1 2011-05-17 Nick Clifton <nickc@redhat.com>
3 * config/tc-m32r.c (md_show_usage): Fix typos in descriptions.
4 * config/tc-mt.c (md_assemble): Fix typos in warning messages.
5 * cond.c (s_else): Fix typos in error messages.
6 * config/tc-pj.c (md_assemble): Fix typo in error message.
8 2011-05-16 Hans-Peter Nilsson <hp@axis.com>
10 * config/tc-cris.c (md_parse_option) <OPTION_PIC>: Error if not
12 (md_show_usage): Only mention --pic if the assembler can generate
14 * doc/c-cris.texi (CRIS-Opt): Mention that generating ELF is a
15 prerequisite for --pic being a valid option.
17 2011-05-13 Frederic Marchal <fmarchal@perso.be>
20 * config/tc-v850.c (parse_register_list): Correct error string.
22 2011-05-12 Quentin Neill <quentin.neill@amd.com>
24 * config/tc-i386.c (cpu_arch): Rename PROCESSOR_BDVER1 to PROCESSOR_BD.
25 (i386_align_code): Ditto
27 2011-05-12 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
30 * config/tc-arm.c (parse_big_immediate): Fix parsing of 64-bit
31 immediates on 32-bit hosts.
33 2011-05-10 Quentin Neill <quentin.neill@amd.com>
35 * config/tc-i386.c (cpu_arch): Add bdver2 and rename
36 PROCESSOR_BDVER1 to PROCESSOR_BDVER.
37 (i386_align_code): Rename PROCESSOR_BDVER1.
38 (processor_type): Ditto.
39 * doc/c-i386.texi: Add bdver2.
41 2011-05-10 Alan Modra <amodra@gmail.com>
43 * dw2gencfi.c (tc_cfi_endproc): Avoid "set but not used" error.
45 2011-05-09 Paul Brook <paul@codesourcery.com>
47 * config/tc-tic6x.c (streq): Define.
48 (tic6x_get_unwind): New.
49 (s_tic6x_cantunwind, s_tic6x_handlerdata, s_tic6x_endp,
50 s_tic6x_personalityindex, s_tic6x_personality): New functions.
51 (md_pseudo_table): Add "endp", "handlerdata", "personalityindex",
52 "personality" and "cantunwind".
53 (tic6x_regname_to_dw2regnum, tic6x_frame_initial_instructions,
54 tic6x_start_unwind_section, tic6x_unwind_frame_regs,
55 tic6x_pop_rts_offset_little, tic6x_pop_rts_offset_big,
56 tic6x_unwind_reg_from_dwarf, tic6x_flush_unwind_word,
57 tic6x_unwind_byte, tic6x_unwind_2byte, tic6x_unwind_uleb,
58 tic6x_cfi_startproc, output_exidx_entry, tic6x_output_unwinding,
59 tic6x_cfi_endproc): New.
60 * config/tc-tic6x.h (TIC6X_NUM_UNWIND_REGS): Define.
61 (tic6x_unwind_info): New.
62 (tic6x_segment_info_type): Add marked_pr_dependency, unwind and
64 (TARGET_USE_CFIPOP, tc_regname_to_dw2regnum,
65 tc_cfi_frame_initial_instructions, DWARF2_DEFAULT_RETURN_COLUMN,
66 DWARF2_CIE_DATA_ALIGNMENT, tc_cfi_startproc, tc_cfi_endproc,
67 tc_cfi_section_name): Define.
68 * doc/c-tic6x.texi: Document new unwinding directives.
69 * dw2gencfi.c (tc_cfi_startproc, tc_cfi_endproc): Add default
71 (cfi_insn_data, fde_entry, CFI_adjust_cfa_offset, CFI_return_column,
72 CFI_rel_offset, CFI_escape, CFI_signal_frame, CFI_val_encoded_addr):
74 (CFI_EMIT_target): Define.
75 (dot_cfi_sections): Check tc_cfi_section_name.
76 (dot_cfi_startproc): Use tc_cfi_startproc.
77 (dot_cfi_endproc): Use tc_cfi_endproc.
78 * dw2gencfi.h (cfi_insn_data, fde_entry, CFI_adjust_cfa_offset,
79 CFI_return_column, CFI_rel_offset, CFI_escape, CFI_signal_frame,
80 CFI_val_encoded_addr): Move to here from dw2gencfi.c.
82 2011-05-07 Alan Modra <amodra@gmail.com>
84 * dw2gencfi.c (CUR_SEG, SET_CUR_SEG, HANDLED, SET_HANDLED): Define.
