37
  38 /* AlphaMicro Components AMC-232USB01 device */
  39 #define FTDI_AMC232_PID 0xFF00 /* Product Id */
  40
  41 /* ACT Solutions HomePro ZWave interface (http://www.act-solutions.com/HomePro.htm) */
  42 #define FTDI_ACTZWAVE_PID       0xF2D0
  43
  44
  45 /* www.starting-point-systems.com µChameleon device */
  46 #define FTDI_MICRO_CHAMELEON_PID        0xCAA0  /* Product Id */
  47
  48 /* www.irtrans.de device */
  49 #define FTDI_IRTRANS_PID 0xFC60 /* Product Id */
  50
  51
  52 /* www.thoughttechnology.com/ TT-USB provide with procomp use ftdi_sio */
  53 #define FTDI_TTUSB_PID 0xFF20 /* Product Id */
  54
  55 /* iPlus device */
  56 #define FTDI_IPLUS_PID 0xD070 /* Product Id */
  57
  58 /* DMX4ALL DMX Interfaces */
  59 #define FTDI_DMX4ALL 0xC850
  60
  61 /* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */
  62 /* they use the ftdi chipset for the USB interface and the vendor id is the same */
  63 #define FTDI_XF_632_PID 0xFC08  /* 632: 16x2 Character Display */
  64 #define FTDI_XF_634_PID 0xFC09  /* 634: 20x4 Character Display */
  65 #define FTDI_XF_547_PID 0xFC0A  /* 547: Two line Display */
  66 #define FTDI_XF_633_PID 0xFC0B  /* 633: 16x2 Character Display with Keys */
  67 #define FTDI_XF_631_PID 0xFC0C  /* 631: 20x2 Character Display */
  68 #define FTDI_XF_635_PID 0xFC0D  /* 635: 20x4 Character Display */
  69 #define FTDI_XF_640_PID 0xFC0E  /* 640: Two line Display */
  70 #define FTDI_XF_642_PID 0xFC0F  /* 642: Two line Display */
  71
  72 /* Video Networks Limited / Homechoice in the UK use an ftdi-based device for their 1Mb */
  73 /* broadband internet service.  The following PID is exhibited by the usb device supplied */
  74 /* (the VID is the standard ftdi vid (FTDI_VID) */
  75 #define FTDI_VNHCPCUSB_D_PID 0xfe38 /* Product Id */
  76
  77 /*
  78  * PCDJ use ftdi based dj-controllers.  The following PID is for their DAC-2 device
  79  * http://www.pcdjhardware.com/DAC2.asp (PID sent by Wouter Paesen)
  80  * (the VID is the standard ftdi vid (FTDI_VID) */
  81 #define FTDI_PCDJ_DAC2_PID 0xFA88
  82
  83 /*
  84  * The following are the values for the Matrix Orbital LCD displays,
  85  * which are the FT232BM ( similar to the 8U232AM )
  86  */
  87 #define FTDI_MTXORB_0_PID      0xFA00  /* Matrix Orbital Product Id */
  88 #define FTDI_MTXORB_1_PID      0xFA01  /* Matrix Orbital Product Id */
  89 #define FTDI_MTXORB_2_PID      0xFA02  /* Matrix Orbital Product Id */
  90 #define FTDI_MTXORB_3_PID      0xFA03  /* Matrix Orbital Product Id */
  91 #define FTDI_MTXORB_4_PID      0xFA04  /* Matrix Orbital Product Id */
  92 #define FTDI_MTXORB_5_PID      0xFA05  /* Matrix Orbital Product Id */
  93 #define FTDI_MTXORB_6_PID      0xFA06  /* Matrix Orbital Product Id */
  94
  95 /* Interbiometrics USB I/O Board */
  96 /* Developed for Interbiometrics by Rudolf Gugler */
  97 #define INTERBIOMETRICS_VID              0x1209
  98 #define INTERBIOMETRICS_IOBOARD_PID      0x1002
  99 #define INTERBIOMETRICS_MINI_IOBOARD_PID 0x1006
 100
 101 /*
 102  * The following are the values for the Perle Systems
 103  * UltraPort USB serial converters
 104  */
 105 #define FTDI_PERLE_ULTRAPORT_PID 0xF0C0 /* Perle UltraPort Product Id */
 106
 107 /*
 108  * The following are the values for the Sealevel SeaLINK+ adapters.
 109  * (Original list sent by Tuan Hoang.  Ian Abbott renamed the macros and
 110  * removed some PIDs that don't seem to match any existing products.)
 111  */
 112 #define SEALEVEL_VID            0x0c52  /* Sealevel Vendor ID */
 113 #define SEALEVEL_2101_PID       0x2101  /* SeaLINK+232 (2101/2105) */
 114 #define SEALEVEL_2102_PID       0x2102  /* SeaLINK+485 (2102) */
 115 #define SEALEVEL_2103_PID       0x2103  /* SeaLINK+232I (2103) */
 116 #define SEALEVEL_2104_PID       0x2104  /* SeaLINK+485I (2104) */
 117 #define SEALEVEL_2106_PID       0x9020  /* SeaLINK+422 (2106) */
 118 #define SEALEVEL_2201_1_PID     0x2211  /* SeaPORT+2/232 (2201) Port 1 */
 119 #define SEALEVEL_2201_2_PID     0x2221  /* SeaPORT+2/232 (2201) Port 2 */
 120 #define SEALEVEL_2202_1_PID     0x2212  /* SeaPORT+2/485 (2202) Port 1 */
 121 #define SEALEVEL_2202_2_PID     0x2222  /* SeaPORT+2/485 (2202) Port 2 */
 122 #define SEALEVEL_2203_1_PID     0x2213  /* SeaPORT+2 (2203) Port 1 */
 123 #define SEALEVEL_2203_2_PID     0x2223  /* SeaPORT+2 (2203) Port 2 */
 124 #define SEALEVEL_2401_1_PID     0x2411  /* SeaPORT+4/232 (2401) Port 1 */
 125 #define SEALEVEL_2401_2_PID     0x2421  /* SeaPORT+4/232 (2401) Port 2 */
 126 #define SEALEVEL_2401_3_PID     0x2431  /* SeaPORT+4/232 (2401) Port 3 */
 127 #define SEALEVEL_2401_4_PID     0x2441  /* SeaPORT+4/232 (2401) Port 4 */
 128 #define SEALEVEL_2402_1_PID     0x2412  /* SeaPORT+4/485 (2402) Port 1 */
 129 #define SEALEVEL_2402_2_PID     0x2422  /* SeaPORT+4/485 (2402) Port 2 */
 130 #define SEALEVEL_2402_3_PID     0x2432  /* SeaPORT+4/485 (2402) Port 3 */
 131 #define SEALEVEL_2402_4_PID     0x2442  /* SeaPORT+4/485 (2402) Port 4 */
 132 #define SEALEVEL_2403_1_PID     0x2413  /* SeaPORT+4 (2403) Port 1 */
 133 #define SEALEVEL_2403_2_PID     0x2423  /* SeaPORT+4 (2403) Port 2 */
 134 #define SEALEVEL_2403_3_PID     0x2433  /* SeaPORT+4 (2403) Port 3 */
 135 #define SEALEVEL_2403_4_PID     0x2443  /* SeaPORT+4 (2403) Port 4 */
 136 #define SEALEVEL_2801_1_PID     0X2811  /* SeaLINK+8/232 (2801) Port 1 */
 137 #define SEALEVEL_2801_2_PID     0X2821  /* SeaLINK+8/232 (2801) Port 2 */
 138 #define SEALEVEL_2801_3_PID     0X2831  /* SeaLINK+8/232 (2801) Port 3 */
 139 #define SEALEVEL_2801_4_PID     0X2841  /* SeaLINK+8/232 (2801) Port 4 */
 140 #define SEALEVEL_2801_5_PID     0X2851  /* SeaLINK+8/232 (2801) Port 5 */
 141 #define SEALEVEL_2801_6_PID     0X2861  /* SeaLINK+8/232 (2801) Port 6 */
 142 #define SEALEVEL_2801_7_PID     0X2871  /* SeaLINK+8/232 (2801) Port 7 */
 143 #define SEALEVEL_2801_8_PID     0X2881  /* SeaLINK+8/232 (2801) Port 8 */
 144 #define SEALEVEL_2802_1_PID     0X2812  /* SeaLINK+8/485 (2802) Port 1 */
 145 #define SEALEVEL_2802_2_PID     0X2822  /* SeaLINK+8/485 (2802) Port 2 */
 146 #define SEALEVEL_2802_3_PID     0X2832  /* SeaLINK+8/485 (2802) Port 3 */
 147 #define SEALEVEL_2802_4_PID     0X2842  /* SeaLINK+8/485 (2802) Port 4 */
 148 #define SEALEVEL_2802_5_PID     0X2852  /* SeaLINK+8/485 (2802) Port 5 */
 149 #define SEALEVEL_2802_6_PID     0X2862  /* SeaLINK+8/485 (2802) Port 6 */
 150 #define SEALEVEL_2802_7_PID     0X2872  /* SeaLINK+8/485 (2802) Port 7 */
 151 #define SEALEVEL_2802_8_PID     0X2882  /* SeaLINK+8/485 (2802) Port 8 */
 152 #define SEALEVEL_2803_1_PID     0X2813  /* SeaLINK+8 (2803) Port 1 */
 153 #define SEALEVEL_2803_2_PID     0X2823  /* SeaLINK+8 (2803) Port 2 */
 154 #define SEALEVEL_2803_3_PID     0X2833  /* SeaLINK+8 (2803) Port 3 */
 155 #define SEALEVEL_2803_4_PID     0X2843  /* SeaLINK+8 (2803) Port 4 */
 156 #define SEALEVEL_2803_5_PID     0X2853  /* SeaLINK+8 (2803) Port 5 */
 157 #define SEALEVEL_2803_6_PID     0X2863  /* SeaLINK+8 (2803) Port 6 */
 158 #define SEALEVEL_2803_7_PID     0X2873  /* SeaLINK+8 (2803) Port 7 */
 159 #define SEALEVEL_2803_8_PID     0X2883  /* SeaLINK+8 (2803) Port 8 */
 160
 161 /*
 162  * The following are the values for two KOBIL chipcard terminals.
 163  */
 164 #define KOBIL_VID               0x0d46  /* KOBIL Vendor ID */
 165 #define KOBIL_CONV_B1_PID       0x2020  /* KOBIL Konverter for B1 */
 166 #define KOBIL_CONV_KAAN_PID     0x2021  /* KOBIL_Konverter for KAAN */
 167
 168 /*
 169  * Icom ID-1 digital transceiver
 170  */
 171
 172 #define ICOM_ID1_VID            0x0C26
 173 #define ICOM_ID1_PID            0x0004
 174
 175 /*
 176  * ASK.fr devices
 177  */
 178 #define FTDI_ASK_RDR400_PID     0xC991  /* ASK RDR 400 series card reader */
 179
 180 /*
 181  * FTDI USB UART chips used in construction projects from the
 182  * Elektor Electronics magazine (http://elektor-electronics.co.uk)
 183  */
 184 #define ELEKTOR_VID             0x0C7D
 185 #define ELEKTOR_FT323R_PID      0x0005  /* RFID-Reader, issue 09-2006 */
 186
 187 /*
 188  * DSS-20 Sync Station for Sony Ericsson P800
 189  */
 190 #define FTDI_DSS20_PID          0xFC82
 191
 192 /*
 193  * Home Electronics (www.home-electro.com) USB gadgets
 194  */
 195 #define FTDI_HE_TIRA1_PID       0xFA78  /* Tira-1 IR transceiver */
 196
 197 /* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */
 198 /* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */
 199 #define FTDI_USB_UIRT_PID       0xF850  /* Product Id */
 200
 201 /* TNC-X USB-to-packet-radio adapter, versions prior to 3.0 (DLP module) */
 202
 203 #define FTDI_TNC_X_PID          0xEBE0
 204
 205 /*
 206  * ELV USB devices submitted by Christian Abt of ELV (www.elv.de).
 207  * All of these devices use FTDI's vendor ID (0x0403).
 208  *
 209  * The previously included PID for the UO 100 module was incorrect.
 210  * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58).
 211  *
 212  * Armin Laeuger originally sent the PID for the UM 100 module.
 213  */
 214 #define FTDI_ELV_UR100_PID      0xFB58  /* USB-RS232-Umsetzer (UR 100) */
 215 #define FTDI_ELV_UM100_PID      0xFB5A  /* USB-Modul UM 100 */
 216 #define FTDI_ELV_UO100_PID      0xFB5B  /* USB-Modul UO 100 */
 217 #define FTDI_ELV_ALC8500_PID    0xF06E  /* ALC 8500 Expert */
 218 /* Additional ELV PIDs that default to using the FTDI D2XX drivers on
 219  * MS Windows, rather than the FTDI Virtual Com Port drivers.