85 Use throughout in place of #if SUPPORT_FRAME_LINKONCE.
86 (struct fde_entry): Rename cseg to cur_seg.
87 (cfi_change_reg_numbers): Remove ATTRIBUTE_UNUSED.
88 (get_cfi_seg): Likewise. Use if (SUPPORT_FRAME_LINKONCE) rather
89 that #if SUPPORT_FRAME_LINKONCE.
90 (cfi_finish): Likewise.
92 2011-05-06 Tristan Gingold <gingold@adacore.com>
94 * read.c (s_comm_internal): Remove code for OBJ_VMS.
97 * write.c (write_object_file): Ditto.
98 * symbols.c (define_sym_at_dot): Ditto.
101 2011-05-05 Alan Modra <amodra@gmail.com>
103 * dw2gencfi.c (SUPPORT_FRAME_LINKONCE): Define. Use throughout
104 file to conditionally compile code added 2011-04-26.
105 (cfi_change_reg_numbers): Add ATTRIBUTE_UNUSED on params only used
106 when SUPPORT_FRAME_LINKONCE.
107 (get_cfi_seg): Likewise. Reintroduce old code for when not
108 SUPPORT_FRAME_LINKONCE.
109 (cfi_finish): Move get_cfi_seg calls out of loop when not
110 SUPPORT_FRAME_LINKONCE. Avoid unused var warning.
112 2011-05-03 Paul Brook <paul@codesourcery.com>
114 * config/tc-tic6x.c (s_ehtype): New function.
115 (md_pseudo_table): Add "ehtype".
116 (tic6x_fix_adjustable, md_apply_fix): BFD_RELOC_C6000_EHTYPE.
117 * doc/c-tic6x.texi: Document .ehtype directive.
119 2011-04-26 Kai Tietz <ktietz@redhat.com>
121 * dw2gencfi.c (dwcfi_seg_list): New struct.
122 (dwcfi_hash): New static hash variable.
123 (get_debugseg_name): New.
124 (alloc_debugseg_item): New.
125 (make_debug_seg): New.
126 (dwcfi_hash_insert): New.
127 (dwcfi_hash_find): New.
128 (dwcfi_hash_find_or_make): New.
129 (cfi_insn_data): New member cur_seg.
130 (cie_entry): Likewise.
131 (fde_entry): New cseg and handled members.
132 (alloc_fde_entry): Initialize cseg member.
133 (alloc_cfi_insn_data): Initialize cur_seg member.
134 (dot_cfi_sections): Compare for beginning of
135 section names via strncmp.
137 (cfi_finish): Treat link-once sections.
138 (is_now_linkonce_segment): New local helper.
139 (output_cie): Ignore cie entries not member of current
141 (output_fde): Likewise.
142 (select_cie_for_fde): Likewise.
143 (cfi_change_reg_numbers): Add new argument for current segment
144 and ignore insn elements, if not part of current segment.
145 * ehopt.c (get_cie_info): Use strncmp for
146 section name matching.
147 (heck_eh_frame): Likewise.
149 2011-04-20 Catherine Moore <clm@codesourcery.com>
150 David Ung <davidu@mips.com>
152 * config/mips.c (mips_cl_insn): Add new field complete_p.
153 (create_insn): Initialize complete_p to zero.
155 (fix_24k_align_to): New.
156 (fix_24k_store_info): Declare.
158 (fix_24k_record_store_info): New.
160 (nops_for_insn): Call nops_for_24k.
161 (append_insn): Move O_constant expression handling.
163 2011-04-20 Alan Modra <amodra@gmail.com>
165 * hash.c (set_gas_hash_table_size): Use bfd_hash_set_default_size.
166 (hash_new_sized): New function, split out from..
169 2011-04-19 Nick Clifton <nickc@redhat.com>
171 * config/tc-arm.c (v7m_psrs): Revert previous delta.
173 2011-04-18 Julian Brown <julian@codesourcery.com>
174 Nick Clifton <nickc@redhat.com>
176 * config/tc-arm.c (parse_psr): Use selected_cpu not cpu_variant to
177 detect M-profile targets.
178 (do_t_swi): Exclude v7 and higher variants from arm_ext_os test.
179 (v7m_psrs): Fix typo: basepri_max should be basepri_mask.
181 2011-04-14 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
183 * config/tc-s390.c (s390_machine): New prototype.
184 (md_pseudo_table): New pseudo-op .machine.
185 (s390_opcode_hash): Initialize to NULL.