 220  * Maybe these will be easier to use with the libftdi/libusb user-space
 221  * drivers, or possibly the Comedi drivers in some cases. */
 222 #define FTDI_ELV_CLI7000_PID    0xFB59  /* Computer-Light-Interface (CLI 7000) */
 223 #define FTDI_ELV_PPS7330_PID    0xFB5C  /* Processor-Power-Supply (PPS 7330) */
 224 #define FTDI_ELV_TFM100_PID     0xFB5D  /* Temperartur-Feuchte Messgeraet (TFM 100) */
 225 #define FTDI_ELV_UDF77_PID      0xFB5E  /* USB DCF Funkurh (UDF 77) */
 226 #define FTDI_ELV_UIO88_PID      0xFB5F  /* USB-I/O Interface (UIO 88) */
 227 #define FTDI_ELV_UAD8_PID       0xF068  /* USB-AD-Wandler (UAD 8) */
 228 #define FTDI_ELV_UDA7_PID       0xF069  /* USB-DA-Wandler (UDA 7) */
 229 #define FTDI_ELV_USI2_PID       0xF06A  /* USB-Schrittmotoren-Interface (USI 2) */
 230 #define FTDI_ELV_T1100_PID      0xF06B  /* Thermometer (T 1100) */
 231 #define FTDI_ELV_PCD200_PID     0xF06C  /* PC-Datenlogger (PCD 200) */
 232 #define FTDI_ELV_ULA200_PID     0xF06D  /* USB-LCD-Ansteuerung (ULA 200) */
 233 #define FTDI_ELV_FHZ1000PC_PID  0xF06F  /* FHZ 1000 PC */
 234 #define FTDI_ELV_CSI8_PID       0xE0F0  /* Computer-Schalt-Interface (CSI 8) */
 235 #define FTDI_ELV_EM1000DL_PID   0xE0F1  /* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */
 236 #define FTDI_ELV_PCK100_PID     0xE0F2  /* PC-Kabeltester (PCK 100) */
 237 #define FTDI_ELV_RFP500_PID     0xE0F3  /* HF-Leistungsmesser (RFP 500) */
 238 #define FTDI_ELV_FS20SIG_PID    0xE0F4  /* Signalgeber (FS 20 SIG) */
 239 #define FTDI_ELV_WS300PC_PID    0xE0F6  /* PC-Wetterstation (WS 300 PC) */
 240 #define FTDI_ELV_FHZ1300PC_PID  0xE0E8  /* FHZ 1300 PC */
 241 #define FTDI_ELV_WS500_PID      0xE0E9  /* PC-Wetterstation (WS 500) */
 242
 243 /*
 244  * Definitions for ID TECH (www.idt-net.com) devices
 245  */
 246 #define IDTECH_VID              0x0ACD  /* ID TECH Vendor ID */
 247 #define IDTECH_IDT1221U_PID     0x0300  /* IDT1221U USB to RS-232 adapter */
 248
 249 /*
 250  * Definitions for Omnidirectional Control Technology, Inc. devices
 251  */
 252 #define OCT_VID                 0x0B39  /* OCT vendor ID */
 253 /* Note: OCT US101 is also rebadged as Dick Smith Electronics (NZ) XH6381 */
 254 /* Also rebadged as Dick Smith Electronics (Aus) XH6451 */
 255 /* Also rebadged as SIIG Inc. model US2308 hardware version 1 */
 256 #define OCT_US101_PID           0x0421  /* OCT US101 USB to RS-232 */
 257
 258 /* an infrared receiver for user access control with IR tags */
 259 #define FTDI_PIEGROUP_PID       0xF208  /* Product Id */
 260
 261 /*
 262  * Definitions for Artemis astronomical USB based cameras
 263  * Check it at http://www.artemisccd.co.uk/
 264  */
 265 #define FTDI_ARTEMIS_PID        0xDF28  /* All Artemis Cameras */
 266
 267 /*
 268  * Definitions for ATIK Instruments astronomical USB based cameras
 269  * Check it at http://www.atik-instruments.com/
 270  */
 271 #define FTDI_ATIK_ATK16_PID     0xDF30  /* ATIK ATK-16 Grayscale Camera */
 272 #define FTDI_ATIK_ATK16C_PID    0xDF32  /* ATIK ATK-16C Colour Camera */
 273 #define FTDI_ATIK_ATK16HR_PID   0xDF31  /* ATIK ATK-16HR Grayscale Camera */
 274 #define FTDI_ATIK_ATK16HRC_PID  0xDF33  /* ATIK ATK-16HRC Colour Camera */
 275
 276 /*
 277  * Protego product ids
 278  */
 279 #define PROTEGO_SPECIAL_1       0xFC70  /* special/unknown device */
 280 #define PROTEGO_R2X0            0xFC71  /* R200-USB TRNG unit (R210, R220, and R230) */
 281 #define PROTEGO_SPECIAL_3       0xFC72  /* special/unknown device */
 282 #define PROTEGO_SPECIAL_4       0xFC73  /* special/unknown device */
 283
 284 /*
 285  * Gude Analog- und Digitalsysteme GmbH
 286  */
 287 #define FTDI_GUDEADS_E808_PID    0xE808
 288 #define FTDI_GUDEADS_E809_PID    0xE809
 289 #define FTDI_GUDEADS_E80A_PID    0xE80A
 290 #define FTDI_GUDEADS_E80B_PID    0xE80B
 291 #define FTDI_GUDEADS_E80C_PID    0xE80C
 292 #define FTDI_GUDEADS_E80D_PID    0xE80D
 293 #define FTDI_GUDEADS_E80E_PID    0xE80E
 294 #define FTDI_GUDEADS_E80F_PID    0xE80F
 295 #define FTDI_GUDEADS_E888_PID    0xE888  /* Expert ISDN Control USB */
 296 #define FTDI_GUDEADS_E889_PID    0xE889  /* USB RS-232 OptoBridge */
 297 #define FTDI_GUDEADS_E88A_PID    0xE88A
 298 #define FTDI_GUDEADS_E88B_PID    0xE88B
 299 #define FTDI_GUDEADS_E88C_PID    0xE88C
 300 #define FTDI_GUDEADS_E88D_PID    0xE88D
 301 #define FTDI_GUDEADS_E88E_PID    0xE88E
 302 #define FTDI_GUDEADS_E88F_PID    0xE88F
 303
 304 /*
 305  * Linx Technologies product ids
 306  */
 307 #define LINX_SDMUSBQSS_PID      0xF448  /* Linx SDM-USB-QS-S */
 308 #define LINX_MASTERDEVEL2_PID   0xF449   /* Linx Master Development 2.0 */
 309 #define LINX_FUTURE_0_PID   0xF44A   /* Linx future device */
 310 #define LINX_FUTURE_1_PID   0xF44B   /* Linx future device */
 311 #define LINX_FUTURE_2_PID   0xF44C   /* Linx future device */
 312
 313 /* CCS Inc. ICDU/ICDU40 product ID - the FT232BM is used in an in-circuit-debugger */
 314 /* unit for PIC16's/PIC18's */
 315 #define FTDI_CCSICDU20_0_PID    0xF9D0
 316 #define FTDI_CCSICDU40_1_PID    0xF9D1
 317 #define FTDI_CCSMACHX_2_PID     0xF9D2
 318
 319 /* Inside Accesso contactless reader (http://www.insidefr.com) */
 320 #define INSIDE_ACCESSO          0xFAD0
 321
 322 /*
 323  * Intrepid Control Systems (http://www.intrepidcs.com/) ValueCAN and NeoVI
 324  */
 325 #define INTREPID_VID            0x093C
 326 #define INTREPID_VALUECAN_PID   0x0601
 327 #define INTREPID_NEOVI_PID      0x0701
 328
 329 /*
 330  * Falcom Wireless Communications GmbH
 331  */
 332 #define FALCOM_VID              0x0F94  /* Vendor Id */
 333 #define FALCOM_TWIST_PID        0x0001  /* Falcom Twist USB GPRS modem */
 334 #define FALCOM_SAMBA_PID        0x0005  /* Falcom Samba USB GPRS modem */
 335
 336 /*
 337  * SUUNTO product ids
 338  */
 339 #define FTDI_SUUNTO_SPORTS_PID  0xF680  /* Suunto Sports instrument */
 340
 341 /*
 342  * TTi (Thurlby Thandar Instruments)
 343  */
 344 #define TTI_VID                 0x103E  /* Vendor Id */
 345 #define TTI_QL355P_PID          0x03E8  /* TTi QL355P power supply */
 346
 347 /*
 348  * Definitions for B&B Electronics products.