186 (s390_parse_cpu): New function.
187 (md_parse_option): Use s390_parse_cpu.
188 (s390_setup_opcodes): New function.
189 (md_begin): Use s390_setup_opcodes.
190 (s390_machine): New hook handling the new .machine pseudo.
192 * doc/c-s390.texi: Document the new pseudo op .machine.
194 2011-04-12 H.J. Lu <hongjiu.lu@intel.com>
196 * config/tc-i386.c (i386_mach): Start error message with lower
198 (md_begin): Likewise.
199 (md_parse_option): Likewise.
200 (i386_target_format): Likewise.
201 (check_byte_reg): Likewise.
202 (check_long_reg): Likewise.
203 (check_qword_reg): Likewise.
204 (check_word_reg): Likewise.
206 2011-04-12 Nick Clifton <nickc@redhat.com>
209 * config/tc-arm.c (relax_branch): Do not relax branches to
210 preemptable global symbols.
212 2011-04-11 Julian Brown <julian@codesourcery.com>
214 * config/tc-arm.c (parse_psr): Add LHS argument. Improve support
216 (operand_parse_code): Replace OP_PSR with OP_wPSR and OP_rPSR.
218 (parse_operands): Likewise.
219 (do_mrs): Tweak error message for constraint.
220 (do_t_mrs): Update constraints for changes to APSR support.
221 (do_t_msr): Likewise. Don't set PSR_f flag here.
222 (psrs): Remove "g", "nzcvq", "nzcvqg".
223 (insns): Tweak entries for msr and mrs instructions.
225 2011-04-11 Kai Tietz <ktietz@redhat.com>
227 * config/tc-i386.c (x86_cons): Initialize adjust with zero.
229 2011-04-11 Nick Clifton <nickc@redhat.com>
231 * config/tc-i386.c (x86_cons): Define even for non-ELF targets.
232 * config/tc-i386.h (x86_cons): Always prototype.
234 * config/tc-cr16.c (getprocregp_image): Fix type of 'r' parameter
235 in order to avoid a compile time warning.
236 (getprocreg_image): Likewise.
238 2011-04-11 Alan Modra <amodra@gmail.com>
240 * config/tc-cr16.c (getprocreg_image): Correct range check.
241 (getprocregp_image): Likewise.
243 2011-04-06 Joseph Myers <joseph@codesourcery.com>
245 * configure.tgt (strongarm*be, strongarm*b, strongarm*,
246 xscale*be|xscale*b, xscale*): Remove architectures.
247 (thumb-*-coff, thumb-*-rtems*, thumb-*-elf, thumb-epoc-pe,
248 thumb-*-pe, xscale-*-coff, xscale-*-elf): Remove targets.
250 2011-04-01 Tristan Gingold <gingold@adacore.com>
252 * config/tc-ia64.c (md_apply_fix): Add a cast to avoid a warning.
254 2011-03-31 Bernd Schmidt <bernds@codesourcery.com>
256 * config/tc-tic6x.c (sbss_section, scom_section, scom_symbol): New
258 (md_begin): Initialize them.
259 (s_tic6x_scomm): New static function.
260 (md_pseudo_table): Add "scomm".
261 (tc_gen_reloc): Really undo all adjustments made by
262 bfd_install_relocation.
263 * doc/c-tic6x.texi: Document the .scomm directive.
265 2011-03-31 Tristan Gingold <gingold@adacore.com>
267 * dwarf2dbg.c (DWARF2_VERSION): Define.
268 (out_debug_line): Use it.
269 (out_debug_aranges): Ditto.
270 (out_debug_info): Ditto.
271 * config/tc-ia64.h (DWARF2_VERSION): Override it.
273 2011-03-30 Michael Snyder <msnyder@vmware.com>
275 * obj-elf.c (obj_elf_section): Free malloced name.
276 * macro.c (get_any_string): Free malloced br_buf.
277 (do_formals): Free 'formal'.
279 2011-03-30 Tristan Gingold <gingold@adacore.com>
281 * config/tc-ppc.c (ppc_frob_symbol): Convert stsym symbols value
282 to offset only if within is set.
283 (ppc_stabx): Reformat. For stsym stabs, add a check and set
284 within only for symbols.
286 2011-03-29 Richard Henderson <rth@redhat.com>
289 * config/tc-alpha.c (s_alpha_align): Don't auto-align a previous
290 label; zap alpha_insn_label.
292 2011-03-29 H.J. Lu <hongjiu.lu@intel.com>
294 * config/tc-i386.c (handle_quad): Properly handle multiple
297 2011-03-29 Mike Frysinger <vapier@gentoo.org>
299 * config/bfin-parse.y (BYTEUNPACK): Return yyerror when dest
300 reg $2 is the same as dest reg $4.
302 2011-03-29 Mike Frysinger <vapier@gentoo.org>
304 * config/bfin-parse.y (BYTEOP16M): Return yyerror when dest
305 reg $2 is the same as dest reg $4.
307 2011-03-29 Mike Frysinger <vapier@gentoo.org>
309 * config/bfin-parse.y (BYTEOP16P): Return yyerror when dest
310 reg $2 is the same as dest reg $4.
312 2011-03-28 Mike Frysinger <vapier@gentoo.org>
314 * config/bfin-parse.y (16bit acc add): Return yyerror when dest
315 reg $1 is the same as dest reg $7.
317 2011-03-28 H.J. Lu <hongjiu.lu@intel.com>
319 * config/tc-i386.c (handle_quad): New.
320 (md_pseudo_table): Add "quad".
322 2011-03-26 John Marino <binutils@marino.st>
324 * configure.tgt: Fix support for *-*-dragonfly*.
325 * config/tc-i386.c: define SVR4_COMMENT_CHARS for dragonfly.
326 * config/te-dragonfly.h: New file.
328 2011-03-24 Eric B. Weddington <eric.weddington@atmel.com>
330 * config/tc-avr.c (mcu_types): Add new devices: atmega325pa,
331 atmega3250pa, atmega3290pa, atmega16hvbrevb, atmega32hvbrevb,
333 * doc/c-avr.texi: Document new device names.
335 2011-03-24 Mike Frysinger <vapier@gentoo.org>
337 * config/bfin-parse.y (dual 32bit add/sub): Return yyerror when dest
338 reg $1 is the same as dest reg $7.
339 (quad 16bit add/sub): Return yyerror when dest reg $1 is the same as
342 2011-03-24 Mike Frysinger <vapier@gentoo.org>
344 * config/bfin-parse.y (check_macfuncs): Clarify error message when
345 P is mismatched. Check destination regno are off by one when P is
346 set, or are equal when P is not set.
348 2011-03-23 Mike Frysinger <vapier@gentoo.org>
350 * config/bfin-parse.y (SEARCH): Return yyerror when dest reg $2 is
351 the same as dest reg $4.
352 (BITMUX): Return yyerror when dest reg $3 is the same as dest reg $5.
354 2011-03-23 Eric B. Weddington <eric.weddington@atmel.com>
356 * config/tc-avr.c (mcu_types): Add new xmega devices: atxmega64a1u,
357 atxmega128a1u, atxmega16x1, atxmega32x1, atxmega128b1, atxmega256a3bu.
358 * doc/c-avr.texi: Document new device names.
360 2011-03-22 Eric B. Weddington <eric.weddington@atmel.com>
362 * config/tc-avr.c (struct avr_opcodes_s): Add opcode field.
363 (AVR_INSN): Change definition to match.
364 (avr_opcodes): Likewise, change to match.
365 (mcu_types): Add XMEGA architecture names and new XMEGA device names.
366 (md_show_usage): Add XMEGA architecture names.
367 (avr_operand): Add 'E' constraint for DES instruction of XMEGA devices.
368 Add support for SPM Z+ instruction.
369 * doc/c-avr.texi: Add documentation for XMEGA architectures and
372 2011-03-21 Eric B. Weddington <eric.weddington@atmel.com>
374 * config/tc-avr.c (md_show_usage): Add "Assembler" text to output.
376 2011-03-18 Alan Modra <amodra@gmail.com>
378 * config/obj-elf.c (elf_frob_symbol): Report S_SET_SIZE symbol
379 on .size expression errors rather than symbols in the size expression.
381 2011-03-18 Alan Modra <amodra@gmail.com>
383 * input-scrub.c (line_numberT): Delete.
384 (input_scrub_close): Reset line counters.
385 * messages.c (as_show_where): Don't print invalid line number.
386 (as_warn_internal, as_bad_internal): Likewise.
388 2011-03-18 Alan Modra <amodra@gmail.com>
390 * read.c (read_a_source_file): Remove md_after_pass_hook.
391 Move "quit" label before set of dot_symbol.
392 * config/tc-d10v.h (md_after_pass_hook): Don't define.
393 * config/tc-d30v.h (md_after_pass_hook): Likewise.
394 * config/tc-m32r.h (md_after_pass_hook): Likewise.