 349  */
 350 #define BANDB_VID               0x0856  /* B&B Electronics Vendor ID */
 351 #define BANDB_USOTL4_PID        0xAC01  /* USOTL4 Isolated RS-485 Converter */
 352 #define BANDB_USTL4_PID         0xAC02  /* USTL4 RS-485 Converter */
 353 #define BANDB_USO9ML2_PID       0xAC03  /* USO9ML2 Isolated RS-232 Converter */
 354
 355 /*
 356  * RM Michaelides CANview USB (http://www.rmcan.com)
 357  * CAN fieldbus interface adapter, added by port GmbH www.port.de)
 358  * Ian Abbott changed the macro names for consistency.
 359  */
 360 #define FTDI_RM_CANVIEW_PID     0xfd60  /* Product Id */
 361
 362 /*
 363  * EVER Eco Pro UPS (http://www.ever.com.pl/)
 364  */
 365
 366 #define EVER_ECO_PRO_CDS        0xe520  /* RS-232 converter */
 367
 368 /*
 369  * 4N-GALAXY.DE PIDs for CAN-USB, USB-RS232, USB-RS422, USB-RS485,
 370  * USB-TTY activ, USB-TTY passiv.  Some PIDs are used by several devices
 371  * and I'm not entirely sure which are used by which.
 372  */
 373 #define FTDI_4N_GALAXY_DE_1_PID 0xF3C0
 374 #define FTDI_4N_GALAXY_DE_2_PID 0xF3C1
 375
 376 /*
 377  * Mobility Electronics products.
 378  */
 379 #define MOBILITY_VID                    0x1342
 380 #define MOBILITY_USB_SERIAL_PID         0x0202  /* EasiDock USB 200 serial */
 381
 382 /*
 383  * microHAM product IDs (http://www.microham.com).
 384  * Submitted by Justin Burket (KL1RL) <zorton@jtan.com>
 385  * and Mike Studer (K6EEP) <k6eep@hamsoftware.org>.
 386  * Ian Abbott <abbotti@mev.co.uk> added a few more from the driver INF file.
 387  */
 388 #define FTDI_MHAM_KW_PID 0xEEE8         /* USB-KW interface */
 389 #define FTDI_MHAM_YS_PID 0xEEE9         /* USB-YS interface */
 390 #define FTDI_MHAM_Y6_PID 0xEEEA         /* USB-Y6 interface */
 391 #define FTDI_MHAM_Y8_PID 0xEEEB         /* USB-Y8 interface */
 392 #define FTDI_MHAM_IC_PID 0xEEEC         /* USB-IC interface */
 393 #define FTDI_MHAM_DB9_PID 0xEEED        /* USB-DB9 interface */
 394 #define FTDI_MHAM_RS232_PID 0xEEEE      /* USB-RS232 interface */
 395 #define FTDI_MHAM_Y9_PID 0xEEEF         /* USB-Y9 interface */
 396
 397 /*
 398  * Active Robots product ids.
 399  */
 400 #define FTDI_ACTIVE_ROBOTS_PID  0xE548  /* USB comms board */
 401
 402 /*
 403  * Xsens Technologies BV products (http://www.xsens.com).
 404  */
 405 #define XSENS_CONVERTER_0_PID   0xD388
 406 #define XSENS_CONVERTER_1_PID   0xD389
 407 #define XSENS_CONVERTER_2_PID   0xD38A
 408 #define XSENS_CONVERTER_3_PID   0xD38B
 409 #define XSENS_CONVERTER_4_PID   0xD38C
 410 #define XSENS_CONVERTER_5_PID   0xD38D
 411 #define XSENS_CONVERTER_6_PID   0xD38E
 412 #define XSENS_CONVERTER_7_PID   0xD38F
 413
 414 /*
 415  * Teratronik product ids.
 416  * Submitted by O. Wölfelschneider.
 417  */
 418 #define FTDI_TERATRONIK_VCP_PID  0xEC88 /* Teratronik device (preferring VCP driver on windows) */
 419 #define FTDI_TERATRONIK_D2XX_PID 0xEC89 /* Teratronik device (preferring D2XX driver on windows) */
 420
 421 /*
 422  * Evolution Robotics products (http://www.evolution.com/).
 423  * Submitted by Shawn M. Lavelle.
 424  */
 425 #define EVOLUTION_VID           0xDEEE  /* Vendor ID */
 426 #define EVOLUTION_ER1_PID       0x0300  /* ER1 Control Module */
 427
 428 /* Pyramid Computer GmbH */
 429 #define FTDI_PYRAMID_PID        0xE6C8  /* Pyramid Appliance Display */
 430
 431 /*
 432  * Posiflex inc retail equipment (http://www.posiflex.com.tw)
 433  */
 434 #define POSIFLEX_VID            0x0d3a  /* Vendor ID */
 435 #define POSIFLEX_PP7000_PID     0x0300  /* PP-7000II thermal printer */
 436
 437 /*
 438  * Westrex International devices submitted by Cory Lee
 439  */
 440 #define FTDI_WESTREX_MODEL_777_PID      0xDC00  /* Model 777 */
 441 #define FTDI_WESTREX_MODEL_8900F_PID    0xDC01  /* Model 8900F */
 442
 443 /*
 444  * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com)
 445  */
 446 #define FTDI_RRCIRKITS_LOCOBUFFER_PID   0xc7d0  /* LocoBuffer USB */
 447
 448 /*
 449  * Eclo (http://www.eclo.pt/) product IDs.
 450  * PID 0xEA90 submitted by Martin Grill.
 451  */
 452 #define FTDI_ECLO_COM_1WIRE_PID 0xEA90  /* COM to 1-Wire USB adaptor */
 453
 454 /*
 455  * Papouch products (http://www.papouch.com/)
 456  * Submitted by Folkert van Heusden
 457  */
 458
 459 #define PAPOUCH_VID                     0x5050  /* Vendor ID */
 460 #define PAPOUCH_TMU_PID                 0x0400  /* TMU USB Thermometer */
 461
 462 /*
 463  * ACG Identification Technologies GmbH products (http://www.acg.de/).
 464  * Submitted by anton -at- goto10 -dot- org.
 465  */
 466 #define FTDI_ACG_HFDUAL_PID             0xDD20  /* HF Dual ISO Reader (RFID) */
 467
 468 /*
 469  * Yost Engineering, Inc. products (www.yostengineering.com).
 470  * PID 0xE050 submitted by Aaron Prose.
 471  */
 472 #define FTDI_YEI_SERVOCENTER31_PID      0xE050  /* YEI ServoCenter3.1 USB */
 473
 474 /*
 475  * ThorLabs USB motor drivers
 476  */
 477 #define FTDI_THORLABS_PID               0xfaf0 /* ThorLabs USB motor drivers */
 478
 479 /*
 480  * Testo products (http://www.testo.com/)
 481  * Submitted by Colin Leroy
 482  */
 483 #define TESTO_VID                       0x128D
 484 #define TESTO_USB_INTERFACE_PID         0x0001
 485
 486 /*
 487  * Gamma Scout (http://gamma-scout.com/). Submitted by rsc@runtux.com.
 488  */
 489 #define FTDI_GAMMA_SCOUT_PID            0xD678  /* Gamma Scout online */
 490
 491 /*
 492  * Tactrix OpenPort (ECU) devices.
 493  * OpenPort 1.3M submitted by Donour Sizemore.
 494  * OpenPort 1.3S and 1.3U submitted by Ian Abbott.
 495  */
 496 #define FTDI_TACTRIX_OPENPORT_13M_PID   0xCC48  /* OpenPort 1.3 Mitsubishi */
 497 #define FTDI_TACTRIX_OPENPORT_13S_PID   0xCC49  /* OpenPort 1.3 Subaru */
 498 #define FTDI_TACTRIX_OPENPORT_13U_PID   0xCC4A  /* OpenPort 1.3 Universal */
 499
 500 /*
 501  * Telldus Technologies
 502  */
 503 #define TELLDUS_VID                     0x1781  /* Vendor ID */
 504 #define TELLDUS_TELLSTICK_PID           0x0C30  /* RF control dongle 433 MHz using FT232RL */
 505
 506 /*
 507  * IBS elektronik product ids
 508  * Submitted by Thomas Schleusener
 509  */
 510 #define FTDI_IBS_US485_PID      0xff38  /* IBS US485 (USB<-->RS422/485 interface) */
 511 #define FTDI_IBS_PICPRO_PID     0xff39  /* IBS PIC-Programmer */
 512 #define FTDI_IBS_PCMCIA_PID     0xff3a  /* IBS Card reader for PCMCIA SRAM-cards */
 513 #define FTDI_IBS_PK1_PID        0xff3b  /* IBS PK1 - Particel counter */
 514 #define FTDI_IBS_RS232MON_PID   0xff3c  /* IBS RS232 - Monitor */
 515 #define FTDI_IBS_APP70_PID      0xff3d  /* APP 70 (dust monitoring system) */
 516 #define FTDI_IBS_PEDO_PID       0xff3e  /* IBS PEDO-Modem (RF modem 868.35 MHz) */
 517 #define FTDI_IBS_PROD_PID       0xff3f  /* future device */
 518
 519 /* Commands */
 520 #define FTDI_SIO_RESET          0 /* Reset the port */
 521 #define FTDI_SIO_MODEM_CTRL     1 /* Set the modem control register */
 522 #define FTDI_SIO_SET_FLOW_CTRL  2 /* Set flow control register */
 523 #define FTDI_SIO_SET_BAUD_RATE  3 /* Set baud rate */
 524 #define FTDI_SIO_SET_DATA       4 /* Set the data characteristics of the port */
 525 #define FTDI_SIO_GET_MODEM_STATUS       5 /* Retrieve current value of modern status register */
 526 #define FTDI_SIO_SET_EVENT_CHAR 6 /* Set the event character */
 527 #define FTDI_SIO_SET_ERROR_CHAR 7 /* Set the error character */
 528 #define FTDI_SIO_SET_LATENCY_TIMER      9 /* Set the latency timer */
 529 #define FTDI_SIO_GET_LATENCY_TIMER      10 /* Get the latency timer */
 530
 531
 532 /*
 533  *   BmRequestType:  1100 0000b
 534  *   bRequest:       FTDI_E2_READ
 535  *   wValue:         0
 536  *   wIndex:         Address of word to read
 537  *   wLength:        2
 538  *   Data:           Will return a word of data from E2Address
 539  *
 540  */
 541
 542 /* Port Identifier Table */
 543 #define PIT_DEFAULT             0 /* SIOA */
 544 #define PIT_SIOA                1 /* SIOA */
 545 /* The device this driver is tested with one has only one port */
 546 #define PIT_SIOB                2 /* SIOB */
 547 #define PIT_PARALLEL            3 /* Parallel */
 548
 549 /* FTDI_SIO_RESET */
 550 #define FTDI_SIO_RESET_REQUEST FTDI_SIO_RESET
 551 #define FTDI_SIO_RESET_REQUEST_TYPE 0x40
 552 #define FTDI_SIO_RESET_SIO 0
 553 #define FTDI_SIO_RESET_PURGE_RX 1
 554 #define FTDI_SIO_RESET_PURGE_TX 2
 555
 556 /*
 557  * BmRequestType:  0100 0000B
 558  * bRequest:       FTDI_SIO_RESET
 559  * wValue:         Control Value
 560  *                   0 = Reset SIO
 561  *                   1 = Purge RX buffer
 562  *                   2 = Purge TX buffer
 563  * wIndex:         Port
 564  * wLength:        0
 565  * Data:           None
 566  *
 567  * The Reset SIO command has this effect:
 568  *
 569  *    Sets flow control set to 'none'
 570  *    Event char = $0D
 571  *    Event trigger = disabled
 572  *    Purge RX buffer
 573  *    Purge TX buffer
 574  *    Clear DTR
 575  *    Clear RTS
 576  *    baud and data format not reset
 577  *
 578  * The Purge RX and TX buffer commands affect nothing except the buffers
 579  *
 580    */
 581
 582 /* FTDI_SIO_SET_BAUDRATE */
 583 #define FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE 0x40
 584 #define FTDI_SIO_SET_BAUDRATE_REQUEST 3
 585
 586 /*
 587  * BmRequestType:  0100 0000B
 588  * bRequest:       FTDI_SIO_SET_BAUDRATE
 589  * wValue:         BaudDivisor value - see below
 590  * wIndex:         Port
 591  * wLength:        0
 592  * Data:           None
 593  * The BaudDivisor values are calculated as follows:
 594  * - BaseClock is either 12000000 or 48000000 depending on the device. FIXME: I wish
 595  *   I knew how to detect old chips to select proper base clock!