395 (md_cleanup): Define to call m32r_fill_insn.
397 2011-03-18 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
399 * config/tc-s390.c (md_parse_option): Add -march=all option which
400 switches to the highest available CPU.
402 2011-03-17 Alan Modra <amodra@gmail.com>
405 * expr.c (operand): Correct passing of "mode" to expr.
406 * read.c (do_org): Allow expr_section.
407 (get_known_segmented_expression): Don't assert anything about the
410 2011-03-16 H.J. Lu <hongjiu.lu@intel.com>
412 * as.c (show_usage): Add --size-check=.
413 (parse_args): Add and handle OPTION_SIZE_CHECK.
415 * as.h (flag_size_check): New.
417 * config/obj-elf.c (elf_frob_symbol): Use as_bad to report
418 bad .size directive only for --size-check=error.
420 * doc/as.texinfo: Document --size-check=.
422 2011-03-14 Mike Frysinger <vapier@gentoo.org>
424 * config/tc-bfin.c (bfin_cpus[]): Add 0.4 for
425 bf542/bf544/bf547/bf548/bf549.
427 2011-03-14 Richard Sandiford <richard.sandiford@linaro.org>
429 * config/tc-arm.c (md_pcrel_from_section): Use S_FORCE_RELOC to
430 determine whether a relocation is needed.
431 (md_apply_fix, arm_apply_sym_value): Likewise.
433 2011-03-14 Richard Sandiford <richard.sandiford@linaro.org>
435 * config/tc-arm.c (arm_adjust_symtab): Set the branch type
438 2011-03-11 Nick Clifton <nickc@redhat.com>
440 * remap.c (remap_debug_filename): Always allocate a buffer for the
442 * stabs.c (stabs_generate_asm_file): Free the pointer returned by
443 remap_debug_filename.
445 2011-03-10 Michael Snyder <msnyder@vmware.com>
447 Revert the following change:
448 * dwarf2dbg.c (out_file_list): Free malloced 'dir'.
449 (out_debug_info): Free malloced 'dirname' and 'comp_dir'.
451 2011-03-10 Alan Modra <amodra@gmail.com>
453 * gas/config/obj-elf.h (ELF_TARGET_SYMBOL_FIELDS,
454 TARGET_SYMBOL_FIELDS): Don't define.
455 * gas/config/tc-arc.c (arc_common): Use correct symbol "local" field.
457 2011-03-09 Michael Snyder <msnyder@vmware.com>
459 * dwarf2dbg.c (out_file_list): Free malloced 'dir'.
460 (out_debug_info): Free malloced 'dirname' and 'comp_dir'.
461 (emit_fixed_inc_line_addr): Assign instead of conditional in
464 2011-03-05 H.J. Lu <hongjiu.lu@intel.com>
466 * config/obj-elf.c (elf_frob_symbol): Mention symbol name in
467 non-constant .size expression.
469 2011-03-02 Nick Clifton <nickc@redhat.com>
471 * ecoff.c: Incldue filenames.h
473 2011-02-28 Kai Tietz <kai.tietz@onevision.com>
475 * depend.c (register_dependency): Use filename_(n)cmp.
476 * dwarf2dbg.c (get_filenum): Likewise.
477 * ecoff.c (add_file): Likewise.
478 (ecoff_generate_asm_lineno): Likewise.
479 * input-scrub.c (new_logical_line_flags): Likewise.
480 * listing.c (file_info): Likewise.
481 (listing_newline): Likewise.
482 * remap.c (remap_debug_filename): Likewise.
483 * stabs.c (generate_asm_file): Likewise.
484 (stabs_generate_asm_lineno): Likewise.
486 2011-02-28 Maciej W. Rozycki <macro@codesourcery.com>
488 * config/tc-mips.c (append_insn): Disable branch relaxation for
491 2011-02-28 Maciej W. Rozycki <macro@codesourcery.com>
493 * config/tc-mips.c (macro): Handle M_PREF_AB.
495 2011-02-28 Maciej W. Rozycki <macro@codesourcery.com>
497 * config/tc-mips.c (RELAX_BRANCH_ENCODE): Encode the temporary
499 (RELAX_BRANCH_UNCOND): Adjust accordingly.
500 (RELAX_BRANCH_LIKELY): Likewise.
501 (RELAX_BRANCH_LINK): Likewise.
502 (RELAX_BRANCH_TOOFAR): Likewise.
503 (RELAX_BRANCH_AT): New macro.
504 (append_insn): Encode the temporary register to use in standard
505 MIPS branch relaxation.
506 (relaxed_branch_length): Update according to changes to
508 (md_convert_frag): Use the encoded register as the temporary.
510 2011-02-28 Maciej W. Rozycki <macro@codesourcery.com>
512 * config/tc-mips.c (mips_fix_adjustable): On REL targets also
513 reject PC-relative relocations.
515 2011-02-28 Maciej W. Rozycki <macro@codesourcery.com>
517 * config/tc-mips.c (md_convert_frag): Correct message
520 2011-02-28 Alan Modra <amodra@gmail.com>
522 * symbols.c (report_op_error): Remove unnecessary forward declaration.
523 Add "op" parameter. Report operator and operand segments in error
524 message, not operand symbols.
525 (resolve_symbol_value): Always set segment for equated symbols, not
526 just when finalizing. Adjust report_op_error calls.
528 2011-02-25 H.J. Lu <hongjiu.lu@intel.com>
530 * config/tc-i386.c (reloc): Don't sign-check 4-byte relocations
531 if 64bit relocations aren't allowed.
533 2011-02-25 Alan Modra <amodra@gmail.com>
536 * config/obj-elf.c (elf_frob_symbol): Properly handle size expression.
538 2011-02-21 Maciej W. Rozycki <macro@codesourcery.com>
540 * config/tc-mips.c (mips_ip) <'o'>: Remove duplicate
541 initialization of offset_reloc.
543 2011-02-15 Richard Henderson <rth@redhat.com>
545 * dw2gencfi.c (dot_cfi_dummy): New.
546 (cfi_pseudo_table) [!TARGET_USE_CFIPOP]: New.
547 * read.c (pobegin): Unconditionally call cfi_pop_insert.
549 2011-02-13 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
551 * configure: Regenerate.
553 2011-02-13 Mike Frysinger <vapier@gentoo.org>
555 * config/bfin-lex.l (BYTEOP2M): Remove tokenization.
556 * config/bfin-parse.y (BYTEOP2M): Delete token.
557 (asm_1): Remove BYTEOP2M insn matching.
559 2011-02-12 Mike Frysinger <vapier@gentoo.org>
561 * config/bfin-defs.h: Include opcode/bfin.h.
562 (M_S2RND, M_T, M_W32, M_FU, M_TFU, M_IS, M_ISS2, M_IH, M_IU): Delete.
564 2011-02-11 Mike Frysinger <vapier@gentoo.org>
566 * doc/c-bfin.texi (Instruction Delimiting): Fix occur typo.
567 (Modify Registers): Fix subtracted typo.
568 (.byte2): Extend and swap descriptions with .byte4.
569 (.byte4): Extend and swap descriptions with .byte2.
570 (.db, .dw, .dd): Document behavior.
572 2011-02-11 Mike Frysinger <vapier@gentoo.org>
574 * config/bfin-parse.y (TESTSET): Reject REG_SP and REG_FP.
576 2011-02-11 Alan Modra <amodra@gmail.com>
578 * doc/c-ppc.texi (PowerPC-Opts <-nops>): Clarify.
580 2011-02-10 Alan Modra <amodra@gmail.com>
582 * doc/as.texinfo (Overview): Add missing markup around Blackfin
585 2011-02-10 Alan Modra <amodra@gmail.com>
587 * config/tc-ppc.c (md_show_usage): Remove -l and -b. Add -K PIC.
588 * doc/as.texinfo: Refer to and include c-ppc.texi for PowerPC options.
589 (Overview <Target PowerPC options>): Add a number of missing options.
590 * doc/c-ppc.texi: Likewise. Add markup for use in manpage generation.
592 2011-02-08 H.J. Lu <hongjiu.lu@intel.com>
595 * config/tc-i386.c (i386_align_code): Use f32_patt when tuning
598 2011-02-08 H.J. Lu <hongjiu.lu@intel.com>
600 * config/tc-i386.c (set_cpu_arch): Also update cpu_arch_isa_flags
602 (md_parse_option): Likewise.
604 2011-02-04 Bernd Schmidt <bernds@codesourcery.com>
606 * doc/as.texinfo (Target TIC6X options): Don't mention "-matomic".
607 * doc/c-tic6x.texi (TIC6X Directives): Don't mention ".atomic".
608 (TIC6X Options): Don't mention "-matomic".
609 * config/tc-tic6x.c (OPTION_MATOMIC, OPTION_MNO_ATOMIC): Delete.
610 (md_longopts): Remove corresponding entries.
611 (md_parse_option): Don't handle them.