 596  * - BaudDivisor is a fixed point number encoded in a funny way.
 597  *   (--WRONG WAY OF THINKING--)
 598  *   BaudDivisor is a fixed point number encoded with following bit weighs:
 599  *   (-2)(-1)(13..0). It is a radical with a denominator of 4, so values
 600  *   end with 0.0 (00...), 0.25 (10...), 0.5 (01...), and 0.75 (11...).
 601  *   (--THE REALITY--)
 602  *   The both-bits-set has quite different meaning from 0.75 - the chip designers
 603  *   have decided it to mean 0.125 instead of 0.75.
 604  *   This info looked up in FTDI application note "FT8U232 DEVICES \ Data Rates
 605  *   and Flow Control Consideration for USB to RS232".
 606  * - BaudDivisor = (BaseClock / 16) / BaudRate, where the (=) operation should
 607  *   automagically re-encode the resulting value to take fractions into consideration.
 608  * As all values are integers, some bit twiddling is in order:
 609  *   BaudDivisor = (BaseClock / 16 / BaudRate) |
 610  *   (((BaseClock / 2 / BaudRate) & 4) ? 0x4000    // 0.5
 611  *    : ((BaseClock / 2 / BaudRate) & 2) ? 0x8000  // 0.25
 612  *    : ((BaseClock / 2 / BaudRate) & 1) ? 0xc000  // 0.125
 613  *    : 0)
 614  *
 615  * For the FT232BM, a 17th divisor bit was introduced to encode the multiples
 616  * of 0.125 missing from the FT8U232AM.  Bits 16 to 14 are coded as follows
 617  * (the first four codes are the same as for the FT8U232AM, where bit 16 is
 618  * always 0):
 619  *   000 - add .000 to divisor
 620  *   001 - add .500 to divisor
 621  *   010 - add .250 to divisor
 622  *   011 - add .125 to divisor
 623  *   100 - add .375 to divisor
 624  *   101 - add .625 to divisor
 625  *   110 - add .750 to divisor
 626  *   111 - add .875 to divisor
 627  * Bits 15 to 0 of the 17-bit divisor are placed in the urb value.  Bit 16 is
 628  * placed in bit 0 of the urb index.
 629  *
 630  * Note that there are a couple of special cases to support the highest baud
 631  * rates.  If the calculated divisor value is 1, this needs to be replaced with
 632  * 0.  Additionally for the FT232BM, if the calculated divisor value is 0x4001
 633  * (1.5), this needs to be replaced with 0x0001 (1) (but this divisor value is
 634  * not supported by the FT8U232AM).
 635  */
 636
 637 typedef enum {
 638         SIO = 1,
 639         FT8U232AM = 2,
 640         FT232BM = 3,
 641         FT2232C = 4,
 642 } ftdi_chip_type_t;
 643
 644 typedef enum {
 645  ftdi_sio_b300 = 0,
 646  ftdi_sio_b600 = 1,
 647  ftdi_sio_b1200 = 2,
 648  ftdi_sio_b2400 = 3,
 649  ftdi_sio_b4800 = 4,
 650  ftdi_sio_b9600 = 5,
 651  ftdi_sio_b19200 = 6,
 652  ftdi_sio_b38400 = 7,
 653  ftdi_sio_b57600 = 8,
 654  ftdi_sio_b115200 = 9
 655 } FTDI_SIO_baudrate_t ;
 656
 657 /*
 658  * The ftdi_8U232AM_xxMHz_byyy constants have been removed. The encoded divisor values
 659  * are calculated internally.
 660  */
 661
 662 #define FTDI_SIO_SET_DATA_REQUEST FTDI_SIO_SET_DATA
 663 #define FTDI_SIO_SET_DATA_REQUEST_TYPE 0x40
 664 #define FTDI_SIO_SET_DATA_PARITY_NONE (0x0 << 8 )
 665 #define FTDI_SIO_SET_DATA_PARITY_ODD (0x1 << 8 )
 666 #define FTDI_SIO_SET_DATA_PARITY_EVEN (0x2 << 8 )
 667 #define FTDI_SIO_SET_DATA_PARITY_MARK (0x3 << 8 )
 668 #define FTDI_SIO_SET_DATA_PARITY_SPACE (0x4 << 8 )
 669 #define FTDI_SIO_SET_DATA_STOP_BITS_1 (0x0 << 11 )
 670 #define FTDI_SIO_SET_DATA_STOP_BITS_15 (0x1 << 11 )
 671 #define FTDI_SIO_SET_DATA_STOP_BITS_2 (0x2 << 11 )
 672 #define FTDI_SIO_SET_BREAK (0x1 << 14)
 673 /* FTDI_SIO_SET_DATA */
 674
 675 /*
 676  * BmRequestType:  0100 0000B
 677  * bRequest:       FTDI_SIO_SET_DATA
 678  * wValue:         Data characteristics (see below)
 679  * wIndex:         Port
 680  * wLength:        0
 681  * Data:           No
 682  *
 683  * Data characteristics
 684  *
 685  *   B0..7   Number of data bits
 686  *   B8..10  Parity
 687  *           0 = None
 688  *           1 = Odd
 689  *           2 = Even
 690  *           3 = Mark
 691  *           4 = Space
 692  *   B11..13 Stop Bits
 693  *           0 = 1
 694  *           1 = 1.5
 695  *           2 = 2
 696  *   B14
 697  *           1 = TX ON (break)
 698  *           0 = TX OFF (normal state)
 699  *   B15 Reserved
 700  *
 701  */
 702
 703
 704
 705 /* FTDI_SIO_MODEM_CTRL */
 706 #define FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE 0x40
 707 #define FTDI_SIO_SET_MODEM_CTRL_REQUEST FTDI_SIO_MODEM_CTRL
 708
 709 /*
 710  * BmRequestType:   0100 0000B
 711  * bRequest:        FTDI_SIO_MODEM_CTRL
 712  * wValue:          ControlValue (see below)
 713  * wIndex:          Port
 714  * wLength:         0
 715  * Data:            None
 716  *
 717  * NOTE: If the device is in RTS/CTS flow control, the RTS set by this
 718  * command will be IGNORED without an error being returned
 719  * Also - you can not set DTR and RTS with one control message
 720  */
 721
 722 #define FTDI_SIO_SET_DTR_MASK 0x1
 723 #define FTDI_SIO_SET_DTR_HIGH ( 1 | ( FTDI_SIO_SET_DTR_MASK  << 8))
 724 #define FTDI_SIO_SET_DTR_LOW  ( 0 | ( FTDI_SIO_SET_DTR_MASK  << 8))
 725 #define FTDI_SIO_SET_RTS_MASK 0x2
 726 #define FTDI_SIO_SET_RTS_HIGH ( 2 | ( FTDI_SIO_SET_RTS_MASK << 8 ))
 727 #define FTDI_SIO_SET_RTS_LOW ( 0 | ( FTDI_SIO_SET_RTS_MASK << 8 ))
 728
 729 /*
 730  * ControlValue
 731  * B0    DTR state
 732  *          0 = reset
 733  *          1 = set
 734  * B1    RTS state
 735  *          0 = reset
 736  *          1 = set
 737  * B2..7 Reserved
 738  * B8    DTR state enable
 739  *          0 = ignore
 740  *          1 = use DTR state
 741  * B9    RTS state enable
 742  *          0 = ignore
 743  *          1 = use RTS state
 744  * B10..15 Reserved
 745  */
 746
 747 /* FTDI_SIO_SET_FLOW_CTRL */
 748 #define FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE 0x40
 749 #define FTDI_SIO_SET_FLOW_CTRL_REQUEST FTDI_SIO_SET_FLOW_CTRL
 750 #define FTDI_SIO_DISABLE_FLOW_CTRL 0x0
 751 #define FTDI_SIO_RTS_CTS_HS (0x1 << 8)
 752 #define FTDI_SIO_DTR_DSR_HS (0x2 << 8)
 753 #define FTDI_SIO_XON_XOFF_HS (0x4 << 8)
 754 /*
 755  *   BmRequestType:  0100 0000b
 756  *   bRequest:       FTDI_SIO_SET_FLOW_CTRL
 757  *   wValue:         Xoff/Xon
 758  *   wIndex:         Protocol/Port - hIndex is protocl / lIndex is port
 759  *   wLength:        0
 760  *   Data:           None
 761  *
 762  * hIndex protocol is:
 763  *   B0 Output handshaking using RTS/CTS
 764  *       0 = disabled
 765  *       1 = enabled
 766  *   B1 Output handshaking using DTR/DSR
 767  *       0 = disabled
 768  *       1 = enabled
 769  *   B2 Xon/Xoff handshaking
 770  *       0 = disabled
 771  *       1 = enabled
 772  *
 773  * A value of zero in the hIndex field disables handshaking
 774  *
 775  * If Xon/Xoff handshaking is specified, the hValue field should contain the XOFF character
 776  * and the lValue field contains the XON character.
 777  */
 778
 779 /*
 780  * FTDI_SIO_GET_LATENCY_TIMER
 781  *
 782  * Set the timeout interval. The FTDI collects data from the slave
 783  * device, transmitting it to the host when either A) 62 bytes are
 784  * received, or B) the timeout interval has elapsed and the buffer
 785  * contains at least 1 byte.  Setting this value to a small number
 786  * can dramatically improve performance for applications which send
 787  * small packets, since the default value is 16ms.
 788  */
 789 #define  FTDI_SIO_GET_LATENCY_TIMER_REQUEST FTDI_SIO_GET_LATENCY_TIMER
 790 #define  FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE 0xC0
 791
 792 /*
 793  *  BmRequestType:   1100 0000b
 794  *  bRequest:        FTDI_SIO_GET_LATENCY_TIMER
 795  *  wValue:          0
 796  *  wIndex:          Port
 797  *  wLength:         0
 798  *  Data:            latency (on return)
 799  */
 800
 801 /*
 802  * FTDI_SIO_SET_LATENCY_TIMER
 803  *
 804  * Set the timeout interval. The FTDI collects data from the slave
 805  * device, transmitting it to the host when either A) 62 bytes are
 806  * received, or B) the timeout interval has elapsed and the buffer
 807  * contains at least 1 byte.  Setting this value to a small number
 808  * can dramatically improve performance for applications which send
 809  * small packets, since the default value is 16ms.
 810  */
 811 #define  FTDI_SIO_SET_LATENCY_TIMER_REQUEST FTDI_SIO_SET_LATENCY_TIMER
 812 #define  FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE 0x40
 813
 814 /*
 815  *  BmRequestType:   0100 0000b
 816  *  bRequest:        FTDI_SIO_SET_LATENCY_TIMER
 817  *  wValue:          Latency (milliseconds)
 818  *  wIndex:          Port
 819  *  wLength:         0
 820  *  Data:            None
 821  *
 822  * wValue:
 823  *   B0..7   Latency timer
 824  *   B8..15  0
 825  *
 826  */
 827
 828 /*
 829  * FTDI_SIO_SET_EVENT_CHAR
 830  *
 831  * Set the special event character for the specified communications port.
 832  * If the device sees this character it will immediately return the
 833  * data read so far - rather than wait 40ms or until 62 bytes are read
 834  * which is what normally happens.
 835  */
 836
 837
 838 #define  FTDI_SIO_SET_EVENT_CHAR_REQUEST FTDI_SIO_SET_EVENT_CHAR
 839 #define  FTDI_SIO_SET_EVENT_CHAR_REQUEST_TYPE 0x40
 840
 841
 842 /*
 843  *  BmRequestType:   0100 0000b
 844  *  bRequest:        FTDI_SIO_SET_EVENT_CHAR
 845  *  wValue:          EventChar
 846  *  wIndex:          Port
 847  *  wLength:         0
 848  *  Data:            None
 849  *
 850  * wValue:
 851  *   B0..7   Event Character
 852  *   B8      Event Character Processing
 853  *             0 = disabled
 854  *             1 = enabled
 855  *   B9..15  Reserved
 856  *
 857  */
 858
 859 /* FTDI_SIO_SET_ERROR_CHAR */
 860
 861 /* Set the parity error replacement character for the specified communications port */
 862
 863 /*
 864  *  BmRequestType:  0100 0000b
 865  *  bRequest:       FTDI_SIO_SET_EVENT_CHAR
 866  *  wValue:         Error Char
 867  *  wIndex:         Port
 868  *  wLength:        0
 869  *  Data:           None
 870  *
 871  *Error Char
 872  *  B0..7  Error Character
 873  *  B8     Error Character Processing
 874  *           0 = disabled
 875  *           1 = enabled
 876  *  B9..15 Reserved
 877  *
 878  */
 879
 880 /* FTDI_SIO_GET_MODEM_STATUS */
 881 /* Retrieve the current value of the modem status register */
 882
 883 #define FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE 0xc0
 884 #define FTDI_SIO_GET_MODEM_STATUS_REQUEST FTDI_SIO_GET_MODEM_STATUS
 885 #define FTDI_SIO_CTS_MASK 0x10
 886 #define FTDI_SIO_DSR_MASK 0x20
 887 #define FTDI_SIO_RI_MASK  0x40
 888 #define FTDI_SIO_RLSD_MASK 0x80
 889 /*
 890  *   BmRequestType:   1100 0000b
 891  *   bRequest:        FTDI_SIO_GET_MODEM_STATUS
 892  *   wValue:          zero
 893  *   wIndex:          Port
 894  *   wLength:         1
 895  *   Data:            Status
 896  *
 897  * One byte of data is returned
 898  * B0..3 0
 899  * B4    CTS
 900  *         0 = inactive
 901  *         1 = active
 902  * B5    DSR
 903  *         0 = inactive
 904  *         1 = active
 905  * B6    Ring Indicator (RI)
 906  *         0 = inactive
 907  *         1 = active
 908  * B7    Receive Line Signal Detect (RLSD)
 909  *         0 = inactive
 910  *         1 = active
 911  */
 912
 913
 914
 915 /* Descriptors returned by the device
 916  *
 917  *  Device Descriptor
 918  *