612 (md_show_usage): Don't document them.
613 (tic6x_atomic): Delete variable.
614 (tic6x_update_features): Always copy tic6x_arch_enable to
616 (tic6x_arch_enable): Remove references to TIC6X_INSN_ATOMIC.
617 (s_tic6x_atomic, s_tic6x_noatomic): Remove functions.
618 (md_pseudo_table): Remove ".atomic" and ".noatomic".
620 2011-01-31 Nick Clifton <nickc@redhat.com>
622 * write.c (write_contents): Include output file name and bfd error
623 value when reporting the inability to write to the output file.
624 * config/tc-rx.c (rx_handle_align): Do not insert NOPs into align
625 frag that has a non-zero fill value.
627 2011-01-27 DJ Delorie <dj@redhat.com>
629 * config/tc-rx.c (md_convert_frag): If we can't compute the target
630 address, zero out the values stored in the object file to make
631 objdump's output consistent.
633 2011-01-26 Kai Tietz <kai.tietz@onevision.com>
635 * config/tc-i386.c (md_begin): Set for x64 windows COFF target
636 x86_dwarf2_return_column to 32.
638 2011-01-20 Nick Clifton <nickc@redhat.com>
641 * config/tc-h8300.c (constant_fits_width_p): Use correct type for
644 2011-01-18 H.J. Lu <hongjiu.lu@intel.com>
646 * write.c (compress_debug): Return if section size is smaller
649 2011-01-18 H.J. Lu <hongjiu.lu@intel.com>
652 * write.c (compress_debug): Return if section size is 0.
654 2011-01-18 Mingfeng Wu <mingfeng@faraday-tech.com>
656 * config/tc-arm.c (arm_cpus): Add Faraday ARMv5TE compatible
657 cores: fa606te, fa616te, fmp626. Modify the VFP of fa626te.
658 * doc/c-arm.texi (ARM Options): Add -mcpu={fa606te, fa616te,
661 2011-01-18 Nick Clifton <nickc@redhat.com>
664 * doc/all.texi: Add NS32K
665 * doc/as.texinfo: Remove target specific details of which
666 characters act as comment initiators and statement separators into
667 individual target specific files.
668 * doc/c-alpha.texi (Alpha-Chars): Document special behaviour of
669 the hash character at the start of a line.
670 * doc/c-arm.texi (ARM-Chars): Likewise.
671 * doc/c-avr.texi (AVR-Chars): Likewise.
672 * doc/c-d10v.texi (D10V-Chars): Likewise.
673 * doc/c-d30v.texi (D30V-Chars): Likewise.
674 * doc/c-mmix.texi (MMIX-Chars): Likewise.
675 * doc/c-s390.texi (s390 characters): Likewise.
676 * doc/c-sh.texi (SH-Chars): Likewise.
677 * doc/c-sh64.texi (SH64-Chars): Likewise.
678 * doc/c-sparc.texi (SPARC-Chars): Likewise.
679 * doc/c-tic6x.texi (TIC6X Syntax): Likewise.
680 * doc/c-xtensa.texi (Xtensa Syntax): Likewise.
681 * doc/c-z80.texi (Z80-Chars): Likewise.
682 * doc/c-z8k.texi (Z8000-Chars): Likewise.
683 * doc/c-pdp11.texi (PDP11-Syntax): Document line separator character.
684 * doc/c-arc.texi (ARC-Chars): Fill in this subsection.
685 * doc/c-bfin.texi (Blackfin Syntax): Document line comment and
686 line separator characters.
687 * doc/c-cr16.texi (CR16 Syntax): Likewise.
688 * doc/c-i386.texi (i386-Chars): Likewise.
689 * doc/c-i860.texi (i860-Chars): Likewise.
690 * doc/c-i960.texi (i960-Chars): Likewise.
691 * doc/c-ip2k.texi (IP2K-Chars): Likewise.
692 * doc/c-lm32.texi (LM32-Chars): likewise.
693 * doc/c-m32c.texi (M32C-Chars): Likewise.
694 * doc/c-m68hc11.texi (M68HC11-syntax): Likewise.
695 * doc/c-m68k.texi (M68K-Chars): Likewise.
696 * doc/c-microblaze.texi (MicroBlaze-Chars): Likewise.
697 * doc/c-msp430.texi (MSP430-Chars): Likewise.
698 * doc/c-mt.texi (MT-Chars): Likewise.
699 * doc/c-ns32k.texi (NS32K-Chars): Likewise.
700 * doc/c-pj.texi (PJ-Chars): Likewise.