 919  * Offset       Field           Size    Value   Description
 920  * 0    bLength         1       0x12    Size of descriptor in bytes
 921  * 1    bDescriptorType 1       0x01    DEVICE Descriptor Type
 922  * 2    bcdUSB          2       0x0110  USB Spec Release Number
 923  * 4    bDeviceClass    1       0x00    Class Code
 924  * 5    bDeviceSubClass 1       0x00    SubClass Code
 925  * 6    bDeviceProtocol 1       0x00    Protocol Code
 926  * 7    bMaxPacketSize0 1       0x08    Maximum packet size for endpoint 0
 927  * 8    idVendor        2       0x0403  Vendor ID
 928  * 10   idProduct       2       0x8372  Product ID (FTDI_SIO_PID)
 929  * 12   bcdDevice       2       0x0001  Device release number
 930  * 14   iManufacturer   1       0x01    Index of man. string desc
 931  * 15   iProduct        1       0x02    Index of prod string desc
 932  * 16   iSerialNumber   1       0x02    Index of serial nmr string desc
 933  * 17   bNumConfigurations 1    0x01    Number of possible configurations
 934  *
 935  * Configuration Descriptor
 936  *
 937  * Offset       Field                   Size    Value
 938  * 0    bLength                 1       0x09    Size of descriptor in bytes
 939  * 1    bDescriptorType         1       0x02    CONFIGURATION Descriptor Type
 940  * 2    wTotalLength            2       0x0020  Total length of data
 941  * 4    bNumInterfaces          1       0x01    Number of interfaces supported
 942  * 5    bConfigurationValue     1       0x01    Argument for SetCOnfiguration() req
 943  * 6    iConfiguration          1       0x02    Index of config string descriptor
 944  * 7    bmAttributes            1       0x20    Config characteristics Remote Wakeup
 945  * 8    MaxPower                1       0x1E    Max power consumption
 946  *
 947  * Interface Descriptor
 948  *
 949  * Offset       Field                   Size    Value
 950  * 0    bLength                 1       0x09    Size of descriptor in bytes
 951  * 1    bDescriptorType         1       0x04    INTERFACE Descriptor Type
 952  * 2    bInterfaceNumber        1       0x00    Number of interface
 953  * 3    bAlternateSetting       1       0x00    Value used to select alternate
 954  * 4    bNumEndpoints           1       0x02    Number of endpoints
 955  * 5    bInterfaceClass         1       0xFF    Class Code
 956  * 6    bInterfaceSubClass      1       0xFF    Subclass Code
 957  * 7    bInterfaceProtocol      1       0xFF    Protocol Code
 958  * 8    iInterface              1       0x02    Index of interface string description
 959  *
 960  * IN Endpoint Descriptor
 961  *
 962  * Offset       Field                   Size    Value
 963  * 0    bLength                 1       0x07    Size of descriptor in bytes
 964  * 1    bDescriptorType         1       0x05    ENDPOINT descriptor type
 965  * 2    bEndpointAddress        1       0x82    Address of endpoint
 966  * 3    bmAttributes            1       0x02    Endpoint attributes - Bulk
 967  * 4    bNumEndpoints           2       0x0040  maximum packet size
 968  * 5    bInterval               1       0x00    Interval for polling endpoint
 969  *
 970  * OUT Endpoint Descriptor
 971  *
 972  * Offset       Field                   Size    Value
 973  * 0    bLength                 1       0x07    Size of descriptor in bytes
 974  * 1    bDescriptorType         1       0x05    ENDPOINT descriptor type
 975  * 2    bEndpointAddress        1       0x02    Address of endpoint
 976  * 3    bmAttributes            1       0x02    Endpoint attributes - Bulk
 977  * 4    bNumEndpoints           2       0x0040  maximum packet size
 978  * 5    bInterval               1       0x00    Interval for polling endpoint
 979  *
 980  * DATA FORMAT
 981  *
 982  * IN Endpoint
 983  *
 984  * The device reserves the first two bytes of data on this endpoint to contain the current
 985  * values of the modem and line status registers. In the absence of data, the device
 986  * generates a message consisting of these two status bytes every 40 ms
 987  *
 988  * Byte 0: Modem Status
 989  *
 990  * Offset       Description
 991  * B0   Reserved - must be 1
 992  * B1   Reserved - must be 0
 993  * B2   Reserved - must be 0
 994  * B3   Reserved - must be 0
 995  * B4   Clear to Send (CTS)
 996  * B5   Data Set Ready (DSR)
 997  * B6   Ring Indicator (RI)
 998  * B7   Receive Line Signal Detect (RLSD)
 999  *
1000  * Byte 1: Line Status
1001  *
1002  * Offset       Description
1003  * B0   Data Ready (DR)
1004  * B1   Overrun Error (OE)
1005  * B2   Parity Error (PE)
1006  * B3   Framing Error (FE)
1007  * B4   Break Interrupt (BI)
1008  * B5   Transmitter Holding Register (THRE)
1009  * B6   Transmitter Empty (TEMT)
1010  * B7   Error in RCVR FIFO
1011  *
1012  */
1013 #define FTDI_RS0_CTS    (1 << 4)
1014 #define FTDI_RS0_DSR    (1 << 5)
1015 #define FTDI_RS0_RI     (1 << 6)
1016 #define FTDI_RS0_RLSD   (1 << 7)
1017
1018 #define FTDI_RS_DR  1
1019 #define FTDI_RS_OE (1<<1)
1020 #define FTDI_RS_PE (1<<2)
1021 #define FTDI_RS_FE (1<<3)
1022 #define FTDI_RS_BI (1<<4)
1023 #define FTDI_RS_THRE (1<<5)
1024 #define FTDI_RS_TEMT (1<<6)
1025 #define FTDI_RS_FIFO  (1<<7)
1026
1027 /*
1028  * OUT Endpoint
1029  *
1030  * This device reserves the first bytes of data on this endpoint contain the length
1031  * and port identifier of the message. For the FTDI USB Serial converter the port
1032  * identifier is always 1.
1033  *
1034  * Byte 0: Line Status
1035  *
1036  * Offset       Description
1037  * B0   Reserved - must be 1
1038  * B1   Reserved - must be 0
1039  * B2..7        Length of message - (not including Byte 0)
1040  *
1041  */
1042