701 * doc/c-ppc.texi (PowerPC-Chars): Likewise.
702 * doc/c-rx.texi (RX-Chars): Likewise.
703 * doc/c-score.texi (SCORE-Chars): Likewise.
704 * doc/c-tic54x.texi (TIC54X-Chars): Likewise.
705 * doc/c-v850.texi (V850-Chars): Likewise.
706 * doc/c-vax.texi (VAX-Chars): Likewise.
707 * doc/c-xc16x.texi (xc16x-Chars): Likewise.
709 2011-01-17 Quentin Neill <quentin.neill@amd.com>
711 * config/tc-i386.c (cpu_arch): Add CPU_TBM_FLAGS.
713 * doc/c-i386.texi (i386-TBM): New section.
715 2011-01-16 H.J. Lu <hongjiu.lu@intel.com>
717 * config/tc-i386.c (disallow_64bit_disp): Renamed to ...
718 (disallow_64bit_reloc): This.
719 (md_assemble): Don't check movabs for x32 mode here.
720 (i386_target_format): Updated.
721 (tc_gen_reloc): Check if 64bit relocations are allowed.
723 2011-01-15 H.J. Lu <hongjiu.lu@intel.com>
725 * config/tc-i386.c (disallow_64bit_disp): New.
726 (x86_elf_abi): Replace X86_64_LP64_ABI/X86_64_ILP32_ABI with
727 X86_64_ABI/X86_64_X32_ABI.
728 (md_assemble): Don't allow movabs with relocation in x32 mode.
729 (i386_target_format): Updated.
731 2011-01-14 H.J. Lu <hongjiu.lu@intel.com>
733 * config/tc-i386.c (OPTION_N32): Renamed to ...
735 (md_longopts): Replace n32 with x32.
736 (md_parse_option): Updated.
737 (md_show_usage): Likewise.
739 * doc/c-i386.texi: Replace --n32 with --x32.
741 2011-01-11 Mingjie Xing <mingjie.xing@gmail.com>
743 * config/tc-mips.c (mips_ip): Update error messages. Take an
744 unadjusted offset for "+c" argument.
746 2011-01-10 Nick Clifton <nickc@redhat.com>
748 * config/tc-i386.c (x86_elf_abi): Only define for targets that use
751 2011-01-10 Nick Clifton <nickc@redhat.com>
753 * config/tc-arm.c (s_arm_tls_desceq): Move code into ELF-only
756 2011-01-10 Nathan Sidwell <nathan@codesourcery.com>
757 Glauber de Oliveira Costa <glommer@gmail.com>
759 * doc/c-arm.texi: Document TLSDESC and TLSCALL relocations, and
760 .tlsdescseq directive.
761 * config/tc-arm.c (arm_typed_reg_parse): Check for potential reloc
763 (s_arm_tls_descseq): New directive.
764 (md_pseudo_table): Add it.
765 (encode_branch): Allow TLS_CALL relocs too.
766 (do_t_blx, do_t_branch23): Use encode_branch.
767 (reloc_names): Add tlsdesc and tlscall.
768 (md_apply_fix): Process tls desc relocations.
769 (tc_gen_reloc): Likewise.
770 (arm_fix_adjustable): Likewise.
772 2011-01-07 Quentin Neill <quentin.neill@amd.com>
774 * config/tc-i386.c (cpu_arch): Add CPU_BMI_FLAGS.
776 * doc/c-i386.texi (i386-BMI): New section.
778 2011-01-06 Paul Koning <ni1d@arrl.net>
780 * config/tc-pdp11.c (parse_op_no_deferred): Allow PC-relative
781 references to absolute addresses.
783 2011-01-05 DJ Delorie <dj@redhat.com>
785 * config/tc-rx.c (tc_gen_reloc): Emit an RX_OP_NEG expression
786 instead of an RH_NEG32 one.
788 2011-01-05 Jonathan Wakely <jwakely.gcc@gmail.com>
790 * doc/c-i386.texi: Clarify --n32.
792 2011-01-04 H.J. Lu <hongjiu.lu@intel.com>
794 * config/tc-i386.c (build_modrm_byte): Allow encoding 32/64bit
795 integer registers in VEX.vvvv. Check register-only source
796 operand when two source operands are swapped. Properly update
797 destination when two source operands are swapped.
799 2011-01-01 H.J. Lu <hongjiu.lu@intel.com>
801 * gas.c (parse_args): Update copyright to 2011.
803 For older changes see ChangeLog-2010
809 version-control: never